Update for 2013.08

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

.gitignore

@@ -12,3 +12,4 @@
 *.orig
 *.rej
 *~
+*.pyc

CHANGES

@@ -1,3 +1,740 @@
+2013.08, Released August 31th, 2013:
+
+	Minor fixes.
+
+	Documentation build fixed.
+
+	Updated/fixed packages: ltrace, strongswan
+
+2013.08-rc3, Released August 29th, 2013:
+
+	Fixes all over the tree.
+
+	External toolchain lib32/lib64 handling, ABI name for EABIhf,
+	misc fixes for generatelocales, apply-patches and module
+	stripping.
+
+	Top level menu names reordered and renamed for clarity.
+
+	Updated/fixed packages: acl, attr, bash, dbus, directfb,
+	dvb-apps, kexec, kmod, libbsd, linux-fusion, mesa3d, minidlna,
+	openssh, openssl, pulseaudio, python-setuptools, qt5,
+	qt5webkit, redis, strongswan, sunxi-mali
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#6464: dbus-daemon-launch-helper needs setuid
+
+2013.08-rc2, Released August 16th 2013:
+
+	Documentation improvements.
+
+	External toolchains fixes.
+
+	Updated/fixed packages: aircrack-ng, bash, boost, cairo,
+	cppcms, eglibc, ffmpeg, gcc, git, gnupg, imagemagick, libcec,
+	libffi, libgcrypt, linux, linux-headers, ltrace, netatalk,
+	opencv, opengl, readline, samba, strongswan, sunxi-cedarx,
+	uclibc, udev, wayland, webkit, zeromq.
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#6440: typo in ffmpeg makefile
+
+2013.08-rc1, Released August 5th, 2013:
+
+	Architectures:
+	 - improved support for floating point on ARM and Thumb/Thumb2
+	 - support for ARM OABI removed
+
+	Toolchains:
+         - support added for Sourcery CodeBench ARM and MIPS 2013.05
+         - Linaro ARM and Aarch64 toolchains updated
+	 - support added for the Arago ARMv5 and ARMv7 toolchains
+	 - gcc 4.8.x version bumped
+	 - support for installing both FDPIC and FLAT libraries on
+	   Blackfin
+	 - support for uClibc 0.9.31 removed,
+	 - convert the internal toolchain backend to use the package
+	   infrastructure
+	 - support added for eglibc in the internal toolchain backend
+	 - toolchain components for the ARC architecture updated and
+           gdb for ARC added.
+	 - support for Blackfin in the internal toolchain fixed
+
+	Defconfigs: beaglebone_defconfig updated, new defconfig for
+	CubieBoard, for Olimex mx233 Olinuxino, for Calao Systems
+	TNY-A9G20-LPW.
+
+	A number of packages have been fixed to use the
+	<pkg>_CONFIG_SCRIPTS mechanism to get their <pkg>-config shell
+	script installed and modified properly. Licensing informations
+	has been added to a number of packages.
+
+	Use XZ tarballs for a number of packages.
+
+	Noticeable package changes/additions:
+         - The glib2/libgtk2/webkit stack has been updated to recent
+           versions.
+	 - Support for Gstreamer 1.x has been added.
+	 - OpenGL support for TI OMAP platforms has been added.
+	 - OpenGL support for Allwinner platforms has been added.
+	 - OpenMAX support for RasberryPi has been added.
+
+	Updated/fixed packages: acl, attr, autoconf, avahi, barebox,
+	bind, binutils, busybox, bwm-ng, bzip2, cifs-utils, colletctd,
+	cpanminus, cups, curl, dash, dbus, dhcp, directfb,
+	directfb-examples, dnsmasq, dosfstools, dropbear, dtc,
+	e2fsprogs, ed, efl, enlightenment, erlang, ethtool, fbgrab,
+	fftw, firmware-imx, flot, fltk, freetype, gawk, gdk-pixbuf,
+	gettext, gmp, gnutls, gsl, gutenprint, gvfs, gzip, haserl,
+	hiawatha, httping, icu, imagemagick, imlib2, imx-lib,
+	intltool, iozone, ipset, iptables, jquery, jquery-keyboard,
+	jquery-sparkline, kmod, less, libart, libcdaudio, libcgicc,
+	libesmtp, libftdi, libfuse, libglib2, libgtk, libgtk2, libidn,
+	libiqrf, liblog4c-localtime, libnspr, libnss, libpcap,
+	libroxml, libserial, libsigsev, libsoup, libtool, libtpl,
+	libvncserver, libxml2, linphone, lm_sensors, logrotate,
+	ltrace, lttng, luafilesystem, luajit, minicom, monit, mpg123,
+	mtd, mutt, mxml, neard, netatask, netsnmp, nettle,
+	network-manager, nodejs, nss-mdns, openssh, openswan, openvpn,
+	opkg, opus, pcre, perl-cross, php, pixman, poco, polarssl,
+	pulseaudio, pv, python, python3, qt, qt5, qt5declarative,
+	qt5jsbackend, qt5quick1, readline, rpi-firmware, ruby, samba,
+	sane-backends, sconeserver, sdl_image, sdparm, ser2net,
+	socketcand, sqlite, squid, strace, tcl, tcpdump, tinyhttpd,
+	tvheadend, tzdata, uboot, udpcast, usb_modeswitch,
+	usb_modeswitch_data, usbutils, webkit, wireshark, wvstreams,
+	xapp_luit, xapp_xmodmap, xenomai, xfsprogs, xlib_libX11, zic,
+	zlib.
+
+	New packages: a10disp, aespipe, am33x-cm3, cppcms, dhcpcd,
+	dropwatch, dtc, ecryptfs-utils, eglibc, elf2flt, fdk-aac,
+	gcc-final, gcc-initial, gcc-intermediate, git,
+	gpu-viv-bin-mx6q, gst1-plugins-bad, gst1-plugins-base,
+	gst1-plugins-good, gst1-plugins-ugly, gst-omx,
+	gst-plugin-x170, gstreamer1, jimtcl, lbase64, libassuan,
+	libbsd, libcec, libdvbsi, libedit, libgpgme, libqmi,
+	libqrencode, libsvg, libsvg-cairo, libunwind, libvpx,
+	linux-headers, lockdev, luabitop, luacrypto, lua-ev,
+	luaexpatutils, msgpack, ocrad, on2-8170-libs,
+	on2-8170-modules, p11-kit, pax-utils, ptpd, ptpd2,
+	python-pyro, ramspeed/smp, snappy, strongswan, sunxi-boards,
+	sunxi-cedarx, sunxi-mali, sunxi-tools, ti-gfx, tinymembench,
+	tree, tstools, uclibc, w_scan.
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#4718: python (built for powerpc) distutils has paths to host
+               compiler toolchain
+	#5516: appended device tree blobs on uImage fails
+	#6302: Versions of packages retrieved from github.com are wrong
+	#6308: dosfstools download link is wrong
+	#6326: Dropbear: Add options to allow better config for
+               different target devices (e.g. routers)
+	#6338: Wrong download link for minicom package
+	#6344: Wrong handling of license text files with same name and
+               different directory
+	#6374: gnutls package broken if linux cryptodev module
+               selected
+	#6410: omap3_beagle has uimage error load address error
+
+2013.05, Released May 31th, 2013:
+
+	Minor fixes.
+
+	External toolchain wrapper fix for if host/usr/bin is placed
+	in the patch.
+
+	Updated/fixed packages: acpid, at91bootstrap, czmq, elf2flt,
+	flex, jamvm, kmod, libplayer, libtirpc, libv4,
+	lttng-babeltrace, opengl, qt5jsbackend, udpcast, wvstreams
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#4868: Buildroot compile failure for toolchain/gdb-7.4/intl/reloc...
+	#4988: flex and m4 problems
+	#5912: obsolete CVS files
+
+2013.05-rc3, Released May 25th, 2013:
+
+	Minor fixes.
+
+	Updated/fixed packages: aircrack-ng, bellagio, boost, crda,
+	dvb-apps, flot, libatomic_ops, libeXosip2, libosip2, libxml2,
+	mongrel2, poco, portaudio, pptp-linux, tvheadend, urg, weston,
+	wireshark
+
+2013.05-rc2, Released May 15th, 2013:
+
+	Fixes all over the tree.
+
+	Default number of parallel jobs is now number of CPUs + 1.
+
+	Defconfigs: Add Telit EVK-PRO3, AT91SAM9260-EK Nand flash.
+
+	Updated/fixed packages: aircrack-ng, busybox, cairo,
+	classpath, curlftpfs, czmq, dbus, f2fs-tools, fan-ctrl,
+	filemq, gst-plugin-bad, gutenprint, hplip, json-c,
+	libatomic_ops, libcurl, libdrm, libglib2, libnspr, libnss,
+	libsha1, libsigsegv, libxcb, linknx, linux-pam, lttng-modules,
+	lttng-tools, matchbox-lib, mcookie, mesa3d, neon, pixman,
+	pulseaudio, python-nfc, qt5imageformats, quota, openssl,
+	sconeserver, strace, sylpheed, wvstreams,
+	xapp_{appres,bdftopcf,beforelight,bitmap,edires,fonttosfnt},
+	xapp_{fslsfonts,fstobdf,iceauth,ico,listres,luit,mkfontdir},
+	xapp_{mkfontscale,oclock,rgb,rstart,scripts,sessreg,setxkbmap},
+	xapp_{showfont,smproxy,twm,viewres,x11perf,xauth,xbacklight},
+	xapp_x{biff,calc,clipboard,clock,cmsdb,cursorgen,dbedizzy,ditview},
+	xapp_x{dm,dpyinfo,driinfo,edit,ev,eyes,f86dga,fd,fontsel,fs,fsinfo},
+	xapp_x{gamma,gc,host,input-calibrator,input,kbcomp,kbevd,kbprint},
+	xapp_x{kbutils,kill,load,logo,lsatoms,lsclients,lsfonts,mag,man},
+	xapp_x{message,mh,modmap,more,pr,prop,randr,rdb,refresh,set,setmode},
+	xapp_x{setpointer,setroot,sm,stdcmap,vidtune,vinfo,wd,wininfo,wud},
+	xcb-util, xcursor-transparent-theme, xdata_xbitmaps,
+	xdata_xcursor-themes,
+	xdriver_xf86-input-{evdev,joystick,keyboard,mouse,synaptics},
+	xdriver_xf86-input-{tslib,vmmouse,void},
+	xdriver_xf86-video-{ark,ast,ati,cirrus,dummy,fbdev,geode,glide},
+	xdriver_xf86-video-{glint,i128,intel,mach64,mga,neomagic,newport},
+	xdriver_xf86-video-{nv,openchrome,r128,savage,siliconmotion,sis},
+	xdriver_xf86-video-{tdfx,tga,trident,v4l,vesa,vmware,voodoo,wsfb},
+	xfont_encodings, xfont_font-adobe-{100,75}dpi,
+	xfont_font-utopia-{100dpi,75dpi,type1},
+	xfont_font-{alias,arabic-misc,bh-100dpi,bh-75dpi},
+	xfont_font-bh-lucidatypewriter-{100,75}dpi, xfont_font-bh-{ttf,type1},
+	xfont_font-bitstream-{100dpi,75dpi,type1}, xfont_font-cronyx-cyrillic,
+	xfont_font-{cursor,daewoo,dec,isas,jis,micro}-misc,
+	xfont_font-ibm-type1, xfont_font-misc-{cyrillic,ethiopic,meltho,misc},
+	xfont_font-{mutt,schumacher}-misc,
+	xfont_font-{screen-cyrillic,sony-misc,sun-misc,util},
+	xfont_font-winitzki-cyrillic, xfont_font-xfree86-type1,
+	xlib_lib{FS,ICE,SM,X11,XScrnSaver,Xau,Xaw,Xcomposite,Xcursor},
+	xlib_libX{damage,dmcp,ext,fixes,font,ft,i,inerama,mu,pm,randr},
+	xlib_libX{render,res,t,tst,v,vMC,xf86dga,xf86vm},
+	xlib_lib{dmx,fontenc,pciaccess,pthread-stubs,xkbfile}, xlib_xtrans,
+	xproto_{applewm,bigreqs,composite,damage,dmx,dri2,fixes}proto,
+	xproto_{fontcache,font,gl,input,kb,randr,record,render}proto,
+	xproto_{resource,scrnsaver,video,windowswm,xcmisc,xext}proto,
+	xproto_{xf86bigfont,xf86dga,xf86dri,xf86vidmode,xinerama,x}proto,
+	xserver_xorg-server, xutil_{makedepend,util-macros}
+
+	Readded Packages: xapp_xinit
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#5054: amd64: cannot find init - due to missing /lib64 folder
+
+2013.05-rc1, Released May 8th, 2013:
+
+	Architectures: ARC support, Blackfin support, FLAT binary
+	format, ARM: Drop old CPU variants, add fa526/626, Marvell PJ4
+
+	Toolchains: Add new Microblaze external toolchains, Linaro
+	ARM/Aarch64 updates, GCC 4.6.4 / 4.7.3 / 4.8.0 added to
+	internal toolchain, default to GCC 4.7.x. Internal
+	Crosstool-ng backend deprecated.
+
+	Defconfigs: Add Atmel at91sam9g45m10ek, freescale mpc8315erdb
+	& p1010rdb, Armadeus apf27 / apf28, Openblocks A6, Raspberry
+	pi, gnublin board.
+
+	FS: LZO and XZ compression methods, extra ubifs options,
+	ext2 rev 0/1 and ext3/4 support.
+
+	Patch handling: apply-patches now has .patch.xz support,
+	Patch logic reworked as discussed during Febrary dev days:
+	http://elinux.org/Buildroot:DeveloperDaysFOSDEM2013
+
+	<pkg>-rsync now excludes version control files.
+
+	linux: uImage load address for ARM multiplatform kernels
+
+	Infrastructure for multiple OpenGL / ES / EGL / OpenVG
+	providers, similar to how libjpeg / libjpeg-turbo is handled.
+
+	Infrastructure for packages to add system users.
+
+	kconfig: updated to 3.9-rc2, support make olddefconfig
+
+	Updated/fixed packages: alsa-lib, alsa-utils, apr, apr-util,
+	argp-standalone, at, at91bootstrap, audiofile, aumix, avahi,
+	bash, blackbox, bind, binutils, bison, boost, bridge-utils,
+	busybox, ccache, cifs-utils, cmake, collectd, connman,
+	conntrack-tools, cpanminus, crosstool-ng, diffutils, directfb,
+	directfb-examples, divine, dmalloc, dnsmasq, dosfstools,
+	dropbear, e2fsprogs, ebtables, eeprog, erlang, ethtool,
+	fb-test-app, fbset, feh, ffmpeg, file, flex, flot, foomatic,
+	fxload, gd, gdb, gdisk, genimage, gettext, gmp, gnuchess,
+	gnutls, gob2, gperf, gpsd, gstreamer, haserl, hiawatha, htop,
+	httping, icu, inotify-tools, intltool, iproute2, ipset,
+	iptables, iw, jpeg, jquery, jquery-{sparkline,validation},
+	json-c, kbd, kexec, kismet, kmod, lcdproc, libarchive,
+	libatasmart, libcap, libconfig, libconfuse, libcurl, libdrm,
+	libeet, libev, libevas, libeXosip2, libffi, libfribi, libfuse,
+	libgcrypt, libglib2, libgtk2, libid3tag, libmicrohttpd,
+	libnetfilter_acct, libnetfilter_conntrack, libnl, libpcap,
+	libplayer, libsigc, libv4l, libxcb, linenoise, linux-pam,
+	lm_sensors, ltp-testsuite, luajit, lzop, madplay, make, mdadm,
+	mediastreamer, memtester, mesa3d,
+	mobile-broadband-provider-info, monit, mpd, mpfr, mpg123,
+	mrouted, msmtp, nbd, ncurses, ndisc6, neard, neardal, neon,
+	netperf, netsnmp, nettle, nfacct, ntfs-3g, ofono, olsr,
+	omap-u-boot-utils, openssh, openssl, openswan, openvpn,
+	oprofile, orc, patch, pciutils, pcre, perl, php, poco,
+	polarssl, proftpd, psmisc, pulseaudio, python,
+	python-{bottle,netifaces,serial,setuptools}, qt, quagga,
+	quota, radvd, rpi-firmware, rpi-userland, rt-tests, sam-ba,
+	samba, sawman, sdl, ser2net, smartmontools, socat, socketcand,
+	speex, squid, stress, stunnel, sudo, syslinux, sysstat,
+	sysvinit, tcl, tcprelay, tinyhttpd, tslib, tvheadend,
+	uboot-tools, udev, ulogd, util-linux, vala, vtun, webkit,
+	xapp_{iceauth,luit,makefontscale,sessreg,setxkbmap,smproxy},
+	xapp_{xauth,xcmsdb,xdpyinfo,xev,xgamma,xhost,xinput,xkbcomp},
+	xapp_{xkbevd,xlsatoms,xlsclients,xmodmap,xpr,xprop,xrandr,xrdb},
+	xapp_{xset,xwd,xwininfo}, xcb-{proto,util},
+	xdriver_xf86-input-{evdev,joystick,keyboard,mouse,synptics},
+	xdriver_xf86-input-{tslib,vmmouse,void},
+	xdriver_xf86-video-{ark,ast,ati,cirrus,dummy,geode,glide,glint},
+	xdriver_xf86-video-{i128,intel,mach64,mga,neomagic,newport},
+	xdriver_xf86-video-{openchrome,r128,savage,siliconmotion,sis},
+	xdriver_xf86-video-{tdfx,trident,vesa,vmware,wsfb}, xenomai,
+	xfont, xinetd, xkeyboard-config, xlib_lib{FS,ICE,SM,X11},
+	xlib_libX{scrnSaver,au,aw,cursor,dmcp,ext,fixes,font,ft,i},
+	xlib_libX{inerama,mu,pm,randr,res,tst,v,vMC,xf86dga,xf86vm},
+	xlib_lib{dmx,fontenc,pciaccess,xkbfile}, xlib_xtrans,
+	xproto_{applevm,bigreqs,dri2,fonts,gl,input,kbd,record}proto,
+	xproto_{resource,scrnsaver,xcmisc,xext,x}proto,
+	xserver_xorg-server, xutil_makedepend, xz, zeromq
+
+	New packages: aircrack-ng, bcusdk, chrony, crda,
+	cryptodev-linux, cppzmq, czmq, dtach, enscript, exfat,
+	exfat-utils, f2fs-tools, fan-ctrl, filemq, foomatic-filters,
+	genimage, genpart, glibmm, gnuplot, gtest, gutenprint, hplip,
+	iozone, jansson, jhead, jquery-keyboard, jquery-ui,
+	jquery-ui-themes, json-glib, json-javascript, lcms2, libpfm4,
+	libpthsem, libserial, libsigsegv, libtasn1, libwebsockets,
+	libxkbcommon, libxml++, linknx, log4cxx, mongoose, mongrel2,
+	mtools, ne10, nmap, nodejs, openobex, openpgm, poppler,
+	protobuf-c, python-m2crypto, python-thrift, qjson, qt5base,
+	qt5declarative, qt5graphicaleffects, qt5imageformats,
+	qt5jsbackend, qt5multimedia, qt5quick1, qt5script, qt5svg,
+	qt5webkit qt5xmlpatterns, rapidjson, redis, swig, texinfo,
+	tzdata, urg, ussp-push, wayland, webp, weston, wireless-regdb,
+	wireshark, wvdial, wvstreams, xcb-util-image, xcb-util-wm,
+	xcursor-transparent-theme, zic, zmqpp, zyre
+
+	Removed packages: microperl, ocf-linux, xapp_xinit,
+	xapp_xplsprinters, xapp_xprehashprinterlist,
+	xfont_font-bitstream-speedo,
+	xlib_lib{Xfontcache,XprintAppUtil,XprintUtil,Xp,oldX,xkbui},
+	xproto_{print,xf86rush}proto
+
+	Deprecated packages: vala
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#1291: Add support for Faraday 526 arm processor (fa526)
+	#2683: cups does not install correctly to target
+	#3313: mesa3d fails to build
+	#5186: initramfs/cpio should support lzo compression
+	#5636: agetty - cannot get controlling tty error - need updated...
+	#5906: collectd client headers not exported
+	#5966: bison unnecessarily required as build dependency
+	#6140: --enable-fileinfo not applied for php package
+	#6164: openvpn usage of ip tool from Busybox
+
+2013.02, Released February 28th, 2013:
+
+	Misc manual updates.
+
+	Updated/fixed packages: busybox, collectd, flashbench,
+	libgtk2, libupnp, mii-diag, quota
+
+2013.02-rc3, Released February 26th, 2013
+
+	Minor fixes.
+
+	Updated/fixed packages: conntrack-tools, dialog,
+	enlightenment, haserl, keyutils, libfif, libmad,
+	linux-firmware, linux-fusion, matchbox-desktop, matchbox-wm,
+	ruby, spawn-fcgi, vtun
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#5960: fusion.ko driver does not install to target rootfs
+
+2013.02-rc2, Released February 19th, 2013
+
+	Fixes all over the tree.
+
+	Various manual updates and fixes.
+
+	Updated/fixed packages: busybox, collectd, gesftpserver,
+	glib-networking, gnutls, inotify-tools, libcurl, libffi,
+	libglib2, libtorrent, libvorbis, neard, network-manager,
+	ntfs-3g, openssl, qt, rpi-userland, rtorrent, thttpd, vim.
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#5906: collectd client headers not exported
+
+2013.02-rc1, Released February 10th, 2013
+
+	Toolchain: Crosstool-ng 1.17.0, default to GCC 4.6.3, target
+	libraries install fixed. Add Linaro ARM
+	2012.11/2012.12/2013.01, AArch64 12.11/12.12/13.01. Sourcery
+	CodeBench MIPS 2012.03/09. Infrastructure to warn about
+	missing 32bit support for binary toolchains. Toolchain wrapper
+	is now relocatable. Add GDB 7.5.1 / Remove 6.8 / 7.0 /
+	7.1. Deprecate uClibc 0.9.31.
+
+	Architecture: Xtensa fixes, add missing powerpc variants, arm
+	1136jf-s rev1, add A5/A15, neon support toggle, OABI
+	deprecated. Sparc: drop old unused variants
+
+	Bootloaders: At91bootstap: fix upstream URL, Barebox: add
+	2012.12/2013.01/2013.02, remove 2012.08/09/10, lzop fixes,
+	environment image support, U-Boot: add 2013.01.01
+
+	Linux: fix appended dtb handling for v3.8+ kernels, support
+	multiple device trees
+
+	Defconfigs: calao USB-A9260, snowball, QEMU PPC440 on ML507
+	board, QEMU ARM Exynos4210, Kernel version in QEMU defconfigs
+	updated, at91rm9200df: misc fixes. Lock kernel headers to
+	match kernel.
+
+	Infrastructure: Git download fixes. Toolchain make target
+	renamed from 'cross' to 'toolchain'. Eclipse integration
+	support. Option to set root password, post image scripts,
+	config scripts handling.
+
+	Updated/fixed packages: alsa-lib, argp-standalone, argus,
+	arptables, atk, audiofile, axel, beecrypt, bind, bison,
+	bluez_utils, boost, cairo, can-utils, bmon, boa, busybox,
+	cairo, ccache, cdrkit, cifs-utils, cjson, cmake, collectd,
+	connman, coreutils, cpanminus, cups, dbus, dhcp, dialog,
+	diffutils, directfb, distcc, divine, dnsmasq, docker,
+	dosfstools, dstat, e2fsprogs, ebtables, ed, empty, ethtool,
+	expedite, fbset, fbv, ffmpeg, flex, fltk, fluxbox, freetype,
+	gadget-test, gawk, gdb, genext2fs, gettext, giblib,
+	glib-networking, gmp, gmpc, gnupg, gnutls, gpsd,
+	gst-plugins-{bad,base,good}, gstreamer, gzip, haserl, hdparm,
+	heirloom-mailx, hiawanta, hostapd, icu, imagemagick, imlib2,
+	inadyn, infozip, iproute2, ipset, iptables, iw, jpeg, jquery,
+	jquery-sparklines, jqeury-validation, kismet, kmod, lame,
+	libao, libcap, libcurl, libdvdnav, libdvdread, libecore,
+	libedbus, libedje, libeet, libefreet, libeina, libeio,
+	liberation, libelementary, libembryo, libethumb, libev,
+	libevas, libffi, libfribidi, libfuse, libgcrypt, libglib2,
+	libgpg-error, libgtk2, libhid, libidn, libmicrohttpd, libmpd,
+	libnl, libnspr, libnss, libogg, libpcap, libplayer, libpng,
+	libroxml, librsvg, libseccomp, libsigc, libsndfile, libungif,
+	libupnp, liburcu, libusb-compat, libvncserver, libvorbis,
+	libxml2, libxslt, lighttpd, links, linux-firmware,
+	linux-fusion, ltp-testsuite, ltrace,
+	lttng-{babel,libust,modules,tools}, lvm2, lua, luajit, lzop,
+	matchbox-{desktop,lib}, mdadm, metacity, midori, minicom, mpd,
+	mpfr, mplayer, mtd, mysql_client, ncurses, neon, netatalk,
+	networkmanager, nspr, ntfs-3g, nuttcp, ofone, olsr, openssl,
+	openvpn, opkg, oprofile, opus, opus-tools, orc, ortp, pango,
+	pciutils, pcmanfm, pcre, pcsc-lite, perl, php, pixman,
+	pkgconf, polarssl, pptp-linux, proxychains, pulseaudio,
+	python, python3, qemu, qextserialport, qt, quagga, radvd,
+	readline, rng-tools, rt-tests, rubix, ruby, sam-ba, samba,
+	sane-backends, sconeserver, scons, screen, sdl, sdl_gfx,
+	sdl_mixer, sdl_ttf, sdparm, sed, ser2net, smartmontools,
+	speex, sqlite, squid, sshfs, strace, sudo, sylpheed, tn5250,
+	taglib, tar, torsmo, transmission, tslib, uboot-tools, ulogd,
+	usb_modeswitch, util-linux, valgrind, vim, vsftpd, wavpack,
+	webkit, wipe, wireless_tools, wpa_supplicant, xapp_xinit,
+	xapp_xinput-calibrator, xapp_xman, xapp_xmh, xlib_libX11,
+	xlib_libXdmcp, xlib_libXft, xlib_libpthread-stubs,
+	xlib_xtrans, xproto_xcmiscproto, xproto_xextproto,
+	xserver_xorg-server, xstroke, xvkbd, xz
+
+	New packages: b43-firmware, b43-fwcutter, bustle,
+	cache-calibrator, cegui06, celt051, classpath, curlftpfs,
+	dvb-apps, dvbsnoop, elfutils, enlightenment, firmware-imx,
+	flashbench, gd, gesftpserver, gst-fsl-plugins, httping, iftop,
+	imx-lib, jamvm, jpeg-turbo, keyutils, libatasmart, libcofi,
+	libebml, libevas-generic-loaders, libfslcodec, libfslparser,
+	libfslvpuwrap, libgsasl, libiscsi, libmatroska, libmcrypt,
+	libmhash, libqwt, libseccomp, libsha1, linenoise, mcrypt,
+	media-ctl, ncdu, neard, neardal, nettle, perf, polkit,
+	proxychains, python-bottle, python-pyparsing, rpi-firmware,
+	rpi-userland, sg3_utils, slirp, snowball-hdmiservice, spice,
+	spice-protocol, tcllib, tvheadend, udisks, usbredir
+	ux500-firmware, vde2, xcb-utils-keysyms, yavta,
+	zd1211-firmware
+
+	Removed packages: customize, xdriver_xf86-input-{acecad,aiptek},
+	xdriver_xf86-video-{apm,chips,i740,rendition,s3,s3virge,sisusb},
+	xdriver_xf86-video-sun{cg14,cg3,cg6,ffb,leo,tcx},
+	xdriver_xf86-video-{tsend,xgi,xgixp}
+
+	Deprecated packages: xstroke
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#4237: building shared openssl w/-Os fails due to gcc bug
+	#5690: python3 does not obey to BR2_PACKAGE_PYTHON3_PYC_ONLY=y
+	#5602: python3 should install a "python" symbolic link
+	#5846: Extra slash added to last slash in URL
+
+2012.11.1, Released January 3rd, 2013:
+
+	Toolchain: Fixed non-largefile builds on recent Ubuntu
+	versions.
+
+	Arch: fix missing x86/generic handling, Build for Xtensa with
+	longcalls option.
+
+	Updated/fixed packages: dosfstools, qt
+
+2012.11, Released December 2nd, 2012:
+
+	Git shallow clone fix for older git version.
+
+	Updated/fixed packages: ctuio, libtool
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#5726: List all the available hook points
+
+2012.11-rc2, Released November 30th, 2012:
+
+	Minor fixes around the tree.
+
+	Various manual updates and fixes.
+
+	Add checks for legacy features.
+
+	Updated/fixed packages: acpid, alsa-lib, arptables, binutils,
+	busybox, ccache, cjson, cramfs, directfb, flex, fluxbox, gdb,
+	hiawatha, igh-ethercat, imagemagick, imlib2, lcdproc,
+	libdaemon, libecore, libhid, libmad, libpcap, libsigc, libusb,
+	linux-fusion, matchbox, ocf-linux, owl-linux, python, rrdtool,
+	scons, strace, sylpheed
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#5732: Error : package/alsa-lib/alsa-lib.mk
+
+2012.11-rc1, Released November 17th, 2012
+
+	Fixes all over the tree and new features.
+
+	Defconfigs: use u-boot 2012.10 on at91 and beaglebone,
+	sheevaplug + qemu: bump kernel version, add qemu-mips64-malta
+	+ nitrogen6x defconfigs.
+
+	Bootloaders: add u-boot 2012.07/10, ais target format, add
+	barebox 2012.08/09/10/11, linker overlap issue fix for
+	at91bootstrap, mxs-bootlets updated for new Barebox versions.
+
+	Toolchains: binutils 2.23.1, gcc 4.7.2, default to gcc 4.6.x,
+	Codebench arm/sh/x86 2012.03/09, Linaro 2012.08/09/10.
+	Libtirpc support for modern glibc variants. Toolchain on
+	target has been deprecated.
+
+	Initial Aarch64 support, Xtensa support re-added.
+
+	Infrastructure: Use shallow git clone when possible, use
+	tarballs rather than git URLs for github. Moved to pkgconf
+	rather than pkg-config. System directory added, default
+	skeleton/device tables moved. More than 1 post-build script
+	can now be used. output/target now contains a
+	THIS_IS_NOT_YOUR_ROOT_FILESYSTEM warning, to help people
+	understand how to (not) use it.
+
+	Manual has been reworked and extended.
+
+	Legal-info: Lots of package annotations, CSV file fixes,
+	_LICENSE / _REDISTRIBUTE splitup, per-package hooks.
+
+	Updated/fixed packages: acpid, alsa-lib, alsa-utils,
+	alsamixergui, attr, autoconf, automake, bash, bind, binutils,
+	bison, blackbox, bluez-utils, busybox, cairo, can-utils,
+	cifs-utils, cjson, cmake, collectd, connman, conntrack-tools,
+	coreutils, cups, cvs, dbus, dhcp, directfb, dmalloc, dnsmasq,
+	dropbear, e2fsprogs, ethtool, fbdump, feh, fftw, file,
+	flashrom, fluxbox, gdb, gdisk, gdk-pixbuf, genext2fs, gettext,
+	gnutls, gpsd, gqview, grep, gsl, gst-plugins-{bad,good},
+	hdparm, hiawatha, hostapd, input-tools, iproute2, ipset,
+	iptables, iw, json-c, kexec, kmod, lcdproc, leafpad, less,
+	libcurl, libdrm, libdvdnav, libdvdread, libffi, libfuse,
+	libglib2, libhid, liblockfile, libmad, libmbus, libmnl,
+	libnetfilter_{acct,conntrack,cthelper,cttimeout,queue},
+	libnfc, libnfc-llcp, libnfnetlink, libnl, libnspr, libnss,
+	libpcap, libplayer, libtool, libtorrent, liburcu, libv4l,
+	libxcb, libxml2, libxslt, links, linux-firmware, lm-sensors,
+	lmbench, lockfile-progs, logrotate, lshw, lsof,
+	lttng-babeltrace, lttng-tools, lua, luajit, mesa3d, microperl,
+	mii-diag, module-init-tools, mpc, mpd, mpg123, mplayer,
+	mtd-utils, mysql_client, nbd, ncurses, netatalk, netkitbase,
+	netkittelnet, netsnmp, newt, nfs-utils, openntpd, openssh,
+	openssl, opkg, patch, pciutils, pcre, php, poco, polarssl,
+	popt, portmap, pppd, procps, pulseaudio, python, python-nfc,
+	python-protobuf, qt, quota, rp-pppoe, rtorrent, sam-ba, samba,
+	scons, sdl_gfx, smartmontools, sqlite, squid, strace, sudo,
+	sylpheed, tcpdump, tremor, ttcp, tiff, unionfs,
+	usb_modeswitch, usbutils, util-linux, vala, valgrind, vpnc,
+	vsftpd, webkit, wget, which, wpa_supplicant, x11vnc, xapp_*,
+	xdriver_*, xenomai, xfont_*, xinetd, xl2tp, xlib_*, xlsclient,
+	xproto_*, xserver_xorg-server, xutil_util-macros, xz, zeromq
+
+	New packages: arptables, at91bootstrap3, boot-wrapper-aarch64,
+	ccid, cpanminus, cpuload, erlang, evtest, fb-test-apps,
+	fxload, gdbm, gnupg, googlefontdirectory, grantlee, gsl,
+	lcdapi, liblo, liblog4c-localtime, libtirpc, linux-pam,
+	lua-msgpack-native, macchanger, mtdev, mtdev2tuio, nfacct,
+	opus, opus-tools, pcsc-lite, perl, pkgconf, python-meld3,
+	python3, qemu, qextserialport, qtuio, rpcbind, schifra,
+	sconeserver, supervisor, time, ulogd, usb_modeswitch_data,
+	yasm
+
+	Deprecated packages: netkitbase, netkittelnet
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#807:  [PATCH] samba - make iconv and smbd optional
+	#3049: binutils have a sysroot bug in ld
+	#5330: update vsftpd to 3.0.0
+	#5486: libglib2 build fails on: libs/libglib-2.0.so: undefined...
+	#5666: Fails to build python 2.7.2 for 2440 arm
+
+2012.08, Release August 31th, 2012
+
+	Updated/fixed packages: microperl, cups, luajit, rrdtool,
+	prboom, oprofile.
+
+	Added license information for: sqlite.
+
+	Changed the source URLs of all packages located on Sourceforge
+	in order to use the automatic mirror selection URL
+	downloads.sourceforge.net, and get rid of the
+	BR2_SOURCEFORGE_MIRROR option.
+
+2012.08-rc3, Released August 25th, 2012
+
+	Updated/fixed packages: libglib2, netsnmp, freetype, libfuse,
+	libpng, x11vnc, zlib, gpsd, ifplugd, bash, distcc.
+
+	Added license informations for: barebox, grub, syslinux,
+	uboot, xloader, yajl, zlib, zxing, alsa-lib, alsa-utils,
+	faad2, nano, fbdump, rsync, librsync, fontconfig,
+	inotify-tools,
+
+2012.08-rc2, Released August 15th, 2012
+
+	Updated/fixed packages: imagemagick, sudo, crosstool-ng.
+
+	Added license informations for: mxml, nanocom, empty, expat,
+	lua, lucjson, xinetd, cjson, luaexpat, lmbench, bwm-ng,
+	input-event-daemon, luajit, cgilua, copas, coxpcall,
+	luafilesystem, luasocket, rings, wsapi, xavante, libtpl,
+	avahi, busybox, libfcgi, ifplugd, libcgicc, libcurl,
+	libdaemon, libdnet, libgpg-error, libpcap, libpng, lighttpd,
+	mtd, openssl, psmisc, socat, spawn-fcgi.
+
+	Fixes to Microblaze external toolchains
+	configuration. Improvements of the pkg-stats
+	script. Out-of-tree fix for the graph-depends script.
+
+	Kernel headers version bump.
+
+2012.08-rc1, Released August 1st, 2012
+
+	Fixes all over the tree and new features.
+
+	Integration of a legal information reporting infrastructure,
+	which allows to generate detailed informations about the
+	licenses and source code of all components of a system
+	generated by Buildroot. License information will progressively
+	be added on packages.
+
+	Default configuration files added for Calao-systems USB-A9263
+	and Calao-systems USB-A9G20-LPW.
+
+	External toolchains update: allow download of a custom
+	toolchain, add Linaro 2012.05 and 2012.06 for ARM, add
+	Blackfin toolchain 2012R1-BETA1, add Sourcery CodeBench MIPS
+	2011.09.
+
+	Allow the restriction of downloads to the primary site only.
+        This is useful for project developers who want to ensure that
+        the project can be built even if the upstream tarball
+        locations disappear.
+
+	Add a 'System configuration' choice to select between 3
+	different init systems: Busybox init, SysV init and Systemd
+	init.
+
+	Cleanups to the package infrastructure. The visible change to
+	developers is that $(eval $(call AUTOTARGETS)) is now $(eval
+	$(autotools-package)), and similarly for other package
+	infrastructures and host packages. Refer to the documentation
+	for details.
+
+	By default, automatic detection of the number of compilation
+	jobs to use, depending on the number of CPUs available.
+
+	Improvements to generate systems with static libraries only
+	(infrastructure and package fixes).
+
+	Add proper support in the Linux kernel package to generate
+	Device Tree Blobs or combined Device Tree / Kernel
+	images. This will be useful on Microblaze, PowerPC and ARM,
+	which are architectures making extensive use of the Device
+	Tree.
+
+	Updated/fixed packages: audiofile, autoconf, automake, axel,
+	barebox, bash, beecrypt, berkeleydb, bind, bison, bluez_utils,
+	bonnie, boost, busybox, bsdiff, bwm-ng, bzip2, cifs-utils,
+	cgilua, cmake, connman, conntrack-tools, crosstool-ng, cups,
+	dbus, dhcp, dnsmasq, e2fsprogs, eeprog, ethtool, faad2, fbv,
+	ffmpeg, freetype, gmp, gnutls, gob2, gpsd, grep,
+	gst-plugins-base, gst-plugins-good, gzip, hiawatha, hostapd,
+	htop, icu, igh-ethercat, imagemagick, input-tools, iostat,
+	iproute2, ipset, iptables, iw, kmod, less, libcap, libgci,
+	libconfig, libcurl, libelf, libevas, libeXosip2, libexif,
+	libfuse, libidn, libmad, libmbus, libmnl,
+	libnetfilter-conntrack, libnl, libnspr, libnss, libogg,
+	libosip2, libpcap, libpng, libroxml, liburcu, libusb, libxml2,
+	libxslt, lighttpd, linux, ltrace, lttng-libust, lttng-modules,
+	lttng-tools, lua, m4, memtester, midori, mii-diag,
+	module-init-tools, mpfr, mpg123, mrouted, msmtp, mtd, mxml,
+	mysql_client, nasm, nbd, ncurses, nfs-utils, opencv, openocd,
+	openssl, pciutils, php, polarssl, portaudio, pppd,
+	pthread-stubs, pulseaudio, qt, quagga, quota, radvd, rpm,
+	rrdtool, samba, sam-ba, scons, sdl_gfx, sdl_sound, speex,
+	sqlite, squashfs, squid, sudo, synergy, syslinux, systemd,
+	tar, tcpdump, tcpreplay, udev, usbutils, valgrind, wget,
+	wpa_supplicant, wsapi, xavante, xserver_xorg-server, zlib
+
+	New packages: cjson, collectd, dfu-util, dmidecode, elftosb,
+	fbterm, flashrom, freerdp, inadyn, libfreefare,
+	libnetfilter_cttimeout, libnfc, libnfc-llcp, liboping,
+	libtorrent, linphone, logsurfer, lshw, luacjson, luaexpat,
+	luajit, mediastreamer, mobile-broadband-provider-info, monit,
+	mxs-bootlets, nanocom, nss-mdns, ofone, omap-u-boot-utils,
+	opkg, ortp, owl-linux, python-id3, python-nfc, quota,
+	ramspeed, rtorrent, sound-theme-borealis,
+	sound-theme-freedesktop, sysprof, webrtc-audio-processing,
+	xinetd, zxing
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#1315: Allow use of older external toolchains without sysroot
+               support [won't fix]
+	#5276: Hiawatha needs to manage IPV6 if so [fixed]
+	#5360: buildroot fails when building "host-libglib2 2.30.2
+               Building" [won't fix, upstream problem]
+	#5384: Can't build packages relying on gets on newer glibc
+               [fixed]
+
 2012.05, Released May 30th, 2012:
 
 	Updated/fixed packages: busybox, netsnmp, pptp-linux

Config.in

@@ -10,7 +10,17 @@ config BR2_VERSION
 	string
 	option env="BR2_VERSION_FULL"
 
-source "target/Config.in.arch"
+config BR2_HOSTARCH
+	string
+	option env="HOSTARCH"
+
+# Hidden boolean selected by pre-built packages for x86, when they
+# need to run on x86-64 machines (example: pre-built external
+# toolchains, binary tools like SAM-BA, etc.).
+config BR2_HOSTARCH_NEEDS_IA32_LIBS
+	bool
+
+source "arch/Config.in"
 
 menu "Build options"
 
@@ -85,6 +95,18 @@ config BR2_TAR_OPTIONS
 
 endmenu
 
+config BR2_DEFCONFIG_FROM_ENV
+	string
+	option env="BR2_DEFCONFIG"
+
+config BR2_DEFCONFIG
+	string "Location to save buildroot config"
+	default BR2_DEFCONFIG_FROM_ENV if BR2_DEFCONFIG_FROM_ENV != ""
+	default "$(CONFIG_DIR)/defconfig"
+	help
+	  When running 'make savedefconfig', the defconfig file will be saved
+	  in this location.
+
 config BR2_DL_DIR
 	string "Download dir"
 	default "$(TOPDIR)/dl"
@@ -119,6 +141,22 @@ config BR2_PRIMARY_SITE
 	  NOTE: This works for all packages using the central package
 	  infrastructure (generic, autotools, cmake, ...)
 
+config BR2_PRIMARY_SITE_ONLY
+	bool "Only allow downloads from primary download site"
+	depends on BR2_PRIMARY_SITE != ""
+	help
+	  If this option is enabled, downloads will only be attempted
+	  from the primary download site. Other locations, like the
+	  package's official download location or the backup download
+	  site, will not be considered. Therefore, if the package is
+	  not present on the primary site, the download fails.
+
+	  This is useful for project developers who want to ensure
+	  that the project can be built even if the upstream tarball
+	  locations disappear.
+
+if !BR2_PRIMARY_SITE_ONLY
+
 config BR2_BACKUP_SITE
 	string "Backup download site"
 	default "http://sources.buildroot.net/"
@@ -127,18 +165,6 @@ config BR2_BACKUP_SITE
 	  will fall back to download package sources from here if the
 	  normal location fails.
 
-config BR2_SOURCEFORGE_MIRROR
-	string "Sourceforge mirror site"
-	default "kent"
-	help
-	  Sourceforge has a system of mirror sites.  Some sites may be
-	  closer to your location, and sometimes mirror sites go down
-	  and are no longer available.  This option allows you to select
-	  your preferred Sourceforge mirror site.
-
-	  The list of mirrors is available here:
-	  http://sourceforge.net/apps/trac/sourceforge/wiki/Mirrors
-
 config BR2_KERNEL_MIRROR
 	string "Kernel.org mirror"
 	default "http://www.kernel.org/pub/"
@@ -175,13 +201,17 @@ config BR2_DEBIAN_MIRROR
 	  Usually, just add your country code like XX here:
 	  http://ftp.XX.debian.org
 
+endif
+
 endmenu
 
 config BR2_JLEVEL
-	int "Number of jobs to run simultaneously"
-	default "2"
+	int "Number of jobs to run simultaneously (0 for auto)"
+	default "0"
 	help
-	  Number of jobs to run simultaneously
+	  Number of jobs to run simultaneously.  If 0, determine
+	  automatically according to number of CPUs on the host
+	  system.
 
 config BR2_CCACHE
 	bool "Enable compiler cache"
@@ -283,6 +313,25 @@ config BR2_STRIP_none
 	  filesystem.
 endchoice
 
+config BR2_STRIP_EXCLUDE_FILES
+	string "executables that should not be stripped"
+	depends on !BR2_STRIP_none
+	default ""
+	help
+	  You may specify a space-separated list of binaries and libraries
+	  here that should not be stripped on the target.
+
+config BR2_STRIP_EXCLUDE_DIRS
+	string "directories that should be skipped when stripping"
+	depends on !BR2_STRIP_none
+	default ""
+	help
+	  You may specify a space-separated list of directories that should
+	  be skipped when stripping. Binaries and libraries in these
+	  directories will not be touched.
+	  The directories should be specified relative to the target directory,
+	  without leading slash.
+
 choice
 	prompt "gcc optimization level"
 	default BR2_OPTIMIZE_S
@@ -362,18 +411,14 @@ config BR2_PREFER_STATIC_LIB
 
 config BR2_HAVE_DOCUMENTATION
 	bool "documentation on the target"
+	# We no longer want to support a toolchain on the target
+	depends on BR2_DEPRECATED
 	help
 	  Install the documentation, including manual pages and info
 	  pages, on the target.
 	  If you say n here, your target will not contain any
 	  documentation.
 
-config BR2_HAVE_DEVFILES
-	bool "development files in target filesystem"
-	help
-	  Install headers and static libraries in the
-	  target filesystem
-
 config BR2_PACKAGE_OVERRIDE_FILE
 	string "location of a package override file"
 	default "$(TOPDIR)/local.mk"
@@ -384,18 +429,35 @@ config BR2_PACKAGE_OVERRIDE_FILE
 	  as the source directory for a particular package. See the
 	  Buildroot documentation for more details on this feature.
 
