Add patch to kill kernel checks since we don't build the kernel
modules anyway.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit 009d8fceab introduced
--enable-shared --disable-static options for the host autotools packages,
ultimately causing a regression on the host-python build, leading to
a number of critical modules not being built on the target python on
64 bits system. Introduce a quick fix for the release and before a deeper
fix.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The prefix is not set when selecting this toolchain, resulting in a
build failure.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bundled config files have architecture-specific values in them,
which may break if buildroot is configured with another architecture
that does not forcibly set these option.
For example, the bundled config files are for x86_64, and define:
CT_ARCH_TUNE="generic"
This comes from the BR2_GCC_TARGET_TUNE config option (in buildroot) that
is set accordingly to the selected (arch,sub-arch).
But if someone configures buildroot for, say, generic ARM, then the
BR2_GCC_TARGET_TUNE config option is not set, and the crosstool-NG backend
Makefile believes it should not be pushed down to the crosstool-NG config
file.
BUT...
The crosstool-NG backend Makefile can not forcibly push BR2_GCC_TARGET_TUNE
down to the CT-NG config file. If BR2_GCC_TARGET_TUNE is empty, the user can
still set CT_ARCH_TUNE by running ctng-menuconfig.
The backend Makefile already passes such values only if they are set.
In the end, we can't push options as-is to the crosstool-NG config, but we
MUST provide sane bundled config files, which this patch does.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#4093
AUTOTARGETS doesn't handle compressed patches, so the '400' patch did
not get applied.
Fix it by extracting the patch. With this, the '500' patch is no longer
needed.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: only activate if barebox is enabled, fix deps]
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
These options should be in sync, both for consistency and because udev
needs devtmpfs enabled in the kernel.
We unfortunately cannot just select BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV
here, as that one selects udev - leading to recursion erors, so instead
we use depends on.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch makes libxml-parser-perl behave on my system - though it looks
like it isn't necessary on all host OSses (on gentoo and opensuse it works
without, but on ubuntu lucid and Scientific 6 it fails without the patch).
Signed-off-by: Heiko Helmle <helman@gmx.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When compiling Python on a host running Linux 3.0, the sys.platform
constant is set at "linux3". A lot of code (inside the interpreter
itself, its build system and third party apps and libraries) relies on
it to be linux2 on a Linux system.
This leads to the build of the target python package to break.
This behaviour has been reported on the Python bugtracker but is not
fixed yet.
http://bugs.python.org/issue12326
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
There's an even newer stable release available (1.4.14), but it
has problems with cross-compilation that we are still resolving
on the directfb-dev mailing-list.
[Peter: rename ppc patch to match]
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
util-linux uses mkinstalldirs to install .po files when locales are
enabled, but the definition of MKINSTALLDIRS comes from a tweaked
nls.m4 (based on the one from gettext).
When we autoreconf the package, we end up using the system (staging)
version of nls.m4, so MKINSTALLDIRS doesn't get defined.
Fix it by passing a definition of MKINSTALLDIRS to make during the
install steps.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The configure script correctly detects presence of libintl, but it forgets
to link against it, breaking the build.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Update the crosstool-NG libc-specific config files to match the
new set of options coming with the updated crosstool-NG.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Buildroot should use a stable release, not use an unstable development
version. Updating to the current stable branch (2.34) is not trivial,
so at least use the latest release from the stable 2.32 branch.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As the kernel doesn't automatically mount devtmpfs when an initramfs
is used, commit 424888e474 has
introduced a small wrapper script that mounts devtmpfs before starting
the real init.
Unfortunately, the problem is that in this case, the init process runs
without any 0, 1 and 2 file descriptors, so none of the
messages/errors printed by the various initialization scripts can be
seen. This is due to the fact the init process relies on 0, 1 and 2
being opened by the kernel before init is started. However, as
/dev/console isn't present on the filesystem at the time the kernel
tries to open the console to create the 0, 1 and 2 file descriptors,
the kernel fails on this and prints the famous "Warning: unable to
open an initial console".
The proposed workaround is to actually open 0, 1 and 2 to /dev/console
in the wrapper script, right after mounting the devtmpfs filesystem,
and before starting the real init. The "Warning" from the kernel is
still shown, but at least the messages from the init scripts are
visible.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
993e51bc22 introduced a <pkg>_DL_VERSION
in addition to <pkg>_VERSION. This variable, purely internal to the
package infrastructure, allows to store the *raw* version name, as
defined in the package .mk file. However, as this version string can
contain slashes, it is not appropriate to be part of the build
directory name of the package. This is why <pkg>_VERSION is defined to
be the same thing as <pkg>_DL_VERSION, except that slashes are
replaced by underscores.
However, the initial implementation didn't take into account the case
of host packages. So 763822e874 was
committed to fix this. But unfortunately, this commit got it wrong
again: it forgot the case where <pkg>_VERSION is set, but not
HOST_<pkg>_VERSION. In this case, HOST_<pkg>_DL_VERSION remained
empty. This can be seen for example by building host-sstrip.
This problem has been noticed by Julien Boibessot
<julien.boibessot@free.fr>, who also helped in fixing the
issue. Thanks!
The fix is simply to ensure that <pkg>_DL_VERSION is properly set in
all cases: when HOST_<pkg>_VERSION is defined, when only <pkg>_VERSION
is defined, and when no version is defined.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
midori 0.4.0 is out, but requires an additionnal dependency : vala
(maybe a more experienced person could add it?)
