If ext-toolchain-wrapper or any symbolic link to it was resolved by PATH,
the wrapper takes the working directory to calculate the relative paths.
Now '/proc/self/exe' is used to resolve the absolute path to the toolchain
directory if the wrapper was called neither with a relative nor an absolute
path.
[Peter: fix off-by-one, swap value == var checks around]
Signed-off-by: Patrick Ziegler <patrick.ziegler@fh-kl.de>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
I believe the original intent was to make it that the configure step
for the opengl virtual packages fails if there is not at least one
dependency. This patch fixes the logic so that it actually fails if
dependency list is empty
Signed-off-by: Will Wagner <will_wagner@carallon.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes the following compilation problem when building with 'make -s'
Unknown option "-q".
See ./configure --help for available options.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This bug caused udev to fail to load any module, crashing with Illegal
instruction.
The patch was taken from upstream and should be integrated in the next
version of kmod (version 14)
Signed-off-by: Jérémy Rosen <jeremy.rosen@openwide.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libtirpc fails to build with the Blackfin external toolchains provided
by Analog Devices, because their uClibc configuration doesn't include
AI_ADDRCONFIG. In order to prevent such build failures to happen, we
simply prevent libtirpc from being selected when such toolchains are
used. This is not a big problem, since they provide native RPC
support.
Also, since they provide native RPC, we don't have to propagate this
new dependency to the reverse dependencies of libtirpc, because they
all use native RPC when available. The exception to this rule is the
rpcbind package, which can only use the libtirpc implementation of
RPCs, and not the native one of C libraries. Therefore, the dependency
is propagated to the rpcbind package.
Fixes:
http://autobuild.buildroot.org/results/58b/58b16449065c16afce11ba120db56839efb2b1ea/build-end.log
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The at91bootstrap build sometimes fail when doing parallel builds.
Build it without parallel build.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Turned out that setting a nil-UUID is no better than clearing it.
What currently happens is as follows:
- first, genext2fs does not generate a UUID
- then we tune2fs to upgrade the filesystem
- then we run fsck, which generates a random UUID
- then we re-run tune2fs to set a nil-UUID
So, on the target, if the file system is improperly unmounted (eg.
with a power failure), on next boot, fsck may be run, and a new
random UUID will be generated.
*However*, fsck improperly updates the filesystem when it adds the
UUID, and there are a few group descriptor checksum errors.
Those errors will go undetected until the next fsck, which will then
block for user input (bad on embedded systems, bad).
Fix that by systematically generating a random UUID _before_ we call
to fsck.
A random UUID is not so bad, after all, since there are already so
many sources of unpredictability in the filesystem: files date and
ordering, files content (date, paths...) which renders a fixed UUID
unneeded.
And it is still possible to set the UUID in a post-image script if
needed, anyway.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since fe6a9e5e9d (flex: needs M4 at runtime), the autobuilders have
been producing a number of flex related build failures. They have been
hard to track down, because even on the same machine, with the same
Git commit ID and the same configuration, the failure could not be
reproduced.
However, a close inspection of flex's config.log file allowed to find
out what the problem was. In its configure script, flex uses the
host-flex to generate a minimal example, and find out the name of the
output file of flex.
When the M4 environment is passed when building the target flex, it
also affects the *execution* of the host-flex, which tries to use
/usr/bin/m4 (which doesn't exist in the autobuilder machines) instead
of the one built in $(HOST_DIR)/usr/bin/m4. So generating the minimal
example fails. And this is where what I could reproduce and what the
autobuilders script produce differ: in my case, even though host-flex
fails to run, it creates an empty lex.yy.c, which is enough to make
the configure script happy. In the context of the autobuild scripts,
this file is apparently not created at all, for an unknown reason, and
this leads to the configure script to abort.
The fix is to set ac_cv_path_M4. This will affect the default m4 used
by the target flex, but it will not affect the m4 used by the
host-flex. It allows the test made during the configure script to work
properly, and therefore should fix the issue seen in the autobuilders.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
"tune2fs -U clear" creates an invalid filesystem, that fsck.ext2
whines about later:
$ make rootfs-ext2
[--SNIP--]
$ ./host/usr/sbin/fsck.ext4 images/rootfs.ext2
e2fsck 1.42.7 (21-Jan-2013)
Filesystem did not have a UUID; generating one.
images/rootfs.ext2: clean, 4616/5120 files, 53171/131072 blocks
$ ./host/usr/sbin/fsck.ext4 -f images/rootfs.ext2
e2fsck 1.42.7 (21-Jan-2013)
One or more block group descriptor checksums are invalid. Fix<y>? yes
Group descriptor 0 checksum is 0x4131, should be 0x8bdb. FIXED.
[--SNIP--]
So we set an explicitly NULL UUID instead.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
For proper runtime execution, flex requires m4 to be
installed. Passing a M4 variable at configure time is needed,
otherwise flex on the target will try to use a 'm4' binary with a
build machine path.
Fixes bug #4988.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
ADI officially supports the buildroot and related GNU toolchain for
Blackfin since ADI's 2012R1 release only. In order to avoid confusion,
it is better to remove the 2011R1 GNU toolchain for Blackfin. In
addition, the 2011R1 GNU toolchain for Blackfin doesn't support the
BF60x processors.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When thread support is disabled, the libitm and libatomic libraries
from gcc should be disabled, otherwise, the build of gcc fails.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
For a reason that's fairly unclear to me, Peter added a '-lz' link
flag to the elf2flt.mk build in d5664ee99 ("elf2flt: fix link").
However, the zlib library may not necessarily be installed on the host
machine, so we should depend on host-zlib, and pass the appropriate
LDFLAGS. This is what this patch does.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This reverts commit d66cd067f3.
SSL certificates are no always installed in /etc/ssl/certs. For example, on
CentOS 5.6 the default OpenSSL certificates directory is /etc/pki/tls/certs,
and wget can download using https without any problem.
Moreover, the existence of /etc/ssl/certs does not guarantee the presence of a
CA certificates bundle even on Debian. On my current Debian testing
installation the openssl package itself creates an empty /etc/ssl/certs
directory.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch fixes a build failure on AArch64 (and potentially others).
Make sure sys/select.h is included before using select(2).
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Missing defines for:
aarch64, arc, blackfin, microblaze & xtensa.
Not properly supported: mips - only defines generic mips as BE, doesn't
know about mipsel (LE) thus assuming it's BE.
Fixes:
http://autobuild.buildroot.net/results/9847702b046bed59b07f0e075a58b1f31e9236ce/
This should be pretty straightforward to fix in
Foundation/include/Poco/Platform.h for interested parties since it only
cares about endianness.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The boost context library needs porting to each new architecture
and only a limited number of ports are currently available.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Source code has workaround for missing {get,make,swap}context on ARM,
so mongrel2 doesn't need glibc/uclibc snapshot when built for ARM.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Otherwise, graph-depends tries to call 'make target-purgelocales-show-depends',
which does not exist, as 'target-purgelocales' is not an actual package.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Even though xinit isn't included in the X11R7.7 release it is very
useful for debugging and quick tests.
Reinstante it without xdm requiring it though.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The graph-depends script tries to call 'make target-generic-dont-remount-rw',
which doesn't exist since 'target-generic-dont-remount-rw' is not a package.
See also the comments for commit 72bd61e5b8c2094378.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When the LZO compression mode is chosen the linux kernel requires
lzop host utility at build time.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If a package's _LICENSE_FILES contains the name of a non-existent file,
the make process would continue and return true, unless the
non-existent file is the last listed.
Fix this wrong beaviour by failing with an error when any of the listed
files is missing.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes a build failure when the build host has gpgme installed.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
curlftpfs may pick up the distribution curl-config rather than the one
in the staging area thus failing to build.
Fix it by hardcoding the curl-config path.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The mysql_client is set instead of added, thus eliminating libpthsem.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The configure script doesn't detect that the target is posix-compliant
and tries to use a custom version of segfault analysis that actually
doesn't build. Most likely, it's because the configure script doesn't
support linux-3.x. Anyway, we can just tell configure that we're
posix-compliant.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
For some reason (probably because the ARC changes modify some lex/yacc
files without updating their pre-generated variants, or because the
date/time of the pre-generated files is not correct), building the ARC
gcc requires host-flex and host-bison.
We have tested 4.2 for AVR, 4.3 and 4.4 for ARM, and none of those
need host-flex or host-bison to be installed, so only the 4.4 for ARC
seems to be affected.
Fixes the build failure visible at
http://autobuild.buildroot.org/results/673c6262e3dde8ee8dd28204d814097e6ba8f8e9/build-end.log.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since gcc doesn't use the package infrastructure, it doesn't get all
the good generic environment variables, and forgets to get
$(HOST_DIR)/usr/bin in its PATH. This prevents gcc from finding and
using host tools built by Buildroot.
This patch therefore ensures that $(HOST_MAKE_ENV) or
$(TARGET_MAKE_ENV) are passed at the appropriate locations. It will be
useful for a later patch that makes gcc depend on host-flex/host-bison
in some situations.
Original patch by Thomas Petazzoni.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The configure script gets orcc from pkg-config, which sets it to /usr/bin/orcc
instead of $(HOST_DIR)/usr/bin/orcc. So set the path explicitly instead of
relying on pkg-config.
While we're at it, also add an explicit enable/disable to configure.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
filemq uses asciidoc for its documentation. asciidoc uses python and import
the unicodedata module, which is not in host-python. So disable asciidoc
entirely.
This doesn't get hit by the autobuilders because they don't have asciidoc
installed in their chroot.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The commit e3eadd doesn't (no longer?) exists in the upstream git, so
replace it with the latest commit to date.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
czmq uses asciidoc for its documentation. asciidoc uses python and import
the unicodedata module, which is not in host-python. So disable asciidoc
entirely.
This doesn't get hit by the autobuilders because they don't have asciidoc
installed in their chroot.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Support for ocf-linux or cryptodev-linux added a dependency of host-openssl
on host-ocf-linux / host-cryptodev-linux, which we don't have and the
dependency is anyway not needed.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
classpath doesn't work with Qt in buildroot. It assumes qt will run on X11,
but we don't have qt-x11 support on buildroot.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Otherwise the comment would only show up when both conditions are true
instead of any of them.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When using lttng-tools for userland tracing with lttng-libust lttng-modules
is not required, thus a dependency on building lttng-modules and a kernel is
overkill for lttng-tools. It also hides it from a user not wanting to build
a kernel. A comment has been added to lttng-modules to show a user that
lttng-modules is dependent on a kernel build.
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The current code spawns as many jobs as up to twice the number of CPUs.
On small-class machines like laptops, with a limitted amount of memory,
but still a few CPUs (real or hyperthreads), the HDD becomes a bottleneck,
and it becomes almost impossible to do anythiong else while there is a
build in progress.
Limit the number of jobs to the number of CPUs plus one.
Even on fast machines with fast HDDs, this settings keeps the machine
fully busy (for those packages that can build in parallel, of course).
For example, building qemu or the linux kernel kept my hyperthreaded
hexa Core i7 with 18GiB of RAM, busy at 99% (I never ever managed to
get 100% even with more jobs, not even 200); while on my hyperthreaded
dual Core i5 with only 4GiB and a slow HDD, I still topped at 100% CPU,
while still able to do some work involving the HDD.
If the number of processors is not available, assume one.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Nathan Lynch <ntl@pobox.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This is a configuration that provides a basic setup for generating
bootable nandflash images:
- at91bootstrap
- barebox
- kernel
- rootfs
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
For more info, please read board/telit/evk-pro3/readme.txt
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The external toolchain logic checks (and finds) the proper ARCH_LIB_DIR
and forcibly copies it to */lib even if it's in */lib64
This is all well until the check is done for create_lib64_symlinks which
only verifies if ARCH_SYSROOT_DIR/lib64 is a symlink, which in some
toolchain it's a real directory (like sourcery x86_64 2012.09) and thus
doesn't make the symlink in the target.
Fix this by also checking for a real directory.
Easily reproducible by running "make qemu_x86_64_defconfig", switching
to an external toolchain before build, building and then trying to run
the resulting image.
Closes bug #5054
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
During the compilation of wvstreams, a number of strict aliasing
related warnings are shown, making the build quite noisy. Turn
warnings off using the --disable-warnings option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bumping this package is needed, because json-c 0.10 has a major
defect: it installs a library named libjson.so, which conflicts with
the library installed by the libjson package.
This has been changed in the upstream json-c 0.11 version, which now
installs libjson-c and json-c.pc.
It allows to solve the Pulseaudio link problem, which wants to link
against json-c but happens to link against libjson when libjson has
been compiled and installed after json-c.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
python-nfc uses libusb that requires a toolchain with threads support
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
For the following reasons:
- it used to be broken without anyone noticing for a long time,
- it is still not fully integrated within the Buildroot set of options,
- it has not gained much traction (not even I use it),
- I've always argued that sustained development should use an external
toolchain, and not rely on building one with Buildroot,
- I did not submit any of the enhancements requested during the last
developpers' day in Brussels,
- I have neither the incentive nor the time to maintain and enhance it,
it is time to deprecate the crosstool-NG backend for the 2013.05 release.
Then, it will be entirely removed early in the 2013.08 cycle, to let some
time for those that rely on it to voice their opinions. ;-)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some board configs where left out of the u-boot custom version
migration, so do it otherwise they'll just pull the latest version which
might not work and brick the device.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add custom version option as used in the linux kernel and barebox.
This way we can easily specify newer and older version.
Remove the list of the older versions because is obsoleted
by the new custom version option that is more flexible.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add Python bindings for the Apache Thrift RPC.
Thrift is an interface definition language that is used to define and create
services for numerous languages using remote procedure calls (RPC).
This patch does not include the Thrift code generator. It only includes the
Thrift libraries used at runtime.
Signed-off-by: Tiago Maluta <tiagomaluta@gmail.com>
Signed-off-by: Vinicius Tinti <viniciustinti@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Current versions of libnl (since 3.2.4, at least) do not appear to
require MAKE1.
Signed-off-by: Nathan Lynch <ntl@pobox.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Switch to distribute fork since it's maintained and fixes a few issues
while bumping to version 0.6.36.
There's work upstream in re-merging with setuptools which is now
supposedly maintained, see
http://mail.python.org/pipermail/distutils-sig/2013-March/020126.html
Buildroot python packages should use --single-version-externally-managed
and --root=/ in the install phase even if they're not setuptools-based.
This is because the default is to build egg files (zip files) for
packages to support multiple target versions, and since the packages
should be handled by buildroot infrastructure that's not needed.
Also potentially doing double-compression is time-wasting (i.e. egg
file and target filesystem) when running on slow targets.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We want --single-version-externally-managed (and --root=/) to make
python packages uncompressed (python eggs are zip files) since
compression should be a target filesystem responsibility.
And we don't need/want multiple versions of the same package in the
target since packages should be handled by buildroot on any sane
embedded system.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The base theme is no longer available in the themes download (it is the
standard theme installed by jquery-ui), so default to ui-lightness instead.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: drop CSS path option, depend on jquery-ui, misc cleanups]
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: select jquery, update for generic-package, drop _PATH options]
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Use a option name that doesn't change for every new 3.x version.
It's easier to maintain and consistent with barebox.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add custom version option as used in the linux kernel.
This way we can easily specify newer and older version.
Remove the list of the older versions because is obsoleted
by the new custom version option that is more flexible.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It's mostly sample code, normally not used, and has a bad shebang line.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit 8d929f4b ("toolchain/gcc: Only enable --with-float when it makes
sense") restricted the --with-float use to only MIPS, ARM and SPARC,
while it seems that powerpc needs it as well.
Fixes the qemu_ppc_virtex_ml507_defconfig build.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit 75b7dc68 ("linux: default to 3.9, remove 3.8") made 3.9 the
default kernel version.
The omap kernel switched to multiplatform kernel during the 3.9 kernel
development cycle. Obviously, the uImage generation doesn't work anymore
with multiplatform kernels, since you have to provide the kernel load
address, resulting in a build error.
Lock down the kernel version to 3.8 to keep the old behaviour until
someone submits a patch to switch to multiplatform kernel.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit 14f48861 ("arc: Add ARC and ARC BE architecture") introduced a
sed match against arc* buildroot architecture to translate it to arc.
This causes a problem with armv8, which is called in buildroot aarch64,
which is also matching, resulting in a build failure.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add the --executable shebang fixup option to the build phase so that the
script ends with a proper #!/usr/bin/python interpeter line set.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump to version 0.11.6
Add the --executable shebang fixup option to the build phase so that the
script ends with a proper #!/usr/bin/python interpeter line set.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Now that the openssl OCFs option is gone we need to switch to the package
option.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Unfortunately because of header file differencies this can't be used for
OCF.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Allow openssl to use cryptodev-linux hardware crypto support besides
OCF.
To do this we remove the OCF option from openssl and automatically use
any of the available implementations when available.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
cryptodev-linux is an alternative implementation to ocf-linux.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Remove the OCF linux kernel extension instead opting to build ocf-linux
modules out of tree.
This is easier for users since no kernel config tweaking is required.
On the downside the OCF drivers can't be used, but then all of the
kernel crypto drivers are available to users via cryptosoft which is
preferred.
Also remove it from the menu to utilize a virtual.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Adds the possibility to have a free-form CPU revision string and append it
to the target CPU. Only Blackfin actually uses this option.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: update for generic-package, add license info]
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Also make sure that older kernels are not selected for ARC.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
According to gcc/config.gcc, only ARM, MIPS and SPARC have the
"--with-float" option when configuring gcc.
[Peter: sort list]
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
For ARC, libgcc is always included, even when -nostdlib is given. This is
related to some small pieces of code that are not always generated by the
compiler; a call to libgcc is used in those cases instead.
During the initial stages of building the toolchain, this is a problem, as
libgcc does not exist yet. The ARC compiler supports -really-nostdlib to
override the default behavior.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
ARC needs a specific GCC for now, while we wait for ARC support to get
upstreamed.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As ARC support is not yet in all upstream packages, a different location is
required to download the packages from. This adds an option to specify a
site for ARC-specific versions of packages such as binutils, gcc.
When ARC support has been upstreamed for all packages, this option can be
removed again.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Synopsys' DesignWare ARC Processor Cores are a family of 32-bit CPUs that
can be used from deeply embedded to high performance host applications.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fix libdmalloc*.so files being deleted from the staging directory as the
package is installed into the target.
Signed-off-by: Reuben Dowle <reuben.dowle at 4rf.com>
pulseaudio documentation recommends not using the daemon mode unless you
are on a headless system, but since that is the common case for a
buildroot installation, install the related user and groups
[Peter: fix typos, ifeq check, unconditionally install into target]
Signed-off-by: Jérémy Rosen <jeremy.rosen@openwide.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This option allows users to specify the maximum level for compiled-in
debug messages with -1 being none.
In a typical scenario of nmbd+smbd+smbpasswd this can save a full
megabyte of target space.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
inotify-tools includes a shared library, which should be installed in the
staging directory
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add the jquery-keyboard package based on Simon Dawson's patch with a
newer version and improvements (license, select jquery, install
layouts).
[Peter: don't use install -D when destination is a directory]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since there is no need to edit the generated list, we don't need
to keep the files under git control, so remove the existing lists.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The generated lists are automatically updated when building the manual.
[Peter: fix typos]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
[yann.morin.1998@free.fr: indentation, remove temp dir, intro to host utils]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
[yann.morin.1998@free.fr: one more stuff->feature fixup]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Script generating the target and host package tables, and the deprecated
stuff list as well. These tables and lists are generated parsing the
Config.in files.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
[yann.morin.1998@free.fr: no leading dot, no menu path for host-utils]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
[yann.morin.1998@free.fr: rename readme so it is obvious it's about kconfiglib]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Initially, a "cp" was used for the one-time target skeleton
installation, and an "rsync" was used for the every-time overlay
skeleton installations. Then, the target skeleton install was
changed to also use rsync (1cd3f992fb).
Now there are two rsyncs, but with different filter specs, which
seems odd.
This patch adds --excludes to both invocations of rsync to make them
consistent, and removes the -u option from the initial target skeleton
installation.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The default name of the kernel binary for the RaspberryPi is kernel.img,
it's only a zImage kernel renamed. Since Buildroot will build a zImage, the
default config should use the zImage name instead of forcing the user to
rename a file.
This patch also remove the cmdline argument rootfstype. There is no point
forcing the user to use ext4 for its root partition.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
DirectFB comes with incorrect declarations for *SetRegion* datatypes,
this breaks the build for some GFX Drivers. Also there are some headers
missend in the archive, this breaks some other modules of directfb that
not covered yet by the autobuilders.
And at least the configure script doesn't use a variable for the
imlib2-config script. That breaks crossbuilds of directfb in most cases.
Fixes:
http://autobuild.buildroot.net/results/03465f0e14accc8d8f8fc2640b7a0dd8bec594e4
Signed-off-by: Carsten Schoenert <c.schoenert@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: drop noauth patch, cleanup Config.in, don't install to staging, ..]
Signed-off-by: Charles Manning <cdhmanning@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Makes the code uniform with the post-build and post-image implementation
(which is slightly simpler and, presumably, more efficient).
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
xkeyboard-connfig was selectable only if X.org was enabled. However,
weston, the reference implementation of the Wayland protocol, also
needs xkeyboard-config, so we have to make this package available
outside of the if BR2_PACKAGE_XORG7 ... endif conditional.
In addition to this, the xkeyboard-config currently pulls in
xapp_xkbcomp as a runtime dependency, but this dependency is only
needed with X.org. And it also pulls in xlib_libX11 and xproto_proto
as build-time dependencies. But in fact those ones are runtime
dependencies, and they are only needed under X.org. This helps
reducing the number of dependencies of xkeyboard-config in a
weston/wayland configuration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The old BR2_PACKAGE_PTHREAD_STUBS option (kept for legacy support) now
selects the BR2_PACKAGE_XLIB_LIBPTHREAD_STUBS option, but this creates
a consistency warning from kconfig, because the new option has
BR2_PACKAGE_XORG7 as a dependency.
Since the old option also had BR2_PACKAGE_XORG7 has a dependency, we
make the legacy config option depend on BR2_PACKAGE_XORG7 to avoid
this warning.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The uClibc test suite can be installed on the target thanks to the
BR2_UCLIBC_INSTALL_TEST_SUITE option, but it requires make to be
installed on the target. Since the make package is currently marked as
deprecated, it leads to the following warning:
warning: (BR2_UCLIBC_INSTALL_TEST_SUITE) selects BR2_PACKAGE_MAKE which has unmet direct dependencies (BR2_DEPRECATED)
We fix this by undeprecating the make package, and also update its
description to explain why we have the make package even if we don't
have support for building a toolchain for the target.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The mysql_client package is only available on architectures having a
MMU, so all packages that are selecting mysql_client should depend on
BR2_USE_MMU.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The configure script nicely supports a preconfigured directfb-config
(using ac_cv_path_DIRECTFBCONFIG), except for when it checks the directfb
version where it simply uses whatever directfb-config is in the path,
breaking the build when this isn't available / recent enough.
Fix is to use the correct one instead. As SDL doesn't autoreconf cleanly,
also patch the generated configure script.
Finally move the ac_cv_path_DIRECTFBCONFIG setting under the directfb
conditional as it is only needed there.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
After switching directfb to 1.6.3 sawman must also be bumped to the
current version because the old version can't be builded with newer
libs and headers from directfb.
Signed-off-by: Carsten Schoenert <c.schoenert@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The previous version 1.2.0 isn't acting well with directfb 1.6.3 so
increasing the version to the latest available version on directfb.org.
Signed-off-by: Carsten Schoenert <c.schoenert@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Related to the changed directfb variables for
BR2_PACKAGE_DIRECTFB_DITHER_RGB16 and
BR2_PACKAGE_DIRECTFB_TESTS
adding a legacy check.
[Peter: fix DIRECTB_TESTS typo]
Signed-off-by: Carsten Schoenert <c.schoenert@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Adding a helper string for the PXA3xx and graphics driver from Marvell
and the EP9x graphics driver from Cirrus Logic.
Signed-off-by: Carsten Schoenert <c.schoenert@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
To be identical to the version of directfb switching also to version
1.6.3. The divine package needs at minimum directfb 1.6.0 as
dependencie.
Adding the license information to the package divine.
Also switch to Git for getting the package source because the tar.gz
for version 1.6.3 on directfb.org is broken because of a missed header
file inside.
[Peter: tweak comments]
Signed-off-by: Carsten Schoenert <c.schoenert@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump to version 1.12.4 and add a security patch for CVE-2013-1940.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: move directly under neardal option so it gets indented]
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Packages that install daemons may need those daemons to run as a non-root,
or an otherwise non-system (eg. 'daemon'), user.
Add infrastructure for packages to create users, by declaring the FOO_USERS
variable that contain a makedev-syntax-like description of the user(s) to
add.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Cam Hutchison <camh@xdna.net>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
the integrator926 defconfig has not been updated for quite some time,
and is still asking for very old linux and u-boot releases. Now that
these versions aren't present in Buildroot anymore, they default to a
newer release, where, in the u-boot case, the defconfig name has
changed, leading to a build failure.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
sftp expects to find sftp-server in the standard (/usr/libexec) location,
so ensure it gets installed there.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Factorize all the "depends on" into "if...endif" blocks
All the UBIFS options use "depends on BR2_TARGET_ROOTFS_UBIFS" but
we can simplify the config file by enclosing them in an "if..endif"
block.
Signed-off-by: Mark Jackson <mpfj@newflow.co.uk>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add support for LZO and XZ compression methods to cpio, ext2, tar and
ubifs filesystem targets.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libxml++ is a C++ wrapper for libxml2.
[Peter: misc Config.in fixes]
Signed-off-by: Nicolas Ménégale <nicolas.menegale@openwide.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Poppler is a PDF rendering library based on the xpdf-3.0 code base.
[Peter: Fix license, comment text and drop explicit library options]
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Also work around a build failure for ARM thumb mode which was also
present in the previous versions.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Update the mdev patch so that subsystem matching is reintroduced.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Note that the Python binding is disabled; we can't build this in Buildroot
without the sipconfig Python module for the host.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
On commit 5538e47662 the versioned package
patches changed the directory structure but the packages weren't fixed.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
On commit 5538e47662 the versioned package
patches changed the directory structure but the packages weren't fixed.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
On commit 5538e47662 the versioned package
patches changed the directory structure but the packages weren't fixed.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It's now been a while since it has been possible to build the kconfig
parser to understand a prefix other than CONFIG_, and even no prefix
at all, by setting the CONFIG_ macro (#define) at biuld time.
Just use that, insted of patching, it will make it easier for us in the
future.
Our patches have been refreshed at the same time.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit a0b6faa ("gdb: convert to the package infrastructure") changed
the name of the host gdb configuration option, and added it to the
legacy option set, leading to a build breakage for the
armadeus_apf9328_defconfig.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The IRQ mapping failures have been fixed in 3.8.8 so update it to the
latest kernel series.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since openssl's path is '/etc/ssl/' (specified in our openssl package),
we should also make sure that's what curl is using.
Previously, it's hasn't been specified, which means it changes depending
on the host system where it's compiled.
Signed-off-by: Shawn J. Goff <shawn7400@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add the swig package, host-variant only since toolchain on the target is
deprecated and this package wouldn't serve any purpose.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Useful for the upcoming host-python-m2crypto package.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Don't change the busybox STATIC option if buildroots PREFER_STATIC_LIB option
is not set. Not to prefer static linking doesn't imply prefer dynamic linking
for all packages.
Signed-off-by: Patrick Ziegler <patrick.ziegler@fh-kl.de>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump to version 9.1 which includes mitigations against BEAST and the RC4
vuln.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Enable agentx support by default, it's required for newer versions of
quagga.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Each qt5 package was defining its own QT5<something>_SITE
variable. Unfortunately, the download location has slightly changed
for Qt 5.0.2, so we would have to change it for all packages. Instead,
we factor the <pkg>_SITE variable as QT5_SITE in package/qt5/qt5.mk,
just like we already do for QT5_VERSION.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When a FOO_SITE variable ends in a slash and gets joined with a
FOO_SOURCE variable like $(FOO_SITE)/$(FOO_SOURCE), the resulting URI
has a double slash. While double-slashes are fine in unix paths, they
are reserved in URIs - the part following '//' must be an authority.
Signed-off-by: Shawn J. Goff <shawn7400@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The Ne10 project has been set up to provide a set of common, useful
functions which have been heavily optimized for the ARM Architecture
and provide consistent well tested behavior that can be easily
incorporated into applications. C interfaces to the functions are
provided for both assembler and NEON implementations.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The LCRYPT variable is no longer used; use SULOGINLIBS instead.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
and re-enable boost context library since its compilation with
uClibc is fixed. Disable new atomic library because it can not
compile with uClibc (fixed in upstream version).
Signed-off-by: Victor Hiairrassary <victor.hiairrassary.ml@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Until now, the gdb site for AVR32 was adjusted only when GDB_VERSION
was not set, i.e only when the cross-gdb is *not* built. We should in
fact also set the site when the cross-gdb is built, so when
GDB_VERSION is defined through package/gdb/Config.in.host.
So, instead, we now have something like:
ifeq ($(GDB_VERSION),)
# we define here a default version that is used when the cross-gdb is
# not built and only the target gdb is selected.
endif
ifeq ($(GDB_VERSION),something-special)
GDB_SITE = some-special-site-for-some-special-gdb-version
endif
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit 79828fc01d (toolchain-external:
update ARM Linaro toolchains) accidently broke the URL for the Linaro
2013.01 toolchain by replacing a .bz2 extension by .bz. This patch
fixes this problem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
A quick test with a ~3.5MB ext4 filesystem shows that 1081 blocks isn't
enough:
tune2fs 1.42.7 (21-Jan-2013)
Please run e2fsck on the filesystem.
Creating journal inode:
Journal size too big for filesystem.
So bump it a bit. Overestimating the journal size is probably not really
a big deal for the kind of systems using ext3/4 anyway.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some bootloaders have a buggy ext2 support, and require ext2 rev1
instead of the traditional ext2 rev0 that genext2fs produces.
tune2fs accepts only one '-O list' at a time, so we need to construct
a list of -O options.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Use the host-e2fsprogs to tune2fs the generated rootfs.ext2 image,
and upgrade it to either one of ext2, ext3 or ext4.
Since calling tune2fs may require running e2fsck (tune2fs will warn
to do so when certain FS options are changed), we systematically call
e2fsck. This makes the code path simpler, and as a side-effect checks
that genext2fs did not generate garbage.
In turn, e2fsck will unconditionally add a UUID to the filesystem,
which is bad for reproducibility, so we call tune2fs again to remove
the UUID. This does not require checking the filesystem.
To ensure compatibility of Buildroot's .config, leave ext2 as the
default. Boards' .config can override this at will.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Also change upstream website and download URL and add new Canvas option.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit c461e64201 bumped the linux 3.8.x
stable version from 3.8.5 to 3.8.6, but did so in only one of the two places
in which the version number is hard-coded in linux/Config.in
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The x86/x86-64 CodeSourcery toolchains use some weird locations for
the gdbserver binary:
$ find . -name 'gdbserver'
./i686-pc-linux-gnu/libc/atom/usr/bin/gdbserver
./i686-pc-linux-gnu/libc/atom/usr/lib/bin/gdbserver
./i686-pc-linux-gnu/libc/core2/usr/bin/gdbserver
./i686-pc-linux-gnu/libc/core2/usr/lib64/bin/gdbserver
./i686-pc-linux-gnu/libc/usr/lib/bin/gdbserver
./i686-pc-linux-gnu/libc/usr/lib64/bin/gdbserver
Notice that it's sometimes hidden in a usr/{lib,lib64}/bin
directory. This patch changes the gdbserver logic to also try in this
location.
Originally based on work done by Daniel Nilsson, visible at
http://patchwork.ozlabs.org/patch/155767/.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In order for a Buildroot toolchain to be usable as an external
toolchain, we should copy the target gdbserver somewhere into
$(HOST_DIR). In order to match what Crosstool-NG does (and therefore
to match something the external toolchain logic already understands),
we install gdbserver in
$(HOST_DIR)/usr/<tuple>/debug-root/usr/bin/gdbserver.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When an external toolchain is used, and the user has chosen to copy
the external toolchain gdbserver to the target, then we should allow
the user to build a gdbserver and/or a cross-gdb: the ones of the
external toolchain should be used.
The reasoning is that one must use a gdbserver and cross-gdb of
identical versions to be sure that debugging will work properly.
Change suggested by Yann E. Morin.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit converts gdb to the package infrastructure, and therefore
moves it from toolchain/gdb to package/gdb.
The target package is now visible in "Package selection for the
target" => "Debugging, profiling and benchmark". The main option,
"gdb", forcefully selects the "gdbserver" sub-option by
default. Another sub-option, "full debugger" allows to install the
complete gdb on the target. When this option is enabled, then
"gdbserver" is no longer forcefully selected. This ensures that at
least gdbserver or the full debugger gets built/installed, so that the
package is not a no-op.
The host debugger is still enabled through a configuration option in
"Toolchain". It is now visible regardless of the toolchain type (it
used to be hidden for External Toolchains). The configuration options
relative to the host debugger are now in package/gdb/Config.in.host,
similar to how we have package/binutils/Config.in.host.