+config BR2_GLOBAL_PATCH_DIR
+	string "global patch directory"
+	help
+	  You may specify a directory containing global package patches.
+	  For a specific version <packageversion> of a specific package
+	  <packagename>, patches are applied as follows.
+
+	  First, the default Buildroot patch set for the package is applied.
+
+	  If the directory $(BR2_GLOBAL_PATCH_DIR)/<packagename>/<packageversion>
+	  exists, then all *.patch files in the directory will be applied.
+
+	  Otherwise, if the directory $(BR2_GLOBAL_PATCH_DIR)/<packagename> exists,
+	  then all *.patch files in the directory will be applied.
+
 endmenu
 
 source "toolchain/Config.in"
 
-source "target/generic/Config.in"
+source "system/Config.in"
+
+source "linux/Config.in"
 
 source "package/Config.in"
 
-source "package/Config.in.host"
-
 source "fs/Config.in"
 
 source "boot/Config.in"
 
-source "linux/Config.in"
+source "package/Config.in.host"
+
+source "Config.in.legacy"

Config.in.legacy

@@ -0,0 +1,255 @@
+#
+# Config.in.legacy - support for backward compatibility
+#
+# When an existing Config.in symbol is removed, it should be added again in this
+# file, and take appropriate action to approximate backward compatibility. If
+# there is an equivalent (set of) new symbols, these can just be select'ed by
+# the old symbol. This makes sure that running 'make oldconfig' will make things
+# "just work" when upgrading to a new buildroot version. If the change is too
+# fundamental and cannot be fixed by a simple select, then the old symbol should
+# select BR2_LEGACY.  If that symbol is set, the build will issue an error.
+#
+# When adding legacy symbols to this file, add them to the front. The oldest
+# symbols will be removed again after about two years.
+#
+# The symbol should be copied as-is from the place where it was previously
+# defined, but the help text should be removed or replaced with something that
+# explains how to fix it.
+
+config BR2_LEGACY
+	bool
+	help
+	  This option is selected automatically when your old .config uses an
+	  option that no longer exists in current buildroot. In that case, the
+	  build will fail. Look for config options which are selected in the
+	  menu below: they no longer exist and should be replaced by something
+	  else.
+
+# This comment fits exactly in a 80-column display
+comment "Legacy detected: check the content of the menu below"
+	depends on BR2_LEGACY
+
+menu "Legacy config options"
+
+if BR2_LEGACY
+comment "Your old configuration uses legacy options that no  "
+comment "longer exist in buildroot.                          "
+comment "Please look at the options which have been selected "
+comment "and read their help text.                           "
+comment "As long as these options stay selected, the build   "
+comment "will fail.                                          "
+comment "Note: at some point in the future, the oldest legacy"
+comment "options will be removed, and configuration files    "
+comment "that still have those options set, will fail to     "
+comment "build, or run, in unpredictable ways.               "
+endif
+
+###############################################################################
+comment "Legacy options removed in 2013.08"
+
+config BR2_ARM_OABI
+	bool "ARM OABI support has been removed"
+	select BR2_LEGACY
+	help
+	  The support for the ARM OABI was deprecated since a while,
+	  and has been removed completely from Buildroot. It is also
+	  deprecated in upstream gcc, since gcc 4.7. People should
+	  switch to EABI instead, which should not be a problem as
+	  long as you don't have pre-built OABI binaries in your
+	  system that you can't recompile.
+
+config BR2_PACKAGE_DOSFSTOOLS_DOSFSCK
+	bool "dosfstools dosfsck renamed to fsck.fat"
+	select BR2_LEGACY
+	select BR2_PACKAGE_DOSFSTOOLS_FSCK_FAT
+	help
+	  dosfsck was renamed upstream to fsck.fat for consistency.
+
+config BR2_PACKAGE_DOSFSTOOLS_DOSFSLABEL
+	bool "dosfstools dosfslabel renamed to fatlabel"
+	select BR2_LEGACY
+	select BR2_PACKAGE_DOSFSTOOLS_FATLABEL
+	help
+	  doslabel was renamed upstream to fatlabel for consistency.
+
+config BR2_PACKAGE_DOSFSTOOLS_MKDOSFS
+	bool "dosfstools mkdosfs renamed to mkfs.fat"
+	select BR2_LEGACY
+	select BR2_PACKAGE_DOSFSTOOLS_MKFS_FAT
+	help
+	  mkdosfs was renamed upstream to mkfs.fat for consistency.
+
+config BR2_ELF2FLT
+	bool "the elf2flt option has been renamed"
+	select BR2_LEGACY
+	help
+	  The BR2_ELF2FLT option has been renamed to
+	  BR2_PACKAGE_HOST_ELF2FLT due to the conversion of elf2flt to
+	  the package infrastructure.
+
+config BR2_VFP_FLOAT
+	bool "the ARM VFP floating point option has been renamed"
+	select BR2_LEGACY
+	help
+	  Due to a major refactoring of the floating-point handling of
+	  the ARM architecture support, the BR2_VFP_FLOAT option has
+	  been replaced with a choice of options that allows to select
+	  between various VFP versions/capabilities.
+
+###############################################################################
+comment "Legacy options removed in 2013.05"
+
+config BR2_PACKAGE_LINUX_FIRMWARE_RTL_8192
+	bool "Realtek 8192 replaced by Realtek 81xx"
+	select BR2_LEGACY
+	select BR2_PACKAGE_LINUX_FIRMWARE_RTL_81XX
+	help
+	  Now covers the whole Realtek 81xx familly: 8188/8192.
+
+config BR2_PACKAGE_LINUX_FIRMWARE_RTL_8712
+	bool "Realtek 8712 replaced by Realtek 87xx"
+	select BR2_LEGACY
+	select BR2_PACKAGE_LINUX_FIRMWARE_RTL_87XX
+	help
+	  Now covers the whole Realtek 87xx familly: 8712/8723.
+
+###############################################################################
+comment "Legacy options removed in 2013.02"
+
+config BR2_sa110
+	bool "sa110 ARM target switched to strongarm"
+	select BR2_LEGACY
+	select BR2_strongarm
+	help
+	  The SA110 is the same as a generic StrongARM, it just differs
+	  in speed, peripherals and cache.
+
+config BR2_sa1100
+	bool "sa1100 ARM target switched to strongarm"
+	select BR2_LEGACY
+	select BR2_strongarm
+	help
+	  The SA1100 is the same as a generic StrongARM, it just differs
+	  in speed, peripherals and cache.
+
+config BR2_PACKAGE_GDISK
+	bool "gdisk has been replaced by gptfdisk"
+	select BR2_LEGACY
+	select BR2_PACKAGE_GPTFDISK
+	help
+	  The option has been renamed BR2_PACKAGE_GPTFDISK.
+
+config BR2_PACKAGE_GDISK_GDISK
+	bool "gdisk tool from gdisk has been replaced by gdisk in gptfdisk"
+	select BR2_LEGACY
+	select BR2_PACKAGE_GPTFDISK
+	select BR2_PACKAGE_GPTFDISK_GDISK
+	help
+	  The option has been renamed BR2_PACKAGE_GPTFDISK_GDISK.
+
+config BR2_PACKAGE_GDISK_SGDISK
+	bool "sgdisk tool from gdisk has been replaced by sgdisk in gptfdisk"
+	select BR2_LEGACY
+	select BR2_PACKAGE_GPTFDISK
+	select BR2_PACKAGE_GPTFDISK_SGDISK
+	help
+	  The option has been renamed BR2_PACKAGE_GPTFDISK_SGDISK.
+
+config BR2_PACKAGE_GDB_HOST
+	bool "gdb for the host option has been renamed"
+	select BR2_PACKAGE_HOST_GDB
+	select BR2_LEGACY
+	help
+	  Due to the conversion of gdb to the package infrastructure,
+	  the BR2_PACKAGE_GDB_HOST option has been renamed
+	  BR2_PACKAGE_HOST_GDB.
+
+config BR2_PACKAGE_DIRECTB_DITHER_RGB16
+	bool "DirectFB RGB16 dithering option has been renamed"
+	select BR2_PACKAGE_DIRECTFB_DITHER_RGB16
+	select BR2_LEGACY
+	help
+	  The option has been renamed
+	  BR2_PACKAGE_DIRECTFB_DITHER_RGB16.
+
+config BR2_PACKAGE_DIRECTB_TESTS
+	bool "DirectFB Tests option has been renamed"
+	select BR2_PACKAGE_DIRECTFB_TESTS
+	select BR2_LEGACY
+	help
+	  The option has been renamed
+	  BR2_PACKAGE_DIRECTFB_TESTS.
+
+###############################################################################
+comment "Legacy options removed in 2012.11"
+
+config BR2_PACKAGE_CUSTOMIZE
+	bool "customize package has been removed"
+	select BR2_LEGACY
+	help
+	  The 'customize' special package has been removed. Instead,
+	  we recommend to create either your own packages, or use a
+	  post-build script to customize your root filesystem. See
+	  Buildroot's documentation for more details.
+
+config BR2_PACKAGE_XSERVER_xorg
+	bool "X.org modular server"
+	select BR2_LEGACY
+	select BR2_PACKAGE_XSERVER_XORG_SERVER_MODULAR
+	help
+	  The option has been renamed
+	  BR2_PACKAGE_XSERVER_XORG_SERVER_MODULAR.
+
+config BR2_PACKAGE_XSERVER_tinyx
+	bool "KDrive / TinyX server"
+	select BR2_LEGACY
+	select BR2_PACKAGE_XSERVER_XORG_SERVER_KDRIVE
+	help
+	  The option has been renamed
+	  BR2_PACKAGE_XSERVER_XORG_SERVER_KDRIVE.
+
+config BR2_PACKAGE_PTHREAD_STUBS
+	bool "pthread-stubs option has been renamed"
+	select BR2_LEGACY
+	select BR2_PACKAGE_XLIB_LIBPTHREAD_STUBS
+	depends on BR2_PACKAGE_XORG7
+	help
+	  For consistency reason, the pthread-stubs package has been
+	  renamed to xlib_libpthread-stubs.
+
+###############################################################################
+comment "Legacy options removed in 2012.08"
+
+config BR2_PACKAGE_GETTEXT_STATIC
+	bool "libgettext.a is now selected by BR2_PREFER_STATIC_LIB"
+	select BR2_LEGACY
+	help
+	  To build a static gettext library, select BR2_PREFER_STATIC_LIB.
+
+
+config BR2_PACKAGE_LIBINTL
+	bool "libintl"
+	select BR2_LEGACY
+	select BR2_PACKAGE_GETTEXT
+	help
+	  libintl is now installed by selecting BR2_PACKAGE_GETTEXT. This now
+	  only installs the library, not the executables.
+
+config BR2_PACKAGE_INPUT_TOOLS_EVTEST
+	bool "input-tools evtest is now a separate package evtest"
+	select BR2_LEGACY
+	select BR2_PACKAGE_EVTEST
+	help
+	  The evtest program from input-tools is now a separate package.
+
+config BR2_BFIN_FDPIC
+	bool "BR2_BFIN_FDPIC is now BR2_BINFMT_FDPIC"
+	select BR2_BINFMT_FDPIC
+	select BR2_LEGACY
+
+config BR2_BFIN_FLAT
+	bool "BR2_BFIN_FLAT is now BR2_BINFMT_FLAT"
+	select BR2_BINFMT_FLAT
+	select BR2_LEGACY
+
+endmenu

Makefile

@@ -1,7 +1,7 @@
 # Makefile for buildroot2
 #
 # Copyright (C) 1999-2005 by Erik Andersen <andersen@codepoet.org>
-# Copyright (C) 2006-2012 by the Buildroot developers <buildroot@uclibc.org>
+# Copyright (C) 2006-2013 by the Buildroot developers <buildroot@uclibc.org>
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -24,7 +24,7 @@
 #--------------------------------------------------------------
 
 # Set and export the version string
-export BR2_VERSION:=2012.05
+export BR2_VERSION:=2013.08
 
 # Check for minimal make version (note: this check will break at make 10.x)
 MIN_MAKE_VERSION=3.81
@@ -32,6 +32,16 @@ ifneq ($(firstword $(sort $(MAKE_VERSION) $(MIN_MAKE_VERSION))),$(MIN_MAKE_VERSI
 $(error You have make '$(MAKE_VERSION)' installed. GNU make >= $(MIN_MAKE_VERSION) is required)
 endif
 
+export HOSTARCH := $(shell uname -m | \
+	sed -e s/i.86/x86/ \
+	    -e s/sun4u/sparc64/ \
+	    -e s/arm.*/arm/ \
+	    -e s/sa110/arm/ \
+	    -e s/ppc64/powerpc/ \
+	    -e s/ppc/powerpc/ \
+	    -e s/macppc/powerpc/\
+	    -e s/sh.*/sh/)
+
 # This top-level Makefile can *not* be executed in parallel
 .NOTPARALLEL:
 
@@ -46,9 +56,9 @@ DATE:=$(shell date +%Y%m%d)
 export BR2_VERSION_FULL:=$(BR2_VERSION)$(shell $(TOPDIR)/support/scripts/setlocalversion)
 
 noconfig_targets:=menuconfig nconfig gconfig xconfig config oldconfig randconfig \
-	defconfig %_defconfig savedefconfig allyesconfig allnoconfig silentoldconfig release \
+	%_defconfig allyesconfig allnoconfig silentoldconfig release \
 	randpackageconfig allyespackageconfig allnopackageconfig \
-	source-check print-version
+	source-check print-version olddefconfig
 
 # Strip quotes and then whitespaces
 qstrip=$(strip $(subst ",,$(1)))
@@ -81,14 +91,11 @@ EXTRAMAKEARGS = O=$(O)
 NEED_WRAPPER=y
 endif
 
+BUILDROOT_CONFIG=$(CONFIG_DIR)/.config
+
 # Pull in the user's configuration file
 ifeq ($(filter $(noconfig_targets),$(MAKECMDGOALS)),)
--include $(CONFIG_DIR)/.config
-endif
-
-# Override BR2_DL_DIR if shell variable defined
-ifneq ($(BUILDROOT_DL_DIR),)
-BR2_DL_DIR:=$(BUILDROOT_DL_DIR)
+-include $(BUILDROOT_CONFIG)
 endif
 
 # To put more focus on warnings, be less verbose as default
@@ -165,6 +172,17 @@ HOSTNM:=$(shell which $(HOSTNM) || type -p $(HOSTNM) || echo nm)
 export HOSTAR HOSTAS HOSTCC HOSTCXX HOSTFC HOSTLD
 export HOSTCC_NOCCACHE HOSTCXX_NOCCACHE
 
+# Make sure pkg-config doesn't look outside the buildroot tree
+unexport PKG_CONFIG_PATH
+unexport PKG_CONFIG_SYSROOT_DIR
+
+# Having DESTDIR set in the environment confuses the installation
+# steps of some packages.
+unexport DESTDIR
+
+# Causes breakage with packages that needs host-ruby
+unexport RUBYOPT
+
 # bash prints the name of the directory on 'cd <dir>' if CDPATH is
 # set, so unset it here to not cause problems. Notice that the export
 # line doesn't affect the environment of $(shell ..) calls, so
@@ -178,11 +196,11 @@ BUILD_DIR:=$(BASE_DIR)/build
 
 ifeq ($(BR2_HAVE_DOT_CONFIG),y)
 
-#############################################################
+################################################################################
 #
 # Hide troublesome environment variables from sub processes
 #
-#############################################################
+################################################################################
 unexport CROSS_COMPILE
 unexport ARCH
 unexport CC
@@ -192,25 +210,30 @@ unexport CFLAGS
 unexport CXXFLAGS
 unexport GREP_OPTIONS
 unexport CONFIG_SITE
+unexport QMAKESPEC
+unexport TERMINFO
 
 GNU_HOST_NAME:=$(shell support/gnuconfig/config.guess)
 
-##############################################################
+################################################################################
 #
 # The list of stuff to build for the target toolchain
 # along with the packages to build for the target.
 #
-##############################################################
+################################################################################
 
 ifeq ($(BR2_CCACHE),y)
 BASE_TARGETS += host-ccache
 endif
 
 ifeq ($(BR2_TOOLCHAIN_BUILDROOT),y)
-BASE_TARGETS += uclibc-configured host-binutils cross_compiler uclibc-target-utils kernel-headers
-else
-BASE_TARGETS += uclibc
+BASE_TARGETS += toolchain-buildroot
+else ifeq ($(BR2_TOOLCHAIN_EXTERNAL),y)
+BASE_TARGETS += toolchain-external
+else ifeq ($(BR2_TOOLCHAIN_CTNG),y)
+BASE_TARGETS += toolchain-crosstool-ng
 endif
+
 TARGETS:=
 
 # silent mode requested?
@@ -218,13 +241,13 @@ QUIET:=$(if $(findstring s,$(MAKEFLAGS)),-q)
 
 # Strip off the annoying quoting
 ARCH:=$(call qstrip,$(BR2_ARCH))
-ifeq ($(ARCH),xtensa)
-ARCH:=$(ARCH)_$(call qstrip,$(BR2_xtensa_core_name))
-endif
 
 KERNEL_ARCH:=$(shell echo "$(ARCH)" | sed -e "s/-.*//" \
 	-e s/i.86/i386/ -e s/sun4u/sparc64/ \
+	-e s/arcle/arc/ \
+	-e s/arceb/arc/ \
 	-e s/arm.*/arm/ -e s/sa110/arm/ \
+	-e s/aarch64/arm64/ \
 	-e s/bfin/blackfin/ \
 	-e s/parisc64/parisc/ \
 	-e s/powerpc64/powerpc/ \
@@ -247,8 +270,19 @@ STAMP_DIR:=$(BASE_DIR)/stamps
 
 BINARIES_DIR:=$(BASE_DIR)/images
 TARGET_DIR:=$(BASE_DIR)/target
-TOOLCHAIN_DIR=$(BASE_DIR)/toolchain
-TARGET_SKELETON=$(TOPDIR)/fs/skeleton
+TARGET_SKELETON=$(TOPDIR)/system/skeleton
+
+LEGAL_INFO_DIR=$(BASE_DIR)/legal-info
+REDIST_SOURCES_DIR=$(LEGAL_INFO_DIR)/sources
+LICENSE_FILES_DIR=$(LEGAL_INFO_DIR)/licenses
+LEGAL_MANIFEST_CSV=$(LEGAL_INFO_DIR)/manifest.csv
+LEGAL_LICENSES_TXT=$(LEGAL_INFO_DIR)/licenses.txt
+LEGAL_WARNINGS=$(LEGAL_INFO_DIR)/.warnings
+LEGAL_REPORT=$(LEGAL_INFO_DIR)/README
+
+# Location of a file giving a big fat warning that output/target
+# should not be used as the root filesystem.
+TARGET_DIR_WARNING_FILE=$(TARGET_DIR)/THIS_IS_NOT_YOUR_ROOT_FILESYSTEM
 
 ifeq ($(BR2_CCACHE),y)
 CCACHE:=$(HOST_DIR)/usr/bin/ccache
@@ -258,15 +292,30 @@ HOSTCC  := $(CCACHE) $(HOSTCC)
 HOSTCXX := $(CCACHE) $(HOSTCXX)
 endif
 
-#############################################################
+# Scripts in support/ or post-build scripts may need to reference
+# these locations, so export them so it is easier to use
+export BUILDROOT_CONFIG
+export TARGET_DIR
+export STAGING_DIR
+export HOST_DIR
+export BINARIES_DIR
+export BASE_DIR
+
+################################################################################
 #
 # You should probably leave this stuff alone unless you know
 # what you are doing.
 #
-#############################################################
+################################################################################
 
 all: world
 
+# Include legacy before the other things, because package .mk files
+# may rely on it.
+ifneq ($(BR2_DEPRECATED),y)
+include Makefile.legacy
+endif
+
 include package/Makefile.in
 include support/dependencies/dependencies.mk
 
@@ -291,8 +340,8 @@ endif
 include package/*/*.mk
 
 include boot/common.mk
-include target/Makefile.in
 include linux/linux.mk
+include system/system.mk
 
 TARGETS+=target-finalize
 
@@ -300,14 +349,20 @@ ifeq ($(BR2_ENABLE_LOCALE_PURGE),y)
 TARGETS+=target-purgelocales
 endif
 
-ifneq ($(BR2_TOOLCHAIN_EXTERNAL_GLIBC)$(BR2_TOOLCHAIN_CTNG_eglibc)$(BR2_TOOLCHAIN_CTNG_glibc),)
+ifeq ($(BR2_TOOLCHAIN_USES_GLIBC),y)
 ifneq ($(GENERATE_LOCALE),)
 TARGETS+=target-generatelocales
 endif
 endif
 
+ifeq ($(BR2_ECLIPSE_REGISTER),y)
+TARGETS+=toolchain-eclipse-register
+endif
+
 include fs/common.mk
 
+TARGETS+=target-post-image
+
 TARGETS_CLEAN:=$(patsubst %,%-clean,$(TARGETS))
 TARGETS_SOURCE:=$(patsubst %,%-source,$(TARGETS) $(BASE_TARGETS))
 TARGETS_DIRCLEAN:=$(patsubst %,%-dirclean,$(TARGETS))
@@ -331,40 +386,56 @@ HOST_DEPS = $(sort $(foreach dep,\
 		$($(dep))))
 HOST_SOURCE += $(addsuffix -source,$(sort $(TARGETS_HOST_DEPS) $(HOST_DEPS)))
 
+TARGETS_LEGAL_INFO:=$(patsubst %,%-legal-info,\
+		$(TARGETS) $(BASE_TARGETS) $(TARGETS_HOST_DEPS) $(HOST_DEPS))))
+
 # all targets depend on the crosscompiler and it's prerequisites
 $(TARGETS_ALL): __real_tgt_%: $(BASE_TARGETS) %
 
-dirs: $(DL_DIR) $(TOOLCHAIN_DIR) $(BUILD_DIR) $(STAGING_DIR) $(TARGET_DIR) \
+dirs: $(BUILD_DIR) $(STAGING_DIR) $(TARGET_DIR) \
 	$(HOST_DIR) $(BINARIES_DIR) $(STAMP_DIR)
 
 $(BASE_TARGETS): dirs $(HOST_DIR)/usr/share/buildroot/toolchainfile.cmake
 
-$(BUILD_DIR)/buildroot-config/auto.conf: $(CONFIG_DIR)/.config
+$(BUILD_DIR)/buildroot-config/auto.conf: $(BUILDROOT_CONFIG)
 	$(MAKE) $(EXTRAMAKEARGS) HOSTCC="$(HOSTCC_NOCCACHE)" HOSTCXX="$(HOSTCXX_NOCCACHE)" silentoldconfig
 
 prepare: $(BUILD_DIR)/buildroot-config/auto.conf
 
-world: prepare dirs dependencies $(BASE_TARGETS) $(TARGETS_ALL)
+toolchain: prepare dirs dependencies $(BASE_TARGETS)
 
-.PHONY: all world dirs clean distclean source outputmakefile \
+world: toolchain $(TARGETS_ALL)
+
+.PHONY: all world toolchain dirs clean distclean source outputmakefile \
+	legal-info legal-info-prepare legal-info-clean printvars \
 	$(BASE_TARGETS) $(TARGETS) $(TARGETS_ALL) \
-	$(TARGETS_CLEAN) $(TARGETS_DIRCLEAN) $(TARGETS_SOURCE) \
-	$(DL_DIR) $(TOOLCHAIN_DIR) $(BUILD_DIR) $(STAGING_DIR) $(TARGET_DIR) \
+	$(TARGETS_CLEAN) $(TARGETS_DIRCLEAN) $(TARGETS_SOURCE) $(TARGETS_LEGAL_INFO) \
+	$(BUILD_DIR) $(STAGING_DIR) $(TARGET_DIR) \
 	$(HOST_DIR) $(BINARIES_DIR) $(STAMP_DIR)
 
-#############################################################
+################################################################################
 #
 # staging and target directories do NOT list these as
 # dependencies anywhere else
 #
-#############################################################
-$(DL_DIR) $(TOOLCHAIN_DIR) $(BUILD_DIR) $(HOST_DIR) $(BINARIES_DIR) $(STAMP_DIR):
+################################################################################
+$(BUILD_DIR) $(HOST_DIR) $(BINARIES_DIR) $(STAMP_DIR) $(LEGAL_INFO_DIR) $(REDIST_SOURCES_DIR):
 	@mkdir -p $@
 
+# We make a symlink lib32->lib or lib64->lib as appropriate
+# MIPS64/n32 requires lib32 even though it's a 64-bit arch.
+ifeq ($(BR2_ARCH_IS_64)$(BR2_MIPS_NABI32),y)
+LIB_SYMLINK = lib64
+else
+LIB_SYMLINK = lib32
+endif
+
 $(STAGING_DIR):
 	@mkdir -p $(STAGING_DIR)/bin
 	@mkdir -p $(STAGING_DIR)/lib
+	@ln -snf lib $(STAGING_DIR)/$(LIB_SYMLINK)
 	@mkdir -p $(STAGING_DIR)/usr/lib
+	@ln -snf lib $(STAGING_DIR)/usr/$(LIB_SYMLINK)
 	@mkdir -p $(STAGING_DIR)/usr/include
 	@mkdir -p $(STAGING_DIR)/usr/bin
 	@ln -snf $(STAGING_DIR) $(BASE_DIR)/staging
@@ -375,25 +446,32 @@ endif
 
 $(BUILD_DIR)/.root:
 	mkdir -p $(TARGET_DIR)
-	if ! [ -d "$(TARGET_DIR)/bin" ]; then \
-		if [ -d "$(TARGET_SKELETON)" ]; then \
-			cp -fa $(TARGET_SKELETON)/* $(TARGET_DIR)/; \
-		fi; \
-	fi
-	-find $(TARGET_DIR) -type d -name CVS -print0 -o -name .svn -print0 | xargs -0 rm -rf
-	-find $(TARGET_DIR) -type f \( -name .empty -o -name '*~' \) -print0 | xargs -0 rm -rf
+	rsync -a \
+		--exclude .empty --exclude .svn --exclude .git \
+		--exclude .hg --exclude=CVS --exclude '*~' \
+		$(TARGET_SKELETON)/ $(TARGET_DIR)/
+	cp support/misc/target-dir-warning.txt $(TARGET_DIR_WARNING_FILE)
+	@ln -s lib $(TARGET_DIR)/$(LIB_SYMLINK)
+	@mkdir -p $(TARGET_DIR)/usr
+	@ln -s lib $(TARGET_DIR)/usr/$(LIB_SYMLINK)
 	touch $@
 
 $(TARGET_DIR): $(BUILD_DIR)/.root
 
+STRIP_FIND_CMD = find $(TARGET_DIR)
+ifneq (,$(call qstrip,$(BR2_STRIP_EXCLUDE_DIRS)))
+STRIP_FIND_CMD += \( $(call finddirclauses,$(TARGET_DIR),$(call qstrip,$(BR2_STRIP_EXCLUDE_DIRS))) \) -prune -o
+endif
+STRIP_FIND_CMD += -type f -perm /111
+STRIP_FIND_CMD += -not \( $(call findfileclauses,libpthread*.so* $(call qstrip,$(BR2_STRIP_EXCLUDE_FILES))) \) -print
+
 target-finalize:
-ifeq ($(BR2_HAVE_DEVFILES),y)
-	( support/scripts/copy.sh $(STAGING_DIR) $(TARGET_DIR) )
-else
-	rm -rf $(TARGET_DIR)/usr/include $(TARGET_DIR)/usr/lib/pkgconfig $(TARGET_DIR)/usr/share/aclocal
+	rm -rf $(TARGET_DIR)/usr/include $(TARGET_DIR)/usr/share/aclocal \
+		$(TARGET_DIR)/usr/lib/pkgconfig $(TARGET_DIR)/usr/share/pkgconfig \
+		$(TARGET_DIR)/usr/lib/cmake $(TARGET_DIR)/usr/share/cmake
+	find $(TARGET_DIR)/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f
 	find $(TARGET_DIR)/lib \( -name '*.a' -o -name '*.la' \) -print0 | xargs -0 rm -f
 	find $(TARGET_DIR)/usr/lib \( -name '*.a' -o -name '*.la' \) -print0 | xargs -0 rm -f
-endif
 ifneq ($(BR2_PACKAGE_GDB),y)
 	rm -rf $(TARGET_DIR)/usr/share/gdb
 endif
@@ -410,10 +488,18 @@ endif
 ifeq ($(BR2_PACKAGE_PYTHON_PYC_ONLY),y)
 	find $(TARGET_DIR)/usr/lib/ -name '*.py' -print0 | xargs -0 rm -f
 endif
-	find $(TARGET_DIR) -type f -perm +111 '!' -name 'libthread_db*.so*' | \
-		xargs $(STRIPCMD) 2>/dev/null || true
-	find $(TARGET_DIR)/lib/modules -type f -name '*.ko' | \
-		xargs -r $(KSTRIPCMD) || true
+	$(STRIP_FIND_CMD) | xargs $(STRIPCMD) 2>/dev/null || true
+	if test -d $(TARGET_DIR)/lib/modules; then \
+		find $(TARGET_DIR)/lib/modules -type f -name '*.ko' | \
+		xargs -r $(KSTRIPCMD); fi
+
+# See http://sourceware.org/gdb/wiki/FAQ, "GDB does not see any threads
+# besides the one in which crash occurred; or SIGTRAP kills my program when
+# I set a breakpoint"
+ifeq ($(BR2_TOOLCHAIN_HAS_THREADS),y)
+	find $(TARGET_DIR)/lib -type f -name 'libpthread*.so*' | \
+		xargs $(STRIPCMD) $(STRIP_STRIP_DEBUG) || true
+endif
 
 	mkdir -p $(TARGET_DIR)/etc
 	# Mandatory configuration file and auxilliary cache directory
@@ -434,10 +520,16 @@ endif
 		echo "PRETTY_NAME=\"Buildroot $(BR2_VERSION)\"" \
 	) >  $(TARGET_DIR)/etc/os-release
 
-ifneq ($(BR2_ROOTFS_POST_BUILD_SCRIPT),"")
-	@$(call MESSAGE,"Executing post-build script")
-	$(BR2_ROOTFS_POST_BUILD_SCRIPT) $(TARGET_DIR)
-endif
+	@$(foreach d, $(call qstrip,$(BR2_ROOTFS_OVERLAY)), \
+		$(call MESSAGE,"Copying overlay $(d)"); \
+		rsync -a \
+			--exclude .empty --exclude .svn --exclude .git \
+			--exclude .hg --exclude=CVS --exclude '*~' \
+			$(d)/ $(TARGET_DIR)$(sep))
+
+	@$(foreach s, $(call qstrip,$(BR2_ROOTFS_POST_BUILD_SCRIPT)), \
+		$(call MESSAGE,"Executing post-build script $(s)"); \
+		$(s) $(TARGET_DIR) $(call qstrip,$(BR2_ROOTFS_POST_SCRIPT_ARGS))$(sep))
 
 ifeq ($(BR2_ENABLE_LOCALE_PURGE),y)
 LOCALE_WHITELIST=$(BUILD_DIR)/locales.nopurge
@@ -465,8 +557,8 @@ ifneq ($(GENERATE_LOCALE),)
 target-generatelocales: host-localedef
 	$(Q)mkdir -p $(TARGET_DIR)/usr/lib/locale/
 	$(Q)for locale in $(GENERATE_LOCALE) ; do \
-		inputfile=`echo $${locale} | cut -f1 -d'.'` ; \
-		charmap=`echo $${locale} | cut -f2 -d'.'` ; \
+		inputfile=`echo $${locale} | cut -f1 -d'.' -s` ; \
+		charmap=`echo $${locale} | cut -f2 -d'.' -s` ; \
 		if test -z "$${charmap}" ; then \
 			charmap="UTF-8" ; \
 		fi ; \
@@ -480,11 +572,41 @@ target-generatelocales: host-localedef
 	done
 endif
 
+target-post-image:
+	@$(foreach s, $(call qstrip,$(BR2_ROOTFS_POST_IMAGE_SCRIPT)), \
+		$(call MESSAGE,"Executing post-image script $(s)"); \
+		$(s) $(BINARIES_DIR) $(call qstrip,$(BR2_ROOTFS_POST_SCRIPT_ARGS))$(sep))
+
+toolchain-eclipse-register:
+	./support/scripts/eclipse-register-toolchain `readlink -f $(O)` $(notdir $(TARGET_CROSS)) $(BR2_ARCH)
+
 source: dirs $(TARGETS_SOURCE) $(HOST_SOURCE)
 
 external-deps:
 	@$(MAKE) -Bs DL_MODE=SHOW_EXTERNAL_DEPS $(EXTRAMAKEARGS) source | sort -u
 
+legal-info-clean:
+	@rm -fr $(LEGAL_INFO_DIR)
+
+legal-info-prepare: $(LEGAL_INFO_DIR)
+	@$(call MESSAGE,"Collecting legal info")
+	@$(call legal-license-file,buildroot,COPYING,COPYING)
+	@$(call legal-manifest,PACKAGE,VERSION,LICENSE,LICENSE FILES,SOURCE ARCHIVE)
+	@$(call legal-manifest,buildroot,$(BR2_VERSION_FULL),GPLv2+,COPYING,not saved)
+	@$(call legal-warning,the Buildroot source code has not been saved)
+	@$(call legal-warning,the toolchain has not been saved)
+	@cp $(BUILDROOT_CONFIG) $(LEGAL_INFO_DIR)/buildroot.config
+
+legal-info: dirs legal-info-clean legal-info-prepare $(REDIST_SOURCES_DIR) \
+		$(TARGETS_LEGAL_INFO)
+	@cat support/legal-info/README.header >>$(LEGAL_REPORT)
+	@if [ -r $(LEGAL_WARNINGS) ]; then \
+		cat support/legal-info/README.warnings-header \
+			$(LEGAL_WARNINGS) >>$(LEGAL_REPORT); \
+		cat $(LEGAL_WARNINGS); fi
+	@echo "Legal info produced in $(LEGAL_INFO_DIR)"
+	@rm -f $(LEGAL_WARNINGS)
+
 show-targets:
 	@echo $(TARGETS)
 
@@ -492,6 +614,8 @@ else # ifeq ($(BR2_HAVE_DOT_CONFIG),y)
 
 all: menuconfig
 
+endif # ifeq ($(BR2_HAVE_DOT_CONFIG),y)
+
 # configuration
 # ---------------------------------------------------------------------------
 
@@ -502,11 +626,16 @@ $(BUILD_DIR)/buildroot-config/%onf:
 	mkdir -p $(@D)/lxdialog
 	$(MAKE) CC="$(HOSTCC_NOCCACHE)" HOSTCC="$(HOSTCC_NOCCACHE)" obj=$(@D) -C $(CONFIG) -f Makefile.br $(@F)
 
+DEFCONFIG = $(call qstrip,$(BR2_DEFCONFIG))
+
+# We don't want to fully expand BR2_DEFCONFIG here, so Kconfig will
+# recognize that if it's still at its default $(CONFIG_DIR)/defconfig
 COMMON_CONFIG_ENV = \
+	BR2_DEFCONFIG='$(call qstrip,$(value BR2_DEFCONFIG))' \
 	KCONFIG_AUTOCONFIG=$(BUILD_DIR)/buildroot-config/auto.conf \
 	KCONFIG_AUTOHEADER=$(BUILD_DIR)/buildroot-config/autoconf.h \
 	KCONFIG_TRISTATE=$(BUILD_DIR)/buildroot-config/tristate.config \
-	BUILDROOT_CONFIG=$(CONFIG_DIR)/.config
+	BUILDROOT_CONFIG=$(BUILDROOT_CONFIG)
 
 xconfig: $(BUILD_DIR)/buildroot-config/qconf outputmakefile
 	@mkdir -p $(BUILD_DIR)/buildroot-config
@@ -546,7 +675,10 @@ allnoconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 
 randpackageconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 	@mkdir -p $(BUILD_DIR)/buildroot-config
-	@grep -v BR2_PACKAGE_ $(CONFIG_DIR)/.config > $(CONFIG_DIR)/.config.nopkg
+	@grep -v BR2_PACKAGE_ $(BUILDROOT_CONFIG) > $(CONFIG_DIR)/.config.nopkg
+	@grep '^config BR2_PACKAGE_' Config.in.legacy | \
+		while read config pkg; do \
+		echo "# $$pkg is not set" >> $(CONFIG_DIR)/.config.nopkg; done
 	@$(COMMON_CONFIG_ENV) \
 		KCONFIG_ALLCONFIG=$(CONFIG_DIR)/.config.nopkg \
 		$< --randconfig $(CONFIG_CONFIG_IN)
@@ -554,7 +686,10 @@ randpackageconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 
 allyespackageconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 	@mkdir -p $(BUILD_DIR)/buildroot-config
-	@grep -v BR2_PACKAGE_ $(CONFIG_DIR)/.config > $(CONFIG_DIR)/.config.nopkg
+	@grep -v BR2_PACKAGE_ $(BUILDROOT_CONFIG) > $(CONFIG_DIR)/.config.nopkg
+	@grep '^config BR2_PACKAGE_' Config.in.legacy | \
+		while read config pkg; do \
+		echo "# $$pkg is not set" >> $(CONFIG_DIR)/.config.nopkg; done
 	@$(COMMON_CONFIG_ENV) \
 		KCONFIG_ALLCONFIG=$(CONFIG_DIR)/.config.nopkg \
 		$< --allyesconfig $(CONFIG_CONFIG_IN)
@@ -562,7 +697,7 @@ allyespackageconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 
 allnopackageconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 	@mkdir -p $(BUILD_DIR)/buildroot-config
-	@grep -v BR2_PACKAGE_ $(CONFIG_DIR)/.config > $(CONFIG_DIR)/.config.nopkg
+	@grep -v BR2_PACKAGE_ $(BUILDROOT_CONFIG) > $(CONFIG_DIR)/.config.nopkg
 	@$(COMMON_CONFIG_ENV) \
 		KCONFIG_ALLCONFIG=$(CONFIG_DIR)/.config.nopkg \
 		$< --allnoconfig $(CONFIG_CONFIG_IN)
@@ -572,9 +707,13 @@ silentoldconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 	@mkdir -p $(BUILD_DIR)/buildroot-config
 	$(COMMON_CONFIG_ENV) $< --silentoldconfig $(CONFIG_CONFIG_IN)
 
+olddefconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
+	@mkdir -p $(BUILD_DIR)/buildroot-config
+	$(COMMON_CONFIG_ENV) $< --olddefconfig $(CONFIG_CONFIG_IN)
+
 defconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 	@mkdir -p $(BUILD_DIR)/buildroot-config
-	@$(COMMON_CONFIG_ENV) $< --defconfig$(if $(BR2_DEFCONFIG),=$(BR2_DEFCONFIG)) $(CONFIG_CONFIG_IN)
+	@$(COMMON_CONFIG_ENV) $< --defconfig$(if $(DEFCONFIG),=$(DEFCONFIG)) $(CONFIG_CONFIG_IN)
 
 %_defconfig: $(BUILD_DIR)/buildroot-config/conf $(TOPDIR)/configs/%_defconfig outputmakefile
 	@mkdir -p $(BUILD_DIR)/buildroot-config
@@ -582,19 +721,21 @@ defconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 
 savedefconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 	@mkdir -p $(BUILD_DIR)/buildroot-config
-	@$(COMMON_CONFIG_ENV) $< --savedefconfig=$(CONFIG_DIR)/defconfig $(CONFIG_CONFIG_IN)
+	@$(COMMON_CONFIG_ENV) $< \
+		--savedefconfig=$(if $(DEFCONFIG),$(DEFCONFIG),$(CONFIG_DIR)/defconfig) \
+		$(CONFIG_CONFIG_IN)
 
 # check if download URLs are outdated
-source-check: allyesconfig
+source-check:
 	$(MAKE) DL_MODE=SOURCE_CHECK $(EXTRAMAKEARGS) source
 
-endif # ifeq ($(BR2_HAVE_DOT_CONFIG),y)
+.PHONY: defconfig savedefconfig
 
-#############################################################
+################################################################################
 #
 # Cleanup and misc junk
 #
-#############################################################
+################################################################################
 
 # outputmakefile generates a Makefile in the output directory, if using a
 # separate output directory. This allows convenient use of make in the
@@ -604,9 +745,18 @@ ifeq ($(NEED_WRAPPER),y)
 	$(Q)$(TOPDIR)/support/scripts/mkmakefile $(TOPDIR) $(O)
 endif
 
+# printvars prints all the variables currently defined in our Makefiles
+printvars:
+	@$(foreach V, \
+		$(sort $(.VARIABLES)), \
+		$(if $(filter-out environment% default automatic, \
+				$(origin $V)), \
+		$(info $V=$($V) ($(value $V)))))
+
 clean:
 	rm -rf $(STAGING_DIR) $(TARGET_DIR) $(BINARIES_DIR) $(HOST_DIR) \
-		$(STAMP_DIR) $(BUILD_DIR) $(TOOLCHAIN_DIR) $(BASE_DIR)/staging
+		$(STAMP_DIR) $(BUILD_DIR) $(BASE_DIR)/staging \
+		$(LEGAL_INFO_DIR)
 
 distclean: clean
 ifeq ($(DL_DIR),$(TOPDIR)/dl)
@@ -615,9 +765,7 @@ endif
 ifeq ($(O),output)
 	rm -rf $(O)
 endif
-	rm -rf $(CONFIG_DIR)/.config $(CONFIG_DIR)/.config.old $(CONFIG_DIR)/.auto.deps
-
-cross: $(BASE_TARGETS)
+	rm -rf $(BUILDROOT_CONFIG) $(CONFIG_DIR)/.config.old $(CONFIG_DIR)/.auto.deps
 
 help:
 	@echo 'Cleaning:'
@@ -626,6 +774,7 @@ help:
 	@echo
 	@echo 'Build:'
 	@echo '  all                    - make world'
+	@echo '  toolchain              - build toolchain'
 	@echo '  <package>-rebuild      - force recompile <package>'
 	@echo '  <package>-reconfigure  - force reconfigure <package>'
 	@echo
@@ -635,6 +784,8 @@ help:
 	@echo '  xconfig                - interactive Qt-based configurator'
 	@echo '  gconfig                - interactive GTK-based configurator'
 	@echo '  oldconfig              - resolve any unresolved symbols in .config'
+	@echo '  silentoldconfig        - Same as oldconfig, but quietly, additionally update deps'
+	@echo '  olddefconfig           - Same as silentoldconfig but sets new symbols to their default value'
 	@echo '  randconfig             - New config with random answer to all options'
 	@echo '  defconfig              - New config with default answer to all options'
 	@echo '                             BR2_DEFCONFIG, if set, is used as input'
@@ -672,8 +823,9 @@ endif
 	@echo
 	@echo 'Miscellaneous:'
 	@echo '  source                 - download all sources needed for offline-build'
-	@echo '  source-check           - check all packages for valid download URLs'
+	@echo '  source-check           - check selected packages for valid download URLs'
 	@echo '  external-deps          - list external packages used'
+	@echo '  legal-info             - generate info about license compliance'
 	@echo
 	@echo '  make V=0|1             - 0 => quiet build (default), 1 => verbose build'
 	@echo '  make O=dir             - Locate all output files in "dir", including .config'
@@ -702,4 +854,3 @@ print-version:
 include docs/manual/manual.mk
 
 .PHONY: $(noconfig_targets)
-

Makefile.legacy

@@ -0,0 +1,30 @@
+#
+# Makefile.legacy - support for backward compatibility
+#
+# This file contains placeholders to detect backward-compatibility problems.
+# When a buildroot "API" feature is being deprecated, a rule should be added
+# here that issues an error when the old feature is used.
+#
+# This file is not included if BR2_DEPRECATED is selected, so it is possible
+# to bypass the errors (although that's usually a bad idea).
+
+ifeq ($(BR2_LEGACY),y)
+$(error "You have legacy configuration in your .config! Please check your configuration.")
+endif
+
+#
+# Legacy options from 2012.08
+#
+
+host-pkg-config:
+	@$(call MESSAGE,host-pkg-config is replaced by host-pkgconf)
+	@$(call MESSAGE,please update your .mk files)
+	@false
+.PHONY: host-pkg-config
+
+#
+# Legacy options from 2012.05
+#
+GENTARGETS = $$(error The GENTARGETS macro no longer exists; use $$$$(eval $$$$(generic-package)) or $$$$(eval $$$$(host-generic-package)))
+AUTOTARGETS = $$(error The AUTOTARGETS macro no longer exists; use $$$$(eval $$$$(autotools-package)) or $$$$(eval $$$$(host-autotools-package)))
+CMAKETARGETS = $$(error The CMAKETARGETS macro no longer exists; use $$$$(eval $$$$(cmake-package)) or $$$$(eval $$$$(host-cmake-package)))

arch/Config.in

@@ -0,0 +1,326 @@
+config BR2_ARCH_IS_64
+	bool
+
+config BR2_SOFT_FLOAT
+	bool
+
+choice
+	prompt "Target Architecture"
+	default BR2_i386
+	help
+	  Select the target architecture family to build for.
+
+config BR2_arcle
+	bool "ARC (little endian)"
+	help
+	  Synopsys' DesignWare ARC Processor Cores are a family of 32-bit CPUs
+	  that can be used from deeply embedded to high performance host
+	  applications. Little endian.
+
+config BR2_arceb
+	bool "ARC (big endian)"
+	help
+	  Synopsys' DesignWare ARC Processor Cores are a family of 32-bit CPUs
+	  that can be used from deeply embedded to high performance host
+	  applications. Big endian.
+
+config BR2_arm
+	bool "ARM (little endian)"
+	help
+	  ARM is a 32-bit reduced instruction set computer (RISC) instruction
+	  set architecture (ISA) developed by ARM Holdings. Little endian.
+	  http://www.arm.com/
+	  http://en.wikipedia.org/wiki/ARM
+
+config BR2_armeb
+	bool "ARM (big endian)"
+	help
+	  ARM is a 32-bit reduced instruction set computer (RISC) instruction
+	  set architecture (ISA) developed by ARM Holdings. Big endian.
+	  http://www.arm.com/
+	  http://en.wikipedia.org/wiki/ARM
+
+config BR2_aarch64
+	bool "AArch64"
+	select BR2_ARCH_IS_64
+	help
+	  Aarch64 is a 64-bit architecture developed by ARM Holdings.
+	  http://www.arm.com/products/processors/instruction-set-architectures/armv8-architecture.php
+	  http://en.wikipedia.org/wiki/ARM
+
+config BR2_avr32
+	bool "AVR32"
+	select BR2_SOFT_FLOAT
+	help
+	  The AVR32 is a 32-bit RISC microprocessor architecture designed by
+	  Atmel.
+	  http://www.atmel.com/
+	  http://en.wikipedia.org/wiki/Avr32
+
+config BR2_bfin
+	bool "Blackfin"
+	help
+	  The Blackfin is a family of 16 or 32-bit microprocessors developed,
+	  manufactured and marketed by Analog Devices.
+	  http://www.analog.com/
+	  http://en.wikipedia.org/wiki/Blackfin
+
+config BR2_i386
+	bool "i386"
+	help
+	  Intel i386 architecture compatible microprocessor
+	  http://en.wikipedia.org/wiki/I386
+
+config BR2_m68k
+	bool "m68k"
+	depends on BROKEN # ice in uclibc / inet_ntoa_r
+	help
+	  Motorola 68000 family microprocessor
+	  http://en.wikipedia.org/wiki/M68k
+
+config BR2_microblazeel
+	bool "Microblaze AXI (little endian)"
+	help
+	  Soft processor core designed for Xilinx FPGAs from Xilinx. AXI bus
+	  based architecture (little endian)
+	  http://www.xilinx.com
+	  http://en.wikipedia.org/wiki/Microblaze
+
+config BR2_microblazebe
+	bool "Microblaze non-AXI (big endian)"
+	help
+	  Soft processor core designed for Xilinx FPGAs from Xilinx. PLB bus
+	  based architecture (non-AXI, big endian)
+	  http://www.xilinx.com
+	  http://en.wikipedia.org/wiki/Microblaze
+
+config BR2_mips
+	bool "MIPS (big endian)"
+	help
+	  MIPS is a RISC microprocessor from MIPS Technologies. Big endian.
+	  http://www.mips.com/
+	  http://en.wikipedia.org/wiki/MIPS_Technologies
+
+config BR2_mipsel
+	bool "MIPS (little endian)"
+	help
+	  MIPS is a RISC microprocessor from MIPS Technologies. Little endian.
+	  http://www.mips.com/
+	  http://en.wikipedia.org/wiki/MIPS_Technologies
+
+config BR2_mips64
+	bool "MIPS64 (big endian)"
+	select BR2_ARCH_IS_64
+	help
+	  MIPS is a RISC microprocessor from MIPS Technologies. Big endian.
+	  http://www.mips.com/
+	  http://en.wikipedia.org/wiki/MIPS_Technologies
+
+config BR2_mips64el
+	bool "MIPS64 (little endian)"
+	select BR2_ARCH_IS_64
+	help
+	  MIPS is a RISC microprocessor from MIPS Technologies. Little endian.
+	  http://www.mips.com/
+	  http://en.wikipedia.org/wiki/MIPS_Technologies
+
+config BR2_powerpc
+	bool "PowerPC"
+	help
+	  PowerPC is a RISC architecture created by Apple-IBM-Motorola alliance.
+	  http://www.power.org/
+	  http://en.wikipedia.org/wiki/Powerpc
+
+config BR2_sh
+	bool "SuperH"
+	help
+	  SuperH (or SH) is a 32-bit reduced instruction set computer (RISC)
+	  instruction set architecture (ISA) developed by Hitachi.
+	  http://www.hitachi.com/
+	  http://en.wikipedia.org/wiki/SuperH
+
+config BR2_sh64
+	bool "SuperH64"
+	help
+	  SuperH64 (or SH) is a 64-bit reduced instruction set computer (RISC)
+	  instruction set architecture (ISA) developed by Hitachi.
+	  http://www.hitachi.com/
+	  http://en.wikipedia.org/wiki/SuperH
+
+config BR2_sparc
+	bool "SPARC"
+	help
+	  SPARC (from Scalable Processor Architecture) is a RISC instruction
+	  set architecture (ISA) developed by Sun Microsystems.
+	  http://www.oracle.com/sun
+	  http://en.wikipedia.org/wiki/Sparc
+
+config BR2_x86_64
+	bool "x86_64"
+	select BR2_ARCH_IS_64
+	help
+	  x86-64 is an extension of the x86 instruction set (Intel i386
+	  architecture compatible microprocessor).
+	  http://en.wikipedia.org/wiki/X86_64
+
+config BR2_xtensa
+	bool "Xtensa"
+	help
+	  Xtensa is a Tensilica processor IP architecture.
+	  http://en.wikipedia.org/wiki/Xtensa
+	  http://www.tensilica.com/
+
+endchoice
+
+# The following string values are defined by the individual
+# Config.in.$ARCH files
+config BR2_ARCH
+	string
+
+config BR2_ENDIAN
+	string
+
+config BR2_GCC_TARGET_TUNE
+	string
+
+config BR2_GCC_TARGET_ARCH
+	string
+
+config BR2_GCC_TARGET_ABI
+	string
+
+config BR2_GCC_TARGET_CPU
+	string
+
+config BR2_GCC_TARGET_CPU_REVISION
+	string
+
+# The value of this option will be passed as --with-fpu=<value> when
+# building gcc (internal backend) or -mfpu=<value> in the toolchain
+# wrapper (external toolchain)
+config BR2_GCC_TARGET_FPU
+	string
+
+# The value of this option will be passed as --with-float=<value> when
+# building gcc (internal backend) or -mfloat-abi=<value> in the toolchain
+# wrapper (external toolchain)
+config BR2_GCC_TARGET_FLOAT_ABI
+	string
+
+# The value of this option will be passed as --with-mode=<value> when
+# building gcc (internal backend) or -m<value> in the toolchain
+# wrapper (external toolchain)
+config BR2_GCC_TARGET_MODE
+	string
+
+# Set up target binary format
+choice
+	prompt "Target Binary Format"
+	depends on BR2_bfin || BR2_m68k
+	default BR2_BINFMT_FDPIC
+
+config BR2_BINFMT_ELF
+	bool "ELF"
+	depends on !BR2_bfin && !BR2_m68k
+	help
+	  ELF (Executable and Linkable Format) is a format for libraries and
+	  executables used across different architectures and operating
+	  systems.
+
+config BR2_BINFMT_FDPIC
+	bool "FDPIC"
+	depends on BR2_bfin || BR2_m68k
+	help
+	  ELF FDPIC binaries are based on ELF, but allow the individual load
+	  segments of a binary to be located in memory independently of each
+	  other. This makes this format ideal for use in environments where no
+	  MMU is available.
+
+config BR2_BINFMT_FLAT
+	bool "FLAT"
+	depends on BR2_bfin || BR2_m68k
+	select BR2_PREFER_STATIC_LIB
+	help
+	  FLAT binary is a relatively simple and lightweight executable format
+	  based on the original a.out format. It is widely used in environment
+	  where no MMU is available.
+
+endchoice
+
+# Set up flat binary type
+choice
+	prompt "FLAT Binary type"
+	depends on BR2_BINFMT_FLAT
+	default BR2_BINFMT_FLAT_ONE
+
+config BR2_BINFMT_FLAT_ONE
+	bool "One memory region"
+	help
+	  All segments are linked into one memory region.
+
+config BR2_BINFMT_FLAT_SEP_DATA
+	bool "Separate data and code region"
+	depends on BR2_bfin || BR2_m68k
+	help
+	  Allow for the data and text segments to be separated and placed in
+	  different regions of memory.
+
+config BR2_BINFMT_FLAT_SHARED
+	bool "Shared binary"
+	depends on BR2_bfin || BR2_m68k
+	help
+	  Allow to load and link indiviual FLAT binaries at run time.
+
+endchoice
+
+if BR2_arcle || BR2_arceb
+source "arch/Config.in.arc"
+endif
+
+if BR2_arm || BR2_armeb
+source "arch/Config.in.arm"
+endif
+
+if BR2_aarch64
+source "arch/Config.in.aarch64"
+endif
+
+if BR2_avr32
+source "arch/Config.in.avr32"
+endif
+
+if BR2_bfin
+source "arch/Config.in.bfin"
+endif
+
+if BR2_m68k
+source "arch/Config.in.m68k"
+endif
+
+if BR2_microblazeel || BR2_microblazebe
+source "arch/Config.in.microblaze"
+endif
+
+if BR2_mips || BR2_mips64 || BR2_mipsel || BR2_mips64el
+source "arch/Config.in.mips"
+endif
+
+if BR2_powerpc
+source "arch/Config.in.powerpc"
+endif
+
+if BR2_sh || BR2_sh64
+source "arch/Config.in.sh"
+endif
+
+if BR2_sparc
+source "arch/Config.in.sparc"
+endif
+
+if BR2_i386 || BR2_x86_64
+source "arch/Config.in.x86"
+endif
+
+if BR2_xtensa
+source "arch/Config.in.xtensa"
+endif

arch/Config.in.aarch64

@@ -0,0 +1,5 @@
+config BR2_ARCH
+	default "aarch64"	if BR2_aarch64
+
+config BR2_ENDIAN
+	default "LITTLE"

arch/Config.in.arc

@@ -0,0 +1,18 @@
+config BR2_ARCH
+	default "arc"	if BR2_arcle
+	default "arceb"	if BR2_arceb
+
+config BR2_arc
+	bool
+	default y if BR2_arcle || BR2_arceb
+
+config BR2_ENDIAN
+	default "LITTLE" if BR2_arcle
+	default "BIG"	 if BR2_arceb
+
+config BR2_GCC_TARGET_CPU
+	default "arc700"
+
+config BR2_ARC_SITE
+	string
+	default "http://www.synopsys.com/apps/arc-developer/"

