Update for 2016.08.1

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

.defconfig

@@ -15,6 +15,7 @@ BR2_i386=y
 # BR2_nios2 is not set
 # BR2_powerpc is not set
 # BR2_sh is not set
+# BR2_sh64 is not set
 # BR2_sparc is not set
 # BR2_sparc64 is not set
 # BR2_x86_64 is not set

.gitlab-ci.yml

@@ -1,257 +0,0 @@
-# Configuration for Gitlab-CI.
-# Builds appear on https://gitlab.com/buildroot.org/buildroot/pipelines
-# The .gitlab-ci.yml file is generated from .gitlab-ci.yml.in.
-# It needs to be regenerated every time a defconfig is added, using
-# "make .gitlab-ci.yml".
-
-image: buildroot/base
-
-.defconfig_script: &defconfig_script
-    - echo 'Configure Buildroot'
-    - make ${CI_BUILD_NAME}
-    - echo 'Build buildroot'
-    - |
-        make > >(tee build.log |grep '>>>') 2>&1 || {
-            echo 'Failed build last output'
-            tail -200 build.log
-            exit 1
-        }
-
-check-gitlab-ci.yml:
-    script:
-        - mv .gitlab-ci.yml .gitlab-ci.yml.orig
-        - make .gitlab-ci.yml
-        - diff -u .gitlab-ci.yml.orig .gitlab-ci.yml
-
-check-DEVELOPERS:
-    # get-developers should print just "No action specified"; if it prints
-    # anything else, it's a parse error.
-    # The initial ! is removed by YAML so we need to quote it.
-    script:
-        - "! utils/get-developers | grep -v 'No action specified'"
-
-.defconfig: &defconfig
-    # Running the defconfigs for every push is too much, so limit to
-    # explicit triggers through the API.
-    only:
-        - triggers
-        - tags
-    script: *defconfig_script
-    artifacts:
-        when: always
-        expire_in: 2 weeks
-        paths:
-            - build.log
-            - output/images/
-            - output/build/build-time.log
-            - output/build/packages-file-list.txt
-
-.runtime_test: &runtime_test
-    # Keep build directories so the rootfs can be an artifact of the job. The
-    # runner will clean up those files for us.
-    # Multiply every emulator timeout by 10 to avoid sporadic failures in
-    # elastic runners.
-    script: ./support/testing/run-tests -o test-output/ -d test-dl/ -k --timeout-multiplier 10 ${CI_BUILD_NAME}
-    artifacts:
-        when: always
-        expire_in: 2 weeks
-        paths:
-            - test-output/*.log
-            - test-output/*/images/*
-acmesystems_aria_g25_128mb_defconfig: *defconfig
-acmesystems_aria_g25_256mb_defconfig: *defconfig
-acmesystems_arietta_g25_128mb_defconfig: *defconfig
-acmesystems_arietta_g25_256mb_defconfig: *defconfig
-arcturus_ucp1020_defconfig: *defconfig
-arm_foundationv8_defconfig: *defconfig
-arm_juno_defconfig: *defconfig
-armadeus_apf27_defconfig: *defconfig
-armadeus_apf28_defconfig: *defconfig
-armadeus_apf51_defconfig: *defconfig
-at91sam9260eknf_defconfig: *defconfig
-at91sam9g20dfc_defconfig: *defconfig
-at91sam9g45m10ek_defconfig: *defconfig
-at91sam9rlek_defconfig: *defconfig
-at91sam9x5ek_defconfig: *defconfig
-at91sam9x5ek_dev_defconfig: *defconfig
-at91sam9x5ek_mmc_defconfig: *defconfig
-at91sam9x5ek_mmc_dev_defconfig: *defconfig
-atmel_sama5d2_xplained_mmc_defconfig: *defconfig
-atmel_sama5d2_xplained_mmc_dev_defconfig: *defconfig
-atmel_sama5d3_xplained_defconfig: *defconfig
-atmel_sama5d3_xplained_dev_defconfig: *defconfig
-atmel_sama5d3_xplained_mmc_defconfig: *defconfig
-atmel_sama5d3_xplained_mmc_dev_defconfig: *defconfig
-atmel_sama5d3xek_defconfig: *defconfig
-atmel_sama5d4_xplained_defconfig: *defconfig
-atmel_sama5d4_xplained_dev_defconfig: *defconfig
-atmel_sama5d4_xplained_mmc_defconfig: *defconfig
-atmel_sama5d4_xplained_mmc_dev_defconfig: *defconfig
-bananapro_defconfig: *defconfig
-beagleboardx15_defconfig: *defconfig
-beaglebone_defconfig: *defconfig
-beaglebone_qt5_defconfig: *defconfig
-chromebook_snow_defconfig: *defconfig
-ci20_defconfig: *defconfig
-ci40_defconfig: *defconfig
-csky_gx6605s_defconfig: *defconfig
-cubieboard2_defconfig: *defconfig
-engicam_imx6qdl_icore_defconfig: *defconfig
-engicam_imx6qdl_icore_rqs_defconfig: *defconfig
-engicam_imx6ul_geam_defconfig: *defconfig
-engicam_imx6ul_isiot_defconfig: *defconfig
-firefly_rk3288_defconfig: *defconfig
-firefly_rk3288_demo_defconfig: *defconfig
-freescale_imx28evk_defconfig: *defconfig
-freescale_imx31_3stack_defconfig: *defconfig
-freescale_imx6dlsabreauto_defconfig: *defconfig
-freescale_imx6dlsabresd_defconfig: *defconfig
-freescale_imx6qsabreauto_defconfig: *defconfig
-freescale_imx6qsabresd_defconfig: *defconfig
-freescale_imx6sololiteevk_defconfig: *defconfig
-freescale_imx6sxsabresd_defconfig: *defconfig
-freescale_imx6ulevk_defconfig: *defconfig
-freescale_imx7dsabresd_defconfig: *defconfig
-freescale_mpc8315erdb_defconfig: *defconfig
-freescale_p1010rdb_pa_defconfig: *defconfig
-galileo_defconfig: *defconfig
-gdb_bfin_bf512_defconfig: *defconfig
-grinn_chiliboard_defconfig: *defconfig
-grinn_liteboard_defconfig: *defconfig
-imx23evk_defconfig: *defconfig
-imx6q-sabresd_defconfig: *defconfig
-imx6ulpico_defconfig: *defconfig
-lego_ev3_defconfig: *defconfig
-linksprite_pcduino_defconfig: *defconfig
-minnowboard_max-graphical_defconfig: *defconfig
-minnowboard_max_defconfig: *defconfig
-mx25pdk_defconfig: *defconfig
-mx51evk_defconfig: *defconfig
-mx53loco_defconfig: *defconfig
-mx6cubox_defconfig: *defconfig
-mx6sx_udoo_neo_defconfig: *defconfig
-mx6udoo_defconfig: *defconfig
-nanopi_m1_defconfig: *defconfig
-nanopi_m1_plus_defconfig: *defconfig
-nanopi_neo_defconfig: *defconfig
-nexbox_a95x_defconfig: *defconfig
-nitrogen6sx_defconfig: *defconfig
-nitrogen6x_defconfig: *defconfig
-nitrogen7_defconfig: *defconfig
-odroidc2_defconfig: *defconfig
-olimex_a13_olinuxino_defconfig: *defconfig
-olimex_a20_olinuxino_lime2_defconfig: *defconfig
-olimex_a20_olinuxino_lime_defconfig: *defconfig
-olimex_a20_olinuxino_lime_mali_defconfig: *defconfig
-olimex_a20_olinuxino_micro_defconfig: *defconfig
-olimex_imx233_olinuxino_defconfig: *defconfig
-openblocks_a6_defconfig: *defconfig
-orangepi_one_defconfig: *defconfig
-orangepi_pc_defconfig: *defconfig
-orangepi_plus_defconfig: *defconfig
-orangepi_zero_defconfig: *defconfig
-pandaboard_defconfig: *defconfig
-pc_x86_64_bios_defconfig: *defconfig
-pc_x86_64_efi_defconfig: *defconfig
-qemu_aarch64_virt_defconfig: *defconfig
-qemu_arm_versatile_defconfig: *defconfig
-qemu_arm_versatile_nommu_defconfig: *defconfig
-qemu_arm_vexpress_defconfig: *defconfig
-qemu_m68k_mcf5208_defconfig: *defconfig
-qemu_m68k_q800_defconfig: *defconfig
-qemu_microblazebe_mmu_defconfig: *defconfig
-qemu_microblazeel_mmu_defconfig: *defconfig
-qemu_mips32r2_malta_defconfig: *defconfig
-qemu_mips32r2el_malta_defconfig: *defconfig
-qemu_mips32r6_malta_defconfig: *defconfig
-qemu_mips32r6el_malta_defconfig: *defconfig
-qemu_mips64_malta_defconfig: *defconfig
-qemu_mips64el_malta_defconfig: *defconfig
-qemu_mips64r6_malta_defconfig: *defconfig
-qemu_mips64r6el_malta_defconfig: *defconfig
-qemu_nios2_10m50_defconfig: *defconfig
-qemu_or1k_defconfig: *defconfig
-qemu_ppc64_pseries_defconfig: *defconfig
-qemu_ppc_g3beige_defconfig: *defconfig
-qemu_ppc_mpc8544ds_defconfig: *defconfig
-qemu_ppc_virtex_ml507_defconfig: *defconfig
-qemu_sh4_r2d_defconfig: *defconfig
-qemu_sh4eb_r2d_defconfig: *defconfig
-qemu_sparc64_sun4u_defconfig: *defconfig
-qemu_sparc_ss10_defconfig: *defconfig
-qemu_x86_64_defconfig: *defconfig
-qemu_x86_defconfig: *defconfig
-qemu_xtensa_lx60_defconfig: *defconfig
-qemu_xtensa_lx60_nommu_defconfig: *defconfig
-raspberrypi0_defconfig: *defconfig
-raspberrypi2_defconfig: *defconfig
-raspberrypi3_64_defconfig: *defconfig
-raspberrypi3_defconfig: *defconfig
-raspberrypi_defconfig: *defconfig
-riotboard_defconfig: *defconfig
-roseapplepi_defconfig: *defconfig
-s6lx9_microboard_defconfig: *defconfig
-sheevaplug_defconfig: *defconfig
-snps_aarch64_vdk_defconfig: *defconfig
-snps_arc700_axs101_defconfig: *defconfig
-snps_archs38_axs103_defconfig: *defconfig
-snps_archs38_haps_defconfig: *defconfig
-snps_archs38_vdk_defconfig: *defconfig
-socrates_cyclone5_defconfig: *defconfig
-stm32f429_disco_defconfig: *defconfig
-stm32f469_disco_defconfig: *defconfig
-telit_evk_pro3_defconfig: *defconfig
-toradex_apalis_imx6_defconfig: *defconfig
-ts4800_defconfig: *defconfig
-ts4900_defconfig: *defconfig
-ts5x00_defconfig: *defconfig
-wandboard_defconfig: *defconfig
-warp7_defconfig: *defconfig
-warpboard_defconfig: *defconfig
-zynq_microzed_defconfig: *defconfig
-zynq_zc706_defconfig: *defconfig
-zynq_zed_defconfig: *defconfig
-zynq_zybo_defconfig: *defconfig
-tests.core.test_post_scripts.TestPostScripts: *runtime_test
-tests.core.test_rootfs_overlay.TestRootfsOverlay: *runtime_test
-tests.core.test_timezone.TestGlibcAllTimezone: *runtime_test
-tests.core.test_timezone.TestGlibcNonDefaultLimitedTimezone: *runtime_test
-tests.core.test_timezone.TestNoTimezone: *runtime_test
-tests.fs.test_ext.TestExt2: *runtime_test
-tests.fs.test_ext.TestExt2r1: *runtime_test
-tests.fs.test_ext.TestExt3: *runtime_test
-tests.fs.test_ext.TestExt4: *runtime_test
-tests.fs.test_iso9660.TestIso9660Grub2External: *runtime_test
-tests.fs.test_iso9660.TestIso9660Grub2Internal: *runtime_test
-tests.fs.test_iso9660.TestIso9660GrubExternal: *runtime_test
-tests.fs.test_iso9660.TestIso9660GrubInternal: *runtime_test
-tests.fs.test_iso9660.TestIso9660SyslinuxExternal: *runtime_test
-tests.fs.test_iso9660.TestIso9660SyslinuxInternal: *runtime_test
-tests.fs.test_jffs2.TestJffs2: *runtime_test
-tests.fs.test_squashfs.TestSquashfs: *runtime_test
-tests.fs.test_ubi.TestUbi: *runtime_test
-tests.fs.test_yaffs2.TestYaffs2: *runtime_test
-tests.init.test_busybox.TestInitSystemBusyboxRo: *runtime_test
-tests.init.test_busybox.TestInitSystemBusyboxRoNet: *runtime_test
-tests.init.test_busybox.TestInitSystemBusyboxRw: *runtime_test
-tests.init.test_busybox.TestInitSystemBusyboxRwNet: *runtime_test
-tests.init.test_none.TestInitSystemNone: *runtime_test
-tests.init.test_systemd.TestInitSystemSystemdRoFull: *runtime_test
-tests.init.test_systemd.TestInitSystemSystemdRoIfupdown: *runtime_test
-tests.init.test_systemd.TestInitSystemSystemdRoNetworkd: *runtime_test
-tests.init.test_systemd.TestInitSystemSystemdRwFull: *runtime_test
-tests.init.test_systemd.TestInitSystemSystemdRwIfupdown: *runtime_test
-tests.init.test_systemd.TestInitSystemSystemdRwNetworkd: *runtime_test
-tests.package.test_dropbear.TestDropbear: *runtime_test
-tests.package.test_ipython.TestIPythonPy2: *runtime_test
-tests.package.test_ipython.TestIPythonPy3: *runtime_test
-tests.package.test_python.TestPython2: *runtime_test
-tests.package.test_python.TestPython3: *runtime_test
-tests.toolchain.test_external.TestExternalToolchainBuildrootMusl: *runtime_test
-tests.toolchain.test_external.TestExternalToolchainBuildrootuClibc: *runtime_test
-tests.toolchain.test_external.TestExternalToolchainCCache: *runtime_test
-tests.toolchain.test_external.TestExternalToolchainCtngMusl: *runtime_test
-tests.toolchain.test_external.TestExternalToolchainLinaroArm: *runtime_test
-tests.toolchain.test_external.TestExternalToolchainSourceryArmv4: *runtime_test
-tests.toolchain.test_external.TestExternalToolchainSourceryArmv5: *runtime_test
-tests.toolchain.test_external.TestExternalToolchainSourceryArmv7: *runtime_test

.gitlab-ci.yml.in

@@ -1,60 +0,0 @@
-# Configuration for Gitlab-CI.
-# Builds appear on https://gitlab.com/buildroot.org/buildroot/pipelines
-# The .gitlab-ci.yml file is generated from .gitlab-ci.yml.in.
-# It needs to be regenerated every time a defconfig is added, using
-# "make .gitlab-ci.yml".
-
-image: buildroot/base
-
-.defconfig_script: &defconfig_script
-    - echo 'Configure Buildroot'
-    - make ${CI_BUILD_NAME}
-    - echo 'Build buildroot'
-    - |
-        make > >(tee build.log |grep '>>>') 2>&1 || {
-            echo 'Failed build last output'
-            tail -200 build.log
-            exit 1
-        }
-
-check-gitlab-ci.yml:
-    script:
-        - mv .gitlab-ci.yml .gitlab-ci.yml.orig
-        - make .gitlab-ci.yml
-        - diff -u .gitlab-ci.yml.orig .gitlab-ci.yml
-
-check-DEVELOPERS:
-    # get-developers should print just "No action specified"; if it prints
-    # anything else, it's a parse error.
-    # The initial ! is removed by YAML so we need to quote it.
-    script:
-        - "! utils/get-developers | grep -v 'No action specified'"
-
-.defconfig: &defconfig
-    # Running the defconfigs for every push is too much, so limit to
-    # explicit triggers through the API.
-    only:
-        - triggers
-        - tags
-    script: *defconfig_script
-    artifacts:
-        when: always
-        expire_in: 2 weeks
-        paths:
-            - build.log
-            - output/images/
-            - output/build/build-time.log
-            - output/build/packages-file-list.txt
-
-.runtime_test: &runtime_test
-    # Keep build directories so the rootfs can be an artifact of the job. The
-    # runner will clean up those files for us.
-    # Multiply every emulator timeout by 10 to avoid sporadic failures in
-    # elastic runners.
-    script: ./support/testing/run-tests -o test-output/ -d test-dl/ -k --timeout-multiplier 10 ${CI_BUILD_NAME}
-    artifacts:
-        when: always
-        expire_in: 2 weeks
-        paths:
-            - test-output/*.log
-            - test-output/*/images/*

Config.in

@@ -14,23 +14,18 @@ config BR2_HOSTARCH
 	string
 	option env="HOSTARCH"
 
-config BR2_BUILD_DIR
+config BR2_EXTERNAL
 	string
-	option env="BUILD_DIR"
+	option env="BR2_EXTERNAL"
 
 # Hidden config symbols for packages to check system gcc version
 config BR2_HOST_GCC_VERSION
 	string
 	option env="HOST_GCC_VERSION"
 
-config BR2_HOST_GCC_AT_LEAST_4_5
-	bool
-	default y if BR2_HOST_GCC_VERSION = "4 5"
-
 config BR2_HOST_GCC_AT_LEAST_4_6
 	bool
 	default y if BR2_HOST_GCC_VERSION = "4 6"
-	select BR2_HOST_GCC_AT_LEAST_4_5
 
 config BR2_HOST_GCC_AT_LEAST_4_7
 	bool
@@ -57,11 +52,6 @@ config BR2_HOST_GCC_AT_LEAST_6
 	default y if BR2_HOST_GCC_VERSION = "6"
 	select BR2_HOST_GCC_AT_LEAST_5
 
-config BR2_HOST_GCC_AT_LEAST_7
-	bool
-	default y if BR2_HOST_GCC_VERSION = "7"
-	select BR2_HOST_GCC_AT_LEAST_6
-
 # Hidden boolean selected by packages in need of Java in order to build
 # (example: xbmc)
 config BR2_NEEDS_HOST_JAVA
@@ -89,11 +79,6 @@ config BR2_HOSTARCH_NEEDS_IA32_LIBS
 config BR2_HOSTARCH_NEEDS_IA32_COMPILER
 	bool
 
-# Hidden boolean selected by packages that need the host to have an
-# UTF8 locale.
-config BR2_NEEDS_HOST_UTF8_LOCALE
-	bool
-
 source "arch/Config.in"
 
 menu "Build options"
@@ -163,13 +148,6 @@ config BR2_XZCAT
 	  Command to be used to extract a xz'ed file to stdout.
 	  Default is "xzcat"
 
-config BR2_LZCAT
-	string "lzcat command"
-	default "lzip -d -c"
-	help
-	  Command to be used to extract a lzip'ed file to stdout.
-	  Default is "lzip -d -c"
-
 config BR2_TAR_OPTIONS
 	string "Tar options"
 	default ""
@@ -379,6 +357,40 @@ config BR2_CCACHE_USE_BASEDIR
 
 endif
 
+config BR2_DEPRECATED
+	bool "Show options and packages that are deprecated or obsolete"
+	help
+	  This option shows outdated/obsolete versions of packages and
+	  options that are otherwise hidden.
+
+if BR2_DEPRECATED
+
+config BR2_DEPRECATED_SINCE_2015_05
+	bool
+	default y
+
+config BR2_DEPRECATED_SINCE_2015_08
+	bool
+	default y
+
+config BR2_DEPRECATED_SINCE_2015_11
+	bool
+	default y
+
+config BR2_DEPRECATED_SINCE_2016_02
+	bool
+	default y
+
+config BR2_DEPRECATED_SINCE_2016_05
+	bool
+	default y
+
+config BR2_DEPRECATED_SINCE_2016_08
+	bool
+	default y
+
+endif
+
 config BR2_ENABLE_DEBUG
 	bool "build packages with debugging symbols"
 	help
@@ -419,10 +431,13 @@ config BR2_DEBUG_3
 endchoice
 endif
 
+choice
+	prompt "strip command for binaries on target"
+	default BR2_STRIP_strip
+
 config BR2_STRIP_strip
-	bool "strip target binaries"
+	bool "strip"
 	depends on !BR2_PACKAGE_HOST_ELF2FLT
-	default y
 	help
 	  Binaries and libraries in the target filesystem will be
 	  stripped using the normal 'strip' command. This allows to save
@@ -430,9 +445,15 @@ config BR2_STRIP_strip
 	  on the target are needed for native debugging, but not when
 	  remote debugging is used.
 
+config BR2_STRIP_none
+	bool "none"
+	help
+	  Do not strip binaries and libraries in the target filesystem.
+endchoice
+
 config BR2_STRIP_EXCLUDE_FILES
 	string "executables that should not be stripped"
-	depends on BR2_STRIP_strip
+	depends on !BR2_STRIP_none
 	default ""
 	help
 	  You may specify a space-separated list of binaries and
@@ -440,7 +461,7 @@ config BR2_STRIP_EXCLUDE_FILES
 
 config BR2_STRIP_EXCLUDE_DIRS
 	string "directories that should be skipped when stripping"
-	depends on BR2_STRIP_strip
+	depends on !BR2_STRIP_none
 	default ""
 	help
 	  You may specify a space-separated list of directories that
@@ -532,11 +553,7 @@ config BR2_GOOGLE_BREAKPAD_ENABLE
 	bool "Enable google-breakpad support"
 	select BR2_PACKAGE_GOOGLE_BREAKPAD
 	depends on BR2_INSTALL_LIBSTDCPP
-	depends on BR2_HOST_GCC_AT_LEAST_4_8 # C++11
-	depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_8 # C++11
-	depends on BR2_USE_WCHAR
-	depends on BR2_TOOLCHAIN_HAS_THREADS
-	depends on (BR2_TOOLCHAIN_USES_GLIBC || BR2_TOOLCHAIN_USES_UCLIBC)
+	depends on BR2_TOOLCHAIN_USES_GLIBC
 	depends on BR2_PACKAGE_GOOGLE_BREAKPAD_ARCH_SUPPORTS
 	help
 	  This option will enable the use of google breakpad, a library
@@ -717,12 +734,6 @@ config BR2_REPRODUCIBLE
 	  this allows to generate exactly identical binaries from one
 	  build to the other, including on different machines.
 
-	  The current implementation is restricted to builds with the
-	  same output directory. Many (absolute) paths are recorded in
-	  intermediary files, and it is very likely that some of these
-	  paths leak into the target rootfs. If you build with the
-	  same O=... path, however, the result is identical.
-
 	  This is labeled as an experimental feature, as not all
 	  packages behave properly to ensure reproducibility.
 
@@ -746,4 +757,9 @@ source "package/Config.in.host"
 
 source "Config.in.legacy"
 
-source "$BR2_BUILD_DIR/.br2-external.in"
+menu "User-provided options"
+	depends on BR2_EXTERNAL != "support/dummy-external"
+
+source "$BR2_EXTERNAL/Config.in"
+
+endmenu

Config.in.legacy

@@ -142,745 +142,9 @@ comment "build, or run, in unpredictable ways.               "
 comment "----------------------------------------------------"
 endif
 
