Update for 2015.08.1

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

.defconfig

@@ -15,9 +15,11 @@ BR2_i386=y
 # BR2_nios2 is not set
 # BR2_powerpc is not set
 # BR2_sh is not set
+# BR2_sh64 is not set
 # BR2_sparc is not set
 # BR2_sparc64 is not set
 # BR2_x86_64 is not set
+# BR2_x86_i386 is not set
 # BR2_x86_i486 is not set
 # BR2_x86_i586 is not set
 BR2_x86_i686=y

COPYING

@@ -1,19 +1,3 @@
-With the exceptions below, Buildroot is distributed under the terms of
-the GNU General Public License, reproduced below; either version 2 of
-the License, or (at your option) any later version.
-
-Some files in Buildroot contain a different license statement. Those
-files are licensed under the license contained in the file itself.
-
-Buildroot also bundles patch files, which are applied to the sources
-of the various packages. Those patches are not covered by the license
-of Buildroot. Instead, they are covered by the license of the software
-to which the patches are applied. When said software is available
-under multiple licenses, the Buildroot patches are only provided under
-the publicly accessible licenses.
-
------------------------------------------------------------------
-
 		    GNU GENERAL PUBLIC LICENSE
 		       Version 2, June 1991
 

Config.in

@@ -14,48 +14,9 @@ config BR2_HOSTARCH
 	string
 	option env="HOSTARCH"
 
-config BR2_BUILD_DIR
+config BR2_EXTERNAL
 	string
-	option env="BUILD_DIR"
-
-# Hidden config symbols for packages to check system gcc version
-config BR2_HOST_GCC_VERSION
-	string
-	option env="HOST_GCC_VERSION"
-
-config BR2_HOST_GCC_AT_LEAST_4_5
-	bool
-	default y if BR2_HOST_GCC_VERSION = "4 5"
-
-config BR2_HOST_GCC_AT_LEAST_4_6
-	bool
-	default y if BR2_HOST_GCC_VERSION = "4 6"
-	select BR2_HOST_GCC_AT_LEAST_4_5
-
-config BR2_HOST_GCC_AT_LEAST_4_7
-	bool
-	default y if BR2_HOST_GCC_VERSION = "4 7"
-	select BR2_HOST_GCC_AT_LEAST_4_6
-
-config BR2_HOST_GCC_AT_LEAST_4_8
-	bool
-	default y if BR2_HOST_GCC_VERSION = "4 8"
-	select BR2_HOST_GCC_AT_LEAST_4_7
-
-config BR2_HOST_GCC_AT_LEAST_4_9
-	bool
-	default y if BR2_HOST_GCC_VERSION = "4 9"
-	select BR2_HOST_GCC_AT_LEAST_4_8
-
-config BR2_HOST_GCC_AT_LEAST_5
-	bool
-	default y if BR2_HOST_GCC_VERSION = "5"
-	select BR2_HOST_GCC_AT_LEAST_4_9
-
-config BR2_HOST_GCC_AT_LEAST_6
-	bool
-	default y if BR2_HOST_GCC_VERSION = "6"
-	select BR2_HOST_GCC_AT_LEAST_5
+	option env="BR2_EXTERNAL"
 
 # Hidden boolean selected by packages in need of Java in order to build
 # (example: xbmc)
@@ -84,11 +45,6 @@ config BR2_HOSTARCH_NEEDS_IA32_LIBS
 config BR2_HOSTARCH_NEEDS_IA32_COMPILER
 	bool
 
-# Hidden boolean selected by packages that need the host to have an
-# UTF8 locale.
-config BR2_NEEDS_HOST_UTF8_LOCALE
-	bool
-
 source "arch/Config.in"
 
 menu "Build options"
@@ -135,9 +91,9 @@ config BR2_ZCAT
 	string "zcat command"
 	default "gzip -d -c"
 	help
-	  Command to be used to extract a gzip'ed file to stdout. zcat
-	  is identical to gunzip -c except that the former may not be
-	  available on your system.
+	  Command to be used to extract a gzip'ed file to stdout.
+	  zcat is identical to gunzip -c except that the former may
+	  not be available on your system.
 	  Default is "gzip -d -c"
 	  Other possible values include "gunzip -c" or "zcat".
 
@@ -158,13 +114,6 @@ config BR2_XZCAT
 	  Command to be used to extract a xz'ed file to stdout.
 	  Default is "xzcat"
 
-config BR2_LZCAT
-	string "lzcat command"
-	default "lzip -d -c"
-	help
-	  Command to be used to extract a lzip'ed file to stdout.
-	  Default is "lzip -d -c"
-
 config BR2_TAR_OPTIONS
 	string "Tar options"
 	default ""
@@ -184,8 +133,8 @@ config BR2_DEFCONFIG
 	default BR2_DEFCONFIG_FROM_ENV if BR2_DEFCONFIG_FROM_ENV != ""
 	default "$(CONFIG_DIR)/defconfig"
 	help
-	  When running 'make savedefconfig', the defconfig file will be
-	  saved in this location.
+	  When running 'make savedefconfig', the defconfig file will be saved
+	  in this location.
 
 config BR2_DL_DIR
 	string "Download dir"
@@ -193,8 +142,7 @@ config BR2_DL_DIR
 	help
 	  Directory to store all the source files that we need to fetch.
 	  If the Linux shell environment has defined the BR2_DL_DIR
-	  environment variable, then this overrides this configuration
-	  item.
+	  environment variable, then this overrides this configuration item.
 
 	  The default is $(TOPDIR)/dl
 
@@ -202,9 +150,9 @@ config BR2_HOST_DIR
 	string "Host dir"
 	default "$(BASE_DIR)/host"
 	help
-	  Directory to store all the binary files that are built for the
-	  host. This includes the cross compilation toolchain when
-	  building the internal buildroot toolchain.
+	  Directory to store all the binary files that are built for the host.
+	  This includes the cross compilation toolchain when building the
+	  internal buildroot toolchain.
 
 	  The default is $(BASE_DIR)/host
 
@@ -214,13 +162,11 @@ config BR2_PRIMARY_SITE
 	string "Primary download site"
 	default ""
 	help
-	  Primary site to download from. If this option is set then
-	  buildroot will try to download package source first from this
-	  site and try the default if the file is not found.
-	  Valid URIs are:
-	    - URIs recognized by $(WGET)
-	    - local URIs of the form file://absolutepath
-	    - scp URIs of the form scp://[user@]host:path.
+	  Primary site to download from. If this option is set then buildroot
+	  will try to download package source first from this site and try the
+	  default if the file is not found.
+	  Valid URIs are URIs recognized by $(WGET) and scp URIs of the form
+	  scp://[user@]host:path.
 
 config BR2_PRIMARY_SITE_ONLY
 	bool "Only allow downloads from primary download site"
@@ -229,11 +175,11 @@ config BR2_PRIMARY_SITE_ONLY
 	  If this option is enabled, downloads will only be attempted
 	  from the primary download site. Other locations, like the
 	  package's official download location or the backup download
-	  site, will not be considered. Therefore, if the package is not
-	  present on the primary site, the download fails.
+	  site, will not be considered. Therefore, if the package is
+	  not present on the primary site, the download fails.
 
-	  This is useful for project developers who want to ensure that
-	  the project can be built even if the upstream tarball
+	  This is useful for project developers who want to ensure
+	  that the project can be built even if the upstream tarball
 	  locations disappear.
 
 if !BR2_PRIMARY_SITE_ONLY
@@ -242,36 +188,32 @@ config BR2_BACKUP_SITE
 	string "Backup download site"
 	default "http://sources.buildroot.net"
 	help
-	  Backup site to download from. If this option is set then
-	  buildroot will fall back to download package sources from here
-	  if the normal location fails.
+	  Backup site to download from. If this option is set then buildroot
+	  will fall back to download package sources from here if the
+	  normal location fails.
 
 config BR2_KERNEL_MIRROR
 	string "Kernel.org mirror"
-	default "https://cdn.kernel.org/pub"
+	default "https://www.kernel.org/pub"
 	help
-	  kernel.org is mirrored on a number of servers around the
-	  world. The following allows you to select your preferred
-	  mirror. By default, a CDN is used, which automatically
-	  redirects to a mirror geographically close to you.
+	  kernel.org is mirrored on a number of servers around the world.
+	  The following allows you to select your preferred mirror.
 
-	  Have a look on the kernel.org site for a list of mirrors, then
-	  enter the URL to the base directory. Examples:
+	  Have a look on the kernel.org site for a list of mirrors, then enter
+	  the URL to the base directory.  Examples:
 
 	     http://www.XX.kernel.org/pub (XX = country code)
 	     http://mirror.aarnet.edu.au/pub/ftp.kernel.org
 
 config BR2_GNU_MIRROR
 	string "GNU Software mirror"
-	default "http://ftpmirror.gnu.org"
+	default "http://ftp.gnu.org/pub/gnu"
 	help
-	  GNU has multiple software mirrors scattered around the
-	  world. The following allows you to select your preferred
-	  mirror. By default, a generic address is used, which
-	  automatically selects an up-to-date and local mirror.
+	  GNU has multiple software mirrors scattered around the world.
+	  The following allows you to select your preferred mirror.
 
-	  Have a look on the gnu.org site for a list of mirrors, then
-	  enter the URL to the base directory. Examples:
+	  Have a look on the gnu.org site for a list of mirrors, then enter
+	  the URL to the base directory.  Examples:
 
 	     http://ftp.gnu.org/pub/gnu
 	     http://mirror.aarnet.edu.au/pub/gnu
@@ -288,8 +230,8 @@ config BR2_CPAN_MIRROR
 	string "CPAN mirror (Perl packages)"
 	default "http://cpan.metacpan.org"
 	help
-	  CPAN (Comprehensive Perl Archive Network) is a repository of
-	  Perl packages. It has multiple software mirrors scattered
+	  CPAN (Comprehensive Perl Archive Network) is a repository
+	  of Perl packages. It has multiple software mirrors scattered
 	  around the world. This option allows you to select a mirror.
 
 	  The list of mirrors is available at:
@@ -303,22 +245,24 @@ config BR2_JLEVEL
 	int "Number of jobs to run simultaneously (0 for auto)"
 	default "0"
 	help
-	  Number of jobs to run simultaneously. If 0, determine
-	  automatically according to number of CPUs on the host system.
+	  Number of jobs to run simultaneously.  If 0, determine
+	  automatically according to number of CPUs on the host
+	  system.
 
 config BR2_CCACHE
 	bool "Enable compiler cache"
 	help
-	  This option will enable the use of ccache, a compiler cache.
-	  It will cache the result of previous builds to speed up future
-	  builds. By default, the cache is stored in
+	  This option will enable the use of ccache, a compiler
+	  cache. It will cache the result of previous builds to speed
+	  up future builds. By default, the cache is stored in
 	  $HOME/.buildroot-ccache.
 
 	  Note that Buildroot does not try to invalidate the cache
-	  contents when the compiler changes in an incompatible way.
-	  Therefore, if you make a change to the compiler version and/or
-	  configuration, you are responsible for purging the ccache
-	  cache by removing the $HOME/.buildroot-ccache directory.
+	  contents when the compiler changes in an incompatible
+	  way. Therefore, if you make a change to the compiler version
+	  and/or configuration, you are responsible for purging the
+	  ccache cache by removing the $HOME/.buildroot-ccache
+	  directory.
 
 if BR2_CCACHE
 
@@ -331,46 +275,42 @@ config BR2_CCACHE_DIR
 config BR2_CCACHE_INITIAL_SETUP
 	string "Compiler cache initial setup"
 	help
-	  Initial ccache settings to apply, such as --max-files or
-	  --max-size.
+	  Initial ccache settings to apply, such as --max-files or --max-size.
 
-	  For example, if your project is known to require more space
-	  than the default max cache size, then you might want to
-	  increase the cache size to a suitable amount using the -M
-	  (--max-size) option.
+	  For example, if your project is known to require more space than the
+	  default max cache size, then you might want to increase the cache size
+	  to a suitable amount using the -M (--max-size) option.
 
-	  The string you specify here is passed verbatim to ccache.
-	  Refer to ccache documentation for more details.
+	  The string you specify here is passed verbatim to ccache.  Refer to
+	  ccache documentation for more details.
 
-	  These initial settings are applied after ccache has been
-	  compiled.
+	  These initial settings are applied after ccache has been compiled.
 
-config BR2_CCACHE_USE_BASEDIR
-	bool "Use relative paths"
-	default y
+endif
+
+config BR2_DEPRECATED
+	bool "Show options and packages that are deprecated or obsolete"
 	help
-	  Allow ccache to convert absolute paths within the output
-	  directory into relative paths.
+	  This option shows outdated/obsolete versions of packages and
+	  options that are otherwise hidden.
 
-	  During the build, many -I include directives are given with an
-	  absolute path. These absolute paths end up in the hashes that
-	  are computed by ccache. Therefore, when you build from a
-	  different directory, the hash will be different and the cached
-	  object will not be used.
+if BR2_DEPRECATED
 
-	  To improve cache performance, set this option to y. This
-	  allows ccache to rewrite absolute paths within the output
-	  directory into relative paths. Note that only paths within the
-	  output directory will be rewritten; therefore, if you change
-	  BR2_HOST_DIR to point outside the output directory and
-	  subsequently move it to a different location, this will lead
-	  to cache misses.
+config BR2_DEPRECATED_SINCE_2014_08
+	bool
+	default y
 
-	  This option has as a result that the debug information in the
-	  object files also has only relative paths. Therefore, make
-	  sure you cd to the build directory before starting gdb. See
-	  the section "COMPILING IN DIFFERENT DIRECTORIES" in the ccache
-	  manual for more information.
+config BR2_DEPRECATED_SINCE_2015_02
+	bool
+	default y
+
+config BR2_DEPRECATED_SINCE_2015_05
+	bool
+	default y
+
+config BR2_DEPRECATED_SINCE_2015_08
+	bool
+	default y
 
 endif
 
@@ -394,11 +334,11 @@ choice
 config BR2_DEBUG_1
 	bool "debug level 1"
 	help
-	  Debug level 1 produces minimal information, enough for making
-	  backtraces in parts of the program that you don't plan to
-	  debug. This includes descriptions of functions and external
-	  variables, but no information about local variables and no
-	  line numbers.
+	  Debug level 1 produces minimal information, enough
+	  for making backtraces in parts of the program that
+	  you don't plan to debug. This includes descriptions
+	  of functions and external variables, but no information
+	  about local variables and no line numbers.
 
 config BR2_DEBUG_2
 	bool "debug level 2"
@@ -408,9 +348,9 @@ config BR2_DEBUG_2
 config BR2_DEBUG_3
 	bool "debug level 3"
 	help
-	  Level 3 includes extra information, such as all the macro
-	  definitions present in the program. Some debuggers support
-	  macro expansion when you use -g3.
+	  Level 3 includes extra information, such as all the
+	  macro definitions present in the program. Some debuggers
+	  support macro expansion when you use -g3.
 endchoice
 endif
 
@@ -423,15 +363,16 @@ config BR2_STRIP_strip
 	depends on !BR2_PACKAGE_HOST_ELF2FLT
 	help
 	  Binaries and libraries in the target filesystem will be
-	  stripped using the normal 'strip' command. This allows to save
-	  space, mainly by removing debugging symbols. Debugging symbols
-	  on the target are needed for native debugging, but not when
-	  remote debugging is used.
+	  stripped using the normal 'strip' command. This allows to
+	  save space, mainly by removing debugging symbols. Debugging
+	  symbols on the target are needed for native debugging, but
+	  not when remote debugging is used.
 
 config BR2_STRIP_none
 	bool "none"
 	help
-	  Do not strip binaries and libraries in the target filesystem.
+	  Do not strip binaries and libraries in the target
+	  filesystem.
 endchoice
 
 config BR2_STRIP_EXCLUDE_FILES
@@ -439,19 +380,19 @@ config BR2_STRIP_EXCLUDE_FILES
 	depends on !BR2_STRIP_none
 	default ""
 	help
-	  You may specify a space-separated list of binaries and
-	  libraries here that should not be stripped on the target.
+	  You may specify a space-separated list of binaries and libraries
+	  here that should not be stripped on the target.
 
 config BR2_STRIP_EXCLUDE_DIRS
 	string "directories that should be skipped when stripping"
 	depends on !BR2_STRIP_none
 	default ""
 	help
-	  You may specify a space-separated list of directories that
-	  should be skipped when stripping. Binaries and libraries in
-	  these directories will not be touched. The directories should
-	  be specified relative to the target directory, without leading
-	  slash.
+	  You may specify a space-separated list of directories that should
+	  be skipped when stripping. Binaries and libraries in these
+	  directories will not be touched.
+	  The directories should be specified relative to the target directory,
+	  without leading slash.
 
 choice
 	prompt "gcc optimization level"
@@ -467,67 +408,54 @@ config BR2_OPTIMIZE_0
 config BR2_OPTIMIZE_1
 	bool "optimization level 1"
 	help
-	  Optimize. Optimizing compilation takes somewhat more time, and
-	  a lot more memory for a large function. With -O, the compiler
-	  tries to reduce code size and execution time, without
-	  performing any optimizations that take a great deal of
-	  compilation time. -O turns on the following optimization
+	  Optimize. Optimizing compilation takes somewhat more time,
+	  and a lot more memory for a large function. With -O, the
+	  compiler tries to reduce code size and execution time,
+	  without performing any optimizations that take a great deal
+	  of compilation time. -O turns on the following optimization
 	  flags: -fdefer-pop -fdelayed-branch -fguess-branch-probability
 	  -fcprop-registers -floop-optimize -fif-conversion
 	  -fif-conversion2 -ftree-ccp -ftree-dce -ftree-dominator-opts
 	  -ftree-dse -ftree-ter -ftree-lrs -ftree-sra -ftree-copyrename
-	  -ftree-fre -ftree-ch -funit-at-a-time -fmerge-constants. -O
-	  also turns on -fomit-frame-pointer on machines where doing so
-	  does not interfere with debugging.
+	  -ftree-fre -ftree-ch -funit-at-a-time -fmerge-constants
+	  -O also turns on -fomit-frame-pointer on machines where doing
+	  so does not interfere with debugging.
 
 config BR2_OPTIMIZE_2
 	bool "optimization level 2"
 	help
-	  Optimize even more. GCC performs nearly all supported
-	  optimizations that do not involve a space-speed tradeoff. The
-	  compiler does not perform loop unrolling or function inlining
-	  when you specify -O2. As compared to -O, this option increases
-	  both compilation time and the performance of the generated
-	  code. -O2 turns on all optimization flags specified by -O. It
-	  also turns on the following optimization flags:
-	  -fthread-jumps -fcrossjumping -foptimize-sibling-calls
+	  Optimize even more. GCC performs nearly all supported optimizations
+	  that do not involve a space-speed tradeoff. The compiler does not
+	  perform loop unrolling or function inlining when you specify -O2.
+	  As compared to -O, this option increases both compilation time and
+	  the performance of the generated code. -O2 turns on all optimization
+	  flags specified by -O. It also turns on the following optimization
+	  flags: -fthread-jumps -fcrossjumping -foptimize-sibling-calls
 	  -fcse-follow-jumps -fcse-skip-blocks -fgcse  -fgcse-lm
-	  -fexpensive-optimizations -fstrength-reduce
-	  -frerun-cse-after-loop -frerun-loop-opt -fcaller-saves
-	  -fpeephole2 -fschedule-insns -fschedule-insns2
-	  -fsched-interblock -fsched-spec -fregmove -fstrict-aliasing
-	  -fdelete-null-pointer-checks -freorder-blocks
-	  -freorder-functions -falign-functions -falign-jumps
-	  -falign-loops -falign-labels -ftree-vrp -ftree-pre. Please
-	  note the warning under -fgcse about invoking -O2 on programs
+	  -fexpensive-optimizations -fstrength-reduce -frerun-cse-after-loop
+	  -frerun-loop-opt -fcaller-saves -fpeephole2 -fschedule-insns
+	  -fschedule-insns2 -fsched-interblock -fsched-spec -fregmove
+	  -fstrict-aliasing -fdelete-null-pointer-checks -freorder-blocks
+	  -freorder-functions -falign-functions -falign-jumps -falign-loops
+	  -falign-labels -ftree-vrp -ftree-pre
+	  Please note the warning under -fgcse about invoking -O2 on programs
 	  that use computed gotos.
 
 config BR2_OPTIMIZE_3
 	bool "optimization level 3"
 	help
-	  Optimize yet more. -O3 turns on all optimizations specified by
-	  -O2 and also turns on the -finline-functions, -funswitch-loops
-	  and -fgcse-after-reload options.
-
-config BR2_OPTIMIZE_G
-	bool "optimize for debugging"
-	depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_8
-	help
-	  Optimize for debugging. This enables optimizations that do not
-	  interfere with debugging. It should be the optimization level
-	  of choice for the standard edit-compile-debug cycle, offering
-	  a reasonable level of optimization while maintaining fast
-	  compilation and a good debugging experience.
+	  Optimize yet more. -O3 turns on all optimizations specified by -O2
+	  and also turns on the -finline-functions, -funswitch-loops and
+	  -fgcse-after-reload options.
 
 config BR2_OPTIMIZE_S
 	bool "optimize for size"
 	help
-	  Optimize for size. -Os enables all -O2 optimizations that do
-	  not typically increase code size. It also performs further
-	  optimizations designed to reduce code size. -Os disables the
-	  following optimization flags: -falign-functions -falign-jumps
-	  -falign-loops -falign-labels -freorder-blocks
-	  -freorder-blocks-and-partition -fprefetch-loop-arrays
+	  Optimize for size. -Os enables all -O2 optimizations that do not
+	  typically increase code size. It also performs further optimizations
+	  designed to reduce code size. -Os disables the following optimization
+	  flags: -falign-functions -falign-jumps -falign-loops -falign-labels
+	  -freorder-blocks -freorder-blocks-and-partition -fprefetch-loop-arrays
 	  -ftree-vect-loop-version
 
 endchoice
@@ -536,20 +464,16 @@ config BR2_GOOGLE_BREAKPAD_ENABLE
 	bool "Enable google-breakpad support"
 	select BR2_PACKAGE_GOOGLE_BREAKPAD
 	depends on BR2_INSTALL_LIBSTDCPP
-	depends on BR2_HOST_GCC_AT_LEAST_4_8 # C++11
-	depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_8 # C++11
-	depends on BR2_USE_WCHAR
-	depends on BR2_TOOLCHAIN_HAS_THREADS
-	depends on (BR2_TOOLCHAIN_USES_GLIBC || BR2_TOOLCHAIN_USES_UCLIBC)
+	depends on BR2_TOOLCHAIN_USES_GLIBC
 	depends on BR2_PACKAGE_GOOGLE_BREAKPAD_ARCH_SUPPORTS
 	help
-	  This option will enable the use of google breakpad, a library
-	  and tool suite that allows you to distribute an application to
-	  users with compiler-provided debugging information removed,
-	  record crashes in compact "minidump" files, send them back to
-	  your server and produce C and C++ stack traces from these
-	  minidumps. Breakpad can also write minidumps on request for
-	  programs that have not crashed.
+	  This option will enable the use of google breakpad, a
+	  library and tool suite that allows you to distribute an
+	  application to users with compiler-provided debugging
+	  information removed, record crashes in compact "minidump"
+	  files, send them back to your server and produce C and C++
+	  stack traces from these minidumps.  Breakpad can also write
+	  minidumps on request for programs that have not crashed.
 
 if BR2_GOOGLE_BREAKPAD_ENABLE
 
@@ -569,59 +493,21 @@ config BR2_GOOGLE_BREAKPAD_INCLUDE_FILES
 
 endif
 
-choice
+config BR2_ENABLE_SSP
 	bool "build code with Stack Smashing Protection"
-	default BR2_SSP_ALL if BR2_ENABLE_SSP # legacy
 	depends on BR2_TOOLCHAIN_HAS_SSP
 	help
-	  Enable stack smashing protection support using GCC's
-	  -fstack-protector option family.
+	  Enable stack smashing protection support using GCCs
+	  -fstack-protector-all option.
 
-	  See
-	  http://www.linuxfromscratch.org/hints/downloads/files/ssp.txt
+	  See http://www.linuxfromscratch.org/hints/downloads/files/ssp.txt
 	  for details.
 
-	  Note that this requires the toolchain to have SSP support.
-	  This is always the case for glibc and eglibc toolchain, but is
-	  optional in uClibc toolchains.
+	  Note that this requires the toolchain to have SSP
+	  support. This is always the case for glibc and eglibc
+	  toolchain, but is optional in uClibc toolchains.
 
-config BR2_SSP_NONE
-	bool "None"
-	help
-	  Disable stack-smashing protection.
-
-config BR2_SSP_REGULAR
-	bool "-fstack-protector"
-	help
-	  Emit extra code to check for buffer overflows, such as stack
-	  smashing attacks. This is done by adding a guard variable to
-	  functions with vulnerable objects. This includes functions
-	  that call alloca, and functions with buffers larger than 8
-	  bytes. The guards are initialized when a function is entered
-	  and then checked when the function exits. If a guard check
-	  fails, an error message is printed and the program exits.
-
-config BR2_SSP_STRONG
-	bool "-fstack-protector-strong"
-	depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9
-	help
-	  Like -fstack-protector but includes additional functions to be
-	  protected - those that have local array definitions, or have
-	  references to local frame addresses.
-
-comment "Stack Smashing Protection strong needs a toolchain w/ gcc >= 4.9"
-	depends on !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9
-
-config BR2_SSP_ALL
-	bool "-fstack-protector-all"
-	help
-	  Like -fstack-protector except that all functions are
-	  protected. This option might have a significant performance
-	  impact on the compiled binaries.
-
-endchoice
-
-comment "Stack Smashing Protection needs a toolchain w/ SSP"
+comment "enabling Stack Smashing Protection requires support in the toolchain"
 	depends on !BR2_TOOLCHAIN_HAS_SSP
 
 choice
@@ -631,19 +517,20 @@ choice
 	help
 	  Select the type of libraries you want to use on the target.
 
-	  The default is to build dynamic libraries and use those on the
-	  target filesystem, except when the architecture and/or the
-	  selected binary format does not support shared libraries.
+	  The default is to build dynamic libraries and use those on
+	  the target filesystem, except when the architecture and/or
+	  the selected binary format does not support shared
+	  libraries.
 
 config BR2_STATIC_LIBS
 	bool "static only"
 	help
-	  Build and use only static libraries. No shared libraries will
-	  be installed on the target. This potentially increases your
-	  code size and should only be used if you know what you are
-	  doing. Note that some packages may not be available when this
-	  option is enabled, due to their need for dynamic library
-	  support.
+	  Build and use only static libraries. No shared libraries
+	  will be instaled on the target. This potentially increases
+	  your code size and should only be used if you know what you
+	  are doing. Note that some packages may not be available when
+	  this option is enabled, due to their need for dynamic
+	  library support.
 
 config BR2_SHARED_LIBS
 	bool "shared only"
@@ -669,66 +556,47 @@ config BR2_PACKAGE_OVERRIDE_FILE
 	default "$(CONFIG_DIR)/local.mk"
 	help
 	  A package override file is a short makefile that contains
-	  variable definitions of the form <pkg>_OVERRIDE_SRCDIR, which
-	  allows to tell Buildroot to use an existing directory as the
-	  source directory for a particular package. See the Buildroot
-	  documentation for more details on this feature.
+	  variable definitions of the form <pkg>_OVERRIDE_SRCDIR,
+	  which allows to tell Buildroot to use an existing directory
+	  as the source directory for a particular package. See the
+	  Buildroot documentation for more details on this feature.
 
 config BR2_GLOBAL_PATCH_DIR
 	string "global patch directories"
 	help
-	  You may specify a space separated list of one or more
-	  directories containing global package patches. For a specific
-	  version <packageversion> of a specific package <packagename>,
-	  patches are applied as follows:
+	  You may specify a space separated list of one or more directories
+	  containing global package patches. For a specific version
+	  <packageversion> of a specific package <packagename>, patches are
+	  applied as follows:
 
-	  First, the default Buildroot patch set for the package is
-	  applied from the package's directory in Buildroot.
+	  First, the default Buildroot patch set for the package is applied
+	  from the package's directory in Buildroot.
 
 	  Then for every directory - <global-patch-dir> - that exists in
 	  BR2_GLOBAL_PATCH_DIR, if the directory
-	  <global-patch-dir>/<packagename>/<packageversion>/ exists,
-	  then all *.patch files in this directory will be applied.
+	  <global-patch-dir>/<packagename>/<packageversion>/ exists, then all
+	  *.patch files in this directory will be applied.
 
-	  Otherwise, if the directory <global-patch-dir>/<packagename>
-	  exists, then all *.patch files in the directory will be
-	  applied.
+	  Otherwise, if the directory <global-patch-dir>/<packagename> exists,
+	  then all *.patch files in the directory will be applied.
 
 menu "Advanced"
 
 config BR2_COMPILER_PARANOID_UNSAFE_PATH
 	bool "paranoid check of library/header paths"
-	default y
 	help
 	  By default, when this option is disabled, when the Buildroot
-	  cross-compiler will encounter an unsafe library or header path
-	  (such as /usr/include, or /usr/lib), the compiler will display
-	  a warning.
+	  cross-compiler will encounter an unsafe library or header
+	  path (such as /usr/include, or /usr/lib), the compiler will
+	  display a warning.
 
-	  By enabling this option, this warning is turned into an error,
-	  which will completely abort the build when such unsafe paths
-	  are encountered.
+	  By enabling this option, this warning is turned into an
+	  error, which will completely abort the build when such
+	  unsafe paths are encountered.
 
 	  Note that this mechanism is available for both the internal
-	  toolchain (through the toolchain wrapper and binutils patches)
-	  and external toolchain backends (through the toolchain wrapper).
-
-config BR2_REPRODUCIBLE
-	bool "Make the build reproducible (experimental)"
-	help
-	  This option will remove all sources of non-reproducibility
-	  from the build process. For a given Buildroot configuration,
-	  this allows to generate exactly identical binaries from one
-	  build to the other, including on different machines.
-
-	  The current implementation is restricted to builds with the
-	  same output directory. Many (absolute) paths are recorded in
-	  intermediary files, and it is very likely that some of these
-	  paths leak into the target rootfs. If you build with the
-	  same O=... path, however, the result is identical.
-
-	  This is labeled as an experimental feature, as not all
-	  packages behave properly to ensure reproducibility.
+	  toolchain (through gcc and binutils patches) and external
+	  toolchain backends (through the external toolchain wrapper).
 
 endmenu
 
@@ -750,4 +618,9 @@ source "package/Config.in.host"
 
 source "Config.in.legacy"
 
-source "$BR2_BUILD_DIR/.br2-external.in"
+menu "User-provided options"
+	depends on BR2_EXTERNAL != "support/dummy-external"
+
+source "$BR2_EXTERNAL/Config.in"
+
+endmenu

Makefile

@@ -2,7 +2,7 @@
 #
 # Copyright (C) 1999-2005 by Erik Andersen <andersen@codepoet.org>
 # Copyright (C) 2006-2014 by the Buildroot developers <buildroot@uclibc.org>
-# Copyright (C) 2014-2017 by the Buildroot developers <buildroot@buildroot.org>
+# Copyright (C) 2014 by the Buildroot developers <buildroot@buildroot.org>
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -24,71 +24,24 @@
 # You shouldn't need to mess with anything beyond this point...
 #--------------------------------------------------------------
 
-# Delete default rules. We don't use them. This saves a bit of time.
-.SUFFIXES:
-
-# we want bash as shell
-SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
-	 else if [ -x /bin/bash ]; then echo /bin/bash; \
-	 else echo sh; fi; fi)
-
-# Set O variable if not already done on the command line;
-# or avoid confusing packages that can use the O=<dir> syntax for out-of-tree
-# build by preventing it from being forwarded to sub-make calls.
-ifneq ("$(origin O)", "command line")
-O := $(CURDIR)/output
-endif
-
-# Check if the current Buildroot execution meets all the pre-requisites.
-# If they are not met, Buildroot will actually do its job in a sub-make meeting
-# its pre-requisites, which are:
-#  1- Permissive enough umask:
-#       Wrong or too restrictive umask will prevent Buildroot and packages from
-#       creating files and directories.
-#  2- Absolute canonical CWD (i.e. $(CURDIR)):
-#       Otherwise, some packages will use CWD as-is, others will compute its
-#       absolute canonical path. This makes harder tracking and fixing host
-#       machine path leaks.
-#  3- Absolute canonical output location (i.e. $(O)):
-#       For the same reason as the one for CWD.
-
-# Remove the trailing '/.' from $(O) as it can be added by the makefile wrapper
-# installed in the $(O) directory.
-# Also remove the trailing '/' the user can set when on the command line.
-override O := $(patsubst %/,%,$(patsubst %.,%,$(O)))
-# Make sure $(O) actually exists before calling realpath on it; this is to
-# avoid empty CANONICAL_O in case on non-existing entry.
-CANONICAL_O := $(shell mkdir -p $(O) >/dev/null 2>&1)$(realpath $(O))
-
-CANONICAL_CURDIR = $(realpath $(CURDIR))
-
-REQ_UMASK = 0022
-
-# Make sure O= is passed (with its absolute canonical path) everywhere the
-# toplevel makefile is called back.
-EXTRAMAKEARGS := O=$(CANONICAL_O)
-
-# Check Buildroot execution pre-requisites here.
-ifneq ($(shell umask):$(CURDIR):$(O),$(REQ_UMASK):$(CANONICAL_CURDIR):$(CANONICAL_O))
+# Trick for always running with a fixed umask
+UMASK = 0022
+ifneq ($(shell umask),$(UMASK))
 .PHONY: _all $(MAKECMDGOALS)
 
 $(MAKECMDGOALS): _all
 	@:
 
 _all:
-	@umask $(REQ_UMASK) && \
-		$(MAKE) -C $(CANONICAL_CURDIR) --no-print-directory \
-			$(MAKECMDGOALS) $(EXTRAMAKEARGS)
+	@umask $(UMASK) && $(MAKE) --no-print-directory $(MAKECMDGOALS)
 
-else # umask / $(CURDIR) / $(O)
+else # umask
 
 # This is our default rule, so must come first
 all:
 
 # Set and export the version string
-export BR2_VERSION := 2017.02.2
-# Actual time the release is cut (for reproducible builds)
-BR2_VERSION_EPOCH = 1493676000
+export BR2_VERSION := 2015.08.1
 
 # Save running make version since it's clobbered by the make package
 RUNNING_MAKE_VERSION := $(MAKE_VERSION)
@@ -99,6 +52,16 @@ ifneq ($(firstword $(sort $(RUNNING_MAKE_VERSION) $(MIN_MAKE_VERSION))),$(MIN_MA
 $(error You have make '$(RUNNING_MAKE_VERSION)' installed. GNU make >= $(MIN_MAKE_VERSION) is required)
 endif
 
+export HOSTARCH := $(shell uname -m | \
+	sed -e s/i.86/x86/ \
+	    -e s/sun4u/sparc64/ \
+	    -e s/arm.*/arm/ \
+	    -e s/sa110/arm/ \
+	    -e s/ppc64/powerpc64/ \
+	    -e s/ppc/powerpc/ \
+	    -e s/macppc/powerpc/\
+	    -e s/sh.*/sh/)
+
 # Parallel execution of this Makefile is disabled because it changes
 # the packages building order, that can be a problem for two reasons:
 # - If a package has an unspecified optional dependency and that
@@ -116,7 +79,7 @@ endif
 .NOTPARALLEL:
 
 # absolute path
-TOPDIR := $(CURDIR)
+TOPDIR := $(shell pwd)
 CONFIG_CONFIG_IN = Config.in
 CONFIG = support/kconfig
 DATE := $(shell date +%Y%m%d)
@@ -128,8 +91,7 @@ export BR2_VERSION_FULL := $(BR2_VERSION)$(shell $(TOPDIR)/support/scripts/setlo
 noconfig_targets := menuconfig nconfig gconfig xconfig config oldconfig randconfig \
 	defconfig %_defconfig allyesconfig allnoconfig silentoldconfig release \
 	randpackageconfig allyespackageconfig allnopackageconfig \
-	print-version olddefconfig distclean manual manual-html manual-split-html \
-	manual-pdf manual-text manual-epub
+	print-version olddefconfig
 
 # Some global targets do not trigger a build, but are used to collect
 # metadata, or do various checks. When such targets are triggered,
@@ -140,63 +102,80 @@ noconfig_targets := menuconfig nconfig gconfig xconfig config oldconfig randconf
 # We're building in two situations: when MAKECMDGOALS is empty
 # (default target is to build), or when MAKECMDGOALS contains
 # something else than one of the nobuild_targets.
-nobuild_targets := source %-source source-check \
-	legal-info %-legal-info external-deps _external-deps \
-	clean distclean help show-targets graph-depends \
-	%-graph-depends %-show-depends %-show-version \
-	graph-build graph-size list-defconfigs \
-	savedefconfig printvars
+nobuild_targets := source source-check \
+	legal-info external-deps _external-deps \
+	clean distclean
 ifeq ($(MAKECMDGOALS),)
 BR_BUILDING = y
 else ifneq ($(filter-out $(nobuild_targets),$(MAKECMDGOALS)),)
 BR_BUILDING = y
 endif
 
-# We call make recursively to build packages. The command-line overrides that
-# are passed to Buildroot don't apply to those package build systems. In
-# particular, we don't want to pass down the O=<dir> option for out-of-tree
-# builds, because the value specified on the command line will not be correct
-# for packages.
-MAKEOVERRIDES :=
+# Strip quotes and then whitespaces
+qstrip = $(strip $(subst ",,$(1)))
+#"))
 
-# Include some helper macros and variables
-include support/misc/utils.mk
+# Variables for use in Make constructs
+comma := ,
+empty :=
+space := $(empty) $(empty)
 
-# Set variables related to in-tree or out-of-tree build.
-# Here, both $(O) and $(CURDIR) are absolute canonical paths.
-ifeq ($(O),$(CURDIR)/output)
-CONFIG_DIR := $(CURDIR)
+ifneq ("$(origin O)", "command line")
+O := output
+CONFIG_DIR := $(TOPDIR)
 NEED_WRAPPER =
 else
+# other packages might also support Linux-style out of tree builds
+# with the O=<dir> syntax (E.G. BusyBox does). As make automatically
+# forwards command line variable definitions those packages get very
+# confused. Fix this by telling make to not do so
+MAKEOVERRIDES =
+# strangely enough O is still passed to submakes with MAKEOVERRIDES
+# (with make 3.81 atleast), the only thing that changes is the output
+# of the origin function (command line -> environment).
+# Unfortunately some packages don't look at origin (E.G. uClibc 0.9.31+)
+# To really make O go away, we have to override it.
+override O := $(O)
 CONFIG_DIR := $(O)
+# we need to pass O= everywhere we call back into the toplevel makefile
+EXTRAMAKEARGS = O=$(O)
 NEED_WRAPPER = y
 endif
 
 # bash prints the name of the directory on 'cd <dir>' if CDPATH is
 # set, so unset it here to not cause problems. Notice that the export
-# line doesn't affect the environment of $(shell ..) calls.
+# line doesn't affect the environment of $(shell ..) calls, so
+# explictly throw away any output from 'cd' here.
 export CDPATH :=
-
-BASE_DIR := $(CANONICAL_O)
+BASE_DIR := $(shell mkdir -p $(O) && cd $(O) >/dev/null && pwd)
 $(if $(BASE_DIR),, $(error output directory "$(O)" does not exist))
 
 
 # Handling of BR2_EXTERNAL.
 #
 # The value of BR2_EXTERNAL is stored in .br-external in the output directory.
-# The location of the external.mk makefile fragments is computed in that file.
-# On subsequent invocations of make, this file is read in. BR2_EXTERNAL can
-# still be overridden on the command line, therefore the file is re-created
-# every time make is run.
+# On subsequent invocations of make, it is read in. It can still be overridden
+# on the command line, therefore the file is re-created every time make is run.
+#
+# When BR2_EXTERNAL is set to an empty value (e.g. explicitly in command
+# line), the .br-external file is removed and we point to
+# support/dummy-external. This makes sure we can unconditionally include the
+# Config.in and external.mk from the BR2_EXTERNAL directory. In this case,
+# override is necessary so the user can clear BR2_EXTERNAL from the command
+# line, but the dummy path is still used internally.
 
-BR2_EXTERNAL_FILE = $(BASE_DIR)/.br-external.mk
+BR2_EXTERNAL_FILE = $(BASE_DIR)/.br-external
 -include $(BR2_EXTERNAL_FILE)
-$(shell support/scripts/br2-external \
-	-m -o '$(BR2_EXTERNAL_FILE)' $(BR2_EXTERNAL))
-BR2_EXTERNAL_ERROR =
-include $(BR2_EXTERNAL_FILE)
-ifneq ($(BR2_EXTERNAL_ERROR),)
-$(error $(BR2_EXTERNAL_ERROR))
+ifeq ($(BR2_EXTERNAL),)
+  override BR2_EXTERNAL = support/dummy-external
+  $(shell rm -f $(BR2_EXTERNAL_FILE))
+else
+  _BR2_EXTERNAL = $(shell cd $(BR2_EXTERNAL) >/dev/null 2>&1 && pwd)
+  ifeq ($(_BR2_EXTERNAL),)
+    $(error BR2_EXTERNAL='$(BR2_EXTERNAL)' does not exist, relative to $(TOPDIR))
+  endif
+  override BR2_EXTERNAL := $(_BR2_EXTERNAL)
+  $(shell echo BR2_EXTERNAL ?= $(BR2_EXTERNAL) > $(BR2_EXTERNAL_FILE))
 endif
 
 # To make sure that the environment variable overrides the .config option,
@@ -204,9 +183,7 @@ endif
 ifneq ($(BR2_DL_DIR),)
 DL_DIR := $(BR2_DL_DIR)
 endif
-ifneq ($(BR2_CCACHE_DIR),)
-BR_CACHE_DIR := $(BR2_CCACHE_DIR)
-endif
+
 
 # Need that early, before we scan packages
 # Avoids doing the $(or...) everytime
@@ -227,18 +204,11 @@ LICENSE_FILES_DIR_TARGET = $(LEGAL_INFO_DIR)/licenses
 LICENSE_FILES_DIR_HOST = $(LEGAL_INFO_DIR)/host-licenses
 LEGAL_MANIFEST_CSV_TARGET = $(LEGAL_INFO_DIR)/manifest.csv
 LEGAL_MANIFEST_CSV_HOST = $(LEGAL_INFO_DIR)/host-manifest.csv
+LEGAL_LICENSES_TXT_TARGET = $(LEGAL_INFO_DIR)/licenses.txt
+LEGAL_LICENSES_TXT_HOST = $(LEGAL_INFO_DIR)/host-licenses.txt
 LEGAL_WARNINGS = $(LEGAL_INFO_DIR)/.warnings
 LEGAL_REPORT = $(LEGAL_INFO_DIR)/README
 
-################################################################################
-#
-# staging and target directories do NOT list these as
-# dependencies anywhere else
-#
-################################################################################
-$(BUILD_DIR) $(TARGET_DIR) $(HOST_DIR) $(BINARIES_DIR) $(LEGAL_INFO_DIR) $(REDIST_SOURCES_DIR_TARGET) $(REDIST_SOURCES_DIR_HOST):
-	@mkdir -p $@
-
 BR2_CONFIG = $(CONFIG_DIR)/.config
 
 # Pull in the user's configuration file
@@ -246,17 +216,6 @@ ifeq ($(filter $(noconfig_targets),$(MAKECMDGOALS)),)
 -include $(BR2_CONFIG)
 endif
 
-# timezone and locale may affect build output
-ifeq ($(BR2_REPRODUCIBLE),y)
-export TZ = UTC
-export LANG = C
-export LC_ALL = C
-export GZIP = -n
-BR2_VERSION_GIT_EPOCH = $(shell GIT_DIR=$(TOPDIR)/.git $(GIT) log -1 --format=%at)
-export SOURCE_DATE_EPOCH = $(if $(wildcard $(TOPDIR)/.git),$(BR2_VERSION_GIT_EPOCH),$(BR2_VERSION_EPOCH))
-DEPENDENCIES_HOST_PREREQ += host-fakedate
-endif
-
 # To put more focus on warnings, be less verbose as default
 # Use 'make V=1' to see the full commands
 ifeq ("$(origin V)", "command line")
@@ -267,19 +226,26 @@ ifndef KBUILD_VERBOSE
 endif
 
 ifeq ($(KBUILD_VERBOSE),1)
+  quiet =
   Q =
 ifndef VERBOSE
   VERBOSE = 1
 endif
 export VERBOSE
 else
+  quiet = quiet_
   Q = @
 endif
 
+# we want bash as shell
+SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
+	 else if [ -x /bin/bash ]; then echo /bin/bash; \
+	 else echo sh; fi; fi)
+
 # kconfig uses CONFIG_SHELL
 CONFIG_SHELL := $(SHELL)
 
-export SHELL CONFIG_SHELL Q KBUILD_VERBOSE
+export SHELL CONFIG_SHELL quiet Q KBUILD_VERBOSE
 
 ifndef HOSTAR
 HOSTAR := ar
@@ -323,45 +289,10 @@ HOSTLN := $(shell which $(HOSTLN) || type -p $(HOSTLN) || echo ln)
 HOSTNM := $(shell which $(HOSTNM) || type -p $(HOSTNM) || echo nm)
 HOSTOBJCOPY := $(shell which $(HOSTOBJCOPY) || type -p $(HOSTOBJCOPY) || echo objcopy)
 HOSTRANLIB := $(shell which $(HOSTRANLIB) || type -p $(HOSTRANLIB) || echo ranlib)
-SED := $(shell which sed || type -p sed) -i -e
 
 export HOSTAR HOSTAS HOSTCC HOSTCXX HOSTLD
 export HOSTCC_NOCCACHE HOSTCXX_NOCCACHE
 
-# Determine the userland we are running on.
-#
-# Note that, despite its name, we are not interested in the actual
-# architecture name. This is mostly used to determine whether some
-# of the binary tools (e.g. pre-built external toolchains) can run
-# on the current host. So we need to know if the userland we're
-# running on can actually run those toolchains.
-#
-# For example, a 64-bit prebuilt toolchain will not run on a 64-bit
-# kernel if the userland is 32-bit (e.g. in a chroot for example).
-#
-# So, we extract the first part of the tuple the host gcc was
-# configured to generate code for; we assume this is our userland.
-#
-export HOSTARCH := $(shell LC_ALL=C $(HOSTCC_NOCCACHE) -v 2>&1 | \
-	sed -e '/^Target: \([^-]*\).*/!d' \
-	    -e 's//\1/' \
-	    -e 's/i.86/x86/' \
-	    -e 's/sun4u/sparc64/' \
-	    -e 's/arm.*/arm/' \
-	    -e 's/sa110/arm/' \
-	    -e 's/ppc64/powerpc64/' \
-	    -e 's/ppc/powerpc/' \
-	    -e 's/macppc/powerpc/' \
-	    -e 's/sh.*/sh/' )
-
-HOSTCC_VERSION := $(shell $(HOSTCC_NOCCACHE) --version | \
-	sed -n -r 's/^.* ([0-9]*)\.([0-9]*)\.([0-9]*)[ ]*.*/\1 \2/p')
-
-# For gcc >= 5.x, we only need the major version.
-ifneq ($(firstword $(HOSTCC_VERSION)),4)
-HOSTCC_VERSION := $(firstword $(HOSTCC_VERSION))
-endif
-
 # Make sure pkg-config doesn't look outside the buildroot tree
 HOST_PKG_CONFIG_PATH := $(PKG_CONFIG_PATH)
 unexport PKG_CONFIG_PATH
@@ -388,11 +319,8 @@ ifeq ($(BR2_HAVE_DOT_CONFIG),y)
 unexport CROSS_COMPILE
 unexport ARCH
 unexport CC
-unexport LD
-unexport AR
 unexport CXX
 unexport CPP
-unexport RANLIB
 unexport CFLAGS
 unexport CXXFLAGS
 unexport GREP_OPTIONS
@@ -402,12 +330,10 @@ unexport QMAKESPEC
 unexport TERMINFO
 unexport MACHINE
 unexport O
-unexport GCC_COLORS
 
 GNU_HOST_NAME := $(shell support/gnuconfig/config.guess)
 
 PACKAGES :=
-PACKAGES_ALL :=
 
 # silent mode requested?
 QUIET := $(if $(findstring s,$(filter-out --%,$(MAKEFLAGS))),-q)
@@ -422,7 +348,6 @@ KERNEL_ARCH := $(shell echo "$(ARCH)" | sed -e "s/-.*//" \
 	-e s/arm.*/arm/ -e s/sa110/arm/ \
 	-e s/aarch64.*/arm64/ \
 	-e s/bfin/blackfin/ \
-	-e s/or1k/openrisc/ \
 	-e s/parisc64/parisc/ \
 	-e s/powerpc64.*/powerpc/ \
 	-e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
@@ -432,7 +357,6 @@ KERNEL_ARCH := $(shell echo "$(ARCH)" | sed -e "s/-.*//" \
 ZCAT := $(call qstrip,$(BR2_ZCAT))
 BZCAT := $(call qstrip,$(BR2_BZCAT))
 XZCAT := $(call qstrip,$(BR2_XZCAT))
-LZCAT := $(call qstrip,$(BR2_LZCAT))
 TAR_OPTIONS = $(call qstrip,$(BR2_TAR_OPTIONS)) -xf
 
 # packages compiled for the host go here
@@ -447,18 +371,15 @@ TARGET_DIR_WARNING_FILE = $(TARGET_DIR)/THIS_IS_NOT_YOUR_ROOT_FILESYSTEM
 
 ifeq ($(BR2_CCACHE),y)
 CCACHE := $(HOST_DIR)/usr/bin/ccache
-BR_CACHE_DIR ?= $(call qstrip,$(BR2_CCACHE_DIR))
+BR_CACHE_DIR = $(call qstrip,$(BR2_CCACHE_DIR))
 export BR_CACHE_DIR
 HOSTCC := $(CCACHE) $(HOSTCC)
 HOSTCXX := $(CCACHE) $(HOSTCXX)
-else
-export BR_NO_CCACHE
 endif
 
 # Scripts in support/ or post-build scripts may need to reference
 # these locations, so export them so it is easier to use
 export BR2_CONFIG
-export BR2_REPRODUCIBLE
 export TARGET_DIR
 export STAGING_DIR
 export HOST_DIR
@@ -476,7 +397,9 @@ all: world
 
 # Include legacy before the other things, because package .mk files
 # may rely on it.
+ifneq ($(BR2_DEPRECATED),y)
 include Makefile.legacy
+endif
 
 include package/Makefile.in
 include support/dependencies/dependencies.mk
@@ -497,43 +420,7 @@ include boot/common.mk
 include linux/linux.mk
 include fs/common.mk
 