arch/Config.in.arm

@@ -0,0 +1,408 @@
+# arm cpu features
+config BR2_ARM_CPU_HAS_NEON
+	bool
+
+# for some cores, NEON support is optional
+config BR2_ARM_CPU_MAYBE_HAS_NEON
+	bool
+
+# for some cores, VFPv2 is optional
+config BR2_ARM_CPU_MAYBE_HAS_VFPV2
+	bool
+
+config BR2_ARM_CPU_HAS_VFPV2
+	bool
+
+# for some cores, VFPv3 is optional
+config BR2_ARM_CPU_MAYBE_HAS_VFPV3
+	bool
+	select BR2_ARM_CPU_MAYBE_HAS_VFPV2
+
+config BR2_ARM_CPU_HAS_VFPV3
+	bool
+	select BR2_ARM_CPU_HAS_VFPV2
+
+# for some cores, VFPv4 is optional
+config BR2_ARM_CPU_MAYBE_HAS_VFPV4
+	bool
+	select BR2_ARM_CPU_MAYBE_HAS_VFPV3
+
+config BR2_ARM_CPU_HAS_VFPV4
+	bool
+	select BR2_ARM_CPU_HAS_VFPV3
+
+config BR2_ARM_CPU_HAS_THUMB
+	bool
+
+config BR2_ARM_CPU_HAS_THUMB2
+	bool
+
+choice
+	prompt "Target Architecture Variant"
+	depends on BR2_arm || BR2_armeb
+	default BR2_arm926t
+	help
+	  Specific CPU variant to use
+
+config BR2_arm7tdmi
+	bool "arm7tdmi"
+	select BR2_ARM_CPU_HAS_THUMB
+config BR2_arm720t
+	bool "arm720t"
+	select BR2_ARM_CPU_HAS_THUMB
+config BR2_arm920t
+	bool "arm920t"
+	select BR2_ARM_CPU_HAS_THUMB
+config BR2_arm922t
+	bool "arm922t"
+	select BR2_ARM_CPU_HAS_THUMB
+config BR2_arm926t
+	bool "arm926t"
+	select BR2_ARM_CPU_MAYBE_HAS_VFPV2
+	select BR2_ARM_CPU_HAS_THUMB
+config BR2_arm10t
+	bool "arm10t"
+	select BR2_ARM_CPU_HAS_THUMB
+config BR2_arm1136jf_s_r0
+	bool "arm1136jf_s rev0"
+	select BR2_ARM_CPU_HAS_VFPV2
+	select BR2_ARM_CPU_HAS_THUMB
+config BR2_arm1136jf_s_r1
+	bool "arm1136jf_s rev1"
+	select BR2_ARM_CPU_HAS_VFPV2
+	select BR2_ARM_CPU_HAS_THUMB
+config BR2_arm1176jz_s
+	bool "arm1176jz-s"
+	select BR2_ARM_CPU_HAS_THUMB
+config BR2_arm1176jzf_s
+	bool "arm1176jzf-s"
+	select BR2_ARM_CPU_HAS_VFPV2
+	select BR2_ARM_CPU_HAS_THUMB
+config BR2_cortex_a5
+	bool "cortex-A5"
+	select BR2_ARM_CPU_MAYBE_HAS_NEON
+	select BR2_ARM_CPU_MAYBE_HAS_VFPV4
+	select BR2_ARM_CPU_HAS_THUMB2
+config BR2_cortex_a7
+	bool "cortex-A7"
+	select BR2_ARM_CPU_HAS_NEON
+	select BR2_ARM_CPU_HAS_VFPV4
+	select BR2_ARM_CPU_HAS_THUMB2
+config BR2_cortex_a8
+	bool "cortex-A8"
+	select BR2_ARM_CPU_HAS_NEON
+	select BR2_ARM_CPU_HAS_VFPV3
+	select BR2_ARM_CPU_HAS_THUMB2
+config BR2_cortex_a9
+	bool "cortex-A9"
+	select BR2_ARM_CPU_MAYBE_HAS_NEON
+	select BR2_ARM_CPU_MAYBE_HAS_VFPV3
+	select BR2_ARM_CPU_HAS_THUMB2
+config BR2_cortex_a15
+	bool "cortex-A15"
+	select BR2_ARM_CPU_HAS_NEON
+	select BR2_ARM_CPU_HAS_VFPV4
+	select BR2_ARM_CPU_HAS_THUMB2
+config BR2_fa526
+	bool "fa526/626"
+config BR2_pj4
+	bool "pj4"
+	select BR2_ARM_CPU_HAS_VFPV3
+config BR2_strongarm
+	bool "strongarm sa110/sa1100"
+config BR2_xscale
+	bool "xscale"
+	select BR2_ARM_CPU_HAS_THUMB
+config BR2_iwmmxt
+	bool "iwmmxt"
+endchoice
+
+config BR2_arm1136jf_s
+	bool
+	default BR2_arm1136jf_s_r0 || BR2_arm1136jf_s_r1
+
+choice
+	prompt "Target ABI"
+	depends on BR2_arm || BR2_armeb
+	default BR2_ARM_EABI
+	help
+	  Application Binary Interface to use. The Application Binary
+	  Interface describes the calling conventions (how arguments
+	  are passed to functions, how the return value is passed, how
+	  system calls are made, etc.).
+
+config BR2_ARM_EABI
+	bool "EABI"
+	help
+	  The EABI is currently the standard ARM ABI, which is used in
+	  most projects. It supports both the 'soft' floating point
+	  model (in which floating point instructions are emulated in
+	  software) and the 'softfp' floating point model (in which
+	  floating point instructions are executed using an hardware
+	  floating point unit, but floating point arguments to
+	  functions are passed in integer registers).
+
+	  The 'softfp' floating point model is link-compatible with
+	  the 'soft' floating point model, i.e you can link a library
+	  built 'soft' with some other code built 'softfp'.
+
+	  However, passing the floating point arguments in integer
+	  registers is a bit inefficient, so if your ARM processor has
+	  a floating point unit, and you don't have pre-compiled
+	  'soft' or 'softfp' code, using the EABIhf ABI will provide
+	  better floating point performances.
+
+	  If your processor does not have a floating point unit, then
+	  you must use this ABI.
+
+config BR2_ARM_EABIHF
+	bool "EABIhf"
+	depends on BR2_ARM_CPU_MAYBE_HAS_VFPV2 || BR2_ARM_CPU_HAS_VFPV2
+	help
+	  The EABIhf is an extension of EABI which supports the 'hard'
+	  floating point model. This model uses the floating point
+	  unit to execute floating point instructions, and passes
+	  floating point arguments in floating point registers.
+
+	  It is more efficient than EABI for floating point related
+	  workload. However, it does not allow to link against code
+	  that has been pre-built for the 'soft' or 'softfp' floating
+	  point models.
+
+	  If your processor has a floating point unit, and you don't
+	  depend on existing pre-compiled code, this option is most
+	  likely the best choice.
+
+endchoice
+
+config BR2_ARM_ENABLE_NEON
+	bool "Enable NEON SIMD extension support"
+	depends on BR2_ARM_CPU_MAYBE_HAS_NEON
+	select BR2_ARM_CPU_HAS_NEON
+	help
+	  For some CPU cores, the NEON SIMD extension is optional.
+	  Select this option if you are certain your particular
+	  implementation has NEON support and you want to use it.
+
+choice
+	prompt "Floating point strategy"
+	depends on BR2_ARM_EABI || BR2_ARM_EABIHF
+	default BR2_ARM_FPU_VFPV4D16 if BR2_ARM_CPU_HAS_VFPV4
+	default BR2_ARM_FPU_VFPV3D16 if BR2_ARM_CPU_HAS_VFPV3
+	default BR2_ARM_FPU_VFPV2 if BR2_ARM_CPU_HAS_VFPV2
+	default BR2_ARM_SOFT_FLOAT if !BR2_ARM_CPU_HAS_VFPV2
+
+config BR2_ARM_SOFT_FLOAT
+	bool "Soft float"
+	depends on BR2_ARM_EABI
+	select BR2_SOFT_FLOAT
+	help
+	  This option allows to use software emulated floating
+	  point. It should be used for ARM cores that do not include a
+	  Vector Floating Point unit, such as ARMv5 cores (ARM926 for
+	  example) or certain ARMv6 cores.
+
+config BR2_ARM_FPU_VFPV2
+	bool "VFPv2"
+	depends on BR2_ARM_CPU_HAS_VFPV2 || BR2_ARM_CPU_MAYBE_HAS_VFPV2
+	help
+	  This option allows to use the VFPv2 floating point unit, as
+	  available in some ARMv5 processors (ARM926EJ-S) and some
+	  ARMv6 processors (ARM1136JF-S, ARM1176JZF-S and ARM11
+	  MPCore).
+
+	  Note that this option is also safe to use for newer cores
+	  such as Cortex-A, because the VFPv3 and VFPv4 units are
+	  backward compatible with VFPv2.
+
+config BR2_ARM_FPU_VFPV3
+	bool "VFPv3"
+	depends on BR2_ARM_CPU_HAS_VFPV3 || BR2_ARM_CPU_MAYBE_HAS_VFPV3
+	help
+	  This option allows to use the VFPv3 floating point unit, as
+	  available in some ARMv7 processors (Cortex-A{8, 9}). This
+	  option requires a VFPv3 unit that has 32 double-precision
+	  registers, which is not necessarily the case in all SOCs
+	  based on Cortex-A{8, 9}. If you're unsure, use VFPv3-D16
+	  instead, which is guaranteed to work on all Cortex-A{8, 9}.
+
+	  Note that this option is also safe to use for newer cores
+	  that have a VFPv4 unit, because VFPv4 is backward compatible
+	  with VFPv3. They must of course also have 32
+	  double-precision registers.
+
+config BR2_ARM_FPU_VFPV3D16
+	bool "VFPv3-D16"
+	depends on BR2_ARM_CPU_HAS_VFPV3 || BR2_ARM_CPU_MAYBE_HAS_VFPV3
+	help
+	  This option allows to use the VFPv3 floating point unit, as
+	  available in some ARMv7 processors (Cortex-A{8, 9}). This
+	  option requires a VFPv3 unit that has 16 double-precision
+	  registers, which is generally the case in all SOCs based on
+	  Cortex-A{8, 9}, even though VFPv3 is technically optional on
+	  Cortex-A9. This is the safest option for those cores.
+
+	  Note that this option is also safe to use for newer cores
+	  such that have a VFPv4 unit, because the VFPv4 is backward
+	  compatible with VFPv3.
+
+config BR2_ARM_FPU_VFPV4
+	bool "VFPv4"
+	depends on BR2_ARM_CPU_HAS_VFPV4 || BR2_ARM_CPU_MAYBE_HAS_VFPV4
+	help
+	  This option allows to use the VFPv4 floating point unit, as
+	  available in some ARMv7 processors (Cortex-A{5, 7, 12,
+	  15}). This option requires a VFPv4 unit that has 32
+	  double-precision registers, which is not necessarily the
+	  case in all SOCs based on Cortex-A{5, 7, 12, 15}. If you're
+	  unsure, you should probably use VFPv4-D16 instead.
+
+	  Note that if you want binary code that works on all ARMv7
+	  cores, including the earlier Cortex-A{8, 9}, you should
+	  instead select VFPv3.
+
+config BR2_ARM_FPU_VFPV4D16
+	bool "VFPv4-D16"
+	depends on BR2_ARM_CPU_HAS_VFPV4 || BR2_ARM_CPU_MAYBE_HAS_VFPV4
+	help
+	  This option allows to use the VFPv4 floating point unit, as
+	  available in some ARMv7 processors (Cortex-A{5, 7, 12,
+	  15}). This option requires a VFPv4 unit that has 16
+	  double-precision registers, which is always available on
+	  Cortex-A12 and Cortex-A15, but optional on Cortex-A5 and
+	  Cortex-A7.
+
+	  Note that if you want binary code that works on all ARMv7
+	  cores, including the earlier Cortex-A{8, 9}, you should
+	  instead select VFPv3-D16.
+
+config BR2_ARM_FPU_NEON
+	bool "NEON"
+	depends on BR2_ARM_CPU_HAS_NEON
+	help
+	  This option allows to use the NEON SIMD unit, as available
+	  in some ARMv7 processors, as a floating-point unit. It
+	  should however be noted that using NEON for floating point
+	  operations doesn't provide a complete compatibility with the
+	  IEEE 754.
+
+config BR2_ARM_FPU_NEON_VFPV4
+	bool "NEON/VFPv4"
+	depends on BR2_ARM_CPU_HAS_VFPV4 || BR2_ARM_CPU_MAYBE_HAS_VFPV4
+	depends on BR2_ARM_CPU_HAS_NEON
+	help
+	  This option allows to use both the VFPv4 and the NEON SIMD
+	  units for floating point operations. Note that some ARMv7
+	  cores do not necessarily have VFPv4 and/or NEON support, for
+	  example on Cortex-A5 and Cortex-A7, support for VFPv4 and
+	  NEON is optional.
+
+endchoice
+
+choice
+	prompt "ARM instruction set"
+	depends on BR2_ARM_CPU_HAS_THUMB || BR2_ARM_CPU_HAS_THUMB2
+
+config BR2_ARM_INSTRUCTIONS_ARM_CHOICE
+	bool "ARM"
+	help
+	  This option instructs the compiler to generate regular ARM
+	  instructions, that are all 32 bits wide.
+
+config BR2_ARM_INSTRUCTIONS_THUMB
+	bool "Thumb"
+	depends on BR2_ARM_CPU_HAS_THUMB
+	help
+	  This option instructions the compiler to generate Thumb
+	  instructions, which allows to mix 16 bits instructions and
+	  32 bits instructions. This generally provides a much smaller
+	  compiled binary size.
+
+config BR2_ARM_INSTRUCTIONS_THUMB2
+	bool "Thumb2"
+	depends on BR2_ARM_CPU_HAS_THUMB2
+	help
+	  This option instructions the compiler to generate Thumb2
+	  instructions, which allows to mix 16 bits instructions and
+	  32 bits instructions. This generally provides a much smaller
+	  compiled binary size.
+
+endchoice
+
+config BR2_ARM_INSTRUCTIONS_ARM
+	def_bool y
+	depends on !(BR2_ARM_INSTRUCTIONS_THUMB || BR2_ARM_INSTRUCTIONS_THUMB2)
+
+config BR2_ARCH
+	default "arm"	if BR2_arm
+	default "armeb"	if BR2_armeb
+
+config BR2_ENDIAN
+	default "LITTLE" if BR2_arm
+	default "BIG"	 if BR2_armeb
+
+config BR2_GCC_TARGET_TUNE
+	default "arm7tdmi"	if BR2_arm7tdmi
+	default "arm7tdmi"	if BR2_arm720t
+	default "arm7tdmi"	if BR2_arm740t
+	default "arm920"	if BR2_arm920
+	default "arm920t"	if BR2_arm920t
+	default "arm922t"	if BR2_arm922t
+	default "arm926ej-s"	if BR2_arm926t
+	default "arm1136j-s"	if BR2_arm1136j_s
+	default "arm1136jf-s"	if BR2_arm1136jf_s
+	default "arm1176jz-s"	if BR2_arm1176jz_s
+	default "arm1176jzf-s"	if BR2_arm1176jzf_s
+	default "cortex-a5"	if BR2_cortex_a5
+	default "cortex-a7"	if BR2_cortex_a7
+	default "cortex-a8"	if BR2_cortex_a8
+	default "cortex-a9"	if BR2_cortex_a9
+	default "cortex-a15"	if BR2_cortex_a15
+	default "fa526"		if BR2_fa526
+	default "marvell-pj4"	if BR2_pj4
+	default "strongarm"	if BR2_strongarm
+	default "xscale"	if BR2_xscale
+	default "iwmmxt"	if BR2_iwmmxt
+
+config BR2_GCC_TARGET_ARCH
+	default "armv4t"	if BR2_arm7tdmi
+	default "armv4t"	if BR2_arm720t
+	default "armv4t"	if BR2_arm920t
+	default "armv4t"	if BR2_arm922t
+	default "armv5te"	if BR2_arm926t
+	default "armv5t"	if BR2_arm10t
+	default "armv6j"	if BR2_arm1136jf_s_r0
+	default "armv6k"	if BR2_arm1136jf_s_r1
+	default "armv6zk"	if BR2_arm1176jz_s
+	default "armv6zk"	if BR2_arm1176jzf_s
+	default "armv7-a"	if BR2_cortex_a5
+	default "armv7-a"	if BR2_cortex_a7
+	default "armv7-a"	if BR2_cortex_a8
+	default "armv7-a"	if BR2_cortex_a9
+	default "armv7-a"	if BR2_cortex_a15
+	default "armv4"		if BR2_fa526
+	default "armv7-a"	if BR2_pj4
+	default "armv4"		if BR2_strongarm
+	default "armv5te"	if BR2_xscale
+	default "iwmmxt"	if BR2_iwmmxt
+
+config BR2_GCC_TARGET_ABI
+	default "aapcs-linux"
+
+config BR2_GCC_TARGET_FPU
+	default "vfp"		if BR2_ARM_FPU_VFPV2
+	default "vfpv3"		if BR2_ARM_FPU_VFPV3
+	default "vfpv3-d16" 	if BR2_ARM_FPU_VFPV3D16
+	default "vfpv4" 	if BR2_ARM_FPU_VFPV4
+	default "vfpv4-d16" 	if BR2_ARM_FPU_VFPV4D16
+	default "neon" 		if BR2_ARM_FPU_NEON
+	default "neon-vfpv4" 	if BR2_ARM_FPU_NEON_VFPV4
+
+config BR2_GCC_TARGET_FLOAT_ABI
+	default "soft"		if BR2_ARM_SOFT_FLOAT
+	default "softfp"	if !BR2_ARM_SOFT_FLOAT && BR2_ARM_EABI
+	default "hard"		if !BR2_ARM_SOFT_FLOAT && BR2_ARM_EABIHF
+
+config BR2_GCC_TARGET_MODE
+	default "arm"		if BR2_ARM_INSTRUCTIONS_ARM
+	default "thumb"		if BR2_ARM_INSTRUCTIONS_THUMB || BR2_ARM_INSTRUCTIONS_THUMB2

arch/Config.in.avr32

@@ -0,0 +1,5 @@
+config BR2_ARCH
+	default "avr32"
+
+config BR2_ENDIAN
+	default "BIG"

arch/Config.in.bfin

@@ -0,0 +1,107 @@
+choice
+	prompt "Target CPU"
+	depends on BR2_bfin
+	default BR2_bf609
+	help
+	  Specify target CPU
+config BR2_bf606
+	bool "bf606"
+config BR2_bf607
+	bool "bf607"
+config BR2_bf608
+	bool "bf608"
+config BR2_bf609
+	bool "bf609"
+config BR2_bf512
+	bool "bf512"
+config BR2_bf514
+	bool "bf514"
+config BR2_bf516
+	bool "bf516"
+config BR2_bf518
+	bool "bf518"
+config BR2_bf522
+	bool "bf522"
+config BR2_bf523
+	bool "bf523"
+config BR2_bf524
+	bool "bf524"
+config BR2_bf525
+	bool "bf525"
+config BR2_bf526
+	bool "bf526"
+config BR2_bf527
+	bool "bf527"
+config BR2_bf531
+	bool "bf531"
+config BR2_bf532
+	bool "bf532"
+config BR2_bf533
+	bool "bf533"
+config BR2_bf534
+	bool "bf534"
+config BR2_bf536
+	bool "bf536"
+config BR2_bf537
+	bool "bf537"
+config BR2_bf538
+	bool "bf538"
+config BR2_bf539
+	bool "bf539"
+config BR2_bf542
+	bool "bf542"
+config BR2_bf544
+	bool "bf544"
+config BR2_bf547
+	bool "bf547"
+config BR2_bf548
+	bool "bf548"
+config BR2_bf549
+	bool "bf549"
+config BR2_bf561
+	bool "bf561"
+endchoice
+
+config BR2_ARCH
+	default "bfin"
+
+config BR2_ENDIAN
+	default "LITTLE"
+
+config BR2_GCC_TARGET_CPU
+	default bf606		if BR2_bf606
+	default bf607		if BR2_bf607
+	default bf608		if BR2_bf608
+	default bf609		if BR2_bf609
+	default bf512		if BR2_bf512
+	default bf514		if BR2_bf514
+	default bf516		if BR2_bf516
+	default bf518		if BR2_bf518
+	default bf522		if BR2_bf522
+	default bf523		if BR2_bf523
+	default bf524		if BR2_bf524
+	default bf525		if BR2_bf525
+	default bf526		if BR2_bf526
+	default bf527		if BR2_bf527
+	default bf531		if BR2_bf531
+	default bf532		if BR2_bf532
+	default bf533		if BR2_bf533
+	default bf534		if BR2_bf534
+	default bf536		if BR2_bf536
+	default bf537		if BR2_bf537
+	default bf538		if BR2_bf538
+	default bf539		if BR2_bf539
+	default bf542		if BR2_bf542
+	default bf544		if BR2_bf544
+	default bf547		if BR2_bf547
+	default bf548		if BR2_bf548
+	default bf549		if BR2_bf549
+	default bf561		if BR2_bf561
+
+config BR2_GCC_TARGET_CPU_REVISION
+	string "Target CPU revision"
+	help
+	  Specify a target CPU revision, which will be appended to the
+	  value of the -mcpu option. For example, if the selected CPU is
+	  bf609, and then selected CPU revision is "0.0", then gcc will
+	  receive the -mcpu=bf609-0.0 option.

arch/Config.in.m68k

@@ -0,0 +1,21 @@
+config BR2_ARCH
+	default "m68k"		if BR2_m68k
+
+config BR2_ENDIAN
+	default "BIG"
+
+config BR2_GCC_TARGET_TUNE
+	default "68000"		if BR2_m68k_68000
+	default "68010"		if BR2_m68k_68010
+	default "68020"		if BR2_m68k_68020
+	default "68030"		if BR2_m68k_68030
+	default "68040"		if BR2_m68k_68040
+	default "68060"		if BR2_m68k_68060
+
+config BR2_GCC_TARGET_ARCH
+	default "68000"		if BR2_m68k_68000
+	default "68010"		if BR2_m68k_68010
+	default "68020"		if BR2_m68k_68020
+	default "68030"		if BR2_m68k_68030
+	default "68040"		if BR2_m68k_68040
+	default "68060"		if BR2_m68k_68060

arch/Config.in.microblaze

@@ -0,0 +1,10 @@
+config BR2_ARCH
+	default "microblaze"
+
+config BR2_ENDIAN
+	default "LITTLE" if BR2_microblazeel
+	default "BIG"	 if BR2_microblazebe
+
+config BR2_microblaze
+	bool
+	default y if BR2_microblazeel || BR2_microblazebe

arch/Config.in.mips

@@ -0,0 +1,88 @@
+choice
+	prompt "Target Architecture Variant"
+	depends on BR2_mips || BR2_mipsel || BR2_mips64 || BR2_mips64el
+	default BR2_mips_3 if BR2_mips
+	default BR2_mips_1 if BR2_mipsel
+	default BR2_mips_64 if BR2_mips64 || BR2_mips64el
+	help
+	  Specific CPU variant to use
+
+	  64bit cabable: 3, 4, 64, 64r2
+	  non-64bit capable: 1, 2, 32, 32r2
+
+config BR2_mips_1
+	bool "mips I (generic)"
+	depends on !BR2_ARCH_IS_64
+config BR2_mips_2
+	bool "mips II"
+	depends on !BR2_ARCH_IS_64
+config BR2_mips_3
+	bool "mips III"
+config BR2_mips_4
+	bool "mips IV"
+config BR2_mips_32
+	bool "mips 32"
+	depends on !BR2_ARCH_IS_64
+config BR2_mips_32r2
+	bool "mips 32r2"
+	depends on !BR2_ARCH_IS_64
+config BR2_mips_64
+	bool "mips 64"
+config BR2_mips_64r2
+	bool "mips 64r2"
+endchoice
+
+
+choice
+	prompt "Target ABI"
+	depends on BR2_mips || BR2_mipsel || BR2_mips64 || BR2_mips64el
+	default BR2_MIPS_OABI32 if !BR2_ARCH_IS_64
+	default BR2_MIPS_NABI32 if BR2_ARCH_IS_64
+
+	help
+	  Application Binary Interface to use
+
+config BR2_MIPS_OABI32
+	bool "o32"
+config BR2_MIPS_NABI32
+	bool "n32"
+	depends on BR2_ARCH_IS_64
+config BR2_MIPS_NABI64
+	bool "n64"
+	depends on BR2_ARCH_IS_64
+endchoice
+
+config BR2_MIPS_SOFT_FLOAT
+	bool "Use soft-float"
+	default y
+	select BR2_SOFT_FLOAT
+	help
+	  If your target CPU does not have a Floating Point Unit (FPU)
+	  or a kernel FPU emulator, but you still wish to support
+	  floating point functions, then everything will need to be
+	  compiled with soft floating point support (-msoft-float).
+
+config BR2_ARCH
+	default "mips"		if BR2_mips
+	default "mipsel"	if BR2_mipsel
+	default "mips64"	if BR2_mips64
+	default "mips64el"	if BR2_mips64el
+
+config BR2_ENDIAN
+	default "LITTLE"	if BR2_mipsel || BR2_mips64el
+	default "BIG" 	    	if BR2_mips || BR2_mips64
+
+config BR2_GCC_TARGET_TUNE
+	default "mips1"		if BR2_mips_1
+	default "mips2"		if BR2_mips_2
+	default "mips3"		if BR2_mips_3
+	default "mips4"		if BR2_mips_4
+	default "mips32"	if BR2_mips_32
+	default "mips32r2"	if BR2_mips_32r2
+	default "mips64"	if BR2_mips_64
+	default "mips64r2"	if BR2_mips_64r2
+
+config BR2_GCC_TARGET_ABI
+	default "32"		if BR2_MIPS_OABI32
+	default "n32"		if BR2_MIPS_NABI32
+	default "64"		if BR2_MIPS_NABI64

arch/Config.in.powerpc

@@ -0,0 +1,146 @@
+choice
+	prompt "Target Architecture Variant"
+	depends on BR2_powerpc
+	default BR2_generic_powerpc
+	help
+	  Specific CPU variant to use
+config BR2_generic_powerpc
+	bool "generic"
+config BR2_powerpc_401
+	bool "401"
+config BR2_powerpc_403
+	bool "403"
+config BR2_powerpc_405
+	bool "405"
+config BR2_powerpc_405fp
+	bool "405 with FPU"
+config BR2_powerpc_440
+	bool "440"
+config BR2_powerpc_440fp
+	bool "440 with FPU"
+config BR2_powerpc_464
+	bool "464"
+config BR2_powerpc_464fp
+	bool "464 with FPU"
+config BR2_powerpc_476
+	bool "476"
+config BR2_powerpc_476fp
+	bool "476 with FPU"
+config BR2_powerpc_505
+	bool "505"
+config BR2_powerpc_601
+	bool "601"
+config BR2_powerpc_602
+	bool "602"
+config BR2_powerpc_603
+	bool "603"
+config BR2_powerpc_603e
+	bool "603e"
+config BR2_powerpc_604
+	bool "604"
+config BR2_powerpc_604e
+	bool "604e"
+config BR2_powerpc_620
+	bool "620"
+config BR2_powerpc_630
+	bool "630"
+config BR2_powerpc_740
+	bool "740"
+config BR2_powerpc_7400
+	bool "7400"
+config BR2_powerpc_7450
+	bool "7450"
+config BR2_powerpc_750
+	bool "750"
+config BR2_powerpc_821
+	bool "821"
+config BR2_powerpc_823
+	bool "823"
+config BR2_powerpc_860
+	bool "860"
+config BR2_powerpc_970
+	bool "970"
+config BR2_powerpc_8540
+	bool "8540 / e500v1"
+config BR2_powerpc_8548
+	bool "8548 / e500v2"
+config BR2_powerpc_e300c2
+	bool "e300c2"
+config BR2_powerpc_e300c3
+	bool "e300c3"
+config BR2_powerpc_e500mc
+	bool "e500mc"
+endchoice
+
+choice
+	prompt "Target ABI"
+	depends on BR2_powerpc
+	default BR2_powerpc_SPE if BR2_powerpc_8540 || BR2_powerpc_8548
+	default BR2_powerpc_CLASSIC
+	help
+	  Application Binary Interface to use
+
+config BR2_powerpc_CLASSIC
+	bool "Classic"
+	depends on !(BR2_powerpc_8540 || BR2_powerpc_8548)
+config BR2_powerpc_SPE
+	bool "SPE"
+	depends on BR2_powerpc_8540 || BR2_powerpc_8548
+endchoice
+
+config BR2_POWERPC_SOFT_FLOAT
+	bool "Use soft-float"
+	select BR2_SOFT_FLOAT
+	help
+	  If your target CPU does not have a Floating Point Unit (FPU)
+	  or a kernel FPU emulator, but you still wish to support
+	  floating point functions, then everything will need to be
+	  compiled with soft floating point support (-msoft-float).
+
+config BR2_ARCH
+	default "powerpc"	if BR2_powerpc
+
+config BR2_ENDIAN
+	default "BIG"
+
+config BR2_GCC_TARGET_TUNE
+	default "401"		if BR2_powerpc_401
+	default "403"		if BR2_powerpc_403
+	default "405"		if BR2_powerpc_405
+	default "405fp"		if BR2_powerpc_405fp
+	default "440"		if BR2_powerpc_440
+	default "440fp"		if BR2_powerpc_440fp
+	default "464"		if BR2_powerpc_464
+	default "464fp"		if BR2_powerpc_464fp
+	default "476"		if BR2_powerpc_476
+	default "476fp"		if BR2_powerpc_476fp
+	default "505"		if BR2_powerpc_505
+	default "601"		if BR2_powerpc_601
+	default "602"		if BR2_powerpc_602
+	default "603"		if BR2_powerpc_603
+	default "603e"		if BR2_powerpc_603e
+	default "604"		if BR2_powerpc_604
+	default "604e"		if BR2_powerpc_604e
+	default "620"		if BR2_powerpc_620
+	default "630"		if BR2_powerpc_630
+	default "740"		if BR2_powerpc_740
+	default "7400"		if BR2_powerpc_7400
+	default "7450"		if BR2_powerpc_7450
+	default "750"		if BR2_powerpc_750
+	default "821"		if BR2_powerpc_821
+	default "823"		if BR2_powerpc_823
+	default "860"		if BR2_powerpc_860
+	default "970"		if BR2_powerpc_970
+	default "8540"		if BR2_powerpc_8540
+	default	"8548"		if BR2_powerpc_8548
+	default "e300c2"	if BR2_powerpc_e300c2
+	default "e300c3"	if BR2_powerpc_e300c3
+	default "e500mc"	if BR2_powerpc_e500mc
+
+config BR2_GCC_TARGET_ABI
+	default "altivec"		if BR2_PPC_ABI_altivec
+	default "no-altivec"		if BR2_PPC_ABI_no-altivec
+	default "spe"			if BR2_PPC_ABI_spe
+	default "no-spe"		if BR2_PPC_ABI_no-spe
+	default "ibmlongdouble"		if BR2_PPC_ABI_ibmlongdouble
+	default "ieeelongdouble"	if BR2_PPC_ABI_ieeelongdouble

arch/Config.in.sh

@@ -0,0 +1,41 @@
+choice
+	prompt "Target Architecture Variant"
+	depends on BR2_sh
+	default BR2_sh4
+	help
+	  Specific CPU variant to use
+
+config BR2_sh2
+	bool "sh2 (SH2 big endian)"
+config BR2_sh2a
+	bool "sh2a (SH2A big endian)"
+config BR2_sh3
+	bool "sh3 (SH3 little endian)"
+config BR2_sh3eb
+	bool "sh3eb (SH3 big endian)"
+config BR2_sh4
+	bool "sh4 (SH4 little endian)"
+config BR2_sh4eb
+	bool "sh4eb (SH4 big endian)"
+config BR2_sh4a
+	bool "sh4a (SH4A little endian)"
+config BR2_sh4aeb
+	bool "sh4aeb (SH4A big endian)"
+endchoice
+
+config BR2_ARCH
+	default "sh2"		if BR2_sh2
+	default "sh2a"		if BR2_sh2a
+	default "sh3"		if BR2_sh3
+	default "sh3eb"		if BR2_sh3eb
+	default "sh4"		if BR2_sh4
+	default "sh4eb"		if BR2_sh4eb
+	default "sh4a"		if BR2_sh4a
+	default "sh4aeb"	if BR2_sh4aeb
+	default "sh64"		if BR2_sh64
+
+config BR2_ENDIAN
+	default "LITTLE"	if BR2_sh3 || BR2_sh4 || BR2_sh4a || \
+				   BR2_x86_64 || BR2_sh64
+	default "BIG"		if BR2_sh2 || BR2_sh2a || BR2_sh3eb || \
+				   BR2_sh4eb || BR2_sh4aeb

arch/Config.in.sparc

@@ -0,0 +1,39 @@
+choice
+	prompt "Target Architecture Variant"
+	depends on BR2_sparc
+	default BR2_sparc_v8
+	help
+	  Specific CPU variant to use
+
+config BR2_sparc_v8
+	bool "v8"
+config BR2_sparc_sparchfleon
+	bool "hfleon"
+config BR2_sparc_sparchfleonv8
+	bool "hfleonv8"
+config BR2_sparc_sparcsfleon
+	bool "sfleon"
+config BR2_sparc_sparcsfleonv8
+	bool "sfleonv8"
+endchoice
+
+config BR2_ARCH
+	default "sparc"	if BR2_sparc
+
+config BR2_ENDIAN
+	default "BIG"
+
+config BR2_GCC_TARGET_TUNE
+	default "v8"		if BR2_sparc_v8
+	default "v9"		if BR2_sparc_v9
+	default "v9"		if BR2_sparc_v9a
+	default "v9"		if BR2_sparc_v9b
+	default "ultrasparc"	if BR2_sparc_ultrasparc
+	default "ultrasparc3"	if BR2_sparc_ultrasparc3
+	default "niagara"	if BR2_sparc_niagara
+
+config BR2_GCC_TARGET_CPU
+	default "sparchfleon"	if BR2_sparc_sparchfleon
+	default "sparchfleonv8"	if BR2_sparc_sparchfleonv8
+	default "sparcsfleon"	if BR2_sparc_sparcsfleon
+	default "sparcsfleonv8"	if BR2_sparc_sparcsfleonv8

arch/Config.in.x86

@@ -0,0 +1,236 @@
+# i386/x86_64 cpu features
+config BR2_X86_CPU_HAS_MMX
+	bool
+config BR2_X86_CPU_HAS_SSE
+	bool
+config BR2_X86_CPU_HAS_SSE2
+	bool
+config BR2_X86_CPU_HAS_SSE3
+	bool
+config BR2_X86_CPU_HAS_SSSE3
+	bool
+
+choice
+	prompt "Target Architecture Variant"
+	depends on BR2_i386 || BR2_x86_64
+	default BR2_x86_i586 if BR2_i386
+	default BR2_x86_generic if BR2_x86_64
+	help
+	  Specific CPU variant to use
+
+config BR2_x86_generic
+	bool "generic"
+config BR2_x86_i386
+	bool "i386"
+	depends on !BR2_x86_64
+config BR2_x86_i486
+	bool "i486"
+	depends on !BR2_x86_64
+config BR2_x86_i586
+	bool "i586"
+	depends on !BR2_x86_64
+config BR2_x86_i686
+	bool "i686"
+	depends on !BR2_x86_64
+config BR2_x86_pentiumpro
+	bool "pentium pro"
+	depends on !BR2_x86_64
+config BR2_x86_pentium_mmx
+	bool "pentium MMX"
+	select BR2_X86_CPU_HAS_MMX
+	depends on !BR2_x86_64
+config BR2_x86_pentium_m
+	bool "pentium mobile"
+	select BR2_X86_CPU_HAS_MMX
+	select BR2_X86_CPU_HAS_SSE
+	depends on !BR2_x86_64
+config BR2_x86_pentium2
+	bool "pentium2"
+	select BR2_X86_CPU_HAS_MMX
+	depends on !BR2_x86_64
+config BR2_x86_pentium3
+	bool "pentium3"
+	select BR2_X86_CPU_HAS_MMX
+	select BR2_X86_CPU_HAS_SSE
+	depends on !BR2_x86_64
+config BR2_x86_pentium4
+	bool "pentium4"
+	select BR2_X86_CPU_HAS_MMX
+	select BR2_X86_CPU_HAS_SSE
+	select BR2_X86_CPU_HAS_SSE2
+	depends on !BR2_x86_64
+config BR2_x86_prescott
+	bool "prescott"
+	select BR2_X86_CPU_HAS_MMX
+	select BR2_X86_CPU_HAS_SSE
+	select BR2_X86_CPU_HAS_SSE2
+	select BR2_X86_CPU_HAS_SSE3
+	depends on !BR2_x86_64
+config BR2_x86_nocona
+	bool "nocona"
+	select BR2_X86_CPU_HAS_MMX
+	select BR2_X86_CPU_HAS_SSE
+	select BR2_X86_CPU_HAS_SSE2
+	select BR2_X86_CPU_HAS_SSE3
+config BR2_x86_core2
+	bool "core2"
+	select BR2_X86_CPU_HAS_MMX
+	select BR2_X86_CPU_HAS_SSE
+	select BR2_X86_CPU_HAS_SSE2
+	select BR2_X86_CPU_HAS_SSE3
+	select BR2_X86_CPU_HAS_SSSE3
+config BR2_x86_atom
+	bool "atom"
+	select BR2_X86_CPU_HAS_MMX
+	select BR2_X86_CPU_HAS_SSE
+	select BR2_X86_CPU_HAS_SSE2
+	select BR2_X86_CPU_HAS_SSE3
+	select BR2_X86_CPU_HAS_SSSE3
+config BR2_x86_k6
+	bool "k6"
+	select BR2_X86_CPU_HAS_MMX
+	depends on !BR2_x86_64
+config BR2_x86_k6_2
+	bool "k6-2"
+	select BR2_X86_CPU_HAS_MMX
+	depends on !BR2_x86_64
+config BR2_x86_athlon
+	bool "athlon"
+	select BR2_X86_CPU_HAS_MMX
+	depends on !BR2_x86_64
+config BR2_x86_athlon_4
+	bool "athlon-4"
+	select BR2_X86_CPU_HAS_MMX
+	select BR2_X86_CPU_HAS_SSE
+	depends on !BR2_x86_64
+config BR2_x86_opteron
+	bool "opteron"
+	select BR2_X86_CPU_HAS_MMX
+	select BR2_X86_CPU_HAS_SSE
+	select BR2_X86_CPU_HAS_SSE2
+config BR2_x86_opteron_sse3
+	bool "opteron w/ SSE3"
+	select BR2_X86_CPU_HAS_MMX
+	select BR2_X86_CPU_HAS_SSE
+	select BR2_X86_CPU_HAS_SSE2
+	select BR2_X86_CPU_HAS_SSE3
+config BR2_x86_barcelona
+	bool "barcelona"
+	select BR2_X86_CPU_HAS_MMX
+	select BR2_X86_CPU_HAS_SSE
+	select BR2_X86_CPU_HAS_SSE2
+	select BR2_X86_CPU_HAS_SSE3
+config BR2_x86_geode
+	bool "geode"
+	# Don't include MMX support because there several variant of geode
+	# processor, some with MMX support, some without.
+	# See: http://en.wikipedia.org/wiki/Geode_%28processor%29
+	depends on !BR2_x86_64
+config BR2_x86_c3
+	bool "Via/Cyrix C3 (Samuel/Ezra cores)"
+	select BR2_X86_CPU_HAS_MMX
+	depends on !BR2_x86_64
+config BR2_x86_c32
+	bool "Via C3-2 (Nehemiah cores)"
+	select BR2_X86_CPU_HAS_MMX
+	select BR2_X86_CPU_HAS_SSE
+	depends on !BR2_x86_64
+config BR2_x86_winchip_c6
+	bool "IDT Winchip C6"
+	select BR2_X86_CPU_HAS_MMX
+	depends on !BR2_x86_64
+config BR2_x86_winchip2
+	bool "IDT Winchip 2"
+	select BR2_X86_CPU_HAS_MMX
+	depends on !BR2_x86_64
+endchoice
+
+config BR2_ARCH
+	default "i386"		if BR2_x86_i386
+	default "i486"		if BR2_x86_i486
+	default "i586"		if BR2_x86_i586
+	default "i586"		if BR2_x86_pentium_mmx
+	default "i586"		if BR2_x86_geode
+	default "i586"		if BR2_x86_c3
+	default "i686"		if BR2_x86_c32
+	default "i586"		if BR2_x86_winchip_c6
+	default "i586"		if BR2_x86_winchip2
+	default "i686"		if BR2_x86_i686
+	default "i686"		if BR2_x86_pentium2
+	default "i686"		if BR2_x86_pentium3
+	default "i686"		if BR2_x86_pentium4
+	default "i686"		if BR2_x86_pentium_m
+	default "i686"		if BR2_x86_pentiumpro
+	default "i686"		if BR2_x86_prescott
+	default "i686"		if BR2_x86_nocona && BR2_i386
+	default "i686"		if BR2_x86_core2 && BR2_i386
+	default "i686"		if BR2_x86_atom && BR2_i386
+	default "i686"		if BR2_x86_opteron && BR2_i386
+	default "i686"		if BR2_x86_opteron_sse3 && BR2_i386
+	default "i686"		if BR2_x86_barcelona && BR2_i386
+	default "i686"		if BR2_x86_k6
+	default "i686"		if BR2_x86_k6_2
+	default "i686"		if BR2_x86_athlon
+	default "i686"		if BR2_x86_athlon_4
+	default "x86_64"	if BR2_x86_64
+	default "i386"		if BR2_x86_generic
+
+config BR2_ENDIAN
+	default "LITTLE"
+
+config BR2_GCC_TARGET_TUNE
+	default "i386"		if BR2_x86_i386
+	default "i486"		if BR2_x86_i486
+	default "i586"		if BR2_x86_i586
+	default "pentium-mmx"	if BR2_x86_pentium_mmx
+	default "i686"		if BR2_x86_i686
+	default "pentiumpro"	if BR2_x86_pentiumpro
+	default "pentium-m"	if BR2_x86_pentium_m
+	default "pentium2"	if BR2_x86_pentium2
+	default "pentium3"	if BR2_x86_pentium3
+	default "pentium4"	if BR2_x86_pentium4
+	default "prescott"	if BR2_x86_prescott
+	default "nocona"	if BR2_x86_nocona
+	default "core2"		if BR2_x86_core2
+	default "atom"		if BR2_x86_atom
+	default "k8"		if BR2_x86_opteron
+	default "k8-sse3"	if BR2_x86_opteron_sse3
+	default "barcelona"	if BR2_x86_barcelona
+	default "k6"		if BR2_x86_k6
+	default "k6-2"		if BR2_x86_k6_2
+	default "athlon"	if BR2_x86_athlon
+	default "athlon-4"	if BR2_x86_athlon_4
+	default "winchip-c6"	if BR2_x86_winchip_c6
+	default "winchip2"	if BR2_x86_winchip2
+	default "c3"		if BR2_x86_c3
+	default "c3-2"		if BR2_x86_c32
+	default "geode"		if BR2_x86_geode
+	default "generic"	if BR2_x86_generic
+
+config BR2_GCC_TARGET_ARCH
+	default "i386"		if BR2_x86_i386
+	default "i486"		if BR2_x86_i486
+	default "i586"		if BR2_x86_i586
+	default "pentium-mmx"	if BR2_x86_pentium_mmx
+	default "i686"		if BR2_x86_i686
+	default "pentiumpro"	if BR2_x86_pentiumpro
+	default "pentium-m"	if BR2_x86_pentium_m
+	default "pentium2"	if BR2_x86_pentium2
+	default "pentium3"	if BR2_x86_pentium3
+	default "pentium4"	if BR2_x86_pentium4
+	default "prescott"	if BR2_x86_prescott
+	default "nocona"	if BR2_x86_nocona
+	default "core2"		if BR2_x86_core2
+	default "atom"		if BR2_x86_atom
+	default "k8"		if BR2_x86_opteron
+	default "k8-sse3"	if BR2_x86_opteron_sse3
+	default "barcelona"	if BR2_x86_barcelona
+	default "k6"		if BR2_x86_k6
+	default "k6-2"		if BR2_x86_k6_2
+	default "athlon"	if BR2_x86_athlon
+	default "athlon-4"	if BR2_x86_athlon_4
+	default "winchip-c6"	if BR2_x86_winchip_c6
+	default "winchip2"	if BR2_x86_winchip2
+	default "c3"		if BR2_x86_c3
+	default "c3-2"		if BR2_x86_c32
+	default "geode"		if BR2_x86_geode

arch/Config.in.xtensa

@@ -0,0 +1,37 @@
+choice
+	prompt "Target Architecture Variant"
+	depends on BR2_xtensa
+	default BR2_xtensa_fsf
+config BR2_XTENSA_CUSTOM
+	bool "Custom Xtensa processor configuration"
+config BR2_xtensa_fsf
+	bool "fsf - Default configuration"
+endchoice
+
+config BR2_XTENSA_CUSTOM_NAME
+	string "Custom Xtensa processor configuration name"
+	depends on BR2_XTENSA_CUSTOM
+	default ""
+	help
+	  Name given to a custom Xtensa processor configuration.
+
+config BR2_XTENSA_CORE_NAME
+	string
+	default BR2_XTENSA_CUSTOM_NAME	if BR2_XTENSA_CUSTOM
+	default ""			if BR2_xtensa_fsf
+
+config BR2_XTENSA_OVERLAY_DIR
+	string "Overlay directory for custom configuration"
+	depends on BR2_XTENSA_CUSTOM
+	default ""
+	help
+	  Provide the directory path that contains the overlay file
+	  for a custom processor configuration. The path is relative
+	  to the top directory of buildroot.
+	  These overlay files are tar packages with updated configuration
+	  files for various toolchain packages and Xtensa processor
+	  configurations. They are provided by the processor vendor or
+	  directly from Tensilica.
+
+config BR2_ARCH
+	default "xtensa"	if BR2_xtensa

board/arm/foundation-v8/readme.txt

@@ -0,0 +1,19 @@
+This is the support for the ARM Foundation v8 machine emulated by the
+ARM software simulator of the AArch64 architecture.
+
+First, one has to download the AArch64 software simulator from:
+
+  https://silver.arm.com/download/download.tm?pv=1317469
+
+Then, use the arm_foundationv8_defconfig configuration to build your
+Buildroot system.
+
+Finally, boot your system with:
+
+ ${LOCATION_OF_FOUNDATIONV8_SIMULATOR}/Foundation_v8 \
+    --image output/images/linux-system.axf \
+    --block-device output/images/rootfs.ext2 \
+    --network=nat
+
+You can get network access from within the simulated environment
+by requesting an IP address using DHCP (run the command 'udhcpc').

board/armadeus/apf27/linux-3.8.config

@@ -0,0 +1,229 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CGROUPS=y
+CONFIG_EMBEDDED=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_ARCH_MULTI_V7 is not set
+CONFIG_ARCH_MXC=y
+CONFIG_MXC_IRQ_PRIOR=y
+CONFIG_MACH_IMX27_DT=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_FPE_NWFPE=y
+CONFIG_FPE_NWFPE_XP=y
+CONFIG_PM_DEBUG=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+CONFIG_IPV6=y
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+CONFIG_CAN_VCAN=m
+CONFIG_CAN_MCP251X=m
+CONFIG_BT=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_HIDP=m
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_CFG80211=m
+CONFIG_MAC80211=m
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+# CONFIG_MTD_CFI_I2 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_MXC=y
+CONFIG_MTD_UBI=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_EEPROM_AT24=y
+CONFIG_EEPROM_AT25=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_SMSC_PHY=y
+CONFIG_RTL8187=m
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_RT2X00=m
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RTL8192CU=m
+CONFIG_ZD1211RW=m
+CONFIG_INPUT_JOYDEV=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_IMX=m
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_IMX=y
+CONFIG_SPI=y
+CONFIG_SPI_IMX=y
+CONFIG_SPI_SPIDEV=m
+CONFIG_GPIO_SYSFS=y
+CONFIG_W1=y
+CONFIG_W1_MASTER_MXC=y
+CONFIG_W1_SLAVE_THERM=y
+CONFIG_WATCHDOG=y
+CONFIG_IMX2_WDT=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_MEDIA_SUPPORT=m
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_USB_SUPPORT=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_PWC=m
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_SOC_CAMERA=m
+CONFIG_VIDEO_MX2=m
+# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
+# CONFIG_DVB_AU8522_V4L is not set
+# CONFIG_DVB_TUNER_DIB0070 is not set
+# CONFIG_DVB_TUNER_DIB0090 is not set
+CONFIG_FB=y
+# CONFIG_FB_MX3 is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_SOUND=m
+CONFIG_SND=m
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=m
+CONFIG_SND_IMX_SOC=m
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_MXC=y
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_USB_CHIPIDEA_DEBUG=y
+CONFIG_USB_ACM=y
+CONFIG_USB_PRINTER=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_FTDI_SIO=y
+CONFIG_USB_SERIAL_PL2303=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=m
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_USB_G_HID=m
+CONFIG_USB_ULPI=y
+CONFIG_MMC=y
+CONFIG_MMC_MXC=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_LEDS_TRIGGER_TRANSIENT=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_DS1374=y
+CONFIG_RTC_DRV_MXC=m
+CONFIG_DMADEVICES=y
+CONFIG_IMX_SDMA=y
+CONFIG_IMX_DMA=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_IIO=m
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_DNOTIFY is not set
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_UBIFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_15=m
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_FS=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_PREEMPT is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_LL=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set

board/armadeus/apf28/linux-3.8.config

@@ -0,0 +1,180 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_EMBEDDED=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_BSD_DISKLABEL=y
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_MXS=y
+CONFIG_MACH_MXS_DT=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CPU_IDLE=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+CONFIG_IPV6=y
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+CONFIG_CAN_VCAN=m
+CONFIG_CAN_FLEXCAN=m
+CONFIG_BT=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+CONFIG_BT_HCIBTUSB=m
+CONFIG_CFG80211=m
+CONFIG_MAC80211=m
+CONFIG_MAC80211_RC_PID=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_FW_LOADER=m
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_GPMI_NAND=y
+CONFIG_MTD_UBI=y
+CONFIG_EEPROM_AT24=y
+CONFIG_EEPROM_AT25=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_SCH=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_NETDEVICES=y
+CONFIG_RTL8187=m
+CONFIG_RT2X00=m
+CONFIG_RT73USB=m
+CONFIG_ZD1211RW=m
+CONFIG_INPUT_JOYDEV=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_UINPUT=m
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_MXS_AUART=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MXS=y
+CONFIG_SPI=y
+CONFIG_SPI_BITBANG=m
+CONFIG_SPI_MXS=y
+CONFIG_SPI_SPIDEV=m
+CONFIG_GPIO_SYSFS=y
+CONFIG_HWMON=m
+CONFIG_WATCHDOG=y
+CONFIG_MEDIA_SUPPORT=m
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_FB=y
+CONFIG_FB_MXS=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_PWM=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_MON=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_USB_ACM=y
+CONFIG_USB_PRINTER=y
+CONFIG_USB_WDM=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_ETH=m
+CONFIG_USB_ULPI=y
+CONFIG_USB_MXS_PHY=y
+CONFIG_MMC=y
+CONFIG_MMC_MXS=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_STMP=y
+CONFIG_DMADEVICES=y
+CONFIG_MXS_DMA=y
+CONFIG_STAGING=y
+CONFIG_MXS_LRADC=y
+CONFIG_IIO=y
+CONFIG_PWM=y
+CONFIG_PWM_MXS=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT2_FS_XIP=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_UBIFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_DEBUG_FS=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set

board/atmel/at91sam9260ek/linux-3.9.config

@@ -0,0 +1,98 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_KERNEL_LZO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_AT91=y
+CONFIG_ARCH_AT91SAM9260=y
+CONFIG_ARCH_AT91SAM9260_SAM9XE=y
+CONFIG_MACH_AT91SAM9260EK=y
+CONFIG_MACH_CAM60=y
+CONFIG_MACH_SAM9_L9260=y
+CONFIG_MACH_AFEB9260=y
+CONFIG_MACH_USB_A9260=y
+CONFIG_MACH_QIL_A9260=y
+CONFIG_MACH_CPU9260=y
+CONFIG_MACH_FLEXIBITY=y
+CONFIG_MACH_SNAPPER_9260=y
+CONFIG_MACH_AT91SAM_DT=y
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+# CONFIG_ARM_THUMB is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
+CONFIG_FPE_NWFPE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_GPIO=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_AT91SAM9X_WATCHDOG=y
+# CONFIG_USB_HID is not set
+CONFIG_USB=y
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_MON=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_DEBUG=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_USB_G_SERIAL=m
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_AT91SAM9=y
+CONFIG_EXT2_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_UBIFS_FS=y
+CONFIG_CRAMFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_LL=y

board/beaglebone/linux-3.2.9.config

@@ -1,252 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_DEFAULT_HOSTNAME="beaglebone"
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_FHANDLE=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_NAMESPACES=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_BLK_DEV_INTEGRITY=y
-CONFIG_ARCH_OMAP=y
-CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MBOX_FWK=y
-# CONFIG_OMAP_32K_TIMER is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP4 is not set
-# CONFIG_SOC_OMAP3430 is not set
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_DEVKIT8000 is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OMAP3530_LV_SOM is not set
-# CONFIG_MACH_OMAP3_TORPEDO is not set
-# CONFIG_MACH_ENCORE is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3EVM is not set
-# CONFIG_MACH_OMAP3517EVM is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
-# CONFIG_MACH_OMAP3_TOUCHBOOK is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_NOKIA_RM680 is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_ZOOM2 is not set
-# CONFIG_MACH_OMAP_ZOOM3 is not set
-# CONFIG_MACH_CM_T35 is not set
-# CONFIG_MACH_CM_T3517 is not set
-# CONFIG_MACH_IGEP0020 is not set
-# CONFIG_MACH_IGEP0030 is not set
-# CONFIG_MACH_SBC3530 is not set
-# CONFIG_MACH_OMAP_3630SDP is not set
-# CONFIG_MACH_TI8168EVM is not set
-# CONFIG_MACH_TI8148EVM is not set
-# CONFIG_MACH_AM335XIAEVM is not set
-CONFIG_OMAP3_EDMA=y
-CONFIG_ARM_THUMBEE=y
-CONFIG_ARM_ERRATA_430973=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_THUMB2_KERNEL=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=" debug "
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_BINFMT_MISC=y
-# CONFIG_SUSPEND is not set
-CONFIG_PM_DEBUG=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_RFKILL_REGULATOR=m
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_CONNECTOR=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=2
-CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_MISC_DEVICES=y
-CONFIG_BMP085=m
-CONFIG_EEPROM_AT24=y
-CONFIG_EEPROM_93CX6=m
-CONFIG_SENSORS_LIS3_I2C=y
-CONFIG_NETDEVICES=y
-CONFIG_MII=y
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_CHELSIO is not set
-# CONFIG_NET_VENDOR_FARADAY is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_MICROCHIP is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_NET_VENDOR_SEEQ is not set
-# CONFIG_NET_VENDOR_SMSC is not set
-# CONFIG_NET_VENDOR_STMICRO is not set
-CONFIG_TI_CPSW=y
-CONFIG_SMSC_PHY=y
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_MOUSE_PS2 is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_AD714X=m
-CONFIG_INPUT_BMA150=m
-CONFIG_INPUT_MMA8450=m
-CONFIG_INPUT_MPU3050=m
-CONFIG_INPUT_ATI_REMOTE2=m
-CONFIG_INPUT_KEYSPAN_REMOTE=m
-CONFIG_INPUT_KXTJ9=m
-CONFIG_INPUT_POWERMATE=m
-CONFIG_INPUT_YEALINK=m
-CONFIG_INPUT_CM109=m
-CONFIG_INPUT_TWL4030_PWRBUTTON=y
-CONFIG_INPUT_TWL4030_VIBRA=m
-CONFIG_INPUT_TWL6040_VIBRA=m
-CONFIG_INPUT_UINPUT=m
-CONFIG_INPUT_PCF8574=m
-CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
-CONFIG_INPUT_ADXL34X=m
-CONFIG_INPUT_CMA3000=m
-CONFIG_INPUT_CMA3000_I2C=m
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-CONFIG_HW_RANDOM=y
-CONFIG_RAW_DRIVER=m
-CONFIG_I2C_CHARDEV=y
-CONFIG_SPI=y
-CONFIG_SPI_GPIO=m
-CONFIG_SPI_OMAP24XX=y
-CONFIG_SPI_SPIDEV=m
-CONFIG_DEBUG_GPIO=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_TWL4030=y
-CONFIG_GENERIC_PWM=y
-CONFIG_DAVINCI_EHRPWM=y
-CONFIG_ECAP_PWM=y
-CONFIG_POWER_SUPPLY=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_OMAP_WATCHDOG=y
-CONFIG_TWL4030_WATCHDOG=y
-CONFIG_MFD_TPS65217=y
-CONFIG_REGULATOR_DUMMY=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
-CONFIG_REGULATOR_USERSPACE_CONSUMER=y
-CONFIG_REGULATOR_GPIO=y
-CONFIG_REGULATOR_TWL4030=y
-CONFIG_REGULATOR_TPS65023=y
-CONFIG_REGULATOR_TPS6507X=y
-CONFIG_REGULATOR_TPS65217=y
-CONFIG_DISPLAY_SUPPORT=y
-CONFIG_HIDRAW=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_TI81XX_GLUE=y
-CONFIG_USB_TI_CPPI41_DMA_HW=y
-CONFIG_USB_ACM=y
-CONFIG_USB_LIBUSUAL=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_ETH=m
-CONFIG_USB_MASS_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_CDC_COMPOSITE=m
-CONFIG_USB_G_MULTI=m
-CONFIG_USB_G_HID=m
-CONFIG_MMC=y
-CONFIG_MMC_UNSAFE_RESUME=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_UIO=m
-CONFIG_UIO_PDRV=m
-CONFIG_UIO_PDRV_GENIRQ=m
-CONFIG_UIO_PRUSS=m
-CONFIG_STAGING=y
-CONFIG_IIO=y
-CONFIG_IIO_BUFFER=y
-CONFIG_IIO_SW_RING=y
-CONFIG_IIO_KFIFO_BUF=y
-# CONFIG_IOMMU_SUPPORT is not set
-CONFIG_PM_DEVFREQ=y
-CONFIG_DEVFREQ_GOV_USERSPACE=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_FANOTIFY=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_NETWORK_FILESYSTEMS is not set
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=y
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_SCHEDSTATS=y
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_LL=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_DEBUG_JTAG_ENABLE=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set

board/beaglebone/linux-3.8.config

@@ -0,0 +1,203 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_DEFAULT_HOSTNAME="beaglebone"
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EMBEDDED=y
+CONFIG_SLAB=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_ARCH_OMAP=y
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_MUX_DEBUG=y
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
+# CONFIG_ARCH_OMAP4 is not set
+CONFIG_ARM_THUMBEE=y
+CONFIG_ARM_ERRATA_720789=y
+CONFIG_ARM_ARCH_TIMER=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200"
+CONFIG_KEXEC=y
+CONFIG_AUTO_ZRELADDR=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_NEON=y
+CONFIG_BINFMT_MISC=y
+CONFIG_PM_DEBUG=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_OMAP_OCP2SCP=y
+CONFIG_OMAP_INTERCONNECT=y
+CONFIG_CONNECTOR=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_EEPROM_93CX6=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_ATA=y
+# CONFIG_SATA_PMP is not set
+CONFIG_SATA_AHCI_PLATFORM=m
+# CONFIG_ATA_SFF is not set
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+CONFIG_TI_CPSW=y
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_WLAN is not set
+CONFIG_INPUT_POLLDEV=m
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_MISC=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_SPI=y
+CONFIG_SPI_OMAP24XX=y
+CONFIG_DEBUG_PINCTRL=y
+CONFIG_PINCTRL_SINGLE=y
+CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_W1=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_THERMAL=y
+CONFIG_THERMAL_GOV_FAIR_SHARE=y
+CONFIG_THERMAL_GOV_USER_SPACE=y
+CONFIG_CPU_THERMAL=y
+CONFIG_WATCHDOG=y
+CONFIG_OMAP_WATCHDOG=y
+CONFIG_MFD_TPS65217=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_TPS65023=y
+CONFIG_REGULATOR_TPS6507X=y
+CONFIG_REGULATOR_TPS65217=y
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_MON=y
+CONFIG_USB_MUSB_HDRC=m
+CONFIG_USB_MUSB_AM35X=m
+CONFIG_USB_STORAGE=y
+CONFIG_USB_TEST=y
+CONFIG_OMAP_USB2=m
+CONFIG_OMAP_USB3=m
+CONFIG_OMAP_CONTROL_USB=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DEBUG=y
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_DEBUG_FS=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_EEM=y
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_USB_G_MULTI=m
+CONFIG_USB_G_MULTI_CDC=y
+CONFIG_MMC=y
+CONFIG_MMC_UNSAFE_RESUME=y
+CONFIG_SDIO_UART=y
+CONFIG_MMC_OMAP=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_OMAP=y
+CONFIG_DMADEVICES=y
+CONFIG_TI_EDMA=y
+CONFIG_DMA_OMAP=y
+CONFIG_STAGING=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=y
+CONFIG_QUOTA=y
+CONFIG_QFMT_V2=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_PRINTK_TIME=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+CONFIG_PROVE_LOCKING=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRC_CCITT=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC7=y
+CONFIG_LIBCRC32C=y
+CONFIG_AVERAGE=y

board/beaglebone/uboot-v2011.09_AM335xPSP_04.06.00.06-0001-am335x_evm.h-Specify-ext2-and-ro-for-booting-rootfs.patch