Since gdb is now a proper package, it is no longer allowed to 'select
BR2_PTHREADS_DEBUG' to ensure thread debugging is available when
needed. Instead, it now 'depends on
BR2_TOOLCHAIN_HAS_THREADS_DEBUG'. This option, in turn, is selected by
the different toolchain backends when appropriate. The
'BR2_TOOLCHAIN_HAS_THREADS_DEBUG_IF_NEEDED' option is removed, since
we no longer need to know when it is allowed to 'select
BR2_PTHREADS_DEBUG'. Also, the 'BR2_PTHREADS_DEBUG' option is moved to
appear right below the thread implementation selection (in the case of
the Buildroot toolchain backend).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In order for qmake to generate correct moc command lines, we need to
make sure INCLUDEPATH contains $(STAGING_DIR)/usr/include. To do so,
we add a new line in our custom qmake.conf.
Also, in order to clearly identify the Buildroot specific variables
from the qmake standard variables, we prefix all the custom Buildroot
variables by BUILDROOT_ in qmake.conf.
This solves compilation issues of qt5svg such as "Undefined
interface", due to the fact that moc isn't passed a -I path pointing
to the main header directory.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes a local build failure when testing other things.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of explicitly listing the sub-architectures or architectures
that are big-endian, use BR2_ENDIAN directly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Builtin-video from NSC/AMD Geode x86 processors.
Fixes build failures on other architectures.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As noticed by Arnout, Qt4 and Qt5 cannot be installed together,
because for example the qt.conf installed by one version cannot be
understood by the qmake of another version. We therefore make them
mutually exclusive, which sounds reasonable for the embedded systems
targeted by Buildroot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Somehow the old setting wasn't dropped in 184850a42 (bump u-boot /
linux versions to current stable).
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
olddefconfig is a new target available in kconfig that allows to take
an old .config file, and update it to the latest version of the code,
without being asked for questions: it automatically assumes the
default value for options whose value was not defined.
It for example allows to take a minimal defconfig, copy it as .config,
and do 'make olddefconfig' to get the full .config.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Our kconfig code is updated to the version of kernel 3.9-rc2. No major
issues during the migration, except:
* Some conflicts when applying 03-change-config-option-prefix.patch
due to upstream kernel changes.
* The need of adding a new patch, 15-fix-qconf-moc-rule.patch, to fix
the make rule that generates the moc file for the Qt-based
interface.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We no longer support ARM less than v3 so kill dead code.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We no longer support ARM less than v4 so drop the generic asm option.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We no longer support ARM less than v4 so just kill dead code that we had
for those cases.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Add Faraday FA526/626 as suggested on bug #1291
Note however that these cores are v4 and NOT v4t.
* Make the sa110 & sa1110 cores -> strongarm since they're the same.
* Drop all of the ARM variants lower than v4 including generic, there's
no point in supporting obsolete targets.
* Fix uClibc USE_BX logic, it was always on, this would break the new
FA526/626 support and broke StrongARM since it's a v4 core.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
git.xilinx.com is no longer available (moved to github), and github
doesn't allow downloading the tarball blobs directly, so use a local
mirror on sources.buildroot.net instead.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
To match the logic we have for BR2_LINUX_KERNEL_PATCH. The user has
already specified a custom patch directory, so we don't need to be
so specific about the what file names we accept, and it becomes quite
cumbersome when a custom git version is used.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The 3.7.x series is EOLed upstream so match that marking it as
deprecated.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As reported in bug #6164 when using busybox iproute2 openvpn can fail to
locate the 'ip' utility.
This was correct until busybox 1.21.0 was released since it changed the
location of /bin/ip to /sbin/ip (what iproute2 proper does).
So adjust the ip path accordingly.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Passing --with-file-converter=enscript isn't enough since the build
system will try the fallback options (a2ps, mpage, texttops) if it's not
found.
This has two bad effects: one of the tools leaking from the distribution
making foomatic-filters think everything will be the same on the target
(and failing when that's not the case), and failed builds when none is
found (enscript is installed in the target directory, the build system
doesn't look there).
So just avoid the test by stating explicitly where enscript will live in
the target. Fixes:
http://autobuild.buildroot.net/results/37ad3d2c5c35f00c644a2c572f1429bafa4b7cf4/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
linknx has support for SMTP via libesmtp, however there's no clean way
to specify where libesmtp-config lives.
So when libesmtp is built it finds it via the headers and is
automatically enabled, but it fails to get the appropiate link line from
libesmtp-config because it's not found.
Fix it by forcibly disabling it. If someone is interested in working
with upstream about this an option like --with-libcurl should be
implemented in configure.
Solves:
http://autobuild.buildroot.net/results/90ebb383d7a2d7bdf09ffac65e2504da7b6d19f5/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The need can be patched out by disabling the tests, however the only
package that uses libpthsem (bcusdk) needs a fork-enabled libpthsem so
there's not much point. Fixes:
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes a build failure i've found while debugging another one :)
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Now that zeromq has been bumped to version 3.2.2, we need to provide the
C++ binding using a separate package. The zmqpp package provides a
high-level C++ wrapper library around the zeromq C API.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Now that zeromq has been bumped to version 3.2.2, we need to provide the
C++ binding using a separate package. The cppzmq package provides a simple
single-header C++ binding.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
[yann.morin.1998@free.fr: add comment about no license file]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Simon Dawson <spdawson@gmail.com>
[yann.morin.1998@free.fr: create dir as post-patch, not pre-configure]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
[yann.morin.1998@free.fr: space-damage]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Gutenprint, formerly named Gimp-Print, is a suite of printer
drivers that may be used with most common UNIX print spooling
systems, including CUPS, lpr, LPRng, or others
[Peter: needs host-pkgconf]
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
[yann.morin.1998@free.fr: needs libiconv, cleanup]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Foomatic is a database-driven system for integrating free software
printer drivers with common spoolers under Unix. It supports CUPS,
LPRng, LPD, GNUlpr, Solaris LP, PPR, PDQ, CPS, and direct printing
with every free software printer driver known to us and every
printer known to work with these drivers.
[Peter: minor whitespace fixes]
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
[yann.morin.1998@free.fr: space-damage, licensing terms, unneeded vars]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
GNU Enscript is a free replacement for Adobe's enscript program.
GNU Enscript converts ASCII files to PostScript, HTML, or RTF and
stores generated output to a file or sends it directly to the
printer. It includes features for `pretty-printing' (language-
sensitive code highlighting) in several programming languages.
[Peter: fix Config.in indentation]
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
[yann.morin.1998@free.fr: space-damage, unneeded variables, licensing terms]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This is a default configuration for the RaspberryPi, tested and functional.
The kernel used is the one developped by the RaspberryPi foundation as
it's not fully supported currently in mainline kernel. The configuration
used for the kernel is the default bcmrpi.
For more info, please find board/raspberrypi/readme.txt
[Peter: minor README tweaks, rename to readme.txt]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
[yann.morin.1998@free.fr: use correct kernel headers, update kernel cset]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We already use the .root stamp file to remember if we have copied the
skeleton, so we can remove the /bin check.
Likewise, we should always have a TARGET_SKELETON (or explicitly error
out otherwise), so remove that check as well.
Finally, now that we're using rsync to do the copy, we might as well
use its exclude support instead of cleaning up unwanted files afterwards.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
An example is .init_enable_core, to enable coredumps in busybox
Signed-off-by: Tilman Keskinöz <arved@arved.at>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Vala generates C code from Vala code, and therefore requires a
compiler. Since we are deprecating the native compiler support on the
target, having vala on the target doesn't make sense.
Of course, we keep vala for the host, where compilation happens.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The redis-001-uclibc.patch was properly adding conditionals to ensure
HAVE_BACKTRACE is not defined when uClibc is used. However, __unix
doesn't seem to be define with the toolchain Peter uses on gcc14, so
the <features.h> doesn't get included, therefore __UCLIBC isn't
defined, and the code believes that backtrace support is available. We
fix this by including <features.h> when __linux__ is defined.
Fixes:
http://autobuild.buildroot.org/results/4ba818f877af145a547a1fede0bb738192c2f181/build-end.log.
Also add another patch that do not redefine the _LARGEFILE_SOURCE and
_FILE_OFFSET_BITS macros if they are already defined on the command
line. It avoids the ugly warnings that we could see from the build
logs, and therefore make it easier to spot real errors.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
With 4.8.x released, it makes sense to update our default gcc version
before 4.6.x becomes unmaintained.
At the same time simplify the kconfig logic a bit.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
openswan needs host-bison. The dependency was already there, but the
build was not executed with $(TARGET_MAKE_ENV) in the environment, and
therefore $(HOST_DIR)/usr/bin was not in the PATH.
While we're at it, add licensing informations to openswan.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Make the MIB modules, which are included/excluded in the build, to be
configurable instead of being hard coded.
[Peter: drop menuconfig]
Signed-off-by: przemyslaw <przemyslaw.wrzos@calyptech.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The makeinfo program from texinfo is needed to get Crosstool-NG to
build properly a toolchain. Long term, it would be great if
Crosstool-NG supported building without texinfo, simply by disabling
the build of documentation.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some ltmain.sh files enclose the version number in quotes. This is
already handled corretly by pkg-autotools.mk in LIBTOOL_PATCH_HOOK.
This patch adds the same fix for AUTORECONF_HOOK.
Signed-off-by: przemyslaw <przemyslaw.wrzos@calyptech.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
... while keeping compatibility with older ones.
Preventive fix to autobuild failures! ;-)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit provides configuration options to automatically generate a
binary environment image for U-Boot.
Two options are available (and mandatory):
* the location of a text file describing U-Boot environment.
* the size of the environment.
[Peter: fix Config.in indentation + typo]
Signed-off-by: Arnaud Rébillout <rebillout@syscom.ch>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The tool mkenvimage generates a valid binary environment image from
a text file describing the key=value pairs of the environment.
This commit allows installation on target and host.
Signed-off-by: Arnaud Rébillout <rebillout@syscom.ch>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit:
* Adds licensing informations.
* Uses the apr-1-config script instead of pointing apr-util to the
apr build directory.
* Ensures apu-1-config gets fixed properly using the
<pkg>_CONFIG_SCRIPTS mechanism.
* Ensures that libiconv gets built before apr-util if available, so
that character set conversion features of apr-util can be enabled.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit:
* Adds licensing informations
* Ensures the apr-1-config script gets fixed appropriately
* Remove the usr/build-1/ directory from the target, since it is only
used during the compilation of packages that rely on APR.
* Fix up a few paths in usr/build-1/ so that the compilation of
apr-util works properly on top of this apr package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch superseds http://patchwork.ozlabs.org/patch/150161/, but
does it in a different way. Since we don't have a way of selecting the
thread implementation for external toolchains, and it sounds a bit too
heavy to add new config options just for the sake of rt-tests, we
instead simply add some help text to the rt-tests package explaining
that NPTL thread implementation is needed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since the Qt5 version will be the same for all Qt5 modules, factor it
in qt5/qt5.mk as QT5_VERSION.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The ncurses build can become polluted by the user's TERMINFO
environment variable, causing the user's ~/.terminfo to be modified
and preventing the install from succeeding:
/bin/sh ./run_tic.sh
** Building terminfo database, please wait...
Running tic to install /home/nathanl/devel/buildroot.git/output/host/usr/i686-unknown-linux-gnu/sysroot/usr/share/emacs/24.0.97/etc/ ...
You may see messages regarding extended capabilities, e.g., AX.
These are extended terminal capabilities which are compiled
using
tic -x
If you have ncurses 4.2 applications, you should read the INSTALL
document, and install the terminfo without the -x option.
1562 entries written to /home/nathanl/.terminfo
** built new /home/nathanl/devel/buildroot.git/output/host/usr/i686-unknown-linux-gnu/sysroot/usr/share/emacs/24.0.97/etc/
installing std
installing stdcrt
installing vt100
installing vt300
make[2]: Leaving directory `/home/nathanl/devel/buildroot.git/output/build/ncurses-5.7/misc'
make[1]: Leaving directory `/home/nathanl/devel/buildroot.git/output/build/ncurses-5.7'
for i in $(find /home/nathanl/devel/buildroot.git/output/host/usr/i686-unknown-linux-gnu/sysroot/usr/lib* -name "*.la"); do cp -f $i $i~; /usr/bin/sed -i -e "s:\(['= ]\)/usr:\\1/home/nathanl/devel/buildroot.git/output/host/usr/i686-unknown-linux-gnu/sysroot/usr:g" $i; done
>>> ncurses 5.7 Installing to target
mkdir -p /home/nathanl/devel/buildroot.git/output/target/usr/lib
cp -dpf /home/nathanl/devel/buildroot.git/output/build/ncurses-5.7/lib/libncurses.so* /home/nathanl/devel/buildroot.git/output/target/usr/lib/
ln -snf /usr/share/terminfo /home/nathanl/devel/buildroot.git/output/target/usr/lib/terminfo
mkdir -p /home/nathanl/devel/buildroot.git/output/target/usr/share/terminfo/x
cp -dpf /home/nathanl/devel/buildroot.git/output/host/usr/i686-unknown-linux-gnu/sysroot/usr/share/terminfo/x/xterm /home/nathanl/devel/buildroot.git/output/target/usr/share/terminfo/x
cp: cannot stat `/home/nathanl/devel/buildroot.git/output/host/usr/i686-unknown-linux-gnu/sysroot/usr/share/terminfo/x/xterm': No such file or directory
make: *** [/home/nathanl/devel/buildroot.git/output/build/ncurses-5.7/.stamp_target_installed] Error 1
So unexport TERMINFO in the top-level Makefile.
Signed-off-by: Nathan Lynch <ntl@pobox.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Switch ECHOs to SEDs to avoid issues with defines changing after
sysoptions.h was included - and it's cleaner.
Enable hmac-sha2-256 and hmac-sha2-512 support for the full featured.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some packages are hosted on https:// servers, and wget only works on
these if the SSL certificates are installed. For example, downloading
the kernel sources from kernel.org requires those SSL certificates to
be installed.
[Peter: fix typo]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The host-autoconf build process requires a full Perl installation, or
at least a Perl installation that has the Data::Dumper module
installed. On a basic Debian system, only 'perl-base' is installed,
but Data::Dumper is in the 'perl' package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The current dependencies code abort as soon as one program is
missing. It is quite annoying when multiple programs are
missing. Instead, bail out if needed after testing all programs.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
awk, bison, flex, makeinfo, gettext should be built as dependencies of
packages when needed. In practice, even the toolchain build doesn't
need any of these, and only a few packages do require them.
It is not needed to list gzip and bzip2 since they are already checked
through ${DL_TOOLS}: whenever a package needs gzip or bzip2 for its
extraction, the dependency is added.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libglib2 requires msgfmt, which is now provided by host-gettext since
gettext will no longer be part of the mandatory dependencies.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In preparation for the removal of gettext as a hard dependency, we
need to be able to provide a host variant of gettext for the few
packages that require msgfmt.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
On the host, we generally build and install a shared library rather
than a static version of libraries. In this specific case, we will
want to build host-gettext, which builds a shared library that depends
on ncurses. And this doesn't work well if ncurses is static because it
hasn't been built with -fPIC. Therefore, let's build ncurses as shared
on the host.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
iproute2 requires bison, so we add the necessary dependency. In
addition, in order for iproute2 to find bison, we need to pass
$(TARGET_MAKE_ENV).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In preparation for the removal of the flex/bison mandatory
dependencies, make sure libpcap builds host-flex/host-bison.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
On a system where m4 is not installed, gmp does not build due to the
lack of m4. Add the missing host-m4 dependency.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add a missing $(Q) in front of a MESSAGE call, which leads to the
message being displayed but also the command that shows the message.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add a missing $(Q) in front of a MESSAGE call, which leads to the
message being displayed but also the command that shows the message.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add a missing $(Q) in front of a MESSAGE call, which leads to the
message being displayed but also the command that shows the message.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
For each version of gcc, we need to check whether it requires mpc as a
dependency. Since this is true for 4.5, 4.6, 4.7, snapshots and now
4.8, let's factorize this code a bit by using a Kconfig symbol that
tells us whether we are using a gcc version that requires mpc.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit adds support for the recently released gcc 4.8. We re-add
the same patch series as the one used for 4.7.x, after refreshing the
patches.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The gcc snapshots are now located at
ftp://gcc.gnu.org/pub/gcc/snapshots/. This has been tested with a
recent 4.8.0-RC snapshot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The libgtk2 package was using a host-<foo>.patch that should be
applied only on the host variant of the package. Unfortunately, with
the patch model rework, this doesn't work anymore: Buildroot tries to
apply the patch twice, for some reason.
But instead of fixing the patch model, it is probably a lot better to
fix this patch itself, which is the only usage of host-only patch in
Buildroot.
So instead of simply removing code that detects dependencies in gtk2's
configure.in script, we use a condition based on the value of
gdktarget. And it turns out that it makes the patch shorter.
However, it requires autoreconfiguring the libgtk2 target package,
because we are now modifying its configure.in.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The oprofile build was broken on powerpc since version 0.9.8.
This was detected in several autobuilds, like
http://autobuild.buildroot.net/results/6f6c02d18495907d50fcdfc6003ac20d493c55fe/
Thomas Petazzoni had some fixes pending in his own tree, and this patch is
partially based on this work (credits to him). Here is an overview:
- I took over (and fixed) the oprofile.mk changes, except for the powerpc-
specific part. For powerpc, there is a new dependency to libpfm4.
- I reimported those Yocto patches that were specific to the ppc build
issues, but left out the other ones. Those can be added in separate
commits.
[Peter: simplify libpfm4 check]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
At the Buildroot Developers Meeting (4-5 February 2013, in Brussels) a change
to the patch logic was discussed. See
http://elinux.org/Buildroot:DeveloperDaysFOSDEM2013
for details. In summary:
* For patches stored in the package directory, if
package/<pkg>/<version>/ does exist, apply package/<pkg>/<version>/*.patch,
otherwise, apply package/<pkg>/*.patch
* For patches stored in the global patches directory, if
$(GLOBAL_PATCH_DIR)/<pkg>/<version>/ does exist, apply
$(GLOBAL_PATCH_DIR)/<pkg>/<version>/*.patch, otherwise, apply
$(GLOBAL_PATCH_DIR)/<pkg>/*.patch
This patch adds the new BR2_GLOBAL_PATCH_DIR configuration item, and reworks
the generic package infrastructure to implement the new patch logic.
[Peter: fixup doc nits as pointed out by Thomas]
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When the rpi-userland package is selected, assume we are targetting
the Raspberry Pi, and add the right platform glue code when building
the Qt5 EGLFS plugin.
Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Version 2.0.4 has improved support for handling of device-tree
blobs on the ARM platform.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
They're not development tools, they're libraries, so place them under
libraries->other.
Also adjust gsl sort order.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libcap can optionally link to libattr to support extra
file capabilities. Link to this library and pull it as
dependency if BR2_PACKAGE_ATTR is selected.
[Peter: use LIBCAP_ prefix on variable]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
HPLIP (Hewlett-Packard Linux Imaging & Printing) is an HP-developed solution
for printing, scanning, and faxing with HP inkjet and laser based printers
in Linux.
[Peter: fix Config.in white space]
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Previously, the crosstool-NG backend did depend on the top-level
Buildroot's .config to detect changes in the toolchain options,
using a tentatively-clever heuristic, which also included the full
Buildroot's version string to push down to set the components' versions
strings.
In doing so, any commit in the Buildroot tree would imply a complete
rebuild of the toolchain, even in the case the toolchain options did
not change, thus being a large annoyance (to say the least).
As Buildroot never guaranteed that toolchain options would be detected,
even less handled, and that the internal backend does neither detect nor
act on toolchain options changes, and delegate that to the user, there
is no point in individualising the crosstool-NG backend's behaviour.
This reasoning also applies to the depdency on the crosstool-NG's bundled
.config file, too.
So, just drop the not-so-clever heuristic, and just build the toolchain
once, leaving to the user the responsibility to explictly ask Buildroot
to rebuild the toolchain.
Reported-by: "Przemyslaw Wrzos" <przemyslaw.wrzos@calyptech.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: "Przemyslaw Wrzos" <przemyslaw.wrzos@calyptech.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This fixes the following errors when building util-linux v2.22.2 for
the host in case the PAM headers are missing:
configure: error: login selected, but required PAM header file not available
configure: error: su selected, but required PAM header file not available
Signed-off-by: Christophe Vu-Brugier <cvubrugier@lacie.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If you do a "make -s", you will notice that the UPDATE_CONFIG_HOOK message
has an extra space compared to other highlighted messages. For example:
>>> util-linux 2.20.1 Updating config.sub and config.guess
>>> util-linux 2.20.1 Patching libtool
>>> util-linux 2.20.1 Autoreconfiguring
A grep shows this is the only instance of the extra space. This patch
removes the extra space.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The patches to oprofile 0.9.7 seem still relevant for 0.9.8, but for some
reason they were not upstepped.
[Peter: drop version number from patch filenames]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
JSON-GLib is a library providing serialization and deserialization
support for the JavaScript Object Notation (JSON) format described by
RFC 4627.
https://live.gnome.org/JsonGlib/
[Peter: add license info, tweak help text]
Signed-off-by: Henrique Camargo <henrique@henriquecamargo.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Little CMS intends to be an OPEN SOURCE small-footprint color management
engine, with special focus on accuracy and performance.
[Peter: tweak help text, fix white space]
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The zeromq package was recently bumped from version 2.2.0 to version 3.2.2,
which has introduced a requirement for IPv6 support in the toolchain. At
present, IPv6 support is mandatory in zeromq: there is no configuration option
to enable/disable the feature.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Use the <pkg>_CONFIG_SCRIPTS mechanism to handle the sdl-config
script, so that it properly gets removed from the target. However, we
can't completely remove the manual fixup, because it also takes care
of removing the -Wl,-rpath option, which the general
<pkg>_CONFIG_SCRIPTS doesn't do.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
urg installs two <foo>-config scripts, so the ones installed in
$(STAGING_DIR) should be fixed up, and the ones installed in
$(TARGET_DIR) should be removed. Use the <pkg>_CONFIG_SCRIPTS
infrastructure to do this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The urg.mk file mentions a LGPLv3+ license. However, none of the
source code in the urg package carries a copyright notice that
indicates the "v3 or later". The only license information we have is
the COPYING file, that contains the text of the LGPLv3
license. Therefore, we should probably assume that the code is under
LGPLv3 only.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Google's framework for writing C++ tests on a variety of platforms (Linux,
Mac OS X, Windows, Cygwin, Windows CE, and Symbian). Based on the xUnit
architecture. Supports automatic test discovery, a rich set of assertions,
user-defined assertions, death tests, fatal and non-fatal failures, value-
and type-parameterized tests, various options for running the tests, and XML
test report generation.
Gtest also allows to easily build testsuites for C programs.
This package allows running testsuites on the target which might be
advantgeous in certain cases.
http://code.google.com/p/googletest/
[Peter: Tweak Config.in, use GTEST_VERSION in _SOURCE]
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This adds support for Pragmatic General Multicast protocol on raw
IP (PGM, RFC 3208) or UDP frames (EPGM) for use as zeromq reliable
multicast transport. The library relies on openpgm package to
implement the protocol itself.
Signed-off-by: Alexander Lukichev <alexander.lukichev@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
OpenPGM is an open source implementation of the Pragmatic General
Multicast (PGM) specification in RFC 3208 available at www.ietf.org.
It is required for PGM/EPGM support in ZeroMQ library.
Signed-off-by: Alexander Lukichev <alexander.lukichev@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When using rsync to import package sources (typically with
PKG_OVERRIDE_SRCDIR), it often happens that these external sources
are under version control, and contain directories like .git,
.hg, etc.
Depending on the project, these directories can become pretty large
and typically have a lot of files. Moreover, they are not necessary
in the context of building the package. Therefore, this commit adds
the --cvs-exclude option to the rsync call, saving both disk space
and sync time.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since ROOTFS_DEVICE_TABLES is a concatenation of two strings separated by
spaces, there will always be a space in it, which means it's never empty.
Therefore, when testing for empty, the condition never evaluate to false.
The following change fixes this problem; it runs qstrip on the overall
combination of the variables, causing the space to be removed if it's the
only thing left.
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Thomas De Schampheleire <patrickdepinguin+buildroot@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
AT91Bootstrap 1.x seems to have disappeared from atmel.com (but return
HTML instead of a 404), so use the at91.com FTP server instead.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This is the time zone database, used by glibc for translations between
UTC and local time.
Signed-off-by: Richard Braun <rbraun@sceen.net>
[yann.morin.1998@free.fr: use global ZIC, install posix TZ only once]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This is the zone information compiler, used to compile the time zone
database.
Signed-off-by: Richard Braun <rbraun@sceen.net>
[yann.morin.1998@free.fr: export ZIC for all to use]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The host build of icu doesn't need to build everything, so we can add
a few more --disable-<foo> options to save a little bit of build time.
On a fast build server, this bring the host icu build from 2m28.517s
to 2m5.192s.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When passed --enable-static and --enable-shared, icu will generate
both a shared and a static version of its libraries.
However, in order to do so, it builds each and every object file
twice: once with -fPIC (for the shared library), and once without
-fPIC (for the static library). While admittedly building -fPIC for a
static library generates a slightly suboptimal code, this is what all
the autotools-based project are doing. They build each object file
once, and they use it for both the static and shared libraries.
icu builds the object files for the shared library as .o files, and
the object files for static library as .ao files. By simply changing
the suffix of object files used for static libraries to ".o", we tell
icu to use the ones built for the shared library (i.e, with -fPIC),
and avoid the double build of icu.
On a fast build server, this brings the target icu build from
3m41.302s down to 1m43.926s (approximate numbers: some other builds
are running on the system at the same time).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Many of ARM Sourcery CodeBench toolchain have a bug when compiling
icu's translit.cpp source file. The bug is trigerred when there is a
combination of "-W -Wall" and "-Os", and causes an internal compiler
error. The bug has been reported to Mentor Graphics.
Even though it is clearly a toolchain bug, having a workaround for it
is trivial in this case. So it will avoid our users falling into this
internal compiler error, and allow our autobuilders to test more
packages using this Sourcery CodeBench toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Flot plugin for computing bottoms for filled line and bar charts.
[Peter: fixup help text]
Signed-off-by: Arnaud Rébillout <rebillout@syscom.ch>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This is the beginning of the Qt5 packaging. This commit allows to
build only the qtbase module, which contains QtCore, QtNetwork, QtXml,
QtTest, QtSql and QtConcurrent.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In addition to the command-line tool gdisk and the interactive tool
sgdisk, gptfdisk also provides a ncurses based tool, cgdisk. This
commit adds support for building and installing this tool.
[Peter: Update gdisk autoselection logic to consider cgdisk as well]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of always disabling the UTF16 support, make it
configurable. When ICU is available, enable UTF16 support, otherwise
disable it.
[Peter: wrap long line]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The installation step was not giving the full destination path even
though it was using -D, and it was forgetting to explicitly specify
the permissions of the file to install. This commit fixes both of
these minor issues.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
$(TARGET_CONFIGURE_OPTS) should be passed as $(MAKE) argument, not in
the environment. We can then remove the redefined CC and LD variables
that were useless. We also take this opportunity to pass
$(TARGET_MAKE_ENV) in the environment of make.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Until now, selecting just the gptfdisk package wouldn't do anything.
It wouldn't build anything at all, and wouldn't install anything.
This is rather odd.
So now, we ensure that at least one of the two tools that gptfdisk can
build and install is selected. This allows use to factorize a bit the
select of util-linux in Config.in, and remove the if condition in the
makefile that was preventing the package from being built if no tools
was selected.
[Peter: Reword commit text]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In order to match the new upstream name, rename the gdisk package to
gptfdisk. We add the relevant legacy configuration options to ensure a
smooth transition for users.
[Peter: fixup Config.in indentation]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
jpeg is a virtual package, but since it is listed in the dependencies
of other packages, it should obey to all the normal make rules for
packages. Notably, the jpeg-show-depends target is mandatory for the
graph-depends script to work.
Instead to implement such a make target manually, make jpeg a normal
generic-package, except that it doesn't have any source.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Before creating a real virtual package named 'jpeg', we want to ensure
that no package is using the host variant of the virtual
package. Instead, we make them use directly the host-libjpeg package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump to latest 2.22.2 version and revamp available options.
* Remove the assumed enable/disable defaults since these seem to change
quite often, so do what's wise and always enable/disable things.
* Switch from build "X" menu options to just X, add some help and sort.
* Introduce new option to install binaries (or not) to reduce bloat for
packages that just need libblkid and/or libuuid.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Obvious fix to the startup script: 'restart' is 'stop+start',
not 'stop+stop'.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump ser2net to version 2.8.
Exclude for nommu (uses fork).
Version 2.7 also did, guess the autobuilders never caught it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
By default, glib builds its own internal copy of the pcre library, but
it also allows to use the one available from the system. Use this
possibility when pcre is already selected in the Buildroot
configuration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add a patch that provides an additional --disable-tests option to the
configure script.
Disabling the build of tests has two benefits:
* Prevents the build of a lot of code that doesn't build on noMMU
platforms.
* Reduces the build time.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
aircrack-ng uses fork() and therefore fails to build on non-MMU
systems:
aircrack-ng.o: In function `_clean_exit':
aircrack-ng.c:(.text+0x555c): undefined reference to `_fork'
collect2: ld returned 1 exit status
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit 7154798a46 (pcre: add support for 16 bits and 32 bits
variants), added in preparation to the introduction of the Qt5
packages, could break other packages that use pcre.
Even though by default the pcre 8 bits library is selected if no other
variant is selected, a randpackageconfig, or an user, could
potentially enable the 16 bits variant even if a package requires the
8 bits variant.
This has caused a number of build breakage on packages like ngrep,
cegui, nmap and others in the autobuilders.
In older to solve this, we simply unconditionally build the 8-bits
variant. Since each variant is only ~90k in size, it's probably not
worth the effort giving the possibility of building the 16 bits
variant only.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The xcb-util lacks a dependency on libxcb. Without this dependency, it
fails to build with:
checking for XCB... no
configure: error: in `/home/thomas/projets/buildroot/output/build/xcb-util-0.3.9':
configure: error: The pkg-config script could not be found or is too old. Make sure it
is in your PATH or set the PKG_CONFIG environment variable to the full
path to pkg-config.
Alternatively, you may set the environment variables XCB_CFLAGS
and XCB_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When building autoconf for the target, we already passed EMACS="no" to
prevent autoconf from building Emacs mode files. But we weren't doing
that when building autoconf for the host. This causes problems when
'emacs' is not really emacs, but a sort of clone like Jove. So we also
pass EMACS="no" when building host-autoconf to avoid autoconf
./configure script from detecting emacs and then use it to build .elc
files from .el source code.
Reported-by: Spielmann Werner <Werner.Spielmann@swarovski.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Those acceleration libraries typically have multiple implementations:
some are free (Mesa), some are proprietary (generally SoC specific).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Until now, we have been building only the 8bits PCRE variant. However,
Qt5 requires the 16bits variant. This commit therefore adds support to
build the 16bits and 32bits variants of PCRE. In order to preserve
backward compatibility, the 8bits variant is automatically chosen if
no specific variant is defined.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since the introduction of the post-image mechanism, the graph-depends
script is broken: it tries to call 'make
target-post-image-show-depends', which doesn't exist since
'target-post-image' is not a package.
So we should simply ignore this 'target-post-image'.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Libtasn1 is the ASN.1 library used by GnuTLS, GNU Shishi and some
other packages. It was written by Fabio Fiorina, and has been
shipped as part of GnuTLS for some time but is now a proper
GNU package.
[Peter: Both licenses are '+']
Signed-off-by: Stefan Fröberg <stefan.froberg@petroprogram.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Aircrack-ng is a set of tools for auditing wireless security.
[Peter: mention that iw is a runtime dependency, use MAKE1]
Signed-off-by: Laurent Cans <laurent.cans@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Disable C++ and Ada bindings in host-ncurses, since those are not
needed. Save 9 seconds of build time on my laptop.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The installation of manpages during the installation step of
host-ncurses and ncurses is horribly slow, and useless. This commit
therefore disables the installation of those manpages, using the
--without-manpages configuration option.
It brings the combined host-ncurses+ncurses configure/build/install
time from 3 minutes and 18 seconds to 1 minute and 36 seconds.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Stress is linked statically if the --enable-static is specified.
However, this option is always specified in the global
SHARED_STATIC_LIBS_OPTS to tell packages to build static libraries,
if supported.
If the BR2_PREFER_STATIC_LIB is not defined, we have to specify
--disable-static explicitly to get stress linked dynamically.
Signed-off-by: Tzu-Jung Lee <tjlee@ambarella.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Version 3.8 of gpsd has been released, which includes some patches sent
upstream by Thomas Petazzoni. This patch bumps the gpsd package version,
and removes the upstreamed patches.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: Reword, add SV4_DEPRECATED, move to help text]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: update comment dependency, use DOSFSTOOLS_LDFLAGS for all flags]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Problematic configurations not bumped:
arm-versatilepb - IRQ failure for symbios scsi
sh4-r2d - Qemu still doesn't emulate advanced features from the UART
sparc-ss10 - Illegal instruction
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Also mark 3.6.x as deprecated to match upstream EOL.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When selecting the Qt declarative module, all the QML imports was
built and installed to staging, but never installed to the target.