Signed-off-by: Frederic Bassaler <frederic.bassaler@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In the following command flow:
make distclean
make <board>_defconfig
make source
the dl directory would normally be created by the first wget download. If there are no such downloads, e.g. because you use a local download mirror (e.g. scp, file) or only use git/svn/hg/bzr repositories, the dl directory is not created automatically. This causes e.g. the 'pushd' command in the respective _DOWNLOAD commands to fail.
This patch adds a dependency to the 'dirs' target to 'source', fixing this scenario.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump samba to version 3.3.15 and add security patches for CVE-2011-2522
and CVE-2011-2694.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump iptables to version 1.4.12 for linux kernel 3.0 support
[Peter: Rename patch]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes a security hole that caused some SoupServer users to
unintentionally allow accessing the entire local filesystem when
they thought they were only providing access to a single directory.
This is the change from libsoup-2.34.3 backported to 2.32.2. It
doesn't include the changes to the test suite though.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The CodeSourcery toolchain for SH2-A platforms provide largefile
support, inet RPC, wide char and threads, so adjust the configuration
accordingly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Drop the dependency as it isn't really nice that other packages need
to select it, and kconf complains about it:
warning: (BR2_PACKAGE_E2FSPROGS && BR2_PACKAGE_USBMOUNT) selects
BR2_PACKAGE_BUSYBOX_SHOW_OTHERS which has unmet direct dependencies
(!BR2_PACKAGE_BUSYBOX)
Instead ensure that only the libraries are built by default, so
busybox applets are still used unless explicitly configured.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We currently don't build a host-gettext package, so when a package using
gettext is autoreconf'ed, we end up using autopoint from the host.
Autopoint unfortunately requires CVS, so if that isn't available autoreconf
fails.
From reading:
http://www.gnu.org/software/gnulib/manual/html_node/gettextize-and-autopoint.html
It seems that we don't really need to rerun autopoint, so fix it by
passing autopoint=/bin/true instead.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
e2fsprogs and util-linux both provide blkid / libblkid causing conflicts
if both are enabled. The preferred upstream (E.G. what is used by Debian)
is util-linux, so remove the options from e2fsprogs and make it use the
util-linux version instead.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Remove the BR option and enable the configuration setting in the
uClibc defconfigs.
The BR2_PROGRAM_INVOCATION option only adds very little overhead to
uClibc, and we have a number of packages needing it, so simply always
enable it - Simplifying the kconfig logic and the number of choices
users have to make.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
- We patch configure.ac, so we need to autoreconf
- configure uses pkg-config, so ensure the cross version is used.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The internal toolchain defaults to thread support enabled (and
most external toolchains have thread support as well), so enable
BR2_TOOLCHAIN_EXTERNAL_HAS_THREADS by default.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Adds support for inotify-tools, which are useful for scripting the
Linux inotify API.
[Peter: needs largefile support]
Signed-off-by: Mike Williams <mike@mikebwilliams.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Hal is deprecated upstream, our package has not seen any significant
work since it was added in 2007, nothing depends on it and it's blocking
a long-overdue udev update.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Allow the user to specify additional options for the target LDFLAGS.
I use this to pass the -te500v2 option to the linker, when using the
CodeSourcery toolchain for PowerPC. This chooses the correct CRT for e500 hard
float. Otherwise I get errors like
undefined reference to `_save32gpr_31'
undefined reference to `_rest32gpr_31_x'
at final link time.
[Peter: fixup, use qstrip]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The missing dependency used to break parallel builds.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As discussed here:
http://lists.busybox.net/pipermail/buildroot/2011-May/043251.html
Add BR2_ROOTFS_STATIC_DEVICE_TABLE for the extra device table file(s)
to create device nodes in /dev, rather than complicated logic in
BR2_ROOTFS_DEVICE_TABLE, making it complicated to move between static
and dynamic modes.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Orc - the Oil Runtime Compiler - is the successor of liboil.
There's a runtime library that is installed in staging and target
and there's a host version that can be built if orcc, the ORC
compiler is needed at build time.
[Peter: minor tweaks]
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The mad plug-in depends on libid3tag. This dependency used to be
implicit by selecting the id3tag plug-in. Now that this plug-in
is not any longer part of gst-plugins-ugly we need an explicit
dependency on libid3tag.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
CCOPTS is also used for HOSTCC in the netem/ directory which contains
host tools so just ditch it there to avoid extra non-native
optimizations to sweep by.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Newer vesions renamed iptables-multi to xtables-multi so fix
the symlinks accordingly.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
ipsets configure script checks the kernel headers to ensure the kernel
is new enough / has patch applied, and errors out if this is not so.
Ensure that the target kernel headers are searched, rather than
what is available on the build host.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add ipset support package.
Note that this requires bleeding edge (>=2.6.39) kernel version or
patches.
[Peter: needs largefile, host-pkg-config]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Host libraries should always be built using dynamic linking, rather than
static if BR2_PREFER_STATIC_LIB is enabled, as that then breaks dependent
libraries expecting a shared library.
Reported-by: Andy Kennedy <andy.kennedy@adtran.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Devtmpfs (which is used by devtmpfs/mdev/udev options) doesn't get
automounted by the kernel when an initramfs is used, causing boot
failures when a dynamic /dev is used.
Fix it by adding a pre-init script to mount devtmpfs before running init.
Reported-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Ensure alsa-lib gets built before SDL if enabled, so the SDL configure
script correctly detects alsa support.
Noticed by Ayla on IRC.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
sh2eb and sh2a_nofpueb gnuconfig targets are no longer supported
in Buildroot. This patch replaces these Buildroot targets with sh2
and sh2a respectively, and adds sh4a targets as these are widely
used.