@@ -1,31 +0,0 @@
-From c8aae8c96494132759319b0eab6cd2a51d1d4889 Mon Sep 17 00:00:00 2001
-From: Frank Hunleth <fhunleth@troodon-software.com>
-Date: Tue, 6 Mar 2012 07:20:26 -0800
-Subject: [PATCH] am335x_evm.h: Specify ext2 and ro for booting rootfs
-
-Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
----
- include/configs/am335x_evm.h |    4 ++--
- 1 files changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
-index e0ac494..b45c306 100755
---- a/include/configs/am335x_evm.h
-+++ b/include/configs/am335x_evm.h
-@@ -53,11 +53,11 @@
- 	"script_addr=0x81900000\0" \
- 	"console=ttyO0,115200n8\0" \
- 	"mmc_dev=0\0" \
--	"mmc_root=/dev/mmcblk0p2 rw\0" \
-+	"mmc_root=/dev/mmcblk0p2 ro\0" \
- 	"nand_root=ubi0:rootfs rw ubi.mtd=7,2048\0" \
- 	"spi_root=/dev/mtdblock4 rw\0" \
- 	"nor_root=/dev/mtdblock3 rw\0" \
--	"mmc_root_fs_type=ext3 rootwait\0" \
-+	"mmc_root_fs_type=ext2 rootwait\0" \
- 	"nand_root_fs_type=ubifs rootwait=1\0" \
- 	"spi_root_fs_type=jffs2\0" \
- 	"nor_root_fs_type=jffs2\0" \
--- 
-1.7.4.1
-

board/boundarydevices/nitrogen6x/post-build.sh

@@ -0,0 +1,18 @@
+#!/bin/sh
+# post-build fixups
+# for furthe details, see
+# http://boundarydevices.com/u-boot-conventions-for-i-mx6-nitrogen6x-and-sabrelite/
+
+TARGET_DIR=$1
+IMAGES_DIR=$1/../images
+BOARD_DIR="$(dirname $0)"
+
+# bd u-boot looks for bootscript here
+cp $BOARD_DIR/6q_bootscript $TARGET_DIR
+
+# u-boot / update script for bd upgradeu command
+if [ -e $IMAGES_DIR/u-boot.bin ];
+then
+    cp $IMAGES_DIR/u-boot.bin $TARGET_DIR
+    cp $BOARD_DIR/6q_upgrade $TARGET_DIR
+fi

board/boundarydevices/nitrogen6x/readme.txt

@@ -0,0 +1,9 @@
+Buildroot for Boundary Devices Nitrogen6X:
+
+http://boundarydevices.com/products/nitrogen6x-board-imx6-arm-cortex-a9-sbc/
+
+To install, simply extract rootfs.ext2 to first partition of a uSD card:
+
+sudo dd if=output/images/rootfs.ext2 of=/dev/sdX1
+
+Where 'sdX1' is the device node of the uSD partition.

board/calao/qil-a9260/at91bootstrap-1.16-qil-a9260.patch

@@ -0,0 +1,603 @@
+From a3e08beea8bf5e96e1237eef4a82f4a2fdd5286b Mon Sep 17 00:00:00 2001
+From: Gregory Hermant <gregory.hermant@calao-systems.com>
+Date: Thu, 19 Jul 2012 14:19:59 +0200
+Subject: [PATCH] Add support for the Calao-systems QIL-A9260
+
+
+Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
+---
+ board/qil_a9260/nandflash/Makefile    |  122 ++++++++++++++
+ board/qil_a9260/nandflash/qil-a9260.h |  109 ++++++++++++
+ board/qil_a9260/qil_a9260.c           |  298 +++++++++++++++++++++++++++++++++
+ crt0_gnu.S                            |    7 +
+ include/part.h                        |    6 +-
+ 5 files changed, 541 insertions(+), 1 deletions(-)
+ create mode 100644 board/qil_a9260/nandflash/Makefile
+ create mode 100644 board/qil_a9260/nandflash/qil-a9260.h
+ create mode 100644 board/qil_a9260/qil_a9260.c
+
+diff --git a/board/qil_a9260/nandflash/Makefile b/board/qil_a9260/nandflash/Makefile
+new file mode 100644
+index 0000000..209a25f
+--- /dev/null
++++ b/board/qil_a9260/nandflash/Makefile
+@@ -0,0 +1,122 @@
++# TODO: set this appropriately for your local toolchain
++ifndef ERASE_FCT
++ERASE_FCT=rm -f
++endif
++ifndef CROSS_COMPILE
++CROSS_COMPILE=arm-elf-
++endif
++
++TOOLCHAIN=gcc
++
++BOOTSTRAP_PATH=../../..
++
++# NandFlashBoot Configuration for QIL-A9260
++
++# Target name (case sensitive!!!)
++TARGET=AT91SAM9260
++# Board name (case sensitive!!!)
++BOARD=qil_a9260
++# Link Address and Top_of_Memory
++LINK_ADDR=0x200000
++TOP_OF_MEMORY=0x301000
++# Name of current directory
++PROJECT=nandflash
++
++ifndef BOOT_NAME
++BOOT_NAME=$(PROJECT)_$(BOARD)
++endif
++
++INCL=./$(BOOTSTRAP_PATH)/board/$(BOARD)/$(PROJECT)
++
++ifeq ($(TOOLCHAIN), gcc)
++
++AS=$(CROSS_COMPILE)gcc
++CC=$(CROSS_COMPILE)gcc
++LD=$(CROSS_COMPILE)gcc
++NM= $(CROSS_COMPILE)nm
++SIZE=$(CROSS_COMPILE)size
++OBJCOPY=$(CROSS_COMPILE)objcopy
++OBJDUMP=$(CROSS_COMPILE)objdump
++CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL)
++ASFLAGS=-g -mcpu=arm926ej-s -c -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
++
++# Linker flags.
++#  -Wl,...:     tell GCC to pass this to linker.
++#    -Map:      create map file
++#    --cref:    add cross reference to map file
++LDFLAGS+=-nostartfiles -nostdlib -Wl,-Map=$(BOOT_NAME).map,--cref
++LDFLAGS+=-T $(BOOTSTRAP_PATH)/elf32-littlearm.lds -Ttext $(LINK_ADDR)
++OBJS=crt0_gnu.o
++
++endif
++
++OBJS+=\
++	$(BOARD).o \
++	main.o \
++	gpio.o \
++	pmc.o \
++	debug.o \
++	sdramc.o \
++	nandflash.o \
++	_udivsi3.o \
++	_umodsi3.o \
++	div0.o \
++	udiv.o \
++	string.o
++
++
++rebuild: clean all
++
++all: 	$(BOOT_NAME)
++
++ifeq ($(TOOLCHAIN), gcc)
++$(BOOT_NAME): $(OBJS)
++	$(LD) $(LDFLAGS) -n -o $(BOOT_NAME).elf $(OBJS)
++	$(OBJCOPY) --strip-debug --strip-unneeded $(BOOT_NAME).elf -O binary $(BOOT_NAME).bin
++endif
++
++
++$(BOARD).o: $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c -o $(BOARD).o
++
++main.o: $(BOOTSTRAP_PATH)/main.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/main.c -o main.o
++
++gpio.o: $(BOOTSTRAP_PATH)/driver/gpio.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/gpio.c -o gpio.o
++
++pmc.o:  $(BOOTSTRAP_PATH)/driver/pmc.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/pmc.c -o pmc.o
++
++debug.o: $(BOOTSTRAP_PATH)/driver/debug.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/debug.c -o debug.o
++
++sdramc.o:  $(BOOTSTRAP_PATH)/driver/sdramc.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/sdramc.c -o sdramc.o
++
++dataflash.o:  $(BOOTSTRAP_PATH)/driver/dataflash.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/dataflash.c -o dataflash.o
++
++nandflash.o:  $(BOOTSTRAP_PATH)/driver/nandflash.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/nandflash.c -o nandflash.o
++
++crt0_gnu.o:  $(BOOTSTRAP_PATH)/crt0_gnu.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/crt0_gnu.S -o crt0_gnu.o
++
++div0.o:  $(BOOTSTRAP_PATH)/lib/div0.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/div0.c -o div0.o
++
++string.o:  $(BOOTSTRAP_PATH)/lib/string.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/string.c -o string.o
++
++udiv.o:  $(BOOTSTRAP_PATH)/lib/udiv.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/udiv.c -o udiv.o
++
++_udivsi3.o:  $(BOOTSTRAP_PATH)/lib/_udivsi3.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_udivsi3.S -o _udivsi3.o
++
++_umodsi3.o:  $(BOOTSTRAP_PATH)/lib/_umodsi3.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_umodsi3.S -o _umodsi3.o
++
++clean:
++	$(ERASE_FCT) *.o *.bin *.elf *.map
+diff --git a/board/qil_a9260/nandflash/qil-a9260.h b/board/qil_a9260/nandflash/qil-a9260.h
+new file mode 100644
+index 0000000..c87002e
+--- /dev/null
++++ b/board/qil_a9260/nandflash/qil-a9260.h
+@@ -0,0 +1,109 @@
++/* ----------------------------------------------------------------------------
++ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
++ * ----------------------------------------------------------------------------
++ * Copyright (c) 2006, Atmel Corporation
++
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ *
++ * - Redistributions of source code must retain the above copyright notice,
++ * this list of conditions and the disclaimer below.
++ *
++ * Atmel's name may not be used to endorse or promote products derived from
++ * this software without specific prior written permission.
++ *
++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ----------------------------------------------------------------------------
++ * File Name           : qil-a9260.h
++ * Object              :
++ * Creation            : GH July 19th 2012
++ *-----------------------------------------------------------------------------
++ */
++#ifndef _QIL_A9260_H
++#define _QIL_A9260_H
++
++/* ******************************************************************* */
++/* PMC Settings                                                        */
++/*                                                                     */
++/* The main oscillator is enabled as soon as possible in the c_startup */
++/* and MCK is switched on the main oscillator.                         */
++/* PLL initialization is done later in the hw_init() function          */
++/* ******************************************************************* */
++#define MASTER_CLOCK		(180000000/2)
++#define PLL_LOCK_TIMEOUT	1000000
++
++#define PLLA_SETTINGS	0x20593F06
++#define PLLB_SETTINGS	0x10483F0E
++
++/* Switch MCK on PLLA output PCK = PLLA = 2 * MCK */
++#define MCKR_SETTINGS		(AT91C_PMC_PRES_CLK | AT91C_PMC_MDIV_2)
++#define MCKR_CSS_SETTINGS	(AT91C_PMC_CSS_PLLA_CLK | MCKR_SETTINGS)
++
++/* ******************************************************************* */
++/* NandFlash Settings                                                  */
++/*                                                                     */
++/* ******************************************************************* */
++#define AT91C_SMARTMEDIA_BASE	0x40000000
++
++#define AT91_SMART_MEDIA_ALE    (1 << 21)	/* our ALE is AD21 */
++#define AT91_SMART_MEDIA_CLE    (1 << 22)	/* our CLE is AD22 */
++
++#define NAND_DISABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_SODR = AT91C_PIO_PC14;} while(0)
++#define NAND_ENABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_CODR = AT91C_PIO_PC14;} while(0)
++
++#define NAND_WAIT_READY() while (!(*(volatile unsigned int *)AT91C_PIOC_PDSR & AT91C_PIO_PC13))
++
++
++/* ******************************************************************** */
++/* SMC Chip Select 3 Timings for NandFlash for MASTER_CLOCK = 90000000.*/
++/* Please refer to SMC section in AT91SAM datasheet to learn how 	*/
++/* to generate these values. 						*/
++/* ******************************************************************** */
++#define AT91C_SM_NWE_SETUP	(1 << 0)
++#define AT91C_SM_NCS_WR_SETUP	(0 << 8)
++#define AT91C_SM_NRD_SETUP	(1 << 16)
++#define AT91C_SM_NCS_RD_SETUP	(0 << 24)
++  
++#define AT91C_SM_NWE_PULSE 	(3 << 0)
++#define AT91C_SM_NCS_WR_PULSE	(3 << 8)
++#define AT91C_SM_NRD_PULSE	(3 << 16)
++#define AT91C_SM_NCS_RD_PULSE	(3 << 24)
++  
++#define AT91C_SM_NWE_CYCLE 	(5 << 0)
++#define AT91C_SM_NRD_CYCLE	(5 << 16)
++#define AT91C_SM_TDF	        (2 << 16)
++
++/* ******************************************************************* */
++/* BootStrap Settings                                                  */
++/*                                                                     */
++/* ******************************************************************* */
++#define IMG_ADDRESS 		0x20000		/* Image Address in NandFlash */
++#define	IMG_SIZE		0x40000		/* Image Size in NandFlash    */
++
++#define MACH_TYPE       	0x6AF		/* QIL-A9260 */
++#define JUMP_ADDR		0x23F00000	/* Final Jump Address 	      */
++
++/* ******************************************************************* */
++/* Application Settings                                                */
++/* ******************************************************************* */
++#undef CFG_DEBUG
++#undef CFG_DATAFLASH
++
++#define CFG_NANDFLASH
++#undef	NANDFLASH_SMALL_BLOCKS	/* NANDFLASH_LARGE_BLOCKS used instead */
++
++#define CFG_HW_INIT
++#define CFG_SDRAM
++
++#endif	/* _QIL_A9260_H */
+diff --git a/board/qil_a9260/qil_a9260.c b/board/qil_a9260/qil_a9260.c
+new file mode 100644
+index 0000000..ae122e7
+--- /dev/null
++++ b/board/qil_a9260/qil_a9260.c
+@@ -0,0 +1,298 @@
++/* ----------------------------------------------------------------------------
++ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
++ * ----------------------------------------------------------------------------
++ * Copyright (c) 2006, Atmel Corporation
++
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ *
++ * - Redistributions of source code must retain the above copyright notice,
++ * this list of conditions and the disclaiimer below.
++ *
++ * Atmel's name may not be used to endorse or promote products derived from
++ * this software without specific prior written permission.
++ *
++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ----------------------------------------------------------------------------
++ * File Name           : qil_a9260.c
++ * Object              :
++ * Creation            : GH July 19th 2012
++ *-----------------------------------------------------------------------------
++ */
++#include "../../include/part.h"
++#include "../../include/gpio.h"
++#include "../../include/pmc.h"
++#include "../../include/debug.h"
++#include "../../include/sdramc.h"
++#include "../../include/main.h"
++#ifdef CFG_NANDFLASH
++#include "../../include/nandflash.h"
++#endif
++#ifdef CFG_DATAFLASH
++#include "../../include/dataflash.h"
++#endif
++
++static inline unsigned int get_cp15(void)
++{
++	unsigned int value;
++	__asm__("mrc p15, 0, %0, c1, c0, 0" : "=r" (value));
++	return value;
++}
++
++static inline void set_cp15(unsigned int value)
++{
++	__asm__("mcr p15, 0, %0, c1, c0, 0" : : "r" (value));
++}
++
++#ifdef CFG_HW_INIT
++/*----------------------------------------------------------------------------*/
++/* \fn    hw_init							      */
++/* \brief This function performs very low level HW initialization	      */
++/* This function is invoked as soon as possible during the c_startup	      */
++/* The bss segment must be initialized					      */
++/*----------------------------------------------------------------------------*/
++void hw_init(void)
++{
++	unsigned int cp15;
++	
++	/* Configure PIOs */
++	const struct pio_desc hw_pio[] = {
++#ifdef CFG_DEBUG
++		{"RXD", AT91C_PIN_PB(14), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"TXD", AT91C_PIN_PB(15), 0, PIO_DEFAULT, PIO_PERIPH_A},
++#endif
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Disable watchdog */
++	writel(AT91C_WDTC_WDDIS, AT91C_BASE_WDTC + WDTC_WDMR);
++
++	/* At this stage the main oscillator is supposed to be enabled
++	 * PCK = MCK = MOSC */
++
++	/* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */
++	pmc_cfg_plla(PLLA_SETTINGS, PLL_LOCK_TIMEOUT);
++
++	/* PCK = PLLA = 2 * MCK */
++	pmc_cfg_mck(MCKR_SETTINGS, PLL_LOCK_TIMEOUT);
++	/* Switch MCK on PLLA output */
++	pmc_cfg_mck(MCKR_CSS_SETTINGS, PLL_LOCK_TIMEOUT);
++
++	/* Configure PLLB */
++	pmc_cfg_pllb(PLLB_SETTINGS, PLL_LOCK_TIMEOUT);
++
++	/* Configure CP15 */
++	cp15 = get_cp15();
++	cp15 |= I_CACHE;
++	set_cp15(cp15);
++
++	/* Configure the PIO controller */
++	pio_setup(hw_pio);
++
++	/* Configure the EBI Slave Slot Cycle to 64 */
++	writel( (readl((AT91C_BASE_MATRIX + MATRIX_SCFG3)) & ~0xFF) | 0x40, (AT91C_BASE_MATRIX + MATRIX_SCFG3));
++
++#ifdef CFG_DEBUG
++	/* Enable Debug messages on the DBGU */
++	dbg_init(BAUDRATE(MASTER_CLOCK, 115200));
++
++	dbg_print("Start AT91Bootstrap...\n\r");
++#endif /* CFG_DEBUG */
++
++#ifdef CFG_SDRAM
++	/* Initialize the matrix */
++	writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) | AT91C_EBI_CS1A_SDRAMC, AT91C_BASE_CCFG + CCFG_EBICSA);
++
++	/* Configure SDRAM Controller */
++	sdram_init(	AT91C_SDRAMC_NC_9  |
++				AT91C_SDRAMC_NR_13 |
++				AT91C_SDRAMC_CAS_2 |
++				AT91C_SDRAMC_NB_4_BANKS |
++				AT91C_SDRAMC_DBW_32_BITS |
++				AT91C_SDRAMC_TWR_2 |
++				AT91C_SDRAMC_TRC_7 |
++				AT91C_SDRAMC_TRP_2 |
++				AT91C_SDRAMC_TRCD_2 |
++				AT91C_SDRAMC_TRAS_5 |
++				AT91C_SDRAMC_TXSR_8,		/* Control Register */
++				(MASTER_CLOCK * 7)/1000000,	/* Refresh Timer Register */
++				AT91C_SDRAMC_MD_SDRAM);		/* SDRAM (no low power)   */ 
++
++
++#endif /* CFG_SDRAM */
++}
++#endif /* CFG_HW_INIT */
++
++#ifdef CFG_SDRAM
++/*------------------------------------------------------------------------------*/
++/* \fn    sdramc_hw_init							*/
++/* \brief This function performs SDRAMC HW initialization			*/
++/*------------------------------------------------------------------------------*/
++void sdramc_hw_init(void)
++{
++	/* Configure PIOs */
++/*	const struct pio_desc sdramc_pio[] = {
++		{"D16", AT91C_PIN_PC(16), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D17", AT91C_PIN_PC(17), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D18", AT91C_PIN_PC(18), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D19", AT91C_PIN_PC(19), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D20", AT91C_PIN_PC(20), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D21", AT91C_PIN_PC(21), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D22", AT91C_PIN_PC(22), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D23", AT91C_PIN_PC(23), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D24", AT91C_PIN_PC(24), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D25", AT91C_PIN_PC(25), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D26", AT91C_PIN_PC(26), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D27", AT91C_PIN_PC(27), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D28", AT91C_PIN_PC(28), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D29", AT91C_PIN_PC(29), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D30", AT91C_PIN_PC(30), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D31", AT91C_PIN_PC(31), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++*/
++	/* Configure the SDRAMC PIO controller to output PCK0 */
++/*	pio_setup(sdramc_pio); */
++
++	writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_ASR(0));
++	writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_PDR(0));
++
++}
++#endif /* CFG_SDRAM */
++
++#ifdef CFG_DATAFLASH
++
++/*------------------------------------------------------------------------------*/
++/* \fn    df_recovery								*/
++/* \brief This function erases DataFlash Page 0 if USR PB is pressed 		*/
++/*        during boot sequence							*/
++/*------------------------------------------------------------------------------*/
++void df_recovery(AT91PS_DF pDf)
++{
++#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS0_DATAFLASH)
++	/* Configure PIOs */
++	const struct pio_desc usrpb_pio[] = {
++		{"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the PIO controller */
++	writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
++	pio_setup(usrpb_pio);
++	
++	/* If USR PB is pressed during Boot sequence */
++	/* Erase DataFlash Page 0*/
++	if ( !pio_get_value(AT91C_PIN_PB(10)) )
++		df_page_erase(pDf, 0);
++#endif
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    df_hw_init								*/
++/* \brief This function performs DataFlash HW initialization			*/
++/*------------------------------------------------------------------------------*/
++void df_hw_init(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc df_pio[] = {
++		{"MISO",  AT91C_PIN_PA(0), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"MOSI",  AT91C_PIN_PA(1), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"SPCK",  AT91C_PIN_PA(2), 0, PIO_DEFAULT, PIO_PERIPH_A},
++#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS0_DATAFLASH)
++		{"NPCS0", AT91C_PIN_PA(3), 0, PIO_DEFAULT, PIO_PERIPH_A},
++#endif
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the PIO controller */
++	pio_setup(df_pio);
++}
++#endif /* CFG_DATAFLASH */
++
++
++
++#ifdef CFG_NANDFLASH
++/*------------------------------------------------------------------------------*/
++/* \fn    nand_recovery						*/
++/* \brief This function erases NandFlash Block 0 if USR PB is pressed 		*/
++/*        during boot sequence							*/
++/*------------------------------------------------------------------------------*/
++static void nand_recovery(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc usrpb_pio[] = {
++		{"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the PIO controller */
++	writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
++	pio_setup(usrpb_pio);
++	
++	/* If USR PB is pressed during Boot sequence */
++	/* Erase NandFlash block 0*/
++	if (!pio_get_value(AT91C_PIN_PB(10)) )
++		AT91F_NandEraseBlock0();
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_hw_init							*/
++/* \brief NandFlash HW init							*/
++/*------------------------------------------------------------------------------*/
++void nandflash_hw_init(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc nand_pio[] = {
++		{"RDY_BSY", AT91C_PIN_PC(13), 0, PIO_PULLUP, PIO_INPUT},
++		{"NANDCS",  AT91C_PIN_PC(14), 0, PIO_PULLUP, PIO_OUTPUT},
++		{(char *) 0, 0, 0,  PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Setup Smart Media, first enable the address range of CS3 in HMATRIX user interface */
++	writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) | AT91C_EBI_CS3A_SM, AT91C_BASE_CCFG + CCFG_EBICSA);
++		    
++	/* Configure SMC CS3 */
++ 	writel((AT91C_SM_NWE_SETUP | AT91C_SM_NCS_WR_SETUP | AT91C_SM_NRD_SETUP | AT91C_SM_NCS_RD_SETUP), AT91C_BASE_SMC + SMC_SETUP3);
++  	writel((AT91C_SM_NWE_PULSE | AT91C_SM_NCS_WR_PULSE | AT91C_SM_NRD_PULSE | AT91C_SM_NCS_RD_PULSE), AT91C_BASE_SMC + SMC_PULSE3);
++	writel((AT91C_SM_NWE_CYCLE | AT91C_SM_NRD_CYCLE)						, AT91C_BASE_SMC + SMC_CYCLE3);
++	writel((AT91C_SMC_READMODE | AT91C_SMC_WRITEMODE | AT91C_SMC_NWAITM_NWAIT_DISABLE | 
++  		AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS | AT91C_SM_TDF)						, AT91C_BASE_SMC + SMC_CTRL3);
++
++	/* Configure the PIO controller */
++	writel((1 << AT91C_ID_PIOC), PMC_PCER + AT91C_BASE_PMC);
++	pio_setup(nand_pio);
++	
++	nand_recovery();
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_cfg_16bits_dbw_init						*/
++/* \brief Configure SMC in 16 bits mode						*/
++/*------------------------------------------------------------------------------*/
++void nandflash_cfg_16bits_dbw_init(void)
++{
++	writel(readl(AT91C_BASE_SMC + SMC_CTRL3) | AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS, AT91C_BASE_SMC + SMC_CTRL3);
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_cfg_8bits_dbw_init						*/
++/* \brief Configure SMC in 8 bits mode						*/
++/*------------------------------------------------------------------------------*/
++void nandflash_cfg_8bits_dbw_init(void)
++{
++	writel((readl(AT91C_BASE_SMC + SMC_CTRL3) & ~(AT91C_SMC_DBW)) | AT91C_SMC_DBW_WIDTH_EIGTH_BITS, AT91C_BASE_SMC + SMC_CTRL3);
++}
++
++
++#endif /* #ifdef CFG_NANDFLASH */
+diff --git a/crt0_gnu.S b/crt0_gnu.S
+index 042b617..002feef 100644
+--- a/crt0_gnu.S
++++ b/crt0_gnu.S
+@@ -106,6 +106,13 @@ _relocate_to_sram:
+ #endif /* CFG_NORFLASH */
+ 
+ _setup_clocks:
++/* Test if main osc is bypassed */
++	ldr 	r0,=AT91C_PMC_MOR
++	ldr 	r1, [r0]
++	ldr 	r2,=AT91C_CKGR_OSCBYPASS 
++	ands 	r1, r1, r2
++	bne	_init_data	/* branch if OSCBYPASS=1 */
++
+ /* Test if main oscillator is enabled */
+ 	ldr 	r0,=AT91C_PMC_SR
+ 	ldr 	r1, [r0]
+diff --git a/include/part.h b/include/part.h
+index ba5985a..bbd33fe 100644
+--- a/include/part.h
++++ b/include/part.h
+@@ -35,7 +35,11 @@
+ 
+ #ifdef AT91SAM9260
+ #include "AT91SAM9260_inc.h"
+-#include "at91sam9260ek.h"
++	#ifdef at91sam9260ek
++	#include "at91sam9260ek.h"
++	#elif qil_a9260
++	#include "qil-a9260.h"
++	#endif
+ #endif
+ 
+ #ifdef AT91SAM9XE
+-- 
+1.5.6.3
+

board/calao/qil-a9260/barebox-2012.07.0-qil-a9260.patch

@@ -0,0 +1,36 @@
+From d076aa6182dc6df6bb311e60bbddb03573b9483b Mon Sep 17 00:00:00 2001
+From: Gregory Hermant <gregory.hermant@calao-systems.com>
+Date: Fri, 3 Aug 2012 11:25:49 +0200
+Subject: [PATCH] Enable pull-up on Rx serial ports for the CALAO MB-QIL-A9260
+
+
+Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
+---
+ arch/arm/boards/qil-a9260/init.c |    6 ++++++
+ 1 files changed, 6 insertions(+), 0 deletions(-)
+
+diff --git a/arch/arm/boards/qil-a9260/init.c b/arch/arm/boards/qil-a9260/init.c
+index 305d733..b43cace 100644
+--- a/arch/arm/boards/qil-a9260/init.c
++++ b/arch/arm/boards/qil-a9260/init.c
+@@ -196,11 +196,17 @@ device_initcall(qil_a9260_devices_init);
+ static int qil_a9260_console_init(void)
+ {
+ 	at91_register_uart(0, 0);
++	at91_set_A_periph(AT91_PIN_PB14, 1);    /* Enable pull-up on DRXD */
++
+ 	at91_register_uart(1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ 			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ 			   | ATMEL_UART_RI);
++
+ 	at91_register_uart(2, ATMEL_UART_CTS | ATMEL_UART_RTS);
++	at91_set_A_periph(AT91_PIN_PB7, 1);	/* Enable pull-up on RXD1 */
++
+ 	at91_register_uart(3, ATMEL_UART_CTS | ATMEL_UART_RTS);
++	at91_set_A_periph(AT91_PIN_PB9, 1);	/* Enable pull-up on RXD2 */
+ 
+ 	return 0;
+ }
+-- 
+1.5.6.3
+

board/calao/qil-a9260/linux-3.4.7.config

@@ -0,0 +1,111 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_AT91=y
+CONFIG_ARCH_AT91SAM9260=y
+CONFIG_MACH_QIL_A9260=y
+CONFIG_AT91_SLOW_CLOCK=y
+CONFIG_AT91_EARLY_USART0=y
+# CONFIG_ARM_THUMB is not set
+CONFIG_AEABI=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS1,115200"
+CONFIG_FPE_NWFPE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_SPI=y
+CONFIG_SPI_ATMEL=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+# CONFIG_USB_HID is not set
+CONFIG_USB=y
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_MON=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=m
+CONFIG_MMC=y
+CONFIG_MMC_AT91=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_M41T94=y
+CONFIG_EXT2_FS=y
+CONFIG_FUSE_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_XATTR=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_LL=y

board/calao/qil-a9260/linux-3.4.7.patch

@@ -0,0 +1,27 @@
+From fe6432a9728b62bce3db73c5a4efe026018fd495 Mon Sep 17 00:00:00 2001
+From: Gregory Hermant <gregory.hermant@calao-systems.com>
+Date: Fri, 3 Aug 2012 16:45:37 +0200
+Subject: [PATCH] QIL-A9260: rtc modalias m41t48 renamed to rtc-m41t48
+
+
+Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
+---
+ arch/arm/mach-at91/board-qil-a9260.c |    2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
+index bf351e2..c0df05c 100644
+--- a/arch/arm/mach-at91/board-qil-a9260.c
++++ b/arch/arm/mach-at91/board-qil-a9260.c
+@@ -78,7 +78,7 @@ static struct at91_udc_data __initdata ek_udc_data = {
+ static struct spi_board_info ek_spi_devices[] = {
+ #if defined(CONFIG_RTC_DRV_M41T94)
+ 	{	/* M41T94 RTC */
+-		.modalias	= "m41t94",
++		.modalias	= "rtc-m41t94",
+ 		.chip_select	= 0,
+ 		.max_speed_hz	= 1 * 1000 * 1000,
+ 		.bus_num	= 0,
+-- 
+1.5.6.3
+

board/calao/snowball/linux-3.4.patch

@@ -0,0 +1,45 @@
+From 3d1a9b44b9dcd2c0f5d54c09596c96c0524d8340 Mon Sep 17 00:00:00 2001
+From: Gregory Hermant <gregory.hermant@calao-systems.com>
+Date: Tue, 13 Nov 2012 11:47:41 +0100
+Subject: [PATCH] trace-debug[stm]: Fix for BT/WLAN instability
+
+Pins under mop500_ske_pins array are used for different
+functionalities in snowball. Ex: GPIO161 pin configured
+for keypad here must stay configured as GPIO alternate
+function for operating PMU_EN pin of BT/WLAN chip in snowball.
+So forbid configuring these pins, for snowball
+
+Signed-off-by: Rajanikanth H.V <rajanikanth.hv@stericsson.com>
+Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
+---
+ arch/arm/mach-ux500/board-mop500-stm.c |    7 +++++--
+ 1 file changed, 5 insertions(+), 2 deletions(-)
+
+diff --git a/arch/arm/mach-ux500/board-mop500-stm.c b/arch/arm/mach-ux500/board-mop500-stm.c
+index 1bef2a0..532fb9e 100644
+--- a/arch/arm/mach-ux500/board-mop500-stm.c
++++ b/arch/arm/mach-ux500/board-mop500-stm.c
+@@ -121,7 +121,9 @@ static int stm_ste_disable_ape_on_mipi60(void)
+ 	if (retval)
+ 		STM_ERR("Failed to disable MIPI60\n");
+ 	else {
+-		retval = nmk_config_pins(ARRAY_AND_SIZE(mop500_ske_pins));
++		if (!machine_is_snowball())
++			retval = nmk_config_pins(
++				ARRAY_AND_SIZE(mop500_ske_pins));
+ 		if (retval)
+ 			STM_ERR("Failed to enable SKE gpio\n");
+ 	}
+@@ -314,7 +316,8 @@ static int stm_ste_connection(enum stm_connection_type con_type)
+ 		/* Enable altC3 on GPIO70-74 (STMMOD) and GPIO75-76 (UARTMOD) */
+ 		prcmu_enable_stm_mod_uart();
+ 		/* Enable APE on MIPI60 */
+-		retval = nmk_config_pins_sleep(ARRAY_AND_SIZE(mop500_ske_pins));
++		if (!machine_is_snowball())
++			retval = nmk_config_pins_sleep(ARRAY_AND_SIZE(mop500_ske_pins));
+ 		if (retval)
+ 			STM_ERR("Failed to disable SKE GPIO\n");
+ 		else {
+-- 
+1.7.9.5
+

board/calao/tny-a9g20-lpw/at91bootstrap-1.16-tny-a9g20-lpw.patch

@@ -0,0 +1,551 @@
+From 53bd82b122f4530a98cba45795832820bb1d0b45 Mon Sep 17 00:00:00 2001
+From: Gregory Hermant <gregory.hermant@calao-systems.com>
+Date: Mon, 13 Aug 2012 11:26:10 +0200
+Subject: [PATCH] Add support for the Calao-systems TNY-A9G20-LPW
+
+
+Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
+---
+ board/tny_a9g20_lpw/nandflash/Makefile        |  121 ++++++++++++
+ board/tny_a9g20_lpw/nandflash/tny-a9g20-lpw.h |  114 ++++++++++++
+ board/tny_a9g20_lpw/tny_a9g20_lpw.c           |  243 +++++++++++++++++++++++++
+ crt0_gnu.S                                    |    6 +
+ include/part.h                                |    6 +-
+ 5 files changed, 489 insertions(+), 1 deletion(-)
+ create mode 100644 board/tny_a9g20_lpw/nandflash/Makefile
+ create mode 100644 board/tny_a9g20_lpw/nandflash/tny-a9g20-lpw.h
+ create mode 100644 board/tny_a9g20_lpw/tny_a9g20_lpw.c
+
+diff --git a/board/tny_a9g20_lpw/nandflash/Makefile b/board/tny_a9g20_lpw/nandflash/Makefile
+new file mode 100644
+index 0000000..7efbea7
+--- /dev/null
++++ b/board/tny_a9g20_lpw/nandflash/Makefile
+@@ -0,0 +1,121 @@
++# TODO: set this appropriately for your local toolchain
++ifndef ERASE_FCT
++ERASE_FCT=rm -f
++endif
++ifndef CROSS_COMPILE
++CROSS_COMPILE=arm-elf-
++endif
++
++TOOLCHAIN=gcc
++
++BOOTSTRAP_PATH=../../..
++
++# NandFlashBoot Configuration for AT91SAM9260EK
++
++# Target name (case sensitive!!!)
++TARGET=AT91SAM9G20
++# Board name (case sensitive!!!)
++BOARD=tny_a9g20_lpw
++# Link Address and Top_of_Memory
++LINK_ADDR=0x200000
++TOP_OF_MEMORY=0x301000
++# Name of current directory
++PROJECT=nandflash
++
++ifndef BOOT_NAME
++BOOT_NAME=$(PROJECT)_$(BOARD)
++endif
++
++INCL=./$(BOOTSTRAP_PATH)/board/$(BOARD)/$(PROJECT)
++
++ifeq ($(TOOLCHAIN), gcc)
++
++AS=$(CROSS_COMPILE)gcc
++CC=$(CROSS_COMPILE)gcc
++LD=$(CROSS_COMPILE)gcc
++NM= $(CROSS_COMPILE)nm
++SIZE=$(CROSS_COMPILE)size
++OBJCOPY=$(CROSS_COMPILE)objcopy
++OBJDUMP=$(CROSS_COMPILE)objdump
++CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL)
++ASFLAGS=-g -mcpu=arm926ej-s -c -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
++
++# Linker flags.
++#  -Wl,...:     tell GCC to pass this to linker.
++#    -Map:      create map file
++#    --cref:    add cross reference to map file
++LDFLAGS+=-nostartfiles -nostdlib -Wl,-Map=$(BOOT_NAME).map,--cref
++LDFLAGS+=-T $(BOOTSTRAP_PATH)/elf32-littlearm.lds -Ttext $(LINK_ADDR)
++OBJS=crt0_gnu.o
++
++endif
++
++OBJS+=\
++	$(BOARD).o \
++	main.o \
++	gpio.o \
++	pmc.o \
++	debug.o \
++	sdramc.o \
++	nandflash.o \
++	_udivsi3.o \
++	_umodsi3.o \
++	div0.o \
++	udiv.o \
++	string.o
++
++rebuild: clean all
++
++all: 	$(BOOT_NAME)
++
++ifeq ($(TOOLCHAIN), gcc)
++$(BOOT_NAME): $(OBJS)
++	$(LD) $(LDFLAGS) -n -o $(BOOT_NAME).elf $(OBJS)
++	$(OBJCOPY) --strip-debug --strip-unneeded $(BOOT_NAME).elf -O binary $(BOOT_NAME).bin
++endif
++
++
++$(BOARD).o: $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c -o $(BOARD).o
++
++main.o: $(BOOTSTRAP_PATH)/main.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/main.c -o main.o
++
++gpio.o: $(BOOTSTRAP_PATH)/driver/gpio.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/gpio.c -o gpio.o
++
++pmc.o:  $(BOOTSTRAP_PATH)/driver/pmc.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/pmc.c -o pmc.o
++
++debug.o: $(BOOTSTRAP_PATH)/driver/debug.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/debug.c -o debug.o
++
++sdramc.o:  $(BOOTSTRAP_PATH)/driver/sdramc.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/sdramc.c -o sdramc.o
++
++dataflash.o:  $(BOOTSTRAP_PATH)/driver/dataflash.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/dataflash.c -o dataflash.o
++
++nandflash.o:  $(BOOTSTRAP_PATH)/driver/nandflash.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/nandflash.c -o nandflash.o
++
++crt0_gnu.o:  $(BOOTSTRAP_PATH)/crt0_gnu.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/crt0_gnu.S -o crt0_gnu.o
++
++div0.o:  $(BOOTSTRAP_PATH)/lib/div0.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/div0.c -o div0.o
++
++string.o:  $(BOOTSTRAP_PATH)/lib/string.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/string.c -o string.o
++
++udiv.o:  $(BOOTSTRAP_PATH)/lib/udiv.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/udiv.c -o udiv.o
++
++_udivsi3.o:  $(BOOTSTRAP_PATH)/lib/_udivsi3.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_udivsi3.S -o _udivsi3.o
++
++_umodsi3.o:  $(BOOTSTRAP_PATH)/lib/_umodsi3.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_umodsi3.S -o _umodsi3.o
++
++clean:
++	$(ERASE_FCT) *.o *.bin *.elf *.map
+diff --git a/board/tny_a9g20_lpw/nandflash/tny-a9g20-lpw.h b/board/tny_a9g20_lpw/nandflash/tny-a9g20-lpw.h
+new file mode 100644
+index 0000000..b1f8a1d
+--- /dev/null
++++ b/board/tny_a9g20_lpw/nandflash/tny-a9g20-lpw.h
+@@ -0,0 +1,114 @@
++/* ----------------------------------------------------------------------------
++ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
++ * ----------------------------------------------------------------------------
++ * Copyright (c) 2008, Atmel Corporation
++
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ *
++ * - Redistributions of source code must retain the above copyright notice,
++ * this list of conditions and the disclaimer below.
++ *
++ * Atmel's name may not be used to endorse or promote products derived from
++ * this software without specific prior written permission.
++ *
++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ----------------------------------------------------------------------------
++ * File Name           : tny-a9g20-lpw.h
++ * Object              :
++ * Creation            : GH August 13th 2012
++ *-----------------------------------------------------------------------------
++ */
++#ifndef _TNY_A9G20_LPW_H
++#define _TNY_A9G20_LPW_H
++
++/* ******************************************************************* */
++/* PMC Settings                                                        */
++/*                                                                     */
++/* The main oscillator is enabled as soon as possible in the c_startup */
++/* and MCK is switched on the main oscillator.                         */
++/* PLL initialization is done later in the hw_init() function          */
++/* ******************************************************************* */
++#define MASTER_CLOCK		(100000000)
++#define PLL_LOCK_TIMEOUT	1000000
++
++/* set PLLA to 800Mhz from MAINCK= 12Mhz MULA=199 (0xC7+1= 200), DIVA=0x03 (Fplla=12Mhz x [(199+1)/3]=800Mhz) */
++#define PLLA_SETTINGS   0x20C73F03
++#define PLLB_SETTINGS   0x100F3F02
++
++/* Switch MCK on PLLA output PCK = PLLA/2 = 3 * MCK */
++/* LP-SDRAM (fmax=100Mhz) PDIV=0 => PRESCALER CLK=PCLK; */
++/* MDIV = 2 => PRESCALER CLK / 4 = MCLK=100Mhz */
++/* PRESCALER CLK = PLLA (800Mhz) / 2 (PRES=1) = 400Mhz */
++#define MCKR_SETTINGS           0x0204 
++#define MCKR_CSS_SETTINGS       (AT91C_PMC_CSS_PLLA_CLK | MCKR_SETTINGS)
++
++/* ******************************************************************* */
++/* NandFlash Settings                                                  */
++/*                                                                     */
++/* ******************************************************************* */
++#define AT91C_SMARTMEDIA_BASE	0x40000000
++
++#define AT91_SMART_MEDIA_ALE    (1 << 21)	/* our ALE is AD21 */
++#define AT91_SMART_MEDIA_CLE    (1 << 22)	/* our CLE is AD22 */
++
++#define NAND_DISABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_SODR = AT91C_PIO_PC14;} while(0)
++#define NAND_ENABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_CODR = AT91C_PIO_PC14;} while(0)
++
++#define NAND_WAIT_READY() while (!(*(volatile unsigned int *)AT91C_PIOC_PDSR & AT91C_PIO_PC13))
++
++
++/* ******************************************************************** */
++/* SMC Chip Select 3 Timings for NandFlash for MASTER_CLOCK = 100000000.*/
++/* Please refer to SMC section in AT91SAM9 datasheet to learn how 	*/
++/* to generate these values. 						*/
++/* ******************************************************************** */
++#define AT91C_SM_NWE_SETUP	(1 << 0)
++#define AT91C_SM_NCS_WR_SETUP	(0 << 8)
++#define AT91C_SM_NRD_SETUP	(1 << 16)
++#define AT91C_SM_NCS_RD_SETUP	(0 << 24)
++  
++#define AT91C_SM_NWE_PULSE 	(3 << 0)
++#define AT91C_SM_NCS_WR_PULSE	(3 << 8)
++#define AT91C_SM_NRD_PULSE	(3 << 16)
++#define AT91C_SM_NCS_RD_PULSE	(3 << 24)
++  
++#define AT91C_SM_NWE_CYCLE 	(5 << 0)
++#define AT91C_SM_NRD_CYCLE	(5 << 16)
++
++#define AT91C_SM_TDF	        (2 << 16)
++
++/* ******************************************************************* */
++/* BootStrap Settings                                                  */
++/*                                                                     */
++/* ******************************************************************* */
++#define IMG_ADDRESS 		0x20000			/* Image Address in NandFlash */
++#define	IMG_SIZE		0x40000			/* Image Size in NandFlash */
++
++#define MACH_TYPE		0x80B			/* TNY-A9G20 */
++#define JUMP_ADDR		0x23F00000		/* Final Jump Address */
++
++/* ******************************************************************* */
++/* Application Settings                                                */
++/* ******************************************************************* */
++#undef CFG_DEBUG
++#undef CFG_DATAFLASH
++
++#define CFG_NANDFLASH
++#undef	NANDFLASH_SMALL_BLOCKS	/* NANDFLASH_LARGE_BLOCKS used instead */
++
++#define	CFG_SDRAM
++#define	CFG_HW_INIT
++
++#endif	/* _TNY_A9G20_LPW_H */
+diff --git a/board/tny_a9g20_lpw/tny_a9g20_lpw.c b/board/tny_a9g20_lpw/tny_a9g20_lpw.c
+new file mode 100644
+index 0000000..cef9055
+--- /dev/null
++++ b/board/tny_a9g20_lpw/tny_a9g20_lpw.c
+@@ -0,0 +1,243 @@
++/* ----------------------------------------------------------------------------
++ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
++ * ----------------------------------------------------------------------------
++ * Copyright (c) 2008, Atmel Corporation
++
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ *
++ * - Redistributions of source code must retain the above copyright notice,
++ * this list of conditions and the disclaimer below.
++ *
++ * Atmel's name may not be used to endorse or promote products derived from
++ * this software without specific prior written permission.
++ *
++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ----------------------------------------------------------------------------
++ * File Name           : tny_a9g20_lpw.c
++ * Object              :
++ * Creation            : GH August 13th 2012
++ *-----------------------------------------------------------------------------
++ */
++#include "../../include/part.h"
++#include "../../include/gpio.h"
++#include "../../include/pmc.h"
++#include "../../include/debug.h"
++#include "../../include/sdramc.h"
++#include "../../include/main.h"
++#ifdef CFG_NANDFLASH
++#include "../../include/nandflash.h"
++#endif
++
++static inline unsigned int get_cp15(void)
++{
++	unsigned int value;
++	__asm__("mrc p15, 0, %0, c1, c0, 0" : "=r" (value));
++	return value;
++}
++
++static inline void set_cp15(unsigned int value)
++{
++	__asm__("mcr p15, 0, %0, c1, c0, 0" : : "r" (value));
++}
++
++#ifdef CFG_HW_INIT
++/*----------------------------------------------------------------------------*/
++/* \fn    hw_init							      */
++/* \brief This function performs very low level HW initialization	      */
++/* This function is invoked as soon as possible during the c_startup	      */
++/* The bss segment must be initialized					      */
++/*----------------------------------------------------------------------------*/
++void hw_init(void)
++{
++	unsigned int cp15;
++	
++	/* Configure PIOs */
++	const struct pio_desc hw_pio[] = {
++#ifdef CFG_DEBUG
++		{"RXD", AT91C_PIN_PB(14), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"TXD", AT91C_PIN_PB(15), 0, PIO_DEFAULT, PIO_PERIPH_A},
++#endif
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Disable watchdog */
++	writel(AT91C_WDTC_WDDIS, AT91C_BASE_WDTC + WDTC_WDMR);
++
++	/* At this stage the main oscillator is supposed to be enabled
++	 * PCK = MCK = MOSC */
++	writel(0x00, AT91C_BASE_PMC + PMC_PLLICPR);
++
++	/* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */
++	pmc_cfg_plla(PLLA_SETTINGS, PLL_LOCK_TIMEOUT);
++
++	/* PCK = PLLA/2 = 3 * MCK */
++	pmc_cfg_mck(MCKR_SETTINGS, PLL_LOCK_TIMEOUT);
++	/* Switch MCK on PLLA output */
++	pmc_cfg_mck(MCKR_CSS_SETTINGS, PLL_LOCK_TIMEOUT);
++
++	/* Configure PLLB */
++	pmc_cfg_pllb(PLLB_SETTINGS, PLL_LOCK_TIMEOUT);
++
++	/* Configure CP15 */
++	cp15 = get_cp15();
++	cp15 |= I_CACHE;
++	set_cp15(cp15);
++
++	/* Configure the PIO controller */
++	pio_setup(hw_pio);
++
++	/* Configure the EBI Slave Slot Cycle to 64 */
++	writel((readl((AT91C_BASE_MATRIX + MATRIX_SCFG3)) & ~0xFF) | 0x40, (AT91C_BASE_MATRIX + MATRIX_SCFG3));
++
++#ifdef CFG_DEBUG
++	/* Enable Debug messages on the DBGU */
++	dbg_init(BAUDRATE(MASTER_CLOCK, 115200));
++
++	dbg_print("Start AT91Bootstrap...\n\r");
++#endif /* CFG_DEBUG */
++
++#ifdef CFG_SDRAM
++	/* Initialize the matrix (slow slew rate enabled and LPSDRAM memory voltage = 1.8V) */
++	writel(((readl(AT91C_BASE_CCFG + CCFG_EBICSA)) | AT91C_EBI_CS1A_SDRAMC | (1<<17)) & ~0x00010000, AT91C_BASE_CCFG + CCFG_EBICSA);
++
++	/* Configure SDRAM Controller */
++	sdram_init(	AT91C_SDRAMC_NC_9  |
++				AT91C_SDRAMC_NR_13 |
++				AT91C_SDRAMC_CAS_3 |
++				AT91C_SDRAMC_NB_4_BANKS |
++				AT91C_SDRAMC_DBW_32_BITS |
++				AT91C_SDRAMC_TWR_2 |
++				AT91C_SDRAMC_TRC_7 |
++				AT91C_SDRAMC_TRP_2 |
++				AT91C_SDRAMC_TRCD_2 |
++				AT91C_SDRAMC_TRAS_5 |
++				AT91C_SDRAMC_TXSR_8,		/* Control Register */
++				(MASTER_CLOCK * 7)/1000000,	/* Refresh Timer Register */
++                                AT91C_SDRAMC_MD_LOW_POWER_SDRAM); /* SDRAM (low power)   */
++
++#endif /* CFG_SDRAM */
++}
++#endif /* CFG_HW_INIT */
++
++#ifdef CFG_SDRAM
++/*------------------------------------------------------------------------------*/
++/* \fn    sdramc_hw_init							*/
++/* \brief This function performs SDRAMC HW initialization			*/
++/*------------------------------------------------------------------------------*/
++void sdramc_hw_init(void)
++{
++	/* Configure PIOs */
++/*	const struct pio_desc sdramc_pio[] = {
++		{"D16", AT91C_PIN_PC(16), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D17", AT91C_PIN_PC(17), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D18", AT91C_PIN_PC(18), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D19", AT91C_PIN_PC(19), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D20", AT91C_PIN_PC(20), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D21", AT91C_PIN_PC(21), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D22", AT91C_PIN_PC(22), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D23", AT91C_PIN_PC(23), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D24", AT91C_PIN_PC(24), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D25", AT91C_PIN_PC(25), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D26", AT91C_PIN_PC(26), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D27", AT91C_PIN_PC(27), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D28", AT91C_PIN_PC(28), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D29", AT91C_PIN_PC(29), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D30", AT91C_PIN_PC(30), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D31", AT91C_PIN_PC(31), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++*/
++	/* Configure the SDRAMC PIO controller to output PCK0 */
++/*	pio_setup(sdramc_pio); */
++
++	writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_ASR(0));
++	writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_PDR(0));
++
++}
++#endif /* CFG_SDRAM */
++
++#ifdef CFG_NANDFLASH
++/*------------------------------------------------------------------------------*/
++/* \fn    nand_recovery						*/
++/* \brief This function erases NandFlash Block 0 if BP4 is pressed 		*/
++/*        during boot sequence							*/
++/*------------------------------------------------------------------------------*/
++static void nand_recovery(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc bp4_pio[] = {
++		{"BP4", AT91C_PIN_PA(31), 0, PIO_PULLUP, PIO_INPUT},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the PIO controller */
++	writel((1 << AT91C_ID_PIOA), PMC_PCER + AT91C_BASE_PMC);
++	pio_setup(bp4_pio);
++	
++	/* If BP4 is pressed during Boot sequence */
++	/* Erase NandFlash block 0*/
++	if (!pio_get_value(AT91C_PIN_PA(31)) )
++		AT91F_NandEraseBlock0();
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_hw_init							*/
++/* \brief NandFlash HW init							*/
++/*------------------------------------------------------------------------------*/
++void nandflash_hw_init(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc nand_pio[] = {
++		{"RDY_BSY", AT91C_PIN_PC(13), 0, PIO_PULLUP, PIO_INPUT},
++		{"NANDCS",  AT91C_PIN_PC(14), 0, PIO_PULLUP, PIO_OUTPUT},
++		{(char *) 0, 0, 0,  PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Setup Smart Media, first enable the address range of CS3 in HMATRIX user interface */
++	writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) | AT91C_EBI_CS3A_SM, AT91C_BASE_CCFG + CCFG_EBICSA);
++		    
++	/* Configure SMC CS3 */
++ 	writel((AT91C_SM_NWE_SETUP | AT91C_SM_NCS_WR_SETUP | AT91C_SM_NRD_SETUP | AT91C_SM_NCS_RD_SETUP), AT91C_BASE_SMC + SMC_SETUP3);
++  	writel((AT91C_SM_NWE_PULSE | AT91C_SM_NCS_WR_PULSE | AT91C_SM_NRD_PULSE | AT91C_SM_NCS_RD_PULSE), AT91C_BASE_SMC + SMC_PULSE3);
++	writel((AT91C_SM_NWE_CYCLE | AT91C_SM_NRD_CYCLE)						, AT91C_BASE_SMC + SMC_CYCLE3);
++	writel((AT91C_SMC_READMODE | AT91C_SMC_WRITEMODE | AT91C_SMC_NWAITM_NWAIT_DISABLE | 
++  		AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS | AT91C_SM_TDF)						, AT91C_BASE_SMC + SMC_CTRL3);
++
++	/* Configure the PIO controller */
++	writel((1 << AT91C_ID_PIOC), PMC_PCER + AT91C_BASE_PMC);
++	pio_setup(nand_pio);
++	
++	nand_recovery();
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_cfg_16bits_dbw_init						*/
++/* \brief Configure SMC in 16 bits mode						*/
++/*------------------------------------------------------------------------------*/
++void nandflash_cfg_16bits_dbw_init(void)
++{
++	writel(readl(AT91C_BASE_SMC + SMC_CTRL3) | AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS, AT91C_BASE_SMC + SMC_CTRL3);
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_cfg_8bits_dbw_init						*/
++/* \brief Configure SMC in 8 bits mode						*/
++/*------------------------------------------------------------------------------*/
++void nandflash_cfg_8bits_dbw_init(void)
++{
++	writel((readl(AT91C_BASE_SMC + SMC_CTRL3) & ~(AT91C_SMC_DBW)) | AT91C_SMC_DBW_WIDTH_EIGTH_BITS, AT91C_BASE_SMC + SMC_CTRL3);
++}
++
++#endif /* #ifdef CFG_NANDFLASH */
+diff --git a/crt0_gnu.S b/crt0_gnu.S
+index 042b617..c6cd49d 100644
+--- a/crt0_gnu.S
++++ b/crt0_gnu.S
+@@ -106,6 +106,12 @@ _relocate_to_sram:
+ #endif /* CFG_NORFLASH */
+ 
+ _setup_clocks:
++/* Test if main osc is bypassed */
++	ldr 	r0,=AT91C_PMC_MOR
++	ldr 	r1, [r0]
++	ldr 	r2,=AT91C_CKGR_OSCBYPASS 
++	ands 	r1, r1, r2
++	bne	_init_data	/* branch if OSCBYPASS=1 */
+ /* Test if main oscillator is enabled */
+ 	ldr 	r0,=AT91C_PMC_SR
+ 	ldr 	r1, [r0]
+diff --git a/include/part.h b/include/part.h
+index ba5985a..ab79af1 100644
+--- a/include/part.h
++++ b/include/part.h
+@@ -46,7 +46,11 @@
+ 
+ #ifdef AT91SAM9G20
+ #include "AT91SAM9260_inc.h"
+-#include "at91sam9g20ek.h"
++	#ifdef at91sam9g20ek
++	#include "at91sam9g20ek.h"
++	#elif tny_a9g20_lpw
++	#include "tny-a9g20-lpw.h"
++	#endif
+ #endif
+ 
+ #ifdef AT91SAM9261
+-- 
+1.7.9.5
+