-###############################################################################
-comment "Legacy options removed in 2017.08"
-
-config BR2_PACKAGE_SIMICSFS
-	bool "simicsfs support removed"
-	select BR2_LEGACY
-	help
-	  Support for simicsfs kernel driver that provides access to a
-	  host computer's local filesystem when the target is
-	  executing within a SIMICS simulation has been removed.
-
-	  Simics is now moving away from the simicsfs kernel module,
-	  as the kernel module has required too much maintenance
-	  work. Users should move to the user mode Simics agent
-	  instead.
-
-config BR2_BINUTILS_VERSION_2_26_X
-	bool "binutils version 2.26 support removed"
-	select BR2_LEGACY
-	help
-	  Support for binutils version 2.26 has been removed. The
-	  current default version (2.28 or later) has been selected
-	  instead.
-
-config BR2_XTENSA_OVERLAY_DIR
-	string "The BR2_XTENSA_OVERLAY_DIR option has been removed"
-	help
-	  The BR2_XTENSA_OVERLAY_DIR has been removed in favour of
-	  BR2_XTENSA_OVERLAY_FILE. You must now pass the complete
-	  path to the overlay file, not to the directory containing
-	  it.
-
-config BR2_XTENSA_OVERLAY_DIR_WRAP
-	bool
-	default y if BR2_XTENSA_OVERLAY_DIR != ""
-	select BR2_LEGACY
-
-config BR2_XTENSA_CUSTOM_NAME
-	string "The BR2_XTENSA_CUSTOM_NAME option has been removed"
-	help
-	  The BR2_XTENSA_CUSTOM_NAME option has been removed.
-
-config BR2_XTENSA_CUSTOM_NAME_WRAP
-	bool
-	default y if BR2_XTENSA_CUSTOM_NAME != ""
-	select BR2_LEGACY
-
-config BR2_PACKAGE_HOST_MKE2IMG
-	bool "host mke2img has been removed"
-	select BR2_LEGACY
-	help
-	  We now call mkfs directly to generate ext2/3/4 filesystem
-	  image, so mke2img is no longer necessary.
-
-config BR2_TARGET_ROOTFS_EXT2_BLOCKS
-	int "exact size in blocks has been removed"
-	default 0
-	help
-	  This option has been removed in favor of
-	  BR2_TARGET_ROOTFS_EXT2_SIZE. It has been set automatically
-	  to the value you had before. Set to 0 here to remove the
-	  warning.
-
-config BR2_TARGET_ROOTFS_EXT2_BLOCKS_WRAP
-	bool
-	default y if BR2_TARGET_ROOTFS_EXT2_BLOCKS != 0 && \
-		BR2_TARGET_ROOTFS_EXT2_BLOCKS != 61440 # deprecated default value
-	select BR2_LEGACY
-
-# Note: BR2_TARGET_ROOTFS_EXT2_BLOCKS_WRAP still referenced in fs/ext2/Config.in
-
-config BR2_TARGET_ROOTFS_EXT2_EXTRA_INODES
-	int "ext2 extra inodes has been removed" if BR2_TARGET_ROOTFS_EXT2_INODES = 0
-	default 0
-	help
-	  Buildroot now uses mkfs.ext2/3/4 to generate ext2/3/4
-	  images. It now automatically selects the number of inodes
-	  based on the image size. The extra number of inodes can no
-	  longer be provided; instead, provide the total number of
-	  inodes needed in BR2_TARGET_ROOTFS_EXT2_INODES.
-
-config BR2_TARGET_ROOTFS_EXT2_EXTRA_INODES_WRAP
-	bool
-	default y if BR2_TARGET_ROOTFS_EXT2_EXTRA_INODES != 0
-	select BR2_LEGACY
-
-config BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_CDXAPARSE
-	bool "cdxaparse removed"
-	select BR2_LEGACY
-
-config BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_DATAURISRC
-	bool "dataurisrc moved to gstreamer1"
-	select BR2_LEGACY
-	help
-	  Dataurisrc has moved to gstreamer core and is always built.
-
-config BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_DCCP
-	bool "dccp removed"
-	select BR2_LEGACY
-
-config BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_HDVPARSE
-	bool "hdvparse removed"
-	select BR2_LEGACY
-
-config BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_MVE
-	bool "mve removed"
-	select BR2_LEGACY
-
-config BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_NUVDEMUX
-	bool "nuvdemux removed"
-	select BR2_LEGACY
-
-config BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_PATCHDETECT
-	bool "patchdetect removed"
-	select BR2_LEGACY
-
-config BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_SDI
-	bool "sdi removed"
-	select BR2_LEGACY
-
-config BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_TTA
-	bool "tta removed"
-	select BR2_LEGACY
-
-config BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_VIDEOMEASURE
-	bool "videomeasure removed"
-	select BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_IQA
-	select BR2_LEGACY
-	help
-	  videomeasure plugin has been removed and has been replaced by
-	  iqa, which has automatically been enabled.
-
-config BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_APEXSINK
-	bool "apexsink removed"
-	select BR2_LEGACY
-
-config BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_SDL
-	bool "sdl removed"
-	select BR2_LEGACY
-
-config BR2_PACKAGE_GST1_PLUGINS_UGLY_PLUGIN_MAD
-	bool "mad (*.mp3 audio) removed"
-	select BR2_LEGACY
-
-config BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_WEBRTC
-	bool "gst1-plugins-bad webrtc renamed to webrtcdsp"
-	select BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_WEBRTCDSP
-	select BR2_LEGACY
-	help
-	  The WebRTC plugin in GStreamer 1.x has always been named
-	  webrtcdsp, but was wrongly introduced in Buildroot under the
-	  name webrtc. Therefore, we have renamed the option to match
-	  the actual name of the GStreamer plugin.
-
-config BR2_STRIP_none
-	bool "Strip command 'none' has been removed"
-	select BR2_LEGACY
-	help
-	  The strip command choice has been changed into a single
-	  boolean option. Please check that the new setting is
-	  correct (in the "Build options" sub-menu)
-
-config BR2_PACKAGE_BEECRYPT_CPP
-	bool "C++ support removed in beecrypt"
-	select BR2_LEGACY
-	help
-	  Support for C++ depends on icu. The beecrypt package is
-	  incompatible with icu 59+.
-
-config BR2_PACKAGE_SPICE_CLIENT
-	bool "spice client support removed"
-	select BR2_LEGACY
-	help
-	  Spice client support has been removed upstream. The
-	  functionality now lives in the spice-gtk widget and
-	  virt-viewer.
-
-config BR2_PACKAGE_SPICE_GUI
-	bool "spice gui support removed"
-	select BR2_LEGACY
-	help
-	  Spice gui support has been removed upstream. The
-	  functionality now lives in the spice-gtk widget and
-	  virt-viewer.
-
-config BR2_PACKAGE_SPICE_TUNNEL
-	bool "spice network redirection removed"
-	select BR2_LEGACY
-	help
-	  Spice network redirection, aka tunnelling has been removed
-	  upstream.
-
-config BR2_PACKAGE_INPUT_TOOLS
-	bool "input-tools removed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_LINUXCONSOLETOOLS
-	help
-	  input-tools has been removed, it is replaced by
-	  linuxconsoletools, which has automatically been enabled.
-
-config BR2_PACKAGE_INPUT_TOOLS_INPUTATTACH
-	bool "inputattach moved to linuxconsoletools"
-	select BR2_LEGACY
-	select BR2_PACKAGE_LINUXCONSOLETOOLS
-	select BR2_PACKAGE_LINUXCONSOLETOOLS_INPUTATTACH
-	help
-	  input-tools has been removed, inputattach is now part
-	  of linuxconsoletools, which has automatically been
-	  enabled.
-
-config BR2_PACKAGE_INPUT_TOOLS_JSCAL
-	bool "jscal moved to linuxconsoletools"
-	select BR2_LEGACY
-	select BR2_PACKAGE_LINUXCONSOLETOOLS
-	select BR2_PACKAGE_LINUXCONSOLETOOLS_JOYSTICK
-	help
-	  input-tools has been removed, jscal is now part
-	  of linuxconsoletools, which has automatically been
-	  enabled.
-
-config BR2_PACKAGE_INPUT_TOOLS_JSTEST
-	bool "jstest moved to linuxconsoletools"
-	select BR2_LEGACY
-	select BR2_PACKAGE_LINUXCONSOLETOOLS
-	select BR2_PACKAGE_LINUXCONSOLETOOLS_JOYSTICK
-	help
-	  input-tools has been removed, jstest is now part
-	  of linuxconsoletools, which has automatically been
-	  enabled.
-
-config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH
-	bool "SH Sourcery toolchain has been removed"
-	select BR2_LEGACY
-	help
-	  The Sourcery CodeBench toolchain for the sh architecture has
-	  been removed, since it uses glibc older than 2.17 that requires
-	  -lrt to link executables using clock_* system calls. This makes
-	  this toolchain difficult to maintain over time.
-
-config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86
-	bool "x86 Sourcery toolchain has been removed"
-	select BR2_LEGACY
-	help
-	  The Sourcery CodeBench toolchain for the x86 architecture has
-	  been removed, since it uses glibc older than 2.17 that requires
-	  -lrt to link executables using clock_* system calls. This makes
-	  this toolchain difficult to maintain over time.
-
-config BR2_GCC_VERSION_4_8_X
-	bool "gcc 4.8.x support removed"
-	select BR2_LEGACY
-	help
-	  Support for gcc version 4.8.x has been removed. The current
-	  default version (5.x or later) has been selected instead.
-
-###############################################################################
-comment "Legacy options removed in 2017.05"
-
-config BR2_PACKAGE_SUNXI_MALI_R2P4
-	bool "sunxi-mali r2p4 removed"
-	select BR2_LEGACY
-	help
-	  sunxi-mali libMali for r2p4 Mali kernel module has been
-	  removed since the libump package only provides libUMP.so.3.
-	  libMali for r2p4 Mali kernel module requires libUMP.so.2.
-
-config BR2_PACKAGE_NODEJS_MODULES_COFFEESCRIPT
-	bool "CoffeeScript option has been removed"
-	select BR2_LEGACY
-	help
-	  The option to enable NodeJS CoffeeScript has been removed.
-	  To continue using it, add "coffee-script" to
-	  BR2_PACKAGE_NODEJS_MODULES_ADDITIONAL.
-
-config BR2_PACKAGE_NODEJS_MODULES_EXPRESS
-	bool "Express web application framework option has been removed"
-	select BR2_LEGACY
-	help
-	  The option to enable the NodeJS Express web application
-	  framework has been removed. To continue using it, add
-	  "express" to BR2_PACKAGE_NODEJS_MODULES_ADDITIONAL.
-
-config BR2_PACKAGE_BLUEZ5_UTILS_GATTTOOL
-	bool "bluez5_utils gatttool install option removed"
-	select BR2_PACKAGE_BLUEZ5_UTILS_DEPRECATED
-	help
-	  The option to install gatttool specifically has been removed.
-	  Since version 5.44 gatttool is in the list of deprecated
-	  tools. The option to build and install deprecated tools has
-	  been automatically enabled.
-
-config BR2_PACKAGE_OPENOCD_FT2XXX
-	bool "openocd ft2232 support has been removed"
-	select BR2_PACKAGE_OPENOCD_FTDI
-	select BR2_LEGACY
-	help
-	  FT2232 support in OpenOCD has been removed, it's replaced by
-	  FDTI support, which has automatically been enabled.
-
-config BR2_PACKAGE_KODI_RTMPDUMP
-	bool "kodi rtmp has been removed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_KODI_INPUTSTREAM_RTMP
-	help
-	  Internal rtmp support was removed from Kodi.
-
-config BR2_PACKAGE_KODI_VISUALISATION_FOUNTAIN
-	bool "kodi-visualisation-fountain has been removed"
-	select BR2_LEGACY
-	help
-	  According to upstream 'the visualization is not currently
-	  in a working shape.'
-
-config BR2_PACKAGE_PORTMAP
-	bool "portmap has been removed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_RPCBIND
-	help
-	  The portmap upstream tarball is removed, no releases since
-	  ten years and latest change in upstream git in 2014.
-	  You should better use rpcbind as a RPC portmapper.
-
-config BR2_BINUTILS_VERSION_2_25_X
-	bool "binutils version 2.25 support removed"
-	select BR2_LEGACY
-	help
-	  Support for binutils version 2.25 has been removed. The
-	  current default version (2.27 or later) has been selected
-	  instead.
-
-config BR2_TOOLCHAIN_BUILDROOT_INET_RPC
-	bool "uclibc RPC support has been removed"
-	select BR2_LEGACY
-	help
-	  uClibc-ng removed internal RPC implementation in 1.0.23. You
-	  should use libtirpc instead.
-
-config BR2_TARGET_ROOTFS_EXT2_EXTRA_BLOCKS
-	int "extra size in blocks has been removed"
-	default 0
-	help
-	  Since the support for auto calculation of the filesystem size has been
-	  removed, this option is now useless and must be 0.
-	  You may want to check that BR2_TARGET_ROOTFS_EXT2_BLOCKS matchs
-	  your needs.
-
-config BR2_TARGET_ROOTFS_EXT2_EXTRA_BLOCKS_WRAP
-	bool
-	default y if BR2_TARGET_ROOTFS_EXT2_EXTRA_BLOCKS != 0
-	select BR2_LEGACY
-
-config BR2_PACKAGE_SYSTEMD_KDBUS
-	bool "systemd-kdbus has been removed"
-	select BR2_LEGACY
-	help
-	  --enable/disable-kdbus configure option has been removed since
-	  systemd-231.
-
-config BR2_PACKAGE_POLARSSL
-	bool "polarssl has been removed"
-	select BR2_LEGACY
-	help
-	  The polarssl crypto library has been removed since the 1.2.x
-	  release branch is no longer maintained. Newer upstream
-	  branches/releases (mbedtls) have API changes so they're not
-	  drop-in replacements.
-
-config BR2_NBD_CLIENT
-	bool "nbd client option was renamed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_NBD_CLIENT
-	help
-	  The nbd client option has been renamed to BR2_PACKAGE_NBD_CLIENT.
-
-config BR2_NBD_SERVER
-	bool "nbd server option was renamed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_NBD_SERVER
-	help
-	  The nbd server option has been renamed to BR2_PACKAGE_NBD_SERVER.
-
-config BR2_PACKAGE_GMOCK
-	bool "gmock merged into gtest package"
-	select BR2_LEGACY
-	select BR2_PACKAGE_GTEST
-	select BR2_PACKAGE_GTEST_GMOCK
-	help
-	  GMock is now a suboption of the GTest package.
-
-config BR2_KERNEL_HEADERS_4_8
-	bool "kernel headers version 4.8.x are no longer supported"
-	select BR2_KERNEL_HEADERS_4_4
-	select BR2_LEGACY
-	help
-	  Version 4.8.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed. As an alternative,
-	  version 4.4.x of the headers have been automatically
-	  selected in your configuration.
-
-config BR2_KERNEL_HEADERS_3_18
-	bool "kernel headers version 3.18.x are no longer supported"
-	select BR2_KERNEL_HEADERS_3_12
-	select BR2_LEGACY
-	help
-	  Version 3.18.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed. As an alternative,
-	  version 3.12.x of the headers have been automatically
-	  selected in your configuration.
-
-config BR2_GLIBC_VERSION_2_22
-	bool "glibc 2.22 removed"
-	select BR2_LEGACY
-	help
-	  Support for glibc version 2.22 has been removed. The current
-	  default version has been selected instead.
-
-###############################################################################
-comment "Legacy options removed in 2017.02"
-
-config BR2_PACKAGE_PERL_DB_FILE
-	bool "perl-db-file removed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_BERKELEYDB
-	select BR2_PACKAGE_PERL
-	help
-	  DB_File can be built as a core Perl module, so the separate
-	  perl-db-file package has been removed.
-
-config BR2_KERNEL_HEADERS_4_7
-	bool "kernel headers version 4.7.x are no longer supported"
-	select BR2_KERNEL_HEADERS_4_4
-	select BR2_LEGACY
-	help
-	  Version 4.7.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed. As an alternative,
-	  version 4.4.x of the headers have been automatically
-	  selected in your configuration.
-
-config BR2_KERNEL_HEADERS_4_6
-	bool "kernel headers version 4.6.x are no longer supported"
-	select BR2_KERNEL_HEADERS_4_4
-	select BR2_LEGACY
-	help
-	  Version 4.6.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed. As an alternative,
-	  version 4.4.x of the headers have been automatically
-	  selected in your configuration.
-
-config BR2_KERNEL_HEADERS_4_5
-	bool "kernel headers version 4.5.x are no longer supported"
-	select BR2_KERNEL_HEADERS_4_4
-	select BR2_LEGACY
-	help
-	  Version 4.5.x of the Linux kernel headers are no longer
-	   maintained upstream and are now removed. As an alternative,
-	   version 4.4.x of the headers have been automatically
-	   selected in your configuration.
-
-config BR2_KERNEL_HEADERS_3_14
-	bool "kernel headers version 3.14.x are no longer supported"
-	select BR2_KERNEL_HEADERS_3_12
-	select BR2_LEGACY
-	  help
-	  Version 3.14.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed. As an alternative,
-	  version 3.12.x of the headers have been automatically
-	  selected in your configuration.
-
-config BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS
-	bool "musl-cross 1.1.12 toolchain removed"
-	select BR2_LEGACY
-	help
-	  The support for the prebuilt toolchain based on the Musl C
-	  library provided by the musl-cross project has been removed.
-	  Upstream doesn't provide any prebuilt toolchain anymore, use the
-	  Buildroot toolchain instead.
-
-config BR2_UCLIBC_INSTALL_TEST_SUITE
-	bool "uClibc tests now in uclibc-ng-test"
-	select BR2_LEGACY
-	select BR2_PACKAGE_UCLIBC_NG_TEST
-	help
-	  The test suite of the uClibc C library has been moved into a
-	  separate package, uclibc-ng-test.
-
-config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX
-	bool "Blackfin.uclinux.org 2014R1 toolchain removed"
-	select BR2_LEGACY
-	help
-	  The ADI Blackfin toolchain has many bugs which are fixed in
-	  more recent gcc and uClibc-ng releases. Use the Buildroot
-	  toolchain instead.
-
-config BR2_PACKAGE_MAKEDEVS
-	bool "makedevs removed"
-	select BR2_LEGACY
-	help
-	  The makedevs tool is part of busybox. The Buildroot fork
-	  should not be used outside of the Buildroot infrastructure.
-
-config BR2_TOOLCHAIN_EXTERNAL_ARAGO_ARMV7A
-	bool "Arago ARMv7 2011.09 removed"
-	select BR2_LEGACY
-	help
-	  The Arago toolchains are every old and not updated anymore.
-
-config BR2_TOOLCHAIN_EXTERNAL_ARAGO_ARMV5TE
-	bool "Arago ARMv5 2011.09 removed"
-	select BR2_LEGACY
-	help
-	  The Arago toolchains are every old and not updated anymore.
-
-config BR2_PACKAGE_SNOWBALL_HDMISERVICE
-	bool "snowball-hdmiservice removed"
-	select BR2_LEGACY
-	help
-	  We no longer have support for the Snowball platform in
-	  Buildroot, so this package was no longer useful.
-
-config BR2_PACKAGE_SNOWBALL_INIT
-	bool "snowball-init removed"
-	select BR2_LEGACY
-	help
-	  We no longer have support for the Snowball platform in
-	  Buildroot, so this package was no longer useful.
-
-config BR2_GDB_VERSION_7_9
-	bool "gdb 7.9 has been removed"
-	select BR2_LEGACY
-	help
-	  The 7.9 version of gdb has been removed. Use a newer version
-	  instead.
-
-###############################################################################
-comment "Legacy options removed in 2016.11"
-
-config BR2_PACKAGE_PHP_SAPI_CLI_CGI
-	bool "PHP CGI and CLI options are now seperate"
-	select BR2_PACKAGE_PHP_SAPI_CLI
-	select BR2_PACKAGE_PHP_SAPI_CGI
-	select BR2_LEGACY
-	help
-	  The PHP Interface options have been split up into a
-	  separate option for each interface.
-
-config BR2_PACKAGE_PHP_SAPI_CLI_FPM
-	bool "PHP CLI and FPM options are now separate"
-	select BR2_PACKAGE_PHP_SAPI_CLI
-	select BR2_PACKAGE_PHP_SAPI_FPM
-	select BR2_LEGACY
-	help
-	  The PHP Interface options have been split up into a
-	  separate option for each interface.
-
-config BR2_PACKAGE_WVSTREAMS
-	bool "wvstreams removed"
-	select BR2_LEGACY
-	help
-	  wvstreams is not maintained anymore since about 2009. It also
-	  doesn't build anymore with recent compilers (GCC 5+).
-
-config BR2_PACKAGE_WVDIAL
-	bool "wvdial removed"
-	select BR2_LEGACY
-	help
-	  wvdial is not maintained anymore since about 2009. It also
-	  doesn't build anymore with recent compilers (GCC 5+).
-
-config BR2_PACKAGE_WEBKITGTK24
-	bool "webkitgtk 2.4.x removed"
-	select BR2_LEGACY
-	help
-	  This legacy package only existed because some other packages
-	  depended on that specific version of webkitgtk. However, the
-	  other packages have been fixed. webkitgtk 2.4 is full of
-	  security issues so it needs to be removed.
-
-config BR2_PACKAGE_TORSMO
-	bool "torsmo removed"
-	select BR2_LEGACY
-	help
-	  torsmo has been unmaintained for a long time, and nobody
-	  seems to be interested in it.
-
-config BR2_PACKAGE_SSTRIP
-	bool "sstrip removed"
-	select BR2_LEGACY
-	help
-	  sstrip is unmaintained and potentially harmful. It doesn't
-	  save so much compared to normal binutils strip, and there is
-	  a big risk of binaries that don't work. Use normal strip
-	  instead.
-
-config BR2_KERNEL_HEADERS_4_3
-	bool "kernel headers version 4.3.x are no longer supported"
-	select BR2_KERNEL_HEADERS_4_1
-	select BR2_LEGACY
-	help
-	  Version 4.3.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed. As an alternative,
-	  version 4.1.x of the headers have been automatically
-	  selected in your configuration.
-
-config BR2_KERNEL_HEADERS_4_2
-	bool "kernel headers version 4.2.x are no longer supported"
-	select BR2_KERNEL_HEADERS_4_1
-	select BR2_LEGACY
-	help
-	  Version 4.2.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed. As an alternative,
-	  version 4.1.x of the headers have been automatically
-	  selected in your configuration.
-
-config BR2_PACKAGE_KODI_ADDON_XVDR
-	bool "kodi-addon-xvdr removed"
-	select BR2_LEGACY
-	help
-	  According to the github project page:
-	  https://github.com/pipelka/xbmc-addon-xvdr
-	  this package is discontinued.
-
-config BR2_PACKAGE_IPKG
-	bool "ipkg removed"
-	select BR2_LEGACY
-	help
-	  ipkg dates back to the early 2000s when Compaq started the
-	  handhelds.org project and it hasn't seen development since 2006.
-	  Use opkg as a replacement.
-
-config BR2_GCC_VERSION_4_7_X
-	bool "gcc 4.7.x support removed"
-	select BR2_LEGACY
-	help
-	  Support for gcc version 4.7.x has been removed. The current
-	  default version (4.9.x or later) has been selected instead.
-
-config BR2_BINUTILS_VERSION_2_24_X
-	bool "binutils version 2.24 support removed"
-	select BR2_LEGACY
-	help
-	  Support for binutils version 2.24 has been removed. The
-	  current default version (2.26 or later) has been selected
-	  instead.
-
-config BR2_PACKAGE_WESTON_RPI
-	bool "Weston propietary RPI support is gone"
-	select BR2_LEGACY
-	help
-	  Upstream decided the propietary (rpi-userland) weston composer
-	  support wasn't worth the effort so it was removed. Switch to
-	  the open VC4 support.
-
-config BR2_LINUX_KERNEL_TOOL_CPUPOWER
-	bool "linux-tool cpupower"
-	depends on BR2_LINUX_KERNEL
-	select BR2_LEGACY
-	select BR2_PACKAGE_LINUX_TOOLS_CPUPOWER
-	help
-	  Linux tool cpupower option was renamed.
-
-config BR2_LINUX_KERNEL_TOOL_PERF
-	bool "linux-tool perf"
-	depends on BR2_LINUX_KERNEL
-	select BR2_LEGACY
-	select BR2_PACKAGE_LINUX_TOOLS_PERF
-	help
-	  Linux tool perf option was renamed.
-
-config BR2_LINUX_KERNEL_TOOL_SELFTESTS
-	bool "linux-tool selftests"
-	depends on BR2_LINUX_KERNEL
-	select BR2_LEGACY
-	select BR2_PACKAGE_LINUX_TOOLS_SELFTESTS
-	help
-	  Linux tool selftests option was renamed.
-
-config BR2_GCC_VERSION_4_8_ARC
-	bool "gcc arc option renamed"
-	select BR2_LEGACY
-	select BR2_GCC_VERSION_ARC
-	help
-	  The option that selects the gcc version for the ARC
-	  architecture has been renamed to BR2_GCC_VERSION_ARC.
-
-config BR2_KERNEL_HEADERS_4_0
-	bool "kernel headers version 4.0.x are no longer supported"
-	select BR2_KERNEL_HEADERS_3_12
-	select BR2_LEGACY
-	help
-	  Version 4.0.x of the Linux kernel headers have been deprecated
-	  for more than four buildroot releases and are now removed.
-	  As an alternative, version 3.12.x of the headers have been
-	  automatically selected in your configuration.
-
-config BR2_KERNEL_HEADERS_3_19
-	bool "kernel headers version 3.19.x are no longer supported"
-	select BR2_KERNEL_HEADERS_3_12
-	select BR2_LEGACY
-	help
-	  Version 3.19.x of the Linux kernel headers have been deprecated
-	  for more than four buildroot releases and are now removed.
-	  As an alternative, version 3.12.x of the headers have been
-	  automatically selected in your configuration.
-
-config BR2_PACKAGE_LIBEVAS_GENERIC_LOADERS
-	bool "libevas-generic-loaders package removed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_EFL
-	help
-	  With EFL 1.18, libevas-generic-loaders is now provided by the efl
-	  package.
-
-config BR2_PACKAGE_ELEMENTARY
-	bool "elementary package removed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_EFL
-	help
-	  With EFL 1.18, elementary is now provided by the efl package.
-
-config BR2_LINUX_KERNEL_CUSTOM_LOCAL
-	bool "Linux kernel local directory option removed"
-	help
-	  The option to select a local directory as the source of the Linux
-	  kernel has been removed. It hurts reproducibility of builds.
-
-	  In case you were using this option during development of your
-	  Linux kernel, use the override mechanism instead.
-
 ###############################################################################
 comment "Legacy options removed in 2016.08"
 
-config BR2_PACKAGE_EFL_JP2K
-	bool "libevas jp2k loader has been removed"
-	select BR2_LEGACY
-	help
-	  JP2K support in EFL requires openjpeg 1.x (libopenjpeg1.pc)
-	  while Buildroot only packages openjpeg 2.x. Therefore, the
-	  JP2K loader has been removed from EFL.
-
 config BR2_PACKAGE_SYSTEMD_COMPAT
 	bool "systemd compatibility libraries have been removed"
 	select BR2_LEGACY
@@ -1040,19 +304,12 @@ config BR2_PACKAGE_QT5QUICK1
 	  from upstream starting from Qt 5.6.
 
 config BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR
-	string "uboot custom patch dir has been removed"
+	bool "uboot custom patch dir removed"
+	select BR2_LEGACY
 	help
 	  The uboot custom patch directory option has been removed. Use
 	  the improved BR2_TARGET_UBOOT_PATCH option instead.
 
-config BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR_WRAP
-	bool
-	default y if BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR != ""
-	select BR2_LEGACY
-
-# Note: BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR is still referenced from
-# boot/uboot/Config.in
-
 config BR2_PACKAGE_XDRIVER_XF86_INPUT_VOID
 	bool "xf86-input-void removed"
 	select BR2_LEGACY
@@ -1062,12 +319,12 @@ config BR2_PACKAGE_XDRIVER_XF86_INPUT_VOID
 
 config BR2_KERNEL_HEADERS_3_17
 	bool "kernel headers version 3.17.x are no longer supported"
-	select BR2_KERNEL_HEADERS_3_12
+	select BR2_KERNEL_HEADERS_3_18
 	select BR2_LEGACY
 	help
 	  Version 3.17.x of the Linux kernel headers have been deprecated
 	  for more than four buildroot releases and are now removed.
-	  As an alternative, version 3.12.x of the headers have been
+	  As an alternative, version 3.18.x of the headers have been
 	  automatically selected in your configuration.
 
 config BR2_GDB_VERSION_7_7
@@ -1129,7 +386,7 @@ config BR2_GCC_VERSION_4_5_X
 	  version instead.
 
 config BR2_PACKAGE_SQLITE_READLINE
-	bool "sqlite command-line editing support was updated"
+	bool "command-line editing support was updated"
 	select BR2_PACKAGE_NCURSES
 	select BR2_PACKAGE_READLINE
 	select BR2_LEGACY
@@ -1163,7 +420,7 @@ config BR2_PACKAGE_E2FSPROGS_FINDFS
 	  This option attempted to enable findfs capabilities from
 	  e2fsprogs but has not worked since July 2015 (due to
 	  packaging changes). One can use BusyBox's findfs support or
-	  enable the BR2_PACKAGE_UTIL_LINUX_BINARIES option.
+	  enable the BR2_PACKAGE_UTIL_LINUX_FINDFS option.
 
 config BR2_PACKAGE_OPENPOWERLINK_DEBUG_LEVEL
 	bool "openpowerlink debug option has been removed"
@@ -1208,12 +465,12 @@ config BR2_PACKAGE_CUPS_PDFTOPS
 
 config BR2_KERNEL_HEADERS_3_16
 	bool "kernel headers version 3.16.x are no longer supported"
-	select BR2_KERNEL_HEADERS_3_12
+	select BR2_KERNEL_HEADERS_3_18
 	select BR2_LEGACY
 	help
 	Version 3.16.x of the Linux kernel headers have been deprecated
 	for more than four buildroot releases and are now removed.
-	As an alternative, version 3.12.x of the headers have been
+	As an alternative, version 3.18.x of the headers have been
 	automatically selected in your configuration.
 
 config BR2_PACKAGE_PYTHON_PYXML
@@ -1424,32 +681,32 @@ config BR2_KERNEL_HEADERS_3_0
 
 config BR2_KERNEL_HEADERS_3_11
 	bool "kernel headers version 3.11.x are no longer supported"
-	select BR2_KERNEL_HEADERS_3_10
+	select BR2_KERNEL_HEADERS_3_12
 	select BR2_LEGACY
 	help
 	  Version 3.11.x of the Linux kernel headers have been deprecated
 	  for more than four buildroot releases and are now removed.
-	  As an alternative, version 3.10.x of the headers have been
+	  As an alternative, version 3.12.x of the headers have been
 	  automatically selected in your configuration.
 
 config BR2_KERNEL_HEADERS_3_13
 	bool "kernel headers version 3.13.x are no longer supported"
-	select BR2_KERNEL_HEADERS_3_12
+	select BR2_KERNEL_HEADERS_3_14
 	select BR2_LEGACY
 	help
 	  Version 3.13.x of the Linux kernel headers have been deprecated
 	  for more than four buildroot releases and are now removed.
-	  As an alternative, version 3.12.x of the headers have been
+	  As an alternative, version 3.14.x of the headers have been
 	  automatically selected in your configuration.
 
 config BR2_KERNEL_HEADERS_3_15
 	bool "kernel headers version 3.15.x are no longer supported"
-	select BR2_KERNEL_HEADERS_3_12
+	select BR2_KERNEL_HEADERS_3_18
 	select BR2_LEGACY
 	help
 	  Version 3.15.x of the Linux kernel headers have been deprecated
 	  for more than four buildroot releases and are now removed.
-	  As an alternative, version 3.12.x of the headers have been
+	  As an alternative, version 3.18.x of the headers have been
 	  automatically selected in your configuration.
 
 config BR2_PACKAGE_DIRECTFB_EXAMPLES_ANDI
@@ -1999,12 +1256,11 @@ config BR2_PACKAGE_STRONGSWAN_TOOLS
 	  deprecated.
 
 config BR2_PACKAGE_XBMC_ADDON_XVDR
-	bool "xbmc-addon-xvdr removed"
+	bool "xbmc options have been renamed"
 	select BR2_LEGACY
+	select BR2_PACKAGE_KODI_ADDON_XVDR
 	help
-	  According to the github project page:
-	  https://github.com/pipelka/xbmc-addon-xvdr
-	  this package is discontinued.
+	  The XBMC media center project was renamed to Kodi entertainment center
 
 config BR2_PACKAGE_XBMC_PVR_ADDONS
 	bool "xbmc options have been renamed"
@@ -2256,12 +1512,12 @@ config BR2_PACKAGE_LIBELF
 
 config BR2_KERNEL_HEADERS_3_8
 	bool "kernel headers version 3.8.x are no longer supported"
-	select BR2_KERNEL_HEADERS_3_4
+	select BR2_KERNEL_HEADERS_3_10
 	select BR2_LEGACY
 	help
 	  Version 3.8.x of the Linux kernel headers have been deprecated
 	  for more than four buildroot releases and are now removed.
-	  As an alternative, version 3.4.x of the headers have been
+	  As an alternative, version 3.10.x of the headers have been
 	  automatically selected in your configuration.
 
 config BR2_PACKAGE_GETTEXT_TOOLS
@@ -2414,22 +1670,22 @@ config BR2_PACKAGE_EVTEST_CAPTURE
 
 config BR2_KERNEL_HEADERS_3_6
 	bool "kernel headers version 3.6.x are no longer supported"
-	select BR2_KERNEL_HEADERS_3_4
+	select BR2_KERNEL_HEADERS_3_10
 	select BR2_LEGACY
 	help
 	  Version 3.6.x of the Linux kernel headers have been deprecated
 	  for more than four buildroot releases and are now removed.
-	  As an alternative, version 3.4.x of the headers have been
+	  As an alternative, version 3.10.x of the headers have been
 	  automatically selected in your configuration.
 
 config BR2_KERNEL_HEADERS_3_7
 	bool "kernel headers version 3.7.x are no longer supported"
-	select BR2_KERNEL_HEADERS_3_4
+	select BR2_KERNEL_HEADERS_3_10
 	select BR2_LEGACY
 	help
 	  Version 3.7.x of the Linux kernel headers have been deprecated
 	  for more than four buildroot releases and are now removed.
-	  As an alternative, version 3.4.x of the headers have been
+	  As an alternative, version 3.10.x of the headers have been
 	  automatically selected in your configuration.
 
 config BR2_PACKAGE_VALA
@@ -2602,22 +1858,22 @@ config BR2_KERNEL_HEADERS_3_1
 
 config BR2_KERNEL_HEADERS_3_3
 	bool "kernel headers version 3.3.x are no longer supported"
-	select BR2_KERNEL_HEADERS_3_2
+	select BR2_KERNEL_HEADERS_3_4
 	select BR2_LEGACY
 	help
 	  Version 3.3.x of the Linux kernel headers have been deprecated
 	  for more than four buildroot releases and are now removed.
-	  As an alternative, version 3.2.x of the headers have been
+	  As an alternative, version 3.4.x of the headers have been
 	  automatically selected in your configuration.
 
 config BR2_KERNEL_HEADERS_3_5
 	bool "kernel headers version 3.5.x are no longer supported"
-	select BR2_KERNEL_HEADERS_3_4
+	select BR2_KERNEL_HEADERS_3_10
 	select BR2_LEGACY
 	help
 	  Version 3.5.x of the Linux kernel headers have been deprecated
 	  for more than four buildroot releases and are now removed.
-	  As an alternative, version 3.4.x of the headers have been
+	  As an alternative, version 3.10.x of the headers have been
 	  automatically selected in your configuration.
 
 config BR2_GDB_VERSION_7_2

Makefile

@@ -2,7 +2,7 @@
 #
 # Copyright (C) 1999-2005 by Erik Andersen <andersen@codepoet.org>
 # Copyright (C) 2006-2014 by the Buildroot developers <buildroot@uclibc.org>
-# Copyright (C) 2014-2017 by the Buildroot developers <buildroot@buildroot.org>
+# Copyright (C) 2014-2016 by the Buildroot developers <buildroot@buildroot.org>
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -24,72 +24,29 @@
 # You shouldn't need to mess with anything beyond this point...
 #--------------------------------------------------------------
 
-# Delete default rules. We don't use them. This saves a bit of time.
-.SUFFIXES:
-
 # we want bash as shell
 SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
 	 else if [ -x /bin/bash ]; then echo /bin/bash; \
 	 else echo sh; fi; fi)
 
-# Set O variable if not already done on the command line;
-# or avoid confusing packages that can use the O=<dir> syntax for out-of-tree
-# build by preventing it from being forwarded to sub-make calls.
-ifneq ("$(origin O)", "command line")
-O := $(CURDIR)/output
-endif
-
-# Check if the current Buildroot execution meets all the pre-requisites.
-# If they are not met, Buildroot will actually do its job in a sub-make meeting
-# its pre-requisites, which are:
-#  1- Permissive enough umask:
-#       Wrong or too restrictive umask will prevent Buildroot and packages from
-#       creating files and directories.
-#  2- Absolute canonical CWD (i.e. $(CURDIR)):
-#       Otherwise, some packages will use CWD as-is, others will compute its
-#       absolute canonical path. This makes harder tracking and fixing host
-#       machine path leaks.
-#  3- Absolute canonical output location (i.e. $(O)):
-#       For the same reason as the one for CWD.
-
-# Remove the trailing '/.' from $(O) as it can be added by the makefile wrapper
-# installed in the $(O) directory.
-# Also remove the trailing '/' the user can set when on the command line.
-override O := $(patsubst %/,%,$(patsubst %.,%,$(O)))
-# Make sure $(O) actually exists before calling realpath on it; this is to
-# avoid empty CANONICAL_O in case on non-existing entry.
-CANONICAL_O := $(shell mkdir -p $(O) >/dev/null 2>&1)$(realpath $(O))
-
-CANONICAL_CURDIR = $(realpath $(CURDIR))
-
-REQ_UMASK = 0022
-
-# Make sure O= is passed (with its absolute canonical path) everywhere the
-# toplevel makefile is called back.
-EXTRAMAKEARGS := O=$(CANONICAL_O)
-
-# Check Buildroot execution pre-requisites here.
-ifneq ($(shell umask):$(CURDIR):$(O),$(REQ_UMASK):$(CANONICAL_CURDIR):$(CANONICAL_O))
+# Trick for always running with a fixed umask
+UMASK = 0022
+ifneq ($(shell umask),$(UMASK))
 .PHONY: _all $(MAKECMDGOALS)
 
 $(MAKECMDGOALS): _all
 	@:
 
 _all:
-	@umask $(REQ_UMASK) && \
-		$(MAKE) -C $(CANONICAL_CURDIR) --no-print-directory \
-			$(MAKECMDGOALS) $(EXTRAMAKEARGS)
+	@umask $(UMASK) && $(MAKE) --no-print-directory $(MAKECMDGOALS)
 
-else # umask / $(CURDIR) / $(O)
+else # umask
 
 # This is our default rule, so must come first
 all:
-.PHONY: all
 
 # Set and export the version string
-export BR2_VERSION := 2017.08
-# Actual time the release is cut (for reproducible builds)
-BR2_VERSION_EPOCH = 1504300000
+export BR2_VERSION := 2016.08.1
 
 # Save running make version since it's clobbered by the make package
 RUNNING_MAKE_VERSION := $(MAKE_VERSION)
@@ -126,11 +83,10 @@ DATE := $(shell date +%Y%m%d)
 # Need to export it, so it can be got from environment in children (eg. mconf)
 export BR2_VERSION_FULL := $(BR2_VERSION)$(shell $(TOPDIR)/support/scripts/setlocalversion)
 
-# List of targets and target patterns for which .config doesn't need to be read in
 noconfig_targets := menuconfig nconfig gconfig xconfig config oldconfig randconfig \
-	defconfig %_defconfig allyesconfig allnoconfig alldefconfig silentoldconfig release \
+	defconfig %_defconfig allyesconfig allnoconfig silentoldconfig release \
 	randpackageconfig allyespackageconfig allnopackageconfig \
-	print-version olddefconfig distclean manual manual-%
+	print-version olddefconfig
 
 # Some global targets do not trigger a build, but are used to collect
 # metadata, or do various checks. When such targets are triggered,
@@ -141,63 +97,80 @@ noconfig_targets := menuconfig nconfig gconfig xconfig config oldconfig randconf
 # We're building in two situations: when MAKECMDGOALS is empty
 # (default target is to build), or when MAKECMDGOALS contains
 # something else than one of the nobuild_targets.
-nobuild_targets := source %-source source-check \
-	legal-info %-legal-info external-deps _external-deps \
-	clean distclean help show-targets graph-depends \
-	%-graph-depends %-show-depends %-show-version \
-	graph-build graph-size list-defconfigs \
-	savedefconfig printvars
+nobuild_targets := source source-check \
+	legal-info external-deps _external-deps \
+	clean distclean help
 ifeq ($(MAKECMDGOALS),)
 BR_BUILDING = y
 else ifneq ($(filter-out $(nobuild_targets),$(MAKECMDGOALS)),)
 BR_BUILDING = y
 endif
 
-# We call make recursively to build packages. The command-line overrides that
-# are passed to Buildroot don't apply to those package build systems. In
-# particular, we don't want to pass down the O=<dir> option for out-of-tree
-# builds, because the value specified on the command line will not be correct
-# for packages.
-MAKEOVERRIDES :=
+# Strip quotes and then whitespaces
+qstrip = $(strip $(subst ",,$(1)))
+#"))
 
-# Include some helper macros and variables
-include support/misc/utils.mk
+# Variables for use in Make constructs
+comma := ,
+empty :=
+space := $(empty) $(empty)
 
-# Set variables related to in-tree or out-of-tree build.
-# Here, both $(O) and $(CURDIR) are absolute canonical paths.
-ifeq ($(O),$(CURDIR)/output)
-CONFIG_DIR := $(CURDIR)
+ifneq ("$(origin O)", "command line")
+O := output
+CONFIG_DIR := $(TOPDIR)
 NEED_WRAPPER =
 else
+# other packages might also support Linux-style out of tree builds
+# with the O=<dir> syntax (E.G. BusyBox does). As make automatically
+# forwards command line variable definitions those packages get very
+# confused. Fix this by telling make to not do so
+MAKEOVERRIDES =
+# strangely enough O is still passed to submakes with MAKEOVERRIDES
+# (with make 3.81 atleast), the only thing that changes is the output
+# of the origin function (command line -> environment).
+# Unfortunately some packages don't look at origin (E.G. uClibc 0.9.31+)
+# To really make O go away, we have to override it.
+override O := $(O)
 CONFIG_DIR := $(O)
+# we need to pass O= everywhere we call back into the toplevel makefile
+EXTRAMAKEARGS = O=$(O)
 NEED_WRAPPER = y
 endif
 
 # bash prints the name of the directory on 'cd <dir>' if CDPATH is
 # set, so unset it here to not cause problems. Notice that the export
-# line doesn't affect the environment of $(shell ..) calls.
+# line doesn't affect the environment of $(shell ..) calls, so
+# explictly throw away any output from 'cd' here.
 export CDPATH :=
-
-BASE_DIR := $(CANONICAL_O)
+BASE_DIR := $(shell mkdir -p $(O) && cd $(O) >/dev/null && pwd)
 $(if $(BASE_DIR),, $(error output directory "$(O)" does not exist))
 
 
 # Handling of BR2_EXTERNAL.
 #
 # The value of BR2_EXTERNAL is stored in .br-external in the output directory.
-# The location of the external.mk makefile fragments is computed in that file.
-# On subsequent invocations of make, this file is read in. BR2_EXTERNAL can
-# still be overridden on the command line, therefore the file is re-created
-# every time make is run.
+# On subsequent invocations of make, it is read in. It can still be overridden
+# on the command line, therefore the file is re-created every time make is run.
+#
+# When BR2_EXTERNAL is set to an empty value (e.g. explicitly in command
+# line), the .br-external file is removed and we point to
+# support/dummy-external. This makes sure we can unconditionally include the
+# Config.in and external.mk from the BR2_EXTERNAL directory. In this case,
+# override is necessary so the user can clear BR2_EXTERNAL from the command
+# line, but the dummy path is still used internally.
 