To build for devices without an fpu, the relevant toolchain flags
will have to be specified.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Install gvfs into staging and compile the installed schemas for
use on the target.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Drop the dbus-glib dependency as gvfs uses dbus directly.
Also change dependency on the XML parser for dbus to be more
in sync with the dbus package.
[Peter: drop expat|libxml2 deps as shared-mime-type already selects libxml2]
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Need to use $(MAKE1) as parallel builds appear to be broken.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
iso9660 used LINUX26_IMAGE_PATH, which got renamed. Adjust to match
the new name.
Reported-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Move fw_printenv / fw_setenv options from the uboot bootloader build to
the uboot-mkimage package, and rename it to uboot-tools.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#3985
The wildcard function in make 3.82 no longer sorts the output, so
add an explicit sort so the defconfigs are listed in a sensible order.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Move crosstool-NG to package/ and make it an autotarget package.
This requires a new patch (now upstream).
Now, the crosstool-NG toolchain backend only contains enough to build
the toolchain, there's no more reference to building crosstool-NG as
a package.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
There are newer releases available, but this is the last release that
uses libgcrypt. Newer versions prefer nettle over gcrypt. But then there
are users of gnutls (for example libsoup and glib-networking) that
assume that gnutls uses gcrypt as its crypto backend. They won't compile
with a version of gnutls that uses nettle.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
'source-check' breaks because the *_DEFCONFIG options are empty strings.
There is an explicit check to avoid erroring-out when doing 'source', but
not when doing 'source-check'.
This patch set DL_MODE right from the first sub-make call.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit a4ca959321 (u-boot: rename to uboot) forgot to change the kirkwood
format handling to look for the new variable name, breaking support.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
On "make source", just download the required sources, and do not
build the entire toolchain. This requires a new patch against
crosstool-NG (got from upstream).
The "uclibc-source" rule requires an installed and configured
crosstool-NG, so it has to be after the variables declaration.
For consistency, move down the main rule "uclibc".
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The S01logging script currently displays the start/stop messages like this:
Start logging :OK
The normal form for these messages is:
Start logging: OK
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The argtable2 sourceforge project provides easy parsing of command line
options and file contents.
[Peter: Misc cleanup/fixes]
Signed-off-by: Robin Holt <holt@sgi.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This fails when Make decides to process sysvinit targets before busybox.
Signed-off-by: Milton Soares Filho <milton.soares.filho@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The assumption that all kernels are in
http://www.kernel.org/pub/linux/kernel/v2.6/ is no longer true:
versions 3.x are in separate directories.
We now compute the directory name from the major and minor versions of
the version provided by the user. This assumes that the 3.1 version
will be in a /v3.1/ directory, which we don't know yet because the 3.1
cycle hasn't started yet.
At the same time, we add support for the official -rcX versions.
Patch tested by compiling 3.0-rc6, which Buildroot has successfully
downloaded and built.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since at91dataflashboot has no suboption, using "menuconfig" is
useless and confusing, as it creates an empty submenu in the
configuration interface.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As the kernel and bootloaders do not use the normal BR2_PACKAGE_*
Kconfig options, their target name was not automatically added to the
global TARGETS variable. Each bootloader .mk and the linux.mk had to
add their own target manually to TARGETS, and the package
infrastructure was making tests on non-existing Kconfig variables.
This commit improves the package infrastructure so that it looks at
BR2_PACKAGE_<pkg> for packages, BR2_TARGET_<pkg> for bootloaders and
at the special BR2_LINUX_KERNEL for the linux package.
This allows to simplify a little bit the bootloaders and linux .mk
files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This will allow to match the currently Config.in option
BR2_TARGET_UBOOT, in order to make it easy to integrate U-Boot into
the package infrastructure.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We removed the shell script that wrapped valgrind (not nice to install
such non-standard things), and will let the user use the uclibc.supp
suppression file if needed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Without an mdev.conf file installed, mdev generates some /dev entries in
an incorrect or non-standard way. Some examples:
1. /dev/null has permissions 660, but it should be accessible to normal
users;
2. alsa devices get created in /dev, not /dev/snd as is more common,
and as the default value of BR2_PACKAGE_ALSA_LIB_DEVDIR suggests;
3. event<N> files are created in /dev, not /dev/input.
This mdev.conf is a selection from the examples provided in the busybox
sources with minor tweaks.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
NSS is the Network Security Services library developed as part of
the Mozilla project. It provides similar functions to OpenSSL but
allows MPL, GPL and LGPL licensing.
[Peter: fix target install]
Signed-off-by: Will Newton <will.newton@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This will be needed for the Linux kernel package, which needs to
download patches in a custom way.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The mkimage for the host is now built by a package, so that
boot/u-boot/u-boot.mk is no longer responsible for doing this. It
makes things a lot easier to handle, as linux/linux.mk now simply
depends on host-uboot-mkimage.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The feature of building mkimage for the target is removed, it wasn't
building with current U-Boot, and doesn't make a lot of sense (mkimage
is needed only to prepare a kernel image, or an U-Boot script).
The feature of building mkimage for the host is moved to a proper
package. It duplicates a few things (U-Boot URL, etc.) but it makes
things a lot cleaner than having it handled by boot/u-boot/u-boot.mk.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The libxml2 dependency is new in this version, and does not behave nicely with
cross compile. The configure script looks for the host xml2-config. Add
'--disable-xml2' as a workaround for now.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Grub 2 has been marked BROKEN in June 2010, and nobody cared to fix it
since then.