-# If using a br2-external tree, the BR2_EXTERNAL_$(NAME)_PATH variables
-# are also present in the .config file. Since .config is included after
-# we defined them in the Makefile, the values for those variables are
-# quoted. We just include the generated Makefile fragment .br2-external.mk
-# a third time, which will set those variables to the un-quoted values.
-include $(BR2_EXTERNAL_FILE)
-
-# Nothing to include if no BR2_EXTERNAL tree in use
-include $(BR2_EXTERNAL_MKS)
-
-# Now we are sure we have all the packages scanned and defined. We now
-# check for each package in the list of enabled packages, that all its
-# dependencies are indeed enabled.
-#
-# Only trigger the check for default builds. If the user forces building
-# a package, even if not enabled in the configuration, we want to accept
-# it.
-#
-ifeq ($(MAKECMDGOALS),)
-
-define CHECK_ONE_DEPENDENCY
-ifeq ($$($(2)_TYPE),target)
-ifeq ($$($(2)_IS_VIRTUAL),)
-ifneq ($$($$($(2)_KCONFIG_VAR)),y)
-$$(error $$($(2)_NAME) is in the dependency chain of $$($(1)_NAME) that \
-has added it to its _DEPENDENCIES variable without selecting it or \
-depending on it from Config.in)
-endif
-endif
-endif
-endef
-
-$(foreach pkg,$(call UPPERCASE,$(PACKAGES)),\
-	$(foreach dep,$(call UPPERCASE,$($(pkg)_FINAL_ALL_DEPENDENCIES)),\
-		$(eval $(call CHECK_ONE_DEPENDENCY,$(pkg),$(dep))$(sep))))
-
-endif
+include $(BR2_EXTERNAL)/external.mk
 
 dirs: $(BUILD_DIR) $(STAGING_DIR) $(TARGET_DIR) \
 	$(HOST_DIR) $(BINARIES_DIR)
@@ -549,9 +436,31 @@ world: target-post-image
 	legal-info legal-info-prepare legal-info-clean printvars help \
 	list-defconfigs target-finalize target-post-image source-check
 
-# Populating the staging with the base directories is handled by the skeleton package
+################################################################################
+#
+# staging and target directories do NOT list these as
+# dependencies anywhere else
+#
+################################################################################
+$(BUILD_DIR) $(TARGET_DIR) $(HOST_DIR) $(BINARIES_DIR) $(LEGAL_INFO_DIR) $(REDIST_SOURCES_DIR_TARGET) $(REDIST_SOURCES_DIR_HOST):
+	@mkdir -p $@
+
+# We make a symlink lib32->lib or lib64->lib as appropriate
+# MIPS64/n32 requires lib32 even though it's a 64-bit arch.
+ifeq ($(BR2_ARCH_IS_64)$(BR2_MIPS_NABI32),y)
+LIB_SYMLINK = lib64
+else
+LIB_SYMLINK = lib32
+endif
+
 $(STAGING_DIR):
-	@mkdir -p $(STAGING_DIR)
+	@mkdir -p $(STAGING_DIR)/bin
+	@mkdir -p $(STAGING_DIR)/lib
+	@ln -snf lib $(STAGING_DIR)/$(LIB_SYMLINK)
+	@mkdir -p $(STAGING_DIR)/usr/lib
+	@ln -snf lib $(STAGING_DIR)/usr/$(LIB_SYMLINK)
+	@mkdir -p $(STAGING_DIR)/usr/include
+	@mkdir -p $(STAGING_DIR)/usr/bin
 	@ln -snf $(STAGING_DIR) $(BASE_DIR)/staging
 
 RSYNC_VCS_EXCLUSIONS = \
@@ -566,12 +475,11 @@ STRIP_FIND_CMD += -type f \( -perm /111 -o -name '*.so*' \)
 # file exclusions:
 # - libpthread.so: a non-stripped libpthread shared library is needed for
 #   proper debugging of pthread programs using gdb.
-# - ld.so: a non-stripped dynamic linker library is needed for valgrind
 # - kernel modules (*.ko): do not function properly when stripped like normal
 #   applications and libraries. Normally kernel modules are already excluded
 #   by the executable permission check above, so the explicit exclusion is only
 #   done for kernel modules with incorrect permissions.
-STRIP_FIND_CMD += -not \( $(call findfileclauses,libpthread*.so* ld-*.so* *.ko $(call qstrip,$(BR2_STRIP_EXCLUDE_FILES))) \) -print0
+STRIP_FIND_CMD += -not \( $(call findfileclauses,libpthread*.so* *.ko $(call qstrip,$(BR2_STRIP_EXCLUDE_FILES))) \) -print0
 
 ifeq ($(BR2_ECLIPSE_REGISTER),y)
 define TOOLCHAIN_ECLIPSE_REGISTER
@@ -629,10 +537,7 @@ define PURGE_LOCALES
 	do \
 		for langdir in $$dir/*; \
 		do \
-			if [ -e "$${langdir}" ]; \
-			then \
-				grep -qx "$${langdir##*/}" $(LOCALE_WHITELIST) || rm -rf $$langdir; \
-			fi \
+			grep -qx $${langdir##*/} $(LOCALE_WHITELIST) || rm -rf $$langdir; \
 		done; \
 	done
 	if [ -d $(TARGET_DIR)/usr/share/X11/locale ]; \
@@ -658,8 +563,8 @@ target-finalize: $(PACKAGES)
 		$(TARGET_DIR)/usr/lib/pkgconfig $(TARGET_DIR)/usr/share/pkgconfig \
 		$(TARGET_DIR)/usr/lib/cmake $(TARGET_DIR)/usr/share/cmake
 	find $(TARGET_DIR)/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f
-	find $(TARGET_DIR)/lib/ $(TARGET_DIR)/usr/lib/ $(TARGET_DIR)/usr/libexec/ \
-		\( -name '*.a' -o -name '*.la' \) -print0 | xargs -0 rm -f
+	find $(TARGET_DIR)/lib \( -name '*.a' -o -name '*.la' \) -print0 | xargs -0 rm -f
+	find $(TARGET_DIR)/usr/lib \( -name '*.a' -o -name '*.la' \) -print0 | xargs -0 rm -f
 ifneq ($(BR2_PACKAGE_GDB),y)
 	rm -rf $(TARGET_DIR)/usr/share/gdb
 endif
@@ -673,26 +578,33 @@ endif
 	rm -rf $(TARGET_DIR)/usr/info $(TARGET_DIR)/usr/share/info
 	rm -rf $(TARGET_DIR)/usr/doc $(TARGET_DIR)/usr/share/doc
 	rm -rf $(TARGET_DIR)/usr/share/gtk-doc
-	rmdir $(TARGET_DIR)/usr/share 2>/dev/null || true
+	-rmdir $(TARGET_DIR)/usr/share 2>/dev/null
 	$(STRIP_FIND_CMD) | xargs -0 $(STRIPCMD) 2>/dev/null || true
+	if test -d $(TARGET_DIR)/lib/modules; then \
+		find $(TARGET_DIR)/lib/modules -type f -name '*.ko' -print0 | \
+		xargs -0 -r $(KSTRIPCMD); fi
 
 # See http://sourceware.org/gdb/wiki/FAQ, "GDB does not see any threads
 # besides the one in which crash occurred; or SIGTRAP kills my program when
 # I set a breakpoint"
 ifeq ($(BR2_TOOLCHAIN_HAS_THREADS),y)
-	find $(TARGET_DIR)/lib/ -type f -name 'libpthread*.so*' | \
+	find $(TARGET_DIR)/lib -type f -name 'libpthread*.so*' | \
 		xargs -r $(STRIPCMD) $(STRIP_STRIP_DEBUG)
 endif
 
-# Valgrind needs ld.so with enough information, so only strip
-# debugging symbols.
-	find $(TARGET_DIR)/lib/ -type f -name 'ld-*.so*' | \
-		xargs -r $(STRIPCMD) $(STRIP_STRIP_DEBUG)
-	test -f $(TARGET_DIR)/etc/ld.so.conf && \
-		{ echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true
-	test -d $(TARGET_DIR)/etc/ld.so.conf.d && \
-		{ echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true
 	mkdir -p $(TARGET_DIR)/etc
+	# Mandatory configuration file and auxiliary cache directory
+	# for recent versions of ldconfig
+	touch $(TARGET_DIR)/etc/ld.so.conf
+	mkdir -p $(TARGET_DIR)/var/cache/ldconfig
+	if [ -x "$(TARGET_CROSS)ldconfig" ]; \
+	then \
+		$(TARGET_CROSS)ldconfig -r $(TARGET_DIR) \
+					-f $(TARGET_DIR)/etc/ld.so.conf; \
+	else \
+		/sbin/ldconfig -r $(TARGET_DIR) \
+			       -f $(TARGET_DIR)/etc/ld.so.conf; \
+	fi
 	( \
 		echo "NAME=Buildroot"; \
 		echo "VERSION=$(BR2_VERSION_FULL)"; \
@@ -703,7 +615,7 @@ endif
 
 	@$(foreach d, $(call qstrip,$(BR2_ROOTFS_OVERLAY)), \
 		$(call MESSAGE,"Copying overlay $(d)"); \
-		rsync -a --ignore-times --keep-dirlinks $(RSYNC_VCS_EXCLUSIONS) \
+		rsync -a --ignore-times $(RSYNC_VCS_EXCLUSIONS) \
 			--chmod=u=rwX,go=rX --exclude .empty --exclude '*~' \
 			$(d)/ $(TARGET_DIR)$(sep))
 
@@ -735,6 +647,7 @@ legal-info-prepare: $(LEGAL_INFO_DIR)
 	@$(call legal-manifest,PACKAGE,VERSION,LICENSE,LICENSE FILES,SOURCE ARCHIVE,SOURCE SITE,HOST)
 	@$(call legal-manifest,buildroot,$(BR2_VERSION_FULL),GPLv2+,COPYING,not saved,not saved,HOST)
 	@$(call legal-warning,the Buildroot source code has not been saved)
+	@$(call legal-warning,the toolchain has not been saved)
 	@cp $(BR2_CONFIG) $(LEGAL_INFO_DIR)/buildroot.config
 
 legal-info: dirs legal-info-clean legal-info-prepare $(foreach p,$(PACKAGES),$(p)-all-legal-info) \
@@ -744,12 +657,8 @@ legal-info: dirs legal-info-clean legal-info-prepare $(foreach p,$(PACKAGES),$(p
 		cat support/legal-info/README.warnings-header \
 			$(LEGAL_WARNINGS) >>$(LEGAL_REPORT); \
 		cat $(LEGAL_WARNINGS); fi
-	@rm -f $(LEGAL_WARNINGS)
-	@(cd $(LEGAL_INFO_DIR); \
-		find * -type f -exec sha256sum {} + | LC_ALL=C sort -k2 \
-			>.legal-info.sha256; \
-		mv .legal-info.sha256 legal-info.sha256)
 	@echo "Legal info produced in $(LEGAL_INFO_DIR)"
+	@rm -f $(LEGAL_WARNINGS)
 
 show-targets:
 	@echo $(PACKAGES) $(TARGETS_ROOTFS)
@@ -773,21 +682,8 @@ graph-depends: graph-depends-requirements
 	@$(INSTALL) -d $(GRAPHS_DIR)
 	@cd "$(CONFIG_DIR)"; \
 	$(TOPDIR)/support/scripts/graph-depends $(BR2_GRAPH_DEPS_OPTS) \
-		--direct -o $(GRAPHS_DIR)/$(@).dot
-	dot $(BR2_GRAPH_DOT_OPTS) -T$(BR_GRAPH_OUT) \
-		-o $(GRAPHS_DIR)/$(@).$(BR_GRAPH_OUT) \
-		$(GRAPHS_DIR)/$(@).dot
-
-graph-size:
-	$(Q)mkdir -p $(GRAPHS_DIR)
-	$(Q)$(TOPDIR)/support/scripts/size-stats --builddir $(BASE_DIR) \
-		--graph $(GRAPHS_DIR)/graph-size.$(BR_GRAPH_OUT) \
-		--file-size-csv $(GRAPHS_DIR)/file-size-stats.csv \
-		--package-size-csv $(GRAPHS_DIR)/package-size-stats.csv
-
-check-dependencies:
-	@cd "$(CONFIG_DIR)"; \
-	$(TOPDIR)/support/scripts/graph-depends -C
+	|tee $(GRAPHS_DIR)/$(@).dot \
+	|dot $(BR2_GRAPH_DOT_OPTS) -T$(BR_GRAPH_OUT) -o $(GRAPHS_DIR)/$(@).$(BR_GRAPH_OUT)
 
 else # ifeq ($(BR2_HAVE_DOT_CONFIG),y)
 
@@ -801,9 +697,6 @@ endif # ifeq ($(BR2_HAVE_DOT_CONFIG),y)
 HOSTCFLAGS = $(CFLAGS_FOR_BUILD)
 export HOSTCFLAGS
 
-.PHONY: prepare-kconfig
-prepare-kconfig: outputmakefile $(BUILD_DIR)/.br2-external.in
-
 $(BUILD_DIR)/buildroot-config/%onf:
 	mkdir -p $(@D)/lxdialog
 	PKG_CONFIG_PATH="$(HOST_PKG_CONFIG_PATH)" $(MAKE) CC="$(HOSTCC_NOCCACHE)" HOSTCC="$(HOSTCC_NOCCACHE)" \
@@ -819,23 +712,22 @@ COMMON_CONFIG_ENV = \
 	KCONFIG_AUTOHEADER=$(BUILD_DIR)/buildroot-config/autoconf.h \
 	KCONFIG_TRISTATE=$(BUILD_DIR)/buildroot-config/tristate.config \
 	BR2_CONFIG=$(BR2_CONFIG) \
-	HOST_GCC_VERSION="$(HOSTCC_VERSION)" \
-	BUILD_DIR=$(BUILD_DIR) \
+	BR2_EXTERNAL=$(BR2_EXTERNAL) \
 	SKIP_LEGACY=
 
-xconfig: $(BUILD_DIR)/buildroot-config/qconf prepare-kconfig
+xconfig: $(BUILD_DIR)/buildroot-config/qconf outputmakefile
 	@$(COMMON_CONFIG_ENV) $< $(CONFIG_CONFIG_IN)
 
-gconfig: $(BUILD_DIR)/buildroot-config/gconf prepare-kconfig
+gconfig: $(BUILD_DIR)/buildroot-config/gconf outputmakefile
 	@$(COMMON_CONFIG_ENV) srctree=$(TOPDIR) $< $(CONFIG_CONFIG_IN)
 
-menuconfig: $(BUILD_DIR)/buildroot-config/mconf prepare-kconfig
+menuconfig: $(BUILD_DIR)/buildroot-config/mconf outputmakefile
 	@$(COMMON_CONFIG_ENV) $< $(CONFIG_CONFIG_IN)
 
-nconfig: $(BUILD_DIR)/buildroot-config/nconf prepare-kconfig
+nconfig: $(BUILD_DIR)/buildroot-config/nconf outputmakefile
 	@$(COMMON_CONFIG_ENV) $< $(CONFIG_CONFIG_IN)
 
-config: $(BUILD_DIR)/buildroot-config/conf prepare-kconfig
+config: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 	@$(COMMON_CONFIG_ENV) $< $(CONFIG_CONFIG_IN)
 
 # For the config targets that automatically select options, we pass
@@ -843,22 +735,22 @@ config: $(BUILD_DIR)/buildroot-config/conf prepare-kconfig
 # no values are set for the legacy options so a subsequent oldconfig
 # will query them. Therefore, run an additional olddefconfig.
 
-oldconfig: $(BUILD_DIR)/buildroot-config/conf prepare-kconfig
+oldconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 	@$(COMMON_CONFIG_ENV) $< --oldconfig $(CONFIG_CONFIG_IN)
 
-randconfig: $(BUILD_DIR)/buildroot-config/conf prepare-kconfig
+randconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 	@$(COMMON_CONFIG_ENV) SKIP_LEGACY=y $< --randconfig $(CONFIG_CONFIG_IN)
 	@$(COMMON_CONFIG_ENV) $< --olddefconfig $(CONFIG_CONFIG_IN) >/dev/null
 
-allyesconfig: $(BUILD_DIR)/buildroot-config/conf prepare-kconfig
+allyesconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 	@$(COMMON_CONFIG_ENV) SKIP_LEGACY=y $< --allyesconfig $(CONFIG_CONFIG_IN)
 	@$(COMMON_CONFIG_ENV) $< --olddefconfig $(CONFIG_CONFIG_IN) >/dev/null
 
-allnoconfig: $(BUILD_DIR)/buildroot-config/conf prepare-kconfig
+allnoconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 	@$(COMMON_CONFIG_ENV) SKIP_LEGACY=y $< --allnoconfig $(CONFIG_CONFIG_IN)
 	@$(COMMON_CONFIG_ENV) $< --olddefconfig $(CONFIG_CONFIG_IN) >/dev/null
 
-randpackageconfig: $(BUILD_DIR)/buildroot-config/conf prepare-kconfig
+randpackageconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 	@grep -v BR2_PACKAGE_ $(BR2_CONFIG) > $(CONFIG_DIR)/.config.nopkg
 	@$(COMMON_CONFIG_ENV) SKIP_LEGACY=y \
 		KCONFIG_ALLCONFIG=$(CONFIG_DIR)/.config.nopkg \
@@ -866,7 +758,7 @@ randpackageconfig: $(BUILD_DIR)/buildroot-config/conf prepare-kconfig
 	@rm -f $(CONFIG_DIR)/.config.nopkg
 	@$(COMMON_CONFIG_ENV) $< --olddefconfig $(CONFIG_CONFIG_IN) >/dev/null
 
-allyespackageconfig: $(BUILD_DIR)/buildroot-config/conf prepare-kconfig
+allyespackageconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 	@grep -v BR2_PACKAGE_ $(BR2_CONFIG) > $(CONFIG_DIR)/.config.nopkg
 	@$(COMMON_CONFIG_ENV) SKIP_LEGACY=y \
 		KCONFIG_ALLCONFIG=$(CONFIG_DIR)/.config.nopkg \
@@ -874,7 +766,7 @@ allyespackageconfig: $(BUILD_DIR)/buildroot-config/conf prepare-kconfig
 	@rm -f $(CONFIG_DIR)/.config.nopkg
 	@$(COMMON_CONFIG_ENV) $< --olddefconfig $(CONFIG_CONFIG_IN) >/dev/null
 
-allnopackageconfig: $(BUILD_DIR)/buildroot-config/conf prepare-kconfig
+allnopackageconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 	@grep -v BR2_PACKAGE_ $(BR2_CONFIG) > $(CONFIG_DIR)/.config.nopkg
 	@$(COMMON_CONFIG_ENV) SKIP_LEGACY=y \
 		KCONFIG_ALLCONFIG=$(CONFIG_DIR)/.config.nopkg \
@@ -882,24 +774,25 @@ allnopackageconfig: $(BUILD_DIR)/buildroot-config/conf prepare-kconfig
 	@rm -f $(CONFIG_DIR)/.config.nopkg
 	@$(COMMON_CONFIG_ENV) $< --olddefconfig $(CONFIG_CONFIG_IN) >/dev/null
 
-silentoldconfig: $(BUILD_DIR)/buildroot-config/conf prepare-kconfig
+silentoldconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 	$(COMMON_CONFIG_ENV) $< --silentoldconfig $(CONFIG_CONFIG_IN)
 
-olddefconfig: $(BUILD_DIR)/buildroot-config/conf prepare-kconfig
+olddefconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 	$(COMMON_CONFIG_ENV) $< --olddefconfig $(CONFIG_CONFIG_IN)
 
-defconfig: $(BUILD_DIR)/buildroot-config/conf prepare-kconfig
+defconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 	@$(COMMON_CONFIG_ENV) $< --defconfig$(if $(DEFCONFIG),=$(DEFCONFIG)) $(CONFIG_CONFIG_IN)
 
-define percent_defconfig
 # Override the BR2_DEFCONFIG from COMMON_CONFIG_ENV with the new defconfig
-%_defconfig: $(BUILD_DIR)/buildroot-config/conf $(1)/configs/%_defconfig prepare-kconfig
-	@$$(COMMON_CONFIG_ENV) BR2_DEFCONFIG=$(1)/configs/$$@ \
-		$$< --defconfig=$(1)/configs/$$@ $$(CONFIG_CONFIG_IN)
-endef
-$(eval $(foreach d,$(call reverse,$(TOPDIR) $(BR2_EXTERNAL_DIRS)),$(call percent_defconfig,$(d))$(sep)))
+%_defconfig: $(BUILD_DIR)/buildroot-config/conf $(TOPDIR)/configs/%_defconfig outputmakefile
+	@$(COMMON_CONFIG_ENV) BR2_DEFCONFIG=$(TOPDIR)/configs/$@ \
+		$< --defconfig=$(TOPDIR)/configs/$@ $(CONFIG_CONFIG_IN)
 
-savedefconfig: $(BUILD_DIR)/buildroot-config/conf prepare-kconfig
+%_defconfig: $(BUILD_DIR)/buildroot-config/conf $(BR2_EXTERNAL)/configs/%_defconfig outputmakefile
+	@$(COMMON_CONFIG_ENV) BR2_DEFCONFIG=$(BR2_EXTERNAL)/configs/$@ \
+		$< --defconfig=$(BR2_EXTERNAL)/configs/$@ $(CONFIG_CONFIG_IN)
+
+savedefconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 	@$(COMMON_CONFIG_ENV) $< \
 		--savedefconfig=$(if $(DEFCONFIG),$(DEFCONFIG),$(CONFIG_DIR)/defconfig) \
 		$(CONFIG_CONFIG_IN)
@@ -921,20 +814,10 @@ ifeq ($(NEED_WRAPPER),y)
 	$(Q)$(TOPDIR)/support/scripts/mkmakefile $(TOPDIR) $(O)
 endif
 
-# Even though the target is a real file, we mark it as PHONY as we
-# want it to be re-generated each time make is invoked, in case the
-# value of BR2_EXTERNAL is changed.
-.PHONY: $(BUILD_DIR)/.br2-external.in
-$(BUILD_DIR)/.br2-external.in: $(BUILD_DIR)
-	$(Q)support/scripts/br2-external -k -o "$(@)" $(BR2_EXTERNAL)
-
-# printvars prints all the variables currently defined in our
-# Makefiles. Alternatively, if a non-empty VARS variable is passed,
-# only the variables matching the make pattern passed in VARS are
-# displayed.
+# printvars prints all the variables currently defined in our Makefiles
 printvars:
 	@$(foreach V, \
-		$(sort $(if $(VARS),$(filter $(VARS),$(.VARIABLES)),$(.VARIABLES))), \
+		$(sort $(.VARIABLES)), \
 		$(if $(filter-out environment% default automatic, \
 				$(origin $V)), \
 		$(info $V=$($V) ($(value $V)))))
@@ -945,11 +828,14 @@ clean:
 		$(LEGAL_INFO_DIR) $(GRAPHS_DIR)
 
 distclean: clean
-ifeq ($(O),$(CURDIR)/output)
+ifeq ($(DL_DIR),$(TOPDIR)/dl)
+	rm -rf $(DL_DIR)
+endif
+ifeq ($(O),output)
 	rm -rf $(O)
 endif
-	rm -rf $(TOPDIR)/dl $(BR2_CONFIG) $(CONFIG_DIR)/.config.old $(CONFIG_DIR)/..config.tmp \
-		$(CONFIG_DIR)/.auto.deps $(BR2_EXTERNAL_FILE)
+	rm -rf $(BR2_CONFIG) $(CONFIG_DIR)/.config.old $(CONFIG_DIR)/..config.tmp \
+		$(CONFIG_DIR)/.auto.deps
 
 help:
 	@echo 'Cleaning:'
@@ -986,17 +872,27 @@ help:
 	@echo '  <pkg>-depends          - Build <pkg>'\''s dependencies'
 	@echo '  <pkg>-configure        - Build <pkg> up to the configure step'
 	@echo '  <pkg>-build            - Build <pkg> up to the build step'
-	@echo '  <pkg>-show-depends     - List packages on which <pkg> depends'
-	@echo '  <pkg>-show-rdepends    - List packages which have <pkg> as a dependency'
 	@echo '  <pkg>-graph-depends    - Generate a graph of <pkg>'\''s dependencies'
-	@echo '  <pkg>-graph-rdepends   - Generate a graph of <pkg>'\''s reverse dependencies'
 	@echo '  <pkg>-dirclean         - Remove <pkg> build directory'
 	@echo '  <pkg>-reconfigure      - Restart the build from the configure step'
 	@echo '  <pkg>-rebuild          - Restart the build from the build step'
-	$(foreach p,$(HELP_PACKAGES), \
-		@echo $(sep) \
-		@echo '$($(p)_NAME):' $(sep) \
-		$($(p)_HELP_CMDS)$(sep))
+	@echo '  <pkg>-legal-info       - Generate license information for <pkg>'
+ifeq ($(BR2_PACKAGE_BUSYBOX),y)
+	@echo '  busybox-menuconfig     - Run BusyBox menuconfig'
+endif
+ifeq ($(BR2_LINUX_KERNEL),y)
+	@echo '  linux-menuconfig       - Run Linux kernel menuconfig'
+	@echo '  linux-savedefconfig    - Run Linux kernel savedefconfig'
+	@echo '  linux-update-defconfig - Save the Linux configuration to the path specified'
+	@echo '                             by BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE'
+endif
+ifeq ($(BR2_TOOLCHAIN_BUILDROOT),y)
+	@echo '  uclibc-menuconfig      - Run uClibc menuconfig'
+endif
+ifeq ($(BR2_TARGET_BAREBOX),y)
+	@echo '  barebox-menuconfig     - Run barebox menuconfig'
+	@echo '  barebox-savedefconfig  - Run barebox savedefconfig'
+endif
 	@echo
 	@echo 'Documentation:'
 	@echo '  manual                 - build manual in all formats'
@@ -1007,7 +903,6 @@ help:
 	@echo '  manual-epub            - build manual in ePub'
 	@echo '  graph-build            - generate graphs of the build times'
 	@echo '  graph-depends          - generate graph of the dependency tree'
-	@echo '  graph-size             - generate stats of the filesystem size'
 	@echo '  list-defconfigs        - list all defconfigs (pre-configured minimal systems)'
 	@echo
 	@echo 'Miscellaneous:'
@@ -1023,34 +918,17 @@ help:
 	@echo 'it on-line at http://buildroot.org/docs.html'
 	@echo
 
-# List the defconfig files
-# $(1): base directory
-# $(2): br2-external name, empty for bundled
-define list-defconfigs
-	@first=true; \
-	for defconfig in $(1)/configs/*_defconfig; do \
-		[ -f "$${defconfig}" ] || continue; \
-		if $${first}; then \
-			if [ "$(2)" ]; then \
-				printf 'External configs in "$(call qstrip,$(2))":\n'; \
-			else \
-				printf "Built-in configs:\n"; \
-			fi; \
-			first=false; \
-		fi; \
-		defconfig="$${defconfig##*/}"; \
-		printf "  %-35s - Build for %s\n" "$${defconfig}" "$${defconfig%_defconfig}"; \
-	done; \
-	$${first} || printf "\n"
-endef
-
-# We iterate over BR2_EXTERNAL_NAMES rather than BR2_EXTERNAL_DIRS,
-# because we want to display the name of the br2-external tree.
 list-defconfigs:
-	$(call list-defconfigs,$(TOPDIR))
-	$(foreach name,$(BR2_EXTERNAL_NAMES),\
-		$(call list-defconfigs,$(BR2_EXTERNAL_$(name)_PATH),\
-			$(BR2_EXTERNAL_$(name)_DESC))$(sep))
+	@echo 'Built-in configs:'
+	@$(foreach b, $(sort $(notdir $(wildcard $(TOPDIR)/configs/*_defconfig))), \
+	  printf "  %-35s - Build for %s\\n" $(b) $(b:_defconfig=);)
+ifneq ($(wildcard $(BR2_EXTERNAL)/configs/*_defconfig),)
+	@echo
+	@echo 'User-provided configs:'
+	@$(foreach b, $(sort $(notdir $(wildcard $(BR2_EXTERNAL)/configs/*_defconfig))), \
+	  printf "  %-35s - Build for %s\\n" $(b) $(b:_defconfig=);)
+endif
+	@echo
 
 release: OUT = buildroot-$(BR2_VERSION)
 
@@ -1069,8 +947,8 @@ print-version:
 	@echo $(BR2_VERSION_FULL)
 
 include docs/manual/manual.mk
--include $(foreach dir,$(BR2_EXTERNAL_DIRS),$(dir)/docs/*/*.mk)
+-include $(BR2_EXTERNAL)/docs/*/*.mk
 
 .PHONY: $(noconfig_targets)
 
-endif #umask / $(CURDIR) / $(O)
+endif #umask

Makefile.legacy

@@ -4,6 +4,9 @@
 # This file contains placeholders to detect backward-compatibility problems.
 # When a buildroot "API" feature is being deprecated, a rule should be added
 # here that issues an error when the old feature is used.
+#
+# This file is not included if BR2_DEPRECATED is selected, so it is possible
+# to bypass the errors (although that's usually a bad idea).
 
 ifeq ($(BR2_LEGACY),y)
 $(error "You have legacy configuration in your .config! Please check your configuration.")

README

@@ -21,6 +21,3 @@ Buildroot comes with a basic configuration for a number of boards. Run
 Please feed suggestions, bug reports, insults, and bribes back to the
 buildroot mailing list: buildroot@buildroot.org
 You can also find us on #buildroot on Freenode IRC.
-
-If you would like to contribute patches, please read
-https://buildroot.org/manual.html#submitting-patches

arch/Config.in

@@ -94,7 +94,8 @@ config BR2_i386
 
 config BR2_m68k
 	bool "m68k"
-	# MMU support is set by the subarchitecture file, arch/Config.in.m68k
+	select BR2_ARCH_HAS_MMU_MANDATORY
+	depends on BROKEN # ice in uclibc / inet_ntoa_r
 	help
 	  Motorola 68000 family microprocessor
 	  http://en.wikipedia.org/wiki/M68k
@@ -159,13 +160,6 @@ config BR2_nios2
 	  http://www.altera.com/
 	  http://en.wikipedia.org/wiki/Nios_II
 
-config BR2_or1k
-	bool "OpenRISC"
-	select BR2_ARCH_HAS_MMU_MANDATORY
-	help
-	  OpenRISC is a free and open processor for embedded system.
-	  http://openrisc.io
-
 config BR2_powerpc
 	bool "PowerPC"
 	select BR2_ARCH_HAS_MMU_MANDATORY
@@ -204,18 +198,18 @@ config BR2_sh
 	  http://www.hitachi.com/
 	  http://en.wikipedia.org/wiki/SuperH
 
-config BR2_sparc
-	bool "SPARC"
+config BR2_sh64
+	bool "SuperH64"
+	depends on BR2_DEPRECATED_SINCE_2015_05
 	select BR2_ARCH_HAS_MMU_MANDATORY
 	help
-	  SPARC (from Scalable Processor Architecture) is a RISC instruction
-	  set architecture (ISA) developed by Sun Microsystems.
-	  http://www.oracle.com/sun
-	  http://en.wikipedia.org/wiki/Sparc
+	  SuperH64 (or SH) is a 64-bit reduced instruction set computer (RISC)
+	  instruction set architecture (ISA) developed by Hitachi.
+	  http://www.hitachi.com/
+	  http://en.wikipedia.org/wiki/SuperH
 
-config BR2_sparc64
-	bool "SPARC64"
-	select BR2_ARCH_IS_64
+config BR2_sparc
+	bool "SPARC"
 	select BR2_ARCH_HAS_MMU_MANDATORY
 	help
 	  SPARC (from Scalable Processor Architecture) is a RISC instruction
@@ -280,6 +274,10 @@ config BR2_GCC_TARGET_FLOAT_ABI
 config BR2_GCC_TARGET_MODE
 	string
 
+# If the architecture has atomic operations, select this:
+config BR2_ARCH_HAS_ATOMICS
+	bool
+
 # Must be selected by binary formats that support shared libraries.
 config BR2_BINFMT_SUPPORTS_SHARED
 	bool
@@ -333,19 +331,12 @@ config BR2_BINFMT_FLAT_ONE
 
 config BR2_BINFMT_FLAT_SEP_DATA
 	bool "Separate data and code region"
-	# this FLAT binary type technically exists on m68k, but fails
-	# to build numerous packages: due to architecture limitation,
-	# big functions cannot be built in this mode. They cause build
-	# failures such as "Tried to convert PC relative branch to
-	# absolute jump" or "error: value -yyyyy out of range".
-	depends on BR2_bfin
 	help
 	  Allow for the data and text segments to be separated and placed in
 	  different regions of memory.
 
 config BR2_BINFMT_FLAT_SHARED
 	bool "Shared binary"
-	depends on BR2_m68k || BR2_bfin
 	# Even though this really generates shared binaries, there is no libdl
 	# and dlopen() cannot be used. So packages that require shared
 	# libraries cannot be built. Therefore, we don't select
@@ -361,10 +352,14 @@ if BR2_arcle || BR2_arceb
 source "arch/Config.in.arc"
 endif
 
-if BR2_arm || BR2_armeb || BR2_aarch64 || BR2_aarch64_be
+if BR2_arm || BR2_armeb
 source "arch/Config.in.arm"
 endif
 
+if BR2_aarch64 || BR2_aarch64_be
+source "arch/Config.in.aarch64"
+endif
+
 if BR2_bfin
 source "arch/Config.in.bfin"
 endif
@@ -385,19 +380,15 @@ if BR2_nios2
 source "arch/Config.in.nios2"
 endif
 
-if BR2_or1k
-source "arch/Config.in.or1k"
-endif
-
 if BR2_powerpc || BR2_powerpc64 || BR2_powerpc64le
 source "arch/Config.in.powerpc"
 endif
 
-if BR2_sh
+if BR2_sh || BR2_sh64
 source "arch/Config.in.sh"
 endif
 
-if BR2_sparc || BR2_sparc64
+if BR2_sparc
 source "arch/Config.in.sparc"
 endif
 

arch/Config.in.aarch64

@@ -0,0 +1,10 @@
+config BR2_ARCH
+	default "aarch64"	if BR2_aarch64
+	default "aarch64_be"	if BR2_aarch64_be
+
+config BR2_ENDIAN
+	default "LITTLE" if BR2_aarch64
+	default "BIG"	 if BR2_aarch64_be
+
+config BR2_ARCH_HAS_ATOMICS
+	default y

arch/Config.in.arc

@@ -21,6 +21,9 @@ config BR2_ARC_ATOMIC_EXT
 	bool "Atomic extension (LLOCK/SCOND instructions)"
 	default y if BR2_arc770d || BR2_archs38
 
+config BR2_ARCH_HAS_ATOMICS
+	default y if BR2_ARC_ATOMIC_EXT
+
 config BR2_ARCH
 	default "arc"	if BR2_arcle
 	default "arceb"	if BR2_arceb

arch/Config.in.arm

@@ -31,10 +31,6 @@ config BR2_ARM_CPU_HAS_VFPV4
 	bool
 	select BR2_ARM_CPU_HAS_VFPV3
 
-config BR2_ARM_CPU_HAS_FP_ARMV8
-	bool
-	select BR2_ARM_CPU_HAS_VFPV4
-
 config BR2_ARM_CPU_HAS_ARM
 	bool
 
@@ -56,14 +52,9 @@ config BR2_ARM_CPU_ARMV6
 config BR2_ARM_CPU_ARMV7A
 	bool
 
-config BR2_ARM_CPU_ARMV7M
-	bool
-
-config BR2_ARM_CPU_ARMV8
-	bool
-
 choice
 	prompt "Target Architecture Variant"
+	depends on BR2_arm || BR2_armeb
 	default BR2_arm926t
 	help
 	  Specific CPU variant to use
@@ -74,14 +65,12 @@ config BR2_arm920t
 	select BR2_ARM_CPU_HAS_THUMB
 	select BR2_ARM_CPU_ARMV4
 	select BR2_ARCH_HAS_MMU_OPTIONAL
-	depends on !BR2_ARCH_IS_64
 config BR2_arm922t
 	bool "arm922t"
 	select BR2_ARM_CPU_HAS_ARM
 	select BR2_ARM_CPU_HAS_THUMB
 	select BR2_ARM_CPU_ARMV4
 	select BR2_ARCH_HAS_MMU_OPTIONAL
-	depends on !BR2_ARCH_IS_64
 config BR2_arm926t
 	bool "arm926t"
 	select BR2_ARM_CPU_HAS_ARM
@@ -89,14 +78,12 @@ config BR2_arm926t
 	select BR2_ARM_CPU_HAS_THUMB
 	select BR2_ARM_CPU_ARMV5
 	select BR2_ARCH_HAS_MMU_OPTIONAL
-	depends on !BR2_ARCH_IS_64
 config BR2_arm1136j_s
 	bool "arm1136j-s"
 	select BR2_ARM_CPU_HAS_ARM
 	select BR2_ARM_CPU_HAS_THUMB
 	select BR2_ARM_CPU_ARMV6
 	select BR2_ARCH_HAS_MMU_OPTIONAL
-	depends on !BR2_ARCH_IS_64
 config BR2_arm1136jf_s
 	bool "arm1136jf-s"
 	select BR2_ARM_CPU_HAS_ARM
@@ -104,14 +91,12 @@ config BR2_arm1136jf_s
 	select BR2_ARM_CPU_HAS_THUMB
 	select BR2_ARM_CPU_ARMV6
 	select BR2_ARCH_HAS_MMU_OPTIONAL
-	depends on !BR2_ARCH_IS_64
 config BR2_arm1176jz_s
 	bool "arm1176jz-s"
 	select BR2_ARM_CPU_HAS_ARM
 	select BR2_ARM_CPU_HAS_THUMB
 	select BR2_ARM_CPU_ARMV6
 	select BR2_ARCH_HAS_MMU_OPTIONAL
-	depends on !BR2_ARCH_IS_64
 config BR2_arm1176jzf_s
 	bool "arm1176jzf-s"
 	select BR2_ARM_CPU_HAS_ARM
@@ -119,15 +104,6 @@ config BR2_arm1176jzf_s
 	select BR2_ARM_CPU_HAS_THUMB
 	select BR2_ARM_CPU_ARMV6
 	select BR2_ARCH_HAS_MMU_OPTIONAL
-	depends on !BR2_ARCH_IS_64
-config BR2_arm11mpcore
-	bool "mpcore"
-	select BR2_ARM_CPU_HAS_ARM
-	select BR2_ARM_CPU_MAYBE_HAS_VFPV2
-	select BR2_ARM_CPU_HAS_THUMB
-	select BR2_ARM_CPU_ARMV6
-	select BR2_ARCH_HAS_MMU_OPTIONAL
-	depends on !BR2_ARCH_IS_64
 config BR2_cortex_a5
 	bool "cortex-A5"
 	select BR2_ARM_CPU_HAS_ARM
@@ -136,7 +112,6 @@ config BR2_cortex_a5
 	select BR2_ARM_CPU_HAS_THUMB2
 	select BR2_ARM_CPU_ARMV7A
 	select BR2_ARCH_HAS_MMU_OPTIONAL
-	depends on !BR2_ARCH_IS_64
 config BR2_cortex_a7
 	bool "cortex-A7"
 	select BR2_ARM_CPU_HAS_ARM
@@ -145,7 +120,6 @@ config BR2_cortex_a7
 	select BR2_ARM_CPU_HAS_THUMB2
 	select BR2_ARM_CPU_ARMV7A
 	select BR2_ARCH_HAS_MMU_OPTIONAL
-	depends on !BR2_ARCH_IS_64
 config BR2_cortex_a8
 	bool "cortex-A8"
 	select BR2_ARM_CPU_HAS_ARM
@@ -154,7 +128,6 @@ config BR2_cortex_a8
 	select BR2_ARM_CPU_HAS_THUMB2
 	select BR2_ARM_CPU_ARMV7A
 	select BR2_ARCH_HAS_MMU_OPTIONAL
-	depends on !BR2_ARCH_IS_64
 config BR2_cortex_a9
 	bool "cortex-A9"
 	select BR2_ARM_CPU_HAS_ARM
@@ -163,7 +136,6 @@ config BR2_cortex_a9
 	select BR2_ARM_CPU_HAS_THUMB2
 	select BR2_ARM_CPU_ARMV7A
 	select BR2_ARCH_HAS_MMU_OPTIONAL
-	depends on !BR2_ARCH_IS_64
 config BR2_cortex_a12
 	bool "cortex-A12"
 	select BR2_ARM_CPU_HAS_ARM
@@ -172,7 +144,6 @@ config BR2_cortex_a12
 	select BR2_ARM_CPU_HAS_THUMB2
 	select BR2_ARM_CPU_ARMV7A
 	select BR2_ARCH_HAS_MMU_OPTIONAL
-	depends on !BR2_ARCH_IS_64
 config BR2_cortex_a15
 	bool "cortex-A15"
 	select BR2_ARM_CPU_HAS_ARM
@@ -181,108 +152,42 @@ config BR2_cortex_a15
 	select BR2_ARM_CPU_HAS_THUMB2
 	select BR2_ARM_CPU_ARMV7A
 	select BR2_ARCH_HAS_MMU_OPTIONAL
-	depends on !BR2_ARCH_IS_64
-config BR2_cortex_a17
-	bool "cortex-A17"
-	select BR2_ARM_CPU_HAS_ARM
-	select BR2_ARM_CPU_HAS_NEON
-	select BR2_ARM_CPU_HAS_VFPV4
-	select BR2_ARM_CPU_HAS_THUMB2
-	select BR2_ARM_CPU_ARMV7A
-	select BR2_ARCH_HAS_MMU_OPTIONAL
-	depends on !BR2_ARCH_IS_64
-config BR2_cortex_a53
-	bool "cortex-A53"
-	select BR2_ARM_CPU_HAS_ARM if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_NEON if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_THUMB2 if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_FP_ARMV8
-	select BR2_ARM_CPU_ARMV8
-	select BR2_ARCH_HAS_MMU_OPTIONAL
-config BR2_cortex_a57
-	bool "cortex-A57"
-	select BR2_ARM_CPU_HAS_ARM if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_NEON if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_THUMB2 if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_FP_ARMV8
-	select BR2_ARM_CPU_ARMV8
-	select BR2_ARCH_HAS_MMU_OPTIONAL
-config BR2_cortex_a72
-	bool "cortex-A72"
-	select BR2_ARM_CPU_HAS_ARM if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_NEON if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_THUMB2 if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_FP_ARMV8
-	select BR2_ARM_CPU_ARMV8
-	select BR2_ARCH_HAS_MMU_OPTIONAL
 config BR2_cortex_m3
 	bool "cortex-M3"
+	select BR2_ARM_CPU_HAS_THUMB
 	select BR2_ARM_CPU_HAS_THUMB2
-	select BR2_ARM_CPU_ARMV7M
-	depends on !BR2_ARCH_IS_64
-config BR2_cortex_m4
-	bool "cortex-M4"
-	select BR2_ARM_CPU_HAS_THUMB2
-	select BR2_ARM_CPU_ARMV7M
-	depends on !BR2_ARCH_IS_64
 config BR2_fa526
 	bool "fa526/626"
 	select BR2_ARM_CPU_HAS_ARM
 	select BR2_ARM_CPU_ARMV4
 	select BR2_ARCH_HAS_MMU_OPTIONAL
-	depends on !BR2_ARCH_IS_64
 config BR2_pj4
 	bool "pj4"
 	select BR2_ARM_CPU_HAS_ARM
 	select BR2_ARM_CPU_HAS_VFPV3
 	select BR2_ARM_CPU_ARMV7A
 	select BR2_ARCH_HAS_MMU_OPTIONAL
-	depends on !BR2_ARCH_IS_64
 config BR2_strongarm
 	bool "strongarm sa110/sa1100"
 	select BR2_ARM_CPU_HAS_ARM
 	select BR2_ARM_CPU_ARMV4
 	select BR2_ARCH_HAS_MMU_OPTIONAL
-	depends on !BR2_ARCH_IS_64
 config BR2_xscale
 	bool "xscale"
 	select BR2_ARM_CPU_HAS_ARM
 	select BR2_ARM_CPU_HAS_THUMB
 	select BR2_ARM_CPU_ARMV5
 	select BR2_ARCH_HAS_MMU_OPTIONAL
-	depends on !BR2_ARCH_IS_64
 config BR2_iwmmxt
 	bool "iwmmxt"
 	select BR2_ARM_CPU_HAS_ARM
 	select BR2_ARM_CPU_ARMV5
 	select BR2_ARCH_HAS_MMU_OPTIONAL
-	depends on !BR2_ARCH_IS_64
 endchoice
 
-config BR2_ARM_ENABLE_NEON
-	bool "Enable NEON SIMD extension support"
-	depends on BR2_ARM_CPU_MAYBE_HAS_NEON
-	select BR2_ARM_CPU_HAS_NEON
-	help
-	  For some CPU cores, the NEON SIMD extension is optional.
-	  Select this option if you are certain your particular
-	  implementation has NEON support and you want to use it.
-
-config BR2_ARM_ENABLE_VFP
-	bool "Enable VFP extension support"
-	depends on BR2_ARM_CPU_MAYBE_HAS_VFPV2
-	select BR2_ARM_CPU_HAS_VFPV4 if BR2_ARM_CPU_MAYBE_HAS_VFPV4
-	select BR2_ARM_CPU_HAS_VFPV3 if BR2_ARM_CPU_MAYBE_HAS_VFPV3
-	select BR2_ARM_CPU_HAS_VFPV2 if BR2_ARM_CPU_MAYBE_HAS_VFPV2
-	help
-	  For some CPU cores, the VFP extension is optional. Select
-	  this option if you are certain your particular
-	  implementation has VFP support and you want to use it.
-
 choice
 	prompt "Target ABI"
 	depends on BR2_arm || BR2_armeb
-	default BR2_ARM_EABIHF if BR2_ARM_CPU_HAS_VFPV2
 	default BR2_ARM_EABI
 	help
 	  Application Binary Interface to use. The Application Binary
@@ -316,7 +221,7 @@ config BR2_ARM_EABI
 
 config BR2_ARM_EABIHF
 	bool "EABIhf"
-	depends on BR2_ARM_CPU_HAS_VFPV2
+	depends on BR2_ARM_CPU_MAYBE_HAS_VFPV2 || BR2_ARM_CPU_HAS_VFPV2
 	help
 	  The EABIhf is an extension of EABI which supports the 'hard'
 	  floating point model. This model uses the floating point
@@ -334,9 +239,18 @@ config BR2_ARM_EABIHF
 
 endchoice
 
+config BR2_ARM_ENABLE_NEON
+	bool "Enable NEON SIMD extension support"
+	depends on BR2_ARM_CPU_MAYBE_HAS_NEON
+	select BR2_ARM_CPU_HAS_NEON
+	help
+	  For some CPU cores, the NEON SIMD extension is optional.
+	  Select this option if you are certain your particular
+	  implementation has NEON support and you want to use it.
+
 choice
 	prompt "Floating point strategy"
-	default BR2_ARM_FPU_FP_ARMV8 if BR2_ARM_CPU_HAS_FP_ARMV8
+	depends on BR2_ARM_EABI || BR2_ARM_EABIHF
 	default BR2_ARM_FPU_VFPV4D16 if BR2_ARM_CPU_HAS_VFPV4
 	default BR2_ARM_FPU_VFPV3D16 if BR2_ARM_CPU_HAS_VFPV3
 	default BR2_ARM_FPU_VFPV2 if BR2_ARM_CPU_HAS_VFPV2
@@ -354,7 +268,7 @@ config BR2_ARM_SOFT_FLOAT
 
 config BR2_ARM_FPU_VFPV2
 	bool "VFPv2"
-	depends on BR2_ARM_CPU_HAS_VFPV2
+	depends on BR2_ARM_CPU_HAS_VFPV2 || BR2_ARM_CPU_MAYBE_HAS_VFPV2
 	help
 	  This option allows to use the VFPv2 floating point unit, as
 	  available in some ARMv5 processors (ARM926EJ-S) and some
@@ -367,7 +281,7 @@ config BR2_ARM_FPU_VFPV2
 
 config BR2_ARM_FPU_VFPV3
 	bool "VFPv3"
-	depends on BR2_ARM_CPU_HAS_VFPV3
+	depends on BR2_ARM_CPU_HAS_VFPV3 || BR2_ARM_CPU_MAYBE_HAS_VFPV3
 	help
 	  This option allows to use the VFPv3 floating point unit, as
 	  available in some ARMv7 processors (Cortex-A{8, 9}). This
@@ -383,7 +297,7 @@ config BR2_ARM_FPU_VFPV3
 
 config BR2_ARM_FPU_VFPV3D16
 	bool "VFPv3-D16"
-	depends on BR2_ARM_CPU_HAS_VFPV3
+	depends on BR2_ARM_CPU_HAS_VFPV3 || BR2_ARM_CPU_MAYBE_HAS_VFPV3
 	help
 	  This option allows to use the VFPv3 floating point unit, as
 	  available in some ARMv7 processors (Cortex-A{8, 9}). This
@@ -398,7 +312,7 @@ config BR2_ARM_FPU_VFPV3D16
 
 config BR2_ARM_FPU_VFPV4
 	bool "VFPv4"
-	depends on BR2_ARM_CPU_HAS_VFPV4
+	depends on BR2_ARM_CPU_HAS_VFPV4 || BR2_ARM_CPU_MAYBE_HAS_VFPV4
 	help
 	  This option allows to use the VFPv4 floating point unit, as
 	  available in some ARMv7 processors (Cortex-A{5, 7, 12,
@@ -413,7 +327,7 @@ config BR2_ARM_FPU_VFPV4
 
 config BR2_ARM_FPU_VFPV4D16
 	bool "VFPv4-D16"
-	depends on BR2_ARM_CPU_HAS_VFPV4
+	depends on BR2_ARM_CPU_HAS_VFPV4 || BR2_ARM_CPU_MAYBE_HAS_VFPV4
 	help
 	  This option allows to use the VFPv4 floating point unit, as
 	  available in some ARMv7 processors (Cortex-A{5, 7, 12,
@@ -438,7 +352,7 @@ config BR2_ARM_FPU_NEON
 
 config BR2_ARM_FPU_NEON_VFPV4
 	bool "NEON/VFPv4"
-	depends on BR2_ARM_CPU_HAS_VFPV4
+	depends on BR2_ARM_CPU_HAS_VFPV4 || BR2_ARM_CPU_MAYBE_HAS_VFPV4
 	depends on BR2_ARM_CPU_HAS_NEON
 	help
 	  This option allows to use both the VFPv4 and the NEON SIMD
@@ -447,25 +361,10 @@ config BR2_ARM_FPU_NEON_VFPV4
 	  example on Cortex-A5 and Cortex-A7, support for VFPv4 and
 	  NEON is optional.
 