-BR2_EXTERNAL_FILE = $(BASE_DIR)/.br-external.mk
+BR2_EXTERNAL_FILE = $(BASE_DIR)/.br-external
 -include $(BR2_EXTERNAL_FILE)
-$(shell support/scripts/br2-external \
-	-m -o '$(BR2_EXTERNAL_FILE)' $(BR2_EXTERNAL))
-BR2_EXTERNAL_ERROR =
-include $(BR2_EXTERNAL_FILE)
-ifneq ($(BR2_EXTERNAL_ERROR),)
-$(error $(BR2_EXTERNAL_ERROR))
+ifeq ($(BR2_EXTERNAL),)
+  override BR2_EXTERNAL = support/dummy-external
+  $(shell rm -f $(BR2_EXTERNAL_FILE))
+else
+  _BR2_EXTERNAL = $(shell cd $(BR2_EXTERNAL) >/dev/null 2>&1 && pwd)
+  ifeq ($(_BR2_EXTERNAL),)
+    $(error BR2_EXTERNAL='$(BR2_EXTERNAL)' does not exist, relative to $(TOPDIR))
+  endif
+  override BR2_EXTERNAL := $(_BR2_EXTERNAL)
+  $(shell echo BR2_EXTERNAL ?= $(BR2_EXTERNAL) > $(BR2_EXTERNAL_FILE))
 endif
 
 # To make sure that the environment variable overrides the .config option,
@@ -228,18 +201,11 @@ LICENSE_FILES_DIR_TARGET = $(LEGAL_INFO_DIR)/licenses
 LICENSE_FILES_DIR_HOST = $(LEGAL_INFO_DIR)/host-licenses
 LEGAL_MANIFEST_CSV_TARGET = $(LEGAL_INFO_DIR)/manifest.csv
 LEGAL_MANIFEST_CSV_HOST = $(LEGAL_INFO_DIR)/host-manifest.csv
+LEGAL_LICENSES_TXT_TARGET = $(LEGAL_INFO_DIR)/licenses.txt
+LEGAL_LICENSES_TXT_HOST = $(LEGAL_INFO_DIR)/host-licenses.txt
 LEGAL_WARNINGS = $(LEGAL_INFO_DIR)/.warnings
 LEGAL_REPORT = $(LEGAL_INFO_DIR)/README
 
-################################################################################
-#
-# staging and target directories do NOT list these as
-# dependencies anywhere else
-#
-################################################################################
-$(BUILD_DIR) $(TARGET_DIR) $(HOST_DIR) $(BINARIES_DIR) $(LEGAL_INFO_DIR) $(REDIST_SOURCES_DIR_TARGET) $(REDIST_SOURCES_DIR_HOST):
-	@mkdir -p $@
-
 BR2_CONFIG = $(CONFIG_DIR)/.config
 
 # Pull in the user's configuration file
@@ -249,13 +215,9 @@ endif
 
 # timezone and locale may affect build output
 ifeq ($(BR2_REPRODUCIBLE),y)
-export TZ = UTC
-export LANG = C
-export LC_ALL = C
-export GZIP = -n
-BR2_VERSION_GIT_EPOCH = $(shell GIT_DIR=$(TOPDIR)/.git $(GIT) log -1 --format=%at)
-export SOURCE_DATE_EPOCH = $(if $(wildcard $(TOPDIR)/.git),$(BR2_VERSION_GIT_EPOCH),$(BR2_VERSION_EPOCH))
-DEPENDENCIES_HOST_PREREQ += host-fakedate
+export TZ=UTC
+export LANG=C
+export LC_ALL=C
 endif
 
 # To put more focus on warnings, be less verbose as default
@@ -324,7 +286,6 @@ HOSTLN := $(shell which $(HOSTLN) || type -p $(HOSTLN) || echo ln)
 HOSTNM := $(shell which $(HOSTNM) || type -p $(HOSTNM) || echo nm)
 HOSTOBJCOPY := $(shell which $(HOSTOBJCOPY) || type -p $(HOSTOBJCOPY) || echo objcopy)
 HOSTRANLIB := $(shell which $(HOSTRANLIB) || type -p $(HOSTRANLIB) || echo ranlib)
-SED := $(shell which sed || type -p sed) -i -e
 
 export HOSTAR HOSTAS HOSTCC HOSTCXX HOSTLD
 export HOSTCC_NOCCACHE HOSTCXX_NOCCACHE
@@ -403,7 +364,6 @@ unexport QMAKESPEC
 unexport TERMINFO
 unexport MACHINE
 unexport O
-unexport GCC_COLORS
 
 GNU_HOST_NAME := $(shell support/gnuconfig/config.guess)
 
@@ -423,7 +383,6 @@ KERNEL_ARCH := $(shell echo "$(ARCH)" | sed -e "s/-.*//" \
 	-e s/arm.*/arm/ -e s/sa110/arm/ \
 	-e s/aarch64.*/arm64/ \
 	-e s/bfin/blackfin/ \
-	-e s/or1k/openrisc/ \
 	-e s/parisc64/parisc/ \
 	-e s/powerpc64.*/powerpc/ \
 	-e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
@@ -433,21 +392,20 @@ KERNEL_ARCH := $(shell echo "$(ARCH)" | sed -e "s/-.*//" \
 ZCAT := $(call qstrip,$(BR2_ZCAT))
 BZCAT := $(call qstrip,$(BR2_BZCAT))
 XZCAT := $(call qstrip,$(BR2_XZCAT))
-LZCAT := $(call qstrip,$(BR2_LZCAT))
 TAR_OPTIONS = $(call qstrip,$(BR2_TAR_OPTIONS)) -xf
 
 # packages compiled for the host go here
 HOST_DIR := $(call qstrip,$(BR2_HOST_DIR))
 
 # Quotes are needed for spaces and all in the original PATH content.
-BR_PATH = "$(HOST_DIR)/bin:$(HOST_DIR)/sbin:$(PATH)"
+BR_PATH = "$(HOST_DIR)/bin:$(HOST_DIR)/sbin:$(HOST_DIR)/usr/bin:$(HOST_DIR)/usr/sbin:$(PATH)"
 
 # Location of a file giving a big fat warning that output/target
 # should not be used as the root filesystem.
 TARGET_DIR_WARNING_FILE = $(TARGET_DIR)/THIS_IS_NOT_YOUR_ROOT_FILESYSTEM
 
 ifeq ($(BR2_CCACHE),y)
-CCACHE := $(HOST_DIR)/bin/ccache
+CCACHE := $(HOST_DIR)/usr/bin/ccache
 BR_CACHE_DIR ?= $(call qstrip,$(BR2_CCACHE_DIR))
 export BR_CACHE_DIR
 HOSTCC := $(CCACHE) $(HOSTCC)
@@ -477,13 +435,11 @@ all: world
 
 # Include legacy before the other things, because package .mk files
 # may rely on it.
+ifneq ($(BR2_DEPRECATED),y)
 include Makefile.legacy
+endif
 
-include system/system.mk
 include package/Makefile.in
-# arch/arch.mk.* must be after package/Makefile.in because it may need to
-# complement variables defined therein, like BR_NO_CHECK_HASH_FOR.
--include $(wildcard arch/arch.mk.*)
 include support/dependencies/dependencies.mk
 
 include toolchain/*.mk
@@ -502,15 +458,7 @@ include boot/common.mk
 include linux/linux.mk
 include fs/common.mk
 
-# If using a br2-external tree, the BR2_EXTERNAL_$(NAME)_PATH variables
-# are also present in the .config file. Since .config is included after
-# we defined them in the Makefile, the values for those variables are
-# quoted. We just include the generated Makefile fragment .br2-external.mk
-# a third time, which will set those variables to the un-quoted values.
-include $(BR2_EXTERNAL_FILE)
-
-# Nothing to include if no BR2_EXTERNAL tree in use
-include $(BR2_EXTERNAL_MKS)
+include $(BR2_EXTERNAL)/external.mk
 
 # Now we are sure we have all the packages scanned and defined. We now
 # check for each package in the list of enabled packages, that all its
@@ -540,30 +488,28 @@ $(foreach pkg,$(call UPPERCASE,$(PACKAGES)),\
 
 endif
 
-.PHONY: dirs
 dirs: $(BUILD_DIR) $(STAGING_DIR) $(TARGET_DIR) \
-	$(HOST_DIR) $(HOST_DIR)/usr $(BINARIES_DIR)
+	$(HOST_DIR) $(BINARIES_DIR)
 
 $(BUILD_DIR)/buildroot-config/auto.conf: $(BR2_CONFIG)
 	$(MAKE1) $(EXTRAMAKEARGS) HOSTCC="$(HOSTCC_NOCCACHE)" HOSTCXX="$(HOSTCXX_NOCCACHE)" silentoldconfig
 
-.PHONY: prepare
 prepare: $(BUILD_DIR)/buildroot-config/auto.conf
 
-.PHONY: world
 world: target-post-image
 
-.PHONY: sdk
-sdk: world
-	@$(call MESSAGE,"Rendering the SDK relocatable")
-	$(TOPDIR)/support/scripts/fix-rpath host
-	$(TOPDIR)/support/scripts/fix-rpath staging
-	$(INSTALL) -m 755 $(TOPDIR)/support/misc/relocate-sdk.sh $(HOST_DIR)/relocate-sdk.sh
-	echo $(HOST_DIR) > $(HOST_DIR)/share/buildroot/sdk-location
+.PHONY: all world toolchain dirs clean distclean source outputmakefile \
+	legal-info legal-info-prepare legal-info-clean printvars help \
+	list-defconfigs target-finalize target-post-image source-check
 
-# Compatibility symlink in case a post-build script still uses $(HOST_DIR)/usr
-$(HOST_DIR)/usr: $(HOST_DIR)
-	@ln -snf . $@
+################################################################################
+#
+# staging and target directories do NOT list these as
+# dependencies anywhere else
+#
+################################################################################
+$(BUILD_DIR) $(TARGET_DIR) $(HOST_DIR) $(BINARIES_DIR) $(LEGAL_INFO_DIR) $(REDIST_SOURCES_DIR_TARGET) $(REDIST_SOURCES_DIR_HOST):
+	@mkdir -p $@
 
 # Populating the staging with the base directories is handled by the skeleton package
 $(STAGING_DIR):
@@ -617,7 +563,7 @@ define GENERATE_GLIBC_LOCALES
 		fi ; \
 		echo "Generating locale $${inputfile}.$${charmap}" ; \
 		I18NPATH=$(STAGING_DIR)/usr/share/i18n:/usr/share/i18n \
-		$(HOST_DIR)/bin/localedef \
+		$(HOST_DIR)/usr/bin/localedef \
 			--prefix=$(TARGET_DIR) \
 			--$(call LOWERCASE,$(BR2_ENDIAN))-endian \
 			-i $${inputfile} -f $${charmap} \
@@ -667,7 +613,6 @@ endif
 
 $(TARGETS_ROOTFS): target-finalize
 
-.PHONY: target-finalize
 target-finalize: $(PACKAGES)
 	@$(call MESSAGE,"Finalizing target directory")
 	$(foreach hook,$(TARGET_FINALIZE_HOOKS),$($(hook))$(sep))
@@ -675,7 +620,7 @@ target-finalize: $(PACKAGES)
 		$(TARGET_DIR)/usr/lib/pkgconfig $(TARGET_DIR)/usr/share/pkgconfig \
 		$(TARGET_DIR)/usr/lib/cmake $(TARGET_DIR)/usr/share/cmake
 	find $(TARGET_DIR)/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f
-	find $(TARGET_DIR)/lib/ $(TARGET_DIR)/usr/lib/ $(TARGET_DIR)/usr/libexec/ \
+	find $(TARGET_DIR)/lib $(TARGET_DIR)/usr/lib $(TARGET_DIR)/usr/libexec \
 		\( -name '*.a' -o -name '*.la' \) -print0 | xargs -0 rm -f
 ifneq ($(BR2_PACKAGE_GDB),y)
 	rm -rf $(TARGET_DIR)/usr/share/gdb
@@ -690,20 +635,23 @@ endif
 	rm -rf $(TARGET_DIR)/usr/info $(TARGET_DIR)/usr/share/info
 	rm -rf $(TARGET_DIR)/usr/doc $(TARGET_DIR)/usr/share/doc
 	rm -rf $(TARGET_DIR)/usr/share/gtk-doc
-	rmdir $(TARGET_DIR)/usr/share 2>/dev/null || true
+	-rmdir $(TARGET_DIR)/usr/share 2>/dev/null
 	$(STRIP_FIND_CMD) | xargs -0 $(STRIPCMD) 2>/dev/null || true
+	if test -d $(TARGET_DIR)/lib/modules; then \
+		find $(TARGET_DIR)/lib/modules -type f -name '*.ko' -print0 | \
+		xargs -0 -r $(KSTRIPCMD); fi
 
 # See http://sourceware.org/gdb/wiki/FAQ, "GDB does not see any threads
 # besides the one in which crash occurred; or SIGTRAP kills my program when
 # I set a breakpoint"
 ifeq ($(BR2_TOOLCHAIN_HAS_THREADS),y)
-	find $(TARGET_DIR)/lib/ -type f -name 'libpthread*.so*' | \
+	find $(TARGET_DIR)/lib -type f -name 'libpthread*.so*' | \
 		xargs -r $(STRIPCMD) $(STRIP_STRIP_DEBUG)
 endif
 
 # Valgrind needs ld.so with enough information, so only strip
 # debugging symbols.
-	find $(TARGET_DIR)/lib/ -type f -name 'ld-*.so*' | \
+	find $(TARGET_DIR)/lib -type f -name 'ld-*.so*' | \
 		xargs -r $(STRIPCMD) $(STRIP_STRIP_DEBUG)
 	test -f $(TARGET_DIR)/etc/ld.so.conf && \
 		{ echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true
@@ -718,9 +666,6 @@ endif
 		echo "PRETTY_NAME=\"Buildroot $(BR2_VERSION)\"" \
 	) >  $(TARGET_DIR)/etc/os-release
 
-	@$(call MESSAGE,"Sanitizing RPATH in target tree")
-	$(TOPDIR)/support/scripts/fix-rpath target
-
 	@$(foreach d, $(call qstrip,$(BR2_ROOTFS_OVERLAY)), \
 		$(call MESSAGE,"Copying overlay $(d)"); \
 		rsync -a --ignore-times --keep-dirlinks $(RSYNC_VCS_EXCLUSIONS) \
@@ -731,39 +676,32 @@ endif
 		$(call MESSAGE,"Executing post-build script $(s)"); \
 		$(EXTRA_ENV) $(s) $(TARGET_DIR) $(call qstrip,$(BR2_ROOTFS_POST_SCRIPT_ARGS))$(sep))
 
-.PHONY: target-post-image
 target-post-image: $(TARGETS_ROOTFS) target-finalize
 	@$(foreach s, $(call qstrip,$(BR2_ROOTFS_POST_IMAGE_SCRIPT)), \
 		$(call MESSAGE,"Executing post-image script $(s)"); \
 		$(EXTRA_ENV) $(s) $(BINARIES_DIR) $(call qstrip,$(BR2_ROOTFS_POST_SCRIPT_ARGS))$(sep))
 
-.PHONY: source
 source: $(foreach p,$(PACKAGES),$(p)-all-source)
 
-.PHONY: _external-deps external-deps
 _external-deps: $(foreach p,$(PACKAGES),$(p)-all-external-deps)
 external-deps:
 	@$(MAKE1) -Bs $(EXTRAMAKEARGS) _external-deps | sort -u
 
 # check if download URLs are outdated
-.PHONY: source-check
 source-check: $(foreach p,$(PACKAGES),$(p)-all-source-check)
 
-.PHONY: legal-info-clean
 legal-info-clean:
 	@rm -fr $(LEGAL_INFO_DIR)
 
-.PHONY: legal-info-prepare
 legal-info-prepare: $(LEGAL_INFO_DIR)
-	@$(call MESSAGE,"Buildroot $(BR2_VERSION_FULL) Collecting legal info")
-	@$(call legal-license-file,buildroot,buildroot,support/legal-info,COPYING,COPYING,HOST)
+	@$(call MESSAGE,"Collecting legal info")
+	@$(call legal-license-file,buildroot,COPYING,COPYING,HOST)
 	@$(call legal-manifest,PACKAGE,VERSION,LICENSE,LICENSE FILES,SOURCE ARCHIVE,SOURCE SITE,TARGET)
 	@$(call legal-manifest,PACKAGE,VERSION,LICENSE,LICENSE FILES,SOURCE ARCHIVE,SOURCE SITE,HOST)
-	@$(call legal-manifest,buildroot,$(BR2_VERSION_FULL),GPL-2.0+,COPYING,not saved,not saved,HOST)
+	@$(call legal-manifest,buildroot,$(BR2_VERSION_FULL),GPLv2+,COPYING,not saved,not saved,HOST)
 	@$(call legal-warning,the Buildroot source code has not been saved)
 	@cp $(BR2_CONFIG) $(LEGAL_INFO_DIR)/buildroot.config
 
-.PHONY: legal-info
 legal-info: dirs legal-info-clean legal-info-prepare $(foreach p,$(PACKAGES),$(p)-all-legal-info) \
 		$(REDIST_SOURCES_DIR_TARGET) $(REDIST_SOURCES_DIR_HOST)
 	@cat support/legal-info/README.header >>$(LEGAL_REPORT)
@@ -778,14 +716,9 @@ legal-info: dirs legal-info-clean legal-info-prepare $(foreach p,$(PACKAGES),$(p
 		mv .legal-info.sha256 legal-info.sha256)
 	@echo "Legal info produced in $(LEGAL_INFO_DIR)"
 
-.PHONY: show-targets
 show-targets:
 	@echo $(PACKAGES) $(TARGETS_ROOTFS)
 
-.PHONY: show-build-order
-show-build-order: $(patsubst %,%-show-build-order,$(PACKAGES))
-
-.PHONY: graph-build
 graph-build: $(O)/build/build-time.log
 	@install -d $(GRAPHS_DIR)
 	$(foreach o,name build duration,./support/scripts/graph-build-time \
@@ -797,22 +730,19 @@ graph-build: $(O)/build/build-time.log
 				   --output=$(GRAPHS_DIR)/build.pie-$(t).$(BR_GRAPH_OUT) \
 				   $(if $(BR2_GRAPH_ALT),--alternate-colors)$(sep))
 
-.PHONY: graph-depends-requirements
 graph-depends-requirements:
 	@dot -? >/dev/null 2>&1 || \
 		{ echo "ERROR: The 'dot' program from Graphviz is needed for graph-depends" >&2; exit 1; }
 
-.PHONY: graph-depends
 graph-depends: graph-depends-requirements
 	@$(INSTALL) -d $(GRAPHS_DIR)
 	@cd "$(CONFIG_DIR)"; \
 	$(TOPDIR)/support/scripts/graph-depends $(BR2_GRAPH_DEPS_OPTS) \
-		--direct -o $(GRAPHS_DIR)/$(@).dot
+		-o $(GRAPHS_DIR)/$(@).dot
 	dot $(BR2_GRAPH_DOT_OPTS) -T$(BR_GRAPH_OUT) \
 		-o $(GRAPHS_DIR)/$(@).$(BR_GRAPH_OUT) \
 		$(GRAPHS_DIR)/$(@).dot
 
-.PHONY: graph-size
 graph-size:
 	$(Q)mkdir -p $(GRAPHS_DIR)
 	$(Q)$(TOPDIR)/support/scripts/size-stats --builddir $(BASE_DIR) \
@@ -820,21 +750,13 @@ graph-size:
 		--file-size-csv $(GRAPHS_DIR)/file-size-stats.csv \
 		--package-size-csv $(GRAPHS_DIR)/package-size-stats.csv
 
-.PHONY: check-dependencies
 check-dependencies:
 	@cd "$(CONFIG_DIR)"; \
 	$(TOPDIR)/support/scripts/graph-depends -C
 
 else # ifeq ($(BR2_HAVE_DOT_CONFIG),y)
 
-# Some subdirectories are also package names. To avoid that "make linux"
-# on an unconfigured tree produces "Nothing to be done", add an explicit
-# rule for it.
-# Also for 'all' we error out and ask the user to configure first.
-.PHONY: linux toolchain
-linux toolchain all: outputmakefile
-	$(error Please configure Buildroot first (e.g. "make menuconfig"))
-	@exit 1
+all: menuconfig
 
 endif # ifeq ($(BR2_HAVE_DOT_CONFIG),y)
 
@@ -844,9 +766,6 @@ endif # ifeq ($(BR2_HAVE_DOT_CONFIG),y)
 HOSTCFLAGS = $(CFLAGS_FOR_BUILD)
 export HOSTCFLAGS
 
-.PHONY: prepare-kconfig
-prepare-kconfig: outputmakefile $(BUILD_DIR)/.br2-external.in
-
 $(BUILD_DIR)/buildroot-config/%onf:
 	mkdir -p $(@D)/lxdialog
 	PKG_CONFIG_PATH="$(HOST_PKG_CONFIG_PATH)" $(MAKE) CC="$(HOSTCC_NOCCACHE)" HOSTCC="$(HOSTCC_NOCCACHE)" \
@@ -862,23 +781,23 @@ COMMON_CONFIG_ENV = \
 	KCONFIG_AUTOHEADER=$(BUILD_DIR)/buildroot-config/autoconf.h \
 	KCONFIG_TRISTATE=$(BUILD_DIR)/buildroot-config/tristate.config \
 	BR2_CONFIG=$(BR2_CONFIG) \
+	BR2_EXTERNAL=$(BR2_EXTERNAL) \
 	HOST_GCC_VERSION="$(HOSTCC_VERSION)" \
-	BUILD_DIR=$(BUILD_DIR) \
 	SKIP_LEGACY=
 
-xconfig: $(BUILD_DIR)/buildroot-config/qconf prepare-kconfig
+xconfig: $(BUILD_DIR)/buildroot-config/qconf outputmakefile
 	@$(COMMON_CONFIG_ENV) $< $(CONFIG_CONFIG_IN)
 
-gconfig: $(BUILD_DIR)/buildroot-config/gconf prepare-kconfig
+gconfig: $(BUILD_DIR)/buildroot-config/gconf outputmakefile
 	@$(COMMON_CONFIG_ENV) srctree=$(TOPDIR) $< $(CONFIG_CONFIG_IN)
 
-menuconfig: $(BUILD_DIR)/buildroot-config/mconf prepare-kconfig
+menuconfig: $(BUILD_DIR)/buildroot-config/mconf outputmakefile
 	@$(COMMON_CONFIG_ENV) $< $(CONFIG_CONFIG_IN)
 
-nconfig: $(BUILD_DIR)/buildroot-config/nconf prepare-kconfig
+nconfig: $(BUILD_DIR)/buildroot-config/nconf outputmakefile
 	@$(COMMON_CONFIG_ENV) $< $(CONFIG_CONFIG_IN)
 
-config: $(BUILD_DIR)/buildroot-config/conf prepare-kconfig
+config: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 	@$(COMMON_CONFIG_ENV) $< $(CONFIG_CONFIG_IN)
 
 # For the config targets that automatically select options, we pass
@@ -886,33 +805,64 @@ config: $(BUILD_DIR)/buildroot-config/conf prepare-kconfig
 # no values are set for the legacy options so a subsequent oldconfig
 # will query them. Therefore, run an additional olddefconfig.
 
-randconfig allyesconfig alldefconfig allnoconfig: $(BUILD_DIR)/buildroot-config/conf prepare-kconfig
-	@$(COMMON_CONFIG_ENV) SKIP_LEGACY=y $< --$@ $(CONFIG_CONFIG_IN)
+oldconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
+	@$(COMMON_CONFIG_ENV) $< --oldconfig $(CONFIG_CONFIG_IN)
+
+randconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
+	@$(COMMON_CONFIG_ENV) SKIP_LEGACY=y $< --randconfig $(CONFIG_CONFIG_IN)
 	@$(COMMON_CONFIG_ENV) $< --olddefconfig $(CONFIG_CONFIG_IN) >/dev/null
 
-randpackageconfig allyespackageconfig allnopackageconfig: $(BUILD_DIR)/buildroot-config/conf prepare-kconfig
+allyesconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
+	@$(COMMON_CONFIG_ENV) SKIP_LEGACY=y $< --allyesconfig $(CONFIG_CONFIG_IN)
+	@$(COMMON_CONFIG_ENV) $< --olddefconfig $(CONFIG_CONFIG_IN) >/dev/null
+
+allnoconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
+	@$(COMMON_CONFIG_ENV) SKIP_LEGACY=y $< --allnoconfig $(CONFIG_CONFIG_IN)
+	@$(COMMON_CONFIG_ENV) $< --olddefconfig $(CONFIG_CONFIG_IN) >/dev/null
+
+randpackageconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 	@grep -v BR2_PACKAGE_ $(BR2_CONFIG) > $(CONFIG_DIR)/.config.nopkg
 	@$(COMMON_CONFIG_ENV) SKIP_LEGACY=y \
 		KCONFIG_ALLCONFIG=$(CONFIG_DIR)/.config.nopkg \
-		$< --$(subst package,,$@) $(CONFIG_CONFIG_IN)
+		$< --randconfig $(CONFIG_CONFIG_IN)
 	@rm -f $(CONFIG_DIR)/.config.nopkg
 	@$(COMMON_CONFIG_ENV) $< --olddefconfig $(CONFIG_CONFIG_IN) >/dev/null
 
-oldconfig silentoldconfig olddefconfig: $(BUILD_DIR)/buildroot-config/conf prepare-kconfig
-	@$(COMMON_CONFIG_ENV) $< --$@ $(CONFIG_CONFIG_IN)
+allyespackageconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
+	@grep -v BR2_PACKAGE_ $(BR2_CONFIG) > $(CONFIG_DIR)/.config.nopkg
+	@$(COMMON_CONFIG_ENV) SKIP_LEGACY=y \
+		KCONFIG_ALLCONFIG=$(CONFIG_DIR)/.config.nopkg \
+		$< --allyesconfig $(CONFIG_CONFIG_IN)
+	@rm -f $(CONFIG_DIR)/.config.nopkg
+	@$(COMMON_CONFIG_ENV) $< --olddefconfig $(CONFIG_CONFIG_IN) >/dev/null
 
-defconfig: $(BUILD_DIR)/buildroot-config/conf prepare-kconfig
+allnopackageconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
+	@grep -v BR2_PACKAGE_ $(BR2_CONFIG) > $(CONFIG_DIR)/.config.nopkg
+	@$(COMMON_CONFIG_ENV) SKIP_LEGACY=y \
+		KCONFIG_ALLCONFIG=$(CONFIG_DIR)/.config.nopkg \
+		$< --allnoconfig $(CONFIG_CONFIG_IN)
+	@rm -f $(CONFIG_DIR)/.config.nopkg
+	@$(COMMON_CONFIG_ENV) $< --olddefconfig $(CONFIG_CONFIG_IN) >/dev/null
+
+silentoldconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
+	$(COMMON_CONFIG_ENV) $< --silentoldconfig $(CONFIG_CONFIG_IN)
+
+olddefconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
+	$(COMMON_CONFIG_ENV) $< --olddefconfig $(CONFIG_CONFIG_IN)
+
+defconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 	@$(COMMON_CONFIG_ENV) $< --defconfig$(if $(DEFCONFIG),=$(DEFCONFIG)) $(CONFIG_CONFIG_IN)
 
-define percent_defconfig
 # Override the BR2_DEFCONFIG from COMMON_CONFIG_ENV with the new defconfig
-%_defconfig: $(BUILD_DIR)/buildroot-config/conf $(1)/configs/%_defconfig prepare-kconfig
-	@$$(COMMON_CONFIG_ENV) BR2_DEFCONFIG=$(1)/configs/$$@ \
-		$$< --defconfig=$(1)/configs/$$@ $$(CONFIG_CONFIG_IN)
-endef
-$(eval $(foreach d,$(call reverse,$(TOPDIR) $(BR2_EXTERNAL_DIRS)),$(call percent_defconfig,$(d))$(sep)))
+%_defconfig: $(BUILD_DIR)/buildroot-config/conf $(TOPDIR)/configs/%_defconfig outputmakefile
+	@$(COMMON_CONFIG_ENV) BR2_DEFCONFIG=$(TOPDIR)/configs/$@ \
+		$< --defconfig=$(TOPDIR)/configs/$@ $(CONFIG_CONFIG_IN)
 
-savedefconfig: $(BUILD_DIR)/buildroot-config/conf prepare-kconfig
+%_defconfig: $(BUILD_DIR)/buildroot-config/conf $(BR2_EXTERNAL)/configs/%_defconfig outputmakefile
+	@$(COMMON_CONFIG_ENV) BR2_DEFCONFIG=$(BR2_EXTERNAL)/configs/$@ \
+		$< --defconfig=$(BR2_EXTERNAL)/configs/$@ $(CONFIG_CONFIG_IN)
+
+savedefconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 	@$(COMMON_CONFIG_ENV) $< \
 		--savedefconfig=$(if $(DEFCONFIG),$(DEFCONFIG),$(CONFIG_DIR)/defconfig) \
 		$(CONFIG_CONFIG_IN)
@@ -929,49 +879,37 @@ savedefconfig: $(BUILD_DIR)/buildroot-config/conf prepare-kconfig
 # outputmakefile generates a Makefile in the output directory, if using a
 # separate output directory. This allows convenient use of make in the
 # output directory.
-.PHONY: outputmakefile
 outputmakefile:
 ifeq ($(NEED_WRAPPER),y)
 	$(Q)$(TOPDIR)/support/scripts/mkmakefile $(TOPDIR) $(O)
 endif
 
-# Even though the target is a real file, we mark it as PHONY as we
-# want it to be re-generated each time make is invoked, in case the
-# value of BR2_EXTERNAL is changed.
-.PHONY: $(BUILD_DIR)/.br2-external.in
-$(BUILD_DIR)/.br2-external.in: $(BUILD_DIR)
-	$(Q)support/scripts/br2-external -k -o "$(@)" $(BR2_EXTERNAL)
-
 # printvars prints all the variables currently defined in our
 # Makefiles. Alternatively, if a non-empty VARS variable is passed,
 # only the variables matching the make pattern passed in VARS are
 # displayed.
-.PHONY: printvars
 printvars:
-	@:$(foreach V, \
+	@$(foreach V, \
 		$(sort $(if $(VARS),$(filter $(VARS),$(.VARIABLES)),$(.VARIABLES))), \
 		$(if $(filter-out environment% default automatic, \
 				$(origin $V)), \
-		$(if $(QUOTED_VARS),\
-			$(info $V='$(subst ','\'',$(if $(RAW_VARS),$(value $V),$($V)))'), \
-			$(info $V=$(if $(RAW_VARS),$(value $V),$($V))))))
-# ' Syntax colouring...
+		$(info $V=$($V) ($(value $V)))))
 