At that time, it was marked broken because the build process needed a
Ruby interpreter available on the host, and it's really a pain that
building a bootloader needs such a thing.
I've tried to upgrade the package to Grub2 1.99-rcX, and now it does
not need a Ruby interpreter anymore, but instead requires a tool
called "autogen", which itself needs the Guile Scheme interpreter.
Since we haven't heard any complaints about Grub2 being marked broken,
and since it's such a pain to package, let's get rid of it. Of course,
anybody interested in Grub2 is invited to contribute a working
package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Moreover, the installation of pxelinux and/or isolinux is now handled
as suboptions, like we traditionally do for other packages. This allows
to have a single option (BR2_TARGET_SYSLINUX) that enables the
syslinux package.
[Peter: drop basename in install step]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit converts the at91dataflashboot bootloader build process to
GENTARGETS. It also does the following changes :
* As the package directory name is at91dataflashboot, the
configuration options and make variables are renamed to
AT91DATAFLASHBOOT instead of DATAFLASHBOOT.
* Since the board selection in Kconfig wasn't used anywhere, get rid
of it. at91dataflashboot is only for AT91RM9200 apparently anyway.
[Peter: add ':=' -> '=' change]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The patching procedure was using $($(NOHOSTPKG)_NAME) to find the name
of the package without the host- prefix for host packages, which is
needed to find the package directory and the prefix of the patches.
However, this $($(NOHOSTPKG)_NAME) variable is empty when there is
only an host variant for the package and no target variant for it.
Therefore, instead of using this $($(NOHOSTPKG)_NAME) variable, we now
use a new $(RAWNAME) variable, which is always the name of the package
without the host- prefix, even for host packages.
Thanks to Yann E. Morin for providing the tip on using patsubst
instead of subst.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This will allow the bootloader makefiles and the kernel makefile to
rely on the GENTARGETS infrastructure.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When using GENTARGETS (or macroes depending on it), there is no way of
specifying a custom extraction procedure. When using the patch one can
simply define $(PACKAGE_NAME)_EXTRACT_CMDS which will override the
default. If non is defined it will fall back to the default extract
procedure.
An example could look like this:
=== PACKAGE BEGIN ===
FGLRX_VERSION=11-3
FGLRX_SOURCE:=ati-driver-installer-$(FGLRX_VERSION)-x86.x86_64.run
FGLRX_SITE:=http://www2.ati.com/drivers/linux/
define FGLRX_EXTRACT_CMDS
sh $(DL_DIR)/$(FGLRX_SOURCE) --extract $(@D)
endef
$(eval $(call GENTARGETS,package,fglrx))
=== PACKAGE END ===
Signed-off-by: Allan W. Nielsen <a@awn.dk>
Cc: Allan W. Nielsen <a@awn.dk>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add a package for the Netscape Portable Runtime library.
Signed-off-by: Will Newton <will.newton@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Remove obsoleted configurations and add options for new
dependency-less plugins.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Make the build of the dependency-less plugin 'encoding' optional.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
There's no reason to make the source files writable for everyone.
Reported-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Lame contains an optional gtk12 based frame analyzer application, which
will be built if gtk12 is detected (using gtk-config). We no longer
have support for (the obsolete) gtk12 in BR, but the host might have
gtk-config, so forcible disable it.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The i586 was introduced almost 20 years ago, and some software
(NPTL, libstdc++, ..) doesn't work nicely with i386 anymore, so
it is time to move on.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Rsyslog is a powerful and flexible syslog daemon.
[Peter: whitespace, rename initscript, allow platform override of conf file]
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Hardcodes policy, is not critical, and people might not have tty3
(E.G. virtual consoles) available.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The logging mechanism startup being in inittab, it isn't easy to
overcharge the default policy. With this patch, the startup of the
syslog daemon is moved to an init.d script, that can easily be
overwritten.
[Peter: use install -D]
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Remove this quirk since the tested code is no longer present in busybox
since 1.10.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
0.9.29 doesn't seem to build anymore with the toolchain versions in BR
and is very old, so remove it.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This code is no longer useful, since the oldest version supported by
Builroot is 1.16.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Stunnel is an SSL tunnelling proxy.
[Peter: misc fixes, Config.in, allow skeleton override of stunnel.conf]
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The /dev/shm directory is neither created nor mounted as tmpfs as boot
time. This will cause troubles when using named semaphores on the
system.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The embedded sqlite module forces FILE_OFFSET_BITS=64 unless
SQLITE_DISABLE_LFS is defined, breaking the build for !largefile toolchains.
Webkit internally builds sqlite, so that's affected as well.
Fix it by passing -DSQLITE_DISABLE_LFS in C/CXXFLAGS for !largefile
builds, similar to how we do it for the standalone sqlite package.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Libiqrf is library written in C which implement specific iqrf
protocol to communicate with iqrf usb devices (http://iqrf.org).
[Peter: select libusb, fix Config.in indentation]
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: misc fixes, use real version, correct compile/link flags]
Signed-off-by: Mike Williams <mwilli60@harris.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Even though MAXARGS 1000 seems large, it wasn't enough for at least
QtWebKit package. This new version does not have any predefined limits.
Closes#3907
Many thanks to Thomas for tracing the source of the build error.
[Peter: Return rather than abort()]
Signed-off-by: Daniel Nyström <daniel.nystrom@timeterminal.se>
Reported-by: Thomas Björk <thomas.bjork@home.se>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Install into /usr/lib and use the normal make install target instead of
manually messing around with symlinks and .so versions.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
009d8fceab and 0a5e5534cb moved the --enable-static configure flag
from package files to the default _CONFIGURE_CMDS in
package/Makefile.autotools.in.
