mirror of
https://github.com/godotengine/buildroot.git
synced 2026-01-04 06:10:16 +03:00
1812ef5667
Beatify this genimage .cfg file to have consistency with all genimage .cfg files in Buildroot. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
********************* * MIPS Creator CI20 * ********************* Introduction ============ The 'ci20_defconfig' will create a root filesystem and a kernel image under the 'output/images/' directory. This document will try to explain how to use them in order to run Buildroot in the MIPS Creator CI20 board. How to build it =============== Configure Buildroot ------------------- $ make ci20_defconfig Build the rootfs ---------------- Note: you will need to have access to the network, since Buildroot will download the packages' sources. You may now build your rootfs with: $ make (This may take a while, consider getting yourself a coffee ;-) ) How to write the SD card ======================== Once the build process is finished you will have an image called "sdcard.img" in the output/images/ directory. Make sure the SD card is not mounted then copy the bootable "sdcard.img" onto it with "dd": $ sudo dd if=output/images/sdcard.img of=/dev/sdX Insert the SDcard into your ci20, and power it up. Your new system should come up now and start a console on the UART HEADER. see: https://elinux.org/CI20_Hardware#Dedicated_UART_header