Signed-off-by: Daniel Nyström <daniel.nystrom@timeterminal.se>
Acked-by: Alexander Lukichev <alexander.lukichev@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The mii-diag buildsystem doesn't correctly encode the needed
dependencies, so the install step can race against the mii-diag-udeb
(through all) to either cause mii-diag to be built for the host or
not be available when 'install' is executed.
Work around it by explicitly calling the needed steps and not building
the (unused) udeb version at all.
Fixes http://autobuild.buildroot.net/results/4825d267025c74c522077f84330b47f1110315fa
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The BR2_KERNEL_HEADERS_2_6_35 symbol no longer exists since some time,
so get rid of code that was specific to this kernel version.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This is only the bare minimum needed to build the textual tshark utility.
Support for more options, including the wireshark GUI, can be added later.
[Peter: point includedir at staging to workaround host/target headers issue]
Cc: Stefan Fröberg <stefan.froberg@petroprogram.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
this patch bumps json-c to version 0.10 and adapts the no-reentrant patch
to the new version.
Signed-off-by: Andreas Wetzel <andreas.wetzel@nanotronic.ch>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As recommended by Yegor Yefremov for f2fs-tools some firewalls might
restrict the git port and make life harder.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes JSON DoS (CVE-2013-0269) and REXML DoS (no assigned CVE yet).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The existing Microblaze toolchains that we have have the annoying
property of being based on a very old glibc version: 2.3.6. Xilinx
provides newer toolchains with glibc 2.14, generated by Crosstool-NG,
but they are only available as part of a huge Git repository that
contains the gcc, Linux, binutils, glibc sources unpacked (4.4 GB
total), which makes is very unpractical.
I contacted the Xilinx person who did those toolchains, but they
apparently didn't intend to change that anytime soon.
So, we have created a tarball for those toolchains, adding a
README.txt file in the tarball that points back to the original
location that contains the source code for them. Those tarballs are
hosted on sources.buildroot.net.
This commit then adds support for those two new external toolchains,
one for little endian Microblaze, another one for big endian
Microblaze.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The dependency on zlib is correctly expresed in vtun.mk,
but was missing from the Config.in.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Against all odds, vtun had a new release sometime last year.
Still, the code needs patching:
- the existing patch to fix installation has been refreshed
- the existing patch to fix blowfish header location has been
replaced (see below)
- configure looks in hard-coded, host paths (eg. /usr/include)
without any consideration for scross-compilation
--> new patch
- configure.in does not even pass an autoreconf without a
bit of love first (it's written in an ancient dialect that
autoreconf does no longer recognise)
--> new patch
Remove obsolete, unused, bit-rotting scripts and warning.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The dependency on zlib is correctly expresed in vtun.mk,
but was missing from the Config.in.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This reverts commit 1d8c3e6caf
The forward port breaks compilation at least for SPARC NPTL toolchains:
LD libuClibc-0.9.33.2.so
libc/libc_so.a(pipe.os): In function `__GI_pipe':
(.text+0x38): undefined reference to `__GI___errno_location'
collect2: ld returned 1 exit status
Easily triggered by a "make qemu_sparc_ss10_defconfig && make".
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Otherwise the build fails with:
In file included from mbdesktop_win_plugin.c:1:0:
mbdesktop.h:31:18: fatal error: zlib.h: No such file or directory
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Without this patch programs using libglib2 (libsoup, etc.. ) and pthread
may be broken.
Signed-off-by: Sagaert Johan <sagaert.johan@skynet.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The option BR2_LINUX_KERNEL_INSTALL_TARGET used to install the kernel in
/boot in the rootfs. The introduction of the device tree builds made it
possible to generate device tree blobs, and stored them in IMAGES_DIR
like the kernel, but didn't copy the dtb in /boot when _INSTALL_TARGET
was enabled.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It makes more sense to use a released version for 2013.02 rather than a
git snapshot.
The build system now correctly installs libffi.pc, so we can drop the
manual install.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The BusyBox watchdog application supports reset periods specified in
milliseconds. The Buildroot package will only allow an integer reset period,
which prevents the use of the required "ms" suffix. Change the watchdog period
configuration item to a string, to allow the use of the "ms" suffix.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes a regression in 3.1.7 regarding the priority string NORMAL.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The internal libfuse-lite implementation uses it, and since the external
full-blown libfuse also requires it there's no other choice.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
neard uses the linux/nfc.h header which is fairly recent, so we have a
patch that creates linux-nfc.h and uses it if necessary. However, since
the bump to 0.9, neard uses some symbols that are introduced in linux 3.7
so the build fails with headers 3.1 (which introduced nfc.h) to 3.6.
To resolve that, add a check for one of the newly introduced symbols
(that is used by neard).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In 9229b82d63 ('libcurl: needs MMU'),
the libcurl package was disabled on non-MMU systems, due to the usage
of the fork() function in the library.
However, a deeper inspection reveals that fork() is only used in the
implementation of NTLM, an obscure, undocumented, Microsoft specific
authentication method that apparently isn't common anymore. See
http://curl.haxx.se/docs/manpage.html#--ntlm.
Therefore, this commit re-enables libcurl on non-MMU systems by
explicitly disabling the NTLM support. If someone ever needs NTLM
support in Buildroot's libcurl package, it will always be time to add
a libcurl sub-option to enable it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: Drop *.patch.<arch> description as noted by Thomas]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The LIBVORBIS_SITE included a reference to $(LIBVORBIS-SOURCE), which
doesn't exist. And anyway was useless because the <pkg>_SITE variable
should not contain the name of the tarball.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Our patches do not apply as-is against the version of rpi-userland we
package (weird...).
Since rpi-userland does not have releases, and is a relatively fast-moving
target, just bump the version to the latest cset from the git tree, and
get rid of one our failing patch, since it was applied upstream.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When using the --with-icu option without specifying the directory, boost's
bootstrap.sh script will look at "common" locations (lines 289-294):
COMMON_ICU_PATHS="/usr /usr/local /sw"
for p in $COMMON_ICU_PATHS; do
if test -r $p/include/unicode/utypes.h; then
ICU_ROOT=$p
fi
done
With buildroot it may surely become problematic at some point.
Signed-off-by: Ignacy Gawędzki <i@lri.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libgpg-error installs a gpg-error-config script, but it wasn't fixed
up properly. Use the <pkg>_CONFIG_SCRIPTS to handle this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Samuel Martin" <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The packages changed by this commit were not only changing prefix= and
exec_prefix= during their <foo>-config fixups, they were also changing
includedir= and/or libdir=. So, they could not be directly converted
to the new <pkg>_CONFIG_SCRIPTS infrastructure.
However, a careful analysis of their default <foo>-config shows that
includedir= and libdir= is defined relatively to either ${prefix} and
${exec_prefix}. Therefore, the manual fixing of includedir= and
libdir= is useless, and fixing prefix= and exec_prefix=, as done by
the <pkg>_CONFIG_SCRIPTS mechanism is sufficient.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Samuel Martin" <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Use the <pkg>_CONFIG_SCRIPTS mechanism in all packages for which it
does all what the package was doing. A few packages, like libxslt, are
for now left out, since they need some additional fixup (for example a
fixup of includedir).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The <foo>-config scripts are useless on the target, since they are
only needed for development, so we remove them automatically.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: "Samuel Martin" <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit renames the newly introduced <pkg>_CONFIG_FIXUP variable
to <pkg>_CONFIG_SCRIPTS, for two reasons:
* <pkg>_CONFIG_SCRIPTS will not only "fixup" the scripts in
$(STAGING_DIR)/usr/bin, but also remove them from
$(TARGET_DIR)/usr/bin. So it is not only about doing a "fixup".
* On the principle, it is strange that the variable carries an
indication of the action that will take place on those files. It
should rather be named to say "Here are the <foo>-config scripts",
and let the package infrastructure decide if it should fix them up,
remove them, etc.
This commit also updates the documentation accordingly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: "Samuel Martin" <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This makes it possible to put empty directories in the overlay.
Thanks to Aras Vaichas for pointing that out.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since the post-image config option uses the plural for "Custom
scripts", do the same for the post-build config option, for
consistency.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The order of the solutions to customize the root filesystem is
changed: we now mention the post-build script mechanism *before* the
custom root filesystem skeleton mechanism, because the former is
preferred over the latter.
In addition to this, we give a few more details about direct
customization of the root filesystem in output/target, and about the
custom target skeleton solution.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Just like we have a post-build script mechanism that gets executed
after the build of all packages but before the creation of the
filesystem images, let's introduce a post-image script mechanism, that
gets executed once all filesystem images have been generated.
This can for example be used to call a tool building a firmware image
from different images generated by Buildroot, or automatically extract
the tarball root filesystem image into some location exported by NFS,
or any other custom action.
[Peter: fix image script check]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Kconfig does not accepts that a symbol that is part of a choice
be affected a default value.
Fix this by introducing a dummy EABI symbol, and make the real
EABI symbol a prompt-less option that depends on !OABI.
[Peter: drop arm dependency, rename to EABI_CHOICE]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes http://autobuild.buildroot.org/results/e184fcb1c100e9d8aa3d9f18a8caee8c0839e207
Contrary to what the .mk file states, proxychains-ng doesn't use autotools.
Instead it uses a handwritten configure script, so convert it to
generic-package.
This handwritten configure script generates config.mak which is then
included by the Makefile. Unfortunately config.mak does:
CC ?= $(TARGET_CC)
But as make sets CC to 'cc' by default, this never does anything - So
it ends up using the host compiler (and target CFLAGS), breaking the build.
Fix it by passing the correct CC setting at build time as well.
While we're at it, also cleanup the package by using 'make install-config'
to install the configuration file.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Update {ea3250,fdi3250,phy3250}_defconfig to lock down kernel headers to
an appropiate version.
Otherwise the target is building with, at the moment of this writing,
version 3.7 headers and a 2.6.34 kernel which usually isn't wise.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The BR2_ARM_EABI config symbol is still kept in order to minimize
the impact.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The manual linux headers option may specify versions other than the 2.6
series, so drop the "2.6"
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libsndfile requires sizeof(sf_count_t) == 8, where sf_count_t is a
typedef alias for off_t. This is not true by default for all
tool-chains, which leads to a runtime assert failure in binaries
compiled against libsndfile. See:
http://permalink.gmane.org/gmane.comp.audio.libsndfile.devel/229
Add a dependency on BR2_LARGEFILE for libsndfile, and a comment if
BR2_LARGEFILE is not selected.
[Thomas: rebased patch, added more propagation of the new
BR2_LARGEFILE dependency to gst-plugins-good and mpd.]
Signed-off-by: Ryan Mallon <rmallon@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Store BR2_DEFCONFIG in .config, and use it to update the original input
defconfig file after updating the configuration. When a config is
created by using the BR2_DEFCONFIG=... option, this is saved in the
.config file; later runs of savedefconfig will update that same location.
It is also possible to configure this place in the interactive
configuration.
The BR2_DEFCONFIG value itself is not saved into the generated
defconfig, since Kconfig considers it at its default. This is
intentional, to avoid hard-coding an absolute path in the defconfig.
It will anyway be set again when the defconfig is used with the
'make BR2_DEFCONFIG=... defconfig' command.
As a side-effect of this change, the *config options have been moved out
of the BR2_HAVE_DOT_CONFIG condition. This doesn't make any functional
difference, because the .config is still not read for the *config targets.
However, the defconfig and savedefconfig targets do need to include
.config now, which makes them slightly slower.
[Peter: slightly tweak help text]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Before the config file can be copied, it has to exist. The
other xxx-update-config targets do this as well.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The filesystem overlay is a tree that is copied over the target fs
after building everything - which is currently usually done in the
post-build script.
[Peter: don't ignore missing directories]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Reuse part of board-support.txt, and remove that one because it
was unused.
[Peter: minor tweaks to text]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This makes sure that the most interesting ones are at the top.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The help text is moved to comments.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We already had backported patches for the Blackfin and AArch64
support, and now we would have needed to also backport the Xtensa
support and the Microblaze support. This starts to get crazy.
Let's switch to using a Git version from Github, until libffi finally
releases a new stable version.
In order to achieve this, we also need to:
* autoreconf the package, so that a libffi.pc file gets generated
* manually install the libffi.pc file, because it doesn't get
installed by libffi Makefile, for some reason
* remove the part of the target post install hook that was messing
with libffi.pc, since it was modifying the one in STAGING_DIR
(which is odd for a target post install hook), and the libffi.pc
file is anyway not installed to the target anymore.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Thomas Petazzoni: rename patch to not have the package version in the
patch file name, adjust the commit title.]
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As we are going to add an Xtensa related patch that needs to be
applied *after* the AArch64 patch, let's first add a number to each
util-linux patch file name, so that we know they will be applied in
the right order.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The external toolchain wrapper sets sysroot etc. to an absolute path.
By changing this to a relative path, it is possible to move the host
directory to a different location and still have a working build
system.
This only works for a downloaded external toolchain. For a pre-installed
external toolchain, it is possible to move the host directory to a
different location, but not the external toolchain directory (it does work
if the external toolchain directory lies within the host directory). For
an internal or crosstool-ng toolchain, there is no wrapper so updating the
sysroot path should be done in a different way.
See http://lists.busybox.net/pipermail/buildroot/2012-February/050371.html
for information about others things to do to make the host directory
relocatable.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This reverts commit f1b86cef98
While the fix makes gnutls build without wchar, it doesn't actually work as
there's no rpl_wctomb implementation so the .so ends up with an undefined
reference to wctomb:
./host/usr/bin/arm-linux-nm -D staging/usr/lib/libgnutls.so.28|grep wctomb
U wctomb
Causing linker errors for packages trying to use it:
CCLD msmtp
host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libgnutls.so:
undefined reference to `wctomb'
collect2: ld returned 1 exit status
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch will add <pkg>_CONFIG_FIXUP variable to buildroot infra.
It's purpose is to inform buildroot that the package in question
contains some $(STAGING_DIR)/usr/bin/*-config files and that we
want to automatically fix prefixes of such files.
It is often the case that many packages call these
files during their configuration step to determine 3rd party
library package locations and any flags needed to link against them.
For example:
Some package might try to check the existense and linking flags
of NSPR package by calling $(STAGING_DIR)/usr/bin/nspr-config --prefix.
Without this fix. NSPR would return /usr/ as it's prefix which is
wrong when cross-compiling.
Correct would be $(STAGING_DIR)/usr.
All packages that have <pkg>_INSTALL_STAGING = YES defined and
also install some config file(s) into $(STAGING_DIR)/usr/bin must
hereafter also define <pkg>_CONFIG_FIXUP with the correspondig
filename(s).
For example:
DIVINE_CONFIG_FIXUP = divine-config
or for multiple files:
IMAGEMAGICK_CONFIG_FIXUP = Magick-config Wand-config
Signed-off-by: Stefan Fröberg <stefan.froberg@petroprogram.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit fixes the exact same problem than
21a0c11a90, but for the gdbserver
build. The problem is that when you use the Crosstool-NG toolchain
backend, gawk gets built as a dependency of Crosstool-NG. So the gdb
configure scripts detects it, and assumes it is in the PATH (because
the gdb configure step gets run with TARGET_MAKE_ENV).
But then, the build fails, because it tries to run gawk, but gawk
isn't in the PATH, because we forget to use this TARGET_MAKE_ENV
variable when building gdbserver.
Fixes http://autobuild.buildroot.org/results/d0173de533b5e2fffed2eff7327a502ed2d787cd/build-end.log
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It's moved from wireless.kernel.org to generic kernel.org
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: make mutual exclusive with dmsetup-only, drop special install / make]
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Without this change if some package which have dependency on device mapper
and use pkgconfig to check version always fail to find library because
devmapper.pc file wasn't installed.
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add a uClibc patch from OpenWRT, and tweak an existing patch to cope with
the lack of a dup3 Linux syscall on avr32. This allow uClibc 0.9.33.2 to be
built for avr32.
[Peter: add upstream url for openwrt patch]
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
According to the ARM1136JF-S and ARM1136J-S Revision r1p5 Technical Reference
Manual, from release rev1 (r1pn), the ARM1136JF-S processor implements the ARMv6
instruction set with the ARMv6k additions.
This patch differentiates the ARM1136JF-S revisions 0 and 1 in order to use
either ARMv6j (e.g. on Freescale i.MX31) or ARMv6k (e.g. on Freescale i.MX35).
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The original cJSON submittal downloaded a .zip file from SourceForge.
The .zip file did not have a version number, making it impossible
to gaurantee that the same archive is downloaded on any given build.
It also required a custom EXTRACT command.
This patch changes the source for cJSON to the svn repository
listed on the sf project web page - giving us an actual version
number, and letting us use buildroot's normal extraction functionality.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some of the generated object files are too large for PC-relative addressing,
so use the -mtext-section-literals compiler flag to move symbols closer to
the code.
[Peter: fix commit message]
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The Calibrator is a small C program that is supposed to analyze
a computers (cache-) memory system and extract the following
parameters:
number of cache levels
for each cache level:
its size
its linesize
its access/miss latency
main memory access latency
number of TLB levels
for each TLB level:
its capacity (i.e. number of entries)
the pagesize used
the TLB miss latency
http://homepages.cwi.nl/~manegold/Calibrator/
It is also recommended as a load generator for realtime testing in:
https://rt.wiki.kernel.org/index.php/RT_PREEMPT_HOWTO#Benchmarking
[Peter: reformat help text, fix extract step]
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Python3 changes the pyc lookup strategy, ignoring the
__pycache__ directory if the .py file is missing. Change
install location to enable use of .pyc without their parent .py
See http://www.python.org/dev/peps/pep-3147
[Peter: add patch header]
Signed-off-by: Daniel Nelson <daniel@sigpwr.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout at mind.be>
(untested)
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit reworks the build and install steps of the olsr package,
to fix a number of problems and do minor improvements:
1. The build step was doing "make <foo>" for each
plugin. Unfortunately, inside olsr build system, doing "make
<foo>" for a plugin triggers a clean of the plugin directory, a
build, and then an installation of the plugin. This installation
fails because DESTDIR is not passed at the install step. This
leads to build issues like
http://autobuild.buildroot.org/results/a9fed78cd0b3991763a797c38387edd4157fbdb9/build-end.log. To
fix this, we call make in each plugin's directory, which is what
"make <foo>" was doing internally.
2. The install step was manually installing the olsrd binary. We now
instead use the install_bin make target that comes in olsr's build
system.
3. The install step was manually installing the olsr plugins. We now
instead use the install make target available in each plugin's
makefile.
4. We use 'install' to install the init script, which avoids the
manual creation of /etc/init.d.
5. We use 'install' to install the sample configuration file.
6. We remove the useless strip commands.
7. We add a patch that allows us to pass LDCONFIG=/bin/true to avoid
ldconfig being called during the installation process.
8. We remove commands from the clean step that were in fact
uninstallation commands. We don't bother re-adding those commands
in an uninstallation step, since it is now generally accepted that
the uninstall step is quite useless and should be deprecated.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: License is GPLv2+, move out of package/multimedia]
Signed-off-by: Patrick Gerber <kpa_info@yahoo.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Vsftpd needs an empty directory where it can chroot.
If /usr/share/empty isn't present it refuses to work in the default
configuration.
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Added the iftop package which is really useful to see quickly
what uses the bandwidth on your machine.
[Peter: move to 'Networking applications', fix license]
Signed-off-by: Bogdan Radulescu <bogdan@nimblex.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* re-introduce lttng-tools-no-sync-file-range-in-uclibc.patch
(merged upstream just after the 2.1.1 release)
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The input/gfx drivers handling got broken by the ':=' -> '=' conversion,
as we redefine the variables in terms of themselves, causing recursion.
Fix it by directly assigning the result to DIRECTFB_CONF_OPT instead.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
802.11ac support isn't enabled on purpose since it's broken on some
architectures.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
vsftpd comes with a sample config file that can serve as a starting
point for customization and enables a basic functionality.
[Peter: drop /usr/share/empty creation]
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Thus, the failing step can be easily extracted by autobuilders,
to ease with post-mortem analysis.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Thus, the failing step can be easily extracted by autobuilders,
to ease with post-mortem analysis.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Thus, the failing step can be easily extracted by autobuilders,
to ease with post-mortem analysis.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Thus, the failing step can be easily extracted by autobuilders,
to ease with post-mortem analysis.
At the same time, remove two debug echoes (Arnout).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Thus, the failing step can be easily extracted by autobuilders,
to ease with post-mortem analysis.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
mcookie is not actually used by the Xorg server; it is used by xinit to
generate a xauth cookie before starting the server.
Verified with 'ack-grep -a mcookie build/x*' in an output directory with all
packages selected. The only other package that matches is x11vnc: it does a
runtime check for mcookie and falls back on /dev/random if it's missing.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The httping makefile by default appends -O3 to CFLAGS, overriding the
optimization flags set in Buildroot, so pass OFLAGS= to disable this.
The DEBUG=no argument has to be passed on the make cmdline and not in the
environment to take effect, as it is unconditionally set in the Makefile.
Notice that it shouldn't be passed to 'make install', as that otherwise
will try to run the host strip program.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It is not necessary to override CFLAGS when CFLAGS is passed through
the environment rather than as an argument to make.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This makes things easier to understand and more consistent with the pkg-infra.
For example, it removes the need for '$$@' in the CMD variables of fs/*/*.mk.
It also makes it possible to update the variables later, e.g. in the package
override file.
It also makes sure that the date will be recorded correctly in Yann E. Morin's
patch that logs the MESSAGE macros to a file.
The fs/*/*.mk must be updated as well because the '$@' shouldn't be quoted
anymore in the CMD variables or the hooks.
The $(eval ...) for the dependencies is redundant, because the $(ROOTFS_TARGET)
variable is already eval'd. Note that it is only redundant if the evaluation of
the uses of the variable is also delayed.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
There is no real reason to keep copyright notices in just four
packages, while none of the other packages have such copyright
notices.
The license is already clearly announced by the COPYING file in the
top Buildroot source directory. The authors are clearly credited
through the Git history of the project.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Finally get rid of all := used for variable definitions in packages,
as we suggest in our manual and during the review of new packages.
While I was at it, I also sometimes added a few missing new lines
between the header and the first variable definition.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The wireless_tools installation process calls ldconfig to update the
ld.so cache, but in a cross-compilation situation, it doesn't make
sense, and simply takes time for nothing. To avoid this, we pass
LDCONFIG=/bin/true during the wireless_tools installation steps.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: use 2.0.23 instead of .24 because of build issues with .24]
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The gd package configure call 'libpng-config' to get the compiler
flags required to use the libpng. The configure correctly allow to
specify the path of the staging libpng-config by using the
ac_cv_path_LIBPNG_CONFIG but the configure.ac call simply
'libpng-config' instead of the specified one. The configure.ac is now
modified to call the specified libpng_config.
[Peter: explictly pass --without-png instead of auto detect]
Signed-off-by: Jean-Christian de Rivaz <jc@eclis.ch>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
proxychains installation does not copy proxychains.conf to
$(TARGET_DIR)/etc anymore so we have to do it manually now.
Signed-off-by: Stefan Fröberg <stefan.froberg@petroprogram.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: GPLv2 / GPLv2+ mix as pointed out by Arnout]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Our default (busybox) rc.S implementation requires init scripts to be
named S??*, so rename the openvpn one to S60openvpn (E.G. after network).
At the same time remove the deprecated check-if-custom-skeleton-provided-file
and just always install the init script. People can always fixup/remove
it in their post-build script if needed.
Also name the init script source the same as the destination file name in
TARGET_DIR for consistency.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Toolchain IPv6 support isn't optional any more.
New PolarSSL backend besides the usual OpenSSL one.
New small binary option, reduces binary file size ~100 KiB depending on
target architecture.
Removed no crypto option - it still requires some SSL library headers
and it's pointless anyway, after all we're talking about a VPN solution
here.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
At the moment, the boost build is very verbose, it gives both the
Jam-level command being executed, and the underlying system command
being executed, with lots of newlines. Makes it hard to see where the
failure is when there is one.
So, we reduce the verbosity level to -d+1, which only gives the
Jam-level command. So now, it looks like:
common.copy /home/test/outputs/e/host/usr/aarch64-buildroot-linux-gnu/sysroot/usr/include/boost/geometry/multi/multi.hpp
common.mkdir /home/test/outputs/e/host/usr/aarch64-buildroot-linux-gnu/sysroot/usr/include/boost/geometry/strategies
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.7.3/release/threading-multi/icu.o
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.7.3/release/threading-multi/regex_debug.o
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.7.3/release/threading-multi/regex_raw_buffer.o
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Boost normally allows to build a non-threaded variant by passing
threading=single or a multi-threaded variant by passing
threading=multi.
Unfortunately, the build of threading=single doesn't seem to work any
more, due to bizarre things in the build system. We get "duplicate
target" errors, that according to
http://lists.boost.org/boost-build/2012/11/26582.php should appear if
we ask for both threading=single,multi. But it seems to happen even in
the threading=single case.
Since Boost is such a big C++ beast, it probably doesn't make much
sense to try to support it on toolchains that don't have thread
support. So, we make the boost package depend on thread support. If
someone cares enough in getting Boost to work in a non-threaded
environment, then we can always revert back.
Note that the boost package has no reverse dependencies in Buildroot,
so we don't need to propagate this new dependency anywhere.
Fixes:
http://autobuild.buildroot.org/results/439e72ac74c8058f30977e6abc39acd6379a17d3/build-end.log
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
- Use a more descriptive name, the same of the "toolchain" directory.
- Add missing dependencies to be able to successfully use the target
right after the configuration.
- Move to a better position.
- Documentation it in the help target.
- Use toolchain target in the world target
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Reviewed-by: Markos Chandras <markos.chandras at imgtec.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout at mind.be>
Acked-by: Samuel Martin <s.martin49 at gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Httping is like 'ping' but for http-requests.
Give it an url, and it'll show you how long it takes to connect,
send a request and retrieve the reply (only the headers)
[Peter: Drop ssl option, use make install, misc cleanup]
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes:
http://autobuild.buildroot.net/results/86534588d192fe1515ce520c109e884864871d94/
and others.
Webkit includes X11 headers even when configuerd for DirecfFB, because
the test within GNUmakefile.in does not work properly. Autoreconfigure
fails because of incompatibility with buildroot's autotools version.
For now a patch for GNUmakefile.in fixes this problem.
Since webkit release is quite old it doesn't seem to be worth doing more,
on the long run we should bump the version.
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The current version of strace does not support the Xtensa architecture.
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As requested by Peter, add a bit of documentation in the
eclipse-register-toolchain script, and add a few more checks (even
though this script is not intended to be executed manually, which is
also now mentionned in the documentation).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We don't always want all the font sets on small systems.
[Peter: cleanup Config.in, ensure target dir gets created first]
Signed-off-by: Charles Manning <cdhmanning@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Allow to configure the DBus interfaces that the wpa_supplicant
binary should support (old or new or both). Also allow to
enable introspection support on the new DBus interface.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(build-test with all features enabled)
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Putting $(TARGET_CONFIGURE_OPTS) after $(MAKE) overrides the Makefile's
CFLAGS and LDFLAGS. Some of these flags are required, however. So
instead pass these things in the environment, which allows the Makefile
to append to the flags.
This removes the need for the patch, because now the correct -I options
are added.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The following changes LDFLAGS from -static to --static if building
with BR2_PREFER_STATIC_LIB so that various components actually build
statically.
Libtool interpret -static as linking statically with libraries that will not
be installed to the libdir; you have to pass it -all-static to force static
linking. Or, pass --static, which libtool passes on blindly to gcc. gcc
and (GNU) ld both interpret --static the same as -static (although this
isn't documented).
Signed-off-by: Andy Kennedy <andy.kennedy@adtran.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit adds a package for infozip, compression and file
packaging/archive utility.
[Peter: fix trailing spaces in help, long line]
Signed-off-by: Jan Pedersen <jp@jp-embedded.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The Eclipse plugin at
https://github.com/mbats/eclipse-buildroot-toolchain-plugin allows
users of Eclipse to easily use the toolchain available in
Buildroot. To do so, this plugin reads
~/.buildroot-eclipse.toolchains, which contains the list of Buildroot
toolchains available on the system, and then offer those toolchains to
compile Eclipse projects.
In order to interface with this plugin, this commit adds an option
that allows the user to tell whether (s)he wants the Buildroot project
toolchain to be visible under this Eclipse plugin. It simply adds a
line in this ~/.buildroot-eclipse.toolchains file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Several projects use the kernel style O=<dir> syntax to build out of tree,
and atleast uClibc doesn't check that it was explictly passed on the command
line, so setting it in the environment breaks the build.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Support scripts (in support/) may need to parse the .config file, so give
them an easy access to it, by exporting BUILDROOT_CONFIG with the fully-
qualified path to .config.
Also, post-build scripts may need to reference a few locations, so export
those, too.
Note: we export both O and BASE_DIR. Although they are the same, BASE_DIR
is used internally, while O is used on the command line, which makes it a
bit ambiguous to know which to use. As users use O= on the command line,
they will probably tend to use that in their post-build scripts.
Update doc accordingly.
[Peter: fixed typo]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Patch initially written by Thomas Petazzoni, then reworked and updated
by Laurent Gonzalez, and finally cleaned up by Thomas again.
[Peter: generic-package, deps, download, rename to qwt, move under Qt]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add host-lzop dependency.
Use $(TARGET_MAKE_ENV) when calling $(MAKE)
to able to use binaries built for host.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
dvbsnoop is a DVB/MPEG stream analyzer. It's designed to debug, dump or
view the digital stream info available via
satellite -> DVB-S, DVB-S2
cable -> DVB-C, DVB-C2
terrestrial -> DVB-T, DVB-T2
dvbsnoop can be used on any digital settopbox that running on linux and
provides the DVB APIv3. It's also usable on classical PCs that contains
a DVB hardware (PCI Card or USB Plug).
[Peter: needs largefile, fix help text]
Signed-off-by: Carsten Schoenert <c.schoenert@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When the dvb-apps utilities are selected, the license is clearly a
mix of GPLv2, GPLv2+ and LGPLv2.1+; this, in addition to the initial
unknown license for the transponders data.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
GNU SASL is an implementation of the Simple Authentication and Security
Layer framework and a few common SASL mechanisms. SASL is used by network
servers (e.g., IMAP, SMTP) to request authentication from clients, and in
clients to authenticate against servers.
libgsasl will be used in future versions of libesmtp.
[Peter: Misc minor fixes]
Signed-off-by: Sagaert Johan <sagaert.johan@skynet.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#5846
The $(dir ...) function leaves a slash at the end, so that the LINUX_SITE
variable for a custom tarball ends in a slash. The DOWNLOAD macro adds
another slash between SITE and SOURCE, which results in a double slash in
the download URL.
Fix this by stripping off the final slash from the _SITE in all packages that
have a custom tarball.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Directfb patch no longer needed.
[Peter: Add options for script/xml backends, support for Xrender backend]
Signed-off-by: Sagaert Johan <sagaert.johan@skynet.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The version in xvkbd patch file name doesn't patch the version of the
package, so use the new convention that consists in not having the
package version in the patch file names.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
xvkbd was integrated has an autotools package, but it does not have a
./configure script. And to avoid executing the ./configure, the
xvkbd-2.8-makefile.patch was creating a dummy .stamp_configured stamp
file... Ugly.
So, make xvkbd a normal generic package, with BUILD_CMDS and
INSTALL_TARGET_CMDS, and get rid of the crappy part of the patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
xvkbd is a X.org client application, so there is no reason to depend
on the X.org server. Instead, depend on the X.org client libraries
that xvkbd actually links against.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Metacity is a X client application, so there is no reason to depend on
the X.org server. Instead, depend on the appropriate X libraries.
In addition to the X.org related dependencies, we also add the
host-libxml-parser-perl dependency, otherwise:
checking for XML::Parser... configure: error: XML::Parser perl module is required for intltool
make[1]: *** [/home/test/outputs/xorg/build/metacity-2.25.1/.stamp_configured] Error 1
make: *** [all] Error 2
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
pango is a X client library, so it does not need to depend on the
X.org server. So, we replace the server dependency by dependencies on
the appropriate libraries.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The atk package is used as a dependency in the libglade and libgtk2
packages.
The libglade package has no host variant, and does not depend on
host-atk.
The libgtk2 package depends on atk, and has a host variant, but the
host variant of libgtk2 overrides HOST_LIBGTK2_DEPENDENCIES to limit
the number of dependencies, and host-atk is not amongst those
dependencies.
Therefore, host-atk is useless and can be removed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
ATK is not directly related to X11, and the --with-x, --x-includes,
--x-libraries and --without-x options do not exist.
The --disable-glibtest was duplicated, and is therefore still passed
to the configuration options.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libgtk2 can optionally use a number of features from additional X
extensions, so we add support for those, to ensure that Gtk gets built
after those extensions if they have been enabled in the Buildroot
configuration.
The extensions are Xinerama, Xinput, Xrandr, Xcursor, Xfixes,
Xcomposite and Xdamage.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libgtk2 is a X client library, so it doesn't make sense for it to
depend on the X.org server. Instead, it should depend on the X client
libraries.