This broke Autotools packages that override _CONFIGURE_CMDS.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
009d8fceab and 0a5e5534cb moved the --enable-static configure flag
from package files to the default _CONFIGURE_CMDS in
package/Makefile.autotools.in.
This broke Autotools packages that override _CONFIGURE_CMDS.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Otherwise configure errors out with:
Error: QtDeclarative was requested, but it can't be built due to
QtScript or QtGui being disabled.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
bmon can be built without ncurses support (needs a small patch though),
so don't enforce it in kconfig.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit 009d8fceab (add --{enable,disable}-{shared,static} automatically)
caused us to pass --enable-static in the normal (non-static) case as well,
which bmon interpretes as a request to link the bmon program statically,
bloating the image.
Fix it by passing an extra --disable-static to bmon configure to nullify
this.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Now that those values are passed at the autotools infrastructure
level, there's no need for every package to pass inconsistent values.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
For target packages, depending on BR2_PREFER_STATIC_LIB, add the
correct combination of --{enable,disable}-{shared,static} flags to
./configure calls.
* When BR2_PREFER_STATIC_LIB is enabled, we pass --enable-static
--disable-shared.
* When BR2_PREFER_STATIC_LIB is disabled, we pass --enable-static
--enable-shared. We enable static libraries since they can still be
useful to statically link applications against some libraries
(sometimes it is useful for size reasons). Static libraries are
anyway only installed in the STAGING_DIR, so it doesn't increase in
any way the size of the TARGET_DIR.
For host packages, always pass --enable-shared and --disable-static.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The swaponoff applet doesn't build (and doesn't make sense) on non-MMU
platforms.
The ash shell cannot build on non-MMU platforms (because it uses
fork()), so select the hush shell instead.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Unfortunately, the official Blackfin toolchains are built without the
shadow password support, so our default Busybox configuration fails to
build.
Therefore, we introduce a new hidden knob
BR2_TOOLCHAIN_HAS_SHADOW_PASSWORDS, which is set to yes for Buildroot
internal toolchain, for toolchains generated by the Crosstool-NG
backend, for Glibc external toolchains and for Uclibc custom external
toolchains. It is left unset by the Blackfin toolchain profile.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixed an l10n-ism in retrieval of the svn revision.
Signed-off-by: Stephane Fillod <fillods@users.sf.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
fakeroot for the target fails to build against glibc, due to largefile
related problems :
libtool: link: /home/test/outputs/test-503/host/usr/bin/powerpc-linux-gnu-gcc -pipe -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o faked faked.o ./.libs/libcommunicate.a -ldl
{standard input}: Assembler messages:
{standard input}:2592: Error: symbol `__fxstatat64' is already defined
{standard input}:2627: Error: symbol `__fxstat64' is already defined
{standard input}:2663: Error: symbol `__xstat64' is already defined
{standard input}:2698: Error: symbol `__lxstat64' is already defined
make[3]: *** [libfakeroot.lo] Error 1
As fakeroot for the target is not really needed, and was only added
when we packaged fakeroot for the host, just make fakeroot not
selectable for the target.
We have to keep the AUTOTARGETS call for fakeroot on the target,
because the host variant does not work otherwise, due to issues in the
package infrastructure (that will be fixed post-2011.05).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The QtScriptTools library depends on the QtGui library, as can be seen
in the src/src.pro file of the Qt sources :
!contains(QT_CONFIG, no-gui):contains(QT_CONFIG, scripttools): SRC_SUBDIRS += src_scripttools
If the scripttools are enabled in the Qt configuration, but not the
gui, then the scripttools library is not built by Qt, and the
Buildroot build process fails with:
cp: cannot stat `/home/test/outputs/test-502/host/usr/sh4-unknown-linux-gnu/sysroot/usr/lib/libQtScriptTools.so.*': No such file or directory
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The psmisc-no-__progname.patch removes the usage of __progname, which
removes any difference between pstree and pstree.x11. Therefore, we
make sure to not create the pstree.x11 symbolic link in the target.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Peter on IRC reported some build failures for different targets.
They were of two kinds:
- missing/unknown stack unwinding support
- missing *_chk functions
The first is about configure not being able to automagically determine
if stack unwinding support is available for the target. The second is
about fortified build forgetting to build the fortified functions.
This applies to both glibc and eglibc.
After some discussions on IRC with Jacmet, it appears that we can
safely assume both of the following:
- virtually all targets of buildroot will have stack unwinding support
- we do not care about fortified builds (so far)
So, update the bundled crosstool-NG .config file to saner defaults:
- force unwind support
- disable fortified builds
[Peter: fix 'force non-fortified build' sed invocation]
Reported-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
1.11.3 is the latest stable version, and it has a few improvements
we'll find usefull. For example, it hasa a boolean option for
disabling the {,e}glibc fortified build (instead of requiring us
to shoehorn it in extra cflags.
Update the config files.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Currently, the bundled CT-NG config file has no C library configured.
It is quite complex to add and/or munge options in this case.
Now, with one config file per libc familly, it becomes easier.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
bind needs to be specifically told where OpenSSL is, otherwise, the
build fails with:
checking for OpenSSL library... configure: error: OpenSSL was not found in any of /usr /usr/local /usr/local/ssl /usr/pkg /usr/sfw; use --with-openssl=/path
If you don't want OpenSSL, use --without-openssl
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
gtk2-engines is bumped from 2.9.1 to 2.20.2 (the latest available
version compatible with Gtk2). The package is converted to the
AUTOTARGETS infrastructure.