-.PHONY: clean
 clean:
 	rm -rf $(TARGET_DIR) $(BINARIES_DIR) $(HOST_DIR) \
 		$(BUILD_DIR) $(BASE_DIR)/staging \
 		$(LEGAL_INFO_DIR) $(GRAPHS_DIR)
 
-.PHONY: distclean
 distclean: clean
-ifeq ($(O),$(CURDIR)/output)
+ifeq ($(DL_DIR),$(TOPDIR)/dl)
+	rm -rf $(DL_DIR)
+endif
+ifeq ($(O),output)
 	rm -rf $(O)
 endif
-	rm -rf $(TOPDIR)/dl $(BR2_CONFIG) $(CONFIG_DIR)/.config.old $(CONFIG_DIR)/..config.tmp \
+	rm -rf $(BR2_CONFIG) $(CONFIG_DIR)/.config.old $(CONFIG_DIR)/..config.tmp \
 		$(CONFIG_DIR)/.auto.deps $(BR2_EXTERNAL_FILE)
 
-.PHONY: help
 help:
 	@echo 'Cleaning:'
 	@echo '  clean                  - delete all files created by build'
@@ -980,7 +918,6 @@ help:
 	@echo 'Build:'
 	@echo '  all                    - make world'
 	@echo '  toolchain              - build toolchain'
-	@echo '  sdk                    - build relocatable SDK'
 	@echo
 	@echo 'Configuration:'
 	@echo '  menuconfig             - interactive curses-based configurator'
@@ -996,7 +933,6 @@ help:
 	@echo '  savedefconfig          - Save current config to BR2_DEFCONFIG (minimal config)'
 	@echo '  allyesconfig           - New config where all options are accepted with yes'
 	@echo '  allnoconfig            - New config where all options are answered with no'
-	@echo '  alldefconfig           - New config where all options are set to default'
 	@echo '  randpackageconfig      - New config with random answer to package options'
 	@echo '  allyespackageconfig    - New config where pkg options are accepted with yes'
 	@echo '  allnopackageconfig     - New config where package options are answered with no'
@@ -1009,10 +945,7 @@ help:
 	@echo '  <pkg>-depends          - Build <pkg>'\''s dependencies'
 	@echo '  <pkg>-configure        - Build <pkg> up to the configure step'
 	@echo '  <pkg>-build            - Build <pkg> up to the build step'
-	@echo '  <pkg>-show-depends     - List packages on which <pkg> depends'
-	@echo '  <pkg>-show-rdepends    - List packages which have <pkg> as a dependency'
 	@echo '  <pkg>-graph-depends    - Generate a graph of <pkg>'\''s dependencies'
-	@echo '  <pkg>-graph-rdepends   - Generate a graph of <pkg>'\''s reverse dependencies'
 	@echo '  <pkg>-dirclean         - Remove <pkg> build directory'
 	@echo '  <pkg>-reconfigure      - Restart the build from the configure step'
 	@echo '  <pkg>-rebuild          - Restart the build from the build step'
@@ -1038,7 +971,6 @@ help:
 	@echo '  source-check           - check selected packages for valid download URLs'
 	@echo '  external-deps          - list external packages used'
 	@echo '  legal-info             - generate info about license compliance'
-	@echo '  printvars              - dump all the internal variables'
 	@echo
 	@echo '  make V=0|1             - 0 => quiet build (default), 1 => verbose build'
 	@echo '  make O=dir             - Locate all output files in "dir", including .config'
@@ -1047,35 +979,17 @@ help:
 	@echo 'it on-line at http://buildroot.org/docs.html'
 	@echo
 
-# List the defconfig files
-# $(1): base directory
-# $(2): br2-external name, empty for bundled
-define list-defconfigs
-	@first=true; \
-	for defconfig in $(1)/configs/*_defconfig; do \
-		[ -f "$${defconfig}" ] || continue; \
-		if $${first}; then \
-			if [ "$(2)" ]; then \
-				printf 'External configs in "$(call qstrip,$(2))":\n'; \
-			else \
-				printf "Built-in configs:\n"; \
-			fi; \
-			first=false; \
-		fi; \
-		defconfig="$${defconfig##*/}"; \
-		printf "  %-35s - Build for %s\n" "$${defconfig}" "$${defconfig%_defconfig}"; \
-	done; \
-	$${first} || printf "\n"
-endef
-
-# We iterate over BR2_EXTERNAL_NAMES rather than BR2_EXTERNAL_DIRS,
-# because we want to display the name of the br2-external tree.
-.PHONY: list-defconfigs
 list-defconfigs:
-	$(call list-defconfigs,$(TOPDIR))
-	$(foreach name,$(BR2_EXTERNAL_NAMES),\
-		$(call list-defconfigs,$(BR2_EXTERNAL_$(name)_PATH),\
-			$(BR2_EXTERNAL_$(name)_DESC))$(sep))
+	@echo 'Built-in configs:'
+	@$(foreach b, $(sort $(notdir $(wildcard $(TOPDIR)/configs/*_defconfig))), \
+	  printf "  %-35s - Build for %s\\n" $(b) $(b:_defconfig=);)
+ifneq ($(wildcard $(BR2_EXTERNAL)/configs/*_defconfig),)
+	@echo
+	@echo 'User-provided configs:'
+	@$(foreach b, $(sort $(notdir $(wildcard $(BR2_EXTERNAL)/configs/*_defconfig))), \
+	  printf "  %-35s - Build for %s\\n" $(b) $(b:_defconfig=);)
+endif
+	@echo
 
 release: OUT = buildroot-$(BR2_VERSION)
 
@@ -1093,15 +1007,9 @@ release:
 print-version:
 	@echo $(BR2_VERSION_FULL)
 
-.PHONY: .gitlab-ci.yml
-.gitlab-ci.yml: .gitlab-ci.yml.in
-	cp $< $@
-	(cd configs; LC_ALL=C ls -1 *_defconfig) | sed 's/$$/: *defconfig/' >> $@
-	./support/testing/run-tests -l 2>&1 | sed -r -e '/^test_run \((.*)\).*/!d; s//\1: *runtime_test/' | LC_ALL=C sort >> $@
-
 include docs/manual/manual.mk
--include $(foreach dir,$(BR2_EXTERNAL_DIRS),$(dir)/docs/*/*.mk)
+-include $(BR2_EXTERNAL)/docs/*/*.mk
 
 .PHONY: $(noconfig_targets)
 
-endif #umask / $(CURDIR) / $(O)
+endif #umask

Makefile.legacy

@@ -4,6 +4,9 @@
 # This file contains placeholders to detect backward-compatibility problems.
 # When a buildroot "API" feature is being deprecated, a rule should be added
 # here that issues an error when the old feature is used.
+#
+# This file is not included if BR2_DEPRECATED is selected, so it is possible
+# to bypass the errors (although that's usually a bad idea).
 
 ifeq ($(BR2_LEGACY),y)
 $(error "You have legacy configuration in your .config! Please check your configuration.")

arch/Config.in

@@ -85,14 +85,6 @@ config BR2_bfin
 	  http://www.analog.com/
 	  http://en.wikipedia.org/wiki/Blackfin
 
-config BR2_csky
-	bool "csky"
-	select BR2_ARCH_HAS_MMU_MANDATORY
-	help
-	  csky is processor IP from china.
-	  http://www.c-sky.com/
-	  http://www.github.com/c-sky
-
 config BR2_i386
 	bool "i386"
 	select BR2_ARCH_HAS_MMU_MANDATORY
@@ -167,13 +159,6 @@ config BR2_nios2
 	  http://www.altera.com/
 	  http://en.wikipedia.org/wiki/Nios_II
 
-config BR2_or1k
-	bool "OpenRISC"
-	select BR2_ARCH_HAS_MMU_MANDATORY
-	help
-	  OpenRISC is a free and open processor for embedded system.
-	  http://openrisc.io
-
 config BR2_powerpc
 	bool "PowerPC"
 	select BR2_ARCH_HAS_MMU_MANDATORY
@@ -212,6 +197,16 @@ config BR2_sh
 	  http://www.hitachi.com/
 	  http://en.wikipedia.org/wiki/SuperH
 
+config BR2_sh64
+	bool "SuperH64"
+	depends on BR2_DEPRECATED_SINCE_2015_05
+	select BR2_ARCH_HAS_MMU_MANDATORY
+	help
+	  SuperH64 (or SH) is a 64-bit reduced instruction set computer (RISC)
+	  instruction set architecture (ISA) developed by Hitachi.
+	  http://www.hitachi.com/
+	  http://en.wikipedia.org/wiki/SuperH
+
 config BR2_sparc
 	bool "SPARC"
 	select BR2_ARCH_HAS_MMU_MANDATORY
@@ -264,12 +259,6 @@ config BR2_GCC_TARGET_ARCH
 config BR2_GCC_TARGET_ABI
 	string
 
-config BR2_GCC_TARGET_NAN
-	string
-
-config BR2_GCC_TARGET_FP32_MODE
-	string
-
 config BR2_GCC_TARGET_CPU
 	string
 
@@ -298,12 +287,6 @@ config BR2_GCC_TARGET_MODE
 config BR2_BINFMT_SUPPORTS_SHARED
 	bool
 
-# Must match the name of the architecture from readelf point of view,
-# i.e the "Machine:" field of readelf output. See get_machine_name()
-# in binutils/readelf.c for the list of possible values.
-config BR2_READELF_ARCH_NAME
-	string
-
 # Set up target binary format
 choice
 	prompt "Target Binary Format"
@@ -381,18 +364,18 @@ if BR2_arcle || BR2_arceb
 source "arch/Config.in.arc"
 endif
 
-if BR2_arm || BR2_armeb || BR2_aarch64 || BR2_aarch64_be
+if BR2_arm || BR2_armeb
 source "arch/Config.in.arm"
 endif
 
+if BR2_aarch64 || BR2_aarch64_be
+source "arch/Config.in.aarch64"
+endif
+
 if BR2_bfin
 source "arch/Config.in.bfin"
 endif
 
-if BR2_csky
-source "arch/Config.in.csky"
-endif
-
 if BR2_m68k
 source "arch/Config.in.m68k"
 endif
@@ -409,15 +392,11 @@ if BR2_nios2
 source "arch/Config.in.nios2"
 endif
 
-if BR2_or1k
-source "arch/Config.in.or1k"
-endif
-
 if BR2_powerpc || BR2_powerpc64 || BR2_powerpc64le
 source "arch/Config.in.powerpc"
 endif
 
-if BR2_sh
+if BR2_sh || BR2_sh64
 source "arch/Config.in.sh"
 endif
 

arch/Config.in.aarch64

@@ -0,0 +1,7 @@
+config BR2_ARCH
+	default "aarch64"	if BR2_aarch64
+	default "aarch64_be"	if BR2_aarch64_be
+
+config BR2_ENDIAN
+	default "LITTLE" if BR2_aarch64
+	default "BIG"	 if BR2_aarch64_be

arch/Config.in.arc

@@ -38,10 +38,6 @@ config BR2_GCC_TARGET_CPU
 	default "arc700" if BR2_arc770d
 	default "archs"	 if BR2_archs38
 
-config BR2_READELF_ARCH_NAME
-	default "ARCompact"	if BR2_arc750d || BR2_arc770d
-	default "ARCv2"		if BR2_archs38
-
 choice
 	prompt "MMU Page Size"
 	default BR2_ARC_PAGE_SIZE_8K

arch/Config.in.arm

@@ -31,10 +31,6 @@ config BR2_ARM_CPU_HAS_VFPV4
 	bool
 	select BR2_ARM_CPU_HAS_VFPV3
 
-config BR2_ARM_CPU_HAS_FP_ARMV8
-	bool
-	select BR2_ARM_CPU_HAS_VFPV4
-
 config BR2_ARM_CPU_HAS_ARM
 	bool
 
@@ -59,11 +55,9 @@ config BR2_ARM_CPU_ARMV7A
 config BR2_ARM_CPU_ARMV7M
 	bool
 
-config BR2_ARM_CPU_ARMV8
-	bool
-
 choice
 	prompt "Target Architecture Variant"
+	depends on BR2_arm || BR2_armeb
 	default BR2_arm926t
 	help
 	  Specific CPU variant to use
@@ -74,14 +68,12 @@ config BR2_arm920t
 	select BR2_ARM_CPU_HAS_THUMB
 	select BR2_ARM_CPU_ARMV4
 	select BR2_ARCH_HAS_MMU_OPTIONAL
-	depends on !BR2_ARCH_IS_64
 config BR2_arm922t
 	bool "arm922t"
 	select BR2_ARM_CPU_HAS_ARM
 	select BR2_ARM_CPU_HAS_THUMB
 	select BR2_ARM_CPU_ARMV4
 	select BR2_ARCH_HAS_MMU_OPTIONAL
-	depends on !BR2_ARCH_IS_64
 config BR2_arm926t
 	bool "arm926t"
 	select BR2_ARM_CPU_HAS_ARM
@@ -89,14 +81,12 @@ config BR2_arm926t
 	select BR2_ARM_CPU_HAS_THUMB
 	select BR2_ARM_CPU_ARMV5
 	select BR2_ARCH_HAS_MMU_OPTIONAL
-	depends on !BR2_ARCH_IS_64
 config BR2_arm1136j_s
 	bool "arm1136j-s"
 	select BR2_ARM_CPU_HAS_ARM
 	select BR2_ARM_CPU_HAS_THUMB
 	select BR2_ARM_CPU_ARMV6
 	select BR2_ARCH_HAS_MMU_OPTIONAL
-	depends on !BR2_ARCH_IS_64
 config BR2_arm1136jf_s
 	bool "arm1136jf-s"
 	select BR2_ARM_CPU_HAS_ARM
@@ -104,14 +94,12 @@ config BR2_arm1136jf_s
 	select BR2_ARM_CPU_HAS_THUMB
 	select BR2_ARM_CPU_ARMV6
 	select BR2_ARCH_HAS_MMU_OPTIONAL
-	depends on !BR2_ARCH_IS_64
 config BR2_arm1176jz_s
 	bool "arm1176jz-s"
 	select BR2_ARM_CPU_HAS_ARM
 	select BR2_ARM_CPU_HAS_THUMB
 	select BR2_ARM_CPU_ARMV6
 	select BR2_ARCH_HAS_MMU_OPTIONAL
-	depends on !BR2_ARCH_IS_64
 config BR2_arm1176jzf_s
 	bool "arm1176jzf-s"
 	select BR2_ARM_CPU_HAS_ARM
@@ -119,7 +107,6 @@ config BR2_arm1176jzf_s
 	select BR2_ARM_CPU_HAS_THUMB
 	select BR2_ARM_CPU_ARMV6
 	select BR2_ARCH_HAS_MMU_OPTIONAL
-	depends on !BR2_ARCH_IS_64
 config BR2_arm11mpcore
 	bool "mpcore"
 	select BR2_ARM_CPU_HAS_ARM
@@ -127,7 +114,6 @@ config BR2_arm11mpcore
 	select BR2_ARM_CPU_HAS_THUMB
 	select BR2_ARM_CPU_ARMV6
 	select BR2_ARCH_HAS_MMU_OPTIONAL
-	depends on !BR2_ARCH_IS_64
 config BR2_cortex_a5
 	bool "cortex-A5"
 	select BR2_ARM_CPU_HAS_ARM
@@ -136,7 +122,6 @@ config BR2_cortex_a5
 	select BR2_ARM_CPU_HAS_THUMB2
 	select BR2_ARM_CPU_ARMV7A
 	select BR2_ARCH_HAS_MMU_OPTIONAL
-	depends on !BR2_ARCH_IS_64
 config BR2_cortex_a7
 	bool "cortex-A7"
 	select BR2_ARM_CPU_HAS_ARM
@@ -145,7 +130,6 @@ config BR2_cortex_a7
 	select BR2_ARM_CPU_HAS_THUMB2
 	select BR2_ARM_CPU_ARMV7A
 	select BR2_ARCH_HAS_MMU_OPTIONAL
-	depends on !BR2_ARCH_IS_64
 config BR2_cortex_a8
 	bool "cortex-A8"
 	select BR2_ARM_CPU_HAS_ARM
@@ -154,7 +138,6 @@ config BR2_cortex_a8
 	select BR2_ARM_CPU_HAS_THUMB2
 	select BR2_ARM_CPU_ARMV7A
 	select BR2_ARCH_HAS_MMU_OPTIONAL
-	depends on !BR2_ARCH_IS_64
 config BR2_cortex_a9
 	bool "cortex-A9"
 	select BR2_ARM_CPU_HAS_ARM
@@ -163,7 +146,6 @@ config BR2_cortex_a9
 	select BR2_ARM_CPU_HAS_THUMB2
 	select BR2_ARM_CPU_ARMV7A
 	select BR2_ARCH_HAS_MMU_OPTIONAL
-	depends on !BR2_ARCH_IS_64
 config BR2_cortex_a12
 	bool "cortex-A12"
 	select BR2_ARM_CPU_HAS_ARM
@@ -172,7 +154,6 @@ config BR2_cortex_a12
 	select BR2_ARM_CPU_HAS_THUMB2
 	select BR2_ARM_CPU_ARMV7A
 	select BR2_ARCH_HAS_MMU_OPTIONAL
-	depends on !BR2_ARCH_IS_64
 config BR2_cortex_a15
 	bool "cortex-A15"
 	select BR2_ARM_CPU_HAS_ARM
@@ -181,16 +162,6 @@ config BR2_cortex_a15
 	select BR2_ARM_CPU_HAS_THUMB2
 	select BR2_ARM_CPU_ARMV7A
 	select BR2_ARCH_HAS_MMU_OPTIONAL
-	depends on !BR2_ARCH_IS_64
-config BR2_cortex_a15_a7
-	bool "cortex-A15/A7 big.LITTLE"
-	select BR2_ARM_CPU_HAS_ARM
-	select BR2_ARM_CPU_HAS_NEON
-	select BR2_ARM_CPU_HAS_VFPV4
-	select BR2_ARM_CPU_HAS_THUMB2
-	select BR2_ARM_CPU_ARMV7A
-	select BR2_ARCH_HAS_MMU_OPTIONAL
-	depends on !BR2_ARCH_IS_64
 config BR2_cortex_a17
 	bool "cortex-A17"
 	select BR2_ARM_CPU_HAS_ARM
@@ -199,98 +170,41 @@ config BR2_cortex_a17
 	select BR2_ARM_CPU_HAS_THUMB2
 	select BR2_ARM_CPU_ARMV7A
 	select BR2_ARCH_HAS_MMU_OPTIONAL
-	depends on !BR2_ARCH_IS_64
-config BR2_cortex_a17_a7
-	bool "cortex-A17/A7 big.LITTLE"
-	select BR2_ARM_CPU_HAS_ARM
-	select BR2_ARM_CPU_HAS_NEON
-	select BR2_ARM_CPU_HAS_VFPV4
-	select BR2_ARM_CPU_HAS_THUMB2
-	select BR2_ARM_CPU_ARMV7A
-	select BR2_ARCH_HAS_MMU_OPTIONAL
-	depends on !BR2_ARCH_IS_64
-config BR2_cortex_a53
-	bool "cortex-A53"
-	select BR2_ARM_CPU_HAS_ARM if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_NEON if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_THUMB2 if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_FP_ARMV8
-	select BR2_ARM_CPU_ARMV8
-	select BR2_ARCH_HAS_MMU_OPTIONAL
-config BR2_cortex_a57
-	bool "cortex-A57"
-	select BR2_ARM_CPU_HAS_ARM if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_NEON if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_THUMB2 if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_FP_ARMV8
-	select BR2_ARM_CPU_ARMV8
-	select BR2_ARCH_HAS_MMU_OPTIONAL
-config BR2_cortex_a57_a53
-	bool "cortex-A57/A53 big.LITTLE"
-	select BR2_ARM_CPU_HAS_ARM if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_NEON if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_THUMB2 if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_FP_ARMV8
-	select BR2_ARM_CPU_ARMV8
-	select BR2_ARCH_HAS_MMU_OPTIONAL
-config BR2_cortex_a72
-	bool "cortex-A72"
-	select BR2_ARM_CPU_HAS_ARM if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_NEON if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_THUMB2 if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_FP_ARMV8
-	select BR2_ARM_CPU_ARMV8
-	select BR2_ARCH_HAS_MMU_OPTIONAL
-config BR2_cortex_a72_a53
-	bool "cortex-A72/A53 big.LITTLE"
-	select BR2_ARM_CPU_HAS_ARM if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_NEON if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_THUMB2 if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_FP_ARMV8
-	select BR2_ARM_CPU_ARMV8
-	select BR2_ARCH_HAS_MMU_OPTIONAL
 config BR2_cortex_m3
 	bool "cortex-M3"
 	select BR2_ARM_CPU_HAS_THUMB2
 	select BR2_ARM_CPU_ARMV7M
-	depends on !BR2_ARCH_IS_64
 config BR2_cortex_m4
 	bool "cortex-M4"
 	select BR2_ARM_CPU_HAS_THUMB2
 	select BR2_ARM_CPU_ARMV7M
-	depends on !BR2_ARCH_IS_64
 config BR2_fa526
 	bool "fa526/626"
 	select BR2_ARM_CPU_HAS_ARM
 	select BR2_ARM_CPU_ARMV4
 	select BR2_ARCH_HAS_MMU_OPTIONAL
-	depends on !BR2_ARCH_IS_64
 config BR2_pj4
 	bool "pj4"
 	select BR2_ARM_CPU_HAS_ARM
 	select BR2_ARM_CPU_HAS_VFPV3
 	select BR2_ARM_CPU_ARMV7A
 	select BR2_ARCH_HAS_MMU_OPTIONAL
-	depends on !BR2_ARCH_IS_64
 config BR2_strongarm
 	bool "strongarm sa110/sa1100"
 	select BR2_ARM_CPU_HAS_ARM
 	select BR2_ARM_CPU_ARMV4
 	select BR2_ARCH_HAS_MMU_OPTIONAL
-	depends on !BR2_ARCH_IS_64
 config BR2_xscale
 	bool "xscale"
 	select BR2_ARM_CPU_HAS_ARM
 	select BR2_ARM_CPU_HAS_THUMB
 	select BR2_ARM_CPU_ARMV5
 	select BR2_ARCH_HAS_MMU_OPTIONAL
-	depends on !BR2_ARCH_IS_64
 config BR2_iwmmxt
 	bool "iwmmxt"
 	select BR2_ARM_CPU_HAS_ARM
 	select BR2_ARM_CPU_ARMV5
 	select BR2_ARCH_HAS_MMU_OPTIONAL
-	depends on !BR2_ARCH_IS_64
 endchoice
 
 config BR2_ARM_ENABLE_NEON
@@ -370,7 +284,7 @@ endchoice
 
 choice
 	prompt "Floating point strategy"
-	default BR2_ARM_FPU_FP_ARMV8 if BR2_ARM_CPU_HAS_FP_ARMV8
+	depends on BR2_ARM_EABI || BR2_ARM_EABIHF
 	default BR2_ARM_FPU_VFPV4D16 if BR2_ARM_CPU_HAS_VFPV4
 	default BR2_ARM_FPU_VFPV3D16 if BR2_ARM_CPU_HAS_VFPV3
 	default BR2_ARM_FPU_VFPV2 if BR2_ARM_CPU_HAS_VFPV2
@@ -481,25 +395,10 @@ config BR2_ARM_FPU_NEON_VFPV4
 	  example on Cortex-A5 and Cortex-A7, support for VFPv4 and
 	  NEON is optional.
 
-config BR2_ARM_FPU_FP_ARMV8
-	bool "FP-ARMv8"
-	depends on BR2_ARM_CPU_HAS_FP_ARMV8
-	help
-	  This option allows to use the ARMv8 floating point unit.
-
-config BR2_ARM_FPU_NEON_FP_ARMV8
-	bool "NEON/FP-ARMv8"
-	depends on BR2_ARM_CPU_HAS_FP_ARMV8
-	depends on BR2_ARM_CPU_HAS_NEON
-	help
-	  This option allows to use both the ARMv8 floating point unit
-	  and the NEON SIMD unit for floating point operations.
-
 endchoice
 
 choice
 	prompt "ARM instruction set"
-	depends on BR2_arm || BR2_armeb
 
 config BR2_ARM_INSTRUCTIONS_ARM
 	bool "ARM"
@@ -535,14 +434,12 @@ config BR2_ARM_INSTRUCTIONS_THUMB2
 endchoice
 
 config BR2_ARCH
-	default "arm"		if BR2_arm
-	default "armeb"		if BR2_armeb
-	default "aarch64"	if BR2_aarch64
-	default "aarch64_be"	if BR2_aarch64_be
+	default "arm"	if BR2_arm
+	default "armeb"	if BR2_armeb
 
 config BR2_ENDIAN
-	default "LITTLE" if (BR2_arm || BR2_aarch64)
-	default "BIG"	 if (BR2_armeb || BR2_aarch64_be)
+	default "LITTLE" if BR2_arm
+	default "BIG"	 if BR2_armeb
 
 config BR2_GCC_TARGET_CPU
 	default "arm920t"	if BR2_arm920t
@@ -560,9 +457,7 @@ config BR2_GCC_TARGET_CPU
 	default "cortex-a9"	if BR2_cortex_a9
 	default "cortex-a12"	if BR2_cortex_a12
 	default "cortex-a15"	if BR2_cortex_a15
-	default "cortex-a15.cortex-a7"	if BR2_cortex_a15_a7
 	default "cortex-a17"	if BR2_cortex_a17
-	default "cortex-a17.cortex-a7"	if BR2_cortex_a17_a7
 	default "cortex-m3"	if BR2_cortex_m3
 	default "cortex-m4"	if BR2_cortex_m4
 	default "fa526"		if BR2_fa526
@@ -570,27 +465,18 @@ config BR2_GCC_TARGET_CPU
 	default "strongarm"	if BR2_strongarm
 	default "xscale"	if BR2_xscale
 	default "iwmmxt"	if BR2_iwmmxt
-	default "cortex-a53"	if BR2_cortex_a53
-	default "cortex-a57"	if BR2_cortex_a57
-	default "cortex-a57.cortex-a53"	if BR2_cortex_a57_a53
-	default "cortex-a72"	if BR2_cortex_a72
-	default "cortex-a72.cortex-a53"	if BR2_cortex_a72_a53
 
 config BR2_GCC_TARGET_ABI
-	default "aapcs-linux"	if BR2_arm || BR2_armeb
-	default "lp64"		if BR2_aarch64 || BR2_aarch64_be
+	default "aapcs-linux"
 
 config BR2_GCC_TARGET_FPU
-	depends on BR2_arm || BR2_armeb
 	default "vfp"		if BR2_ARM_FPU_VFPV2
 	default "vfpv3"		if BR2_ARM_FPU_VFPV3
-	default "vfpv3-d16"	if BR2_ARM_FPU_VFPV3D16
-	default "vfpv4"		if BR2_ARM_FPU_VFPV4
-	default "vfpv4-d16"	if BR2_ARM_FPU_VFPV4D16
-	default "neon"		if BR2_ARM_FPU_NEON
-	default "neon-vfpv4"	if BR2_ARM_FPU_NEON_VFPV4
-	default "fp-armv8"	if BR2_ARM_FPU_FP_ARMV8
-	default "neon-fp-armv8"	if BR2_ARM_FPU_NEON_FP_ARMV8
+	default "vfpv3-d16" 	if BR2_ARM_FPU_VFPV3D16
+	default "vfpv4" 	if BR2_ARM_FPU_VFPV4
+	default "vfpv4-d16" 	if BR2_ARM_FPU_VFPV4D16
+	default "neon" 		if BR2_ARM_FPU_NEON
+	default "neon-vfpv4" 	if BR2_ARM_FPU_NEON_VFPV4
 
 config BR2_GCC_TARGET_FLOAT_ABI
 	default "soft"		if BR2_ARM_SOFT_FLOAT
@@ -600,7 +486,3 @@ config BR2_GCC_TARGET_FLOAT_ABI
 config BR2_GCC_TARGET_MODE
 	default "arm"		if BR2_ARM_INSTRUCTIONS_ARM
 	default "thumb"		if BR2_ARM_INSTRUCTIONS_THUMB || BR2_ARM_INSTRUCTIONS_THUMB2
-
-config BR2_READELF_ARCH_NAME
-	default "ARM"		if BR2_arm || BR2_armeb
-	default "AArch64"	if BR2_aarch64 || BR2_aarch64_be

arch/Config.in.bfin

@@ -105,6 +105,3 @@ config BR2_GCC_TARGET_CPU_REVISION
 	  value of the -mcpu option. For example, if the selected CPU is
 	  bf609, and then selected CPU revision is "0.0", then gcc will
 	  receive the -mcpu=bf609-0.0 option.
-
-config BR2_READELF_ARCH_NAME
-	default "Analog Devices Blackfin"

arch/Config.in.csky

@@ -1,48 +0,0 @@
-choice
-	prompt "Target Architecture Variant"
-	default BR2_ck610
-	help
-	  Specific CPU variant to use
-
-config BR2_ck610
-	bool "ck610"
-
-config BR2_ck807
-	bool "ck807"
-
-config BR2_ck810
-	bool "ck810"
-
-endchoice
-
-config BR2_CSKY_FPU
-	bool "Enable FPU coprocessor"
-	depends on BR2_ck810 || BR2_ck807
-	help
-	  You can say N here if your C-SKY CPU doesn't have a
-	  Floating-Point Coprocessor or if you don't need FPU support
-	  for your user-space programs.
-
-config BR2_CSKY_DSP
-	bool "Enable DSP enhanced instructions"
-	depends on BR2_ck810 || BR2_ck807
-
-config BR2_ARCH
-	default "csky"
-
-config BR2_ENDIAN
-	default "LITTLE"
-
-config BR2_GCC_TARGET_CPU
-	default "ck610"		if (BR2_ck610 && !BR2_CSKY_FPU && !BR2_CSKY_DSP)
-	default "ck807"		if (BR2_ck807 && !BR2_CSKY_FPU && !BR2_CSKY_DSP)
-	default "ck807e"	if (BR2_ck807 && !BR2_CSKY_FPU &&  BR2_CSKY_DSP)
-	default "ck807f"	if (BR2_ck807 &&  BR2_CSKY_FPU && !BR2_CSKY_DSP)
-	default "ck807ef"	if (BR2_ck807 &&  BR2_CSKY_FPU &&  BR2_CSKY_DSP)
-	default "ck810"		if (BR2_ck810 && !BR2_CSKY_FPU && !BR2_CSKY_DSP)
-	default "ck810e"	if (BR2_ck810 && !BR2_CSKY_FPU &&  BR2_CSKY_DSP)
-	default "ck810f"	if (BR2_ck810 &&  BR2_CSKY_FPU && !BR2_CSKY_DSP)
-	default "ck810ef"	if (BR2_ck810 &&  BR2_CSKY_FPU &&  BR2_CSKY_DSP)
-
-config BR2_READELF_ARCH_NAME
-	default "CSKY"

arch/Config.in.m68k

@@ -35,6 +35,3 @@ endchoice
 config BR2_GCC_TARGET_CPU
 	default "68040"		if BR2_m68k_68040
 	default "5208"		if BR2_m68k_cf5208
-
-config BR2_READELF_ARCH_NAME
-	default "MC68000"

arch/Config.in.microblaze

@@ -6,9 +6,6 @@ config BR2_ENDIAN
 	default "LITTLE" if BR2_microblazeel
 	default "BIG"	 if BR2_microblazebe
 
-config BR2_READELF_ARCH_NAME
-	default "Xilinx MicroBlaze"
-
 config BR2_microblaze
 	bool
 	default y if BR2_microblazeel || BR2_microblazebe

arch/Config.in.mips

@@ -1,27 +1,3 @@
-# mips default CPU ISAs
-config BR2_MIPS_CPU_MIPS32
-	bool
-	select BR2_MIPS_NAN_LEGACY
-config BR2_MIPS_CPU_MIPS32R2
-	bool
-	select BR2_MIPS_NAN_LEGACY
-config BR2_MIPS_CPU_MIPS32R5
-	bool
-config BR2_MIPS_CPU_MIPS32R6
-	bool
-	select BR2_MIPS_NAN_2008
-config BR2_MIPS_CPU_MIPS64
-	bool
-	select BR2_MIPS_NAN_LEGACY
-config BR2_MIPS_CPU_MIPS64R2
-	bool
-	select BR2_MIPS_NAN_LEGACY
-config BR2_MIPS_CPU_MIPS64R5
-	bool
-config BR2_MIPS_CPU_MIPS64R6
-	bool
-	select BR2_MIPS_NAN_2008
-
 choice
 	prompt "Target Architecture Variant"
 	depends on BR2_mips || BR2_mipsel || BR2_mips64 || BR2_mips64el
@@ -30,80 +6,27 @@ choice
 	help
 	  Specific CPU variant to use
 
-	  64bit cabable: 64, 64r2, 64r5, 64r6
-	  non-64bit capable: 32, 32r2, 32r5, 32r6
+	  64bit cabable: 64, 64r2, 64r6
+	  non-64bit capable: 32, 32r2, 32r6
 
 config BR2_mips_32
-	bool "Generic MIPS32"
+	bool "mips 32"
 	depends on !BR2_ARCH_IS_64
-	select BR2_MIPS_CPU_MIPS32
 config BR2_mips_32r2
-	bool "Generic MIPS32R2"
+	bool "mips 32r2"
 	depends on !BR2_ARCH_IS_64
-	select BR2_MIPS_CPU_MIPS32R2
-config BR2_mips_32r5
-	bool "Generic MIPS32R5"
-	depends on !BR2_ARCH_IS_64
-	select BR2_MIPS_CPU_MIPS32R5
 config BR2_mips_32r6
-	bool "Generic MIPS32R6"
+	bool "mips 32r6"
 	depends on !BR2_ARCH_IS_64
-	select BR2_MIPS_CPU_MIPS32R6
-config BR2_mips_interaptiv
-	bool "interAptiv"
-	depends on !BR2_ARCH_IS_64
-	select BR2_MIPS_CPU_MIPS32R2
-config BR2_mips_m5150
-	bool "M5150"
-	depends on !BR2_ARCH_IS_64
-	select BR2_MIPS_CPU_MIPS32R5
-	select BR2_MIPS_NAN_2008
-config BR2_mips_m6250
-	bool "M6250"
-	depends on !BR2_ARCH_IS_64
-	select BR2_MIPS_CPU_MIPS32R6
-config BR2_mips_p5600
-	bool "P5600"
-	depends on !BR2_ARCH_IS_64
-	select BR2_MIPS_CPU_MIPS32R5
-	select BR2_MIPS_NAN_2008
-config BR2_mips_xburst
-	bool "XBurst"
-	depends on !BR2_ARCH_IS_64
-	select BR2_MIPS_CPU_MIPS32R2
-	help
-	  The Ingenic XBurst is a MIPS32R2 microprocessor. It has a
-	  bug in the FPU that can generate incorrect results in
-	  certain cases. The problem shows up when you have several
-	  fused madd instructions in sequence with dependant
-	  operands. This requires the -mno-fused-madd compiler option
-	  to be used in order to prevent emitting these instructions.
-
-	  See http://www.ingenic.com/en/?xburst.html
 config BR2_mips_64
-	bool "Generic MIPS64"
+	bool "mips 64"
 	depends on BR2_ARCH_IS_64
-	select BR2_MIPS_CPU_MIPS64
 config BR2_mips_64r2
-	bool "Generic MIPS64R2"
+	bool "mips 64r2"
 	depends on BR2_ARCH_IS_64
-	select BR2_MIPS_CPU_MIPS64R2
-config BR2_mips_64r5
-	bool "Generic MIPS64R5"
-	depends on BR2_ARCH_IS_64
-	select BR2_MIPS_CPU_MIPS64R5
 config BR2_mips_64r6
-	bool "Generic MIPS64R6"
+	bool "mips 64r6"
 	depends on BR2_ARCH_IS_64
-	select BR2_MIPS_CPU_MIPS64R6
-config BR2_mips_i6400
-	bool "I6400"
-	depends on BR2_ARCH_IS_64
-	select BR2_MIPS_CPU_MIPS64R6
-config BR2_mips_p6600
-	bool "P6600"
-	depends on BR2_ARCH_IS_64
-	select BR2_MIPS_CPU_MIPS64R6
 endchoice
 
 
@@ -134,64 +57,6 @@ config BR2_MIPS_SOFT_FLOAT
 	  floating point functions, then everything will need to be
 	  compiled with soft floating point support (-msoft-float).
 