This patch therefore replaces the dependency on the X server by a
dependency on libX11, libXext, libXrender and fontconfig, that are the
mandatory requirements to build the X backend of Gtk.
[Peter: don't add an empty line before gtk demo help text]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
fltk is a X client library, so it doesn't make sense for it to depend
on the X.org server. Instead, it depends on libX11, libXext and libXt,
so we use those libraries as fltk dependencies.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
docker is a X client application, so it doesn't make sense to depend
on the X.org server. An inspection of docker Makefile and source code
shows that it only needs the libX11 library, so we replace the X.org
server dependency by a libX11 dependency.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
cairo depends on xlib_libX11 for its Xlib backend. But xlib_libX11
depends on XCB, so the XCB support can always be built into Cairo.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
cairo is a X client library, so there is no reason for it to build
depend on the X.org server. What Cairo needs is the xlib_libX11
library.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Until now, the X.org server was forcefully selecting OpenSSL, just to
have a SHA1 implementation. However, in fact, the X.org server is
capable of using a SHA1 implementation from multiple libraries:
OpenSSL, libgcrypt and libsha1 amongst others.
So, this patch changes the X.org server package so that we use the
SHA1 functions from OpenSSL is OpenSSL is already available, or the
SHA1 functions from libgcrypt is libgcrypt is already available, or if
neither OpenSSL nor libgcrypt are enabled in the configuration, we
select the much smaller libsha1, that has been specifically written to
fulfill the X.org server requirements.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The BR2_PACKAGE_XPROTO_BIGREQSPROTO option was selected by
xlib_libX11, but xlib_libX11 does not have this protocol package in
its DEPENDENCIES. In some builds, it leads to xproto_bigreqsproto to
be built as the last package, with no other package depending on it,
which doesn't make sense.
xproto_xcmiscproto was selected and part of DEPENDENCIES, but an
inspection of libX11 configure.ac and libX11 source code shows that it
does not depend on xcmiscproto at all.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It doesn't make sense for BR2_PACKAGE_XORG7 to globally select
libraries such as libpng, zlib, expat or fontconfig. For example, if
you do a build with just xlib_libX11, then libpng gets built as the
last package, without anybody actually depending on it, even if it was
selected by BR2_PACKAGE_XORG7.
The individual x11r7 packages should select the libraries they need,
and add them in their DEPENDENCIES variable.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some users seem to interpret:
make ctng-menuconfig
as being a value that can be fit for the ct-ng config file.
Clarify that it is a command to run, not a possible value.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This was exposed because I still had an old libethumb in my staging
directory so it was detected by configure, but because of the missing
dependency it was still the (incompatible) version from before the
1.7.4 bump.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The efl libraries depends on BR2_PACKAGE_EFL, so ensure enlightenment
selects it as well, otherwise kconfig complains.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When the Kdrive variant of the X server is selected, the drivers are
directly built into the X server. The X server therefore provides
options to enable or disable certain drivers, especially input
drivers.
This patch adds options to be able to enable or disable the evdev, kbd
and mouse drivers of Kdrive.
[Peter: fix Config.in indentation as pointed out by Arnout]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The BR2_PACKAGE_XSERVER_xorg and BR2_PACKAGE_XSERVER_tinyx options
used to select the style of X.org server to use are not named
consistently with the rest of the Buildroot options (in capital
letters and prefixed with the package name).
Therefore, we rename those options, and we take care to add the old
option names in the BR2_LEGACY infrastructure.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since several years, the TinyX name has been somewhat deprecated in
favor of Kdrive, so mention the "Kdrive" wording in our configuration
interface.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixup the indentation when including the X.org server Config.in to
match all the other inclusions in x11r7/Config.in.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
All X.org server drivers are already enclosed in a if
BR2_PACKAGE_XSERVER_xorg .. endif block. Now that this option is only
set if a X.org server is enabled, there is no need for each individual
driver to depend on BR2_PACKAGE_XSERVER_XORG.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The selection between "modular" server and "Kdrive" server really
belongs as a sub-option of the X.org server itself, rather than as a
global x11r7 option. So we move it under the X.org server option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The $(wildcard ) doesn't work for LINUX_APPEND_DTB, because the .dtb
doesn't exist yet at that point.
Also factor the common part out.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
For sftp support in Dropbear or as an alternative for the built in
sftp support in openssh (or to use standalone).
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
elfutils contains a call to wmempcpy, which is only available when the
toolchain has wchar support, so add the dependency.
Also display a comment if the toolchain dependencies are not met.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We finally have all the pieces needed to allow the build of elfutils
on uClibc. Only the libraries can be built, the programs remain
available only for glibc/eglibc toolchains.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Building the po/ directory complains that the scripts in there have
been generated with gettext 0.17, while we use gettext 0.18 in
Buildroot. Since we don't care that much about po files anyway, just
disable the build of this directory.
Heavily based from work done by Stefan Fröberg, but with many further
modifications by Thomas Petazzoni.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The fts_*() functions are optional in uClibc, and not compiled in our
default configuration. The best option would be to migrate this
elfutils code to the nftw family of functions, but it requires quite
some work.
So we have several options here:
*) Enable fts_*() functions in our default uClibc configuration. Not
nice since only one package needs them (the help text of uClibc
for fts_*() functions explicitly mention that they have been added
to be able to build elfutils).
*) Use gnulib, but it is quite heavy to setup, requires modifications
to configure.ac, and other things.
*) Copy the fts function from uClibc into elfutils source code. This
is the solution used below. uClibc is LGPL, and elfutils is
LGPL/GPL, so there should not be any licensing issue.
Of course, the fts_*() functions are only built if they are not
already provided by the C library.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
elfutils is annoying: it needs gettext even if locale support is
disabled...
Heavily based from work done by Stefan Fröberg, but with many further
modifications by Thomas Petazzoni.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
elfutils uses some strange internal alias of memcpy in glibc, so
workaround this when building with uClibc.
Heavily based from work done by Stefan Fröberg, but with many further
modifications by Thomas Petazzoni.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
elfutils uses the argp family of functions, that isn't available in
uClibc. So, we add a dependency on argp-standalone if building with
uClibc, and modify elfutils source code to link against argp if
needed.
Heavily based from work done by Stefan Fröberg, but with many further
modifications by Thomas Petazzoni.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Even though argp-standalone is built as a static library, it might get
linked in a shared library, so we must built it as
position-independent code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
perf is only available since kernel 2.6.31, so if we can't find
tools/perf/Makefile, error out and tell the user about this.
perf without libelf can only be built since kernel 3.7, so error out
and tell the user about this if he's trying to build perf from a < 3.7
kernel without libelf.
Unfortunately, those tests can only be build-time checks as we either
need to know the real kernel version (i.e, using LINUX_VERSION would
not be correct as it can be a Git commit ID, or Git tag), or have
access to the kernel sources themselves. So we can't prevent those
invalid situations at the configuration, we can only nicely tell the
user at build time.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Now that libelf is available thanks to elfutils (for glibc only),
allow to build perf against it if available.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch adds a new package that allows to build the 'perf'
userspace tool that comes in the tools/perf directory of the kernel
sources.
It is an alternative proposal to the one done by Kaiwan Billimoria
<kaiwan.billimoria@gmail.com>, in that it creates the package in
package/perf/. It therefore properly integrates with the Buildroot
package infrastructure.
Of course, the package depends on the Linux kernel to be built by
Buildroot, in order to get Perf sources matching the version of the
kernel that will be executed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add and use a --{enable,disable}-progs configuration option to
selectively enable or disable the elfutils programs. Generally, on an
embedded system, the libraries are more useful than the programs, and
being able to not build the programs will make it easier to build the
elfutils libraries on uClibc.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch adds a a package for elfutils. For now, the package is
glibc specific, as adding uClibc support for this package is quite
tedious, and will therefore be done through followup patches.
Heavily based from work done by Stefan Fröberg, but with many further
modifications by Thomas Petazzoni.
Signed-off-by: Stefan Fröberg <stefan.froberg@petroprogram.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
After the modification of the <pkg>_PATCH semantic, let's update the
documentation accordingly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
With this commit, we extend the behaviour of the <pkg>_PATCH variable
so that it now allows to list several patches to be downloaded and
applied, and no longer just one patch.
This will be useful for the elfutils package, and should anyway not
break the existing behaviour for packages using just one patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Introducing a package to install pre-built binaries for the bootloader and
the GPU firmware for the RaspberryPi board.
[Peter: rename to rpi-firmware, add link to http://elinux.org/RPiconfig]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Introducing a package to build the userland part of the Raspberry,
needed by anyone who would want to build a rootfs for a RaspberryPi.
[Peter: fixup Config.in (rename, move, arm dep, comment, white space)]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Previously, dvb-apps was a 'blind' package that would install
only the transponders data files for use by external packages
(namely tvheadend).
Now, we add an option to also install the DVB utilities.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Passwords can be encoded in different ways (from the weakest
to the strongest): des, md5, sha-256, sha-512
Add a choice entry to select the method, defaulting to 'md5'.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In case one is using a custom skeleton, the root pasword might already be
set in this case, and should not be overriden.
Just ask for (and set) the root password only for the default skeleton.
Reported-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
sam-ba is a pre-built binary tool built for x86 Linux, so on x86-64,
it requires the 32 bits compatibility libraries to be installed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
All supported pre-built external toolchains are built for x86 Linux,
so we add the BR2_HOSTARCH_NEEDS_IA32_LIBS select.
[Peter: microblaze toolchains are 64bit]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Many users trying to use external toolchains on x86-64 machines get a
very confusing message:
"Can't execute cross-compiler"
They get this message because they forgot to install the 32 bits
compatibility libraries that are needed to run binaries compiled for
x86 on x86-64 machines.
Since this is the case for both external toolchains and certain
binary-only tools like SAM-BA, we add a new Kconfig option
BR2_HOSTARCH_NEEDS_IA32_LIBS, that packages must select if they need
the 32 bits compatibility libraries. When this option is enabled,
dependencies.sh checks that the 32 bits dynamic library loader is
present on the system, and if not, it stops and shows an error.
The path and name of the 32 bits dynamic loader is hardcoded because
it is very unlikely to change, as it would break the ABI for all
binaries.
Also, it is worth noting that the check will be done even if we're
running on a 32 bits machine. This is harmless, as 32 bits machines
necessarily have the 32 bits dynamic loader installed, so the error
will never show up in this case.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The pre-build external toolchains are all built for x86, so they are
only available if the build machine is a x86 or x86-64 machine.
[Peter: microblaze toolchains are 64bit]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When using the crosstool-ng toolchain option, the libc libraries were not
installed to target. Buildroot calls the show-tuple function to determine
the directory to copy from, and it seems that outputs the result to stderr
instead of stdout
Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit 5bd41d165 (pthread-stubs: rename to xlib_libpthread-stubs) renamed
the pthread-stubs package but forgot to update the select statements.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Following Gustavo's removal of two X.org drivers for old hardware
unlikely to be used in embedded contexts, the xorg-release script now
reports those two X.org packages as "to be added": they exist in
X.org, but not in Buildroot.
So, we add a small list, XORG_EXCEPTIONS, in our xorg-release script,
to list the X.org packages we don't want to hear about. Of course,
packages that exist in X.org, and that are not part of this exception
list, and are not packaged in Buildroot are still listed as "to be
added".
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The FFB was an old SBUS video card used in Sun SPARC workstations
from the 90s.
Highly unlikely a target for buildroot.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The CG6 was an old SBUS video card used in Sun SPARC workstations from
the 90s.
Highly unlikely a target for buildroot.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This script generates a report on the packaging status of X.org
releases in Buildroot. It does so by downloading the list of tarballs
that are part of a given X.org release, and compare that with the
packages that are available in Buildroot.
[Peter: drop .py suffix, make executable]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This X.org driver has been removed from upstream X.org releases and is
related to a very specific type of hardware that isn't likely to be used
in a Buildroot context.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This X.org driver has been removed from upstream X.org releases and is
related to a very specific type of hardware that isn't likely to be used
in a Buildroot context.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This X.org driver has been removed from upstream X.org releases and is
related to a very specific type of hardware that isn't likely to be used
in a Buildroot context.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This X.org driver has been removed from upstream X.org releases and is
related to a very specific type of hardware that isn't likely to be used
in a Buildroot context.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This X.org driver has been removed from upstream X.org releases and is
related to a very specific type of hardware that isn't likely to be used
in a Buildroot context.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This X.org driver has been removed from upstream X.org releases and is
related to a very specific type of hardware that isn't likely to be used
in a Buildroot context.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This X.org driver has been removed from upstream X.org releases and is
related to a very specific type of hardware that isn't likely to be used
in a Buildroot context.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This X.org driver has been removed from upstream X.org releases and is
related to a very specific type of hardware that isn't likely to be used
in a Buildroot context.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This X.org driver has been removed from upstream X.org releases and is
related to a very specific type of hardware that isn't likely to be used
in a Buildroot context.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This X.org driver has been removed from upstream X.org releases and is
related to a very specific type of hardware that isn't likely to be used
in a Buildroot context.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This X.org driver has been removed from upstream X.org releases and is
related to a very specific type of hardware that isn't likely to be used
in a Buildroot context.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This X.org driver has been removed from upstream X.org releases and is
related to a very specific type of hardware that isn't likely to be used
in a Buildroot context.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This X.org driver has been removed from upstream X.org releases and is
related to a very specific type of hardware that isn't likely to be used
in a Buildroot context.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This X.org driver has been removed from upstream X.org releases and is
related to a very specific type of hardware that isn't likely to be used
in a Buildroot context.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This X.org driver has been removed from upstream X.org releases and is
related to a very specific type of hardware that isn't likely to be used
in a Buildroot context.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This X.org driver has been removed from upstream X.org releases and is
related to a very specific type of hardware that isn't likely to be used
in a Buildroot context.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In upstream X.org releases, pthread-stubs is named libpthread-stubs,
so for consistency reasons, we rename the Buildroot package
accordingly. Also, while we're at it, we add a xlib_ prefix to the
package to match other X.org libraries in Buildroot.
The necessary Config.in.legacy code is added to ensure that users
having .config files using the old configuration option name get a
warning.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It may be desirable not to use the alsa sink for playback
even though alsa-lib is installed. So make this a configuration
option. This also takes care of selecting the proper options
for alsa-lib
(BR2_PACKAGE_ALSA_LIB_MIXER and BR2_PACKAGE_ALSA_LIB_PCM).
[Peter: fix indentation]
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Update to the latest maxim.org.za kernel 2.6.38
Lock down headers version, otherwise we were building a toolchain with
3.7 headers for a 2.6.33 kernel - not too wise.
Also the AT91RM9200 is an ARM920T so enable that target.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
For some systems, you don't want to run any getty, so allow the option
to be disabled when the empty string is used.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
There are three firmware files that can be installed, each for
different devices.
For example, the DIB0700 firmware can be used by quite a few DVB
USB sticks based on this chipset (I know of at least two of them).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Reorganise the sub-menus for the linux-firmware package, so it is easier
to add new categories of firmwares to install (coming in a future patch).
Remove the per-chipco sub-menus, as all entries have the chipco name in
its prompt (except for TI, which is added).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We have quite a few packages that are dedicated to providing firmwares
for miscellanous devices. Those package are spread out in the big
"Hradware handling" menu, so are a bit hard to find.
Move all those packages to their own sub-menu:
Package Selection for the target --->
Hardware handling --->
Firmwares --->
[ ] b43-firware
[ ] linux-firmware
[ ] ux500-firmware
Hopefully, this will make it nicer, when new firmware-providing packages
are added in the future (eg. in the pipe: firmware for the RPI GPU).
Fix a typo in the 'b43-firmware' prompt (missing 'm').
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* fix configure.in to take care of the given imlib2-prefix
* disable imlib2 support if imlib2 is not part of the selection
[Peter: imlib2 needs to be built with X support]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add the root-password internal target to the exclusion list.
Fixes failures like:
Getting dependencies for [... 'target-root-passwd' ...]
Error getting dependencies [... 'target-root-passwd' ...]
Which is easily singled out with:
$ make target-root-passwd-show-depends
make[1]: *** No rule to make target `target-root-passwd-show-depends'.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The directory was named xapp_xinput_calibrator, but the .mk file was
named xapp_xinput-calibrator.mk, which isn't consistent. Rename the
directory to xapp_xinput-calibrator to be consistent with the naming
of the .mk file and the other x11r7 directories.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The "unknown" packages mechanism was used to render packages that did
not implement the make <pkg>-show-depends target, i.e the packages
that were not yet converted to one of the package infrastructures.
Since now all packages have been converted, we can remove this
"unknown" packages feature.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Until now, graph-depends was calling "make <pkg>-show-depends"
individually for eack package, which was very slow. Now, it calls
"make <pkg1>-show-depends <pkg2>-show-depends ... <pkgN>-show-depends"
for all packages it knows, and then does that recursively. It reduces
the number of make invocations to the deepest dependency chain in the
current configuration, instead of having a number of make invocations
equal to the number of enabled packages.
For a configuration with xvkbd enabled (which brings a significant
number of X.org dependencies) and a tar root filesystem, the time to
execute graph-depends was:
real 5m14.944s
user 4m53.590s
sys 0m14.069s
After our optimizations, it is now:
real 0m33.096s
user 0m30.878s
sys 0m1.472s
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In preparation for more graph-depends improvements, use a
TARGET_EXCEPTIONS list to list all the targets that should be ignored
while building the dependency graph.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When doing a full graph of the dependencies, graph-depends starts by
doing a "make show-targets", which lists all the packages registered
in the $(TARGETS) variable. This variable contains all packages that
are enabled according to the .config file. Then, for each of those
packages, we used to create a "all" -> "package" dependency, even if
in fact most of some packages are already dependencies of other
packages. This creates a needlessly complex dependency graph.
This patch modifies graph-depends so that it filters out the unneeded
"all" -> "package" dependencies when "package" is already the
dependency of another package.
For example, if you have a configuration with libpng (which selects
zlib), "make show-targets" displays "libpng zlib", so graph-depends
used to create the following dependencies: (all -> libpng, all ->
zlib, libpng -> zlib). However, the (all -> zlib) dependency is not
really needed, as zlib is already the dependency of libpng. Those
dependencies are now filtered out.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add it to the dependencies when it's available.
But disable crywrap when it's a nommu system since it uses fork()
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Switch to generic V8 optimization for gcc since we dropped the explicit
supersparc one and works just the same.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Drop the old Sun-specific variants used in old workstations (pre-1997)
and other useless ones.
The V7 ISA is a very old cpu only used in the first Sun workstations,
the toolchain support is broken: the cpu doesn't do hardware div and
it's not handled elsewhere.
The sparclite is also a very old Fujitsu cpu only used in early 90s Sun
machines (includes f930 & f934).
The sparclet (tsc701) was a microcontroller-variant.
The supersparc and hypersparc are just V8 variants also used in old Sun
workstations/servers.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Status of the patches:
* valgrind-compiler-check.patch, no longer needed, merged upstream.
* valgrind-dont-include-a-out-header.patch, kept, just refreshed
* valgrind-fix-ccache-support.patch, adapted to the newer Valgrind
release.
* valgrind-largefile.patch, kept, just refreshed
* valgrind-more-ioctls.patch, removed. Most of it was merged
upstream. This patch was anyway a feature addition, so it shouldn't
be kept in Buildroot.
* valgrind-workaround-SIGSEGV-on-PPC.patch, kept as is, just
refreshed.
This bump also fixes the build failure we were experiencing with
Valgrind 3.7.0 against recent Glibc versions.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* add patch adding src/bin/lttng-sessiond/lttng-ust-error.h which is
missing in the lttng-tools-2.1.0 release tarball.
* update the sync_file_range patch.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Also remove lttng-libust-uclibc-sed_getcpu.patch because it got merged
upstream.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As we're using the sources from the Mercurial repository, and Buildroot
does support retrieving from a Mercurial repository, there is no need
to try (and fail1) getting the archive from the Mercurial built-in
tarball mechanism.
(Note: I was beaten by this because I had a cached copy locally, left
after the previous tvheadend-vampirises-files-from-toher-packages attempt,
that I forgot to delete before testing. Ouch...)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add an option in the menuconfig to specify a root password.
If set to empty, no root password is created; otherwise, the password is
encrypted using MD5 (MD5 is not the default for crypt(3), DES-56 is, but
MD5 is widely available, not-so-strong, but not-so-weak either).
Add a check for 'mkpasswd' as a new dependency.
[Peter: fix typo/capitilization and simplify logic]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump to use kernel 3.7.1
Switch to hard float toolchain with NEON and VFP support.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
librsvg doesn't *require* Gtk, it can optionally build a Gtk theme
engine, but it is not mandatory. Therefore, we make the Gtk dependency
an optional dependency rather than a hard dependency. This will be
useful as librsvg will become a dependency of libevas-generic-loaders,
used in an EFL context in which building libgtk is not really what we
want.
However, gdk-pixbuf is a mandatory dependency to build librsvg, so we
add this one.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The libevas configure script actually checks the presence of libX11
and libXext, so use those two libraries as the dependencies for the
X11 backend of libevas.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The SVG support requires esvg, which hasn't been released yet. The
recommandation of the EFL developers is to use the SVG loader from the
evas-generic-loaders project.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The libecore-ecore_exe-fix-build-with-glibc-2-16 patch is no longer
needed, since it has been merged upstream.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Creating a symbolic link for the download directory is really not a
useful suggestion, since we have the much better solution of the
BUILDROOT_DL_DIR environment variable. So emphasize this solution
instead, and remove the suggestion of the symbolic link.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The development files for zlib or netpbm are not needed, and neither
is python-xcbgen. None of these are present in the chroot used in the
autobuilders, and anyway if those would be needed, it would be a
Buildroot bug and not something to be mentionned in the documentation.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit adds a new section
Working with Buildroot
-> Details in configuration
-> Cross-compilation toolchain
that gives a lot of details about our three toolchain backends. It
takes some elements that were previously later in the manual in
"Embedded basics" and in "External toolchain" and combines them with
more details about internal backend and Crosstool-NG backend.
The "Embedded basics" section becomes empty and is therefore
removed. A few elements have been lost in the process, but they were
considered to not be really useful, especially located so far in the
manual.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As discussed with Samuel Martin, there are a few questions about some
Buildroot configuration aspects that come very often on the IRC
channel and on the mailing-list. Topics such as the /dev management
and init systems are often raised.
Therefore, this patch adds a new section that provides details about
the Buildroot configuration possibilities. It does not aim at
replacing the help text of each configuration option, but rather to
complement them by providing more background. Having those
informations in the manual will also make it easier for us to point
newcomers to the right place in the documentation when they have
questions.
Note that this section will replace the "Embedded basics" section that
comes way too late in the manual. This is done in a followup commit.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Newer versions of binutils (2.22+) default to --no-copy-dt-needed hence
all the used libraries must be explicitly named.
This is accounted for in the source configure script but not in the
compiled form so we just need to autoreconf it.
[Peter: add comment why autoconf is needed]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
BR2_PACKAGE_LIBPLAYER_MPLAYER should not select BR2_PACKAGE_MPLAYER
without having the 'depends on' that BR2_PACKAGE_MPLAYER has.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We just need the transponders data, so we just install those.
[Peter: rework install step]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes the following build problem with recent toolchains:
In file included from exclude.c:31:0:
./stdio.h:1012:1: error: 'gets' undeclared here (not in a function)
CC hard-locale.o
make[4]: *** [exclude.o] Error 1
make[4]: *** Waiting for unfinished jobs....
In file included from stdio-safer.h:20:0,
from freopen-safer.c:22:
./stdio.h:1012:1: error: 'gets' undeclared here (not in a function)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since we moved to gnutls 3.x series which doesn't use libgcrypt we need
to pull it in as a dependency to avoid build breakage.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Now that we've moved to gnutls 3.x which no longer uses libgcrypt we
need to pull it in as a dependency for ntfs-3g encrypted volume support
to avoid build breakage.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
wpa_supplicant isn't API compatible with gnutls3 so remove support.
It's probably hardly used since openssl is far more common, and
wpa_supplicant can use its internal routines if it's not available.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
hostapd isn't API compatible with gnutls3 so remove support.
It's probably hardly used since openssl is far more common, and hostapd
can use its internal routines if it's not available.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
keyutils builds on neither avr32, nor microblaze (probably because
the toolchains used for those archictectures are way too old), with:
..../microblazeel-unknown-linux-gnu-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE
-D_FILE_OFFSET_BITS=64 -I. -DPKGBUILD="\"2012-12-27\"" -DPKGVERSION="\"keyutils-1.5.5\""
-DAPIVERSION="\"libkeyutils-1.4\"" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE
-D_FILE_OFFSET_BITS=64 -pipe -Os -g -Wall -Werror -UNO_GLIBC_KEYERR -o keyutils.o -c keyutils.c
cc1: warnings being treated as errors
key.dns_resolver.c: In function 'main':
key.dns_resolver.c:690: warning: dereferencing type-punned pointer will break strict-aliasing rules
Fixing with -fno-strict-aliasing only partially solves the issue for these
two archs, since the C library does not export the resolver symbols so the
link fails down the road...
- on microblaze, glibc-2.3.6 is tool old and does not set these symbols
as GLOBALs;
- on avr32, uClibc does not have these symbols.
It is much more easy to just disable keyutils for avr32 and microblaze.
Fixes both (avr2, microblaze):
http://autobuild.buildroot.net/results/aa86f6a68f5d0ea4914ab259ed270615bc9d6a99/http://autobuild.buildroot.net/results/70ae127a6e353fd5c64c0c3b4e19a2e93d54ce52/
Merry X-Mas!
PS. Thanks Richard for the help understanding those issues.
Cc: Richard Braun <rbraun@sceen.net>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes a security vulnerability in the BDF implementation.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Make gnutls work for non-wchar toolchains.
It's just a matter of throwing a helping hand to configure.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The testsuite uses fork() hence fails on !MMU targets.
We don't use/install these so just get rid of them.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The ffmpeg configure script tries to autodetermine ARM optimizations by
building a small code snippet with AS.
If AS allows higher-level (>generic) assembly instructions then it
passes and enables the relevant optimization path.
Some toolchains allow/default to more than generic asm and then fail
when the real code is built.
Fixes:
http://autobuild.buildroot.net/results/b6e1225a07a58cc7544e37bc55675be71e2b5088/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Update the version of glibc to be used, since older versions are
broken with the currently-used binutils versions.
Fixes build issues ending with:
tmpfs/ccvkz3ro.s:33: Error: CFI instruction used without
previous .cfi_startproc
This new version does not have RPC support, so update the Config.in.
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
.dtb files are now generated in arch/$ARCH/boot/dts instead of
arch/$ARCH/boot, so extend the LINUX_INSTALL_DTB rule to look there
as well.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Only qstrip once and add a KERNEL_DTBS helper variable to simplify the dtb
rules.
No functional change.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Disable libcap programs since they use fork and fail on !MMU systems.
They're not usually used, if someone wants them they can add an option.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
There is no reason for a client program like pcmanfm to depend on the
X.org server. Instead, it should depend on the appropriate X
client libraries, in this case libX11.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes:
/home/test/outputs/allpkg/host/opt/ext-toolchain/bin/../lib/gcc/arm-linux-gnueabihf/4.7.3/../../../../arm-linux-gnueabihf/bin/ld: fm-desktop.o: undefined reference to symbol 'XSendEvent'
/home/test/outputs/allpkg/host/opt/ext-toolchain/bin/../lib/gcc/arm-linux-gnueabihf/4.7.3/../../../../arm-linux-gnueabihf/bin/ld: note: 'XSendEvent' is defined in DSO /home/test/outputs/allpkg/host/usr/arm-buildroot-linux-gnueabi/sysroot/usr/lib/libX11.so.6 so try adding it to the linker command line
/home/test/outputs/allpkg/host/usr/arm-buildroot-linux-gnueabi/sysroot/usr/lib/libX11.so.6: could not read symbols: Invalid operation
collect2: error: ld returned 1 exit status
make[4]: *** [pcmanfm] Error 1
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The gstreamer-1.0 plug-ins require this version for ORC
acceleration.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
matchbox-desktop uses dlopen(), so it needs to link against libdl. The
configure.ac and Makefile.am have the necessary provisions to do so,
but the included configure script does not replace LIBADD_DL in
src/Makefile.am as it should.
Therefore, we force the autoreconf of the package, which solves the
problem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
xstroke is just a tarball on the avr32linux.org site, the 0.6 version
has been released in April 2004, so we can consider the upstream to be
dead. So let's mark this package as deprecated.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The allyespackageconfig builds have trigerred a link issue on
xstroke. In fact, xstroke must be linked against Xrender, Xext and dl
in addition to the other libraries it was already be linked
against. We fix that by adding a patch that modifies configure.ac and
Makefile.am, and enabling autoreconf for this package.
In addition, since xstroke uses directly Xrender and Xext, we add
those dependencies to the package. In practice, it doesn't change
anything, since some of the xstroke dependencies were already pulling
those libraries, but as xstroke uses directly Xrender and Xext, it
makes sense to have them as dependencies as well.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If GLib is cross-compiled, the default printf settings that it selects are wrong
for glibc. This leads to issues with the g_print() functions, e.g. "Aborted"
errors returned by gst-inspect.
This patch fixes this issue by setting printf configuration options compatible
with glibc. These options should also be compatible with uClibc.
This solution has been suggested for LTIB by Rogerio Nunes:
https://community.freescale.com/thread/302734
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The configure script sets LD_LIBRARY_PATH to the staging directory,
which makes the `ls` that is called in one of the tests fail. Fix by
not setting LD_LIBRARY_PATH when cross-compiling.
The patch has been sent upstream.
Also remove the BDB_LIB variable: it isn't used.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
'make source' fails because the host-jpeg-source target doesn't exist
anymore. Fix this by adding this target explicitly.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As it is, the libseccomp code explicitly checks for x86 (32- or 64-bit),
so it can't work on other architectures.
Reported-by: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Although there are more recent versions of CEGUI, we are stuck
with 0.6.2b for use by spice.
[Peter: add C++ dependency]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
VDE is an ethernet compliant virtual network that can be
spawned over a set of physical computer over the Internet.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Turns out that, with a little bit of tweaking, we can use
the autotools-package infrastructure to build QEMU.
That's better than defining all the _CMDS and using the
generic-package infra.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Francois Perrad <fperrad@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This fix is needed for the 64bits build because Netatalk will assume the library
are stored in [..]/lib64/ instead of [..]/lib/
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Such as
http://autobuild.buildroot.net/results/2ca1d135269a67201e6b4d995ce8fbe94db1ed3f
The mozilla build system passes all of the different ways of CFLAGS
(OPTIMIZER, XCFLAGS, OS_CFLAGS) even when building host tools
(nsintall).
The best way around this without patching libnss is just building the
host tools first without any CFLAGS and then going on with the rest.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The API generation script in mesa3d requires libxml2 to be built with
debug, because it uses the lsCountNode function which is only available
in debug mode.
Note that this is the second "temporary" hack to make mesa3d work.
See http://lists.busybox.net/pipermail/buildroot/2012-November/061936.html
for possible more fundamental solutions.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This package allows to download the Broadcom Wifi drivers, extract the
firmware from them, and install them in /lib/firmware, so that they
can be used by the open-source kernel driver b43.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
b43-fwcutter is an open-source tool (BSD-2c) that extracts the
firmwares from the Broadcom proprietary drivers. Those firmwares can
then be used by the open-source b43 and b43-legacy drivers of the
Linux kernel.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The sconeserver configure script uses Magick++-config to obtain compiler and
linker arguments for the imagemagick libraries. This doesn't work in
Buildroot, and causes build failures such as the following
http://autobuild.buildroot.net/results/7833edd60bbb2c291aea1efb5ccf407da7f4a51f/build-end.log
The upstream sconeserver code has been changed to use pkg-config directly,
instead of Magick++-config; this patch adapts the sconeserver package to
the upstream change.
Both this patch and the associated upstream change are based on a Buildroot
patch submitted by Samuel Martin: http://patchwork.ozlabs.org/patch/200901/
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
After discussion with Perl-Cross's author (Alex Suykov)
Note: Using -A with variables that aren't option lists makes little sense.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This option is useful for cases where the terminal isn't a bare serial
vt100, but e.g. a linux tty with more features.
Signed-off-by: Richard Braun <rbraun@sceen.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
WebKit 1.2.7 does not build with Bison 2.6, but Bison 2.6 is our
host-bison, so if the build machine has bison 2.6, or if by chance it
gets built before webkit, then the build fails with errors such as:
http://autobuild.buildroot.org/results/0b7cfbebd4388cabfa243b5ef74e3b6316fd9fd9/build-end.log
(the real error is not visible due to the overwhelming number of
warnings).
So, we add a patch that modifies WebKit to make it compatible with
Bison 2.6 (patch taken from upstream), and we also add 'host-bison' to
the WebKit dependencies, so that we are sure that a well-known version
of bison is used.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Building webkit with a recent gcc versions gives gazillions of
warnings such as 'warning: cast from 'WTF::AlignedBufferChar* {aka
char*}' to 'JSC::Identifier*' increases required alignment of target
type [-Wcast-align]'.
Those make the webkit build very noise, and hard to debug, so let's
silence those warnings.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
util-linux-2.20.1-sscanf-no-ms-as.patch has a version in its name, and
therefore the other patch, unversioned,
util-linux-uclibc-build-fix.patch, never gets applied.