The config option is renamed so that it matches the package name
(gtk2-engines instead of libgtk2-engines).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use the Gnome FTP server as the download site, like we do for other
components of the Gtk stack.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The patch libglib2-mkenums-nowarn.patch is removed, since it has been
merged upstream.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
dhcpdump 1.7 required tcpdump, but version 1.8 now uses libpcap
instead. Also version 1.8 is no longer autotools based, but just a
simple Makefile.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Festival does not build, nobody cared since a long time, and they have
been marked deprecated since quite some time.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* libnl fails to build with multiple jobs so keep make at -j1
* Multiple libraries are installed so update uninstall target for this
[Peter: remove libnl/libnl-*.* to catch subdir + any new libs in the future]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It depends on utils provided by host system, and
they sometimes are missing.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libnl build breaks with bison <2.4 with:
bison -y -d -o route/cls/ematch_syntax.c route/cls/ematch_syntax.y
route/cls/ematch_syntax.y:31.9-16: syntax error, unexpected
identifier, expecting string
So build our own known good version and use instead.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
haserl no longer ships haserl_lualib.inc so our lua2c hack didn't work
anymore.
Fix is by adding a patch to re-add it and move the Makefile.in changes
to here rather than with sed.
Longer term we should probably add host-lua support instead.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The arm-softfloat.patch.conditional patches are no longer in Buildroot
since 9af188d883 (October 2009), which
removed support for gcc 3.x and 4.0.x.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The 0.9.29 version of uClibc can no longer be selected on AVR32 since
December 2009 (b642f7eefb). Therefore,
those two patches are now completely useless.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of the current mix between system config and filesystem menus.
At the same time rename 'Target filesystem options' menu to
'Filesystem images' as it now only contains options about image formats.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump kernel versions of qemu/mips-malta and qemu/arm-versatile sample
configuration files to 2.6.38.6
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The special marker in etc/inittab might not be present with a custom
skeleton. At the same time make the option always active, remove the
hardcoded tty1/tty2 gettys and reword the option description slightly.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This allows to have a device table for all directories/files and
another device table for the device files themselves. Both are needed
for static /dev, but only the first one is needed when
devtmpfs/mdev/udev are used.
We take this opportunity to move the documentation of the device table
format in a common location, package/makedevs/README.
[Peter: simplify code slightly, fix indentation]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The S10udev startup script did useless things such as mounting sysfs,
mounting a tmpfs filesystem in /dev/, etc. Those things are already
done during in the default inittab.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Four methods for the creation of device files in /dev are now
proposed:
- static method uses device table as before
- devtmpfs method enables this feature in kernel
- mdev method adds mdev starting script to the file system
and selects mdev itself for installation
- udev method selects udev for installation
All dynamic methods are based on devtmpfs, so one doesn't need to care
about /dev folder.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The recent commit adding the external toolchain wrapper has broken the
support for external toolchain. The check_arm_eabi, check_cplusplus
and check_cross_compiler_exists functions were using TARGET_CC, which
points to the toolchain wrapper, but at the moment those functions are
called, the wrapper hasn't been generated yet.
We fix this by passing to these functions the path to the C or C++
compiler they should use for their tests.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Now that we use a wrapper for external toolchains (and internal ones
default to the correct setting), we no longer need to explicitly pass
sysroot/march/mtune/mabi/floating point mode in TARGET_CFLAGS.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add a simple toolchain wrapper for external toolchains, which forces the
correct sysroot/march/mtune/floating point options needed to use it
with buildroot.
With this in place the external toolchain behaves similar to the internal
ones, and the special handling can be removed. This also means that the
toolchain is usable outside buildroot without having to pass any special
compiler flags.
Also adjust the downloadable external toolchain support to install under
HOST_DIR so it can be used after the temporary build files are removed.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
alsactl needs /var/lib/alsa to store asound.state when saving mixer
settings so make it in the target.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump bind to version 9.6-ESV-R4 since the 9.5 series is no longer
supported.
While at it switch to the ESV (Extended Support Version) branch instead
of going for the latest.
Also adjust the package to build against OpenSSL when available for
proper DNSSEC support and libxml2 too.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit 7e3e8ec040 (CFLAGS/LDFLAGS: don't add -I / -L args for STAGING_DIR)
exposed a lingering libtool problem.
Unless instructed otherwise (using -L) libtool will search its built in
system path for libraries, and use those instead if found. The default
search path is '/usr/lib, /lib, /usr/local/lib', which is no good for
cross compilation.
Fix it by setting the system search path to the empty string, effectively
disabling this feature.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Doesn't get applied because of the 0.1.10 patch, doesn't seem important
and hasn't been updated since it got added back in 2008.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Make mpc mandatory since we are probably building bleeding-edge
* Change snapshot naming convention to match the source
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some configure options changed so adjust.
Forcibly disabling threads isn't good and also it's detected by
configure when there are no threads.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some configure options changed so adjust.
Forcibly disabling threads isn't good and also it's detected by
configure when there are no threads.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
mklibs is a broken option, so mark it as so pending a proper fixup or
punting it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add OpenMP support in gcc as an option instead of dynamically enabling
it when threads are present.
Also fix it up since we never installed libgomp to the target or staging
thus it was never really functional.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Exposed by commit 7e3e8ec040
net-snmp-config goes for -L/usr/lib thus things break since this wins
over the sysroot if we have a host net-snmp library around when we build
packages that link against net-snmp.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
See uclibc #2089 for details.
