Update for 2019.11.1

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
package/opencv3: security bump to version 3.4.9
2026-01-10 10:10:28 +03:00 · 2020-01-12 13:18:07 +01:00 · 2020-01-12 11:31:42 +01:00 · 2020-01-12 11:09:14 +01:00 · 2020-01-11 11:47:11 +01:00 · 2020-01-11 11:21:22 +01:00
4195 changed files with 37111 additions and 47024 deletions
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -54,12 +54,6 @@ check-package:
                tail -200 build.log
                exit 1
            }
-        - |
-            ./support/scripts/boot-qemu-image.py "${DEFCONFIG_NAME}" > >(tee runtime-test.log) 2>&1 || {
-                echo 'Failed runtime test last output'
-                tail -200 runtime-test.log
-                exit 1
-            }
    artifacts:
        when: always
        expire_in: 2 weeks
@@ -70,7 +64,6 @@ check-package:
            - output/build/build-time.log
            - output/build/packages-file-list.txt
            - output/build/*/.config
-            - runtime-test.log

 .defconfig:
    extends: .defconfig_base
@@ -168,7 +161,6 @@ beagleboardx15_defconfig: { extends: .defconfig }
 beaglebone_defconfig: { extends: .defconfig }
 beaglebone_qt5_defconfig: { extends: .defconfig }
 beagleboneai_defconfig: { extends: .defconfig }
-beelink_gs1_defconfig: { extends: .defconfig }
 chromebook_snow_defconfig: { extends: .defconfig }
 ci20_defconfig: { extends: .defconfig }
 csky_gx6605s_defconfig: { extends: .defconfig }
@@ -184,11 +176,9 @@ freescale_imx6dlsabresd_defconfig: { extends: .defconfig }
 freescale_imx6qsabreauto_defconfig: { extends: .defconfig }
 freescale_imx6qsabresd_defconfig: { extends: .defconfig }
 freescale_imx6sxsabresd_defconfig: { extends: .defconfig }
-freescale_imx6ullevk_defconfig: { extends: .defconfig }
 freescale_imx7dsabresd_defconfig: { extends: .defconfig }
 freescale_imx8mmevk_defconfig: { extends: .defconfig }
 freescale_imx8mqevk_defconfig: { extends: .defconfig }
-freescale_imx8qmmek_defconfig: { extends: .defconfig }
 freescale_imx8qxpmek_defconfig: { extends: .defconfig }
 freescale_p1025twr_defconfig: { extends: .defconfig }
 freescale_t1040d4rdb_defconfig: { extends: .defconfig }
@@ -226,16 +216,12 @@ mx6sx_udoo_neo_defconfig: { extends: .defconfig }
 mx6udoo_defconfig: { extends: .defconfig }
 nanopi_m1_defconfig: { extends: .defconfig }
 nanopi_m1_plus_defconfig: { extends: .defconfig }
-nanopi_neo4_defconfig: { extends: .defconfig }
 nanopi_neo_defconfig: { extends: .defconfig }
-nanopi_r1_defconfig: { extends: .defconfig }
 nexbox_a95x_defconfig: { extends: .defconfig }
 nitrogen6sx_defconfig: { extends: .defconfig }
 nitrogen6x_defconfig: { extends: .defconfig }
 nitrogen7_defconfig: { extends: .defconfig }
 nitrogen8m_defconfig: { extends: .defconfig }
-nitrogen8mm_defconfig: { extends: .defconfig }
-nitrogen8mn_defconfig: { extends: .defconfig }
 odroidxu4_defconfig: { extends: .defconfig }
 olimex_a10_olinuxino_lime_defconfig: { extends: .defconfig }
 olimex_a13_olinuxino_defconfig: { extends: .defconfig }
@@ -245,8 +231,6 @@ olimex_a20_olinuxino_micro_defconfig: { extends: .defconfig }
 olimex_a33_olinuxino_defconfig: { extends: .defconfig }
 olimex_a64_olinuxino_defconfig: { extends: .defconfig }
 olimex_imx233_olinuxino_defconfig: { extends: .defconfig }
-olpc_xo175_defconfig: { extends: .defconfig }
-olpc_xo1_defconfig: { extends: .defconfig }
 openblocks_a6_defconfig: { extends: .defconfig }
 orangepi_lite2_defconfig: { extends: .defconfig }
 orangepi_lite_defconfig: { extends: .defconfig }
@@ -312,11 +296,9 @@ raspberrypi2_defconfig: { extends: .defconfig }
 raspberrypi3_64_defconfig: { extends: .defconfig }
 raspberrypi3_defconfig: { extends: .defconfig }
 raspberrypi3_qt5we_defconfig: { extends: .defconfig }
-raspberrypi4_64_defconfig: { extends: .defconfig }
 raspberrypi4_defconfig: { extends: .defconfig }
 raspberrypi_defconfig: { extends: .defconfig }
 riotboard_defconfig: { extends: .defconfig }
-roc_pc_rk3399_defconfig: { extends: .defconfig }
 rock64_defconfig: { extends: .defconfig }
 roseapplepi_defconfig: { extends: .defconfig }
 s6lx9_microboard_defconfig: { extends: .defconfig }
@@ -330,10 +312,10 @@ snps_archs38_vdk_defconfig: { extends: .defconfig }
 socrates_cyclone5_defconfig: { extends: .defconfig }
 solidrun_clearfog_defconfig: { extends: .defconfig }
 solidrun_clearfog_gt_8k_defconfig: { extends: .defconfig }
-solidrun_macchiatobin_defconfig: { extends: .defconfig }
+solidrun_macchiatobin_mainline_defconfig: { extends: .defconfig }
+solidrun_macchiatobin_marvell_defconfig: { extends: .defconfig }
 stm32f429_disco_defconfig: { extends: .defconfig }
 stm32f469_disco_defconfig: { extends: .defconfig }
-stm32mp157a_dk1_defconfig: { extends: .defconfig }
 stm32mp157c_dk2_defconfig: { extends: .defconfig }
 toradex_apalis_imx6_defconfig: { extends: .defconfig }
 ts4900_defconfig: { extends: .defconfig }
@@ -343,17 +325,12 @@ wandboard_defconfig: { extends: .defconfig }
 warp7_defconfig: { extends: .defconfig }
 warpboard_defconfig: { extends: .defconfig }
 zynq_microzed_defconfig: { extends: .defconfig }
-zynq_qmtech_defconfig: { extends: .defconfig }
 zynq_zc706_defconfig: { extends: .defconfig }
 zynq_zed_defconfig: { extends: .defconfig }
 zynqmp_zcu106_defconfig: { extends: .defconfig }
 tests.boot.test_atf.TestATFAllwinner: { extends: .runtime_test }
 tests.boot.test_atf.TestATFMarvell: { extends: .runtime_test }
 tests.boot.test_atf.TestATFVexpress: { extends: .runtime_test }
-tests.boot.test_syslinux.TestSysLinuxX86EFI: { extends: .runtime_test }
-tests.boot.test_syslinux.TestSysLinuxX86LegacyBios: { extends: .runtime_test }
-tests.boot.test_syslinux.TestSysLinuxX86_64EFI: { extends: .runtime_test }
-tests.boot.test_syslinux.TestSysLinuxX86_64LegacyBios: { extends: .runtime_test }
 tests.core.test_file_capabilities.TestFileCapabilities: { extends: .runtime_test }
 tests.core.test_hardening.TestFortifyConserv: { extends: .runtime_test }
 tests.core.test_hardening.TestFortifyNone: { extends: .runtime_test }
@@ -389,8 +366,6 @@ tests.init.test_busybox.TestInitSystemBusyboxRoNet: { extends: .runtime_test }
 tests.init.test_busybox.TestInitSystemBusyboxRw: { extends: .runtime_test }
 tests.init.test_busybox.TestInitSystemBusyboxRwNet: { extends: .runtime_test }
 tests.init.test_none.TestInitSystemNone: { extends: .runtime_test }
-tests.init.test_openrc.TestInitSystemOpenrcRoFull: { extends: .runtime_test }
-tests.init.test_openrc.TestInitSystemOpenrcRwFull: { extends: .runtime_test }
 tests.init.test_systemd.TestInitSystemSystemdRoFull: { extends: .runtime_test }
 tests.init.test_systemd.TestInitSystemSystemdRoIfupdown: { extends: .runtime_test }
 tests.init.test_systemd.TestInitSystemSystemdRoNetworkd: { extends: .runtime_test }
@@ -398,15 +373,10 @@ tests.init.test_systemd.TestInitSystemSystemdRwFull: { extends: .runtime_test }
 tests.init.test_systemd.TestInitSystemSystemdRwIfupdown: { extends: .runtime_test }
 tests.init.test_systemd.TestInitSystemSystemdRwNetworkd: { extends: .runtime_test }
 tests.package.test_atop.TestAtop: { extends: .runtime_test }
-tests.package.test_crudini.TestCrudiniPy2: { extends: .runtime_test }
-tests.package.test_crudini.TestCrudiniPy3: { extends: .runtime_test }
 tests.package.test_docker_compose.TestDockerCompose: { extends: .runtime_test }
 tests.package.test_dropbear.TestDropbear: { extends: .runtime_test }
 tests.package.test_glxinfo.TestGlxinfo: { extends: .runtime_test }
-tests.package.test_gst1_python.TestGst1Python: { extends: .runtime_test }
 tests.package.test_ipython.TestIPythonPy3: { extends: .runtime_test }
-tests.package.test_libftdi1.TestPythonPy2Libftdi1: { extends: .runtime_test }
-tests.package.test_libftdi1.TestPythonPy3Libftdi1: { extends: .runtime_test }
 tests.package.test_lpeg.TestLuaLPeg: { extends: .runtime_test }
 tests.package.test_lpeg.TestLuajitLPeg: { extends: .runtime_test }
 tests.package.test_lsqlite3.TestLuaLsqlite3: { extends: .runtime_test }
@@ -421,8 +391,6 @@ tests.package.test_lua_gd.TestLuaLuaGD: { extends: .runtime_test }
 tests.package.test_lua_gd.TestLuajitLuaGD: { extends: .runtime_test }
 tests.package.test_lua_http.TestLuaHttp: { extends: .runtime_test }
 tests.package.test_lua_http.TestLuajitHttp: { extends: .runtime_test }
-tests.package.test_lua_lyaml.TestLuaLuaLyaml: { extends: .runtime_test }
-tests.package.test_lua_lyaml.TestLuajitLuaLyaml: { extends: .runtime_test }
 tests.package.test_lua_sdl2.TestLuaLuaSDL2: { extends: .runtime_test }
 tests.package.test_lua_sdl2.TestLuajitLuaSDL2: { extends: .runtime_test }
 tests.package.test_lua_utf8.TestLuaUtf8: { extends: .runtime_test }
@@ -442,21 +410,16 @@ tests.package.test_luasocket.TestLuajitLuaSocket: { extends: .runtime_test }
 tests.package.test_luasyslog.TestLuaLuasyslog: { extends: .runtime_test }
 tests.package.test_luasyslog.TestLuajitLuasyslog: { extends: .runtime_test }
 tests.package.test_luvi.TestLuvi: { extends: .runtime_test }
-tests.package.test_lxc.TestLxc: { extends: .runtime_test }
 tests.package.test_lzlib.TestLuaLzlib: { extends: .runtime_test }
-tests.package.test_netdata.TestNetdata: { extends: .runtime_test }
 tests.package.test_openjdk.TestOpenJdk: { extends: .runtime_test }
-tests.package.test_opkg.TestOpkg: { extends: .runtime_test }
 tests.package.test_perl.TestPerl: { extends: .runtime_test }
 tests.package.test_perl_class_load.TestPerlClassLoad: { extends: .runtime_test }
 tests.package.test_perl_dbd_mysql.TestPerlDBDmysql: { extends: .runtime_test }
 tests.package.test_perl_encode_detect.TestPerlEncodeDetect: { extends: .runtime_test }
 tests.package.test_perl_gdgraph.TestPerlGDGraph: { extends: .runtime_test }
-tests.package.test_perl_html_parser.TestPerlHTMLParser: { extends: .runtime_test }
 tests.package.test_perl_io_socket_multicast.TestPerlIOSocketMulticast: { extends: .runtime_test }
 tests.package.test_perl_io_socket_ssl.TestPerlIOSocketSSL: { extends: .runtime_test }
 tests.package.test_perl_libwww_perl.TestPerllibwwwperl: { extends: .runtime_test }
-tests.package.test_perl_lwp_protocol_https.TestPerlLWPProtocolhttps: { extends: .runtime_test }
 tests.package.test_perl_mail_dkim.TestPerlMailDKIM: { extends: .runtime_test }
 tests.package.test_perl_x10.TestPerlX10: { extends: .runtime_test }
 tests.package.test_perl_xml_libxml.TestPerlXMLLibXML: { extends: .runtime_test }
@@ -468,14 +431,12 @@ tests.package.test_python_argh.TestPythonPy2Argh: { extends: .runtime_test }
 tests.package.test_python_argh.TestPythonPy3Argh: { extends: .runtime_test }
 tests.package.test_python_attrs.TestPythonPy2Attrs: { extends: .runtime_test }
 tests.package.test_python_attrs.TestPythonPy3Attrs: { extends: .runtime_test }
+tests.package.test_python_autobahn.TestPythonPy2Autobahn: { extends: .runtime_test }
 tests.package.test_python_autobahn.TestPythonPy3Autobahn: { extends: .runtime_test }
 tests.package.test_python_automat.TestPythonPy2Automat: { extends: .runtime_test }
 tests.package.test_python_automat.TestPythonPy3Automat: { extends: .runtime_test }
-tests.package.test_python_avro.TestPythonAvro: { extends: .runtime_test }
 tests.package.test_python_bitstring.TestPythonPy2Bitstring: { extends: .runtime_test }
 tests.package.test_python_bitstring.TestPythonPy3Bitstring: { extends: .runtime_test }
-tests.package.test_python_can.TestPythonPy2Can: { extends: .runtime_test }
-tests.package.test_python_can.TestPythonPy3Can: { extends: .runtime_test }
 tests.package.test_python_cbor.TestPythonPy2Cbor: { extends: .runtime_test }
 tests.package.test_python_cbor.TestPythonPy3Cbor: { extends: .runtime_test }
 tests.package.test_python_click.TestPythonPy2Click: { extends: .runtime_test }
@@ -485,10 +446,6 @@ tests.package.test_python_constantly.TestPythonPy3Constantly: { extends: .runtim
 tests.package.test_python_crossbar.TestPythonPy3Crossbar: { extends: .runtime_test }
 tests.package.test_python_cryptography.TestPythonPy2Cryptography: { extends: .runtime_test }
 tests.package.test_python_cryptography.TestPythonPy3Cryptography: { extends: .runtime_test }
-tests.package.test_python_django.TestPythonPy3Django: { extends: .runtime_test }
-tests.package.test_python_gitdb2.TestPythonPy2Gitdb2: { extends: .runtime_test }
-tests.package.test_python_gitdb2.TestPythonPy3Gitdb2: { extends: .runtime_test }
-tests.package.test_python_gobject.TestPythonPy3Gobject: { extends: .runtime_test }
 tests.package.test_python_incremental.TestPythonPy2Incremental: { extends: .runtime_test }
 tests.package.test_python_incremental.TestPythonPy3Incremental: { extends: .runtime_test }
 tests.package.test_python_passlib.TestPythonPy2Passlib: { extends: .runtime_test }
@@ -501,13 +458,12 @@ tests.package.test_python_pyyaml.TestPythonPy2Pyyaml: { extends: .runtime_test }
 tests.package.test_python_pyyaml.TestPythonPy3Pyyaml: { extends: .runtime_test }
 tests.package.test_python_service_identity.TestPythonPy2ServiceIdentity: { extends: .runtime_test }
 tests.package.test_python_service_identity.TestPythonPy3ServiceIdentity: { extends: .runtime_test }
-tests.package.test_python_smmap2.TestPythonPy2Smmap2: { extends: .runtime_test }
-tests.package.test_python_smmap2.TestPythonPy3Smmap2: { extends: .runtime_test }
 tests.package.test_python_subprocess32.TestPythonPy2Subprocess32: { extends: .runtime_test }
 tests.package.test_python_treq.TestPythonPy2Treq: { extends: .runtime_test }
 tests.package.test_python_treq.TestPythonPy3Treq: { extends: .runtime_test }
 tests.package.test_python_twisted.TestPythonPy2Twisted: { extends: .runtime_test }
 tests.package.test_python_twisted.TestPythonPy3Twisted: { extends: .runtime_test }
+tests.package.test_python_txaio.TestPythonPy2Txaio: { extends: .runtime_test }
 tests.package.test_python_txaio.TestPythonPy3Txaio: { extends: .runtime_test }
 tests.package.test_python_txtorcon.TestPythonPy2Txtorcon: { extends: .runtime_test }
 tests.package.test_python_txtorcon.TestPythonPy3Txtorcon: { extends: .runtime_test }
--- a/.gitlab-ci.yml.in
+++ b/.gitlab-ci.yml.in
@@ -54,12 +54,6 @@ check-package:
                tail -200 build.log
                exit 1
            }
-        - |
-            ./support/scripts/boot-qemu-image.py "${DEFCONFIG_NAME}" > >(tee runtime-test.log) 2>&1 || {
-                echo 'Failed runtime test last output'
-                tail -200 runtime-test.log
-                exit 1
-            }
    artifacts:
        when: always
        expire_in: 2 weeks
@@ -70,7 +64,6 @@ check-package:
            - output/build/build-time.log
            - output/build/packages-file-list.txt
            - output/build/*/.config
-            - runtime-test.log

 .defconfig:
    extends: .defconfig_base
--- a/509
+++ b/509
@@ -1,348 +1,3 @@
-2020.05-rc1, released May 7th 2020
-
-	Addition of support for gobject-introspection: both the
-	gobject-introspection package itself, but also introspection
-	support was enabled in a number of other packages.
-
-	Support for Qt 5.6 was dropped as its support was dropped
-	upstream, only one version of Qt is supported at the moment:
-	Qt 5.14.2.
-
-	Addition of support for the apparmor Linux security module, by
-	adding the necessary user-space packages.
-
-	Addition of a qmake package infrastructure, now used by most
-	Qt-related packages.
-
-	The Luarocks package infrastructure has been extended to
-	support build host packages.
-
-	The package infrastructure was improved to allow each package
-	to indicate the Linux kernel configuration options it needs.
-
-	Addition of support for generating filesystem images using the
-	EROFS filesystem.
-
-	The logic that calculates the list of files installed by each
-	package was reworked to be compatible with the top-level
-	parallel build functionality.
-
-	Addition of a package for a pre-compiled ARM32 bare-metal
-	toolchain, which can be used to build ARM32 code in ARM64
-	configurations, such as firmware/bootloader code.
-
-	The Qemu defconfigs are now boot-tested in Qemu as part of the
-	Gitlab continuous integration.
-
-	Toolchain: gcc 9.x bumped to 9.3.0, gcc 8.x bumped to 8.4.0,
-	gdb bumped to 8.3.1.
-
-	New packages: apcupsd, apparmor, arm-gnu-a-toolchain, bearssl,
-	belle-sip, belr, cage, chartjs, erofs-utils, exfatprogs,
-	gobject-introspection, ibm-sw-tpm2, imx-seco, jbig2dec,
-	libapparmor, libiberty, libfuse3, libtextstyle, libudfread,
-	libuhttpd, libuwsc, lua-lyaml, matio, mbuffer, netdata,
-	openfpgaloader, perl-i18n, perl-locale-maketext-lexicon,
-	perl-lwp-protocol-https,
-	perl-mojolicious-plugin-authorization,
-	perl-mojolicious-plugin-cspheader,
-	perl-mojolicious-plugin-i18n,
-	perl-mojolicious-plugin-securityheader, perl-mozilla-ca,
-	perl-path-class, pistache, pkcs11-helper, prelink-cross,
-	python-argon2-cffi, python-canopen, python-cbor2,
-	python-filelock, python-flatbuffers, python-greenlet,
-	python-modbus-tk, python-pyalsa, python-pysftp, python-regex,
-	python-snappy, rtty, tinyproxy, udev-gentoo-scripts, unbound,
-	vuejs, wlroots.
-
-	New defconfigs: freescale_imx6ullevk, freescale_imx8qmmek,
-	nanopi_neo4, nanopi_r1, nitrogen8mm, nitrogen8mn, olpc_xo1,
-	olpc_xo175, roc_rk3399_pc, stm32mp157a_dk1, zynq_qmtech
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#10386: Add an option to put all compiled executables that
-		show up on target/ in staging/ as well
-	#11866: iniramfs file system fails to boot using  Grub on EFI x86_64
-	#12666: Doesn't pick up a custom bash profile
-	#12696: Uboot 2020.01 Problem loading Linux kernel  on Nano PI NEO
-	#12701: [patch] wpa_supplicant must depend on  openssl
-	#12711: host-localedef 2.30-20 fails to compile on  fedora 32 (gcc 10.0.1)
-	#12716: bio.h not found
-	#12726: systemctl preset-all failed for	 ctrl-alt-del.target
-	#12731: rtl8188eu not buildung for banana pi M1	 (glib, systemd, 4.18.12)
-	#12746: "sysdig" package description points to
-		http://sysdig.org, which bounces to malware site
-	#12751: OpenJdk package installation issues on	target
-	#12796: Update OpenSSL to Version 1.1.1g to patch  CVE-2020-1967
-	#12811: bootstrap stuck and no login prompt
-
-2020.02.1, released April 10th, 2020
-
-	Important / security related fixes.
-
-	core: Also fixup /lib references in libtool .la files, similar
-	to how it is done for /usr/*.
-
-	Various fixes for builds with per-package target/host
-	directories.
-
-	toolchain: Fix kernel headers validation check for external
-	toolchains. Fix make 4.3+ compatibility in external toolchain
-	logic.
-
-	fs/initramfs: fix show-info so it also shows the usual
-	rootfs-related variables.
-
-	Updated/fixed packages: arm-trusted-firmware, barebox-aux,
-	bluez5_utils, bubblewrap, busybox, civetweb, cog, collectd,
-	ffmpeg, gcc, gnutls, gssdp, gvfs, haproxy, hiredis, hostapd,
-	kmscube, kodi-screensaver-rsxs, libical, libinput, libexif,
-	libopenssl, libsndfile, linux, linux-tools, llvm, localedef,
-	mcrypt, mesa3d, meson, monit, nftables, ntp, opencv3,
-	oprofile, php, pinentry, polkit, pure-ftpd, python-pyyaml,
-	qt5, quagga, radvd, rcw, redis, rocksdb, samba4, screen,
-	sdbusplus, swupdate, sysdig, sysklogd, syslinux, syslog-ng,
-	tor, tslib, uacme, util-linux, vala, vlc,
-	wireguard-linux-compat, wireguard-tools, wireshark,
-	wpa_supplicant, xserver_xorg-server
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#12711: host-localedef 2.30-20 fails to compile on fedora 32
-	#12746: "sysdig" package description points to http://sysdig.org, ..
-
-2020.02, released March 8th, 2020
-
-	Various fixes.
-
-	br2-external: Fix compatibility with make 4.3+
-
-	Updated/fixed packages: bash, bcm2835, binutils, cups,
-	erlang-p1-acme, fbgrab, gr-osmosdr, gst1-plugins-base,
-	gst1-validate, gstreamer1, guile, jhead, libdrm, libevdev,
-	libinput, libnss, libsndfile, libvncserver, linux-firmware,
-	mesa3d, nodejs, openjdk-bin, openvmtools, optee-test, patch,
-	php, piglit, pppd, python-django, qemu, qt5base, ruby,
-	ser2net, swupdate, thrift, zziplib
-
-	Removed packages: classpath, jamvm
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#12606: fbgrab location has changed
-
-2020.02-rc3, released March 2nd, 2020
-
-	Fixes all over the tree.
-
-	Infrastructure: Rework file list handling to fix race
-	conditions when building with per-package target and host
-	directories and top-level parallel builds.
-
-	Updated/fixed packages: aufs, binutils, blktrace, brltty,
-	cairo, dnsmasq, docker-compose, elf2flt, exim, exiv2, git,
-	kodi-inputstream-adaptive, libarchive, libcgroup, libgdiplus,
-	libssh2, libvncserver, libvorbis, linknx, linux-firmware, lxc,
-	lz4, mosquitto, openjpeg, openrc, poco, proftpd, pure-ftpd,
-	python3, python-multidict, python-setuptools-scm-git-archive,
-	qpdf, qt5tools, rdesktop, rocksdb, shellinabox, squid,
-	suricata, swig, systemd, taglib, util-linux, wireshark, zsh
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#12571: ltp-testsuite : Build failure
-	#12576: 2020.02-RC1: error while loading shared libraries: ...
-	#12581: 2020.02-rc1 glibc failing to build on fedora 31
-
-2020.02-rc2, released February 26th, 2020
-
-	Fixes all over the tree.
-
-	Toolchain: Ensure strong SSP can only be enabled if the
-	(external) toolchain supports it.
-
-	Fix a race condition related to creating the output/staging
-	symlink on systems with coreutils < 8.27.
-
-	Drop support for the (end of life) Qt 5.6 variant.
-
-	Updated/fixed packages: at, armadillo, audiofile, bash,
-	busybox, erlang, fail2ban, fluidsynth, ipsec-tools, jpeg-turbo,
-	kvm-unit-tests, libftdi1, libinput, libsvgtiny, libtomcrypt,
-	libupnpp, libxml2, linux-tools, luv, mbedtls, mesa3d, minicom,
-	openvmtools, php, qt5, qt5webengine, qwt, radvd, rcw,
-	sdbusplus, systemd, tpm2-tss, vorbis-tools
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#12581: 2020.02-rc1 glibc failing to build on fedora 31
-
-2020.02-rc1, released February 18th, 2020
-
-	Fixes all over the tree and new features.
-
-	Add experimental support for building with a per-package
-	target and host directory. This still has some rough edges,
-	but brings a number of advantages:
-
-	- Packages will only be able to access the explicitly listed
-          dependencies and not any other packages that happen to be
-          built before, ensuring correct dependency information in
-          Buildroot.
-
-	- Possibility for top-level parallel builds, speeding up
-          builds on multicore machines.
-
-	Core: Ensure package-file-lists data is correct after
-	incremental builds as well.
-
-	Architecture: Add support for ARC-HS38 with 64bit multiplier
-	variant, allow building glibc for big endian ARC, handle 16KB
-	MMU page size for ARC in toolchain wrapper.
-
-	Toolchain: Add binutils 2.33.1, GCC 7.5.0, Arm 9.2-2019.12
-	toolchains, ARC 2019.09 toolchain. Allow using custom kernel
-	headers newer than what is known by Buildroot.
-
-	pkg-stats: Support for CVE vulnerability reporting by
-	comparing to NVD database.
-
-	Reproducible builds: The go -trimpath option is now used to
-	get rid of absolute build paths, __FILE__ and __BASE_FILE__
-	defines are now handled in the toolchain wrapper.
-
-	Systemd: Build host variant and use systemctl to automatically
-	enable unit files rather than manually managing symlinks.
-
-	Util-linux: Ensure that hwclock is built without GPLv3
-	code. Notice that builds with hwclock has contained
-	GPLv3-licensed code since util-linux 2.30 (Buildroot 2017.08+)
-
-	New defconfigs: Beelink GS1, Raspberrypi4 64bit
-
-	New packages: alura, avro-c, bubblewrap, cctz, cereal,
-	cpuburn-arm, elixir, erlang-base64url, erlang-idna,
-	erlang-jose, erlang-p1-acme, erlang-p1-mqtree,
-	erlang-p1-yconf, fluid-soundfont, fluidsynth, gcnano-binaries,
-	gensio, glslsandbox-player, libargon2, libmodsecurity,
-	libpam-nfc, libtelnet, lua-codegen, lua-livr, lua-livr-extra,
-	lua-rotas, lua-silva, mfoc, network-manager-openvpn,
-	nginx-modsecurity, perl-crypt-openssl-aes,
-	perl-math-prime-util, pipewire, ptm2human, python-aenum,
-	python-aiohttp-debugtoolbar, python-aiohttp-mako,
-	python-aiologstash, python-aiosignal, python-aiozipkin,
-	python-async-lru, python-avro, python-bunch, python-crontab,
-	python-dnspython, python-entrypoints, python-esptool,
-	python-frozenlist, python-future, python-gitdb, python-janus,
-	python-lockfile, python-logstash, python-nested-dict,
-	python-pbr, python-pyaes, python-pydantic, python-smmap2,
-	python-sockjs, python-zc-lockfile, raspi-gpio, rocksdb,
-	sdbusplus, spidermonkey, thermald, ti-sgx-libgbm, tinyssh,
-	tio, umtprd, weston-imx, wireguard-linux-compat,
-	wireguard-tools, xdg-dbus-proxy
-
-	Removed packages: bluez_utils, celt051, erlang-p1-iconv, fis,
-	gadgetfs-test, libplayer, gstreamer, gst-ffmpeg,
-	gst-fsl-plugins, gst-omapfb, gst-plugins-bad,
-	gst-plugins-base, gst-plugins-good, gst-plugins-ugly,
-	perl-digest-md5, perl-mime-base64, perl-net-ping,
-	python-scapy3k, wireguard
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#11906: the new version of mesa3d cannot support etnaviv when..
-	#11996: opencv3 SIGILL on Cortex-A5 with VFPv4-D16
-	#12121: PyQt5.QtSerialPort and other modules not being built
-	#12256: package tar is outdated (1.29 is 3 years old
-	#12286: Can't import gobject in python 3.8
-	#12376: python-scapy3k is deprecated
-	#12386: carriage return issue when "make menuconfig"
-	#12441: qt5webengine build error: asm/errno.h: No such file or..
-	#12446: Buildroot fails to finish installing packages
-	#12456: qtvirtualkeyboard: No such file or directory
-	#12461: libglib2 build files with deep directory structure
-	#12481: minicom fails when output directory path contains "m4"
-	#12501: libnss-3.49.1: ld error: multiple definition of `gcm_..
-	#12526: host-nodejs 12.14.1: configure fail: AttributeError: ..
-	#12536: Linux-Headers extracting failure
-	#12546: Ninja 1.10 build Error
-
-2019.11.3, released April 10th, 2020
-
-	Important / security related fixes.
-
-	core: Fix compatibility with make 4.3+. Also fixup /lib
-	references in libtool .la files, similar to how it is done for
-	/usr/*.
-
-	toolchain: Fix kernel headers validation check for external
-	toolchains.
-
-	fs/initramfs: fix show-info so it also shows the usual
-	rootfs-related variables.
-
-	Updated/fixed packages: barebox-aux, bluez5_utils, busybox,
-	civetweb, cog, collectd, ffmpeg, gcc, gnutls, gssdp, gvfs, haproxy,
-	hiredis, hostapd, kmscube, libical, libopenssl, libsndfile,
-	linux-tools, llvm, monit, ntp, php, pure-ftpd, radvd, redis,
-	samba4, screen, sysdig, syslinux, syslog-ng, tor, uacme,
-	util-linux, vala, vlc, wpa_supplicant, xserver_xorg-server
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#12746: "sysdig" package description points to http://sysdig.org, ..
-
-2019.11.2, released March 16th, 2020
-
-	Important / security related fixes.
-
-	Core: Ensure package-file-lists data is correct after
-	incremental builds as well.
-
-	Fix a race condition related to creating the output/staging
-	symlink on systems with coreutils < 8.27.
-
-	Toolchain: ARC tools bumped to arc-2019.09.
-
-	Br2-external: Fix patch handling when external linux-extension
-	packages are used. Fix compatibility with make 4.3+
-
-	Util-linux: Ensure that hwclock is built without GPLv3
-	code. Notice that builds with hwclock has contained
-	GPLv3-licensed code since util-linux 2.30 (Buildroot 2017.08+)
-
-	Updated/fixed packages: armadillo, at, bcm2835, binutils,
-	blktrace, bluez-alsa, bootstrap, brltty, busybox, cairo,
-	clamav, cog, cups, czmq, dnsmasq, docker-containerd, dovecot,
-	dovecot-pigeonhole, e2fsprogs, elf2flt, eudev, exim, exiv2,
-	fbgrab, gettext-tiny, glibc, go, grep, gst1-validate, guile,
-	imagemagick, jhead, jpeg-turbo, kvm-unit-tests, lapack,
-	libarchive, libcgroup, libdrm, libevent, libexif, libftdi1,
-	libgdiplus, libjpeg, libsigrok, libsndfile, libssh2,
-	libsvgtiny, libvncserver, libvorbis, libxml2, libxslt, linknx,
-	lxc, lz4, mariadb, mbedtls, meson, mongoose, mosquitto, musl,
-	ncurses, nodejs, ntfs-3g, ogre, opencv3, openjdk, openjpeg,
-	openrc, openswan, openvmtools, optee-test, patch, php, piglet,
-	postgresql, pppd, proftpd, pure-ftpd, python-django,
-	python-pyqt5, python-setuptools-scm-git-archive, python3,
-	qemu, qt5base, qt5tools, qt5virtualkeyboard, qt5webengine,
-	qwt, rdesktop, ruby, runc, samba4, shellinabox,
-	skeleton-init-openrc, smartmontools, spdlog, sqlcipher, squid,
-	suricata, swig, swupdate, sysklogd, taglib, thrift,
-	ti-cgt-pru, uclibc, util-linux, vorbis-tools, webkitgtk,
-	wireshark, wpebackend-fdo, wpewebkit, xen,
-	xserver_xorg-server, zeromq, zsh, zziplib
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#11996: opencv3 SIGILL on Cortex-A5 with VFPv4-D16
-	#12331: meson issue
-	#12456: qtvirtualkeyboard: No such file or directory
-	#12461: libglib2 build files with deep directory structure
-	#12481: minicom fails when output directory path contains "m4"
-	#12606: fbgrab location has changed
-
 2019.11.1, released January 12th, 2020