-choice
-	prompt "FP mode"
-	depends on !BR2_ARCH_IS_64 && !BR2_MIPS_SOFT_FLOAT
-	default BR2_MIPS_FP32_MODE_XX if BR2_TOOLCHAIN_HAS_MFPXX_OPTION
-	help
-	  MIPS32 supports different FP modes (32,xx,64). Information about FP
-	  modes can be found here:
-	  https://sourceware.org/binutils/docs/as/MIPS-Options.html
-	  https://dmz-portal.imgtec.com/wiki/MIPS_O32_ABI_-_FR0_and_FR1_Interlinking#5._Generating_modeless_code
-
-config BR2_MIPS_FP32_MODE_32
-	bool "32"
-	depends on !BR2_MIPS_CPU_MIPS32R6
-
-config BR2_MIPS_FP32_MODE_XX
-	bool "xx"
-	depends on BR2_TOOLCHAIN_HAS_MFPXX_OPTION
-
-config BR2_MIPS_FP32_MODE_64
-	bool "64"
-	depends on !BR2_MIPS_CPU_MIPS32
-endchoice
-
-config BR2_GCC_TARGET_FP32_MODE
-	default "32"	if BR2_MIPS_FP32_MODE_32
-	default "xx"	if BR2_MIPS_FP32_MODE_XX
-	default "64"	if BR2_MIPS_FP32_MODE_64
-
-config BR2_MIPS_NAN_LEGACY
-	bool
-
-config BR2_MIPS_NAN_2008
-	bool
-
-choice
-	prompt "Target NaN"
-	depends on BR2_TOOLCHAIN_HAS_MNAN_OPTION
-	depends on BR2_mips_32r5 || BR2_mips_64r5
-	default BR2_MIPS_ENABLE_NAN_2008
-	help
-	  MIPS supports two different NaN encodings, legacy and 2008.
-	  Information about MIPS NaN encodings can be found here:
-	  https://sourceware.org/binutils/docs/as/MIPS-NaN-Encodings.html
-
-config BR2_MIPS_ENABLE_NAN_LEGACY
-	bool "legacy"
-	select BR2_MIPS_NAN_LEGACY
-
-config BR2_MIPS_ENABLE_NAN_2008
-	bool "2008"
-	depends on !BR2_MIPS_SOFT_FLOAT
-	select BR2_MIPS_NAN_2008
-endchoice
-
-config BR2_GCC_TARGET_NAN
-	default "legacy"	if BR2_MIPS_NAN_LEGACY
-	default "2008"		if BR2_MIPS_NAN_2008
-
 config BR2_ARCH
 	default "mips"		if BR2_mips
 	default "mipsel"	if BR2_mipsel
@@ -200,24 +65,15 @@ config BR2_ARCH
 
 config BR2_ENDIAN
 	default "LITTLE"	if BR2_mipsel || BR2_mips64el
-	default "BIG"		if BR2_mips || BR2_mips64
+	default "BIG" 	    	if BR2_mips || BR2_mips64
 
 config BR2_GCC_TARGET_ARCH
 	default "mips32"	if BR2_mips_32
 	default "mips32r2"	if BR2_mips_32r2
-	default "mips32r5"	if BR2_mips_32r5
 	default "mips32r6"	if BR2_mips_32r6
-	default "interaptiv"	if BR2_mips_interaptiv
-	default "m5101"		if BR2_mips_m5150
-	default "m6201"		if BR2_mips_m6250
-	default "p5600"		if BR2_mips_p5600
-	default "mips32r2"	if BR2_mips_xburst
 	default "mips64"	if BR2_mips_64
 	default "mips64r2"	if BR2_mips_64r2
-	default "mips64r5"	if BR2_mips_64r5
 	default "mips64r6"	if BR2_mips_64r6
-	default "i6400"		if BR2_mips_i6400
-	default "p6600"		if BR2_mips_p6600
 
 config BR2_MIPS_OABI32
 	bool
@@ -227,6 +83,3 @@ config BR2_GCC_TARGET_ABI
 	default "32"		if BR2_MIPS_OABI32
 	default "n32"		if BR2_MIPS_NABI32
 	default "64"		if BR2_MIPS_NABI64
-
-config BR2_READELF_ARCH_NAME
-	default "MIPS R3000"

arch/Config.in.nios2

@@ -3,6 +3,3 @@ config BR2_ARCH
 
 config BR2_ENDIAN
 	default "LITTLE"
-
-config BR2_READELF_ARCH_NAME
-	default "Altera Nios II"

arch/Config.in.or1k

@@ -1,8 +0,0 @@
-config BR2_ARCH
-	default "or1k"
-
-config BR2_ENDIAN
-	default "BIG"
-
-config BR2_READELF_ARCH_NAME
-	default "OpenRISC 1000"

arch/Config.in.powerpc

@@ -212,7 +212,3 @@ config BR2_GCC_TARGET_ABI
 	default "no-spe"		if BR2_PPC_ABI_no-spe
 	default "ibmlongdouble"		if BR2_PPC_ABI_ibmlongdouble
 	default "ieeelongdouble"	if BR2_PPC_ABI_ieeelongdouble
-
-config BR2_READELF_ARCH_NAME
-	default "PowerPC"	if BR2_powerpc
-	default "PowerPC64"	if BR2_powerpc64 || BR2_powerpc64le

arch/Config.in.sh

@@ -23,10 +23,8 @@ config BR2_ARCH
 	default "sh4eb"		if BR2_sh4eb
 	default "sh4a"		if BR2_sh4a
 	default "sh4aeb"	if BR2_sh4aeb
+	default "sh64"		if BR2_sh64
 
 config BR2_ENDIAN
-	default "LITTLE"	if BR2_sh4 || BR2_sh4a
+	default "LITTLE"	if BR2_sh4 || BR2_sh4a || BR2_sh64
 	default "BIG"		if BR2_sh2a || BR2_sh4eb || BR2_sh4aeb
-
-config BR2_READELF_ARCH_NAME
-	default "Renesas / SuperH SH"

arch/Config.in.sparc

@@ -28,7 +28,3 @@ config BR2_GCC_TARGET_CPU
 	default "leon3"		if BR2_sparc_leon3
 	default "v8"		if BR2_sparc_v8
 	default "ultrasparc"	if BR2_sparc_v9
-
-config BR2_READELF_ARCH_NAME
-	default "Sparc"		if BR2_sparc
-	default "Sparc v9"	if BR2_sparc64

arch/Config.in.x86

@@ -275,7 +275,3 @@ config BR2_GCC_TARGET_ARCH
 	default "c3"		if BR2_x86_c3
 	default "c3-2"		if BR2_x86_c32
 	default "geode"		if BR2_x86_geode
-
-config BR2_READELF_ARCH_NAME
-	default "Intel 80386"			if BR2_i386
-	default "Advanced Micro Devices X86-64" if BR2_x86_64

arch/Config.in.xtensa

@@ -2,32 +2,39 @@ choice
 	prompt "Target Architecture Variant"
 	depends on BR2_xtensa
 	default BR2_xtensa_fsf
-
 config BR2_XTENSA_CUSTOM
 	select BR2_ARCH_HAS_MMU_OPTIONAL
 	bool "Custom Xtensa processor configuration"
-
 config BR2_xtensa_fsf
 	select BR2_ARCH_HAS_MMU_MANDATORY
 	bool "fsf - Default configuration"
-
 endchoice
 
-config BR2_XTENSA_OVERLAY_FILE
-	string "Overlay file for custom configuration"
+config BR2_XTENSA_CUSTOM_NAME
+	string "Custom Xtensa processor configuration name"
 	depends on BR2_XTENSA_CUSTOM
+	default ""
 	help
-	  Enter the path to the overlay tarball for a custom processor
-	  configuration.
+	  Name given to a custom Xtensa processor configuration.
 
+config BR2_XTENSA_CORE_NAME
+	string
+	default BR2_XTENSA_CUSTOM_NAME	if BR2_XTENSA_CUSTOM
+	default ""			if BR2_xtensa_fsf
+
+config BR2_XTENSA_OVERLAY_DIR
+	string "Overlay directory for custom configuration"
+	depends on BR2_XTENSA_CUSTOM
+	default ""
+	help
+	  Provide the directory path that contains the overlay file
+	  for a custom processor configuration. The path is relative
+	  to the top directory of buildroot.
 	  These overlay files are tar packages with updated configuration
 	  files for various toolchain packages and Xtensa processor
 	  configurations. They are provided by the processor vendor or
 	  directly from Tensilica.
 
-	  The path can be either absolute, or relative to the top directory
-	  of buildroot.
-
 choice
 	prompt "Target Architecture Endianness"
 	depends on BR2_XTENSA_CUSTOM
@@ -47,6 +54,3 @@ config BR2_ENDIAN
 
 config BR2_ARCH
 	default "xtensa"	if BR2_xtensa
-
-config BR2_READELF_ARCH_NAME
-	default "Tensilica Xtensa Processor"

arch/arch.mk.xtensa

@@ -1,36 +0,0 @@
-################################################################################
-# This variable can be used by packages that need to extract the overlay.
-#
-# ARCH_XTENSA_OVERLAY_FILE is the path to the overlay tarball; empty if not
-#                          using any overlay
-#
-# Example:
-#   ifneq ($(ARCH_XTENSA_OVERLAY_FILE),)
-#       tar xf $(ARCH_XTENSA_OVERLAY_FILE) -C $(@D) --strip-components=1 gcc
-#   endif
-################################################################################
-BR_ARCH_XTENSA_OVERLAY_FILE = $(call qstrip,$(BR2_XTENSA_OVERLAY_FILE))
-ifneq ($(filter http://% https://% ftp://% scp://%,$(BR_ARCH_XTENSA_OVERLAY_FILE)),)
-ARCH_XTENSA_OVERLAY_URL = $(BR_ARCH_XTENSA_OVERLAY_FILE)
-ARCH_XTENSA_OVERLAY_FILE = $(DL_DIR)/$(notdir $(BR_ARCH_XTENSA_OVERLAY_FILE))
-# Do not check that file, we can't know its hash
-BR_NO_CHECK_HASH_FOR += $(notdir $(ARCH_XTENSA_OVERLAY_URL))
-else
-ARCH_XTENSA_OVERLAY_FILE = $(BR_ARCH_XTENSA_OVERLAY_FILE)
-endif
-
-################################################################################
-# arch-xtensa-overlay-extract -- extract an extensa overlay
-#
-# argument 1 is the path in which to extract
-# argument 2 is the component to extract, one of: gcc, binutils, gdb, linux,
-#            u-boot
-#
-# Example:
-#   $(call arch-xtensa-overlay-extract,/path/to/overlay.tar,$(@D),gcc)
-################################################################################
-define arch-xtensa-overlay-extract
-	$(call suitable-extractor,$(ARCH_XTENSA_OVERLAY_FILE)) \
-		$(ARCH_XTENSA_OVERLAY_FILE) | \
-	$(TAR) --strip-components=1 -C $(1) $(TAR_OPTIONS) - $(2)
-endef

board/acmesystems/aria-g25/genimage.cfg

@@ -1,35 +0,0 @@
-# Minimal SD card image for the Acmesystems Aria G25
-
-image boot.vfat {
-	vfat {
-		file zImage {
-			image = "zImage"
-		}
-
-		file at91-ariag25.dtb {
-			image = "at91-ariag25.dtb"
-		}
-
-		file boot.bin {
-			image = "at91sam9x5_aria-sdcardboot-linux-zimage-dt-3.8.6.bin"
-		}
-	}
-	size = 16M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition boot {
-		partition-type = 0xC
-		bootable = "true"
-		image = "boot.vfat"
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-		size = 512M
-	}
-}

board/acmesystems/aria-g25/post-image.sh

@@ -1,14 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname $0)"
-GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
-GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
-
-rm -rf "${GENIMAGE_TMP}"
-
-genimage  \
-	--rootpath "${TARGET_DIR}"     \
-	--tmppath "${GENIMAGE_TMP}"    \
-	--inputpath "${BINARIES_DIR}"  \
-	--outputpath "${BINARIES_DIR}" \
-	--config "${GENIMAGE_CFG}"

board/acmesystems/aria-g25/readme.txt

@@ -1,44 +1,51 @@
-Acme Systems Aria G25
-
 Build instructions
 ==================
 
-To build an image for the Aria G25 choose the configuration
-corresponding to the Aria variant.
+As a regular user configure and then build:
 
-For 128MB RAM variant type:
-
-$ make acmesystems_aria_g25_128mb_defconfig
-
-else for 256MB RAM variant type:
-
-$ make acmesystems_aria_g25_256mb_defconfig
-
-To customize the configuration choosed type:
-
-$ make menuconfig
-
-When you are ready to start building Buildroot type:
+$ make acmesystems_aria_g25_128mb_defconfig (128MB RAM variant)
+  or...
+$ make acmesystems_aria_g25_256mb_defconfig (256MB RAM variant)
 
 $ make
 
-How to write the microSD card
-=============================
+Writing to the MicroSD card
+===========================
 
-Once the build process is finished you will have an image called
-"sdcard.img" in the output/images/ directory.
+Assuming your Aria G25 baseboard has a MicroSD socket, for example with
+the Terra baseboard, you'll need a blank MicroSD (obviously) initialized
+in a particular way to be able to boot from it.
 
-Write the bootable SD card image "sdcard.img" onto an SD card with
-"dd" command:
+Assuming the card is seen as /dev/sdb in your PC/laptop/other device
+you'll need to run the following commands as root or via sudo.
 
-  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
+Make sure all of the card partitions are unmounted before starting.
 
-Assuming your Aria G25 baseboard has a MicroSD socket, for example
-with the Terra baseboard, insert the microSD card into the baseboard
-slot and power it.
+First we'll need to create two partitions:
 
-To get the kernel log messages you can use a DPI cable
-(http://www.acmesystems.it/DPI)
+# sfdisk -uM /dev/sdb <<EOF
+,32,6
+;
+EOF
+
+Then we'll need to create the empty filesystems:
+
+# mkdosfs -n SD_BOOT /dev/sdb1
+# mkfs.ext4 -L SD_ROOT /dev/sdb2
+
+We'll populate the first partition (boot) with the relevant files:
+
+# mount /dev/sdb1 /mnt
+# cp output/images/at91bootstrap.bin /mnt/BOOT.BIN
+# cp output/images/zImage /mnt
+# cp output/images/at91-ariag25.dtb /mnt
+# umount /mnt
+
+And the root filesystem afterwards:
+
+# mount /dev/sdb2 /mnt
+# tar -C /mnt output/images/rootfs.tar
+# umount /mnt
+
+You're done, insert the MicroSD card in the slot and enjoy.
 
-You can find additional informations, tutorials and a very
-comprehensive documentation on http://www.acmesystems.it/aria.

board/acmesystems/arietta-g25/genimage.cfg

@@ -1,18 +1,18 @@
 # Minimal SD card image for the Acmesystems Arietta G25
-
+#
 image boot.vfat {
 	vfat {
 		file zImage {
 			image = "zImage"
 		}
-		
+
 		file acme-arietta.dtb {
-			image = "at91-ariettag25.dtb"
+			image = "at91-ariag25.dtb"
 		}
-		
+
 		file boot.bin {
-			image = "at91sam9x5_arietta-sdcardboot-linux-zimage-dt-3.8.6.bin"
-		} 
+			image = "at91sam9x5_arietta-sdcardboot-linux-zimage-dt-3.7.bin"
+		}
 	}
 	size = 16M
 }

board/acmesystems/arietta-g25/post-image.sh

@@ -6,9 +6,11 @@ GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
 
 rm -rf "${GENIMAGE_TMP}"
 
-genimage  \
+genimage                               \
 	--rootpath "${TARGET_DIR}"     \
 	--tmppath "${GENIMAGE_TMP}"    \
 	--inputpath "${BINARIES_DIR}"  \
 	--outputpath "${BINARIES_DIR}" \
 	--config "${GENIMAGE_CFG}"
+
+exit $?

board/acmesystems/arietta-g25/readme.txt

@@ -1,4 +1,4 @@
-Acme Systems Arietta G25
+Acmesystems Arietta G25
 
 Intro
 =====
@@ -13,8 +13,8 @@ documentation on http://www.acmesystems.it/arietta.
 Build instructions
 ==================
 
-To build an image for the Arietta G25 choose the configuration
-corresponding to the Arietta variant.
+To build an image for the arietta g25 choose the configuration
+corresponding to the arietta variant.
 
 For 128MB RAM variant type:
 
@@ -24,11 +24,7 @@ else for 256MB RAM variant type:
 
 $ make acmesystems_arietta_g25_256mb_defconfig
 
-To customize the configuration chosen type:
-
-$ make menuconfig
-
-When you are ready to start building Buildroot type:
+then:
 
 $ make
 
@@ -42,7 +38,7 @@ Copy the bootable "sdcard.img" onto an SD card with "dd":
 
   $ sudo dd if=output/images/sdcard.img of=/dev/sdX
 
-Insert the microSD card into the Arietta slot and power it.
+Insert the microSD card into the arietta slot and power it.
 
 The image just built is fairly basic and the only output
 you will get is on serial console, please consider to use a DPI

board/altera/post-image.sh

@@ -0,0 +1,8 @@
+#!/bin/sh
+# post-image.sh for SoCkit/SoCDK
+# 2014, "Roman Diouskine" <roman.diouskine@savoirfairelinux.com>
+# 2014, "Sebastien Bourdelin" <sebastien.bourdelin@savoirfairelinux.com>
+
+# create a DTB file copy with the name expected by the u-boot config
+# Name of the DTB is passed as the second argument to the script.
+cp -af $BINARIES_DIR/${2}.dtb  $BINARIES_DIR/socfpga.dtb

board/altera/readme.txt

@@ -0,0 +1,165 @@
+SoCkit, SoC Development Kit
+
+Intro
+=====
+
+This is the buildroot board support for the Arrow SoCkit Evaluation Board
+and the Altera Cyclone 5 Development Board.
+
+A good source of information for Arrow SoCkit:
+http://www.rocketboards.org/foswiki/Documentation/ArrowSoCKitEvaluationBoard
+
+More information about SoC DK:
+https://www.altera.com/products/boards_and_kits/dev-kits/altera/kit-cyclone-v-soc.html
+
+How it works
+============
+
+Boot process:
+-------------
+
+In summary, the bootloader has multiple stages, an hardcoded boot routine is
+loaded from an on-chip ROM.
+
+  - That first stage is scanning the SD card's partition table to find
+    partition having the 0xA2 type.
+  - This partition is expected to contain a boot image on its first 60 Kb,
+    because u-boot is bigger, we must fill it with a preloader (u-boot-spl)
+    which will load the u-boot image.
+  - Then the u-boot image will load the Linux kernel.
+
+A good source of information for the boot process is:
+http://xillybus.com/tutorials/u-boot-image-altera-soc
+
+Note for the SPL:
+The SPL generated by the u-boot from Rocketboards doesn't seems to work,
+therefore we provide a patch for {uboot-PKG}/board/altera/socfpga_cyclone5/*
+based on the files generated with the Altera example design.
+
+For more information about this files please look at:
+http://www.rocketboards.org/foswiki/Documentation/PreloaderUbootCustomization#Common_Source_Code
+
+How to build it
+===============
+
+Configure Buildroot
+-------------------
+
+The altera_sockit_defconfig configuration is a minimal configuration with
+all that is required to bring the SoCkit:
+
+  $ make altera_sockit_defconfig
+
+and for the SoC Development Board:
+
+  $ make altera_sockdk_defconfig
+
+Build everything
+----------------
+
+Note: you will need to have access to the network, since Buildroot will
+download the packages' sources.
+
+  $ make
+
+Result of the build
+-------------------
+
+After building, you should obtain this tree:
+
+    output/images/
+    ├── rootfs.ext2
+    ├── rootfs.ext3 -> rootfs.ext2
+    ├── rootfs.tar
+    ├── socfpga_cyclone5_sockit.dtb or socfpga_cyclone5_socdk.dtb
+    ├── socfpga.dtb
+    ├── u-boot.img
+    ├── u-boot-spl.bin
+    └── uImage
+
+
+Signing the Preloader
+---------------------
+
+*** BEWARE ****
+The u-boot-spl.bin must be signed using the Altera's tool "mkpimage".
+This tool comes as a part of the Altera development environnment (SoC EDS).
+A fork of this tool have been done by Maxime Hadjinlian and can be found here:
+https://github.com/maximeh/mkpimage
+
+Remember that without signing the u-boot-spl.bin, the board will not boot !!!
+
+  $ mkpimage u-boot-spl.bin -o u-boot-spl-signed.bin
+
+Prepare your SDcard
+===================
+
+A good source of information for the partitioning process is:
+http://www.rocketboards.org/foswiki/view/Projects/SoCKitLinaroLinuxDesktop#Partition_the_SD_Card
+
+Create the SDcard partition table
+----------------------------------
+
+Determine the device associated to the SD card:
+
+  $ cat /proc/partitions
+
+let's assume it is /dev/mmcblk0:
+
+  $ sudo fdisk /dev/mmcblk0
+
+Delete all previous partitions with 'd' then create the new partition table,
+using these options, pressing enter after each one:
+
+  * n p 1 9000000 +20480K t 1 b
+  * n p 2 4096 +4496384K t 83
+  * n p 3 2048 +1024K t 3 a2
+
+Using the 'p' option, the SD card's partition must look like this:
+
+Device         Boot     Start       End  Blocks  Id System
+/dev/mmcblk0p1        9000000   9041919   20960   b W95 FAT32
+/dev/mmcblk0p2           4096   8996863 4496384  83 Linux
+/dev/mmcblk0p3           2048      4095    1024  a2 Unknown
+
+Then write the partition table using 'w' and exit.
+
+Make partition one a DOS partition:
+
+  $ sudo mkdosfs /dev/mmcblk0p1
+
+Install the binaries to the SDcard
+----------------------------------
+
+Remember your binaries are located in output/images/, go inside that directory:
+
+  $ cd output/images
+
+The partition with type a2 is the partition scan by the first bootloader stage
+in the SoCkit ROM to find the next bootloader stage so we must write the signed
+preloader and the u-boot binaries in that partition:
+
+  $ sudo dd if=u-boot-spl-signed.bin of=/dev/mmcblk0p3 bs=64k seek=0
+  $ sudo dd if=u-boot.img of=/dev/mmcblk0p3 bs=64k seek=4
+
+Copy the Linux kernel and its Device tree:
+
+  $ sudo mkdir /mnt/sdcard
+  $ sudo mount /dev/mmcblk0p1 /mnt/sdcard
+  $ sudo cp socfpga.dtb uImage /mnt/sdcard
+  $ sudo umount /mnt/sdcard
+
+Copy the rootfs:
+
+  $ sudo dd if=rootfs.ext2 of=/dev/mmcblk0p2 bs=64k
+  $ sudo sync
+
+It's Done!
+
+Finish
+======
+
+Eject your SDcard, insert it in your SoCkit, and power it up.
+
+if you want a serial console, you can plug a micro B USB cable on the USB-UART
+port, the serial port config to used is 57600/8-N-1.

