Currently, we put all source archives side-by-side in the same
directory.
Since we're about to also save individual patches that were applied
on those sources, we don't want to make that directory a complete
mess of unassorted files.
So, we install each source archive in its own sub-directory, where
we'll later store the patches too. Store that location in a variable,
so it can be re-used later on (to install patches in a future commit).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When preparing the legal-info, the source archives are copied in the
legal-info/ output directory. When the archives are big, it can take
quite a bit of time and unnecessarily uses disk space. When the
legal-info output directory is on the same filesystem as the BR2_DL_DIR,
we can easily reduce copy time and disk usage by just using hardlins
instead of copying. However, the BR2_DL_DIR may be on a different
filesystem, so we must fallback to copying in this case
Introduce a helper script that copies a source file into a destination
directory, by first attempting to hard-link, and falling back to a
plain copy in case the hardlink fails.
In case the destination already exists, it is forcibly removed first, to
avoid clobering any existing target file (and especially any hardlink to
it), since cp -f does not remove the destination file, but clobbers it.
In some situations, it will be necessary that the destination file is
named differently than the source, so if a third argument is specified,
it is treated as the basename of the destination file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This change switches ARC tools to RC2 of the most recent arc-2016.03
version.
Essentially once final release is ready version will be bumped again.
ARC GNU tools of version arc-2016.03 bring some quite significant
changes like:
* Binutils v2.26+ (upstream commit id 202ac19 with additional ARC patches)
* GCC v4.8.5
* GDB 7.10
More about changes, improvements and fixes could be found here:
https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/releases/tag/arc-2016.03-rc2
Also in this change we realign custom Buildroot patches for binutils and
gcc for ARC tools. Looks like earlier most of arch-independent patches
for binutils and gcc were either unintentionally removed or not even
added in patch folders for ARC's binutils and gcc. Now arch-independent
patches for binutils-2.26 and gcc-4.8.5 were added in
package/{binutils|gcc}/arc-2016.03-rc2 folders.
Build and run-tested in nSIM for both ARC700 and ARC HS38.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
Fix GetNextToken() off by one error.
Check for buffer overflow in magick/draw.c/DrawStrokePolygon().
Remove support for internal ephemeral coder.
These are all related to the recent ImageTragick bundle that were
partially fixed in 6.9.3-10 as well.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Changed upstream URL to project site clamav.net, the tarball for the
new version is not available on sourceforge.net anymore.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It requires python and it's normally used at build time, hence since we
don't support toolchain in the target it really doesn't make much sense.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We should better use the final U-boot version rather than the release
candidate one.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add support for the rpi-0, which is basically a rpi (model A+) in a
smaller form-factor.
This one does not have an ethernet port, so we just remove it from the
configuration (or we could use the existing rasbperrypi_defconfig and
suffer from a longer boot time because of the waiting for eth0).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Although the current version of rpi-firmware we use is working just fine
on the rpi-zero, the latest firmware provides a DTB overlay to use the
USB OTG device in either host or slave modes.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2016-4553 - Cache Poisoning issue in HTTP Request handling
CVE-2016-4554 - Header Smuggling issue in HTTP Request processing
CVE-2016-4555 - Multiple Denial of Service issues in ESI Response
processing (client_side_request.cc)
CVE-2016-4556 - Multiple Denial of Service issues in ESI Response
processing (Esi.cc)
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As noticed by Romain Naour, commit
4d39ca1c2a ("toolchain-external: fix
installation for CodeSourcery AArch64 toolchain") has a small bug where
a post-install hook doing fixups in TARGET_DIR was registered as a
staging installation hook while it should have been registered as a
target installation hook. This commit fixes this inconsistency.
Reported-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Golang has significant improvements to support for multiarch in later
versions. This bump is required to make many go programs functional
under arm64, for example.
Signed-off-by: Christian Stewart <christian@paral.in>
Acked-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also:
* Update the .config file
* Update the help text:
- Lua support is not restricted to Lua 5.2
- U-Boot supports needs now BR2_PACKAGE_UBOOT_TOOLS additionally
* Remove comment about bundled lsqlite3, it has been removed.
* Remove upstream patches:
- "Kbuild: Fix link error for CONFIG_UBOUT and missing libz" [1]
- "Kbuild: Link with GCC instead of LD" [2]
* Add patch from upstream:
- "Fix build without MTD support" [3]
* Add optional dependency for libarchive
* Add optional dependency for uboot-tools
[1] 5a5ef5909f
[2] f26577423e
[3] 69c0e66994
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
[Thomas: add host-pkgconf in the dependency when Lua is enabled, as it
is used to find Lua.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The xorg server is somewhat sensitive to certain gcc versions combined
with -Os, particularly for ARM and MIPS, typically in the form of the
following symptom/error:
(EE) Segmentation fault at address 0x0
(EE)
Fatal server error:
(EE) Caught signal 11 (Segmentation fault). Server aborting
Force -O2 to work around this problem - for a target rootfs that uses
X11 the tradeoff is minimal since a sample/test image for qemu vexpress
with X11 + xinit + xterm + twm + xclock + gtk2 with demos is 60+ MB.
And it's less complicated than trying to find all of the bad
combinations.
Fixes bug #8436.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
[Thomas: add comment in .mk file, add reference to bug.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Barebox provides an option to embed a custom environment image into
barebox binary. This image will be used, when the environment found in
the environment sector is invalid. Both embedded and external images
can be used together, so having both options at the same time is
justified.
This patch sets barebox Kconfig option CONFIG_DEFAULT_ENVIRONMENT_PATH
to user specified path. This way one can use such BR's variables like
BR2_EXTERNAL, TOPDIR etc. to provide paths to custom environment
folders.
Cc: Pieter Smith <pieter@boesman.nl>
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