 	Important / security related fixes.
@@ -551,47 +206,6 @@
 	#12276: make clean/distclean does not remove BR2_DL_DIR and BR2_HOST_DIR
 	#12281: Custom configuration fails to build (based on raspberrypi3_..

-2019.08.3, released December 7th, 2019
-
-	Important / security related fixes.
-
-	Infrastructure: Make HOST_<pkg>_DL_OPTS inherit from
-	<pkg>_DL_OPTS by default, just like it is done for a number of
-	other package variables
-
-	Add <pkg>_KEEP_PY_FILES to exclude specific python .py files
-	from the removal done by BR2_PACKAGE_PYTHON{,3}_PYC_ONLY for
-	the (rare) case where the .py files are needed at runtime
-	rather than .pyc.
-
-	Fix <pkg>-reconfigure handling for packages using the kconfig
-	infrastructure.
-
-	Toolchain: ensure external toolchain kernel headers version
-	check correctly stop the build on mismatch
-
-	Deconfigs: beaglebone: fix boot issue
-
-	Updated/fixed packages: am33x-cm3, asterisk, bind, chrony,
-	clamav, cmocka, collectd, connman, dhcp, dropwatch, faifa,
-	gettext-tiny, gob2, haproxy, intel-microcode, ipsec-tools,
-	jailhouse, jasper, jpeg-turbo, kodi, kvm-unit-tests, libftdi,
-	libftdi1, libnss, libressl, libstrophe, libsvgtiny, lvm2,
-	lzma, mariadb, minicom, mosquitto, neardal, ninja, nodejs,
-	oniguruma, openvmtools, oracle-mysql, perl-gdgraph,
-	perl-gdtextutil, php, postgresql, prosody, python-cchardet,
-	python-django, qt5wayland, rabbitmq, rauc, redis, rpcbind,
-	socat, spice, spice-protocol, tftpd, tiff, webkitgtk
-
-	New packages: libmspack
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#12166: Compiling nodejs for SAMA5D3 always crash with illegal inst..
-	#12171: Python-opencv needs config.py and config-3.7.py to run..
-	#12211: host-nodejs 10.15.3 package fail to build
-	#12316: tzdata fails to install with empty "default local time"
-
 2019.08.2, released November 9th, 2019

 	Important / security related fixes.
@@ -1040,129 +654,6 @@
 	#11761: Building custom kernel 5.1-rc3 or later breaks on objtool
 	#11816: Only selected coreutils binaries are installed

-2019.02.11, released April 9th, 2020
-
-	Important / security related fixes.
-
-	core: Fix compatibility with make 4.3+. Also fixup /lib
-	references in libtool .la files, similar to how it is done for
-	/usr/*.
-
-	toolchain: Fix kernel headers validation check for external
-	toolchains.
-
-	Updated/fixed packages: barebox-aux, bluez5_utils, busybox,
-	civetweb, collectd, ffmpeg, gcc, gnutls, gvfs, haproxy,
-	hiredis, kmscube, libical, libopenssl, libsndfile,
-	linux-tools, ntp, php, pure-ftpd, screen, sysdig, tor,
-	util-linux, vala, vlc, xserver_xorg-server
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#12746: "sysdig" package description points to http://sysdig.org, ..
-
-2019.02.10, released March 16th, 2020
-
-	Important / security related fixes.
-
-	Core: Ensure package-file-lists data is correct after
-	incremental builds as well.
-
-	Fix a race condition related to creating the output/staging
-	symlink on systems with coreutils < 8.27.
-
-	Br2-external: Fix compatibility with make 4.3+
-
-	Util-linux: Ensure that hwclock is built without GPLv3
-	code. Notice that builds with hwclock has contained
-	GPLv3-licensed code since util-linux 2.30 (Buildroot 2017.08+)
-
-	Updated/fixed packages: armadillo, at, binutils, blktrace,
-	bootstrap, busybox, cairo, cups, czmq, dnsmasq,
-	docker-containerd, dovecot, dovecot-pigeonhole, e2fsprogs,
-	eudev, exim, exiv2, fbgrab, grep, gst1-validate, guile,
-	imagemagick, jhead, kvm-unit-tests, lapack, libcgroup,
-	libftdi1, libjpeg, libsigrok, libsndfile, libssh2, libsvgtiny,
-	libvncserver, libvorbis, libxml2, libxslt, linux, lz4,
-	mariadb, mbedtls, meson, mfgtools, mongoose, ncurses, ntfs-3g,
-	opencv3, openjpeg, openswan, openvmtools, patch, php,
-	postgresql, pppd, proftpd, pure-ftpd, python-django,
-	python-pyqt5, python3, qemu, qt5base, qt5webengine, qwt,
-	rdesktop, ruby, runc, samba4, shellinabox, smartmontools,
-	sqlcipher, squid, swupdate, sysklogd, taglib, thrift,
-	ti-cgt-pru, uboot, util-linux, vorbis-tools, webkitgtk,
-	wireshark, xen, xserver_xorg-server, zeromq, zsh
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#11996: opencv3 SIGILL on Cortex-A5 with VFPv4-D16
-	#12331: meson issue
-	#12461: libglib2 build files with deep directory structure
-	#12606: fbgrab location has changed
-
-2019.02.9, released January 12th, 2020
-
-	Important / security related fixes.
-
-	pkg-python infrastructure: Ensure correct compiler and linker
-	flags are used for compiled code
-
-	utils/scanpypi: Remind users to update DEVELOPERS
-
-	Updated/fixed packages: busybox, cc-tool, cpio, cups, dante,
-	dillo, docker-cli, docker-containerd, docker-engine, easy-rsa,
-	ecryptfs-utils, efl, git, glibc, gnupg2, gst1-plugins-bad,
-	kf5-kcoreaddons, libarchive, libgit2, libkrb5, librsvg,
-	libssh, libtomcrypt, libuio, lirc-tools, lvm2,
-	matchbox-desktop, nodejs, ntp, opencv3, openpowerlink,
-	python-django, python-ecdsa, python-pyasn-modules,
-	python-pyqt5, python-subprocess32, python3, qpdf, runc, rygel,
-	samba4, sdl2, wavpack, xserver_xorg-server, zip
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#12121: PyQt5.QtSerialPort and other modules not being built
-
-2019.02.8, released December 7th, 2019
-
-	Important / security related fixes.
-
-	Infrastructure: Make HOST_<pkg>_DL_OPTS inherit from
-	<pkg>_DL_OPTS by default, just like it is done for a number of
-	other package variables
-
-	Add <pkg>_KEEP_PY_FILES to exclude specific python .py files
-	from the removal done by BR2_PACKAGE_PYTHON{,3}_PYC_ONLY for
-	the (rare) case where the .py files are needed at runtime
-	rather than .pyc.
-
-	Fix <pkg>-reconfigure handling for packages using the kconfig
-	infrastructure.
-
-	Toolchain: ensure external toolchain kernel headers version
-	check correctly stop the build on mismatch
-
-	Deconfigs: beaglebone: fix boot issue
-
-	Updated/fixed packages: am33x-cm3, asterisk, bind, chrony,
-	clamav, collectd, connman, faifa, gob2, haproxy,
-	intel-microcode, ipsec-tools, jasper, jpeg-turbo, kodi,
-	kvm-unit-tests, libftdi, libftdi1, libnss, libstrophe,
-	libsvgtiny, lvm2, lzma, mariadb, minicom, neardal, nodejs,
-	opencv3, openvmtools, oracle-mysql, perl-gdgraph,
-	perl-gdtextutil, php, postgresql, prosody, python-django,
-	rabbitmq-c, rauc, redis, rpcbind, socat, spice,
-	spice-protocol, tftpd, tiff, webkitgtk
-
-	New packages: libmspack
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#12166: Compiling nodejs for SAMA5D3 always crash with illegal inst..
-	#12171: Python-opencv needs config.py and config-3.7.py to run..
-	#12211: host-nodejs 10.15.3 package fail to build
-	#12316: tzdata fails to install with empty "default local time"
-
 2019.02.7, Released November 10th, 2019

 	Important / security related fixes.
--- a/Config.in
+++ b/Config.in
@@ -50,11 +50,6 @@ config BR2_HOST_GCC_AT_LEAST_8
 	default y if BR2_HOST_GCC_VERSION = "8"
 	select BR2_HOST_GCC_AT_LEAST_7

-config BR2_HOST_GCC_AT_LEAST_9
-	bool
-	default y if BR2_HOST_GCC_VERSION = "9"
-	select BR2_HOST_GCC_AT_LEAST_8
-
 # When adding new entries above, be sure to update
 # the HOSTCC_MAX_VERSION variable in the Makefile.

@@ -63,6 +58,16 @@ config BR2_HOST_GCC_AT_LEAST_9
 config BR2_NEEDS_HOST_JAVA
 	bool

+# Hidden boolean selected by packages in need of javac in order to build
+# (example: classpath)
+config BR2_NEEDS_HOST_JAVAC
+	bool
+
+# Hidden boolean selected by packages in need of jar in order to build
+# (example: classpath)
+config BR2_NEEDS_HOST_JAR
+	bool
+
 # Hidden boolean selected by pre-built packages for x86, when they
 # need to run on x86-64 machines (example: pre-built external
 # toolchains, binary tools like SAM-BA, etc.).
@@ -685,24 +690,6 @@ config BR2_REPRODUCIBLE
 	  This is labeled as an experimental feature, as not all
 	  packages behave properly to ensure reproducibility.

-config BR2_PER_PACKAGE_DIRECTORIES
-	bool "Use per-package directories (experimental)"
-	help
-	  This option will change the build process of Buildroot
-	  package to use per-package target and host directories.
-
-	  This is useful for two related purposes:
-
-	    - Cleanly isolate the build of each package, so that a
-	      given package only "sees" the dependencies it has
-	      explicitly expressed, and not other packages that may
-	      have by chance been built before.
-
-	    - Enable top-level parallel build.
-
-	  This is labeled as an experimental feature, as not all
-	  packages behave properly with per-package directories.
-
 endmenu

 comment "Security Hardening Options"
@@ -753,7 +740,6 @@ config BR2_SSP_REGULAR

 config BR2_SSP_STRONG
 	bool "-fstack-protector-strong"
-	depends on BR2_TOOLCHAIN_HAS_SSP_STRONG
 	help
 	  Like -fstack-protector but includes additional functions to be
 	  protected - those that have local array definitions, or have
--- a/Config.in.legacy
+++ b/Config.in.legacy
@@ -144,266 +144,6 @@ endif

 ###############################################################################

-comment "Legacy options removed in 2020.05"
-
-config BR2_PACKAGE_COLLECTD_LVM
-	bool "lvm support in collectd was removed"
-	select BR2_LEGACY
-	help
-	  collectd removed LVM plugin, liblvm2app has been deprecated
-
-config BR2_PACKAGE_PYTHON_PYASN
-	bool "duplicate python-pyasn1 package removed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_PYTHON_PYASN1
-	help
-	  This package was a duplicate of python-pyasn1.
-
-config BR2_PACKAGE_PYTHON_PYASN_MODULES
-	bool "duplicate python-pyasn1-modules package removed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_PYTHON_PYASN1_MODULES
-	help
-	  This package was a duplicate of python-pyasn1-modules.
-
-config BR2_PACKAGE_LINUX_FIRMWARE_ATHEROS_10K_QCA6174
-	bool "duplicate QCA6174 firmware symbol removed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_LINUX_FIRMWARE_QUALCOMM_6174
-	help
-	  This config symbol duplicates existing symbol for QCA6174
-	  firmware.
-
-config BR2_PACKAGE_QT5CANVAS3D
-	bool "qt5canvas3d was removed"
-	select BR2_LEGACY
-	help
-	  This Qt5 module was removed by the upstream Qt project since
-	  Qt 5.13, so the corresponding Buildroot package was removed
-	  as well.
-
-config BR2_PACKAGE_KODI_LIBTHEORA
-	bool "libtheora support in Kodi was removed"
-	select BR2_LEGACY
-	help
-	  Kodi does not need libtheora
-
-config BR2_PACKAGE_CEGUI06
-	bool "BR2_PACKAGE_CEGUI06 was renamed"
-	select BR2_PACKAGE_CEGUI
-	select BR2_LEGACY
-	help
-	  The BR2_PACKAGE_CEGUI06 config symbol was renamed to
-	  BR2_PACKAGE_CEGUI.
-
-config BR2_GCC_VERSION_5_X
-	bool "gcc 5.x support removed"
-	select BR2_LEGACY
-	help
-	  Support for gcc version 5.x has been removed. The current
-	  default version (8.x or later) has been selected instead.
-
-comment "Legacy options removed in 2020.02"
-
-config BR2_PACKAGE_JAMVM
-	bool "jamvm removed"
-	select BR2_LEGACY
-	help
-	  JamVM has not had a release since 2014 and is unmaintained.
-
-config BR2_PACKAGE_CLASSPATH
-	bool "classpath removed"
-	select BR2_LEGACY
-	help
-	  GNU Classpath package was removed. The last upstream
-	  release was in 2012 and there hasn't been a commit
-	  since 2016.
-
-config BR2_PACKAGE_QT5_VERSION_5_6
-	bool "qt 5.6 support removed"
-	select BR2_LEGACY
-	help
-	  Support for Qt 5.6 is EOL and has been removed. The current
-	  version (5.12 or later) has been selected instead.
-
-config BR2_PACKAGE_CURL
-	bool "BR2_PACKAGE_CURL was renamed"
-	select BR2_PACKAGE_LIBCURL_CURL
-	select BR2_LEGACY
-	help
-	  The BR2_PACKAGE_CURL config symbol was renamed to
-	  BR2_PACKAGE_LIBCURL_CURL.
-
-config BR2_PACKAGE_GSTREAMER
-	bool "gstreamer-0.10 removed"
-	select BR2_LEGACY
-	help
-	  Gstreamer-0.10 package was removed. It has been deprecated
-	  upstream since 2012, and is missing a lot of features and
-	  fixes compared to gstreamer-1.x.
-
-config BR2_PACKAGE_NVIDIA_TEGRA23_BINARIES_GSTREAMER_PLUGINS
-	bool "nvidia-tegra23 binaries gstreamer 0.10.x support removed"
-	select BR2_LEGACY
-	help
-	  Gstreamer 0.10.x is no longer available in Buildroot, so
-	  neither is the support in nvidia-tegra23 binaries.
-
-config BR2_PACKAGE_NVIDIA_TEGRA23_BINARIES_NV_SAMPLE_APPS
-	bool "nvidia-tegra23 binaries sample apps removed"
-	select BR2_LEGACY
-	help
-	  Gstreamer 0.10.x is no longer available in Buildroot, so
-	  neither is the support in nvidia-tegra23 binaries.
-
-config BR2_PACKAGE_FREERDP_GSTREAMER
-	bool "freerdp gstreamer 0.10.x support removed"
-	select BR2_LEGACY
-	help
-	  Gstreamer 0.10.x is no longer available in Buildroot, so
-	  neither is the support in freerdp.
-
-config BR2_PACKAGE_OPENCV3_WITH_GSTREAMER
-	bool "opencv3 gstreamer 0.10.x support removed"
-	select BR2_LEGACY
-	help
-	  Gstreamer 0.10.x is no longer available in Buildroot, so
-	  neither is the support in opencv3.
-
-config BR2_PACKAGE_OPENCV_WITH_GSTREAMER
-	bool "opencv gstreamer 0.10.x support removed"
-	select BR2_LEGACY
-	help
-	  Gstreamer 0.10.x is no longer available in Buildroot, so
-	  neither is the support in opencv.
-
-config BR2_PACKAGE_LIBPLAYER
-	bool "libplayer package was removed"
-	select BR2_LEGACY
-	help
-	  The libplayer package was removed. The latest release is
-	  from 2010 and none of the backends are available in
-	  Buildroot any more.
-
-config BR2_GCC_VERSION_OR1K
-	bool "gcc 5.x fork for or1k has been removed"
-	select BR2_LEGACY
-	help
-	  Support for gcc 5.x for or1k has been removed. The current
-	  default version (9.x or later) has been selected instead.
-
-config BR2_PACKAGE_BLUEZ_UTILS
-	bool "bluez-utils was removed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_BLUEZ5_UTILS if BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_4 \
-		&& BR2_TOOLCHAIN_HAS_SYNC_4
-	help
-	  The bluez-utils (BlueZ 4.x) package was removed as it is
-	  deprecated since a long time. As an alternative, the
-	  bluez5-utils (BlueZ 5.x) has been automatically selected in
-	  your configuration.
-
-config BR2_PACKAGE_GADGETFS_TEST
-	bool "gadgetfs-test was removed"
-	select BR2_LEGACY
-	help
-	  The gadgetfs-test package was removed. Gadgetfs has been
-	  deprecated in favour of functionfs. Consider using
-	  gadget-tool (gt) instead.
-
-config BR2_PACKAGE_FIS
-	bool "fis was removed"
-	select BR2_LEGACY
-	help
-	  The fis package was removed.
-
-config BR2_PACKAGE_REFPOLICY_POLICY_VERSION
-	string "refpolicy policy version"
-	help
-	  The refpolicy policy version option has been moved to the
-	  libsepol package.
-
-config BR2_PACKAGE_REFPOLICY_POLICY_VERSION_WRAP
-	bool
-	default y if BR2_PACKAGE_REFPOLICY_POLICY_VERSION != ""
-	select BR2_LEGACY
-
-config BR2_PACKAGE_CELT051
-	bool "celt051 package was removed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_OPUS
-	help
-	  The celt051 package was removed as it is now obsolete since
-	  the CELT codec has been merged into the IETF Opus codec. As
-	  a result, the opus package has been automatically selected
-	  in your configuration.
-
-config BR2_PACKAGE_WIREGUARD
-	bool "wireguard package renamed"
-	depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_10
-	select BR2_LEGACY
-	select BR2_PACKAGE_WIREGUARD_LINUX_COMPAT if BR2_LINUX_KERNEL
-	select BR2_PACKAGE_WIREGUARD_TOOLS
-	help
-	  The wireguard package has been renamed to wireguard-tools
-	  for the userspace tooling and wireguard-linux-compat for the
-	  kernel side for legacy (<5.6) kernels to match upstream.
-
-config BR2_PACKAGE_PERL_NET_PING
-	bool "perl-net-ping was removed"
-	select BR2_LEGACY
-	help
-	  Net::Ping is a Perl core module (ie. bundled with perl).
-
-config BR2_PACKAGE_PERL_MIME_BASE64
-	bool "perl-mime-base64 was removed"
-	select BR2_LEGACY
-	help
-	  MIME::Base64 is a Perl core module (ie. bundled with perl).
-
-config BR2_PACKAGE_PERL_DIGEST_MD5
-	bool "perl-digest-md5 was removed"
-	select BR2_LEGACY
-	help
-	  Digest::MD5 is a Perl core module (ie. bundled with perl).
-
-config BR2_PACKAGE_ERLANG_P1_ICONV
-	bool "erlang-p1-iconv has been removed"
-	select BR2_LEGACY
-	help
-	  The erlang-p1-iconv package was no longer used by ejabberd,
-	  and was no longer maintained upstream, so it was removed.
-
-config BR2_KERNEL_HEADERS_5_3
-	bool "kernel headers version 5.3.x are no longer supported"
-	select BR2_LEGACY
-	help
-	  Version 5.3.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed.
-
-config BR2_PACKAGE_PYTHON_SCAPY3K
-	bool "python-scapy3k is replaced by python-scapy"
-	select BR2_LEGACY
-	select BR2_PACKAGE_PYTHON_SCAPY
-	help
-	  python-scapy3k has been deprecated, since python-scapy has
-	  gained Python 3 support. Use BR2_PACKAGE_PYTHON_SCAPY
-	  instead.
-
-config BR2_BINUTILS_VERSION_2_30_X
-	bool "binutils version 2.30 support removed"
-	select BR2_LEGACY
-	help
-	  Support for binutils version 2.30 has been removed. The
-	  current default version (2.31 or later) has been selected
-	  instead.
-
-config BR2_PACKAGE_RPI_USERLAND_START_VCFILED
-	bool "rpi-userland start vcfiled was removed"
-	select BR2_LEGACY
-	help
-	  The vcfiled support was removed upstream.
-
 comment "Legacy options removed in 2019.11"

 config BR2_PACKAGE_OPENVMTOOLS_PROCPS
--- a/286
+++ b/286
@@ -31,14 +31,12 @@ F:	package/audit/
 F:	package/busybox/
 F:	package/checkpolicy/
 F:	package/cppdb/
-F:	package/gobject-introspection/
 F:	package/gstreamer1/gstreamer1/
 F:	package/gstreamer1/gstreamer1-mm/
 F:	package/gstreamer1/gst1-plugins-bad/
 F:	package/gstreamer1/gst1-plugins-base/
 F:	package/gstreamer1/gst1-plugins-good/
 F:	package/gstreamer1/gst1-plugins-ugly/
-F:	package/gstreamer1/gst1-python/
 F:	package/gstreamer1/gst1-vaapi/
 F:	package/imx-usb-loader/
 F:	package/janus-gateway/
@@ -48,17 +46,13 @@ F:	package/libressl/
 F:	package/libselinux/
 F:	package/libsemanage/
 F:	package/libsepol/
-F:	package/libtextstyle/
 F:	package/libwebsockets/
 F:	package/mender-grubenv/
 F:	package/nginx-naxsi/
 F:	package/openjdk/
 F:	package/openjdk-bin/
 F:	package/php/
-F:	package/pkcs11-helper/
 F:	package/policycoreutils/
-F:	package/prelink-cross/
-F:	package/polkit/
 F:	package/python3/
 F:	package/python-aioredis/
 F:	package/python-asgiref/
@@ -67,15 +61,9 @@ F:	package/python-channels-redis/
 F:	package/python-daphne/
 F:	package/python-django-enumfields/
 F:	package/python-flask-sqlalchemy/
-F:	package/python-gitdb2/
-F:	package/python-gobject/
-F:	package/python-lockfile/
 F:	package/python-mutagen/
-F:	package/python-nested-dict/
-F:	package/python-pbr/
 F:	package/python-pip/
 F:	package/python-psycopg2/
-F:	package/python-smmap2/
 F:	package/python-sqlalchemy/
 F:	package/python-sqlparse/
 F:	package/python-visitor/
@@ -85,27 +73,20 @@ F:	package/selinux-python/
 F:	package/semodule-utils/
 F:	package/setools/
 F:	package/sngrep/
-F:	package/spidermonkey/
 F:	package/systemd/
-F:	support/testing/tests/package/test_gst1_python.py
-F:	support/testing/tests/package/test_python_gobject.py