board/altera/sockit/uboot-sockit-preloader-sample-design.patch

@@ -0,0 +1,820 @@
+From c70f2ebb350da20af1a0ed4b7960b8e5a1952713 Mon Sep 17 00:00:00 2001
+From: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
+Date: Thu, 20 Feb 2014 11:51:31 -0500
+Subject: [PATCH] board: add to sockit a working preloader design
+
+---
+ board/altera/socfpga_cyclone5/build.h              |   2 +-
+ board/altera/socfpga_cyclone5/iocsr_config.c       | 314 ++++++++++-----------
+ board/altera/socfpga_cyclone5/pinmux_config.c      |  32 +--
+ board/altera/socfpga_cyclone5/pinmux_config.h      |   8 +-
+ board/altera/socfpga_cyclone5/sdram/sdram_config.h |  14 +-
+ .../altera/socfpga_cyclone5/sdram/sequencer_auto.h |  16 +-
+ .../sdram/sequencer_auto_ac_init.c                 |  16 +-
+ .../socfpga_cyclone5/sdram/sequencer_defines.h     |  34 +--
+ 8 files changed, 218 insertions(+), 218 deletions(-)
+
+diff --git a/board/altera/socfpga_cyclone5/build.h b/board/altera/socfpga_cyclone5/build.h
+index e5d9c3c..a369015 100644
+--- a/board/altera/socfpga_cyclone5/build.h
++++ b/board/altera/socfpga_cyclone5/build.h
+@@ -29,7 +29,7 @@
+  * Handoff files must provide user option whether to
+  * enable watchdog during preloader execution phase
+  */
+-#define CONFIG_PRELOADER_WATCHDOG_ENABLE	(0)
++#define CONFIG_PRELOADER_WATCHDOG_ENABLE	(1)
+ 
+ /*
+  * Handoff files must provide user option whether to enable
+diff --git a/board/altera/socfpga_cyclone5/iocsr_config.c b/board/altera/socfpga_cyclone5/iocsr_config.c
+index fa663e1..90fc154 100644
+--- a/board/altera/socfpga_cyclone5/iocsr_config.c
++++ b/board/altera/socfpga_cyclone5/iocsr_config.c
+@@ -7,113 +7,113 @@ const unsigned long iocsr_scan_chain0_table[((CONFIG_HPS_IOCSR_SCANCHAIN0_LENGTH
+ 	0xC0000000,
+ 	0x0000003F,
+ 	0x00008000,
+-	0x00020080,
+-	0x08020000,
+-	0x08000000,
+-	0x00018020,
++	0x00060180,
++	0x18060000,
++	0x18000000,
++	0x00018060,
+ 	0x00000000,
+ 	0x00004000,
+-	0x00010040,
+-	0x04010000,
+-	0x04000000,
+-	0x00000010,
+-	0x00004010,
++	0x000300C0,
++	0x0C030000,
++	0x0C000000,
++	0x00000030,
++	0x0000C030,
+ 	0x00002000,
+-	0x00020000,
+-	0x02008000,
+-	0x02000000,
+-	0x00000008,
+-	0x00002008,
++	0x00018060,
++	0x06018000,
++	0x06000000,
++	0x00000018,
++	0x00006018,
+ 	0x00001000,
+ };
+ 
+ const unsigned long iocsr_scan_chain1_table[((CONFIG_HPS_IOCSR_SCANCHAIN1_LENGTH / 32) + 1)] = {
+-	0x000C0300,
+-	0x10040000,
+-	0x100000C0,
+-	0x00000040,
+-	0x00010040,
++	0x00100000,
++	0x300C0000,
++	0x300000C0,
++	0x000000C0,
++	0x000300C0,
+ 	0x00008000,
+ 	0x00080000,
+-	0x18060000,
+-	0x18000000,
+-	0x00000060,
+-	0x00018060,
++	0x20000000,
++	0x00000000,
++	0x00000080,
++	0x00020000,
+ 	0x00004000,
+-	0x00010040,
++	0x000300C0,
+ 	0x10000000,
+-	0x04000000,
+-	0x00000010,
+-	0x00004010,
++	0x0C000000,
++	0x00000030,
++	0x0000C030,
+ 	0x00002000,
+-	0x06008020,
+-	0x02008000,
++	0x06018060,
++	0x06018000,
+ 	0x01FE0000,
+ 	0xF8000000,
+ 	0x00000007,
+ 	0x00001000,
+-	0x00004010,
+-	0x01004000,
+-	0x01000000,
+-	0x00003004,
+-	0x00001004,
++	0x0000C030,
++	0x0300C000,
++	0x03000000,
++	0x0000300C,
++	0x0000300C,
+ 	0x00000800,
+ 	0x00000000,
+ 	0x00000000,
+-	0x00800000,
+-	0x00000002,
++	0x01800000,
++	0x00000006,
+ 	0x00002000,
+ 	0x00000400,
+ 	0x00000000,
+-	0x00401000,
++	0x00C03000,
+ 	0x00000003,
+ 	0x00000000,
+ 	0x00000000,
+ 	0x00000200,
+-	0x00600802,
++	0x00601806,
+ 	0x00000000,
+-	0x80200000,
+-	0x80000600,
+-	0x00000200,
++	0x80600000,
++	0x80000601,
++	0x00000601,
+ 	0x00000100,
+-	0x00300401,
+-	0xC0100400,
+-	0x40100000,
+-	0x40000300,
+-	0x000C0100,
++	0x00300C03,
++	0xC0300C00,
++	0xC0300000,
++	0xC0000300,
++	0x000C0300,
+ 	0x00000080,
+ };
+ 
+ const unsigned long iocsr_scan_chain2_table[((CONFIG_HPS_IOCSR_SCANCHAIN2_LENGTH / 32) + 1)] = {
+-	0x80040100,
++	0x300C0300,
+ 	0x00000000,
+ 	0x0FF00000,
+ 	0x00000000,
+-	0x0C010040,
++	0x0C0300C0,
+ 	0x00008000,
+-	0x18020080,
+-	0x00000000,
+-	0x08000000,
+-	0x00040020,
+-	0x06018060,
++	0x18060180,
++	0x18060000,
++	0x18000000,
++	0x00018060,
++	0x00018060,
+ 	0x00004000,
+-	0x0C010040,
+-	0x04010000,
++	0x000300C0,
++	0x0C030000,
+ 	0x00000030,
+ 	0x00000000,
+-	0x03004010,
++	0x0300C030,
+ 	0x00002000,
+-	0x06008020,
+-	0x02008000,
+-	0x02000018,
+-	0x00006008,
+-	0x01802008,
++	0x00018060,
++	0x06018000,
++	0x06000000,
++	0x00000018,
++	0x00006018,
+ 	0x00001000,
+-	0x03004010,
+-	0x01004000,
+-	0x0100000C,
+-	0x00003004,
+-	0x00C01004,
++	0x0000C030,
++	0x00000000,
++	0x03000000,
++	0x0000000C,
++	0x00C0300C,
+ 	0x00000800,
+ };
+ 
+@@ -170,14 +170,14 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0xA0000034,
+ 	0x0D000001,
+ 	0x6068030C,
+-	0xC7034018,
+-	0x0E381A01,
++	0xCF034059,
++	0x1E781A03,
+ 	0x8030C0D0,
+-	0x34018606,
+-	0x01A01C70,
++	0x34059606,
++	0x01A03CF0,
+ 	0x0C0D0000,
+-	0x18606803,
+-	0x01C70340,
++	0x59606803,
++	0x03CF0340,
+ 	0xD000001A,
+ 	0x068030C0,
+ 	0x10040000,
+@@ -244,15 +244,15 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0xA0000034,
+ 	0x0D000001,
+ 	0x6068030C,
+-	0xC7034018,
+-	0x0E381A01,
++	0xCF034059,
++	0x1E781A03,
+ 	0x8030C0D0,
+-	0x34018606,
++	0x34059606,
+ 	0x01A00000,
+ 	0x0C0D0000,
+-	0x18606803,
+-	0x01C70340,
+-	0xD00E381A,
++	0x59606803,
++	0x03CF0340,
++	0xD01E781A,
+ 	0x068030C0,
+ 	0x10040000,
+ 	0x00200000,
+@@ -273,7 +273,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0xAA0D4000,
+ 	0x01C3A810,
+ 	0xAA0D4000,
+-	0x01C3A808,
++	0x01C3A810,
+ 	0xAA0D4000,
+ 	0x01C3A810,
+ 	0x00040100,
+@@ -301,7 +301,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0x2A835000,
+ 	0x0070EA04,
+ 	0x2A835000,
+-	0x0070EA02,
++	0x0070EA04,
+ 	0x2A835000,
+ 	0x0070EA04,
+ 	0x00010040,
+@@ -321,15 +321,15 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0x14864000,
+ 	0x69A47A05,
+ 	0xCBCF23D7,
+-	0xF41E791E,
+-	0x034ED348,
++	0xF5DE791E,
++	0x0356D348,
+ 	0x821A0000,
+ 	0x0000D000,
+ 	0x01860680,
+ 	0xD769A47A,
+ 	0x1ECBCF23,
+-	0x48F41E79,
+-	0x00034ED3,
++	0x48F5DE79,
++	0x000356D3,
+ 	0x00080200,
+ 	0x00001000,
+ 	0x00080200,
+@@ -347,7 +347,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0xAA0D4000,
+ 	0x01C3A810,
+ 	0xAA0D4000,
+-	0x01C3A808,
++	0x01C3A810,
+ 	0xAA0D4000,
+ 	0x01C3A810,
+ 	0x00040100,
+@@ -375,7 +375,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0x2A835000,
+ 	0x0070EA04,
+ 	0x2A835000,
+-	0x0070EA02,
++	0x0070EA04,
+ 	0x2A835000,
+ 	0x0070EA04,
+ 	0x00015000,
+@@ -395,15 +395,15 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0x14864000,
+ 	0x69A47A05,
+ 	0xCBCF23D7,
+-	0xF41E791E,
+-	0x034ED348,
+-	0x821A00C3,
++	0xF5DE791E,
++	0x0356D348,
++	0x821A02CB,
+ 	0x0000D000,
+ 	0x00000680,
+ 	0xD769A47A,
+ 	0x1ECBCF23,
+-	0x48F41E79,
+-	0x00034ED3,
++	0x48F5DE79,
++	0x000356D3,
+ 	0x00080200,
+ 	0x00001000,
+ 	0x00080200,
+@@ -421,7 +421,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0xAA0D4000,
+ 	0x01C3A810,
+ 	0xAA0D4000,
+-	0x01C3A808,
++	0x01C3A810,
+ 	0xAA0D4000,
+ 	0x01C3A810,
+ 	0x00040100,
+@@ -449,7 +449,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0x2A835000,
+ 	0x0070EA04,
+ 	0x2A835000,
+-	0x0070EA02,
++	0x0070EA04,
+ 	0x2A835000,
+ 	0x0070EA04,
+ 	0x00010040,
+@@ -469,15 +469,15 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0x14864000,
+ 	0x69A47A05,
+ 	0xCBCF23D7,
+-	0xF41E791E,
+-	0x034ED348,
++	0xF5DE791E,
++	0x0356D348,
+ 	0x821A0000,
+ 	0x0000D000,
+ 	0x00000680,
+ 	0xD769A47A,
+ 	0x1ECBCF23,
+-	0x48F41E79,
+-	0x00034ED3,
++	0x48F5DE79,
++	0x000356D3,
+ 	0x00080200,
+ 	0x00001000,
+ 	0x00080200,
+@@ -495,7 +495,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0xAA0D4000,
+ 	0x01C3A810,
+ 	0xAA0D4000,
+-	0x01C3A808,
++	0x01C3A810,
+ 	0xAA0D4000,
+ 	0x01C3A810,
+ 	0x00040100,
+@@ -523,7 +523,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0x2A835000,
+ 	0x0070EA04,
+ 	0x2A835000,
+-	0x0070EA02,
++	0x0070EA04,
+ 	0x2A835000,
+ 	0x0070EA04,
+ 	0x00010040,
+@@ -543,15 +543,15 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0x14864000,
+ 	0x69A47A05,
+ 	0xCBCF23D7,
+-	0xF41E791E,
+-	0x034ED348,
++	0xF5DE791E,
++	0x0356D348,
+ 	0x821A0000,
+ 	0x0000D000,
+ 	0x00000680,
+ 	0xD769A47A,
+ 	0x1ECBCF23,
+-	0x48F41E79,
+-	0x00034ED3,
++	0x48F5DE79,
++	0x000356D3,
+ 	0x00080200,
+ 	0x00001000,
+ 	0x00080200,
+@@ -567,80 +567,80 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0x04000002,
+ 	0x00820000,
+ 	0x00489000,
+-	0x001A1A1A,
+-	0x085506A0,
+-	0x0000E1D4,
+-	0x045506A0,
+-	0x0000E1D4,
+-	0x085506A0,
+-	0x8000E1D4,
++	0x801A1A1A,
++	0x00000200,
++	0x80000004,
++	0x00000200,
++	0x80000004,
++	0x00000200,
++	0x80000004,
+ 	0x00000200,
+ 	0x00000004,
+-	0x04000000,
+-	0x00000009,
+-	0x00002410,
++	0x00040000,
++	0x10000000,
++	0x00000000,
+ 	0x00000040,
+-	0x41000000,
+-	0x00002082,
+-	0x00000350,
+-	0x000000DA,
++	0x00010000,
++	0x40002000,
++	0x00000100,
++	0x40000002,
++	0x00000100,
++	0x40000002,
+ 	0x00000100,
+ 	0x40000002,
+ 	0x00000100,
+ 	0x00000002,
+-	0x042A8350,
+-	0x000070EA,
+-	0x86000000,
+-	0x08000004,
++	0x00020000,
++	0x08000000,
+ 	0x00000000,
+-	0x00482000,
+-	0x21800000,
+-	0x00101061,
+-	0x021541A8,
+-	0x00003875,
+-	0x011541A8,
+-	0x00003875,
+-	0x021541A8,
+-	0x20003875,
++	0x00000020,
++	0x00008000,
++	0x20001000,
++	0x00000080,
++	0x20000001,
++	0x00000080,
++	0x20000001,
++	0x00000080,
++	0x20000001,
+ 	0x00000080,
+ 	0x00000001,
+-	0x41000000,
+-	0x00000002,
+-	0x00FF0904,
++	0x00010000,
++	0x04000000,
++	0x00FF0000,
+ 	0x00000000,
+-	0x90400000,
+-	0x00000820,
++	0x00004000,
++	0x00000800,
+ 	0x80000001,
+-	0x38D612AF,
+-	0x86F8E38E,
+-	0x0A0A78B4,
+-	0x000D020A,
++	0x00041419,
++	0x40000000,
++	0x04000816,
++	0x000D0000,
+ 	0x00006800,
+-	0x028A4320,
+-	0xEBB4D23D,
+-	0x8F65E791,
+-	0xA47A0F3C,
+-	0x0001A769,
+-	0x00410D00,
++	0x00000340,
++	0xD000001A,
++	0x06800000,
++	0x00340000,
++	0x0001A000,
++	0x00000D00,
+ 	0x40000068,
+-	0x3D000003,
+-	0x91EBB4D2,
+-	0x3C8F65E7,
+-	0x69A47A0F,
+-	0x000001A7,
++	0x1A000003,
++	0x00D00000,
++	0x00068000,
++	0x00003400,
++	0x000001A0,
++	0x00000401,
++	0x00000008,
+ 	0x00000401,
+ 	0x00000008,
+ 	0x00000401,
+ 	0x00000008,
+-	0x00000540,
+-	0x000003A8,
+-	0x10AA0D40,
+-	0x8001C3A8,
++	0x00000401,
++	0x80000008,
+ 	0x0000007F,
++	0x20000000,
+ 	0x00000000,
+-	0x00004060,
+-	0xE1208000,
++	0xE0000080,
+ 	0x0000001F,
+-	0x00004100,
++	0x00004000,
+ };
+ 
+diff --git a/board/altera/socfpga_cyclone5/pinmux_config.c b/board/altera/socfpga_cyclone5/pinmux_config.c
+index 730067e..cfd74cd 100644
+--- a/board/altera/socfpga_cyclone5/pinmux_config.c
++++ b/board/altera/socfpga_cyclone5/pinmux_config.c
+@@ -23,7 +23,7 @@ unsigned long sys_mgr_init_table[CONFIG_HPS_PINMUX_NUM] = {
+ 	0, /* EMACIO18 */
+ 	0, /* EMACIO19 */
+ 	3, /* FLASHIO0 */
+-	3, /* FLASHIO1 */
++	0, /* FLASHIO1 */
+ 	3, /* FLASHIO2 */
+ 	3, /* FLASHIO3 */
+ 	0, /* FLASHIO4 */
+@@ -34,25 +34,25 @@ unsigned long sys_mgr_init_table[CONFIG_HPS_PINMUX_NUM] = {
+ 	3, /* FLASHIO9 */
+ 	3, /* FLASHIO10 */
+ 	3, /* FLASHIO11 */
+-	3, /* GENERALIO0 */
+-	3, /* GENERALIO1 */
+-	3, /* GENERALIO2 */
+-	3, /* GENERALIO3 */
+-	3, /* GENERALIO4 */
+-	3, /* GENERALIO5 */
+-	3, /* GENERALIO6 */
+-	3, /* GENERALIO7 */
+-	3, /* GENERALIO8 */
++	0, /* GENERALIO0 */
++	1, /* GENERALIO1 */
++	1, /* GENERALIO2 */
++	1, /* GENERALIO3 */
++	1, /* GENERALIO4 */
++	0, /* GENERALIO5 */
++	0, /* GENERALIO6 */
++	0, /* GENERALIO7 */
++	0, /* GENERALIO8 */
+ 	3, /* GENERALIO9 */
+ 	3, /* GENERALIO10 */
+ 	3, /* GENERALIO11 */
+ 	3, /* GENERALIO12 */
+-	2, /* GENERALIO13 */
+-	2, /* GENERALIO14 */
+-	3, /* GENERALIO15 */
+-	3, /* GENERALIO16 */
+-	2, /* GENERALIO17 */
+-	2, /* GENERALIO18 */
++	0, /* GENERALIO13 */
++	0, /* GENERALIO14 */
++	1, /* GENERALIO15 */
++	1, /* GENERALIO16 */
++	1, /* GENERALIO17 */
++	1, /* GENERALIO18 */
+ 	0, /* GENERALIO19 */
+ 	0, /* GENERALIO20 */
+ 	0, /* GENERALIO21 */
+diff --git a/board/altera/socfpga_cyclone5/pinmux_config.h b/board/altera/socfpga_cyclone5/pinmux_config.h
+index fb483ab..64c750a 100644
+--- a/board/altera/socfpga_cyclone5/pinmux_config.h
++++ b/board/altera/socfpga_cyclone5/pinmux_config.h
+@@ -11,15 +11,15 @@
+ #define CONFIG_HPS_UART0 (1)
+ #define CONFIG_HPS_UART1 (0)
+ #define CONFIG_HPS_TRACE (0)
+-#define CONFIG_HPS_I2C0 (1)
+-#define CONFIG_HPS_I2C1 (0)
++#define CONFIG_HPS_I2C0 (0)
++#define CONFIG_HPS_I2C1 (1)
+ #define CONFIG_HPS_I2C2 (0)
+ #define CONFIG_HPS_I2C3 (0)
+ #define CONFIG_HPS_SPIM0 (1)
+-#define CONFIG_HPS_SPIM1 (0)
++#define CONFIG_HPS_SPIM1 (1)
+ #define CONFIG_HPS_SPIS0 (0)
+ #define CONFIG_HPS_SPIS1 (0)
+-#define CONFIG_HPS_CAN0 (1)
++#define CONFIG_HPS_CAN0 (0)
+ #define CONFIG_HPS_CAN1 (0)
+ 
+ #define CONFIG_HPS_SDMMC_BUSWIDTH (4)
+diff --git a/board/altera/socfpga_cyclone5/sdram/sdram_config.h b/board/altera/socfpga_cyclone5/sdram/sdram_config.h
+index b90d6f3..dd027ef 100755
+--- a/board/altera/socfpga_cyclone5/sdram/sdram_config.h
++++ b/board/altera/socfpga_cyclone5/sdram/sdram_config.h
+@@ -4,16 +4,16 @@
+ #define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_MEMTYPE			(2)
+ #define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_MEMBL			(8)
+ #define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ADDRORDER		(0)
+-#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ECCEN			(1)
+-#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ECCCORREN		(1)
++#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ECCEN			(0)
++#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ECCCORREN		(0)
+ #define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_REORDEREN		(1)
+ #define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_STARVELIMIT		(10)
+ #define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_DQSTRKEN			(0)
+ #define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_NODMPINS			(0)
+-#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCWL			(6)
++#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCWL			(8)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_AL			(0)
+-#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCL			(7)
+-#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRRD			(4)
++#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCL			(11)
++#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRRD			(3)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TFAW			(12)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRFC			(104)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TREFI		(3120)
+@@ -21,7 +21,7 @@
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TRP		(6)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TWR		(6)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TWTR		(4)
+-#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRTP			(4)
++#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRTP			(3)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRAS			(14)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRC			(20)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TMRD			(4)
+@@ -33,7 +33,7 @@
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_ROWBITS		(15)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_BANKBITS		(3)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_CSBITS			(1)
+-#define CONFIG_HPS_SDR_CTRLCFG_DRAMIFWIDTH_IFWIDTH		(40)
++#define CONFIG_HPS_SDR_CTRLCFG_DRAMIFWIDTH_IFWIDTH		(32)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMDEVWIDTH_DEVWIDTH		(8)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMINTR_INTREN			(0)
+ #define CONFIG_HPS_SDR_CTRLCFG_STATICCFG_MEMBL			(2)
+diff --git a/board/altera/socfpga_cyclone5/sdram/sequencer_auto.h b/board/altera/socfpga_cyclone5/sdram/sequencer_auto.h
+index e8c5484..919676d 100644
+--- a/board/altera/socfpga_cyclone5/sdram/sequencer_auto.h
++++ b/board/altera/socfpga_cyclone5/sdram/sequencer_auto.h
+@@ -34,7 +34,7 @@
+ #define __RW_MGR_ac_read_en 0x21
+ #define __RW_MGR_ac_mrs3_mirr 0x0C
+ #define __RW_MGR_ac_mrs2 0x05
+-#define __RW_MGR_CONTENT_ac_mrs1 0x10090044
++#define __RW_MGR_CONTENT_ac_mrs1 0x10090006
+ #define __RW_MGR_CONTENT_ac_mrs3 0x100B0000
+ #define __RW_MGR_CONTENT_ac_write_bank_0_col_0_nodata_wl_1 0x18980000
+ #define __RW_MGR_CONTENT_ac_act_1 0x106B0000
+@@ -46,8 +46,8 @@
+ #define __RW_MGR_CONTENT_ac_init_reset_0_cke_0 0x20700000
+ #define __RW_MGR_CONTENT_ac_read_bank_0_1_norden 0x10580008
+ #define __RW_MGR_CONTENT_ac_pre_all 0x10280400
+-#define __RW_MGR_CONTENT_ac_mrs0_user 0x10080431
+-#define __RW_MGR_CONTENT_ac_mrs0_dll_reset 0x10080530
++#define __RW_MGR_CONTENT_ac_mrs0_user 0x10080471
++#define __RW_MGR_CONTENT_ac_mrs0_dll_reset 0x10080570
+ #define __RW_MGR_CONTENT_ac_read_bank_0_0 0x13580000
+ #define __RW_MGR_CONTENT_ac_write_bank_0_col_1 0x1C980008
+ #define __RW_MGR_CONTENT_ac_read_bank_0_1 0x13580008
+@@ -55,21 +55,21 @@
+ #define __RW_MGR_CONTENT_ac_write_bank_1_col_1 0x1C9B0008
+ #define __RW_MGR_CONTENT_ac_write_bank_0_col_0 0x1C980000
+ #define __RW_MGR_CONTENT_ac_read_bank_1_0 0x135B0000
+-#define __RW_MGR_CONTENT_ac_mrs1_mirr 0x100A0024
++#define __RW_MGR_CONTENT_ac_mrs1_mirr 0x100A0006
+ #define __RW_MGR_CONTENT_ac_read_bank_1_1 0x135B0008
+ #define __RW_MGR_CONTENT_ac_des_odt_1 0x38780000
+-#define __RW_MGR_CONTENT_ac_mrs0_dll_reset_mirr 0x100804C8
++#define __RW_MGR_CONTENT_ac_mrs0_dll_reset_mirr 0x100804E8
+ #define __RW_MGR_CONTENT_ac_zqcl 0x10380400
+ #define __RW_MGR_CONTENT_ac_write_predata 0x38F80000
+-#define __RW_MGR_CONTENT_ac_mrs0_user_mirr 0x10080449
++#define __RW_MGR_CONTENT_ac_mrs0_user_mirr 0x10080469
+ #define __RW_MGR_CONTENT_ac_ref 0x10480000
+ #define __RW_MGR_CONTENT_ac_nop 0x30780000
+ #define __RW_MGR_CONTENT_ac_rdimm 0x10780000
+-#define __RW_MGR_CONTENT_ac_mrs2_mirr 0x10090010
++#define __RW_MGR_CONTENT_ac_mrs2_mirr 0x10090218
+ #define __RW_MGR_CONTENT_ac_write_bank_0_col_0_nodata 0x18180000
+ #define __RW_MGR_CONTENT_ac_read_en 0x33780000
+ #define __RW_MGR_CONTENT_ac_mrs3_mirr 0x100B0000
+-#define __RW_MGR_CONTENT_ac_mrs2 0x100A0008
++#define __RW_MGR_CONTENT_ac_mrs2 0x100A0218
+ 
+ #define __RW_MGR_READ_B2B_WAIT2 0x6A
+ #define __RW_MGR_LFSR_WR_RD_BANK_0_WAIT 0x31
+diff --git a/board/altera/socfpga_cyclone5/sdram/sequencer_auto_ac_init.c b/board/altera/socfpga_cyclone5/sdram/sequencer_auto_ac_init.c
+index e16efa1..20b4ca1 100644
+--- a/board/altera/socfpga_cyclone5/sdram/sequencer_auto_ac_init.c
++++ b/board/altera/socfpga_cyclone5/sdram/sequencer_auto_ac_init.c
+@@ -6,16 +6,16 @@ const alt_u32 ac_rom_init[36] =
+ {
+ 	0x20700000,
+ 	0x20780000,
+-	0x10080431,
+-	0x10080530,
+-	0x10090044,
+-	0x100a0008,
++	0x10080471,
++	0x10080570,
++	0x10090006,
++	0x100a0218,
+ 	0x100b0000,
+ 	0x10380400,
+-	0x10080449,
+-	0x100804c8,
+-	0x100a0024,
+-	0x10090010,
++	0x10080469,
++	0x100804e8,
++	0x100a0006,
++	0x10090218,
+ 	0x100b0000,
+ 	0x30780000,
+ 	0x38780000,
+diff --git a/board/altera/socfpga_cyclone5/sdram/sequencer_defines.h b/board/altera/socfpga_cyclone5/sdram/sequencer_defines.h
+index 52faf3f..b85b85c 100644
+--- a/board/altera/socfpga_cyclone5/sdram/sequencer_defines.h
++++ b/board/altera/socfpga_cyclone5/sdram/sequencer_defines.h
+@@ -1,28 +1,28 @@
+ #ifndef _SEQUENCER_DEFINES_H_
+ #define _SEQUENCER_DEFINES_H_
+ 
+-#define AC_ROM_MR1_MIRR 0000000100100
++#define AC_ROM_MR1_MIRR 0000000000110
+ #define AC_ROM_MR1_OCD_ENABLE
+-#define AC_ROM_MR2_MIRR 0000000010000
++#define AC_ROM_MR2_MIRR 0001000011000
+ #define AC_ROM_MR3_MIRR 0000000000000
+ #define AC_ROM_MR0_CALIB
+-#define AC_ROM_MR0_DLL_RESET_MIRR 0010011001000
+-#define AC_ROM_MR0_DLL_RESET 0010100110000
+-#define AC_ROM_MR0_MIRR 0010001001001
+-#define AC_ROM_MR0 0010000110001
+-#define AC_ROM_MR1 0000001000100
+-#define AC_ROM_MR2 0000000001000
++#define AC_ROM_MR0_DLL_RESET_MIRR 0010011101000
++#define AC_ROM_MR0_DLL_RESET 0010101110000
++#define AC_ROM_MR0_MIRR 0010001101001
++#define AC_ROM_MR0 0010001110001
++#define AC_ROM_MR1 0000000000110
++#define AC_ROM_MR2 0001000011000
+ #define AC_ROM_MR3 0000000000000
+ #define AFI_CLK_FREQ 401
+ #define AFI_RATE_RATIO 1
+ #define ARRIAVGZ 0
+ #define ARRIAV 0
+-#define AVL_CLK_FREQ 67
++#define AVL_CLK_FREQ 81
+ #define BFM_MODE 0
+ #define BURST2 0
+ #define CALIBRATE_BIT_SLIPS 0
+-#define CALIB_LFIFO_OFFSET 7
+-#define CALIB_VFIFO_OFFSET 5
++#define CALIB_LFIFO_OFFSET 11
++#define CALIB_VFIFO_OFFSET 9
+ #define CYCLONEV 1
+ #define DDR2 0
+ #define DDR3 1
+@@ -89,20 +89,20 @@
+ #define RW_MGR_MEM_CHIP_SELECT_WIDTH 1
+ #define RW_MGR_MEM_CLK_EN_WIDTH 1
+ #define RW_MGR_MEM_CONTROL_WIDTH 1
+-#define RW_MGR_MEM_DATA_MASK_WIDTH 5
+-#define RW_MGR_MEM_DATA_WIDTH 40
++#define RW_MGR_MEM_DATA_MASK_WIDTH 4
++#define RW_MGR_MEM_DATA_WIDTH 32
+ #define RW_MGR_MEM_DQ_PER_READ_DQS 8
+ #define RW_MGR_MEM_DQ_PER_WRITE_DQS 8
+-#define RW_MGR_MEM_IF_READ_DQS_WIDTH 5
+-#define RW_MGR_MEM_IF_WRITE_DQS_WIDTH 5
++#define RW_MGR_MEM_IF_READ_DQS_WIDTH 4
++#define RW_MGR_MEM_IF_WRITE_DQS_WIDTH 4
+ #define RW_MGR_MEM_NUMBER_OF_CS_PER_DIMM 1
+ #define RW_MGR_MEM_NUMBER_OF_RANKS 1
+ #define RW_MGR_MEM_ODT_WIDTH 1
+ #define RW_MGR_MEM_VIRTUAL_GROUPS_PER_READ_DQS 1
+ #define RW_MGR_MEM_VIRTUAL_GROUPS_PER_WRITE_DQS 1
+ #define RW_MGR_MR0_BL 1
+-#define RW_MGR_MR0_CAS_LATENCY 3
+-#define RW_MGR_TRUE_MEM_DATA_MASK_WIDTH 5
++#define RW_MGR_MR0_CAS_LATENCY 7
++#define RW_MGR_TRUE_MEM_DATA_MASK_WIDTH 4
+ #define RW_MGR_WRITE_TO_DEBUG_READ 1.0
+ #define SKEW_CALIBRATION 0
+ #define STATIC_FULL_CALIBRATION 1
+-- 
+1.9.0
+

board/altera/socrates_cyclone5/boot-env.txt

@@ -1,8 +0,0 @@
-linux_load_address=0x100000
-linux_dtb_load_address=0x100
-linux_dtb=socfpga_cyclone5_socrates.dtb
-linux_load=mmc rescan; fatload mmc 0:1 ${linux_load_address} zImage; fatload mmc 0:1 ${linux_dtb_load_address} ${linux_dtb}
-bootargs=console=ttyS0,115200 root=/dev/mmcblk0p3 ro rootwait
-source_env=fatload mmc 0:1 0x2000000 boot.scr; source 0x2000000
-bootcmd=run linux_load; bootz ${linux_load_address} - ${linux_dtb_load_address}
-bootdelay=1

board/altera/socrates_cyclone5/genimage.cfg

@@ -1,58 +0,0 @@
-image boot.vfat {
-	vfat {
-		files = {
-			"zImage",
-			"socfpga_cyclone5_socrates.dtb"
-		}
-	}
-	size = 8M
-}
-
-image uboot.img {
-	hdimage {
-		partition-table = "no"
-	}
-
-	partition spl {
-		in-partition-table = "no"
-		image = "u-boot-spl.bin.crc"
-		offset = 0
-		size = 64k
-	}
-
-	partition uboot-full {
-		in-partition-table = "no"
-		image = "u-boot.img"
-		offset = 256k
-	}
-
-	size = 1M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition uboot-env {
-		in-partition-table = "no"
-		image = "uboot-env.bin"
-		offset = 17408 # 512 * 34 -> just after gpt
-	}
-
-	partition boot {
-		partition-type = 0xc
-		bootable = "true"
-		image = "boot.vfat"
-	}
-
-	partition uboot {
-		partition-type = 0xa2
-		image = "uboot.img"
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext2"
-		size = 500M
-	}
-}

board/altera/socrates_cyclone5/readme.txt

@@ -1,52 +0,0 @@
-EBV SoCrates Evaluation Board
-
-Intro
-=====
-
-More information about this board can be found here:
-https://rocketboards.org/foswiki/Documentation/EBVSoCratesEvaluationBoard
-
-Build
-=====
-
-First, load socrates config for buildroot
-
-    make socrates_cyclone5_defconfig
-
-Build everything
-
-    make
-
-Following files will be generated in output/images
-
-.
-├── boot.vfat
-├── rootfs.ext2
-├── rootfs.ext4 -> rootfs.ext2
-├── rootfs.tar
-├── sdcard.img
-├── socfpga_cyclone5_socrates.dtb
-├── u-boot-spl.bin
-├── u-boot-spl.bin.crc
-├── u-boot.bin
-├── u-boot.img
-├── uboot-env.bin
-├── uboot.img
-└── zImage
-
-
-Creating bootable SD card
-=========================
-
-Simply invoke
-
-dd if=output/images/sdcard.img of=/dev/sdX
-
-Where X is your SD card device (not partition)
-
-Booting
-=======
-
-Pins 6:8 on P18 selector is used to determine boot device. To boot socrates from
-sdcard set these pins to value 0x5 (101b). Remaining pins are used to determine
-how to configure FPGA and are not associated with booting into Linux kernel.

board/arcturus/ppc-ucp1020/patches/linux/0003-powerpc-ptrace-Fix-out-of-bounds-array-access-warning.patch

@@ -1,53 +0,0 @@
-From 35b7ce4f8f290794d3b89db7461e8c568b5defa1 Mon Sep 17 00:00:00 2001
-From: Khem Raj <raj.khem@gmail.com>
-Date: Mon, 25 Apr 2016 09:19:17 -0700
-Subject: powerpc/ptrace: Fix out of bounds array access warning
-
-commit 1e407ee3b21f981140491d5b8a36422979ca246f upstream.
-
-gcc-6 correctly warns about a out of bounds access
-
-arch/powerpc/kernel/ptrace.c:407:24: warning: index 32 denotes an offset greater than size of 'u64[32][1] {aka long long unsigned int[32][1]}' [-Warray-bounds]
-        offsetof(struct thread_fp_state, fpr[32][0]));
-                        ^
-
-check the end of array instead of beginning of next element to fix this
-
-Signed-off-by: Khem Raj <raj.khem@gmail.com>
-Cc: Kees Cook <keescook@chromium.org>
-Cc: Michael Ellerman <mpe@ellerman.id.au>
-Cc: Segher Boessenkool <segher@kernel.crashing.org>
-Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
-Acked-by: Olof Johansson <olof@lixom.net>
-Cc: Arnd Bergmann <arnd@arndb.de>
-Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-Signed-off-by: Oleksandr Zhadan <oleks@arcturusnetworks.com>
----
- arch/powerpc/kernel/ptrace.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
-index f21897b..93f200f 100644
---- a/arch/powerpc/kernel/ptrace.c
-+++ b/arch/powerpc/kernel/ptrace.c
-@@ -376,7 +376,7 @@ static int fpr_get(struct task_struct *target, const struct user_regset *regset,
- 
- #else
- 	BUILD_BUG_ON(offsetof(struct thread_fp_state, fpscr) !=
--		     offsetof(struct thread_fp_state, fpr[32][0]));
-+		     offsetof(struct thread_fp_state, fpr[32]));
- 
- 	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
- 				   &target->thread.fp_state, 0, -1);
-@@ -404,7 +404,7 @@ static int fpr_set(struct task_struct *target, const struct user_regset *regset,
- 	return 0;
- #else
- 	BUILD_BUG_ON(offsetof(struct thread_fp_state, fpscr) !=
--		     offsetof(struct thread_fp_state, fpr[32][0]));
-+		     offsetof(struct thread_fp_state, fpr[32]));
- 
- 	return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- 				  &target->thread.fp_state, 0, -1);
--- 
-cgit v1.1

board/arm/juno/readme.txt

@@ -8,8 +8,8 @@ These instructions apply to all models of the ARM Juno:
   - Juno r1 (supports PCIe)
   - Juno r2 (Big Cluster with A72)
 
-Buildroot will generate the kernel image, device tree blob, bootloader binaries
-and a minimal root filesystem.
+Buildroot will generate the kernel image, device tree blob and a
+minimal root filesystem.
 