-config BR2_ARM_FPU_FP_ARMV8
-	bool "FP-ARMv8"
-	depends on BR2_ARM_CPU_HAS_FP_ARMV8
-	help
-	  This option allows to use the ARMv8 floating point unit.
-
-config BR2_ARM_FPU_NEON_FP_ARMV8
-	bool "NEON/FP-ARMv8"
-	depends on BR2_ARM_CPU_HAS_FP_ARMV8
-	depends on BR2_ARM_CPU_HAS_NEON
-	help
-	  This option allows to use both the ARMv8 floating point unit
-	  and the NEON SIMD unit for floating point operations.
-
 endchoice
 
 choice
 	prompt "ARM instruction set"
-	depends on BR2_arm || BR2_armeb
 
 config BR2_ARM_INSTRUCTIONS_ARM
 	bool "ARM"
@@ -477,18 +376,12 @@ config BR2_ARM_INSTRUCTIONS_ARM
 config BR2_ARM_INSTRUCTIONS_THUMB
 	bool "Thumb"
 	depends on BR2_ARM_CPU_HAS_THUMB
-	# Thumb-1 and VFP are not compatible
-	depends on BR2_ARM_SOFT_FLOAT
 	help
 	  This option instructions the compiler to generate Thumb
 	  instructions, which allows to mix 16 bits instructions and
 	  32 bits instructions. This generally provides a much smaller
 	  compiled binary size.
 
-comment "Thumb1 is not compatible with VFP"
-	depends on BR2_ARM_CPU_HAS_THUMB
-	depends on !BR2_ARM_SOFT_FLOAT
-
 config BR2_ARM_INSTRUCTIONS_THUMB2
 	bool "Thumb2"
 	depends on BR2_ARM_CPU_HAS_THUMB2
@@ -501,14 +394,15 @@ config BR2_ARM_INSTRUCTIONS_THUMB2
 endchoice
 
 config BR2_ARCH
-	default "arm"		if BR2_arm
-	default "armeb"		if BR2_armeb
-	default "aarch64"	if BR2_aarch64
-	default "aarch64_be"	if BR2_aarch64_be
+	default "arm"	if BR2_arm
+	default "armeb"	if BR2_armeb
 
 config BR2_ENDIAN
-	default "LITTLE" if (BR2_arm || BR2_aarch64)
-	default "BIG"	 if (BR2_armeb || BR2_aarch64_be)
+	default "LITTLE" if BR2_arm
+	default "BIG"	 if BR2_armeb
+
+config BR2_ARCH_HAS_ATOMICS
+	default y
 
 config BR2_GCC_TARGET_CPU
 	default "arm920t"	if BR2_arm920t
@@ -518,38 +412,23 @@ config BR2_GCC_TARGET_CPU
 	default "arm1136jf-s"	if BR2_arm1136jf_s
 	default "arm1176jz-s"	if BR2_arm1176jz_s
 	default "arm1176jzf-s"	if BR2_arm1176jzf_s
-	default "mpcore"	if BR2_arm11mpcore && BR2_ARM_CPU_HAS_VFPV2
-	default "mpcorenovfp"	if BR2_arm11mpcore
 	default "cortex-a5"	if BR2_cortex_a5
 	default "cortex-a7"	if BR2_cortex_a7
 	default "cortex-a8"	if BR2_cortex_a8
 	default "cortex-a9"	if BR2_cortex_a9
 	default "cortex-a12"	if BR2_cortex_a12
 	default "cortex-a15"	if BR2_cortex_a15
-	default "cortex-a17"	if BR2_cortex_a17
 	default "cortex-m3"	if BR2_cortex_m3
-	default "cortex-m4"	if BR2_cortex_m4
 	default "fa526"		if BR2_fa526
 	default "marvell-pj4"	if BR2_pj4
 	default "strongarm"	if BR2_strongarm
 	default "xscale"	if BR2_xscale
 	default "iwmmxt"	if BR2_iwmmxt
-	default "cortex-a53"		if (BR2_cortex_a53 && !BR2_ARCH_IS_64)
-	default "cortex-a53+fp"		if (BR2_cortex_a53 && BR2_ARCH_IS_64 && BR2_ARM_FPU_FP_ARMV8)
-	default "cortex-a53+fp+simd" 	if (BR2_cortex_a53 && BR2_ARCH_IS_64 && BR2_ARM_FPU_NEON_FP_ARMV8)
-	default "cortex-a57"		if (BR2_cortex_a57 && !BR2_ARCH_IS_64)
-	default "cortex-a57+fp"		if (BR2_cortex_a57 && BR2_ARCH_IS_64 && BR2_ARM_FPU_FP_ARMV8)
-	default "cortex-a57+fp+simd" 	if (BR2_cortex_a57 && BR2_ARCH_IS_64 && BR2_ARM_FPU_NEON_FP_ARMV8)
-	default "cortex-a72"		if (BR2_cortex_a72 && !BR2_ARCH_IS_64)
-	default "cortex-a72+fp"		if (BR2_cortex_a72 && BR2_ARCH_IS_64 && BR2_ARM_FPU_FP_ARMV8)
-	default "cortex-a72+fp+simd" 	if (BR2_cortex_a72 && BR2_ARCH_IS_64 && BR2_ARM_FPU_NEON_FP_ARMV8)
 
 config BR2_GCC_TARGET_ABI
-	default "aapcs-linux"	if BR2_arm || BR2_armeb
-	default "lp64"		if BR2_aarch64 || BR2_aarch64_be
+	default "aapcs-linux"
 
 config BR2_GCC_TARGET_FPU
-	depends on BR2_arm || BR2_armeb
 	default "vfp"		if BR2_ARM_FPU_VFPV2
 	default "vfpv3"		if BR2_ARM_FPU_VFPV3
 	default "vfpv3-d16" 	if BR2_ARM_FPU_VFPV3D16
@@ -557,8 +436,6 @@ config BR2_GCC_TARGET_FPU
 	default "vfpv4-d16" 	if BR2_ARM_FPU_VFPV4D16
 	default "neon" 		if BR2_ARM_FPU_NEON
 	default "neon-vfpv4" 	if BR2_ARM_FPU_NEON_VFPV4
-	default "fp-armv8"	if BR2_ARM_FPU_FP_ARMV8
-	default "neon-fp-armv8"	if BR2_ARM_FPU_NEON_FP_ARMV8
 
 config BR2_GCC_TARGET_FLOAT_ABI
 	default "soft"		if BR2_ARM_SOFT_FLOAT

arch/Config.in.bfin

@@ -1,7 +1,7 @@
 choice
 	prompt "Target CPU"
 	depends on BR2_bfin
-	default BR2_bf532
+	default BR2_bf609
 	help
 	  Specify target CPU
 config BR2_bf606
@@ -68,6 +68,9 @@ config BR2_ARCH
 config BR2_ENDIAN
 	default "LITTLE"
 
+config BR2_ARCH_HAS_ATOMICS
+	default y
+
 config BR2_GCC_TARGET_CPU
 	default bf606		if BR2_bf606
 	default bf607		if BR2_bf607

arch/Config.in.m68k

@@ -4,34 +4,13 @@ config BR2_ARCH
 config BR2_ENDIAN
 	default "BIG"
 
-# symbols used to distinguish between m68k and coldfire
-# for gcc multilib
-config BR2_m68k_m68k
-	bool
+config BR2_ARCH_HAS_ATOMICS
+	default y
 
-config BR2_m68k_cf
-	bool
-
-# coldfire variants will be added later
-choice
-	prompt "Target CPU"
-	depends on BR2_m68k
-	default BR2_m68k_68040
-	help
-	  Specific CPU variant to use
-
-config BR2_m68k_68040
-	bool "68040"
-	select BR2_m68k_m68k
-	select BR2_ARCH_HAS_MMU_MANDATORY
-
-config BR2_m68k_cf5208
-	bool "5208"
-	select BR2_m68k_cf
-	select BR2_SOFT_FLOAT
-
-endchoice
-
-config BR2_GCC_TARGET_CPU
+config BR2_GCC_TARGET_ARCH
+	default "68000"		if BR2_m68k_68000
+	default "68010"		if BR2_m68k_68010
+	default "68020"		if BR2_m68k_68020
+	default "68030"		if BR2_m68k_68030
 	default "68040"		if BR2_m68k_68040
-	default "5208"		if BR2_m68k_cf5208
+	default "68060"		if BR2_m68k_68060

arch/Config.in.microblaze

@@ -9,3 +9,6 @@ config BR2_ENDIAN
 config BR2_microblaze
 	bool
 	default y if BR2_microblazeel || BR2_microblazebe
+
+config BR2_ARCH_HAS_ATOMICS
+	default y

arch/Config.in.mips

@@ -1,21 +1,3 @@
-# mips default CPU ISAs
-config BR2_MIPS_CPU_MIPS32
-	bool
-config BR2_MIPS_CPU_MIPS32R2
-	bool
-config BR2_MIPS_CPU_MIPS32R5
-	bool
-config BR2_MIPS_CPU_MIPS32R6
-	bool
-config BR2_MIPS_CPU_MIPS64
-	bool
-config BR2_MIPS_CPU_MIPS64R2
-	bool
-config BR2_MIPS_CPU_MIPS64R5
-	bool
-config BR2_MIPS_CPU_MIPS64R6
-	bool
-
 choice
 	prompt "Target Architecture Variant"
 	depends on BR2_mips || BR2_mipsel || BR2_mips64 || BR2_mips64el
@@ -24,78 +6,21 @@ choice
 	help
 	  Specific CPU variant to use
 
-	  64bit cabable: 64, 64r2, 64r5, 64r6
-	  non-64bit capable: 32, 32r2, 32r5, 32r6
+	  64bit cabable: 3, 4, 64, 64r2
+	  non-64bit capable: 1, 2, 32, 32r2
 
 config BR2_mips_32
-	bool "Generic MIPS32"
+	bool "mips 32"
 	depends on !BR2_ARCH_IS_64
-	select BR2_MIPS_CPU_MIPS32
 config BR2_mips_32r2
-	bool "Generic MIPS32R2"
+	bool "mips 32r2"
 	depends on !BR2_ARCH_IS_64
-	select BR2_MIPS_CPU_MIPS32R2
-config BR2_mips_32r5
-	bool "Generic MIPS32R5"
-	depends on !BR2_ARCH_IS_64
-	select BR2_MIPS_CPU_MIPS32R5
-config BR2_mips_32r6
-	bool "Generic MIPS32R6"
-	depends on !BR2_ARCH_IS_64
-	select BR2_MIPS_CPU_MIPS32R6
-config BR2_mips_interaptiv
-	bool "interAptiv"
-	depends on !BR2_ARCH_IS_64
-	select BR2_MIPS_CPU_MIPS32R2
-config BR2_mips_m5150
-	bool "M5150"
-	depends on !BR2_ARCH_IS_64
-	select BR2_MIPS_CPU_MIPS32R5
-config BR2_mips_m6250
-	bool "M6250"
-	depends on !BR2_ARCH_IS_64
-	select BR2_MIPS_CPU_MIPS32R6
-config BR2_mips_p5600
-	bool "P5600"
-	depends on !BR2_ARCH_IS_64
-	select BR2_MIPS_CPU_MIPS32R5
-config BR2_mips_xburst
-	bool "XBurst"
-	depends on !BR2_ARCH_IS_64
-	select BR2_MIPS_CPU_MIPS32R2
-	help
-	  The Ingenic XBurst is a MIPS32R2 microprocessor. It has a
-	  bug in the FPU that can generate incorrect results in
-	  certain cases. The problem shows up when you have several
-	  fused madd instructions in sequence with dependant
-	  operands. This requires the -mno-fused-madd compiler option
-	  to be used in order to prevent emitting these instructions.
-
-	  See http://www.ingenic.com/en/?xburst.html
 config BR2_mips_64
-	bool "Generic MIPS64"
+	bool "mips 64"
 	depends on BR2_ARCH_IS_64
-	select BR2_MIPS_CPU_MIPS64
 config BR2_mips_64r2
-	bool "Generic MIPS64R2"
+	bool "mips 64r2"
 	depends on BR2_ARCH_IS_64
-	select BR2_MIPS_CPU_MIPS64R2
-config BR2_mips_64r5
-	bool "Generic MIPS64R5"
-	depends on BR2_ARCH_IS_64
-	select BR2_MIPS_CPU_MIPS64R5
-config BR2_mips_64r6
-	bool "Generic MIPS64R6"
-	depends on BR2_ARCH_IS_64
-	select BR2_MIPS_CPU_MIPS64R6
-config BR2_mips_i6400
-	bool "I6400"
-	depends on BR2_ARCH_IS_64
-	select BR2_MIPS_CPU_MIPS64R6
-config BR2_mips_p6600
-	bool "P6600"
-	depends on BR2_ARCH_IS_64
-	select BR2_MIPS_CPU_MIPS64R6
 endchoice
 
 
@@ -136,22 +61,18 @@ config BR2_ENDIAN
 	default "LITTLE"	if BR2_mipsel || BR2_mips64el
 	default "BIG" 	    	if BR2_mips || BR2_mips64
 
+config BR2_ARCH_HAS_ATOMICS
+	default y
+
 config BR2_GCC_TARGET_ARCH
+	default "mips1"		if BR2_mips_1
+	default "mips2"		if BR2_mips_2
+	default "mips3"		if BR2_mips_3
+	default "mips4"		if BR2_mips_4
 	default "mips32"	if BR2_mips_32
 	default "mips32r2"	if BR2_mips_32r2
-	default "mips32r5"	if BR2_mips_32r5
-	default "mips32r6"	if BR2_mips_32r6
-	default "interaptiv"	if BR2_mips_interaptiv
-	default "m5101"		if BR2_mips_m5150
-	default "m6201"		if BR2_mips_m6250
-	default "p5600"		if BR2_mips_p5600
-	default "mips32r2"	if BR2_mips_xburst
 	default "mips64"	if BR2_mips_64
 	default "mips64r2"	if BR2_mips_64r2
-	default "mips64r5"	if BR2_mips_64r5
-	default "mips64r6"	if BR2_mips_64r6
-	default "i6400"		if BR2_mips_i6400
-	default "p6600"		if BR2_mips_p6600
 
 config BR2_MIPS_OABI32
 	bool

arch/Config.in.nios2

@@ -3,3 +3,6 @@ config BR2_ARCH
 
 config BR2_ENDIAN
 	default "LITTLE"
+
+config BR2_ARCH_HAS_ATOMICS
+	default y

arch/Config.in.or1k

@@ -1,5 +0,0 @@
-config BR2_ARCH
-	default "or1k"
-
-config BR2_ENDIAN
-	default "BIG"

arch/Config.in.powerpc

@@ -164,6 +164,9 @@ config BR2_ENDIAN
 	default "BIG"    if BR2_powerpc || BR2_powerpc64
 	default "LITTLE" if BR2_powerpc64le
 
+config BR2_ARCH_HAS_ATOMICS
+	default y
+
 config BR2_GCC_TARGET_CPU
 	default "401"		if BR2_powerpc_401
 	default "403"		if BR2_powerpc_403
@@ -197,8 +200,6 @@ config BR2_GCC_TARGET_CPU
 	default "e300c2"	if BR2_powerpc_e300c2
 	default "e300c3"	if BR2_powerpc_e300c3
 	default "e500mc"	if BR2_powerpc_e500mc
-	default "e5500"		if BR2_powerpc_e5500
-	default "e6500"		if BR2_powerpc_e6500
 	default "power4"	if BR2_powerpc_power4
 	default "power5"	if BR2_powerpc_power5
 	default "power6"	if BR2_powerpc_power6

arch/Config.in.sh

@@ -23,7 +23,11 @@ config BR2_ARCH
 	default "sh4eb"		if BR2_sh4eb
 	default "sh4a"		if BR2_sh4a
 	default "sh4aeb"	if BR2_sh4aeb
+	default "sh64"		if BR2_sh64
 
 config BR2_ENDIAN
-	default "LITTLE"	if BR2_sh4 || BR2_sh4a
+	default "LITTLE"	if BR2_sh4 || BR2_sh4a || BR2_sh64
 	default "BIG"		if BR2_sh2a || BR2_sh4eb || BR2_sh4aeb
+
+config BR2_ARCH_HAS_ATOMICS
+	default y

arch/Config.in.sparc

@@ -1,25 +1,18 @@
 choice
 	prompt "Target Architecture Variant"
-	depends on BR2_sparc || BR2_sparc64
-	default BR2_sparc_v8 if BR2_sparc
-	default BR2_sparc_v9 if BR2_sparc64
+	depends on BR2_sparc
+	default BR2_sparc_v8
 	help
 	  Specific CPU variant to use
 
 config BR2_sparc_v8
 	bool "v8"
-	depends on BR2_sparc
 config BR2_sparc_leon3
 	bool "leon3"
-	depends on BR2_sparc
-config BR2_sparc_v9
-	bool "v9"
-	depends on BR2_sparc64
 endchoice
 
 config BR2_ARCH
 	default "sparc"	if BR2_sparc
-	default "sparc64" if BR2_sparc64
 
 config BR2_ENDIAN
 	default "BIG"
@@ -27,4 +20,3 @@ config BR2_ENDIAN
 config BR2_GCC_TARGET_CPU
 	default "leon3"		if BR2_sparc_leon3
 	default "v8"		if BR2_sparc_v8
-	default "ultrasparc"	if BR2_sparc_v9

arch/Config.in.x86

@@ -25,23 +25,15 @@ choice
 	help
 	  Specific CPU variant to use
 
+config BR2_x86_i386
+	bool "i386"
+	depends on !BR2_x86_64
 config BR2_x86_i486
 	bool "i486"
 	depends on !BR2_x86_64
 config BR2_x86_i586
 	bool "i586"
 	depends on !BR2_x86_64
-config BR2_x86_x1000
-	bool "x1000"
-	depends on !BR2_x86_64
-	help
-	  The Intel X1000 is a Pentium class microprocessor in the
-	  Quark (sub-Atom) Product Line. The X1000 has a bug on the
-	  lock prefix requiring that prefix must be stripped at build
-	  time.
-
-	  See https://en.wikipedia.org/wiki/Intel_Quark
-
 config BR2_x86_i686
 	bool "i686"
 	depends on !BR2_x86_64
@@ -207,9 +199,9 @@ config BR2_x86_winchip2
 endchoice
 
 config BR2_ARCH
+	default "i386"		if BR2_x86_i386
 	default "i486"		if BR2_x86_i486
 	default "i586"		if BR2_x86_i586
-	default "i586"		if BR2_x86_x1000
 	default "i586"		if BR2_x86_pentium_mmx
 	default "i586"		if BR2_x86_geode
 	default "i586"		if BR2_x86_c3
@@ -226,8 +218,6 @@ config BR2_ARCH
 	default "i686"		if BR2_x86_nocona && BR2_i386
 	default "i686"		if BR2_x86_core2 && BR2_i386
 	default "i686"		if BR2_x86_corei7 && BR2_i386
-	default "i686"		if BR2_x86_corei7_avx && BR2_i386
-	default "i686"		if BR2_x86_corei7_avx2 && BR2_i386
 	default "i686"		if BR2_x86_atom && BR2_i386
 	default "i686"		if BR2_x86_opteron && BR2_i386
 	default "i686"		if BR2_x86_opteron_sse3 && BR2_i386
@@ -243,10 +233,13 @@ config BR2_ARCH
 config BR2_ENDIAN
 	default "LITTLE"
 
+config BR2_ARCH_HAS_ATOMICS
+	default y if !BR2_x86_i386
+
 config BR2_GCC_TARGET_ARCH
+	default "i386"		if BR2_x86_i386
 	default "i486"		if BR2_x86_i486
 	default "i586"		if BR2_x86_i586
-	default "i586"		if BR2_x86_x1000
 	default "pentium-mmx"	if BR2_x86_pentium_mmx
 	default "i686"		if BR2_x86_i686
 	default "pentiumpro"	if BR2_x86_pentiumpro

arch/Config.in.xtensa

@@ -54,3 +54,6 @@ config BR2_ENDIAN
 
 config BR2_ARCH
 	default "xtensa"	if BR2_xtensa
+
+config BR2_ARCH_HAS_ATOMICS
+	default y

board/acmesystems/aria-g25/genimage.cfg

@@ -1,35 +0,0 @@
-# Minimal SD card image for the Acmesystems Aria G25
-
-image boot.vfat {
-	vfat {
-		file zImage {
-			image = "zImage"
-		}
-
-		file at91-ariag25.dtb {
-			image = "at91-ariag25.dtb"
-		}
-
-		file boot.bin {
-			image = "at91sam9x5_aria-sdcardboot-linux-zimage-dt-3.8.6.bin"
-		}
-	}
-	size = 16M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition boot {
-		partition-type = 0xC
-		bootable = "true"
-		image = "boot.vfat"
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-		size = 512M
-	}
-}

board/acmesystems/aria-g25/post-image.sh

@@ -1,14 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname $0)"
-GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
-GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
-
-rm -rf "${GENIMAGE_TMP}"
-
-genimage  \
-	--rootpath "${TARGET_DIR}"     \
-	--tmppath "${GENIMAGE_TMP}"    \
-	--inputpath "${BINARIES_DIR}"  \
-	--outputpath "${BINARIES_DIR}" \
-	--config "${GENIMAGE_CFG}"

board/acmesystems/aria-g25/readme.txt

@@ -1,44 +1,51 @@
-Acme Systems Aria G25
-
 Build instructions
 ==================
 
-To build an image for the Aria G25 choose the configuration
-corresponding to the Aria variant.
+As a regular user configure and then build:
 
-For 128MB RAM variant type:
-
-$ make acmesystems_aria_g25_128mb_defconfig
-
-else for 256MB RAM variant type:
-
-$ make acmesystems_aria_g25_256mb_defconfig
-
-To customize the configuration choosed type:
-
-$ make menuconfig
-
-When you are ready to start building Buildroot type:
+$ make acmesystems_aria_g25_128mb_defconfig (128MB RAM variant)
+  or...
+$ make acmesystems_aria_g25_256mb_defconfig (256MB RAM variant)
 
 $ make
 
-How to write the microSD card
-=============================
+Writing to the MicroSD card
+===========================
 
-Once the build process is finished you will have an image called
-"sdcard.img" in the output/images/ directory.
+Assuming your Aria G25 baseboard has a MicroSD socket, for example with
+the Terra baseboard, you'll need a blank MicroSD (obviously) initialized
+in a particular way to be able to boot from it.
 
-Write the bootable SD card image "sdcard.img" onto an SD card with
-"dd" command:
+Assuming the card is seen as /dev/sdb in your PC/laptop/other device
+you'll need to run the following commands as root or via sudo.
 
-  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
+Make sure all of the card partitions are unmounted before starting.
 
-Assuming your Aria G25 baseboard has a MicroSD socket, for example
-with the Terra baseboard, insert the microSD card into the baseboard
-slot and power it.
+First we'll need to create two partitions:
 
-To get the kernel log messages you can use a DPI cable
-(http://www.acmesystems.it/DPI)
+# sfdisk -uM /dev/sdb <<EOF
+,32,6
+;
+EOF
+
+Then we'll need to create the empty filesystems:
+
+# mkdosfs -n SD_BOOT /dev/sdb1
+# mkfs.ext4 -L SD_ROOT /dev/sdb2
+
+We'll populate the first partition (boot) with the relevant files:
+
+# mount /dev/sdb1 /mnt
+# cp output/images/at91bootstrap.bin /mnt/BOOT.BIN
+# cp output/images/zImage /mnt
+# cp output/images/at91-ariag25.dtb /mnt
+# umount /mnt
+
+And the root filesystem afterwards:
+
+# mount /dev/sdb2 /mnt
+# tar -C /mnt output/images/rootfs.tar
+# umount /mnt
+
+You're done, insert the MicroSD card in the slot and enjoy.
 
-You can find additional informations, tutorials and a very
-comprehensive documentation on http://www.acmesystems.it/aria.

board/acmesystems/arietta-g25/genimage.cfg

@@ -1,35 +0,0 @@
-# Minimal SD card image for the Acmesystems Arietta G25
-
-image boot.vfat {
-	vfat {
-		file zImage {
-			image = "zImage"
-		}
-		
-		file acme-arietta.dtb {
-			image = "at91-ariettag25.dtb"
-		}
-		
-		file boot.bin {
-			image = "at91sam9x5_arietta-sdcardboot-linux-zimage-dt-3.8.6.bin"
-		} 
-	}
-	size = 16M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition boot {
-		partition-type = 0xC
-		bootable = "true"
-		image = "boot.vfat"
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-		size = 512M
-	}
-}

board/acmesystems/arietta-g25/post-image.sh

@@ -1,14 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname $0)"
-GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
-GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
-
-rm -rf "${GENIMAGE_TMP}"
-
-genimage  \
-	--rootpath "${TARGET_DIR}"     \
-	--tmppath "${GENIMAGE_TMP}"    \
-	--inputpath "${BINARIES_DIR}"  \
-	--outputpath "${BINARIES_DIR}" \
-	--config "${GENIMAGE_CFG}"

board/acmesystems/arietta-g25/readme.txt

@@ -1,49 +0,0 @@
-Acme Systems Arietta G25
-
-Intro
-=====
-
-This default configuration will allow you to start experimenting with the
-buildroot environment for the Arietta G25. With the current configuration
-it will bring-up the board, and allow access through the serial console.
-
-You can find additional informations, tutorials and a very comprehensive
-documentation on http://www.acmesystems.it/arietta.
-
-Build instructions
-==================
-
-To build an image for the Arietta G25 choose the configuration
-corresponding to the Arietta variant.
-
-For 128MB RAM variant type:
-
-$ make acmesystems_arietta_g25_128mb_defconfig
-
-else for 256MB RAM variant type:
-
-$ make acmesystems_arietta_g25_256mb_defconfig
-
-To customize the configuration chosen type:
-
-$ make menuconfig
-
-When you are ready to start building Buildroot type:
-
-$ make
-
-How to write the microSD card
-=============================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
-  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
-
-Insert the microSD card into the Arietta slot and power it.
-
-The image just built is fairly basic and the only output
-you will get is on serial console, please consider to use a DPI
-cable (http://www.acmesystems.it/DPI)

board/altera/readme.txt

@@ -1,4 +1,4 @@
-SoCkit, SoC Development Kit
+SoCkit
 
 Intro
 =====
@@ -6,17 +6,14 @@ Intro
 This is the buildroot board support for the Arrow SoCkit Evaluation Board
 and the Altera Cyclone 5 Development Board.
 
-A good source of information for Arrow SoCkit:
+A good source of information is :
 http://www.rocketboards.org/foswiki/Documentation/ArrowSoCKitEvaluationBoard
 
-More information about SoC DK:
-https://www.altera.com/products/boards_and_kits/dev-kits/altera/kit-cyclone-v-soc.html
-
 How it works
 ============
 
-Boot process:
--------------
+Boot process :
+--------------
 
 In summary, the bootloader has multiple stages, an hardcoded boot routine is
 loaded from an on-chip ROM.
@@ -28,15 +25,15 @@ loaded from an on-chip ROM.
     which will load the u-boot image.
   - Then the u-boot image will load the Linux kernel.
 
-A good source of information for the boot process is:
+A good source of information for the boot process is :
 http://xillybus.com/tutorials/u-boot-image-altera-soc
 
-Note for the SPL:
+Note for the SPL :
 The SPL generated by the u-boot from Rocketboards doesn't seems to work,
 therefore we provide a patch for {uboot-PKG}/board/altera/socfpga_cyclone5/*
 based on the files generated with the Altera example design.
 
-For more information about this files please look at:
+For more information about this files please look at :
 http://www.rocketboards.org/foswiki/Documentation/PreloaderUbootCustomization#Common_Source_Code
 
 How to build it
@@ -46,11 +43,11 @@ Configure Buildroot
 -------------------
 
 The altera_sockit_defconfig configuration is a minimal configuration with
-all that is required to bring the SoCkit:
+all that is required to bring the SoCkit :
 
   $ make altera_sockit_defconfig
 
-and for the SoC Development Board:
+and for the SoC Development Board :
 
   $ make altera_sockdk_defconfig
 
@@ -84,7 +81,7 @@ Signing the Preloader
 *** BEWARE ****
 The u-boot-spl.bin must be signed using the Altera's tool "mkpimage".
 This tool comes as a part of the Altera development environnment (SoC EDS).
-A fork of this tool have been done by Maxime Hadjinlian and can be found here:
+A fork of this tool have been done by Maxime Hadjinlian and can be found here :
 https://github.com/maximeh/mkpimage
 
 Remember that without signing the u-boot-spl.bin, the board will not boot !!!
@@ -94,17 +91,17 @@ Remember that without signing the u-boot-spl.bin, the board will not boot !!!
 Prepare your SDcard
 ===================
 
-A good source of information for the partitioning process is:
+A good source of information for the partitioning process is :
 http://www.rocketboards.org/foswiki/view/Projects/SoCKitLinaroLinuxDesktop#Partition_the_SD_Card
 
 Create the SDcard partition table
 ----------------------------------
 
-Determine the device associated to the SD card:
+Determine the device associated to the SD card :
 
   $ cat /proc/partitions
 
-let's assume it is /dev/mmcblk0:
+let's assume it is /dev/mmcblk0 :
 
   $ sudo fdisk /dev/mmcblk0
 
@@ -115,7 +112,7 @@ using these options, pressing enter after each one:
   * n p 2 4096 +4496384K t 83
   * n p 3 2048 +1024K t 3 a2
 
-Using the 'p' option, the SD card's partition must look like this:
+Using the 'p' option, the SD card's partition must look like this :
 
 Device         Boot     Start       End  Blocks  Id System
 /dev/mmcblk0p1        9000000   9041919   20960   b W95 FAT32
@@ -124,32 +121,32 @@ Device         Boot     Start       End  Blocks  Id System
 
 Then write the partition table using 'w' and exit.
 
-Make partition one a DOS partition:
+Make partition one a DOS partition :
 
   $ sudo mkdosfs /dev/mmcblk0p1
 
 Install the binaries to the SDcard
 ----------------------------------
 
-Remember your binaries are located in output/images/, go inside that directory:
+Remember your binaries are located in output/images/, go inside that directory :
 
   $ cd output/images
 
 The partition with type a2 is the partition scan by the first bootloader stage
 in the SoCkit ROM to find the next bootloader stage so we must write the signed
-preloader and the u-boot binaries in that partition:
+preloader and the u-boot binaries in that partition :
 
   $ sudo dd if=u-boot-spl-signed.bin of=/dev/mmcblk0p3 bs=64k seek=0
   $ sudo dd if=u-boot.img of=/dev/mmcblk0p3 bs=64k seek=4
 
-Copy the Linux kernel and its Device tree:
+Copy the Linux kernel and its Device tree :
 
   $ sudo mkdir /mnt/sdcard
   $ sudo mount /dev/mmcblk0p1 /mnt/sdcard
   $ sudo cp socfpga.dtb uImage /mnt/sdcard
   $ sudo umount /mnt/sdcard
 
-Copy the rootfs:
+Copy the rootfs :
 
   $ sudo dd if=rootfs.ext2 of=/dev/mmcblk0p2 bs=64k
   $ sudo sync

board/arcturus/ppc-ucp1020/configs/linux-4.1.x.config

@@ -1,269 +0,0 @@
-CONFIG_PPC_85xx=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_CROSS_COMPILE="powerpc-linux-"
-CONFIG_LOCALVERSION="-ANI-uCP1020-64EE512"
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_DEFAULT_HOSTNAME="uCP1020-64EE512"
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_AUDIT=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_LOG_CPU_MAX_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_XZ is not set
-# CONFIG_RD_LZO is not set
-# CONFIG_RD_LZ4 is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_EMBEDDED=y
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_JUMP_LABEL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAC_PARTITION=y
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_UCP1020_SOM=y
-CONFIG_HIGHMEM=y
-CONFIG_PREEMPT=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_MATH_EMULATION=y
-CONFIG_MATH_EMULATION_HW_UNIMPLEMENTED=y
-CONFIG_SWIOTLB=y
-# CONFIG_COMPACTION is not set
-CONFIG_PCI=y
-CONFIG_PCIEPORTBUS=y
-# CONFIG_PCIEAER is not set
-# CONFIG_PCIEASPM is not set
-CONFIG_PCI_MSI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-CONFIG_BRIDGE_NETFILTER=y
-CONFIG_NF_CONNTRACK=y
-CONFIG_NF_CONNTRACK_FTP=y
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=y
-CONFIG_NETFILTER_XT_TARGET_MARK=y
-CONFIG_NETFILTER_XT_MATCH_COMMENT=y
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=y
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
-CONFIG_NETFILTER_XT_MATCH_HELPER=y
-CONFIG_NETFILTER_XT_MATCH_MARK=y
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
-CONFIG_NETFILTER_XT_MATCH_STATE=y
-CONFIG_NF_CONNTRACK_IPV4=y
-CONFIG_IP_NF_IPTABLES=y
-CONFIG_IP_NF_FILTER=y
-CONFIG_IP_NF_TARGET_REJECT=y
-CONFIG_IP_NF_NAT=y
-CONFIG_IP_NF_TARGET_MASQUERADE=y
-CONFIG_IP_NF_TARGET_NETMAP=y
-CONFIG_IP_NF_TARGET_REDIRECT=y
-CONFIG_IP_NF_MANGLE=y
-CONFIG_BRIDGE=y
-CONFIG_VLAN_8021Q=y
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_HTB=y
-CONFIG_CFG80211=y
-# CONFIG_CFG80211_DEFAULT_PS is not set
-CONFIG_MAC80211=y
-# CONFIG_MAC80211_RC_MINSTREL is not set
-CONFIG_UEVENT_HELPER_PATH="/bin/hotplug"
-CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_FTL=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_SST25L=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_PLATFORM=y
-CONFIG_MTD_NAND_FSL_ELBC=y
-CONFIG_MTD_NAND_FSL_UPM=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_EEPROM_AT25=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_NETDEVICES=y
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_ADAPTEC is not set
-# CONFIG_NET_VENDOR_AGERE is not set
-# CONFIG_NET_VENDOR_ALTEON is not set
-# CONFIG_NET_VENDOR_AMD is not set
-# CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_VENDOR_ATHEROS is not set
-# CONFIG_NET_CADENCE is not set
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_BROCADE is not set
-# CONFIG_NET_VENDOR_CHELSIO is not set
-# CONFIG_NET_VENDOR_CISCO is not set
-# CONFIG_NET_VENDOR_DEC is not set
-# CONFIG_NET_VENDOR_DLINK is not set
-# CONFIG_NET_VENDOR_EMULEX is not set
-# CONFIG_NET_VENDOR_EXAR is not set
-CONFIG_GIANFAR=y
-# CONFIG_NET_VENDOR_HP is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MELLANOX is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_MICROCHIP is not set
-# CONFIG_NET_VENDOR_MYRI is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_NET_VENDOR_NVIDIA is not set
-# CONFIG_NET_VENDOR_OKI is not set
-# CONFIG_NET_PACKET_ENGINE is not set
-# CONFIG_NET_VENDOR_QLOGIC is not set
-# CONFIG_NET_VENDOR_QUALCOMM is not set
-# CONFIG_NET_VENDOR_REALTEK is not set
-# CONFIG_NET_VENDOR_RDC is not set
-# CONFIG_NET_VENDOR_ROCKER is not set
-# CONFIG_NET_VENDOR_SAMSUNG is not set
-# CONFIG_NET_VENDOR_SEEQ is not set
-# CONFIG_NET_VENDOR_SILAN is not set
-# CONFIG_NET_VENDOR_SIS is not set
-# CONFIG_NET_VENDOR_SMSC is not set
-# CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SUN is not set
-# CONFIG_NET_VENDOR_TEHUTI is not set
-# CONFIG_NET_VENDOR_TI is not set
-# CONFIG_NET_VENDOR_VIA is not set
-# CONFIG_NET_VENDOR_WIZNET is not set
-# CONFIG_NET_VENDOR_XILINX is not set
-CONFIG_MICREL_PHY=y
-CONFIG_IWLWIFI=m
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIO_LIBPS2=y
-CONFIG_LEGACY_PTY_COUNT=16
-CONFIG_NOZOMI=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-CONFIG_NVRAM=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MPC=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_FSL_ESPI=y
-CONFIG_SPI_SPIDEV=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_MPC8XXX=y
-CONFIG_SENSORS_LM90=y
-CONFIG_THERMAL=y
-CONFIG_WATCHDOG=y
-CONFIG_BOOKE_WDT=y
-CONFIG_BOOKE_WDT_DEFAULT_TIMEOUT=36
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_MEDIA_CAMERA_SUPPORT=y
-CONFIG_MEDIA_CONTROLLER=y
-CONFIG_VIDEO_V4L2_SUBDEV_API=y
-CONFIG_MEDIA_USB_SUPPORT=y
-CONFIG_USB_VIDEO_CLASS=y
-CONFIG_USB_GSPCA=y
-CONFIG_USB_PWC=y
-CONFIG_USB_ZR364XX=y
-CONFIG_USB_STKWEBCAM=y
-CONFIG_VIDEO_EM28XX=y
-CONFIG_VIDEO_EM28XX_V4L2=y
-# CONFIG_HID is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DYNAMIC_MINORS=y
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_FSL=y
-CONFIG_USB_ACM=y
-CONFIG_USB_WDM=y
-CONFIG_USB_TMC=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_STORAGE_DEBUG=y
-CONFIG_USB_MDC800=y
-CONFIG_MMC=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MMC_SDHCI_OF_ESDHC=y
-CONFIG_DMADEVICES=y
-CONFIG_FSL_DMA=y
-CONFIG_ASYNC_TX_DMA=y
-# CONFIG_IOMMU_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_EXT4_FS=y
-CONFIG_XFS_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_WBUF_VERIFY=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RUBIN=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V4=y
-CONFIG_NFSD=y
-CONFIG_CIFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_RCU_CPU_STALL_TIMEOUT=60
-# CONFIG_RCU_CPU_STALL_INFO is not set
-# CONFIG_FTRACE is not set
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA1_PPC=y
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_DEV_TALITOS=y

board/arcturus/ppc-ucp1020/patches/linux/0001-Arcturus-uCP1020-BSP-support.patch

@@ -1,462 +0,0 @@
-From a243628639e12a4bd0a737eac78a12ed240cd137 Mon Sep 17 00:00:00 2001
-From: Oleksandr G Zhadan <oleks@arcturusnetworks.com>
-Date: Mon, 18 Jul 2016 10:40:16 -0400
-Subject: [PATCH] Arcturus uCP1020 BSP support
-
-The uCP1020 product family (ucp1020) is an Arcturus Networks Inc.
-System on Modules product featuring a NXP QorIQ P1020 CPU,
-optionally populated with 1 or 2 Gig-Ethernet PHYs,
-DDR3, NOR Flash, eMMC NAND Flash and/or SPI Flash.
-
-Signed-off-by: Oleksandr G Zhadan <oleks@arcturusnetworks.com>
-Signed-off-by: Michael Durrant <arcsupport@arcturusnetworks.com>
----
- arch/powerpc/boot/dts/ucp1020.dts         |  87 ++++++++++++
- arch/powerpc/boot/dts/ucp1020.dtsi        | 211 ++++++++++++++++++++++++++++++
- arch/powerpc/platforms/85xx/Kconfig       |   7 +
- arch/powerpc/platforms/85xx/Makefile      |   1 +
- arch/powerpc/platforms/85xx/ucp1020_som.c |  92 +++++++++++++
- 5 files changed, 398 insertions(+)
- create mode 100644 arch/powerpc/boot/dts/ucp1020.dts
- create mode 100644 arch/powerpc/boot/dts/ucp1020.dtsi
- create mode 100644 arch/powerpc/platforms/85xx/ucp1020_som.c
-
-diff --git a/arch/powerpc/boot/dts/ucp1020.dts b/arch/powerpc/boot/dts/ucp1020.dts
-new file mode 100644
-index 0000000..291e70a
---- /dev/null
-+++ b/arch/powerpc/boot/dts/ucp1020.dts
-@@ -0,0 +1,87 @@
-+/*
-+ * uCP1020 Tree Source (32-bit address map)
-+ *
-+ * Copyright 2013-2016 Arcturus Networks Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/include/ "fsl/p1020si-pre.dtsi"
-+/ {
-+	model = "arcturus,uCP1020";
-+	compatible = "arcturus,uCP1020";
-+
-+	memory {
-+		device_type = "memory";
-+	};
-+
-+	lbc: localbus@ffe05000 {
-+		reg = <0 0xffe05000 0 0x1000>;
-+
-+		/* NOR Flash */
-+		ranges = <0x0 0x0 0x0 0xec000000 0x04000000>;
-+	};
-+
-+	soc: soc@ffe00000 {
-+		ranges = <0x0 0x0 0xffe00000 0x100000>;
-+	};
-+
-+	pci0: pcie@ffe09000 {
-+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
-+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
-+		reg = <0 0xffe09000 0 0x1000>;
-+		pcie@0 {
-+			ranges = <0x2000000 0x0 0xa0000000
-+				  0x2000000 0x0 0xa0000000
-+				  0x0 0x20000000
-+
-+				  0x1000000 0x0 0x0
-+				  0x1000000 0x0 0x0
-+				  0x0 0x100000>;
-+		};
-+	};
-+
-+	pci1: pcie@ffe0a000 {
-+		reg = <0 0xffe0a000 0 0x1000>;
-+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
-+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
-+		pcie@0 {
-+			ranges = <0x2000000 0x0 0x80000000
-+				  0x2000000 0x0 0x80000000
-+				  0x0 0x20000000
-+
-+				  0x1000000 0x0 0x0
-+				  0x1000000 0x0 0x0
-+				  0x0 0x100000>;
-+		};
-+	};
-+};
-+
-+/include/ "ucp1020.dtsi"
-+/include/ "fsl/p1020si-post.dtsi"
-diff --git a/arch/powerpc/boot/dts/ucp1020.dtsi b/arch/powerpc/boot/dts/ucp1020.dtsi
-new file mode 100644
-index 0000000..7cff949
---- /dev/null
-+++ b/arch/powerpc/boot/dts/ucp1020.dtsi
-@@ -0,0 +1,211 @@
-+/*
-+ * uCP1020 Device Tree Source stub (no addresses or top-level ranges)
-+ *
-+ * Copyright 2013-2016 Arcturus Networks Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *     * Redistributions of source code must retain the above copyright
-+ *       notice, this list of conditions and the following disclaimer.
-+ *     * Redistributions in binary form must reproduce the above copyright
-+ *       notice, this list of conditions and the following disclaimer in the
-+ *       documentation and/or other materials provided with the distribution.
-+ *     * Neither the name of Freescale Semiconductor nor the
-+ *       names of its contributors may be used to endorse or promote products
-+ *       derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+&lbc {
-+	nor@0,0 {
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		compatible = "cfi-flash";
-+		reg = <0x0 0x0 0x04000000>;
-+		bank-width = <2>;
-+		device-width = <1>;
-+
-+		partition@100000 {
-+			/* 7MB - PART 0 */
-+			reg = <0x00100000 0x00700000>;
-+			label = "0";
-+		};
-+
-+		partition@800000 {
-+			/* 32MB - PART 1 */
-+			reg = <0x0800000 0x02000000>;
-+			label = "1";
-+		};
-+
-+		partition@2800000 {
-+			/* 8MB - PART 2 */
-+			reg = <0x02800000 0x00800000>;
-+			label = "2";
-+		};
-+
-+		partition@3000000 {
-+			/* (16MB - 512K) - PART 3 JFFS 2 */
-+			reg = <0x03000000 0x00f80000>;
-+			label = "3";
-+		};
-+
-+		partition@0 {
-+			/* 512KB - bootloader[u-boot, uCbootloader] */
-+			reg = <0x0 0x00080000>;
-+			label = "BOOT_SPI";
-+		};
-+
-+		partition@3f80000 {
-+			/* 512KB - bootloade NOR r[u-boot, uCbootloader] */
-+			reg = <0x03f80000 0x00080000>;
-+			label = "B";
-+		};
-+
-+		partition@80000 {
-+			/* 256KB - bootloaders environment (uCenv) */
-+			reg = <0x00080000 0x00040000>;
-+	
-+			label = "E";
-+		};
-+
-+		partition@C0000 {
-+			/* 256KB - bootloaders environment (u-boot) */
-+			reg = <0x000C0000 0x00040000>;
-+			label = "UENV";
-+		};
-+	};
-+};
-+
-+&soc {
-+	i2c@3000 {
-+		spoc@14 {
-+			compatible = "conexant,cx2070x";
-+			reg = <0x14>;
-+		};
-+	};
-+
-+	i2c@3100 {
-+			dtt@4C {
-+				compatible = "national,lm90";
-+				reg = <0x4C>;
-+			};
-+	};
-+
-+	spi@7000 {
-+		flash@0 {
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+			compatible = "winbond,w25q80bl";
-+			reg = <0>;
-+			spi-max-frequency = <40000000>; /* input clock */
-+
-+			partition@0 {
-+				label = "SPI MBR";
-+				reg = <0x00000000 0x00002000>;
-+				read-only;
-+			};
-+			partition@2000 {
-+				label = "SPI ENV";
-+				reg = <0x00002000 0x00006000>;
-+				read-only;
-+			};
-+			partition@8000 {
-+				label = "SPI FS";
-+				reg = <0x00008000 0x000F8000>;
-+			};
-+		};
-+		flash@3 {
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+			compatible = "spansion,s25fl008k";
-+			reg = <3>;
-+			spi-max-frequency = <40000000>; /* input clock */
-+			partition@0 {
-+				label = "SPI USER";
-+				reg = <0x00000000 0x00100000>;
-+			};
-+		};
-+	};
-+
-+	usb@22000 {
-+		phy_type = "ulpi";
-+		dr_mode = "host";
-+	};
-+
-+	mdio@24000 {
-+		phy0: ethernet-phy@4 {
-+			interrupt-parent = <&mpic>;
-+			interrupts = <4 1>;
-+			reg = <0x04>;
-+		};
-+
-+		phy1: ethernet-phy@6 {
-+			interrupt-parent = <&mpic>;
-+			interrupts = <8 1>;
-+			reg = <0x6>;
-+		};
-+	};
-+
-+	enet0: ethernet@b0000 {
-+		phy-handle = <&phy0>;
-+		phy-connection-type = "rgmii-id";
-+	};
-+
-+	enet1: ethernet@b1000 {
-+		status = "disabled";
-+	};
-+
-+	enet2: ethernet@b2000 {
-+		phy-handle = <&phy1>;
-+		phy-connection-type = "rgmii-id";
-+	};
-+
-+	gpio0: gpio@f000 {
-+		compatible = "fsl,mpc8572-gpio", "fsl,pq3-gpio";
-+		reg = <0xf000 0x1000>;
-+		interrupts = <47 2>;
-+		interrupt-parent = <&mpic>;
-+		#gpio-cells = <2>;
-+		gpio-controller;
-+	};
-+
-+	gpio-leds {
-+		compatible = "gpio-leds";
-+		gpio5 {
-+			label = "led1";		/* LED15 */
-+			gpios = <&gpio0 5 0>;
-+		};
-+		gpio12 {
-+			label = "led2";		/* LED16 */
-+			gpios = <&gpio0 12 0>;
-+		};
-+		gpio13 {
-+			label = "led3";		/* LED17 */
-+			gpios = <&gpio0 13 0>;
-+		};
-+		gpio7 {
-+			label = "led4";		/* LED18 */
-+			gpios = <&gpio0 7 0>;
-+		};
-+		gpio6 {
-+			label = "led5";		/* LED19 */
-+			gpios = <&gpio0 6 0>;
-+		};
-+	};
-+};
-diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
-index 2fb4b24..81a944f 100644
---- a/arch/powerpc/platforms/85xx/Kconfig
-+++ b/arch/powerpc/platforms/85xx/Kconfig
-@@ -241,6 +241,13 @@ config SGY_CTS1000
- 	help
- 	  Enable this to support functionality in Servergy's CTS-1000 systems.
- 
-+config UCP1020_SOM
-+	bool "Arcturus uCP1020 Rev.1.3 System on Module"
-+	select DEFAULT_UIMAGE
-+	help
-+	  This option enables support for the Arcturus Networks Inc. 
-+	  uCP1020 System on Module.
-+
- config MVME2500
- 	bool "Artesyn MVME2500"
- 	select DEFAULT_UIMAGE
-diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
-index 1fe7fb9..84f2b9a 100644
---- a/arch/powerpc/platforms/85xx/Makefile
-+++ b/arch/powerpc/platforms/85xx/Makefile
-@@ -31,4 +31,5 @@ obj-$(CONFIG_XES_MPC85xx) += xes_mpc85xx.o
- obj-$(CONFIG_GE_IMP3A)	  += ge_imp3a.o
- obj-$(CONFIG_PPC_QEMU_E500) += qemu_e500.o
- obj-$(CONFIG_SGY_CTS1000) += sgy_cts1000.o
-+obj-$(CONFIG_UCP1020_SOM) += ucp1020_som.o
- obj-$(CONFIG_MVME2500)	  += mvme2500.o
-diff --git a/arch/powerpc/platforms/85xx/ucp1020_som.c b/arch/powerpc/platforms/85xx/ucp1020_som.c
-new file mode 100644
-index 0000000..777e8ad
---- /dev/null
-+++ b/arch/powerpc/platforms/85xx/ucp1020_som.c
-@@ -0,0 +1,92 @@
-+/*
-+ * Arcturus Networks Inc. uCP1020 module Setup
-+ *
-+ * Copyright 2014-2016 Arcturus Networks Inc.
-+ *
-+ * by Oleksandr G Zhadan & Michael Durrant (www.ArcturusNetworks.com)
-+ *
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ */
-+
-+#include <linux/stddef.h>
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/kdev_t.h>
-+#include <linux/delay.h>
-+#include <linux/seq_file.h>
-+#include <linux/interrupt.h>
-+#include <linux/of_platform.h>
-+
-+#include <asm/time.h>
-+#include <asm/machdep.h>
-+#include <asm/pci-bridge.h>
-+#include <mm/mmu_decl.h>
-+#include <asm/prom.h>
-+#include <asm/udbg.h>
-+#include <asm/mpic.h>
-+#include <asm/fsl_guts.h>
-+
-+#include <sysdev/fsl_soc.h>
-+#include <sysdev/fsl_pci.h>
-+#include "smp.h"
-+
-+#include "mpc85xx.h"
-+
-+void __init ucp1020_som_pic_init(void)
-+{
-+	struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
-+	  MPIC_SINGLE_DEST_CPU,
-+	  0, 256, " OpenPIC  ");
-+
-+	BUG_ON(mpic == NULL);
-+
-+	mpic_init(mpic);
-+}
-+
-+/*
-+ * Setup the architecture
-+ */
-+static void __init ucp1020_som_setup_arch(void)
-+{
-+	if (ppc_md.progress)
-+		ppc_md.progress("uCP1020_SoM_setup_arch()", 0);
-+
-+	mpc85xx_smp_init();
-+
-+	fsl_pci_assign_primary();
-+	pr_info("\n\t%s (http://www.arcturusnetworks.com)\n", ppc_md.name);
-+}
-+
-+machine_arch_initcall(ucp1020, mpc85xx_common_publish_devices);
-+machine_arch_initcall(ucp1020, swiotlb_setup_bus_notifier);
-+
-+/*
-+ * Called very early, device-tree isn't unflattened
-+ */
-+static int __init ucp1020_probe(void)
-+{
-+	unsigned long root = of_get_flat_dt_root();
-+
-+	if (of_flat_dt_is_compatible(root, "arcturus,uCP1020"))
-+		return 1;
-+	return 0;
-+}
-+
-+define_machine(ucp1020) {
-+	.name			= "uCP1020 SoM - Arcturus Networks Inc.",
-+	.probe			= ucp1020_probe,
-+	.setup_arch		= ucp1020_som_setup_arch,
-+	.init_IRQ		= ucp1020_som_pic_init,
-+#ifdef CONFIG_PCI
-+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
-+#endif
-+	.get_irq		= mpic_get_irq,
-+	.restart		= fsl_rstcr_restart,
-+	.calibrate_decr		= generic_calibrate_decr,
-+#ifdef DEBUG 
-+	.progress		= udbg_progress,
-+#endif
-+};
--- 
-2.1.4
-

board/arcturus/ppc-ucp1020/patches/linux/0002-p1020-esdhc-controller-reserved-bit.patch

@@ -1,28 +0,0 @@
-From 4c74fd1266287deca0c1ff091071c5b8558b9735 Mon Sep 17 00:00:00 2001
-From: Oleksandr G Zhadan <oleks@arcturusnetworks.com>
-Date: Mon, 18 Jul 2016 10:45:41 -0400
-Subject: [PATCH 1/1] p1020 esdhc controller reserved bit
-
-Prevent SDHCI core from writing reserved bits, where
-p1020 reserved bit is SDHCI_CTRL_HISPD, not 0x01(SDHCI_CTRL_LED).
-
-Signed-off-by: Oleksandr G Zhadan <oleks@arcturusnetworks.com>
-Signed-off-by: Michael Durrant <arcsupport@arcturusnetworks.com>
----
- drivers/mmc/host/sdhci-esdhc.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/drivers/mmc/host/sdhci-esdhc.h b/drivers/mmc/host/sdhci-esdhc.h
-index a870c42..b45de0a 100644
---- a/drivers/mmc/host/sdhci-esdhc.h
-+++ b/drivers/mmc/host/sdhci-esdhc.h
-@@ -45,6 +45,6 @@
- #define ESDHC_DMA_SYSCTL	0x40c
- #define ESDHC_DMA_SNOOP		0x00000040
- 
--#define ESDHC_HOST_CONTROL_RES	0x01
-+#define ESDHC_HOST_CONTROL_RES	(SDHCI_CTRL_HISPD)
- 
- #endif /* _DRIVERS_MMC_SDHCI_ESDHC_H */
--- 
-2.1.4

board/arcturus/ppc-ucp1020/readme.txt

@@ -1,73 +0,0 @@
-Arcturus uCP1020 SoM
-====================
-
-This tutorial describes how to use the predefined Buildroot
-configuration for the Arcturus uCP1020 SoM platform.
-
-Additional information about this module can be found at
-<www.arcturusnetworks.com/products/ucp1020>
-
-Building
---------
-
-  make arcturus_ucp1020_defconfig
-  make
-
-Result of the build
--------------------
-
-After building, you should obtain this tree:
-
-    output/images/
-    +-- rootfs.jffs2
-    +-- rootfs.tar
-    +-- u-boot.bin
-    +-- ucp1020.dtb
-    +-- uImage
-
-Flashing
---------
-
-You'll need to program the files created by buildroot into the NOR flash.
-
-1. Program the new U-Boot binary (optional)
-    If you don't feel confident upgrading your bootloader then don't do it,
-    it's unnecessary most of the time.
-
-    B$ tftp u-boot.bin
-    B$ protect off 0xeff80000 +$filesize
-    B$ erase 0xeff80000 +$filesize
-    B$ cp.b $loadaddr 0xeff80000 $filesize
-
-2. Program the kernel
-
-    B$ tftp uImage
-    B$ erase 0xec140000 +$filesize
-    B$ cp.b $loadaddr 0xec140000 $filesize
-
-3. Program the DTB
-
-    B$ tftp ucp1020.dtb
-    B$ erase 0xec100000 +$filesize
-    B$ cp.b $loadaddr 0xec100000 $filesize
-
-4. Program the jffs2 root filesystem
-
-    B$ tftp rootfs.jffs2
-    B$ erase 0xec800000 0xee8fffff
-    B$ cp.b $loadaddr 0xec800000 $filesize
-
-5. Booting your new system
-
-    B$ setenv norboot 'setenv bootargs root=/dev/mtdblock1 rootfstype=jffs2 console=$consoledev,$baudrate;bootm 0xec140000 - 0xec100000'
-
-    If you want to set this boot option as default:
-
-    B$ setenv bootcmd 'run norboot'
-    B$ saveenv
-
-    ...or for a single boot:
-
-    B$ run norboot
-
-Good Luck !

board/arm/foundation-v8/readme.txt

@@ -3,14 +3,14 @@ ARM software simulator of the AArch64 architecture.
 