 N:	Adam Heinrich <adam@adamh.cz>
 F:	package/jack1/

 N:	Adrian Perez de Castro <aperez@igalia.com>
 F:	package/brotli/
-F:	package/bubblewrap/
-F:	package/cage/
 F:	package/cog/
 F:	package/libepoxy/
 F:	package/libwpe/
 F:	package/webkitgtk/
-F:	package/wlroots/
 F:	package/woff2/
 F:	package/wpebackend-fdo/
 F:	package/wpewebkit/
-F:	package/xdg-dbus-proxy/

 N:	Adrien Gallouët <adrien@gallouet.fr>
 F:	package/bird/
@@ -116,9 +97,6 @@ F:	package/libmbim/
 F:	package/libqmi/
 F:	package/modem-manager/

-N:	Alex Michel <alex.michel@wiedemann-group.com>
-F:	package/network-manager-openvpn/
-
 N:	Alex Suykov <alex.suykov@gmail.com>
 F:	board/chromebook/snow/
 F:	configs/chromebook_snow_defconfig
@@ -135,12 +113,9 @@ F:	package/putty/
 N:	Alexander Kurz <akurz@blala.de>
 F:	package/minimodem/

-N:	Alexander Lukichev <alexander.lukichev@gmail.com>
+N:	Alexander Lukichev <alexander.lukichev@espotel.com>
 F:	package/openpgm/

-N:	Alexander Mukhin <alexander.i.mukhin@gmail.com>
-F:	package/tinyproxy/
-
 N:	Alexander Sverdlin <alexander.sverdlin@gmail.com>
 F:	package/mini-snmpd/

@@ -197,11 +172,9 @@ N:	Andrey Yurovsky <yurovsky@gmail.com>
 F:	package/rauc/

 N:	Angelo Compagnucci <angelo.compagnucci@gmail.com>
-F:	package/apparmor/
 F:	package/corkscrew/
 F:	package/fail2ban/
 F:	package/i2c-tools/
-F:	package/libapparmor/
 F:	package/mender/
 F:	package/mender-artifact/
 F:	package/mono/
@@ -251,6 +224,7 @@ F:	package/arp-scan/
 F:	package/dehydrated/
 F:	package/freescale-imx/firmware-imx/
 F:	package/freescale-imx/imx-lib/
+F:	package/gstreamer/gst-fsl-plugins/
 F:	package/libpagekite/
 F:	package/lua-bit32/
 F:	package/owfs/
@@ -258,13 +232,8 @@ F:	package/python-bottle/
 F:	package/sqlcipher/
 F:	package/stress/

-N:	Arthur Courtel <arthur.courtel@smile.fr>
-F:	board/raspberrypi/genimage-raspberrypi4-64.cfg
-F:	configs/raspberrypi4_64_defconfig
-
 N:	Asaf Kahlon <asafka7@gmail.com>
 F:	package/collectd/
-F:	package/libfuse3/
 F:	package/libuv/
 F:	package/python*
 F:	package/snmpclitools/
@@ -286,14 +255,7 @@ F:	package/luasec/
 F:	package/lua-ev/
 F:	package/orbit/

-N:	Attila Wagner <attila.wagner@onyxinsight.com>
-F:	package/python-canopen/
-
 N:	Bartosz Bilas <b.bilas@grinn-global.com>
-F:	board/stmicroelectronics/stm32mp157a-dk1/
-F:	configs/stm32mp157a_dk1_defconfig
-F:	package/python-esptool/
-F:	package/python-pyaes/
 F:	package/qt5/qt5scxml/
 F:	package/qt5/qt5webview/

@@ -312,7 +274,6 @@ N:	Baruch Siach <baruch@tkos.co.il>
 F:	board/solidrun/clearfog_gt_8k/
 F:	configs/solidrun_clearfog_gt_8k_defconfig
 F:	package/18xx-ti-utils/
-F:	package/cpuburn-arm/
 F:	package/daemon/
 F:	package/dropbear/
 F:	package/ebtables/
@@ -406,7 +367,6 @@ F:	package/libsndfile/
 F:	package/libsoil/
 F:	package/libsoundtouch/
 F:	package/libsquish/
-F:	package/libudfread/
 F:	package/liburiparser/
 F:	package/libva/
 F:	package/libva-intel-driver/
@@ -435,6 +395,7 @@ F:	package/perl-io-html/
 F:	package/perl-lwp-mediatypes/
 F:	package/perl-mail-dkim/
 F:	package/perl-mailtools/
+F:	package/perl-mime-base64/
 F:	package/perl-net-dns/
 F:	package/perl-net-http/
 F:	package/perl-netaddr-ip/
@@ -481,7 +442,6 @@ F:	package/x264/
 F:	package/x265/
 F:	package/ytree/
 F:	package/znc/
-F:	support/testing/tests/package/test_perl_html_parser.py

 N:	Biagio Montaruli <biagio.hkr@gmail.com>
 F:	board/acmesystems/
@@ -506,12 +466,18 @@ F:	package/sunxi-boards/

 N:	Carlos Santos <unixmania@gmail.com>
 F:	package/busybox/
+F:	package/cups/
+F:	package/cups-filters/
+F:	package/gtest/
 F:	package/initscripts/
 F:	package/intel-microcode/
+F:	package/libpam-radius-auth/
+F:	package/libpam-tacplus/
 F:	package/liburiparser/
 F:	package/modem-manager/
 F:	package/pamtester/
 F:	package/pcm-tools/
+F:	package/perl-file-util/
 F:	package/skeleton-custom/
 F:	package/skeleton-init-common/
 F:	package/skeleton-init-none/
@@ -519,7 +485,6 @@ F:	package/skeleton-init-systemd/
 F:	package/skeleton-init-sysv/
 F:	package/skeleton/
 F:	package/sysvinit/
-F:	package/udev-gentoo-scripts/
 F:	package/util-linux/
 F:	package/tpm2-abrmd/
 F:	package/tpm2-tools/
@@ -628,10 +593,6 @@ F:	package/libsemanage/
 F:	package/libsepol/
 F:	package/policycoreutils/

-N:	Clément Péron <peron.clem@gmail.com>
-F:	board/beelink/gs1/
-F:	configs/beelink_gs1_defconfig
-
 N:	Corentin Guillevic <corentin.guillevic@smile.fr>
 F:	package/libloki/

@@ -693,9 +654,7 @@ F:	linux/linux-ext-ev3dev-linux-drivers.mk
 F:	package/brickd/
 F:	package/ev3dev-linux-drivers/

-N:	Davide Viti <zinosat@gmail.com>
-F:	board/friendlyarm/nanopi-r1/
-F:	configs/nanopi_r1_defconfig
+N:	Davide Viti <zinosat@tiscali.it>
 F:	package/flann/
 F:	package/python-paho-mqtt/
 F:	package/qhull/
@@ -842,9 +801,6 @@ F:	package/libmaxminddb/
 F:	package/openzwave/

 N:	Fabrice Fontaine <fontaine.fabrice@gmail.com>
-F:	package/bearssl/
-F:	package/belle-sip/
-F:	package/belr/
 F:	package/boinc/
 F:	package/cairo/
 F:	package/duktape/
@@ -908,7 +864,6 @@ F:	package/pcmanfm/
 F:	package/python-backcall/
 F:	package/python-jedi/
 F:	package/python-parso/
-F:	package/rocksdb/
 F:	package/rygel/
 F:	package/safeclib/
 F:	package/suricata/
@@ -917,10 +872,6 @@ F:	package/tinydtls/
 F:	package/tinymembench/
 F:	package/whois/

-N:	Fabrice Goucem <fabrice.goucem@oss.nxp.com>
-F:	board/freescale/imx6ullevk/
-F:	configs/freescale_imx6ullevk_defconfig
-
 N:	Falco Hyfing <hyfinglists@gmail.com>
 F:	package/python-pymodbus/

@@ -984,20 +935,12 @@ F:	package/ucl/
 F:	package/upx/
 F:	package/zxing-cpp/

-N:	Frank Vanbever <frank.vanbever@essensium.com>
-F: 	package/elixir/
-F:	package/libmodsecurity/
-F:	package/nginx-modsecurity/
-
 N:	Gaël Portay <gael.portay@collabora.com>
 F:	package/qt5/qt5virtualkeyboard/
 F:	package/qt5/qt5webengine/
 F:	package/qt5/qt5webkit/
 F:	package/qt5/qt5webkit-examples/

-N:	Gao Xiang <hsiangkao@aol.com>
-F:	package/erofs-utils/
-
 N:	Gary Bisson <bisson.gary@gmail.com>
 F:	board/boundarydevices/
 F:	configs/nitrogen*
@@ -1022,14 +965,11 @@ F:	configs/qemu_*
 N:	Gilles Talis <gilles.talis@gmail.com>
 F:	board/freescale/imx8mmevk/
 F:	configs/freescale_imx8mmevk_defconfig
-F:	package/cctz/
 F:	package/fdk-aac/
 F:	package/httping/
 F:	package/iozone/
 F:	package/leptonica/
-F:	package/libeXosip2/
 F:	package/libolm/
-F:	package/libosip2/
 F:	package/ocrad/
 F:	package/restclient-cpp/
 F:	package/tesseract-ocr/
@@ -1041,7 +981,6 @@ F:	package/at/
 F:	package/libnspr/
 F:	package/libnss/
 F:	package/minicom/
-F:	package/nfs-utils/
 F:	package/sunxi-mali-mainline/
 F:	package/sunxi-mali-mainline-driver/

@@ -1061,7 +1000,6 @@ F:	package/f2fs-tools/
 F:	package/pigpio/
 F:	package/python-aioblescan/
 F:	package/python-bluezero/
-F:	package/python-crontab/
 F:	package/python-falcon/
 F:	package/python-ifaddr/
 F:	package/python-hiredis/
@@ -1098,7 +1036,6 @@ F:	package/gnuradio/
 F:	package/gqrx/
 F:	package/gr-osmosdr/
 F:	package/libusbgx/
-F:	package/matio/
 F:	package/python-cheetah/
 F:	package/python-markdown/
 F:	package/python-remi/
@@ -1172,44 +1109,25 @@ F:	configs/pine64_defconfig
 F:	configs/pine64_sopine_defconfig

 N:	James Hilliard <james.hilliard1@gmail.com>
-F:	package/apcupsd/
-F:	package/exfatprogs/
-F:	package/gensio/
 F:	package/lua-std-debug/
 F:	package/lua-std-normalize/
-F:	package/pipewire/
 F:	package/python-aioconsole/
 F:	package/python-aiodns/
 F:	package/python-aiohttp/
 F:	package/python-aiohttp-cors/
-F:	package/python-aiohttp-debugtoolbar/
 F:	package/python-aiohttp-jinja2/
-F:	package/python-aiohttp-mako/
 F:	package/python-aiohttp-remotes/
 F:	package/python-aiohttp-security/
 F:	package/python-aiohttp-session/
 F:	package/python-aiohttp-sse/
-F:	package/python-aiologstash/
 F:	package/python-aiomonitor/
 F:	package/python-aiojobs/
 F:	package/python-aiorwlock/
-F:	package/python-aiosignal/
-F:	package/python-aiozipkin/
-F:	package/python-argon2-cffi/
-F:	package/python-async-lru/
 F:	package/python-async-timeout/
 F:	package/python-brotli/
-F:	package/python-cbor2/
 F:	package/python-cchardet/
-F:	package/python-flatbuffers/
-F:	package/python-frozenlist/
-F:	package/python-greenlet/
-F:	package/python-janus/
-F:	package/python-logstash/
 F:	package/python-multidict/
 F:	package/python-pycares/
-F:	package/python-snappy/
-F:	package/python-sockjs/
 F:	package/python-terminaltables/
 F:	package/python-yarl/

@@ -1248,8 +1166,6 @@ F:	package/zynq-boot-bin/

 N:	Jared Bents <jared.bents@rockwellcollins.com>
 F:	package/davici/
-F:	package/python-filelock/
-F:	package/python-pysftp/

 N:	Jarkko Sakkinen <jarkko.sakkinen@intel.com>
 F:	package/quota/
@@ -1257,12 +1173,6 @@ F:	package/quota/
 N:	Jason Pruitt <jrspruitt@gmail.com>
 F:	package/librtlsdr/

-N:	Jean Burgat <jeanburgat33@gmail.com>
-F:	package/openfpgaloader/
-
-N:	Jens Kleintje <scooby22@web.de>
-F:	package/gcnano-binaries/
-
 N:	Jens Rosenboom <j.rosenboom@x-ion.de>
 F:	package/sl/

@@ -1286,15 +1196,6 @@ F:	package/wmctrl/
 F:	package/x11r7/xdriver_xf86-video-imx/
 F:	package/x11r7/xdriver_xf86-video-imx-viv/

-N:	Jianhui Zhao <zhaojh329@gmail.com>
-F:	package/libuhttpd/
-F:	package/libuwsc/
-F:	package/rtty/
-
-N:	Joao Pinto <jpinto@synopsys.com>
-F:	board/synopsys/vdk/
-F:	configs/snps_aarch64_vdk_defconfig
-
 N:	Joel Carlson <JoelsonCarl@gmail.com>
 F:	package/c-capnproto/
 F:	package/capnproto/
@@ -1314,18 +1215,13 @@ F:	package/python-libconfig/

 N:	Johan Oudinet <johan.oudinet@gmail.com>
 F:	package/ejabberd/
-F:	package/erlang-base64url/
 F:	package/erlang-eimp/
 F:	package/erlang-goldrush/
-F:	package/erlang-idna/
 F:	package/erlang-jiffy/
-F:	package/erlang-jose/
 F:	package/erlang-lager/
-F:	package/erlang-p1-acme/
 F:	package/erlang-p1-cache-tab/
-F:	package/erlang-p1-mqtree/
+F:	package/erlang-p1-iconv/
 F:	package/erlang-p1-oauth2/
-F:	package/erlang-p1-pkix/
 F:	package/erlang-p1-sip/
 F:	package/erlang-p1-stringprep/
 F:	package/erlang-p1-stun/
@@ -1334,17 +1230,14 @@ F:	package/erlang-p1-utils/
 F:	package/erlang-p1-xml/
 F:	package/erlang-p1-xmpp/
 F:	package/erlang-p1-yaml/
-F:	package/erlang-p1-yconf/
 F:	package/erlang-p1-zlib/
 F:	package/nginx-dav-ext/
-F:	package/vuejs/

 N:	John Stile <johns@msli.com>
 F:	package/dhcpcd/

 N:	John Faith <jfaith@impinj.com>
 F:	package/python-inflection/
-F:	package/sdbusplus/

 N:	Jonathan Ben Avraham <yba@tkos.co.il>
 F:	arch/Config.in.xtensa
@@ -1432,22 +1325,13 @@ N:	Julien Corjon <corjon.j@ecagroup.com>
 F:	package/qt5/

 N:	Julien Grossholtz <julien.grossholtz@openest.io>
-F:	board/technologic/ts7680/
-F:	configs/ts7680_defconfig
 F:	package/paho-mqtt-c

 N:	Julien Olivain <juju@cotds.org>
-F:	board/qmtech/zynq/
 F:	board/technexion/imx8mmpico/
 F:	board/technexion/imx8mpico/
 F:	configs/imx8mmpico_defconfig
 F:	configs/imx8mpico_defconfig
-F:	configs/zynq_qmtech_defconfig
-F:	package/fluid-soundfont/
-F:	package/fluidsynth/
-F:	package/glslsandbox-player/
-F:	package/ptm2human/
-F:	package/python-pyalsa/

 N:	Julien Viard de Galbert <julien@vdg.name>
 F:	package/dieharder/
@@ -1502,23 +1386,14 @@ F:	package/mongrel2/

 N:	Lothar Felten <lothar.felten@gmail.com>
 F:	board/bananapi/bananapi-m2-ultra/
-F:	board/beaglebone/
 F:	configs/bananapi_m2_ultra_defconfig
-F:	configs/beaglebone_defconfig
-F:	configs/beaglebone_qt5_defconfig
 F:	package/ti-sgx-demos/
-F:	package/ti-sgx-libgbm/
 F:	package/ti-sgx-km/
 F:	package/ti-sgx-um/

 N:	Louis Aussedat <aussedat.louis@gmail.com>
 F:	board/friendlyarm/nanopi-neo-plus2/
 F:	configs/friendlyarm_nanopi_neo_plus2_defconfig
-F:	package/mfoc
-F:	package/libpam-nfc
-F:	package/python-dnspython/
-F:	package/python-future/
-F:	package/python-huepy/
 F:	package/python-tqdm/

 N:	Louis-Paul Cordier <lpdev@cordier.org>
@@ -1548,11 +1423,6 @@ F:	support/legal-info/
 N:	Lucas De Marchi <lucas.de.marchi@gmail.com>
 F:	package/fswebcam/

-N:	Lubomir Rintel <lkundrak@v3.sk>
-F:	board/olpc/
-F:	configs/olpc_xo1_defconfig
-F:	configs/olpc_xo175_defconfig
-
 N:	Ludovic Desroches <ludovic.desroches@microchip.com>
 F:	board/atmel/
 F:	configs/at91*
@@ -1564,11 +1434,6 @@ F:	package/python-simplejson/
 F:	package/python-versiontools/
 F:	package/wilc1000-firmware/

-N:	Maeva Manuel <maeva.manuel@oss.nxp.com>
-F:	board/freescale/imx8qmmek/
-F:	configs/freescale_imx8qmmek_defconfig
-F:	package/freescale-imx/imx-seco/
-
 N:	Mahyar Koshkouei <mahyar.koshkouei@gmail.com>
 F:	package/ffmpeg/
 F:	package/mpv/
@@ -1597,10 +1462,8 @@ F:	package/lua-flu/
 F:	package/lua-stdlib/
 F:	package/luaossl/
 F:	package/murata-cyw-fw/
-F:	package/netdata/
 F:	package/rs485conf/
 F:	package/turbolua/
-F:	support/testing/tests/package/test_netdata.py

 N:	Marcus Folkesson <marcus.folkesson@gmail.com>
 F:	package/libostree/
@@ -1612,8 +1475,6 @@ F:	utils/config
 F:	utils/diffconfig

 N:	Marek Belisko <marek.belisko@open-nandra.com>
-F:	board/friendlyarm/nanopi-neo4/
-F:	configs/nanopi_neo4_defconfig
 F:	package/libatasmart/
 F:	package/polkit/
 F:	package/sg3_utils/
@@ -1654,10 +1515,6 @@ F:	package/tslib/
 F:	package/x11r7/xdriver_xf86-input-tslib/
 F:	package/x11vnc/

-N:	Masahiro Yamada <yamada.masahiro@socionext.com>
-F:	board/arm/foundation-v8/
-F:	configs/arm_foundationv8_defconfig
-
 N:	Mathieu Audat <mathieuaudat@gmail.com>
 F:	board/technologic/ts4900/
 F:	configs/ts4900_defconfig
@@ -1728,7 +1585,6 @@ F:	package/policycoreutils/
 F:	package/proftpd/
 F:	package/protobuf-c/
 F:	package/protobuf/
-F:	package/python-bunch/
 F:	package/python-colorama/
 F:	package/python-flask-cors/
 F:	package/python-iptables/
@@ -1755,8 +1611,6 @@ F:	package/wireless_tools/
 F:	package/xen/
 F:	support/testing/tests/package/br2-external/openjdk/
 F:	support/testing/tests/package/test_openjdk.py
-F:	support/testing/tests/package/test_opkg/
-F:	support/testing/tests/package/test_opkg.py

 N:	Mauro Condarelli <mc5686@mclink.it>
 F:	package/mc/
@@ -1768,6 +1622,7 @@ F:	package/python-crossbar/
 F:	package/python-lmdb/
 F:	package/python-mistune/
 F:	package/python-netaddr/
+F:	package/python-pyasn-modules/
 F:	package/python-pygments/
 F:	package/python-pynacl/
 F:	package/python-pytrie/
@@ -1820,10 +1675,6 @@ F:	board/arcturus/
 F:	configs/arcturus_ucp1020_defconfig
 F:	configs/arcturus_ucls1012a_defconfig

-N:	Michael Fischer <mf@go-sys.de>
-F:	package/gnuplot/
-F:	package/sdl2/
-
 N:	Michael Rommel <rommel@layer-7.net>
 F:	package/knock/
 F:	package/python-crc16/
@@ -1834,7 +1685,6 @@ F:	package/python-spidev/

 N:	Michael Vetter <jubalh@iodoru.org>
 F:	package/jasper/
-F:	package/libstrophe/

 N:	Michael Walle <michael@walle.cc>
 F:	package/libavl/
@@ -1862,9 +1712,6 @@ F:	package/libfribidi/
 N:	Min Xu <xuminready@gmail.com>
 F:	package/shadowsocks-libev/

-N:	Mircea Gliga <gliga.mircea@gmail.com>
-F:	package/mbuffer/
-
 N:	Mirza Krak <mirza.krak@northern.tech>
 F:	package/mender/
 F:	package/mender-artifact/
@@ -1883,15 +1730,10 @@ F:	package/libgudev/
 N:	Naumann Andreas <ANaumann@ultratronik.de>
 F:	package/evemu/
 F:	package/libevdev/
-F:	package/pkg-qmake.mk

 N:	Nicola Di Lieto <nicola.dilieto@gmail.com>
 F:	package/uacme/

-N:	Nicholas Sielicki <sielicki@yandex.com>
-F:	board/intel/galileo/
-F:	configs/galileo_defconfig
-
 N:	Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
 F:	package/libgit2/

@@ -1953,26 +1795,15 @@ F:	package/checksec/
 N:	Parnell Springmeyer <parnell@digitalmentat.com>
 F:	package/scrypt/

-N:	Pascal de Bruijn <p.debruijn@unilogic.nl>
-F:	package/libargon2/
-F:	package/linux-tools/S10hyperv
-F:	package/linux-tools/hyperv*.service
-F:	package/linux-tools/linux-tool-hv.mk.in
-
 N:	Pascal Huerst <pascal.huerst@gmail.com>
 F:	package/google-breakpad/

 N:	Patrick Gerber <kpa_info@yahoo.fr>
 F:	package/yavta/

-N:	Patrick Havelange <patrick.havelange@essensium.com>
-F:	support/testing/tests/package/test_lxc.py
-F:	support/testing/tests/package/test_lxc/
-
 N:	Paul Cercueil <paul@crapouillou.net>
 F:	package/libiio/
 F:	package/lightning/
-F:	package/umtprd/

 N:	Pedro Aguilar <paguilar@paguilar.org>
 F:	package/libunistring/
@@ -2033,8 +1864,7 @@ F:	package/python-websocket-client/
 F:	package/sedutil/
 F:	package/tpm2-totp/
 F:	package/triggerhappy/
-F:	package/wireguard-linux-compat/
-F:	package/wireguard-tools/
+F:	package/wireguard/
 F:	support/testing/tests/package/test_docker_compose.py