 How to build it
 ===============
@@ -44,20 +44,6 @@ After building, you should obtain this tree:
     +-- juno-r1.dtb (if Juno r1 is used)
     +-- juno-r2.dtb (if Juno r2 is used)
     +-- Image
-    +-- bl1.bin
-    +-- bl2.bin
-    +-- bl2u.bin
-    +-- bl31.bin
-    +-- fip.bin
-    +-- scp-fw.bin
-    +-- u-boot.bin
-
-Preparing your rootfs
-======================
-
-Format your pen drive as a ext3 filesystem by executing:
-
-   $ mkfs.ext3 /dev/<your device>
 
 Preparing your rootfs
 ======================
@@ -127,8 +113,7 @@ Installing kernel image and DTB
 3. Open the software/ folder
 4. Copy the 'Image' file to software/
 5. Copy the 'juno-r1.dtb' (r1), 'juno.dtb' (r0) or juno-r2.dtb (r2) file to software/
-6. Copy the bootloader binaries (bl1.bin and fip.bin) to software/
-7. Press the red button in the front pannel of ARM Juno
+6. Press the red button in the front pannel of ARM Juno
 
 At this time, the board will erase the Flash entry for each new item and
 replace it with the lastest ones.

board/armadeus/apf27/linux-3.18.config

@@ -0,0 +1,224 @@
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CGROUPS=y
+CONFIG_EMBEDDED=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_ARCH_MULTI_V7 is not set
+CONFIG_ARCH_MXC=y
+CONFIG_MACH_IMX27_DT=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_PM_DEBUG=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+CONFIG_IPV6=y
+CONFIG_CAN=m
+CONFIG_CAN_VCAN=m
+CONFIG_CAN_MCP251X=m
+CONFIG_BT=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_HIDP=m
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_CFG80211=m
+CONFIG_MAC80211=m
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+# CONFIG_MTD_CFI_I2 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_MXC=y
+CONFIG_MTD_UBI=y
+CONFIG_EEPROM_AT24=y
+CONFIG_EEPROM_AT25=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_SMSC_PHY=y
+CONFIG_RTL8187=m
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_RT2X00=m
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RTL8192CU=m
+CONFIG_ZD1211RW=m
+CONFIG_INPUT_JOYDEV=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_IMX=m
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_IMX=y
+CONFIG_SPI=y
+CONFIG_SPI_IMX=y
+CONFIG_SPI_SPIDEV=m
+CONFIG_GPIO_SYSFS=y
+CONFIG_W1=y
+CONFIG_W1_MASTER_MXC=y
+CONFIG_W1_SLAVE_THERM=y
+CONFIG_WATCHDOG=y
+CONFIG_IMX2_WDT=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_MEDIA_SUPPORT=m
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_USB_SUPPORT=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_PWC=m
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_SOC_CAMERA=m
+CONFIG_VIDEO_MX2=m
+# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
+# CONFIG_DVB_AU8522_V4L is not set
+# CONFIG_DVB_TUNER_DIB0070 is not set
+# CONFIG_DVB_TUNER_DIB0090 is not set
+CONFIG_FB=y
+# CONFIG_FB_MX3 is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_SOUND=m
+CONFIG_SND=m
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=m
+CONFIG_SND_IMX_SOC=m
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_MXC=y
+CONFIG_USB_ACM=y
+CONFIG_USB_PRINTER=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_USB_CHIPIDEA_DEBUG=y
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_FTDI_SIO=y
+CONFIG_USB_SERIAL_PL2303=y
+CONFIG_USB_ULPI=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=m
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_USB_G_HID=m
+CONFIG_MMC=y
+CONFIG_MMC_MXC=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_LEDS_TRIGGER_TRANSIENT=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_DS1374=y
+CONFIG_RTC_DRV_MXC=m
+CONFIG_DMADEVICES=y
+CONFIG_IMX_SDMA=y
+CONFIG_IMX_DMA=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_IIO=y
+CONFIG_MAX1027=y
+CONFIG_MAX5821=y
+CONFIG_PWM=y
+CONFIG_PWM_IMX=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_DNOTIFY is not set
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_UBIFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_15=m
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_FS=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_LL=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y

board/armadeus/apf27/linux-4.12.config

@@ -1,216 +0,0 @@
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CGROUPS=y
-CONFIG_EMBEDDED=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_MXC=y
-CONFIG_MACH_IMX27_DT=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_PM_DEBUG=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-CONFIG_CAN=m
-CONFIG_CAN_VCAN=m
-CONFIG_CAN_MCP251X=m
-CONFIG_BT=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_HIDP=m
-CONFIG_BT_HCIBTUSB=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_CFG80211=m
-CONFIG_MAC80211=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-# CONFIG_MTD_CFI_I2 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_MXC=y
-CONFIG_MTD_UBI=y
-CONFIG_EEPROM_AT24=y
-CONFIG_EEPROM_AT25=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_CIRRUS is not set
-# CONFIG_NET_VENDOR_FARADAY is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_MICROCHIP is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_NET_VENDOR_SEEQ is not set
-# CONFIG_NET_VENDOR_SMSC is not set
-# CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_WIZNET is not set
-CONFIG_SMSC_PHY=y
-CONFIG_LIBERTAS=m
-CONFIG_LIBERTAS_SDIO=m
-CONFIG_RT2X00=m
-CONFIG_RT2500USB=m
-CONFIG_RT73USB=m
-CONFIG_RT2800USB=m
-CONFIG_RTL8187=m
-CONFIG_RTL8192CU=m
-CONFIG_ZD1211RW=m
-CONFIG_INPUT_JOYDEV=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_IMX=m
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_JOYSTICK=y
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_IMX=y
-CONFIG_SPI=y
-CONFIG_SPI_IMX=y
-CONFIG_SPI_SPIDEV=m
-CONFIG_GPIO_SYSFS=y
-CONFIG_W1=y
-CONFIG_W1_MASTER_MXC=y
-CONFIG_W1_SLAVE_THERM=y
-CONFIG_WATCHDOG=y
-CONFIG_IMX2_WDT=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_MEDIA_SUPPORT=m
-CONFIG_MEDIA_CAMERA_SUPPORT=y
-CONFIG_MEDIA_USB_SUPPORT=y
-CONFIG_USB_VIDEO_CLASS=m
-CONFIG_USB_PWC=m
-CONFIG_V4L_PLATFORM_DRIVERS=y
-CONFIG_SOC_CAMERA=m
-# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
-CONFIG_FB=y
-# CONFIG_FB_MX3 is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_SOUND=m
-CONFIG_SND=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_USB is not set
-CONFIG_SND_SOC=m
-CONFIG_SND_IMX_SOC=m
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_MXC=y
-CONFIG_USB_ACM=y
-CONFIG_USB_PRINTER=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_CHIPIDEA=y
-CONFIG_USB_CHIPIDEA_HOST=y
-CONFIG_USB_SERIAL=y
-CONFIG_USB_SERIAL_FTDI_SIO=y
-CONFIG_USB_SERIAL_PL2303=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_MASS_STORAGE=m
-CONFIG_USB_G_HID=m
-CONFIG_MMC=y
-CONFIG_MMC_MXC=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_ONESHOT=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_LEDS_TRIGGER_TRANSIENT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_DS1374=y
-CONFIG_RTC_DRV_MXC=m
-CONFIG_DMADEVICES=y
-CONFIG_IMX_DMA=y
-CONFIG_IMX_SDMA=y
-# CONFIG_IOMMU_SUPPORT is not set
-CONFIG_IIO=y
-CONFIG_MAX1027=y
-CONFIG_MAX5821=y
-CONFIG_PWM=y
-CONFIG_PWM_IMX=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_DNOTIFY is not set
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_UBIFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=m
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_FS=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_LL=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y

board/armadeus/apf28/linux-3.12.config

@@ -0,0 +1,185 @@
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_EMBEDDED=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_BSD_DISKLABEL=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_ARCH_MULTI_V7 is not set
+CONFIG_ARCH_MXS=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CPU_IDLE=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+CONFIG_IPV6=y
+CONFIG_CAN=m
+CONFIG_CAN_VCAN=m
+CONFIG_CAN_FLEXCAN=m
+CONFIG_BT=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+CONFIG_BT_HCIBTUSB=m
+CONFIG_CFG80211=m
+CONFIG_MAC80211=m
+CONFIG_MAC80211_RC_PID=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_FW_LOADER=m
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_M25P80=y
+# CONFIG_M25PXX_USE_FAST_READ is not set
+CONFIG_MTD_SST25L=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_GPMI_NAND=y
+CONFIG_MTD_UBI=y
+CONFIG_EEPROM_AT24=y
+CONFIG_EEPROM_AT25=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_SCH=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_NETDEVICES=y
+CONFIG_RTL8187=m
+CONFIG_RT2X00=m
+CONFIG_RT73USB=m
+CONFIG_ZD1211RW=m
+CONFIG_INPUT_JOYDEV=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_UINPUT=m
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_MXS_AUART=y
+CONFIG_TTY_PRINTK=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MXS=y
+CONFIG_SPI=y
+CONFIG_SPI_BITBANG=m
+CONFIG_SPI_MXS=y
+CONFIG_SPI_SPIDEV=m
+CONFIG_GPIO_SYSFS=y
+CONFIG_HWMON=m
+CONFIG_WATCHDOG=y
+CONFIG_STMP3XXX_RTC_WATCHDOG=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_MEDIA_SUPPORT=m
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_FB=y
+CONFIG_FB_MXS=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_PWM=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_MON=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_ACM=y
+CONFIG_USB_PRINTER=y
+CONFIG_USB_WDM=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_UDC=y
+CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_USB_MXS_PHY=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_ETH=m
+CONFIG_MMC=y
+CONFIG_MMC_MXS=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_STMP=y
+CONFIG_DMADEVICES=y
+CONFIG_MXS_DMA=y
+CONFIG_STAGING=y
+CONFIG_MXS_LRADC=y
+CONFIG_IIO=y
+CONFIG_PWM=y
+CONFIG_PWM_MXS=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT2_FS_XIP=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_UBIFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_DEBUG_FS=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set

board/armadeus/apf28/linux-4.4.config

@@ -1,185 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_BSD_DISKLABEL=y
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_MXS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CPU_IDLE=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-CONFIG_IPV6=y
-CONFIG_CAN=m
-CONFIG_CAN_VCAN=m
-CONFIG_CAN_FLEXCAN=m
-CONFIG_BT=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_BT_HCIBTUSB=m
-CONFIG_CFG80211=m
-CONFIG_MAC80211=m
-CONFIG_MAC80211_RC_PID=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_FW_LOADER=m
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_M25P80=y
-# CONFIG_M25PXX_USE_FAST_READ is not set
-CONFIG_MTD_SST25L=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_GPMI_NAND=y
-CONFIG_MTD_UBI=y
-CONFIG_EEPROM_AT24=y
-CONFIG_EEPROM_AT25=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_CHR_DEV_SCH=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_NETDEVICES=y
-CONFIG_RTL8187=m
-CONFIG_RT2X00=m
-CONFIG_RT73USB=m
-CONFIG_ZD1211RW=m
-CONFIG_INPUT_JOYDEV=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_MXS_AUART=y
-CONFIG_TTY_PRINTK=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MXS=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=m
-CONFIG_SPI_MXS=y
-CONFIG_SPI_SPIDEV=m
-CONFIG_GPIO_SYSFS=y
-CONFIG_HWMON=m
-CONFIG_WATCHDOG=y
-CONFIG_STMP3XXX_RTC_WATCHDOG=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_MEDIA_SUPPORT=m
-CONFIG_MEDIA_CAMERA_SUPPORT=y
-CONFIG_FB=y
-CONFIG_FB_MXS=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_GENERIC is not set
-CONFIG_BACKLIGHT_PWM=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_ACM=y
-CONFIG_USB_PRINTER=y
-CONFIG_USB_WDM=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_CHIPIDEA=y
-CONFIG_USB_CHIPIDEA_UDC=y
-CONFIG_USB_CHIPIDEA_HOST=y
-CONFIG_USB_MXS_PHY=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_ETH=m
-CONFIG_MMC=y
-CONFIG_MMC_MXS=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_ONESHOT=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_STMP=y
-CONFIG_DMADEVICES=y
-CONFIG_MXS_DMA=y
-CONFIG_STAGING=y
-CONFIG_MXS_LRADC=y
-CONFIG_IIO=y
-CONFIG_PWM=y
-CONFIG_PWM_MXS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT2_FS_XIP=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_UBIFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_FS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y

board/armadeus/apf51/linux-3.12.config

@@ -0,0 +1,266 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_EMBEDDED=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_BSD_DISKLABEL=y
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_MXC=y
+CONFIG_MXC_IRQ_PRIOR=y
+CONFIG_MACH_IMX51_DT=y
+CONFIG_ARM_THUMBEE=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_CPU_FREQ_IMX=y
+CONFIG_CPU_IDLE=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_SUSPEND is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+CONFIG_IPV6=y
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+CONFIG_CAN_VCAN=m
+CONFIG_CAN_MCP251X=m
+CONFIG_BT=m
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_HIDP=m
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_CFG80211=m
+CONFIG_MAC80211=m
+CONFIG_MAC80211_RC_PID=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_FW_LOADER=m
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_MXC=y
+CONFIG_MTD_UBI=y
+CONFIG_MISC_DEVICES=y
+CONFIG_EEPROM_AT24=y
+CONFIG_EEPROM_AT25=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_SCH=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_SMSC_PHY=y
+CONFIG_NET_ETHERNET=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_RTL8187=m
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_RT2X00=m
+CONFIG_RT73USB=m
+CONFIG_ZD1211RW=m
+CONFIG_INPUT_JOYDEV=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_KEYBOARD_IMX=m
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_WM831X=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_UINPUT=m
+CONFIG_INPUT_WM831X_ON=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_IMX=y
+CONFIG_SPI=y
+CONFIG_SPI_IMX=y
+CONFIG_SPI_SPIDEV=m
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_WM831X=m
+CONFIG_POWER_SUPPLY=m
+CONFIG_WM831X_BACKUP=m
+CONFIG_WM831X_POWER=m
+CONFIG_HWMON=m
+CONFIG_SENSORS_AS1531=m
+CONFIG_SENSORS_WM831X=m
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_WM831X_WATCHDOG=m
+CONFIG_IMX2_WDT=y
+CONFIG_MFD_WM831X_I2C=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_MFD_IMX_IPU_V3=y
+CONFIG_MEDIA_SUPPORT=m
+CONFIG_VIDEO_DEV=m
+# CONFIG_RC_CORE is not set
+# CONFIG_MEDIA_TUNER_SIMPLE is not set
+# CONFIG_MEDIA_TUNER_TDA8290 is not set
+# CONFIG_MEDIA_TUNER_TDA827X is not set
+# CONFIG_MEDIA_TUNER_TDA18271 is not set
+# CONFIG_MEDIA_TUNER_TDA9887 is not set
+# CONFIG_MEDIA_TUNER_TEA5761 is not set
+# CONFIG_MEDIA_TUNER_TEA5767 is not set
+# CONFIG_MEDIA_TUNER_MT20XX is not set
+# CONFIG_MEDIA_TUNER_MT2060 is not set
+# CONFIG_MEDIA_TUNER_MT2266 is not set
+# CONFIG_MEDIA_TUNER_MT2131 is not set
+# CONFIG_MEDIA_TUNER_QT1010 is not set
+# CONFIG_MEDIA_TUNER_XC2028 is not set
+# CONFIG_MEDIA_TUNER_XC5000 is not set
+# CONFIG_MEDIA_TUNER_MXL5005S is not set
+# CONFIG_MEDIA_TUNER_MXL5007T is not set
+# CONFIG_MEDIA_TUNER_MC44S803 is not set
+# CONFIG_MEDIA_TUNER_MAX2165 is not set
+# CONFIG_MEDIA_TUNER_TDA18218 is not set
+CONFIG_VIDEO_VIVI=m
+CONFIG_USB_VIDEO_CLASS=m
+# CONFIG_RADIO_ADAPTERS is not set
+CONFIG_FB=y
+CONFIG_FB_MX5=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_SOUND=m
+# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set
+CONFIG_SND=m
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=m
+CONFIG_SND_IMX_SOC=m
+CONFIG_SND_SOC_APF51_DEV_WM8960=m
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+CONFIG_USB_MON=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_MXC=y
+CONFIG_USB_ACM=y
+CONFIG_USB_PRINTER=y
+CONFIG_USB_WDM=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_USB_PHY=y
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_USB_GPIO_VBUS=y
+CONFIG_USB_ULPI=y
+CONFIG_USB_GADGET=m
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_DEBUG_FS=y
+CONFIG_USB_ETH=m
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_USB_G_SERIAL=m
+CONFIG_USB_CDC_COMPOSITE=m
+CONFIG_USB_G_MULTI=m
+CONFIG_USB_G_MULTI_CDC=y
+CONFIG_USB_G_HID=m
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_ESDHC_IMX=y
+CONFIG_MMC_SPI=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_WM831X_STATUS=m
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_MXC=y
+CONFIG_RTC_DRV_WM831X=y
+CONFIG_STAGING=y
+CONFIG_IIO=m
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT2_FS_XIP=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_CMODE_NONE=y
+CONFIG_UBIFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_DEBUG_FS=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set

board/armadeus/apf51/linux-4.4.config

@@ -1,278 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_BSD_DISKLABEL=y
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_MXC=y
-CONFIG_MXC_IRQ_PRIOR=y
-CONFIG_SOC_IMX51=y
-CONFIG_ARM_THUMBEE=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_CPU_FREQ_IMX=y
-CONFIG_CPU_IDLE=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_SUSPEND is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-CONFIG_IPV6=y
-CONFIG_CAN=m
-CONFIG_CAN_RAW=m
-CONFIG_CAN_BCM=m
-CONFIG_CAN_VCAN=m
-CONFIG_CAN_MCP251X=m
-CONFIG_BT=m
-CONFIG_BT_L2CAP=y
-CONFIG_BT_SCO=y
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_HIDP=m
-CONFIG_BT_HCIBTUSB=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_CFG80211=m
-CONFIG_MAC80211=m
-CONFIG_MAC80211_RC_PID=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_FW_LOADER=m
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_MXC=y
-CONFIG_MTD_UBI=y
-CONFIG_MISC_DEVICES=y
-CONFIG_EEPROM_AT24=y
-CONFIG_EEPROM_AT25=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_CHR_DEV_SCH=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_NETDEVICES=y
-CONFIG_MII=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_RTL8187=m
-CONFIG_LIBERTAS=m
-CONFIG_LIBERTAS_SDIO=m
-CONFIG_RT2X00=m
-CONFIG_RT73USB=m
-CONFIG_ZD1211RW=m
-CONFIG_INPUT_JOYDEV=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_GPIO=m
-CONFIG_KEYBOARD_IMX=m
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_WM831X=y
-CONFIG_TOUCHSCREEN_MC13XXX=m
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_MC13783_PWRBUTTON=m
-CONFIG_INPUT_UINPUT=m
-CONFIG_INPUT_WM831X_ON=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_IMX=y
-CONFIG_SPI=y
-CONFIG_SPI_IMX=y
-CONFIG_SPI_SPIDEV=m
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_WM831X=m
-CONFIG_POWER_SUPPLY=y
-CONFIG_WM831X_BACKUP=m
-CONFIG_WM831X_POWER=m
-CONFIG_HWMON=m
-CONFIG_SENSORS_AS1531=m
-CONFIG_SENSORS_MC13783_ADC=m
-CONFIG_SENSORS_WM831X=m
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_WM831X_WATCHDOG=m
-CONFIG_IMX2_WDT=y
-CONFIG_MFD_MC13XXX_I2C=y
-CONFIG_MFD_WM831X_I2C=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_MC13892=m
-CONFIG_IMX_IPUV3_CORE=y
-CONFIG_DRM=y
-CONFIG_MFD_IMX_IPU_V3=y
-CONFIG_MEDIA_SUPPORT=m
-CONFIG_VIDEO_DEV=m
-# CONFIG_RC_CORE is not set
-# CONFIG_MEDIA_TUNER_SIMPLE is not set
-# CONFIG_MEDIA_TUNER_TDA8290 is not set
-# CONFIG_MEDIA_TUNER_TDA827X is not set
-# CONFIG_MEDIA_TUNER_TDA18271 is not set
-# CONFIG_MEDIA_TUNER_TDA9887 is not set
-# CONFIG_MEDIA_TUNER_TEA5761 is not set
-# CONFIG_MEDIA_TUNER_TEA5767 is not set
-# CONFIG_MEDIA_TUNER_MT20XX is not set
-# CONFIG_MEDIA_TUNER_MT2060 is not set
-# CONFIG_MEDIA_TUNER_MT2266 is not set
-# CONFIG_MEDIA_TUNER_MT2131 is not set
-# CONFIG_MEDIA_TUNER_QT1010 is not set
-# CONFIG_MEDIA_TUNER_XC2028 is not set
-# CONFIG_MEDIA_TUNER_XC5000 is not set
-# CONFIG_MEDIA_TUNER_MXL5005S is not set
-# CONFIG_MEDIA_TUNER_MXL5007T is not set
-# CONFIG_MEDIA_TUNER_MC44S803 is not set
-# CONFIG_MEDIA_TUNER_MAX2165 is not set
-# CONFIG_MEDIA_TUNER_TDA18218 is not set
-CONFIG_VIDEO_VIVI=m
-CONFIG_USB_VIDEO_CLASS=m
-# CONFIG_RADIO_ADAPTERS is not set
-CONFIG_FB=y
-CONFIG_FB_MX5=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_SOUND=m
-# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set
-CONFIG_SND=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_USB is not set
-CONFIG_SND_SOC=m
-CONFIG_SND_IMX_SOC=m
-CONFIG_SND_SOC_APF51_DEV_WM8960=m
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
-# CONFIG_USB_OTG_WHITELIST is not set
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_MXC=y
-CONFIG_USB_ACM=y
-CONFIG_USB_PRINTER=y
-CONFIG_USB_WDM=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_CHIPIDEA=y
-CONFIG_USB_CHIPIDEA_UDC=y
-CONFIG_USB_CHIPIDEA_HOST=y
-CONFIG_USB_PHY=y
-CONFIG_NOP_USB_XCEIV=y
-CONFIG_USB_GPIO_VBUS=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_GADGET_DEBUG_FS=y
-CONFIG_USB_ETH=m
-CONFIG_USB_MASS_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_CDC_COMPOSITE=m
-CONFIG_USB_G_MULTI=m
-CONFIG_USB_G_MULTI_CDC=y
-CONFIG_USB_G_HID=m
-CONFIG_MMC=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MMC_SDHCI_ESDHC_IMX=y
-CONFIG_MMC_SPI=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_WM831X_STATUS=m
-CONFIG_LEDS_MC13783=m
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_MXC=y
-CONFIG_RTC_DRV_WM831X=y
-CONFIG_RTC_DRV_MC13XXX=m
-CONFIG_STAGING=y
-CONFIG_DRM_IMX=y
-CONFIG_DRM_IMX_FB_HELPER=y
-CONFIG_DRM_IMX_PARALLEL_DISPLAY=y
-CONFIG_DRM_IMX_TVE=y
-CONFIG_DRM_IMX_IPUV3=y
-CONFIG_IIO=m
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT2_FS_XIP=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_EXT4_FS=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_UBIFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_FS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set

board/armadeus/readme.txt

@@ -13,6 +13,7 @@ Supported platforms
 Buildroot currently supports the following Armadeus platforms with the
 associated defconfigs:
 
+ * APF9328 SOM + devt boards -> armadeus_apf9328_defconfig
  * APF27 SOM + devt board    -> armadeus_apf27_defconfig
  * APF51 SOM + devt board    -> armadeus_apf51_defconfig
  * APF28 SOM + devt board    -> armadeus_apf28_defconfig
@@ -45,12 +46,15 @@ When the build is finished, you will end up with:
 
     output/images/
     ├── imx**-apfxxdev.dtb	[1]
+    ├── rootfs.jffs2		[2]
     ├── rootfs.tar
-    ├── rootfs.ubi
-    ├── rootfs.ubifs
+    ├── rootfs.ubi		[2]
+    ├── rootfs.ubifs		[2]
     └── uImage
 
 [1] Only if the kernel version used uses a Device Tree.
+[2] .ubi/.ubifs images are not available on APF9328 and replaced by a
+    .jffs2 one in this case.
 
 Building U-Boot is currently not supported in these configurations.
 
@@ -65,6 +69,7 @@ it:
   $ cp output/images/uImage /tftpboot/apfxx-linux.bin
   $ cp output/images/*.dtb /tftpboot/
   $ cp output/images/rootfs.ubi /tftpboot/apfxx-rootfs.ubi
+  $ cp output/images/rootfs.jffs2 /tftpboot/apfxx-rootfs.jffs2
 
 where "apfxx" is the version of your SOM, as used with _defconfigs.
 

board/atmel/at91sam9260ek/linux-3.9.config

@@ -0,0 +1,98 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_KERNEL_LZO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_AT91=y
+CONFIG_ARCH_AT91SAM9260=y
+CONFIG_ARCH_AT91SAM9260_SAM9XE=y
+CONFIG_MACH_AT91SAM9260EK=y
+CONFIG_MACH_CAM60=y
+CONFIG_MACH_SAM9_L9260=y
+CONFIG_MACH_AFEB9260=y
+CONFIG_MACH_USB_A9260=y
+CONFIG_MACH_QIL_A9260=y
+CONFIG_MACH_CPU9260=y
+CONFIG_MACH_FLEXIBITY=y
+CONFIG_MACH_SNAPPER_9260=y
+CONFIG_MACH_AT91SAM_DT=y
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+# CONFIG_ARM_THUMB is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
+CONFIG_FPE_NWFPE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_GPIO=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_AT91SAM9X_WATCHDOG=y
+# CONFIG_USB_HID is not set
+CONFIG_USB=y
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_MON=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_DEBUG=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_USB_G_SERIAL=m
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_AT91SAM9=y
+CONFIG_EXT2_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_UBIFS_FS=y
+CONFIG_CRAMFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_LL=y

board/atmel/at91sam9x5ek_mmc/genimage.cfg

@@ -1,39 +0,0 @@
-# Image for SD card boot on Atmel at91sam9x5ek boards
-#
-image boot.vfat {
-	vfat {
-		files = {
-			"zImage",
-			"at91sam9g15ek.dtb",
-			"at91sam9g25ek.dtb",
-			"at91sam9g35ek.dtb",
-			"at91sam9x25ek.dtb",
-			"at91sam9x35ek.dtb",
-			"boot.bin",
-			"u-boot.bin"
-		}
-
-		file uboot.env {
-			image = "uboot-env.bin"
-		}
-	}
-	size = 16M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition boot {
-		partition-type = 0xC
-		bootable = "true"
-		image = "boot.vfat"
-		offset = 1M
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-		size = 512M
-	}
-}

board/atmel/at91sam9x5ek_mmc/post-image.sh

@@ -1,20 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname $0)"
-GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
-GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
-
-rm -rf "${GENIMAGE_TMP}"
-
-echo --rootpath "${TARGET_DIR}"
-echo --tmppath "${GENIMAGE_TMP}"
-echo --inputpath "${BINARIES_DIR}"
-echo --outputpath "${BINARIES_DIR}"
-echo --config "${GENIMAGE_CFG}"
-
-genimage                               \
-	--rootpath "${TARGET_DIR}"     \
-	--tmppath "${GENIMAGE_TMP}"    \
-	--inputpath "${BINARIES_DIR}"  \
-	--outputpath "${BINARIES_DIR}" \
-	--config "${GENIMAGE_CFG}"

board/atmel/at91sam9x5ek_mmc/uboot-env.txt

@@ -1,7 +0,0 @@
-bootargs=console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait video=Unknown-1:800x480-16
-bootcmd=fatload mmc 0:1 0x21000000 at91sam9g35ek.dtb; fatload mmc 0:1 0x22000000 zImage; bootz 0x22000000 - 0x21000000
-bootdelay=1
-ethact=gmac0
-stderr=serial
-stdin=serial
-stdout=serial

board/atmel/readme.txt

@@ -13,6 +13,7 @@ This guide covers the following configurations:
  - atmel_sama5d3_xplained_dev_defconfig
  - atmel_sama5d3_xplained_mmc_defconfig
  - atmel_sama5d3_xplained_mmc_dev_defconfig
+ - atmel_sama5d4ek_defconfig
  - atmel_sama5d4_xplained_defconfig
  - atmel_sama5d4_xplained_dev_defconfig
  - atmel_sama5d4_xplained_mmc_defconfig
@@ -44,7 +45,7 @@ using SAM-BA" section below.
 For the Xplained boards, an alternative Buildroot configuration is
 provided to boot from an SD card. Those configurations are labeled as
 'mmc'. In this case, after building Buildroot, follow the instructions
-in the "Preparing the SD card" section.
+in the "Preparting the SD card" sction.
 