board/calao/tny-a9g20-lpw/linux-3.9.config

@@ -0,0 +1,187 @@
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EMBEDDED=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_AT91=y
+CONFIG_SOC_AT91SAM9260=y
+CONFIG_SOC_AT91SAM9263=y
+CONFIG_SOC_AT91SAM9G45=y
+CONFIG_SOC_AT91SAM9X5=y
+CONFIG_SOC_AT91SAM9N12=y
+CONFIG_MACH_AT91SAM_DT=y
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AT91_TIMER_HZ=128
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_UACCESS_WITH_MEMCPY=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
+CONFIG_KEXEC=y
+CONFIG_AUTO_ZRELADDR=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+CONFIG_IPV6=y
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+CONFIG_IPV6_SIT_6RD=y
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_GLUEBI=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_ATMEL_PWM=y
+CONFIG_ATMEL_TCLIB=y
+CONFIG_EEPROM_93CX6=m
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+CONFIG_DAVICOM_PHY=y
+CONFIG_MICREL_PHY=y
+# CONFIG_WLAN is not set
+CONFIG_INPUT_POLLDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=480
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=272
+CONFIG_INPUT_JOYDEV=y
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_SERIO is not set
+CONFIG_LEGACY_PTY_COUNT=4
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_GPIO=y
+CONFIG_SPI=y
+CONFIG_SPI_ATMEL=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_AT91SAM9X_WATCHDOG=y
+CONFIG_SSB=m
+CONFIG_FB=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_ATMEL=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_ATMEL_LCDC=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_ACORN_8x8=y
+CONFIG_FONT_MINI_4x6=y
+CONFIG_LOGO=y
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_ACM=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_FTDI_SIO=y
+CONFIG_USB_SERIAL_PL2303=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_AT91=m
+CONFIG_USB_ETH=m
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_CDC_COMPOSITE=m
+CONFIG_USB_G_ACM_MS=m
+CONFIG_USB_G_MULTI=m
+CONFIG_USB_G_MULTI_CDC=y
+CONFIG_MMC=y
+CONFIG_MMC_ATMELMCI=y
+CONFIG_MMC_SPI=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_AT91RM9200=y
+CONFIG_RTC_DRV_AT91SAM9=y
+CONFIG_DMADEVICES=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_FANOTIFY=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_USER=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_CCITT=m
+CONFIG_AVERAGE=y

board/calao/usb-a9260/at91bootstrap-1.16-usb-a9260.patch

@@ -0,0 +1,603 @@
+From 43e8c90f13806405bde8eaaf3a956d0ddc806f64 Mon Sep 17 00:00:00 2001
+From: Gregory Hermant <gregory.hermant@calao-systems.com>
+Date: Tue, 2 Oct 2012 09:19:15 +0200
+Subject: [PATCH] Add support for the USB-A9260
+
+
+Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
+---
+ board/usb_a9260/nandflash/Makefile    |  122 ++++++++++++++
+ board/usb_a9260/nandflash/usb-a9260.h |  109 ++++++++++++
+ board/usb_a9260/usb_a9260.c           |  298 +++++++++++++++++++++++++++++++++
+ crt0_gnu.S                            |    7 +
+ include/part.h                        |    6 +-
+ 5 files changed, 541 insertions(+), 1 deletion(-)
+ create mode 100644 board/usb_a9260/nandflash/Makefile
+ create mode 100644 board/usb_a9260/nandflash/usb-a9260.h
+ create mode 100644 board/usb_a9260/usb_a9260.c
+
+diff --git a/board/usb_a9260/nandflash/Makefile b/board/usb_a9260/nandflash/Makefile
+new file mode 100644
+index 0000000..02f4b50
+--- /dev/null
++++ b/board/usb_a9260/nandflash/Makefile
+@@ -0,0 +1,122 @@
++# TODO: set this appropriately for your local toolchain
++ifndef ERASE_FCT
++ERASE_FCT=rm -f
++endif
++ifndef CROSS_COMPILE
++CROSS_COMPILE=arm-elf-
++endif
++
++TOOLCHAIN=gcc
++
++BOOTSTRAP_PATH=../../..
++
++# NandFlashBoot Configuration for USB-A9260
++
++# Target name (case sensitive!!!)
++TARGET=AT91SAM9260
++# Board name (case sensitive!!!)
++BOARD=usb_a9260
++# Link Address and Top_of_Memory
++LINK_ADDR=0x200000
++TOP_OF_MEMORY=0x301000
++# Name of current directory
++PROJECT=nandflash
++
++ifndef BOOT_NAME
++BOOT_NAME=$(PROJECT)_$(BOARD)
++endif
++
++INCL=./$(BOOTSTRAP_PATH)/board/$(BOARD)/$(PROJECT)
++
++ifeq ($(TOOLCHAIN), gcc)
++
++AS=$(CROSS_COMPILE)gcc
++CC=$(CROSS_COMPILE)gcc
++LD=$(CROSS_COMPILE)gcc
++NM= $(CROSS_COMPILE)nm
++SIZE=$(CROSS_COMPILE)size
++OBJCOPY=$(CROSS_COMPILE)objcopy
++OBJDUMP=$(CROSS_COMPILE)objdump
++CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL)
++ASFLAGS=-g -mcpu=arm926ej-s -c -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
++
++# Linker flags.
++#  -Wl,...:     tell GCC to pass this to linker.
++#    -Map:      create map file
++#    --cref:    add cross reference to map file
++LDFLAGS+=-nostartfiles -nostdlib -Wl,-Map=$(BOOT_NAME).map,--cref
++LDFLAGS+=-T $(BOOTSTRAP_PATH)/elf32-littlearm.lds -Ttext $(LINK_ADDR)
++OBJS=crt0_gnu.o
++
++endif
++
++OBJS+=\
++	$(BOARD).o \
++	main.o \
++	gpio.o \
++	pmc.o \
++	debug.o \
++	sdramc.o \
++	nandflash.o \
++	_udivsi3.o \
++	_umodsi3.o \
++	div0.o \
++	udiv.o \
++	string.o
++
++
++rebuild: clean all
++
++all: 	$(BOOT_NAME)
++
++ifeq ($(TOOLCHAIN), gcc)
++$(BOOT_NAME): $(OBJS)
++	$(LD) $(LDFLAGS) -n -o $(BOOT_NAME).elf $(OBJS)
++	$(OBJCOPY) --strip-debug --strip-unneeded $(BOOT_NAME).elf -O binary $(BOOT_NAME).bin
++endif
++
++
++$(BOARD).o: $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c -o $(BOARD).o
++
++main.o: $(BOOTSTRAP_PATH)/main.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/main.c -o main.o
++
++gpio.o: $(BOOTSTRAP_PATH)/driver/gpio.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/gpio.c -o gpio.o
++
++pmc.o:  $(BOOTSTRAP_PATH)/driver/pmc.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/pmc.c -o pmc.o
++
++debug.o: $(BOOTSTRAP_PATH)/driver/debug.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/debug.c -o debug.o
++
++sdramc.o:  $(BOOTSTRAP_PATH)/driver/sdramc.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/sdramc.c -o sdramc.o
++
++dataflash.o:  $(BOOTSTRAP_PATH)/driver/dataflash.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/dataflash.c -o dataflash.o
++
++nandflash.o:  $(BOOTSTRAP_PATH)/driver/nandflash.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/nandflash.c -o nandflash.o
++
++crt0_gnu.o:  $(BOOTSTRAP_PATH)/crt0_gnu.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/crt0_gnu.S -o crt0_gnu.o
++
++div0.o:  $(BOOTSTRAP_PATH)/lib/div0.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/div0.c -o div0.o
++
++string.o:  $(BOOTSTRAP_PATH)/lib/string.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/string.c -o string.o
++
++udiv.o:  $(BOOTSTRAP_PATH)/lib/udiv.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/udiv.c -o udiv.o
++
++_udivsi3.o:  $(BOOTSTRAP_PATH)/lib/_udivsi3.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_udivsi3.S -o _udivsi3.o
++
++_umodsi3.o:  $(BOOTSTRAP_PATH)/lib/_umodsi3.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_umodsi3.S -o _umodsi3.o
++
++clean:
++	$(ERASE_FCT) *.o *.bin *.elf *.map
+diff --git a/board/usb_a9260/nandflash/usb-a9260.h b/board/usb_a9260/nandflash/usb-a9260.h
+new file mode 100644
+index 0000000..2aaf759
+--- /dev/null
++++ b/board/usb_a9260/nandflash/usb-a9260.h
+@@ -0,0 +1,109 @@
++/* ----------------------------------------------------------------------------
++ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
++ * ----------------------------------------------------------------------------
++ * Copyright (c) 2006, Atmel Corporation
++
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ *
++ * - Redistributions of source code must retain the above copyright notice,
++ * this list of conditions and the disclaimer below.
++ *
++ * Atmel's name may not be used to endorse or promote products derived from
++ * this software without specific prior written permission.
++ *
++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ----------------------------------------------------------------------------
++ * File Name           : usb-a9260.h
++ * Object              :
++ * Creation            : GH Oct 1th 2012
++ *-----------------------------------------------------------------------------
++ */
++#ifndef _USB_A9260_H
++#define _USB_A9260_H
++
++/* ******************************************************************* */
++/* PMC Settings                                                        */
++/*                                                                     */
++/* The main oscillator is enabled as soon as possible in the c_startup */
++/* and MCK is switched on the main oscillator.                         */
++/* PLL initialization is done later in the hw_init() function          */
++/* ******************************************************************* */
++#define MASTER_CLOCK		(180000000/2)
++#define PLL_LOCK_TIMEOUT	1000000
++
++#define PLLA_SETTINGS	0x20593F06
++#define PLLB_SETTINGS	0x10483F0E
++
++/* Switch MCK on PLLA output PCK = PLLA = 2 * MCK */
++#define MCKR_SETTINGS		(AT91C_PMC_PRES_CLK | AT91C_PMC_MDIV_2)
++#define MCKR_CSS_SETTINGS	(AT91C_PMC_CSS_PLLA_CLK | MCKR_SETTINGS)
++
++/* ******************************************************************* */
++/* NandFlash Settings                                                  */
++/*                                                                     */
++/* ******************************************************************* */
++#define AT91C_SMARTMEDIA_BASE	0x40000000
++
++#define AT91_SMART_MEDIA_ALE    (1 << 21)	/* our ALE is AD21 */
++#define AT91_SMART_MEDIA_CLE    (1 << 22)	/* our CLE is AD22 */
++
++#define NAND_DISABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_SODR = AT91C_PIO_PC14;} while(0)
++#define NAND_ENABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_CODR = AT91C_PIO_PC14;} while(0)
++
++#define NAND_WAIT_READY() while (!(*(volatile unsigned int *)AT91C_PIOC_PDSR & AT91C_PIO_PC13))
++
++
++/* ******************************************************************** */
++/* SMC Chip Select 3 Timings for NandFlash for MASTER_CLOCK = 90000000.*/
++/* Please refer to SMC section in AT91SAM datasheet to learn how 	*/
++/* to generate these values. 						*/
++/* ******************************************************************** */
++#define AT91C_SM_NWE_SETUP	(1 << 0)
++#define AT91C_SM_NCS_WR_SETUP	(0 << 8)
++#define AT91C_SM_NRD_SETUP	(1 << 16)
++#define AT91C_SM_NCS_RD_SETUP	(0 << 24)
++  
++#define AT91C_SM_NWE_PULSE 	(3 << 0)
++#define AT91C_SM_NCS_WR_PULSE	(3 << 8)
++#define AT91C_SM_NRD_PULSE	(3 << 16)
++#define AT91C_SM_NCS_RD_PULSE	(3 << 24)
++  
++#define AT91C_SM_NWE_CYCLE 	(5 << 0)
++#define AT91C_SM_NRD_CYCLE	(5 << 16)
++#define AT91C_SM_TDF	        (2 << 16)
++
++/* ******************************************************************* */
++/* BootStrap Settings                                                  */
++/*                                                                     */
++/* ******************************************************************* */
++#define IMG_ADDRESS 		0x20000		/* Image Address in NandFlash */
++#define	IMG_SIZE		0x40000		/* Image Size in NandFlash    */
++
++#define MACH_TYPE       	0x6AD		/* USB-A9260 */
++#define JUMP_ADDR		0x23F00000	/* Final Jump Address 	      */
++
++/* ******************************************************************* */
++/* Application Settings                                                */
++/* ******************************************************************* */
++#undef CFG_DEBUG
++#undef CFG_DATAFLASH
++
++#define CFG_NANDFLASH
++#undef	NANDFLASH_SMALL_BLOCKS	/* NANDFLASH_LARGE_BLOCKS used instead */
++
++#define CFG_HW_INIT
++#define CFG_SDRAM
++
++#endif	/* _USB_A9260_H */
+diff --git a/board/usb_a9260/usb_a9260.c b/board/usb_a9260/usb_a9260.c
+new file mode 100644
+index 0000000..de30f0b
+--- /dev/null
++++ b/board/usb_a9260/usb_a9260.c
+@@ -0,0 +1,298 @@
++/* ----------------------------------------------------------------------------
++ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
++ * ----------------------------------------------------------------------------
++ * Copyright (c) 2006, Atmel Corporation
++
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ *
++ * - Redistributions of source code must retain the above copyright notice,
++ * this list of conditions and the disclaiimer below.
++ *
++ * Atmel's name may not be used to endorse or promote products derived from
++ * this software without specific prior written permission.
++ *
++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ----------------------------------------------------------------------------
++ * File Name           : usb_a9260.c
++ * Object              :
++ * Creation            : GH Oct 1th 2012
++ *-----------------------------------------------------------------------------
++ */
++#include "../../include/part.h"
++#include "../../include/gpio.h"
++#include "../../include/pmc.h"
++#include "../../include/debug.h"
++#include "../../include/sdramc.h"
++#include "../../include/main.h"
++#ifdef CFG_NANDFLASH
++#include "../../include/nandflash.h"
++#endif
++#ifdef CFG_DATAFLASH
++#include "../../include/dataflash.h"
++#endif
++
++static inline unsigned int get_cp15(void)
++{
++	unsigned int value;
++	__asm__("mrc p15, 0, %0, c1, c0, 0" : "=r" (value));
++	return value;
++}
++
++static inline void set_cp15(unsigned int value)
++{
++	__asm__("mcr p15, 0, %0, c1, c0, 0" : : "r" (value));
++}
++
++#ifdef CFG_HW_INIT
++/*----------------------------------------------------------------------------*/
++/* \fn    hw_init							      */
++/* \brief This function performs very low level HW initialization	      */
++/* This function is invoked as soon as possible during the c_startup	      */
++/* The bss segment must be initialized					      */
++/*----------------------------------------------------------------------------*/
++void hw_init(void)
++{
++	unsigned int cp15;
++	
++	/* Configure PIOs */
++	const struct pio_desc hw_pio[] = {
++#ifdef CFG_DEBUG
++		{"RXD", AT91C_PIN_PB(14), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"TXD", AT91C_PIN_PB(15), 0, PIO_DEFAULT, PIO_PERIPH_A},
++#endif
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Disable watchdog */
++	writel(AT91C_WDTC_WDDIS, AT91C_BASE_WDTC + WDTC_WDMR);
++
++	/* At this stage the main oscillator is supposed to be enabled
++	 * PCK = MCK = MOSC */
++
++	/* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */
++	pmc_cfg_plla(PLLA_SETTINGS, PLL_LOCK_TIMEOUT);
++
++	/* PCK = PLLA = 2 * MCK */
++	pmc_cfg_mck(MCKR_SETTINGS, PLL_LOCK_TIMEOUT);
++	/* Switch MCK on PLLA output */
++	pmc_cfg_mck(MCKR_CSS_SETTINGS, PLL_LOCK_TIMEOUT);
++
++	/* Configure PLLB */
++	pmc_cfg_pllb(PLLB_SETTINGS, PLL_LOCK_TIMEOUT);
++
++	/* Configure CP15 */
++	cp15 = get_cp15();
++	cp15 |= I_CACHE;
++	set_cp15(cp15);
++
++	/* Configure the PIO controller */
++	pio_setup(hw_pio);
++
++	/* Configure the EBI Slave Slot Cycle to 64 */
++	writel( (readl((AT91C_BASE_MATRIX + MATRIX_SCFG3)) & ~0xFF) | 0x40, (AT91C_BASE_MATRIX + MATRIX_SCFG3));
++
++#ifdef CFG_DEBUG
++	/* Enable Debug messages on the DBGU */
++	dbg_init(BAUDRATE(MASTER_CLOCK, 115200));
++
++	dbg_print("Start AT91Bootstrap...\n\r");
++#endif /* CFG_DEBUG */
++
++#ifdef CFG_SDRAM
++	/* Initialize the matrix */
++	writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) | AT91C_EBI_CS1A_SDRAMC, AT91C_BASE_CCFG + CCFG_EBICSA);
++
++	/* Configure SDRAM Controller */
++	sdram_init(	AT91C_SDRAMC_NC_9  |
++				AT91C_SDRAMC_NR_13 |
++				AT91C_SDRAMC_CAS_2 |
++				AT91C_SDRAMC_NB_4_BANKS |
++				AT91C_SDRAMC_DBW_32_BITS |
++				AT91C_SDRAMC_TWR_2 |
++				AT91C_SDRAMC_TRC_7 |
++				AT91C_SDRAMC_TRP_2 |
++				AT91C_SDRAMC_TRCD_2 |
++				AT91C_SDRAMC_TRAS_5 |
++				AT91C_SDRAMC_TXSR_8,		/* Control Register */
++				(MASTER_CLOCK * 7)/1000000,	/* Refresh Timer Register */
++				AT91C_SDRAMC_MD_SDRAM);		/* SDRAM (no low power)   */ 
++
++
++#endif /* CFG_SDRAM */
++}
++#endif /* CFG_HW_INIT */
++
++#ifdef CFG_SDRAM
++/*------------------------------------------------------------------------------*/
++/* \fn    sdramc_hw_init							*/
++/* \brief This function performs SDRAMC HW initialization			*/
++/*------------------------------------------------------------------------------*/
++void sdramc_hw_init(void)
++{
++	/* Configure PIOs */
++/*	const struct pio_desc sdramc_pio[] = {
++		{"D16", AT91C_PIN_PC(16), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D17", AT91C_PIN_PC(17), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D18", AT91C_PIN_PC(18), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D19", AT91C_PIN_PC(19), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D20", AT91C_PIN_PC(20), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D21", AT91C_PIN_PC(21), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D22", AT91C_PIN_PC(22), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D23", AT91C_PIN_PC(23), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D24", AT91C_PIN_PC(24), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D25", AT91C_PIN_PC(25), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D26", AT91C_PIN_PC(26), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D27", AT91C_PIN_PC(27), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D28", AT91C_PIN_PC(28), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D29", AT91C_PIN_PC(29), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D30", AT91C_PIN_PC(30), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D31", AT91C_PIN_PC(31), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++*/
++	/* Configure the SDRAMC PIO controller to output PCK0 */
++/*	pio_setup(sdramc_pio); */
++
++	writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_ASR(0));
++	writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_PDR(0));
++
++}
++#endif /* CFG_SDRAM */
++
++#ifdef CFG_DATAFLASH
++
++/*------------------------------------------------------------------------------*/
++/* \fn    df_recovery								*/
++/* \brief This function erases DataFlash Page 0 if USR PB is pressed 		*/
++/*        during boot sequence							*/
++/*------------------------------------------------------------------------------*/
++void df_recovery(AT91PS_DF pDf)
++{
++#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS0_DATAFLASH)
++	/* Configure PIOs */
++	const struct pio_desc usrpb_pio[] = {
++		{"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the PIO controller */
++	writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
++	pio_setup(usrpb_pio);
++	
++	/* If USR PB is pressed during Boot sequence */
++	/* Erase DataFlash Page 0*/
++	if ( !pio_get_value(AT91C_PIN_PB(10)) )
++		df_page_erase(pDf, 0);
++#endif
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    df_hw_init								*/
++/* \brief This function performs DataFlash HW initialization			*/
++/*------------------------------------------------------------------------------*/
++void df_hw_init(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc df_pio[] = {
++		{"MISO",  AT91C_PIN_PA(0), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"MOSI",  AT91C_PIN_PA(1), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"SPCK",  AT91C_PIN_PA(2), 0, PIO_DEFAULT, PIO_PERIPH_A},
++#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS0_DATAFLASH)
++		{"NPCS0", AT91C_PIN_PA(3), 0, PIO_DEFAULT, PIO_PERIPH_A},
++#endif
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the PIO controller */
++	pio_setup(df_pio);
++}
++#endif /* CFG_DATAFLASH */
++
++
++
++#ifdef CFG_NANDFLASH
++/*------------------------------------------------------------------------------*/
++/* \fn    nand_recovery						*/
++/* \brief This function erases NandFlash Block 0 if USR PB is pressed 		*/
++/*        during boot sequence							*/
++/*------------------------------------------------------------------------------*/
++static void nand_recovery(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc usrpb_pio[] = {
++		{"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the PIO controller */
++	writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
++	pio_setup(usrpb_pio);
++	
++	/* If USR PB is pressed during Boot sequence */
++	/* Erase NandFlash block 0*/
++	if (!pio_get_value(AT91C_PIN_PB(10)) )
++		AT91F_NandEraseBlock0();
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_hw_init							*/
++/* \brief NandFlash HW init							*/
++/*------------------------------------------------------------------------------*/
++void nandflash_hw_init(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc nand_pio[] = {
++		{"RDY_BSY", AT91C_PIN_PC(13), 0, PIO_PULLUP, PIO_INPUT},
++		{"NANDCS",  AT91C_PIN_PC(14), 0, PIO_PULLUP, PIO_OUTPUT},
++		{(char *) 0, 0, 0,  PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Setup Smart Media, first enable the address range of CS3 in HMATRIX user interface */
++	writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) | AT91C_EBI_CS3A_SM, AT91C_BASE_CCFG + CCFG_EBICSA);
++		    
++	/* Configure SMC CS3 */
++ 	writel((AT91C_SM_NWE_SETUP | AT91C_SM_NCS_WR_SETUP | AT91C_SM_NRD_SETUP | AT91C_SM_NCS_RD_SETUP), AT91C_BASE_SMC + SMC_SETUP3);
++  	writel((AT91C_SM_NWE_PULSE | AT91C_SM_NCS_WR_PULSE | AT91C_SM_NRD_PULSE | AT91C_SM_NCS_RD_PULSE), AT91C_BASE_SMC + SMC_PULSE3);
++	writel((AT91C_SM_NWE_CYCLE | AT91C_SM_NRD_CYCLE)						, AT91C_BASE_SMC + SMC_CYCLE3);
++	writel((AT91C_SMC_READMODE | AT91C_SMC_WRITEMODE | AT91C_SMC_NWAITM_NWAIT_DISABLE | 
++  		AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS | AT91C_SM_TDF)						, AT91C_BASE_SMC + SMC_CTRL3);
++
++	/* Configure the PIO controller */
++	writel((1 << AT91C_ID_PIOC), PMC_PCER + AT91C_BASE_PMC);
++	pio_setup(nand_pio);
++	
++	nand_recovery();
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_cfg_16bits_dbw_init						*/
++/* \brief Configure SMC in 16 bits mode						*/
++/*------------------------------------------------------------------------------*/
++void nandflash_cfg_16bits_dbw_init(void)
++{
++	writel(readl(AT91C_BASE_SMC + SMC_CTRL3) | AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS, AT91C_BASE_SMC + SMC_CTRL3);
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_cfg_8bits_dbw_init						*/
++/* \brief Configure SMC in 8 bits mode						*/
++/*------------------------------------------------------------------------------*/
++void nandflash_cfg_8bits_dbw_init(void)
++{
++	writel((readl(AT91C_BASE_SMC + SMC_CTRL3) & ~(AT91C_SMC_DBW)) | AT91C_SMC_DBW_WIDTH_EIGTH_BITS, AT91C_BASE_SMC + SMC_CTRL3);
++}
++
++
++#endif /* #ifdef CFG_NANDFLASH */
+diff --git a/crt0_gnu.S b/crt0_gnu.S
+index 042b617..002feef 100644
+--- a/crt0_gnu.S
++++ b/crt0_gnu.S
+@@ -106,6 +106,13 @@ _relocate_to_sram:
+ #endif /* CFG_NORFLASH */
+ 
+ _setup_clocks:
++/* Test if main osc is bypassed */
++	ldr 	r0,=AT91C_PMC_MOR
++	ldr 	r1, [r0]
++	ldr 	r2,=AT91C_CKGR_OSCBYPASS 
++	ands 	r1, r1, r2
++	bne	_init_data	/* branch if OSCBYPASS=1 */
++
+ /* Test if main oscillator is enabled */
+ 	ldr 	r0,=AT91C_PMC_SR
+ 	ldr 	r1, [r0]
+diff --git a/include/part.h b/include/part.h
+index ba5985a..212789f 100644
+--- a/include/part.h
++++ b/include/part.h
+@@ -35,7 +35,11 @@
+ 
+ #ifdef AT91SAM9260
+ #include "AT91SAM9260_inc.h"
+-#include "at91sam9260ek.h"
++	#ifdef at91sam9260ek
++	#include "at91sam9260ek.h"
++	#elif usb_a9260
++	#include "usb-a9260.h"
++	#endif
+ #endif
+ 
+ #ifdef AT91SAM9XE
+-- 
+1.7.9.5
+

board/calao/usb-a9260/linux-3.7.4.config

@@ -0,0 +1,97 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_AT91=y
+CONFIG_ARCH_AT91SAM9260=y
+CONFIG_MACH_USB_A9260=y
+CONFIG_AT91_SLOW_CLOCK=y
+# CONFIG_ARM_THUMB is not set
+CONFIG_AEABI=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
+CONFIG_FPE_NWFPE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_SPI=y
+CONFIG_SPI_ATMEL=y
+# CONFIG_HWMON is not set
+# CONFIG_USB_HID is not set
+CONFIG_USB=y
+CONFIG_USB_MON=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_EXT2_FS=y
+CONFIG_FUSE_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_UBIFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_LL=y

board/calao/usb-a9263/at91bootstrap-1.16-usb-a9263.patch

@@ -0,0 +1,851 @@
+From 74796655212d321f50ab89e8c5570245901f4cba Mon Sep 17 00:00:00 2001
+From: Gregory Hermant <gregory.hermant@calao-systems.com>
+Date: Thu, 5 Jul 2012 18:44:07 +0200
+Subject: [PATCH] Add support for the Calao-systems USB-A9263
+
+
+Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
+---
+ board/usb_a9263/dataflash/Makefile    |  115 +++++++++++++
+ board/usb_a9263/dataflash/usb-a9263.h |   97 +++++++++++
+ board/usb_a9263/nandflash/Makefile    |  117 ++++++++++++++
+ board/usb_a9263/nandflash/usb-a9263.h |  116 +++++++++++++
+ board/usb_a9263/usb_a9263.c           |  285 +++++++++++++++++++++++++++++++++
+ crt0_gnu.S                            |    7 +
+ driver/dataflash.c                    |    6 +-
+ include/part.h                        |    6 +-
+ 8 files changed, 745 insertions(+), 4 deletions(-)
+ create mode 100644 board/usb_a9263/dataflash/Makefile
+ create mode 100644 board/usb_a9263/dataflash/usb-a9263.h
+ create mode 100644 board/usb_a9263/nandflash/Makefile
+ create mode 100644 board/usb_a9263/nandflash/usb-a9263.h
+ create mode 100644 board/usb_a9263/usb_a9263.c
+
+diff --git a/board/usb_a9263/dataflash/Makefile b/board/usb_a9263/dataflash/Makefile
+new file mode 100644
+index 0000000..332685e
+--- /dev/null
++++ b/board/usb_a9263/dataflash/Makefile
+@@ -0,0 +1,115 @@
++# TODO: set this appropriately for your local toolchain
++#SHELL=C:\CYGWIN_REP\dwn_071004\bin\BASH.exe
++CROSS_COMPILE=arm-elf-
++#CROSS_COMPILE = arm-softfloat-linux-gnu-
++
++TOOLCHAIN=gcc
++
++BOOTSTRAP_PATH=../../..
++
++# DataFlashBoot Configuration for USB-A9263
++
++# Target name (case sensitive!!!)
++TARGET=AT91SAM9263
++# Board name (case sensitive!!!)
++BOARD=usb_a9263
++# Link Address and Top_of_Memory
++LINK_ADDR=0x300000
++TOP_OF_MEMORY=0x314000
++# Name of current directory
++PROJECT=dataflash
++
++ifndef BOOT_NAME
++BOOT_NAME=$(PROJECT)_$(BOARD)
++endif
++
++INCL=./$(BOOTSTRAP_PATH)/board/$(BOARD)/$(PROJECT)
++
++ifeq ($(TOOLCHAIN), gcc)
++
++AS=$(CROSS_COMPILE)gcc
++CC=$(CROSS_COMPILE)gcc
++LD=$(CROSS_COMPILE)gcc
++NM= $(CROSS_COMPILE)nm
++SIZE=$(CROSS_COMPILE)size
++OBJCOPY=$(CROSS_COMPILE)objcopy
++OBJDUMP=$(CROSS_COMPILE)objdump
++CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL)
++ASFLAGS=-g -mcpu=arm9 -c -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
++
++# Linker flags.
++#  -Wl,...:     tell GCC to pass this to linker.
++#    -Map:      create map file
++#    --cref:    add cross reference to map file
++LDFLAGS+=-nostartfiles -nostdlib  -Wl,-Map=$(BOOT_NAME).map,--cref
++LDFLAGS+=-T $(BOOTSTRAP_PATH)/elf32-littlearm.lds -Ttext $(LINK_ADDR)
++OBJS=crt0_gnu.o
++
++endif
++
++OBJS+=\
++	$(BOARD).o \
++	main.o \
++	gpio.o \
++	pmc.o \
++	debug.o \
++	sdramc.o \
++	dataflash.o \
++	_udivsi3.o \
++	_umodsi3.o \
++	div0.o \
++	udiv.o \
++	string.o
++
++rebuild: clean all
++
++all: 	$(BOOT_NAME)
++
++ifeq ($(TOOLCHAIN), gcc)
++$(BOOT_NAME): $(OBJS)
++	$(LD) $(LDFLAGS) -n -o $(BOOT_NAME).elf $(OBJS)
++	$(OBJCOPY) --strip-debug --strip-unneeded $(BOOT_NAME).elf -O binary $(BOOT_NAME).bin
++endif
++	
++	
++$(BOARD).o: $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c -o $(BOARD).o
++
++main.o: $(BOOTSTRAP_PATH)/main.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/main.c -o main.o
++
++gpio.o: $(BOOTSTRAP_PATH)/driver/gpio.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/gpio.c -o gpio.o
++
++pmc.o:  $(BOOTSTRAP_PATH)/driver/pmc.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/pmc.c -o pmc.o
++
++debug.o: $(BOOTSTRAP_PATH)/driver/debug.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/debug.c -o debug.o
++
++sdramc.o:  $(BOOTSTRAP_PATH)/driver/sdramc.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/sdramc.c -o sdramc.o
++
++dataflash.o:  $(BOOTSTRAP_PATH)/driver/dataflash.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/dataflash.c -o dataflash.o
++
++crt0_gnu.o:  $(BOOTSTRAP_PATH)/crt0_gnu.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/crt0_gnu.S -o crt0_gnu.o
++
++div0.o:  $(BOOTSTRAP_PATH)/lib/div0.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/div0.c -o div0.o
++
++string.o:  $(BOOTSTRAP_PATH)/lib/string.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/string.c -o string.o
++
++udiv.o:  $(BOOTSTRAP_PATH)/lib/udiv.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/udiv.c -o udiv.o
++
++_udivsi3.o:  $(BOOTSTRAP_PATH)/lib/_udivsi3.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_udivsi3.S -o _udivsi3.o
++
++_umodsi3.o:  $(BOOTSTRAP_PATH)/lib/_umodsi3.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_umodsi3.S -o _umodsi3.o
++
++clean:
++	rm -f *.o *.bin *.elf *.map
+diff --git a/board/usb_a9263/dataflash/usb-a9263.h b/board/usb_a9263/dataflash/usb-a9263.h
+new file mode 100644
+index 0000000..40a3af8
+--- /dev/null
++++ b/board/usb_a9263/dataflash/usb-a9263.h
+@@ -0,0 +1,97 @@
++/* ----------------------------------------------------------------------------
++ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
++ * ----------------------------------------------------------------------------
++ * Copyright (c) 2006, Atmel Corporation
++
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ *
++ * - Redistributions of source code must retain the above copyright notice,
++ * this list of conditions and the disclaimer below.
++ *
++ * Atmel's name may not be used to endorse or promote products derived from
++ * this software without specific prior written permission.
++ *
++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ----------------------------------------------------------------------------
++ * File Name           : usb-a9263.h
++ * Object              :
++ * Creation            : GH Jun 28th 2012
++ *-----------------------------------------------------------------------------
++ */
++#ifndef _USB_A9263_H
++#define _USB_A9263_H
++
++/* ******************************************************************* */
++/* PMC Settings                                                        */
++/*                                                                     */
++/* The main oscillator is enabled as soon as possible in the c_startup */
++/* and MCK is switched on the main oscillator.                         */
++/* PLL initialization is done later in the hw_init() function          */
++/* ******************************************************************* */
++#define MASTER_CLOCK		(180000000/2)
++#define PLL_LOCK_TIMEOUT	1000000
++
++#define PLLA_SETTINGS	0x20593F06
++#define PLLB_SETTINGS	0x10483F0E
++
++/* Switch MCK on PLLA output PCK = PLLA = 2 * MCK */
++#define MCKR_SETTINGS		(AT91C_PMC_PRES_CLK | AT91C_PMC_MDIV_2)
++#define MCKR_CSS_SETTINGS	(AT91C_PMC_CSS_PLLA_CLK | MCKR_SETTINGS)
++
++/* ******************************************************************* */
++/* DataFlash Settings                                                  */
++/*                                                                     */
++/* ******************************************************************* */
++#define AT91C_BASE_SPI	AT91C_BASE_SPI0
++#define AT91C_ID_SPI	AT91C_ID_SPI0
++
++/* SPI CLOCK */
++#define AT91C_SPI_CLK 		 8000000
++/* AC characteristics */
++/* DLYBS = tCSS= 250ns min and DLYBCT = tCSH = 250ns */
++#define DATAFLASH_TCSS		(0x1a << 16)	/* 250ns min (tCSS) <=> 12/48000000 = 250ns */
++#define DATAFLASH_TCHS		(0x1 << 24)	/* 250ns min (tCSH) <=> (64*1+SCBR)/(2*48000000) */
++
++#define DF_CS_SETTINGS 		(AT91C_SPI_NCPHA | (AT91C_SPI_DLYBS & DATAFLASH_TCSS) | (AT91C_SPI_DLYBCT & DATAFLASH_TCHS) | ((MASTER_CLOCK / AT91C_SPI_CLK) << 8))
++
++/* ******************************************************************* */
++/* SDRAMC Settings                                                     */
++/*                                                                     */
++/* ******************************************************************* */
++#define AT91C_BASE_SDRAMC 	AT91C_BASE_SDRAMC0
++#define AT91C_EBI_SDRAM		AT91C_EBI0_SDRAM
++
++/* ******************************************************************* */
++/* BootStrap Settings                                                  */
++/*                                                                     */
++/* ******************************************************************* */
++#define AT91C_SPI_PCS_DATAFLASH		AT91C_SPI_PCS0_DATAFLASH	/* Boot on SPI NCS0 */
++
++#define IMG_ADDRESS 			0x4000			/* Image Address in DataFlash */
++#define	IMG_SIZE			0x40000			/* Image Size in DataFlash    */
++
++#define MACH_TYPE       		0x6AE       		/* USB-A9263 */
++#define JUMP_ADDR			0x23F00000		/* Final Jump Address 	      */
++
++/* ******************************************************************* */
++/* Application Settings                                                */
++/* ******************************************************************* */
++#define CFG_HW_INIT
++#define CFG_SDRAM
++#undef	CFG_DEBUG
++
++#define CFG_DATAFLASH
++
++#endif	/* _USB_A9263_H */
+diff --git a/board/usb_a9263/nandflash/Makefile b/board/usb_a9263/nandflash/Makefile
+new file mode 100644
+index 0000000..c453098
+--- /dev/null
++++ b/board/usb_a9263/nandflash/Makefile
+@@ -0,0 +1,117 @@
++# TODO: set this appropriately for your local toolchain
++#SHELL=C:\CYGWIN_REP\dwn_071004\bin\BASH.exe
++CROSS_COMPILE=arm-elf-
++
++TOOLCHAIN=gcc
++
++BOOTSTRAP_PATH=../../..
++
++# NandFlashBoot Configuration for USB-A9263
++
++# Target name (case sensitive!!!)
++TARGET=AT91SAM9263
++# Board name (case sensitive!!!)
++BOARD=usb_a9263
++# Link Address and Top_of_Memory
++LINK_ADDR=0x300000
++TOP_OF_MEMORY=0x314000
++# Name of current directory
++PROJECT=nandflash
++
++ifndef BOOT_NAME
++BOOT_NAME=$(PROJECT)_$(BOARD)
++endif
++
++INCL=./$(BOOTSTRAP_PATH)/board/$(BOARD)/$(PROJECT)
++
++ifeq ($(TOOLCHAIN), gcc)
++
++AS=$(CROSS_COMPILE)gcc
++CC=$(CROSS_COMPILE)gcc
++LD=$(CROSS_COMPILE)gcc
++NM= $(CROSS_COMPILE)nm
++SIZE=$(CROSS_COMPILE)size
++OBJCOPY=$(CROSS_COMPILE)objcopy
++OBJDUMP=$(CROSS_COMPILE)objdump
++CCFLAGS=-g -mcpu=arm9 -O0 -Wall -D$(TARGET) -D$(BOARD) -I$(INCL)
++ASFLAGS=-g -mcpu=arm9 -c -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
++
++# Linker flags.
++#  -Wl,...:     tell GCC to pass this to linker.
++#    -Map:      create map file
++#    --cref:    add cross reference to map file
++LDFLAGS+=-nostartfiles -nostdlib  -Wl,-Map=$(BOOT_NAME).map,--cref
++LDFLAGS+=-T $(BOOTSTRAP_PATH)/elf32-littlearm.lds -Ttext $(LINK_ADDR)
++OBJS=crt0_gnu.o
++
++endif
++
++OBJS+=\
++	$(BOARD).o \
++	main.o \
++	gpio.o \
++	pmc.o \
++	debug.o \
++	sdramc.o \
++	nandflash.o \
++	_udivsi3.o \
++	_umodsi3.o \
++	div0.o \
++	udiv.o \
++	string.o
++
++rebuild: clean all
++
++all: 	$(BOOT_NAME)
++
++ifeq ($(TOOLCHAIN), gcc)
++$(BOOT_NAME): $(OBJS)
++	$(LD) $(LDFLAGS) -n -o $(BOOT_NAME).elf $(OBJS)
++	$(OBJCOPY) --strip-debug --strip-unneeded $(BOOT_NAME).elf -O binary $(BOOT_NAME).bin
++endif
++	
++	
++$(BOARD).o: $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c -o $(BOARD).o
++
++main.o: $(BOOTSTRAP_PATH)/main.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/main.c -o main.o
++
++gpio.o: $(BOOTSTRAP_PATH)/driver/gpio.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/gpio.c -o gpio.o
++
++pmc.o:  $(BOOTSTRAP_PATH)/driver/pmc.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/pmc.c -o pmc.o
++
++debug.o: $(BOOTSTRAP_PATH)/driver/debug.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/debug.c -o debug.o
++
++sdramc.o:  $(BOOTSTRAP_PATH)/driver/sdramc.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/sdramc.c -o sdramc.o
++
++dataflash.o:  $(BOOTSTRAP_PATH)/driver/dataflash.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/dataflash.c -o dataflash.o
++
++nandflash.o:  $(BOOTSTRAP_PATH)/driver/nandflash.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/nandflash.c -o nandflash.o
++
++crt0_gnu.o:  $(BOOTSTRAP_PATH)/crt0_gnu.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/crt0_gnu.S -o crt0_gnu.o
++
++div0.o:  $(BOOTSTRAP_PATH)/lib/div0.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/div0.c -o div0.o
++
++string.o:  $(BOOTSTRAP_PATH)/lib/string.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/string.c -o string.o
++
++udiv.o:  $(BOOTSTRAP_PATH)/lib/udiv.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/udiv.c -o udiv.o
++
++_udivsi3.o:  $(BOOTSTRAP_PATH)/lib/_udivsi3.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_udivsi3.S -o _udivsi3.o
++
++_umodsi3.o:  $(BOOTSTRAP_PATH)/lib/_umodsi3.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_umodsi3.S -o _umodsi3.o
++
++clean:
++	rm -f *.o *.bin *.elf *.map
+diff --git a/board/usb_a9263/nandflash/usb-a9263.h b/board/usb_a9263/nandflash/usb-a9263.h
+new file mode 100644
+index 0000000..24e2cf1
+--- /dev/null
++++ b/board/usb_a9263/nandflash/usb-a9263.h
+@@ -0,0 +1,116 @@
++/* ----------------------------------------------------------------------------
++ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
++ * ----------------------------------------------------------------------------
++ * Copyright (c) 2006, Atmel Corporation
++
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ *
++ * - Redistributions of source code must retain the above copyright notice,
++ * this list of conditions and the disclaimer below.
++ *
++ * Atmel's name may not be used to endorse or promote products derived from
++ * this software without specific prior written permission.
++ *
++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ----------------------------------------------------------------------------
++ * File Name           : usb-a9263.h
++ * Object              :
++ * Creation            : GH Jun 28th 2012
++ *-----------------------------------------------------------------------------
++ */
++#ifndef _USB_A9263_H
++#define _USB_A9263_H
++
++/* ******************************************************************* */
++/* PMC Settings                                                        */
++/*                                                                     */
++/* The main oscillator is enabled as soon as possible in the c_startup */
++/* and MCK is switched on the main oscillator.                         */
++/* PLL initialization is done later in the hw_init() function          */
++/* ******************************************************************* */
++#define MASTER_CLOCK		(180000000/2)
++#define PLL_LOCK_TIMEOUT	1000000
++
++#define PLLA_SETTINGS	0x20593F06
++#define PLLB_SETTINGS	0x10483F0E
++
++/* Switch MCK on PLLA output PCK = PLLA = 2 * MCK */
++#define MCKR_SETTINGS		(AT91C_PMC_PRES_CLK | AT91C_PMC_MDIV_2)
++#define MCKR_CSS_SETTINGS	(AT91C_PMC_CSS_PLLA_CLK | MCKR_SETTINGS)
++
++/* ******************************************************************* */
++/* NandFlash Settings                                                  */
++/*                                                                     */
++/* ******************************************************************* */
++#define AT91C_SMARTMEDIA_BASE	0x40000000
++
++#define AT91_SMART_MEDIA_ALE    (1 << 21)	/* our ALE is AD21 */
++#define AT91_SMART_MEDIA_CLE    (1 << 22)	/* our CLE is AD22 */
++
++#define NAND_DISABLE_CE() do { *(volatile unsigned int *)AT91C_PIOD_SODR = AT91C_PIO_PD15;} while(0)
++#define NAND_ENABLE_CE()  do { *(volatile unsigned int *)AT91C_PIOD_CODR = AT91C_PIO_PD15;} while(0)
++#define NAND_WAIT_READY() while (!(*(volatile unsigned int *)AT91C_PIOA_PDSR & AT91C_PIO_PA22))
++
++/* ******************************************************************* */
++/* SDRAMC Settings                                                     */
++/*                                                                     */
++/* ******************************************************************* */
++#define AT91C_BASE_SDRAMC 	AT91C_BASE_SDRAMC0
++#define AT91C_EBI_SDRAM		AT91C_EBI0_SDRAM
++
++/* ******************************************************************** */
++/* SMC Chip Select 3 Timings for NandFlash for MASTER_CLOCK = 90000000. */
++/* Please refer to SMC section in AT91SAM9x datasheet to learn how 	*/
++/* to generate these values. 						*/
++/* ******************************************************************** */
++#define AT91C_SM_NWE_SETUP	(1 << 0)
++#define AT91C_SM_NCS_WR_SETUP	(0 << 8)
++#define AT91C_SM_NRD_SETUP	(1 << 16)
++#define AT91C_SM_NCS_RD_SETUP	(0 << 24)
++  
++#define AT91C_SM_NWE_PULSE 	(3 << 0)
++#define AT91C_SM_NCS_WR_PULSE	(3 << 8)
++#define AT91C_SM_NRD_PULSE	(3 << 16)
++#define AT91C_SM_NCS_RD_PULSE	(3 << 24)
++  
++#define AT91C_SM_NWE_CYCLE 	(5 << 0)
++#define AT91C_SM_NRD_CYCLE	(5 << 16)
++
++#define AT91C_SM_TDF	        (2 << 16)
++
++/* ******************************************************************* */
++/* BootStrap Settings                                                  */
++/*                                                                     */
++/* ******************************************************************* */
++#define IMG_ADDRESS 	0x20000		/* Image Address in NandFlash */
++#define	IMG_SIZE	0x40000		/* Image Size in NandFlash    */
++
++#define MACH_TYPE       0x6AE  		/* USB-A9263 */
++#define JUMP_ADDR	0x23F00000	/* Final Jump Address 	      */
++
++/* ******************************************************************* */
++/* Application Settings                                                */
++/* ******************************************************************* */
++#undef CFG_DEBUG
++#undef CFG_DATAFLASH
++
++#define CFG_NANDFLASH
++#undef	NANDFLASH_SMALL_BLOCKS	/* NANDFLASH_LARGE_BLOCKS used instead */
++
++#define CFG_HW_INIT
++#define CFG_SDRAM
++
++
++#endif	/* _USB_A9263_H */
+diff --git a/board/usb_a9263/usb_a9263.c b/board/usb_a9263/usb_a9263.c
+new file mode 100644
+index 0000000..5630f99
+--- /dev/null
++++ b/board/usb_a9263/usb_a9263.c
+@@ -0,0 +1,285 @@
++/* ----------------------------------------------------------------------------
++ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
++ * ----------------------------------------------------------------------------
++ * Copyright (c) 2006, Atmel Corporation
++
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ *
++ * - Redistributions of source code must retain the above copyright notice,
++ * this list of conditions and the disclaiimer below.
++ *
++ * Atmel's name may not be used to endorse or promote products derived from
++ * this software without specific prior written permission.
++ *
++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ----------------------------------------------------------------------------
++ * File Name           : usb_a9263.c
++ * Object              :
++ * Creation            : GH Jun 28th 2012
++ *-----------------------------------------------------------------------------
++ */
++#include "../../include/part.h"
++#include "../../include/gpio.h"
++#include "../../include/pmc.h"
++#include "../../include/debug.h"
++#include "../../include/sdramc.h"
++#include "../../include/main.h"
++#ifdef CFG_NANDFLASH
++#include "../../include/nandflash.h"
++#endif
++#ifdef CFG_DATAFLASH
++#include "../../include/dataflash.h"
++#endif
++
++static inline unsigned int get_cp15(void)
++{
++	unsigned int value;
++	__asm__("mrc p15, 0, %0, c1, c0, 0" : "=r" (value));
++	return value;
++}
++
++static inline void set_cp15(unsigned int value)
++{
++	__asm__("mcr p15, 0, %0, c1, c0, 0" : : "r" (value));
++}
++
++
++#ifdef CFG_HW_INIT
++/*---------------------------------------------------------------------------- */
++/* \fn    hw_init							       */
++/* \brief This function performs very low level HW initialization	       */
++/* This function is invoked as soon as possible during the c_startup	       */
++/* The bss segment must be initialized					       */
++/*---------------------------------------------------------------------------- */
++void hw_init(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc hw_pio[] = {
++#ifdef CFG_DEBUG
++		{"RXD", AT91C_PIN_PC(30), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"TXD", AT91C_PIN_PC(31), 0, PIO_DEFAULT, PIO_PERIPH_A},
++#endif
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Disable watchdog */
++	writel(AT91C_WDTC_WDDIS, AT91C_BASE_WDTC + WDTC_WDMR);
++
++	/* At this stage the main oscillator is supposed to be enabled
++	 * PCK = MCK = MOSC */
++
++	/* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */
++	pmc_cfg_plla(PLLA_SETTINGS, PLL_LOCK_TIMEOUT);
++
++	/* PCK = PLLA = 2 * MCK */
++	pmc_cfg_mck(MCKR_SETTINGS, PLL_LOCK_TIMEOUT);
++	/* Switch MCK on PLLA output */
++	pmc_cfg_mck(MCKR_CSS_SETTINGS, PLL_LOCK_TIMEOUT);
++
++
++	/* Configure PLLB */
++	pmc_cfg_pllb(PLLB_SETTINGS, PLL_LOCK_TIMEOUT);
++
++	/* Configure the PIO controller to output PCK0 */
++	pio_setup(hw_pio);
++
++	/* Configure the EBI0 Slave Slot Cycle to 64 */
++	writel( (readl((AT91C_BASE_MATRIX + MATRIX_SCFG4)) & ~0xFF) | 0x40, (AT91C_BASE_MATRIX + MATRIX_SCFG4));
++
++#ifdef CFG_DEBUG
++	/* Enable Debug messages on the DBGU */
++	dbg_init(BAUDRATE(MASTER_CLOCK, 115200));
++	dbg_print("Start AT91Bootstrap...\n\r");
++#endif /* CFG_DEBUG */
++
++#ifdef CFG_SDRAM
++	/* Initialize the matrix */
++	/* VDDIOMSEL = 1 -> Memories are 3.3V powered */
++	writel(readl(AT91C_BASE_CCFG + CCFG_EBI0CSA) | (1 << 16) | AT91C_EBI_CS1A_SDRAMC, AT91C_BASE_CCFG + CCFG_EBI0CSA);
++
++	/* Configure SDRAM Controller */
++	sdram_init(	AT91C_SDRAMC_NC_9  |
++				AT91C_SDRAMC_NR_13 |
++				AT91C_SDRAMC_CAS_2 |
++				AT91C_SDRAMC_NB_4_BANKS |
++				AT91C_SDRAMC_DBW_32_BITS |
++				AT91C_SDRAMC_TWR_2 |
++				AT91C_SDRAMC_TRC_7 |
++				AT91C_SDRAMC_TRP_2 |
++				AT91C_SDRAMC_TRCD_2 |
++				AT91C_SDRAMC_TRAS_5 |
++				AT91C_SDRAMC_TXSR_8,		/* Control Register       */
++				(MASTER_CLOCK * 7)/1000000,	/* Refresh Timer Register */
++				AT91C_SDRAMC_MD_SDRAM);		/* SDRAM (no low power)   */ 
++#endif	/* CFG_SDRAM */
++}
++#endif /* CFG_HW_INIT */
++
++
++#ifdef CFG_SDRAM
++//*----------------------------------------------------------------------------
++//* \fn    sdramc_hw_init
++//* \brief This function performs SDRAMC HW initialization
++//*----------------------------------------------------------------------------*/
++void sdramc_hw_init(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc sdramc_pio[] = {
++		{"D16", AT91C_PIN_PD(16), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D17", AT91C_PIN_PD(17), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D18", AT91C_PIN_PD(18), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D19", AT91C_PIN_PD(19), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D20", AT91C_PIN_PD(20), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D21", AT91C_PIN_PD(21), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D22", AT91C_PIN_PD(22), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D23", AT91C_PIN_PD(23), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D24", AT91C_PIN_PD(24), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D25", AT91C_PIN_PD(25), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D26", AT91C_PIN_PD(26), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D27", AT91C_PIN_PD(27), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D28", AT91C_PIN_PD(28), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D29", AT91C_PIN_PD(29), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D30", AT91C_PIN_PD(30), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D31", AT91C_PIN_PD(31), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the SDRAMC PIO controller */
++	pio_setup(sdramc_pio);
++}
++#endif
++
++#ifdef CFG_DATAFLASH
++/*------------------------------------------------------------------------------*/
++/* \fn    df_recovery								*/
++/* \brief This function erases DataFlash Page 0 if USER PB is pressed 		*/
++/*        during boot sequence							*/
++/*------------------------------------------------------------------------------*/
++void df_recovery(AT91PS_DF pDf)
++{
++#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS0_DATAFLASH)
++	/* Configure PIOs */
++	const struct pio_desc usrpb_pio[] = {
++		{"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the PIO controller */
++	writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
++	pio_setup(usrpb_pio);
++	
++	/* If USER PB is pressed during Boot sequence */
++	/* Erase NandFlash block 0*/
++	if ( !pio_get_value(AT91C_PIN_PB(10)) )
++		df_page_erase(pDf, 0);
++#endif
++}
++/*------------------------------------------------------------------------------*/
++/* \fn    df_hw_init								*/
++/* \brief This function performs DataFlash HW initialization			*/
++/*------------------------------------------------------------------------------*/
++void df_hw_init(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc df_pio[] = {
++		{"MISO",  AT91C_PIN_PA(0), 0, PIO_DEFAULT, PIO_PERIPH_B},
++		{"MOSI",  AT91C_PIN_PA(1), 0, PIO_DEFAULT, PIO_PERIPH_B},
++		{"SPCK",  AT91C_PIN_PA(2), 0, PIO_DEFAULT, PIO_PERIPH_B},
++		{"NPCS0", AT91C_PIN_PA(5), 0, PIO_DEFAULT, PIO_PERIPH_B},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the PIO controller */
++	pio_setup(df_pio);
++}
++#endif /* CFG_DATAFLASH */
++
++
++#ifdef CFG_NANDFLASH
++/*------------------------------------------------------------------------------*/
++/* \fn    nand_recovery								*/
++/* \brief This function erases NandFlash Block 0 if USER PB is pressed 		*/
++/*        during boot sequence							*/
++/*------------------------------------------------------------------------------*/
++static void nand_recovery(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc usrpb_pio[] = {
++		{"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the PIO controller */
++	writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
++	pio_setup(usrpb_pio);
++	
++	/* If USER PB is pressed during Boot sequence */
++	/* Erase NandFlash block 0*/
++	if (!pio_get_value(AT91C_PIN_PB(10)) )
++		AT91F_NandEraseBlock0();
++}
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_hw_init							*/
++/* \brief NandFlash HW init							*/
++/*------------------------------------------------------------------------------*/
++void nandflash_hw_init(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc nand_pio[] = {
++		{"RDY_BSY", AT91C_PIN_PA(22), 0, PIO_PULLUP, PIO_INPUT},
++		{"NANDCS",  AT91C_PIN_PD(15), 0, PIO_PULLUP, PIO_OUTPUT},
++		{(char *) 0, 0, 0,  PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Setup Smart Media, first enable the address range of CS3 in HMATRIX user interface */
++	writel(readl(AT91C_BASE_CCFG + CCFG_EBI0CSA) | AT91C_EBI_CS3A_SM, AT91C_BASE_CCFG + CCFG_EBI0CSA);
++		    
++	/* Configure SMC CS3 */
++ 	writel((AT91C_SM_NWE_SETUP | AT91C_SM_NCS_WR_SETUP | AT91C_SM_NRD_SETUP | AT91C_SM_NCS_RD_SETUP), AT91C_BASE_SMC0 + SMC_SETUP3);
++  	writel((AT91C_SM_NWE_PULSE | AT91C_SM_NCS_WR_PULSE | AT91C_SM_NRD_PULSE | AT91C_SM_NCS_RD_PULSE), AT91C_BASE_SMC0 + SMC_PULSE3);
++	writel((AT91C_SM_NWE_CYCLE | AT91C_SM_NRD_CYCLE)						, AT91C_BASE_SMC0 + SMC_CYCLE3);
++	writel((AT91C_SMC_READMODE | AT91C_SMC_WRITEMODE | AT91C_SMC_NWAITM_NWAIT_DISABLE | 
++  		AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS | AT91C_SM_TDF)						, AT91C_BASE_SMC0 + SMC_CTRL3);
++
++	/* Configure the PIO controller */
++	writel((1 << AT91C_ID_PIOA), PMC_PCER + AT91C_BASE_PMC);
++	writel((1 << AT91C_ID_PIOCDE), PMC_PCER + AT91C_BASE_PMC);
++
++	pio_setup(nand_pio);
++
++	nand_recovery();
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_cfg_16bits_dbw_init						*/
++/* \brief Configure SMC in 16 bits mode						*/
++/*------------------------------------------------------------------------------*/
++void nandflash_cfg_16bits_dbw_init(void)
++{
++	writel(readl(AT91C_BASE_SMC0 + SMC_CTRL3) | AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS, AT91C_BASE_SMC0 + SMC_CTRL3);
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_cfg_8bits_dbw_init						*/
++/* \brief Configure SMC in 8 bits mode						*/
++/*------------------------------------------------------------------------------*/
++void nandflash_cfg_8bits_dbw_init(void)
++{
++	writel((readl(AT91C_BASE_SMC0 + SMC_CTRL3) & ~(AT91C_SMC_DBW)) | AT91C_SMC_DBW_WIDTH_EIGTH_BITS, AT91C_BASE_SMC0 + SMC_CTRL3);
++}
++
++#endif /* #ifdef CFG_NANDFLASH */
++
++
+diff --git a/crt0_gnu.S b/crt0_gnu.S
+index 042b617..002feef 100644
+--- a/crt0_gnu.S
++++ b/crt0_gnu.S
+@@ -106,6 +106,13 @@ _relocate_to_sram:
+ #endif /* CFG_NORFLASH */
+ 
+ _setup_clocks:
++/* Test if main osc is bypassed */
++	ldr 	r0,=AT91C_PMC_MOR
++	ldr 	r1, [r0]
++	ldr 	r2,=AT91C_CKGR_OSCBYPASS 
++	ands 	r1, r1, r2
++	bne	_init_data	/* branch if OSCBYPASS=1 */
++
+ /* Test if main oscillator is enabled */
+ 	ldr 	r0,=AT91C_PMC_SR
+ 	ldr 	r1, [r0]
+diff --git a/driver/dataflash.c b/driver/dataflash.c
+index e28e49e..4de295a 100644
+--- a/driver/dataflash.c
++++ b/driver/dataflash.c
+@@ -293,14 +293,14 @@ static int df_init (AT91PS_DF pDf)
+ 			pDf->dfDescription.pages_size = 264;
+ 			pDf->dfDescription.page_offset = 9;
+ 			break;
+-
++*/
+ 		case AT45DB021B:
+ 			pDf->dfDescription.pages_number = 1024;
+ 			pDf->dfDescription.pages_size = 264;
+ 			pDf->dfDescription.page_offset = 9;
+ 			break;
+ 
+-		case AT45DB041B:
++/*		case AT45DB041B:
+ 			pDf->dfDescription.pages_number = 2048;
+ 			pDf->dfDescription.pages_size = 264;
+ 			pDf->dfDescription.page_offset = 9;
+@@ -373,7 +373,7 @@ int load_df(unsigned int pcs, unsigned int img_addr, unsigned int img_size, unsi
+     if (!df_init(pDf))
+         return -1;
+ 
+-#if defined(AT91SAM9260) || defined(AT91SAM9XE) || defined(AT91SAM9G20)
++#if defined(AT91SAM9260) || defined(AT91SAM9263) || defined(AT91SAM9XE) || defined(AT91SAM9G20)
+     /* Test if a button has been pressed or not */
+     /* Erase Page 0 to avoid infinite loop */
+     df_recovery(pDf);
+diff --git a/include/part.h b/include/part.h
+index ba5985a..a1863d0 100644
+--- a/include/part.h
++++ b/include/part.h
+@@ -61,7 +61,11 @@
+ 
+ #ifdef AT91SAM9263
+ #include "AT91SAM9263_inc.h"
+-#include "at91sam9263ek.h"
++	#ifdef at91sam9263ek
++	#include "at91sam9263ek.h"
++	#elif usb_a9263
++	#include "usb-a9263.h"
++	#endif
+ #endif
+ 
+ #ifdef AT91CAP9
+-- 
+1.5.6.3
+