 N:	Peter Seiderer <ps.report@gmx.net>
@@ -2072,10 +1902,8 @@ N:	Petr Vorel <petr.vorel@gmail.com>
 F:	package/ima-evm-utils/
 F:	package/iproute2/
 F:	package/iputils/
-F:	package/libtirpc/
 F:	package/linux-backports/
 F:	package/ltp-testsuite/
-F:	package/nfs-utils/
 F:	support/kconfig/

 N:	Phil Eichinger <phil.eichinger@gmail.com>
@@ -2095,9 +1923,6 @@ F:	package/lttng-tools/
 F:	package/python-ipython/
 F:	package/liburcu/

-N:	Philippe Reynes <philippe.reynes@softathome.com>
-F:	package/ibm-sw-tpm2/
-
 N:	Pierre Crokaert <pct@crookies.net>
 F:	board/hardkernel/odroidxu4/
 F:	configs/odroidxu4_defconfig
@@ -2112,17 +1937,13 @@ N:	Pierre-Jean Texier <pjtexier@koncepto.io>
 F:	package/fping/
 F:	package/genimage/
 F:	package/haveged/
-F:	package/ipset/
 F:	package/libarchive/
 F:	package/libevent/
 F:	package/libubootenv/
 F:	package/libxml2/
 F:	package/mongoose/
 F:	package/mxml/
-F:	package/numactl/
-F:	package/python-modbus-tk/
 F:	package/python-periphery/
-F:	package/raspi-gpio/
 F:	package/sbc/
 F:	package/stunnel/
 F:	package/tree/
@@ -2154,21 +1975,19 @@ F:	package/uhttpd/
 F:	package/ustream-ssl/

 N:	Refik Tuzakli <tuzakli.refik@gmail.com>
-F:	package/freescale-imx/
 F:	package/paho-mqtt-cpp/

-N:	Raphaël Mélotte <raphael.melotte@essensium.com>
-F:	package/jbig2dec/
-
 N:	Rémi Rérolle <remi.rerolle@gmail.com>
 F:	package/libfreeimage/

 N:	Renaud Aubin <root@renaud.io>
 F:	package/libhttpparser/

+N:	Rhys Williams <github@wilberforce.co.nz>
+F:	package/lirc-tools/
+
 N:	Ricardo Martincoski <ricardo.martincoski@datacom.com.br>
 F:	package/atop/
-F:	package/thermald/

 N:	Ricardo Martincoski <ricardo.martincoski@gmail.com>
 F:	support/testing/infra/
@@ -2187,6 +2006,10 @@ N:	Richard Braun <rbraun@sceen.net>
 F:	package/curlftpfs/
 F:	package/tzdata/

+N:	Rico Bachmann <bachmann@tofwerk.com>
+F:	package/apr-util/
+F:	package/subversion/
+
 N:	RJ Ascani <rj.ascani@gmail.com>
 F:	package/azmq/

@@ -2199,9 +2022,6 @@ F:	package/irssi/
 F:	package/vnstat/

 N:	Romain Naour <romain.naour@gmail.com>
-F:	board/qemu/
-F:	configs/qemu_*
-F:	package/alure/
 F:	package/aubio/
 F:	package/binutils/
 F:	package/bullet/
@@ -2241,8 +2061,9 @@ F:	package/upower/
 F:	package/waffle/
 F:	package/xenomai/
 F:	package/zziplib/
-F:	support/testing/tests/package/test_glxinfo.py
-F:	toolchain/
+F:	toolchain/toolchain-external/toolchain-external-arm-aarch64/
+F:	toolchain/toolchain-external/toolchain-external-arm-aarch64-be/
+F:	toolchain/toolchain-external/toolchain-external-arm-arm/

 N:	Roman Gorbenkov <roman.gorbenkov@ens2m.org>
 F:	package/davfs2/
@@ -2250,6 +2071,7 @@ F:	package/davfs2/
 N:	Ryan Barnett <ryan.barnett@rockwellcollins.com>
 F:	package/atftp/
 F:	package/miraclecast/
+F:	package/python-pyasn/
 F:	package/python-pycrypto/
 F:	package/python-pysnmp/
 F:	package/python-pysnmp-mibs/
@@ -2264,6 +2086,10 @@ F:	package/mariadb/
 N:	Ryan Wilkins <ryan@deadfrog.net>
 F:	package/biosdevname/

+N:	Sam Bobroff <sam.bobroff@au1.ibm.com>
+F:	arch/Config.in.powerpc
+F:	package/librtas/
+
 N:	Sam Lancia <sam@gpsm.co.uk>
 F:	package/lrzip/

@@ -2319,7 +2145,8 @@ F:	configs/linksprite_pcduino_defconfig
 F:	configs/orangepi_one_defconfig
 F:	configs/orangepi_pc_plus_defconfig
 F:	configs/orangepi_zero_defconfig
-F:	configs/solidrun_macchiatobin_defconfig
+F:	configs/solidrun_macchiatobin_mainline_defconfig
+F:	configs/solidrun_macchiatobin_marvell_defconfig
 F:	package/armbian-firmware/
 F:	package/hostapd/
 F:	package/rtl8189fs/
@@ -2336,7 +2163,6 @@ F:	package/libgdiplus/
 F:	package/pimd/
 F:	package/snort/
 F:	package/stella/
-F:	package/tio/
 F:	package/traceroute/
 F:	package/tunctl/
 F:	package/ubus/
@@ -2385,9 +2211,6 @@ F:	package/libvpx/
 F:	package/mesa3d-demos/
 F:	package/ti-gfx/

-N:	Stefan Ott <stefan@ott.net>
-F:	package/unbound/
-
 N:	Stefan Sørensen <stefan.sorensen@spectralink.com>
 F:	package/cracklib/
 F:	package/libpwquality/
@@ -2423,21 +2246,21 @@ N:	Steven Noonan <steven@uplinklabs.net>
 F:	package/hwloc/
 F:	package/powertop/

-N:	Suniel Mahesh <sunil@amarulasolutions.com>
-F:	board/firefly/
-F:	configs/roc_pc_rk3399_defconfig
-F:	package/arm-gnu-a-toolchain/
-
 N:	Sven Haardiek <sven.haardiek@iotec-gmbh.de>
 F:	package/lcdproc/
 F:	package/python-influxdb/

+N:	Sven Neumann <neumann@teufel.de>
+F:	package/glib-networking/
+F:	package/gstreamer1/gst1-libav/
+F:	package/libmms/
+F:	package/orc/
+F:	package/wampcc/
+
 N:	Sven Oliver Moll <svolli@svolli.de>
 F:	package/most/

 N:	Theo Debrouwere <t.debrouwere@televic.com>
-F:	board/beagleboardx15/
-F:	configs/beagleboardx15_defconfig
 F:	package/pugixml/

 N:	Thierry Bultel <tbultel@free.fr>
@@ -2456,33 +2279,20 @@ F:	package/civetweb/

 N:	Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
 F:	docs/manual/
-F:	package/cereal/
-F:	package/chartjs/
-F:	package/libtelnet/
 F:	package/opkg-utils/
 F:	package/perl-convert-asn1/
 F:	package/perl-crypt-blowfish/
 F:	package/perl-crypt-cbc/
-F:	package/perl-crypt-openssl-aes/
-F:	package/perl-i18n/
-F:	package/perl-locale-maketext-lexicon/
-F:	package/perl-lwp-protocol-https/
-F:	package/perl-math-prime-util/
+F:	package/perl-digest-md5/
 F:	package/perl-mime-base64-urlsafe/
 F:	package/perl-mojolicious-plugin-authentication/
-F:	package/perl-mojolicious-plugin-authorization/
-F:	package/perl-mojolicious-plugin-cspheader/
-F:	package/perl-mojolicious-plugin-i18n/
-F:	package/perl-mojolicious-plugin-securityheader/
-F:	package/perl-mozilla-ca/
+F:	package/perl-net-ping/
 F:	package/perl-net-snmp/
 F:	package/perl-net-ssh2/
 F:	package/perl-net-telnet/
-F:	package/perl-path-class/
 F:	package/pigz/
 F:	package/xenomai/
 F:	support/scripts/size-stats
-F:	support/testing/tests/package/test_perl_lwp_protocol_https.py
 F:	utils/size-stats-compare
 F:	toolchain/

@@ -2546,26 +2356,18 @@ F:	package/scons/
 F:	package/squashfs/
 F:	package/wayland/
 F:	package/weston/
-F:	support/testing/tests/boot/test_syslinux.py
 F:	toolchain/

 N:	Timo Ketola <timo.ketola@exertus.fi>
 F:	package/fbgrab/

 N:	Titouan Christophe <titouan.christophe@railnova.eu>
-F:	package/avro-c/
 F:	package/mosquitto/
-F:	package/python-avro/
 F:	package/redis/
-F:	package/waf/
-F:	support/testing/tests/package/test_crudini.py

 N:	Trent Piepho <tpiepho@impinj.com>
 F:	package/libp11/

-N:	Tudor Holton <buildroot@tudorholton.com>
-F:	package/openjdk/
-
 N:	Tzu-Jung Lee <roylee17@gmail.com>
 F:	package/dropwatch/
 F:	package/tstools/
@@ -2573,7 +2375,6 @@ F:	package/tstools/
 N:	Vadim Kochan <vadim4j@gmail.com>
 F:	package/brcm-patchram-plus/
 F:	package/gettext-tiny/
-F:	package/tinyssh/

 N:	Valentin Korenblit <valentinkorenblit@gmail.com>
 F:	package/clang/
@@ -2638,7 +2439,8 @@ F:	board/friendlyarm/nanopi-neo/
 F:	configs/nanopi_neo_defconfig
 F:	fs/squashfs/
 F:	package/asterisk/
-F:	package/cegui/
+F:	package/cegui06/
+F:	package/celt051/
 F:	package/dahdi-linux/
 F:	package/dahdi-tools/
 F:	package/dtc/
@@ -2649,7 +2451,6 @@ F:	package/keyutils/
 F:	package/libbsd/
 F:	package/libedit/
 F:	package/libgsm/
-F:	package/libiberty/
 F:	package/libinput/
 F:	package/libiscsi/
 F:	package/libpri/
@@ -2687,6 +2488,7 @@ F:	configs/beaglebone_defconfig
 F:	configs/beaglebone_qt5_defconfig
 F:	package/acl/
 F:	package/attr/
+F:	package/bluez_utils/
 F:	package/boost/
 F:	package/bootstrap/
 F:	package/cannelloni/
@@ -2699,7 +2501,6 @@ F:	package/imlib2/
 F:	package/jquery-datetimepicker/
 F:	package/jquery-sidebar/
 F:	package/kmod/
-F:	package/libftdi1/
 F:	package/libical/
 F:	package/libmbim/
 F:	package/libndp/
@@ -2719,15 +2520,12 @@ F:	package/poco/
 F:	package/python*
 F:	package/ser2net/
 F:	package/socketcand/
-F:	package/swig/
 F:	package/qt5/qt5serialbus/
 F:	package/sdparm/
 F:	package/ti-utils/
 F:	package/x11r7/xapp_xconsole/
 F:	package/x11r7/xapp_xinput-calibrator/
 F:	package/zlog/
-F:	support/testing/tests/package/test_libftdi1.py
-F:	support/testing/tests/package/test_python_can.py
 F:	utils/scanpypi

 N:	Zoltan Gyarmati <zgyarmati@zgyarmati.de>
--- a/87
+++ b/87
@@ -2,7 +2,7 @@
 #
 # Copyright (C) 1999-2005 by Erik Andersen <andersen@codepoet.org>
 # Copyright (C) 2006-2014 by the Buildroot developers <buildroot@uclibc.org>
-# Copyright (C) 2014-2020 by the Buildroot developers <buildroot@buildroot.org>
+# Copyright (C) 2014-2019 by the Buildroot developers <buildroot@buildroot.org>
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -92,9 +92,9 @@ all:
 .PHONY: all

 # Set and export the version string
-export BR2_VERSION := 2020.05-rc1
+export BR2_VERSION := 2019.11.1
 # Actual time the release is cut (for reproducible builds)
-BR2_VERSION_EPOCH = 1588882900
+BR2_VERSION_EPOCH = 1578831000

 # Save running make version since it's clobbered by the make package
 RUNNING_MAKE_VERSION := $(MAKE_VERSION)
@@ -188,9 +188,6 @@ ifneq ($(BR2_EXTERNAL_ERROR),)
 $(error $(BR2_EXTERNAL_ERROR))
 endif

-# Workaround bug in make-4.3: https://savannah.gnu.org/bugs/?57676
-$(BASE_DIR)/.br2-external.mk:;
-
 # To make sure that the environment variable overrides the .config option,
 # set this before including .config.
 ifneq ($(BR2_DL_DIR),)
@@ -207,7 +204,6 @@ BR_GRAPH_OUT := $(or $(BR2_GRAPH_OUT),pdf)
 BUILD_DIR := $(BASE_DIR)/build
 BINARIES_DIR := $(BASE_DIR)/images
 BASE_TARGET_DIR := $(BASE_DIR)/target
-PER_PACKAGE_DIR := $(BASE_DIR)/per-package
 # initial definition so that 'make clean' works for most users, even without
 # .config. HOST_DIR will be overwritten later when .config is included.
 HOST_DIR := $(BASE_DIR)/host
@@ -230,12 +226,21 @@ ifeq ($(filter $(noconfig_targets),$(MAKECMDGOALS)),)
 -include $(BR2_CONFIG)
 endif

-ifeq ($(BR2_PER_PACKAGE_DIRECTORIES),)
-# Disable top-level parallel build if per-package directories is not
-# used. Indeed, per-package directories is necessary to guarantee
-# determinism and reproducibility with top-level parallel build.
+# Parallel execution of this Makefile is disabled because it changes
+# the packages building order, that can be a problem for two reasons:
+# - If a package has an unspecified optional dependency and that
+#   dependency is present when the package is built, it is used,
+#   otherwise it isn't (but compilation happily proceeds) so the end
+#   result will differ if the order is swapped due to parallel
+#   building.
+# - Also changing the building order can be a problem if two packages
+#   manipulate the same file in the target directory.
+#
+# Taking into account the above considerations, if you still want to execute
+# this top-level Makefile in parallel comment the ".NOTPARALLEL" line and
+# use the -j<jobs> option when building, e.g:
+#      make -j$((`getconf _NPROCESSORS_ONLN`+1))
 .NOTPARALLEL:
-endif

 # timezone and locale may affect build output
 ifeq ($(BR2_REPRODUCIBLE),y)
@@ -343,7 +348,7 @@ export HOSTARCH := $(shell LC_ALL=C $(HOSTCC_NOCCACHE) -v 2>&1 | \

 # When adding a new host gcc version in Config.in,
 # update the HOSTCC_MAX_VERSION variable:
-HOSTCC_MAX_VERSION := 9
+HOSTCC_MAX_VERSION := 8

 HOSTCC_VERSION := $(shell V=$$($(HOSTCC_NOCCACHE) --version | \
 	sed -n -r 's/^.* ([0-9]*)\.([0-9]*)\.([0-9]*)[ ]*.*/\1 \2/p'); \
@@ -447,24 +452,19 @@ XZCAT := $(call qstrip,$(BR2_XZCAT))
 LZCAT := $(call qstrip,$(BR2_LZCAT))
 TAR_OPTIONS = $(call qstrip,$(BR2_TAR_OPTIONS)) -xf

-ifeq ($(BR2_PER_PACKAGE_DIRECTORIES),y)
-HOST_DIR = $(if $(PKG),$(PER_PACKAGE_DIR)/$($(PKG)_NAME)/host,$(call qstrip,$(BR2_HOST_DIR)))
-TARGET_DIR = $(if $(ROOTFS),$(ROOTFS_$(ROOTFS)_TARGET_DIR),$(if $(PKG),$(PER_PACKAGE_DIR)/$($(PKG)_NAME)/target,$(BASE_TARGET_DIR)))
-else
+# packages compiled for the host go here
 HOST_DIR := $(call qstrip,$(BR2_HOST_DIR))
+
+# The target directory is common to all packages,
+# but there is one that is specific to each filesystem.
 TARGET_DIR = $(if $(ROOTFS),$(ROOTFS_$(ROOTFS)_TARGET_DIR),$(BASE_TARGET_DIR))
-endif

 ifneq ($(HOST_DIR),$(BASE_DIR)/host)
 HOST_DIR_SYMLINK = $(BASE_DIR)/host
 $(HOST_DIR_SYMLINK): $(BASE_DIR)
-	ln -snf $(HOST_DIR) $(HOST_DIR_SYMLINK)
+	ln -snf $(HOST_DIR) $(BASE_DIR)/host
 endif

-STAGING_DIR_SYMLINK = $(BASE_DIR)/staging
-$(STAGING_DIR_SYMLINK): $(BASE_DIR)
-	ln -snf $(STAGING_DIR) $(STAGING_DIR_SYMLINK)
-
 # Quotes are needed for spaces and all in the original PATH content.
 BR_PATH = "$(HOST_DIR)/bin:$(HOST_DIR)/sbin:$(PATH)"

@@ -593,8 +593,8 @@ world: target-post-image
 .PHONY: prepare-sdk
 prepare-sdk: world
 	@$(call MESSAGE,"Rendering the SDK relocatable")
-	PER_PACKAGE_DIR=$(PER_PACKAGE_DIR) $(TOPDIR)/support/scripts/fix-rpath host
-	PER_PACKAGE_DIR=$(PER_PACKAGE_DIR) $(TOPDIR)/support/scripts/fix-rpath staging
+	$(TOPDIR)/support/scripts/fix-rpath host
+	$(TOPDIR)/support/scripts/fix-rpath staging
 	$(INSTALL) -m 755 $(TOPDIR)/support/misc/relocate-sdk.sh $(HOST_DIR)/relocate-sdk.sh
 	mkdir -p $(HOST_DIR)/share/buildroot
 	echo $(HOST_DIR) > $(HOST_DIR)/share/buildroot/sdk-location
@@ -698,9 +698,8 @@ define PURGE_LOCALES
 	rm -f $(LOCALE_WHITELIST)
 	for i in $(LOCALE_NOPURGE) locale-archive; do echo $$i >> $(LOCALE_WHITELIST); done

-	for dir in $(addprefix $(TARGET_DIR),/usr/share/locale /usr/share/X11/locale /usr/lib/locale); \
+	for dir in $(wildcard $(addprefix $(TARGET_DIR),/usr/share/locale /usr/share/X11/locale /usr/lib/locale)); \
 	do \
-		if [ ! -d $$dir ]; then continue; fi; \
 		for langdir in $$dir/*; \
 		do \
 			if [ -e "$${langdir}" ]; \
@@ -728,30 +727,23 @@ $(TARGETS_ROOTFS): target-finalize
 # Avoid the rootfs name leaking down the dependency chain
 target-finalize: ROOTFS=

-TARGET_DIR_FILES_LISTS = $(sort $(wildcard $(BUILD_DIR)/*/.files-list.txt))
-HOST_DIR_FILES_LISTS = $(sort $(wildcard $(BUILD_DIR)/*/.files-list-host.txt))
-STAGING_DIR_FILES_LISTS = $(sort $(wildcard $(BUILD_DIR)/*/.files-list-staging.txt))
-
-.PHONY: host-finalize
-host-finalize: $(PACKAGES) $(HOST_DIR) $(HOST_DIR_SYMLINK)
-	@$(call MESSAGE,"Finalizing host directory")
-	$(call per-package-rsync,$(sort $(PACKAGES)),host,$(HOST_DIR))
+host-finalize: $(HOST_DIR_SYMLINK)

 .PHONY: staging-finalize
-staging-finalize: $(STAGING_DIR_SYMLINK)
+staging-finalize:
+	@ln -snf $(STAGING_DIR) $(BASE_DIR)/staging

 .PHONY: target-finalize
-target-finalize: $(PACKAGES) $(TARGET_DIR) host-finalize
+target-finalize: $(PACKAGES) host-finalize
 	@$(call MESSAGE,"Finalizing target directory")
-	$(call per-package-rsync,$(sort $(PACKAGES)),target,$(TARGET_DIR))
+	# Check files that are touched by more than one package
 	$(foreach hook,$(TARGET_FINALIZE_HOOKS),$($(hook))$(sep))
 	rm -rf $(TARGET_DIR)/usr/include $(TARGET_DIR)/usr/share/aclocal \
 		$(TARGET_DIR)/usr/lib/pkgconfig $(TARGET_DIR)/usr/share/pkgconfig \
-		$(TARGET_DIR)/usr/lib/cmake $(TARGET_DIR)/usr/share/cmake \
-		$(TARGET_DIR)/usr/doc
+		$(TARGET_DIR)/usr/lib/cmake $(TARGET_DIR)/usr/share/cmake
 	find $(TARGET_DIR)/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f
 	find $(TARGET_DIR)/lib/ $(TARGET_DIR)/usr/lib/ $(TARGET_DIR)/usr/libexec/ \
-		\( -name '*.a' -o -name '*.la' -o -name '*.prl' \) -print0 | xargs -0 rm -f
+		\( -name '*.a' -o -name '*.la' \) -print0 | xargs -0 rm -f
 ifneq ($(BR2_PACKAGE_GDB),y)
 	rm -rf $(TARGET_DIR)/usr/share/gdb
 endif
@@ -784,7 +776,7 @@ endif
 	ln -sf ../usr/lib/os-release $(TARGET_DIR)/etc

 	@$(call MESSAGE,"Sanitizing RPATH in target tree")
-	PER_PACKAGE_DIR=$(PER_PACKAGE_DIR) $(TOPDIR)/support/scripts/fix-rpath target
+	$(TOPDIR)/support/scripts/fix-rpath target

 # For a merged /usr, ensure that /lib, /bin and /sbin and their /usr
 # counterparts are appropriately setup as symlinks ones to the others.
@@ -806,13 +798,6 @@ endif # merged /usr
 		$(call MESSAGE,"Copying overlay $(d)"); \
 		$(call SYSTEM_RSYNC,$(d),$(TARGET_DIR))$(sep))

-	$(if $(TARGET_DIR_FILES_LISTS), \
-		cat $(TARGET_DIR_FILES_LISTS)) > $(BUILD_DIR)/packages-file-list.txt
-	$(if $(HOST_DIR_FILES_LISTS), \
-		cat $(HOST_DIR_FILES_LISTS)) > $(BUILD_DIR)/packages-file-list-host.txt
-	$(if $(STAGING_DIR_FILES_LISTS), \
-		cat $(STAGING_DIR_FILES_LISTS)) > $(BUILD_DIR)/packages-file-list-staging.txt
-
 	@$(foreach s, $(call qstrip,$(BR2_ROOTFS_POST_BUILD_SCRIPT)), \
 		$(call MESSAGE,"Executing post-build script $(s)"); \
 		$(EXTRA_ENV) $(s) $(TARGET_DIR) $(call qstrip,$(BR2_ROOTFS_POST_SCRIPT_ARGS))$(sep))
@@ -1029,7 +1014,7 @@ savedefconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile

 # staging and target directories do NOT list these as
 # dependencies anywhere else
-$(BUILD_DIR) $(BASE_TARGET_DIR) $(HOST_DIR) $(BINARIES_DIR) $(LEGAL_INFO_DIR) $(REDIST_SOURCES_DIR_TARGET) $(REDIST_SOURCES_DIR_HOST) $(PER_PACKAGE_DIR):
+$(BUILD_DIR) $(BASE_TARGET_DIR) $(HOST_DIR) $(BINARIES_DIR) $(LEGAL_INFO_DIR) $(REDIST_SOURCES_DIR_TARGET) $(REDIST_SOURCES_DIR_HOST):
 	@mkdir -p $@

 # outputmakefile generates a Makefile in the output directory, if using a
@@ -1061,7 +1046,7 @@ printvars:
 clean:
 	rm -rf $(BASE_TARGET_DIR) $(BINARIES_DIR) $(HOST_DIR) $(HOST_DIR_SYMLINK) \
 		$(BUILD_DIR) $(BASE_DIR)/staging \
-		$(LEGAL_INFO_DIR) $(GRAPHS_DIR) $(PER_PACKAGE_DIR)
+		$(LEGAL_INFO_DIR) $(GRAPHS_DIR)

 .PHONY: distclean
 distclean: clean
--- a/arch/Config.in.arc
+++ b/arch/Config.in.arc
@@ -15,17 +15,11 @@ config BR2_archs38
 	bool "ARC HS38"
 	help
 	  Generic ARC HS capable of running Linux, i.e. with MMU,
-	  caches and 32-bit multiplier. Also it corresponds to the
-	  default configuration in older GNU toolchain versions.
+	  caches and multiplier. Also it corresponds to the default
+	  configuration in older GNU toolchain versions.