This is still not included upstream, but lets include it anyway as
several people have been running into the issue.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Now that we use sysroot for all toolchains, the explicit -I / -L arguments
in CFLAGS / LDFLAGS aren't needed anymore (And having them makes the build
quite noisy for certain packages as STAGING_DIR/include normally doesn't
exist).
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
See uclibc #2089 for details.
This is still not included upstream, but lets include it anyway as
several people have been running into the issue.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Update uClibc snapshot version config to avoid build stalls.
This time we take care of the new UCLIBC_HAS_FTS and
UCLIBC_HAS_BACKTRACE options.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add gcc 4.6.0 to the toolchain repertoire:
Target gcc is known to be broken in some scenarios.
This version is considered experimental so things may break.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Make target gcc a more usable option.
* Nuke duplicate libgcc_s*.so* in /usr/lib since it confuses target gcc
* Copy *crt*.o files to the target system to unbreak gcc
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add inotify_init1 system call support to uclibc 0.9.31.
Required for modern versions of udev.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add SOCK_CLOEXEC and SOCK_NONBLOCK support to uclibc 0.9.31.
Required for modern versions of udev.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When mkimage is built without the rest of u-boot (for kernel uImage
support), u-boot doesn't get configured for a specific board, so config.h
isn't created and the build breaks.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump libcap to version 2.20 and adjust style to match buildroot's
defacto standard.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#3379
A good filesystem performance benchmark program
Signed-off-by: Martin Hicks <mort@bork.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This includes two separately configurable parition manipulation
utilities: gdsik and sgdisk are to GPT disks what fdisk and sfdisk are
in MBR land.
[Peter: patch source, fix typos, fix partial build, pass correct flags]
Signed-off-by: Malte Starostik <m-starostik@versanet.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
busybox and linux26 no longer have a -config target, and prepatch only makes
sense for a very specific configuration (BR toolchain with GDB enabled).
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#3571
The current approach for building fw_printenv for the target fails on
some configurations, so use the upstream make target (which works)
instead.
At the same time get rid of the unneeded stripping.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
ncurses 5.8 and 5.9 segfault with some applications so roll back to
version 5.7
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Depending on some setting (which? Arch? Others?), the dynamic linker
can get different names. Some times, it is named ld-linux.something.so,
other times, it is ld.so.1, and maybe other variants as well...
The fix is to always copy ls*.so, even if it is a symlink: we create
the destination file by its SONAME, and if ld*.so matches more than
one file, that's no issue, as they would all get the same SONAME (being
symlinks ones to the others).
Split long lines at the same time.
Reported-by: Ettore Campion <ecampion@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
proftpd refuses to start if it finds a UseIPv6 option in the configuration
file (even if set to off) when built without IPv6 support, so comment out
line.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump squid to version 3.1.12
Also disable strict error checking since this breaks with gcc 4.6.0+
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add new package: bwm-ng
Bandwidth Monitor NG is a small and console-based live network and
disk-io bandwidth monitor for Linux, BSD, Solaris, Mac OS X and others.
[Peter: move to net, fix Config.in line length, remove unused make var]
Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We have to ensure that the sysroot created while building the
toolchain will be the one we later search for libraries. So:
- hide the sysroot name prompt from the ct-ng menu.
- force the sysroot name to be 'sysroot'.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Changes made based upon e-mails with Mike Frysinger and Gerhard Heift. The
autoreconf change is important for anyone using uClibc as there is no widely
available backtrace (yet).
[Peter: fix Config.in indentation, autoreconf, patch]
Signed-off-by: Andy Kennedy <Andy.Kennedy@AdTran.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In the past, these files of the buildroot website weren't under git
version control, but rather were static files added to the git checkout
used by the webserver.
This is no longer the case, so add them to git - And at the same time
use the Buildroot logo for the favicon, rather than reusing the busybox
one.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Tremor needs the common ogg support (in _ogg_common.c) to get built,
similar to how it is done when libvorbis is used.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
qmake is built during the execution of Qt ./configure script, so it is
built just with a normal make, not taking advantage of parallel
compilation. Passing MAKEFLAGS=-j$(BR2_JLEVEL) allows to speed up the
qmake compilation process quite a bit.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since the conversion of Qt to GENTARGETS in
421cda1fd0, plugin installation could
break in some situations, for example if SQL support was enabled, but
without any SQL driver: the sql plugin directory doesn't exist, but
our qt.mk wanted to copy it.
This patches simplifies the plugin handling a bit, and basically
copies all Qt plugins installed in the $(STAGING_DIR) to the
$(TARGET_DIR), assuming Qt has only built and installed the needed
plugins.
Moreover, instead of installing plugins to usr/plugins, which is a odd
location, we install them in usr/lib/qt/plugins. This requires a small
patch to Qt ./configure script so that even when -hostprefix is used,
the -plugindir option is taken into account.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Enable correct driver for qemu's rtl8139 emulation (8139cp), enable
CONFIG_PACKET so DHCP works and enable 8250 driver for serial console.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes link issues on uClibc for applications using libreadline.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When ccache support is enabled and 'make silentoldconfig' is being
started from the following rule:
$(BUILD_DIR)/buildroot-config/auto.conf: $(CONFIG_DIR)/.config
$(MAKE) $(EXTRAMAKEARGS) HOSTCC="$(HOSTCC_NOCCACHE)" HOSTCXX="$(HOSTCXX_NOCCACHE)" silentoldconfig
then, the Makefile in package/config inherits from HOSTCC/HOSTCXX
values with the ccache prefix. However, if we start from a cleaned
build (after make clean), ccache is not compiled yet, so things break.