 First, one has to download the AArch64 software simulator from:
 
-  https://silver.arm.com/download/download.tm?pv=2663527
+  https://silver.arm.com/download/download.tm?pv=1509509
 
 Then, use the arm_foundationv8_defconfig configuration to build your
 Buildroot system.
 
 Finally, boot your system with:
 
- ${LOCATION_OF_FOUNDATIONV8_SIMULATOR}/models/Linux64_GCC-4.7/Foundation_Platform \
+ ${LOCATION_OF_FOUNDATIONV8_SIMULATOR}/Foundation_v8 \
     --image output/images/linux-system.axf \
     --block-device output/images/rootfs.ext2 \
     --network=nat

board/arm/juno/linux-juno-defconfig

@@ -1,169 +0,0 @@
-CONFIG_SMP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
-CONFIG_AUDIT=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_TASKSTATS=y
-CONFIG_TASK_DELAY_ACCT=y
-CONFIG_TASK_XACCT=y
-CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_MEMCG=y
-CONFIG_MEMCG_SWAP=y
-CONFIG_MEMCG_KMEM=y
-CONFIG_CGROUP_HUGETLB=y
-CONFIG_SCHED_AUTOGROUP=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_PROFILING=y
-CONFIG_JUMP_LABEL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_ARCH_VEXPRESS=y
-CONFIG_PCI=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_HOST_GENERIC=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_HOTPLUG_PCI_PCIE=y
-CONFIG_HOTPLUG_PCI=y
-CONFIG_NR_CPUS=6
-CONFIG_PREEMPT=y
-CONFIG_KSM=y
-CONFIG_TRANSPARENT_HUGEPAGE=y
-CONFIG_CMA=y
-CONFIG_CMDLINE="console=ttyAMA0"
-CONFIG_COMPAT=y
-CONFIG_CPU_IDLE=y
-CONFIG_ARM_CPUIDLE=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_INTERACTIVE=y
-CONFIG_ARM_BIG_LITTLE_CPUFREQ=y
-CONFIG_ARM_DT_BL_CPUFREQ=y
-CONFIG_ARM_SCPI_CPUFREQ=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_BPF_JIT=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_SATA_AHCI=y
-CONFIG_SATA_AHCI_PLATFORM=y
-CONFIG_AHCI_XGENE=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_PATA_OF_PLATFORM=y
-CONFIG_NETDEVICES=y
-CONFIG_TUN=y
-CONFIG_SKY2=y
-CONFIG_SMC91X=y
-CONFIG_SMSC911X=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_SERIO_AMBAKMI=y
-CONFIG_LEGACY_PTY_COUNT=16
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SERIAL_XILINX_PS_UART=y
-CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_DESIGNWARE_PLATFORM=y
-CONFIG_I2C_SLAVE=y
-CONFIG_SPI=y
-CONFIG_SPI_PL022=y
-CONFIG_PTP_1588_CLOCK=m
-CONFIG_GPIO_PL061=y
-CONFIG_GPIO_XGENE=y
-CONFIG_POWER_RESET_XGENE=y
-CONFIG_POWER_RESET_SYSCON=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_VEXPRESS=m
-CONFIG_DRM=y
-CONFIG_DRM_I2C_NXP_TDA998X=y
-CONFIG_DRM_ARM=y
-CONFIG_DRM_HDLCD=y
-CONFIG_DRM_VIRTUAL_HDLCD=y
-CONFIG_FB_ARMCLCD=y
-CONFIG_LOGO=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_HCD_PLATFORM=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PLATFORM=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_ISP1760=y
-CONFIG_NOP_USB_XCEIV=y
-CONFIG_USB_ULPI=y
-CONFIG_MMC=y
-CONFIG_MMC_ARMMMCI=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MMC_SPI=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_EFI=y
-CONFIG_RTC_DRV_PL030=y
-CONFIG_RTC_DRV_PL031=y
-CONFIG_DMADEVICES=y
-CONFIG_PL330_DMA=y
-CONFIG_COMMON_CLK_SCPI=y
-CONFIG_ARM_TIMER_SP804=y
-CONFIG_MAILBOX=y
-CONFIG_ARM_MHU=y
-CONFIG_PHY_XGENE=y
-CONFIG_ARM_SCPI_PROTOCOL=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_FANOTIFY=y
-CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
-CONFIG_QUOTA=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_FUSE_FS=y
-CONFIG_CUSE=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_EFIVAR_FS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_VIRTUALIZATION=y
-CONFIG_KVM=y
-CONFIG_DYNAMIC_DEBUG=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_FS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_LOCKUP_DETECTOR=y
-CONFIG_SECURITY=y
-CONFIG_CRYPTO_ANSI_CPRNG=y
-CONFIG_ARM64_CRYPTO=y
-CONFIG_CRYPTO_SHA1_ARM64_CE=y
-CONFIG_CRYPTO_SHA2_ARM64_CE=y
-CONFIG_CRYPTO_GHASH_ARM64_CE=y
-CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
-CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SOC=y
-CONFIG_SND_SIMPLE_CARD=y
-CONFIG_SND_DESIGNWARE_I2S=y
-CONFIG_CMA=y
-CONFIG_CMA_SIZE_MBYTES=64

board/arm/juno/readme.txt

@@ -1,134 +0,0 @@
-ARM Juno r1/r0
-
-Intro
-=====
-
-These instructions apply to all models of the ARM Juno:
-  - Juno r0 (does not support PCIe)
-  - Juno r1 (supports PCIe)
-  - Juno r2 (Big Cluster with A72)
-
-Buildroot will generate the kernel image, device tree blob, bootloader binaries
-and a minimal root filesystem.
-
-How to build it
-===============
-
-Configure Buildroot
--------------------
-
-Configuring Buildroot is pretty simple, just execute:
-
-  $ make arm_juno_defconfig
-
-Build the rootfs, kernel and DTB
---------------------------------
-
-Note: you will need to have access to the network, since Buildroot will
-download the packages' sources.
-
-You may now build your rootfs with:
-
-  $ make
-
-(This may take a while)
-
-Result of the build
--------------------
-
-After building, you should obtain this tree:
-
-    output/images/
-    +-- rootfs.tar
-    +-- juno.dtb (if Juno r0 is used)
-    +-- juno-r1.dtb (if Juno r1 is used)
-    +-- juno-r2.dtb (if Juno r2 is used)
-    +-- Image
-    +-- bl1.bin
-    +-- bl2.bin
-    +-- bl2u.bin
-    +-- bl31.bin
-    +-- fip.bin
-    +-- scp-fw.bin
-    +-- u-boot.bin
-
-Preparing your rootfs
-======================
-
-Format your pen drive as a ext3 filesystem by executing:
-
-   $ mkfs.ext3 /dev/<your device>
-
-Preparing your rootfs
-======================
-
-Format your pen drive as a ext3 filesystem by executing:
-
-   $ mkfs.ext3 /dev/<your device>
-
-Installing your rootfs
-======================
-
-After mounting the pen drive please execute the following:
-
-   $ sudo tar -xvf output/images/rootfs.tar -C <pen drive mount path>
-
-When completed make sure to unmount the device:
-
-   $ umount <pen drive mount path>
-
-Insert the pen drive in one of the ARM Juno' USB type A connectors.
-
-Configure *.dtb in the boot configuration for Juno r0
-=====================================================
-
-SITE1/HBI0262B/images.txt
-.....
-NOR3UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
-NOR3ADDRESS: 0x00C00000          ;Image Flash Address
-NOR3FILE: \SOFTWARE\juno.dtb     ;Image File Name
-NOR3NAME: board.dtb              ;Specify Image name to preserve file extension
-NOR3LOAD: 00000000               ;Image Load Address
-NOR3ENTRY: 00000000              ;Image Entry Point
-......
-
-Configure *.dtb in the boot configuration for Juno r1
-=====================================================
-
-SITE1/HBI0262C/images.txt
-......
-NOR3UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
-NOR3ADDRESS: 0x00C00000          ;Image Flash Address
-NOR3FILE: \SOFTWARE\juno-r1.dtb  ;Image File Name
-NOR3NAME: board.dtb              ;Specify target filename to preserve file extension
-NOR3LOAD: 00000000               ;Image Load Address
-NOR3ENTRY: 00000000              ;Image Entry Point
-......
-
-Configure *.dtb in the boot configuration for Juno r2
-=====================================================
-
-SITE1/HBI0262D/images.txt
-......
-NOR3UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
-NOR3ADDRESS: 0x02000000          ;Image Flash Address
-NOR3FILE: \SOFTWARE\juno-r2.dtb  ;Image File Name
-NOR3NAME: board.dtb              ;Specify target filename to preserve file extension
-NOR3LOAD: 00000000               ;Image Load Address
-NOR3ENTRY: 00000000              ;Image Entry Point
-......
-
-Installing kernel image and DTB
-===============================
-
-1. Connect to the ARM Juno UART0 and execute USB_ON in the terminal
-2. Connect a USB cable between your PC and ARM Juno USB type B connector
-   A mass storage device should appear in your desktop.
-3. Open the software/ folder
-4. Copy the 'Image' file to software/
-5. Copy the 'juno-r1.dtb' (r1), 'juno.dtb' (r0) or juno-r2.dtb (r2) file to software/
-6. Copy the bootloader binaries (bl1.bin and fip.bin) to software/
-7. Press the red button in the front pannel of ARM Juno
-
-At this time, the board will erase the Flash entry for each new item and
-replace it with the lastest ones.

board/armadeus/apf28/linux-3.12.config

@@ -0,0 +1,185 @@
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_EMBEDDED=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_BSD_DISKLABEL=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_ARCH_MULTI_V7 is not set
+CONFIG_ARCH_MXS=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CPU_IDLE=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+CONFIG_IPV6=y
+CONFIG_CAN=m
+CONFIG_CAN_VCAN=m
+CONFIG_CAN_FLEXCAN=m
+CONFIG_BT=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+CONFIG_BT_HCIBTUSB=m
+CONFIG_CFG80211=m
+CONFIG_MAC80211=m
+CONFIG_MAC80211_RC_PID=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_FW_LOADER=m
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_M25P80=y
+# CONFIG_M25PXX_USE_FAST_READ is not set
+CONFIG_MTD_SST25L=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_GPMI_NAND=y
+CONFIG_MTD_UBI=y
+CONFIG_EEPROM_AT24=y
+CONFIG_EEPROM_AT25=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_SCH=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_NETDEVICES=y
+CONFIG_RTL8187=m
+CONFIG_RT2X00=m
+CONFIG_RT73USB=m
+CONFIG_ZD1211RW=m
+CONFIG_INPUT_JOYDEV=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_UINPUT=m
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_MXS_AUART=y
+CONFIG_TTY_PRINTK=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MXS=y
+CONFIG_SPI=y
+CONFIG_SPI_BITBANG=m
+CONFIG_SPI_MXS=y
+CONFIG_SPI_SPIDEV=m
+CONFIG_GPIO_SYSFS=y
+CONFIG_HWMON=m
+CONFIG_WATCHDOG=y
+CONFIG_STMP3XXX_RTC_WATCHDOG=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_MEDIA_SUPPORT=m
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_FB=y
+CONFIG_FB_MXS=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_PWM=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_MON=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_ACM=y
+CONFIG_USB_PRINTER=y
+CONFIG_USB_WDM=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_UDC=y
+CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_USB_MXS_PHY=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_ETH=m
+CONFIG_MMC=y
+CONFIG_MMC_MXS=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_STMP=y
+CONFIG_DMADEVICES=y
+CONFIG_MXS_DMA=y
+CONFIG_STAGING=y
+CONFIG_MXS_LRADC=y
+CONFIG_IIO=y
+CONFIG_PWM=y
+CONFIG_PWM_MXS=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT2_FS_XIP=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_UBIFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_DEBUG_FS=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set

board/armadeus/apf28/linux-4.4.config

@@ -1,185 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_BSD_DISKLABEL=y
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_MXS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CPU_IDLE=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-CONFIG_IPV6=y
-CONFIG_CAN=m
-CONFIG_CAN_VCAN=m
-CONFIG_CAN_FLEXCAN=m
-CONFIG_BT=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_BT_HCIBTUSB=m
-CONFIG_CFG80211=m
-CONFIG_MAC80211=m
-CONFIG_MAC80211_RC_PID=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_FW_LOADER=m
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_M25P80=y
-# CONFIG_M25PXX_USE_FAST_READ is not set
-CONFIG_MTD_SST25L=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_GPMI_NAND=y
-CONFIG_MTD_UBI=y
-CONFIG_EEPROM_AT24=y
-CONFIG_EEPROM_AT25=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_CHR_DEV_SCH=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_NETDEVICES=y
-CONFIG_RTL8187=m
-CONFIG_RT2X00=m
-CONFIG_RT73USB=m
-CONFIG_ZD1211RW=m
-CONFIG_INPUT_JOYDEV=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_MXS_AUART=y
-CONFIG_TTY_PRINTK=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MXS=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=m
-CONFIG_SPI_MXS=y
-CONFIG_SPI_SPIDEV=m
-CONFIG_GPIO_SYSFS=y
-CONFIG_HWMON=m
-CONFIG_WATCHDOG=y
-CONFIG_STMP3XXX_RTC_WATCHDOG=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_MEDIA_SUPPORT=m
-CONFIG_MEDIA_CAMERA_SUPPORT=y
-CONFIG_FB=y
-CONFIG_FB_MXS=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_GENERIC is not set
-CONFIG_BACKLIGHT_PWM=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_ACM=y
-CONFIG_USB_PRINTER=y
-CONFIG_USB_WDM=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_CHIPIDEA=y
-CONFIG_USB_CHIPIDEA_UDC=y
-CONFIG_USB_CHIPIDEA_HOST=y
-CONFIG_USB_MXS_PHY=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_ETH=m
-CONFIG_MMC=y
-CONFIG_MMC_MXS=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_ONESHOT=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_STMP=y
-CONFIG_DMADEVICES=y
-CONFIG_MXS_DMA=y
-CONFIG_STAGING=y
-CONFIG_MXS_LRADC=y
-CONFIG_IIO=y
-CONFIG_PWM=y
-CONFIG_PWM_MXS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT2_FS_XIP=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_UBIFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_FS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y

board/armadeus/apf51/linux-3.12.config

@@ -0,0 +1,266 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_EMBEDDED=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_BSD_DISKLABEL=y
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_MXC=y
+CONFIG_MXC_IRQ_PRIOR=y
+CONFIG_MACH_IMX51_DT=y
+CONFIG_ARM_THUMBEE=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_CPU_FREQ_IMX=y
+CONFIG_CPU_IDLE=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_SUSPEND is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+CONFIG_IPV6=y
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+CONFIG_CAN_VCAN=m
+CONFIG_CAN_MCP251X=m
+CONFIG_BT=m
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_HIDP=m
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_CFG80211=m
+CONFIG_MAC80211=m
+CONFIG_MAC80211_RC_PID=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_FW_LOADER=m
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_MXC=y
+CONFIG_MTD_UBI=y
+CONFIG_MISC_DEVICES=y
+CONFIG_EEPROM_AT24=y
+CONFIG_EEPROM_AT25=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_SCH=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_SMSC_PHY=y
+CONFIG_NET_ETHERNET=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_RTL8187=m
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_RT2X00=m
+CONFIG_RT73USB=m
+CONFIG_ZD1211RW=m
+CONFIG_INPUT_JOYDEV=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_KEYBOARD_IMX=m
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_WM831X=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_UINPUT=m
+CONFIG_INPUT_WM831X_ON=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_IMX=y
+CONFIG_SPI=y
+CONFIG_SPI_IMX=y
+CONFIG_SPI_SPIDEV=m
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_WM831X=m
+CONFIG_POWER_SUPPLY=m
+CONFIG_WM831X_BACKUP=m
+CONFIG_WM831X_POWER=m
+CONFIG_HWMON=m
+CONFIG_SENSORS_AS1531=m
+CONFIG_SENSORS_WM831X=m
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_WM831X_WATCHDOG=m
+CONFIG_IMX2_WDT=y
+CONFIG_MFD_WM831X_I2C=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_MFD_IMX_IPU_V3=y
+CONFIG_MEDIA_SUPPORT=m
+CONFIG_VIDEO_DEV=m
+# CONFIG_RC_CORE is not set
+# CONFIG_MEDIA_TUNER_SIMPLE is not set
+# CONFIG_MEDIA_TUNER_TDA8290 is not set
+# CONFIG_MEDIA_TUNER_TDA827X is not set
+# CONFIG_MEDIA_TUNER_TDA18271 is not set
+# CONFIG_MEDIA_TUNER_TDA9887 is not set
+# CONFIG_MEDIA_TUNER_TEA5761 is not set
+# CONFIG_MEDIA_TUNER_TEA5767 is not set
+# CONFIG_MEDIA_TUNER_MT20XX is not set
+# CONFIG_MEDIA_TUNER_MT2060 is not set
+# CONFIG_MEDIA_TUNER_MT2266 is not set
+# CONFIG_MEDIA_TUNER_MT2131 is not set
+# CONFIG_MEDIA_TUNER_QT1010 is not set
+# CONFIG_MEDIA_TUNER_XC2028 is not set
+# CONFIG_MEDIA_TUNER_XC5000 is not set
+# CONFIG_MEDIA_TUNER_MXL5005S is not set
+# CONFIG_MEDIA_TUNER_MXL5007T is not set
+# CONFIG_MEDIA_TUNER_MC44S803 is not set
+# CONFIG_MEDIA_TUNER_MAX2165 is not set
+# CONFIG_MEDIA_TUNER_TDA18218 is not set
+CONFIG_VIDEO_VIVI=m
+CONFIG_USB_VIDEO_CLASS=m
+# CONFIG_RADIO_ADAPTERS is not set
+CONFIG_FB=y
+CONFIG_FB_MX5=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_SOUND=m
+# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set
+CONFIG_SND=m
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=m
+CONFIG_SND_IMX_SOC=m
+CONFIG_SND_SOC_APF51_DEV_WM8960=m
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+CONFIG_USB_MON=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_MXC=y
+CONFIG_USB_ACM=y
+CONFIG_USB_PRINTER=y
+CONFIG_USB_WDM=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_USB_PHY=y
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_USB_GPIO_VBUS=y
+CONFIG_USB_ULPI=y
+CONFIG_USB_GADGET=m
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_DEBUG_FS=y
+CONFIG_USB_ETH=m
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_USB_G_SERIAL=m
+CONFIG_USB_CDC_COMPOSITE=m
+CONFIG_USB_G_MULTI=m
+CONFIG_USB_G_MULTI_CDC=y
+CONFIG_USB_G_HID=m
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_ESDHC_IMX=y
+CONFIG_MMC_SPI=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_WM831X_STATUS=m
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_MXC=y
+CONFIG_RTC_DRV_WM831X=y
+CONFIG_STAGING=y
+CONFIG_IIO=m
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT2_FS_XIP=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_CMODE_NONE=y
+CONFIG_UBIFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_DEBUG_FS=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set

board/armadeus/apf51/linux-4.4.config

@@ -1,278 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_BSD_DISKLABEL=y
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_MXC=y
-CONFIG_MXC_IRQ_PRIOR=y
-CONFIG_SOC_IMX51=y
-CONFIG_ARM_THUMBEE=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_CPU_FREQ_IMX=y
-CONFIG_CPU_IDLE=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_SUSPEND is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-CONFIG_IPV6=y
-CONFIG_CAN=m
-CONFIG_CAN_RAW=m
-CONFIG_CAN_BCM=m
-CONFIG_CAN_VCAN=m
-CONFIG_CAN_MCP251X=m
-CONFIG_BT=m
-CONFIG_BT_L2CAP=y
-CONFIG_BT_SCO=y
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_HIDP=m
-CONFIG_BT_HCIBTUSB=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_CFG80211=m
-CONFIG_MAC80211=m
-CONFIG_MAC80211_RC_PID=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_FW_LOADER=m
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_MXC=y
-CONFIG_MTD_UBI=y
-CONFIG_MISC_DEVICES=y
-CONFIG_EEPROM_AT24=y
-CONFIG_EEPROM_AT25=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_CHR_DEV_SCH=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_NETDEVICES=y
-CONFIG_MII=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_RTL8187=m
-CONFIG_LIBERTAS=m
-CONFIG_LIBERTAS_SDIO=m
-CONFIG_RT2X00=m
-CONFIG_RT73USB=m
-CONFIG_ZD1211RW=m
-CONFIG_INPUT_JOYDEV=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_GPIO=m
-CONFIG_KEYBOARD_IMX=m
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_WM831X=y
-CONFIG_TOUCHSCREEN_MC13XXX=m
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_MC13783_PWRBUTTON=m
-CONFIG_INPUT_UINPUT=m
-CONFIG_INPUT_WM831X_ON=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_IMX=y
-CONFIG_SPI=y
-CONFIG_SPI_IMX=y
-CONFIG_SPI_SPIDEV=m
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_WM831X=m
-CONFIG_POWER_SUPPLY=y
-CONFIG_WM831X_BACKUP=m
-CONFIG_WM831X_POWER=m
-CONFIG_HWMON=m
-CONFIG_SENSORS_AS1531=m
-CONFIG_SENSORS_MC13783_ADC=m
-CONFIG_SENSORS_WM831X=m
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_WM831X_WATCHDOG=m
-CONFIG_IMX2_WDT=y
-CONFIG_MFD_MC13XXX_I2C=y
-CONFIG_MFD_WM831X_I2C=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_MC13892=m
-CONFIG_IMX_IPUV3_CORE=y
-CONFIG_DRM=y
-CONFIG_MFD_IMX_IPU_V3=y
-CONFIG_MEDIA_SUPPORT=m
-CONFIG_VIDEO_DEV=m
-# CONFIG_RC_CORE is not set
-# CONFIG_MEDIA_TUNER_SIMPLE is not set
-# CONFIG_MEDIA_TUNER_TDA8290 is not set
-# CONFIG_MEDIA_TUNER_TDA827X is not set
-# CONFIG_MEDIA_TUNER_TDA18271 is not set
-# CONFIG_MEDIA_TUNER_TDA9887 is not set
-# CONFIG_MEDIA_TUNER_TEA5761 is not set
-# CONFIG_MEDIA_TUNER_TEA5767 is not set
-# CONFIG_MEDIA_TUNER_MT20XX is not set
-# CONFIG_MEDIA_TUNER_MT2060 is not set
-# CONFIG_MEDIA_TUNER_MT2266 is not set
-# CONFIG_MEDIA_TUNER_MT2131 is not set
-# CONFIG_MEDIA_TUNER_QT1010 is not set
-# CONFIG_MEDIA_TUNER_XC2028 is not set
-# CONFIG_MEDIA_TUNER_XC5000 is not set
-# CONFIG_MEDIA_TUNER_MXL5005S is not set
-# CONFIG_MEDIA_TUNER_MXL5007T is not set
-# CONFIG_MEDIA_TUNER_MC44S803 is not set
-# CONFIG_MEDIA_TUNER_MAX2165 is not set
-# CONFIG_MEDIA_TUNER_TDA18218 is not set
-CONFIG_VIDEO_VIVI=m
-CONFIG_USB_VIDEO_CLASS=m
-# CONFIG_RADIO_ADAPTERS is not set
-CONFIG_FB=y
-CONFIG_FB_MX5=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_SOUND=m
-# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set
-CONFIG_SND=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_USB is not set
-CONFIG_SND_SOC=m
-CONFIG_SND_IMX_SOC=m
-CONFIG_SND_SOC_APF51_DEV_WM8960=m
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
-# CONFIG_USB_OTG_WHITELIST is not set
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_MXC=y
-CONFIG_USB_ACM=y
-CONFIG_USB_PRINTER=y
-CONFIG_USB_WDM=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_CHIPIDEA=y
-CONFIG_USB_CHIPIDEA_UDC=y
-CONFIG_USB_CHIPIDEA_HOST=y
-CONFIG_USB_PHY=y
-CONFIG_NOP_USB_XCEIV=y
-CONFIG_USB_GPIO_VBUS=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_GADGET_DEBUG_FS=y
-CONFIG_USB_ETH=m
-CONFIG_USB_MASS_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_CDC_COMPOSITE=m
-CONFIG_USB_G_MULTI=m
-CONFIG_USB_G_MULTI_CDC=y
-CONFIG_USB_G_HID=m
-CONFIG_MMC=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MMC_SDHCI_ESDHC_IMX=y
-CONFIG_MMC_SPI=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_WM831X_STATUS=m
-CONFIG_LEDS_MC13783=m
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_MXC=y
-CONFIG_RTC_DRV_WM831X=y
-CONFIG_RTC_DRV_MC13XXX=m
-CONFIG_STAGING=y
-CONFIG_DRM_IMX=y
-CONFIG_DRM_IMX_FB_HELPER=y
-CONFIG_DRM_IMX_PARALLEL_DISPLAY=y
-CONFIG_DRM_IMX_TVE=y
-CONFIG_DRM_IMX_IPUV3=y
-CONFIG_IIO=m
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT2_FS_XIP=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_EXT4_FS=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_UBIFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_FS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set

board/armadeus/readme.txt

@@ -1,89 +0,0 @@
-Introduction
-============
-
-Armadeus APFxx are Systems On Module (SOM) based on Freescale/NXP i.MX
-processors associated with an FPGA (except on APF28). Non volatile
-data are stored in on-module NOR or NAND Flash, depending on the
-model. These SOM can be used on Armadeus development boards or with
-custom docking boards.
-
-Supported platforms
-===================
-
-Buildroot currently supports the following Armadeus platforms with the
-associated defconfigs:
-
- * APF9328 SOM + devt boards -> armadeus_apf9328_defconfig
- * APF27 SOM + devt board    -> armadeus_apf27_defconfig
- * APF51 SOM + devt board    -> armadeus_apf51_defconfig
- * APF28 SOM + devt board    -> armadeus_apf28_defconfig
-
-Vanilla Linux versions are preferred to Freescale's one in these
-configurations.
-
-How to build it
-===============
-
-Configure Buildroot
--------------------
-
-Let's say you own an APFxx SOM with it's corresponding development
-board, all you have to do is:
-
-  $ make armadeus_apfxx_defconfig
-
-where "apfxx" is the version of your SOM.
-
-Launch build
-------------
-
-  $ make
-
-Result of the build
--------------------
-
-When the build is finished, you will end up with:
-
-    output/images/
-    ├── imx**-apfxxdev.dtb	[1]
-    ├── rootfs.jffs2		[2]
-    ├── rootfs.tar
-    ├── rootfs.ubi		[2]
-    ├── rootfs.ubifs		[2]
-    └── uImage
-
-[1] Only if the kernel version used uses a Device Tree.
-[2] .ubi/.ubifs images are not available on APF9328 and replaced by a
-    .jffs2 one in this case.
-
-Building U-Boot is currently not supported in these configurations.
-
-Installation
-============
-
-You will require a serial connection to the board and a TFTP server on
-your Host PC. Assuming your server is configured for exporting
-/tftpboot/ directory, you will have to copy the generated images to
-it:
-
-  $ cp output/images/uImage /tftpboot/apfxx-linux.bin
-  $ cp output/images/*.dtb /tftpboot/
-  $ cp output/images/rootfs.ubi /tftpboot/apfxx-rootfs.ubi
-  $ cp output/images/rootfs.jffs2 /tftpboot/apfxx-rootfs.jffs2
-
-where "apfxx" is the version of your SOM, as used with _defconfigs.
-
-Then on your serial terminal, all you have to do is:
-
-* interrupt the boot process and access U-Boot console by pressing any
-  key when booting,
-* configure board and server IP addresses with "ipaddr" and "serverip"
-  environment variables,
-* if you want to update kernel:
-  BIOS > run update_kernel
-* if you want to update device tree:
-  BIOS > run update_dtb
-* if you want to update rootfs:
-  BIOS > run update_rootfs
-
-That's it !

board/atmel/at91sam9260ek/linux-3.9.config

@@ -0,0 +1,98 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_KERNEL_LZO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_AT91=y
+CONFIG_ARCH_AT91SAM9260=y
+CONFIG_ARCH_AT91SAM9260_SAM9XE=y
+CONFIG_MACH_AT91SAM9260EK=y
+CONFIG_MACH_CAM60=y
+CONFIG_MACH_SAM9_L9260=y
+CONFIG_MACH_AFEB9260=y
+CONFIG_MACH_USB_A9260=y
+CONFIG_MACH_QIL_A9260=y
+CONFIG_MACH_CPU9260=y
+CONFIG_MACH_FLEXIBITY=y
+CONFIG_MACH_SNAPPER_9260=y
+CONFIG_MACH_AT91SAM_DT=y
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+# CONFIG_ARM_THUMB is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
+CONFIG_FPE_NWFPE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_GPIO=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_AT91SAM9X_WATCHDOG=y
+# CONFIG_USB_HID is not set
+CONFIG_USB=y
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_MON=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_DEBUG=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_USB_G_SERIAL=m
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_AT91SAM9=y
+CONFIG_EXT2_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_UBIFS_FS=y
+CONFIG_CRAMFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_LL=y

board/atmel/flasher.sh

@@ -1,4 +1,4 @@
-#!/usr/bin/env bash
+#!/bin/bash
 
 BUILDIR=$1
 TTY=$2

board/atmel/readme.txt

@@ -1,6 +1,10 @@
-This document explains how to set up a basic Buildroot system on various
-Atmel boards. Additional details can also be found on the Linux4SAM website:
-http://www.at91.com/linux4sam/bin/view/Linux4SAM/
+Flashing the NAND using SAM-BA
+==============================
+
+This document explains how to flash a basic Buildroot system on various
+Atmel boards. Additional details can
+also be found on the Linux4SAM website, in particular here:
+http://www.at91.com/linux4sam/bin/view/Linux4SAM/GettingStarted
 
 This guide covers the following configurations:
  - at91sam9g45m10ek_defconfig
@@ -10,49 +14,20 @@ This guide covers the following configurations:
  - atmel_sama5d3xek_defconfig (sama5d31, sama5d33, sama5d34, sama5d35,
    sama5d36)
  - atmel_sama5d3_xplained_defconfig
- - atmel_sama5d3_xplained_dev_defconfig
- - atmel_sama5d3_xplained_mmc_defconfig
- - atmel_sama5d3_xplained_mmc_dev_defconfig
+ - atmel_sama5d4ek_defconfig
  - atmel_sama5d4_xplained_defconfig
- - atmel_sama5d4_xplained_dev_defconfig
- - atmel_sama5d4_xplained_mmc_defconfig
- - atmel_sama5d4_xplained_mmc_dev_defconfig
- - atmel_sama5d2_xplained_mmc_defconfig
- - atmel_sama5d2_xplained_mmc_dev_defconfig
 
 These configurations will use AT91Bootstrap, u-boot and a linux kernel from
-the git trees maintained by Atmel.
+the git trees maintained by Atmel. They also build u-boot SPL when
+available, it can replace AT91Bootstrap.
 
-The configurations labeled as 'dev' provide a development rootfs with tools to
-tests the features of the SoC:
-- ALSA tools to test audio
-- FFMPEG to record video from the ISI/ISC
-- I2C, SPI, CAN, etc. tools
-- modetest for LCD screens, HDMI
-- Wilc1000 firmware for the Atmel Wireless sdio module
-- SSH for convenience
-- GDB/GDB server for debug
 
 Configuring and building Buildroot
-==================================
-
-For most configurations listed above, the Buildroot configuration
-assumes the system will be flashed on NAND. In this case, after
-building Buildroot, follow the instructions in the "Flashing the NAND
-using SAM-BA" section below.
-
-For the Xplained boards, an alternative Buildroot configuration is
-provided to boot from an SD card. Those configurations are labeled as
-'mmc'. In this case, after building Buildroot, follow the instructions
-in the "Preparing the SD card" section.
-
-To configure and build Buildroot, run:
+----------------------------------
 
   make <board>_defconfig
   make
 
-Flashing the NAND using SAM-BA
-==============================
 
 Flashing the board
 ------------------
@@ -130,44 +105,3 @@ board/atmel/flasher.sh /tmp/atmel_sama5d3_xplained/ /dev/ttyACM0 sama5d3_xplaine
 
 Reboot, the system should boot up to the buildroot login invite.
 
-Preparing the SD card
-=====================
-
-An image named sdcard.img is automatically generated. With this image,
-you no longer have to care about the creation of the partition and
-copying files to the SD card.
-
-You need at least a 1GB SD card. All the data on the SD card will be
-lost. To copy the image on the SD card:
-
-/!\ Caution be sure to do it on the right mmcblk device /!\
-
-dd if=output/images/sdcard.img of=/dev/mmcblk0
-
-Insert your SD card in your Xplained board, and enjoy. The default
-U-Boot environment will load properly the kernel and Device Tree blob
-from the first partition of the SD card, so everything works
-automatically.
-
-By default a 16MB FAT partition is created. It contains at91bootstrap,
-u-boot, the kernel image and all dtb variants for your board. The dtb
-used is the basic one:
-
-U-Boot> print
-[...]
-bootcmd=fatload mmc 1:1 0x21000000 at91-sama5d2_xplained.dtb; fatload mmc 1:1 0x22000000 zImage; bootz 0x22000000 - 0x21000000
-[...]
-
-If you want to use a variant such as the _pda7 one, you will have to
-update your u-boot environment:
-
-U-Boot> setenv bootcmd 'fatload mmc 1:1 0x21000000 at91-sama5d2_xplained_pda7.dtb; fatload mmc 1:1 0x22000000 zImage; bootz 0x22000000 - 0x21000000'
-U-Boot> save
-Saving Environment to FAT...
-writing uboot.env
-done
-
-A 512MB ext4 partition is also created to store the rootfs generated.
-
-If you want to customize the size of the partitions and their content,
-take a look at the the genimage.cfg file in the board directory.

board/atmel/sama5d2_xplained_mmc/genimage.cfg

@@ -1,34 +0,0 @@
-# Image for SD card boot on Atmel SAMA5D2 Xplained boards
-#
-image boot.vfat {
-	vfat {
-		files = {
-			"zImage",
-			"at91-sama5d2_xplained.dtb",
-			"at91-sama5d2_xplained_pda4.dtb",
-			"at91-sama5d2_xplained_pda7.dtb",
-			"at91-sama5d2_xplained_pda7b.dtb",
-			"boot.bin",
-			"u-boot.bin"
-		}
-	}
-	size = 16M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition boot {
-		partition-type = 0xC
-		bootable = "true"
-		image = "boot.vfat"
-		offset = 1M
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-		size = 512M
-	}
-}

board/atmel/sama5d2_xplained_mmc/post-image.sh

@@ -1,14 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname $0)"
-GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
-GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
-
-rm -rf "${GENIMAGE_TMP}"
-
-genimage                               \
-	--rootpath "${TARGET_DIR}"     \
-	--tmppath "${GENIMAGE_TMP}"    \
-	--inputpath "${BINARIES_DIR}"  \
-	--outputpath "${BINARIES_DIR}" \
-	--config "${GENIMAGE_CFG}"

board/atmel/sama5d3_xplained_mmc/genimage.cfg

@@ -1,34 +0,0 @@
-# Image for SD card boot on Atmel SAMA5D3 Xplained boards
-#
-image boot.vfat {
-	vfat {
-		files = {
-			"zImage",
-			"at91-sama5d3_xplained.dtb",
-			"at91-sama5d3_xplained_pda4.dtb",
-			"at91-sama5d3_xplained_pda7.dtb",
-			"at91-sama5d3_xplained_pda7b.dtb",
-			"boot.bin",
-			"u-boot.bin"
-		}
-	}
-	size = 16M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition boot {
-		partition-type = 0xC
-		bootable = "true"
-		image = "boot.vfat"
-		offset = 1M
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-		size = 512M
-	}
-}

board/atmel/sama5d3_xplained_mmc/post-image.sh

@@ -1,14 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname $0)"
-GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
-GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
-
-rm -rf "${GENIMAGE_TMP}"
-
-genimage                               \
-	--rootpath "${TARGET_DIR}"     \
-	--tmppath "${GENIMAGE_TMP}"    \
-	--inputpath "${BINARIES_DIR}"  \
-	--outputpath "${BINARIES_DIR}" \
-	--config "${GENIMAGE_CFG}"

board/atmel/sama5d4_xplained_mmc/genimage.cfg

@@ -1,35 +0,0 @@
-# Image for SD card boot on Atmel SAMA5D4 Xplained boards
-#
-image boot.vfat {
-	vfat {
-		files = {
-			"zImage",
-			"at91-sama5d4_xplained.dtb",
-			"at91-sama5d4_xplained_hdmi.dtb",
-			"at91-sama5d4_xplained_pda4.dtb",
-			"at91-sama5d4_xplained_pda7.dtb",
-			"at91-sama5d4_xplained_pda7b.dtb",
-			"boot.bin",
-			"u-boot.bin"
-		}
-	}
-	size = 16M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition boot {
-		partition-type = 0xC
-		bootable = "true"
-		image = "boot.vfat"
-		offset = 1M
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-		size = 512M
-	}
-}

board/atmel/sama5d4_xplained_mmc/post-image.sh

@@ -1,14 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname $0)"
-GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
-GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
-
-rm -rf "${GENIMAGE_TMP}"
-
-genimage                               \
-	--rootpath "${TARGET_DIR}"     \
-	--tmppath "${GENIMAGE_TMP}"    \
-	--inputpath "${BINARIES_DIR}"  \
-	--outputpath "${BINARIES_DIR}" \
-	--config "${GENIMAGE_CFG}"

board/atmel/xplained/readme.txt

@@ -0,0 +1,73 @@
+Atmel SAMA5D3 Xplained board
+============================
+
+This document explains how to set up a basic Buildroot system on the
+Atmel SAMA5D3 Xplained board, whose main site is
+http://www.atmel.com/tools/ATSAMA5D3-XPLD.aspx. Additional details can
+also be found on the http://www.at91.com/linux4sam/bin/view/Linux4SAM/
+web site.
+
+Note that the default Buildroot configuration is prepared to boot from
+an SD card: the first stage bootloader, second stage bootloader,
+kernel image and root filesystem are all located on the SD card. Some
+adjustments in the bootloader configuration will be needed to boot
+from NAND flash, see board/atmel/nandflash.txt
+
+Configuring and building Buildroot
+----------------------------------
+
+  make atmel_sama5d3_xplained_mmc_defconfig
+  make
+
+Preparing the SD card
+---------------------
+
+The SD card must be partitioned with at least two partitions: one
+FAT16 partition for the bootloaders, kernel image and Device Tree
+blob, and one ext4 partition for the root filesystem. To partition the
+SD card:
+
+sudo sfdisk -uM /dev/mmcblk0 <<EOF
+,64,6
+;
+EOF
+
+This creates a 64 MB partition for the FAT16 filesystem (type 6) and
+uses the rest for the ext4 filesystem used for the root filesystem.
+
+Then, format both partitions:
+
+sudo mkfs.msdos -n boot /dev/mmcblk0p1
+sudo mkfs.ext4 -L rootfs -O ^huge_file /dev/mmcblk0p2
+
+ Note: the -O ^huge_file option is needed to avoid enabling the huge
+ files features of ext4 (to support files larges than 2 TB), which
+ needs the kernel option CONFIG_LBDAF to be enabled.
+
+Mount both partitions (if not done automatically by your system):
+
+sudo mount /dev/mmcblk0p1 /media/boot
+sudo mount /dev/mmcblk0p2 /media/rootfs
+
+Copy the bootloaders, kernel image and Device Tree blob to the first
+partition:
+
+cp output/images/uboot-spl.bin /media/boot/boot.bin
+cp output/images/u-boot.img /media/boot/u-boot.img
+cp output/images/zImage /media/boot/zImage
+cp output/images/at91-sama5d3_xplained.dtb /media/boot/at91-sama5d3_xplained.dtb
+
+Extract the root filesystem to the second partition:
+
+sudo tar -C /media/rootfs -xf output/images/rootfs.tar
+
+Unmount both partitions:
+
+sudo umount /media/boot
+sudo umount /media/rootfs
+
+Insert your SD card in your Xplained board, and enjoy. The default
+U-Boot environment will properly load the kernel and Device Tree blob
+from the first partition of the SD card, so everything works
+automatically.
+

board/avnet/zedboard/readme.txt

@@ -0,0 +1,64 @@
+This is the buildroot board support for the Avnet Zedboard. The Zedboard is
+a development board based on the Xilinx Zynq-7000 based All-Programmable
+System-On-Chip.
+
+Zedboard information including schematics, reference designs, and manuals are
+available from http://www.zedboard.org .
+
+Steps to create a working system for Zedboard:
+
+1) make zedboard_defconfig
+2) make
+3) copy files BOOT.BIN, u-boot-dtb.img, rootfs.cpio.uboot,
+	uImage, zynq-zed.dtb into your SD card
+4) boot your Zedboard
+
+The expected output:
+
+ U-Boot SPL 2015.07 (Jul 22 2015 - 12:01:55)
+ mmc boot
+ reading system.dtb
+ spl_load_image_fat_os: error reading image system.dtb, err - -1
+ reading u-boot-dtb.img
+ reading u-boot-dtb.img
+
+ U-Boot 2015.07 (Jul 22 2015 - 12:01:55 +0200)
+
+ Model: Zynq ZED Board
+ I2C:   ready
+ DRAM:  ECC disabled 512 MiB
+ MMC:   zynq_sdhci: 0
+ Using default environment
+ ...
+
+When using an older U-Boot then 2015.07, a working ps7_init.c
+file is required to be installed into the U-Boot directory
+structure. From 2015.07, the major Zynq-based boards are
+supported without any manual intervention.
+
+Resulting system
+----------------
+A FAT32 partition should be created at the beginning of the SD Card
+and the following files should be installed:
+	/BOOT.BIN
+	/zynq-zed.dtb
+	/uImage
+	/rootfs-cpio.uboot
+	/u-boot-dtb.img
+
+
+All needed files can be taken from output/images/
+
+BOOT.BIN, uImage and u-boot-dtb.img are direct copies of the same files
+available on output/images/
+
+There is a patch attached that redefines the U-Boot's environment
+to work with Buildroot out-of-the-box.
+
+You can alter the booting procedure by creating a file uEnv.txt
+in the root of the SD card. It is a plain text file in format
+<key>=<value> one per line:
+
+kernel_image=myimage
+modeboot=myboot
+myboot=...

board/avnet/zedboard/uboot/0001-zynq-Create-zedboard-specific-U-Boot-environment.patch