Fix this by renaming util-linux-2.20.1-sscanf-no-ms-as.patch to
util-linux-sscanf-no-ms-as.patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As reported by Johan Sagaert in the mailing list, if it's building with
a uClibc toolchain with locale enabled the build fails since the new
gettext does a locale hack for glibc which isn't needed nor supported.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes http://autobuild.buildroot.net/results/5963d35b8933c452b8574c964e407c23a5d0412f
The microblaze toolchain has sys/inotify.h, but doesn't provide inotify_rm_*
functions, so disable inotify support.
Also disable the legacy dnotify support (which is used when inotify support
is disabled) as it has bitrotten upstream and no longer builds.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The Qt configure option for specifying a custom qconfig.h
file changed from -config to -qconfig. This makes the
corresponding change in qt.mk.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump QEMU to 1.2.1.
Note: 1.3.0 is out now, but ./configure has changed a bit, and there are
new dependencies, so the bump to 1.3.0 is postponed for a litle while...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Francois Perrad <fperrad@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
'host-*' packages should depends on other 'host-*' packages,
not on target packages.
Reported-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Francois Perrad <fperrad@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
With the upcoming introduction of qemu-on-target, we need to properly
separate the variables used for the host qemu, from the variables
used for the target qemu.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Francois Perrad <fperrad@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Introduce a virtual 'jpeg' package, which pulls in either libjpeg or
jpeg-turbo depending on a choice selection.
Rename jpeg package to libjpeg so we can reuse 'jpeg' for the virtual
package, making the change transparent to existing users and all the
packages using libjpeg.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The uboot-tools.mk has a copy of BUSYBOX_UNINSTALL_TARGET_CMDS
in it, presumably due to a copy/paste error. This definition
is overriding the (identical) definition in busybox.mk.
Also, add license info.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In order to fix some other build problem of libhid, we'll need to do
modifications to the configure.ac. Therefore, let's first convert the
current patch on configure to a patch on configure.ac, and mark the
package as AUTORECONF=YES.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Many configure scripts support an option like --disable-doc, --disable-docs
or --disable-documentation. Pass all of these to configure.
In addition, not all Xorg packages accept the --disable-xxx. Instead they
look for xmlto and/or fop and build documentation if they exist. For host
packages, this may lead to build errors because /usr/bin/xmlto uses libxml2
and we set LD_LIBRARY_PATH to point to $(HOST_DIR)/lib, which may contain
a libxml2 as well. So it's essential to disable xmlto for host packages.
Also some whitespace cleanup.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
OpenSSL's assembly optimizations por PowerPC seem to be broken for at
least 4xx cores.
Thanks go to Jan Schunke for reporting and testing.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The longcalls option allows calls across a greater range of addresses.
This option may degrade both code size and performance, but
the linker can generally optimize away the unnecessary overhead
when a call ends up within range
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Downloads.sourceforge.net doesn't like the double '/'.
Reported-by: Viallard Anthony <viallard@syscom-instruments.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Danomi Manchego <danomimanchego123 at gmail.com>
We really only need the host build of libglib2 for a few helper
programs that are used for the target build of libglib2. Therefore,
trying to use bells and whistles like DTrace, GCov and SystemTap is
totally useless.
And it is actually harmful, since it is causing build failures on the
gcc110 PowerPC-based autobuilder that apparently has some
DTrace-feature installed. This commit therefore fixes:
http://autobuild.buildroot.org/results/1c62d1ce10937bd21f5afcb73782b939d10c2038/build-end.log
Which has been polluting our autobuilder logs since several weeks now.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Update the arm processor types: add the cortex A5 & A15 variants.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Update the powerpc processor types.
Remove the 801, it's the original IBM experimental implementation.
Add the 464, 464fp, 476 and 476fp cores.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The rt-tests package extensively use threads, so this package should
only be available if the toolchain has thread support.
[Peter: add comment when not available]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since we have deprecated the capability of building a toolchain for
the target, it makes sense to also deprecate ccache for the target.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Move the git reference directly to git-ls-remote rather than
piping the output to grep, to help avoid reporting partial
matches rather than the actual requested reference. Also,
add quotes to protest "test" from failing when multiple
strings are reported.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This bumps the GCC version from 4.4.6 to 4.6.3 to for
*.config-eglibc
*.config-glibc
*.config-uClibc
be equal to the default GCC setting in buildroot as well in addition to
commit b855154ee8.
Signed-off-by: Carsten Schoenert <c.schoenert@t-online.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The legal-info target (and possibly others as well) depends on
<pkg>-extract to make sure the license file is available. However,
when <PKG>_OVERRIDE_SRCDIR is active, the <pkg>-extract target
doesn't exist.
To solve this, we add <pkg>-extract which depends on <pkg>-rsync.
While we're at it, we do the same for <pkg>-patch. That avoids the
same problem in the future if something starts depending on
<pkg>-patch.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
There is a check for OVERRIDE_SRCDIR in pkg-generic.mk that is
supposed to produce a warning when OVERRIDE_SRCDIR is active.
This does not work and instead the whole make terminates with
an error message.
This patch changes the check for active OVERRIDE_SRCDIR so that
it works as expected.
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Netatalk need host-pkgconf, otherwise the configure script is complaining.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Requires java, javac and jar on the build machine, similar to how we
require gcc/g++.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
classpath: fixup
When openSSL is selected, cURL is configured to use it.
But in this case, the libcurl.pc file /forgets/ to require link
against -ldl.
This can happen, for example, when BR2_PREFER_STATIC_LIB is not set,
but an executable wants to be linked statically (for various reasons
which are irrelevant here).
Fix that by appending a 'Requires: openssl' line to libcurl.pc.in,
but only if openSSL is enabled.
As suggested by Arnout, do it in a post-patch hook, rather as a
post-install hook.
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If this is not done then pkg-config can get confused.
Thomas and Arnout really deserve the credit for this - I just did
the testing.
Signed-off-by: Charles Manning <cdhmanning@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Toolchain Linaro 2012_09 and possibly other glibc based ones
rely on the existence of nsswitch.conf. If it's missing names
from /etc/hosts are not resolved and thus "localhost" is not
known.
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Pulseaudio selects libtool, so get rid of the deprecated annotation so
people don't get warnings about unmet dependencies when exiting menuconfig.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some git versions (e.g. 1.7.0) do not treat trying to shallow clone
a non existing branch or tag as a fatal error but report a warning
and clone HEAD instead. Thus the fallback mechanism does not work
in this case.
This patch introduces a check for the presence of the requested
version as a branch or tag before trying the shallow clone. It
also removes the need to do two clones when a sha1 is given as
a packege version.
[Peter: use cut -f2-]
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
TuioServer.cpp uses usleep but did not include <unistd.h>. This
patch adds the missing #include. This issue has been reported
upstream.
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The legacy BR2_PACKAGE_* options in Config.in.legacy are not supposed to
be user selectable, so {rand,allyes}packageconfig shouldn't enable them.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The libsigc++ developer documentation was being copied onto the target.
Add a clean-up to fix that.
Signed-off-by: Charles Manning <cdhmanning@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Whatever the gdbserver source, as long as it's installed on the target,
assume it requires libthread_db.
Signed-off-by: Richard Braun <rbraun@sceen.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
perlcross seems to set the installation paths differently than perl's
Configure, so adapt the reference to these paths in cpanminus.
[Francois: install into /usr/lib/perl]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It's still broken, but is someone wants to try it out then at least
the dependency is there.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Configure -A symbol=val generates a extra space in config.sh,
which causes failure like this :
Building Module-Runtime-0.013
Unknown OS type ' linux' - using default settings
[Arnout: use -A define:foo instead of patching config.sh]
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
configure had to be called twice because with --mode=cross the
miniperl-step failed. However, just leaving out the --mode parameter
is sufficient to make it work. Since GNU_TARGET_NAME is always
different from the host's tuple (it has -buildroot- in it), we can
safely assume that the configure script will automatically enter
cross mode.
Also fix a type in perladmin definition.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As suggested by Dan Pattison at ethertek ca.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Now we are using perlcross, the patches to make perl work with qemu are
redundant, so remove them.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We select BR2_PACKAGE_EVTEST automatically. This has only limited use:
when the LEGACY_CHECK menu is disabled in menuconfig (or even oldconfig),
it will also unselect BR2_PACKAGE_EVTEST again. Still, it can serve as a
hint of how to fix things.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As discussed in the BR developer days, we want to be more strict about API
changes in buildroot. I.e., we want to make it less likely that a user's
customizations break down after upgrading buildroot.
A first step is to make sure that the user is warned about API changes.
This patch introduces Makefile.legacy and Config.in.legacy, which will
issue clear error messages for such situations.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The flex binary uses fork() so it breaks on !MMU builds.
Since we usually don't require flex in the target and the common
scenario is that we just want libfl in staging reverse the options so
that BR2_PACKAGE_FLEX just builds and install libfl.a and change the
LIBFL option to BR2_PACKAGE_FLEX_BINARY to install the binary in the
target.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The /var/www directory is listed in /etc/passwd in the skeleton target
filesystem as the home directory of the www-data user (uid 33).
In the final target filesystem, /var/www should be owned by www-data. This
is important for the lighttpd package, for example.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: license is GPLv2+ as pointed out by Arnout]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Also fix directfb build avoiding the following error to occur
(since FCEF_FOLLOW has been added in linux-fusion-8.9.0):
libtool: compile: /opt/br/output/host/usr/bin/ccache /opt/br/output/host/usr/bin/arm-buildroot-linux-uclibcgnueabi-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../include -I../../lib -I../../include -I../../lib -DDATADIR=\"/usr/share/directfb-1.4.17\" -DMODULEDIR=\"/usr/lib/directfb-1.4-6\" -D_REENTRANT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O3 -ffast-math -pipe -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -Os -g2 -g3 -fno-inline -Wno-inline -D_GNU_SOURCE -finstrument-functions -std=gnu99 -Werror-implicit-function-declaration -MT call.lo -MD -MP -MF .deps/call.Tpo -c call.c -fPIC -DPIC -o .libs/call.o
call.c: In function 'fusion_call_execute3':
call.c:311:66: error 'FCEF_FOLLOW' undeclared (first use in this function)
call.c:311:66: note: each undeclared identifier is reported only once for each function it appears in
call.c: In function 'fusion_world_flush_calls':
call.c:444:54: error 'FCEF_FOLLOW' undeclared (first use in this function)
make[5]: *** [call.lo] Error 1
make[5]: Leaving directory `/opt/br/output/build/directfb-1.4.17/lib/fusion'
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Simon Dawson <spdawson@gmail.com>
Tested-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The plugin registry can take a while to be generated when GStreamer is
initialized. Turning it off can speed up up GStreamer application launch
times. Default behaviour is unchanged.
Signed-off-by: Tim Sheridan <tim.sheridan@imgtec.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Changing it to Filesystem and flash utilities gives far better navigation
for mtd utils.
Signed-off-by: Charles Manning <cdhmanning@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch is no longer necessary since strace-v4.5.15 which always
defines CTL_PROC. Specifically strace git commit
35a55785ea8ff44d214af52085e3a5ea624730aa.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When building gdb for the host, we properly pass the PATH (through
HOST_CONFIGURE_OPTS) during the configure step, but we forget to do so
for the compilation step.
The result of this is that when the Crosstool-NG backend is used, gawk
is built and installed in $(HOST_DIR), as a dependency of the
crosstool-ng package.
Then, the host gdb configure script detects this gawk binary
($(HOST_DIR) is in the PATH), and assumes gawk is
available. Unfortunately, during the compilation step, it fails to
find the expected gawk binary, because $(HOST_DIR) is no longer in the
PATH. This causes the following build failure:
http://autobuild.buildroot.org/results/067d0c2ea01673ba98ec11de2426f1ab92dac800/build-end.log
In order to fix this, we simply call the compilation step of gdb for
the host with $(HOST_MAKE_ENV), as it should have been done from the
beginning.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The libpcap package contained some interesting attempts to support a
static-only build, but it was not working:
http://autobuild.buildroot.org/results/01038d3b970092d894d2bae80679247e65722785/build-end.log
In fact the configure.in of libpcap has provision to support
--enable-shared/--disable-shared, but the generated configure script
in the libpcap package has not been regenerated with the configure.in
changes.
So basically, enabling LIBPCAP_AUTORECONF=YES ensures that the
configure script gets generated, which brings us a working
--enable-shared / --disable-shared.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
On ARM, Linaro external toolchains are only visible if the user
selects Cortex-A8 or Cortex-A9. Therefore, we add a comment that tells
the user that the Linaro toolchains are only available under those
conditions.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The depends-on-vs-select part of the manual really deserves its own
section title (especially because it is referred to and the xref gets
a 'sinpara' in PDF if the section doesn't have a title). So restructure
the surrounding sections to reduce the section nesting depth.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The tutorial for autotools-package and cmake-package currently gives
the bad example of setting _INSTALL_TARGET to YES, which is the default.
So change this into an example with _INSTALL_TARGET = NO, and explain in
which case this is relevant.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Various consistency and correctness improvements.
Also removing some sentences that are not or no longer relevant.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Newer kernels had a slight change in the random number API so the OCF
patchset requires a slight tweak to build and run properly.
Affected kernels are, per series:
>=3.0.41, >=3.2.29, >=3.4.9, >=3.5.2 and any newer version.
The fix is applied by detecting the API change rather than guessing the
kernel version.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The autobuilders are falling over building lcdproc, with failures like the
following.
http://autobuild.buildroot.net/results/622b7da10be751c725ba25eb40102269790b4b03/build-end.log
As Thomas Petazzoni has pointed out, the compile command lines incorrectly
contain host header and library search paths, such as the following.
-I/home/peko/scratch/host/usr/include/freetype2
-L/home/peko/scratch/host/usr/lib -lfreetype
This patch changes the lcdproc package to pass the freetype installation
prefixes on the configure command line.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
A /dev/console node must be present in rootfs when the Linux kernel
boots otherwise the kernel will print the following warning:
"Warning: unable to open an initial console"
This is because when we use an initramfs the /dev directory is not
populated at this point. This can cause problems when a program
(e.g ldso with early debugging enabled) opens a standard file
descriptor for read/write before these descriptors are actually
created by the init process later on.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fix build breakage, use the version of the ptrace header file in asm
instead of sys. Also, fix GDB running on 64 bit hosts. GDB was using
unsigned long for 32-bit registers, but unsigned long is 64 bit on
64-bit hosts.
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Except for architecture and processor names, buildroot uses capitalized
configuration names, so change the macro names for xtensa to follow that
standard.
Change the overlay file to have a subdirectory for each component
(gdb, binutils, gcc, etc.) to make it more future-prove.
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Busybox does partial linking of its modules before linking everything
together into the binary. Those partial links are done without the
standard libraries, but that also means -ltirpc can't be found. In
addition, this probably fails horribly with static linking (untested).
The problem is that the LDFLAGS are also used in the partial links.
So instead, use CFLAGS_busybox, which is only used for the busybox
link step. Also make sure that this is passed through the environment,
not on the command line, so the busybox Makefile can still append to
it.
Fixes e.g.
http://autobuild.buildroot.net/results/e8351e3ba86fdcdb2999548658271a6fde0526a9
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
mesa3d now generates some C files at build time (related to the OpenGL
API) from XML files. This generation process is done using Python
scripts that require the libxml2 Python module.
Patch based on the initial work of Will Wagner (Thanks Will).
Signed-off-by: Vellemans Noel <noel.vellemans@visionbms.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Patch based on the initial work of Will Wagner (Thanks Will).
libxml2 host library with python support is required to build mesa3d (7.10.1)
Signed-off-by: Vellemans Noel <noel.vellemans@visionbms.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit 3c90f75496 made Python use a
special ./configure command in order to avoid --enable-shared
--disable-static being passed, because it was causing issues when
building certain modules for a 64 bits system.
However, not having a shared libpython2.7 library for the host
prevents the libxml2 Python binding to get built.
So instead, we use the default configure command, but we add
--enable-static which is needed for Python to build correctly.
Note that we tested the build of Python on a 64 bits host as well as
the build of Python for a 64 bits target, and both went fine, with all
modules built properly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
(Possibly) fixes#5354
The lua shared library patch was creating the shared library with
-nostdlib -lgcc for some unknown reason, which most likely is
the reason for the link issue reported in #5354.
Fix it by dropping these arguments, so gcc gets to figure out itself
what dependencies are needed.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Using severals post build scripts is usefull to share
script between severals boards/projects.
[Peter: fix trailing spaces in Config.in]
Signed-off-by: Philippe Reynes <philippe.reynes@sagemcom.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
A very common mistake done by our users is that they use
output/target/ directory as their root filesystem. Even though this is
loudly documented in our Buildroot manual, people don't read
documentation, so it is not sufficient.
This patch adds a text file named
output/target/THIS_IS_NOT_YOUR_ROOT_FILESYSTEM which explains why
output/target isn't appropriate to use as the root filesystem. The
process is:
* At the beginning of the build, right after the skeleton has been
copied, support/misc/target-dir-warning.txt is copied to
output/target/THIS_IS_NOT_YOUR_ROOT_FILESYSTEM
* In the filesystem images creation code, this file is removed before
launching fakeroot, and restored right after that, so that this
file is not present in the generated root filesystem images.
Note that the file has not been added to the default skeleton for two
reasons:
* It would have annoying to have in our source tree a file named in
capital letters inside system/skeleton/
* The proposed way works even if the user uses a custom skeleton.
[Peter: fixed typo]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Juha Lumme <juha.lumme@gmail.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
automake, autoconf, libtool and make on the target are basically
useless if we don't support building a toolchain on the target. Of
course, the host variant of automake, autoconf and libtool will remain
available.
[Peter: fixup to apply after perl change]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As discussed during the ELCE 2012 Buildroot Developers Meeting, we no
longer want to support the possibility of building a toolchain for the
target. None of the core developers have any use for this, it has been
known to be broken or cause problems for a long time without anyone
providing fixes for it.
In addition to this, Buildroot is inherently a cross-compilation tool,
so the usage of a native toolchain on the target is not really
useful. Many newcomers are tempted to use this possibility even though
it is clearly not the intended usage of Buildroot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes multiple security isssues, most of them of the server component
though.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
cpanminus is currently responsible for about half of the autobuilder
failures, due to the missing dependency on host-qemu. However, even
with the host-qemu proposed by Arnout, cpanminus will still not work
properly: it will try to execute on the build machine executables
built for the target. While qemu is here to emulate the instruction
set, there is still the unsolved problem of kernel headers version
mismatch between the target and the build environments.
So the whole approach that consists in using host-qemu for building
simply cannot work properly, and until it is solved, the package
should be marked as broken.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Using the internal Buildroot toolchain backend, makeinfo, whom belongs to
the texinfo package, is required to build gcc and gdb.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Remove an lcdproc patch which has been rejected upstream. It has been
decided by lcdproc developer Markus Dolze that the behaviour of the
client_add_key command when handling the minus key is "intentional to
some degree."
This patch also takes the opportunity to remove the version number from the
single remaining lcdproc patch.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
- update "Understanding how to rebuild packages" section
- add "Understanding when a full rebuild is necessary" section
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Consider the second chapter: "starting-up", as a tutorial.
Assuming that, using.txt only contains the very first commands used to get
configure and build its very first target system.
So, the following subsection from using.txt have been to common-usage.txt:
- Offline builds
- Building out-of-tree
- Environment variables
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Split and rephrasing of introduction.txt.
Cross-toolchain explainations moved from introduction.txt into
embedded-basics.txt.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The new skeleton of the manual as it has been thought:
1. About Buildroot:
Presentation of Buildroot
2. Starting up:
Everything to quickly and easily start working with Buildroot
3. Working with Buildroot
Basics to make your work fitting your needs
4. Troubleshooting
5. Going further in Buildroot's innards
Explaination of how buildroot is organised, how it works, etc
6. Developer Guidelines
7. Getting involved
8. Contibuting to Buildroot
9. Legal notice
10. Appendix
It is easy to distinguish two parts in this plan:
- Sections 1 to 4 mainly address people starting with Buildroot
- Sections 5 to 10 are more focused on how to develop Buildroot itself
Most of the existing sections have just been moved in the hierarchy,
few were split and dispatch in, what i think was the relevant section,
and numerous others have been created.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Note that libnfc has also switched from Subversion to Git.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixing linking time error with certain toolchains. The issue caused by a missing explicit linking to
libpthread. The failed buildlog:
Linking CXX executable testgenerictypes_exec
/home/buildroot12git/output/host/usr/lib/gcc/arm-buildroot-linux-uclibcgnueabi/4.6.3/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: /home/buildroot12git/output/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libQtCore.so: undefined reference to symbol 'pthread_cancel'
/home/buildroot12git/output/host/usr/lib/gcc/arm-buildroot-linux-uclibcgnueabi/4.6.3/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: note: 'pthread_cancel' is defined in DSO /home/buildroot12git/output/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/lib/libpthread.so.0 so try adding it to the linker command line
/home/buildroot12git/output/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/lib/libpthread.so.0: could not read symbols: Invalid operation
collect2: ld returned 1 exit status
make[3]: *** [templates/tests/testgenerictypes_exec] Error 1
make[3]: Leaving directory `/home/buildroot12git/output/build/grantlee-0.2.0'
make[2]: *** [templates/tests/CMakeFiles/testgenerictypes_exec.dir/all] Error 2
make[2]: Leaving directory `/home/buildroot12git/output/build/grantlee-0.2.0'
make[1]: *** [all] Error 2
make[1]: Leaving directory `/home/buildroot12git/output/build/grantlee-0.2.0'
make: *** [/home/buildroot12git/output/build/grantlee-0.2.0/.stamp_built] Error
Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Xtensa is a configurable processor architecture, which allows to define
additional instructions and registers. The required variant specific
information for the toolchain is delivered in an 'overlay' file, which
needs to be 'untarred' to the corresponding directories after the
source is installed and patched.
This patch provides support for binutils, gcc, and gdb with a very
limited changes to the build scripts. These additions are only executed
for the Xtensa architecture and have no effect on other architectures.
[Thomas: rebased on top of the 'arch: improve definition of gcc mtune,
mcpu, etc.' patch, and changed 'Target ABI' to 'Target Architecture
Variant'].
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The Xtensa architecture had been removed because it required special
handling and depended on additional directories and files that became
obsolete over time. This change is more aligned to other architectures.
[Thomas: rebased on top of the "arch: improve definition of gcc mtune,
mcpu, etc." patch].
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch has since a long time been merged upstream in uClibc, so it
cannot apply on any of the recent uClibc snapshots.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As suggested by Yann E. Morin, there is a better way than our current
big Config.in.common to define the gcc mtune, mcpu, march,
etc. values. We can split the setting of those values in each
architecture file, which makes a lot more sense.
Therefore, the Config.in file now creates empty kconfig variables
BR2_ARCH, BR2_ENDIAN, BR2_GCC_TARGET_TUNE, BR2_GCC_TARGET_ARCH,
BR2_GCC_TARGET_ABI and BR2_GCC_TARGET_CPU. The values of those
variables are set by the individual Config.in.<arch> files. This is
possible because such files are now only conditionally included
depending on the top-level architecture that has been selected.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since perl no longer requires host-qemu, autoconf and automake work
again on the architectures that are not supported by host-qemu.
This reverts commit c65d92e8e2.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes the following build failure:
extra/checksum.c:16:25: fatal error: netinet/ip6.h: No such file or directory
compilation terminated.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
uClibc doesn't provide NSS support, so we shouldn't try to include nss
related headers or call nss related functions.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libtirpc does not implement the reentrant function getrpcbynumber_r(),
so allow quota to use the non-reentrant version getrpcbynumber(). This
should not be a problem as quota tools are not multi-threaded.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libtirpc does not implement the reentrant function getrpcbynumber_r(),
so allow nfs-utils to use the non-reentrant version
getrpcbynumber(). This should not be a problem as nfs-utils tools are
not multi-threaded.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As we will need to add more patches to nfs-utils, we need a correct
ordering when applying patches. Therefore, reformat the patches to use
a git format and git naming.
The nfs-utils-dont-mix-flags.patch is no longer needed as it was
patching Makefile.in files that were being regenerated due to the
package having _AUTORECONF = YES. The Makefile.in are properly
regenerated thanks to the nfs-utils-0002-Patch-taken-from-Gentoo.patch
patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libtirpc-0005-rpcent-mark-getrpcbyname-name-argument-as-const-char.patch
fixes build failures like
http://autobuild.buildroot.org/results/7a3a751fe02c639ca75c575ca7fe20a72372b8d6/build-end.log.
libtirpc-0006-rpcent-remove-prototypes-of-reentrant-variants.patch
ensures that functions not implemented by libtirpc are not described
in a header file. It also allows to remove those prototypes that were
not matching the functions available in glibc or uClibc, causing
mismatch in prototypes.
libtirpc-0007-doc-Makefile.am-fix-out-of-tree-installation.patch is a
minor fix.
The following patches (8 to 9) allow libtirpc to provide sufficient
things to be able to build rpcbind on top of it.
All these patches have been submitted upstream on the libtirpc-devel@
mailing list.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The patch numbers in [PATCH x/y] are quite useless within the context
of Buildroot, and generate noise when patches are re-ordered.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The ext2 initrd is pretty broken, because it requires an additional
root=/dev/ram0 command line parameter, and a /init to mount
devtmps that isn't there in out ext2 rootfs. So just use a cpio
instead.
Note that there is no check if the kernel supports initramfs or the
selected compression method.
Also removed a bit of dead code in iso9660.mk.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The bluez-utils package does not build for the avr32 architecture; this
results in autobuilder failures such as the following.
http://autobuild.buildroot.net/results/d737d1220d7566289eee802fd580a49d8c456c97/build-end.log
The underlying problem is with the <sys/epoll.h> header provided by the
antiquated avr32 toolchain; this header lacks definitions for
epoll_create1() and EPOLL_CLOEXEC.
This patch disables support for the bluez-utils package on the avr32
architecture.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The perlcross project makes it possible to properly cross-compile
perl. It creates a host-miniperl that is configured for the target
and uses that to cross-compile the perl modules.
Unfortunately there are still a few hacks needed to make it work.
Proper fixes can be developed and upstreamed later.
Since there is no longer a dependency on qemu, it works on all
architectures again.
Also removed some config options:
- BR2_PACKAGE_PERL_CUSTOM_INSTALL just allows a selection of modules;
this can also be encoded by an empty BR2_PACKAGE_PERL_MODULES.
- BR2_PACKAGE_PERL_DB_FILE and BR2_PACKAGE_PERL_GDBM_FILE can be
derived automatically from the package configs.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
xlib_libX11 builds a makekeys executable for the host, but uses the
targets X11_CFLAGS. This leads to build failures like
http://autobuild.buildroot.net/results/411eb3aefea859a7e31986a44acd50b475f174cb/
This problem was introduced by the version bump, because then also
the AUTORECONF was removed so the existing fix didn't work anymore.
As a slightly cleaner solution, just remove X11_CFLAGS from the
Makefile. We know we don't need it, because the X11 stuff is in
$(HOST_DIR)/usr/include which is already in HOST_CFLAGS.
[Peter: reword comments]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The linker script of the at91bootstrap package has to be modified when
built from gcc-4.6.x version. Indeed a section named text.startup is
created and has to be added into the text section.
Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Give the path to the realdelf binary for the target, similar to how we
do for the other tools.
[Peter: reworded]
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This release contains many improvements bug fixes, and major new features and
support for float point numbers and support for multi-telegram communication...
[Peter: also drop autoreconf]
Signed-off-by: Sagaert Johan <sagaert.johan@skynet.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The board boot more fast with a zImage than a uImage
as the kernel will not have to be relocated during the decompression.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Recent mails on the list show that it is not very clear how to create
an initial RAM fs with buildroot. So make this more explicit in the
cpio and initramfs help texts. Hopefully this will reduce the /init
debugging we have to do.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Contrary to what was written in samba.mk, the sys-quotas option
apparently does not depend on RPC support in the toolchain: Samba
builds perfectly fine on an uClibc toolchain without RPC support with
sys-quotas enabled.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Now that we're using full perl (which needs qemu), only make auto{conf,make}
available on the supported archs.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Build error message is:
Error: zlib check failed
Make sure to have the zlib libs and headers installed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Currently packages can be described in two ways: proprietary (tarball not
saved, license not described in further detail), and others (tarball
saved, license described).
Split the logic to allow the license to be always described whether or not
the source code can be redistributed.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Useful to produce extra warnings for packages that have special
licensing-related issues.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The problem has to do with const-correctness. This has been resolved
for various architectures, but not for the generic case.
Signed-off-by: Mischa Jonker <mischa.jonker@synopsys.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
target/Config.in.arch had become too long, and we want to remove the
target/ directory. So let's move it to arch/ and split it this way:
* An initial Config.in that lists the top-level architecture, and
sources the arch-specific Config.in.<arch> files, as well as
Config.in.common (see below)
* One Config.in.<arch> per architecture, listing the CPU families,
ABI choices, etc.
* One Config.in.common that defines the gcc mtune, march, mcpu values
and other hidden options.
[Peter: space->tab fix, mipsel64 little endian, mips3 as noted by Arnout]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This directory groups the following elements:
* the default root filesystem skeleton
* the default device tables
* the Config.in options for system configuration (UART port for
getty, system hostname, etc.)
* the make rules to apply the system configuration options
Even though the skeleton and device tables could have lived in fs/, it
would have been strange to have the UART, system hostname and other
related options into fs/. A new system/ directory makes more sense.
As a consequence, this patch also removes target/Makefile.in, which
has become useless in the process.
[Peter: fixup TARGET_SKELETON settings / documentation to match]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Yann E. MORIN <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Cups uses /usr/lib64 if the HOST has it, no matter if it is cross compiling
for a 32bit arch, breaking the build for stuff looking in /usr/lib.
The fix of commit edd2716c didn't work, it would just force /usr/lib64 if
the target is 64 bit. Instead, force installation in /usr/lib regardless
of the host.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Graphics can be enabled for X11 as well.
Do not select DirectFB for graphics,
set DirectFB or X11 dependencies instead.
Signed-off-by: Valentine Barshak <gvaxon@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Basically, the BR2_TOOLCHAIN_EXTERNAL_GLIBC option no longer
unconditionally selects BR2_TOOLCHAIN_HAS_NATIVE_RPC since there are
glibc toolchains that don't have RPC support. All the predefined
toolchain profiles are updated to take into account this change: for
the moment, all glibc toolchains that have pre-defined toolchains have
RPC support, but further patches in the series add pre-defined glibc
toolchains that don't have RPC support. In the case of custom glibc
toolchains, a question is asked to the user so that he can say whether
the external glibc toolchain has RPC support or not. The validity of
this configuration option is checked by the new
check_glibc_rpc_feature function in helpers.mk.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It is no longer being developed, the FTP is dead, and Debian has
removed it from the distribution.
Also it allows to not worry about adding RPC support through libtirpc
to this package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It is no longer being developed, the FTP is dead, and Debian has
removed it from the distribution.
Also it allows to not worry about adding RPC support through libtirpc
to this package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The BR2_INET_RPC has for a long time been a not very descriptive
configuration option name, and with the advent of non-RPC glibc
toolchains and the apparition of libtirpc, we really need to rename it
to something more sensible, BR2_TOOLCHAIN_HAS_NATIVE_RPC.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since we are some day going to finally rename the badly named common
toolchain options (BR2_USE_WCHAR, BR2_ENABLE_LOCALE, BR2_INET_RPC,
etc.) into something more logical, let's start using the Crosstool-NG
toolchain options in the Crosstool-NG code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of making the Busybox configuration more complicated by trying
to adjust it depending on whether RPC is available or not (which gets
complicated when RPC support can be provided by libtirpc), simplify
things by letting the user enable FEATURE_NFS_MOUNT or not depending
on whether RPC support is available or not.
Our default configuration do not enable FEATURE_NFS_MOUNT, so users
will not face any build problems by default. Only if they explicitly
enable FEATURE_NFS_MOUNT will they have to make sure that the
toolchain has RPC support, or that libtirpc is enabled (support for
this added in a followup patch).
[Peter: remove from CONFIGURE_CMDS as well]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since we are some day going to finally rename the badly named common
toolchain options (BR2_USE_WCHAR, BR2_ENABLE_LOCALE, BR2_INET_RPC,
etc.) into something more logical, let's start using the Buildroot
toolchain options in the uClibc code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libhid uses timerfd, which is not yet available in the uClibc-0.9.31
that we have to rely on for avr32. Since this is pretty much a corner
case, just disable libhid for avr32.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When downloading from git, we clone the whole repository and then only
use the latest commit. That's a lot of redundant stuff. So instead,
make a shallow clone. Unfortunately that's only possible when
downloading a branch or tag, so fall back to the old method if git gives
an error.
This speeds up the cloning of a linux git from more than 2 hours to
20 minutes on a 200KB/s link).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The avr32linux.org mirror has vanished and is replaced by a spam site
that returns HTML pages for whatever URL you request from it. So the
download helper thinks that download has succeeded, while actually it
failed.