board/calao/usb-a9263/linux-3.4.4.config

@@ -0,0 +1,102 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_AT91=y
+CONFIG_ARCH_AT91SAM9263=y
+CONFIG_MACH_USB_A9263=y
+CONFIG_AT91_SLOW_CLOCK=y
+# CONFIG_ARM_THUMB is not set
+CONFIG_AEABI=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
+CONFIG_FPE_NWFPE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_SPI=y
+CONFIG_SPI_ATMEL=y
+# CONFIG_HWMON is not set
+# CONFIG_USB_HID is not set
+CONFIG_USB=y
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_MON=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_EXT2_FS=y
+CONFIG_FUSE_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_XATTR=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_LL=y

board/calao/usb-a9g20-lpw/at91bootstrap-1.16-usb-a9g20-lpw.patch

@@ -0,0 +1,610 @@
+From 8d84757d5170969e8bdfebc7951f43c5aa2b05fd Mon Sep 17 00:00:00 2001
+From: Gregory Hermant <gregory.hermant@calao-systems.com>
+Date: Fri, 6 Jul 2012 16:32:47 +0200
+Subject: [PATCH] Add support for the Calao-systems USB-A9G20-LPW
+
+
+Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
+---
+ board/usb_a9g20_lpw/nandflash/Makefile        |  121 ++++++++++
+ board/usb_a9g20_lpw/nandflash/usb-a9g20-lpw.h |  112 +++++++++
+ board/usb_a9g20_lpw/usb_a9g20_lpw.c           |  303 +++++++++++++++++++++++++
+ crt0_gnu.S                                    |    7 +
+ include/part.h                                |    6 +-
+ 5 files changed, 548 insertions(+), 1 deletions(-)
+ create mode 100644 board/usb_a9g20_lpw/nandflash/Makefile
+ create mode 100644 board/usb_a9g20_lpw/nandflash/usb-a9g20-lpw.h
+ create mode 100644 board/usb_a9g20_lpw/usb_a9g20_lpw.c
+
+diff --git a/board/usb_a9g20_lpw/nandflash/Makefile b/board/usb_a9g20_lpw/nandflash/Makefile
+new file mode 100644
+index 0000000..8c9d99a
+--- /dev/null
++++ b/board/usb_a9g20_lpw/nandflash/Makefile
+@@ -0,0 +1,121 @@
++# TODO: set this appropriately for your local toolchain
++ifndef ERASE_FCT
++ERASE_FCT=rm -f
++endif
++ifndef CROSS_COMPILE
++CROSS_COMPILE=arm-elf-
++endif
++
++TOOLCHAIN=gcc
++
++BOOTSTRAP_PATH=../../..
++
++# NandFlashBoot Configuration for USB-A9G20-LPW
++
++# Target name (case sensitive!!!)
++TARGET=AT91SAM9G20
++# Board name (case sensitive!!!)
++BOARD=usb_a9g20_lpw
++# Link Address and Top_of_Memory
++LINK_ADDR=0x200000
++TOP_OF_MEMORY=0x301000
++# Name of current directory
++PROJECT=nandflash
++
++ifndef BOOT_NAME
++BOOT_NAME=$(PROJECT)_$(BOARD)
++endif
++
++INCL=./$(BOOTSTRAP_PATH)/board/$(BOARD)/$(PROJECT)
++
++ifeq ($(TOOLCHAIN), gcc)
++
++AS=$(CROSS_COMPILE)gcc
++CC=$(CROSS_COMPILE)gcc
++LD=$(CROSS_COMPILE)gcc
++NM= $(CROSS_COMPILE)nm
++SIZE=$(CROSS_COMPILE)size
++OBJCOPY=$(CROSS_COMPILE)objcopy
++OBJDUMP=$(CROSS_COMPILE)objdump
++CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL)
++ASFLAGS=-g -mcpu=arm926ej-s -c -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
++
++# Linker flags.
++#  -Wl,...:     tell GCC to pass this to linker.
++#    -Map:      create map file
++#    --cref:    add cross reference to map file
++LDFLAGS+=-nostartfiles -nostdlib -Wl,-Map=$(BOOT_NAME).map,--cref
++LDFLAGS+=-T $(BOOTSTRAP_PATH)/elf32-littlearm.lds -Ttext $(LINK_ADDR)
++OBJS=crt0_gnu.o
++
++endif
++
++OBJS+=\
++	$(BOARD).o \
++	main.o \
++	gpio.o \
++	pmc.o \
++	debug.o \
++	sdramc.o \
++	nandflash.o \
++	_udivsi3.o \
++	_umodsi3.o \
++	div0.o \
++	udiv.o \
++	string.o
++
++rebuild: clean all
++
++all: 	$(BOOT_NAME)
++
++ifeq ($(TOOLCHAIN), gcc)
++$(BOOT_NAME): $(OBJS)
++	$(LD) $(LDFLAGS) -n -o $(BOOT_NAME).elf $(OBJS)
++	$(OBJCOPY) --strip-debug --strip-unneeded $(BOOT_NAME).elf -O binary $(BOOT_NAME).bin
++endif
++
++
++$(BOARD).o: $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c -o $(BOARD).o
++
++main.o: $(BOOTSTRAP_PATH)/main.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/main.c -o main.o
++
++gpio.o: $(BOOTSTRAP_PATH)/driver/gpio.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/gpio.c -o gpio.o
++
++pmc.o:  $(BOOTSTRAP_PATH)/driver/pmc.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/pmc.c -o pmc.o
++
++debug.o: $(BOOTSTRAP_PATH)/driver/debug.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/debug.c -o debug.o
++
++sdramc.o:  $(BOOTSTRAP_PATH)/driver/sdramc.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/sdramc.c -o sdramc.o
++
++dataflash.o:  $(BOOTSTRAP_PATH)/driver/dataflash.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/dataflash.c -o dataflash.o
++
++nandflash.o:  $(BOOTSTRAP_PATH)/driver/nandflash.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/nandflash.c -o nandflash.o
++
++crt0_gnu.o:  $(BOOTSTRAP_PATH)/crt0_gnu.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/crt0_gnu.S -o crt0_gnu.o
++
++div0.o:  $(BOOTSTRAP_PATH)/lib/div0.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/div0.c -o div0.o
++
++string.o:  $(BOOTSTRAP_PATH)/lib/string.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/string.c -o string.o
++
++udiv.o:  $(BOOTSTRAP_PATH)/lib/udiv.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/udiv.c -o udiv.o
++
++_udivsi3.o:  $(BOOTSTRAP_PATH)/lib/_udivsi3.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_udivsi3.S -o _udivsi3.o
++
++_umodsi3.o:  $(BOOTSTRAP_PATH)/lib/_umodsi3.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_umodsi3.S -o _umodsi3.o
++
++clean:
++	$(ERASE_FCT) *.o *.bin *.elf *.map
+diff --git a/board/usb_a9g20_lpw/nandflash/usb-a9g20-lpw.h b/board/usb_a9g20_lpw/nandflash/usb-a9g20-lpw.h
+new file mode 100644
+index 0000000..c0bdc6e
+--- /dev/null
++++ b/board/usb_a9g20_lpw/nandflash/usb-a9g20-lpw.h
+@@ -0,0 +1,112 @@
++/* ----------------------------------------------------------------------------
++ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
++ * ----------------------------------------------------------------------------
++ * Copyright (c) 2008, Atmel Corporation
++
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ *
++ * - Redistributions of source code must retain the above copyright notice,
++ * this list of conditions and the disclaimer below.
++ *
++ * Atmel's name may not be used to endorse or promote products derived from
++ * this software without specific prior written permission.
++ *
++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ----------------------------------------------------------------------------
++ * File Name           : usb-a9g20-lpw.h
++ * Object              :
++ * Creation            : GH July 6th 2012
++ *-----------------------------------------------------------------------------
++ */
++#ifndef _USB_A9G20_LPW_H
++#define _USB_A9G20_LPW_H
++
++/* ******************************************************************* */
++/* PMC Settings                                                        */
++/*                                                                     */
++/* The main oscillator is enabled as soon as possible in the c_startup */
++/* and MCK is switched on the main oscillator.                         */
++/* PLL initialization is done later in the hw_init() function          */
++/* ******************************************************************* */
++#define MASTER_CLOCK		(133000000)
++#define PLL_LOCK_TIMEOUT	1000000
++
++/* Set PLLA to 798Mhz */
++#define PLLA_SETTINGS	0x20843F02
++#define PLLB_SETTINGS	0x100F3F02
++
++/* Switch MCK on PLLA output PCK = PLLA/2 = 3 * MCK */
++#define MCKR_SETTINGS		0x1300
++#define MCKR_CSS_SETTINGS	(AT91C_PMC_CSS_PLLA_CLK | MCKR_SETTINGS)
++
++/* ******************************************************************* */
++/* NandFlash Settings                                                  */
++/*                                                                     */
++/* ******************************************************************* */
++#define AT91C_SMARTMEDIA_BASE	0x40000000
++
++#define AT91_SMART_MEDIA_ALE    (1 << 21)	/* our ALE is AD21 */
++#define AT91_SMART_MEDIA_CLE    (1 << 22)	/* our CLE is AD22 */
++
++#define NAND_DISABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_SODR = AT91C_PIO_PC14;} while(0)
++#define NAND_ENABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_CODR = AT91C_PIO_PC14;} while(0)
++
++#define NAND_WAIT_READY() while (!(*(volatile unsigned int *)AT91C_PIOC_PDSR & AT91C_PIO_PC13))
++
++
++/* ******************************************************************** */
++/* SMC Chip Select 3 Timings for NandFlash for MASTER_CLOCK = 133000000.*/
++/* Please refer to SMC section in AT91SAM9 datasheet to learn how 	*/
++/* to generate these values. 						*/
++/* ******************************************************************** */
++#define AT91C_SM_NWE_SETUP	(2 << 0)
++#define AT91C_SM_NCS_WR_SETUP	(0 << 8)
++#define AT91C_SM_NRD_SETUP	(2 << 16)
++#define AT91C_SM_NCS_RD_SETUP	(0 << 24)
++  
++#define AT91C_SM_NWE_PULSE 	(4 << 0)
++#define AT91C_SM_NCS_WR_PULSE	(4 << 8)
++#define AT91C_SM_NRD_PULSE	(4 << 16)
++#define AT91C_SM_NCS_RD_PULSE	(4 << 24)
++  
++#define AT91C_SM_NWE_CYCLE 	(7 << 0)
++#define AT91C_SM_NRD_CYCLE	(7 << 16)
++
++#define AT91C_SM_TDF	        (3 << 16)
++
++/* ******************************************************************* */
++/* BootStrap Settings                                                  */
++/*                                                                     */
++/* ******************************************************************* */
++#define IMG_ADDRESS 		0x20000			/* Image Address in NandFlash */
++#define	IMG_SIZE		0x40000			/* Image Size in NandFlash */
++
++#define MACH_TYPE		0x731			/* USB-A9G20 */
++#define JUMP_ADDR		0x23F00000		/* Final Jump Address */
++
++/* ******************************************************************* */
++/* Application Settings                                                */
++/* ******************************************************************* */
++#undef CFG_DEBUG
++#undef CFG_DATAFLASH
++
++#define CFG_NANDFLASH
++#undef	NANDFLASH_SMALL_BLOCKS	/* NANDFLASH_LARGE_BLOCKS used instead */
++#undef  CFG_NANDFLASH_RECOVERY
++
++#define	CFG_SDRAM
++#define	CFG_HW_INIT
++
++#endif	/* _USB_A9G20_LPW_H */
+diff --git a/board/usb_a9g20_lpw/usb_a9g20_lpw.c b/board/usb_a9g20_lpw/usb_a9g20_lpw.c
+new file mode 100644
+index 0000000..c372307
+--- /dev/null
++++ b/board/usb_a9g20_lpw/usb_a9g20_lpw.c
+@@ -0,0 +1,303 @@
++/* ----------------------------------------------------------------------------
++ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
++ * ----------------------------------------------------------------------------
++ * Copyright (c) 2008, Atmel Corporation
++
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ *
++ * - Redistributions of source code must retain the above copyright notice,
++ * this list of conditions and the disclaimer below.
++ *
++ * Atmel's name may not be used to endorse or promote products derived from
++ * this software without specific prior written permission.
++ *
++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ----------------------------------------------------------------------------
++ * File Name           : usb_a9g20_lpw.c
++ * Object              :
++ * Creation            : GH July 6th 2012
++ *-----------------------------------------------------------------------------
++ */
++#include "../../include/part.h"
++#include "../../include/gpio.h"
++#include "../../include/pmc.h"
++#include "../../include/debug.h"
++#include "../../include/sdramc.h"
++#include "../../include/main.h"
++#ifdef CFG_NANDFLASH
++#include "../../include/nandflash.h"
++#endif
++#ifdef CFG_DATAFLASH
++#include "../../include/dataflash.h"
++#endif
++
++static inline unsigned int get_cp15(void)
++{
++	unsigned int value;
++	__asm__("mrc p15, 0, %0, c1, c0, 0" : "=r" (value));
++	return value;
++}
++
++static inline void set_cp15(unsigned int value)
++{
++	__asm__("mcr p15, 0, %0, c1, c0, 0" : : "r" (value));
++}
++
++#ifdef CFG_HW_INIT
++/*----------------------------------------------------------------------------*/
++/* \fn    hw_init							      */
++/* \brief This function performs very low level HW initialization	      */
++/* This function is invoked as soon as possible during the c_startup	      */
++/* The bss segment must be initialized					      */
++/*----------------------------------------------------------------------------*/
++void hw_init(void)
++{
++	unsigned int cp15;
++	
++	/* Configure PIOs */
++	const struct pio_desc hw_pio[] = {
++#ifdef CFG_DEBUG
++		{"RXD", AT91C_PIN_PB(14), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"TXD", AT91C_PIN_PB(15), 0, PIO_DEFAULT, PIO_PERIPH_A},
++#endif
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Disable watchdog */
++	writel(AT91C_WDTC_WDDIS, AT91C_BASE_WDTC + WDTC_WDMR);
++
++	/* At this stage the main oscillator is supposed to be enabled
++	 * PCK = MCK = MOSC */
++	writel(0x00, AT91C_BASE_PMC + PMC_PLLICPR);
++
++	/* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */
++	pmc_cfg_plla(PLLA_SETTINGS, PLL_LOCK_TIMEOUT);
++
++	/* PCK = PLLA/2 = 3 * MCK */
++	pmc_cfg_mck(MCKR_SETTINGS, PLL_LOCK_TIMEOUT);
++	/* Switch MCK on PLLA output */
++	pmc_cfg_mck(MCKR_CSS_SETTINGS, PLL_LOCK_TIMEOUT);
++
++	/* Configure PLLB */
++	pmc_cfg_pllb(PLLB_SETTINGS, PLL_LOCK_TIMEOUT);
++
++	/* Configure CP15 */
++	cp15 = get_cp15();
++	cp15 |= I_CACHE;
++	set_cp15(cp15);
++
++	/* Configure the PIO controller */
++	pio_setup(hw_pio);
++
++	/* Configure the EBI Slave Slot Cycle to 64 */
++	writel((readl((AT91C_BASE_MATRIX + MATRIX_SCFG3)) & ~0xFF) | 0x40, (AT91C_BASE_MATRIX + MATRIX_SCFG3));
++
++#ifdef CFG_DEBUG
++	/* Enable Debug messages on the DBGU */
++	dbg_init(BAUDRATE(MASTER_CLOCK, 115200));
++
++	dbg_print("Start AT91Bootstrap...\n\r");
++#endif /* CFG_DEBUG */
++
++#ifdef CFG_SDRAM
++	/* Initialize the matrix (VDDIOSEL=0: memory voltage = 1.8V ) */
++	writel((readl(AT91C_BASE_CCFG + CCFG_EBICSA) & ~0x00010000) | AT91C_EBI_CS1A_SDRAMC , AT91C_BASE_CCFG + CCFG_EBICSA);
++
++	/* Configure SDRAM Controller */
++	sdram_init(	AT91C_SDRAMC_NC_9  |
++				AT91C_SDRAMC_NR_13 |
++				AT91C_SDRAMC_CAS_3 |
++				AT91C_SDRAMC_NB_4_BANKS |
++				AT91C_SDRAMC_DBW_32_BITS |
++				AT91C_SDRAMC_TWR_3 |
++				AT91C_SDRAMC_TRC_9 |
++				AT91C_SDRAMC_TRP_3 |
++				AT91C_SDRAMC_TRCD_3 |
++				AT91C_SDRAMC_TRAS_6 |
++				AT91C_SDRAMC_TXSR_10,		/* Control Register */
++				(MASTER_CLOCK * 7)/1000000,	/* Refresh Timer Register */
++                                AT91C_SDRAMC_MD_SDRAM);         /* SDRAM (no low power)   */
++
++#endif /* CFG_SDRAM */
++}
++#endif /* CFG_HW_INIT */
++
++#ifdef CFG_SDRAM
++/*------------------------------------------------------------------------------*/
++/* \fn    sdramc_hw_init							*/
++/* \brief This function performs SDRAMC HW initialization			*/
++/*------------------------------------------------------------------------------*/
++void sdramc_hw_init(void)
++{
++	/* Configure PIOs */
++/*	const struct pio_desc sdramc_pio[] = {
++		{"D16", AT91C_PIN_PC(16), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D17", AT91C_PIN_PC(17), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D18", AT91C_PIN_PC(18), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D19", AT91C_PIN_PC(19), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D20", AT91C_PIN_PC(20), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D21", AT91C_PIN_PC(21), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D22", AT91C_PIN_PC(22), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D23", AT91C_PIN_PC(23), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D24", AT91C_PIN_PC(24), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D25", AT91C_PIN_PC(25), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D26", AT91C_PIN_PC(26), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D27", AT91C_PIN_PC(27), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D28", AT91C_PIN_PC(28), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D29", AT91C_PIN_PC(29), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D30", AT91C_PIN_PC(30), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D31", AT91C_PIN_PC(31), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++*/
++	/* Configure the SDRAMC PIO controller to output PCK0 */
++/*	pio_setup(sdramc_pio); */
++
++	writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_ASR(0));
++	writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_PDR(0));
++
++}
++#endif /* CFG_SDRAM */
++
++#ifdef CFG_DATAFLASH
++
++/*------------------------------------------------------------------------------*/
++/* \fn    df_recovery								*/
++/* \brief This function erases DataFlash Page 0 if USR PB is pressed 		*/
++/*        during boot sequence							*/
++/*------------------------------------------------------------------------------*/
++void df_recovery(AT91PS_DF pDf)
++{
++#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS1_DATAFLASH)
++	/* Configure PIOs */
++	const struct pio_desc usrpb[] = {
++		{"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the PIO controller */
++	writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
++	pio_setup(usrpb);
++	
++	/* If USR PB is pressed during Boot sequence */
++	/* Erase NandFlash block 0*/
++	if ( !pio_get_value(AT91C_PIN_PB(10)) )
++		df_page_erase(pDf, 0);
++#endif
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    df_hw_init								*/
++/* \brief This function performs DataFlash HW initialization			*/
++/*------------------------------------------------------------------------------*/
++void df_hw_init(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc df_pio[] = {
++		{"MISO",  AT91C_PIN_PA(0), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"MOSI",  AT91C_PIN_PA(1), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"SPCK",  AT91C_PIN_PA(2), 0, PIO_DEFAULT, PIO_PERIPH_A},
++#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS0_DATAFLASH)
++		{"NPCS0", AT91C_PIN_PA(3), 0, PIO_DEFAULT, PIO_PERIPH_A},
++#endif
++#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS1_DATAFLASH)
++		{"NPCS1", AT91C_PIN_PC(11), 0, PIO_DEFAULT, PIO_PERIPH_B},
++#endif
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the PIO controller */
++	pio_setup(df_pio);
++}
++#endif /* CFG_DATAFLASH */
++
++
++
++#ifdef CFG_NANDFLASH
++/*------------------------------------------------------------------------------*/
++/* \fn    nand_recovery						*/
++/* \brief This function erases NandFlash Block 0 if USER PB is pressed 		*/
++/*        during boot sequence							*/
++/*------------------------------------------------------------------------------*/
++#ifdef CFG_NANDFLASH_RECOVERY
++static void nand_recovery(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc usrpb[] = {
++		{"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the PIO controller */
++	writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
++	pio_setup(usrpb);
++	
++	/* If USER PB is pressed during Boot sequence */
++	/* Erase NandFlash block 0*/
++	if (!pio_get_value(AT91C_PIN_PB(10)) )
++		AT91F_NandEraseBlock0();
++}
++#else
++static void nand_recovery(void) {}
++#endif
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_hw_init							*/
++/* \brief NandFlash HW init							*/
++/*------------------------------------------------------------------------------*/
++void nandflash_hw_init(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc nand_pio[] = {
++		{"RDY_BSY", AT91C_PIN_PC(13), 0, PIO_PULLUP, PIO_INPUT},
++		{"NANDCS",  AT91C_PIN_PC(14), 0, PIO_PULLUP, PIO_OUTPUT},
++		{(char *) 0, 0, 0,  PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Setup Smart Media, first enable the address range of CS3 in HMATRIX user interface */
++	writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) | AT91C_EBI_CS3A_SM, AT91C_BASE_CCFG + CCFG_EBICSA);
++		    
++	/* Configure SMC CS3 */
++ 	writel((AT91C_SM_NWE_SETUP | AT91C_SM_NCS_WR_SETUP | AT91C_SM_NRD_SETUP | AT91C_SM_NCS_RD_SETUP), AT91C_BASE_SMC + SMC_SETUP3);
++  	writel((AT91C_SM_NWE_PULSE | AT91C_SM_NCS_WR_PULSE | AT91C_SM_NRD_PULSE | AT91C_SM_NCS_RD_PULSE), AT91C_BASE_SMC + SMC_PULSE3);
++	writel((AT91C_SM_NWE_CYCLE | AT91C_SM_NRD_CYCLE)						, AT91C_BASE_SMC + SMC_CYCLE3);
++	writel((AT91C_SMC_READMODE | AT91C_SMC_WRITEMODE | AT91C_SMC_NWAITM_NWAIT_DISABLE | 
++  		AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS | AT91C_SM_TDF)						, AT91C_BASE_SMC + SMC_CTRL3);
++
++	/* Configure the PIO controller */
++	writel((1 << AT91C_ID_PIOC), PMC_PCER + AT91C_BASE_PMC);
++	pio_setup(nand_pio);
++	
++	nand_recovery();
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_cfg_16bits_dbw_init						*/
++/* \brief Configure SMC in 16 bits mode						*/
++/*------------------------------------------------------------------------------*/
++void nandflash_cfg_16bits_dbw_init(void)
++{
++	writel(readl(AT91C_BASE_SMC + SMC_CTRL3) | AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS, AT91C_BASE_SMC + SMC_CTRL3);
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_cfg_8bits_dbw_init						*/
++/* \brief Configure SMC in 8 bits mode						*/
++/*------------------------------------------------------------------------------*/
++void nandflash_cfg_8bits_dbw_init(void)
++{
++	writel((readl(AT91C_BASE_SMC + SMC_CTRL3) & ~(AT91C_SMC_DBW)) | AT91C_SMC_DBW_WIDTH_EIGTH_BITS, AT91C_BASE_SMC + SMC_CTRL3);
++}
++
++#endif /* #ifdef CFG_NANDFLASH */
+diff --git a/crt0_gnu.S b/crt0_gnu.S
+index 042b617..002feef 100644
+--- a/crt0_gnu.S
++++ b/crt0_gnu.S
+@@ -106,6 +106,13 @@ _relocate_to_sram:
+ #endif /* CFG_NORFLASH */
+ 
+ _setup_clocks:
++/* Test if main osc is bypassed */
++	ldr 	r0,=AT91C_PMC_MOR
++	ldr 	r1, [r0]
++	ldr 	r2,=AT91C_CKGR_OSCBYPASS 
++	ands 	r1, r1, r2
++	bne	_init_data	/* branch if OSCBYPASS=1 */
++
+ /* Test if main oscillator is enabled */
+ 	ldr 	r0,=AT91C_PMC_SR
+ 	ldr 	r1, [r0]
+diff --git a/include/part.h b/include/part.h
+index ba5985a..1d7392a 100644
+--- a/include/part.h
++++ b/include/part.h
+@@ -46,7 +46,11 @@
+ 
+ #ifdef AT91SAM9G20
+ #include "AT91SAM9260_inc.h"
+-#include "at91sam9g20ek.h"
++	#ifdef at91sam9g20ek
++	#include "at91sam9g20ek.h"
++	#elif usb_a9g20_lpw
++	#include "usb-a9g20-lpw.h"
++	#endif
+ #endif
+ 
+ #ifdef AT91SAM9261
+-- 
+1.5.6.3
+

board/calao/usb-a9g20-lpw/barebox-2012.07.0-usb-a9g20-lpw.patch

@@ -0,0 +1,12 @@
+diff --git a/arch/arm/configs/usb_a9g20_defconfig b/arch/arm/configs/usb_a9g20_defconfig
+index 30bf380..7716e0e 100644
+--- a/arch/arm/configs/usb_a9g20_defconfig
++++ b/arch/arm/configs/usb_a9g20_defconfig
+@@ -15,6 +15,7 @@ CONFIG_HUSH_FANCY_PROMPT=y
+ CONFIG_CMDLINE_EDITING=y
+ CONFIG_AUTO_COMPLETE=y
+ CONFIG_MENU=y
++# CONFIG_ERRNO_MESSAGES is not set
+ # CONFIG_CONSOLE_ACTIVATE_FIRST is not set
+ CONFIG_CONSOLE_ACTIVATE_ALL=y
+ CONFIG_PARTITION=y

board/calao/usb-a9g20-lpw/linux-3.4.4.config

@@ -0,0 +1,105 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_AT91=y
+CONFIG_ARCH_AT91SAM9G20=y
+CONFIG_MACH_USB_A9G20=y
+CONFIG_AT91_SLOW_CLOCK=y
+# CONFIG_ARM_THUMB is not set
+CONFIG_AEABI=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
+CONFIG_FPE_NWFPE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_GPIO=y
+CONFIG_SPI=y
+CONFIG_SPI_ATMEL=y
+# CONFIG_HWMON is not set
+# CONFIG_USB_HID is not set
+CONFIG_USB=y
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_MON=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_RV3029C2=y
+CONFIG_EXT2_FS=y
+CONFIG_FUSE_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_XATTR=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_LL=y

board/cubietech/cubieboard/boot.cmd

@@ -0,0 +1,4 @@
+setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait panic=10 ${extra}
+fatload mmc 0 0x43000000 script.bin
+fatload mmc 0 0x48000000 uImage
+bootm 0x48000000

board/cubietech/cubieboard/mkcubiecard.sh

@@ -0,0 +1,119 @@
+#! /bin/sh
+# mkCubieCard.sh v0.1:
+# 2013, Carlo Caione <carlo.caione@gmail.com>
+# heavely based on :
+# mkA10card.sh v0.1
+# 2012, Jason Plum <jplum@archlinuxarm.org>
+# loosely based on :
+# mkcard.sh v0.5
+# (c) Copyright 2009 Graeme Gregory <dp@xora.org.uk>
+# Licensed under terms of GPLv2
+#
+# Parts of the procudure base on the work of Denys Dmytriyenko
+# http://wiki.omap.com/index.php/MMC_Boot_Format
+
+IMAGES_DIR=$1
+SPL_IMG=$IMAGES_DIR/sunxi-spl.bin
+UBOOT_IMG=$IMAGES_DIR/u-boot.bin
+UIMAGE=$IMAGES_DIR/uImage
+BIN_BOARD_FILE=$IMAGES_DIR/script.bin
+ROOTFS=$IMAGES_DIR/rootfs.tar
+BOOT_CMD_H=$IMAGES_DIR/boot.scr
+
+export LC_ALL=C
+
+if [ $# -ne 2 ]; then
+	echo "Usage: $0 <images_dir> <drive>"
+	exit 1;
+fi
+
+if [ $EUID -ne 0 ]; then
+	echo "This script must be run as root" 1>&2
+	exit 1
+fi
+
+if [ ! -f $SPL_IMG ] ||
+   [ ! -f $UBOOT_IMG ] ||
+   [ ! -f $UIMAGE ] ||
+   [ ! -f $BIN_BOARD_FILE ] ||
+   [ ! -f $ROOTFS ] ||
+   [ ! -f $BOOT_CMD_H ]; then
+	echo "File(s) missing."
+	exit 1
+fi
+
+DRIVE=$2
+P1=`mktemp -d`
+P2=`mktemp -d`
+
+dd if=/dev/zero of=$DRIVE bs=1M count=3
+
+SIZE=`fdisk -l $DRIVE | grep Disk | grep bytes | awk '{print $5}'`
+
+echo DISK SIZE - $SIZE bytes
+
+
+# ~2048, 16MB, FAT, bootable
+# ~rest of drive, Ext4
+{
+echo 32,512,0x0C,*
+echo 544,,,-
+} | sfdisk -D $DRIVE
+
+sleep 1
+
+if [ -b ${DRIVE}1 ]; then
+	D1=${DRIVE}1
+	umount ${DRIVE}1
+	mkfs.vfat -n "boot" ${DRIVE}1
+else
+	if [ -b ${DRIVE}p1 ]; then
+		D1=${DRIVE}p1
+		umount ${DRIVE}p1
+		mkfs.vfat -n "boot" ${DRIVE}p1
+	else
+		echo "Cant find boot partition in /dev"
+		exit 1
+	fi
+fi
+
+
+if [ -b ${DRIVE}2 ]; then
+	D2=${DRIVE}2
+	umount ${DRIVE}2
+	mkfs.ext4 -L "Cubie" ${DRIVE}2
+else
+	if [ -b ${DRIVE}p2 ]; then
+		D2=${DRIVE}p2
+		umount ${DRIVE}p2
+		mkfs.ext4 -L "Cubie" ${DRIVE}p2
+	else
+		echo "Cant find rootfs partition in /dev"
+		exit 1
+	fi
+fi
+
+mount $D1 $P1
+mount $D2 $P2
+
+# write uImage
+cp $UIMAGE $P1
+# write board file
+cp $BIN_BOARD_FILE $P1
+# write u-boot script
+cp $BOOT_CMD_H $P1
+# write rootfs
+tar -C $P2 -xvf $ROOTFS
+
+sync
+
+umount $D1
+umount $D2
+
+rm -fr $P1
+rm -fr $P2
+
+# write SPL
+dd if=$SPL_IMG of=$DRIVE bs=1024 seek=8
+# write mele u-boot
+dd if=$UBOOT_IMG of=$DRIVE bs=1024 seek=32

board/cubietech/cubieboard/post-build.sh

@@ -0,0 +1,14 @@
+#!/bin/sh
+# post-build.sh for CubieBoard
+# 2013, Carlo Caione <carlo.caione@gmail.com>
+
+BOARD_DIR="$(dirname $0)"
+MKIMAGE=$HOST_DIR/usr/bin/mkimage
+BOOT_CMD=$BOARD_DIR/boot.cmd
+BOOT_CMD_H=$BINARIES_DIR/boot.scr
+
+# U-Boot script
+if [ -e $MKIMAGE -a -e $BOOT_CMD ];
+then
+	$MKIMAGE -C none -A arm -T script -d $BOOT_CMD $BOOT_CMD_H
+fi

board/cubietech/cubieboard/readme.txt

@@ -0,0 +1,59 @@
+cubieboard
+
+-----
+Intro
+-----
+
+To be able to use your cubieboard board with the images generated by
+Buildroot you have to correctly setup the SD card.
+
+For more information, please see http://linux-sunxi.org/FirstSteps
+
+---------------
+How to build it
+---------------
+
+You need to use the cubieboard_defconfig, to do so:
+ * make cubieboard_defconfig
+
+And to compile:
+ * make
+
+-----------------
+What is generated
+-----------------
+
+After building, you should obtain this tree:
+
+    output/images/
+    +-- rootfs.tar
+    +-- boot.scr
+    +-- script.bin
+    +-- sunxi-spl.bin
+    +-- u-boot.bin
+    `-- uImage
+
+--------------------------
+How setting up the SD card
+--------------------------
+
+Depending on the rootfs size, you might want to use a 2GB or larger SD-card.
+The script mkcubiecard.sh will take care of partitioning and formatting
+the SD-card.
+
+BEWARE! This process will erase your SD card.
+
+Use dmesg to find out where the SD card is attached in the /dev tree
+(<device>) and then:
+
+# sudo ./mkcubiecard.sh <images_dir> <device>
+
+where:
+ - <images_dir> is the directory containing the generated files (usually
+   output/images)
+ - <device> is the device file of the SD card (usually /dev/sdX)
+
+
+
+--
+Carlo Caione <carlo.caione@gmail.com>

board/freescale/mpc8315erdb/linux-3.10.config

@@ -0,0 +1,107 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EXPERT=y
+# CONFIG_KALLSYMS is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_PMAC is not set
+CONFIG_PPC_83xx=y
+CONFIG_MPC831x_RDB=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_PCI=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_FSL_ELBC=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_CHR_DEV_SG=y
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_ATA=y
+CONFIG_SATA_FSL=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_LINEAR=y
+CONFIG_MD_RAID0=y
+CONFIG_MD_RAID1=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_NET_PCI=y
+CONFIG_E100=y
+CONFIG_GIANFAR=y
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MPC=y
+CONFIG_SPI=y
+CONFIG_SPI_BITBANG=y
+CONFIG_WATCHDOG=y
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_USB_HID is not set
+CONFIG_USB=y
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_MON=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+CONFIG_USB_UHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_NET2280=y
+CONFIG_USB_ETH=m
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_DS1307=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_INOTIFY=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_ANSI_CPRNG is not set

board/freescale/mpc8315erdb/readme.txt

@@ -0,0 +1,62 @@
+
+******************** WARNING ********************
+The compiled U-Boot binary is intended for NAND flash only!
+It won't work for NOR and will brick that bootloader!
+
+Also don't go playing around with different U-boot versions or flash targets
+unless you've got the necessary hardware and/or know-how to unbrick your kit.
+
+2013.04 is known good for NAND.
+******************** WARNING ********************
+
+You'll need to program the files created by buildroot into the flash.
+The fast way is to tftp transfer the files via one of the network interfaces.
+
+Alternatively you can transfer the files via serial console with an Ymodem
+file transfer from your terminal program by using a "loady" command
+from the u-boot prompt instead of the "tftp ..." commands stated below.
+Beware that serial console file transfers are quite slow!
+
+Remember to set the MPC8315ERDB switches to NAND boot if you want to use
+your newly built U-Boot.
+
+1. Program the new U-Boot binary to NAND flash (optional)
+    If you don't feel confident upgrading your bootloader then don't do it,
+    it's unnecessary most of the time.
+
+    => tftp $loadaddr u-boot-nand.bin
+    => nand erase 0 0x80000
+    => nand write $loadaddr 0 0x80000 $filesize
+
+2. Program the kernel to NAND flash
+
+    => tftp $loadaddr uImage
+    => nand erase 0x100000 0x1e0000
+    => nand write $loadaddr 0x100000 0x1e0000
+
+3. Program the DTB to NAND flash
+
+    => tftp $loadaddr mpc8315erdb.dtb
+    => nand erase 0x2e0000 0x20000
+    => nand write $loadaddr 0x2e0000 0x20000
+
+4. Program the root filesystem to NAND flash
+
+    => tftp $loadaddr rootfs.jffs2
+    => nand erase 0x400000 0x1c00000
+    => nand write $loadaddr 0x400000 $filesize
+
+5. Booting your new system
+
+    => setenv nandboot 'setenv bootargs root=/dev/mtdblock3 rootfstype=jffs2 console=$consoledev,$baudrate;nand read $fdtaddr 0x2e0000 0x20000;nand read $loadaddr 0x100000 0x1e0000;bootm $loadaddr - $fdtaddr'
+
+    If you want to set this boot option as default:
+
+    => setenv bootcmd 'run nandboot'
+    => saveenv
+
+    ...or for a single boot:
+
+    => run nandboot
+
+    You can login with user "root".

board/freescale/p1010rdb/linux-3.10.config

@@ -0,0 +1,143 @@
+CONFIG_PPC_85xx=y
+CONFIG_PHYS_64BIT=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_AUDIT=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EXPERT=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_P1010_RDB=y
+CONFIG_HIGHMEM=y
+CONFIG_SWIOTLB=y
+CONFIG_FORCE_MAX_ZONEORDER=12
+CONFIG_PCI=y
+CONFIG_PCI_MSI=y
+CONFIG_RAPIDIO=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_ARPD=y
+CONFIG_INET_ESP=y
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+CONFIG_IPV6=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_FTL=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_FSL_ELBC=y
+CONFIG_MTD_NAND_FSL_IFC=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_NBD=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_EEPROM_LEGACY=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_ATA=y
+CONFIG_SATA_FSL=y
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=y
+CONFIG_GIANFAR=y
+CONFIG_VITESSE_PHY=y
+CONFIG_FIXED_PHY=y
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+CONFIG_SERIAL_QE=m
+CONFIG_NVRAM=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_CPM=m
+CONFIG_I2C_MPC=y
+CONFIG_SPI=y
+CONFIG_SPI_FSL_SPI=y
+CONFIG_SPI_FSL_ESPI=y
+CONFIG_GPIO_MPC8XXX=y
+# CONFIG_HWMON is not set
+CONFIG_USB=y
+CONFIG_USB_MON=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_STORAGE=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_OF_ESDHC=y
+CONFIG_EDAC=y
+CONFIG_EDAC_MM_EDAC=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_CMOS=y
+CONFIG_DMADEVICES=y
+CONFIG_FSL_DMA=y
+# CONFIG_NET_DMA is not set
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_USE_FOR_EXT23=y
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_SQUASHFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=y
+CONFIG_CRC_T10DIF=y
+CONFIG_DEBUG_FS=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEBUG_INFO=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_DEV_FSL_CAAM=y

board/freescale/p1010rdb/readme.txt

@@ -0,0 +1,63 @@
+
+******************** WARNING ********************
+The compiled U-Boot binary is intended for NOR flash only!
+It won't work for NAND or SPI and will brick those bootloaders!
+
+Also don't go playing around with different U-boot versions or flash targets
+unless you've got the necessary hardware and/or know-how to unbrick your kit.
+
+2013.04 is known good for NOR.
+******************** WARNING ********************
+
+You'll need to program the files created by buildroot into the flash.
+The fast way is to tftp transfer the files via one of the network interfaces.
+
+Alternatively you can transfer the files via serial console with an Ymodem
+file transfer from your terminal program by using a "loady" command
+from the u-boot prompt instead of the "tftp ..." commands stated below.
+Beware that serial console file transfers are quite slow!
+
+Remember to set the P1010RDB switches to NOR boot if you want to use
+your newly built U-Boot.
+
+1. Program the new U-Boot binary to NOR flash (optional)
+    If you don't feel confident upgrading your bootloader then don't do it,
+    it's unnecessary most of the time.
+
+    => tftp $loadaddr u-boot.bin
+    => protect off 0xeff80000 +$filesize
+    => erase 0xeff80000 +$filesize
+    => cp.b $loadaddr 0xeff80000 $filesize
+
+2. Program the DTB to NOR flash
+
+    => tftp $loadaddr p1010rdb.dtb
+    => erase 0xee000000 +$filesize
+    => cp.b $loadaddr 0xee000000 $filesize
+
+3. Program the kernel to NOR flash
+
+    => tftp $loadaddr uImage
+    => erase 0xee080000 +$filesize
+    => cp.b $loadaddr 0xee080000 $filesize
+
+4. Program the root filesystem to NOR flash
+
+    => tftp $loadaddr rootfs.jffs2
+    => erase 0xee800000 0xeff5ffff
+    => cp.b $loadaddr 0xee800000 $filesize
+
+5. Booting your new system
+
+    => setenv norboot 'setenv bootargs root=/dev/mtdblock2 rootfstype=jffs2 console=$consoledev,$baudrate;bootm 0xee080000 - 0xee000000'
+
+    If you want to set this boot option as default:
+
+    => setenv bootcmd 'run norboot'
+    => saveenv
+
+    ...or for a single boot:
+
+    => run norboot
+
+    You can login with user "root".

board/gnublin/README

@@ -0,0 +1,48 @@
+This the Buildroot support for the LPC3131 based Gnublin board (see here:
+http://en.gnublin.org/) and to the Elektor Linux board
+(http://www.elektor.com/news/elektor-presents-embedded-linux-made-easy.2147294.
+lynkx)
+
+Unfortunately currently the AD and the pwm modules are not supported, i'm about
+to add also those drivers as well to the current kernel later.
+
+Base kernel version: 3.7 (available here:
+https://gitorious.org/linux-3-7-gnublin/linux-3-7-gnublin/commits/gnublin-
+support)
+
+U-boot version: 2009.11 (available here:
+https://gitorious.org/u-boot-gnublin-support/u-boot-gnublin-support)
+
+
+Steps to create a bootable SD card (with the given config you need an at least
+500 MB SD card):
+
+1.Config buildroot with the gnublin_defconfig:
+
+$ make gnublin_defconfig
+
+2.Tweak the config for your needs:
+
+$ make menuconfig
+
+3.Build:
+
+$ make
+
+4.Create two partitions on your SD card, one with type of BootIt (fdisk ID: df),
+the size should be around 1M, and another partition with all of the left space
+on the card, and with the type of normal DOS partition.
+
+5.From the output/images directory dump the u-boot image to the BootIt partition
+(probably you have to modify the output /dev files according to your system):
+
+$ dd if=output/images/u-boot.bin of=/dev/sdc1
+
+6.Dump the root fs image as well:
+
+$ dd if=output/images/rootfs.ext2 of=/dev/sdc2
+
+7.Insert the SD card into the board's slot, and your board should boot up with
+your newly created system.
+
+Any feedback/report is welcome on the mr.zoltan.gyarmati[at]gmail.com

board/olimex/imx233_olinuxino/linux-01-mmc-mxs-mmc-add-cd-inverted-property.patch

@@ -0,0 +1,47 @@
+From 4c0c9be05004d1eb674b7586216b3d93cc04531c Mon Sep 17 00:00:00 2001
+From: Marc Kleine-Budde <mkl@pengutronix.de>
+Date: Wed, 10 Apr 2013 11:13:43 +0200
+Subject: [PATCH 1/3] mmc: mxs-mmc: add cd-inverted property
+
+The card-detect GPIO is inverted on some boards. Handle such case.
+
+Acked-by: Shawn Guo <shawn.guo@linaro.org>
+Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
+Signed-off-by: Chris Ball <cjb@laptop.org>
+---
+ drivers/mmc/host/mxs-mmc.c | 5 ++++-
+ 1 file changed, 4 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
+index 4efe302..0cdf1f6 100644
+--- a/drivers/mmc/host/mxs-mmc.c
++++ b/drivers/mmc/host/mxs-mmc.c
+@@ -72,6 +72,7 @@ struct mxs_mmc_host {
+ 	int				sdio_irq_en;
+ 	int				wp_gpio;
+ 	bool				wp_inverted;
++	bool				cd_inverted;
+ };
+
+ static int mxs_mmc_get_ro(struct mmc_host *mmc)
+@@ -96,7 +97,7 @@ static int mxs_mmc_get_cd(struct mmc_host *mmc)
+ 	struct mxs_ssp *ssp = &host->ssp;
+
+ 	return !(readl(ssp->base + HW_SSP_STATUS(ssp)) &
+-		 BM_SSP_STATUS_CARD_DETECT);
++		 BM_SSP_STATUS_CARD_DETECT)) ^ host->cd_inverted;
+ }
+
+ static void mxs_mmc_reset(struct mxs_mmc_host *host)
+@@ -691,6 +692,8 @@ static int mxs_mmc_probe(struct platform_device *pdev)
+ 	if (flags & OF_GPIO_ACTIVE_LOW)
+ 		host->wp_inverted = 1;
+
++	host->cd_inverted = of_property_read_bool(np, "cd-inverted");
++
+ 	mmc->f_min = 400000;
+ 	mmc->f_max = 288000000;
+ 	mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+--
+1.8.1.5
+

board/olimex/imx233_olinuxino/linux-02-mmc-mxs-mmc-add-non-removable-property.patch