-config BR2_archs38_64mpy
-	bool "ARC HS38 with 64-bit mpy"
-	help
-	  Fully featured ARC HS capable of running Linux, i.e. with
-	  MMU, caches and 64-bit multiplier.
-
-	  If you're not sure which version of ARC HS core you build
-	  for use this one.
+	  If you're not sure which version of ARC HS core you  build for
+	  keep this one.

 config BR2_archs38_full
 	bool "ARC HS38 with Quad MAC & FPU"
@@ -49,7 +43,7 @@ endchoice
 # Choice of atomic instructions presence
 config BR2_ARC_ATOMIC_EXT
 	bool "Atomic extension (LLOCK/SCOND instructions)"
-	default y if BR2_arc770d || BR2_archs38 || BR2_archs38_64mpy || BR2_archs38_full || BR2_archs4x_rel31
+	default y if BR2_arc770d || BR2_archs38 || BR2_archs38_full || BR2_archs4x_rel31

 config BR2_ARCH
 	default "arc"	if BR2_arcle
@@ -67,13 +61,12 @@ config BR2_GCC_TARGET_CPU
 	default "arc700" if BR2_arc750d
 	default "arc700" if BR2_arc770d
 	default "archs"	 if BR2_archs38
-	default "hs38"	 if BR2_archs38_64mpy
 	default "hs38_linux"	 if BR2_archs38_full
 	default "hs4x_rel31"	 if BR2_archs4x_rel31

 config BR2_READELF_ARCH_NAME
 	default "ARCompact"	if BR2_arc750d || BR2_arc770d
-	default "ARCv2"		if BR2_archs38 || BR2_archs38_64mpy || BR2_archs38_full || BR2_archs4x_rel31
+	default "ARCv2"		if BR2_archs38 || BR2_archs38_full || BR2_archs4x_rel31

 choice
 	prompt "MMU Page Size"
@@ -93,7 +86,7 @@ choice

 config BR2_ARC_PAGE_SIZE_4K
 	bool "4KB"
-	depends on BR2_arc770d || BR2_archs38 || BR2_archs38_64mpy || BR2_archs38_full || BR2_archs4x_rel31
+	depends on BR2_arc770d || BR2_archs38 || BR2_archs38_full || BR2_archs4x_rel31

 config BR2_ARC_PAGE_SIZE_8K
 	bool "8KB"
@@ -103,7 +96,7 @@ config BR2_ARC_PAGE_SIZE_8K

 config BR2_ARC_PAGE_SIZE_16K
 	bool "16KB"
-	depends on BR2_arc770d || BR2_archs38 || BR2_archs38_64mpy || BR2_archs38_full || BR2_archs4x_rel31
+	depends on BR2_arc770d || BR2_archs38 || BR2_archs38_full || BR2_archs4x_rel31

 endchoice

--- a/arch/arch.mk.arc
+++ b/arch/arch.mk.arc
@@ -1,17 +1,4 @@
-ifeq ($(BR2_arc),y)
-
 # -matomic is always required when the ARC core has the atomic extensions
-ifeq ($(BR2_ARC_ATOMIC_EXT),y)
+ifeq ($(BR2_arc)$(BR2_ARC_ATOMIC_EXT),yy)
 ARCH_TOOLCHAIN_WRAPPER_OPTS = -matomic
 endif
-
-# Explicitly set LD's "max-page-size" instead of relying on some defaults
-ifeq ($(BR2_ARC_PAGE_SIZE_4K),y)
-ARCH_TOOLCHAIN_WRAPPER_OPTS += -Wl,-z,max-page-size=4096
-else ifeq ($(BR2_ARC_PAGE_SIZE_8K),y)
-ARCH_TOOLCHAIN_WRAPPER_OPTS += -Wl,-z,max-page-size=8192
-else ifeq ($(BR2_ARC_PAGE_SIZE_16K),y)
-ARCH_TOOLCHAIN_WRAPPER_OPTS += -Wl,-z,max-page-size=16384
-endif
-
-endif
--- a/board/beaglebone/linux-4.1-sgx.fragment
+++ b/board/beaglebone/linux-4.1-sgx.fragment
@@ -10,4 +10,3 @@ CONFIG_DRM_OMAP_WB_M2M=y
 CONFIG_DRM_TILCDC=y
 CONFIG_DRM_I2C_NXP_TDA998X=y
 CONFIG_DRM=y
-CONFIG_DRM_LEGACY=y
--- a/board/beaglebone/post-image.sh
+++ b/board/beaglebone/post-image.sh
@@ -0,0 +1,29 @@
+#!/bin/sh
+# post-image.sh for CircuitCo BeagleBone and TI am335x-evm
+# 2014, Marcin Jabrzyk <marcin.jabrzyk@gmail.com>
+# 2016, Lothar Felten <lothar.felten@gmail.com>
+
+BOARD_DIR="$(dirname $0)"
+
+# copy the uEnv.txt to the output/images directory
+cp board/beaglebone/uEnv.txt $BINARIES_DIR/uEnv.txt
+
+# the 4.1 kernel does not provide a dtb for beaglebone green, so we
+# use a different genimage config if am335x-bonegreen.dtb is not
+# built:
+if [ -e ${BINARIES_DIR}/am335x-bonegreen.dtb ] ; then
+	GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
+else
+	GENIMAGE_CFG="${BOARD_DIR}/genimage_linux41.cfg"
+fi
+
+GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
+
+rm -rf "${GENIMAGE_TMP}"
+
+genimage \
+    --rootpath "${TARGET_DIR}" \
+    --tmppath "${GENIMAGE_TMP}" \
+    --inputpath "${BINARIES_DIR}" \
+    --outputpath "${BINARIES_DIR}" \
+    --config "${GENIMAGE_CFG}"
--- a/board/beelink/gs1/extlinux.conf
+++ b/board/beelink/gs1/extlinux.conf
@@ -1,4 +0,0 @@
-label linux
-  kernel /Image
-  devicetree /sun50i-h6-beelink-gs1.dtb
-  append console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
--- a/board/beelink/gs1/genimage.cfg
+++ b/board/beelink/gs1/genimage.cfg
@@ -1,33 +0,0 @@
-image boot.vfat {
-	vfat {
-		files = {
-			"Image",
-			"sun50i-h6-beelink-gs1.dtb",
-			"extlinux"
-		}
-	}
-	size = 64M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition u-boot {
-		in-partition-table = "no"
-		image = "u-boot-sunxi-with-spl.bin"
-		offset = 8192
-		size = 1040384 # 1MB - 8192
-	}
-
-	partition boot {
-		partition-type = 0xC
-		bootable = "true"
-		image = "boot.vfat"
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-	}
-}
--- a/board/beelink/gs1/post-build.sh
+++ b/board/beelink/gs1/post-build.sh
@@ -1,4 +0,0 @@
-#!/bin/sh
-BOARD_DIR="$(dirname $0)"
-
-install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf
--- a/board/boundarydevices/common/boot.cmd
+++ b/board/boundarydevices/common/boot.cmd
@@ -9,9 +9,9 @@ if itest.s x51 == "x${imx_cpu}" ; then
 	a_base=0x90000000
 elif itest.s x53 == "x${imx_cpu}"; then
 	a_base=0x70000000
-elif itest.s x6SX == "x${imx_cpu}" || itest.s x6ULL == "x${imx_cpu}" || itest.s x7D == "x${imx_cpu}"; then
+elif itest.s x6SX == "x${imx_cpu}" || itest.s x7D == "x${imx_cpu}"; then
 	a_base=0x80000000
-elif itest.s x8MQ == "x${imx_cpu}" || itest.s x8MM == "x${imx_cpu}" || itest.s x8MMQ == "x${imx_cpu}" || itest.s x8MNano == "x${imx_cpu}"; then
+elif itest.s x8MQ == "x${imx_cpu}"; then
 	a_base=0x40000000
 	kernelimage=Image
 	bootcommand=booti
@@ -43,18 +43,10 @@ if itest.s "x" == "x${fdt_file}" ; then
 		fdt_file=imx6qp-${board}.dtb;
 	elif itest.s x6SX == "x${imx_cpu}" ; then
 		fdt_file=imx6sx-${board}${m4}.dtb;
-	elif itest.s x6ULL == "x${imx_cpu}" ; then
-		fdt_file=imx6ull-${board}.dtb;
 	elif itest.s x7D == "x${imx_cpu}" ; then
 		fdt_file=imx7d-${board}${m4}.dtb;
 	elif itest.s x8MQ == "x${imx_cpu}" ; then
 		fdt_file=imx8mq-${board}${m4}.dtb;
-	elif itest.s x8MM == "x${imx_cpu}" ; then
-		fdt_file=imx8mm-${board}${m4}.dtb;
-	elif itest.s x8MMQ == "x${imx_cpu}" ; then
-		fdt_file=imx8mm-${board}${m4}.dtb;
-	elif itest.s x8MNano == "x${imx_cpu}" ; then
-		fdt_file=imx8mn-${board}${m4}.dtb;
 	elif itest.s x51 == "x${imx_cpu}" ; then
 		fdt_file=imx51-${board}.dtb;
 	elif itest.s x53 == "x${imx_cpu}" ; then
@@ -71,6 +63,7 @@ fi
 if load ${devtype} ${devnum}:${distro_bootpart} ${a_script} uEnv.txt ; then
    env import -t ${a_script} ${filesize}
 fi
+
 setenv bootargs ${bootargs} console=${console},115200 vmalloc=400M consoleblank=0 rootwait fixrtc cpu=${imx_cpu} board=${board}

 if load ${devtype} ${devnum}:${distro_bootpart} ${a_fdt} ${prefix}${fdt_file} ; then
@@ -81,20 +74,21 @@ else
 	exit;
 fi

-fdt resize 4096
-if itest.s "x" != "x${cmd_board}" ; then
-	run cmd_board
-fi
+fdt resize
 if itest.s "x" != "x${cmd_custom}" ; then
 	run cmd_custom
 fi
 if itest.s "x" != "x${cmd_hdmi}" ; then
 	run cmd_hdmi
-	if itest.s x != x${allow_noncea} ; then
+	if itest.s x == x${allow_noncea} ; then
+		setenv bootargs ${bootargs} mxc_hdmi.only_cea=1;
+		echo "only CEA modes allowed on HDMI port";
+	else
 		setenv bootargs ${bootargs} mxc_hdmi.only_cea=0;
 		echo "non-CEA modes allowed on HDMI, audio may be affected";
 	fi
 fi
+
 if itest.s "x" != "x${cmd_lcd}" ; then
 	run cmd_lcd
 fi
--- a/board/boundarydevices/common/post-image.sh
+++ b/board/boundarydevices/common/post-image.sh
@@ -1,5 +1,16 @@
 #!/bin/sh

-support/scripts/genimage.sh -c $(dirname $0)/genimage.cfg
+BOARD_DIR="$(dirname $0)"
+GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
+GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
+
+rm -rf "${GENIMAGE_TMP}"
+
+genimage                           \
+	--rootpath "${TARGET_DIR}"     \
+	--tmppath "${GENIMAGE_TMP}"    \
+	--inputpath "${BINARIES_DIR}"  \
+	--outputpath "${BINARIES_DIR}" \
+	--config "${GENIMAGE_CFG}"

 exit $?
--- a/board/boundarydevices/common/readme.txt
+++ b/board/boundarydevices/common/readme.txt
@@ -1,6 +1,6 @@
 Buildroot for Boundary Devices platforms:

-https://boundarydevices.com/nitrogen-sbcs-and-soms/
+https://boundarydevices.com/product-category/popular-sbc-and-som-modules/

 Here is the list of targeted platforms per defconfig:

@@ -19,19 +19,7 @@ Here is the list of targeted platforms per defconfig:
 - nitrogen7_defconfig
  - Nitrogen7

- nitrogen8m_defconfig
-  - Nitrogen8M
-  - Nitrogen8M_SOM
-
- nitrogen8mm_defconfig
-  - Nitrogen8MMini
-  - Nitrogen8MMini_SOM
-
- nitrogen8mn_defconfig
-  - Nitrogen8MNano
-  - Nitrogen8MNano_SOM
-
-To install, simply copy the image to your storage (SD, eMMC, USB):
+To install, simply copy the image to a uSD card:

 $ sudo dd if=output/images/sdcard.img of=/dev/sdX

--- a/board/boundarydevices/common/upgrade.cmd
+++ b/board/boundarydevices/common/upgrade.cmd
@@ -13,14 +13,11 @@ if itest.s x51 == "x${imx_cpu}"; then
 	a_base=0x92000000
 elif itest.s x53 == "x${imx_cpu}"; then
 	a_base=0x72000000
-elif itest.s x6SX == "x${imx_cpu}" || itest.s x6ULL == "x${imx_cpu}" || itest.s x7D == "x${imx_cpu}"; then
+elif itest.s x6SX == "x${imx_cpu}" || itest.s x7D == "x${imx_cpu}"; then
 	a_base=0x82000000
-elif itest.s x8MQ == "x${imx_cpu}" || itest.s x8MM == "x${imx_cpu}" || itest.s x8MMQ == "x${imx_cpu}"; then
+elif itest.s x8MQ == "x${imx_cpu}"; then
 	a_base=0x42000000
 	offset=0x8400
-elif itest.s x8MNano == "x${imx_cpu}"; then
-	a_base=0x42000000
-	offset=0x8000
 fi

 qspi_match=1
@@ -59,7 +56,6 @@ mmc dev ${env_dev} ${env_part}
 mmc read ${a_uImage2} ${cntoffset} ${cntfile}
 if cmp.b ${a_uImage1} ${a_uImage2} ${filesize} ; then
 	echo "------- U-Boot versions match" ;
-	echo "------- U-Boot upgrade NOT needed" ;
 	exit ;
 fi

@@ -138,7 +134,7 @@ fi
 if cmp.b ${a_uImage1} ${a_uImage2} $filesize ; then
 	echo "------- U-Boot versions match" ;
 	if itest.s "${qspi_match}" == "1" ; then
-		echo "------- U-Boot upgrade NOT needed" ;
+		echo "------- upgrade not needed" ;
 		if itest.s "x" != "x${next}" ; then
 			if ${fs}load ${devtype} ${devnum}:${distro_bootpart} ${a_script} ${next} ; then
 				source ${a_script}
@@ -210,12 +206,6 @@ if itest.s "x" != "x${next}" ; then
 fi
 fi

-if itest.s "xno" == "x${reset}" ; then
-	while echo "---- U-Boot upgraded. Please reset the board" ; do
-		sleep 120
-	done
-fi
-echo "---- U-Boot upgraded. The board will now reset."
-sleep 1
-reset
+while echo "---- U-Boot upgraded. Please reset the board" ; do
+	sleep 120
 done
--- a/board/ci20/genimage.cfg
+++ b/board/ci20/genimage.cfg
@@ -24,5 +24,6 @@ image sdcard.img {
        partition-type = 0x83
        image = "rootfs.ext4"
        offset = 2M
+        size = 60M
    }
 }
--- a/board/engicam/icorem6/rootfs_overlay/root/imx6qdl-icore-ofcap10.json
+++ b/board/engicam/icorem6/rootfs_overlay/root/imx6qdl-icore-ofcap10.json
@@ -4,7 +4,7 @@
  "pbuffers": true,
  "outputs": [
    {
-      "name": "LVDS1",
+      "name": "LVDS-1",
      "mode": "1280x800"
    }
  ]
--- a/board/engicam/icorem6/rootfs_overlay/root/imx6qdl-icore-ofcap12.json
+++ b/board/engicam/icorem6/rootfs_overlay/root/imx6qdl-icore-ofcap12.json
@@ -4,7 +4,7 @@
  "pbuffers": true,
  "outputs": [
    {
-      "name": "LVDS1",
+      "name": "LVDS-1",
      "mode": "1280x480"
    }
  ]
--- a/board/engicam/icorem6/rootfs_overlay/root/imx6qdl-icore.json
+++ b/board/engicam/icorem6/rootfs_overlay/root/imx6qdl-icore.json
@@ -4,7 +4,7 @@
  "pbuffers": true,
  "outputs": [
    {
-      "name": "LVDS1",
+      "name": "LVDS-1",
      "mode": "800x480"
    }
  ]
--- a/board/firefly/roc-rk3399-pc/extlinux.conf
+++ b/board/firefly/roc-rk3399-pc/extlinux.conf
@@ -1,4 +0,0 @@
-label RK3399RocPC linux
-  kernel /boot/Image
-  devicetree /boot/rk3399-roc-pc.dtb
-  append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk0p1 rootwait
--- a/board/firefly/roc-rk3399-pc/genimage.cfg
+++ b/board/firefly/roc-rk3399-pc/genimage.cfg
@@ -1,22 +0,0 @@
-image sdcard.img {
-	hdimage {
-	}
-
-	partition u-boot-tpl-spl-dtb {
-		in-partition-table = "no"
-		image = "idbloader.img"
-		offset = 32K
-	}
-
-	partition u-boot-dtb {
-		in-partition-table = "no"
-		image = "u-boot.itb"
-		offset = 8M
-		size = 30M
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-	}
-}
--- a/board/firefly/roc-rk3399-pc/post-build.sh
+++ b/board/firefly/roc-rk3399-pc/post-build.sh
@@ -1,5 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname $0)"
-
-install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf
--- a/board/firefly/roc-rk3399-pc/readme.txt
+++ b/board/firefly/roc-rk3399-pc/readme.txt
@@ -1,40 +0,0 @@
-Libre Computer Board ROC-RK3399-PC
-===================================
-
-Build:
-
-  $ make roc_pc_rk3399_defconfig
-  $ make
-
-Files created in output directory
-=================================
-
-output/images
-
-├── bl31.elf
-├── idbloader.img
-├── Image
-├── rk3399-roc-pc.dtb
-├── rootfs.ext2
-├── rootfs.ext4 -> rootfs.ext2
-├── rootfs.tar
-├── sdcard.img
-├── u-boot.bin
-└── u-boot.itb
-
-Creating bootable SD card:
-==========================
-
-Simply invoke (as root)
-
-sudo dd if=output/images/sdcard.img of=/dev/sdX && sync
-
-Where X is your SD card device
-
-Serial console
--------------
-
-Baudrate for this board is 1500000
-
-Wiki link:
-https://wiki.amarulasolutions.com/bsp/rockchip/rk3399/roc-rk3399-pc.html
--- a/board/freescale/common/imx/genimage.cfg.template
+++ b/board/freescale/common/imx/genimage.cfg.template
@@ -9,7 +9,6 @@

 image boot.vfat {
  vfat {
-    label = "boot"
    files = {
      %FILES%
    }
--- a/board/freescale/common/imx/genimage.cfg.template_imx8
+++ b/board/freescale/common/imx/genimage.cfg.template_imx8
@@ -9,7 +9,6 @@

 image boot.vfat {
  vfat {
-    label = "boot"
    files = {
      %FILES%
    }
--- a/board/freescale/common/imx/genimage.cfg.template_spl
+++ b/board/freescale/common/imx/genimage.cfg.template_spl
@@ -9,7 +9,6 @@

 image boot.vfat {
  vfat {
-    label = "boot"
    files = {
      %FILES%
    }
--- a/board/freescale/common/imx/imx8-bootloader-prepare.sh
+++ b/board/freescale/common/imx/imx8-bootloader-prepare.sh
@@ -22,23 +22,13 @@ main ()
 		rm -f ${BINARIES_DIR}/u-boot.its

 		${HOST_DIR}/bin/mkimage_imx8 -fit -loader ${BINARIES_DIR}/u-boot-spl-ddr.bin 0x7E1000 -second_loader ${BINARIES_DIR}/u-boot.itb 0x40200000 0x60000 -out ${BINARIES_DIR}/imx8-boot-sd.bin
-	elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN=y$" ${BR2_CONFIG}; then
-		cat ${BINARIES_DIR}/u-boot-spl.bin ${BINARIES_DIR}/lpddr4_pmu_train_fw.bin > ${BINARIES_DIR}/u-boot-spl-ddr.bin
-		BL31=${BINARIES_DIR}/bl31.bin BL33=${BINARIES_DIR}/u-boot-nodtb.bin ATF_LOAD_ADDR=0x00960000 ${HOST_DIR}/bin/mkimage_fit_atf.sh ${UBOOT_DTB} > ${BINARIES_DIR}/u-boot.its
-		${HOST_DIR}/bin/mkimage -E -p 0x3000 -f ${BINARIES_DIR}/u-boot.its ${BINARIES_DIR}/u-boot.itb
-		rm -f ${BINARIES_DIR}/u-boot.its
-
-		${HOST_DIR}/bin/mkimage_imx8 -v v2 -fit -loader ${BINARIES_DIR}/u-boot-spl-ddr.bin 0x912000 -second_loader ${BINARIES_DIR}/u-boot.itb 0x40200000 0x60000 -out ${BINARIES_DIR}/imx8-boot-sd.bin
 	else
 		${HOST_DIR}/bin/mkimage_imx8 -commit > ${BINARIES_DIR}/mkimg.commit
 		cat ${BINARIES_DIR}/u-boot.bin ${BINARIES_DIR}/mkimg.commit > ${BINARIES_DIR}/u-boot-hash.bin
 		cp ${BINARIES_DIR}/bl31.bin ${BINARIES_DIR}/u-boot-atf.bin
 		dd if=${BINARIES_DIR}/u-boot-hash.bin of=${BINARIES_DIR}/u-boot-atf.bin bs=1K seek=128
-		if grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8=y$" ${BR2_CONFIG}; then
-			${HOST_DIR}/bin/mkimage_imx8 -soc QM -rev B0 -append ${BINARIES_DIR}/ahab-container.img -c -scfw ${BINARIES_DIR}/mx8qm-mek-scfw-tcm.bin -ap ${BINARIES_DIR}/u-boot-atf.bin a53 0x80000000 -out ${BINARIES_DIR}/imx8-boot-sd.bin
-		else
-			${HOST_DIR}/bin/mkimage_imx8 -soc QX -rev B0 -append ${BINARIES_DIR}/ahab-container.img -c -scfw ${BINARIES_DIR}/mx8qx-mek-scfw-tcm.bin -ap ${BINARIES_DIR}/u-boot-atf.bin a35 0x80000000 -out ${BINARIES_DIR}/imx8-boot-sd.bin
-		fi
+
+		${HOST_DIR}/bin/mkimage_imx8 -soc QX -rev B0 -append ${BINARIES_DIR}/ahab-container.img -c -scfw ${BINARIES_DIR}/mx8qx-mek-scfw-tcm.bin -ap ${BINARIES_DIR}/u-boot-atf.bin a35 0x80000000 -out ${BINARIES_DIR}/imx8-boot-sd.bin
 	fi

 	exit $?
--- a/board/freescale/common/imx/post-image.sh
+++ b/board/freescale/common/imx/post-image.sh
@@ -32,9 +32,7 @@ linux_image()

 genimage_type()
 {
-	if grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8=y$" ${BR2_CONFIG}; then
-		echo "genimage.cfg.template_imx8"
-	elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M=y$" ${BR2_CONFIG}; then
+	if grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M=y$" ${BR2_CONFIG}; then
 		echo "genimage.cfg.template_imx8"
 	elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MM=y$" ${BR2_CONFIG}; then
 		echo "genimage.cfg.template_imx8"
--- a/board/freescale/common/mxs/genimage.cfg.template
+++ b/board/freescale/common/mxs/genimage.cfg.template
@@ -8,7 +8,6 @@

 image boot.vfat {
 	vfat {
-		label = "boot"
 		files = {
 			%FILES%
 		}
--- a/board/freescale/imx6-sabresd/linux_qt5.fragment
+++ b/board/freescale/imx6-sabresd/linux_qt5.fragment
@@ -2,3 +2,4 @@
 # ondemand governor with a mainline kernel.
 # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+CONFIG_VIDEO_CODA=m
--- a/board/freescale/imx6sabre/patches/uboot/0002-imx-Create-distinct-pre-processed-mkimage-config-fil.patch
+++ b/board/freescale/imx6sabre/patches/uboot/0002-imx-Create-distinct-pre-processed-mkimage-config-fil.patch
@@ -0,0 +1,89 @@
+From 27a2cd6a1980adf3002412678c8fdec6528dc47d Mon Sep 17 00:00:00 2001
+From: Trent Piepho <tpiepho@impinj.com>
+Date: Fri, 6 Apr 2018 17:11:27 -0700
+Subject: [PATCH] imx: Create distinct pre-processed mkimage config files
+
+Each imx image is created by a separate sub-make and during this process
+the mkimage config file is run though cpp.
+
+The cpp output is to the same file no matter what imx image is being
+created.
+
+This means if two imx images are generated in parallel they will attempt
+to independently produce the same pre-processed mkimage config file at
+the same time.
+
+Avoid the problem by making the pre-processed config file name unique
+based on the imx image it will be used in.  This way each image will
+create a unique config file and they won't clobber each other when run
+in parallel.
+
+This should fixed the build bug referenced in b5b0e4e3 ("imximage:
+Remove failure when no IVT offset is found").
+
+Cc: Breno Lima <breno.lima@nxp.com>
+Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
+Cc: Fabio Estevam <fabio.estevam@nxp.com>
+Signed-off-by: Trent Piepho <tpiepho@impinj.com>
+Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
+[fabio: Adapted to imx_v2017.03_4.9.11_1.0.0_ga]
+Signed-off-by: Fabio Estevam <festevam@gmail.com>
+---
+ arch/arm/imx-common/Makefile | 15 ++++++++-------
+ 1 file changed, 8 insertions(+), 7 deletions(-)
+
+diff --git a/arch/arm/imx-common/Makefile b/arch/arm/imx-common/Makefile
+index d862258..f1bae8d 100644
+--- a/arch/arm/imx-common/Makefile
+++ b/arch/arm/imx-common/Makefile
+@@ -69,9 +69,11 @@ endif
+ quiet_cmd_cpp_cfg = CFGS    $@
+       cmd_cpp_cfg = $(CPP) $(cpp_flags) -x c -o $@ $<
+ 
+-IMX_CONFIG = $(CONFIG_IMX_CONFIG:"%"=%).cfgtmp
+# mkimage source config file
+IMX_CONFIG = $(CONFIG_IMX_CONFIG:"%"=%)
+ 
+-$(IMX_CONFIG): %.cfgtmp: % FORCE
+# How to create a cpp processed config file, they all use the same source
+%.cfgout: $(IMX_CONFIG) FORCE
+ 	$(Q)mkdir -p $(dir $@)
+ 	$(call if_changed_dep,cpp_cfg)
+ 
+@@ -79,7 +81,7 @@ MKIMAGEFLAGS_u-boot.imx = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) -T imxim
+ 	-e $(CONFIG_SYS_TEXT_BASE)
+ u-boot.imx: MKIMAGEOUTPUT = u-boot.imx.log
+ 
+-u-boot.imx: u-boot.bin $(IMX_CONFIG) $(PLUGIN).bin FORCE
+u-boot.imx: u-boot.bin u-boot.cfgout $(PLUGIN).bin FORCE
+ 	$(call if_changed,mkimage)
+ 
+ ifeq ($(CONFIG_OF_SEPARATE),y)
+@@ -87,16 +89,15 @@ MKIMAGEFLAGS_u-boot-dtb.imx = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) -T i
+ 	-e $(CONFIG_SYS_TEXT_BASE)
+ u-boot-dtb.imx: MKIMAGEOUTPUT = u-boot-dtb.imx.log
+ 
+-u-boot-dtb.imx: u-boot-dtb.bin $(IMX_CONFIG) $(PLUGIN).bin FORCE
+u-boot-dtb.imx: u-boot-dtb.bin u-boot-dtb.cfgout $(PLUGIN).bin FORCE
+ 	$(call if_changed,mkimage)
+ endif
+ 
+ MKIMAGEFLAGS_SPL = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) -T imximage \
+ 	-e $(CONFIG_SPL_TEXT_BASE)
+-
+ SPL: MKIMAGEOUTPUT = SPL.log
+ 
+-SPL: spl/u-boot-spl.bin $(IMX_CONFIG) $(PLUGIN).bin FORCE
+SPL: spl/u-boot-spl.bin spl/u-boot-spl.cfgout $(PLUGIN).bin FORCE
+ 	$(call if_changed,mkimage)
+ 
+ MKIMAGEFLAGS_u-boot.uim = -A arm -O U-Boot -a $(CONFIG_SYS_TEXT_BASE) \
+@@ -124,4 +125,4 @@ cmd_u-boot-nand-spl_imx = (printf '\000\000\000\000\106\103\102\040\001' && \
+ spl/u-boot-nand-spl.imx: SPL FORCE
+ 	$(call if_changed,u-boot-nand-spl_imx)
+ 
+-targets += $(addprefix ../../../,$(IMX_CONFIG) SPL u-boot.uim spl/u-boot-nand-spl.imx)
+targets += $(addprefix ../../../,SPL spl/u-boot-spl.cfgout u-boot-dtb.cfgout u-boot.cfgout u-boot.uim spl/u-boot-nand-spl.imx)
+-- 
+2.7.4
+
--- a/board/freescale/imx6sabre/patches/uboot/uboot-0001-mx6qsabre_common-boot-Linux-to-init-in-mfgtools-mode.patch
+++ b/board/freescale/imx6sabre/patches/uboot/uboot-0001-mx6qsabre_common-boot-Linux-to-init-in-mfgtools-mode.patch
@@ -1,4 +1,4 @@
-From e9b507b695331ef6fa941b471be0a7f284ec6980 Mon Sep 17 00:00:00 2001
+From 90ecc0ad14337898b75843efc6530fc4a34f7808 Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Vincent=20Stehl=C3=A9?= <vincent.stehle@freescale.com>
 Date: Tue, 12 Aug 2014 10:17:31 +0200
 Subject: [PATCH] mx6qsabre_common: boot Linux to /init in mfgtools mode
@@ -14,24 +14,23 @@ This patch tells u-boot to tell the kernel to boot into /init (instead of
 buildroot system entirely through USB.

 Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com>
-Signed-off-by: Julien Olivain <julien.olivain@oss.nxp.com>
 ---
- include/configs/imx_env.h | 2 +-
+ include/configs/mx6sabre_common.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

-diff --git a/include/configs/imx_env.h b/include/configs/imx_env.h
-index 234af33e55..7e31d208dc 100644
--- a/include/configs/imx_env.h
-+++ b/include/configs/imx_env.h
-@@ -20,7 +20,7 @@
+diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h
+index 93d4c4b..d2e7efd 100644
+--- a/include/configs/mx6sabre_common.h
+++ b/include/configs/mx6sabre_common.h
+@@ -52,7 +52,7 @@
 
- #define CONFIG_MFG_ENV_SETTINGS_DEFAULT \
- 	"mfgtool_args=setenv bootargs console=${console},${baudrate} " \
+ #define CONFIG_MFG_ENV_SETTINGS \
+ 	"mfgtool_args=setenv bootargs console=" CONSOLE_DEV ",115200 " \
 -		"rdinit=/linuxrc " \
 +		"rdinit=/init " \
- 		"clk_ignore_unused "\
- 		"\0" \
- 	"kboot="MFG_BOOT_CMD"\0"\
+ 		"g_mass_storage.stall=0 g_mass_storage.removable=1 " \
+ 		"g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\
+ 		"g_mass_storage.iSerialNumber=\"\" "\
 -- 
-2.25.1
+2.1.4