Fortunately, there is still a mirror of the site alive, so we can use
that one.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When an external toolchain without thread debug is used, the gdb
package can be selected, but no version can be choosen, since none
match any of the requirements. This leads Buildroot to try to build
gdb for the target without a version being defined, as in the
following build log:
http://autobuild.buildroot.org/results/84e8fd2df0cc22448052a572c2e9a6e03dd137eb/build-end.log
To fix this, we adjust the dependencies of the BR2_PACKAGE_GDB option
so that the package as a whole is not selectable when the required
conditions are not met. Basically, we have the choice of:
* Having a toolchain that supports thread debugging, which is needed
for gdb >= 7.x
* Having BR2_DEPRECATED enabled, which allows gdb 6.8 to be selected,
which doesn't require thread debugging
* Using bfin, since this architectures has a special old gdb version
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The busybox web server isn't providing the same binary name / cmdline
arguments as the "big" webservers, so they aren't equivalent.
As discussed on the dev day, don't hide them when _SHOW_OTHERS isn't
enabled.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes http://autobuild.buildroot.net/results/b2f28621bc9d6048057c406048b3f7d665cef165
ipnetns.c contains a replacement setns implementation, which is used
if the toolchain doesn't provide any (HAVE_SETNS not set).
We don't have any knowledge of toolchain setns support on buildroot
level, but the (handwritten) configure script contains a test for it,
so run the configure script before building.
The configure script isn't written for cross compilation, so it needs
to be massaged slightly to use the cross compiler / flags.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes security issues:
- CVE-2012-3524: Don't access environment variables (fd.o #52202)
Thanks to work and input from Colin Walters, Simon McVittie,
Geoffrey Thomas, and others.
- Be more careful about monotonic time vs. real time, fixing
DBUS_COOKIE_SHA1 spec-compliance (fd.o #48580, David Zeuthen)
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The patch that was included in buildroot was not the same as the final
one submitted in the mainline.
Signed-off-by: Alexandre Belloni <alexandre.belloni@piout.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The u-boot patch got mainlined but not exactly as it was submitted to
buildroot. Update the at91bootstrap to match what is in the mainline.
Signed-off-by: Alexandre Belloni <alexandre.belloni@piout.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Note that this configuration doesn't build entirely: the user must
manually run "make busybox-menuconfig" and disable the "Mount NFS
filesystems" option, because the toolchain does not have RPC support.
This issue will be fixed once the support for toolchain without RPC
will be integrated.
[Peter: fix readme typo]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The boot wrapper contains both a minimal bootloader and a tool to
generate an image suitable for execution by the AArch64 software
simulator. The image generated embeds the minimal bootloader, the
kernel image, the Device Tree Blob and the kernel command line.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The architecture tuple is 'aarch64', but the kernel people decided to
call it 'arm64', so we have to do some mungling to get the kernel
architecture name from the Buildroot architecture name.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Our internal toolchain backend does not yet have support for AArch64,
and Crosstool-NG also does not have support for AArch64 at the moment
(though it should be coming quickly since the Linaro AArch64 toolchain
is generated with a modified Crosstool-NG version).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch fixes the autobuilder bug that shows up during the
libmbus build.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
strace fails to build on x86_64 because stat64 is not available. This
is because the automatic detection of stat64 in configure is overridden
by buildroot, by setting ac_cv_type_stat64. Just remove that override -
current strace seems to detect it correctly for non-largefile platforms.
Build-tested on x86_64 (with largefile), ARM (with and without largefile),
sh4, MIPS and ppc-32 (no largefile).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Remove host-pkg-config in favour of host-pkgconf.
Also remove the sysroot support patch since it's only intended for the
host variant.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
pkgconf is a drop-in replacement for pkg-config that doesn't need
itself to build and just requires a C89 compiler.
Instead of using a patch for hardcoded sysroot support (as the patch to
pkg-config does) we rely instead on a wrapper script that takes the
appropiate action.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
binutils version 2.23 is only available in .gz format, the older versions are in .bz2 format.
Signed-off-by: Sagaert Johan <sagaert.johan@skynet.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Defaulting to UTC (which is what uClibc will default to when /etc/TZ is
missing) seems more sensible than US Mountain Time Zone in the default
rootfs skeleton.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Problem was found when compiling libplayer with GStreamer support
on x86_64 with a Sourcery toolchain.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Implementation of an interface connecting TUIO messages and QT events
https://github.com/x29a/qTUIO
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
build-tested with a minimal internal toolchain for ARM.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: drop uneeded configure args, full install to target]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This fixes the "Unknown parameter for tags/attrs" build error.
Backported from commit 88e08c43d0200a4b06a298b7d2541965eebc0afe
[PATCH] 2011-04-17 Thierry Reding
<thierry.reding@avionic-design.de>
Reviewed by Adam Barth.
Fix build with GCC 4.6.
* dom/make_names.pl: Execute preprocessor without the -P option. The
preprocessor in GCC 4.6 eats empty lines, effectively breaking the
parsing performed by this script. Dropping the -P option when invoking
the preprocessor keeps the empty lines but as a side-effect also adds
additional linemarkers.
From the cpp manpage:
-P Inhibit generation of linemarkers in the output from the
preprocessor. This might be useful when running the preprocessor
on something that is not C code, and will be sent to a program
which might be confused by the linemarkers.
The linemarkers are not problematic, however, because the script
properly handles them by ignoring all lines starting with a #.
Signed-off-by: Valentine Barshak <gvaxon@gmail.com>
Tested-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
ld-linux*.so may not be present in lib/ directory, it could be
in lib32 and/or lib64 only. But check_glibc reports
"Incorrect selection of the C library" in this case, which is
not true.
Fixed by extending the search to SYSROOT/*/*.
Signed-off-by: Jean-Mickael Guerin <jean-mickael.guerin@6wind.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Host-only package that don't define their <PKG>_SOURCE variable would
default to host-<pkg>-<version>.tar.gz. It's more logical to remove
the host- prefix in this case.
This problem is most apparent with host-only packages downloaded from
version control, because they never define <PKG>_SOURCE.
Reported by Thomas Petazzoni and initial analysis by Luca Ceresoli.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The decode-tm6000 utility cannot build without the libv4l2util. If
this library is not available, the build breaks with:
decode_tm6000.o: In function `read_stream':
decode_tm6000.c:(.text+0x220): undefined reference to `v4l2_rcvbuf'
decode_tm6000.o: In function `main':
decode_tm6000.c:(.text+0x37c): undefined reference to `v4l2_open'
decode_tm6000.c:(.text+0x3cc): undefined reference to `v4l2_gettryset_fmt_cap'
decode_tm6000.c:(.text+0x424): undefined reference to `v4l2_getset_freq'
decode_tm6000.c:(.text+0x47c): undefined reference to `v4l2_mmap_bufs'
decode_tm6000.c:(.text+0x4a0): undefined reference to `v4l2_start_streaming'
See
http://autobuild.buildroot.org/results/207ed74d5e816309ef0dc82ecc8112b51788fdf6/build-end.log
We fix this by adding util/libv4l2util to the list of directories to
build when decode-tm6000 is enabled. The only other user of
libv4l2util is another utility called qv4l2, for which Buildroot has
no Config.in option, so we only handle the case of decode-tm6000 at
the moment.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In libv4l.mk, if there are multiple elements in $(LIBV4L_DIRS_y), they
are built in order, one after the other. However, our loop construct
doesn't take into account the fact that we should error out if one of
the steps failed.
A good illustration is having BR2_PACKAGE_LIBV4L_DECODE_TM6000 and
BR2_PACKAGE_LIBV4L_V4L2_CTL enabled. The build of decode-tm6000 will
fail, but the build will happily continue without stopping in libv4l.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Even though the MMX instructions are available on x86_64 processors,
the MMX code in sdl_gfx is written in IA32-specific assembly code, and
therefore does not build on x86_64. It generates the following build
issues:
SDL_imageFilter.c: Assembler messages:
SDL_imageFilter.c:34: Error: `pusha' is not supported in 64-bit mode
SDL_imageFilter.c:38: Error: `popa' is not supported in 64-bit mode
SDL_imageFilter.c:77: Error: `pusha' is not supported in 64-bit mode
SDL_imageFilter.c:93: Error: `popa' is not supported in 64-bit mode
[...]
We fix this by only enabling MMX support in this package when the
processor supports MMX *and* it is a IA32 compatible processor.
Fixes
http://autobuild.buildroot.org/results/b9efc611f5da487079b6be37bb7a41a3198d63b9/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The largefile patch is no longer necessary, it has been merged
upstream. However, in order to make the build work properly with
Thumb2 toolchains (such as Linaro toolchains), an additional fix is
needed. This fix is already upstream and will be part of upcoming
Xenomai releases.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Due to the conflicts with default Berkeley DB configuration, disable
database support in linux-pam: pam_userdb is not built.
Signed-off-by: Dmitry <golubovsky@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
On gentoo systems SCons setup.py tries to install into
$(HOST_DIR)/usr/lib64 but SCons looks up for its stuff in
$(HOST_DIR)/usr/lib instead hence breaking.
Make it install into $(HOST_DIR)/usr/lib by force to avoid the issue, it
shouldn't matter on other distributions.
Version bumping doesn't fix it.
[Peter: wrapped long line]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes http://autobuild.buildroot.net/results/c55e4c9741109c66f8f66ab7e3f4f1664826056a
mtd appends to CFLAGS/CPPFLAGS, but doesn't use override - So we need
to pass flags in the environment and not on the make command line to
get the combination of our flags and mtd's.
At the same time cleanup the host build to use a similar form
(HOST_CONFIGURE_OPTS) as target build.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Now that the lfs handling issues have been worked around, we can
pass TARGET_CONFIGURE_OPTS on the make command line to ensure
TARGET_CFLAGS are used.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes http://autobuild.buildroot.net/results/4602f7cf4407a2969a04267bbc5d276b076a7c91
The preload libraries needs to wrap both the lfs and !lfs variants, so
ensure the lfs versions are not transparently used (as they are when
_LARGEFILE_SOURCE / _FILE_OFFSET_BITS=64 are defined).
This used to work by accident before, as our custom CFLAGS (containing those
defines) wasn't used.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Test suite for Linux framebuffer.
[Peter: add patch to build with our TARGET_CFLAGS]
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The configure script checks for C++ support as telnet (but not telnetd)
contains C++ code. This used to work by accident if the host had g++,
as we didn't pass TARGET_CONFIGURE_OPTS to configure (which sets CXX to
/bin/false).
Fix it by removing the g++ check and rewriting the configure checks to
use the C compiler instead.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Backport some lcdproc patches from upstream, to fix the following issues.
* Incorrect parsing of minus key in handler for client_add_key command
* Segfault in handler for menu_add_item command
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This sets paths to ifconfig, route, netstat and ip
in the target root filesystem.
Otherwise the paths leak from the host and may not
match those on the target.
Signed-off-by: Valentine Barshak <gvaxon@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The sylpheed headers are installed to $(DESTDIR)$(includedir),
while DESTDIR is $(TARGET_DIR) and includedir is set to
$(STAGING_DIR)/usr/include in the SYLPHEED_CONF_OPT.
Thus, the full staging directory path is created in the
target root filesystem, which is wrong.
The includedir was set to staging include because sylpheed
incorrectly adds includedir to its include path, and does
not cross-compile with the default includedir set to
/usr/include.
This removes includedir setting and also removes it from
include paths in Makefiles to prevent using host headers
from /usr/include. The same approach is used in the OE.
Signed-off-by: Valentine Barshak <gvaxon@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Netatalk goes to version 3.0.
The startup script has changed too, there is now only one binary called
netatalk. No more afpd, cnid, ... at startup ! They are executed by netatalk.
All the config is done within /etc/afp.conf, look at :
http://netatalk.sourceforge.net/3.0/htmldocs/upgrade.html
for more info about the upgrade process.
[Peter: added --without-kerberos to disable kerberos detection]
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
echo -e is not a portable way to do this, better use printf.
Works with MacOS X.
Signed-off-by: Waldemar Brodkorb <mail@waldemar-brodkorb.de>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This sets paths to dvdread-config and dvdnav-config,
and configuration options to enable external libdvdread
and libdvdnav support.
Signed-off-by: Valentine Barshak <gvaxon@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This fixes path prefix in the staging dvdnav-config
and removes dvdnav-config from the target filesystem
if BR2_HAVE_DEVFILES is not set.
Signed-off-by: Valentine Barshak <gvaxon@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This fixes path prefix in the staging dvdread-config
and removes dvdread-config from the target filesystem
if BR2_HAVE_DEVFILES is not set.
Signed-off-by: Valentine Barshak <gvaxon@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The pkgconfig files are located in /usr/lib/pkgconfig
and /usr/share/pkgconfig directories.
However, only /usr/lib/pkgconfig is removed when no
development files are needed in the target filesystem.
Remove pkgconfig directory from $(TARGET_DIR)/usr/share
as well if BR2_HAVE_DEVFILES is not set.
Signed-off-by: Valentine Barshak <gvaxon@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When compiling for the same architecture and libc as the host,
GNU_TARGET_NAME and GNU_HOST_NAME are equal. configure scripts use
these to detect cross-compilation, and will decide that we're doing
native compilation. This may trigger running of executables,
which fail because of missing libraries in the host environment.
To solve this, set the vendor part in GNU_TARGET_NAME to buildroot.
This problem exists for instance in xserver_xorg-server on x86_64.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Notice that you need u-boot >= 2012.04 to be able to boot kernel >= 3.2,
because older u-boots keep the l2 cache enabled, see u-boot commit
679530278 (arm, arm-kirkwood: disable l2c before linux boot) for details.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
x11vnc CAN be built without XTEST support, but it isn't very useful as
noted by the warning printed by configure when it isn't found:
*** A working build environment for the XTEST extension was not found ***
(libXtst). An x11vnc built this way will be *ONLY BARELY USABLE*.
You will be able to move the mouse but not click or type. There can
also be deadlocks if an application grabs the X server.
It is recommended that you install the necessary development packages
for XTEST (perhaps it is named something like libxtst-dev) and run
configure again.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Record proto is not really required. It can be disabled.
Signed-off-by: Valentine Barshak <gvaxon@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If both the dbus and udev packages are selected, then the configure step
for the xserver_xorg-server package fails as follows.
configure: error: Hotplugging through both libudev and dbus/hal not allowed
The configure script no longer allows both the --enable-config-dbus
and --enable-config-udev options to be specified.
This patch changes the xserver_xorg-server makefile to use udev in preference
to dbus, when both are available.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Update to use the latest kernel 3.5.4.
And also update to the latest .config knobs, otherwise we were just
building a mips(32) target which failed miserably.
This config is still flaky, you get a login prompt but usually fail to
login, passing along an init=/bin/sh helps some but crashes are quite
usual.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: AUTORECONF and --with-keysymdef no longer needed]
Signed-off-by: Allan W. Nielsen <a@awn.dk>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As stated in commit 555c2585bf, the
Xtensa architecture has been introduced in 2009 and never changed
since its initial introduction. It requires some special handling that
is a bit annoying, and despite our call to the initial developers, and
the announcement of the deprecation of the architecture during the
2012.05, nothing has happened. Therefore, drop support for this
architecture.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: me
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
BR2_SPARC_TYPE is a hidden configuration option that is only used for
the configuration of uClibc, therefore, we move it from
target/Config.arch.in to toolchain/uClibc/Config.in.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
BR2_ARM_TYPE is a hidden configuration option that is only used for
the configuration of uClibc, therefore, we move it from
target/Config.arch.in to toolchain/uClibc/Config.in.
We also add a comment that explains that this stuff is only useful for
uClibc <= 0.9.32. Starting from 0.9.33, uClibc build process simply
uses the compiler flags to find the ARM processor that should be
used. So, someday, we'll be able to remove this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some parts of alsa-lib correctly use threads only when available, but
some other parts, especially certain PCM plugins, unconditionally
require threads. While it would certainly be possible to fix alsa-lib
to only use threads when available, it probably doesn't make much
sense, since on an embedded system that has audio, we are probably
powerful enough to enable thread support in the C library.
Fixes:
http://autobuild.buildroot.org/results/e14469be7f6171f4c8c0c09c8e32943819f7938b/build-end.log
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of duplicating the "depends on BR2_PACKAGE_ALSA_LIB", just put
BR2_PACKAGE_ALSA_LIB_PYTHON under the existing condition "if
BR2_PACKAGE_ALSA_LIB".
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In its Config.in, pulseaudio declares a dependency on gettext
using the documented construct:
select BR2_PACKAGE_GETTEXT if BR2_NEEDS_GETTEXT
but in its .mk file, declares a dependency on the package:
PULSEAUDIO_DEPENDENCIES = [...] $(if $(BR2_PACKAGE_GETTEXT),gettext) [...]
instead of the documented:
$(if $(BR2_NEEDS_GETTEXT),gettext)
Fix that.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
CC: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
lshw.mk defines a build-dependency on gettext,
but not in its Config.in.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
CC: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: add license info, build libintl if locales disabled]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
CC: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
From now on, packages only need to select the BR2_PACKAGE_GETTEXT
option and depend on the 'gettext' package to get the necessary i18n
libraries installed on the target.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: remove BR2_PACKAGE_LIBINTL]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
CC: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Now, the gettext package always:
* install everything to the staging directory
* install the libraries to the target directory
Note that this commit removes BR2_PACKAGE_LIBINTL without updating the
packages, it is done in a separate commit to ease the review process.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: keep BR2_PACKAGE_LIBINTL as blind option]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
CC: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump dhcp to version 4.1-ESV-R7 to fix CVE-2012-3955
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The mplayer configure script says that sh4a is not supported,
according to:
http://autobuild.buildroot.org/results/c6457c2dea7c1df4d8e0f23995ebfb3285a85aed/build-end.log
Apparently, sh4 is supported, but not sh4a, even though it seems that
sh4a is a super-set of sh4. So it would probably not be too difficult
to get mplayer to build/work for sh4a, but we don't have hardware to
test this easily, and we can leave this work to the first developer
who will need mplayer on sh4a: let's only support what the upstream
package supports.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
On gcc10, the build of the host-vala documentation causes a
segmentation fault of xsltproc, for some unknown reason. See:
http://autobuild.buildroot.org/results/42fea25ac4fe33a56c02d90c361da1c494f79ba3/build-end.log
Therefore, this patch fixes the problem by:
* Ensuring that host-libxslt is amongst the dependency of vala when
documentation is enabled so that we build a well-known version of
libxslt/xsltproc to build the documentation. If documentation is
not enabled, then we force vala to *not* find xsltproc so that it
doesn't try to use the xsltproc of the build machine distribution
if available.
* Disabling the build of the documentation for host-vala. Note that
we need to pass ':' as the xsltproc binary name to teach the
configure script that xsltproc is not available.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This reverts commit 32f4957b15.
Adding the phony objdir target as a prerequisite of all the .o targets
doesn't work, as they are then always considered out of date, leading
to poco getting rebuilt (without the proper MYSQL_{INC,LIB}DIR settings)
at staging-install / target-install time.
Instead simply use MAKE1 for the build step.
Fixes http://autobuild.buildroot.net/results/1cca8b4115674f12884bcbc0c680efed0fb939ae
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
v2 - license type is GPLv2/BSD-3c as pointed out by Baruch Siach
Signed-off-by: Mark Jackson <mpfj@newflow.co.uk>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
opus + jpegformat plugin builds fail when gstreamer is configured with
--disable-gst-debug as they are checking the GST_DISABLE_DEBUG symbol
instead of GST_DISABLE_GST_DEBUG.
Submitted upstream as https://bugzilla.gnome.org/show_bug.cgi?id=683850
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This update pulls in new ath6k and realtek drivers and updates for
libertas and iwlwifi:
a707c25 Merge branch 'master' of git://dev.laptop.org/users/dsd/linux-firmware
adb6547 rtlwifi/rtl8723e: Add firmware for new driver
4e17394 linux-firmware: ath6k: add firmware for AR6004 hw1.3
bac3567 Marvell SD8787: update to v14.66.9.p96
6a08d14 Marvell SD8686: update to v9.70.20.p0
bbede96 iwlwifi: update firmware for 6205
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This change is to fix the autobuild failure at:
http://autobuild.buildroot.net/results/45e2c08d5e3c868b2d7fdf26a7c5f88de5ff8f61/build-end.log
I can't actually reproduce this bug, because my machine cannot
run the 64-bit microblaze toolchain. However, the log makes
it clear that -fPIC is needed, and grepping for fPIC and fpic
under packages makes it clear that cjson should have used -fPIC
anyway. So even if the bug isn't fixed, it must surely be improved.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Note that the COPYING.LESSER file states that "Parts of the
software are licensed under the MIT (X11) license".
On the 0MQ mailing list, Pieter Hintjens has confirmed that
the code no longer contains any parts that are under the
MIT/X11 license. (The COPYING.LESSER file will be fixed in
a future release.)
Signed-off-by: Simon Dawson <simond@trainfx.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
With the replacement of GENTARGETS by package-generic, there is a risk
that local packages don't work anymore without any indication of what
is wrong. Therefore, generate an error message if the GENTARGETS,
AUTOTARGETS or CMAKETARGETS macro is still used.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
-mno-abicalls is an old kludge for some (probably) old issue.
Remove it since it's actually harmful, static busybox doesn't build with
it for a modern-ish toolchain (defaults as of this commit, uClibc
0.9.33.2 + gcc 4.5.4).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Practically speaking, MIPS has three useful ABIs:
* o32 is for 32-bits CPUs, or 64-bit CPUs running only a 32-bit subset
of the instruction set.
* n32 is for 64-bits CPUs only. It has 32-bits pointers and long
integers.
* n64 is for 64-bits CPUs only. It has 64-bits pointers and long
integers.
See http://www.linux-mips.org/wiki/MIPS_ABI_History and
http://www.linux-mips.org/wiki/WhatsWrongWithO32N32N64 for more
details.
So, this commit reworks the Buildroot MIPS support by:
* Add separate mips64/mips64el top-level architectures.
* Renaming the n32 ABI option to BR2_MIPS_NABI32, for consistency
with BR2_MIPS_OABI32.
* Renaming the n64 ABI option to BR2_MIPS_NABI64, for consistency
with BR2_MIPS_OABI32.
* Make the n32 and n64 ABI selections select the BR2_ARCH_IS_64,
since those ABIs are valid on 64-bits CPUs only.
* Removing the o64 ABI, which is practicaly never used.
* Removing the "none" ABI, which really doesn't make sense.
* Introduce the mips64 and mips64el architecture names when a 64-bits
MIPS ABI is choosen. This will fix build issue like
http://autobuild.buildroot.org/results/9b8c5ea86c953a89e85e7b67e9221de41773f652/build-end.log
where gmp was confused by the fact of having a 32 bits architecture
(detected by the mips- architecture part of the tuple) but 64 bits
integer size when compiling.
* Adjust the uclibc.mk logic to support the new mips64/mips64el
architecture names, and take into account the renaming of the ABI
options.
This has been build tested by generating Buildroot toolchains and
compiling a few packages for MIPS o32, MIPS n32 and MIPS n64.
This work is originally based on prior work done by Gustavo Zacarias.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes warning: (BR2_PACKAGE_COLLECTD_RRDTOOL) selects BR2_PACKAGE_RRDTOOL
which has unmet direct dependencies (BR2_USE_WCHAR).
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
mtdev2tuio is a simple application for converting touch events
to the standart TUIO 1.1 protocol.
https://github.com/olivopaolo/mtdev2tuio
[thomas.petazzoni@free-electrons.com: use TARGET_CONFIGURE_OPTS, fix
indentation, add dependency on thread support in toolchain]
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
liblo is an implementation of the Open Sound Control protocol
for POSIX systems.
http://liblo.sourceforge.net/
[thomas.petazzoni@free-electrons.com: add dependency on thread support
in toolchain]
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that all packages have been converted to use the
downloads.sourceforge.net URLs that automatically selects an available
Sourceforge mirror, we can get rid of the BR2_SOURCEFORGE_MIRROR
configuration variable.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The default <foo>_SITE value that pkg-generic sets when the .mk file
doesn't declare it is using BR2_SOURCEFORGE_MIRROR and therefore isn't
consistent with the usage of downloads.sourceforge.net we have
generalized for all drivers.
Since the downloads.sourceforge.net URLs are inherently specific to
each package, we can no longer provide a default in pkg-generic.mk,
and therefore each package *must* declare its own <foo>_SITE value.
This patch fixes the only two packages that were lacking a <foo>_SITE
value.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The luajit amalgamation compile starts with building a host tool, and then
uses it to build itself. However, when CFLAGS is specified, as opposed to
TARGET_CFLAGS, then it is used for both HOST and TARGET builds. So if you
add something target specific into 'Target Optimizations' (for example,
'-mfpu=neon -mfloat-abi=softfp' for ARM Cortex-A8), then it gets into the
host tool compile, which then fails (because my build machine is not an
ARM Cortext-A8). This can be fixed by using TARGET_CFLAGS and
TARGET_LDFLAGS, instead of CFLAGS and LDFLAGS, respectively.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update to version 1.1 (r34994).
remove --enable-largefiles configure option which was
deleted in r33321.
Discard mplayer-theora-fix.patch which is a backport
of r34498 and r34503.
Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Note that this new package, at91bootstrap3, is being added alongside the
existing at91bootstrap. This was suggested by Thomas Petazzoni, whose
comments on the mailing list are quoted below.
For this package, I am not sure we can do a simple version bump. Since
there is (was?) no upstream for AT91Bootstrap 1.x, many
vendors/companies had to maintain their patches on top of AT91Bootstrap
1.x. See for example
board/calao/usb-a9263/at91bootstrap-1.16-usb-a9263.patch. Therefore,
removing AT91Bootstrap 1.x from the tree will prevent those platforms
to work. I know people should upgrade, but AT91Bootstrap 3.x is quite
significantly different, so the porting effort is not that simple.
Therefore, I'm wondering whether we should kee at91bootstrap as it is,
and create a separate package at91bootstrap3 for the 3.x generation.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
graph-depends calls make to get the list of packages, and the
dependencies of each package.
When called out-of-tree, the Makefile is a wrapper that calls
the real Makefile, so make will spit out a line like:
make -C /path/to/buildroot O=/path/to/build-dir show-targets
which graph-depends wrongly believes is part of the target list.
Be silent when calling make, as we really only want the target
and dependency lists.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[thomas.petazzoni@free-electrons.com:
renamed package to 'gsl' to match upstream name.
added license information.]
Signed-off-by: Sagaert Johan <sagaert.johan@skynet.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
usb_modeswitch_data provides udev rules for usb VID/PID combinations to
switch usb deices from their default mode into a more useable mode. The
default mode usually is a cdrom with installation software that is of
little use in an embedded linux situation
Signed-off-by: J.C. Woltz <jwoltz@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch updates usb_modeswitch to version 1.2.4. The
usb_modeswitch.mk needed to be modified for usb_modeswitch to compile.
Also added extra remove section for the added help scripts and files.
[thomas.petazzoni@free-electrons.com:
bumped further to 1.2.4 instead of 1.2.3, adjusted the patch accordingly
use TARGET_CONFIGURE_OPTS instead of passing CC, LD manually
add license information.]
Signed-off-by: J.C. Woltz <jwoltz@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It is recommended to use the most recent revision from subversion as it
contains various fixes.
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[thomas.petazzoni@free-electrons.com:
Fixup indentation of Config.in file.
Add 'depends on BR2_PACKAGE_PYTHON' so that the package does not
appear when the Python interpreter is not enabled.
Add license files information, but not the license tag: the package
includes software under multiple licenses.]
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[thomas.petazzoni@free-electrons.com:
Fixup indentation in the Config.in file.
Add 'select BR2_PACKAGE_PYTHON_PYEXPAT' which is needed to get XML
support in Python.
Add license information.]
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[thomas.petazzoni@free-electrons.com:
drop the --disable-static from configuration options, the default
behavior should work without problem.
make sure the pre configure hook is also executed for the host
variant of the package.
add the project upstream URL in the package help text
]
Signed-off-by: Stefan Froberg <stefan.froberg@petroprogram.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
cpuload is a simple tool to obtain intuitive vision of CPU load
(including total, user, system, irq and softirq) within a certain
time, which is especially useful for embedded system without GUI.
Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since on some packages we are adding <pkg>_LICENSE but not necessarily
<pkg>_LICENSE_FILES, let's add a separate statistic to track these
informations. This will allow us to improve both the number of
packages covered by <pkg>_LICENSE and <pkg>_LICENSE_FILES.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For alignement reasons, we sometimes add spaces between <pkg>_LICENSE
and the equal sign. Take this into account in pkg-stats.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The sudo executable is installed without the setuid bit set, which prevents
sudo from working.
This patch adds a post-install hook to fix the permissions of the sudo
executable.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In addition to the HTML version, also publish the PDF and Text
versions of our manual.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit ba92d6ef68 made hard float the
default when Cortex-A8 and Cortex-A9. The problem it was trying to fix
is that the newer Linaro toolchains (2012.05 and 2012.06) are
hard-float, so the default selection of soft-float enabled on ARM
doesn't work for those toolchains.
Unfortunately, not selecting soft-float causes problems with
the Crosstool-NG backend at the moment.
As an intermediate solution, make the soft float option disappear when
using external toolchain: the toolchain will decide by itself whether
to generate hard float or soft float code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds support for the ARM-only appended device tree
mechanism present in the kernel.
This option allows to add at the end of the kernel image the
device tree blob so that we can still boot device tree enabled
kernels with old bootloaders.
This patch also adds the needed logic to genereate such an image
when building zImages or uImages, also adding the necessary parts
to rebuild the uImage.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch introduces the BR2_LINUX_KERNEL_UBOOT_IMAGE boolean to
factorize more code that will be shared in the next patches that
introduces other uImage-like targets.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch introduces some support for device tree-enabled kernels.
It replaces the former BR2_LINUX_KERNEL_DTS_FILE option that was
microblaze-only, that was quite limited. This option was quite
limited, first obviously because it was restricted to microblaze,
but also because it targetted only external device tree source files,
and allowed only to build simpleImages using the custom image name
mechanism.
This patch adds a much more generic one, that can work on basically
every architecture that supports device tree. It allows to build
both device tree source file that comes with the kernel source or to
set the path to the device tree file to use so that one can use a
custom device tree.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that most packages have been converted over to package
infrastructures, keep only one column to show the package
infrastructures.
A new column, showing of the package has license information, has been
added. This will help in increasing the number of packages having
license metadata.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of having two separate list of choices for select the target
architecture variant for i386 and x86_64, with many CPU choices
duplicated (because all modern x86 CPUs can be both used as i386 or
x86_64), merge them into a single list. In the x86_64 case, all the
x86 CPUs that do not support the 64 bits instruction set are hidden.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[thomas.petazzoni@free-electrons.com:
- add dependencies on the supported architectures to avoid build
failures on ARM and other unsupported arches
- add a patch that removes an useless warning about the kernel
version. This patch is present upstream. However since it modifies
configure.ac, we need to autoreconf the package.]
Signed-off-by: Will Newton <will.newton@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since we have now two uncompatible init systems, and we want only one of
them at the same time in use in the rootfs, we need to select a
particular init system. This patch also adds $(PKG)_INSTALL_INIT_SYSTEMD
and $(PKG)_INSTALL_INIT_SYSV hooks that are called when the matching
init systems are selected to install properly the init scripts of the
package.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libusb needs thread support, and so do other packages that depend on it.
[thomas.petazzoni@free-electrons.com: adds threads dependency to
libnfc-llp, which selects libnfc.]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
udev rules are not processed for kernel events that occur before
the udev daemon is started. Call udevadm trigger to replay these
missed events.
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Build less after busybox if it's enabled, since we prefer the full-blown
version over the light one if it's enabled (and busybox would overwrite
the link when built afterwards).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that ncurses has been bumped to 5.9, it installs .pc files for
pkg-config, which allows gpsd to find it properly without the need to
specify a custom location for ncurses5-config.
Since gpsd now uses pkg-config to find the ncurses library, we also
add host-pkg-config in the dependencies.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bumping to 5.9 has two nice side-effects:
* It builds fine on noMMU architectures such as Blackfin, which will
fix build failures like
http://autobuild.buildroot.org/results/cf3e6a95c82b60d63da041293db576a8f21f9136/build-end.log.
* It installs a pkg-config file, which will allow gpsd to find
ncurses properly, without the need to use ncurses5-config, which
means we can get rid of one of our gpsd patches. Thanks to Mike
Frysinger for pointing the new --enable-pc-files option.
After this bump, I build tested a large number of the ncurses reverse
dependencies we have in Buildroot, and they all built fine.
Thanks to Gustavo Zacarias for the investigation on why ncurses 5.9
why segfaulting: it turned out to be caused by the
--enable-broken-linker configure option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There was a typo in the name of the variable to register the hook,
which prevent the hook from actually being called.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The BR2_mmix and BR2_arm_dunno configuration options do not exist, so
there is no chance for these values to be useful in any way.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Qt configuration and installation process is a bit strange, and it
leads the .pc files to contain absolute paths to the staging
directory, while it should only contains paths relative to the staging
directory, because pkg-config already adds the path of the sysroot
automatically to the headers and libraries locations.