To solve this, we pass a noccache variant of HOSTCC/HOSTCXX down to
the package/config Makefile.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#3445.
OpenSSL emits bswap instructions when building for i386 targets which
unfortunately is only available on 486+ class processors.
Since the normal workaround is detected at build time and we are cross
compiling we need to specify this.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes for vulnerabilities CVE-2010-1674 and CVE-2010-1675.
Additional patches for build-time breakage of the new version.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump mpd server to version 0.6.12
Also make ffmpeg support conditional on IPv6 since the new ffmpeg
version requires it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This is useful for ARCHes like PowerPC that have a whole lot of
special targets for each different board. The kernel image target
tells make which OpenFirmware machine description file is combined into
the kernel binary.
[Peter: fix long lines]
Signed-Off-By: Martin Hicks <mort@bork.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Packages (like avahi) are now using libtool 2.4, so extend the libtool
handling to support those as well.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The current code accidentally sets up HOSTCC_NOCCACHE and HOSTCXX_NOCCACHE
only when the respective HOSTCC or HOSTCXX values are not set. So if you
do something like:
make HOSTCC=gcc menuconfig
The build fails because HOSTCC_NOCCACHE is not set anywhere.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Only prefix the external toolchain calls with its absolute path if
BR2_TOOLCHAIN_EXTERNAL_PATH is set, otherwise just assume it will
be available in the path.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In addition to converting the qt package to the GENTARGETS
infrastructure, this commit also does the following (related) things
in the Qt package:
* Create a BR2_PACKAGE_QT_CONFIG_FILE option, which can be used to
pass a custom Qt configuration file, such as the ones found in
src/corelib/global/qconfig-*.h. This used to be possible, but
required changing qt.mk directly, which isn't really how we
configure things in Buildroot.
* Remove the BR2_PACKAGE_QT_EMB_PLATFORM option, the embedded
platform name is now computed directly in qt.mk.
* The QT_CONFIGURE variable, which hosted all ./configure options,
has been renamed to QT_CONFIGURE_OPTS, for consistency with what we
do in the AUTOTARGETS infrastructure.
* The QT_DEP_LIBS variable has been renamed to QT_DEPENDENCIES, so
that dependencies are properly handled by the GENTARGETS
infrastructures.
* The QT_QMAKE_SET macro (used to adjust the path/flags of the
compiler/linker) has been extended with an additional argument,
which allows to pass the source directory of Qt.
* All the installation procedure has been rewritten to fit within the
GENTARGETS mechanism.
[Peter: fixed minor issues pointed out by Will]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Will Wagner <willw@carallon.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This shouldn't happen with any sane configuration, but is possible with
randpackageconfig builds, where it breaks the build as libgtk would prefer
X11 and webkit directfb, causing it to fail with:
No package 'gtk+-directfb-2.0' found
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
A few packages (like xlib_xtrans) install their .pc files here, and
upstream pkg-config defaults to searching both /usr/lib/pkgconfig and
/usr/share/pkgconfig, so add it as well.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Seems I somehow got this wrong back in December (bff5248202).
At the same time fix a typo in the comment.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The icu build system seems to have a race condition, which gets triggered
by high BR2_JLEVEL settings, so disable parallel builds.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Most alsa utilites depend on specific alsa-lib options, so ensure those
are selected. Arecord is furthermore just a symlink to aplay these days,
so get rid of the option.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The Debian package snapshot service moved to an official debian.org
address last year (http://www.debian.org/News/2010/20100412) with a
slightly different URL structure, so adjust the download URL to match.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#3475
There's no real reason to sync after creating the device nodes,
and it slows down the file system image creating quite a lot on
busy systems, so get rid of it.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
For packages where the sources are included in buildroot (E.G. makedevs).
We unfortunately already use no <pkg>_SOURCE to mean <pkg>_<version>.tar.gz,
in several packages (and for git/svn/bzr support), so you need to
define <pkg>_SOURCE to the empty string to use it.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
These patches do not build with more recent versions of uClibc
going back as far as at least 2008. More recent compiler versions
seem to do fine without these patches, so lets remove them so
libstdc++ locale support will actually build for gcc 4.2.4.
Signed-off-by: Will Newton <will.newton@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Only append sysroot to includedir / libdir, and not to other variables,
when a variable is requested (--variable=<name>), similar to how it
is done for the -I / -L flags in cflags/ldflags.
The problem is that pkg-config doesn't have any explicit cross compilation
support, so there's some confusion about what are host paths and what are
target ones. Includedir / libdir are paths for the (cross) compiler, so
those should normally have sysroot prepended, but other variables might
refer to target paths instead.
This fixes the installation of the xfonts-* packages, which uses
pkg-config --variable=fontrootdir fontutil to figure out the target
installation location for fonts.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
GNU config is now managed in git so we cannot use the old method
of doing a cvs up to get the latest changes.
Signed-off-by: Will Newton <will.newton@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
A similar patch appears to have been applied upstream.
Signed-off-by: Will Newton <will.newton@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add an option to use the system sqlite library.
Also drop sqlite2 stub since it's pointless.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
xz itself works without wchar support, but the C99 test in configure
fails when it isn't available. Fix it by providing a cached value for
the test.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Readd legacy LZMA support since older patched kernels might be using it.
Introduce an XZ target filesystem option for the new format.
[Peter: add a seperate xz target for squashfs-target as well]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