--- a/board/freescale/imx6ullevk/readme.txt
+++ b/board/freescale/imx6ullevk/readme.txt
@@ -1,61 +0,0 @@
-****************************
-Freescale i.MX6ULL EVK board
-****************************
-
-This file documents the Buildroot support for the Freescale i.MX6ULL EVK board.
-
-Build
-=====
-
-First, configure Buildroot for your i.MX6ULL EVK board:
-
-  make freescale_imx6ullevk_defconfig
-
-Build all components:
-
-  make
-
-You will find in output/images/ the following files:
-  - boot.vfat
-  - imx6ull-14x14-evk.dtb
-  - rootfs.ext2
-  - rootfs.ext4
-  - rootfs.tar
-  - sdcard.img
-  - u-boot.bin
-  - u-boot.imx
-  - zImage
-
-Create a bootable SD card
-=========================
-
-To determine the device associated to the SD card have a look in the
-/proc/partitions file:
-
-  cat /proc/partitions
-
-Buildroot prepares a bootable "sdcard.img" image in the output/images/
-directory, ready to be dumped on a SD card. Launch the following
-command as root:
-
-  dd if=./output/images/sdcard.img of=/dev/<your-sd-device>
-
-*** WARNING! This will destroy all the card content. Use with care! ***
-
-For details about the medium image layout, see the definition in
-board/freescale/common/imx/genimage.cfg.template.
-
-Boot the i.MX6ULL EVK board
-===========================
-
-To boot your newly created system (refer to the i.MX 6ULL EVK Quick Start Guide [1] for guidance):
- insert the SD card in the micro SD slot of the board;
- put a micro USB cable into the Debug USB Port and connect using a terminal
-  emulator at 115200 bps, 8n1;
- power on the board.
-
-Enjoy!
-
-References
-==========
-[1] https://www.nxp.com/files-static/32bit/doc/brochure/IMX6ULLQSG.pdf
--- a/board/freescale/imx7dsdb/patches/uboot/0001-imx-Create-distinct-pre-processed-mkimage-config-fil.patch
+++ b/board/freescale/imx7dsdb/patches/uboot/0001-imx-Create-distinct-pre-processed-mkimage-config-fil.patch
@@ -0,0 +1,89 @@
+From 27a2cd6a1980adf3002412678c8fdec6528dc47d Mon Sep 17 00:00:00 2001
+From: Trent Piepho <tpiepho@impinj.com>
+Date: Fri, 6 Apr 2018 17:11:27 -0700
+Subject: [PATCH] imx: Create distinct pre-processed mkimage config files
+
+Each imx image is created by a separate sub-make and during this process
+the mkimage config file is run though cpp.
+
+The cpp output is to the same file no matter what imx image is being
+created.
+
+This means if two imx images are generated in parallel they will attempt
+to independently produce the same pre-processed mkimage config file at
+the same time.
+
+Avoid the problem by making the pre-processed config file name unique
+based on the imx image it will be used in.  This way each image will
+create a unique config file and they won't clobber each other when run
+in parallel.
+
+This should fixed the build bug referenced in b5b0e4e3 ("imximage:
+Remove failure when no IVT offset is found").
+
+Cc: Breno Lima <breno.lima@nxp.com>
+Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
+Cc: Fabio Estevam <fabio.estevam@nxp.com>
+Signed-off-by: Trent Piepho <tpiepho@impinj.com>
+Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
+[fabio: Adapted to imx_v2017.03_4.9.11_1.0.0_ga]
+Signed-off-by: Fabio Estevam <festevam@gmail.com>
+---
+ arch/arm/imx-common/Makefile | 15 ++++++++-------
+ 1 file changed, 8 insertions(+), 7 deletions(-)
+
+diff --git a/arch/arm/imx-common/Makefile b/arch/arm/imx-common/Makefile
+index d862258..f1bae8d 100644
+--- a/arch/arm/imx-common/Makefile
+++ b/arch/arm/imx-common/Makefile
+@@ -69,9 +69,11 @@ endif
+ quiet_cmd_cpp_cfg = CFGS    $@
+       cmd_cpp_cfg = $(CPP) $(cpp_flags) -x c -o $@ $<
+ 
+-IMX_CONFIG = $(CONFIG_IMX_CONFIG:"%"=%).cfgtmp
+# mkimage source config file
+IMX_CONFIG = $(CONFIG_IMX_CONFIG:"%"=%)
+ 
+-$(IMX_CONFIG): %.cfgtmp: % FORCE
+# How to create a cpp processed config file, they all use the same source
+%.cfgout: $(IMX_CONFIG) FORCE
+ 	$(Q)mkdir -p $(dir $@)
+ 	$(call if_changed_dep,cpp_cfg)
+ 
+@@ -79,7 +81,7 @@ MKIMAGEFLAGS_u-boot.imx = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) -T imxim
+ 	-e $(CONFIG_SYS_TEXT_BASE)
+ u-boot.imx: MKIMAGEOUTPUT = u-boot.imx.log
+ 
+-u-boot.imx: u-boot.bin $(IMX_CONFIG) $(PLUGIN).bin FORCE
+u-boot.imx: u-boot.bin u-boot.cfgout $(PLUGIN).bin FORCE
+ 	$(call if_changed,mkimage)
+ 
+ ifeq ($(CONFIG_OF_SEPARATE),y)
+@@ -87,16 +89,15 @@ MKIMAGEFLAGS_u-boot-dtb.imx = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) -T i
+ 	-e $(CONFIG_SYS_TEXT_BASE)
+ u-boot-dtb.imx: MKIMAGEOUTPUT = u-boot-dtb.imx.log
+ 
+-u-boot-dtb.imx: u-boot-dtb.bin $(IMX_CONFIG) $(PLUGIN).bin FORCE
+u-boot-dtb.imx: u-boot-dtb.bin u-boot-dtb.cfgout $(PLUGIN).bin FORCE
+ 	$(call if_changed,mkimage)
+ endif
+ 
+ MKIMAGEFLAGS_SPL = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) -T imximage \
+ 	-e $(CONFIG_SPL_TEXT_BASE)
+-
+ SPL: MKIMAGEOUTPUT = SPL.log
+ 
+-SPL: spl/u-boot-spl.bin $(IMX_CONFIG) $(PLUGIN).bin FORCE
+SPL: spl/u-boot-spl.bin spl/u-boot-spl.cfgout $(PLUGIN).bin FORCE
+ 	$(call if_changed,mkimage)
+ 
+ MKIMAGEFLAGS_u-boot.uim = -A arm -O U-Boot -a $(CONFIG_SYS_TEXT_BASE) \
+@@ -124,4 +125,4 @@ cmd_u-boot-nand-spl_imx = (printf '\000\000\000\000\106\103\102\040\001' && \
+ spl/u-boot-nand-spl.imx: SPL FORCE
+ 	$(call if_changed,u-boot-nand-spl_imx)
+ 
+-targets += $(addprefix ../../../,$(IMX_CONFIG) SPL u-boot.uim spl/u-boot-nand-spl.imx)
+targets += $(addprefix ../../../,SPL spl/u-boot-spl.cfgout u-boot-dtb.cfgout u-boot.cfgout u-boot.uim spl/u-boot-nand-spl.imx)
+-- 
+2.7.4
+
--- a/board/freescale/imx8qmmek/readme.txt
+++ b/board/freescale/imx8qmmek/readme.txt
@@ -1,76 +0,0 @@
-***************************
-Freescale i.MX8QM MEK board
-***************************
-
-This file documents the Buildroot support for the NXP i.MX8QM MEK board.
-
-You will find a reference to the board on nxp.com:
-https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/i.mx-8quadmax-multisensory-enablement-kit-mek:MCIMX8QM-CPU
-
-You can also find the get started guide here:
-https://www.nxp.com/document/guide/get-started-with-the-i.mx-8quadmax-mek:GS-iMX-8QM-MEK
-
-Build
-=====
-
-First, configure Buildroot for the i.MX8QM MEK board:
-
-$ make freescale_imx8qmmek_defconfig
-
-Build all components:
-
-$ make
-
-You will find in output/images/ the following files:
-  - ahab-container.img
-  - bl31.bin
-  - boot.vfat
-  - fsl-imx8qm-mek.dtb
-  - Image
-  - imx8-boot-sd.bin
-  - mkimg.commit
-  - mx8qm-mek-scfw-tcm.bin
-  - mx8qm-val-scfw-tcm.bin
-  - mx8qm-a0-ddr4-scfw-tcm.bin
-  - mx8qm-a0-mek-scfw-tcm.bin
-  - mx8qm-a0-val-scfw-tcm.bin
-  - mx8qm-ddr4-scfw-tcm.bin
-  - rootfs.ext2
-  - rootfs.ext4
-  - rootfs.tar
-  - sdcard.img
-  - u-boot-atf.bin
-  - u-boot.bin
-  - u-boot-hash.bin
-
-Create a bootable SD card
-=========================
-
-To determine the device associated to the SD card have a look in the
-/proc/partitions file:
-
-  cat /proc/partitions
-
-Buildroot prepares a bootable "sdcard.img" image in the output/images/
-directory, ready to be dumped on a SD card. Launch the following
-command as root:
-
-  dd if=output/images/sdcard.img of=/dev/<your-sd-device>
-
-*** WARNING! This will destroy all the card content. Use with care! ***
-
-For details about the medium image layout, see the definition in
-board/freescale/common/imx/genimage.cfg.template_imx8.
-
-Boot the i.MX8QM MEK board
-==========================
-
-To boot your newly created system:
- insert the SD card in the SD slot of the board;
- Configure the boot switch as follows:
-SW2:	OFF	OFF	ON	ON	OFF	OFF
- put a micro USB cable into the Debug USB Port and connect using a terminal
-  emulator at 115200 bps, 8n1;
- power on the board.
-
-Enjoy!
--- a/board/friendlyarm/nanopi-neo-plus2/boot.cmd
+++ b/board/friendlyarm/nanopi-neo-plus2/boot.cmd
@@ -0,0 +1,6 @@
+setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
+
+fatload mmc 0 $kernel_addr_r Image
+fatload mmc 0 $fdt_addr_r sun50i-h5-nanopi-neo-plus2.dtb
+
+booti $kernel_addr_r - $fdt_addr_r
--- a/board/friendlyarm/nanopi-neo-plus2/extlinux.conf
+++ b/board/friendlyarm/nanopi-neo-plus2/extlinux.conf
@@ -1,4 +0,0 @@
-label linux
-  kernel /Image
-  devicetree /sun50i-h5-nanopi-neo-plus2.dtb
-  append console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
--- a/board/friendlyarm/nanopi-neo-plus2/genimage.cfg
+++ b/board/friendlyarm/nanopi-neo-plus2/genimage.cfg
@@ -3,7 +3,7 @@ image boot.vfat {
 		files = {
 			"Image",
 			"sun50i-h5-nanopi-neo-plus2.dtb",
-			"extlinux"
+			"boot.scr"
 		}
 	}
 	size = 64M
--- a/board/friendlyarm/nanopi-neo-plus2/post-build.sh
+++ b/board/friendlyarm/nanopi-neo-plus2/post-build.sh
@@ -1,4 +0,0 @@
-#!/bin/sh
-BOARD_DIR="$(dirname $0)"
-
-install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf
--- a/board/friendlyarm/nanopi-neo/genimage.cfg
+++ b/board/friendlyarm/nanopi-neo/genimage.cfg
@@ -29,5 +29,6 @@ image sdcard.img {
 	partition rootfs {
 		partition-type = 0x83
 		image = "rootfs.ext4"
+		size = 32M
 	}
 }
--- a/board/friendlyarm/nanopi-neo/post-build.sh
+++ b/board/friendlyarm/nanopi-neo/post-build.sh
@@ -0,0 +1,12 @@
+#!/bin/sh
+# post-build.sh for Nanopi NEO, based on the Orange Pi PC
+# 2013, Carlo Caione <carlo.caione@gmail.com>
+# 2016, "Yann E. MORIN" <yann.morin.1998@free.fr>
+
+BOARD_DIR="$( dirname "${0}" )"
+MKIMAGE="${HOST_DIR}/bin/mkimage"
+BOOT_CMD="${BOARD_DIR}/boot.cmd"
+BOOT_CMD_H="${BINARIES_DIR}/boot.scr"
+
+# U-Boot script
+"${MKIMAGE}" -C none -A arm -T script -d "${BOOT_CMD}" "${BOOT_CMD_H}"
--- a/board/friendlyarm/nanopi-neo/post-image.sh
+++ b/board/friendlyarm/nanopi-neo/post-image.sh
@@ -0,0 +1,15 @@
+#!/bin/sh
+# post-image.sh for Nanopi NEO, based on the Orange Pi PC
+
+BOARD_DIR="$( dirname "${0}" )"
+GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
+GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
+
+rm -rf "${GENIMAGE_TMP}"
+
+genimage                               \
+	--rootpath "${TARGET_DIR}"     \
+	--tmppath "${GENIMAGE_TMP}"    \
+	--inputpath "${BINARIES_DIR}"  \
+	--outputpath "${BINARIES_DIR}" \
+	--config "${GENIMAGE_CFG}"
--- a/board/friendlyarm/nanopi-neo4/extlinux.conf
+++ b/board/friendlyarm/nanopi-neo4/extlinux.conf
@@ -1,4 +0,0 @@
-label NanoPi Neo4 linux
-  kernel /boot/Image
-  devicetree /boot/rk3399-nanopi-neo4.dtb
-  append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk1p1 rootwait
--- a/board/friendlyarm/nanopi-neo4/genimage.cfg
+++ b/board/friendlyarm/nanopi-neo4/genimage.cfg
@@ -1,22 +0,0 @@
-image sdcard.img {
-	hdimage {
-	}
-
-	partition u-boot-tpl-spl-dtb {
-		in-partition-table = "no"
-		image = "idbloader.img"
-		offset = 32K
-	}
-
-	partition u-boot-dtb {
-		in-partition-table = "no"
-		image = "u-boot.itb"
-		offset = 8M
-		size = 30M
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-	}
-}
--- a/board/friendlyarm/nanopi-neo4/post-build.sh
+++ b/board/friendlyarm/nanopi-neo4/post-build.sh
@@ -1,5 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname $0)"
-
-install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf
--- a/board/friendlyarm/nanopi-neo4/readme.txt
+++ b/board/friendlyarm/nanopi-neo4/readme.txt
@@ -1,53 +0,0 @@
-Intro
-=====
-
-NanoPi Neo4 is a RK3399 SoC based ARM64 board.
-
-
-Official wiki: http://wiki.friendlyarm.com/wiki/index.php/NanoPi_NEO4
-Mainline wiki: https://wiki.amarulasolutions.com/bsp/rockchip/rk3399/neo4.html
-
-Build
-=====
-
-Run NanoPi Neo4 configuration
-
-  $ make nanopi_neo4_defconfig
-
-To build, run make comamnd.
-
-  $ make
-
-Files created in output directory
-=================================
-
-output/images
-
-├── bl31.bin
-├── bl31.elf
-├── Image
-├── rk3399-nanopi-neo4.dtb
-├── rootfs.ext2
-├── rootfs.ext4 -> rootfs.ext2
-├── rootfs.tar
-├── sdcard.img
-├── u-boot.bin
-├── u-boot.itb
-├── u-boot-spl-dtb.bin
-├── u-boot-tpl-dtb.bin
-├── u-boot-tpl-dtb.img
-└── u-boot-tpl-spl-dtb.img
-
-Creating bootable SD card:
-=========================
-
-Simply invoke (as root)
-
-  # dd if=output/images/sdcard.img of=/dev/sdX && sync
-
-Where X is your SD card device
-
-Serial console
--------------
-
-Baudrate for this board is 1500000
--- a/board/friendlyarm/nanopi-r1/boot.cmd
+++ b/board/friendlyarm/nanopi-r1/boot.cmd
@@ -1,8 +0,0 @@
-setenv fdt_high ffffffff
-
-setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
-
-fatload mmc 0 $kernel_addr_r zImage
-fatload mmc 0 $fdt_addr_r sun8i-h3-nanopi-r1.dtb
-
-bootz $kernel_addr_r - $fdt_addr_r
--- a/board/friendlyarm/nanopi-r1/genimage.cfg
+++ b/board/friendlyarm/nanopi-r1/genimage.cfg
@@ -1,36 +0,0 @@
-# Minimal SD card image for the NanoPi M1
-#
-image boot.vfat {
-	vfat {
-		files = {
-			"zImage",
-			"sun8i-h3-nanopi-r1.dtb",
-			"boot.scr"
-		}
-	}
-	size = 10M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition u-boot {
-		in-partition-table = "no"
-		image = "u-boot-sunxi-with-spl.bin"
-		offset = 8192
-		size = 1040384 # 1MB - 8192
-	}
-
-	partition boot {
-		partition-type = 0xC
-		bootable = "true"
-		image = "boot.vfat"
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-		size = 512M
-	}
-}
--- a/board/friendlyarm/nanopi-r1/kernel/linux-extras.config
+++ b/board/friendlyarm/nanopi-r1/kernel/linux-extras.config
@@ -1,2 +0,0 @@
-# USB ethernet
-CONFIG_USB_RTL8152=y
--- a/board/friendlyarm/nanopi-r1/kernel/sun8i-h3-nanopi-r1.dts
+++ b/board/friendlyarm/nanopi-r1/kernel/sun8i-h3-nanopi-r1.dts
@@ -1,170 +0,0 @@
-/*
- * Copyright (C) 2019 Igor Pecovnik <igor@armbian.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include "sun8i-h3-nanopi.dtsi"
-
-/ {
-	model = "FriendlyElec NanoPi-R1";
-	compatible = "friendlyarm,nanopi-r1", "allwinner,sun8i-h3";
-
-	aliases {
-		serial1 = &uart3;
-		ethernet0 = &emac;
-		ethernet1 = &emac;
-		ethernet2 = &sdio_wifi;
-	};
-
-	wifi_pwrseq: wifi_pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		pinctrl-names = "default";
-		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
-	};
-
-	reg_gmac_3v3: gmac-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "gmac-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <100000>;
-		enable-active-high;
-		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
-	};
-
-	leds {
-		/delete-node/ status;
-		/delete-node/ pwr;
-		led1 {
-			label = "LED1";
-			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		led2 {
-			label = "LED2";
-			gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "netdev";
-		};
-
-		led3 {
-			label = "LED3";
-			gpios = <&pio 0 9 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "netdev";
-		};
-	};
-
-	r_gpio_keys {
-		compatible = "gpio-keys";
-		input-name = "k1";
-		pinctrl-names = "default";
-		pinctrl-0 = <&sw_r_npi>;
-
-		/delete-node/ k1;
-		reset {
-			label = "reset";
-			linux,code = <BTN_1>;
-			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_rgmii_pins>;
-	phy-supply = <&reg_gmac_3v3>;
-	phy-handle = <&ext_rgmii_phy>;
-	phy-mode = "rgmii";
-
-	status = "okay";
-};
-
-&external_mdio {
-	ext_rgmii_phy: ethernet-phy@1 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <7>;
-	};
-};
-
-&mmc1 {
-	vmmc-supply = <&reg_vcc3v3>;
-	vqmmc-supply = <&reg_vcc3v3>;
-	mmc-pwrseq = <&wifi_pwrseq>;
-	bus-width = <4>;
-	non-removable;
-	status = "okay";
-
-	sdio_wifi: sdio_wifi@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-		interrupt-parent = <&pio>;
-		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
-		interrupt-names = "host-wake";
-	};
-};
-
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_8bit_pins>;
-	vmmc-supply = <&reg_vcc3v3>;
-	vqmmc-supply = <&reg_vcc3v3>;
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
-};
-
-&ohci0 {
-	status = "okay";
-};
-
-&ohci1 {
-	status = "okay";
-};
-
-&usb_otg {
-	dr_mode = "peripheral";
-	status = "okay";
-};
-
-&usbphy {
-	status = "okay";
-};
--- a/board/friendlyarm/nanopi-r1/readme.txt
+++ b/board/friendlyarm/nanopi-r1/readme.txt
@@ -1,29 +0,0 @@
-NanoPi R1
-
-Intro
-=====
-
-This default configuration will allow you to start experimenting with the
-buildroot environment for the NanoPi R1. With the current configuration
-it will bring-up the board, and allow access through the serial console.
-
-How to build it
-===============
-
-Configure Buildroot:
-
-    $ make nanopi_r1_defconfig
-
-Compile everything and build the SD card image:
-
-    $ make
-
-How to write the SD card
-========================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
-  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
--- a/board/friendlyarm/nanopi-r1/uboot/nanopi_r1_defconfig
+++ b/board/friendlyarm/nanopi-r1/uboot/nanopi_r1_defconfig
@@ -1,22 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_SUNXI=y
-CONFIG_SPL=y
-CONFIG_MACH_SUN8I_H3=y
-CONFIG_DRAM_CLK=408
-CONFIG_DRAM_ZQ=3881979
-CONFIG_DRAM_ODT_EN=y
-CONFIG_MACPWR="PD6"
-# CONFIG_VIDEO_DE2 is not set
-CONFIG_NR_DRAM_BANKS=1
-# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_CONSOLE_MUX=y
-CONFIG_SYS_CLK_FREQ=480000000
-# CONFIG_CMD_FLASH is not set
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
-CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-nanopi-r1"
-CONFIG_SUN8I_EMAC=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
-CONFIG_MMC_SUNXI_SLOT_EXTRA=2
--- a/board/friendlyarm/nanopi-r1/uboot/sun8i-h3-nanopi-r1.dts
+++ b/board/friendlyarm/nanopi-r1/uboot/sun8i-h3-nanopi-r1.dts
@@ -1,102 +0,0 @@
-/*
- * Copyright (C) 2019 Igor Pecovnik <igor@armbian.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include "sun8i-h3-nanopi.dtsi"
-
-/ {
-	model = "FriendlyARM NanoPi R1";
-	compatible = "friendlyarm,nanopi-neo", "allwinner,sun8i-h3";
-
-	reg_gmac_3v3: gmac-3v3 {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		regulator-name = "gmac-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <100000>;
-		enable-active-high;
-		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
-	};
-
-};
-
-&ehci0 {
-	status = "okay";
-};
-
-&pio {
-	gmac_power_pin_nanopi: gmac_power_pin@0 {
-		pins = "PD6";
-		function = "gpio_out";
-	};
-};
-
-&ohci0 {
-	status = "okay";
-};
-
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_8bit_pins>;
-	vmmc-supply = <&reg_vcc3v3>;
-	bus-width = <8>;
-	non-removable;
-	cap-mmc-hw-reset;
-	status = "okay";
-};
-
-&emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_rgmii_pins>;
-	phy-supply = <&reg_gmac_3v3>;
-	phy-handle = <&ext_rgmii_phy>;
-	phy-mode = "rgmii";
-
-	status = "okay";
-};
-
-&external_mdio {
-	ext_rgmii_phy: ethernet-phy@1 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <7>;
-	};
-};
--- a/board/grinn/chiliboard/post-image.sh
+++ b/board/grinn/chiliboard/post-image.sh
@@ -0,0 +1,14 @@
+#!/usr/bin/env bash
+
+BOARD_DIR="$(dirname $0)"
+GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
+GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
+
+rm -rf "${GENIMAGE_TMP}"
+
+genimage \
+    --rootpath "${TARGET_DIR}" \
+    --tmppath "${GENIMAGE_TMP}" \
+    --inputpath "${BINARIES_DIR}" \
+    --outputpath "${BINARIES_DIR}" \
+    --config "${GENIMAGE_CFG}"
--- a/board/grinn/liteboard/post-image.sh
+++ b/board/grinn/liteboard/post-image.sh
@@ -0,0 +1,14 @@
+#!/usr/bin/env bash
+
+BOARD_DIR="$(dirname $0)"
+GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
+GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
+
+rm -rf "${GENIMAGE_TMP}"
+
+genimage \
+    --rootpath "${TARGET_DIR}" \
+    --tmppath "${GENIMAGE_TMP}" \
+    --inputpath "${BINARIES_DIR}" \
+    --outputpath "${BINARIES_DIR}" \
+    --config "${GENIMAGE_CFG}"
--- a/board/hardkernel/odroidc2/boot.ini
+++ b/board/hardkernel/odroidc2/boot.ini
@@ -0,0 +1,176 @@
+ODROIDC2-UBOOT-CONFIG
+
+########################################################################
+# Changes made to this are overwritten every time there's a new upgrade
+# To make your changes permanent change it on 
+# boot.ini.default
+# After changing it on boot.ini.default run the bootini command to
+# rewrite this file with your personal permanent settings.
+# Documentation: http://odroid.com/dokuwiki/doku.php?id=en:c2_persistent_bootini
+########################################################################
+
+# Possible screen resolutions
+# Uncomment only a single Line! The line with setenv written.
+# At least one mode must be selected.
+
+# Custom modeline!
+# To use custom modeline you need to disable all the below resolutions
+# and setup your own! 
+# For more information check our wiki: 
+# http://odroid.com/dokuwiki/doku.php?id=en:c2_hdmi_autosetting
+# Example below:
+# setenv m "custombuilt" 
+# setenv modeline "1920,1200,154000,74040,60,1920,1968,2000,2080,1200,1202,1208,1235,1,0,1"
+
+# 480 Lines (720x480)
+# setenv m "480i60hz" # Interlaced 60Hz
+# setenv m "480i_rpt" # Interlaced for Rear Projection Televisions 60Hz
+# setenv m "480p60hz" # 480 Progressive 60Hz
+# setenv m "480p_rpt" # 480 Progressive for Rear Projection Televisions 60Hz
+
+# 576 Lines (720x576)
+# setenv m "576i50hz" # Interlaced 50Hz
+# setenv m "576i_rpt" # Interlaced for Rear Projection Televisions 50Hz
+# setenv m "576p50hz" # Progressive 50Hz
+# setenv m "576p_rpt" # Progressive for Rear Projection Televisions 50Hz
+
+# 720 Lines (1280x720)
+# setenv m "720p50hz" # 50Hz
+# setenv m "720p60hz" # 60Hz
+
+# 1080 Lines (1920x1080)
+# setenv m "1080i60hz" # Interlaced 60Hz
+setenv m "1080p60hz" # Progressive 60Hz
+# setenv m "1080i50hz" # Interlaced 50Hz
+# setenv m "1080p50hz" # Progressive 50Hz
+# setenv m "1080p24hz" # Progressive 24Hz
+
+# 4K (3840x2160)
+# setenv m "2160p30hz"    # Progressive 30Hz
+# setenv m "2160p25hz"    # Progressive 25Hz
+# setenv m "2160p24hz"    # Progressive 24Hz
+# setenv m "smpte24hz"    # Progressive 24Hz SMPTE
+# setenv m "2160p50hz"    # Progressive 50Hz
+# setenv m "2160p60hz"    # Progressive 60Hz
+# setenv m "2160p50hz420" # Progressive 50Hz with YCbCr 4:2:0 (Requires TV/Monitor that supports it)
+# setenv m "2160p60hz420" # Progressive 60Hz with YCbCr 4:2:0 (Requires TV/Monitor that supports it)
+
+### VESA modes ###
+# setenv m "640x480p60hz"
+# setenv m "800x480p60hz"
+# setenv m "480x800p60hz"
+# setenv m "800x600p60hz"
+# setenv m "1024x600p60hz"
+# setenv m "1024x768p60hz"  
+# setenv m "1280x800p60hz"
+# setenv m "1280x1024p60hz"
+# setenv m "1360x768p60hz"
+# setenv m "1440x900p60hz"
+# setenv m "1600x900p60hz"
+# setenv m "1680x1050p60hz"
+# setenv m "1600x1200p60hz"
+# setenv m "1920x1200p60hz"
+# setenv m "2560x1080p60hz"
+# setenv m "2560x1440p60hz"
+# setenv m "2560x1600p60hz"
+# setenv m "3440x1440p60hz"
+
+# HDMI BPP Mode
+setenv m_bpp "32"
+# setenv m_bpp "24"
+# setenv m_bpp "16"
+
+# HDMI DVI/VGA modes
+# By default its set to HDMI, if needed change below.
+# Uncomment only a single Line.
+# setenv vout "dvi"
+# setenv vout "vga"
+
+# HDMI HotPlug Detection control
+# Allows you to force HDMI thinking that the cable is connected.
+# true = HDMI will believe that cable is always connected
+# false = will let board/monitor negotiate the connection status
+setenv hpd "true"
+# setenv hpd "false"
+
+# Monitor output
+# Controls if HDMI PHY should output anything to the monitor
+setenv monitor_onoff "false" # true or false
+
+# Server Mode (aka. No Graphics)
+# Setting nographics to 1 will disable all video subsystem
+# This mode is ideal of server type usage. (Saves ~300Mb of RAM)
+setenv nographics "0"
+
+# Meson Timer
+# 1 - Meson Timer
+# 0 - Arch Timer 
+# Using meson_timer improves the video playback however it breaks KVM (virtualization).
+# Using arch timer allows KVM/Virtualization to work however you'll experience poor video
+setenv mesontimer "1"
+
+# UHS (Ultra High Speed) MicroSD mode enable/disable
+setenv disableuhs "false"
+
+# MicroSD Card Detection enable/disable
+# Force the MMC controlled to believe that a card is connected.
+setenv mmc_removable "true"
+
+# USB Multi WebCam tweak
+# Only enable this if you use it.
+setenv usbmulticam "false"
+
+# Default Console Device Setting
+setenv condev "console=ttyS0,115200n8 console=tty0"   # on both
+
+# CPU Frequency / Cores control
+###########################################
+### WARNING!!! WARNING!!! WARNING!!!
+# Before changing anything here please read the wiki entry: 
+# http://odroid.com/dokuwiki/doku.php?id=en:c2_set_cpu_freq
+#
+# MAX CPU's
+# setenv maxcpus "1"
+# setenv maxcpus "2"
+# setenv maxcpus "3"
+setenv maxcpus "4"
+
+# MAX Frequency
+# setenv max_freq "2016"  # 2.016GHz
+# setenv max_freq "1944"  # 1.944GHz
+# setenv max_freq "1944"  # 1.944GHz
+# setenv max_freq "1920"  # 1.920GHz
+# setenv max_freq "1896"  # 1.896GHz
+# setenv max_freq "1752"  # 1.752GHz
+# setenv max_freq "1680"  # 1.680GHz
+# setenv max_freq "1656"  # 1.656GHz
+setenv max_freq "1536"  # 1.536GHz
+
+
+
+###########################################
+
+# Boot Arguments
+if test "${m}" = "custombuilt"; then setenv cmode "modeline=${modeline}"; fi
+
+setenv bootargs "root=/dev/mmcblk0p2 rootwait ro ${condev} no_console_suspend hdmimode=${m} ${cmode} m_bpp=${m_bpp} vout=${vout} fsck.repair=yes net.ifnames=0 elevator=noop disablehpd=${hpd} max_freq=${max_freq} maxcpus=${maxcpus} monitor_onoff=${monitor_onoff} disableuhs=${disableuhs} mmc_removable=${mmc_removable} usbmulticam=${usbmulticam}"
+
+# Booting
+
+setenv loadaddr "0x11000000"
+setenv dtb_loadaddr "0x1000000"
+setenv initrd_loadaddr "0x13000000"
+
+fatload mmc 0:1 ${loadaddr} Image
+fatload mmc 0:1 ${dtb_loadaddr} meson64_odroidc2.dtb
+fdt addr ${dtb_loadaddr}
+
+if test "${mesontimer}" = "0"; then fdt rm /meson_timer; fdt rm /cpus/cpu@0/timer; fdt rm /cpus/cpu@1/timer; fdt rm /cpus/cpu@2/timer; fdt rm /cpus/cpu@3/timer; fi
+if test "${mesontimer}" = "1"; then fdt rm /timer; fi
+
+if test "${nographics}" = "1"; then fdt rm /reserved-memory; fdt rm /aocec; fi
+if test "${nographics}" = "1"; then fdt rm /meson-fb; fdt rm /amhdmitx; fdt rm /picdec; fdt rm /ppmgr; fi
+if test "${nographics}" = "1"; then fdt rm /meson-vout; fdt rm /mesonstream; fdt rm /meson-fb; fi
+if test "${nographics}" = "1"; then fdt rm /deinterlace; fdt rm /codec_mm; fi
+
+booti ${loadaddr} - ${dtb_loadaddr}
--- a/board/hardkernel/odroidc2/genimage.cfg
+++ b/board/hardkernel/odroidc2/genimage.cfg
@@ -0,0 +1,27 @@
+image boot.vfat {
+	vfat {
+		files = {
+			"boot.ini",
+			"Image",
+			"meson64_odroidc2.dtb"
+		}
+	}
+	size = 32M
+}
+
+image sdcard.img {
+	hdimage {
+	}
+
+	partition vfat {
+		partition-type = 0xC
+		image = "boot.vfat"
+		offset = 1048576
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext4"
+		size = 512M
+	}
+}
--- a/board/hardkernel/odroidc2/post-image.sh
+++ b/board/hardkernel/odroidc2/post-image.sh
@@ -0,0 +1,19 @@
+#!/bin/sh
+
+BOARD_DIR="$(dirname $0)"
+GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
+GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
+
+cp ${BOARD_DIR}/boot.ini ${BINARIES_DIR}/
+
+rm -rf "${GENIMAGE_TMP}"
+
+genimage                           \
+	--rootpath "${TARGET_DIR}"     \
+	--tmppath "${GENIMAGE_TMP}"    \
+	--inputpath "${BINARIES_DIR}"  \
+	--outputpath "${BINARIES_DIR}" \
+	--config "${GENIMAGE_CFG}"
+
+dd if=${BINARIES_DIR}/u-boot.bin of=${BINARIES_DIR}/sdcard.img bs=1 count=442 conv=sync,notrunc
+dd if=${BINARIES_DIR}/u-boot.bin of=${BINARIES_DIR}/sdcard.img bs=512 skip=1 seek=1 conv=fsync,notrunc
--- a/board/hardkernel/odroidc2/readme.txt
+++ b/board/hardkernel/odroidc2/readme.txt
@@ -0,0 +1,53 @@
+ODROID-C2
+
+Intro
+=====
+To be able to use ODROID-C2 board with the images generated by
+Buildroot, you have to prepare the SDCard or eMMC.
+
+How to build it
+===============
+
+  $ make odroidc2_defconfig
+
+Then you can edit the build options using
+
+  $ make menuconfig
+
+Compile all and build rootfs image:
+
+  $ make
+
+Note: you will need to have access to the network, since Buildroot will
+download the packages' sources.
+
+Result of the build
+-------------------
+
+After building, you should obtain this tree:
+
+    output/images/
+    +-- Image
+    +-- boot.ini                   [1]
+    +-- boot.vfat
+    +-- meson64_odroidc2.dtb
+    +-- rootfs.ext2
+    +-- rootfs.ext4
+    +-- rootfs.tar
+    +-- sdcard.img
+    `-- u-boot.bin
+
+[1] This is the ODROID-C2 configuration file used in u-boot.
+
+How to write the SD card or eMMC
+================================
+
+Once the build process is finished you will have an image called "sdcard.img"
+in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an SD card or eMMC with "dd":
+
+  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
+
+Insert the SDcard into your ODROID-C2, and power it up. Your new system
+should come up now.
--- a/board/lemaker/bananapro/patches/linux/0001-arch-arm-boot-dts-sun7i-a20-bananapro.dts-disable-00.patch
+++ b/board/lemaker/bananapro/patches/linux/0001-arch-arm-boot-dts-sun7i-a20-bananapro.dts-disable-00.patch
@@ -1,44 +0,0 @@
-From 896e82ab14e7e4e361ffa7c81def787907c1bf4c Mon Sep 17 00:00:00 2001
-From: Bartosz Bilas <b.bilas@grinn-global.com>
-Date: Sun, 19 May 2019 21:04:35 +0200
-Subject: [PATCH] arch/arm/boot/dts/sun7i-a20-bananapro.dts: disable 00B
- IRQ for brcm wifi module
-
-	BugLink: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=908438
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
---
- arch/arm/boot/dts/sun7i-a20-bananapro.dts | 16 +++++++++++++---
- 1 file changed, 13 insertions(+), 3 deletions(-)
-
-diff --git a/arch/arm/boot/dts/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/sun7i-a20-bananapro.dts
-index 0176e9de0..93b3340f5 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapro.dts
-+++ b/arch/arm/boot/dts/sun7i-a20-bananapro.dts
-@@ -160,9 +160,19 @@
- 	brcmf: wifi@1 {
- 		reg = <1>;
- 		compatible = "brcm,bcm4329-fmac";
-		interrupt-parent = <&pio>;
-		interrupts = <7 15 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-names = "host-wake";
-+		/*
-+		 * OOB interrupt support is broken ATM, often the first irq
-+		 * does not get seen resulting in the drv probe failing with:
-+		 *
-+		 * brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
-+		 * brcmfmac: brcmf_bus_started: failed: -110
-+		 * brcmfmac: brcmf_attach: dongle is not responding: err=-110
-+		 * brcmfmac: brcmf_sdio_firmware_callback: brcmf_attach failed
-+		 *
-+		 * interrupt-parent = <&pio>;
-+		 * interrupts = <7 15 IRQ_TYPE_LEVEL_LOW>;
-+		 * interrupt-names = "host-wake";
-+		 */
- 	};
- };
- 
-- 
-2.21.0
-
--- a/board/olpc/genimage.cfg
+++ b/board/olpc/genimage.cfg
@@ -1,9 +0,0 @@
-image sdcard.img {
-	hdimage {
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-	}
-}
--- a/board/olpc/linux.config
+++ b/board/olpc/linux.config
@@ -1,66 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_CFG80211=y
-CONFIG_CFG80211_WEXT=y
-CONFIG_MAC80211=y
-CONFIG_RFKILL=y
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_NETDEVICES=y
-CONFIG_LIBERTAS=m
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1200
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=900
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_TABLET=y
-CONFIG_SERIO_OLPC_APSP=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_BATTERY_OLPC=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_MEDIA_CAMERA_SUPPORT=y
-CONFIG_MEDIA_CONTROLLER=y
-CONFIG_VIDEO_V4L2_SUBDEV_API=y
-CONFIG_MEDIA_USB_SUPPORT=y
-CONFIG_USB_VIDEO_CLASS=m
-CONFIG_V4L_PLATFORM_DRIVERS=y
-CONFIG_DRM=y
-CONFIG_DRM_PANEL_SIMPLE=m
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FB_SIMPLE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_PCI=y
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-CONFIG_EXT4_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_FONTS=y
-CONFIG_FONT_TER16x32=y
--- a/board/olpc/olpc.fth
+++ b/board/olpc/olpc.fth
@@ -1,46 +0,0 @@
-\ OLPC XO boot script
-
-: (visible)  " unfreeze visible" evaluate  ;
-' (visible) catch  drop  forget (visible)
-
-" /aliases" find-device " last" get-property
-abort" No last alias"
-" /pci/sd@c"          2over substring?  if  " root=/dev/mmcblk0p1 " to boot-file  then
-" /sd/sdhci@d4280000" 2over substring?  if  " root=/dev/mmcblk1p1 " to boot-file  then
-" /pci/usb@"          2over substring?  if  " root=/dev/sda1 "      to boot-file  then
-" /usb@"              2over substring?  if  " root=/dev/sda1 "      to boot-file  then
-2drop
-
-root-device " compatible" get-property dend  if  0 0  then  ( compatible$ )
-" olpc,xo-1.75" 2over sindex -1 > if  ( compatible$ )
-   \ Version check on XO-1.75
-   " mrvl,mmp2" 2over sindex -1 =  if ( compatible$ )
-      2drop                           ( )
-      cr
-      ." Firmware Q4E00 or newer is needed to boot a Devicetree enabled kernel." cr
-      cr
-      ." One way to update is to copy http://dev.laptop.org/~quozl/q4e00ja.rom" cr
-      ." to a FAT partition on a USB flash stick and run ""flash u:\q4e00ja.rom""" cr
-      cr
-      ." Aborting boot." cr
-      " show-sad" evaluate
-      abort
-   then
-then ( compatible$ )
-
-" mmp" 2swap sindex -1 > if
-   \ A Marvell MMP-based machine
-   " last:\boot\zImage" to boot-device
-   boot-file " console=ttyS2,115200 " $cat2 to boot-file
-else
-    \ Assume XO-1
-   " last:\boot\bzImage" to boot-device
-   boot-file " console=ttyS0,115200 reboot=pci " $cat2 to boot-file
-then
-
-\ Pick a terminal that looks better on the XO screen
-root-device " architecture" get-property dend  if  0 0  else  1-  then
-" OLPC" $=  if  boot-file " fbcon=font:TER16x32 vt.color=0xf0 " $cat2 to boot-file  then
-
-boot-file " console=tty0 rootwait" $cat2 to boot-file
-boot
--- a/board/olpc/post-build.sh
+++ b/board/olpc/post-build.sh
@@ -1,4 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname $0)"
-install -m 0644 -D $BOARD_DIR/olpc.fth $TARGET_DIR/boot/olpc.fth
--- a/board/olpc/readme.txt
+++ b/board/olpc/readme.txt
@@ -1,78 +0,0 @@
-OLPC XO Laptops
-===============
-
-This document explains how to build and run images that run on the OLPC
-XO laptops.
-
-Supported models
----------------
-
-* OLPC XO-1
-  The original NS Geode based OLPC laptop, uses the x86 architecture.
-
-* OLPC XO-7.5
-  The ARM-based laptop. Needs a recent enough firmware to provide a good
-  enough flattened device tree to the kernel.
-
-Configure and build
-===================
-
-  $ make olpc_xo1_defconfig   # Configure for XO-1
-
-or:
-
-  $ make olpc_xo175_defconfig # Configure for XO-1.75
-
-Then:
-
-  $ make menuconfig           # Customize the build configuration
-  $ make                      # Build
-
-Create the bootable media
-=========================
-
-When the build is finished, the resulting image file will be called
-"sdcard.img". It can be written directly to a SD-card or and USB flash stick.
-
-Please double check that you're using the right device (e.g. with "lsblk"
-command). Doing the following will DESTROY ALL DATA that's currently on the
-media.
-
-  # cat output/images/sdcard.img >/dev/<device>
-
-Preparing the machine
-=====================
-
-Firmware security
-----------------
-
-Most OLPC machines were shipped with the security system that disallows
-booting unsigned software. If this is the case with your machine, in order
-to run the image you've built on it you'll need to get a developer key and
-deactivate the security system.
-
-The procedure is descriped in the OLPC wiki:
-http://wiki.laptop.org/go/Activation_and_Developer_Keys
-
-Firmware upgrade
----------------
-
-It is always preferrable to use an up to date firmware. The firmware images
-are available at http://wiki.laptop.org/go/Firmware. For the XO-1.75 laptop
-to boot the mainline kernel a firmware Q4E00JA or newer is needed. You can
-get it at http://dev.laptop.org/~quozl/q4e00ja.rom.
-
-To update the firmware, place the .rom file on to your bootable media,
-connect a charged battery pack and a wall adapter, and enter the Open
-Firmware prompt by pressing ESC during the early boot (needs an unlocked
-laptop -- see "Firmware security" above). Then use the "flash" command
-to update the firmware:
-
-  ok flash ext:\q4e00ja.rom   \ Flash the "q4e00ja.rom" from the SD card
-  ok flash u:\q4e00ja.rom     \ Flash the "q4e00ja.rom" from USB stick
-
-Booting the machine
-===================
-
-Once your machine is unlocked, it will automatically boot from your media
-wherever it will detect it attached to the USB bus or the SD card slot.
--- a/board/olpc/xo-1.75/linux.config
+++ b/board/olpc/xo-1.75/linux.config
@@ -1,47 +0,0 @@
-CONFIG_ARCH_MMP=y
-CONFIG_MACH_MMP2_DT=y
-CONFIG_MACH_MMP3_DT=y
-CONFIG_USB_EHCI_MV_U2O=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_HIGHMEM=y
-CONFIG_FORCE_MAX_ZONEORDER=16
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_REGULATOR_88PG86X=m
-CONFIG_VIDEO_MMP_CAMERA=y
-CONFIG_DRM_ARMADA=y
-CONFIG_DRM_DISPLAY_CONNECTOR=m
-CONFIG_DRM_SIMPLE_BRIDGE=m
-CONFIG_DRM_ETNAVIV=m
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_USB_EHCI_MV=y
-CONFIG_MMC_SDHCI_PXAV3=y
-CONFIG_OLPC_XO175=y
-CONFIG_OLPC_XO175_EC=y
-CONFIG_PHY_PXA_USB=y
-CONFIG_PHY_MMP3_USB=y
-CONFIG_CRYPTO_LZO=m
-CONFIG_LIBERTAS_SDIO=m
-CONFIG_LIBERTAS_THINFIRM=m
-CONFIG_MWIFIEX=m
-CONFIG_MWIFIEX_SDIO=m
-CONFIG_MTD_SPI_NOR=m
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_SPI_NOR=m
-CONFIG_I2C_PXA=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SPI=y
-CONFIG_SPI_PXA2XX=y
-CONFIG_SPI_SLAVE=y
-CONFIG_SND_SOC=y
-CONFIG_SND_SOC_RT5631=y
-CONFIG_PWRSEQ_SD8787=m
-CONFIG_RTC_DRV_DS1307=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ZFORCE=y
--- a/board/olpc/xo-1/linux.config
+++ b/board/olpc/xo-1/linux.config
@@ -1,81 +0,0 @@
-# CONFIG_64BIT is not set
-CONFIG_IOSF_MBI=y
-CONFIG_MGEODE_LX=y
-CONFIG_X86_MSR=y
-CONFIG_HZ_100=y
-CONFIG_KEXEC=y
-CONFIG_PHYSICAL_START=0x400000
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_ACPI is not set
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_OLPC=y
-CONFIG_OLPC_XO1_PM=y
-CONFIG_OLPC_XO1_RTC=y
-CONFIG_OLPC_XO1_SCI=y
-# CONFIG_FIRMWARE_MEMMAP is not set
-# CONFIG_VIRTUALIZATION is not set
-CONFIG_ARCH_MMAP_RND_BITS=16
-CONFIG_REFCOUNT_FULL=y
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_CMA=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=0
-CONFIG_MTD_ONENAND_GENERIC=y
-CONFIG_MTD_NAND_CAFE=y
-CONFIG_MTD_UBI=y
-CONFIG_CS5535_MFGPT=y
-CONFIG_CS5535_CLOCK_EVENT_SRC=y
-CONFIG_SENSORS_LIS3_SPI=y
-CONFIG_MOUSE_PS2_OLPC=y
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_VIA is not set
-CONFIG_NVRAM=y
-CONFIG_SCx200_ACB=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_SINGLE=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_CS5535=y
-CONFIG_THERMAL=y
-CONFIG_WATCHDOG=y
-CONFIG_GEODE_WDT=y
-CONFIG_MFD_CS5535=y
-CONFIG_MFD_MAX8925=y
-CONFIG_VIDEO_CAFE_CCIC=y
-CONFIG_FB_TILEBLITTING=y
-CONFIG_FB_VESA=y
-CONFIG_FB_GEODE=y
-CONFIG_FB_GEODE_LX=y
-CONFIG_BACKLIGHT_MAX8925=y
-CONFIG_VGACON_SOFT_SCROLLBACK=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_DYNAMIC_MINORS=y
-CONFIG_SND_AC97_POWER_SAVE=y
-CONFIG_SND_CS5535AUDIO=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_FB_OLPC_DCON=y
-CONFIG_XO1_RFKILL=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_GENERIC_PHY=y
-CONFIG_PROC_KCORE=y
-CONFIG_HUGETLBFS=y
-CONFIG_JFFS2_FS_WBUF_VERIFY=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_UBIFS_FS=y
-CONFIG_PCI=y
-CONFIG_LIBERTAS_USB=m
-CONFIG_LIBERTAS_MESH=y
-CONFIG_LIBERTAS_THINFIRM=m
-CONFIG_LIBERTAS_THINFIRM_USB=m
--- a/board/pc/genimage-efi.cfg
+++ b/board/pc/genimage-efi.cfg
@@ -1,35 +0,0 @@
-image efi-part.vfat {
-  vfat {
-    file startup.nsh {
-      image = "efi-part/startup.nsh"
-    }
-    file EFI {
-      image = "efi-part/EFI"
-    }
-    file bzImage {
-      image = "bzImage"
-    }
-  }
-  size = 16777216
-}
-
-image disk.img {
-  hdimage {
-    gpt = true
-  }
-
-  partition boot {
-    image = "efi-part.vfat"
-    partition-type-uuid = c12a7328-f81f-11d2-ba4b-00a0c93ec93b
-    offset = 32768
-    size = 16777216
-    bootable = true
-  }
-
-  partition root {
-    partition-type-uuid = 44479540-f297-41b2-9af7-d131d5f0458a
-    partition-uuid = UUID_TMP
-    image = "rootfs.ext2"
-    offset = 16809984
-  }
-}
--- a/board/pc/grub-efi.cfg
+++ b/board/pc/grub-efi.cfg
@@ -1,6 +0,0 @@
-set default="0"
-set timeout="5"
-
-menuentry "Buildroot" {
- linux /bzImage root=PARTUUID=UUID_TMP rootwait console=tty1
-}
--- a/board/pc/post-build.sh
+++ b/board/pc/post-build.sh
@@ -4,12 +4,7 @@ set -e

 BOARD_DIR=$(dirname "$0")