This allows the 'pkg-config --cflags' results for Qt libraries to be
correct.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Python support is not cross-compile friendly (uses host compiler,
installs in wrong location, etc.) and nobody needs it at the moment,
so leave that to the first person who will need Python support for
gpsd.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
prefix should always be /usr, and destdir must be passed as DESTDIR,
and in the environment, not as a scons argument. Finally, we pass the
sysroot= argument to scons so that it doesn't add -L/usr/lib
parameters when compiling.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes the following build issue with gcc 4.6:
LINK Xfbdev
.../host/opt/ext-toolchain/bin/../lib/gcc/arm-none-linux-gnueabi/4.6.1/../../../../arm-none-linux-gnueabi/bin/ld: ../../../os/.libs/libos.a(backtrace.o): undefined reference to symbol 'dladdr@@GLIBC_2.4'
.../host/opt/ext-toolchain/bin/../lib/gcc/arm-none-linux-gnueabi/4.6.1/../../../../arm-none-linux-gnueabi/bin/ld: note: 'dladdr@@GLIBC_2.4' is defined in DSO .../host/usr/arm-unknown-linux-gnueabi/sysroot/lib/libdl.so.2 so try adding it to the linker command line
.../host/usr/arm-unknown-linux-gnueabi/sysroot/lib/libdl.so.2: could not read symbols: Invalid operation
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It currently fails to build with:
libgpsd_core.c: In function 'gpsd_poll':
libgpsd_core.c:881: error: 'const struct gps_type_t' has no member named 'min_cycle'
libgpsd_core.c:884: error: 'const struct gps_type_t' has no member named 'min_cycle'
and is probably not a very important feature for normal users of gpsd.
The build problem has been reported to the gpsd-users mailing list.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 9ba9bfb9a0 inverted the logic to
define $(2)_SUBDIR, breaking the build of things using the _SUBDIR
feature, like the tcl package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Just like we have AUTOMAKE, AUTOCONF or QT_QMAKE, let the scons
package provide a SCONS variable that points to the scons host binary.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix for CVE-2012-2688 (potential overflow in _php_stream_scandir),
CVE-2012-3365 (SQLite open_basedir bypass) and other misc bugfixes.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
All the defconfig files used by the autobuilders that use
pre-installed external toolchains are making the assumption that the
default for a custom external toolchain is "pre-installed". We keep
this default for now, since changing it breaks the autobuilders.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
HOST_CONFIGURE_OPTS allows to pass the correct CC, CXX, CFLAGS,
CXXFLAGS, etc. For example, it allows the elftosb build process to
properly use ccache when available.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds a new config option BR2_PRIMARY_SITE_ONLY that, when set,
restricts package downloads to the specified BR2_PRIMARY_SITE. If the package
is not present on the primary site, the download fails.
This is useful for project developers who want to ensure that the project can
be built even if the upstream tarball locations disappear.
[thomas.petazzoni@free-electrons.com:
Extend config option help message with more details coming from the
commit log. Added a dependency on the fact that a primary site has
been defined. Without any primary site (the default configuration),
this new option does not make any sense.]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cortex-A8 and Cortex-A9 ARM cores are guaranteed to provide a hardware
floating point unit, so there's no reason to default to software
floating point for them.
More importantly, the newest Linaro toolchains are hard float
toolchains, so basically an user choosing those toolchains and leaving
the default option of software float would run in compilation issues.
So let's make hard float the default for Cortex-A8 and Cortex-A9.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check_glibc function verifies that the C library of the external
toolchain is glibc. To do so, it verified that a file matching
ld-linux*.so.* or ld.so.* was found in the lib/ directory of the
toolchain's sysroot. However, with the Linaro 2012.05 toolchain, the
lib/ directory contains two links named ld-linux-armhf.so.3 and
ld-linux.so.3, which means that the first ld-linux*.so.* wildcard
expression expands to two files, which generates a syntax error for
the "test" program. We replace that with a more elaborate find+wc
combination to determine whether at least one matching file is
present.
The check_arm_abi function verifies the ABI of an ARM toolchain. For
EABI, it tested that the target name ends with eabi. However, with
Linaro 2012.05, the tuple is now arm-linux-gnueabihf (for hard float),
so we have to adjust the logic to accept this additional "hf"
specification in the tuple.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds the possibility to download a custom external
toolchain, in addition to the existing support of preinstalled custom
external toolchains.
With the modified configuration, the user is presented with the
following options:
- Toolchain type: Buildroot toolchain | External toolchain | Ct-ng toolchain
In case of External toolchain:
- Toolchain: the CodeSourcery toolchains | Custom toolchain
- Toolchain origin: Toolchain to be downloaded and installed | Pre-installed toolchain
In case of Toolchain to be downloaded, the user is presented with:
- Toolchain URL
In case of Pre-installed toolchain, the users sees:
- Toolchain Path
For CodeSourcery toolchains, the toolchain URL field is not used (the
URLs are directly coded in ext-tool.mk).
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When using one of the package infrastructures, the DOWNLOAD function
uses $(PKG)_SITE_METHOD to determine the appropriate download method,
which is autodetected based on the URI if none was explicitly set.
When the DOWNLOAD function is called directly, for example when
downloading a toolchain, or from a package that does not use one of
the package infrastructures, the SITE_METHOD is not autodetected,
and thus the download defaults to wget.
This patch adds URI scheme detection directly to the DOWNLOAD method,
in case no SITE_METHOD was detected yet.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The localfiles download method uses $($(PKG)_SITE))) and
$($(PKG)_SOURCE) instead of $(1) and $(2). This means that it can only
be used for package downloads (through gentargets, autotargets, ...)
and not for other downloads like external toolchains.
This patch changes localfiles to allow this, just as the wget and scp
download methods already did.
For the version control download methods, nothing changes.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix the indentation of the external toolchain Config file, where tabs
and spaces are mixed as indentation even within the same block.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
MXS platforms (imx23 and imx28) are relying on bootlets as their first
stage bootloaders, that can then either start a regular second stage
bootloader or directly a Linux kernel. However, the Makefile allows
only to build u-boot and linux images at the same time, which is
not very convenient as we will more likely use only one of them,
so we need to duplicate a bit what is already done so that we are able
to choose what we want to generate.
thomas.petazzoni@free-electrons.com:
* Remove incorrect dependency on BR2_PACKAGE_ELFTOSB
* Each board configuration option is for one board, not multiple
boards, so use singular.
* The i.MX28 support is for i.MX28 EVK only, reflect that in the
option prompt and the option name.
* Use 'generic-package' instead of GENTARGETS
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Elftosb is a Freescale toolset to build binary image files (like U-Boot.sb)
to be used with CPUs imx23, imx28, stp37xx
thomas.petazzoni@free-electrons.com:
* Add -m 0755 when installing binaries
* the _CLEAN_CMDS is not supposed to uninstall things from the
HOST_DIR.
* Use 'host-generic-package' instead of 'GENTARGETS,host'
Signed-off-by: Eric Jarrige <eric.jarrige@armadeus.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[thomas.petazzoni@free-electrons.com:
slightly adjust the installation process to just do a loop of calls
to $(INSTALL).]
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[thomas.petazzoni@free-electrons.com:
add patch that creates a standard setup.py file. This allows the
.pyc files to be generated at build time, and installed into the
target. This is important because by default, Buildroot removes all
.py files from the target, to keep only the .pyc files. The
python-nfc.mk file was changed to use this setup.py standard build
process.]
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Installation of host-lua was failing because it was the first package
to be built, and $(HOST_DIR)/usr/lib didn't exist. Therefore, use
install -D everywhere so that intermediate directories are created as
needed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
gcc 4.6 has become more sensitive about option ordering, especially
libraries. It requires the -l flags to be placed after the object
files that need that library. See for example
http://nick.zoic.org/art/etc/gcc-linker-libs.html. We had -llua at the
beginning of the link command line, causing build issues (here on gcc
4.6 with host-lua).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit ad6af5819f removed the
HOST_LUA_DEPENDENCIES assignement to the empty variable, so from that
commit, the dependencies of host-lua are automatically computed from
the dependencies of lua. Since lua can depend on readline and ncurses,
it means that host-lua can depend on host-readline and host-ncurses,
and the host-readline package does not exist in Buildroot. Since there
is no reason to build host-lua with readline/ncurses support, just
re-add the HOST_LUA_DEPENDENCIES variable.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Francois Perrad <fperrad@gmail.com>
This patch adds the libnfc-llcp package.
This package requires a minium libnfc version of 1.6. A separate patch has
been submitted to bump the libnfc version; that patch should be regarded as
a prerequisite for the present patch.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch bumps the libfreefare package from version 0.3.2 to version 0.3.4.
Version 0.3.4 requires a minium libnfc version of 1.6. A separate patch has
been submitted to bump the libnfc version; that patch should be regarded as
a prerequisite for the present patch.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
bwm-ng can monitor not only network bandwidth but also disk-io
bandwidth, so it is more appropriate to put bwm-ng into System tools.
Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As sam-ba is delivered as a binary for x86
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This will allow to install binary package only if they are supported by the
host. As example Atmel SAM-BA (x86 only).
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The libnfc package is currently at version 1.5.1 in Buildroot. This patch
bumps the version to a recent svn revision, for the following reasons.
* Version 1.5.1 is marked as "unstable" on the libnfc download site.
* The nfc-tools project at
http://code.google.com/p/nfc-tools/
includes a library that extends libnfc with LLCP functionality.
Unfortunately, to build this requires a libnfc version no lower than 1.6.
The version 1.6.0-rc1 Release Candidate does not build; svn commits to fix
the build problems have not yet been back-ported into a Release Candidate.
* The libfreefare package is currently at version 0.3.2 in Buildroot. To bump
this to the most recent version (0.3.4) also requires a libnfc version no
lower than 1.6.
I suggest that this patch be regarded as a temporary fix, pending the release
of libnfc 1.6, which will allow other dependent packages to be progressed in
the interim.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also, as the kernel.org archives are back up, use them as official site
again.
[thomas.petazzoni@free-electrons.com: use BR2_KERNEL_MIRROR]
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
On some architectures (found on x86_64, but probably others too),
libnss builds with -m32 unless it is configured for 64-bit build. So
force 64-bit build on 64-bit architectures.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
On some architectures (found on x86_64, but probably others too),
libnspr builds with -m32 unless it is configured for 64-bit build. So
force 64-bit build on 64-bit architectures.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With the introduction of a specific macro for host targets, it was decided
to also make the names of the macros more intuitive: generic-package,
autotools-package and cmake-package.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Create host-generic-package, host-autotools-package and
host-cmake-package macros. Such a macro is more intuitive to use than
the $(call ...,host) construct. Also it speeds things up by having
one less $(call ...) evaluation.
Also includes documentation update, but not for buildroot.html.
This brings the time for 'make -qp' (which is used by bash-completion)
down from 1.85s to 1.35s on my laptop.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The target package was only present because at the time 'nasm' was
packaged, there was a bug in the package infrastructure that prevented
a package from having a host only variant. This has been fixed since
then, so we can get rid of the useless dummy target package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Users keep falling on this documentation, which is no longer kept
up-to-date with the developments. Get rid of it now.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This allows to automatically collect material that may be needed to comply with
the license of packages that Buildroot prepares for the target device.
The core of the implementation is made by the following parts:
- in package/pkg-utils.mk some helper functions are defined for common actions
such as generating a warning, producing info about a package etc;
- in package/pkg-gentargets.mk, within the GENTARGETS framework, a new
<PKG>-legal-info target produces all the info for a given package;
- Makefile implements the top-level targets:
- legal-info-prepare creates the output directory and produces legal info
about Buildroot itself and the toolchain, which mostly means just warning
the user that this is not implemented;
- legal-info, the only target that is supposed to be used directly, depends
on all of the above and finishes things by producing the README files from
the various pieces.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update Config.in and .mk according to the new features.
Remove the patch handling build with uclibc without long double support,
which seems not necessary anymore.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Selecting the target subarchitecture variant automatically selects the
appropriated set of features.
[thomas.petazzoni@free-electrons.com:
removed depends on inside hidden options, not needed.
removed SSE41/SSE42 options, not used.]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When HOST_XXX_DEPENDENCIES are derived automatically from
XXX_DEPENDENCIES, a self-dependency is created if host-xxx is a dependency
of xxx. This was the case for miniperl.
Filter out the self-dependency.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
MIPS EABI is a bare-metal ABI so remove it.
Also fix uClibc to really work with N32 ABI, which used the EABI knob
previously.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The help text of BR2_LINUX_KERNEL_DEFCONFIG is confusing: it seems to
point to the defconfigs in the buildroot tree. So explicitly refer to
the kernel tree in the help text.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[thomas.petazzoni@free-electrons.com: rewrote the patch, which was
corrupted in the original submission. Used quilt to refresh the Lua
patches, so that the version numbers are no longer present in the file
names]
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Configuring libmad with --enable-speed compromises accuracy and can cause audio
clipping in some cases (heard on ARM platform with some loud MP3s), so give
users the choice of MAD optimizations.
The default config corresponds to the default behavior of libmad's configure.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
The -fPIC breaks the purgatory of kexec (= the code that passes command-line
arguments to the kernel): kexec doesn't know how to handle the GOT and PLT
relocation entries.
There is also no reason at all to pass -fPIC. Shared libraries that require
it will add it to their local Makefiles, and normal executables have no
business with -fPIC (plus it adds overhead...).
The -fPIC was added by Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
in commit 8027784c. That commit adds sysroot parameters to CFLAGS.
There is no explanation why -fPIC is also added for x86_64.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Because beecrypt needs threads rpm does too since it's a mandatory
dependency.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Having DESTDIR defined will confuse the build of certain packages, so
we ensure that it is undefined from the environment when Buildroot
starts.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We should instead simply unset it at runtime, like we do for
PKG_CONFIG_PATH.
This reverts commit 9910eba33a.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The current structure of the LIBFOO_SITE_METHOD paragraph would make
it difficult to add documentation for the "file" and "local" methods.
There are enough possible values for LIBFOO_SITE_METHOD that
describing them in a sub-list seems to work well, which makes it
easier to add documentation for new methods.
Signed-off-by: Nathan Lynch <ntl@pobox.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Buildroot supports the use of local filesystem paths in LIBFOO_SITE
since the 2011.11 release, but this is not documented in the manual.
Fix this and slightly reword the surrounding doucmentation
accordingly.
Signed-off-by: Nathan Lynch <ntl@pobox.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If PKG_CONFIG_PATH is set in the environment, it allows pkg-config to
look for libraries outside of the buildroot tree. This is a problem
both for host and target builds. To avoid it, globally set an empty
PKG_CONFIG_PATH in the environment.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When a wget download is interrupted, the downloaded file is still created.
It will therefore not be re-downloaded in the next build, and the
extraction will fail.
To avoid this, download to a temporary file first and rename when the
download is successful.
The existing mechanism doesn't work for interrupted downloads because the
whole sub-shell is interrupted, so the rm-part never gets executed.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The Mercurial branch may change, which leads to non-reproducible builds.
So download a released version instead.
Also add configure option for e1000e.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
canusb support in libpcap uses pthreads but the configure script doesn't
account for -lpthread usage so it doesn't get added into LIBS which in
turn doesn't add the appropiate entry in pcap-config, causing build
failures for programs that link to libpcap that don't use pthreads
themselves (for example tcpdump).
Also add the conditional dependency on BR2_PACKAGE_LIBUSB for canusb.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As pointed out on IRC, the static tools causes problems on distributions
without glibc-static, and we don't need them - So just disable them like
we do for the target build.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: build using make instead of scons, fixup whitespace, target install]
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When BR2_JLEVEL is 0, set PARALLEL_JOBS to double the number of CPUs
detected. This allows one to more or less fully utilize the host
system without manually tuning the configuration.
Also make 0 the default value for BR2_JLEVEL.
Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
BR2_JLEVEL currently is expanded directly in $(MAKE), and used in
invocations of other build software (e.g. ct-ng). However, we are
going to allow "0" to be a meaningful value for BR2_JLEVEL, which
won't work for these uses. Given that it is not permissible to modify
BR2_-prefixed variables in Makefiles, we need an intermediate
variable.
Define PARALLEL_JOBS to $(BR2_JLEVEL), and use the former in MAKE's
definition. Uses of BR2_JLEVEL throughout the rest of the tree to be
adjusted similarly in follow-up patches.
Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
GStreamer requires xorg support in order for the ximagesink and xvimagesink
plugins to be available.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The original 'source-check' target first selects all packages, and then checks
whether the package tarballs can be found. This is useful for Buildroot
maintainers, but less useful for developers working on a specific project. The
latter only care about the packages used in that project.
This patch removes the allyesconfig dependency to source-check so that only
selected packages are checked. The original behavior is moved to a new target
'source-check-all'.
[Peter: removed source-check-all, people can just make allyesconfig before]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Sometimes it may be desirable to keep debug symbols for some binaries and
libraries on the target. This commit introduces the config option
BR2_STRIP_EXCLUDE_FILES, which is interpreted as a list of such binaries
and libraries, and the option BR2_STRIP_EXCLUDE_DIRS, which indicates
directories excluded from stripping entirely.
These exclusions are passed to the find command in the target-finalize step.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch adds a few utility functions to pkg-utils.mk.
Functions finddirclauses and findfileclauses help in building a find command
that skips a set of directories and performs operations on a set of files.
This pattern can for example be used to keep certain files or directories from
being stripped, or to remove certain files from a package installation.
The notfirstword function is the inverse of the 'firstword' function in make:
it returns all but the first word.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
inadyn is a DynamicDNS client/updater which works with dyndns.com, noip.com
and many other DDNS providers. It is minimal in footprint and requirements,
supports IP caching, multiple providers, multiple domain names, and
a variety of other situations.
[Peter: fixup whitespace / trailing spaces]
Signed-off-by: Dave Purdy <david.c.purdy@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
xinetd's configure does not set up an AR variable, and there
are no libtool files to autoreconfigure. So instead, lets
pass in AR during the build.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Expand the openWRT patch to fix xinetd's "uninstall" target,
so that buildroot's "xinetd-clean" removes the correct files.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of providing two variables, make GNU_TARGET_NAME give the real
target name, and remove REAL_GNU_TARGET_NAME altogether.
Signed-off-by: Richard Braun <rbraun@sceen.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Running sudo on the target fails with the following errors.
sudo: /usr/libexec/sudoers.so: No such file or directory
sudo: fatal error, unable to load plugins
The problem is that the installation of the sudo package is broken. This patch
replaces the hand-crafted install rule with the default AUTOTARGETS install.
Unfortunately, the default install fails because it includes a step that
invokes the cross-compiled visudo binary. A patch is provided here to disable
this visudo invocation, which is for sanity checking only. This local patch is
a backport of upstream commit 8209:0c4e3f68b2f5; the real fix will be in the
1.8.6 release of sudo.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The upstream URL for Buildroot packages is usually visible in the Config.in
file, not in comments in the Makefile.
Moreover, this URL does not point to the correct upstream project.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Note that liburcu-0.6.7-missing-gnu-source.patch has been merged upstream.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
delete mode 100644 package/liburcu/liburcu-0.6.7-missing-gnu-source.patch
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump php to version 5.3.14 to fix CVE-2012-2143 and other assorted bugs.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If openssl is not selected, configuration fails for the libfreefare package
as follows.
configure: error: Cannot find libcrypto.
This patch adds the missing dependency on openssl.
[Peter: use select instead of depends on]
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This removes fbv's compulsory dependency on either libpng and/or libjpeg and/or libungif.
The user can choose which compressed image format's fbv should support.
By default PNG, JPEG and GIF are selected.
Note that BMP format support will still always be included.
[Peter: Drop (unneeded) png specific libs]
Signed-off-by: Arn R <arnerro@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump bind to version 9.6-ESV-R7-P1.
Fixes CVE-2012-667.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fix bug #5276 by disabling IPv6 when the toolchain lacks it.
It builds fine even if it's enabled but it probably doesn't work fine.
Also bump to version 8.4:
* MaxServerLoad option added.
* Bugfix: invalid reverse proxy request when URL parameters are present.
* PolarSSL updated to version 1.1.4.
* Small bugfixes and improvements.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Configuration fails for the monit package, with the following error.
checking for SSL library directory... Not found
Couldn't find your SSL library files.
Use --with-ssl-lib-dir option to fix this problem or disable the
SSL support with --without-ssl
Tweak the monit configuration command line so that openssl is found.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bugfix release:
* Fix: Work around failure of ETHTOOL_GSSET_INFO for unprivileged
users (-k option)
* Fix: Report any unexpected error code from ETHTOOL_GSSET_INFO
(-k and -K options)
* Doc: Fix the date of the man page to match the last update
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Correctly handle empty SSL/TLS packets (Found by James Yonan)
* Fixed potential heap corruption in x509_name allocation
* Fixed single RSA test that failed on Big Endian systems
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In fact, not only qt can install stuff in $(STAGING_DIR)/usr/mkspecs,
but also libraries that wish to integrate with qmake, such as
qwt. However, qmake and al. will look inside $(HOST_DIR)/usr/mkspecs,
so the easiest solution is to have a symbolic link between the two
directories, instead of copying things around.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
While most packages that rely on libcurl use pkg-config, a few
packages (such as libxmlrpc) still use curl-config. So we need to fix
up the prefix locations in the curl-config script installed in
STAGING_DIR.
[Peter: only fixup if prefix=/usr]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fix the plugin search path by passing a --prefix to configure.
DESTDIR is used in the source code for the search path of plugins
(DESTDIR/lib/pppd/VERSION).
Since DESTDIR defaults to /usr/local we get the search path wrong so the
'plugin' directive requires a full pathspec to the plugin rather than
the .so name, which isn't nice or portable.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The bind plugin requires libcurl and libxml2.
These are properly selected but never added to COLLECTD_DEPENDENCIES.
Fix that.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fix WDDX extension build failure.
The documentation and source are conflicting about this, in theory
libexpat support is deprecated and libxml2 can replace it, but it seems
not so for WDDX, so pull in expat for it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The Zebra daemon now requires IPv6 support so disable it for non-IPv6
toolchains and add a comment mentioning it.
The BABEL protocol/daemon also requires IPv6 so just enable it when it's
available.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
PHP requires that net-snmp be built with the ability to load MIB code,
so force it on when the extension is enabled.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The optional webrtc echo canceller is written in C++, causing auto* to want
to link module-echo-cancel.so with CXX even if webrtc ISN'T used.
If we don't have C++ support enabled in BR, CXX will point to /bin/false,
which makes configure think we aren't able to create C++ .so files
(arguable true), breaking the build when it tries to install the .so
workaround it by patching up the libtool invocations to use C mode instead.
Fixes http://autobuild.buildroot.net/results/114e5bf0086f2394b36f17a70cb54b357a72413c
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The explicit gnutls prefix in combination with the libc.so linker script
and non-default sysroot seems to confuse external toolchains, causing
configure to error out. Workaround it by not using an explicit libgcrypt
prefix as it is installed in the sysroot anyway.
Fixes http://autobuild.buildroot.net/results/3b3901bea904bf32bccbd3e9a4274d604776cb98
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It doesn't really need C++ support on Linux, but the configure script
checks for it (and fails if not available), and the package is not easy
to autoreconf as there's C++ source files for Android/Windows, causing
automake to fail if AC_PROG_CXX isn't set.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Rather than the outdated buildroot.html. The asciidoc documentation is
still not autogenerated from git, instead a static snapshot is made per
release (like we did for /downloads/buildroot.html).
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump nfs-utils to version 1.2.6
Portmap or rpcbind (which we don't have) is required so select it.
Remove nfsiostat if there's no target python.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: add upstream URL, fix dep, drop explicit bluetooth option, no AUTORECONF]
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump hiawatha to version 8.3 - adds reverse proxy functionality.
Also define WORK_DIR to /var/lib/hiawatha instead of the uncommon
/usr/var/lib/hiawatha - missed it in the last path fixes.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This problem was already fixed by Markos Chandras for wget, but not for scp.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Enable IEEE 802.11u (interworking).
Also enable new supported EAP methods.
Switch from echo to sed where possible for a cleaner .config output
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Enable IEEE 802.11u (interworking).
Also enable new supported EAP methods.
Switch from echo to sed where possible for a cleaner .config output
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The patch was added after the multimedia category reorganization so it
became unreachable.
Move it to the final libmpeg2 package directory.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump php to version 5.3.13 to solve multiple CVEs.
The 5.2 series is no longer maintained.
The PCRE and SPL extensions are no longer optional.
Reflection is no longer optional either.
Ncurses was spun out to PECL.
Add a ton of new extensions and give more granular options on others
(like the libxml2-based ones).
The FastCGI option no longer exists, it's always on as long as CGI is.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
remove e2fsprogs-add-missing-dep-of-tst_uuid-o.patch as
the changes are already upstream
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
uClibc 0.9.33+ has resolver support, so we don't need to depend on a
snapshot uClibc version any more. We're also using 0.9.33 for ctng, so
we can just disallow the old internal uClibc versions instead.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If the buildroot infrastructure finds a patch file that contains the
$PKG-$VERSION tuple in the filename, it will only apply this kind of
patches, ignoring the rest of the patches in the package directory.
As a result of which, the gpsd-fix-libgpsmm.patch did not apply
because the gpsd-2.95-navcom.patch satisfies the $PKG-$VERSION convention.
The buildroot policy (as discussed during the Buildroot Developer meeting)
is to remove the package version from the patch filename.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Block unsupported processors according to gcc version.
Also remove the comments since we now hide them according to this.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump default snapshot gcc version to 4.8-20120429 so that it is newer
than our latest supported version (4.7.0 release).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump samba to version 3.6.5 with SMB2 protocol support.
Use shared popt rather than the builtin - it saves some space if you've
already got it on your target.
mount.cifs & umount.cifs have been unbundled so remove the option -
users must use cifs-tools for that.
Add recommended enhancement from bug #807 (make iconv support optional).
Optional smbd was already commited some time ago.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump to version 8.2.
Define CONFIG_DIR=/etc/hiawatha, LOG_DIR=/var/log, PID_DIR=/var/run and
WEBROOT_DIR=/var/www/hiawatha which are the same as the defaults but
without the /usr prefix.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When vala is built inside a Git repository with uncommitted changes, the
valac version number has -dirty appended. This creates problems for
packages (e.g. Midori) which require a valac version number without
the -dirty suffix.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The existing ccache infrastructure sets the cache directory hardcoded in the
ccache binary. As this directory was set to ~/.buildroot-ccache, the cache
is not necessarily local (e.g. in corporate environments the home directories
may be mounted over NFS.)
Previous versions of buildroot did allow to set the cache directory, but this
was also hardcoded (so you had to rebuild ccache to change it), plus that
support was removed.
See http://lists.busybox.net/pipermail/buildroot/2011-July/044511.html for
a discussion on this.
This patch modifies ccache to respect a new shell variable (exported from
the Makefile, based on a configuration option) instead of CCACHE_DIR.
The name CCACHE_DIR itself is already used by autotargets for the ccache
package.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The documentation generation process requires a special yold2man
program, for which we don't have a package in Buildroot. Since we
generally don't care much about documentation of packages, just adjust
the package Makefile.in to not build/install its documentation.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In kernel >= 3.3, the ext2_fs.h can no longer be imported from
userspace. This has been fixed for internal toolchains by adding a
patch to kernel headers, but this doesn't work with toolchains
generated by Crosstool-NG, or potentially upcoming external
toolchains.
socat in fact has a test in its configure.in, but the configure was
generated too long ago, and the generated test relies on the
preprocessor result and not the compiler result (but warns that in the
future, the compiler result will be used instead of the preprocessor
result).
So, by running autoconf on this package, we fix the problem: it
properly checks whether ext2_fs is usable or not, and acts
accordingly. Of course, it means that with recent versions of the
kernel, ext2-specific features of socat are unavailable, and we'll
have to wait for the socat developers to adapt their code so that they
use the e2fsprogs headers.
We also bump the version, since a new minor version fixing a security
problem has been released.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libnl support is enabled by default since version 1.0, so disable it
to avoid build breakage when there's no libnl.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Decimal floats were introduced circa gcc-4.2 or -4.3, and requires
the floating-point environement fenv.h in the C library.
The uClibc .config file used by crosstool-NG to build uClibc is the
same as used by the internal buildroot mechanism, and explcitly
disables fenv support.
The quick workaround is to simply disable decimal floats in all
crosstool-NG config files.
In the long run, it might be better to check this situation, and/or
add code and/or options in crosstool-NG to handle this (but it is
much more involved, and this workaround is sane).
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
SUPPORT_LIB_DIR would get resolved to the main buildroot directory for
external toolchains without C++ support, as:
- gcc -print-file-name=<nonexisting-file> returns <nonexisting-file>
- readlink -f <nonexisting-file> returns $PWD/<nonexisting-file>
So fix it by ensuring output of gcc -print-file-name actually exists
before using it.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump to version 3.2.9 and add an option to install the tools.
Since they're not usually required we default to N to reduce size.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The heirloom-mailx Makefile runs makeconfig if this has not been done
before. In a parallel build, this means makeconfig may be run several
times in parallel because there are two targets that depend on makeconfig.
See for instance
http://autobuild.buildroot.net/results/d24854be69961f71db189f9d804d4bd2cfa078da
To avoid this, run makeconfig in the configure step, which is not parallel.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Update the qemu samples configs that used kernel 3.3.4 to 3.3.5
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Beautify and lock down kernel version to avoid future issues.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Beautify and lock down kernel version to avoid future issues.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Update the version of crosstool-Ng used, bump to 1.15.2.
Also, update the bundled config files to match the new version.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit 0729b544b3 (Improve external toolchain logic to support IA32
Sourcery CodeBench toolchain) and e1f0804cc (external-toolchain: add
support for recent Linaro toolchains) changed the interface of
copy_toolchain_lib_root, but ctng wasn't updated so libraries weren't
copied to the target.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The FLAT (Separate Data) and FLAT Shared ABIs are rarely used, and the
FLAT Shared ABI requires the user to manually assign an unique ID to
each shared library, which we will never support in
Buildroot. Therefore, restrict ourselves to FLAT and FDPIC.
In addition to this, ensure that when FLAT is selected, only static
libraries are produced, because this is what FLAT supports. It will
fix problems such as
http://autobuild.buildroot.org/results/2d756d75162e8737e99df8189bde93ed1a09feef/build-end.log.
Moreover, we make FDPIC the default ABI, since if someone is using
Buildroot, it's most likely to generate a fairly elaborate embedded
Linux system, on which shared libraries are probably useful.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In order to use locale support on a Linux system, you need locale data
to be present:
* on a (e)glibc based system, this data is typically in the
/usr/lib/locale/locale-archive file, which can be created and
extended using the localedef program
* on an uClibc based system, the set of supported locales is defined
at build time by an uClibc configuration option.
This patch implements generating locale data for the following cases:
* Internal toolchain
* External toolchain based on (e)glibc. uClibc external toolchains
are not supported, because with uClibc, the set of supported
locales is defined at build time. CodeSourcery and Linaro
toolchains have been tested, Crosstool-NG toolchains are believed
to work properly as well.
* Toolchains built using the Crosstool-NG backend, but only (e)glibc
toolchains.
This feature was runtime tested with internal uClibc toolchain,
CodeSourcery ARM toolchain and Linaro ARM toolchain, thanks to a
simple C program that shows the data and a gettext translated message.
Note that this option differs from the "purge locales" option, which
is responsible for removing translation files and other locale stuff
installed by packages. At some point in the future, we may want to
clarify the respective roles of those options.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This host only package allows to build the localedef program, which is
needed to generate locale data for (e)glibc-based systems. The source
code has been extracted from the eglibc sources and put inside a small
and nice tarball by the PTXdist developers, which makes it easy and
convenient to build for the host.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#5198
Enable terminfo support as reported on bug #5198
Also install screenrc if it's not already present in the target.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add new powerpc-mpc8544ds sample qemu config.
Useful for SPE ABI testing.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This configuration provides a basic setup for using Buildroot
to create all of the images needed for a BeagleBone.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When the crosstool-ng backend is used, host-gawk is built as a
dependency of the crosstool-ng package, and therefore an host 'gawk'
binary is installed in $(HOST_DIR).
When the target gdb package is also selected, this unfortunately leads
to a build failure, as reported on
http://buildroot.humanoidz.org/results/f19c0499d08212d8b5100fa9434e1197092957db/build-end.log.
The problem is that the ./configure of gdb detects gawk in the PATH,
but at compile time, it fails to find gawk. This is due to the fact
that the gdb compilation process is started without the correct path.
This patch fixes this by passing $(TARGET_MAKE_ENV) in the environment
of the gdb compilation process.
A better fix would be to switch gdb to the AUTOTARGETS infrastructure
in the future.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Starting from 2012.03, the Linaro toolchains have separated the GCC
support libraries (libstdc++, libgcc_s) from the sysroot itself. So we
no longer have the case where all libraries are inside the sysroot, as
we had for all the previously supported toolchains.
Therefore, we add some logic to detect if such a separate directory is
used for GCC support libraries, and if it's the case, we make sure
that we take into account this directory when creating our own
sysroot, and when copying libraries to the target filesystem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump to dnsmasq version 2.61.
Add new conntrack functionality: makes for more sturdy firewall setups.
Make IDN build without libintl, it's no longer needed and problematic
for other packages when there's no NLS support enabled.
Locale support does require IDN so just build it when IDN=y.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This is a default configuration for Panda and PandaES, tested on both
platforms.