@@ -0,0 +1,46 @@
+From a4c0058967a551385da5e16d2787d9f704cab225 Mon Sep 17 00:00:00 2001
+From: Jan Viktorin <viktorin@rehivetech.com>
+Date: Thu, 18 Jun 2015 16:26:02 +0200
+Subject: [PATCH 2/2] zynq: Create zedboard-specific U-Boot environment
+
+---
+ include/configs/zynq_zed.h | 25 +++++++++++++++++++++++++
+ 1 file changed, 25 insertions(+)
+
+diff --git a/include/configs/zynq_zed.h b/include/configs/zynq_zed.h
+index 946de95..2400a88 100644
+--- a/include/configs/zynq_zed.h
++++ b/include/configs/zynq_zed.h
+@@ -24,4 +24,29 @@
+
+ #include <configs/zynq-common.h>
+
++#undef CONFIG_EXTRA_ENV_SETTINGS
++#define CONFIG_EXTRA_ENV_SETTINGS \
++	"envload=mmc info && if fatload mmc 0 0x1000 uEnv.txt;"\
++	" then echo Importing uEnv.txt; env import -t 0x1000"  \
++	" $filesize; fi;\0"                                    \
++	"bootcmd=run $modeboot\0"                              \
++	"modeboot=sdboot\0"                                    \
++	"baudrate=115200\0"                                    \
++	"bootenv=uEnv.txt\0"                                   \
++	"devicetree_image=zynq-zed.dtb\0"                      \
++	"kernel_image=uImage\0"                                \
++	"ramdisk_image=rootfs.cpio.uboot\0"                    \
++	"fpga_image=system.bit\0"                              \
++	"sdboot=echo Booting from SD...;"                      \
++	" run envload; run fpgaboot;"                          \
++	" fatload mmc 0 0x1000000 ${kernel_image}"             \
++	" && fatload mmc 0 0x2000000 ${ramdisk_image}"         \
++	" && fatload mmc 0 0x3000000 ${devicetree_image}"      \
++	" && bootm 0x1000000 0x2000000 0x3000000\0"            \
++	"fpgaboot=if fatload mmc 0 0x1000000 ${fpga_image};"   \
++	" then echo Booting FPGA from ${fpga_image};"          \
++	" fpga info 0 && fpga loadb 0 0x1000000 $filesize;"    \
++	" else echo FPGA image ${fpga_image} was not found,"   \
++	" skipping...; fi;\0"
++
+ #endif /* __CONFIG_ZYNQ_ZED_H */
+--
+2.4.3
+

board/beagleboardx15/genimage.cfg

@@ -1,26 +0,0 @@
-image boot.vfat {
-	vfat {
-		files = {
-			"MLO",
-			"u-boot.img"
-		}
-	}
-	size = 4M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition u-boot {
-		partition-type = 0xC
-		bootable = "true"
-                image = "boot.vfat"
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-		size = 512M
-	}
-}

board/beagleboardx15/post-image.sh

@@ -1,15 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname $0)"
-
-GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
-GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
-
-rm -rf "${GENIMAGE_TMP}"
-
-genimage \
-    --rootpath "${TARGET_DIR}" \
-    --tmppath "${GENIMAGE_TMP}" \
-    --inputpath "${BINARIES_DIR}" \
-    --outputpath "${BINARIES_DIR}" \
-    --config "${GENIMAGE_CFG}"

board/beagleboardx15/readme.txt

@@ -1,49 +0,0 @@
-BeagleBoard X15
-
-Intro
-=====
-This config currently supports the beagleboard x15,
-and generates a barebone image.
-
-The image must be flashed to a SD card to be used.
-
-How to build it
-===============
-
-  $ make beagleboardx15_defconfig
-
-Then you can edit the build options using
-
-  $ make menuconfig
-
-Compile all and build a sdcard image:
-
-  $ make
-
-Result of the build
--------------------
-
-After building, you should get a tree like this:
-
-  output/images/
-  ├── am57xx-beagle-x15.dtb
-  ├── am57xx-beagle-x15-revb1.dtb
-  ├── boot.vfat
-  ├── MLO
-  ├── rootfs.ext2
-  ├── rootfs.ext4
-  ├── rootfs.tar
-  ├── sdcard.img
-  ├── u-boot.img
-  ├── u-boot-spl.bin
-  └── zImage
-
-How to write the microSD card
-=============================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
-  $ sudo dd if=output/images/sdcard.img of=/dev/sdX

board/beaglebone/genimage.cfg

@@ -1,32 +0,0 @@
-image boot.vfat {
-	vfat {
-		files = {
-			"MLO",
-			"u-boot.img",
-			"zImage",
-			"uEnv.txt",
-			"am335x-evm.dtb",
-			"am335x-evmsk.dtb",
-			"am335x-bone.dtb",
-			"am335x-boneblack.dtb",
-		}
-	}
-	size = 16M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition u-boot {
-		partition-type = 0xC
-		bootable = "true"
-                image = "boot.vfat"
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-		size = 512M
-	}
-}

board/beaglebone/linux-3.12.config

@@ -0,0 +1,251 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EXPERT=y
+CONFIG_SLAB=y
+CONFIG_PROFILING=y
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_ARCH_OMAP2PLUS=y
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_MUX_DEBUG=y
+CONFIG_ARCH_OMAP3=y
+CONFIG_ARCH_OMAP4=y
+CONFIG_SOC_AM43XX=y
+# CONFIG_ARCH_OMAP2PLUS_TYPICAL is not set
+# CONFIG_SOC_TI81XX is not set
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_DEVKIT8000 is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OMAP3530_LV_SOM is not set
+# CONFIG_MACH_OMAP3_TORPEDO is not set
+# CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3EVM is not set
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_TOUCHBOOK is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RM680 is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+# CONFIG_MACH_OMAP_ZOOM2 is not set
+# CONFIG_MACH_OMAP_ZOOM3 is not set
+# CONFIG_MACH_CM_T35 is not set
+# CONFIG_MACH_CM_T3517 is not set
+# CONFIG_MACH_IGEP0020 is not set
+# CONFIG_MACH_IGEP0030 is not set
+# CONFIG_MACH_SBC3530 is not set
+# CONFIG_MACH_OMAP_3630SDP is not set
+CONFIG_ARM_THUMBEE=y
+CONFIG_HAVE_ARM_ARCH_TIMER=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_HIGHMEM=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200"
+CONFIG_KEXEC=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_GENERIC_CPUFREQ_CPU0=y
+# CONFIG_ARM_OMAP2PLUS_CPUFREQ is not set
+CONFIG_FPE_NWFPE=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_BINFMT_MISC=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM_DEBUG=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_OMAP_OCP2SCP=y
+CONFIG_CONNECTOR=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_CROSSBAR=y
+CONFIG_EEPROM_93CX6=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_MD=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+CONFIG_TI_CPSW=y
+CONFIG_TI_CPTS=y
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_AT803X_PHY=y
+CONFIG_SMSC_PHY=y
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+CONFIG_SERIAL_OMAP=y
+CONFIG_SERIAL_OMAP_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_OMAP=y
+CONFIG_SPI=y
+CONFIG_SPI_OMAP24XX=y
+CONFIG_SPI_TI_QSPI=y
+CONFIG_PINCTRL_SINGLE=y
+CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_W1=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_THERMAL=y
+CONFIG_THERMAL_GOV_FAIR_SHARE=y
+CONFIG_THERMAL_GOV_USER_SPACE=y
+CONFIG_CPU_THERMAL=y
+CONFIG_TI_SOC_THERMAL=y
+CONFIG_TI_THERMAL=y
+CONFIG_WATCHDOG=y
+CONFIG_OMAP_WATCHDOG=y
+CONFIG_MFD_SYSCON=y
+CONFIG_MFD_TPS65217=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_PBIAS=y
+CONFIG_REGULATOR_TPS65023=y
+CONFIG_REGULATOR_TPS6507X=y
+CONFIG_REGULATOR_TPS65217=y
+CONFIG_REGULATOR_TIAVSCLASS0=y
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_DA8XX=y
+CONFIG_FB_DA8XX_TDA998X=y
+CONFIG_OMAP2_DSS=y
+CONFIG_OMAP2_DSS_SDI=y
+CONFIG_OMAP2_DSS_DSI=y
+CONFIG_FB_OMAP2=y
+CONFIG_DISPLAY_CONNECTOR_HDMI=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_MON=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_MUSB_HDRC=m
+CONFIG_USB_MUSB_OMAP2PLUS=m
+CONFIG_USB_MUSB_DSPS=m
+CONFIG_USB_TI_CPPI41_DMA=y
+CONFIG_USB_STORAGE=y
+CONFIG_AM335X_PHY_USB=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DEBUG=y
+CONFIG_USB_GADGET_DEBUG_FS=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_EEM=y
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_USB_G_MULTI=m
+CONFIG_USB_G_MULTI_CDC=y
+CONFIG_MMC=y
+CONFIG_MMC_UNSAFE_RESUME=y
+CONFIG_SDIO_UART=y
+CONFIG_MMC_OMAP=y
+CONFIG_MMC_OMAP_HS=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_OMAP=y
+CONFIG_DMADEVICES=y
+CONFIG_TI_EDMA=y
+CONFIG_DMA_OMAP=y
+CONFIG_TI_CPPI41=y
+CONFIG_COMMON_CLK_DEBUG=y
+CONFIG_OMAP_USB2=y
+CONFIG_OMAP_PIPE3=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=y
+CONFIG_QUOTA=y
+CONFIG_QFMT_V2=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+CONFIG_PROVE_LOCKING=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_CCITT=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC7=y
+CONFIG_LIBCRC32C=y
+CONFIG_AVERAGE=y

board/beaglebone/linux-4.1-sgx.fragment

@@ -1,12 +0,0 @@
-CONFIG_PREEMPT=y
-CONFIG_PREEMPT_COUNT=y
-CONFIG_OMAP2_DSS_INIT=y
-CONFIG_OMAP_DSS_BASE=y
-CONFIG_OMAP2_DSS=y
-CONFIG_OMAP2_DSS_DPI=y
-CONFIG_DRM_OMAP=y
-CONFIG_DRM_OMAP_NUM_CRTCS=2
-CONFIG_DRM_OMAP_WB_M2M=y
-CONFIG_DRM_TILCDC=y
-CONFIG_DRM_I2C_NXP_TDA998X=y
-CONFIG_DRM=y

board/beaglebone/patches/linux/0001-keep-jtag-clock-alive-for-debugger.patch

@@ -1,16 +0,0 @@
-This patch keeps the debugSS clock alive, it clocks the JTAG macro and enables
-access to the SoC via JTAG after the kernel booted.
-
-Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
----
-diff -Naur linux-orig/arch/arm/mach-omap2/omap_hwmod_33xx_data.c linux-52c4aa7cdb93d61f8008f380135beaf7b8fa6593/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
---- linux-orig/arch/arm/mach-omap2/omap_hwmod_33xx_data.c	2015-10-02 17:30:56.000000000 +0200
-+++ linux-52c4aa7cdb93d61f8008f380135beaf7b8fa6593/arch/arm/mach-omap2/omap_hwmod_33xx_data.c	2016-08-15 11:28:55.017617612 +0200
-@@ -208,6 +208,7 @@
- 	.name		= "debugss",
- 	.class		= &am33xx_debugss_hwmod_class,
- 	.clkdm_name	= "l3_aon_clkdm",
-+	.flags		= (HWMOD_INIT_NO_IDLE|HWMOD_INIT_NO_RESET), /* keep debugSS clock alive for JTAG */
- 	.main_clk	= "trace_clk_div_ck",
- 	.prcm		= {
- 		.omap4	= {

board/beaglebone/patches/linux/linux-0001-arm-Export-cache-flush-management-symbols-when-MULTI.patch

@@ -0,0 +1,34 @@
+From 29885f2f3d700341d322274db6ad085e601c0994 Mon Sep 17 00:00:00 2001
+From: Pantelis Antoniou <panto@antoniou-consulting.com>
+Date: Fri, 4 Jan 2013 00:32:33 +0200
+Subject: [PATCH 3/3] arm: Export cache flush management symbols when
+ !MULTI_CACHE
+
+When compiling a kernel without CONFIG_MULTI_CACHE enabled the
+dma access functions end up not being exported. Fix it.
+
+Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
+---
+ arch/arm/kernel/setup.c |    9 +++++++++
+ 1 file changed, 9 insertions(+)
+
+diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
+index da1d1aa..dcb678c 100644
+--- a/arch/arm/kernel/setup.c
++++ b/arch/arm/kernel/setup.c
+@@ -923,3 +923,12 @@ const struct seq_operations cpuinfo_op = {
+ 	.stop	= c_stop,
+ 	.show	= c_show
+ };
++
++/* export the cache management functions */
++#ifndef MULTI_CACHE
++
++EXPORT_SYMBOL(__glue(_CACHE,_dma_map_area));
++EXPORT_SYMBOL(__glue(_CACHE,_dma_unmap_area));
++EXPORT_SYMBOL(__glue(_CACHE,_dma_flush_range));
++
++#endif
+-- 
+1.7.10.4
+

board/beaglebone/post-image.sh

@@ -1,21 +1,6 @@
 #!/bin/sh
-# post-image.sh for CircuitCo BeagleBone and TI am335x-evm
+# post-image.sh for BeagleBone
 # 2014, Marcin Jabrzyk <marcin.jabrzyk@gmail.com>
-# 2016, Lothar Felten <lothar.felten@gmail.com>
-
-BOARD_DIR="$(dirname $0)"
 
 # copy the uEnv.txt to the output/images directory
 cp board/beaglebone/uEnv.txt $BINARIES_DIR/uEnv.txt
-
-GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
-GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
-
-rm -rf "${GENIMAGE_TMP}"
-
-genimage \
-    --rootpath "${TARGET_DIR}" \
-    --tmppath "${GENIMAGE_TMP}" \
-    --inputpath "${BINARIES_DIR}" \
-    --outputpath "${BINARIES_DIR}" \
-    --config "${GENIMAGE_CFG}"

board/beaglebone/readme.txt

@@ -1,52 +1,62 @@
-CircuitCo BeagleBone
-Texas Instuments AM335x Evaluation Module (TMDXEVM3358)
+BeagleBone
 
-Description
-===========
-
-This configuration will build a complete image for the beaglebone and
-the TI AM335x-EVM, the board type is identified by the on-board
-EEPROM. The configuration is based on the
-ti-processor-sdk-02.00.00.00. Device tree blobs for beaglebone
-variants and the evm-sk are built too.
-
-For Qt5 support support use the beaglebone_qt5_defconfig.
+Intro
+=====
+To be able to use BeagleBone board with the images generated by
+Buildroot, you have to prepare the SDCard.
 
 How to build it
 ===============
 
-Select the default configuration for the target:
-$ make beaglebone_defconfig
+  $ make beaglebone_defconfig
 
-Optional: modify the configuration:
-$ make menuconfig
+Then you can edit the build options using
 
-Build:
-$ make
+  $ make menuconfig
+
+Compile all and build rootfs image:
+
+  $ make
 
 Result of the build
+-------------------
+
+After building, you should get a tree like this:
+
+  output/images/
+  ├── am335x-boneblack.dtb
+  ├── am335x-bone.dtb
+  ├── MLO
+  ├── rootfs.ext2
+  ├── u-boot.img
+  ├── uEnv.txt
+  └── zImage
+
+
+Prepare your SDCard
 ===================
-output/images/
-├── am335x-boneblack.dtb
-├── am335x-bone.dtb
-├── am335x-evm.dtb
-├── am335x-evmsk.dtb
-├── boot.vfat
-├── MLO
-├── rootfs.ext2
-├── rootfs.tar
-├── sdcard.img
-├── u-boot.img
-├── uEnv.txt
-└── zImage
 
-To copy the image file to the sdcard use dd:
-$ dd if=output/images/sdcard.img of=/dev/XXX
+You need to prepare first partition in fat32 and marked as bootable,
+and second where you will write rootfs.
 
-Tested hardware
-===============
-am335x-evm (rev. 1.1A)
-beagleboneblack (rev. A5A)
-beaglebone (rev. A6)
+Copy the files to boot partition
 
-2016, Lothar Felten <lothar.felten@gmail.com>
+  $ cp MLO u-boot.img zImage uEnv.txt *.dtb /media/zzzzz
+
+where /media/zzzzz is the mount point.
+Then you need to write the rootfs image onto SDCard:
+
+  # dd if=rootfs.ext2 of=/dev/xxxxx
+
+where /dev/xxxxx is the second partition. Use:
+
+  # fdisk -l
+
+to check for correct one.
+
+Finish
+======
+
+Unmount all mounted SDCard partitions and insert the card to BeagleBone.
+Hold the "BOOT" button and apply power. Then release the "BOOT" button.
+The output is available on the serial console.

board/beaglebone/uEnv.txt

@@ -1,4 +1,3 @@
 bootpart=0:1
 bootdir=
-bootargs=console=ttyO0,115200n8 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait
-uenvcmd=run loadimage;run loadfdt;printenv bootargs;bootz ${loadaddr} - ${fdtaddr};
+uenvcmd=run loadimage;run loadramdisk;run findfdt;run loadfdt;run ramboot

board/boundarydevices/common/6x_bootscript.txt

@@ -1,130 +0,0 @@
-setenv bootargs ''
-
-if itest.s x6SX == "x${cpu}" || itest.s x7D == "x${cpu}"; then
-	a_script=0x80800000
-	a_zImage=0x80800000
-	a_fdt=0x83000000
-	m4=''
-	if itest.s "x1" == "x$m4enabled" ; then
-		run m4boot;
-		m4='-m4';
-	fi
-else
-	a_script=0x10800000
-	a_zImage=0x10800000
-	a_fdt=0x13000000
-fi
-
-setenv initrd_high 0xffffffff
-if itest.s "x" == "x${dtbname}" ; then
-	if itest.s x6SOLO == "x${cpu}" ; then
-		dtbname=imx6dl-${board}.dtb;
-	elif itest.s x6DL == "x${cpu}" ; then
-		dtbname=imx6dl-${board}.dtb;
-	elif itest.s x6QP == "x${cpu}" ; then
-		dtbname=imx6qp-${board}.dtb;
-	elif itest.s x6SX == "x${cpu}" ; then
-		dtbname=imx6sx-${board}${m4}.dtb;
-	elif itest.s x7D == "x${cpu}" ; then
-		dtbname=imx7d-${board}${m4}.dtb;
-	else
-		dtbname=imx6q-${board}.dtb;
-	fi
-fi
-
-if load ${dtype} ${disk}:1 ${a_script} uEnv.txt ; then
-    env import -t ${a_script} ${filesize}
-fi
-
-if itest.s x == x${bootdir} ; then
-	bootdir=/boot/
-fi
-
-if itest.s x${bootpart} == x ; then
-	bootpart=1
-fi
-
-if load ${dtype} ${disk}:${bootpart} ${a_fdt} ${bootdir}${dtbname} ; then
-	fdt addr ${a_fdt}
-	setenv fdt_high 0xffffffff
-else
-	echo "!!!! Error loading ${bootdir}${dtbname}";
-	exit;
-fi
-
-cmd_xxx_present=
-fdt resize
-if itest.s "x" != "x${cmd_custom}" ; then
-	run cmd_custom
-	cmd_xxx_present=1;
-fi
-
-if itest.s "x" != "x${cmd_hdmi}" ; then
-	run cmd_hdmi
-	cmd_xxx_present=1;
-	if itest.s x == x${allow_noncea} ; then
-		setenv bootargs ${bootargs} mxc_hdmi.only_cea=1;
-		echo "only CEA modes allowed on HDMI port";
-	else
-		setenv bootargs ${bootargs} mxc_hdmi.only_cea=0;
-		echo "non-CEA modes allowed on HDMI, audio may be affected";
-	fi
-fi
-
-if itest.s "x" != "x${cmd_lcd}" ; then
-	run cmd_lcd
-	cmd_xxx_present=1;
-fi
-if itest.s "x" != "x${cmd_lvds}" ; then
-	run cmd_lvds
-	cmd_xxx_present=1;
-fi
-if itest.s "x" != "x${cmd_lvds2}" ; then
-	run cmd_lvds2
-	cmd_xxx_present=1;
-fi
-
-if itest.s "x" == "x${cmd_xxx_present}" ; then
-	echo "!!!!!!!!!!!!!!!!"
-	echo "warning: your u-boot may be outdated, please upgrade"
-	echo "!!!!!!!!!!!!!!!!"
-fi
-
-setenv bootargs "${bootargs} console=${console},115200 vmalloc=400M consoleblank=0 rootwait fixrtc"
-
-if test "sata" = "${dtype}" ; then
-	setenv bootargs "${bootargs} root=/dev/sda${bootpart}" ;
-elif test "usb" = "${dtype}" ; then
-	setenv bootargs "${bootargs} root=/dev/sda${bootpart}" ;
-else
-	setenv bootargs "${bootargs} root=/dev/mmcblk${disk}p${bootpart}"
-fi
-
-if itest.s "x" != "x${disable_giga}" ; then
-	setenv bootargs ${bootargs} fec.disable_giga=1
-fi
-
-if itest.s "x" != "x${wlmac}" ; then
-	setenv bootargs ${bootargs} wlcore.mac=${wlmac}
-fi
-
-if itest.s "x" != "x${gpumem}" ; then
-	setenv bootargs ${bootargs} galcore.contiguousSize=${gpumem}
-fi
-
-if itest.s "x" != "x${cma}" ; then
-	setenv bootargs ${bootargs} cma=${cma}
-fi
-
-if itest.s "x" != "x${show_fdt}" ; then
-	fdt print /
-fi
-
-if itest.s "x" != "x${show_env}" ; then
-	printenv
-fi
-
-if load ${dtype} ${disk}:${bootpart} ${a_zImage} ${bootdir}/zImage ; then
-	bootz ${a_zImage} - ${a_fdt}
-fi
-echo "Error loading kernel image"

board/boundarydevices/common/6x_upgrade.txt

@@ -1,69 +0,0 @@
-if itest.s a$uboot_defconfig == a; then
-        echo "Please set uboot_defconfig to the appropriate value"
-        exit
-fi
-
-offset=0x400
-a_uImage1=0x12000000
-a_uImage2=0x12400000
-
-if itest.s x6SX == "x${cpu}" || itest.s x7D == "x${cpu}"; then
-	a_uImage1=0x82000000
-	a_uImage2=0x82400000
-fi
-
-setenv stdout serial,vga
-echo "check U-Boot" ;
-
-if load ${dtype} ${disk}:1 ${a_uImage1} u-boot.$uboot_defconfig ; then
-else
-	echo "No U-Boot image found on SD card" ;
-	exit
-fi
-echo "read $filesize bytes from SD card" ;
-if sf probe || sf probe || sf probe 1 27000000 || sf probe 1 27000000 ; then
-	echo "probed SPI ROM" ;
-else
-	echo "Error initializing EEPROM" ;
-	exit
-fi ;
-if sf read ${a_uImage2} $offset $filesize ; then
-else
-	echo "Error reading boot loader from EEPROM" ;
-	exit
-fi
-if cmp.b ${a_uImage1} ${a_uImage2} $filesize ; then
-	echo "------- U-Boot versions match" ;
-	exit
-fi
-echo "Need U-Boot upgrade" ;
-echo "Program in 5 seconds" ;
-for n in 5 4 3 2 1 ; do
-	echo $n ;
-	sleep 1 ;
-done
-echo "erasing" ;
-sf erase 0 0xC0000 ;
-
-# two steps to prevent bricking
-echo "programming" ;
-setexpr a1 ${a_uImage1} + 0x400
-setexpr o1 ${offset} + 0x400
-setexpr s1 ${filesize} - 0x400
-sf write ${a1} ${o1} ${s1} ;
-sf write ${a_uImage1} $offset 0x400 ;
-
-echo "verifying" ;
-if sf read ${a_uImage2} $offset $filesize ; then
-else
-	echo "Error re-reading EEPROM" ;
-	exit
-fi
-if cmp.b ${a_uImage1} ${a_uImage2} $filesize ; then
-else
-	echo "Read verification error" ;
-	exit
-fi
-while echo "---- U-Boot upgraded. reset" ; do
-	sleep 120
-done

board/boundarydevices/common/genimage.cfg

@@ -1,18 +0,0 @@
-# Minimal SD card image for Boundary Devices platforms
-#
-# It does not need a boot section for a bootloader since it is booted
-# from its NOR flash memory.
-#
-# To update the bootloader, execute the following from U-Boot prompt:
-# => run upgradeu
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-		size = 512M
-	}
-}

board/boundarydevices/common/post-image.sh

@@ -1,16 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname $0)"
-GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
-GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
-
-rm -rf "${GENIMAGE_TMP}"
-
-genimage                           \
-	--rootpath "${TARGET_DIR}"     \
-	--tmppath "${GENIMAGE_TMP}"    \
-	--inputpath "${BINARIES_DIR}"  \
-	--outputpath "${BINARIES_DIR}" \
-	--config "${GENIMAGE_CFG}"
-
-exit $?

board/boundarydevices/common/readme.txt

@@ -1,30 +0,0 @@
-Buildroot for Boundary Devices platforms:
-
-https://boundarydevices.com/product-category/popular-sbc-and-som-modules/
-
-Here is the list of targeted platforms per defconfig:
-
-- nitrogen6x_defconfig
-  - BD-SL-i.MX6 (SABRE-Lite)
-  - Nitrogen6X
-  - Nitrogen6_Lite
-  - Nitrogen6_MAX
-  - Nitrogen6_VM
-  - Nitrogen6_SOM
-  - Nitrogen6_SOMv2
-
-- nitrogen6sx_defconfig
-  - Nitrogen6_SoloX
-
-- nitrogen7_defconfig
-  - Nitrogen7
-
-To install, simply copy the image to a uSD card:
-
-$ sudo dd if=output/images/sdcard.img of=/dev/sdX
-
-Where 'sdX' is the device node of the uSD partition.
-
-To upgrade u-boot, cancel autoboot and type:
-
-> run upgradeu

board/boundarydevices/nitrogen6x/6x_bootscript.txt

@@ -0,0 +1,186 @@
+setenv bootargs ''
+
+if ${fs}load ${dtype} ${disk}:1 10800000 uEnv.txt ; then
+    env import -t 10800000 $filesize
+fi
+
+if itest.s "x" == "x$dtbname" ; then
+	dtbname="imx6";
+	if itest.s x6SOLO == "x$cpu" ; then
+		dtbname=${dtbname}dl-;
+	elif itest.s x6DL == "x$cpu" ; then
+		dtbname=${dtbname}dl-;
+	else
+		dtbname=${dtbname}q-;
+	fi
+	if itest.s x == "x$board" ; then
+		board=sabrelite
+	fi
+	dtbname=${dtbname}${board}.dtb;
+fi
+
+if itest.s x == x${bootdir} ; then
+	bootdir=/boot/
+fi
+
+setenv fdt_addr 0x12000000
+if ${fs}load ${dtype} ${disk}:1 $fdt_addr ${bootdir}$dtbname ; then
+	fdt addr $fdt_addr
+	setenv fdt_high 0xffffffff
+else
+	echo "!!!! Error loading ${bootdir}$dtbname";
+	exit;
+fi
+
+# ------------------- HDMI detection
+i2c dev 1 ;
+if i2c probe 0x50 ; then
+	echo "------ have HDMI monitor";
+	if itest.s x == x$allow_noncea ; then
+		setenv bootargs $bootargs mxc_hdmi.only_cea=1;
+		echo "only CEA modes allowed on HDMI port";
+	else
+		setenv bootargs $bootargs mxc_hdmi.only_cea=0;
+		echo "non-CEA modes allowed on HDMI, audio may be affected";
+	fi
+else
+	fdt rm hdmi_display
+	echo "------ no HDMI monitor";
+fi
+
+# ------------------- LVDS detection
+if itest.s "x" != "x$lvds_1080p" ; then
+	echo "----- 1080P dual channel LVDS";
+	fdt rm okaya1024x600
+	fdt rm lg1280x800
+	fdt rm hannstar;
+	fdt set ldb split-mode 1
+	fdt set lvds_display interface_pix_fmt "RGB24"
+	fdt set ldb/lvds-channel@0 fsl,data-width <24>
+else
+	fdt rm ldb split-mode
+	fdt rm lvds1080p
+
+	# -------- LVDS0 (bottom on Nitrogen6_Max)
+	setenv have_lvds
+	i2c dev 2
+	if i2c probe 0x04 ; then
+		echo "------ have Freescale display";
+		setenv have_lvds 1
+	else
+		echo "------ no Freescale display";
+		fdt rm hannstar;
+	fi
+
+	if i2c probe 0x38 ; then
+		if itest.s "xLDB-WXGA" == "x$panel"; then
+			screenres=1280,800
+			fdt rm okaya1024x600
+		else
+			screenres=1024,600
+			fdt rm lg1280x800
+		fi
+		setenv have_lvds 1
+		setenv bootargs $bootargs ft5x06_ts.screenres=$screenres
+		if itest.s "x" -ne "x$calibration" ; then
+			setenv bootargs $bootargs ft5x06_ts.calibration=$calibration
+		fi
+	else
+		echo "------ no ft5x06 touch controller";
+		fdt rm okaya1024x600
+		fdt rm lg1280x800
+	fi
+
+	if itest.s "x" == "x$have_lvds"; then
+		fdt rm lvds_display;
+	fi
+
+	# -------- LVDS1 (top on Nitrogen6_Max)
+	if itest.s "xhannstar" == "x$lvds1_panel" ; then
+		echo "configure LVDS1 for Hannstar panel"
+		fdt rm okaya1024x600_2;
+		fdt rm lg1280x800_2;
+		fdt set lvds_display_2 status okay
+	elif itest.s "xokaya1024x600" == "x$lvds1_panel" ; then
+		echo "configure LVDS1 for 1024x600 panel"
+		fdt rm hannstar_2;
+		fdt rm lg1280x800_2;
+		fdt set lvds_display_2 status okay
+	elif itest.s "xlg1280x800" == "x$lvds1_panel" ; then
+		echo "configure LVDS1 for 1280x800 panel"
+		fdt rm hannstar_2;
+		fdt rm okaya1024x600_2;
+		fdt set lvds_display_2 status okay
+	else
+		fdt rm lvds_display_2 ; # ignore errors on boards != 6_max
+	fi
+fi
+
+# ------------------- LCD detection
+setenv have_lcd '';
+if i2c probe 0x48 ; then
+	setenv have_lcd 1;
+	echo "------- found TSC2004 touch controller";
+	if itest.s "x" -eq "x$tsc_calibration" ; then
+		setenv bootargs $bootargs tsc2004.calibration=-67247,-764,272499173,324,69283,-8653010,65536
+	else
+		setenv bootargs $bootargs tsc2004.calibration=$tsc_calibration
+	fi
+elif i2c probe 0x4d ; then
+	setenv have_lcd 1;
+	echo "------- found AR1020 touch controller";
+fi
+
+if itest.s "x" != "x$ignore_lcd" ; then
+	echo "------ ignoring LCD display";
+	setenv have_lcd '';
+fi
+
+if itest.s "x" != "x$have_lcd" ; then
+	echo "----- found LCD display";
+else
+	fdt rm lcd_display;
+fi
+
+setenv bootargs "$bootargs console=ttymxc1,115200 vmalloc=400M consoleblank=0 rootwait"
+
+if itest.s x$bootpart == x ; then
+	bootpart=1
+fi
+
+if test "sata" = "${dtype}" ; then
+	setenv bootargs "$bootargs root=/dev/sda$bootpart" ;
+else
+        if test "usb" = "${dtype}" ; then
+                setenv bootargs "$bootargs root=/dev/sda$bootpart" ;
+        elif itest 0 -eq ${disk}; then
+                setenv bootargs "$bootargs root=/dev/mmcblk2p$bootpart" ;
+        else
+                setenv bootargs "$bootargs root=/dev/mmcblk3p$bootpart" ;
+        fi
+fi
+
+if itest.s "x" != "x${disable_giga}" ; then
+	setenv bootargs $bootargs fec.disable_giga=1
+fi
+
+if itest.s "x" != "x$wlmac" ; then
+	setenv bootargs $bootargs wlcore.mac=$wlmac
+fi
+
+if itest.s "x" != "x$gpumem" ; then
+	setenv bootargs $bootargs galcore.contiguousSize=$gpumem
+fi
+
+if itest.s "x" != "x$show_fdt" ; then
+	fdt print /
+fi
+
+if itest.s "x" != "x$show_env" ; then
+	printenv
+fi
+
+if ${fs}load ${dtype} ${disk}:1 10800000 ${bootdir}uImage ; then
+	bootm 10800000 - $fdt_addr
+fi
+echo "Error loading kernel image"

board/boundarydevices/nitrogen6x/6x_upgrade.txt

@@ -0,0 +1,49 @@
+if itest.s a$bootfile == a; then
+        bootfile=u-boot.imx
+fi
+
+setenv stdout serial,vga
+echo "check U-Boot" ;
+setenv offset 0x400
+if ${fs}load ${dtype} ${disk}:1 12000000 $bootfile || ${fs}load ${dtype} ${disk}:1 12000000 u-boot.nopadding ; then
+      echo "read $filesize bytes from SD card" ;
+      if sf probe || sf probe || \
+	 sf probe 1 27000000 || sf probe 1 27000000 ; then
+	   echo "probed SPI ROM" ;
+	   if sf read 0x12400000 $offset $filesize ; then
+	       if cmp.b 0x12000000 0x12400000 $filesize ; then
+		   echo "------- U-Boot versions match" ;
+	       else
+		   echo "Need U-Boot upgrade" ;
+		   echo "Program in 5 seconds" ;
+		   for n in 5 4 3 2 1 ; do
+			echo $n ;
+			sleep 1 ;
+		   done
+		   echo "erasing" ;
+		   sf erase 0 0xC0000 ;
+		   # two steps to prevent bricking
+		   echo "programming" ;
+		   sf write 0x12000000 $offset $filesize ;
+		   echo "verifying" ;
+		   if sf read 0x12400000 $offset $filesize ; then
+		       if cmp.b 0x12000000 0x12400000 $filesize ; then
+			   while echo "---- U-Boot upgraded. reset" ; do
+				sleep 120
+			   done
+		       else
+			   echo "Read verification error" ;
+		       fi
+		   else
+			echo "Error re-reading EEPROM" ;
+		   fi
+	       fi
+	   else
+	       echo "Error reading boot loader from EEPROM" ;
+	   fi
+      else
+	   echo "Error initializing EEPROM" ;
+      fi ;
+else
+     echo "No U-Boot image found on SD card" ;
+fi

board/boundarydevices/nitrogen6x/readme.txt

@@ -0,0 +1,13 @@
+Buildroot for Boundary Devices Nitrogen6X:
+
+http://boundarydevices.com/products/nitrogen6x-board-imx6-arm-cortex-a9-sbc/
+
+To install, simply write rootfs.ext2 to the first partition of a uSD card:
+
+sudo dd if=output/images/rootfs.ext2 of=/dev/sdX1
+
+Where 'sdX1' is the device node of the uSD partition.
+
+To upgrade u-boot, cancel autoboot and type:
+
+run upgradeu

board/calao/qil-a9260/at91bootstrap-1.16-qil-a9260.patch

@@ -0,0 +1,603 @@
+From a3e08beea8bf5e96e1237eef4a82f4a2fdd5286b Mon Sep 17 00:00:00 2001
+From: Gregory Hermant <gregory.hermant@calao-systems.com>
+Date: Thu, 19 Jul 2012 14:19:59 +0200
+Subject: [PATCH] Add support for the Calao-systems QIL-A9260
+
+
+Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
+---
+ board/qil_a9260/nandflash/Makefile    |  122 ++++++++++++++
+ board/qil_a9260/nandflash/qil-a9260.h |  109 ++++++++++++
+ board/qil_a9260/qil_a9260.c           |  298 +++++++++++++++++++++++++++++++++
+ crt0_gnu.S                            |    7 +
+ include/part.h                        |    6 +-
+ 5 files changed, 541 insertions(+), 1 deletions(-)
+ create mode 100644 board/qil_a9260/nandflash/Makefile
+ create mode 100644 board/qil_a9260/nandflash/qil-a9260.h
+ create mode 100644 board/qil_a9260/qil_a9260.c
+
+diff --git a/board/qil_a9260/nandflash/Makefile b/board/qil_a9260/nandflash/Makefile
+new file mode 100644
+index 0000000..209a25f
+--- /dev/null
++++ b/board/qil_a9260/nandflash/Makefile
+@@ -0,0 +1,122 @@
++# TODO: set this appropriately for your local toolchain
++ifndef ERASE_FCT
++ERASE_FCT=rm -f
++endif
++ifndef CROSS_COMPILE
++CROSS_COMPILE=arm-elf-
++endif
++
++TOOLCHAIN=gcc
++
++BOOTSTRAP_PATH=../../..
++
++# NandFlashBoot Configuration for QIL-A9260
++
++# Target name (case sensitive!!!)
++TARGET=AT91SAM9260
++# Board name (case sensitive!!!)
++BOARD=qil_a9260
++# Link Address and Top_of_Memory
++LINK_ADDR=0x200000
++TOP_OF_MEMORY=0x301000
++# Name of current directory
++PROJECT=nandflash
++
++ifndef BOOT_NAME
++BOOT_NAME=$(PROJECT)_$(BOARD)
++endif
++
++INCL=./$(BOOTSTRAP_PATH)/board/$(BOARD)/$(PROJECT)
++
++ifeq ($(TOOLCHAIN), gcc)
++
++AS=$(CROSS_COMPILE)gcc
++CC=$(CROSS_COMPILE)gcc
++LD=$(CROSS_COMPILE)gcc
++NM= $(CROSS_COMPILE)nm
++SIZE=$(CROSS_COMPILE)size
++OBJCOPY=$(CROSS_COMPILE)objcopy
++OBJDUMP=$(CROSS_COMPILE)objdump
++CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL)
++ASFLAGS=-g -mcpu=arm926ej-s -c -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
++
++# Linker flags.
++#  -Wl,...:     tell GCC to pass this to linker.
++#    -Map:      create map file
++#    --cref:    add cross reference to map file
++LDFLAGS+=-nostartfiles -nostdlib -Wl,-Map=$(BOOT_NAME).map,--cref
++LDFLAGS+=-T $(BOOTSTRAP_PATH)/elf32-littlearm.lds -Ttext $(LINK_ADDR)
++OBJS=crt0_gnu.o
++
++endif
++
++OBJS+=\
++	$(BOARD).o \
++	main.o \
++	gpio.o \
++	pmc.o \
++	debug.o \
++	sdramc.o \
++	nandflash.o \
++	_udivsi3.o \
++	_umodsi3.o \
++	div0.o \
++	udiv.o \
++	string.o
++
++
++rebuild: clean all
++
++all: 	$(BOOT_NAME)
++
++ifeq ($(TOOLCHAIN), gcc)
++$(BOOT_NAME): $(OBJS)
++	$(LD) $(LDFLAGS) -n -o $(BOOT_NAME).elf $(OBJS)
++	$(OBJCOPY) --strip-debug --strip-unneeded $(BOOT_NAME).elf -O binary $(BOOT_NAME).bin
++endif
++
++
++$(BOARD).o: $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c -o $(BOARD).o
++
++main.o: $(BOOTSTRAP_PATH)/main.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/main.c -o main.o
++
++gpio.o: $(BOOTSTRAP_PATH)/driver/gpio.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/gpio.c -o gpio.o
++
++pmc.o:  $(BOOTSTRAP_PATH)/driver/pmc.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/pmc.c -o pmc.o
++
++debug.o: $(BOOTSTRAP_PATH)/driver/debug.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/debug.c -o debug.o
++
++sdramc.o:  $(BOOTSTRAP_PATH)/driver/sdramc.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/sdramc.c -o sdramc.o
++
++dataflash.o:  $(BOOTSTRAP_PATH)/driver/dataflash.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/dataflash.c -o dataflash.o
++
++nandflash.o:  $(BOOTSTRAP_PATH)/driver/nandflash.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/nandflash.c -o nandflash.o
++
++crt0_gnu.o:  $(BOOTSTRAP_PATH)/crt0_gnu.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/crt0_gnu.S -o crt0_gnu.o
++
++div0.o:  $(BOOTSTRAP_PATH)/lib/div0.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/div0.c -o div0.o
++
++string.o:  $(BOOTSTRAP_PATH)/lib/string.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/string.c -o string.o
++
++udiv.o:  $(BOOTSTRAP_PATH)/lib/udiv.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/udiv.c -o udiv.o
++
++_udivsi3.o:  $(BOOTSTRAP_PATH)/lib/_udivsi3.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_udivsi3.S -o _udivsi3.o
++
++_umodsi3.o:  $(BOOTSTRAP_PATH)/lib/_umodsi3.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_umodsi3.S -o _umodsi3.o
++
++clean:
++	$(ERASE_FCT) *.o *.bin *.elf *.map
+diff --git a/board/qil_a9260/nandflash/qil-a9260.h b/board/qil_a9260/nandflash/qil-a9260.h
+new file mode 100644
+index 0000000..c87002e
+--- /dev/null
++++ b/board/qil_a9260/nandflash/qil-a9260.h
+@@ -0,0 +1,109 @@
++/* ----------------------------------------------------------------------------
++ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
++ * ----------------------------------------------------------------------------
++ * Copyright (c) 2006, Atmel Corporation
++
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ *
++ * - Redistributions of source code must retain the above copyright notice,
++ * this list of conditions and the disclaimer below.
++ *
++ * Atmel's name may not be used to endorse or promote products derived from
++ * this software without specific prior written permission.
++ *
++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ----------------------------------------------------------------------------
++ * File Name           : qil-a9260.h
++ * Object              :
++ * Creation            : GH July 19th 2012
++ *-----------------------------------------------------------------------------
++ */
++#ifndef _QIL_A9260_H
++#define _QIL_A9260_H
++
++/* ******************************************************************* */
++/* PMC Settings                                                        */
++/*                                                                     */
++/* The main oscillator is enabled as soon as possible in the c_startup */
++/* and MCK is switched on the main oscillator.                         */
++/* PLL initialization is done later in the hw_init() function          */
++/* ******************************************************************* */
++#define MASTER_CLOCK		(180000000/2)
++#define PLL_LOCK_TIMEOUT	1000000
++
++#define PLLA_SETTINGS	0x20593F06
++#define PLLB_SETTINGS	0x10483F0E
++
++/* Switch MCK on PLLA output PCK = PLLA = 2 * MCK */
++#define MCKR_SETTINGS		(AT91C_PMC_PRES_CLK | AT91C_PMC_MDIV_2)
++#define MCKR_CSS_SETTINGS	(AT91C_PMC_CSS_PLLA_CLK | MCKR_SETTINGS)
++
++/* ******************************************************************* */
++/* NandFlash Settings                                                  */
++/*                                                                     */
++/* ******************************************************************* */
++#define AT91C_SMARTMEDIA_BASE	0x40000000
++
++#define AT91_SMART_MEDIA_ALE    (1 << 21)	/* our ALE is AD21 */
++#define AT91_SMART_MEDIA_CLE    (1 << 22)	/* our CLE is AD22 */
++
++#define NAND_DISABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_SODR = AT91C_PIO_PC14;} while(0)
++#define NAND_ENABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_CODR = AT91C_PIO_PC14;} while(0)
++
++#define NAND_WAIT_READY() while (!(*(volatile unsigned int *)AT91C_PIOC_PDSR & AT91C_PIO_PC13))
++
++
++/* ******************************************************************** */
++/* SMC Chip Select 3 Timings for NandFlash for MASTER_CLOCK = 90000000.*/
++/* Please refer to SMC section in AT91SAM datasheet to learn how 	*/
++/* to generate these values. 						*/
++/* ******************************************************************** */
++#define AT91C_SM_NWE_SETUP	(1 << 0)
++#define AT91C_SM_NCS_WR_SETUP	(0 << 8)
++#define AT91C_SM_NRD_SETUP	(1 << 16)
++#define AT91C_SM_NCS_RD_SETUP	(0 << 24)
++  
++#define AT91C_SM_NWE_PULSE 	(3 << 0)
++#define AT91C_SM_NCS_WR_PULSE	(3 << 8)
++#define AT91C_SM_NRD_PULSE	(3 << 16)
++#define AT91C_SM_NCS_RD_PULSE	(3 << 24)
++  
++#define AT91C_SM_NWE_CYCLE 	(5 << 0)
++#define AT91C_SM_NRD_CYCLE	(5 << 16)
++#define AT91C_SM_TDF	        (2 << 16)
++
++/* ******************************************************************* */
++/* BootStrap Settings                                                  */
++/*                                                                     */
++/* ******************************************************************* */
++#define IMG_ADDRESS 		0x20000		/* Image Address in NandFlash */
++#define	IMG_SIZE		0x40000		/* Image Size in NandFlash    */
++
++#define MACH_TYPE       	0x6AF		/* QIL-A9260 */
++#define JUMP_ADDR		0x23F00000	/* Final Jump Address 	      */
++
++/* ******************************************************************* */
++/* Application Settings                                                */
++/* ******************************************************************* */
++#undef CFG_DEBUG
++#undef CFG_DATAFLASH
++
++#define CFG_NANDFLASH
++#undef	NANDFLASH_SMALL_BLOCKS	/* NANDFLASH_LARGE_BLOCKS used instead */
++
++#define CFG_HW_INIT
++#define CFG_SDRAM
++
++#endif	/* _QIL_A9260_H */
+diff --git a/board/qil_a9260/qil_a9260.c b/board/qil_a9260/qil_a9260.c
+new file mode 100644
+index 0000000..ae122e7
+--- /dev/null
++++ b/board/qil_a9260/qil_a9260.c
+@@ -0,0 +1,298 @@
++/* ----------------------------------------------------------------------------
++ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
++ * ----------------------------------------------------------------------------
++ * Copyright (c) 2006, Atmel Corporation
++
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ *
++ * - Redistributions of source code must retain the above copyright notice,
++ * this list of conditions and the disclaiimer below.
++ *
++ * Atmel's name may not be used to endorse or promote products derived from
++ * this software without specific prior written permission.
++ *
++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ----------------------------------------------------------------------------
++ * File Name           : qil_a9260.c
++ * Object              :
++ * Creation            : GH July 19th 2012
++ *-----------------------------------------------------------------------------
++ */
++#include "../../include/part.h"
++#include "../../include/gpio.h"
++#include "../../include/pmc.h"
++#include "../../include/debug.h"
++#include "../../include/sdramc.h"
++#include "../../include/main.h"
++#ifdef CFG_NANDFLASH
++#include "../../include/nandflash.h"
++#endif
++#ifdef CFG_DATAFLASH
++#include "../../include/dataflash.h"
++#endif
++
++static inline unsigned int get_cp15(void)
++{
++	unsigned int value;
++	__asm__("mrc p15, 0, %0, c1, c0, 0" : "=r" (value));
++	return value;
++}
++
++static inline void set_cp15(unsigned int value)
++{
++	__asm__("mcr p15, 0, %0, c1, c0, 0" : : "r" (value));
++}
++
++#ifdef CFG_HW_INIT
++/*----------------------------------------------------------------------------*/
++/* \fn    hw_init							      */
++/* \brief This function performs very low level HW initialization	      */
++/* This function is invoked as soon as possible during the c_startup	      */
++/* The bss segment must be initialized					      */
++/*----------------------------------------------------------------------------*/
++void hw_init(void)
++{
++	unsigned int cp15;
++	
++	/* Configure PIOs */
++	const struct pio_desc hw_pio[] = {
++#ifdef CFG_DEBUG
++		{"RXD", AT91C_PIN_PB(14), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"TXD", AT91C_PIN_PB(15), 0, PIO_DEFAULT, PIO_PERIPH_A},
++#endif
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Disable watchdog */
++	writel(AT91C_WDTC_WDDIS, AT91C_BASE_WDTC + WDTC_WDMR);
++
++	/* At this stage the main oscillator is supposed to be enabled
++	 * PCK = MCK = MOSC */
++
++	/* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */
++	pmc_cfg_plla(PLLA_SETTINGS, PLL_LOCK_TIMEOUT);
++
++	/* PCK = PLLA = 2 * MCK */
++	pmc_cfg_mck(MCKR_SETTINGS, PLL_LOCK_TIMEOUT);
++	/* Switch MCK on PLLA output */
++	pmc_cfg_mck(MCKR_CSS_SETTINGS, PLL_LOCK_TIMEOUT);
++
++	/* Configure PLLB */
++	pmc_cfg_pllb(PLLB_SETTINGS, PLL_LOCK_TIMEOUT);
++
++	/* Configure CP15 */
++	cp15 = get_cp15();
++	cp15 |= I_CACHE;
++	set_cp15(cp15);
++
++	/* Configure the PIO controller */
++	pio_setup(hw_pio);
++
++	/* Configure the EBI Slave Slot Cycle to 64 */
++	writel( (readl((AT91C_BASE_MATRIX + MATRIX_SCFG3)) & ~0xFF) | 0x40, (AT91C_BASE_MATRIX + MATRIX_SCFG3));
++
++#ifdef CFG_DEBUG
++	/* Enable Debug messages on the DBGU */
++	dbg_init(BAUDRATE(MASTER_CLOCK, 115200));
++
++	dbg_print("Start AT91Bootstrap...\n\r");
++#endif /* CFG_DEBUG */
++
++#ifdef CFG_SDRAM
++	/* Initialize the matrix */
++	writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) | AT91C_EBI_CS1A_SDRAMC, AT91C_BASE_CCFG + CCFG_EBICSA);
++
++	/* Configure SDRAM Controller */
++	sdram_init(	AT91C_SDRAMC_NC_9  |
++				AT91C_SDRAMC_NR_13 |
++				AT91C_SDRAMC_CAS_2 |
++				AT91C_SDRAMC_NB_4_BANKS |
++				AT91C_SDRAMC_DBW_32_BITS |
++				AT91C_SDRAMC_TWR_2 |
++				AT91C_SDRAMC_TRC_7 |
++				AT91C_SDRAMC_TRP_2 |
++				AT91C_SDRAMC_TRCD_2 |
++				AT91C_SDRAMC_TRAS_5 |
++				AT91C_SDRAMC_TXSR_8,		/* Control Register */
++				(MASTER_CLOCK * 7)/1000000,	/* Refresh Timer Register */
++				AT91C_SDRAMC_MD_SDRAM);		/* SDRAM (no low power)   */ 
++
++
++#endif /* CFG_SDRAM */
++}
++#endif /* CFG_HW_INIT */
++
++#ifdef CFG_SDRAM
++/*------------------------------------------------------------------------------*/
++/* \fn    sdramc_hw_init							*/
++/* \brief This function performs SDRAMC HW initialization			*/
++/*------------------------------------------------------------------------------*/
++void sdramc_hw_init(void)
++{
++	/* Configure PIOs */
++/*	const struct pio_desc sdramc_pio[] = {
++		{"D16", AT91C_PIN_PC(16), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D17", AT91C_PIN_PC(17), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D18", AT91C_PIN_PC(18), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D19", AT91C_PIN_PC(19), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D20", AT91C_PIN_PC(20), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D21", AT91C_PIN_PC(21), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D22", AT91C_PIN_PC(22), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D23", AT91C_PIN_PC(23), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D24", AT91C_PIN_PC(24), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D25", AT91C_PIN_PC(25), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D26", AT91C_PIN_PC(26), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D27", AT91C_PIN_PC(27), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D28", AT91C_PIN_PC(28), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D29", AT91C_PIN_PC(29), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D30", AT91C_PIN_PC(30), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D31", AT91C_PIN_PC(31), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++*/
++	/* Configure the SDRAMC PIO controller to output PCK0 */
++/*	pio_setup(sdramc_pio); */
++
++	writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_ASR(0));
++	writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_PDR(0));
++
++}
++#endif /* CFG_SDRAM */
++
++#ifdef CFG_DATAFLASH
++
++/*------------------------------------------------------------------------------*/
++/* \fn    df_recovery								*/
++/* \brief This function erases DataFlash Page 0 if USR PB is pressed 		*/
++/*        during boot sequence							*/
++/*------------------------------------------------------------------------------*/
++void df_recovery(AT91PS_DF pDf)
++{
++#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS0_DATAFLASH)
++	/* Configure PIOs */
++	const struct pio_desc usrpb_pio[] = {
++		{"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the PIO controller */
++	writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
++	pio_setup(usrpb_pio);
++	
++	/* If USR PB is pressed during Boot sequence */
++	/* Erase DataFlash Page 0*/
++	if ( !pio_get_value(AT91C_PIN_PB(10)) )
++		df_page_erase(pDf, 0);
++#endif
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    df_hw_init								*/
++/* \brief This function performs DataFlash HW initialization			*/
++/*------------------------------------------------------------------------------*/
++void df_hw_init(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc df_pio[] = {
++		{"MISO",  AT91C_PIN_PA(0), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"MOSI",  AT91C_PIN_PA(1), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"SPCK",  AT91C_PIN_PA(2), 0, PIO_DEFAULT, PIO_PERIPH_A},
++#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS0_DATAFLASH)
++		{"NPCS0", AT91C_PIN_PA(3), 0, PIO_DEFAULT, PIO_PERIPH_A},
++#endif
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the PIO controller */
++	pio_setup(df_pio);
++}
++#endif /* CFG_DATAFLASH */
++
++
++
++#ifdef CFG_NANDFLASH
++/*------------------------------------------------------------------------------*/
++/* \fn    nand_recovery						*/
++/* \brief This function erases NandFlash Block 0 if USR PB is pressed 		*/
++/*        during boot sequence							*/
++/*------------------------------------------------------------------------------*/
++static void nand_recovery(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc usrpb_pio[] = {
++		{"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the PIO controller */
++	writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
++	pio_setup(usrpb_pio);
++	
++	/* If USR PB is pressed during Boot sequence */
++	/* Erase NandFlash block 0*/
++	if (!pio_get_value(AT91C_PIN_PB(10)) )
++		AT91F_NandEraseBlock0();
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_hw_init							*/
++/* \brief NandFlash HW init							*/
++/*------------------------------------------------------------------------------*/
++void nandflash_hw_init(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc nand_pio[] = {
++		{"RDY_BSY", AT91C_PIN_PC(13), 0, PIO_PULLUP, PIO_INPUT},
++		{"NANDCS",  AT91C_PIN_PC(14), 0, PIO_PULLUP, PIO_OUTPUT},
++		{(char *) 0, 0, 0,  PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Setup Smart Media, first enable the address range of CS3 in HMATRIX user interface */
++	writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) | AT91C_EBI_CS3A_SM, AT91C_BASE_CCFG + CCFG_EBICSA);
++		    
++	/* Configure SMC CS3 */
++ 	writel((AT91C_SM_NWE_SETUP | AT91C_SM_NCS_WR_SETUP | AT91C_SM_NRD_SETUP | AT91C_SM_NCS_RD_SETUP), AT91C_BASE_SMC + SMC_SETUP3);
++  	writel((AT91C_SM_NWE_PULSE | AT91C_SM_NCS_WR_PULSE | AT91C_SM_NRD_PULSE | AT91C_SM_NCS_RD_PULSE), AT91C_BASE_SMC + SMC_PULSE3);
++	writel((AT91C_SM_NWE_CYCLE | AT91C_SM_NRD_CYCLE)						, AT91C_BASE_SMC + SMC_CYCLE3);
++	writel((AT91C_SMC_READMODE | AT91C_SMC_WRITEMODE | AT91C_SMC_NWAITM_NWAIT_DISABLE | 
++  		AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS | AT91C_SM_TDF)						, AT91C_BASE_SMC + SMC_CTRL3);
++
++	/* Configure the PIO controller */
++	writel((1 << AT91C_ID_PIOC), PMC_PCER + AT91C_BASE_PMC);
++	pio_setup(nand_pio);
++	
++	nand_recovery();
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_cfg_16bits_dbw_init						*/
++/* \brief Configure SMC in 16 bits mode						*/
++/*------------------------------------------------------------------------------*/
++void nandflash_cfg_16bits_dbw_init(void)
++{
++	writel(readl(AT91C_BASE_SMC + SMC_CTRL3) | AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS, AT91C_BASE_SMC + SMC_CTRL3);
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_cfg_8bits_dbw_init						*/
++/* \brief Configure SMC in 8 bits mode						*/
++/*------------------------------------------------------------------------------*/
++void nandflash_cfg_8bits_dbw_init(void)
++{
++	writel((readl(AT91C_BASE_SMC + SMC_CTRL3) & ~(AT91C_SMC_DBW)) | AT91C_SMC_DBW_WIDTH_EIGTH_BITS, AT91C_BASE_SMC + SMC_CTRL3);
++}
++
++
++#endif /* #ifdef CFG_NANDFLASH */
+diff --git a/crt0_gnu.S b/crt0_gnu.S
+index 042b617..002feef 100644
+--- a/crt0_gnu.S
++++ b/crt0_gnu.S
+@@ -106,6 +106,13 @@ _relocate_to_sram:
+ #endif /* CFG_NORFLASH */
+ 
+ _setup_clocks:
++/* Test if main osc is bypassed */
++	ldr 	r0,=AT91C_PMC_MOR
++	ldr 	r1, [r0]
++	ldr 	r2,=AT91C_CKGR_OSCBYPASS 
++	ands 	r1, r1, r2
++	bne	_init_data	/* branch if OSCBYPASS=1 */
++
+ /* Test if main oscillator is enabled */
+ 	ldr 	r0,=AT91C_PMC_SR
+ 	ldr 	r1, [r0]
+diff --git a/include/part.h b/include/part.h
+index ba5985a..bbd33fe 100644
+--- a/include/part.h
++++ b/include/part.h
+@@ -35,7 +35,11 @@
+ 
+ #ifdef AT91SAM9260
+ #include "AT91SAM9260_inc.h"
+-#include "at91sam9260ek.h"
++	#ifdef at91sam9260ek
++	#include "at91sam9260ek.h"
++	#elif qil_a9260
++	#include "qil-a9260.h"
++	#endif
+ #endif
+ 
+ #ifdef AT91SAM9XE
+-- 
+1.5.6.3
+