-# Detect boot strategy, EFI or BIOS
-if [ -f "$BINARIES_DIR/efi-part/startup.nsh" ]; then
-    cp -f "$BOARD_DIR/grub-efi.cfg" "$BINARIES_DIR/efi-part/EFI/BOOT/grub.cfg"
-else
-    cp -f "$BOARD_DIR/grub-bios.cfg" "$TARGET_DIR/boot/grub/grub.cfg"
+cp -f "$BOARD_DIR/grub-bios.cfg" "$TARGET_DIR/boot/grub/grub.cfg"

-    # Copy grub 1st stage to binaries, required for genimage
-    cp -f "$HOST_DIR/lib/grub/i386-pc/boot.img" "$BINARIES_DIR"
-fi
+# Copy grub 1st stage to binaries, required for genimage
+cp -f "$HOST_DIR/lib/grub/i386-pc/boot.img" "$BINARIES_DIR"
--- a/board/pc/post-image-efi-gpt.sh
+++ b/board/pc/post-image-efi-gpt.sh
@@ -0,0 +1,62 @@
+#!/bin/sh
+
+set -e
+
+cd ${BINARIES_DIR}
+
+# GPT partition type UUIDs
+esp_type=c12a7328-f81f-11d2-ba4b-00a0c93ec93b
+linux_type=44479540-f297-41b2-9af7-d131d5f0458a
+
+# Partition UUIDs
+efi_part_uuid=$(uuidgen)
+root_part_uuid=$(uuidgen)
+
+# Boot partition offset and size, in 512-byte sectors
+efi_part_start=64
+efi_part_size=32768
+
+# Rootfs partition offset and size, in 512-byte sectors
+root_part_start=$(( efi_part_start + efi_part_size ))
+root_part_size=$(( $(stat -c %s rootfs.ext2) / 512 ))
+
+first_lba=34
+last_lba=$(( root_part_start + root_part_size ))
+
+# Disk image size in 512-byte sectors
+image_size=$(( last_lba + first_lba ))
+
+cat > efi-part/EFI/BOOT/grub.cfg <<EOF
+set default="0"
+set timeout="5"
+
+menuentry "Buildroot" {
+	linux /bzImage root=PARTUUID=$root_part_uuid rootwait console=tty1
+}
+EOF
+
+# Create EFI system partition
+rm -f efi-part.vfat
+dd if=/dev/zero of=efi-part.vfat bs=512 count=0 seek=$efi_part_size
+mkdosfs  efi-part.vfat
+mcopy -bsp -i efi-part.vfat efi-part/startup.nsh ::startup.nsh
+mcopy -bsp -i efi-part.vfat efi-part/EFI ::EFI
+mcopy -bsp -i efi-part.vfat bzImage ::bzImage
+
+rm -f disk.img
+dd if=/dev/zero of=disk.img bs=512 count=0 seek=$image_size
+
+sfdisk disk.img <<EOF
+label: gpt
+label-id: $(uuidgen)
+device: /dev/foobar0
+unit: sectors
+first-lba: $first_lba
+last-lba: $last_lba
+
+/dev/foobar0p1 : start=$efi_part_start,  size=$efi_part_size,  type=$esp_type,   uuid=$efi_part_uuid,  name="efi-part.vfat"
+/dev/foobar0p2 : start=$root_part_start, size=$root_part_size, type=$linux_type, uuid=$root_part_uuid, name="rootfs.ext2"
+EOF
+
+dd if=efi-part.vfat of=disk.img bs=512 count=$efi_part_size seek=$efi_part_start conv=notrunc
+dd if=rootfs.ext2   of=disk.img bs=512 count=$root_part_size seek=$root_part_start conv=notrunc
--- a/board/pc/post-image-efi.sh
+++ b/board/pc/post-image-efi.sh
@@ -1,8 +0,0 @@
-#!/bin/sh
-
-set -e
-
-UUID=$(dumpe2fs "$BINARIES_DIR/rootfs.ext2" 2>/dev/null | sed -n 's/^Filesystem UUID: *\(.*\)/\1/p')
-sed -i "s/UUID_TMP/$UUID/g" "$BINARIES_DIR/efi-part/EFI/BOOT/grub.cfg"
-sed "s/UUID_TMP/$UUID/g" board/pc/genimage-efi.cfg > "$BINARIES_DIR/genimage-efi.cfg"
-support/scripts/genimage.sh -c "$BINARIES_DIR/genimage-efi.cfg"
--- a/board/qemu/aarch64-virt/readme.txt
+++ b/board/qemu/aarch64-virt/readme.txt
@@ -1,5 +1,7 @@
 Run the emulation with:

-  qemu-system-aarch64 -M virt -cpu cortex-a53 -nographic -smp 1 -kernel output/images/Image -append "rootwait root=/dev/vda console=ttyAMA0" -netdev user,id=eth0 -device virtio-net-device,netdev=eth0 -drive file=output/images/rootfs.ext4,if=none,format=raw,id=hd0 -device virtio-blk-device,drive=hd0 # qemu_aarch64_virt_defconfig
+  qemu-system-aarch64 -M virt -cpu cortex-a53 -nographic -smp 1 -kernel output/images/Image -append "rootwait root=/dev/vda console=ttyAMA0" -netdev user,id=eth0 -device virtio-net-device,netdev=eth0 -drive file=output/images/rootfs.ext4,if=none,format=raw,id=hd0 -device virtio-blk-device,drive=hd0

 The login prompt will appear in the terminal that started Qemu.
+
+Tested with QEMU 2.12.0
--- a/board/qemu/arm-versatile/readme.txt
+++ b/board/qemu/arm-versatile/readme.txt
@@ -1,10 +1,12 @@
 Run the emulation with:

-  qemu-system-arm -M versatilepb -kernel output/images/zImage -dtb output/images/versatile-pb.dtb -drive file=output/images/rootfs.ext2,if=scsi,format=raw -append "rootwait root=/dev/sda console=ttyAMA0,115200" -serial stdio -net nic,model=rtl8139 -net user # qemu_arm_versatile_defconfig
+  qemu-system-arm -M versatilepb -kernel output/images/zImage -dtb output/images/versatile-pb.dtb -drive file=output/images/rootfs.ext2,if=scsi,format=raw -append "rootwait root=/dev/sda console=ttyAMA0,115200" -serial stdio -net nic,model=rtl8139 -net user

 Or for the noMMU emulation:

-  qemu-system-arm -M versatilepb -kernel output/images/zImage -dtb output/images/versatile-pb.dtb -append "console=ttyAMA0,115200" -serial stdio -net user -net nic,model=smc91c111 # qemu_arm_versatile_nommu_defconfig
+  qemu-system-arm -M versatilepb -kernel output/images/zImage -dtb output/images/versatile-pb.dtb -append "console=ttyAMA0,115200" -serial stdio -net user -net nic,model=smc91c111

 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.
+
+Tested with QEMU 2.12.0
--- a/board/qemu/arm-vexpress-tz/readme.txt
+++ b/board/qemu/arm-vexpress-tz/readme.txt
@@ -29,6 +29,8 @@ number of cores.
 Note: "-netdev user,id=vmnic -device virtio-net-device,netdev=vmnic"
 brings network support that is used i.e. in OP-TEE regression tests.

+Tested with QEMU 2.12.0, and 3.1.0.
+

 -- Boot Details --

--- a/board/qemu/arm-vexpress/readme.txt
+++ b/board/qemu/arm-vexpress/readme.txt
@@ -1,9 +1,11 @@
 Run the emulation with:

-  qemu-system-arm -M vexpress-a9 -smp 1 -m 256 -kernel output/images/zImage -dtb output/images/vexpress-v2p-ca9.dtb -drive file=output/images/rootfs.ext2,if=sd,format=raw -append "console=ttyAMA0,115200 rootwait root=/dev/mmcblk0" -serial stdio -net nic,model=lan9118 -net user # qemu_arm_vexpress_defconfig
+  qemu-system-arm -M vexpress-a9 -smp 1 -m 256 -kernel output/images/zImage -dtb output/images/vexpress-v2p-ca9.dtb -drive file=output/images/rootfs.ext2,if=sd,format=raw -append "console=ttyAMA0,115200 rootwait root=/dev/mmcblk0" -serial stdio -net nic,model=lan9118 -net user

 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.

 If you want to emulate more cores change "-smp 1" to "-smp 2" for
 dual-core or even "smp -4" for a quad-core configuration.
+
+Tested with QEMU 2.12.0
--- a/board/qemu/csky/readme.txt
+++ b/board/qemu/csky/readme.txt
@@ -1,15 +1,12 @@
 Run with qemu:

 For ck860 smp:
- qemu-system-cskyv2 -M virt -cpu ck860 -smp 2 -nographic -kernel vmlinux # qemu_csky860_virt_defconfig
+ qemu-system-cskyv2 -M virt -cpu ck860 -smp 2 -nographic -kernel vmlinux

-For ck807:
- qemu-system-cskyv2 -M virt -nographic -kernel vmlinux # qemu_csky807_virt_defconfig
-
-For ck810:
- qemu-system-cskyv2 -M virt -nographic -kernel vmlinux # qemu_csky810_virt_defconfig
+For ck810/ck807:
+ qemu-system-cskyv2 -M virt -nographic -kernel vmlinux

 For ck610:
- qemu-system-cskyv1 -M virt -nographic -kernel vmlinux # qemu_csky610_virt_defconfig
+ qemu-system-cskyv1 -M virt -nographic -kernel vmlinux

 The login prompt will appear in the terminal that started Qemu. Username is root and no password.
--- a/board/qemu/m68k-mcf5208/readme.txt
+++ b/board/qemu/m68k-mcf5208/readme.txt
@@ -1,5 +1,7 @@
 Run the emulation with:

- qemu-system-m68k -M mcf5208evb -cpu m5208 -kernel output/images/vmlinux -nographic # qemu_m68k_mcf5208_defconfig
+ qemu-system-m68k -M mcf5208evb -cpu m5208 -kernel output/images/vmlinux -nographic

 The login prompt will appear in the terminal that started Qemu.
+
+Tested with QEMU 2.12.0
--- a/board/qemu/m68k-q800/readme.txt
+++ b/board/qemu/m68k-q800/readme.txt
@@ -1,5 +1,8 @@
 Run the emulation with:

- qemu-system-m68k -M q800 -kernel output/images/vmlinux -nographic -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/sda console=ttyS0" # qemu_m68k_q800_defconfig
+ qemu-system-m68k -M q800 -kernel output/images/vmlinux -nographic -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/sda console=ttyS0"

 The login prompt will appear in the terminal that started Qemu.
+
+Tested with QEMU 2.11.0 from https://github.com/vivier/qemu-m68k
+You need following branch: q800-v2.11.0
--- a/board/qemu/microblazebe-mmu/0001-net-xilinx-xemaclite-add-2.00.b-revision.patch
+++ b/board/qemu/microblazebe-mmu/0001-net-xilinx-xemaclite-add-2.00.b-revision.patch
@@ -1,34 +0,0 @@
-From e96b73478232aa42b773cd19371808af69fd4b95 Mon Sep 17 00:00:00 2001
-From: Romain Naour <romain.naour@gmail.com>
-Date: Sat, 25 Apr 2020 09:49:11 +0200
-Subject: [PATCH] net: xilinx: xemaclite: add 2.00.b revision
-
-Patch added for the kernel 3.14
- fix networking in Qemu using a small patch
- disable DTS, because linux.bin does not include any DTB the
-  default Qemu included DTB is used and this is okay and works fine
-
-https://git.buildroot.net/buildroot/commit/board/qemu/microblazebe-mmu/xilinx-xemaclite.patch?id=fa2798548368d51998fad18d7f6d1ae0ed065b33
-
-[Romain: convert to git format]
-Signed-off-by: Romain Naour <romain.naour@gmail.com>
-Cc: Waldemar Brodkorb <wbx@openadk.org>
---
- drivers/net/ethernet/xilinx/xilinx_emaclite.c | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
-index 0de52e70abcc..d8c13140ca77 100644
--- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c
-+++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
-@@ -1278,6 +1278,7 @@ static const struct of_device_id xemaclite_of_match[] = {
- 	{ .compatible = "xlnx,opb-ethernetlite-1.01.b", },
- 	{ .compatible = "xlnx,xps-ethernetlite-1.00.a", },
- 	{ .compatible = "xlnx,xps-ethernetlite-2.00.a", },
-+	{ .compatible = "xlnx,xps-ethernetlite-2.00.b", },
- 	{ .compatible = "xlnx,xps-ethernetlite-2.01.a", },
- 	{ .compatible = "xlnx,xps-ethernetlite-3.00.a", },
- 	{ /* end of list */ },
-- 
-2.25.3
-
--- a/board/qemu/microblazebe-mmu/readme.txt
+++ b/board/qemu/microblazebe-mmu/readme.txt
@@ -1,5 +1,7 @@
 Run the emulation with:

- qemu-system-microblaze -M petalogix-s3adsp1800 -kernel output/images/linux.bin -serial stdio # qemu_microblazebe_mmu_defconfig
+ qemu-system-microblaze -M petalogix-s3adsp1800 -kernel output/images/linux.bin -serial stdio

 The login prompt will appear in the terminal that started Qemu.
+
+Tested with QEMU 2.12.0
--- a/board/qemu/microblazebe-mmu/xilinx-xemaclite.patch
+++ b/board/qemu/microblazebe-mmu/xilinx-xemaclite.patch
@@ -0,0 +1,11 @@
+diff -Nur linux-3.14.orig/drivers/net/ethernet/xilinx/xilinx_emaclite.c linux-3.14/drivers/net/ethernet/xilinx/xilinx_emaclite.c
+--- linux-3.14.orig/drivers/net/ethernet/xilinx/xilinx_emaclite.c	2014-03-31 05:40:15.000000000 +0200
+++ linux-3.14/drivers/net/ethernet/xilinx/xilinx_emaclite.c	2014-04-11 22:53:42.000000000 +0200
+@@ -1249,6 +1249,7 @@
+ 	{ .compatible = "xlnx,opb-ethernetlite-1.01.b", },
+ 	{ .compatible = "xlnx,xps-ethernetlite-1.00.a", },
+ 	{ .compatible = "xlnx,xps-ethernetlite-2.00.a", },
+	{ .compatible = "xlnx,xps-ethernetlite-2.00.b", },
+ 	{ .compatible = "xlnx,xps-ethernetlite-2.01.a", },
+ 	{ .compatible = "xlnx,xps-ethernetlite-3.00.a", },
+ 	{ /* end of list */ },
--- a/board/qemu/microblazeel-mmu/0001-net-xilinx-xemaclite-add-2.00.b-revision.patch
+++ b/board/qemu/microblazeel-mmu/0001-net-xilinx-xemaclite-add-2.00.b-revision.patch
@@ -1,34 +0,0 @@
-From e96b73478232aa42b773cd19371808af69fd4b95 Mon Sep 17 00:00:00 2001
-From: Romain Naour <romain.naour@gmail.com>
-Date: Sat, 25 Apr 2020 09:49:11 +0200
-Subject: [PATCH] net: xilinx: xemaclite: add 2.00.b revision
-
-Patch added for the kernel 3.14
- fix networking in Qemu using a small patch
- disable DTS, because linux.bin does not include any DTB the
-  default Qemu included DTB is used and this is okay and works fine
-
-https://git.buildroot.net/buildroot/commit/board/qemu/microblazebe-mmu/xilinx-xemaclite.patch?id=fa2798548368d51998fad18d7f6d1ae0ed065b33
-
-[Romain: convert to git format]
-Signed-off-by: Romain Naour <romain.naour@gmail.com>
-Cc: Waldemar Brodkorb <wbx@openadk.org>
---
- drivers/net/ethernet/xilinx/xilinx_emaclite.c | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
-index 0de52e70abcc..d8c13140ca77 100644
--- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c
-+++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
-@@ -1278,6 +1278,7 @@ static const struct of_device_id xemaclite_of_match[] = {
- 	{ .compatible = "xlnx,opb-ethernetlite-1.01.b", },
- 	{ .compatible = "xlnx,xps-ethernetlite-1.00.a", },
- 	{ .compatible = "xlnx,xps-ethernetlite-2.00.a", },
-+	{ .compatible = "xlnx,xps-ethernetlite-2.00.b", },
- 	{ .compatible = "xlnx,xps-ethernetlite-2.01.a", },
- 	{ .compatible = "xlnx,xps-ethernetlite-3.00.a", },
- 	{ /* end of list */ },
-- 
-2.25.3
-
--- a/board/qemu/microblazeel-mmu/readme.txt
+++ b/board/qemu/microblazeel-mmu/readme.txt
@@ -1,5 +1,7 @@
 Run the emulation with:

- qemu-system-microblazeel -M petalogix-s3adsp1800 -kernel output/images/linux.bin -serial stdio # qemu_microblazeel_mmu_defconfig
+ qemu-system-microblazeel -M petalogix-s3adsp1800 -kernel output/images/linux.bin -serial stdio

 The login prompt will appear in the terminal that started Qemu.
+
+Tested with QEMU 2.12.0
--- a/board/qemu/microblazeel-mmu/xilinx-xemaclite.patch
+++ b/board/qemu/microblazeel-mmu/xilinx-xemaclite.patch
@@ -0,0 +1,11 @@
+diff -Nur linux-3.14.orig/drivers/net/ethernet/xilinx/xilinx_emaclite.c linux-3.14/drivers/net/ethernet/xilinx/xilinx_emaclite.c
+--- linux-3.14.orig/drivers/net/ethernet/xilinx/xilinx_emaclite.c	2014-03-31 05:40:15.000000000 +0200
+++ linux-3.14/drivers/net/ethernet/xilinx/xilinx_emaclite.c	2014-04-11 22:53:42.000000000 +0200
+@@ -1249,6 +1249,7 @@
+ 	{ .compatible = "xlnx,opb-ethernetlite-1.01.b", },
+ 	{ .compatible = "xlnx,xps-ethernetlite-1.00.a", },
+ 	{ .compatible = "xlnx,xps-ethernetlite-2.00.a", },
+	{ .compatible = "xlnx,xps-ethernetlite-2.00.b", },
+ 	{ .compatible = "xlnx,xps-ethernetlite-2.01.a", },
+ 	{ .compatible = "xlnx,xps-ethernetlite-3.00.a", },
+ 	{ /* end of list */ },
--- a/board/qemu/mips32r2-malta/readme.txt
+++ b/board/qemu/mips32r2-malta/readme.txt
@@ -1,7 +1,9 @@
 Run the emulation with:

- qemu-system-mips -M malta -kernel output/images/vmlinux -serial stdio -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/hda" -net nic,model=pcnet -net user # qemu_mips32r2_malta_defconfig
+ qemu-system-mips -M malta -kernel output/images/vmlinux -serial stdio -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/hda" -net nic,model=pcnet -net user

 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer. No keyboard support has been
 enabled.
+
+Tested with QEMU 2.12.0
--- a/board/qemu/mips32r2el-malta/readme.txt
+++ b/board/qemu/mips32r2el-malta/readme.txt
@@ -1,7 +1,9 @@
 Run the emulation with:

- qemu-system-mipsel -M malta -kernel output/images/vmlinux -serial stdio -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/hda" -net nic,model=pcnet -net user # qemu_mips32r2el_malta_defconfig
+ qemu-system-mipsel -M malta -kernel output/images/vmlinux -serial stdio -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/hda" -net nic,model=pcnet -net user

 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer. No keyboard support has been
 enabled.
+
+Tested with QEMU 2.12.0
--- a/board/qemu/mips32r6-malta/readme.txt
+++ b/board/qemu/mips32r6-malta/readme.txt
@@ -1,5 +1,7 @@
 Run the emulation with:

- qemu-system-mips -M malta -cpu mips32r6-generic -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/hda" -nographic # qemu_mips32r6_malta_defconfig
+qemu-system-mips -M malta -cpu mips32r6-generic -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/hda" -nographic

 The login prompt will appear in the terminal that started Qemu.
+
+Tested with QEMU 2.12.0
--- a/board/qemu/mips32r6el-malta/readme.txt
+++ b/board/qemu/mips32r6el-malta/readme.txt
@@ -1,5 +1,7 @@
 Run the emulation with:

- qemu-system-mipsel -M malta -cpu mips32r6-generic -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/hda" -net nic,model=pcnet -net user -nographic # qemu_mips32r6el_malta_defconfig
+qemu-system-mipsel -M malta -cpu mips32r6-generic -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/hda" -net nic,model=pcnet -net user -nographic

 The login prompt will appear in the terminal that started Qemu.
+
+Tested with QEMU 2.12.0
--- a/board/qemu/mips64-malta/readme.txt
+++ b/board/qemu/mips64-malta/readme.txt
@@ -1,6 +1,8 @@
 Run the emulation with:

- qemu-system-mips64 -M malta -kernel output/images/vmlinux -serial stdio -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/hda" # qemu_mips64_malta_defconfig
+ qemu-system-mips64 -M malta -kernel output/images/vmlinux -serial stdio -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/hda"

 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.
+
+Tested with QEMU 2.12.0
--- a/board/qemu/mips64el-malta/readme.txt
+++ b/board/qemu/mips64el-malta/readme.txt
@@ -1,6 +1,8 @@
 Run the emulation with:

- qemu-system-mips64el -M malta -kernel output/images/vmlinux -serial stdio -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/hda" # qemu_mips64el_malta_defconfig
+ qemu-system-mips64el -M malta -kernel output/images/vmlinux -serial stdio -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/hda"

 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.
+
+Tested with QEMU 2.12.0
--- a/board/qemu/mips64r6-malta/readme.txt
+++ b/board/qemu/mips64r6-malta/readme.txt
@@ -1,5 +1,7 @@
 Run the emulation with:

- qemu-system-mips64 -M malta -cpu I6400 -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/hda" -nographic # qemu_mips64r6_malta_defconfig
+ qemu-system-mips64 -M malta -cpu I6400 -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/hda" -nographic

 The login prompt will appear in the terminal that started Qemu.
+
+Tested with QEMU 2.12.0
--- a/board/qemu/mips64r6el-malta/readme.txt
+++ b/board/qemu/mips64r6el-malta/readme.txt
@@ -1,5 +1,7 @@
 Run the emulation with:

- qemu-system-mips64el -M malta -cpu I6400 -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/hda" -nographic # qemu_mips64r6el_malta_defconfig
+ qemu-system-mips64el -M malta -cpu I6400 -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/hda" -nographic

 The login prompt will appear in the terminal that started Qemu.
+
+Tested with QEMU 2.12.0
--- a/board/qemu/nios2-10m50/linux.fragment
+++ b/board/qemu/nios2-10m50/linux.fragment
@@ -1,3 +1,3 @@
 # Embed the DTB in the kernel image
 CONFIG_NIOS2_DTB_SOURCE_BOOL=y
-CONFIG_NIOS2_DTB_SOURCE="10m50_devboard.dts"
+CONFIG_NIOS2_DTB_SOURCE="arch/nios2/boot/dts/10m50_devboard.dts"
--- a/board/qemu/nios2-10m50/readme.txt
+++ b/board/qemu/nios2-10m50/readme.txt
@@ -1,5 +1,7 @@
 Run the emulation with:

-  qemu-system-nios2 -kernel output/images/vmlinux -nographic # qemu_nios2_10m50_defconfig
+  qemu-system-nios2 -kernel output/images/vmlinux -nographic

 The login prompt will appear in the terminal that started Qemu.
+
+Tested with QEMU 2.12.0.
--- a/board/qemu/or1k/readme.txt
+++ b/board/qemu/or1k/readme.txt
@@ -1,7 +1,9 @@
 Run the emulation with:

- qemu-system-or1k -kernel output/images/vmlinux -nographic # qemu_or1k_defconfig
+ qemu-system-or1k -kernel output/images/vmlinux -nographic

 The login prompt will appear in the terminal that started Qemu.

 Ethernet support is not working, yet.
+
+Tested with QEMU 2.12.0.
--- a/board/qemu/post-image.sh
+++ b/board/qemu/post-image.sh
@@ -1,55 +0,0 @@
-#!/bin/bash
-
-QEMU_BOARD_DIR="$(dirname $0)"
-DEFCONFIG_NAME="$(basename $2)"
-README_FILES="${QEMU_BOARD_DIR}/*/readme.txt"
-START_QEMU_SCRIPT="${BINARIES_DIR}/start-qemu.sh"
-
-if [[ "${DEFCONFIG_NAME}" =~ ^"qemu_*" ]]; then
-    # Not a Qemu defconfig, can't test.
-    exit 0
-fi
-
-# Search for "# qemu_*_defconfig" tag in all readme.txt files.
-# Qemu command line on multilines using back slash are accepted.
-QEMU_CMD_LINE=$(sed -r ':a; /\\$/N; s/\\\n//; s/\t/ /; ta; /# '${DEFCONFIG_NAME}'$/!d; s/#.*//' ${README_FILES})
-
-if [ -z "${QEMU_CMD_LINE}" ]; then
-    # No Qemu cmd line found, can't test.
-    exit 0
-fi
-
-# Replace output/images path by ${IMAGE_DIR} since the script
-# will be in the same directory as the kernel and the rootfs images.
-QEMU_CMD_LINE="${QEMU_CMD_LINE//output\/images/\${IMAGE_DIR\}}"
-
-# Remove -serial stdio if present, keep it as default args
-DEFAULT_ARGS="$(sed -r -e '/-serial stdio/!d; s/.*(-serial stdio).*/\1/' <<<"${QEMU_CMD_LINE}")"
-QEMU_CMD_LINE="${QEMU_CMD_LINE//-serial stdio/}"
-
-# Disable graphical output and redirect serial I/Os to console
-case ${DEFCONFIG_NAME} in
-  (qemu_sh4eb_r2d_defconfig|qemu_sh4_r2d_defconfig)
-    # Special case for SH4
-    SERIAL_ARGS="-serial stdio -display none"
-    ;;
-  (*)
-    SERIAL_ARGS="-nographic"
-    ;;
-esac
-
-cat <<-_EOF_ > "${START_QEMU_SCRIPT}"
-	#!/bin/sh
-	IMAGE_DIR="\${0%/*}/"
-
-	if [ "\${1}" = "serial-only" ]; then
-	    EXTRA_ARGS='${SERIAL_ARGS}'
-	else
-	    EXTRA_ARGS='${DEFAULT_ARGS}'
-	fi
-
-	export PATH="${HOST_DIR}/bin:\${PATH}"
-	exec ${QEMU_CMD_LINE} \${EXTRA_ARGS}
-_EOF_
-
-chmod +x "${START_QEMU_SCRIPT}"
--- a/Show More
+++ b/Show More