@@ -0,0 +1,53 @@
+From 5086e5f41fd107539911edf62f2d202753ed1980 Mon Sep 17 00:00:00 2001
+From: Marc Kleine-Budde <mkl@pengutronix.de>
+Date: Wed, 10 Apr 2013 11:13:44 +0200
+Subject: [PATCH 2/3] mmc: mxs-mmc: add non-removable property
+
+Some boards have non removable cards like eMMC. Handle such case.
+
+Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
+Acked-by: Shawn Guo <shawn.guo@linaro.org>
+Signed-off-by: Chris Ball <cjb@laptop.org>
+---
+ drivers/mmc/host/mxs-mmc.c | 10 +++++++---
+ 1 file changed, 7 insertions(+), 3 deletions(-)
+
+diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
+index 0cdf1f6..c231881 100644
+--- a/drivers/mmc/host/mxs-mmc.c
++++ b/drivers/mmc/host/mxs-mmc.c
+@@ -73,6 +73,7 @@ struct mxs_mmc_host {
+ 	int				wp_gpio;
+ 	bool				wp_inverted;
+ 	bool				cd_inverted;
++	bool				non_removable;
+ };
+
+ static int mxs_mmc_get_ro(struct mmc_host *mmc)
+@@ -96,8 +97,9 @@ static int mxs_mmc_get_cd(struct mmc_host *mmc)
+ 	struct mxs_mmc_host *host = mmc_priv(mmc);
+ 	struct mxs_ssp *ssp = &host->ssp;
+
+-	return !(readl(ssp->base + HW_SSP_STATUS(ssp)) &
+-		 BM_SSP_STATUS_CARD_DETECT)) ^ host->cd_inverted;
++	return host->non_removable ||
++		!(readl(ssp->base + HW_SSP_STATUS(ssp)) &
++		  BM_SSP_STATUS_CARD_DETECT) ^ host->cd_inverted;
+ }
+
+ static void mxs_mmc_reset(struct mxs_mmc_host *host)
+@@ -687,8 +689,10 @@ static int mxs_mmc_probe(struct platform_device *pdev)
+ 		mmc->caps |= MMC_CAP_4_BIT_DATA;
+ 	else if (bus_width == 8)
+ 		mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA;
++	host->non_removable = of_property_read_bool(np, "non-removable");
++	if (host->non_removable)
++		mmc->caps |= MMC_CAP_NONREMOVABLE;
+ 	host->wp_gpio = of_get_named_gpio_flags(np, "wp-gpios", 0, &flags);
+-
+ 	if (flags & OF_GPIO_ACTIVE_LOW)
+ 		host->wp_inverted = 1;
+
+--
+1.8.1.5
+

board/olimex/imx233_olinuxino/linux-03-mmc-mxs-mmc-add-broken-cd-property.patch

@@ -0,0 +1,50 @@
+From 1d53196a0d604fcf636203fac21e944b6a9cf275 Mon Sep 17 00:00:00 2001
+From: Hector Palacios <hector.palacios@digi.com>
+Date: Wed, 10 Apr 2013 11:13:45 +0200
+Subject: [PATCH 3/3] mmc: mxs-mmc: add broken-cd property
+
+According to bindings documentation for mmc, the property 'broken-cd'
+can be used to indicate card-detection is not available and polling
+must be used instead. This patch retrieves this property
+and sets a custom flag. On the get_cd() hook, it returns 1 if
+the flag is set, to always assume the card is present.
+
+Signed-off-by: Hector Palacios <hector.palacios@digi.com>
+Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
+Signed-off-by: Chris Ball <cjb@laptop.org>
+---
+ drivers/mmc/host/mxs-mmc.c | 4 +++-
+ 1 file changed, 3 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
+index c231881..146a53b 100644
+--- a/drivers/mmc/host/mxs-mmc.c
++++ b/drivers/mmc/host/mxs-mmc.c
+@@ -73,6 +73,7 @@ struct mxs_mmc_host {
+ 	int				wp_gpio;
+ 	bool				wp_inverted;
+ 	bool				cd_inverted;
++	bool				broken_cd;
+ 	bool				non_removable;
+ };
+
+@@ -97,7 +98,7 @@ static int mxs_mmc_get_cd(struct mmc_host *mmc)
+ 	struct mxs_mmc_host *host = mmc_priv(mmc);
+ 	struct mxs_ssp *ssp = &host->ssp;
+
+-	return host->non_removable ||
++	return host->non_removable || host->broken_cd ||
+ 		!(readl(ssp->base + HW_SSP_STATUS(ssp)) &
+ 		  BM_SSP_STATUS_CARD_DETECT) ^ host->cd_inverted;
+ }
+@@ -689,6 +690,7 @@ static int mxs_mmc_probe(struct platform_device *pdev)
+ 		mmc->caps |= MMC_CAP_4_BIT_DATA;
+ 	else if (bus_width == 8)
+ 		mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA;
++	host->broken_cd = of_property_read_bool(np, "broken-cd");
+ 	host->non_removable = of_property_read_bool(np, "non-removable");
+ 	if (host->non_removable)
+ 		mmc->caps |= MMC_CAP_NONREMOVABLE;
+--
+1.8.1.5
+

board/olimex/imx233_olinuxino/linux-04-ARM-dts-imx23-olinuxino-mark-sdcard-cd-as-broken.patch

@@ -0,0 +1,28 @@
+From 1897fda94190498573f9d1b72bc6b7b58c720957 Mon Sep 17 00:00:00 2001
+From: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
+Date: Sat, 6 Apr 2013 10:42:10 -0300
+Subject: [PATCH 1/1] ARM: dts: imx23-olinuxino: mark sdcard cd as broken
+
+The imx23-olinuxino sdcard doesn't have card detect.
+
+Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
+Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
+---
+ arch/arm/boot/dts/imx23-olinuxino.dts | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts
+index e7484e4..d107c4a 100644
+--- a/arch/arm/boot/dts/imx23-olinuxino.dts
++++ b/arch/arm/boot/dts/imx23-olinuxino.dts
+@@ -29,6 +29,7 @@
+ 				pinctrl-names = "default";
+ 				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
+ 				bus-width = <4>;
++				broken-cd;
+ 				status = "okay";
+ 			};
+
+--
+1.8.1.5
+

board/olimex/imx233_olinuxino/linux-3.9.config

@@ -0,0 +1,188 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_PERF_EVENTS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_BLK_DEV_INTEGRITY=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_MXS=y
+CONFIG_MACH_MXS_DT=y
+CONFIG_ARM_THUMB=y
+CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_AEABI=y
+CONFIG_ATAGS=y
+CONFIG_CMDLINE="console=ttyAMA0,115200 root=/dev/mmcblk0p2 rw rootwait"
+CONFIG_CMDLINE_FROM_BOOTLOADER=y
+CONFIG_AUTO_ZRELADDR=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+CONFIG_CAN_FLEXCAN=m
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_M25P80=y
+# CONFIG_M25PXX_USE_FAST_READ is not set
+CONFIG_MTD_SST25L=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_GPMI_NAND=y
+CONFIG_MTD_UBI=y
+# CONFIG_BLK_DEV is not set
+CONFIG_EEPROM_AT24=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_NETDEVICES=y
+CONFIG_ENC28J60=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_SMSC95XX=y
+CONFIG_SMSC_PHY=y
+CONFIG_ICPLUS_PHY=y
+CONFIG_REALTEK_PHY=y
+CONFIG_MICREL_PHY=y
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_TSC2007=m
+# CONFIG_SERIO is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_MXS_AUART=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MXS=y
+CONFIG_SPI=y
+CONFIG_SPI_GPIO=m
+CONFIG_SPI_MXS=y
+CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_FB=y
+CONFIG_FB_MXS=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_PWM=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_LOGO=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SOC=y
+CONFIG_SND_MXS_SOC=y
+CONFIG_SND_SOC_MXS_SGTL5000=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_MXS_PHY=y
+CONFIG_MMC=y
+CONFIG_MMC_MXS=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_DS1307=m
+CONFIG_RTC_DRV_STMP=y
+CONFIG_DMADEVICES=y
+CONFIG_MXS_DMA=y
+CONFIG_STAGING=y
+CONFIG_MXS_LRADC=y
+CONFIG_IIO_SYSFS_TRIGGER=y
+CONFIG_COMMON_CLK_DEBUG=y
+CONFIG_IIO=y
+CONFIG_PWM=y
+CONFIG_PWM_MXS=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_FSCACHE=m
+CONFIG_FSCACHE_STATS=y
+CONFIG_CACHEFILES=m
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RUBIN=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_15=y
+CONFIG_PRINTK_TIME=y
+CONFIG_FRAME_WARN=2048
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOCKUP_DETECTOR=y
+CONFIG_TIMER_STATS=y
+CONFIG_PROVE_LOCKING=y
+CONFIG_DEBUG_INFO=y
+CONFIG_BLK_DEV_IO_TRACE=y
+CONFIG_STRICT_DEVMEM=y
+CONFIG_DEBUG_USER=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC7=m

board/olimex/imx233_olinuxino/mxs-bootlets/mxs-bootlets-01-olinuxino.patch

@@ -0,0 +1,122 @@
+Forward-ported patch from https://github.com/koliqi/imx23-olinuxino
+for mxs-bootlets-10.12.01
+
+Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
+
+diff -Nura imx-bootlets-src-10.12.01/linux_prep/board/imx23_olinuxino_dev.c imx-bootlets-src-10.12.01-olinuxino/linux_prep/board/imx23_olinuxino_dev.c
+--- imx-bootlets-src-10.12.01/linux_prep/board/imx23_olinuxino_dev.c	1969-12-31 21:00:00.000000000 -0300
++++ imx-bootlets-src-10.12.01-olinuxino/linux_prep/board/imx23_olinuxino_dev.c	2013-05-17 15:07:33.282961551 -0300
+@@ -0,0 +1,54 @@
++/*
++ * Platform specific data for the IMX23_OLINUXINO development board
++ *
++ * Fadil Berisha <fadil.r.berisha@gmail.com>
++ *
++ * Copyright 2008 SigmaTel, Inc
++ * Copyright 2008 Embedded Alley Solutions, Inc
++ * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
++ *
++ * This file is licensed under the terms of the GNU General Public License
++ * version 2. This program is licensed "as is" without any warranty of any
++ * kind, whether express or implied.
++ *
++ * http://www.opensource.org/licenses/gpl-license.html
++ * http://www.gnu.org/copyleft/gpl.html
++ */
++#include <setup.h>
++#include <keys.h>
++#include <lradc_buttons.h>
++
++/************************************************
++ * LRADC keyboard data *
++ ************************************************/
++int lradc_keypad_ch = LRADC_CH0;
++int lradc_vddio_ch = LRADC_CH6;
++
++struct lradc_keycode lradc_keycodes[] = {
++ { 100, KEY4 },
++ { 306, KEY5 },
++ { 601, KEY6 },
++ { 932, KEY7 },
++ { 1260, KEY8 },
++ { 1424, KEY9 },
++ { 1707, KEY10 },
++ { 2207, KEY11 },
++ { 2525, KEY12 },
++ { 2831, KEY13 },
++ { 3134, KEY14 },
++ { -1, 0 },
++};
++
++/************************************************
++ * Magic key combinations for Armadillo *
++ ************************************************/
++u32 magic_keys[MAGIC_KEY_NR] = {
++ [MAGIC_KEY1] = KEY4,
++ [MAGIC_KEY2] = KEY6,
++ [MAGIC_KEY3] = KEY10,
++};
++
++/************************************************
++ * Default command line *
++ ************************************************/
++char cmdline_def[] = "console=ttyAMA0,115200";
+diff -Nura imx-bootlets-src-10.12.01/linux_prep/cmdlines/imx23_olinuxino_dev.txt imx-bootlets-src-10.12.01-olinuxino/linux_prep/cmdlines/imx23_olinuxino_dev.txt
+--- imx-bootlets-src-10.12.01/linux_prep/cmdlines/imx23_olinuxino_dev.txt	1969-12-31 21:00:00.000000000 -0300
++++ imx-bootlets-src-10.12.01-olinuxino/linux_prep/cmdlines/imx23_olinuxino_dev.txt	2013-05-17 15:07:49.663496106 -0300
+@@ -0,0 +1,3 @@
++noinitrd console=ttyAMA0,115200 root=/dev/mmcblk0p2 rw rootwait ssp1=mmc
++noinitrd console=ttyAMA0,115200 root=/dev/mmcblk0p2 rw rootwait ssp1=mmc
++noinitrd console=ttyAMA0,115200 root=/dev/mmcblk0p2 rw rootwait ssp1=mmc
+diff -Nura imx-bootlets-src-10.12.01/linux_prep/core/setup.c imx-bootlets-src-10.12.01-olinuxino/linux_prep/core/setup.c
+--- imx-bootlets-src-10.12.01/linux_prep/core/setup.c	2010-11-04 04:35:38.000000000 -0300
++++ imx-bootlets-src-10.12.01-olinuxino/linux_prep/core/setup.c	2013-05-17 15:08:39.246114205 -0300
+@@ -84,6 +84,8 @@
+ #include "../../mach-mx28/includes/registers/regsrtc.h"
+ #elif defined(STMP378X)
+ #include "../../mach-mx23/includes/registers/regsrtc.h"
++#elif defined(IMX23_OLINUXINO)
++#include "../../mach-mx23/includes/registers/regsrtc.h"
+ #endif
+
+ #define NAND_SECONDARY_BOOT          0x00000002
+diff -Nura imx-bootlets-src-10.12.01/linux_prep/include/mx23/platform.h imx-bootlets-src-10.12.01-olinuxino/linux_prep/include/mx23/platform.h
+--- imx-bootlets-src-10.12.01/linux_prep/include/mx23/platform.h	2010-11-04 04:35:38.000000000 -0300
++++ imx-bootlets-src-10.12.01-olinuxino/linux_prep/include/mx23/platform.h	2013-05-17 15:09:21.006476997 -0300
+@@ -19,6 +19,8 @@
+
+ #if defined (BOARD_STMP378X_DEV)
+ #define	MACHINE_ID	0xa45
++#elif defined (BOARD_IMX23_OLINUXINO_DEV)
++#define MACHINE_ID	0x1009
+ #else
+ #error "Allocate a machine ID for your board"
+ #endif
+diff -Nura imx-bootlets-src-10.12.01/linux_prep/Makefile imx-bootlets-src-10.12.01-olinuxino/linux_prep/Makefile
+--- imx-bootlets-src-10.12.01/linux_prep/Makefile	2010-11-04 04:35:38.000000000 -0300
++++ imx-bootlets-src-10.12.01-olinuxino/linux_prep/Makefile	2013-05-17 15:09:53.554539143 -0300
+@@ -69,6 +69,11 @@
+ HW_OBJS = $(LRADC_OBJS)
+ CFLAGS += -DMX28 -DBOARD_MX28_EVK
+ endif
++ifeq ($(BOARD), imx23_olinuxino_dev)
++ARCH = mx23
++HW_OBJS = $(LRADC_OBJS)
++CFLAGS += -DIMX23_OLINUXINO -DBOARD_IMX23_OLINUXINO_DEV
++endif
+
+ # Generic code
+ CORE_OBJS = entry.o resume.o cmdlines.o setup.o keys.o
+diff -Nura imx-bootlets-src-10.12.01/Makefile imx-bootlets-src-10.12.01-olinuxino/Makefile
+--- imx-bootlets-src-10.12.01/Makefile	2010-11-04 04:35:38.000000000 -0300
++++ imx-bootlets-src-10.12.01-olinuxino/Makefile	2013-05-17 15:23:53.709956619 -0300
+@@ -16,6 +16,9 @@
+ ifeq ($(BOARD), iMX28_EVK)
+ ARCH = mx28
+ endif
++ifeq ($(BOARD), imx23_olinuxino_dev)
++ARCH = mx23
++endif
+
+ all: build_prep gen_bootstream
+

board/olimex/imx233_olinuxino/readme.txt

@@ -0,0 +1,55 @@
+This configuration is intended as a base image, it doesn't have support
+for things like WiFi, either in the kernel or packages.
+
+It also pulls up the console on the serial port, not on TV output.
+
+You'll need a spare MicroSD card with Freescale's special partition layout.
+This is basically two partitions:
+
+1) Type 53, the bootstrap + bootloader/kernel partition, should be 16MB.
+2) Anything you like, for this example an ext2 partition, type 83 (linux).
+
+Assuming you see your MicroSD card as /dev/sdc you'd need to do, as root
+and from the buildroot project top level directory:
+(remember to replace /dev/sdc* with the appropiate device name!)
+
+***** WARNING: Double check that /dev/sdc is your MicroSD card *****
+*****      It might be /dev/sdb or some other device name      *****
+***** Failure to do so may result in you wiping your hard disk *****
+
+1. Unmount the filesystem(s) if they're already mounted, usually...
+
+   # for fs in `grep /dev/sdc /proc/mounts|cut -d ' ' -f 1`;do umount $fs;done
+
+   ...should work
+
+2. Blank the partition table out
+
+   # dd if=/dev/zero of=/dev/sdc bs=1024 count=1024
+
+3. Set up the partitions
+
+   # fdisk /dev/sdc
+   n
+   p
+   1
+   <ENTER>
+   +16MB
+   t
+   53
+   n
+   p
+   2
+   <ENTER>
+   <ENTER>
+   w
+
+4. Fill up the first (bootstrap + kernel) partition
+   # dd if=output/images/imx23_olinuxino_dev_linux.sb bs=512 of=/dev/sdc1 seek=4
+
+5. Fill up the second (filesystem) partition
+   # dd if=output/images/rootfs.ext2 of=/dev/sdc2 bs=512
+
+6. Remove the MicroSD card from your linux PC and put it into your olinuxino.
+
+7. Boot! You're done!

board/qemu/arm-nuri/readme.txt

@@ -0,0 +1,10 @@
+Run the emulation with:
+
+  qemu-system-arm -M nuri -kernel output/images/zImage -append "console=ttySAC1,115200" -smp 2 -serial null -serial stdio
+
+The login prompt will appear in the terminal that started Qemu. The
+graphical window is the framebuffer.
+
+Startup time is slow because of the SMP CPU emulation so be patient.
+
+Tested with QEMU 1.5.2

board/qemu/arm-versatile/linux-3.10.config

@@ -1,3 +1,4 @@
+CONFIG_ARCH_VERSATILE=y
 CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
@@ -15,7 +16,6 @@ CONFIG_LEDS_CPU=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=1f03 mem=32M"
-CONFIG_VFP=y
 CONFIG_PM=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -34,11 +34,12 @@ CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
 CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_ARM_INTEGRATOR=y
+CONFIG_MTD_PHYSMAP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_EEPROM_LEGACY=m
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_SMC91X=y
@@ -69,7 +70,6 @@ CONFIG_MMC=y
 CONFIG_MMC_ARMMMCI=m
 CONFIG_EXT2_FS=y
 CONFIG_VFAT_FS=m
-CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_CRAMFS=y
 CONFIG_MINIX_FS=y

board/qemu/arm-versatile/readme.txt

@@ -4,3 +4,5 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.
+
+Tested with QEMU 1.5.2

board/qemu/arm-vexpress/readme.txt

@@ -4,3 +4,5 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.
+
+Tested with QEMU 1.5.2

board/qemu/microblazebe-mmu/readme.txt

@@ -4,3 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
+Tested with QEMU 1.5.2

board/qemu/microblazeel-mmu/readme.txt

@@ -4,3 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
+Tested with QEMU 1.5.2

board/qemu/mips-malta/readme.txt

@@ -1,7 +1,9 @@
 Run the emulation with:
 
- qemu-system-mips -M malta -kernel output/images/vmlinux -serial stdio -hda output/images/rootfs.ext2 -append "root=/dev/hda"
+ qemu-system-mips -M malta -kernel output/images/vmlinux -serial stdio -hda output/images/rootfs.ext2 -append "root=/dev/hda" -net nic,model=pcnet -net user
 
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer. No keyboard support has been
 enabled.
+
+Tested with QEMU 1.5.2

board/qemu/mips64-malta/linux-3.10.config

@@ -0,0 +1,78 @@
+CONFIG_MIPS_MALTA=y
+CONFIG_CPU_MIPS64_R1=y
+CONFIG_64BIT=y
+CONFIG_64BIT_PHYS_ADDR=y
+CONFIG_MIPS_MT_SMP=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_HZ_100=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=15
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_PID_NS=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PCI=y
+CONFIG_PM=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_MISC_DEVICES is not set
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_PIIX=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_NET_PCI=y
+CONFIG_PCNET32=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO_I8042 is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_MFD_SUPPORT is not set
+CONFIG_FB=y
+CONFIG_FB_CIRRUS=y
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_QUOTA=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set

board/qemu/mips64-malta/readme.txt

@@ -0,0 +1,11 @@
+Run the emulation with:
+
+ qemu-system-mips64 -M malta -kernel output/images/vmlinux -serial stdio -hda output/images/rootfs.ext2 -append "root=/dev/hda"
+
+The login prompt will appear in the terminal that started Qemu. The
+graphical window is the framebuffer. No keyboard support has been
+enabled.
+
+This configuration is known to be flaky.
+
+Tested with QEMU 1.5.2

board/qemu/mipsel-malta/readme.txt

@@ -1,7 +1,9 @@
 Run the emulation with:
 
- qemu-system-mipsel -M malta -kernel output/images/vmlinux -serial stdio -hda output/images/rootfs.ext2 -append "root=/dev/hda"
+ qemu-system-mipsel -M malta -kernel output/images/vmlinux -serial stdio -hda output/images/rootfs.ext2 -append "root=/dev/hda" -net nic,model=pcnet -net user
 
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer. No keyboard support has been
 enabled.
+
+Tested with QEMU 1.5.2

board/qemu/powerpc-g3beige/readme.txt

@@ -1,6 +1,8 @@
 Run the emulation with:
 
-  qemu-system-ppc -M g3beige -kernel output/images/vmlinux -hda output/images/rootfs.ext2 -append "console=ttyS0 root=/dev/hdc" -serial stdio
+  qemu-system-ppc -M g3beige -kernel output/images/vmlinux -hda output/images/rootfs.ext2 -append "console=ttyS0 root=/dev/hdc" -serial stdio -net nic,model=rtl8139 -net user
 
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.
+
+Tested with QEMU 1.5.2

board/qemu/powerpc-mpc8544ds/readme.txt

@@ -1,6 +1,7 @@
 Run the emulation with:
 
- qemu-system-ppc -M mpc8544ds -kernel output/images/vmlinux -serial stdio
+ qemu-system-ppc -M mpc8544ds -kernel output/images/vmlinux -serial stdio -net nic,model=e1000 -net user
 
 The login prompt will appear in the terminal that started Qemu.
 
+Tested with QEMU 1.5.2

board/qemu/powerpc-virtex-ml507/readme.txt

@@ -0,0 +1,8 @@
+Run the emulation with:
+
+ cp output/images/virtex440-ml507.dtb ppc.dtb
+ qemu-system-ppc -M virtex-ml507 -kernel output/images/vmlinux -m 256 -nographic -append "console=ttyS0"
+
+The login prompt will appear in the terminal that started Qemu.
+
+Tested with QEMU 1.5.2

board/qemu/sh4-r2d/readme.txt

@@ -1,7 +1,8 @@
 Run the emulation with:
 
-  qemu-system-sh4 -M r2d -kernel output/images/zImage -drive file=output/images/rootfs.ext2,if=ide -append "root=/dev/sda console=ttySC1,115200 noiotrap" -serial null -serial stdio
+  qemu-system-sh4 -M r2d -kernel output/images/zImage -drive file=output/images/rootfs.ext2,if=ide -append "root=/dev/sda console=ttySC1,115200 noiotrap" -serial null -serial stdio -net nic,model=rtl8139 -net user
 
 The login prompt will appear in the terminal that started Qemu.
 The graphical window is the framebuffer.
 
+Tested with QEMU 1.5.2

board/qemu/sparc-ss10/readme.txt

@@ -1,7 +1,8 @@
 Run the emulation with:
 
-  qemu-system-sparc -M SS-10 -kernel output/images/zImage -drive file=output/images/rootfs.ext2 -append "root=/dev/sda console=ttyS0,115200" -serial stdio
+  qemu-system-sparc -M SS-10 -kernel output/images/zImage -drive file=output/images/rootfs.ext2 -append "root=/dev/sda console=ttyS0,115200" -serial stdio -net nic,model=lance -net user
 
 The login prompt will appear in the terminal that started Qemu.
 The graphical window is the framebuffer.
 
+Tested with QEMU 1.5.2

board/qemu/x86/readme.txt

@@ -1,5 +1,7 @@
 Run the emulation with:
 
-  qemu-system-i386 -M pc -kernel output/images/bzImage -drive file=output/images/rootfs.ext2,if=ide -append root=/dev/sda
+  qemu-system-i386 -M pc -kernel output/images/bzImage -drive file=output/images/rootfs.ext2,if=ide -append root=/dev/sda -net nic,model=rtl8139 -net user
 
 The login prompt will appear in the graphical window.
+
+Tested with QEMU 1.5.2

board/qemu/x86_64/readme.txt

@@ -1,5 +1,7 @@
 Run the emulation with:
 
-  qemu-system-x86_64 -M pc -kernel output/images/bzImage -drive file=output/images/rootfs.ext2,if=ide -append root=/dev/sda
+  qemu-system-x86_64 -M pc -kernel output/images/bzImage -drive file=output/images/rootfs.ext2,if=ide -append root=/dev/sda -net nic,model=rtl8139 -net user
 
 The login prompt will appear in the graphical window.
+
+Tested with QEMU 1.5.2

board/raspberrypi/readme.txt

@@ -0,0 +1,127 @@
+RaspberryPi
+
+Intro
+=====
+
+To be able to use your RaspberryPi board with the images generated by
+Buildroot, you have a prior choice to make, will you use:
+    - Volatile rootfs in RAM (The rootfs is an initramfs) or
+    - Persistent rootfs on the SDCard
+
+Also, a good source of information is http://elinux.org/R-Pi_Hub
+
+Volatile rootfs
+===============
+
+How to build it
+---------------
+
+You need to use the rpi_defconfig, to do so:
+ * make rpi_defconfig
+
+Then, you need to select the kind of images you want:
+ * make menuconfig
+ * Select "Filesystem images"
+ * Select "initial RAM filesystem linked into linux kernel"
+
+What is generated
+-----------------
+
+After building, you should obtain this tree:
+
+    output/images/
+    +-- rootfs.tar
+    +-- rpi-firmware
+    |   +-- bootcode.bin
+    |   +-- config.txt
+    |   +-- fixup_cd.dat
+    |   +-- fixup.dat
+    |   +-- start_cd.elf
+    |   `-- start.elf
+    `-- zImage
+
+Note : rootfs.tar will only be there if you kept "tar the root filesystem"
+option selected in "Filesystem images".
+
+Where should the binaries be copied on the SDCard
+-------------------------------------------------
+
+Your SDCard must have its first partition using fat32 and marked bootable.
+
+At the root of the partition, the RaspberryPi must find the following files:
+
+ * bootcode.bin
+ * config.txt
+ * fixup_cd.dat
+ * fixup.dat
+ * start_cd.elf
+ * start.elf
+ * zImage
+
+So you should copy the entire content of output/images/rpi-firmware along with
+zImage.
+
+Note: You can create any number of partitions you desire, the only requirement
+is that the first partition must be using fat32 and bootable.
+
+Persistent rootfs
+=================
+
+How to build it
+---------------
+
+You only need to use the rpi_defconfig, to do so:
+ * make rpi_defconfig
+
+What is generated
+-----------------
+
+After building, you should obtain this tree:
+
+    output/images/
+    +-- rootfs.tar
+    +-- rpi-firmware
+    |   +-- bootcode.bin
+    |   +-- config.txt
+    |   +-- fixup_cd.dat
+    |   +-- fixup.dat
+    |   +-- start_cd.elf
+    |   `-- start.elf
+    `-- zImage
+
+Where should the binaries be copied on the SDCard
+-------------------------------------------------
+
+Your SDCard must have its first partition using fat32 and marked bootable.
+It should also have another partition which will contain your rootfs, it should
+be partitioned as ext4.
+
+Boot partition
+~~~~~~~~~~~~~~
+
+The first partition will contain everything used to boot the RaspberryPi.
+You must copy theses files at the root of partition:
+
+ * bootcode.bin
+ * config.txt
+ * fixup_cd.dat
+ * fixup.dat
+ * start_cd.elf
+ * start.elf
+ * zImage
+
+So you should copy the entire content of output/images/rpi-firmware along with
+zImage.
+
+Rootfs partition
+~~~~~~~~~~~~~~~~
+
+The second partition will contain your rootfs.
+Simply extract (as root!) the contents of the rootfs.tar archive
+into this partition.
+
+For example: (Assuming mountpoint is a directory and exist)
+
+ $ sudo mount /dev/sdXY /mnt/mountpoint
+ $ sudo tar xf rootfs.tar -C /mnt/mountpoint
+

board/telit/evk-pro3/barebox-2013.04.0-0001-watchdog-add-keep-alive-support.patch

@@ -0,0 +1,88 @@
+From b5e57a9f158a293b1151638336478af8a5aad0f0 Mon Sep 17 00:00:00 2001
+From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed, 14 Nov 2012 19:16:35 +0800
+Subject: [PATCH 1/5] watchdog: add keep alive support
+
+this will allow to ping the watchdog via poller
+
+Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+---
+ drivers/watchdog/Kconfig   |  1 +
+ drivers/watchdog/wd_core.c | 21 +++++++++++++++++++++
+ include/watchdog.h         |  2 ++
+ 3 files changed, 24 insertions(+)
+
+diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
+index 2e2900c..0b4dc84 100644
+--- a/drivers/watchdog/Kconfig
++++ b/drivers/watchdog/Kconfig
+@@ -4,6 +4,7 @@ config WATCHDOG_IMX_RESET_SOURCE
+ 
+ menuconfig WATCHDOG
+ 	bool "Watchdog support"
++	select GENERIC_POLLER
+ 	help
+ 	  Many platforms support a watchdog to keep track of a working machine.
+ 	  This framework provides routines to handle these watchdogs.
+diff --git a/drivers/watchdog/wd_core.c b/drivers/watchdog/wd_core.c
+index 3d0cfc6..a1b9e28 100644
+--- a/drivers/watchdog/wd_core.c
++++ b/drivers/watchdog/wd_core.c
+@@ -17,18 +17,39 @@
+ #include <errno.h>
+ #include <linux/ctype.h>
+ #include <watchdog.h>
++#include <poller.h>
+ 
+ /*
+  * Note: this simple framework supports one watchdog only.
+  */
+ static struct watchdog *watchdog;
+ 
++static void watchdog_poller_func(struct poller_struct *poller)
++{
++	watchdog->keep_alive(watchdog);
++}
++
++static struct poller_struct watchdog_poller = {
++	.func = watchdog_poller_func,
++};
++
+ int watchdog_register(struct watchdog *wd)
+ {
+ 	if (watchdog != NULL)
+ 		return -EBUSY;
+ 
+ 	watchdog = wd;
++
++	if (watchdog->keep_alive) {
++		int ret;
++
++		ret = poller_register(&watchdog_poller);
++		if (ret) {
++			watchdog = NULL;
++			return ret;
++		}
++	}
++
+ 	return 0;
+ }
+ EXPORT_SYMBOL(watchdog_register);
+diff --git a/include/watchdog.h b/include/watchdog.h
+index 3e2d08e..d5ecf2f 100644
+--- a/include/watchdog.h
++++ b/include/watchdog.h
+@@ -13,8 +13,10 @@
+ #ifndef INCLUDE_WATCHDOG_H
+ # define INCLUDE_WATCHDOG_H
+ 
++
+ struct watchdog {
+ 	int (*set_timeout)(struct watchdog *, unsigned);
++	void (*keep_alive)(struct watchdog *);
+ };
+ 
+ int watchdog_register(struct watchdog *);
+-- 
+1.8.1.4
+

board/telit/evk-pro3/barebox-2013.04.0-0002-watchdog-add-at91sam9-watchdog-support.patch

@@ -0,0 +1,228 @@
+From e1d54ffb987c346c45c20968be34c50c62a91c07 Mon Sep 17 00:00:00 2001
+From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed, 14 Nov 2012 19:17:47 +0800
+Subject: [PATCH 2/5] watchdog: add at91sam9 watchdog support
+
+with keep alive support
+
+Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+---
+ drivers/watchdog/Kconfig        |   7 +++
+ drivers/watchdog/Makefile       |   1 +
+ drivers/watchdog/at91sam9_wdt.c | 131 ++++++++++++++++++++++++++++++++++++++++
+ drivers/watchdog/at91sam9_wdt.h |  38 ++++++++++++
+ 4 files changed, 177 insertions(+)
+ create mode 100644 drivers/watchdog/at91sam9_wdt.c
+ create mode 100644 drivers/watchdog/at91sam9_wdt.h
+
+diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
+index 0b4dc84..98a21d7 100644
+--- a/drivers/watchdog/Kconfig
++++ b/drivers/watchdog/Kconfig
+@@ -11,6 +11,13 @@ menuconfig WATCHDOG
+ 
+ if WATCHDOG
+ 
++config WATCHDOG_AT91SAM9X
++	tristate "AT91SAM9X / AT91CAP9 watchdog"
++	depends on ARCH_AT91
++	help
++	  Watchdog timer embedded into AT91SAM9X and AT91CAP9 chips. This will
++	  reboot your system when the timeout is reached.
++
+ config WATCHDOG_MXS28
+ 	bool "i.MX28"
+ 	depends on ARCH_IMX28
+diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
+index f522b88..3d15d52 100644
+--- a/drivers/watchdog/Makefile
++++ b/drivers/watchdog/Makefile
+@@ -1,3 +1,4 @@
+ obj-$(CONFIG_WATCHDOG) += wd_core.o
++obj-$(CONFIG_WATCHDOG_AT91SAM9X) += at91sam9_wdt.o
+ obj-$(CONFIG_WATCHDOG_MXS28) += im28wd.o
+ obj-$(CONFIG_WATCHDOG_IMX_RESET_SOURCE) += imxwd.o
+diff --git a/drivers/watchdog/at91sam9_wdt.c b/drivers/watchdog/at91sam9_wdt.c
+new file mode 100644
+index 0000000..203d83a
+--- /dev/null
++++ b/drivers/watchdog/at91sam9_wdt.c
+@@ -0,0 +1,131 @@
++/*
++ * (c) 2012 Juergen Beisert <kernel@pengutronix.de>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * Note: this driver works for the i.MX28 SoC. It might work for the
++ * i.MX23 Soc as well, but is not tested yet.
++ */
++
++#include <common.h>
++#include <init.h>
++#include <io.h>
++#include <errno.h>
++#include <malloc.h>
++#include <watchdog.h>
++
++#include "at91sam9_wdt.h"
++
++struct at91sam9_wdt {
++	struct watchdog wdt;
++	void __iomem *base;
++};
++
++#define to_at91sam9_wdt(h) container_of(h, struct at91sam9_wdt, wdt)
++
++#define wdt_read(at91wdt, field) \
++	__raw_readl(at91wdt->base + field)
++#define wdt_write(at91wdt, field, val) \
++	__raw_writel((val), at91wdt->base + field)
++
++static void at91sam9_wdt_keep_alive(struct watchdog *wdt)
++{
++	struct at91sam9_wdt *at91wdt = to_at91sam9_wdt(wdt);
++
++	wdt_write(at91wdt, AT91_WDT_CR, AT91_WDT_KEY | AT91_WDT_WDRSTT);
++}
++
++static int at91sam9_wdt_settimeout(struct watchdog *wdt, unsigned int timeout)
++{
++	struct at91sam9_wdt *at91wdt = to_at91sam9_wdt(wdt);
++	unsigned int reg;
++	unsigned int mr;
++
++	/* Check if disabled */
++	mr = wdt_read(at91wdt, AT91_WDT_MR);
++	if (mr & AT91_WDT_WDDIS) {
++		pr_err("sorry, watchdog is disabled\n");
++		return -EIO;
++	}
++
++	if (!timeout) {
++		wdt_write(at91wdt, AT91_WDT_MR, AT91_WDT_WDDIS);
++		return 0;
++	}
++
++	/*
++	 * All counting occurs at SLOW_CLOCK / 128 = 256 Hz
++	 *
++	 * Since WDV is a 12-bit counter, the maximum period is
++	 * 4096 / 256 = 16 seconds.
++	 */
++	reg = AT91_WDT_WDRSTEN	/* causes watchdog reset */
++		/* | AT91_WDT_WDRPROC	causes processor reset only */
++		| AT91_WDT_WDDBGHLT	/* disabled in debug mode */
++		| AT91_WDT_WDD		/* restart at any time */
++		| (timeout & AT91_WDT_WDV);  /* timer value */
++	wdt_write(at91wdt, AT91_WDT_MR, reg);
++
++	return 0;
++}
++
++static int at91sam9_wdt_probe(struct device_d *dev)
++{
++	struct at91sam9_wdt *priv;
++	struct watchdog *wdt;
++	int ret;
++	unsigned int mr;
++
++	priv = xzalloc(sizeof(struct at91sam9_wdt));
++	priv->base = dev_request_mem_region(dev, 0);
++	wdt = &priv->wdt;
++
++	wdt->set_timeout = at91sam9_wdt_settimeout;
++	wdt->keep_alive = at91sam9_wdt_keep_alive;
++
++	/* Check if disabled */
++	mr = wdt_read(priv, AT91_WDT_MR);
++	if (mr & AT91_WDT_WDDIS) {
++		dev_err(dev, "sorry, watchdog is disabled\n");
++		ret = -EIO;
++		goto err;
++	}
++
++	ret = watchdog_register(wdt);
++	if (ret != 0)
++		goto err;
++
++	dev->priv = priv;
++	return 0;
++
++err:
++	free(priv);
++	return ret;
++}
++
++static void at91sam9_wdt_remove(struct device_d *dev)
++{
++	struct at91sam9_wdt *priv= dev->priv;
++	watchdog_deregister(&priv->wdt);
++	free(priv);
++}
++
++static struct driver_d at91sam9_wdt_driver = {
++	.name	= "at91sam9_wdt",
++	.probe	= at91sam9_wdt_probe,
++	.remove = at91sam9_wdt_remove,
++};
++
++static int at91sam9_wdt_init(void)
++{
++	return platform_driver_register(&at91sam9_wdt_driver);
++}
++coredevice_initcall(at91sam9_wdt_init);
+diff --git a/drivers/watchdog/at91sam9_wdt.h b/drivers/watchdog/at91sam9_wdt.h
+new file mode 100644
+index 0000000..2b68c1a
+--- /dev/null
++++ b/drivers/watchdog/at91sam9_wdt.h
+@@ -0,0 +1,38 @@
++/*
++ * drivers/watchdog/at91sam9_wdt.h
++ *
++ * Copyright (C) 2007 Andrew Victor
++ * Copyright (C) 2007 Atmel Corporation.
++ *
++ * Watchdog Timer (WDT) - System peripherals regsters.
++ * Based on AT91SAM9261 datasheet revision D.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef AT91_WDT_H
++#define AT91_WDT_H
++
++#define AT91_WDT_CR		0x00			/* Watchdog Control Register */
++#define		AT91_WDT_WDRSTT		(1    << 0)		/* Restart */
++#define		AT91_WDT_KEY		(0xa5 << 24)		/* KEY Password */
++
++#define AT91_WDT_MR		0x04			/* Watchdog Mode Register */
++#define		AT91_WDT_WDV		(0xfff << 0)		/* Counter Value */
++#define		AT91_WDT_WDFIEN		(1     << 12)		/* Fault Interrupt Enable */
++#define		AT91_WDT_WDRSTEN	(1     << 13)		/* Reset Processor */
++#define		AT91_WDT_WDRPROC	(1     << 14)		/* Timer Restart */
++#define		AT91_WDT_WDDIS		(1     << 15)		/* Watchdog Disable */
++#define		AT91_WDT_WDD		(0xfff << 16)		/* Delta Value */
++#define		AT91_WDT_WDDBGHLT	(1     << 28)		/* Debug Halt */
++#define		AT91_WDT_WDIDLEHLT	(1     << 29)		/* Idle Halt */
++
++#define AT91_WDT_SR		0x08			/* Watchdog Status Register */
++#define		AT91_WDT_WDUNF		(1 << 0)		/* Watchdog Underflow */
++#define		AT91_WDT_WDERR		(1 << 1)		/* Watchdog Error */
++
++
++#endif
+-- 
+1.8.1.4
+

board/telit/evk-pro3/barebox-2013.04.0-0003-at91sam9260-9g20-add-wathdog-support.patch

@@ -0,0 +1,40 @@
+From 3338bcb05479f1149420d4a0ea3904cb9e42eef5 Mon Sep 17 00:00:00 2001
+From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed, 14 Nov 2012 19:18:22 +0800
+Subject: [PATCH 3/5] at91sam9260/9g20: add wathdog support
+
+Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+---
+ arch/arm/mach-at91/at91sam9260_devices.c | 12 ++++++++++++
+ 1 file changed, 12 insertions(+)
+
+diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
+index 1c375ee..5885f91 100644
+--- a/arch/arm/mach-at91/at91sam9260_devices.c
++++ b/arch/arm/mach-at91/at91sam9260_devices.c
+@@ -10,6 +10,7 @@
+  *
+  */
+ #include <common.h>
++#include <init.h>
+ #include <sizes.h>
+ #include <asm/armlinux.h>
+ #include <asm/hardware.h>
+@@ -397,3 +398,14 @@ void at91_add_device_mci(short mmc_id, struct atmel_mci_platform_data *data)
+ #else
+ void at91_add_device_mci(short mmc_id, struct atmel_mci_platform_data *data) {}
+ #endif
++
++#ifdef CONFIG_WATCHDOG_AT91SAM9X
++static int at91_add_device_watchdog(void)
++{
++	add_generic_device("at91sam9_wdt", DEVICE_ID_SINGLE, NULL,
++		AT91_WDT + AT91_BASE_SYS, 16, IORESOURCE_MEM, NULL);
++
++	return 0;
++}
++coredevice_initcall(at91_add_device_watchdog);
++#endif
+-- 
+1.8.1.4
+

board/telit/evk-pro3/barebox-2013.04.0-0004-at91sam9260-9g20-fix-wathdog-support.patch

@@ -0,0 +1,26 @@
+From e03bf0e3ad24898019b89eb9a6935d159c60268f Mon Sep 17 00:00:00 2001
+From: Fabio Porcedda <fabio.porcedda@gmail.com>
+Date: Thu, 17 Jan 2013 11:32:35 +0100
+Subject: [PATCH 4/5] at91sam9260/9g20: fix wathdog support
+
+Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
+---
+ arch/arm/mach-at91/at91sam9260_devices.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
+index 5885f91..df675d2 100644
+--- a/arch/arm/mach-at91/at91sam9260_devices.c
++++ b/arch/arm/mach-at91/at91sam9260_devices.c
+@@ -403,7 +403,7 @@ void at91_add_device_mci(short mmc_id, struct atmel_mci_platform_data *data) {}
+ static int at91_add_device_watchdog(void)
+ {
+ 	add_generic_device("at91sam9_wdt", DEVICE_ID_SINGLE, NULL,
+-		AT91_WDT + AT91_BASE_SYS, 16, IORESOURCE_MEM, NULL);
++		AT91_BASE_WDT, 16, IORESOURCE_MEM, NULL);
+ 
+ 	return 0;
+ }
+-- 
+1.8.1.4
+

board/telit/evk-pro3/barebox-2013.04.0-0005-watchdog-enable-for-evk-pro3.patch

@@ -0,0 +1,26 @@
+From 98c96ea36a4b3bb9b92dde849db5e8d6918b5168 Mon Sep 17 00:00:00 2001
+From: Fabio Porcedda <fabio.porcedda@gmail.com>
+Date: Thu, 17 Jan 2013 11:32:59 +0100
+Subject: [PATCH 5/5] watchdog: enable for evk-pro3
+
+Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
+---
+ arch/arm/configs/telit_evk_pro3_defconfig | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/arch/arm/configs/telit_evk_pro3_defconfig b/arch/arm/configs/telit_evk_pro3_defconfig
+index 050d176..436cecf 100644
+--- a/arch/arm/configs/telit_evk_pro3_defconfig
++++ b/arch/arm/configs/telit_evk_pro3_defconfig
+@@ -68,6 +68,8 @@ CONFIG_MCI_ATMEL=y
+ CONFIG_LED=y
+ CONFIG_LED_GPIO=y
+ CONFIG_LED_TRIGGERS=y
++CONFIG_WATCHDOG=y
++CONFIG_WATCHDOG_AT91SAM9X=y
+ CONFIG_FS_TFTP=y
+ CONFIG_FS_FAT=y
+ CONFIG_FS_FAT_LFN=y
+-- 
+1.8.1.4
+

board/telit/evk-pro3/linux-3.9.config

@@ -0,0 +1,201 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_KERNEL_LZO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EMBEDDED=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_AT91=y
+CONFIG_SOC_AT91SAM9260=y
+CONFIG_SOC_AT91SAM9263=y
+CONFIG_SOC_AT91SAM9G45=y
+CONFIG_SOC_AT91SAM9X5=y
+CONFIG_SOC_AT91SAM9N12=y
+CONFIG_MACH_AT91SAM_DT=y
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AT91_TIMER_HZ=128
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
+CONFIG_UACCESS_WITH_MEMCPY=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
+CONFIG_KEXEC=y
+CONFIG_AUTO_ZRELADDR=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+CONFIG_IPV6=y
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+CONFIG_IPV6_SIT_6RD=y
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_GLUEBI=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_ATMEL_PWM=y
+CONFIG_ATMEL_TCLIB=y
+CONFIG_EEPROM_93CX6=m
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+CONFIG_DAVICOM_PHY=y
+CONFIG_MICREL_PHY=y
+# CONFIG_WLAN is not set
+CONFIG_INPUT_POLLDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=480
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=272
+CONFIG_INPUT_JOYDEV=y
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_SERIO is not set
+CONFIG_LEGACY_PTY_COUNT=4
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_GPIO=y
+CONFIG_SPI=y
+CONFIG_SPI_ATMEL=y
+CONFIG_PINCTRL_AT91=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_AT91SAM9X_WATCHDOG=y
+CONFIG_SSB=m
+CONFIG_FB=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_ATMEL=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_ATMEL_LCDC=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_ACORN_8x8=y
+CONFIG_FONT_MINI_4x6=y
+CONFIG_LOGO=y
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_ACM=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_FTDI_SIO=y
+CONFIG_USB_SERIAL_PL2303=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_AT91=m
+CONFIG_USB_ATMEL_USBA=m
+CONFIG_USB_ETH=m
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_CDC_COMPOSITE=m
+CONFIG_USB_G_ACM_MS=m
+CONFIG_USB_G_MULTI=m
+CONFIG_USB_G_MULTI_CDC=y
+CONFIG_MMC=y
+CONFIG_MMC_ATMELMCI=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_AT91RM9200=y
+CONFIG_RTC_DRV_AT91SAM9=y
+CONFIG_DMADEVICES=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_FANOTIFY=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_UBIFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_USER=y
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_CCITT=m
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC7=m
+CONFIG_AVERAGE=y

board/telit/evk-pro3/readme.txt

@@ -0,0 +1,28 @@
+Buildroot board support for Telit EVK-PRO3 with Telit GE863-PRO3
+
+Official site:
+  http://www.telit.com/en/products.php?p_id=3&p_ac=show&p=10
+
+Build images:
+    make telit_evk_pro3_defconfig
+    make
+
+  images built:
+  - output/images/barebox.bin
+  - output/images/zImage
+  - output/images/rootfs.ubi
+
+
+Flash built images:
+  The first time you need to bootstrap from Telit Official Release 221.07.1007,
+  at the U-Boot prompt type:
+    U-Boot> loadb
+  send buildroot/output/images/barebox.bin
+    U-Boot> go 0x20200000
+
+  flash updated images using barebox through tftp:
+    barebox:/ erase dev/self0; cp /mnt/tftp/barebox.bin /dev/self0
+    barebox:/ erase /dev/nand0.kernel.bb; cp /mnt/tftp/zImage /dev/nand0.kernel.bb
+    barebox:/ erase /dev/nand0.rootfs.bb; cp /mnt/tftp/rootfs.ubi /dev/nand0.rootfs.bb
+    barebox:/ erase dev/env0
+    barebox:/ reset

boot/Config.in

@@ -1,10 +1,13 @@
 menu "Bootloaders"
 
 source "boot/at91bootstrap/Config.in"
+source "boot/at91bootstrap3/Config.in"
 source "boot/at91dataflashboot/Config.in"
 source "boot/barebox/Config.in"
+source "boot/boot-wrapper-aarch64/Config.in"
 source "boot/grub/Config.in"
 source "boot/lpc32xxcdl/Config.in"
+source "boot/mxs-bootlets/Config.in"
 source "boot/syslinux/Config.in"
 source "boot/uboot/Config.in"
 source "boot/xloader/Config.in"

boot/at91bootstrap/at91bootstrap-1.16-gcc-4.6.x-ldscript-fix.patch

@@ -0,0 +1,29 @@
+From b783d1f9bf985c0981e755bd2c13e091e9d6837f Mon Sep 17 00:00:00 2001
+From: Gregory Hermant <gregory.hermant@calao-systems.com>
+Date: Tue, 6 Nov 2012 09:38:50 +0100
+Subject: [PATCH] at91bootstrap: fix overlap linker issue
+
+The linker script of the at91bootstrap package has to be modified when
+built from gcc-4.6.x version. Indeed a section named text.startup is
+created and has to be added into the text section.
+
+Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
+---
+ elf32-littlearm.lds |    1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/elf32-littlearm.lds b/elf32-littlearm.lds
+index a33952f..4f3ba25 100644
+--- a/elf32-littlearm.lds
++++ b/elf32-littlearm.lds
+@@ -7,6 +7,7 @@ SECTIONS
+ 	.text : { 
+ 		_stext = .;
+ 		*(.text)
++		*(.text*)
+ 		*(.rodata)                 /* read-only data (constants) */
+ 		*(.rodata*)
+ 		. = ALIGN(4);
+-- 
+1.7.9.5
+

boot/at91bootstrap/at91bootstrap-1.16-u-boot-relocation-fix.patch

@@ -1,3 +1,8 @@
+From d4e4a1aad559e35d84b445d1379be94ad036984e Mon Sep 17 00:00:00 2001
+From: Alexandre Belloni <alexandre.belloni@piout.net>
+Date: Thu, 25 Oct 2012 22:57:14 +0200
+Subject: [PATCH] u-boot relocation fix
+
 Every AT91SAM plaforms were broken between 2010.12 and 2011.03 because
 of the relocation changes.
 
@@ -8,13 +13,11 @@ I didn't know what to do with at91sam9m10g45ek as it doesn't seems to be
 converted yet. But anyway, that means that it is either not working or
 doesn't care so changing it here shouldn't harm.
 
-I also chose to "repartition" the dataflash. u-boot is now living at
-0x4000, letting 16kB for the bootstrap. We also have to increase the
-IMG_SIZE as u-boot as grown larger than the default value.
-As requested on the u-boot ML, we assume that it could be up to 512kB
-big.
+We also have to increase the IMG_SIZE as u-boot as grown larger than the
+default value. As requested on the u-boot ML, we assume that it could
+be up to 495kB big.
 
-It means that now, you have to flash your kernel at 0x0008C000 instead
+It means that now, you have to flash your kernel at 0x00084000 instead
 of 0x00042000. And so you also have to load it from that adress from
 u-boot.
 
@@ -22,36 +25,34 @@ Then, remember that you could decrease IMG_SIZE to boot faster.
 