board/calao/qil-a9260/barebox-2012.07.0-qil-a9260.patch

@@ -0,0 +1,36 @@
+From d076aa6182dc6df6bb311e60bbddb03573b9483b Mon Sep 17 00:00:00 2001
+From: Gregory Hermant <gregory.hermant@calao-systems.com>
+Date: Fri, 3 Aug 2012 11:25:49 +0200
+Subject: [PATCH] Enable pull-up on Rx serial ports for the CALAO MB-QIL-A9260
+
+
+Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
+---
+ arch/arm/boards/qil-a9260/init.c |    6 ++++++
+ 1 files changed, 6 insertions(+), 0 deletions(-)
+
+diff --git a/arch/arm/boards/qil-a9260/init.c b/arch/arm/boards/qil-a9260/init.c
+index 305d733..b43cace 100644
+--- a/arch/arm/boards/qil-a9260/init.c
++++ b/arch/arm/boards/qil-a9260/init.c
+@@ -196,11 +196,17 @@ device_initcall(qil_a9260_devices_init);
+ static int qil_a9260_console_init(void)
+ {
+ 	at91_register_uart(0, 0);
++	at91_set_A_periph(AT91_PIN_PB14, 1);    /* Enable pull-up on DRXD */
++
+ 	at91_register_uart(1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ 			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ 			   | ATMEL_UART_RI);
++
+ 	at91_register_uart(2, ATMEL_UART_CTS | ATMEL_UART_RTS);
++	at91_set_A_periph(AT91_PIN_PB7, 1);	/* Enable pull-up on RXD1 */
++
+ 	at91_register_uart(3, ATMEL_UART_CTS | ATMEL_UART_RTS);
++	at91_set_A_periph(AT91_PIN_PB9, 1);	/* Enable pull-up on RXD2 */
+ 
+ 	return 0;
+ }
+-- 
+1.5.6.3
+

board/calao/qil-a9260/linux-3.4.7.config

@@ -0,0 +1,111 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_AT91=y
+CONFIG_ARCH_AT91SAM9260=y
+CONFIG_MACH_QIL_A9260=y
+CONFIG_AT91_SLOW_CLOCK=y
+CONFIG_AT91_EARLY_USART0=y
+# CONFIG_ARM_THUMB is not set
+CONFIG_AEABI=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS1,115200"
+CONFIG_FPE_NWFPE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_SPI=y
+CONFIG_SPI_ATMEL=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+# CONFIG_USB_HID is not set
+CONFIG_USB=y
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_MON=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=m
+CONFIG_MMC=y
+CONFIG_MMC_AT91=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_M41T94=y
+CONFIG_EXT2_FS=y
+CONFIG_FUSE_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_XATTR=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_LL=y

board/calao/qil-a9260/linux-3.4.7.patch

@@ -0,0 +1,27 @@
+From fe6432a9728b62bce3db73c5a4efe026018fd495 Mon Sep 17 00:00:00 2001
+From: Gregory Hermant <gregory.hermant@calao-systems.com>
+Date: Fri, 3 Aug 2012 16:45:37 +0200
+Subject: [PATCH] QIL-A9260: rtc modalias m41t48 renamed to rtc-m41t48
+
+
+Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
+---
+ arch/arm/mach-at91/board-qil-a9260.c |    2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
+index bf351e2..c0df05c 100644
+--- a/arch/arm/mach-at91/board-qil-a9260.c
++++ b/arch/arm/mach-at91/board-qil-a9260.c
+@@ -78,7 +78,7 @@ static struct at91_udc_data __initdata ek_udc_data = {
+ static struct spi_board_info ek_spi_devices[] = {
+ #if defined(CONFIG_RTC_DRV_M41T94)
+ 	{	/* M41T94 RTC */
+-		.modalias	= "m41t94",
++		.modalias	= "rtc-m41t94",
+ 		.chip_select	= 0,
+ 		.max_speed_hz	= 1 * 1000 * 1000,
+ 		.bus_num	= 0,
+-- 
+1.5.6.3
+

board/calao/snowball/linux-3.4.patch

@@ -0,0 +1,45 @@
+From 3d1a9b44b9dcd2c0f5d54c09596c96c0524d8340 Mon Sep 17 00:00:00 2001
+From: Gregory Hermant <gregory.hermant@calao-systems.com>
+Date: Tue, 13 Nov 2012 11:47:41 +0100
+Subject: [PATCH] trace-debug[stm]: Fix for BT/WLAN instability
+
+Pins under mop500_ske_pins array are used for different
+functionalities in snowball. Ex: GPIO161 pin configured
+for keypad here must stay configured as GPIO alternate
+function for operating PMU_EN pin of BT/WLAN chip in snowball.
+So forbid configuring these pins, for snowball
+
+Signed-off-by: Rajanikanth H.V <rajanikanth.hv@stericsson.com>
+Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
+---
+ arch/arm/mach-ux500/board-mop500-stm.c |    7 +++++--
+ 1 file changed, 5 insertions(+), 2 deletions(-)
+
+diff --git a/arch/arm/mach-ux500/board-mop500-stm.c b/arch/arm/mach-ux500/board-mop500-stm.c
+index 1bef2a0..532fb9e 100644
+--- a/arch/arm/mach-ux500/board-mop500-stm.c
++++ b/arch/arm/mach-ux500/board-mop500-stm.c
+@@ -121,7 +121,9 @@ static int stm_ste_disable_ape_on_mipi60(void)
+ 	if (retval)
+ 		STM_ERR("Failed to disable MIPI60\n");
+ 	else {
+-		retval = nmk_config_pins(ARRAY_AND_SIZE(mop500_ske_pins));
++		if (!machine_is_snowball())
++			retval = nmk_config_pins(
++				ARRAY_AND_SIZE(mop500_ske_pins));
+ 		if (retval)
+ 			STM_ERR("Failed to enable SKE gpio\n");
+ 	}
+@@ -314,7 +316,8 @@ static int stm_ste_connection(enum stm_connection_type con_type)
+ 		/* Enable altC3 on GPIO70-74 (STMMOD) and GPIO75-76 (UARTMOD) */
+ 		prcmu_enable_stm_mod_uart();
+ 		/* Enable APE on MIPI60 */
+-		retval = nmk_config_pins_sleep(ARRAY_AND_SIZE(mop500_ske_pins));
++		if (!machine_is_snowball())
++			retval = nmk_config_pins_sleep(ARRAY_AND_SIZE(mop500_ske_pins));
+ 		if (retval)
+ 			STM_ERR("Failed to disable SKE GPIO\n");
+ 		else {
+-- 
+1.7.9.5
+

board/calao/tny-a9g20-lpw/at91bootstrap-1.16-tny-a9g20-lpw.patch

@@ -0,0 +1,551 @@
+From 53bd82b122f4530a98cba45795832820bb1d0b45 Mon Sep 17 00:00:00 2001
+From: Gregory Hermant <gregory.hermant@calao-systems.com>
+Date: Mon, 13 Aug 2012 11:26:10 +0200
+Subject: [PATCH] Add support for the Calao-systems TNY-A9G20-LPW
+
+
+Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
+---
+ board/tny_a9g20_lpw/nandflash/Makefile        |  121 ++++++++++++
+ board/tny_a9g20_lpw/nandflash/tny-a9g20-lpw.h |  114 ++++++++++++
+ board/tny_a9g20_lpw/tny_a9g20_lpw.c           |  243 +++++++++++++++++++++++++
+ crt0_gnu.S                                    |    6 +
+ include/part.h                                |    6 +-
+ 5 files changed, 489 insertions(+), 1 deletion(-)
+ create mode 100644 board/tny_a9g20_lpw/nandflash/Makefile
+ create mode 100644 board/tny_a9g20_lpw/nandflash/tny-a9g20-lpw.h
+ create mode 100644 board/tny_a9g20_lpw/tny_a9g20_lpw.c
+
+diff --git a/board/tny_a9g20_lpw/nandflash/Makefile b/board/tny_a9g20_lpw/nandflash/Makefile
+new file mode 100644
+index 0000000..7efbea7
+--- /dev/null
++++ b/board/tny_a9g20_lpw/nandflash/Makefile
+@@ -0,0 +1,121 @@
++# TODO: set this appropriately for your local toolchain
++ifndef ERASE_FCT
++ERASE_FCT=rm -f
++endif
++ifndef CROSS_COMPILE
++CROSS_COMPILE=arm-elf-
++endif
++
++TOOLCHAIN=gcc
++
++BOOTSTRAP_PATH=../../..
++
++# NandFlashBoot Configuration for AT91SAM9260EK
++
++# Target name (case sensitive!!!)
++TARGET=AT91SAM9G20
++# Board name (case sensitive!!!)
++BOARD=tny_a9g20_lpw
++# Link Address and Top_of_Memory
++LINK_ADDR=0x200000
++TOP_OF_MEMORY=0x301000
++# Name of current directory
++PROJECT=nandflash
++
++ifndef BOOT_NAME
++BOOT_NAME=$(PROJECT)_$(BOARD)
++endif
++
++INCL=./$(BOOTSTRAP_PATH)/board/$(BOARD)/$(PROJECT)
++
++ifeq ($(TOOLCHAIN), gcc)
++
++AS=$(CROSS_COMPILE)gcc
++CC=$(CROSS_COMPILE)gcc
++LD=$(CROSS_COMPILE)gcc
++NM= $(CROSS_COMPILE)nm
++SIZE=$(CROSS_COMPILE)size
++OBJCOPY=$(CROSS_COMPILE)objcopy
++OBJDUMP=$(CROSS_COMPILE)objdump
++CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL)
++ASFLAGS=-g -mcpu=arm926ej-s -c -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
++
++# Linker flags.
++#  -Wl,...:     tell GCC to pass this to linker.
++#    -Map:      create map file
++#    --cref:    add cross reference to map file
++LDFLAGS+=-nostartfiles -nostdlib -Wl,-Map=$(BOOT_NAME).map,--cref
++LDFLAGS+=-T $(BOOTSTRAP_PATH)/elf32-littlearm.lds -Ttext $(LINK_ADDR)
++OBJS=crt0_gnu.o
++
++endif
++
++OBJS+=\
++	$(BOARD).o \
++	main.o \
++	gpio.o \
++	pmc.o \
++	debug.o \
++	sdramc.o \
++	nandflash.o \
++	_udivsi3.o \
++	_umodsi3.o \
++	div0.o \
++	udiv.o \
++	string.o
++
++rebuild: clean all
++
++all: 	$(BOOT_NAME)
++
++ifeq ($(TOOLCHAIN), gcc)
++$(BOOT_NAME): $(OBJS)
++	$(LD) $(LDFLAGS) -n -o $(BOOT_NAME).elf $(OBJS)
++	$(OBJCOPY) --strip-debug --strip-unneeded $(BOOT_NAME).elf -O binary $(BOOT_NAME).bin
++endif
++
++
++$(BOARD).o: $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c -o $(BOARD).o
++
++main.o: $(BOOTSTRAP_PATH)/main.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/main.c -o main.o
++
++gpio.o: $(BOOTSTRAP_PATH)/driver/gpio.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/gpio.c -o gpio.o
++
++pmc.o:  $(BOOTSTRAP_PATH)/driver/pmc.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/pmc.c -o pmc.o
++
++debug.o: $(BOOTSTRAP_PATH)/driver/debug.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/debug.c -o debug.o
++
++sdramc.o:  $(BOOTSTRAP_PATH)/driver/sdramc.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/sdramc.c -o sdramc.o
++
++dataflash.o:  $(BOOTSTRAP_PATH)/driver/dataflash.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/dataflash.c -o dataflash.o
++
++nandflash.o:  $(BOOTSTRAP_PATH)/driver/nandflash.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/nandflash.c -o nandflash.o
++
++crt0_gnu.o:  $(BOOTSTRAP_PATH)/crt0_gnu.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/crt0_gnu.S -o crt0_gnu.o
++
++div0.o:  $(BOOTSTRAP_PATH)/lib/div0.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/div0.c -o div0.o
++
++string.o:  $(BOOTSTRAP_PATH)/lib/string.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/string.c -o string.o
++
++udiv.o:  $(BOOTSTRAP_PATH)/lib/udiv.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/udiv.c -o udiv.o
++
++_udivsi3.o:  $(BOOTSTRAP_PATH)/lib/_udivsi3.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_udivsi3.S -o _udivsi3.o
++
++_umodsi3.o:  $(BOOTSTRAP_PATH)/lib/_umodsi3.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_umodsi3.S -o _umodsi3.o
++
++clean:
++	$(ERASE_FCT) *.o *.bin *.elf *.map
+diff --git a/board/tny_a9g20_lpw/nandflash/tny-a9g20-lpw.h b/board/tny_a9g20_lpw/nandflash/tny-a9g20-lpw.h
+new file mode 100644
+index 0000000..b1f8a1d
+--- /dev/null
++++ b/board/tny_a9g20_lpw/nandflash/tny-a9g20-lpw.h
+@@ -0,0 +1,114 @@
++/* ----------------------------------------------------------------------------
++ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
++ * ----------------------------------------------------------------------------
++ * Copyright (c) 2008, Atmel Corporation
++
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ *
++ * - Redistributions of source code must retain the above copyright notice,
++ * this list of conditions and the disclaimer below.
++ *
++ * Atmel's name may not be used to endorse or promote products derived from
++ * this software without specific prior written permission.
++ *
++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ----------------------------------------------------------------------------
++ * File Name           : tny-a9g20-lpw.h
++ * Object              :
++ * Creation            : GH August 13th 2012
++ *-----------------------------------------------------------------------------
++ */
++#ifndef _TNY_A9G20_LPW_H
++#define _TNY_A9G20_LPW_H
++
++/* ******************************************************************* */
++/* PMC Settings                                                        */
++/*                                                                     */
++/* The main oscillator is enabled as soon as possible in the c_startup */
++/* and MCK is switched on the main oscillator.                         */
++/* PLL initialization is done later in the hw_init() function          */
++/* ******************************************************************* */
++#define MASTER_CLOCK		(100000000)
++#define PLL_LOCK_TIMEOUT	1000000
++
++/* set PLLA to 800Mhz from MAINCK= 12Mhz MULA=199 (0xC7+1= 200), DIVA=0x03 (Fplla=12Mhz x [(199+1)/3]=800Mhz) */
++#define PLLA_SETTINGS   0x20C73F03
++#define PLLB_SETTINGS   0x100F3F02
++
++/* Switch MCK on PLLA output PCK = PLLA/2 = 3 * MCK */
++/* LP-SDRAM (fmax=100Mhz) PDIV=0 => PRESCALER CLK=PCLK; */
++/* MDIV = 2 => PRESCALER CLK / 4 = MCLK=100Mhz */
++/* PRESCALER CLK = PLLA (800Mhz) / 2 (PRES=1) = 400Mhz */
++#define MCKR_SETTINGS           0x0204 
++#define MCKR_CSS_SETTINGS       (AT91C_PMC_CSS_PLLA_CLK | MCKR_SETTINGS)
++
++/* ******************************************************************* */
++/* NandFlash Settings                                                  */
++/*                                                                     */
++/* ******************************************************************* */
++#define AT91C_SMARTMEDIA_BASE	0x40000000
++
++#define AT91_SMART_MEDIA_ALE    (1 << 21)	/* our ALE is AD21 */
++#define AT91_SMART_MEDIA_CLE    (1 << 22)	/* our CLE is AD22 */
++
++#define NAND_DISABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_SODR = AT91C_PIO_PC14;} while(0)
++#define NAND_ENABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_CODR = AT91C_PIO_PC14;} while(0)
++
++#define NAND_WAIT_READY() while (!(*(volatile unsigned int *)AT91C_PIOC_PDSR & AT91C_PIO_PC13))
++
++
++/* ******************************************************************** */
++/* SMC Chip Select 3 Timings for NandFlash for MASTER_CLOCK = 100000000.*/
++/* Please refer to SMC section in AT91SAM9 datasheet to learn how 	*/
++/* to generate these values. 						*/
++/* ******************************************************************** */
++#define AT91C_SM_NWE_SETUP	(1 << 0)
++#define AT91C_SM_NCS_WR_SETUP	(0 << 8)
++#define AT91C_SM_NRD_SETUP	(1 << 16)
++#define AT91C_SM_NCS_RD_SETUP	(0 << 24)
++  
++#define AT91C_SM_NWE_PULSE 	(3 << 0)
++#define AT91C_SM_NCS_WR_PULSE	(3 << 8)
++#define AT91C_SM_NRD_PULSE	(3 << 16)
++#define AT91C_SM_NCS_RD_PULSE	(3 << 24)
++  
++#define AT91C_SM_NWE_CYCLE 	(5 << 0)
++#define AT91C_SM_NRD_CYCLE	(5 << 16)
++
++#define AT91C_SM_TDF	        (2 << 16)
++
++/* ******************************************************************* */
++/* BootStrap Settings                                                  */
++/*                                                                     */
++/* ******************************************************************* */
++#define IMG_ADDRESS 		0x20000			/* Image Address in NandFlash */
++#define	IMG_SIZE		0x40000			/* Image Size in NandFlash */
++
++#define MACH_TYPE		0x80B			/* TNY-A9G20 */
++#define JUMP_ADDR		0x23F00000		/* Final Jump Address */
++
++/* ******************************************************************* */
++/* Application Settings                                                */
++/* ******************************************************************* */
++#undef CFG_DEBUG
++#undef CFG_DATAFLASH
++
++#define CFG_NANDFLASH
++#undef	NANDFLASH_SMALL_BLOCKS	/* NANDFLASH_LARGE_BLOCKS used instead */
++
++#define	CFG_SDRAM
++#define	CFG_HW_INIT
++
++#endif	/* _TNY_A9G20_LPW_H */
+diff --git a/board/tny_a9g20_lpw/tny_a9g20_lpw.c b/board/tny_a9g20_lpw/tny_a9g20_lpw.c
+new file mode 100644
+index 0000000..cef9055
+--- /dev/null
++++ b/board/tny_a9g20_lpw/tny_a9g20_lpw.c
+@@ -0,0 +1,243 @@
++/* ----------------------------------------------------------------------------
++ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
++ * ----------------------------------------------------------------------------
++ * Copyright (c) 2008, Atmel Corporation
++
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ *
++ * - Redistributions of source code must retain the above copyright notice,
++ * this list of conditions and the disclaimer below.
++ *
++ * Atmel's name may not be used to endorse or promote products derived from
++ * this software without specific prior written permission.
++ *
++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ----------------------------------------------------------------------------
++ * File Name           : tny_a9g20_lpw.c
++ * Object              :
++ * Creation            : GH August 13th 2012
++ *-----------------------------------------------------------------------------
++ */
++#include "../../include/part.h"
++#include "../../include/gpio.h"
++#include "../../include/pmc.h"
++#include "../../include/debug.h"
++#include "../../include/sdramc.h"
++#include "../../include/main.h"
++#ifdef CFG_NANDFLASH
++#include "../../include/nandflash.h"
++#endif
++
++static inline unsigned int get_cp15(void)
++{
++	unsigned int value;
++	__asm__("mrc p15, 0, %0, c1, c0, 0" : "=r" (value));
++	return value;
++}
++
++static inline void set_cp15(unsigned int value)
++{
++	__asm__("mcr p15, 0, %0, c1, c0, 0" : : "r" (value));
++}
++
++#ifdef CFG_HW_INIT
++/*----------------------------------------------------------------------------*/
++/* \fn    hw_init							      */
++/* \brief This function performs very low level HW initialization	      */
++/* This function is invoked as soon as possible during the c_startup	      */
++/* The bss segment must be initialized					      */
++/*----------------------------------------------------------------------------*/
++void hw_init(void)
++{
++	unsigned int cp15;
++	
++	/* Configure PIOs */
++	const struct pio_desc hw_pio[] = {
++#ifdef CFG_DEBUG
++		{"RXD", AT91C_PIN_PB(14), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"TXD", AT91C_PIN_PB(15), 0, PIO_DEFAULT, PIO_PERIPH_A},
++#endif
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Disable watchdog */
++	writel(AT91C_WDTC_WDDIS, AT91C_BASE_WDTC + WDTC_WDMR);
++
++	/* At this stage the main oscillator is supposed to be enabled
++	 * PCK = MCK = MOSC */
++	writel(0x00, AT91C_BASE_PMC + PMC_PLLICPR);
++
++	/* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */
++	pmc_cfg_plla(PLLA_SETTINGS, PLL_LOCK_TIMEOUT);
++
++	/* PCK = PLLA/2 = 3 * MCK */
++	pmc_cfg_mck(MCKR_SETTINGS, PLL_LOCK_TIMEOUT);
++	/* Switch MCK on PLLA output */
++	pmc_cfg_mck(MCKR_CSS_SETTINGS, PLL_LOCK_TIMEOUT);
++
++	/* Configure PLLB */
++	pmc_cfg_pllb(PLLB_SETTINGS, PLL_LOCK_TIMEOUT);
++
++	/* Configure CP15 */
++	cp15 = get_cp15();
++	cp15 |= I_CACHE;
++	set_cp15(cp15);
++
++	/* Configure the PIO controller */
++	pio_setup(hw_pio);
++
++	/* Configure the EBI Slave Slot Cycle to 64 */
++	writel((readl((AT91C_BASE_MATRIX + MATRIX_SCFG3)) & ~0xFF) | 0x40, (AT91C_BASE_MATRIX + MATRIX_SCFG3));
++
++#ifdef CFG_DEBUG
++	/* Enable Debug messages on the DBGU */
++	dbg_init(BAUDRATE(MASTER_CLOCK, 115200));
++
++	dbg_print("Start AT91Bootstrap...\n\r");
++#endif /* CFG_DEBUG */
++
++#ifdef CFG_SDRAM
++	/* Initialize the matrix (slow slew rate enabled and LPSDRAM memory voltage = 1.8V) */
++	writel(((readl(AT91C_BASE_CCFG + CCFG_EBICSA)) | AT91C_EBI_CS1A_SDRAMC | (1<<17)) & ~0x00010000, AT91C_BASE_CCFG + CCFG_EBICSA);
++
++	/* Configure SDRAM Controller */
++	sdram_init(	AT91C_SDRAMC_NC_9  |
++				AT91C_SDRAMC_NR_13 |
++				AT91C_SDRAMC_CAS_3 |
++				AT91C_SDRAMC_NB_4_BANKS |
++				AT91C_SDRAMC_DBW_32_BITS |
++				AT91C_SDRAMC_TWR_2 |
++				AT91C_SDRAMC_TRC_7 |
++				AT91C_SDRAMC_TRP_2 |
++				AT91C_SDRAMC_TRCD_2 |
++				AT91C_SDRAMC_TRAS_5 |
++				AT91C_SDRAMC_TXSR_8,		/* Control Register */
++				(MASTER_CLOCK * 7)/1000000,	/* Refresh Timer Register */
++                                AT91C_SDRAMC_MD_LOW_POWER_SDRAM); /* SDRAM (low power)   */
++
++#endif /* CFG_SDRAM */
++}
++#endif /* CFG_HW_INIT */
++
++#ifdef CFG_SDRAM
++/*------------------------------------------------------------------------------*/
++/* \fn    sdramc_hw_init							*/
++/* \brief This function performs SDRAMC HW initialization			*/
++/*------------------------------------------------------------------------------*/
++void sdramc_hw_init(void)
++{
++	/* Configure PIOs */
++/*	const struct pio_desc sdramc_pio[] = {
++		{"D16", AT91C_PIN_PC(16), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D17", AT91C_PIN_PC(17), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D18", AT91C_PIN_PC(18), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D19", AT91C_PIN_PC(19), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D20", AT91C_PIN_PC(20), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D21", AT91C_PIN_PC(21), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D22", AT91C_PIN_PC(22), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D23", AT91C_PIN_PC(23), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D24", AT91C_PIN_PC(24), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D25", AT91C_PIN_PC(25), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D26", AT91C_PIN_PC(26), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D27", AT91C_PIN_PC(27), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D28", AT91C_PIN_PC(28), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D29", AT91C_PIN_PC(29), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D30", AT91C_PIN_PC(30), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D31", AT91C_PIN_PC(31), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++*/
++	/* Configure the SDRAMC PIO controller to output PCK0 */
++/*	pio_setup(sdramc_pio); */
++
++	writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_ASR(0));
++	writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_PDR(0));
++
++}
++#endif /* CFG_SDRAM */
++
++#ifdef CFG_NANDFLASH
++/*------------------------------------------------------------------------------*/
++/* \fn    nand_recovery						*/
++/* \brief This function erases NandFlash Block 0 if BP4 is pressed 		*/
++/*        during boot sequence							*/
++/*------------------------------------------------------------------------------*/
++static void nand_recovery(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc bp4_pio[] = {
++		{"BP4", AT91C_PIN_PA(31), 0, PIO_PULLUP, PIO_INPUT},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the PIO controller */
++	writel((1 << AT91C_ID_PIOA), PMC_PCER + AT91C_BASE_PMC);
++	pio_setup(bp4_pio);
++	
++	/* If BP4 is pressed during Boot sequence */
++	/* Erase NandFlash block 0*/
++	if (!pio_get_value(AT91C_PIN_PA(31)) )
++		AT91F_NandEraseBlock0();
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_hw_init							*/
++/* \brief NandFlash HW init							*/
++/*------------------------------------------------------------------------------*/
++void nandflash_hw_init(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc nand_pio[] = {
++		{"RDY_BSY", AT91C_PIN_PC(13), 0, PIO_PULLUP, PIO_INPUT},
++		{"NANDCS",  AT91C_PIN_PC(14), 0, PIO_PULLUP, PIO_OUTPUT},
++		{(char *) 0, 0, 0,  PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Setup Smart Media, first enable the address range of CS3 in HMATRIX user interface */
++	writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) | AT91C_EBI_CS3A_SM, AT91C_BASE_CCFG + CCFG_EBICSA);
++		    
++	/* Configure SMC CS3 */
++ 	writel((AT91C_SM_NWE_SETUP | AT91C_SM_NCS_WR_SETUP | AT91C_SM_NRD_SETUP | AT91C_SM_NCS_RD_SETUP), AT91C_BASE_SMC + SMC_SETUP3);
++  	writel((AT91C_SM_NWE_PULSE | AT91C_SM_NCS_WR_PULSE | AT91C_SM_NRD_PULSE | AT91C_SM_NCS_RD_PULSE), AT91C_BASE_SMC + SMC_PULSE3);
++	writel((AT91C_SM_NWE_CYCLE | AT91C_SM_NRD_CYCLE)						, AT91C_BASE_SMC + SMC_CYCLE3);
++	writel((AT91C_SMC_READMODE | AT91C_SMC_WRITEMODE | AT91C_SMC_NWAITM_NWAIT_DISABLE | 
++  		AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS | AT91C_SM_TDF)						, AT91C_BASE_SMC + SMC_CTRL3);
++
++	/* Configure the PIO controller */
++	writel((1 << AT91C_ID_PIOC), PMC_PCER + AT91C_BASE_PMC);
++	pio_setup(nand_pio);
++	
++	nand_recovery();
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_cfg_16bits_dbw_init						*/
++/* \brief Configure SMC in 16 bits mode						*/
++/*------------------------------------------------------------------------------*/
++void nandflash_cfg_16bits_dbw_init(void)
++{
++	writel(readl(AT91C_BASE_SMC + SMC_CTRL3) | AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS, AT91C_BASE_SMC + SMC_CTRL3);
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_cfg_8bits_dbw_init						*/
++/* \brief Configure SMC in 8 bits mode						*/
++/*------------------------------------------------------------------------------*/
++void nandflash_cfg_8bits_dbw_init(void)
++{
++	writel((readl(AT91C_BASE_SMC + SMC_CTRL3) & ~(AT91C_SMC_DBW)) | AT91C_SMC_DBW_WIDTH_EIGTH_BITS, AT91C_BASE_SMC + SMC_CTRL3);
++}
++
++#endif /* #ifdef CFG_NANDFLASH */
+diff --git a/crt0_gnu.S b/crt0_gnu.S
+index 042b617..c6cd49d 100644
+--- a/crt0_gnu.S
++++ b/crt0_gnu.S
+@@ -106,6 +106,12 @@ _relocate_to_sram:
+ #endif /* CFG_NORFLASH */
+ 
+ _setup_clocks:
++/* Test if main osc is bypassed */
++	ldr 	r0,=AT91C_PMC_MOR
++	ldr 	r1, [r0]
++	ldr 	r2,=AT91C_CKGR_OSCBYPASS 
++	ands 	r1, r1, r2
++	bne	_init_data	/* branch if OSCBYPASS=1 */
+ /* Test if main oscillator is enabled */
+ 	ldr 	r0,=AT91C_PMC_SR
+ 	ldr 	r1, [r0]
+diff --git a/include/part.h b/include/part.h
+index ba5985a..ab79af1 100644
+--- a/include/part.h
++++ b/include/part.h
+@@ -46,7 +46,11 @@
+ 
+ #ifdef AT91SAM9G20
+ #include "AT91SAM9260_inc.h"
+-#include "at91sam9g20ek.h"
++	#ifdef at91sam9g20ek
++	#include "at91sam9g20ek.h"
++	#elif tny_a9g20_lpw
++	#include "tny-a9g20-lpw.h"
++	#endif
+ #endif
+ 
+ #ifdef AT91SAM9261
+-- 
+1.7.9.5
+

board/calao/tny-a9g20-lpw/linux-3.9.config

@@ -0,0 +1,187 @@
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EMBEDDED=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_AT91=y
+CONFIG_SOC_AT91SAM9260=y
+CONFIG_SOC_AT91SAM9263=y
+CONFIG_SOC_AT91SAM9G45=y
+CONFIG_SOC_AT91SAM9X5=y
+CONFIG_SOC_AT91SAM9N12=y
+CONFIG_MACH_AT91SAM_DT=y
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AT91_TIMER_HZ=128
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_UACCESS_WITH_MEMCPY=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
+CONFIG_KEXEC=y
+CONFIG_AUTO_ZRELADDR=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+CONFIG_IPV6=y
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+CONFIG_IPV6_SIT_6RD=y
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_GLUEBI=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_ATMEL_PWM=y
+CONFIG_ATMEL_TCLIB=y
+CONFIG_EEPROM_93CX6=m
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+CONFIG_DAVICOM_PHY=y
+CONFIG_MICREL_PHY=y
+# CONFIG_WLAN is not set
+CONFIG_INPUT_POLLDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=480
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=272
+CONFIG_INPUT_JOYDEV=y
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_SERIO is not set
+CONFIG_LEGACY_PTY_COUNT=4
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_GPIO=y
+CONFIG_SPI=y
+CONFIG_SPI_ATMEL=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_AT91SAM9X_WATCHDOG=y
+CONFIG_SSB=m
+CONFIG_FB=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_ATMEL=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_ATMEL_LCDC=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_ACORN_8x8=y
+CONFIG_FONT_MINI_4x6=y
+CONFIG_LOGO=y
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_ACM=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_FTDI_SIO=y
+CONFIG_USB_SERIAL_PL2303=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_AT91=m
+CONFIG_USB_ETH=m
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_CDC_COMPOSITE=m
+CONFIG_USB_G_ACM_MS=m
+CONFIG_USB_G_MULTI=m
+CONFIG_USB_G_MULTI_CDC=y
+CONFIG_MMC=y
+CONFIG_MMC_ATMELMCI=y
+CONFIG_MMC_SPI=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_AT91RM9200=y
+CONFIG_RTC_DRV_AT91SAM9=y
+CONFIG_DMADEVICES=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_FANOTIFY=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_USER=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_CCITT=m
+CONFIG_AVERAGE=y

board/calao/usb-a9260/at91bootstrap-1.16-usb-a9260.patch

@@ -0,0 +1,603 @@
+From 43e8c90f13806405bde8eaaf3a956d0ddc806f64 Mon Sep 17 00:00:00 2001
+From: Gregory Hermant <gregory.hermant@calao-systems.com>
+Date: Tue, 2 Oct 2012 09:19:15 +0200
+Subject: [PATCH] Add support for the USB-A9260
+
+
+Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
+---
+ board/usb_a9260/nandflash/Makefile    |  122 ++++++++++++++
+ board/usb_a9260/nandflash/usb-a9260.h |  109 ++++++++++++
+ board/usb_a9260/usb_a9260.c           |  298 +++++++++++++++++++++++++++++++++
+ crt0_gnu.S                            |    7 +
+ include/part.h                        |    6 +-
+ 5 files changed, 541 insertions(+), 1 deletion(-)
+ create mode 100644 board/usb_a9260/nandflash/Makefile
+ create mode 100644 board/usb_a9260/nandflash/usb-a9260.h
+ create mode 100644 board/usb_a9260/usb_a9260.c
+
+diff --git a/board/usb_a9260/nandflash/Makefile b/board/usb_a9260/nandflash/Makefile
+new file mode 100644
+index 0000000..02f4b50
+--- /dev/null
++++ b/board/usb_a9260/nandflash/Makefile
+@@ -0,0 +1,122 @@
++# TODO: set this appropriately for your local toolchain
++ifndef ERASE_FCT
++ERASE_FCT=rm -f
++endif
++ifndef CROSS_COMPILE
++CROSS_COMPILE=arm-elf-
++endif
++
++TOOLCHAIN=gcc
++
++BOOTSTRAP_PATH=../../..
++
++# NandFlashBoot Configuration for USB-A9260
++
++# Target name (case sensitive!!!)
++TARGET=AT91SAM9260
++# Board name (case sensitive!!!)
++BOARD=usb_a9260
++# Link Address and Top_of_Memory
++LINK_ADDR=0x200000
++TOP_OF_MEMORY=0x301000
++# Name of current directory
++PROJECT=nandflash
++
++ifndef BOOT_NAME
++BOOT_NAME=$(PROJECT)_$(BOARD)
++endif
++
++INCL=./$(BOOTSTRAP_PATH)/board/$(BOARD)/$(PROJECT)
++
++ifeq ($(TOOLCHAIN), gcc)
++
++AS=$(CROSS_COMPILE)gcc
++CC=$(CROSS_COMPILE)gcc
++LD=$(CROSS_COMPILE)gcc
++NM= $(CROSS_COMPILE)nm
++SIZE=$(CROSS_COMPILE)size
++OBJCOPY=$(CROSS_COMPILE)objcopy
++OBJDUMP=$(CROSS_COMPILE)objdump
++CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL)
++ASFLAGS=-g -mcpu=arm926ej-s -c -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
++
++# Linker flags.
++#  -Wl,...:     tell GCC to pass this to linker.
++#    -Map:      create map file
++#    --cref:    add cross reference to map file
++LDFLAGS+=-nostartfiles -nostdlib -Wl,-Map=$(BOOT_NAME).map,--cref
++LDFLAGS+=-T $(BOOTSTRAP_PATH)/elf32-littlearm.lds -Ttext $(LINK_ADDR)
++OBJS=crt0_gnu.o
++
++endif
++
++OBJS+=\
++	$(BOARD).o \
++	main.o \
++	gpio.o \
++	pmc.o \
++	debug.o \
++	sdramc.o \
++	nandflash.o \
++	_udivsi3.o \
++	_umodsi3.o \
++	div0.o \
++	udiv.o \
++	string.o
++
++
++rebuild: clean all
++
++all: 	$(BOOT_NAME)
++
++ifeq ($(TOOLCHAIN), gcc)
++$(BOOT_NAME): $(OBJS)
++	$(LD) $(LDFLAGS) -n -o $(BOOT_NAME).elf $(OBJS)
++	$(OBJCOPY) --strip-debug --strip-unneeded $(BOOT_NAME).elf -O binary $(BOOT_NAME).bin
++endif
++
++
++$(BOARD).o: $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c -o $(BOARD).o
++
++main.o: $(BOOTSTRAP_PATH)/main.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/main.c -o main.o
++
++gpio.o: $(BOOTSTRAP_PATH)/driver/gpio.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/gpio.c -o gpio.o
++
++pmc.o:  $(BOOTSTRAP_PATH)/driver/pmc.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/pmc.c -o pmc.o
++
++debug.o: $(BOOTSTRAP_PATH)/driver/debug.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/debug.c -o debug.o
++
++sdramc.o:  $(BOOTSTRAP_PATH)/driver/sdramc.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/sdramc.c -o sdramc.o
++
++dataflash.o:  $(BOOTSTRAP_PATH)/driver/dataflash.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/dataflash.c -o dataflash.o
++
++nandflash.o:  $(BOOTSTRAP_PATH)/driver/nandflash.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/nandflash.c -o nandflash.o
++
++crt0_gnu.o:  $(BOOTSTRAP_PATH)/crt0_gnu.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/crt0_gnu.S -o crt0_gnu.o
++
++div0.o:  $(BOOTSTRAP_PATH)/lib/div0.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/div0.c -o div0.o
++
++string.o:  $(BOOTSTRAP_PATH)/lib/string.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/string.c -o string.o
++
++udiv.o:  $(BOOTSTRAP_PATH)/lib/udiv.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/udiv.c -o udiv.o
++
++_udivsi3.o:  $(BOOTSTRAP_PATH)/lib/_udivsi3.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_udivsi3.S -o _udivsi3.o
++
++_umodsi3.o:  $(BOOTSTRAP_PATH)/lib/_umodsi3.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_umodsi3.S -o _umodsi3.o
++
++clean:
++	$(ERASE_FCT) *.o *.bin *.elf *.map
+diff --git a/board/usb_a9260/nandflash/usb-a9260.h b/board/usb_a9260/nandflash/usb-a9260.h
+new file mode 100644
+index 0000000..2aaf759
+--- /dev/null
++++ b/board/usb_a9260/nandflash/usb-a9260.h
+@@ -0,0 +1,109 @@
++/* ----------------------------------------------------------------------------
++ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
++ * ----------------------------------------------------------------------------
++ * Copyright (c) 2006, Atmel Corporation
++
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ *
++ * - Redistributions of source code must retain the above copyright notice,
++ * this list of conditions and the disclaimer below.
++ *
++ * Atmel's name may not be used to endorse or promote products derived from
++ * this software without specific prior written permission.
++ *
++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ----------------------------------------------------------------------------
++ * File Name           : usb-a9260.h
++ * Object              :
++ * Creation            : GH Oct 1th 2012
++ *-----------------------------------------------------------------------------
++ */
++#ifndef _USB_A9260_H
++#define _USB_A9260_H
++
++/* ******************************************************************* */
++/* PMC Settings                                                        */
++/*                                                                     */
++/* The main oscillator is enabled as soon as possible in the c_startup */
++/* and MCK is switched on the main oscillator.                         */
++/* PLL initialization is done later in the hw_init() function          */
++/* ******************************************************************* */
++#define MASTER_CLOCK		(180000000/2)
++#define PLL_LOCK_TIMEOUT	1000000
++
++#define PLLA_SETTINGS	0x20593F06
++#define PLLB_SETTINGS	0x10483F0E
++
++/* Switch MCK on PLLA output PCK = PLLA = 2 * MCK */
++#define MCKR_SETTINGS		(AT91C_PMC_PRES_CLK | AT91C_PMC_MDIV_2)
++#define MCKR_CSS_SETTINGS	(AT91C_PMC_CSS_PLLA_CLK | MCKR_SETTINGS)
++
++/* ******************************************************************* */
++/* NandFlash Settings                                                  */
++/*                                                                     */
++/* ******************************************************************* */
++#define AT91C_SMARTMEDIA_BASE	0x40000000
++
++#define AT91_SMART_MEDIA_ALE    (1 << 21)	/* our ALE is AD21 */
++#define AT91_SMART_MEDIA_CLE    (1 << 22)	/* our CLE is AD22 */
++
++#define NAND_DISABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_SODR = AT91C_PIO_PC14;} while(0)
++#define NAND_ENABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_CODR = AT91C_PIO_PC14;} while(0)
++
++#define NAND_WAIT_READY() while (!(*(volatile unsigned int *)AT91C_PIOC_PDSR & AT91C_PIO_PC13))
++
++
++/* ******************************************************************** */
++/* SMC Chip Select 3 Timings for NandFlash for MASTER_CLOCK = 90000000.*/
++/* Please refer to SMC section in AT91SAM datasheet to learn how 	*/
++/* to generate these values. 						*/
++/* ******************************************************************** */
++#define AT91C_SM_NWE_SETUP	(1 << 0)
++#define AT91C_SM_NCS_WR_SETUP	(0 << 8)
++#define AT91C_SM_NRD_SETUP	(1 << 16)
++#define AT91C_SM_NCS_RD_SETUP	(0 << 24)
++  
++#define AT91C_SM_NWE_PULSE 	(3 << 0)
++#define AT91C_SM_NCS_WR_PULSE	(3 << 8)
++#define AT91C_SM_NRD_PULSE	(3 << 16)
++#define AT91C_SM_NCS_RD_PULSE	(3 << 24)
++  
++#define AT91C_SM_NWE_CYCLE 	(5 << 0)
++#define AT91C_SM_NRD_CYCLE	(5 << 16)
++#define AT91C_SM_TDF	        (2 << 16)
++
++/* ******************************************************************* */
++/* BootStrap Settings                                                  */
++/*                                                                     */
++/* ******************************************************************* */
++#define IMG_ADDRESS 		0x20000		/* Image Address in NandFlash */
++#define	IMG_SIZE		0x40000		/* Image Size in NandFlash    */
++
++#define MACH_TYPE       	0x6AD		/* USB-A9260 */
++#define JUMP_ADDR		0x23F00000	/* Final Jump Address 	      */
++
++/* ******************************************************************* */
++/* Application Settings                                                */
++/* ******************************************************************* */
++#undef CFG_DEBUG
++#undef CFG_DATAFLASH
++
++#define CFG_NANDFLASH
++#undef	NANDFLASH_SMALL_BLOCKS	/* NANDFLASH_LARGE_BLOCKS used instead */
++
++#define CFG_HW_INIT
++#define CFG_SDRAM
++
++#endif	/* _USB_A9260_H */
+diff --git a/board/usb_a9260/usb_a9260.c b/board/usb_a9260/usb_a9260.c
+new file mode 100644
+index 0000000..de30f0b
+--- /dev/null
++++ b/board/usb_a9260/usb_a9260.c
+@@ -0,0 +1,298 @@
++/* ----------------------------------------------------------------------------
++ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
++ * ----------------------------------------------------------------------------
++ * Copyright (c) 2006, Atmel Corporation
++
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ *
++ * - Redistributions of source code must retain the above copyright notice,
++ * this list of conditions and the disclaiimer below.
++ *
++ * Atmel's name may not be used to endorse or promote products derived from
++ * this software without specific prior written permission.
++ *
++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ----------------------------------------------------------------------------
++ * File Name           : usb_a9260.c
++ * Object              :
++ * Creation            : GH Oct 1th 2012
++ *-----------------------------------------------------------------------------
++ */
++#include "../../include/part.h"
++#include "../../include/gpio.h"
++#include "../../include/pmc.h"
++#include "../../include/debug.h"
++#include "../../include/sdramc.h"
++#include "../../include/main.h"
++#ifdef CFG_NANDFLASH
++#include "../../include/nandflash.h"
++#endif
++#ifdef CFG_DATAFLASH
++#include "../../include/dataflash.h"
++#endif
++
++static inline unsigned int get_cp15(void)
++{
++	unsigned int value;
++	__asm__("mrc p15, 0, %0, c1, c0, 0" : "=r" (value));
++	return value;
++}
++
++static inline void set_cp15(unsigned int value)
++{
++	__asm__("mcr p15, 0, %0, c1, c0, 0" : : "r" (value));
++}
++
++#ifdef CFG_HW_INIT
++/*----------------------------------------------------------------------------*/
++/* \fn    hw_init							      */
++/* \brief This function performs very low level HW initialization	      */
++/* This function is invoked as soon as possible during the c_startup	      */
++/* The bss segment must be initialized					      */
++/*----------------------------------------------------------------------------*/
++void hw_init(void)
++{
++	unsigned int cp15;
++	
++	/* Configure PIOs */
++	const struct pio_desc hw_pio[] = {
++#ifdef CFG_DEBUG
++		{"RXD", AT91C_PIN_PB(14), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"TXD", AT91C_PIN_PB(15), 0, PIO_DEFAULT, PIO_PERIPH_A},
++#endif
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Disable watchdog */
++	writel(AT91C_WDTC_WDDIS, AT91C_BASE_WDTC + WDTC_WDMR);
++
++	/* At this stage the main oscillator is supposed to be enabled
++	 * PCK = MCK = MOSC */
++
++	/* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */
++	pmc_cfg_plla(PLLA_SETTINGS, PLL_LOCK_TIMEOUT);
++
++	/* PCK = PLLA = 2 * MCK */
++	pmc_cfg_mck(MCKR_SETTINGS, PLL_LOCK_TIMEOUT);
++	/* Switch MCK on PLLA output */
++	pmc_cfg_mck(MCKR_CSS_SETTINGS, PLL_LOCK_TIMEOUT);
++
++	/* Configure PLLB */
++	pmc_cfg_pllb(PLLB_SETTINGS, PLL_LOCK_TIMEOUT);
++
++	/* Configure CP15 */
++	cp15 = get_cp15();
++	cp15 |= I_CACHE;
++	set_cp15(cp15);
++
++	/* Configure the PIO controller */
++	pio_setup(hw_pio);
++
++	/* Configure the EBI Slave Slot Cycle to 64 */
++	writel( (readl((AT91C_BASE_MATRIX + MATRIX_SCFG3)) & ~0xFF) | 0x40, (AT91C_BASE_MATRIX + MATRIX_SCFG3));
++
++#ifdef CFG_DEBUG
++	/* Enable Debug messages on the DBGU */
++	dbg_init(BAUDRATE(MASTER_CLOCK, 115200));
++
++	dbg_print("Start AT91Bootstrap...\n\r");
++#endif /* CFG_DEBUG */
++
++#ifdef CFG_SDRAM
++	/* Initialize the matrix */
++	writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) | AT91C_EBI_CS1A_SDRAMC, AT91C_BASE_CCFG + CCFG_EBICSA);
++
++	/* Configure SDRAM Controller */
++	sdram_init(	AT91C_SDRAMC_NC_9  |
++				AT91C_SDRAMC_NR_13 |
++				AT91C_SDRAMC_CAS_2 |
++				AT91C_SDRAMC_NB_4_BANKS |
++				AT91C_SDRAMC_DBW_32_BITS |
++				AT91C_SDRAMC_TWR_2 |
++				AT91C_SDRAMC_TRC_7 |
++				AT91C_SDRAMC_TRP_2 |
++				AT91C_SDRAMC_TRCD_2 |
++				AT91C_SDRAMC_TRAS_5 |
++				AT91C_SDRAMC_TXSR_8,		/* Control Register */
++				(MASTER_CLOCK * 7)/1000000,	/* Refresh Timer Register */
++				AT91C_SDRAMC_MD_SDRAM);		/* SDRAM (no low power)   */ 
++
++
++#endif /* CFG_SDRAM */
++}
++#endif /* CFG_HW_INIT */
++
++#ifdef CFG_SDRAM
++/*------------------------------------------------------------------------------*/
++/* \fn    sdramc_hw_init							*/
++/* \brief This function performs SDRAMC HW initialization			*/
++/*------------------------------------------------------------------------------*/
++void sdramc_hw_init(void)
++{
++	/* Configure PIOs */
++/*	const struct pio_desc sdramc_pio[] = {
++		{"D16", AT91C_PIN_PC(16), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D17", AT91C_PIN_PC(17), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D18", AT91C_PIN_PC(18), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D19", AT91C_PIN_PC(19), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D20", AT91C_PIN_PC(20), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D21", AT91C_PIN_PC(21), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D22", AT91C_PIN_PC(22), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D23", AT91C_PIN_PC(23), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D24", AT91C_PIN_PC(24), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D25", AT91C_PIN_PC(25), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D26", AT91C_PIN_PC(26), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D27", AT91C_PIN_PC(27), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D28", AT91C_PIN_PC(28), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D29", AT91C_PIN_PC(29), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D30", AT91C_PIN_PC(30), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D31", AT91C_PIN_PC(31), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++*/
++	/* Configure the SDRAMC PIO controller to output PCK0 */
++/*	pio_setup(sdramc_pio); */
++
++	writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_ASR(0));
++	writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_PDR(0));
++
++}
++#endif /* CFG_SDRAM */
++
++#ifdef CFG_DATAFLASH
++
++/*------------------------------------------------------------------------------*/
++/* \fn    df_recovery								*/
++/* \brief This function erases DataFlash Page 0 if USR PB is pressed 		*/
++/*        during boot sequence							*/
++/*------------------------------------------------------------------------------*/
++void df_recovery(AT91PS_DF pDf)
++{
++#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS0_DATAFLASH)
++	/* Configure PIOs */
++	const struct pio_desc usrpb_pio[] = {
++		{"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the PIO controller */
++	writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
++	pio_setup(usrpb_pio);
++	
++	/* If USR PB is pressed during Boot sequence */
++	/* Erase DataFlash Page 0*/
++	if ( !pio_get_value(AT91C_PIN_PB(10)) )
++		df_page_erase(pDf, 0);
++#endif
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    df_hw_init								*/
++/* \brief This function performs DataFlash HW initialization			*/
++/*------------------------------------------------------------------------------*/
++void df_hw_init(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc df_pio[] = {
++		{"MISO",  AT91C_PIN_PA(0), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"MOSI",  AT91C_PIN_PA(1), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"SPCK",  AT91C_PIN_PA(2), 0, PIO_DEFAULT, PIO_PERIPH_A},
++#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS0_DATAFLASH)
++		{"NPCS0", AT91C_PIN_PA(3), 0, PIO_DEFAULT, PIO_PERIPH_A},
++#endif
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the PIO controller */
++	pio_setup(df_pio);
++}
++#endif /* CFG_DATAFLASH */
++
++
++
++#ifdef CFG_NANDFLASH
++/*------------------------------------------------------------------------------*/
++/* \fn    nand_recovery						*/
++/* \brief This function erases NandFlash Block 0 if USR PB is pressed 		*/
++/*        during boot sequence							*/
++/*------------------------------------------------------------------------------*/
++static void nand_recovery(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc usrpb_pio[] = {
++		{"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the PIO controller */
++	writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
++	pio_setup(usrpb_pio);
++	
++	/* If USR PB is pressed during Boot sequence */
++	/* Erase NandFlash block 0*/
++	if (!pio_get_value(AT91C_PIN_PB(10)) )
++		AT91F_NandEraseBlock0();
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_hw_init							*/
++/* \brief NandFlash HW init							*/
++/*------------------------------------------------------------------------------*/
++void nandflash_hw_init(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc nand_pio[] = {
++		{"RDY_BSY", AT91C_PIN_PC(13), 0, PIO_PULLUP, PIO_INPUT},
++		{"NANDCS",  AT91C_PIN_PC(14), 0, PIO_PULLUP, PIO_OUTPUT},
++		{(char *) 0, 0, 0,  PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Setup Smart Media, first enable the address range of CS3 in HMATRIX user interface */
++	writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) | AT91C_EBI_CS3A_SM, AT91C_BASE_CCFG + CCFG_EBICSA);
++		    
++	/* Configure SMC CS3 */
++ 	writel((AT91C_SM_NWE_SETUP | AT91C_SM_NCS_WR_SETUP | AT91C_SM_NRD_SETUP | AT91C_SM_NCS_RD_SETUP), AT91C_BASE_SMC + SMC_SETUP3);
++  	writel((AT91C_SM_NWE_PULSE | AT91C_SM_NCS_WR_PULSE | AT91C_SM_NRD_PULSE | AT91C_SM_NCS_RD_PULSE), AT91C_BASE_SMC + SMC_PULSE3);
++	writel((AT91C_SM_NWE_CYCLE | AT91C_SM_NRD_CYCLE)						, AT91C_BASE_SMC + SMC_CYCLE3);
++	writel((AT91C_SMC_READMODE | AT91C_SMC_WRITEMODE | AT91C_SMC_NWAITM_NWAIT_DISABLE | 
++  		AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS | AT91C_SM_TDF)						, AT91C_BASE_SMC + SMC_CTRL3);
++
++	/* Configure the PIO controller */
++	writel((1 << AT91C_ID_PIOC), PMC_PCER + AT91C_BASE_PMC);
++	pio_setup(nand_pio);
++	
++	nand_recovery();
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_cfg_16bits_dbw_init						*/
++/* \brief Configure SMC in 16 bits mode						*/
++/*------------------------------------------------------------------------------*/
++void nandflash_cfg_16bits_dbw_init(void)
++{
++	writel(readl(AT91C_BASE_SMC + SMC_CTRL3) | AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS, AT91C_BASE_SMC + SMC_CTRL3);
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_cfg_8bits_dbw_init						*/
++/* \brief Configure SMC in 8 bits mode						*/
++/*------------------------------------------------------------------------------*/
++void nandflash_cfg_8bits_dbw_init(void)
++{
++	writel((readl(AT91C_BASE_SMC + SMC_CTRL3) & ~(AT91C_SMC_DBW)) | AT91C_SMC_DBW_WIDTH_EIGTH_BITS, AT91C_BASE_SMC + SMC_CTRL3);
++}
++
++
++#endif /* #ifdef CFG_NANDFLASH */
+diff --git a/crt0_gnu.S b/crt0_gnu.S
+index 042b617..002feef 100644
+--- a/crt0_gnu.S
++++ b/crt0_gnu.S
+@@ -106,6 +106,13 @@ _relocate_to_sram:
+ #endif /* CFG_NORFLASH */
+ 
+ _setup_clocks:
++/* Test if main osc is bypassed */
++	ldr 	r0,=AT91C_PMC_MOR
++	ldr 	r1, [r0]
++	ldr 	r2,=AT91C_CKGR_OSCBYPASS 
++	ands 	r1, r1, r2
++	bne	_init_data	/* branch if OSCBYPASS=1 */
++
+ /* Test if main oscillator is enabled */
+ 	ldr 	r0,=AT91C_PMC_SR
+ 	ldr 	r1, [r0]
+diff --git a/include/part.h b/include/part.h
+index ba5985a..212789f 100644
+--- a/include/part.h
++++ b/include/part.h
+@@ -35,7 +35,11 @@
+ 
+ #ifdef AT91SAM9260
+ #include "AT91SAM9260_inc.h"
+-#include "at91sam9260ek.h"
++	#ifdef at91sam9260ek
++	#include "at91sam9260ek.h"
++	#elif usb_a9260
++	#include "usb-a9260.h"
++	#endif
+ #endif
+ 
+ #ifdef AT91SAM9XE
+-- 
+1.7.9.5
+