DEVTMPFS is enabled, to use static dev configuration one would need
to update the generic dev table for ttyO driver.
Panda is well supported in mainline kernel with omap2plus_defconfig,
so this should be safe.
U-boot SPL support is enabled by default as x-loader is now
deprecated.
With OMAP platforms u-boot,img format is prefered now, so it's enabled
by default as well. Also, on PandaBoard, the name of SPL target file
is MLO.
Signed-off-by: Nicolas Dechesne <n-dechesne@ti.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
For some platforms like OMAP, a new binary format is now being used
for u-boot: u-boot.img. It is basically u-boot.bin which has been
processed with mkimage.
Signed-off-by: Nicolas Dechesne <n-dechesne@ti.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
SPL is a first stage bootloader. On pandaboard it supercedes x-loader,
and should now be used.
This patch ensures that either SPL or xloader can be selected.
A config variable has been added for the name of the SPL binary generated
during u-boot build. For most platform it is u-boot-spl.bin but not always.
It is MLO on OMAP for example.
Signed-off-by: Nicolas Dechesne <n-dechesne@ti.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Frank Hunleth <fhunleth@troodon-software.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Move audio libraries out of the Audio and Video category into the
Libraries/Audio one.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Move multimedia libraries ouf of the Audio and Video category into the
Libraries/Multimedia one.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
So that this works:
% make defconfig BR2_DEFCONFIG=~/buildroot-defconfig
Right now we have to do:
% cp ~/buildroot-defconfig configs/buildroot_defconfig
% make buildroot_defconfig
That would dirty the buildroot tree and requires it to be writable.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump to use kernel version 3.2.16
Still keep sh4-r2d qemu sample config on 3.2 series since the sh-sci
driver from 3.3 uses unimplemented functionality (as of qemu 1.0.1)
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since the kernel.org security problem and reinstallation, libaio is no
longer available from this site. Use snapshot.debian.net as an
alternative source.
[Peter: Add spaces around '=' while we're at it]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Remove builtin OCF support from the openssl package into a new package.
Even though ocf support is just a header file we'd rather have it in a
separate package because of unrelated version bumps and to fetch it from
source.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add the ocf-linux package and linux kernel extension.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch improves two things:
* It makes sure that the linux-menuconfig and al. commands can be
executed even if the user hasn't executed 'make' before. Until now,
the commands were depending on the .configured stamp, which is not
sufficient since the linux package has been converted to the
GENTARGETS infrastructure. Instead, depend on the linux-configure
phony target.
* It makes sure that those commands are not available when the Linux
package is not selected, just like we do for Barebox.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The bcopy patch just changes bcopy for memmove which is incorrect since
bcopy and memmove use reversed src and dest parameters between them.
Oops!
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
gcc 4.3/4.4/4.5 accept the following arguments for --with-abi=
"" | 32 | o64 | n32 | 64 | eabi)
So, the "n64" argument coming from buildroot should be changed to "64"
so that gcc's ./configure step does not error out.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Enable uClibc 0.9.33.1 for the SH architecture.
Builds and works fine with the qemu sample config.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Enable AI_ADDRCONFIG support in uClibc otherwise we don't get the
ifaddrs.h header installed and thus lack getifaddrs support.
Quite useful for samba for example so we can use interfaces=eth0 statements in
the configuration file rather than klunkier
interfaces=192.168.1.1/255.255.255.0 ones.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Security Fix for RubyGems: SSL server verification failure for remote
repository.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add a configuration menu item to specify a list of lcdproc drivers to
be built. The list defaults to 'all'.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The xf86-input-vmmouse source code fails to compile intentionally on any
architecture but x86/x86_64. The following error is printed when compiling for a
different architecture:
vmmouse_proto.h:62:2: error: #error The vmmouse protocol is only supported on
x86 architectures.
vmmouse_proto.c:117:2: error: #error "VMMouse is only supported on x86 and
x86-64.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump to version 3.3.0
We now need to keep builtin headers since it's using very modern defines
which aren't yet mainstream in glibc or uClibc.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fix uboot-tools build breakage as reported by Peter Korsgaard.
Previously config.h was included in imximage.h but not the fw_env tool.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch add the Netatalk package to Buildroot.
[Peter: fix download URL, force c99 mode, tweak help text]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Target a powerpc 750 rather than the incorrect 440fp to avoid issues and
for correctness.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Busybox 1.20.0 add functionality to execute scripts from if-post-up.d
and if-pre-down.d, so add the missing directories to the device table to
get them created and avoid unnecessary warnings if not.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Option --enable-ipv6 now handled globally in autotargets configure.
Signed-off-by: Vanya Sergeev <vsergeev at gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump from 2012.04 to 2012.04.01
Fixes a nasty bug in the command line processing.
[Peter: keep kconfig name]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump to version 0.9.20.1 to fix CVE-2012-0249, CVE-2012-0250 and
CVE-2012-0255.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since busybox 1.20+ includes a lsof applet make sure lsof gets built
after busybox so that we get the full-blown version if both are enabled.
Also hide the lsof package unless BUSYBOX_SHOW_OTHERS is true.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add version 1.20.0, remove deprecated 1.16.x & 1.17.x versions and mark
1.18.x as deprecated.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The www-data user is defined in fs/skeleton/etc/passwd, with gid 33. But
gid 33 is not present in the group file.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
uClibc got sched_getcpu in 0.9.33, so the compat workaround should only
be used for older uClibc versions.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
IPv6 support needs the TIRPC library, which we don't have in Buildroot, so
forcibly disable IPv6 support.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add an option to install (or not) the berkeleydb binary tools.
The default is no since most of the time/application just need the
library and it helps save some space in the target.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The support for mklibs has been marked broken since more than a year
and nobody cared to bring it up to a working state.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Re-integrate in gcc-uclibc-4.x.mk things from
toolchain/gcc/Makefile.in that were completely gcc-specific. There was
no reason to pull that when building with other backends than the
internal one.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The BR2_CONFIGURE_DEVEL_SYSROOT, BR2_CONFIGURE_STAGING_SYSROOT and
BR2_CONFIGURE_BUILD_TOOLS were used only in a few places, and it is in
fact clearer to just use their value in the various places they are
used.
The ultimate goal is to get rid of the toolchain/Makefile.in file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Added patch to disable buggy_getaddrinfo test during configure when
cross-compiling.
[Peter: Remove --enable-ipv6 which is now handled globally]
Signed-off-by: Vanya Sergeev <vsergeev at gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some packages don't automatically enable IPv6 support if not configured
with --disable-ipv6, or use AC_TRY_RUN which doesn't work when cross
compiling (like curl), so explicitly configure with --enable-ipv6.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Drop kexec-fix-linker-options.patch as this has been fixed upstream.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This also requires moving a few include directives below the "all:"
target in the main Makefile, otherwise the new target to create the
toolchain file in pkg-cmaketargets.mk gets used as the default make
target instead of "all:".
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
There used to be a mechanism using which packages could leave a
.fakeroot.<something> file which could contain commands to be executed
within the fakeroot environment. Since this mechanism is no longer
used by any package, remove it from the common infrastructure.
The latest user was nfs-utils, which used this mechanism to do the
"make install" as root, since doing otherwise was not supported. But
since 16e7b8255c, nfs-utils has been
upgraded and converted to the package infrastructure, and this hack is
no longer necessary. Another past user was the ltp-testsuite package,
for the same reason, and since
a72a670489, the fakeroot hack is no
longer needed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The only variable that is used is HOST_LOADLIBES, defined for the
cygwin case in the kconfig build. Since we don't support cygwin,
simply get rid of this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit 4fbff28b removed the 'depends on' statements for the XML choice.
Therefore, the expat and libxml2 options are always available. Remove
the cryptic part of help text that tells you to select something if it
is not available.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The patch pattern was expanded before being into the patch directory so the
expansion can add incorrect files.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Short version avoids compiling problems with toolchains
containing long version string like Linaro toolchain.
[Peter: drop head/sed as -dumpversion returns version directly]
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Boost 1.49 added two new modules, locale and timer - So add sub options
to control compilation of those. The locale module by default compiles
the posix backend under Linux, but this needs monetary.h which isn't
provided by uClibc, so work around that.
While we're at it, hide the icu option as that is just an internal
configuration option used by E.G. the locale module.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
A host package that uses AUTORECONF (such as host-libglib2)
may end up running './config.status --recheck'. This will
call the configure script with the environment variables
set in HOST_MAKE_ENV. If PKG_CONFIG_SYSROOT_DIR is missing
this will cause the hardcoded sysroot dir take effect leading
to wrong paths.
See commit 22acade2ec which works around this problem by
fiddling with the generated .pc file. This commit becomes
obsolete with this fix.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Cc: Daniel Mack <zonque@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
screen's configure script thinks it is running on a SVR4 system when it
detects libelf, breaking the build.
At the same time cleanup the package somewhat, and ensure the correct
CFLAGS are used.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add gcc 4.7.0 to the toolchain options.
[Peter: drop 0001-toolchain-gcc-add-4.7.x-series.txt]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Switch from the strict UCLIBC_HAS_CTYPE_ENFORCED=y to the less
restrictive UCLIBC_HAS_CTYPE_CHECKED=y since it breaks dialog under
certain circumstances (bug #5018).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Makedevs path name is currently limited to 40, changed it to
PATH_MAX 4096 from linux/include/linux/limits.h
Signed-off-by: Julian Lunz <git@jlunz.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since these two special make targets are very useful but not yet
mentioned in the documentation I added them to the make help and
the manual.
Signed-off-by: Stephan Hoffmann <sho@reLinux.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The python bindings use swig, which we don't have in buildroot (but might be
installed on the host), so disable it.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes: #4886
[Peter: fix whitespace, C++ dep, optional zlib dep]
Signed-off-by: Simon Dawson <spdawson at gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The full valgrind installation takes more than 20 MB, while one typically does
not use all of its tools. This patch adds extra config options to select which
tools to install.
[Peter: Don't default experimental tools to 'y' as suggested by Arnout]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Correct fix for CVE-2011-4313
9.6-ESV-R5-P1 used a restart workaround.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The big-endian microblaze external toolchain is missing vital
characteristics being set, such as LARGEFILE support, IPV6 and so on.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Stephan Hoffmann <sho@reLinux.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Similar to how we recently changed dbus. At the same time also reorder
options to put 'none' option in front (default).
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The init script was expecting the binary to be called tinyhttpd, but httpd
was used. Fix it to install as tinyhttpd as httpd will conflict with other
web servers (E.G. the busybox one).
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fix two things in the giblib package:
1- fix prefix breakage
- s/STAGING/STAGING_DIR/ (Thomas)
- prefix is .../usr, not .../usr/lib or .../usr/bin
2- fix the configure.ac/Makefile.am breakage
- imlib2 sets IMLIB2_(LIBS|CFLAGS), not IMLIB_(LIBS|CFLAGS)
- autoreconf the package, install missing files
Note that both configure.ac and configure.in are present in the
package, so both are fixed, although only configure.ac is used
(configure.in is the legacy name).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The utmpx defines for when the target systems lacks utmpx is incomplete,
resulting in a build failure, so fix it.
This can be triggered by a uClibc toolchain that lacks UTMPX in the
configuration, or an older (<= 0.9.31) uClibc which lacks the
functionality.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Red Hat versions of perl do not honour the setting of LD_RUN_PATH
without this option. This leads to perl shared objects being installed
without an rpath set which causes problems for target tools when
searching for dependant shared libraries.
Signed-off-by: Will Newton <will.newton@imgtec.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The 3.3 kernel headers define the umode_t type within a __KERNEL__
preprocessor ifdef region. This results in a broken kernel header in the
buildroot toolchain.
[Peter: This is discussed upstream here:
https://bugzilla.kernel.org/show_bug.cgi?id=42986
Long term socat/syslinux should stop using this header, but this hasn't
been fixed upstream yet]
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Microperl will build host-microperl and install it into HOST_DIR/usr/bin,
where other packages will pick it up as _CONFIGURE_OPTS / _MAKE_ENV
prepends that to the path.
libxml-parser-perl didn't though, so it would still be built against
the system perl, causing host-intltool to fail when it would use
host-microperl together with libxml-parser-perl if the system perl
isn't compatible with host-microperl.
Fix it by using HOST_CONFIGURE_OPTS and ensuring it is built after
(host-)microperl if enabled.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The MICROPERL_INSTALL_TARGET_CMDS used the following construct in a
for loop:
[ -d $(@D)/lib/$$j ] && cp -af $(@D)/lib/$$j \
$(TARGET_DIR)/$(MICROPERL_MODS_DIR) ; \
[ -f $(@D)/lib/$$i ] && $(INSTALL) -m 0644 -D $(@D)/lib/$$i \
$(TARGET_DIR)/$(MICROPERL_MODS_DIR)/$$i; \
The problem is that when at the last iteration, the second test (-f)
fails, then the whole loop ends with a non-zero error code, and makes
aborts the build. This happens for example if the last Perl modules in
the list is Time::Local, because such modules are taken care of by the
first condition (that copies a complete directory).
By moving to full if statements, we ensure that the return code is
zero even if the condition was false.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Unfortunately kernel 3.3 doesn't seem to work properly at the moment.
So lock down headers to version 3.2.x and kernel to 3.2.12.
Tested on qemu 1.0.1
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As pointed by Sagaert Johan in the mailing list and further testing version
1.6.15 has some issues.
So move to version 1.6.14 which is far more stable and compliant.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Recursivity is needed with some tarballs containing debian patches:
.
debian
changelog
control
patches
02-COPYRIGHT.patch
[...]
Since we can find some files which are not patches in those directories, only
consider .patch* and .diff* files as valid patches.
Due to recursivity, strip-components option is no more necessary so it has
been removed.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
test should exit with Exit-Code 0 if no .ub-File present and copy the
file if Exit-Code 1, otherwise make fails
Signed-off-by: Markus Kaindl <markus.kaindl@stusta.mhn.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Make sure that liburcu (and the packages that select it) cannot be
enabled on the architectures that are not supported. At the moment,
only x86, x86-64, PowerPC and ARM are supported.
[Peter: add armeb as well]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
parted correctly depends on util-linux, but fails to select the
libuuid suboption of util-linux, causing the following build failure
if libuuid remains unselected:
checking for uuid_generate in -luuid... no
configure: error: GNU Parted requires libuuid - a part of the util-linux-ng package (but
usually distributed separately in libuuid-devel, uuid-dev or similar)
This can probably be found on your distribution's CD or FTP site or at:
http://userweb.kernel.org/~kzak/util-linux-ng/
Note: originally, libuuid was part of the e2fsprogs package. Later, it
moved to util-linux-ng-2.16, and that package is now the preferred source.
make: *** [/home/test/test/output/build/parted-3.1/.stamp_configured] Error 1
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: fixup s/big-endian/big endian/ as pointed out by Thomas]
Signed-off-by: Alvaro G. M <alvaro.gamez@hazent.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The build of libsigc 2.2.8 fails with gcc 4.6 with the following error
message:
In file included from signal_base.cc:20:0:
../sigc++/signal_base.h:48:11: error: 'size_t' does not name a type In file included from ../sigc++/signal.h:8:0,
The 2.2.9 version was released with a fix for this build problem, so
we directly bump to the latest version 2.2.10, which builds fine under
gcc 4.6.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libatomic_ops build fails on architectures such as MIPS or SuperH that
are not supported. So we make it possible to select the libatomic_ops
package only for the architectures that are known to be supported.
[Peter: add armeb as supported arch]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It adds very little size overhead as the functions are just wrappers
around utmp, and E.G. systemd needs it.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes the following problem:
checking whether NLS is requested... yes
checking for intltool >= 0.35.0... ./configure: line 12323: intltool-update: command not found
found
configure: error: Your intltool is too old. You need intltool 0.35.0 or later.
make: *** [/home/test/test/output/build/glib-networking-2.30.2/.stamp_configured] Error 1
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes the following problem:
atd.o: In function `run_file':
atd.c:(.text+0x35c): undefined reference to `fork'
atd.c:(.text+0x75c): undefined reference to `fork'
daemon.o: In function `daemon_setup':
daemon.c:(.text+0x4bc): undefined reference to `fork'
collect2: ld returned 1 exit status
make[1]: *** [atd] Error 1
make[1]: Leaving directory `/home/test/test/output/build/at-3.1.12'
make: *** [/home/test/test/output/build/at-3.1.12/.stamp_built] Error 2
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes the following build problem:
checking for intltool >= 0.35.0... ./configure: line 17915: intltool-update: command not found
found
configure: error: Your intltool is too old. You need intltool 0.35.0 or later.
make: *** [/home/test/test/output/build/transmission-2.33/.stamp_configured] Error 1
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: drop _INSTALL_TARGET = NO as it installs a shared lib]
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
While there's some microblaze support in mainline gcc from 4.6.x,
there still seems to be something missing with the uClibc support, so
disable these for now.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Software is ancient, upstream is missing and the package hasn't seen any
significant changes since it was added in 2003.
Unless someone steps up to update it (E.G. to gentargets), it will
be removed during the 2012.05 cycle.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The Avnet S6LX9 Microboard is a small USB-Stick sized module
containing a Spartan6 FPGA capable of running the Microblaze
softcore processor together with RAM and FLASH memory.
This board support pachage assumes that the Microblaze Bitfile
available from the Avnet website is programmed into the FPGA.
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch adds the options needed to build the SimpleImage containing
the device tree structure needed for the Microblaze architecture.
Handling Device Tree and SimpleImage will be handled in a general way
in the future.
I provide this patch to be able to build the system in the meantime.
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Alvaro G. M <alvaro.gamez@hazent.com>
Tested-by: Stephan Hoffmann <sho@relinux.de>
Downloading Microblaze LE toolchain works on a clean install
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This modifies the definition of DOWNLOAD to receive two arguments:
the first one is the full URL of the file to download, whereas the second
(and optional) is the name the file will have once downloaded.
Same thing with the SOURCE_CHECK_WGET and SCP functions.
All calls to these functions have been changed to the shortest form of
the new API, except for toolchains acquisition. Since there is quite a
number of different toolchains this call to DOWNLOAD is better set to the
generic one.
Signed-off-by: Alvaro G. M <alvaro.gamez@hazent.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Stephan Hoffmann <sho@relinux.de>
Downloading Microblaze LE toolchain works on a clean install
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: adjusted according to Arnout's suggestions]
Signed-off-by: Samuel MARTIN <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When binutils was converted to the package infrastructure (commit
009407e6b), the variable that elf2flt uses to find the binutils
libraries disappeared. So use HOST_BINUTILS_DIR instead of
BINUTILS_DIR1.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
ar9271.fw is the old convention for the firmware.
Starting with kernel 3.0 the new convention is htc_9271.fw which is a
newer version of the firmware so symlinking won't do it and there are no
guarantees that the newer firmware will work with the older driver
either.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump to version 1.0.0h to fix CMS and S/MIME Bleichenbacher attack (CVE-2012-0884)
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The help text for the choice of different stripping levels is removed,
since it is not displayed by menuconfig. Instead, only the per-option
help text is visible, so this text is improved.
[Peter: slightly reworked text]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When an external toolchain is used, it is very likely that it contains
a pre-built version of a gdbserver that has the same version as the
cross-gdb included in the external toolchain. So, we now provide an
option that allows to copy this pre-built gdbserver to the target.
As the location of the gdbserver in the external toolchain is not
standardized, we only support the CodeSourcery and Crosstool-NG
layouts for the moment. Other locations can be added later.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The BR2_ENABLE_DEBUG option selects the compilation and installation
of gdbserver on the target. This is a bit restrictive, especially for
external toolchains, which may already contain a gdbserver on the
target.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: fix download URL, move to 'Hardware handling' section]
Signed-off-by: Simon Dawson <spdawson at gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The squashfs3 package uses the old get_nprocs() GNU extension which does not
exist in uClibc. This has already been fixed in newer squashfs releases
(>=4.0). The patch is similar to the one committed in
dfa2a513e1
[Peter: add patch header]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Without the -m64, choosing the x86_64 architecture with a Sourcery external
toolchain will result in a 32-bit rootfs.
Also simplified the help text to reflect this change.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some of the patches depends on eachother, so rename them to ensure they
get applied in the correct order.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump to version 2.60 of dnsmasq with the new lua scripting option.
Switch LDFLAGS from MAKE_ENV to MAKE_OPT to make it work properly.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Building without BR2_PACKAGE_LUA_SHARED_LIBRARY failed because of
missing -ldl. dl is used by lua's dynamic module loading.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libethumb will determine during configuration phase whether to build the
optional libexif and libedbus modules. It will enable this modules if
libedbus or libexif are present on the target system. Therefore, we need
to add these packages as optional dependencies to libethumb.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Drop the patch for kernel >= 3.3
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
- bump to 2.5 and change download location
- disable iwmmxt support for CPU's that don't have
this feature
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump usbutils version to 005 and also switch to a debian mirror since
it's still missing upstream.
[Peter: add comment about autoreconf, use snapshot.debian.org]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The original version is gone, so switch to sourceforge wipe and bump to
version 2.3.1
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: only disable fallocate for uClibc toolchains]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes for CVE-2011-1944, CVE-2011-2821, CVE-2011-2834, CVE-2011-3919,
CVE-2012-0841 and others from upstream.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add security patches for CVE-2011-1202 and CVE-2011-3970.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
There are a couple of Renesas SH devices with 8 serial ports used.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: fix whitespace and deps (wchar, ncurses, only iconv if !locale)]
Signed-off-by: Simon Dawson <spdawson at gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This allows ccache to re-use its cache contents even if the compiler
binary mtime has changed. It is the simplest approach to solve this
problem, and it works for the internal, external and crosstool-ng
toolchain backends.
Of course, it leaves the user responsible for invalidating the cache
when necessary, but there doesn't seem to be a real good solution that
allows both to: 1/ keep the cache contents accross builds and re-use
it and 2/ invalidate the cache automatically when the compiler chances
in an incompatible way.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The problem is that without this, ccache would link against the zlib
of the build system, but we might build and install a different
version of zlib in $(O)/host afterwards, which ccache will pick
up. This might break if there is a version mismatch. A solution would
be to add host-zlib has a dependency of ccache, but it would require
tuning the zlib .mk file to use HOSTCC_NOCCACHE as the
compiler. Instead, we take the easy path: tell ccache to use its
internal copy of zlib, so that ccache has zero dependency besides the
C library.
Fixes bug #4808.
Thanks to Raúl Sánchez Siles <rsanchezs@infoglobal.es> for reporting
the bug and testing the proposed solution.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Convert microperl to gentargets infrastructure
* Bump to a more modern version 5.12.4
* Introduce the bundle options to simplify people's lives
host-microperl is a fully-fledged perl.
For the time being we can't build XS modules thus breaking
target automake support for example since it requires IO.
target-automake was broken before anyway since the automake version
bump.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
gpsd uses dbus-glib as the dbus interface, so it should only be built if
libglib2 has been selected. To simplify things, build dbus support only
if dbus-glib is selected.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It misses -lm when compiling miniperl
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In cf2486bf31, we changed from using the
-P option of wget (to set the output *directory*) to using the -O
option (to set the output *file*). Unfortunately, wget -O has a
strange behaviour: it creates an empty 0-byte file even if the
download fails (for example when there is no network connection).
The problem is that then Buildroot thinks the download was successful
and therefore goes on with extracting the tarball.
The following succession of events makes Buildroot think that the
download has been sucessful:
* Buildroot calls the DOWNLOAD_WGET macro with the URL of the
official site
* It tests if the file exists in the download directory, it doesn't
exist.
* It calls wget. wget fails to download the file and returns an
error code, but leaves an empty file with the correct name in the
downloaded directory.
* Since the previously download failed, Buildroot tries another
download from the Buildroot mirror (sources.buildroot.net)
* It tests if the file exists in the download directory... and it
exists! So this second download returns with success, and
Buildroot assumes the file has been downloaded properly.
This scenario brings us with the following result, where the download
fails, but Buildroot continues its execution and tries to extract the
tarball:
$ rm /opt/dl/glib-2.30.2.tar.bz2
rm: cannot remove `/opt/dl/glib-2.30.2.tar.bz2': No such file or directory
$ rm -rf build/host-libglib2-2.30.2/
$ make
make -C /home/thomas/projets/buildroot O=/opt/outputs/udisks/.
>>> host-libglib2 2.30.2 Downloading
--2012-03-03 12:06:25-- http://ftp.gnome.org/pub/gnome/sources/glib/2.30/glib-2.30.2.tar.bz2
Resolving ftp.gnome.org... failed: Name or service not known.
wget: unable to resolve host address `ftp.gnome.org'
>>> host-libglib2 2.30.2 Extracting
bzcat /opt/dl//glib-2.30.2.tar.bz2 | tar --strip-components=1 -C /opt/outputs/udisks/build/host-libglib2-2.30.2 -xf -
bzcat: Compressed file ends unexpectedly;
perhaps it is corrupted? *Possible* reason follows.
[...]
tar: This does not look like a tar archive
tar: Exiting with failure status due to previous errors
make[1]: *** [/opt/outputs/udisks/build/host-libglib2-2.30.2/.stamp_extracted] Error 2
make: *** [all] Error 2
$ ls -l /opt/dl/glib-2.30.2.tar.bz2
-rw-r--r-- 1 thomas thomas 0 Mar 3 12:12 /opt/dl/glib-2.30.2.tar.bz2
Therefore, this commit modifies DOWNLOAD_WGET so that it removes the
downloaded file if wget returns with an error.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
at91sam9260_defconfig contains support for the EVM (since v3.2).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Busybox also provides flash applets nowadays, so ensure the mtd version
takes precedence if both are enabled.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The recent zlib bump broke imagemagick. This has been fixed upstream
in 6.7.5, but the xml2-config fix is still not upstream and 6.7.5
needs autoconf 2.67 to autoreconf (and we have 2.65), so we cannot
easily use that.
Instead move to the most recent version using autoconf 2.64 and
backport the fix from imagemagick svn. At the same time also
ensure zlib+bzip2 support is picked up if enabled.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Linaro has just released a new pre-built toolchain, available as a
tarball, which is a pure toolchain (only the C library is
included). This makes this new Linaro 2012.01 toolchain usable in
Buildroot, so let's integrate the support for it.
In addition to simply adding the new external toolchain at the usual
locations, this patch allows need to adapt a few things to support
Linaro toolchains. Most toolchains store their libraries in the "lib/"
or "usr/lib" directories relative to the toolchain. Buildroot
toolchains on the other hand, store the libraries in the
"usr/<target-name>/lib" directory. And the Linaro toolchain has
choosen to use the "lib/<target-name>" directory. Therefore, this
patch adjust:
* The logic to search a particular library when that library needs to
be copied to the target directory
* The logic to deduce the sysroot directory from the libc.a file
location in the toolchain: removing "(usr/?)lib(64?)" is no longer
sufficient, we need to take into account the "lib/<target-name>/"
case.
Since the Linaro toolchain generates code for Cortex-A processors
only, the selection of this toolchain is limited to Cortex-A8 and
Cortex-A9.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current check for uClibc toolchain was verifying that a
ld-uClibc.so dynamic loader was present. However, with static-only
uClibc toolchains, this does not work. Instead, we check for an
uClibc-specific header file in the sysroot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When the mechanism that allows Buildroot to download external
toolchains automatically was added, all the sanity checks on the
external toolchains were not performed. This commit re-enables those
checks that we already do on external toolchains that are not
downloaded/extracted by Buildroot. This makes the toolchain checks
more consistent accross various configurations.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Each multilib variant need to be selected using a special combination
of flags, requiring specific choices of the Buildroot options. This
commit documents those configuration choices to make it easier to use
the various multilib variants.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We are going to add one more ARM Sourcery toolchain version, so it's
time to remove the oldest version.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The BR2_TARGET_OPTIMIZATION flags were not used by the external
toolchain wrapper, which broke the multilib selection logic of
multilib external toolchains. It also simplifies the compilation of
external programs since all flags are properly passed automatically by
the toolchain wrapper.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When an external toolchain has multiple variants organized in
sub-directories, Buildroot only copies the selected sysroot and not
all sysroots. In order to make this work, Buildroot creates a symbolic
link of the name of the original selected sysroot to the main sysroot
to trick the compiler so that it finds its libraries at the expected
location.
I.e, if the toolchain as the following organization (example take on
the ARM CodeSourcery toolchain) :
. for ARMv5T
armv4 for ARMv4T
thumb2 for ARMv7-A/Thumb
and ARMv4T is selected, then Buildroot will copy the contents of
armv4t/ from the toolchain into its $(STAGING_DIR) and then create a
$(STAGING_DIR)/armv4t symbolic link to $(STAGING_DIR).
However, our logic to do so only works when there was one directory
level for multilib sysroots. But in the MIPS CodeSourcery toolchain
there are multiple levels. For example, the MIPS16 soft-float
little-endian sysroot variant is in mips16/soft-float/el/ compared to
the main sysroot.
This patch improves our logic to support this case. The logic is a bit
more complicated as we don't want to create a symbolic link to an
absolute path, but a symbolic link to a relative path, because we want
the host/ directory to be relocatable.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The IA32 Sourcery CodeBench toolchain has a relatively special
structure, with the following multilib variants:
* Intel Pentium 4, 32 bits, the multilib variant is in ./ relative to
the main sysroot, with the libraries in the lib/ directory.
* Intel Xeon Nocona, 64 bits, the multilib variant is in ./ relative
to the main sysroot, with the libraries in the lib64/ directory.
* Intel Atom 32 bits, the multilib variant is in atom/ relative to
the main sysroot, with the libraries in the lib/ directory.
* Intel Core 2 64 bits, the multilib variant is in core2/ relative to
the main sysroot, with the libraries in lib64/ directory.
So the first two variants are in the same sysroot, only the name of
the directory for the libraries is different.
Therefore, we introduce a new ARCH_LIB_DIR variable, which contains
either 'lib' or 'lib64'. This variable is defined according to the
location of the libc.a file for the selected multilib variant, and is
then used when copying the libraries to the target and to the staging
directory.
In addition to this, we no longer use the -print-multi-directory to
get the ARCH_SUBDIR, since in the case of the 64 bits variants of this
toolchain, it returns just '64' and not a real path. Instead, we
simply compute the difference between the arch-specific sysroot and
the main sysroot.
We also take that opportunity to expand the documentation on the
meaning of the different variables.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This allows to easily select the corresponding Atom multilib variant
in the Sourcery CodeBench toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With the Sourcery CodeBench IA32/AMD64 toolchain, the proper -march=
switch must be passed. So, on x86_64, we make sure that
BR2_GCC_TARGET_ARCH gets defined to the correct value, just as we do
on x86.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The host-libecore build tries to build the X11 backend. This works if
you have X11 headers/libraries installed on your build machine, but
fails if you don't, and Buildroot shouldn't depend on such things
being installed.
Therefore, we force host-libecore to not build any of the graphical
backends (X, XCB or DirectFB).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
qsort_r was only added in uClibc 0.9.33, so only enable it when we're sure
it's available. For external/ctng toolchains we cannot easily know, so
simply disable it there.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The e2fsprogs configure script enables the build of the e4defrag
utility by default. Disable it unless BR2_PACKAGE_E2FSPROGS_E4DEFRAG
is selected.
Also the --disable-blkid option is not recognized by the configure
script. Use --disable-libblkid instead.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Update to latest stable release. SSL support now depends on
glib-networking with gnutls support instead of using gnutls
directly.
Remove libsoup-CVE-2011-2054.patch, this is fixed upstream.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
glib-networking provides network-related GIO modules for glib.
It is used by newer versions of libsoup to implement SSL/TLS
support.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Update to latest stable release and add a dependency on libffi which
is needed by GObject.
[Peter: fixup build on uClibc]
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As described in the buildroot dev day report, using a post-build script
is nowadays the preferred way of adding stuff to the rootfs.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
From the release notes:
Security: Fix use-after-free bug that could be triggered if command="..."
authorized_keys restrictions are used. Could allow arbitrary code
execution or bypass of the command="..." restriction to an authenticated
user.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
- Use git:// URLs for freescale git trees
- Enable hard fpu for A8
- Board uses uSD cards, so enable ext2 filesystem
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Buildroot config and Linux Kernel config.
Freescale binaries (xf86 video driver and multimedia codecs) not supported yet.
Signed-off-by: Mathieu Briand <mbriand@adeneo-embedded.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
/etc/os-release is becoming a standard interface for distribution
name/version info, so let's use that instead of the nonstandard
/etc/br-version. Format of the file is something like:
NAME=Buildroot
VERSION=2012.02-rc1-00003-g2d10e81
ID=buildroot
VERSION_ID=2012.02-rc1
PRETTY_NAME="Buildroot 2012.02-rc1"
For more details, see:
http://0pointer.de/public/systemd-man/os-release.html
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some URLs use url-encoded arguments to specify the file to download.
Wget will then use an output file name which includes all the ampersands
and such. However, this is not what we see from buildroot.
E.g.:
FOO_SITE="http://git.foo.com/?p=foo.git;a=blob;f="
FOO_SOURCE="foo.tgz"
wget will download this into $(DL_DIR)/index.html?p=foo.git;a=blob;f=foo.tgz
buildroot thinks it's in $(DL_DIR)/foo.tgz
To make sure the view of wget and buildroot are consistent, specify
the output file explicitly.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