 Signed-off-by: Alexandre Belloni <alexandre.belloni@piout.net>
 ---
- board/at91sam9260ek/dataflash/at91sam9260ek.h      |    6 +++---
+ board/at91sam9260ek/dataflash/at91sam9260ek.h      |    4 ++--
  board/at91sam9260ek/nandflash/at91sam9260ek.h      |    2 +-
- board/at91sam9261ek/dataflash/at91sam9261ek.h      |    6 +++---
+ board/at91sam9261ek/dataflash/at91sam9261ek.h      |    4 ++--
  board/at91sam9261ek/nandflash/at91sam9261ek.h      |    2 +-
- board/at91sam9263ek/dataflash/at91sam9263ek.h      |    6 +++---
+ board/at91sam9263ek/dataflash/at91sam9263ek.h      |    4 ++--
  board/at91sam9263ek/nandflash/at91sam9263ek.h      |    2 +-
- board/at91sam9g10ek/dataflash/at91sam9g10ek.h      |    6 +++---
+ board/at91sam9g10ek/dataflash/at91sam9g10ek.h      |    4 ++--
  board/at91sam9g10ek/nandflash/at91sam9g10ek.h      |    2 +-
- board/at91sam9g20ek/dataflash/at91sam9g20ek.h      |    6 +++---
+ board/at91sam9g20ek/dataflash/at91sam9g20ek.h      |    4 ++--
  board/at91sam9g20ek/nandflash/at91sam9g20ek.h      |    2 +-
- board/at91sam9m10ekes/dataflash/at91sam9m10ekes.h  |    4 ++--
- .../at91sam9m10g45ek/dataflash/at91sam9m10g45ek.h  |    4 ++--
- board/at91sam9rlek/dataflash/at91sam9rlek.h        |    6 +++---
+ board/at91sam9m10ekes/dataflash/at91sam9m10ekes.h  |    2 +-
+ .../at91sam9m10g45ek/dataflash/at91sam9m10g45ek.h  |    2 +-
+ board/at91sam9rlek/dataflash/at91sam9rlek.h        |    4 ++--
  board/at91sam9rlek/nandflash/at91sam9rlek.h        |    2 +-
- board/at91sam9xeek/dataflash/at91sam9xeek.h        |    6 +++---
+ board/at91sam9xeek/dataflash/at91sam9xeek.h        |    4 ++--
  board/at91sam9xeek/nandflash/at91sam9xeek.h        |    2 +-
- 16 files changed, 32 insertions(+), 32 deletions(-)
+ 16 files changed, 23 insertions(+), 23 deletions(-)
 
 diff --git a/board/at91sam9260ek/dataflash/at91sam9260ek.h b/board/at91sam9260ek/dataflash/at91sam9260ek.h
-index 1834246..5c52bc6 100644
+index 1834246..91081a1 100644
 --- a/board/at91sam9260ek/dataflash/at91sam9260ek.h
 +++ b/board/at91sam9260ek/dataflash/at91sam9260ek.h
-@@ -73,11 +73,11 @@
- /* ******************************************************************* */
+@@ -74,10 +74,10 @@
  #define AT91C_SPI_PCS_DATAFLASH		AT91C_SPI_PCS1_DATAFLASH	/* Boot on SPI NCS0 */
  
--#define IMG_ADDRESS 		0x8400			/* Image Address in DataFlash */
+ #define IMG_ADDRESS 		0x8400			/* Image Address in DataFlash */
 -#define	IMG_SIZE		0x33900			/* Image Size in DataFlash    */
-+#define IMG_ADDRESS 		0x4000			/* Image Address in DataFlash */
-+#define	IMG_SIZE		0x80000			/* Image Size in DataFlash    */
++#define	IMG_SIZE		0x7BC00			/* Image Size in DataFlash    */
  
  #define MACH_TYPE       0x44B       /* AT91SAM9260-EK */
 -#define JUMP_ADDR		0x23F00000		/* Final Jump Address 	      */
@@ -73,17 +74,15 @@ index 2cac601..f8fdff2 100644
  /* ******************************************************************* */
  /* Application Settings                                                */
 diff --git a/board/at91sam9261ek/dataflash/at91sam9261ek.h b/board/at91sam9261ek/dataflash/at91sam9261ek.h
-index 8ce30e9..675f80b 100644
+index 8ce30e9..276ba3d 100644
 --- a/board/at91sam9261ek/dataflash/at91sam9261ek.h
 +++ b/board/at91sam9261ek/dataflash/at91sam9261ek.h
-@@ -96,11 +96,11 @@
- /* ******************************************************************* */
+@@ -97,10 +97,10 @@
  #define AT91C_SPI_PCS_DATAFLASH		AT91C_SPI_PCS0_DATAFLASH	/* Boot on SPI NCS0 */
  
--#define IMG_ADDRESS 		0x8400			/* Image Address in DataFlash */
+ #define IMG_ADDRESS 		0x8400			/* Image Address in DataFlash */
 -#define	IMG_SIZE		0x33900			/* Image Size in DataFlash    */
-+#define IMG_ADDRESS 		0x4000			/* Image Address in DataFlash */
-+#define	IMG_SIZE		0x80000			/* Image Size in DataFlash    */
++#define	IMG_SIZE		0x7BC00			/* Image Size in DataFlash    */
  
  #define MACH_TYPE       0x350       /* AT91SAM9261-EK */
 -#define JUMP_ADDR		0x23F00000		/* Final Jump Address 	      */
@@ -105,17 +104,15 @@ index badc3ac..e628c97 100644
  /* ******************************************************************* */
  /* Application Settings                                                */
 diff --git a/board/at91sam9263ek/dataflash/at91sam9263ek.h b/board/at91sam9263ek/dataflash/at91sam9263ek.h
-index 5c9da4b..d07b5d1 100644
+index 5c9da4b..870f9e2 100644
 --- a/board/at91sam9263ek/dataflash/at91sam9263ek.h
 +++ b/board/at91sam9263ek/dataflash/at91sam9263ek.h
-@@ -95,11 +95,11 @@
- /* ******************************************************************* */
+@@ -96,10 +96,10 @@
  #define AT91C_SPI_PCS_DATAFLASH		AT91C_SPI_PCS0_DATAFLASH	/* Boot on SPI NCS0 */
  
--#define IMG_ADDRESS 			0x8400			/* Image Address in DataFlash */
+ #define IMG_ADDRESS 			0x8400			/* Image Address in DataFlash */
 -#define	IMG_SIZE			0x33900			/* Image Size in DataFlash    */
-+#define IMG_ADDRESS 			0x4000			/* Image Address in DataFlash */
-+#define	IMG_SIZE			0x80000			/* Image Size in DataFlash    */
++#define	IMG_SIZE			0x7BC00			/* Image Size in DataFlash    */
  
  #define MACH_TYPE       		0x4B2       		/* AT91SAM9263-EK */
 -#define JUMP_ADDR			0x23F00000		/* Final Jump Address 	      */
@@ -137,17 +134,15 @@ index 505afc7..8ab4f46 100644
  /* ******************************************************************* */
  /* Application Settings                                                */
 diff --git a/board/at91sam9g10ek/dataflash/at91sam9g10ek.h b/board/at91sam9g10ek/dataflash/at91sam9g10ek.h
-index b2faf44..0882644 100644
+index b2faf44..f4f556b 100644
 --- a/board/at91sam9g10ek/dataflash/at91sam9g10ek.h
 +++ b/board/at91sam9g10ek/dataflash/at91sam9g10ek.h
-@@ -97,11 +97,11 @@
- /* ******************************************************************* */
+@@ -98,10 +98,10 @@
  #define AT91C_SPI_PCS_DATAFLASH		AT91C_SPI_PCS0_DATAFLASH	/* Boot on SPI NCS0 */
  
--#define IMG_ADDRESS 		0x8400			/* Image Address in DataFlash */
+ #define IMG_ADDRESS 		0x8400			/* Image Address in DataFlash */
 -#define	IMG_SIZE		0x33900			/* Image Size in DataFlash    */
-+#define IMG_ADDRESS 		0x4000			/* Image Address in DataFlash */
-+#define	IMG_SIZE		0x80000			/* Image Size in DataFlash    */
++#define	IMG_SIZE		0x7BC00			/* Image Size in DataFlash    */
  
  #define MACH_TYPE       0x350       /* AT91SAM9261-EK */
 -#define JUMP_ADDR		0x23F00000		/* Final Jump Address 	      */
@@ -169,17 +164,15 @@ index 66c40a3..6c3ecda 100644
  /* ******************************************************************* */
  /* Application Settings                                                */
 diff --git a/board/at91sam9g20ek/dataflash/at91sam9g20ek.h b/board/at91sam9g20ek/dataflash/at91sam9g20ek.h
-index eea0439..44bd578 100644
+index eea0439..7fc70d6 100644
 --- a/board/at91sam9g20ek/dataflash/at91sam9g20ek.h
 +++ b/board/at91sam9g20ek/dataflash/at91sam9g20ek.h
-@@ -74,11 +74,11 @@
- /* ******************************************************************* */
+@@ -75,10 +75,10 @@
  #define AT91C_SPI_PCS_DATAFLASH		AT91C_SPI_PCS1_DATAFLASH	/* Boot on SPI NCS1 */
  
--#define IMG_ADDRESS 		0x8400			/* Image Address in DataFlash */
+ #define IMG_ADDRESS 		0x8400			/* Image Address in DataFlash */
 -#define	IMG_SIZE		0x33900			/* Image Size in DataFlash */
-+#define IMG_ADDRESS 		0x4000			/* Image Address in DataFlash */
-+#define	IMG_SIZE		0x80000			/* Image Size in DataFlash */
++#define	IMG_SIZE		0x7BC00			/* Image Size in DataFlash */
  
  #define MACH_TYPE		0x658			/* AT91SAM9G20-EK */
 -#define JUMP_ADDR		0x23F00000		/* Final Jump Address */
@@ -201,47 +194,41 @@ index 31bd499..e797e4d 100644
  /* ******************************************************************* */
  /* Application Settings                                                */
 diff --git a/board/at91sam9m10ekes/dataflash/at91sam9m10ekes.h b/board/at91sam9m10ekes/dataflash/at91sam9m10ekes.h
-index a60fd41..144dd6d 100644
+index a60fd41..5587a00 100644
 --- a/board/at91sam9m10ekes/dataflash/at91sam9m10ekes.h
 +++ b/board/at91sam9m10ekes/dataflash/at91sam9m10ekes.h
-@@ -88,8 +88,8 @@
- /* ******************************************************************* */
+@@ -89,7 +89,7 @@
  #define AT91C_SPI_PCS_DATAFLASH		AT91C_SPI_PCS0_DATAFLASH	/* Boot on SPI NCS0 */
  
--#define IMG_ADDRESS 		0x8400			/* Image Address in DataFlash */
+ #define IMG_ADDRESS 		0x8400			/* Image Address in DataFlash */
 -#define	IMG_SIZE		0x33900			/* Image Size in DataFlash */
-+#define IMG_ADDRESS 		0x4000			/* Image Address in DataFlash */
-+#define	IMG_SIZE		0x80000			/* Image Size in DataFlash */
++#define	IMG_SIZE		0x7BC00			/* Image Size in DataFlash */
  
  #define MACH_TYPE		0x9CD			/* AT91SAM9M10-EKES */
  #define JUMP_ADDR		0x73F00000		/* Final Jump Address */
 diff --git a/board/at91sam9m10g45ek/dataflash/at91sam9m10g45ek.h b/board/at91sam9m10g45ek/dataflash/at91sam9m10g45ek.h
-index 5c726b5..3152b79 100644
+index 5c726b5..9090097 100644
 --- a/board/at91sam9m10g45ek/dataflash/at91sam9m10g45ek.h
 +++ b/board/at91sam9m10g45ek/dataflash/at91sam9m10g45ek.h
-@@ -84,8 +84,8 @@
- /* ******************************************************************* */
+@@ -85,7 +85,7 @@
  #define AT91C_SPI_PCS_DATAFLASH		AT91C_SPI_PCS0_DATAFLASH	/* Boot on SPI NCS0 */
  
--#define IMG_ADDRESS 		0x8400			/* Image Address in DataFlash */
+ #define IMG_ADDRESS 		0x8400			/* Image Address in DataFlash */
 -#define	IMG_SIZE		0x33900			/* Image Size in DataFlash */
-+#define IMG_ADDRESS 		0x4000			/* Image Address in DataFlash */
-+#define	IMG_SIZE		0x80000			/* Image Size in DataFlash */
++#define	IMG_SIZE		0x7BC00			/* Image Size in DataFlash */
  
  #define MACH_TYPE		0x726			/* AT91SAM9M10G45-EK */
  #define JUMP_ADDR		0x73F00000		/* Final Jump Address */
 diff --git a/board/at91sam9rlek/dataflash/at91sam9rlek.h b/board/at91sam9rlek/dataflash/at91sam9rlek.h
-index 05c42dc..be277b6 100644
+index 05c42dc..150f17e 100644
 --- a/board/at91sam9rlek/dataflash/at91sam9rlek.h
 +++ b/board/at91sam9rlek/dataflash/at91sam9rlek.h
-@@ -88,11 +88,11 @@
- /* ******************************************************************* */
+@@ -89,10 +89,10 @@
  #define AT91C_SPI_PCS_DATAFLASH		AT91C_SPI_PCS0_DATAFLASH	/* Boot on SPI NCS0 */
  
--#define IMG_ADDRESS 	0x8400		/* Image Address in DataFlash */
+ #define IMG_ADDRESS 	0x8400		/* Image Address in DataFlash */
 -#define	IMG_SIZE	0x33900		/* Image Size in DataFlash    */
-+#define IMG_ADDRESS 	0x4000		/* Image Address in DataFlash */
-+#define	IMG_SIZE	0x80000		/* Image Size in DataFlash    */
++#define	IMG_SIZE	0x7BC00		/* Image Size in DataFlash    */
  
  #define MACH_TYPE       1326       	/* AT91SAM9RL-EK */
 -#define JUMP_ADDR	0x23F00000	/* Final Jump Address 	      */
@@ -263,17 +250,15 @@ index 656b4ba..594db8f 100644
  /* ******************************************************************* */
  /* Application Settings                                                */
 diff --git a/board/at91sam9xeek/dataflash/at91sam9xeek.h b/board/at91sam9xeek/dataflash/at91sam9xeek.h
-index 27d1822..e3172da 100644
+index 27d1822..08e515d 100644
 --- a/board/at91sam9xeek/dataflash/at91sam9xeek.h
 +++ b/board/at91sam9xeek/dataflash/at91sam9xeek.h
-@@ -73,11 +73,11 @@
- /* ******************************************************************* */
+@@ -74,10 +74,10 @@
  #define AT91C_SPI_PCS_DATAFLASH		AT91C_SPI_PCS1_DATAFLASH	/* Boot on SPI NCS1 */
  
--#define IMG_ADDRESS 		0x8400			/* Image Address in DataFlash */
+ #define IMG_ADDRESS 		0x8400			/* Image Address in DataFlash */
 -#define	IMG_SIZE		0x33900			/* Image Size in DataFlash    */
-+#define IMG_ADDRESS 		0x4000			/* Image Address in DataFlash */
-+#define	IMG_SIZE		0x80000			/* Image Size in DataFlash    */
++#define	IMG_SIZE		0x7BC00			/* Image Size in DataFlash    */
  
  #define MACH_TYPE		0x44B			/* AT91SAM9XE-EK same id as AT91SAM9260-EK*/
 -#define JUMP_ADDR		0x23F00000		/* Final Jump Address 	      */
@@ -295,5 +280,5 @@ index 5dbc63e..9fac7cb 100644
  /* ******************************************************************* */
  /* Application Settings                                                */
 -- 
-1.7.5.4
+1.7.9.5
 

boot/at91bootstrap/at91bootstrap.mk

@@ -1,10 +1,11 @@
-#############################################################
+################################################################################
 #
 # at91bootstrap
 #
-#############################################################
+################################################################################
+
 AT91BOOTSTRAP_VERSION = 1.16
-AT91BOOTSTRAP_SITE = http://www.atmel.com/dyn/resources/prod_documents/
+AT91BOOTSTRAP_SITE = ftp://www.at91.com/pub/at91bootstrap/
 AT91BOOTSTRAP_SOURCE = AT91Bootstrap$(AT91BOOTSTRAP_VERSION).zip
 
 AT91BOOTSTRAP_BOARD = $(call qstrip,$(BR2_TARGET_AT91BOOTSTRAP_BOARD))
@@ -31,14 +32,14 @@ AT91BOOTSTRAP_POST_PATCH_HOOKS += AT91BOOTSTRAP_APPLY_CUSTOM_PATCHES
 endif
 
 define AT91BOOTSTRAP_BUILD_CMDS
-	$(MAKE) CROSS_COMPILE=$(TARGET_CROSS) -C $(@D)/$(AT91BOOTSTRAP_MAKE_SUBDIR)
+	$(MAKE1) CROSS_COMPILE=$(TARGET_CROSS) -C $(@D)/$(AT91BOOTSTRAP_MAKE_SUBDIR)
 endef
 
 define AT91BOOTSTRAP_INSTALL_IMAGES_CMDS
 	cp $(@D)/$(AT91BOOTSTRAP_BINARY) $(BINARIES_DIR)
 endef
 
-$(eval $(call GENTARGETS))
+$(eval $(generic-package))
 
 ifeq ($(BR2_TARGET_AT91BOOTSTRAP),y)
 # we NEED a board name unless we're at make source

boot/at91bootstrap3/Config.in

@@ -0,0 +1,53 @@
+config BR2_TARGET_AT91BOOTSTRAP3
+	depends on BR2_arm926t
+	bool "AT91 Bootstrap 3"
+	help
+	  AT91Bootstrap is a first level bootloader for the Atmel AT91
+	  devices. It integrates algorithms for:
+	  - Device initialization such as clock configuration, PIO settings...
+	  - Peripheral drivers such as PIO, PMC or SDRAMC...
+	  - Physical media algorithm such as DataFlash, NandFlash, NOR Flash...
+
+if BR2_TARGET_AT91BOOTSTRAP3
+
+config BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_PATCH_DIR
+	string "custom patch dir"
+	help
+	  If your board requires custom patches, add the path to the
+	  directory containing the patches here. The patches must be
+	  named at91bootstrap3-<something>.patch.
+
+	  Most users may leave this empty
+
+#
+# Configuration selection
+#
+
+choice
+	prompt "AT91 Bootstrap 3 configuration"
+	default BR2_TARGET_AT91BOOTSTRAP3_USE_DEFCONFIG
+
+config BR2_TARGET_AT91BOOTSTRAP3_USE_DEFCONFIG
+	bool "Using a defconfig"
+
+config BR2_TARGET_AT91BOOTSTRAP3_USE_CUSTOM_CONFIG
+	bool "Using a custom config file"
+
+endchoice
+
+config BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG
+	string "Defconfig name"
+	depends on BR2_TARGET_AT91BOOTSTRAP3_USE_DEFCONFIG
+	help
+	  Name of the at91bootstrap3 defconfig file to use, without the
+	  trailing _defconfig.  The defconfig is located at
+	  board/<processor>/<board>_defconfig in the at91bootstrap3
+	  tree.
+
+config BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_CONFIG_FILE
+	string "Configuration file path"
+	depends on BR2_TARGET_AT91BOOTSTRAP3_USE_CUSTOM_CONFIG
+	help
+	  Path to the at91bootstrap3 configuration file
+
+endif # BR2_TARGET_AT91BOOTSTRAP3

boot/at91bootstrap3/at91bootstrap3-u-boot-relocation-fix.patch

@@ -0,0 +1,747 @@
+Every AT91SAM plaforms were broken between 2010.12 and 2011.03 because
+of the relocation changes.
+
+We have to get JUMP_ADDR consistent with what is used by u-boot
+(CONFIG_SYS_TEXT_BASE).
+
+I also chose to "repartition" the dataflash. u-boot is now living at
+0x4000, letting 16kB for the bootstrap. We also have to increase the
+IMG_SIZE as u-boot as grown larger than the default value.
+As requested on the u-boot ML, we assume that it could be up to 512kB
+big.
+
+It means that now, you have to flash your kernel at 0x0008C000 instead
+of 0x00042000. And so you also have to load it from that address from
+u-boot.
+
+Then, remember that you could decrease IMG_SIZE to boot faster.
+
+Signed-off-by: Alexandre Belloni <alexandre.belloni@piout.net>
+Signed-off-by: Simon Dawson <spdawson@gmail.com>
+
+diff -Nurp a/board/afeb9260/afeb9260_defconfig b/board/afeb9260/afeb9260_defconfig
+--- a/board/afeb9260/afeb9260_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/afeb9260/afeb9260_defconfig	2012-07-25 20:52:17.967694276 +0100
+@@ -97,9 +97,9 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_ADDRESS="0x00004000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_APP_CHECK=y
+ # CONFIG_LONG_TEST is not set
+ # CONFIG_DEBUG is not set
+diff -Nurp a/board/at91cap9adk/at91cap9adk_defconfig b/board/at91cap9adk/at91cap9adk_defconfig
+--- a/board/at91cap9adk/at91cap9adk_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91cap9adk/at91cap9adk_defconfig	2012-07-25 20:52:30.603693814 +0100
+@@ -96,8 +96,8 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
+-CONFIG_IMG_SIZE="0x00040000"
++CONFIG_IMG_ADDRESS="0x00004000"
++CONFIG_IMG_SIZE="0x00080000"
+ CONFIG_JUMP_ADDR="0x73F00000"
+ CONFIG_APP_CHECK=y
+ # CONFIG_LONG_TEST is not set
+diff -Nurp a/board/at91cap9adk/at91cap9df_defconfig b/board/at91cap9adk/at91cap9df_defconfig
+--- a/board/at91cap9adk/at91cap9df_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91cap9adk/at91cap9df_defconfig	2012-07-25 20:52:23.807694041 +0100
+@@ -96,8 +96,8 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
+-CONFIG_IMG_SIZE="0x00040000"
++CONFIG_IMG_ADDRESS="0x00004000"
++CONFIG_IMG_SIZE="0x00080000"
+ CONFIG_JUMP_ADDR="0x73F00000"
+ CONFIG_APP_CHECK=y
+ # CONFIG_LONG_TEST is not set
+diff -Nurp a/board/at91cap9adk/at91cap9f_defconfig b/board/at91cap9adk/at91cap9f_defconfig
+--- a/board/at91cap9adk/at91cap9f_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91cap9adk/at91cap9f_defconfig	2012-07-25 21:25:20.839605245 +0100
+@@ -72,7 +72,7 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+ CONFIG_IMG_ADDRESS="0x00008000"
+-CONFIG_IMG_SIZE="0x00040000"
++CONFIG_IMG_SIZE="0x00080000"
+ CONFIG_JUMP_ADDR="0x73F00000"
+ CONFIG_APP_CHECK=y
+ # CONFIG_LONG_TEST is not set
+diff -Nurp a/board/at91cap9stk/at91cap9stk_defconfig b/board/at91cap9stk/at91cap9stk_defconfig
+--- a/board/at91cap9stk/at91cap9stk_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91cap9stk/at91cap9stk_defconfig	2012-07-25 20:52:59.663692456 +0100
+@@ -96,8 +96,8 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
+-CONFIG_IMG_SIZE="0x00040000"
++CONFIG_IMG_ADDRESS="0x00004000"
++CONFIG_IMG_SIZE="0x00080000"
+ CONFIG_JUMP_ADDR="0x73F00000"
+ CONFIG_APP_CHECK=y
+ # CONFIG_LONG_TEST is not set
+diff -Nurp a/board/at91cap9stk/at91cap9stkdf_defconfig b/board/at91cap9stk/at91cap9stkdf_defconfig
+--- a/board/at91cap9stk/at91cap9stkdf_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91cap9stk/at91cap9stkdf_defconfig	2012-07-25 20:52:52.255692671 +0100
+@@ -96,8 +96,8 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
+-CONFIG_IMG_SIZE="0x00040000"
++CONFIG_IMG_ADDRESS="0x00004000"
++CONFIG_IMG_SIZE="0x00080000"
+ CONFIG_JUMP_ADDR="0x73F00000"
+ CONFIG_APP_CHECK=y
+ # CONFIG_LONG_TEST is not set
+diff -Nurp a/board/at91cap9stk/at91cap9stkf_defconfig b/board/at91cap9stk/at91cap9stkf_defconfig
+--- a/board/at91cap9stk/at91cap9stkf_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91cap9stk/at91cap9stkf_defconfig	2012-07-25 21:25:35.235605140 +0100
+@@ -72,7 +72,7 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+ CONFIG_IMG_ADDRESS="0x00008000"
+-CONFIG_IMG_SIZE="0x00040000"
++CONFIG_IMG_SIZE="0x00080000"
+ CONFIG_JUMP_ADDR="0x73F00000"
+ CONFIG_APP_CHECK=y
+ # CONFIG_LONG_TEST is not set
+diff -Nurp a/board/at91sam9260ek/at91sam9260dfc_defconfig b/board/at91sam9260ek/at91sam9260dfc_defconfig
+--- a/board/at91sam9260ek/at91sam9260dfc_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9260ek/at91sam9260dfc_defconfig	2012-07-25 20:35:23.259739521 +0100
+@@ -97,9 +97,9 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_ADDRESS="0x00004000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_APP_CHECK=y
+ # CONFIG_LONG_TEST is not set
+ # CONFIG_DEBUG is not set
+diff -Nurp a/board/at91sam9260ek/at91sam9260df_defconfig b/board/at91sam9260ek/at91sam9260df_defconfig
+--- a/board/at91sam9260ek/at91sam9260df_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9260ek/at91sam9260df_defconfig	2012-07-25 20:34:19.231742964 +0100
+@@ -102,11 +102,11 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
++CONFIG_IMG_ADDRESS="0x00004000"
+ CONFIG_SETTING_ADDRESS="0x00408400"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_GLBDRV_ADDR="0x20058000"
+ # CONFIG_LONG_TEST is not set
+ # CONFIG_DEBUG is not set
+diff -Nurp a/board/at91sam9260ek/at91sam9260ek_defconfig b/board/at91sam9260ek/at91sam9260ek_defconfig
+--- a/board/at91sam9260ek/at91sam9260ek_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9260ek/at91sam9260ek_defconfig	2012-07-25 20:32:17.711747794 +0100
+@@ -102,11 +102,11 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
++CONFIG_IMG_ADDRESS="0x00004000"
+ CONFIG_SETTING_ADDRESS="0x00408400"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_GLBDRV_ADDR="0x20058000"
+ # CONFIG_LONG_TEST is not set
+ # CONFIG_DEBUG is not set
+diff -Nurp a/board/at91sam9260ek/at91sam9260nf_defconfig b/board/at91sam9260ek/at91sam9260nf_defconfig
+--- a/board/at91sam9260ek/at91sam9260nf_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9260ek/at91sam9260nf_defconfig	2012-07-25 21:25:57.079604719 +0100
+@@ -87,8 +87,8 @@ CONFIG_LOAD_UBOOT=y
+ CONFIG_IMG_ADDRESS="0x00020000"
+ CONFIG_SETTING_ADDRESS="0x01FE0000"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_GLBDRV_ADDR="0x20058000"
+ # CONFIG_LONG_TEST is not set
+ # CONFIG_DEBUG is not set
+diff -Nurp a/board/at91sam9261ek/at91sam9261dfc_defconfig b/board/at91sam9261ek/at91sam9261dfc_defconfig
+--- a/board/at91sam9261ek/at91sam9261dfc_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9261ek/at91sam9261dfc_defconfig	2012-07-25 20:37:07.515735228 +0100
+@@ -97,9 +97,9 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_ADDRESS="0x00004000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_APP_CHECK=y
+ # CONFIG_LONG_TEST is not set
+ CONFIG_DEBUG=y
+diff -Nurp a/board/at91sam9261ek/at91sam9261df_defconfig b/board/at91sam9261ek/at91sam9261df_defconfig
+--- a/board/at91sam9261ek/at91sam9261df_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9261ek/at91sam9261df_defconfig	2012-07-25 20:36:44.351735615 +0100
+@@ -102,11 +102,11 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
++CONFIG_IMG_ADDRESS="0x00004000"
+ CONFIG_SETTING_ADDRESS="0x00408400"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_GLBDRV_ADDR="0x20058000"
+ # CONFIG_LONG_TEST is not set
+ CONFIG_DEBUG=y
+diff -Nurp a/board/at91sam9261ek/at91sam9261ek_defconfig b/board/at91sam9261ek/at91sam9261ek_defconfig
+--- a/board/at91sam9261ek/at91sam9261ek_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9261ek/at91sam9261ek_defconfig	2012-07-25 20:36:09.111737459 +0100
+@@ -102,11 +102,11 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
++CONFIG_IMG_ADDRESS="0x00004000"
+ CONFIG_SETTING_ADDRESS="0x00408400"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_GLBDRV_ADDR="0x20058000"
+ # CONFIG_LONG_TEST is not set
+ CONFIG_DEBUG=y
+diff -Nurp a/board/at91sam9261ek/at91sam9261nf_defconfig b/board/at91sam9261ek/at91sam9261nf_defconfig
+--- a/board/at91sam9261ek/at91sam9261nf_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9261ek/at91sam9261nf_defconfig	2012-07-25 21:24:45.843607437 +0100
+@@ -86,8 +86,8 @@ CONFIG_LOAD_UBOOT=y
+ CONFIG_IMG_ADDRESS="0x00020000"
+ CONFIG_SETTING_ADDRESS="0x01FE0000"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_GLBDRV_ADDR="0x20058000"
+ # CONFIG_LONG_TEST is not set
+ CONFIG_DEBUG=y
+diff -Nurp a/board/at91sam9263ek/at91sam9263dfc_defconfig b/board/at91sam9263ek/at91sam9263dfc_defconfig
+--- a/board/at91sam9263ek/at91sam9263dfc_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9263ek/at91sam9263dfc_defconfig	2012-07-25 20:38:55.555730059 +0100
+@@ -100,9 +100,9 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_ADDRESS="0x00004000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_APP_CHECK=y
+ # CONFIG_LONG_TEST is not set
+ CONFIG_DEBUG=y
+diff -Nurp a/board/at91sam9263ek/at91sam9263df_defconfig b/board/at91sam9263ek/at91sam9263df_defconfig
+--- a/board/at91sam9263ek/at91sam9263df_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9263ek/at91sam9263df_defconfig	2012-07-25 20:38:37.395730195 +0100
+@@ -105,11 +105,11 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
++CONFIG_IMG_ADDRESS="0x00004000"
+ CONFIG_SETTING_ADDRESS="0x00408400"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_GLBDRV_ADDR="0x2006b000"
+ # CONFIG_LONG_TEST is not set
+ CONFIG_DEBUG=y
+diff -Nurp a/board/at91sam9263ek/at91sam9263ek_defconfig b/board/at91sam9263ek/at91sam9263ek_defconfig
+--- a/board/at91sam9263ek/at91sam9263ek_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9263ek/at91sam9263ek_defconfig	2012-07-25 20:38:08.379732395 +0100
+@@ -105,11 +105,11 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
++CONFIG_IMG_ADDRESS="0x00004000"
+ CONFIG_SETTING_ADDRESS="0x00408400"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_GLBDRV_ADDR="0x2006b000"
+ # CONFIG_LONG_TEST is not set
+ CONFIG_DEBUG=y
+diff -Nurp a/board/at91sam9263ek/at91sam9263nf_defconfig b/board/at91sam9263ek/at91sam9263nf_defconfig
+--- a/board/at91sam9263ek/at91sam9263nf_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9263ek/at91sam9263nf_defconfig	2012-07-25 21:25:39.195605069 +0100
+@@ -89,8 +89,8 @@ CONFIG_LOAD_UBOOT=y
+ CONFIG_IMG_ADDRESS="0x00020000"
+ CONFIG_SETTING_ADDRESS="0x01FE0000"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_GLBDRV_ADDR="0x2006b000"
+ # CONFIG_LONG_TEST is not set
+ CONFIG_DEBUG=y
+diff -Nurp a/board/at91sam9g10ek/at91sam9g10df_defconfig b/board/at91sam9g10ek/at91sam9g10df_defconfig
+--- a/board/at91sam9g10ek/at91sam9g10df_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9g10ek/at91sam9g10df_defconfig	2012-07-25 20:40:18.087726292 +0100
+@@ -102,11 +102,11 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
++CONFIG_IMG_ADDRESS="0x00004000"
+ CONFIG_SETTING_ADDRESS="0x00408400"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_GLBDRV_ADDR="0x20068000"
+ # CONFIG_LONG_TEST is not set
+ CONFIG_DEBUG=y
+diff -Nurp a/board/at91sam9g10ek/at91sam9g10ek_defconfig b/board/at91sam9g10ek/at91sam9g10ek_defconfig
+--- a/board/at91sam9g10ek/at91sam9g10ek_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9g10ek/at91sam9g10ek_defconfig	2012-07-25 20:39:53.543727636 +0100
+@@ -102,11 +102,11 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
++CONFIG_IMG_ADDRESS="0x00004000"
+ CONFIG_SETTING_ADDRESS="0x00408400"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_GLBDRV_ADDR="0x20068000"
+ # CONFIG_LONG_TEST is not set
+ CONFIG_DEBUG=y
+diff -Nurp a/board/at91sam9g10ek/at91sam9g10nf_defconfig b/board/at91sam9g10ek/at91sam9g10nf_defconfig
+--- a/board/at91sam9g10ek/at91sam9g10nf_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9g10ek/at91sam9g10nf_defconfig	2012-07-25 21:25:28.975605503 +0100
+@@ -86,8 +86,8 @@ CONFIG_LOAD_UBOOT=y
+ CONFIG_IMG_ADDRESS="0x00020000"
+ CONFIG_SETTING_ADDRESS="0x01FE0000"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_GLBDRV_ADDR="0x20068000"
+ # CONFIG_LONG_TEST is not set
+ CONFIG_DEBUG=y
+diff -Nurp a/board/at91sam9g20ek/at91sam9g20dfc_defconfig b/board/at91sam9g20ek/at91sam9g20dfc_defconfig
+--- a/board/at91sam9g20ek/at91sam9g20dfc_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9g20ek/at91sam9g20dfc_defconfig	2012-07-25 20:41:48.275722343 +0100
+@@ -97,9 +97,9 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_ADDRESS="0x00004000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_APP_CHECK=y
+ # CONFIG_LONG_TEST is not set
+ CONFIG_DEBUG=y
+diff -Nurp a/board/at91sam9g20ek/at91sam9g20df_defconfig b/board/at91sam9g20ek/at91sam9g20df_defconfig
+--- a/board/at91sam9g20ek/at91sam9g20df_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9g20ek/at91sam9g20df_defconfig	2012-07-25 20:42:07.091721310 +0100
+@@ -102,11 +102,11 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
++CONFIG_IMG_ADDRESS="0x00004000"
+ CONFIG_SETTING_ADDRESS="0x00408400"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_GLBDRV_ADDR="0x20058000"
+ # CONFIG_LONG_TEST is not set
+ CONFIG_DEBUG=y
+diff -Nurp a/board/at91sam9g20ek/at91sam9g20ek_defconfig b/board/at91sam9g20ek/at91sam9g20ek_defconfig
+--- a/board/at91sam9g20ek/at91sam9g20ek_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9g20ek/at91sam9g20ek_defconfig	2012-07-25 20:41:23.179723541 +0100
+@@ -102,11 +102,11 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
++CONFIG_IMG_ADDRESS="0x00004000"
+ CONFIG_SETTING_ADDRESS="0x00408400"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_GLBDRV_ADDR="0x20058000"
+ # CONFIG_LONG_TEST is not set
+ CONFIG_DEBUG=y
+diff -Nurp a/board/at91sam9g20ek/at91sam9g20nf_defconfig b/board/at91sam9g20ek/at91sam9g20nf_defconfig
+--- a/board/at91sam9g20ek/at91sam9g20nf_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9g20ek/at91sam9g20nf_defconfig	2012-07-25 21:25:49.291603975 +0100
+@@ -87,8 +87,8 @@ CONFIG_LOAD_UBOOT=y
+ CONFIG_IMG_ADDRESS="0x00020000"
+ CONFIG_SETTING_ADDRESS="0x01FE0000"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_GLBDRV_ADDR="0x20058000"
+ # CONFIG_LONG_TEST is not set
+ CONFIG_DEBUG=y
+diff -Nurp a/board/at91sam9g45ek/at91sam9g45df_defconfig b/board/at91sam9g45ek/at91sam9g45df_defconfig
+--- a/board/at91sam9g45ek/at91sam9g45df_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9g45ek/at91sam9g45df_defconfig	2012-07-25 20:47:46.055707221 +0100
+@@ -102,10 +102,10 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
++CONFIG_IMG_ADDRESS="0x00004000"
+ CONFIG_SETTING_ADDRESS="0x00408400"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
++CONFIG_IMG_SIZE="0x00080000"
+ CONFIG_JUMP_ADDR="0x73F00000"
+ CONFIG_GLBDRV_ADDR="0x7006b000"
+ # CONFIG_LONG_TEST is not set
+diff -Nurp a/board/at91sam9g45ek/at91sam9g45ek_defconfig b/board/at91sam9g45ek/at91sam9g45ek_defconfig
+--- a/board/at91sam9g45ek/at91sam9g45ek_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9g45ek/at91sam9g45ek_defconfig	2012-07-25 20:47:02.303708341 +0100
+@@ -102,10 +102,10 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
++CONFIG_IMG_ADDRESS="0x00004000"
+ CONFIG_SETTING_ADDRESS="0x00408400"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
++CONFIG_IMG_SIZE="0x00080000"
+ CONFIG_JUMP_ADDR="0x73F00000"
+ CONFIG_GLBDRV_ADDR="0x7006b000"
+ # CONFIG_LONG_TEST is not set
+diff -Nurp a/board/at91sam9g45ek/at91sam9g45nf_defconfig b/board/at91sam9g45ek/at91sam9g45nf_defconfig
+--- a/board/at91sam9g45ek/at91sam9g45nf_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9g45ek/at91sam9g45nf_defconfig	2012-07-25 21:25:24.547605601 +0100
+@@ -86,7 +86,7 @@ CONFIG_LOAD_UBOOT=y
+ CONFIG_IMG_ADDRESS="0x00020000"
+ CONFIG_SETTING_ADDRESS="0x01FE0000"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
++CONFIG_IMG_SIZE="0x00080000"
+ CONFIG_JUMP_ADDR="0x73F00000"
+ CONFIG_GLBDRV_ADDR="0x7006b000"
+ # CONFIG_LONG_TEST is not set
+diff -Nurp a/board/at91sam9g45ekes/at91sam9g45dfes_defconfig b/board/at91sam9g45ekes/at91sam9g45dfes_defconfig
+--- a/board/at91sam9g45ekes/at91sam9g45dfes_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9g45ekes/at91sam9g45dfes_defconfig	2012-07-25 20:47:33.895706968 +0100
+@@ -102,10 +102,10 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
++CONFIG_IMG_ADDRESS="0x00004000"
+ CONFIG_SETTING_ADDRESS="0x00408400"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
++CONFIG_IMG_SIZE="0x00080000"
+ CONFIG_JUMP_ADDR="0x73F00000"
+ CONFIG_GLBDRV_ADDR="0x7006b000"
+ # CONFIG_LONG_TEST is not set
+diff -Nurp a/board/at91sam9g45ekes/at91sam9g45ekes_defconfig b/board/at91sam9g45ekes/at91sam9g45ekes_defconfig
+--- a/board/at91sam9g45ekes/at91sam9g45ekes_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9g45ekes/at91sam9g45ekes_defconfig	2012-07-25 20:46:49.043708951 +0100
+@@ -102,10 +102,10 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
++CONFIG_IMG_ADDRESS="0x00004000"
+ CONFIG_SETTING_ADDRESS="0x00408400"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
++CONFIG_IMG_SIZE="0x00080000"
+ CONFIG_JUMP_ADDR="0x73F00000"
+ CONFIG_GLBDRV_ADDR="0x7006b000"
+ # CONFIG_LONG_TEST is not set
+diff -Nurp a/board/at91sam9g45ekes/at91sam9g45nfes_defconfig b/board/at91sam9g45ekes/at91sam9g45nfes_defconfig
+--- a/board/at91sam9g45ekes/at91sam9g45nfes_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9g45ekes/at91sam9g45nfes_defconfig	2012-07-25 21:25:44.823604805 +0100
+@@ -86,7 +86,7 @@ CONFIG_LOAD_UBOOT=y
+ CONFIG_IMG_ADDRESS="0x00020000"
+ CONFIG_SETTING_ADDRESS="0x01FE0000"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
++CONFIG_IMG_SIZE="0x00080000"
+ CONFIG_JUMP_ADDR="0x73F00000"
+ CONFIG_GLBDRV_ADDR="0x7006b000"
+ # CONFIG_LONG_TEST is not set
+diff -Nurp a/board/at91sam9m10ek/at91sam9m10df_defconfig b/board/at91sam9m10ek/at91sam9m10df_defconfig
+--- a/board/at91sam9m10ek/at91sam9m10df_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9m10ek/at91sam9m10df_defconfig	2012-07-25 20:44:34.975714928 +0100
+@@ -102,10 +102,10 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
++CONFIG_IMG_ADDRESS="0x00004000"
+ CONFIG_SETTING_ADDRESS="0x00408400"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
++CONFIG_IMG_SIZE="0x00080000"
+ CONFIG_JUMP_ADDR="0x73F00000"
+ CONFIG_GLBDRV_ADDR="0x7006b000"
+ # CONFIG_LONG_TEST is not set
+diff -Nurp a/board/at91sam9m10ek/at91sam9m10ek_defconfig b/board/at91sam9m10ek/at91sam9m10ek_defconfig
+--- a/board/at91sam9m10ek/at91sam9m10ek_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9m10ek/at91sam9m10ek_defconfig	2012-07-25 20:43:34.543717453 +0100
+@@ -102,10 +102,10 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
++CONFIG_IMG_ADDRESS="0x00004000"
+ CONFIG_SETTING_ADDRESS="0x00408400"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
++CONFIG_IMG_SIZE="0x00080000"
+ CONFIG_JUMP_ADDR="0x73F00000"
+ CONFIG_GLBDRV_ADDR="0x7006b000"
+ # CONFIG_LONG_TEST is not set
+diff -Nurp a/board/at91sam9m10ek/at91sam9m10nf_defconfig b/board/at91sam9m10ek/at91sam9m10nf_defconfig
+--- a/board/at91sam9m10ek/at91sam9m10nf_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9m10ek/at91sam9m10nf_defconfig	2012-07-25 21:21:40.419615800 +0100
+@@ -86,7 +86,7 @@ CONFIG_LOAD_UBOOT=y
+ CONFIG_IMG_ADDRESS="0x00020000"
+ CONFIG_SETTING_ADDRESS="0x01FE0000"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
++CONFIG_IMG_SIZE="0x00080000"
+ CONFIG_JUMP_ADDR="0x73F00000"
+ CONFIG_GLBDRV_ADDR="0x7006b000"
+ # CONFIG_LONG_TEST is not set
+diff -Nurp a/board/at91sam9m10ekes/at91sam9m10dfes_defconfig b/board/at91sam9m10ekes/at91sam9m10dfes_defconfig
+--- a/board/at91sam9m10ekes/at91sam9m10dfes_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9m10ekes/at91sam9m10dfes_defconfig	2012-07-25 20:44:18.687715650 +0100
+@@ -102,10 +102,10 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
++CONFIG_IMG_ADDRESS="0x00004000"
+ CONFIG_SETTING_ADDRESS="0x00408400"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
++CONFIG_IMG_SIZE="0x00080000"
+ CONFIG_JUMP_ADDR="0x73F00000"
+ CONFIG_GLBDRV_ADDR="0x7006b000"
+ # CONFIG_LONG_TEST is not set
+diff -Nurp a/board/at91sam9m10ekes/at91sam9m10ekes_defconfig b/board/at91sam9m10ekes/at91sam9m10ekes_defconfig
+--- a/board/at91sam9m10ekes/at91sam9m10ekes_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9m10ekes/at91sam9m10ekes_defconfig	2012-07-25 20:43:57.255716814 +0100
+@@ -102,10 +102,10 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
++CONFIG_IMG_ADDRESS="0x00004000"
+ CONFIG_SETTING_ADDRESS="0x00408400"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
++CONFIG_IMG_SIZE="0x00080000"
+ CONFIG_JUMP_ADDR="0x73F00000"
+ CONFIG_GLBDRV_ADDR="0x7006b000"
+ # CONFIG_LONG_TEST is not set
+diff -Nurp a/board/at91sam9m10ekes/at91sam9m10nfes_defconfig b/board/at91sam9m10ekes/at91sam9m10nfes_defconfig
+--- a/board/at91sam9m10ekes/at91sam9m10nfes_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9m10ekes/at91sam9m10nfes_defconfig	2012-07-25 21:26:10.179603831 +0100
+@@ -86,7 +86,7 @@ CONFIG_LOAD_UBOOT=y
+ CONFIG_IMG_ADDRESS="0x00020000"
+ CONFIG_SETTING_ADDRESS="0x01FE0000"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
++CONFIG_IMG_SIZE="0x00080000"
+ CONFIG_JUMP_ADDR="0x73F00000"
+ CONFIG_GLBDRV_ADDR="0x7006b000"
+ # CONFIG_LONG_TEST is not set
+diff -Nurp a/board/at91sam9n12ek/at91sam9n12df_defconfig b/board/at91sam9n12ek/at91sam9n12df_defconfig
+--- a/board/at91sam9n12ek/at91sam9n12df_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9n12ek/at91sam9n12df_defconfig	2012-07-25 20:52:40.675693207 +0100
+@@ -107,7 +107,7 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
++CONFIG_IMG_ADDRESS="0x00004000"
+ CONFIG_SETTING_ADDRESS="0x00408400"
+ CONFIG_SETTING_SIZE="0x00001000"
+ CONFIG_IMG_SIZE="0x00050000"
+diff -Nurp a/board/at91sam9rlek/at91sam9rldf_defconfig b/board/at91sam9rlek/at91sam9rldf_defconfig
+--- a/board/at91sam9rlek/at91sam9rldf_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9rlek/at91sam9rldf_defconfig	2012-07-25 20:48:53.183703493 +0100
+@@ -102,11 +102,11 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
++CONFIG_IMG_ADDRESS="0x00004000"
+ CONFIG_SETTING_ADDRESS="0x00408400"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_GLBDRV_ADDR="0x2006b000"
+ # CONFIG_LONG_TEST is not set
+ CONFIG_DEBUG=y
+diff -Nurp a/board/at91sam9rlek/at91sam9rlek_defconfig b/board/at91sam9rlek/at91sam9rlek_defconfig
+--- a/board/at91sam9rlek/at91sam9rlek_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9rlek/at91sam9rlek_defconfig	2012-07-25 20:48:29.659704460 +0100
+@@ -102,11 +102,11 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
++CONFIG_IMG_ADDRESS="0x00004000"
+ CONFIG_SETTING_ADDRESS="0x00408400"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_GLBDRV_ADDR="0x2006b000"
+ # CONFIG_LONG_TEST is not set
+ CONFIG_DEBUG=y
+diff -Nurp a/board/at91sam9rlek/at91sam9rlnf_defconfig b/board/at91sam9rlek/at91sam9rlnf_defconfig
+--- a/board/at91sam9rlek/at91sam9rlnf_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9rlek/at91sam9rlnf_defconfig	2012-07-25 21:24:49.335607485 +0100
+@@ -85,8 +85,8 @@ CONFIG_LOAD_UBOOT=y
+ CONFIG_IMG_ADDRESS="0x00020000"
+ CONFIG_SETTING_ADDRESS="0x01FE0000"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_GLBDRV_ADDR="0x2006b000"
+ # CONFIG_LONG_TEST is not set
+ CONFIG_DEBUG=y
+diff -Nurp a/board/at91sam9x5ek/at91sam9x5df_defconfig b/board/at91sam9x5ek/at91sam9x5df_defconfig
+--- a/board/at91sam9x5ek/at91sam9x5df_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9x5ek/at91sam9x5df_defconfig	2012-07-25 20:52:45.375693059 +0100
+@@ -106,7 +106,7 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
++CONFIG_IMG_ADDRESS="0x00004000"
+ CONFIG_SETTING_ADDRESS="0x00408400"
+ CONFIG_SETTING_SIZE="0x00001000"
+ CONFIG_IMG_SIZE="0x00050000"
+diff -Nurp a/board/at91sam9xeek/at91sam9xedfc_defconfig b/board/at91sam9xeek/at91sam9xedfc_defconfig
+--- a/board/at91sam9xeek/at91sam9xedfc_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9xeek/at91sam9xedfc_defconfig	2012-07-25 20:50:10.643699991 +0100
+@@ -96,9 +96,9 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_ADDRESS="0x00004000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_APP_CHECK=y
+ # CONFIG_LONG_TEST is not set
+ CONFIG_DEBUG=y
+diff -Nurp a/board/at91sam9xeek/at91sam9xedf_defconfig b/board/at91sam9xeek/at91sam9xedf_defconfig
+--- a/board/at91sam9xeek/at91sam9xedf_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9xeek/at91sam9xedf_defconfig	2012-07-25 20:50:26.967699568 +0100
+@@ -103,11 +103,11 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
++CONFIG_IMG_ADDRESS="0x00004000"
+ CONFIG_SETTING_ADDRESS="0x00408400"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_GLBDRV_ADDR="0x23F00000"
+ # CONFIG_LONG_TEST is not set
+ CONFIG_DEBUG=y
+diff -Nurp a/board/at91sam9xeek/at91sam9xeek_defconfig b/board/at91sam9xeek/at91sam9xeek_defconfig
+--- a/board/at91sam9xeek/at91sam9xeek_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9xeek/at91sam9xeek_defconfig	2012-07-25 20:49:46.131699600 +0100
+@@ -103,11 +103,11 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
++CONFIG_IMG_ADDRESS="0x00004000"
+ CONFIG_SETTING_ADDRESS="0x00408400"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_GLBDRV_ADDR="0x23F00000"
+ # CONFIG_LONG_TEST is not set
+ CONFIG_DEBUG=y
+diff -Nurp a/board/at91sam9xeek/at91sam9xenf_defconfig b/board/at91sam9xeek/at91sam9xenf_defconfig
+--- a/board/at91sam9xeek/at91sam9xenf_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9xeek/at91sam9xenf_defconfig	2012-07-25 21:26:05.627603826 +0100
+@@ -88,8 +88,8 @@ CONFIG_LOAD_UBOOT=y
+ CONFIG_IMG_ADDRESS="0x00020000"
+ CONFIG_SETTING_ADDRESS="0x01FE0000"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_GLBDRV_ADDR="0x23F00000"
+ # CONFIG_LONG_TEST is not set
+ CONFIG_DEBUG=y

boot/at91bootstrap3/at91bootstrap3.mk

@@ -0,0 +1,68 @@
+################################################################################
+#
+# at91bootstrap3
+#
+################################################################################
+
+AT91BOOTSTRAP3_VERSION = 3.2
+AT91BOOTSTRAP3_SITE = \
+	ftp://www.at91.com/pub/at91bootstrap/AT91Bootstrap$(AT91BOOTSTRAP3_VERSION)
+AT91BOOTSTRAP3_SOURCE = at91bootstrap_9n12.tar.gz
+
+AT91BOOTSTRAP3_INSTALL_IMAGES = YES
+AT91BOOTSTRAP3_INSTALL_TARGET = NO
+
+AT91BOOTSTRAP3_DEFCONFIG = \
+	$(call qstrip,$(BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG))
+AT91BOOTSTRAP3_CUSTOM_CONFIG_FILE = \
+	$(call qstrip,$(BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_CONFIG_FILE))
+AT91BOOTSTRAP3_CUSTOM_PATCH_DIR = \
+	$(call qstrip,$(BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_PATCH_DIR))
+
+AT91BOOTSTRAP3_MAKE_OPT = CROSS_COMPILE=$(TARGET_CROSS) DESTDIR=$(BINARIES_DIR)
+
+ifneq ($(AT91BOOTSTRAP3_CUSTOM_PATCH_DIR),)
+define AT91BOOTSTRAP3_APPLY_CUSTOM_PATCHES
+	support/scripts/apply-patches.sh $(@D) $(AT91BOOTSTRAP3_CUSTOM_PATCH_DIR) \
+		at91bootstrap3-\*.patch
+endef
+
+AT91BOOTSTRAP3_POST_PATCH_HOOKS += AT91BOOTSTRAP3_APPLY_CUSTOM_PATCHES
+endif
+
+ifeq ($(BR2_TARGET_AT91BOOTSTRAP3_USE_DEFCONFIG),y)
+AT91BOOTSTRAP3_SOURCE_CONFIG = \
+	$(@D)/board/*/$(AT91BOOTSTRAP3_DEFCONFIG)_defconfig
+else ifeq ($(BR2_TARGET_AT91BOOTSTRAP3_USE_CUSTOM_CONFIG),y)
+AT91BOOTSTRAP3_SOURCE_CONFIG = $(AT91BOOTSTRAP3_CUSTOM_CONFIG_FILE)
+endif
+
+define AT91BOOTSTRAP3_CONFIGURE_CMDS
+	cp $(AT91BOOTSTRAP3_SOURCE_CONFIG) $(@D)/.config
+	$(SED) 's/image.bin/uImage/' $(@D)/.config
+endef
+
+define AT91BOOTSTRAP3_BUILD_CMDS
+	$(MAKE) $(AT91BOOTSTRAP3_MAKE_OPT) -C $(@D) boot
+endef
+
+define AT91BOOTSTRAP3_INSTALL_IMAGES_CMDS
+	$(MAKE) $(AT91BOOTSTRAP3_MAKE_OPT) -C $(@D) bootstrap
+endef
+
+$(eval $(generic-package))
+
+# Checks to give errors that the user can understand
+ifeq ($(filter source,$(MAKECMDGOALS)),)
+ifeq ($(BR2_TARGET_AT91BOOTSTRAP3_USE_DEFCONFIG),y)
+ifeq ($(AT91BOOTSTRAP3_DEFCONFIG),)
+$(error No at91bootstrap3 defconfig name specified, check your BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG setting)
+endif
+endif
+
+ifeq ($(BR2_TARGET_AT91BOOTSTRAP3_USE_CUSTOM_CONFIG),y)
+ifeq ($(AT91BOOTSTRAP3_CUSTOM_CONFIG_FILE),)
+$(error No at91bootstrap3 configuration file specified, check your BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_CONFIG_FILE setting)
+endif
+endif
+endif