board/calao/usb-a9260/linux-3.7.4.config

@@ -0,0 +1,97 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_AT91=y
+CONFIG_ARCH_AT91SAM9260=y
+CONFIG_MACH_USB_A9260=y
+CONFIG_AT91_SLOW_CLOCK=y
+# CONFIG_ARM_THUMB is not set
+CONFIG_AEABI=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
+CONFIG_FPE_NWFPE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_SPI=y
+CONFIG_SPI_ATMEL=y
+# CONFIG_HWMON is not set
+# CONFIG_USB_HID is not set
+CONFIG_USB=y
+CONFIG_USB_MON=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_EXT2_FS=y
+CONFIG_FUSE_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_UBIFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_LL=y

board/calao/usb-a9263/at91bootstrap-1.16-usb-a9263.patch

@@ -0,0 +1,851 @@
+From 74796655212d321f50ab89e8c5570245901f4cba Mon Sep 17 00:00:00 2001
+From: Gregory Hermant <gregory.hermant@calao-systems.com>
+Date: Thu, 5 Jul 2012 18:44:07 +0200
+Subject: [PATCH] Add support for the Calao-systems USB-A9263
+
+
+Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
+---
+ board/usb_a9263/dataflash/Makefile    |  115 +++++++++++++
+ board/usb_a9263/dataflash/usb-a9263.h |   97 +++++++++++
+ board/usb_a9263/nandflash/Makefile    |  117 ++++++++++++++
+ board/usb_a9263/nandflash/usb-a9263.h |  116 +++++++++++++
+ board/usb_a9263/usb_a9263.c           |  285 +++++++++++++++++++++++++++++++++
+ crt0_gnu.S                            |    7 +
+ driver/dataflash.c                    |    6 +-
+ include/part.h                        |    6 +-
+ 8 files changed, 745 insertions(+), 4 deletions(-)
+ create mode 100644 board/usb_a9263/dataflash/Makefile
+ create mode 100644 board/usb_a9263/dataflash/usb-a9263.h
+ create mode 100644 board/usb_a9263/nandflash/Makefile
+ create mode 100644 board/usb_a9263/nandflash/usb-a9263.h
+ create mode 100644 board/usb_a9263/usb_a9263.c
+
+diff --git a/board/usb_a9263/dataflash/Makefile b/board/usb_a9263/dataflash/Makefile
+new file mode 100644
+index 0000000..332685e
+--- /dev/null
++++ b/board/usb_a9263/dataflash/Makefile
+@@ -0,0 +1,115 @@
++# TODO: set this appropriately for your local toolchain
++#SHELL=C:\CYGWIN_REP\dwn_071004\bin\BASH.exe
++CROSS_COMPILE=arm-elf-
++#CROSS_COMPILE = arm-softfloat-linux-gnu-
++
++TOOLCHAIN=gcc
++
++BOOTSTRAP_PATH=../../..
++
++# DataFlashBoot Configuration for USB-A9263
++
++# Target name (case sensitive!!!)
++TARGET=AT91SAM9263
++# Board name (case sensitive!!!)
++BOARD=usb_a9263
++# Link Address and Top_of_Memory
++LINK_ADDR=0x300000
++TOP_OF_MEMORY=0x314000
++# Name of current directory
++PROJECT=dataflash
++
++ifndef BOOT_NAME
++BOOT_NAME=$(PROJECT)_$(BOARD)
++endif
++
++INCL=./$(BOOTSTRAP_PATH)/board/$(BOARD)/$(PROJECT)
++
++ifeq ($(TOOLCHAIN), gcc)
++
++AS=$(CROSS_COMPILE)gcc
++CC=$(CROSS_COMPILE)gcc
++LD=$(CROSS_COMPILE)gcc
++NM= $(CROSS_COMPILE)nm
++SIZE=$(CROSS_COMPILE)size
++OBJCOPY=$(CROSS_COMPILE)objcopy
++OBJDUMP=$(CROSS_COMPILE)objdump
++CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL)
++ASFLAGS=-g -mcpu=arm9 -c -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
++
++# Linker flags.
++#  -Wl,...:     tell GCC to pass this to linker.
++#    -Map:      create map file
++#    --cref:    add cross reference to map file
++LDFLAGS+=-nostartfiles -nostdlib  -Wl,-Map=$(BOOT_NAME).map,--cref
++LDFLAGS+=-T $(BOOTSTRAP_PATH)/elf32-littlearm.lds -Ttext $(LINK_ADDR)
++OBJS=crt0_gnu.o
++
++endif
++
++OBJS+=\
++	$(BOARD).o \
++	main.o \
++	gpio.o \
++	pmc.o \
++	debug.o \
++	sdramc.o \
++	dataflash.o \
++	_udivsi3.o \
++	_umodsi3.o \
++	div0.o \
++	udiv.o \
++	string.o
++
++rebuild: clean all
++
++all: 	$(BOOT_NAME)
++
++ifeq ($(TOOLCHAIN), gcc)
++$(BOOT_NAME): $(OBJS)
++	$(LD) $(LDFLAGS) -n -o $(BOOT_NAME).elf $(OBJS)
++	$(OBJCOPY) --strip-debug --strip-unneeded $(BOOT_NAME).elf -O binary $(BOOT_NAME).bin
++endif
++	
++	
++$(BOARD).o: $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c -o $(BOARD).o
++
++main.o: $(BOOTSTRAP_PATH)/main.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/main.c -o main.o
++
++gpio.o: $(BOOTSTRAP_PATH)/driver/gpio.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/gpio.c -o gpio.o
++
++pmc.o:  $(BOOTSTRAP_PATH)/driver/pmc.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/pmc.c -o pmc.o
++
++debug.o: $(BOOTSTRAP_PATH)/driver/debug.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/debug.c -o debug.o
++
++sdramc.o:  $(BOOTSTRAP_PATH)/driver/sdramc.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/sdramc.c -o sdramc.o
++
++dataflash.o:  $(BOOTSTRAP_PATH)/driver/dataflash.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/dataflash.c -o dataflash.o
++
++crt0_gnu.o:  $(BOOTSTRAP_PATH)/crt0_gnu.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/crt0_gnu.S -o crt0_gnu.o
++
++div0.o:  $(BOOTSTRAP_PATH)/lib/div0.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/div0.c -o div0.o
++
++string.o:  $(BOOTSTRAP_PATH)/lib/string.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/string.c -o string.o
++
++udiv.o:  $(BOOTSTRAP_PATH)/lib/udiv.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/udiv.c -o udiv.o
++
++_udivsi3.o:  $(BOOTSTRAP_PATH)/lib/_udivsi3.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_udivsi3.S -o _udivsi3.o
++
++_umodsi3.o:  $(BOOTSTRAP_PATH)/lib/_umodsi3.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_umodsi3.S -o _umodsi3.o
++
++clean:
++	rm -f *.o *.bin *.elf *.map
+diff --git a/board/usb_a9263/dataflash/usb-a9263.h b/board/usb_a9263/dataflash/usb-a9263.h
+new file mode 100644
+index 0000000..40a3af8
+--- /dev/null
++++ b/board/usb_a9263/dataflash/usb-a9263.h
+@@ -0,0 +1,97 @@
++/* ----------------------------------------------------------------------------
++ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
++ * ----------------------------------------------------------------------------
++ * Copyright (c) 2006, Atmel Corporation
++
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ *
++ * - Redistributions of source code must retain the above copyright notice,
++ * this list of conditions and the disclaimer below.
++ *
++ * Atmel's name may not be used to endorse or promote products derived from
++ * this software without specific prior written permission.
++ *
++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ----------------------------------------------------------------------------
++ * File Name           : usb-a9263.h
++ * Object              :
++ * Creation            : GH Jun 28th 2012
++ *-----------------------------------------------------------------------------
++ */
++#ifndef _USB_A9263_H
++#define _USB_A9263_H
++
++/* ******************************************************************* */
++/* PMC Settings                                                        */
++/*                                                                     */
++/* The main oscillator is enabled as soon as possible in the c_startup */
++/* and MCK is switched on the main oscillator.                         */
++/* PLL initialization is done later in the hw_init() function          */
++/* ******************************************************************* */
++#define MASTER_CLOCK		(180000000/2)
++#define PLL_LOCK_TIMEOUT	1000000
++
++#define PLLA_SETTINGS	0x20593F06
++#define PLLB_SETTINGS	0x10483F0E
++
++/* Switch MCK on PLLA output PCK = PLLA = 2 * MCK */
++#define MCKR_SETTINGS		(AT91C_PMC_PRES_CLK | AT91C_PMC_MDIV_2)
++#define MCKR_CSS_SETTINGS	(AT91C_PMC_CSS_PLLA_CLK | MCKR_SETTINGS)
++
++/* ******************************************************************* */
++/* DataFlash Settings                                                  */
++/*                                                                     */
++/* ******************************************************************* */
++#define AT91C_BASE_SPI	AT91C_BASE_SPI0
++#define AT91C_ID_SPI	AT91C_ID_SPI0
++
++/* SPI CLOCK */
++#define AT91C_SPI_CLK 		 8000000
++/* AC characteristics */
++/* DLYBS = tCSS= 250ns min and DLYBCT = tCSH = 250ns */
++#define DATAFLASH_TCSS		(0x1a << 16)	/* 250ns min (tCSS) <=> 12/48000000 = 250ns */
++#define DATAFLASH_TCHS		(0x1 << 24)	/* 250ns min (tCSH) <=> (64*1+SCBR)/(2*48000000) */
++
++#define DF_CS_SETTINGS 		(AT91C_SPI_NCPHA | (AT91C_SPI_DLYBS & DATAFLASH_TCSS) | (AT91C_SPI_DLYBCT & DATAFLASH_TCHS) | ((MASTER_CLOCK / AT91C_SPI_CLK) << 8))
++
++/* ******************************************************************* */
++/* SDRAMC Settings                                                     */
++/*                                                                     */
++/* ******************************************************************* */
++#define AT91C_BASE_SDRAMC 	AT91C_BASE_SDRAMC0
++#define AT91C_EBI_SDRAM		AT91C_EBI0_SDRAM
++
++/* ******************************************************************* */
++/* BootStrap Settings                                                  */
++/*                                                                     */
++/* ******************************************************************* */
++#define AT91C_SPI_PCS_DATAFLASH		AT91C_SPI_PCS0_DATAFLASH	/* Boot on SPI NCS0 */
++
++#define IMG_ADDRESS 			0x4000			/* Image Address in DataFlash */
++#define	IMG_SIZE			0x40000			/* Image Size in DataFlash    */
++
++#define MACH_TYPE       		0x6AE       		/* USB-A9263 */
++#define JUMP_ADDR			0x23F00000		/* Final Jump Address 	      */
++
++/* ******************************************************************* */
++/* Application Settings                                                */
++/* ******************************************************************* */
++#define CFG_HW_INIT
++#define CFG_SDRAM
++#undef	CFG_DEBUG
++
++#define CFG_DATAFLASH
++
++#endif	/* _USB_A9263_H */
+diff --git a/board/usb_a9263/nandflash/Makefile b/board/usb_a9263/nandflash/Makefile
+new file mode 100644
+index 0000000..c453098
+--- /dev/null
++++ b/board/usb_a9263/nandflash/Makefile
+@@ -0,0 +1,117 @@
++# TODO: set this appropriately for your local toolchain
++#SHELL=C:\CYGWIN_REP\dwn_071004\bin\BASH.exe
++CROSS_COMPILE=arm-elf-
++
++TOOLCHAIN=gcc
++
++BOOTSTRAP_PATH=../../..
++
++# NandFlashBoot Configuration for USB-A9263
++
++# Target name (case sensitive!!!)
++TARGET=AT91SAM9263
++# Board name (case sensitive!!!)
++BOARD=usb_a9263
++# Link Address and Top_of_Memory
++LINK_ADDR=0x300000
++TOP_OF_MEMORY=0x314000
++# Name of current directory
++PROJECT=nandflash
++
++ifndef BOOT_NAME
++BOOT_NAME=$(PROJECT)_$(BOARD)
++endif
++
++INCL=./$(BOOTSTRAP_PATH)/board/$(BOARD)/$(PROJECT)
++
++ifeq ($(TOOLCHAIN), gcc)
++
++AS=$(CROSS_COMPILE)gcc
++CC=$(CROSS_COMPILE)gcc
++LD=$(CROSS_COMPILE)gcc
++NM= $(CROSS_COMPILE)nm
++SIZE=$(CROSS_COMPILE)size
++OBJCOPY=$(CROSS_COMPILE)objcopy
++OBJDUMP=$(CROSS_COMPILE)objdump
++CCFLAGS=-g -mcpu=arm9 -O0 -Wall -D$(TARGET) -D$(BOARD) -I$(INCL)
++ASFLAGS=-g -mcpu=arm9 -c -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
++
++# Linker flags.
++#  -Wl,...:     tell GCC to pass this to linker.
++#    -Map:      create map file
++#    --cref:    add cross reference to map file
++LDFLAGS+=-nostartfiles -nostdlib  -Wl,-Map=$(BOOT_NAME).map,--cref
++LDFLAGS+=-T $(BOOTSTRAP_PATH)/elf32-littlearm.lds -Ttext $(LINK_ADDR)
++OBJS=crt0_gnu.o
++
++endif
++
++OBJS+=\
++	$(BOARD).o \
++	main.o \
++	gpio.o \
++	pmc.o \
++	debug.o \
++	sdramc.o \
++	nandflash.o \
++	_udivsi3.o \
++	_umodsi3.o \
++	div0.o \
++	udiv.o \
++	string.o
++
++rebuild: clean all
++
++all: 	$(BOOT_NAME)
++
++ifeq ($(TOOLCHAIN), gcc)
++$(BOOT_NAME): $(OBJS)
++	$(LD) $(LDFLAGS) -n -o $(BOOT_NAME).elf $(OBJS)
++	$(OBJCOPY) --strip-debug --strip-unneeded $(BOOT_NAME).elf -O binary $(BOOT_NAME).bin
++endif
++	
++	
++$(BOARD).o: $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c -o $(BOARD).o
++
++main.o: $(BOOTSTRAP_PATH)/main.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/main.c -o main.o
++
++gpio.o: $(BOOTSTRAP_PATH)/driver/gpio.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/gpio.c -o gpio.o
++
++pmc.o:  $(BOOTSTRAP_PATH)/driver/pmc.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/pmc.c -o pmc.o
++
++debug.o: $(BOOTSTRAP_PATH)/driver/debug.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/debug.c -o debug.o
++
++sdramc.o:  $(BOOTSTRAP_PATH)/driver/sdramc.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/sdramc.c -o sdramc.o
++
++dataflash.o:  $(BOOTSTRAP_PATH)/driver/dataflash.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/dataflash.c -o dataflash.o
++
++nandflash.o:  $(BOOTSTRAP_PATH)/driver/nandflash.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/nandflash.c -o nandflash.o
++
++crt0_gnu.o:  $(BOOTSTRAP_PATH)/crt0_gnu.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/crt0_gnu.S -o crt0_gnu.o
++
++div0.o:  $(BOOTSTRAP_PATH)/lib/div0.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/div0.c -o div0.o
++
++string.o:  $(BOOTSTRAP_PATH)/lib/string.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/string.c -o string.o
++
++udiv.o:  $(BOOTSTRAP_PATH)/lib/udiv.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/udiv.c -o udiv.o
++
++_udivsi3.o:  $(BOOTSTRAP_PATH)/lib/_udivsi3.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_udivsi3.S -o _udivsi3.o
++
++_umodsi3.o:  $(BOOTSTRAP_PATH)/lib/_umodsi3.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_umodsi3.S -o _umodsi3.o
++
++clean:
++	rm -f *.o *.bin *.elf *.map
+diff --git a/board/usb_a9263/nandflash/usb-a9263.h b/board/usb_a9263/nandflash/usb-a9263.h
+new file mode 100644
+index 0000000..24e2cf1
+--- /dev/null
++++ b/board/usb_a9263/nandflash/usb-a9263.h
+@@ -0,0 +1,116 @@
++/* ----------------------------------------------------------------------------
++ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
++ * ----------------------------------------------------------------------------
++ * Copyright (c) 2006, Atmel Corporation
++
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ *
++ * - Redistributions of source code must retain the above copyright notice,
++ * this list of conditions and the disclaimer below.
++ *
++ * Atmel's name may not be used to endorse or promote products derived from
++ * this software without specific prior written permission.
++ *
++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ----------------------------------------------------------------------------
++ * File Name           : usb-a9263.h
++ * Object              :
++ * Creation            : GH Jun 28th 2012
++ *-----------------------------------------------------------------------------
++ */
++#ifndef _USB_A9263_H
++#define _USB_A9263_H
++
++/* ******************************************************************* */
++/* PMC Settings                                                        */
++/*                                                                     */
++/* The main oscillator is enabled as soon as possible in the c_startup */
++/* and MCK is switched on the main oscillator.                         */
++/* PLL initialization is done later in the hw_init() function          */
++/* ******************************************************************* */
++#define MASTER_CLOCK		(180000000/2)
++#define PLL_LOCK_TIMEOUT	1000000
++
++#define PLLA_SETTINGS	0x20593F06
++#define PLLB_SETTINGS	0x10483F0E
++
++/* Switch MCK on PLLA output PCK = PLLA = 2 * MCK */
++#define MCKR_SETTINGS		(AT91C_PMC_PRES_CLK | AT91C_PMC_MDIV_2)
++#define MCKR_CSS_SETTINGS	(AT91C_PMC_CSS_PLLA_CLK | MCKR_SETTINGS)
++
++/* ******************************************************************* */
++/* NandFlash Settings                                                  */
++/*                                                                     */
++/* ******************************************************************* */
++#define AT91C_SMARTMEDIA_BASE	0x40000000
++
++#define AT91_SMART_MEDIA_ALE    (1 << 21)	/* our ALE is AD21 */
++#define AT91_SMART_MEDIA_CLE    (1 << 22)	/* our CLE is AD22 */
++
++#define NAND_DISABLE_CE() do { *(volatile unsigned int *)AT91C_PIOD_SODR = AT91C_PIO_PD15;} while(0)
++#define NAND_ENABLE_CE()  do { *(volatile unsigned int *)AT91C_PIOD_CODR = AT91C_PIO_PD15;} while(0)
++#define NAND_WAIT_READY() while (!(*(volatile unsigned int *)AT91C_PIOA_PDSR & AT91C_PIO_PA22))
++
++/* ******************************************************************* */
++/* SDRAMC Settings                                                     */
++/*                                                                     */
++/* ******************************************************************* */
++#define AT91C_BASE_SDRAMC 	AT91C_BASE_SDRAMC0
++#define AT91C_EBI_SDRAM		AT91C_EBI0_SDRAM
++
++/* ******************************************************************** */
++/* SMC Chip Select 3 Timings for NandFlash for MASTER_CLOCK = 90000000. */
++/* Please refer to SMC section in AT91SAM9x datasheet to learn how 	*/
++/* to generate these values. 						*/
++/* ******************************************************************** */
++#define AT91C_SM_NWE_SETUP	(1 << 0)
++#define AT91C_SM_NCS_WR_SETUP	(0 << 8)
++#define AT91C_SM_NRD_SETUP	(1 << 16)
++#define AT91C_SM_NCS_RD_SETUP	(0 << 24)
++  
++#define AT91C_SM_NWE_PULSE 	(3 << 0)
++#define AT91C_SM_NCS_WR_PULSE	(3 << 8)
++#define AT91C_SM_NRD_PULSE	(3 << 16)
++#define AT91C_SM_NCS_RD_PULSE	(3 << 24)
++  
++#define AT91C_SM_NWE_CYCLE 	(5 << 0)
++#define AT91C_SM_NRD_CYCLE	(5 << 16)
++
++#define AT91C_SM_TDF	        (2 << 16)
++
++/* ******************************************************************* */
++/* BootStrap Settings                                                  */
++/*                                                                     */
++/* ******************************************************************* */
++#define IMG_ADDRESS 	0x20000		/* Image Address in NandFlash */
++#define	IMG_SIZE	0x40000		/* Image Size in NandFlash    */
++
++#define MACH_TYPE       0x6AE  		/* USB-A9263 */
++#define JUMP_ADDR	0x23F00000	/* Final Jump Address 	      */
++
++/* ******************************************************************* */
++/* Application Settings                                                */
++/* ******************************************************************* */
++#undef CFG_DEBUG
++#undef CFG_DATAFLASH
++
++#define CFG_NANDFLASH
++#undef	NANDFLASH_SMALL_BLOCKS	/* NANDFLASH_LARGE_BLOCKS used instead */
++
++#define CFG_HW_INIT
++#define CFG_SDRAM
++
++
++#endif	/* _USB_A9263_H */
+diff --git a/board/usb_a9263/usb_a9263.c b/board/usb_a9263/usb_a9263.c
+new file mode 100644
+index 0000000..5630f99
+--- /dev/null
++++ b/board/usb_a9263/usb_a9263.c
+@@ -0,0 +1,285 @@
++/* ----------------------------------------------------------------------------
++ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
++ * ----------------------------------------------------------------------------
++ * Copyright (c) 2006, Atmel Corporation
++
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ *
++ * - Redistributions of source code must retain the above copyright notice,
++ * this list of conditions and the disclaiimer below.
++ *
++ * Atmel's name may not be used to endorse or promote products derived from
++ * this software without specific prior written permission.
++ *
++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ----------------------------------------------------------------------------
++ * File Name           : usb_a9263.c
++ * Object              :
++ * Creation            : GH Jun 28th 2012
++ *-----------------------------------------------------------------------------
++ */
++#include "../../include/part.h"
++#include "../../include/gpio.h"
++#include "../../include/pmc.h"
++#include "../../include/debug.h"
++#include "../../include/sdramc.h"
++#include "../../include/main.h"
++#ifdef CFG_NANDFLASH
++#include "../../include/nandflash.h"
++#endif
++#ifdef CFG_DATAFLASH
++#include "../../include/dataflash.h"
++#endif
++
++static inline unsigned int get_cp15(void)
++{
++	unsigned int value;
++	__asm__("mrc p15, 0, %0, c1, c0, 0" : "=r" (value));
++	return value;
++}
++
++static inline void set_cp15(unsigned int value)
++{
++	__asm__("mcr p15, 0, %0, c1, c0, 0" : : "r" (value));
++}
++
++
++#ifdef CFG_HW_INIT
++/*---------------------------------------------------------------------------- */
++/* \fn    hw_init							       */
++/* \brief This function performs very low level HW initialization	       */
++/* This function is invoked as soon as possible during the c_startup	       */
++/* The bss segment must be initialized					       */
++/*---------------------------------------------------------------------------- */
++void hw_init(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc hw_pio[] = {
++#ifdef CFG_DEBUG
++		{"RXD", AT91C_PIN_PC(30), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"TXD", AT91C_PIN_PC(31), 0, PIO_DEFAULT, PIO_PERIPH_A},
++#endif
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Disable watchdog */
++	writel(AT91C_WDTC_WDDIS, AT91C_BASE_WDTC + WDTC_WDMR);
++
++	/* At this stage the main oscillator is supposed to be enabled
++	 * PCK = MCK = MOSC */
++
++	/* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */
++	pmc_cfg_plla(PLLA_SETTINGS, PLL_LOCK_TIMEOUT);
++
++	/* PCK = PLLA = 2 * MCK */
++	pmc_cfg_mck(MCKR_SETTINGS, PLL_LOCK_TIMEOUT);
++	/* Switch MCK on PLLA output */
++	pmc_cfg_mck(MCKR_CSS_SETTINGS, PLL_LOCK_TIMEOUT);
++
++
++	/* Configure PLLB */
++	pmc_cfg_pllb(PLLB_SETTINGS, PLL_LOCK_TIMEOUT);
++
++	/* Configure the PIO controller to output PCK0 */
++	pio_setup(hw_pio);
++
++	/* Configure the EBI0 Slave Slot Cycle to 64 */
++	writel( (readl((AT91C_BASE_MATRIX + MATRIX_SCFG4)) & ~0xFF) | 0x40, (AT91C_BASE_MATRIX + MATRIX_SCFG4));
++
++#ifdef CFG_DEBUG
++	/* Enable Debug messages on the DBGU */
++	dbg_init(BAUDRATE(MASTER_CLOCK, 115200));
++	dbg_print("Start AT91Bootstrap...\n\r");
++#endif /* CFG_DEBUG */
++
++#ifdef CFG_SDRAM
++	/* Initialize the matrix */
++	/* VDDIOMSEL = 1 -> Memories are 3.3V powered */
++	writel(readl(AT91C_BASE_CCFG + CCFG_EBI0CSA) | (1 << 16) | AT91C_EBI_CS1A_SDRAMC, AT91C_BASE_CCFG + CCFG_EBI0CSA);
++
++	/* Configure SDRAM Controller */
++	sdram_init(	AT91C_SDRAMC_NC_9  |
++				AT91C_SDRAMC_NR_13 |
++				AT91C_SDRAMC_CAS_2 |
++				AT91C_SDRAMC_NB_4_BANKS |
++				AT91C_SDRAMC_DBW_32_BITS |
++				AT91C_SDRAMC_TWR_2 |
++				AT91C_SDRAMC_TRC_7 |
++				AT91C_SDRAMC_TRP_2 |
++				AT91C_SDRAMC_TRCD_2 |
++				AT91C_SDRAMC_TRAS_5 |
++				AT91C_SDRAMC_TXSR_8,		/* Control Register       */
++				(MASTER_CLOCK * 7)/1000000,	/* Refresh Timer Register */
++				AT91C_SDRAMC_MD_SDRAM);		/* SDRAM (no low power)   */ 
++#endif	/* CFG_SDRAM */
++}
++#endif /* CFG_HW_INIT */
++
++
++#ifdef CFG_SDRAM
++//*----------------------------------------------------------------------------
++//* \fn    sdramc_hw_init
++//* \brief This function performs SDRAMC HW initialization
++//*----------------------------------------------------------------------------*/
++void sdramc_hw_init(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc sdramc_pio[] = {
++		{"D16", AT91C_PIN_PD(16), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D17", AT91C_PIN_PD(17), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D18", AT91C_PIN_PD(18), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D19", AT91C_PIN_PD(19), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D20", AT91C_PIN_PD(20), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D21", AT91C_PIN_PD(21), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D22", AT91C_PIN_PD(22), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D23", AT91C_PIN_PD(23), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D24", AT91C_PIN_PD(24), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D25", AT91C_PIN_PD(25), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D26", AT91C_PIN_PD(26), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D27", AT91C_PIN_PD(27), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D28", AT91C_PIN_PD(28), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D29", AT91C_PIN_PD(29), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D30", AT91C_PIN_PD(30), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D31", AT91C_PIN_PD(31), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the SDRAMC PIO controller */
++	pio_setup(sdramc_pio);
++}
++#endif
++
++#ifdef CFG_DATAFLASH
++/*------------------------------------------------------------------------------*/
++/* \fn    df_recovery								*/
++/* \brief This function erases DataFlash Page 0 if USER PB is pressed 		*/
++/*        during boot sequence							*/
++/*------------------------------------------------------------------------------*/
++void df_recovery(AT91PS_DF pDf)
++{
++#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS0_DATAFLASH)
++	/* Configure PIOs */
++	const struct pio_desc usrpb_pio[] = {
++		{"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the PIO controller */
++	writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
++	pio_setup(usrpb_pio);
++	
++	/* If USER PB is pressed during Boot sequence */
++	/* Erase NandFlash block 0*/
++	if ( !pio_get_value(AT91C_PIN_PB(10)) )
++		df_page_erase(pDf, 0);
++#endif
++}
++/*------------------------------------------------------------------------------*/
++/* \fn    df_hw_init								*/
++/* \brief This function performs DataFlash HW initialization			*/
++/*------------------------------------------------------------------------------*/
++void df_hw_init(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc df_pio[] = {
++		{"MISO",  AT91C_PIN_PA(0), 0, PIO_DEFAULT, PIO_PERIPH_B},
++		{"MOSI",  AT91C_PIN_PA(1), 0, PIO_DEFAULT, PIO_PERIPH_B},
++		{"SPCK",  AT91C_PIN_PA(2), 0, PIO_DEFAULT, PIO_PERIPH_B},
++		{"NPCS0", AT91C_PIN_PA(5), 0, PIO_DEFAULT, PIO_PERIPH_B},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the PIO controller */
++	pio_setup(df_pio);
++}
++#endif /* CFG_DATAFLASH */
++
++
++#ifdef CFG_NANDFLASH
++/*------------------------------------------------------------------------------*/
++/* \fn    nand_recovery								*/
++/* \brief This function erases NandFlash Block 0 if USER PB is pressed 		*/
++/*        during boot sequence							*/
++/*------------------------------------------------------------------------------*/
++static void nand_recovery(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc usrpb_pio[] = {
++		{"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the PIO controller */
++	writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
++	pio_setup(usrpb_pio);
++	
++	/* If USER PB is pressed during Boot sequence */
++	/* Erase NandFlash block 0*/
++	if (!pio_get_value(AT91C_PIN_PB(10)) )
++		AT91F_NandEraseBlock0();
++}
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_hw_init							*/
++/* \brief NandFlash HW init							*/
++/*------------------------------------------------------------------------------*/
++void nandflash_hw_init(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc nand_pio[] = {
++		{"RDY_BSY", AT91C_PIN_PA(22), 0, PIO_PULLUP, PIO_INPUT},
++		{"NANDCS",  AT91C_PIN_PD(15), 0, PIO_PULLUP, PIO_OUTPUT},
++		{(char *) 0, 0, 0,  PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Setup Smart Media, first enable the address range of CS3 in HMATRIX user interface */
++	writel(readl(AT91C_BASE_CCFG + CCFG_EBI0CSA) | AT91C_EBI_CS3A_SM, AT91C_BASE_CCFG + CCFG_EBI0CSA);
++		    
++	/* Configure SMC CS3 */
++ 	writel((AT91C_SM_NWE_SETUP | AT91C_SM_NCS_WR_SETUP | AT91C_SM_NRD_SETUP | AT91C_SM_NCS_RD_SETUP), AT91C_BASE_SMC0 + SMC_SETUP3);
++  	writel((AT91C_SM_NWE_PULSE | AT91C_SM_NCS_WR_PULSE | AT91C_SM_NRD_PULSE | AT91C_SM_NCS_RD_PULSE), AT91C_BASE_SMC0 + SMC_PULSE3);
++	writel((AT91C_SM_NWE_CYCLE | AT91C_SM_NRD_CYCLE)						, AT91C_BASE_SMC0 + SMC_CYCLE3);
++	writel((AT91C_SMC_READMODE | AT91C_SMC_WRITEMODE | AT91C_SMC_NWAITM_NWAIT_DISABLE | 
++  		AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS | AT91C_SM_TDF)						, AT91C_BASE_SMC0 + SMC_CTRL3);
++
++	/* Configure the PIO controller */
++	writel((1 << AT91C_ID_PIOA), PMC_PCER + AT91C_BASE_PMC);
++	writel((1 << AT91C_ID_PIOCDE), PMC_PCER + AT91C_BASE_PMC);
++
++	pio_setup(nand_pio);
++
++	nand_recovery();
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_cfg_16bits_dbw_init						*/
++/* \brief Configure SMC in 16 bits mode						*/
++/*------------------------------------------------------------------------------*/
++void nandflash_cfg_16bits_dbw_init(void)
++{
++	writel(readl(AT91C_BASE_SMC0 + SMC_CTRL3) | AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS, AT91C_BASE_SMC0 + SMC_CTRL3);
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_cfg_8bits_dbw_init						*/
++/* \brief Configure SMC in 8 bits mode						*/
++/*------------------------------------------------------------------------------*/
++void nandflash_cfg_8bits_dbw_init(void)
++{
++	writel((readl(AT91C_BASE_SMC0 + SMC_CTRL3) & ~(AT91C_SMC_DBW)) | AT91C_SMC_DBW_WIDTH_EIGTH_BITS, AT91C_BASE_SMC0 + SMC_CTRL3);
++}
++
++#endif /* #ifdef CFG_NANDFLASH */
++
++
+diff --git a/crt0_gnu.S b/crt0_gnu.S
+index 042b617..002feef 100644
+--- a/crt0_gnu.S
++++ b/crt0_gnu.S
+@@ -106,6 +106,13 @@ _relocate_to_sram:
+ #endif /* CFG_NORFLASH */
+ 
+ _setup_clocks:
++/* Test if main osc is bypassed */
++	ldr 	r0,=AT91C_PMC_MOR
++	ldr 	r1, [r0]
++	ldr 	r2,=AT91C_CKGR_OSCBYPASS 
++	ands 	r1, r1, r2
++	bne	_init_data	/* branch if OSCBYPASS=1 */
++
+ /* Test if main oscillator is enabled */
+ 	ldr 	r0,=AT91C_PMC_SR
+ 	ldr 	r1, [r0]
+diff --git a/driver/dataflash.c b/driver/dataflash.c
+index e28e49e..4de295a 100644
+--- a/driver/dataflash.c
++++ b/driver/dataflash.c
+@@ -293,14 +293,14 @@ static int df_init (AT91PS_DF pDf)
+ 			pDf->dfDescription.pages_size = 264;
+ 			pDf->dfDescription.page_offset = 9;
+ 			break;
+-
++*/
+ 		case AT45DB021B:
+ 			pDf->dfDescription.pages_number = 1024;
+ 			pDf->dfDescription.pages_size = 264;
+ 			pDf->dfDescription.page_offset = 9;
+ 			break;
+ 
+-		case AT45DB041B:
++/*		case AT45DB041B:
+ 			pDf->dfDescription.pages_number = 2048;
+ 			pDf->dfDescription.pages_size = 264;
+ 			pDf->dfDescription.page_offset = 9;
+@@ -373,7 +373,7 @@ int load_df(unsigned int pcs, unsigned int img_addr, unsigned int img_size, unsi
+     if (!df_init(pDf))
+         return -1;
+ 
+-#if defined(AT91SAM9260) || defined(AT91SAM9XE) || defined(AT91SAM9G20)
++#if defined(AT91SAM9260) || defined(AT91SAM9263) || defined(AT91SAM9XE) || defined(AT91SAM9G20)
+     /* Test if a button has been pressed or not */
+     /* Erase Page 0 to avoid infinite loop */
+     df_recovery(pDf);
+diff --git a/include/part.h b/include/part.h
+index ba5985a..a1863d0 100644
+--- a/include/part.h
++++ b/include/part.h
+@@ -61,7 +61,11 @@
+ 
+ #ifdef AT91SAM9263
+ #include "AT91SAM9263_inc.h"
+-#include "at91sam9263ek.h"
++	#ifdef at91sam9263ek
++	#include "at91sam9263ek.h"
++	#elif usb_a9263
++	#include "usb-a9263.h"
++	#endif
+ #endif
+ 
+ #ifdef AT91CAP9
+-- 
+1.5.6.3
+

board/calao/usb-a9263/linux-3.4.4.config

@@ -0,0 +1,102 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_AT91=y
+CONFIG_ARCH_AT91SAM9263=y
+CONFIG_MACH_USB_A9263=y
+CONFIG_AT91_SLOW_CLOCK=y
+# CONFIG_ARM_THUMB is not set
+CONFIG_AEABI=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
+CONFIG_FPE_NWFPE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_SPI=y
+CONFIG_SPI_ATMEL=y
+# CONFIG_HWMON is not set
+# CONFIG_USB_HID is not set
+CONFIG_USB=y
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_MON=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_EXT2_FS=y
+CONFIG_FUSE_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_XATTR=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_LL=y

board/calao/usb-a9g20-lpw/at91bootstrap-1.16-usb-a9g20-lpw.patch

@@ -0,0 +1,610 @@
+From 8d84757d5170969e8bdfebc7951f43c5aa2b05fd Mon Sep 17 00:00:00 2001
+From: Gregory Hermant <gregory.hermant@calao-systems.com>
+Date: Fri, 6 Jul 2012 16:32:47 +0200
+Subject: [PATCH] Add support for the Calao-systems USB-A9G20-LPW
+
+
+Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
+---
+ board/usb_a9g20_lpw/nandflash/Makefile        |  121 ++++++++++
+ board/usb_a9g20_lpw/nandflash/usb-a9g20-lpw.h |  112 +++++++++
+ board/usb_a9g20_lpw/usb_a9g20_lpw.c           |  303 +++++++++++++++++++++++++
+ crt0_gnu.S                                    |    7 +
+ include/part.h                                |    6 +-
+ 5 files changed, 548 insertions(+), 1 deletions(-)
+ create mode 100644 board/usb_a9g20_lpw/nandflash/Makefile
+ create mode 100644 board/usb_a9g20_lpw/nandflash/usb-a9g20-lpw.h
+ create mode 100644 board/usb_a9g20_lpw/usb_a9g20_lpw.c
+
+diff --git a/board/usb_a9g20_lpw/nandflash/Makefile b/board/usb_a9g20_lpw/nandflash/Makefile
+new file mode 100644
+index 0000000..8c9d99a
+--- /dev/null
++++ b/board/usb_a9g20_lpw/nandflash/Makefile
+@@ -0,0 +1,121 @@
++# TODO: set this appropriately for your local toolchain
++ifndef ERASE_FCT
++ERASE_FCT=rm -f
++endif
++ifndef CROSS_COMPILE
++CROSS_COMPILE=arm-elf-
++endif
++
++TOOLCHAIN=gcc
++
++BOOTSTRAP_PATH=../../..
++
++# NandFlashBoot Configuration for USB-A9G20-LPW
++
++# Target name (case sensitive!!!)
++TARGET=AT91SAM9G20
++# Board name (case sensitive!!!)
++BOARD=usb_a9g20_lpw
++# Link Address and Top_of_Memory
++LINK_ADDR=0x200000
++TOP_OF_MEMORY=0x301000
++# Name of current directory
++PROJECT=nandflash
++
++ifndef BOOT_NAME
++BOOT_NAME=$(PROJECT)_$(BOARD)
++endif
++
++INCL=./$(BOOTSTRAP_PATH)/board/$(BOARD)/$(PROJECT)
++
++ifeq ($(TOOLCHAIN), gcc)
++
++AS=$(CROSS_COMPILE)gcc
++CC=$(CROSS_COMPILE)gcc
++LD=$(CROSS_COMPILE)gcc
++NM= $(CROSS_COMPILE)nm
++SIZE=$(CROSS_COMPILE)size
++OBJCOPY=$(CROSS_COMPILE)objcopy
++OBJDUMP=$(CROSS_COMPILE)objdump
++CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL)
++ASFLAGS=-g -mcpu=arm926ej-s -c -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
++
++# Linker flags.
++#  -Wl,...:     tell GCC to pass this to linker.
++#    -Map:      create map file
++#    --cref:    add cross reference to map file
++LDFLAGS+=-nostartfiles -nostdlib -Wl,-Map=$(BOOT_NAME).map,--cref
++LDFLAGS+=-T $(BOOTSTRAP_PATH)/elf32-littlearm.lds -Ttext $(LINK_ADDR)
++OBJS=crt0_gnu.o
++
++endif
++
++OBJS+=\
++	$(BOARD).o \
++	main.o \
++	gpio.o \
++	pmc.o \
++	debug.o \
++	sdramc.o \
++	nandflash.o \
++	_udivsi3.o \
++	_umodsi3.o \
++	div0.o \
++	udiv.o \
++	string.o
++
++rebuild: clean all
++
++all: 	$(BOOT_NAME)
++
++ifeq ($(TOOLCHAIN), gcc)
++$(BOOT_NAME): $(OBJS)
++	$(LD) $(LDFLAGS) -n -o $(BOOT_NAME).elf $(OBJS)
++	$(OBJCOPY) --strip-debug --strip-unneeded $(BOOT_NAME).elf -O binary $(BOOT_NAME).bin
++endif
++
++
++$(BOARD).o: $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c -o $(BOARD).o
++
++main.o: $(BOOTSTRAP_PATH)/main.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/main.c -o main.o
++
++gpio.o: $(BOOTSTRAP_PATH)/driver/gpio.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/gpio.c -o gpio.o
++
++pmc.o:  $(BOOTSTRAP_PATH)/driver/pmc.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/pmc.c -o pmc.o
++
++debug.o: $(BOOTSTRAP_PATH)/driver/debug.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/debug.c -o debug.o
++
++sdramc.o:  $(BOOTSTRAP_PATH)/driver/sdramc.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/sdramc.c -o sdramc.o
++
++dataflash.o:  $(BOOTSTRAP_PATH)/driver/dataflash.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/dataflash.c -o dataflash.o
++
++nandflash.o:  $(BOOTSTRAP_PATH)/driver/nandflash.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/nandflash.c -o nandflash.o
++
++crt0_gnu.o:  $(BOOTSTRAP_PATH)/crt0_gnu.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/crt0_gnu.S -o crt0_gnu.o
++
++div0.o:  $(BOOTSTRAP_PATH)/lib/div0.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/div0.c -o div0.o
++
++string.o:  $(BOOTSTRAP_PATH)/lib/string.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/string.c -o string.o
++
++udiv.o:  $(BOOTSTRAP_PATH)/lib/udiv.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/udiv.c -o udiv.o
++
++_udivsi3.o:  $(BOOTSTRAP_PATH)/lib/_udivsi3.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_udivsi3.S -o _udivsi3.o
++
++_umodsi3.o:  $(BOOTSTRAP_PATH)/lib/_umodsi3.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_umodsi3.S -o _umodsi3.o
++
++clean:
++	$(ERASE_FCT) *.o *.bin *.elf *.map
+diff --git a/board/usb_a9g20_lpw/nandflash/usb-a9g20-lpw.h b/board/usb_a9g20_lpw/nandflash/usb-a9g20-lpw.h
+new file mode 100644
+index 0000000..c0bdc6e
+--- /dev/null
++++ b/board/usb_a9g20_lpw/nandflash/usb-a9g20-lpw.h
+@@ -0,0 +1,112 @@
++/* ----------------------------------------------------------------------------
++ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
++ * ----------------------------------------------------------------------------
++ * Copyright (c) 2008, Atmel Corporation
++
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ *
++ * - Redistributions of source code must retain the above copyright notice,
++ * this list of conditions and the disclaimer below.
++ *
++ * Atmel's name may not be used to endorse or promote products derived from
++ * this software without specific prior written permission.
++ *
++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ----------------------------------------------------------------------------
++ * File Name           : usb-a9g20-lpw.h
++ * Object              :
++ * Creation            : GH July 6th 2012
++ *-----------------------------------------------------------------------------
++ */
++#ifndef _USB_A9G20_LPW_H
++#define _USB_A9G20_LPW_H
++
++/* ******************************************************************* */
++/* PMC Settings                                                        */
++/*                                                                     */
++/* The main oscillator is enabled as soon as possible in the c_startup */
++/* and MCK is switched on the main oscillator.                         */
++/* PLL initialization is done later in the hw_init() function          */
++/* ******************************************************************* */
++#define MASTER_CLOCK		(133000000)
++#define PLL_LOCK_TIMEOUT	1000000
++
++/* Set PLLA to 798Mhz */
++#define PLLA_SETTINGS	0x20843F02
++#define PLLB_SETTINGS	0x100F3F02
++
++/* Switch MCK on PLLA output PCK = PLLA/2 = 3 * MCK */
++#define MCKR_SETTINGS		0x1300
++#define MCKR_CSS_SETTINGS	(AT91C_PMC_CSS_PLLA_CLK | MCKR_SETTINGS)
++
++/* ******************************************************************* */
++/* NandFlash Settings                                                  */
++/*                                                                     */
++/* ******************************************************************* */
++#define AT91C_SMARTMEDIA_BASE	0x40000000
++
++#define AT91_SMART_MEDIA_ALE    (1 << 21)	/* our ALE is AD21 */
++#define AT91_SMART_MEDIA_CLE    (1 << 22)	/* our CLE is AD22 */
++
++#define NAND_DISABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_SODR = AT91C_PIO_PC14;} while(0)
++#define NAND_ENABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_CODR = AT91C_PIO_PC14;} while(0)
++
++#define NAND_WAIT_READY() while (!(*(volatile unsigned int *)AT91C_PIOC_PDSR & AT91C_PIO_PC13))
++
++
++/* ******************************************************************** */
++/* SMC Chip Select 3 Timings for NandFlash for MASTER_CLOCK = 133000000.*/
++/* Please refer to SMC section in AT91SAM9 datasheet to learn how 	*/
++/* to generate these values. 						*/
++/* ******************************************************************** */
++#define AT91C_SM_NWE_SETUP	(2 << 0)
++#define AT91C_SM_NCS_WR_SETUP	(0 << 8)
++#define AT91C_SM_NRD_SETUP	(2 << 16)
++#define AT91C_SM_NCS_RD_SETUP	(0 << 24)
++  
++#define AT91C_SM_NWE_PULSE 	(4 << 0)
++#define AT91C_SM_NCS_WR_PULSE	(4 << 8)
++#define AT91C_SM_NRD_PULSE	(4 << 16)
++#define AT91C_SM_NCS_RD_PULSE	(4 << 24)
++  
++#define AT91C_SM_NWE_CYCLE 	(7 << 0)
++#define AT91C_SM_NRD_CYCLE	(7 << 16)
++
++#define AT91C_SM_TDF	        (3 << 16)
++
++/* ******************************************************************* */
++/* BootStrap Settings                                                  */
++/*                                                                     */
++/* ******************************************************************* */
++#define IMG_ADDRESS 		0x20000			/* Image Address in NandFlash */
++#define	IMG_SIZE		0x40000			/* Image Size in NandFlash */
++
++#define MACH_TYPE		0x731			/* USB-A9G20 */
++#define JUMP_ADDR		0x23F00000		/* Final Jump Address */
++
++/* ******************************************************************* */
++/* Application Settings                                                */
++/* ******************************************************************* */
++#undef CFG_DEBUG
++#undef CFG_DATAFLASH
++
++#define CFG_NANDFLASH
++#undef	NANDFLASH_SMALL_BLOCKS	/* NANDFLASH_LARGE_BLOCKS used instead */
++#undef  CFG_NANDFLASH_RECOVERY
++
++#define	CFG_SDRAM
++#define	CFG_HW_INIT
++
++#endif	/* _USB_A9G20_LPW_H */
+diff --git a/board/usb_a9g20_lpw/usb_a9g20_lpw.c b/board/usb_a9g20_lpw/usb_a9g20_lpw.c
+new file mode 100644
+index 0000000..c372307
+--- /dev/null
++++ b/board/usb_a9g20_lpw/usb_a9g20_lpw.c
+@@ -0,0 +1,303 @@
++/* ----------------------------------------------------------------------------
++ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
++ * ----------------------------------------------------------------------------
++ * Copyright (c) 2008, Atmel Corporation
++
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ *
++ * - Redistributions of source code must retain the above copyright notice,
++ * this list of conditions and the disclaimer below.
++ *
++ * Atmel's name may not be used to endorse or promote products derived from
++ * this software without specific prior written permission.
++ *
++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ----------------------------------------------------------------------------
++ * File Name           : usb_a9g20_lpw.c
++ * Object              :
++ * Creation            : GH July 6th 2012
++ *-----------------------------------------------------------------------------
++ */
++#include "../../include/part.h"
++#include "../../include/gpio.h"
++#include "../../include/pmc.h"
++#include "../../include/debug.h"
++#include "../../include/sdramc.h"
++#include "../../include/main.h"
++#ifdef CFG_NANDFLASH
++#include "../../include/nandflash.h"
++#endif
++#ifdef CFG_DATAFLASH
++#include "../../include/dataflash.h"
++#endif
++
++static inline unsigned int get_cp15(void)
++{
++	unsigned int value;
++	__asm__("mrc p15, 0, %0, c1, c0, 0" : "=r" (value));
++	return value;
++}
++
++static inline void set_cp15(unsigned int value)
++{
++	__asm__("mcr p15, 0, %0, c1, c0, 0" : : "r" (value));
++}
++
++#ifdef CFG_HW_INIT
++/*----------------------------------------------------------------------------*/
++/* \fn    hw_init							      */
++/* \brief This function performs very low level HW initialization	      */
++/* This function is invoked as soon as possible during the c_startup	      */
++/* The bss segment must be initialized					      */
++/*----------------------------------------------------------------------------*/
++void hw_init(void)
++{
++	unsigned int cp15;
++	
++	/* Configure PIOs */
++	const struct pio_desc hw_pio[] = {
++#ifdef CFG_DEBUG
++		{"RXD", AT91C_PIN_PB(14), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"TXD", AT91C_PIN_PB(15), 0, PIO_DEFAULT, PIO_PERIPH_A},
++#endif
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Disable watchdog */
++	writel(AT91C_WDTC_WDDIS, AT91C_BASE_WDTC + WDTC_WDMR);
++
++	/* At this stage the main oscillator is supposed to be enabled
++	 * PCK = MCK = MOSC */
++	writel(0x00, AT91C_BASE_PMC + PMC_PLLICPR);
++
++	/* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */
++	pmc_cfg_plla(PLLA_SETTINGS, PLL_LOCK_TIMEOUT);
++
++	/* PCK = PLLA/2 = 3 * MCK */
++	pmc_cfg_mck(MCKR_SETTINGS, PLL_LOCK_TIMEOUT);
++	/* Switch MCK on PLLA output */
++	pmc_cfg_mck(MCKR_CSS_SETTINGS, PLL_LOCK_TIMEOUT);
++
++	/* Configure PLLB */
++	pmc_cfg_pllb(PLLB_SETTINGS, PLL_LOCK_TIMEOUT);
++
++	/* Configure CP15 */
++	cp15 = get_cp15();
++	cp15 |= I_CACHE;
++	set_cp15(cp15);
++
++	/* Configure the PIO controller */
++	pio_setup(hw_pio);
++
++	/* Configure the EBI Slave Slot Cycle to 64 */
++	writel((readl((AT91C_BASE_MATRIX + MATRIX_SCFG3)) & ~0xFF) | 0x40, (AT91C_BASE_MATRIX + MATRIX_SCFG3));
++
++#ifdef CFG_DEBUG
++	/* Enable Debug messages on the DBGU */
++	dbg_init(BAUDRATE(MASTER_CLOCK, 115200));
++
++	dbg_print("Start AT91Bootstrap...\n\r");
++#endif /* CFG_DEBUG */
++
++#ifdef CFG_SDRAM
++	/* Initialize the matrix (VDDIOSEL=0: memory voltage = 1.8V ) */
++	writel((readl(AT91C_BASE_CCFG + CCFG_EBICSA) & ~0x00010000) | AT91C_EBI_CS1A_SDRAMC , AT91C_BASE_CCFG + CCFG_EBICSA);
++
++	/* Configure SDRAM Controller */
++	sdram_init(	AT91C_SDRAMC_NC_9  |
++				AT91C_SDRAMC_NR_13 |
++				AT91C_SDRAMC_CAS_3 |
++				AT91C_SDRAMC_NB_4_BANKS |
++				AT91C_SDRAMC_DBW_32_BITS |
++				AT91C_SDRAMC_TWR_3 |
++				AT91C_SDRAMC_TRC_9 |
++				AT91C_SDRAMC_TRP_3 |
++				AT91C_SDRAMC_TRCD_3 |
++				AT91C_SDRAMC_TRAS_6 |
++				AT91C_SDRAMC_TXSR_10,		/* Control Register */
++				(MASTER_CLOCK * 7)/1000000,	/* Refresh Timer Register */
++                                AT91C_SDRAMC_MD_SDRAM);         /* SDRAM (no low power)   */
++
++#endif /* CFG_SDRAM */
++}
++#endif /* CFG_HW_INIT */
++
++#ifdef CFG_SDRAM
++/*------------------------------------------------------------------------------*/
++/* \fn    sdramc_hw_init							*/
++/* \brief This function performs SDRAMC HW initialization			*/
++/*------------------------------------------------------------------------------*/
++void sdramc_hw_init(void)
++{
++	/* Configure PIOs */
++/*	const struct pio_desc sdramc_pio[] = {
++		{"D16", AT91C_PIN_PC(16), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D17", AT91C_PIN_PC(17), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D18", AT91C_PIN_PC(18), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D19", AT91C_PIN_PC(19), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D20", AT91C_PIN_PC(20), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D21", AT91C_PIN_PC(21), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D22", AT91C_PIN_PC(22), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D23", AT91C_PIN_PC(23), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D24", AT91C_PIN_PC(24), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D25", AT91C_PIN_PC(25), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D26", AT91C_PIN_PC(26), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D27", AT91C_PIN_PC(27), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D28", AT91C_PIN_PC(28), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D29", AT91C_PIN_PC(29), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D30", AT91C_PIN_PC(30), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D31", AT91C_PIN_PC(31), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++*/
++	/* Configure the SDRAMC PIO controller to output PCK0 */
++/*	pio_setup(sdramc_pio); */
++
++	writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_ASR(0));
++	writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_PDR(0));
++
++}
++#endif /* CFG_SDRAM */
++
++#ifdef CFG_DATAFLASH
++
++/*------------------------------------------------------------------------------*/
++/* \fn    df_recovery								*/
++/* \brief This function erases DataFlash Page 0 if USR PB is pressed 		*/
++/*        during boot sequence							*/
++/*------------------------------------------------------------------------------*/
++void df_recovery(AT91PS_DF pDf)
++{
++#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS1_DATAFLASH)
++	/* Configure PIOs */
++	const struct pio_desc usrpb[] = {
++		{"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the PIO controller */
++	writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
++	pio_setup(usrpb);
++	
++	/* If USR PB is pressed during Boot sequence */
++	/* Erase NandFlash block 0*/
++	if ( !pio_get_value(AT91C_PIN_PB(10)) )
++		df_page_erase(pDf, 0);
++#endif
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    df_hw_init								*/
++/* \brief This function performs DataFlash HW initialization			*/
++/*------------------------------------------------------------------------------*/
++void df_hw_init(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc df_pio[] = {
++		{"MISO",  AT91C_PIN_PA(0), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"MOSI",  AT91C_PIN_PA(1), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"SPCK",  AT91C_PIN_PA(2), 0, PIO_DEFAULT, PIO_PERIPH_A},
++#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS0_DATAFLASH)
++		{"NPCS0", AT91C_PIN_PA(3), 0, PIO_DEFAULT, PIO_PERIPH_A},
++#endif
++#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS1_DATAFLASH)
++		{"NPCS1", AT91C_PIN_PC(11), 0, PIO_DEFAULT, PIO_PERIPH_B},
++#endif
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the PIO controller */
++	pio_setup(df_pio);
++}
++#endif /* CFG_DATAFLASH */
++
++
++
++#ifdef CFG_NANDFLASH
++/*------------------------------------------------------------------------------*/
++/* \fn    nand_recovery						*/
++/* \brief This function erases NandFlash Block 0 if USER PB is pressed 		*/
++/*        during boot sequence							*/
++/*------------------------------------------------------------------------------*/
++#ifdef CFG_NANDFLASH_RECOVERY
++static void nand_recovery(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc usrpb[] = {
++		{"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the PIO controller */
++	writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
++	pio_setup(usrpb);
++	
++	/* If USER PB is pressed during Boot sequence */
++	/* Erase NandFlash block 0*/
++	if (!pio_get_value(AT91C_PIN_PB(10)) )
++		AT91F_NandEraseBlock0();
++}
++#else
++static void nand_recovery(void) {}
++#endif
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_hw_init							*/
++/* \brief NandFlash HW init							*/
++/*------------------------------------------------------------------------------*/
++void nandflash_hw_init(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc nand_pio[] = {
++		{"RDY_BSY", AT91C_PIN_PC(13), 0, PIO_PULLUP, PIO_INPUT},
++		{"NANDCS",  AT91C_PIN_PC(14), 0, PIO_PULLUP, PIO_OUTPUT},
++		{(char *) 0, 0, 0,  PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Setup Smart Media, first enable the address range of CS3 in HMATRIX user interface */
++	writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) | AT91C_EBI_CS3A_SM, AT91C_BASE_CCFG + CCFG_EBICSA);
++		    
++	/* Configure SMC CS3 */
++ 	writel((AT91C_SM_NWE_SETUP | AT91C_SM_NCS_WR_SETUP | AT91C_SM_NRD_SETUP | AT91C_SM_NCS_RD_SETUP), AT91C_BASE_SMC + SMC_SETUP3);
++  	writel((AT91C_SM_NWE_PULSE | AT91C_SM_NCS_WR_PULSE | AT91C_SM_NRD_PULSE | AT91C_SM_NCS_RD_PULSE), AT91C_BASE_SMC + SMC_PULSE3);
++	writel((AT91C_SM_NWE_CYCLE | AT91C_SM_NRD_CYCLE)						, AT91C_BASE_SMC + SMC_CYCLE3);
++	writel((AT91C_SMC_READMODE | AT91C_SMC_WRITEMODE | AT91C_SMC_NWAITM_NWAIT_DISABLE | 
++  		AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS | AT91C_SM_TDF)						, AT91C_BASE_SMC + SMC_CTRL3);
++
++	/* Configure the PIO controller */
++	writel((1 << AT91C_ID_PIOC), PMC_PCER + AT91C_BASE_PMC);
++	pio_setup(nand_pio);
++	
++	nand_recovery();
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_cfg_16bits_dbw_init						*/
++/* \brief Configure SMC in 16 bits mode						*/
++/*------------------------------------------------------------------------------*/
++void nandflash_cfg_16bits_dbw_init(void)
++{
++	writel(readl(AT91C_BASE_SMC + SMC_CTRL3) | AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS, AT91C_BASE_SMC + SMC_CTRL3);
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_cfg_8bits_dbw_init						*/
++/* \brief Configure SMC in 8 bits mode						*/
++/*------------------------------------------------------------------------------*/
++void nandflash_cfg_8bits_dbw_init(void)
++{
++	writel((readl(AT91C_BASE_SMC + SMC_CTRL3) & ~(AT91C_SMC_DBW)) | AT91C_SMC_DBW_WIDTH_EIGTH_BITS, AT91C_BASE_SMC + SMC_CTRL3);
++}
++
++#endif /* #ifdef CFG_NANDFLASH */
+diff --git a/crt0_gnu.S b/crt0_gnu.S
+index 042b617..002feef 100644
+--- a/crt0_gnu.S
++++ b/crt0_gnu.S
+@@ -106,6 +106,13 @@ _relocate_to_sram:
+ #endif /* CFG_NORFLASH */
+ 
+ _setup_clocks:
++/* Test if main osc is bypassed */
++	ldr 	r0,=AT91C_PMC_MOR
++	ldr 	r1, [r0]
++	ldr 	r2,=AT91C_CKGR_OSCBYPASS 
++	ands 	r1, r1, r2
++	bne	_init_data	/* branch if OSCBYPASS=1 */
++
+ /* Test if main oscillator is enabled */
+ 	ldr 	r0,=AT91C_PMC_SR
+ 	ldr 	r1, [r0]
+diff --git a/include/part.h b/include/part.h
+index ba5985a..1d7392a 100644
+--- a/include/part.h
++++ b/include/part.h
+@@ -46,7 +46,11 @@
+ 
+ #ifdef AT91SAM9G20
+ #include "AT91SAM9260_inc.h"
+-#include "at91sam9g20ek.h"
++	#ifdef at91sam9g20ek
++	#include "at91sam9g20ek.h"
++	#elif usb_a9g20_lpw
++	#include "usb-a9g20-lpw.h"
++	#endif
+ #endif
+ 
+ #ifdef AT91SAM9261
+-- 
+1.5.6.3
+

board/calao/usb-a9g20-lpw/barebox-2012.07.0-usb-a9g20-lpw.patch

@@ -0,0 +1,12 @@
+diff --git a/arch/arm/configs/usb_a9g20_defconfig b/arch/arm/configs/usb_a9g20_defconfig
+index 30bf380..7716e0e 100644
+--- a/arch/arm/configs/usb_a9g20_defconfig
++++ b/arch/arm/configs/usb_a9g20_defconfig
+@@ -15,6 +15,7 @@ CONFIG_HUSH_FANCY_PROMPT=y
+ CONFIG_CMDLINE_EDITING=y
+ CONFIG_AUTO_COMPLETE=y
+ CONFIG_MENU=y
++# CONFIG_ERRNO_MESSAGES is not set
+ # CONFIG_CONSOLE_ACTIVATE_FIRST is not set
+ CONFIG_CONSOLE_ACTIVATE_ALL=y
+ CONFIG_PARTITION=y

board/calao/usb-a9g20-lpw/linux-3.4.4.config

@@ -0,0 +1,105 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_AT91=y
+CONFIG_ARCH_AT91SAM9G20=y
+CONFIG_MACH_USB_A9G20=y
+CONFIG_AT91_SLOW_CLOCK=y
+# CONFIG_ARM_THUMB is not set
+CONFIG_AEABI=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
+CONFIG_FPE_NWFPE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_GPIO=y
+CONFIG_SPI=y
+CONFIG_SPI_ATMEL=y
+# CONFIG_HWMON is not set
+# CONFIG_USB_HID is not set
+CONFIG_USB=y
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_MON=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_RV3029C2=y
+CONFIG_EXT2_FS=y
+CONFIG_FUSE_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_XATTR=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_LL=y

board/chromebook/snow/kernel.args

@@ -1 +0,0 @@
-console=tty1 clk_ignore_unused root=/dev/mmcblk1p2 rootfstype=ext4 ro

board/chromebook/snow/kernel.its

@@ -1,37 +0,0 @@
-/dts-v1/;
-
-/ {
-    description = "Buildroot kernel for Chromebook Snow";
-    images {
-        kernel@1 {
-            description = "kernel";
-            data = /incbin/("zImage");
-            type = "kernel_noload";
-            arch = "arm";
-            os = "linux";
-            compression = "none";
-            load = <0>;
-            entry = <0>;
-            hash@1 {
-                algo = "sha1";
-            };
-        };
-        fdt@1{
-            description = "exynos5250-snow.dtb";
-            data = /incbin/("exynos5250-snow.dtb");
-            type = "flat_dt";
-            arch = "arm";
-            compression = "none";
-            hash@1 {
-                algo = "sha1";
-            };
-        };
-    };
-    configurations {
-        default = "conf@1";
-        conf@1{
-            kernel = "kernel@1";
-            fdt = "fdt@1";
-        };
-    };
-};

board/chromebook/snow/linux-4.6-dts-tpm.patch

@@ -1,27 +0,0 @@
-Some versions of u-boot for this Chromebook check for tpm node
-in the device tree and fail badly (reboot) if it is not found.
-
-While not exactly correct, it is much easier to patch the mainline
-device tree to match u-boot expectations than to fix u-boot on
-this device.
-
-See https://code.google.com/p/chromium/issues/detail?id=220169
-and https://lkml.org/lkml/2013/3/4/242
-
-Signed-off-by: Alex Suykov <alex.suykov@gmail.com>
-
---- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi
-+++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
-@@ -466,6 +466,11 @@
- 	status = "okay";
- 	samsung,i2c-sda-delay = <100>;
- 	samsung,i2c-max-bus-freq = <66000>;
-+
-+	tpm {
-+		compatible = "infineon,slb9635tt";
-+		reg = <0x20>;
-+	};
- };
- 
- &i2c_5 {
-

board/chromebook/snow/linux-4.6.fragment

@@ -1,2 +0,0 @@
-CONFIG_MWIFIEX=m
-CONFIG_MWIFIEX_SDIO=m

board/chromebook/snow/mksd.sh

@@ -1,69 +0,0 @@
-#!/bin/sh
-
-# This scripts makes a minimal bootable SD card image for the Chromebook.
-# The resulting file is called bootsd.img. It should be written directly
-# to the card:
-#
-#	SD=/dev/mmcblk1		# check your device name!
-#	dd if=output/images/bootsd.img of=$SD
-#
-# The partitions are created just large enough to hold the kernel and
-# the rootfs image. Most of the card will be empty, and the secondary
-# GPT will not be in its proper location.
-
-# cgpt does not create protective MBR, and the kernel refuses to read
-# GPT unless there's some kind of MBR in sector 0. So we need parted
-# to write that single sector before doing anything with the GPT.
-cgpt=$HOST_DIR/usr/bin/cgpt
-parted=$HOST_DIR/usr/sbin/parted
-kernel=$BINARIES_DIR/uImage.kpart
-rootfs=$BINARIES_DIR/rootfs.ext2
-
-run() { echo "$@"; "$@"; }
-die() { echo "$@" >&2; exit 1; }
-test -f $kernel || die "No kernel image found"
-test -f $rootfs || die "No rootfs image found"
-test -x $cgpt || die "cgpt not found (host-vboot-utils have not been built?)"
-
-# True file sizes in bytes
-kernelsize=`stat -t $kernel | cut -d\  -f2`
-rootfssize=`stat -t $rootfs | cut -d\  -f2`
-
-# The card is partitioned in sectors of 8KB.
-# 4 sectors are reserved for MBR+GPT. Their actual size turns out
-# to be 33 512-blocks which is just over 2 sectors, but we align
-# it to a nice round number.
-sec=8192
-kernelsec=$(((kernelsize+8191)>>13))
-rootfssec=$(((rootfssize+8191)>>13))
-headersec=4
-
-# There is also a copy of MBR+GPT at the end of the image.
-# It's going to be useless but both tools assume it's there.
-imagesec=$((2*headersec+kernelsec+rootfssec))
-bootsd="$BINARIES_DIR/bootsd.img"
-run dd bs=$sec count=$imagesec if=/dev/zero of=$bootsd
-
-# cgpt needs offsets and sizes in 512-blocks.
-block=512
-kernelstart=$((headersec<<4))
-kernelblocks=$((kernelsec<<4))
-rootfsblocks=$((rootfssec<<4))
-rootfsstart=$((kernelstart+kernelblocks))
-
-# This command initializes both GPT and MBR
-run $parted -s $bootsd mklabel gpt
-
-# The kernel partition must be marked as bootable, that's why -S -T -P
-run $cgpt add -i 1 -b $kernelstart -s $kernelblocks \
-	-t kernel -l kernel \
-	-S 1 -T 1 -P 10 $bootsd
-
-# It does not really matter where the rootfs partition is located as long
-# as the kernel can find it.
-# However, if anything is changed here, kernel.args must be updated as well.
-run $cgpt add -i 2 -b $rootfsstart -s $rootfsblocks \
-	-t data -l rootfs $bootsd
-
-run dd bs=$block if=$kernel of=$bootsd seek=$kernelstart
-run dd bs=$block if=$rootfs of=$bootsd seek=$rootfsstart

board/chromebook/snow/readme.txt

@@ -1,137 +0,0 @@
-Samsung XE303C12 aka Chromebook Snow
-====================================
-
-This file describes booting the Chromebook from an SD card containing
-Buildroot kernel and rootfs, using the original bootloader. This is
-the least invasive way to get Buildroot onto the devices and a good
-starting point.
-
-The bootloader will only boot a kernel from a GPT partition marked
-bootable with cgpt tool from vboot-utils package.
-The kernel image must be signed using futility from the same package.
-The signing part is done by sign.sh script in this directory.
-
-It does not really matter where rootfs is as long as the kernel is able
-to find it, but this particular configuration assumes the kernel is on
-partition 1 and rootfs is on partition 2 of the SD card.
-Make sure to check kernel.args if you change this.
-
-Making the boot media
----------------------
-Start by configuring and building the images.
-
-	make chromebook_snow_defconfig
-	make menuconfig # if necessary
-	make
-
-The important files are:
-
-	uImage.kpart (kernel and device tree, signed)
-	rootfs.tar
-	bootsd.img (SD card image containing both kernel and rootfs)
-
-Write the image directly to some SD card.
-WARNING: make sure there is nothing important on that card,
-and double-check the device name!
-
-	SD=/dev/mmcblk1		# may be /dev/sdX on some hosts
-	dd if=output/images/bootsd.img of=$SD
-
-Switching to developer mode and booting from SD
------------------------------------------------
-Power Chromebook down, then power it up while holding Esc+F3.
-BEWARE: switching to developer mode deletes all user data.
-Create backups if you need them.
-
-While in developer mode, Chromebook will boot into a white screen saying
-"OS verification is off".
-
-Press Ctrl-D at this screen to boot Chromium OS from eMMC.
-Press Ctrl-U at this screen to boot from SD (or USB)
-Press Power to power it off.
-Do NOT press Space unless you mean it.
-This will switch it back to normal mode.
-
-The is no way to get rid of the white screen without re-flashing the bootloader.
-
-Troubleshooting
----------------
-Loud *BEEP* after pressing Ctrl-U means there's no valid partition to boot from.
-Which in turn means either bad GPT or improperly signed kernel.
-
-Return to the OS verification screen without any sounds means the code managed
-to reboot the board. May indicate properly signed but invalid image.
-
-Blank screen means the image is valid and properly signed but cannot boot
-for some reason, like missing or incorrect DT.
-
-In case the board becomes unresponsive:
-
-* Press Esc+F3+Power. The board should reboot instantly.
-  Remove SD card to prevent it from attempting a system recovery.
-
-* Hold Power button for around 10s. The board should shut down into
-  its soft-off mode. Press Power button again or open the lid to turn in on.
-
-* If that does not work, disconnect the charger and push a hidden
-  button on the underside with a pin of some sort. The board should shut
-  down completely. Opening the lid and pressing Power button will not work.
-  To turn it back on, connect the charger.
-
-Partitioning SD card manually
------------------------------
-Check mksd.sh for partitioning commands.
-
-Use parted and cgpt on a real device, and calculate the partition
-sizes properly. The kernel partition may be as small as 4MB, but
-you will probably want the rootfs to occupy the whole remaining space.
-
-cgpt may be used to check current layout:
-
-	output/host/usr/bin/cgpt show $SD
-
-All sizes and all offsets are in 512-byte blocks.
-
-Writing kernel and rootfs to a partitioned SD card
---------------------------------------------------
-Write .kpart directly to the bootable partition:
-
-	dd if=output/images/uImage.kpart of=${SD}1
-
-Make a new filesystem on the rootfs partition, and unpack rootfs.tar there:
-
-	mkfs.ext4 ${SD}2
-	mount ${SD2} /mnt/<ROOTFS-PARTITION>
-	tar -xvf output/images/rootfs.tar -C /mnt/<ROOTFS-PARTITION>
-	umount /mnt/<ROOTFS-PARTITION>
-
-This will require root permissions even if you can write to $SD.
-
-Kernel command line
--------------------
-The command line is taken from board/chromebook/snow/kernel.args and stored
-in the vboot header (which also holds the signature).
-
-The original bootloader prepends "cros_secure console= " to the supplied
-command line. The only way to suppress this is to enable CMDLINE_FORCE
-in the kernel config, disabling external command line completely.
-
-That's not necessary however. The mainline kernel ignores cros_secure,
-and supplying console=tty1 in kernel.args undoes the effect of console=
-
-Booting with console= suppresses all kernel output.
-As a side effect, it makes /dev/console unusable, which the init in use must
-be able to handle.
-
-WiFi card
----------
-Run modprobe mwifiex_sdio to load the driver.
-The name of the device should be mlan0.
-
-Further reading
----------------
-https://www.chromium.org/chromium-os/developer-information-for-chrome-os-devices/samsung-arm-chromebook
-http://linux-exynos.org/wiki/Samsung_Chromebook_XE303C12/Installing_Linux
-http://archlinuxarm.org/platforms/armv7/samsung/samsung-chromebook
-http://www.de7ec7ed.com/2013/05/application-processor-ap-uart-samsung.html
-http://www.de7ec7ed.com/2013/05/embedded-controller-ec-uart-samsung.html

board/chromebook/snow/sign.sh

@@ -1,41 +0,0 @@
-#!/bin/sh
-
-# This script creates u-boot FIT image containing the kernel and the DT,
-# then signs it using futility from vboot-utils.
-# The resulting file is called uImage.kpart.
-
-BOARD_DIR=$(dirname $0)
-mkimage=$HOST_DIR/usr/bin/mkimage
-futility=$HOST_DIR/usr/bin/futility
-devkeys=$HOST_DIR/usr/share/vboot/devkeys
-
-run() { echo "$@"; "$@"; }
-die() { echo "$@" >&2; exit 1; }
-test -f $BINARIES_DIR/zImage || \
-	die "No kernel image found"
-test -x $mkimage || \
-	die "No mkimage found (host-uboot-tools has not been built?)"
-test -x $futility || \
-	die "No futility found (host-vboot-utils has not been built?)"
-
-# kernel.its references zImage and exynos5250-snow.dtb, and all three
-# files must be in current directory for mkimage.
-run cp $BOARD_DIR/kernel.its $BINARIES_DIR/kernel.its || exit 1
-echo "# entering $BINARIES_DIR for the next command"
-(cd $BINARIES_DIR && run $mkimage -f kernel.its uImage.itb) || exit 1
-
-# futility requires non-empty file to be supplied with --bootloader
-# even if it does not make sense for the target platform.
-echo > $BINARIES_DIR/dummy.txt
-
-run $futility vbutil_kernel \
-	--keyblock $devkeys/kernel.keyblock \
-	--signprivate $devkeys/kernel_data_key.vbprivk \
-	--arch arm \
-	--version 1 \
-	--config $BOARD_DIR/kernel.args \
-	--vmlinuz $BINARIES_DIR/uImage.itb \
-	--bootloader $BINARIES_DIR/dummy.txt \
-	--pack $BINARIES_DIR/uImage.kpart || exit 1
-
-rm -f $BINARIES_DIR/kernel.its $BINARIES_DIR/dummy.txt

board/congatec/qmx6/readme.txt

@@ -0,0 +1,36 @@
+This is the minimal buildroot support for the Congatec QMX6 Qseven CoM
+
+conga-QMX6 is based on the freescale iMX6 SoC. For more information please
+have a look at http://www.congatec.com/products/qseven/conga-qmx6.html
+
+The configuration is based on the currently latest kernel release from
+Congatec's git repository which is based on 3.0.35. The bootloader u-boot
+is preconfigured on the CPU module and does not need to be replaced.
+
+To build the default configuration you only have to:
+
+	make qmx6_defconfig && make
+
+You will need a microSD card of sufficient size and the first or only
+partition configured as Linux type.
+
+To transfer the system to the card do:
+
+	$ sudo dd if=output/images/rootfs.ext2 of=/dev/sdX1
+
+You can optionally extend the filesystem size to the whole partition:
+
+	$ sudo resize2fs /dev/sdX1
+
+You can also update the card image without completely rewriting it:
+
+	$ sudo mount /dev/sdX1 /mnt
+	$ sudo tar xf output/images/rootfs.tar -C /mnt
+	$ sudo umount /mnt
+
+Connect a terminal program to the rs232 connector marked "CONSOLE"
+with baudrate set to 115200, insert the microSD card into the socket
+on the CPU module and power the board to watch the system boot.
+
+Booting from the SD card slot on the base board is currently not
+supported.

board/cubietech/cubieboard/boot.cmd

@@ -0,0 +1,4 @@
+setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait panic=10 ${extra}
+fatload mmc 0 0x43000000 script.bin
+fatload mmc 0 0x48000000 uImage
+bootm 0x48000000

board/cubietech/cubieboard/linux-cubieboard2.config

@@ -0,0 +1,749 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_RCU_FAST_NO_HZ=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=19
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_CGROUP_MEM_RES_CTLR=y
+CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
+CONFIG_CGROUP_MEM_RES_CTLR_KMEM=y
+CONFIG_CGROUP_PERF=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_BLK_CGROUP=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_PERF_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_JUMP_LABEL=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLK_DEV_BSGLIB=y
+CONFIG_BLK_DEV_INTEGRITY=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+CONFIG_MAC_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_SGI_PARTITION=y
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+CONFIG_ARCH_SUN7I=y
+CONFIG_SUNXI_SCALING_MIN=408
+# CONFIG_CACHE_L2X0 is not set
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_SMP=y
+CONFIG_ARM_ARCH_TIMER=y
+CONFIG_NR_CPUS=2
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_HIGHMEM=y
+CONFIG_COMPACTION=y
+CONFIG_KSM=y
+CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/mmc0p1 rw init=/init loglevel=8"
+CONFIG_KEXEC=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_DEFAULT_GOV_FANTASY=y
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=m
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_INTERACTIVE=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+CONFIG_CPU_FREQ_USR_EVNT_NOTIFY=y
+CONFIG_CPU_FREQ_DVFS=y
+CONFIG_CPU_IDLE=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_BINFMT_MISC=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM_DEBUG=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_FIB_TRIE_STATS=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=y
+CONFIG_NET_IPGRE_DEMUX=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_ARPD=y
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=y
+CONFIG_INET_ESP=y
+CONFIG_INET_IPCOMP=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_UDP_DIAG=m
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_WESTWOOD=y
+CONFIG_TCP_CONG_HTCP=y
+CONFIG_TCP_CONG_HSTCP=y
+CONFIG_TCP_CONG_HYBLA=y
+CONFIG_TCP_CONG_SCALABLE=y
+CONFIG_TCP_CONG_LP=y
+CONFIG_TCP_CONG_VENO=y
+CONFIG_TCP_CONG_YEAH=y
+CONFIG_TCP_CONG_ILLINOIS=y
+CONFIG_TCP_MD5SIG=y
+CONFIG_IPV6=y
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_SIT_6RD=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IPV6_PIMSM_V2=y
+# CONFIG_ANDROID_PARANOID_NETWORK is not set
+CONFIG_NETWORK_SECMARK=y
+CONFIG_NETWORK_PHY_TIMESTAMPING=y
+CONFIG_NETFILTER=y
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_ZONES=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CONNTRACK_TIMEOUT=y
+CONFIG_NF_CONNTRACK_TIMESTAMP=y
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NF_CT_NETLINK_TIMEOUT=m
+CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_XT_SET=m
+CONFIG_NETFILTER_XT_TARGET_AUDIT=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
+CONFIG_NETFILTER_XT_TARGET_CT=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CPU=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_IPVS=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA2=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
+CONFIG_IP_VS=m
+CONFIG_IP_VS_IPV6=y
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+CONFIG_IP_VS_PROTO_SCTP=y
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+CONFIG_IP_VS_FTP=m
+CONFIG_IP_VS_PE_SIP=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_REJECT_SKERR=y
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_REJECT_SKERR=y
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_IP6=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_ULOG=m
+CONFIG_BRIDGE_EBT_NFLOG=m
+CONFIG_L2TP=m
+CONFIG_L2TP_V3=y
+CONFIG_L2TP_IP=m
+CONFIG_L2TP_ETH=m
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_BATMAN_ADV=m
+CONFIG_OPENVSWITCH=m
+CONFIG_NETPRIO_CGROUP=m
+CONFIG_NET_PKTGEN=m
+CONFIG_IRDA=m
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+CONFIG_IRDA_ULTRA=y
+CONFIG_IRTTY_SIR=m
+CONFIG_KINGSUN_DONGLE=m
+CONFIG_KSDAZZLE_DONGLE=m
+CONFIG_KS959_DONGLE=m
+CONFIG_USB_IRDA=m
+CONFIG_SIGMATEL_FIR=m
+CONFIG_MCS_FIR=m
+CONFIG_BT=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+CONFIG_BT_ATH3K=m
+CONFIG_AF_RXRPC=m
+CONFIG_RXKAD=m
+CONFIG_CFG80211=y
+CONFIG_CFG80211_DEVELOPER_WARNINGS=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
+CONFIG_CFG80211_ALLOW_RECONNECT=y
+CONFIG_MAC80211=m
+CONFIG_MAC80211_MESH=y
+CONFIG_WIMAX=m
+CONFIG_RFKILL=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_CONNECTOR=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=2
+CONFIG_SUNXI_DBGREG=m
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_ATA=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_SW_SATA_AHCI_PLATFORM=y
+CONFIG_NETDEVICES=y
+CONFIG_BONDING=m
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+CONFIG_SUNXI_EMAC=y
+CONFIG_PHYLIB=y
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOE=m
+CONFIG_PPPOLAC=m
+CONFIG_PPPOPNS=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_USB_IPHETH=m
+CONFIG_ATH_COMMON=m
+CONFIG_ATH9K=m
+CONFIG_RTL8192CU=m
+CONFIG_RTL8192CU_SW=m
+CONFIG_RTL8188EU=m
+CONFIG_RTXX7X_SW=m
+CONFIG_INPUT_POLLDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_JOYDEV=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_KEYRESET=y
+CONFIG_KEYBOARD_HV2605_KEYBOARD=m
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_GT801=m
+CONFIG_TOUCHSCREEN_GT811=m
+CONFIG_TOUCHSCREEN_GT818=m
+CONFIG_TOUCHSCREEN_FT5X_TS=m
+CONFIG_TOUCHSCREEN_ZT8031=m
+CONFIG_GSENSOR=y
+CONFIG_SENSORS_BMA250=m
+CONFIG_MEMSIC_ECOMPASS=m
+CONFIG_SENSORS_MXC622X=m
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=8
+CONFIG_SERIAL_8250_RUNTIME_UARTS=8
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_SPI=y
+CONFIG_SPI_DEBUG=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_SUNXI=m
+CONFIG_POWER_SUPPLY=y
+CONFIG_AW_AXP=y
+# CONFIG_HWMON is not set
+CONFIG_REGULATOR=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_VIDEO_DEV=y
+CONFIG_MEDIA_TUNER_CUSTOMISE=y
+# CONFIG_MEDIA_TUNER_SIMPLE is not set
+# CONFIG_MEDIA_TUNER_TDA8290 is not set
+# CONFIG_MEDIA_TUNER_TDA827X is not set
+# CONFIG_MEDIA_TUNER_TDA18271 is not set
+# CONFIG_MEDIA_TUNER_TDA9887 is not set
+# CONFIG_MEDIA_TUNER_TEA5767 is not set
+# CONFIG_MEDIA_TUNER_MT20XX is not set
+# CONFIG_MEDIA_TUNER_MT2060 is not set
+# CONFIG_MEDIA_TUNER_MT2266 is not set
+# CONFIG_MEDIA_TUNER_MT2131 is not set
+# CONFIG_MEDIA_TUNER_QT1010 is not set
+# CONFIG_MEDIA_TUNER_MXL5005S is not set
+# CONFIG_MEDIA_TUNER_MXL5007T is not set
+# CONFIG_MEDIA_TUNER_MC44S803 is not set
+# CONFIG_MEDIA_TUNER_MAX2165 is not set
+# CONFIG_MEDIA_TUNER_TDA18218 is not set
+# CONFIG_MEDIA_TUNER_TDA18212 is not set
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_M5602=m
+CONFIG_USB_STV06XX=m
+CONFIG_USB_GL860=m
+CONFIG_USB_GSPCA_BENQ=m
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_CPIA1=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+CONFIG_USB_GSPCA_JEILINJ=m
+CONFIG_USB_GSPCA_JL2005BCD=m
+CONFIG_USB_GSPCA_KINECT=m
+CONFIG_USB_GSPCA_KONICA=m
+CONFIG_USB_GSPCA_MARS=m
+CONFIG_USB_GSPCA_MR97310A=m
+CONFIG_USB_GSPCA_NW80X=m
+CONFIG_USB_GSPCA_OV519=m
+CONFIG_USB_GSPCA_OV534=m
+CONFIG_USB_GSPCA_OV534_9=m
+CONFIG_USB_GSPCA_PAC207=m
+CONFIG_USB_GSPCA_PAC7302=m
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SE401=m
+CONFIG_USB_GSPCA_SN9C2028=m
+CONFIG_USB_GSPCA_SN9C20X=m
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_SPCA1528=m
+CONFIG_USB_GSPCA_SQ905=m
+CONFIG_USB_GSPCA_SQ905C=m
+CONFIG_USB_GSPCA_SQ930X=m
+CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_STV0680=m
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TOPRO=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_VICAM=m
+CONFIG_USB_GSPCA_XIRLINK_CIT=m
+CONFIG_USB_GSPCA_ZC3XX=m
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_HDPVR=m
+CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_EM28XX_ALSA=m
+CONFIG_VIDEO_CX231XX=m
+CONFIG_VIDEO_CX231XX_ALSA=m
+CONFIG_VIDEO_TM6000=m
+CONFIG_VIDEO_TM6000_ALSA=m
+CONFIG_VIDEO_USBVISION=m
+CONFIG_USB_ET61X251=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_PWC=m
+CONFIG_VIDEO_CPIA2=m
+CONFIG_USB_ZR364XX=m
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_IMX074=m
+CONFIG_SOC_CAMERA_MT9M001=m
+CONFIG_SOC_CAMERA_MT9M111=m
+CONFIG_SOC_CAMERA_MT9T031=m
+CONFIG_SOC_CAMERA_MT9T112=m
+CONFIG_SOC_CAMERA_MT9V022=m
+CONFIG_SOC_CAMERA_RJ54N1=m
+CONFIG_SOC_CAMERA_TW9910=m
+CONFIG_SOC_CAMERA_PLATFORM=m
+CONFIG_SOC_CAMERA_OV2640=m
+CONFIG_SOC_CAMERA_OV5642=m
+CONFIG_SOC_CAMERA_OV6650=m
+CONFIG_SOC_CAMERA_OV772X=m
+CONFIG_SOC_CAMERA_OV9640=m
+CONFIG_SOC_CAMERA_OV9740=m
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+# CONFIG_VIDEO_CSI_SUN4I is not set
+CONFIG_RADIO_SI470X=y
+CONFIG_USB_SI470X=m
+CONFIG_I2C_SI470X=m
+CONFIG_USB_MR800=m
+CONFIG_USB_DSBR=m
+CONFIG_RADIO_SI4713=m
+CONFIG_USB_KEENE=m
+CONFIG_RADIO_TEA5764=m
+CONFIG_RADIO_SAA7706H=m
+CONFIG_RADIO_TEF6862=m
+CONFIG_RADIO_WL1273=m
+CONFIG_AUDIO_ENGINE=y
+CONFIG_PA_CONTROL=y
+CONFIG_DRM=m
+CONFIG_DRM_MALI=m
+CONFIG_DRM_UDL=m
+CONFIG_MALI=m
+CONFIG_MALI400_DEBUG=y
+CONFIG_MALI400_GPU_UTILIZATION=y
+CONFIG_FB=y
+CONFIG_FB_SUNXI=y
+CONFIG_FB_SUNXI_LCD=y
+CONFIG_FB_SUNXI_HDMI=y
+CONFIG_HDMI_CEC=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=m
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_ALOOP=m
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_SOC=y
+CONFIG_SND_SUNXI_SOC_SPDIF=y
+CONFIG_HIDRAW=y
+CONFIG_UHID=y
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
+CONFIG_HID_KYE=y
+CONFIG_HID_LOGITECH_DJ=y
+CONFIG_LOGITECH_FF=y
+# CONFIG_LOGIWHEELS_FF is not set
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_REALTEK=y
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+CONFIG_USB_STORAGE_ONETOUCH=y
+CONFIG_USB_STORAGE_KARMA=y
+CONFIG_USB_STORAGE_CYPRESS_ATACB=y
+CONFIG_USB_STORAGE_ENE_UB6250=y
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_CONSOLE=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_GADGET=y
+CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_FILE_STORAGE_TEST=y
+CONFIG_MMC=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+CONFIG_MMC_USHC=y
+CONFIG_MMC_SUNXI_POWER_CONTROL=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_SUNXI=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_SUN4I=y
+CONFIG_STAGING=y
+CONFIG_ANDROID=y
+CONFIG_ANDROID_BINDER_IPC=y
+CONFIG_ANDROID_LOGGER=y
+CONFIG_ANDROID_RAM_CONSOLE=y
+CONFIG_ANDROID_LOW_MEMORY_KILLER=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_REISERFS_FS=y
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QFMT_V2=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=y
+CONFIG_CUSE=y
+CONFIG_FSCACHE=y
+CONFIG_FSCACHE_STATS=y
+CONFIG_CACHEFILES=y
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+CONFIG_NTFS_FS=y
+CONFIG_NTFS_RW=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_HFS_FS=y
+CONFIG_HFSPLUS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_V4_1=y
+CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="y"
+CONFIG_ROOT_NFS=y
+CONFIG_NFS_USE_LEGACY_DNS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_FAULT_INJECTION=y
+CONFIG_CIFS=y
+CONFIG_CIFS_DFS_UPCALL=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_CODEPAGE_950=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_CODEPAGE_949=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_PRINTK_TIME=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_FRAME_WARN=2048
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_SECTION_MISMATCH=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_LIST=y
+CONFIG_BOOT_PRINTK_DELAY=y
+CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
+# CONFIG_FTRACE is not set
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_STRICT_DEVMEM=y
+CONFIG_DEBUG_LL=y
+CONFIG_SECURITYFS=y
+# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_SEQIV=y
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ZLIB=y
+CONFIG_CRYPTO_LZO=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_LIBCRC32C=y

board/cubietech/cubieboard/mkcubiecard.sh

@@ -0,0 +1,124 @@
+#! /bin/sh
+# mkCubieCard.sh v0.1:
+# 2013, Carlo Caione <carlo.caione@gmail.com>
+# heavely based on :
+# mkA10card.sh v0.1
+# 2012, Jason Plum <jplum@archlinuxarm.org>
+# loosely based on :
+# mkcard.sh v0.5
+# (c) Copyright 2009 Graeme Gregory <dp@xora.org.uk>
+# Licensed under terms of GPLv2
+#
+# Parts of the procudure base on the work of Denys Dmytriyenko
+# http://wiki.omap.com/index.php/MMC_Boot_Format
+
+IMAGES_DIR=$1
+SPL_IMG=$IMAGES_DIR/sunxi-spl.bin
+SPL_UBOOT=$IMAGES_DIR/u-boot-sunxi-with-spl.bin
+UBOOT_IMG=$IMAGES_DIR/u-boot.bin
+UIMAGE=$IMAGES_DIR/uImage
+BIN_BOARD_FILE=$IMAGES_DIR/script.bin
+ROOTFS=$IMAGES_DIR/rootfs.tar
+BOOT_CMD_H=$IMAGES_DIR/boot.scr
+
+export LC_ALL=C
+
+if [ $# -ne 2 ]; then
+	echo "Usage: $0 <images_dir> <drive>"
+	exit 1;
+fi
+
+if [ `id -u` -ne 0 ]; then
+	echo "This script must be run as root" 1>&2
+	exit 1
+fi
+
+if [ ! -f $SPL_IMG  -a ! -f $SPL_UBOOT ] ||
+   [ ! -f $UBOOT_IMG ] ||
+   [ ! -f $UIMAGE ] ||
+   [ ! -f $BIN_BOARD_FILE ] ||
+   [ ! -f $ROOTFS ] ||
+   [ ! -f $BOOT_CMD_H ]; then
+	echo "File(s) missing."
+	exit 1
+fi
+
+DRIVE=$2
+P1=`mktemp -d`
+P2=`mktemp -d`
+
+dd if=/dev/zero of=$DRIVE bs=1M count=3
+
+SIZE=`fdisk -l $DRIVE | grep Disk | grep bytes | awk '{print $5}'`
+
+echo DISK SIZE - $SIZE bytes
+
+
+# ~2048, 16MB, FAT, bootable
+# ~rest of drive, Ext4
+{
+echo 32,512,0x0C,*
+echo 544,,,-
+} | sfdisk -D $DRIVE
+
+sleep 1
+
+if [ -b ${DRIVE}1 ]; then
+	D1=${DRIVE}1
+	umount ${DRIVE}1
+	mkfs.vfat -n "boot" ${DRIVE}1
+else
+	if [ -b ${DRIVE}p1 ]; then
+		D1=${DRIVE}p1
+		umount ${DRIVE}p1
+		mkfs.vfat -n "boot" ${DRIVE}p1
+	else
+		echo "Cant find boot partition in /dev"
+		exit 1
+	fi
+fi
+
+
+if [ -b ${DRIVE}2 ]; then
+	D2=${DRIVE}2
+	umount ${DRIVE}2
+	mkfs.ext4 -L "Cubie" ${DRIVE}2
+else
+	if [ -b ${DRIVE}p2 ]; then
+		D2=${DRIVE}p2
+		umount ${DRIVE}p2
+		mkfs.ext4 -L "Cubie" ${DRIVE}p2
+	else
+		echo "Cant find rootfs partition in /dev"
+		exit 1
+	fi
+fi
+
+mount $D1 $P1
+mount $D2 $P2
+
+# write uImage
+cp $UIMAGE $P1
+# write board file
+cp $BIN_BOARD_FILE $P1
+# write u-boot script
+cp $BOOT_CMD_H $P1
+# write rootfs
+tar -C $P2 -xvf $ROOTFS
+
+sync
+
+umount $D1
+umount $D2
+
+rm -fr $P1
+rm -fr $P2
+
+if [ -e $SPL_UBOOT ]; then
+	dd if=$SPL_UBOOT of=$DRIVE bs=1024 seek=8
+else
+	# write SPL
+	dd if=$SPL_IMG of=$DRIVE bs=1024 seek=8
+	# write mele u-boot
+	dd if=$UBOOT_IMG of=$DRIVE bs=1024 seek=32
+fi