 To configure and build Buildroot, run:
 

board/atmel/sama5d2_xplained_mmc/genimage.cfg

@@ -23,7 +23,6 @@ image sdcard.img {
 		partition-type = 0xC
 		bootable = "true"
 		image = "boot.vfat"
-		offset = 1M
 	}
 
 	partition rootfs {

board/atmel/sama5d3_xplained_mmc/genimage.cfg

@@ -23,7 +23,6 @@ image sdcard.img {
 		partition-type = 0xC
 		bootable = "true"
 		image = "boot.vfat"
-		offset = 1M
 	}
 
 	partition rootfs {

board/atmel/sama5d4_xplained_mmc/genimage.cfg

@@ -24,7 +24,6 @@ image sdcard.img {
 		partition-type = 0xC
 		bootable = "true"
 		image = "boot.vfat"
-		offset = 1M
 	}
 
 	partition rootfs {

board/beagleboardx15/genimage.cfg

@@ -1,26 +0,0 @@
-image boot.vfat {
-	vfat {
-		files = {
-			"MLO",
-			"u-boot.img"
-		}
-	}
-	size = 4M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition u-boot {
-		partition-type = 0xC
-		bootable = "true"
-                image = "boot.vfat"
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-		size = 512M
-	}
-}

board/beagleboardx15/post-image.sh

@@ -1,15 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname $0)"
-
-GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
-GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
-
-rm -rf "${GENIMAGE_TMP}"
-
-genimage \
-    --rootpath "${TARGET_DIR}" \
-    --tmppath "${GENIMAGE_TMP}" \
-    --inputpath "${BINARIES_DIR}" \
-    --outputpath "${BINARIES_DIR}" \
-    --config "${GENIMAGE_CFG}"

board/beagleboardx15/readme.txt

@@ -1,49 +0,0 @@
-BeagleBoard X15
-
-Intro
-=====
-This config currently supports the beagleboard x15,
-and generates a barebone image.
-
-The image must be flashed to a SD card to be used.
-
-How to build it
-===============
-
-  $ make beagleboardx15_defconfig
-
-Then you can edit the build options using
-
-  $ make menuconfig
-
-Compile all and build a sdcard image:
-
-  $ make
-
-Result of the build
--------------------
-
-After building, you should get a tree like this:
-
-  output/images/
-  ├── am57xx-beagle-x15.dtb
-  ├── am57xx-beagle-x15-revb1.dtb
-  ├── boot.vfat
-  ├── MLO
-  ├── rootfs.ext2
-  ├── rootfs.ext4
-  ├── rootfs.tar
-  ├── sdcard.img
-  ├── u-boot.img
-  ├── u-boot-spl.bin
-  └── zImage
-
-How to write the microSD card
-=============================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
-  $ sudo dd if=output/images/sdcard.img of=/dev/sdX

board/beaglebone/genimage.cfg

@@ -5,11 +5,8 @@ image boot.vfat {
 			"u-boot.img",
 			"zImage",
 			"uEnv.txt",
-			"am335x-evm.dtb",
-			"am335x-evmsk.dtb",
 			"am335x-bone.dtb",
-			"am335x-boneblack.dtb",
-			"am335x-bonegreen.dtb",
+			"am335x-boneblack.dtb"
 		}
 	}
 	size = 16M

board/beaglebone/genimage_linux41.cfg

@@ -1,32 +0,0 @@
-image boot.vfat {
-	vfat {
-		files = {
-			"MLO",
-			"u-boot.img",
-			"zImage",
-			"uEnv.txt",
-			"am335x-evm.dtb",
-			"am335x-evmsk.dtb",
-			"am335x-bone.dtb",
-			"am335x-boneblack.dtb",
-		}
-	}
-	size = 16M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition u-boot {
-		partition-type = 0xC
-		bootable = "true"
-                image = "boot.vfat"
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-		size = 512M
-	}
-}

board/beaglebone/linux-3.12.config

@@ -0,0 +1,251 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EXPERT=y
+CONFIG_SLAB=y
+CONFIG_PROFILING=y
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_ARCH_OMAP2PLUS=y
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_MUX_DEBUG=y
+CONFIG_ARCH_OMAP3=y
+CONFIG_ARCH_OMAP4=y
+CONFIG_SOC_AM43XX=y
+# CONFIG_ARCH_OMAP2PLUS_TYPICAL is not set
+# CONFIG_SOC_TI81XX is not set
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_DEVKIT8000 is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OMAP3530_LV_SOM is not set
+# CONFIG_MACH_OMAP3_TORPEDO is not set
+# CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3EVM is not set
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_TOUCHBOOK is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RM680 is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+# CONFIG_MACH_OMAP_ZOOM2 is not set
+# CONFIG_MACH_OMAP_ZOOM3 is not set
+# CONFIG_MACH_CM_T35 is not set
+# CONFIG_MACH_CM_T3517 is not set
+# CONFIG_MACH_IGEP0020 is not set
+# CONFIG_MACH_IGEP0030 is not set
+# CONFIG_MACH_SBC3530 is not set
+# CONFIG_MACH_OMAP_3630SDP is not set
+CONFIG_ARM_THUMBEE=y
+CONFIG_HAVE_ARM_ARCH_TIMER=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_HIGHMEM=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200"
+CONFIG_KEXEC=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_GENERIC_CPUFREQ_CPU0=y
+# CONFIG_ARM_OMAP2PLUS_CPUFREQ is not set
+CONFIG_FPE_NWFPE=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_BINFMT_MISC=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM_DEBUG=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_OMAP_OCP2SCP=y
+CONFIG_CONNECTOR=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_CROSSBAR=y
+CONFIG_EEPROM_93CX6=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_MD=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+CONFIG_TI_CPSW=y
+CONFIG_TI_CPTS=y
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_AT803X_PHY=y
+CONFIG_SMSC_PHY=y
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+CONFIG_SERIAL_OMAP=y
+CONFIG_SERIAL_OMAP_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_OMAP=y
+CONFIG_SPI=y
+CONFIG_SPI_OMAP24XX=y
+CONFIG_SPI_TI_QSPI=y
+CONFIG_PINCTRL_SINGLE=y
+CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_W1=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_THERMAL=y
+CONFIG_THERMAL_GOV_FAIR_SHARE=y
+CONFIG_THERMAL_GOV_USER_SPACE=y
+CONFIG_CPU_THERMAL=y
+CONFIG_TI_SOC_THERMAL=y
+CONFIG_TI_THERMAL=y
+CONFIG_WATCHDOG=y
+CONFIG_OMAP_WATCHDOG=y
+CONFIG_MFD_SYSCON=y
+CONFIG_MFD_TPS65217=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_PBIAS=y
+CONFIG_REGULATOR_TPS65023=y
+CONFIG_REGULATOR_TPS6507X=y
+CONFIG_REGULATOR_TPS65217=y
+CONFIG_REGULATOR_TIAVSCLASS0=y
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_DA8XX=y
+CONFIG_FB_DA8XX_TDA998X=y
+CONFIG_OMAP2_DSS=y
+CONFIG_OMAP2_DSS_SDI=y
+CONFIG_OMAP2_DSS_DSI=y
+CONFIG_FB_OMAP2=y
+CONFIG_DISPLAY_CONNECTOR_HDMI=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_MON=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_MUSB_HDRC=m
+CONFIG_USB_MUSB_OMAP2PLUS=m
+CONFIG_USB_MUSB_DSPS=m
+CONFIG_USB_TI_CPPI41_DMA=y
+CONFIG_USB_STORAGE=y
+CONFIG_AM335X_PHY_USB=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DEBUG=y
+CONFIG_USB_GADGET_DEBUG_FS=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_EEM=y
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_USB_G_MULTI=m
+CONFIG_USB_G_MULTI_CDC=y
+CONFIG_MMC=y
+CONFIG_MMC_UNSAFE_RESUME=y
+CONFIG_SDIO_UART=y
+CONFIG_MMC_OMAP=y
+CONFIG_MMC_OMAP_HS=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_OMAP=y
+CONFIG_DMADEVICES=y
+CONFIG_TI_EDMA=y
+CONFIG_DMA_OMAP=y
+CONFIG_TI_CPPI41=y
+CONFIG_COMMON_CLK_DEBUG=y
+CONFIG_OMAP_USB2=y
+CONFIG_OMAP_PIPE3=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=y
+CONFIG_QUOTA=y
+CONFIG_QFMT_V2=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+CONFIG_PROVE_LOCKING=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_CCITT=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC7=y
+CONFIG_LIBCRC32C=y
+CONFIG_AVERAGE=y

board/beaglebone/linux-4.1-sgx.fragment

@@ -1,12 +0,0 @@
-CONFIG_PREEMPT=y
-CONFIG_PREEMPT_COUNT=y
-CONFIG_OMAP2_DSS_INIT=y
-CONFIG_OMAP_DSS_BASE=y
-CONFIG_OMAP2_DSS=y
-CONFIG_OMAP2_DSS_DPI=y
-CONFIG_DRM_OMAP=y
-CONFIG_DRM_OMAP_NUM_CRTCS=2
-CONFIG_DRM_OMAP_WB_M2M=y
-CONFIG_DRM_TILCDC=y
-CONFIG_DRM_I2C_NXP_TDA998X=y
-CONFIG_DRM=y

board/beaglebone/patches/linux/0001-keep-jtag-clock-alive-for-debugger.patch

@@ -1,16 +0,0 @@
-This patch keeps the debugSS clock alive, it clocks the JTAG macro and enables
-access to the SoC via JTAG after the kernel booted.
-
-Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
----
-diff -Naur linux-orig/arch/arm/mach-omap2/omap_hwmod_33xx_data.c linux-52c4aa7cdb93d61f8008f380135beaf7b8fa6593/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
---- linux-orig/arch/arm/mach-omap2/omap_hwmod_33xx_data.c	2015-10-02 17:30:56.000000000 +0200
-+++ linux-52c4aa7cdb93d61f8008f380135beaf7b8fa6593/arch/arm/mach-omap2/omap_hwmod_33xx_data.c	2016-08-15 11:28:55.017617612 +0200
-@@ -208,6 +208,7 @@
- 	.name		= "debugss",
- 	.class		= &am33xx_debugss_hwmod_class,
- 	.clkdm_name	= "l3_aon_clkdm",
-+	.flags		= (HWMOD_INIT_NO_IDLE|HWMOD_INIT_NO_RESET), /* keep debugSS clock alive for JTAG */
- 	.main_clk	= "trace_clk_div_ck",
- 	.prcm		= {
- 		.omap4	= {

board/beaglebone/patches/linux/linux-0001-arm-Export-cache-flush-management-symbols-when-MULTI.patch

@@ -0,0 +1,34 @@
+From 29885f2f3d700341d322274db6ad085e601c0994 Mon Sep 17 00:00:00 2001
+From: Pantelis Antoniou <panto@antoniou-consulting.com>
+Date: Fri, 4 Jan 2013 00:32:33 +0200
+Subject: [PATCH 3/3] arm: Export cache flush management symbols when
+ !MULTI_CACHE
+
+When compiling a kernel without CONFIG_MULTI_CACHE enabled the
+dma access functions end up not being exported. Fix it.
+
+Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
+---
+ arch/arm/kernel/setup.c |    9 +++++++++
+ 1 file changed, 9 insertions(+)
+
+diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
+index da1d1aa..dcb678c 100644
+--- a/arch/arm/kernel/setup.c
++++ b/arch/arm/kernel/setup.c
+@@ -923,3 +923,12 @@ const struct seq_operations cpuinfo_op = {
+ 	.stop	= c_stop,
+ 	.show	= c_show
+ };
++
++/* export the cache management functions */
++#ifndef MULTI_CACHE
++
++EXPORT_SYMBOL(__glue(_CACHE,_dma_map_area));
++EXPORT_SYMBOL(__glue(_CACHE,_dma_unmap_area));
++EXPORT_SYMBOL(__glue(_CACHE,_dma_flush_range));
++
++#endif
+-- 
+1.7.10.4
+

board/beaglebone/post-image.sh

@@ -1,22 +1,13 @@
 #!/bin/sh
-# post-image.sh for CircuitCo BeagleBone and TI am335x-evm
+# post-image.sh for BeagleBone
 # 2014, Marcin Jabrzyk <marcin.jabrzyk@gmail.com>
-# 2016, Lothar Felten <lothar.felten@gmail.com>
 
 BOARD_DIR="$(dirname $0)"
 
 # copy the uEnv.txt to the output/images directory
 cp board/beaglebone/uEnv.txt $BINARIES_DIR/uEnv.txt
 
-# the 4.1 kernel does not provide a dtb for beaglebone green, so we
-# use a different genimage config if am335x-bonegreen.dtb is not
-# built:
-if [ -e ${BINARIES_DIR}/am335x-bonegreen.dtb ] ; then
-	GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
-else
-	GENIMAGE_CFG="${BOARD_DIR}/genimage_linux41.cfg"
-fi
-
+GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
 GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
 
 rm -rf "${GENIMAGE_TMP}"

board/beaglebone/readme.txt

@@ -1,52 +1,44 @@
-CircuitCo BeagleBone
-Texas Instuments AM335x Evaluation Module (TMDXEVM3358)
+BeagleBone
 
-Description
-===========
-
-This configuration will build a complete image for the beaglebone and
-the TI AM335x-EVM, the board type is identified by the on-board
-EEPROM. The configuration is based on the
-ti-processor-sdk-02.00.00.00. Device tree blobs for beaglebone
-variants and the evm-sk are built too.
-
-For Qt5 support support use the beaglebone_qt5_defconfig.
+Intro
+=====
+To be able to use BeagleBone board with the images generated by
+Buildroot, you have to prepare the SDCard.
 
 How to build it
 ===============
 
-Select the default configuration for the target:
-$ make beaglebone_defconfig
+  $ make beaglebone_defconfig
 
-Optional: modify the configuration:
-$ make menuconfig
+Then you can edit the build options using
 
-Build:
-$ make
+  $ make menuconfig
+
+Compile all and build rootfs image:
+
+  $ make
 
 Result of the build
-===================
-output/images/
-├── am335x-boneblack.dtb
-├── am335x-bone.dtb
-├── am335x-evm.dtb
-├── am335x-evmsk.dtb
-├── boot.vfat
-├── MLO
-├── rootfs.ext2
-├── rootfs.tar
-├── sdcard.img
-├── u-boot.img
-├── uEnv.txt
-└── zImage
+-------------------
 
-To copy the image file to the sdcard use dd:
-$ dd if=output/images/sdcard.img of=/dev/XXX
+After building, you should get a tree like this:
 
-Tested hardware
-===============
-am335x-evm (rev. 1.1A)
-beagleboneblack (rev. A5A)
-beaglebone (rev. A6)
+  output/images/
+  ├── am335x-boneblack.dtb
+  ├── am335x-bone.dtb
+  ├── MLO
+  ├── rootfs.ext2
+  ├── sdcard.img
+  ├── u-boot.img
+  ├── uEnv.txt
+  └── zImage
 
-2016, Lothar Felten <lothar.felten@gmail.com>
+How to write the microSD card
+=============================
+
+Once the build process is finished you will have an image called "sdcard.img"
+in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an SD card with "dd":
+
+  $ sudo dd if=output/images/sdcard.img of=/dev/sdX

board/beaglebone/uEnv.txt

@@ -1,4 +1,3 @@
 bootpart=0:1
 bootdir=
-bootargs=console=ttyO0,115200n8 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait
-uenvcmd=run loadimage;run loadfdt;printenv bootargs;bootz ${loadaddr} - ${fdtaddr};
+uenvcmd=run loadimage;run loadramdisk;run findfdt;run loadfdt;run ramboot

board/boundarydevices/common/6x_bootscript.txt

@@ -92,12 +92,14 @@ fi
 
 setenv bootargs "${bootargs} console=${console},115200 vmalloc=400M consoleblank=0 rootwait fixrtc"
 
+bpart=1
+
 if test "sata" = "${dtype}" ; then
-	setenv bootargs "${bootargs} root=/dev/sda${bootpart}" ;
+	setenv bootargs "${bootargs} root=/dev/sda${bpart}" ;
 elif test "usb" = "${dtype}" ; then
-	setenv bootargs "${bootargs} root=/dev/sda${bootpart}" ;
+	setenv bootargs "${bootargs} root=/dev/sda${bpart}" ;
 else
-	setenv bootargs "${bootargs} root=/dev/mmcblk${disk}p${bootpart}"
+	setenv bootargs "${bootargs} root=/dev/mmcblk${disk}p${bpart}"
 fi
 
 if itest.s "x" != "x${disable_giga}" ; then
@@ -106,7 +108,6 @@ fi
 
 if itest.s "x" != "x${wlmac}" ; then
 	setenv bootargs ${bootargs} wlcore.mac=${wlmac}
-	setenv bootargs ${bootargs} wlan.mac=${wlmac}
 fi
 
 if itest.s "x" != "x${gpumem}" ; then

board/boundarydevices/common/genimage.cfg

@@ -1,15 +1,13 @@
-# Minimal SD card image for Boundary Devices platforms
-#
-# It does not need a boot section for a bootloader since it is booted
-# from its NOR flash memory.
-#
-# To update the bootloader, execute the following from U-Boot prompt:
-# => run upgradeu
-
 image sdcard.img {
 	hdimage {
 	}
 
+	partition u-boot {
+		in-partition-table = "no"
+		image = "u-boot.imx"
+		offset = 1024
+	}
+
 	partition rootfs {
 		partition-type = 0x83
 		image = "rootfs.ext4"

board/boundarydevices/common/post-build.sh

@@ -8,13 +8,13 @@
 BOARD_DIR="$(dirname $0)"
 
 # bd u-boot looks for bootscript here
-$HOST_DIR/bin/mkimage -A arm -O linux -T script -C none -a 0 -e 0 \
+$HOST_DIR/usr/bin/mkimage -A arm -O linux -T script -C none -a 0 -e 0 \
 -n "boot script" -d $BOARD_DIR/6x_bootscript.txt $TARGET_DIR/6x_bootscript
 
 # u-boot / update script for bd upgradeu command
 if [ -e $BINARIES_DIR/u-boot.imx ];
 then
     install -D -m 0644 $BINARIES_DIR/u-boot.imx $TARGET_DIR/u-boot.imx
-    $HOST_DIR/bin/mkimage -A arm -O linux -T script -C none -a 0 -e 0 \
+    $HOST_DIR/usr/bin/mkimage -A arm -O linux -T script -C none -a 0 -e 0 \
     -n "upgrade script" -d $BOARD_DIR/6x_upgrade.txt $TARGET_DIR/6x_upgrade
 fi

board/calao/qil-a9260/linux-3.4.7.config

@@ -0,0 +1,111 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_AT91=y
+CONFIG_ARCH_AT91SAM9260=y
+CONFIG_MACH_QIL_A9260=y
+CONFIG_AT91_SLOW_CLOCK=y
+CONFIG_AT91_EARLY_USART0=y
+# CONFIG_ARM_THUMB is not set
+CONFIG_AEABI=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS1,115200"
+CONFIG_FPE_NWFPE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_SPI=y
+CONFIG_SPI_ATMEL=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+# CONFIG_USB_HID is not set
+CONFIG_USB=y
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_MON=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=m
+CONFIG_MMC=y
+CONFIG_MMC_AT91=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_M41T94=y
+CONFIG_EXT2_FS=y
+CONFIG_FUSE_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_XATTR=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_LL=y

board/calao/qil-a9260/patches/at91bootstrap/0001-qil-a9260.patch

@@ -0,0 +1,603 @@
+From a3e08beea8bf5e96e1237eef4a82f4a2fdd5286b Mon Sep 17 00:00:00 2001
+From: Gregory Hermant <gregory.hermant@calao-systems.com>
+Date: Thu, 19 Jul 2012 14:19:59 +0200
+Subject: [PATCH] Add support for the Calao-systems QIL-A9260
+
+
+Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
+---
+ board/qil_a9260/nandflash/Makefile    |  122 ++++++++++++++
+ board/qil_a9260/nandflash/qil-a9260.h |  109 ++++++++++++
+ board/qil_a9260/qil_a9260.c           |  298 +++++++++++++++++++++++++++++++++
+ crt0_gnu.S                            |    7 +
+ include/part.h                        |    6 +-
+ 5 files changed, 541 insertions(+), 1 deletions(-)
+ create mode 100644 board/qil_a9260/nandflash/Makefile
+ create mode 100644 board/qil_a9260/nandflash/qil-a9260.h
+ create mode 100644 board/qil_a9260/qil_a9260.c
+
+diff --git a/board/qil_a9260/nandflash/Makefile b/board/qil_a9260/nandflash/Makefile
+new file mode 100644
+index 0000000..209a25f
+--- /dev/null
++++ b/board/qil_a9260/nandflash/Makefile
+@@ -0,0 +1,122 @@
++# TODO: set this appropriately for your local toolchain
++ifndef ERASE_FCT
++ERASE_FCT=rm -f
++endif
++ifndef CROSS_COMPILE
++CROSS_COMPILE=arm-elf-
++endif
++
++TOOLCHAIN=gcc
++
++BOOTSTRAP_PATH=../../..
++
++# NandFlashBoot Configuration for QIL-A9260
++
++# Target name (case sensitive!!!)
++TARGET=AT91SAM9260
++# Board name (case sensitive!!!)
++BOARD=qil_a9260
++# Link Address and Top_of_Memory
++LINK_ADDR=0x200000
++TOP_OF_MEMORY=0x301000
++# Name of current directory
++PROJECT=nandflash
++
++ifndef BOOT_NAME
++BOOT_NAME=$(PROJECT)_$(BOARD)
++endif
++
++INCL=./$(BOOTSTRAP_PATH)/board/$(BOARD)/$(PROJECT)
++
++ifeq ($(TOOLCHAIN), gcc)
++
++AS=$(CROSS_COMPILE)gcc
++CC=$(CROSS_COMPILE)gcc
++LD=$(CROSS_COMPILE)gcc
++NM= $(CROSS_COMPILE)nm
++SIZE=$(CROSS_COMPILE)size
++OBJCOPY=$(CROSS_COMPILE)objcopy
++OBJDUMP=$(CROSS_COMPILE)objdump
++CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL)
++ASFLAGS=-g -mcpu=arm926ej-s -c -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
++
++# Linker flags.
++#  -Wl,...:     tell GCC to pass this to linker.
++#    -Map:      create map file
++#    --cref:    add cross reference to map file
++LDFLAGS+=-nostartfiles -nostdlib -Wl,-Map=$(BOOT_NAME).map,--cref
++LDFLAGS+=-T $(BOOTSTRAP_PATH)/elf32-littlearm.lds -Ttext $(LINK_ADDR)
++OBJS=crt0_gnu.o
++
++endif
++
++OBJS+=\
++	$(BOARD).o \
++	main.o \
++	gpio.o \
++	pmc.o \
++	debug.o \
++	sdramc.o \
++	nandflash.o \
++	_udivsi3.o \
++	_umodsi3.o \
++	div0.o \
++	udiv.o \
++	string.o
++
++
++rebuild: clean all
++
++all: 	$(BOOT_NAME)
++
++ifeq ($(TOOLCHAIN), gcc)
++$(BOOT_NAME): $(OBJS)
++	$(LD) $(LDFLAGS) -n -o $(BOOT_NAME).elf $(OBJS)
++	$(OBJCOPY) --strip-debug --strip-unneeded $(BOOT_NAME).elf -O binary $(BOOT_NAME).bin
++endif
++
++
++$(BOARD).o: $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c -o $(BOARD).o
++
++main.o: $(BOOTSTRAP_PATH)/main.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/main.c -o main.o
++
++gpio.o: $(BOOTSTRAP_PATH)/driver/gpio.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/gpio.c -o gpio.o
++
++pmc.o:  $(BOOTSTRAP_PATH)/driver/pmc.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/pmc.c -o pmc.o
++
++debug.o: $(BOOTSTRAP_PATH)/driver/debug.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/debug.c -o debug.o
++
++sdramc.o:  $(BOOTSTRAP_PATH)/driver/sdramc.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/sdramc.c -o sdramc.o
++
++dataflash.o:  $(BOOTSTRAP_PATH)/driver/dataflash.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/dataflash.c -o dataflash.o
++
++nandflash.o:  $(BOOTSTRAP_PATH)/driver/nandflash.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/nandflash.c -o nandflash.o
++
++crt0_gnu.o:  $(BOOTSTRAP_PATH)/crt0_gnu.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/crt0_gnu.S -o crt0_gnu.o
++
++div0.o:  $(BOOTSTRAP_PATH)/lib/div0.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/div0.c -o div0.o
++
++string.o:  $(BOOTSTRAP_PATH)/lib/string.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/string.c -o string.o
++
++udiv.o:  $(BOOTSTRAP_PATH)/lib/udiv.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/udiv.c -o udiv.o
++
++_udivsi3.o:  $(BOOTSTRAP_PATH)/lib/_udivsi3.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_udivsi3.S -o _udivsi3.o
++
++_umodsi3.o:  $(BOOTSTRAP_PATH)/lib/_umodsi3.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_umodsi3.S -o _umodsi3.o
++
++clean:
++	$(ERASE_FCT) *.o *.bin *.elf *.map
+diff --git a/board/qil_a9260/nandflash/qil-a9260.h b/board/qil_a9260/nandflash/qil-a9260.h
+new file mode 100644
+index 0000000..c87002e
+--- /dev/null
++++ b/board/qil_a9260/nandflash/qil-a9260.h
+@@ -0,0 +1,109 @@
++/* ----------------------------------------------------------------------------
++ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
++ * ----------------------------------------------------------------------------
++ * Copyright (c) 2006, Atmel Corporation
++
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ *
++ * - Redistributions of source code must retain the above copyright notice,
++ * this list of conditions and the disclaimer below.
++ *
++ * Atmel's name may not be used to endorse or promote products derived from
++ * this software without specific prior written permission.
++ *
++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ----------------------------------------------------------------------------
++ * File Name           : qil-a9260.h
++ * Object              :
++ * Creation            : GH July 19th 2012
++ *-----------------------------------------------------------------------------
++ */
++#ifndef _QIL_A9260_H
++#define _QIL_A9260_H
++
++/* ******************************************************************* */
++/* PMC Settings                                                        */
++/*                                                                     */
++/* The main oscillator is enabled as soon as possible in the c_startup */
++/* and MCK is switched on the main oscillator.                         */
++/* PLL initialization is done later in the hw_init() function          */
++/* ******************************************************************* */
++#define MASTER_CLOCK		(180000000/2)
++#define PLL_LOCK_TIMEOUT	1000000
++
++#define PLLA_SETTINGS	0x20593F06
++#define PLLB_SETTINGS	0x10483F0E
++
++/* Switch MCK on PLLA output PCK = PLLA = 2 * MCK */
++#define MCKR_SETTINGS		(AT91C_PMC_PRES_CLK | AT91C_PMC_MDIV_2)
++#define MCKR_CSS_SETTINGS	(AT91C_PMC_CSS_PLLA_CLK | MCKR_SETTINGS)
++
++/* ******************************************************************* */
++/* NandFlash Settings                                                  */
++/*                                                                     */
++/* ******************************************************************* */
++#define AT91C_SMARTMEDIA_BASE	0x40000000
++
++#define AT91_SMART_MEDIA_ALE    (1 << 21)	/* our ALE is AD21 */
++#define AT91_SMART_MEDIA_CLE    (1 << 22)	/* our CLE is AD22 */
++
++#define NAND_DISABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_SODR = AT91C_PIO_PC14;} while(0)
++#define NAND_ENABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_CODR = AT91C_PIO_PC14;} while(0)
++
++#define NAND_WAIT_READY() while (!(*(volatile unsigned int *)AT91C_PIOC_PDSR & AT91C_PIO_PC13))
++
++
++/* ******************************************************************** */
++/* SMC Chip Select 3 Timings for NandFlash for MASTER_CLOCK = 90000000.*/
++/* Please refer to SMC section in AT91SAM datasheet to learn how 	*/
++/* to generate these values. 						*/
++/* ******************************************************************** */
++#define AT91C_SM_NWE_SETUP	(1 << 0)
++#define AT91C_SM_NCS_WR_SETUP	(0 << 8)
++#define AT91C_SM_NRD_SETUP	(1 << 16)
++#define AT91C_SM_NCS_RD_SETUP	(0 << 24)
++  
++#define AT91C_SM_NWE_PULSE 	(3 << 0)
++#define AT91C_SM_NCS_WR_PULSE	(3 << 8)
++#define AT91C_SM_NRD_PULSE	(3 << 16)
++#define AT91C_SM_NCS_RD_PULSE	(3 << 24)
++  
++#define AT91C_SM_NWE_CYCLE 	(5 << 0)
++#define AT91C_SM_NRD_CYCLE	(5 << 16)
++#define AT91C_SM_TDF	        (2 << 16)
++
++/* ******************************************************************* */
++/* BootStrap Settings                                                  */
++/*                                                                     */
++/* ******************************************************************* */
++#define IMG_ADDRESS 		0x20000		/* Image Address in NandFlash */
++#define	IMG_SIZE		0x40000		/* Image Size in NandFlash    */
++
++#define MACH_TYPE       	0x6AF		/* QIL-A9260 */
++#define JUMP_ADDR		0x23F00000	/* Final Jump Address 	      */
++
++/* ******************************************************************* */
++/* Application Settings                                                */
++/* ******************************************************************* */
++#undef CFG_DEBUG
++#undef CFG_DATAFLASH
++
++#define CFG_NANDFLASH
++#undef	NANDFLASH_SMALL_BLOCKS	/* NANDFLASH_LARGE_BLOCKS used instead */
++
++#define CFG_HW_INIT
++#define CFG_SDRAM
++
++#endif	/* _QIL_A9260_H */
+diff --git a/board/qil_a9260/qil_a9260.c b/board/qil_a9260/qil_a9260.c
+new file mode 100644
+index 0000000..ae122e7
+--- /dev/null
++++ b/board/qil_a9260/qil_a9260.c
+@@ -0,0 +1,298 @@
++/* ----------------------------------------------------------------------------
++ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
++ * ----------------------------------------------------------------------------
++ * Copyright (c) 2006, Atmel Corporation
++
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ *
++ * - Redistributions of source code must retain the above copyright notice,
++ * this list of conditions and the disclaiimer below.
++ *
++ * Atmel's name may not be used to endorse or promote products derived from
++ * this software without specific prior written permission.
++ *
++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ----------------------------------------------------------------------------
++ * File Name           : qil_a9260.c
++ * Object              :
++ * Creation            : GH July 19th 2012
++ *-----------------------------------------------------------------------------
++ */
++#include "../../include/part.h"
++#include "../../include/gpio.h"
++#include "../../include/pmc.h"
++#include "../../include/debug.h"
++#include "../../include/sdramc.h"
++#include "../../include/main.h"
++#ifdef CFG_NANDFLASH
++#include "../../include/nandflash.h"
++#endif
++#ifdef CFG_DATAFLASH
++#include "../../include/dataflash.h"
++#endif
++
++static inline unsigned int get_cp15(void)
++{
++	unsigned int value;
++	__asm__("mrc p15, 0, %0, c1, c0, 0" : "=r" (value));
++	return value;
++}
++
++static inline void set_cp15(unsigned int value)
++{
++	__asm__("mcr p15, 0, %0, c1, c0, 0" : : "r" (value));
++}
++
++#ifdef CFG_HW_INIT
++/*----------------------------------------------------------------------------*/
++/* \fn    hw_init							      */
++/* \brief This function performs very low level HW initialization	      */
++/* This function is invoked as soon as possible during the c_startup	      */
++/* The bss segment must be initialized					      */
++/*----------------------------------------------------------------------------*/
++void hw_init(void)
++{
++	unsigned int cp15;
++	
++	/* Configure PIOs */
++	const struct pio_desc hw_pio[] = {
++#ifdef CFG_DEBUG
++		{"RXD", AT91C_PIN_PB(14), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"TXD", AT91C_PIN_PB(15), 0, PIO_DEFAULT, PIO_PERIPH_A},
++#endif
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Disable watchdog */
++	writel(AT91C_WDTC_WDDIS, AT91C_BASE_WDTC + WDTC_WDMR);
++
++	/* At this stage the main oscillator is supposed to be enabled
++	 * PCK = MCK = MOSC */
++
++	/* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */
++	pmc_cfg_plla(PLLA_SETTINGS, PLL_LOCK_TIMEOUT);
++
++	/* PCK = PLLA = 2 * MCK */
++	pmc_cfg_mck(MCKR_SETTINGS, PLL_LOCK_TIMEOUT);
++	/* Switch MCK on PLLA output */
++	pmc_cfg_mck(MCKR_CSS_SETTINGS, PLL_LOCK_TIMEOUT);
++
++	/* Configure PLLB */
++	pmc_cfg_pllb(PLLB_SETTINGS, PLL_LOCK_TIMEOUT);
++
++	/* Configure CP15 */
++	cp15 = get_cp15();
++	cp15 |= I_CACHE;
++	set_cp15(cp15);
++
++	/* Configure the PIO controller */
++	pio_setup(hw_pio);
++
++	/* Configure the EBI Slave Slot Cycle to 64 */
++	writel( (readl((AT91C_BASE_MATRIX + MATRIX_SCFG3)) & ~0xFF) | 0x40, (AT91C_BASE_MATRIX + MATRIX_SCFG3));
++
++#ifdef CFG_DEBUG
++	/* Enable Debug messages on the DBGU */
++	dbg_init(BAUDRATE(MASTER_CLOCK, 115200));
++
++	dbg_print("Start AT91Bootstrap...\n\r");
++#endif /* CFG_DEBUG */
++
++#ifdef CFG_SDRAM
++	/* Initialize the matrix */
++	writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) | AT91C_EBI_CS1A_SDRAMC, AT91C_BASE_CCFG + CCFG_EBICSA);
++
++	/* Configure SDRAM Controller */
++	sdram_init(	AT91C_SDRAMC_NC_9  |
++				AT91C_SDRAMC_NR_13 |
++				AT91C_SDRAMC_CAS_2 |
++				AT91C_SDRAMC_NB_4_BANKS |
++				AT91C_SDRAMC_DBW_32_BITS |
++				AT91C_SDRAMC_TWR_2 |
++				AT91C_SDRAMC_TRC_7 |
++				AT91C_SDRAMC_TRP_2 |
++				AT91C_SDRAMC_TRCD_2 |
++				AT91C_SDRAMC_TRAS_5 |
++				AT91C_SDRAMC_TXSR_8,		/* Control Register */
++				(MASTER_CLOCK * 7)/1000000,	/* Refresh Timer Register */
++				AT91C_SDRAMC_MD_SDRAM);		/* SDRAM (no low power)   */ 
++
++
++#endif /* CFG_SDRAM */
++}
++#endif /* CFG_HW_INIT */
++
++#ifdef CFG_SDRAM
++/*------------------------------------------------------------------------------*/
++/* \fn    sdramc_hw_init							*/
++/* \brief This function performs SDRAMC HW initialization			*/
++/*------------------------------------------------------------------------------*/
++void sdramc_hw_init(void)
++{
++	/* Configure PIOs */
++/*	const struct pio_desc sdramc_pio[] = {
++		{"D16", AT91C_PIN_PC(16), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D17", AT91C_PIN_PC(17), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D18", AT91C_PIN_PC(18), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D19", AT91C_PIN_PC(19), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D20", AT91C_PIN_PC(20), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D21", AT91C_PIN_PC(21), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D22", AT91C_PIN_PC(22), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D23", AT91C_PIN_PC(23), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D24", AT91C_PIN_PC(24), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D25", AT91C_PIN_PC(25), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D26", AT91C_PIN_PC(26), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D27", AT91C_PIN_PC(27), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D28", AT91C_PIN_PC(28), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D29", AT91C_PIN_PC(29), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D30", AT91C_PIN_PC(30), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D31", AT91C_PIN_PC(31), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++*/
++	/* Configure the SDRAMC PIO controller to output PCK0 */
++/*	pio_setup(sdramc_pio); */
++
++	writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_ASR(0));
++	writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_PDR(0));
++
++}
++#endif /* CFG_SDRAM */
++
++#ifdef CFG_DATAFLASH
++
++/*------------------------------------------------------------------------------*/
++/* \fn    df_recovery								*/
++/* \brief This function erases DataFlash Page 0 if USR PB is pressed 		*/
++/*        during boot sequence							*/
++/*------------------------------------------------------------------------------*/
++void df_recovery(AT91PS_DF pDf)
++{
++#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS0_DATAFLASH)
++	/* Configure PIOs */
++	const struct pio_desc usrpb_pio[] = {
++		{"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the PIO controller */
++	writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
++	pio_setup(usrpb_pio);
++	
++	/* If USR PB is pressed during Boot sequence */
++	/* Erase DataFlash Page 0*/
++	if ( !pio_get_value(AT91C_PIN_PB(10)) )
++		df_page_erase(pDf, 0);
++#endif
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    df_hw_init								*/
++/* \brief This function performs DataFlash HW initialization			*/
++/*------------------------------------------------------------------------------*/
++void df_hw_init(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc df_pio[] = {
++		{"MISO",  AT91C_PIN_PA(0), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"MOSI",  AT91C_PIN_PA(1), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"SPCK",  AT91C_PIN_PA(2), 0, PIO_DEFAULT, PIO_PERIPH_A},
++#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS0_DATAFLASH)
++		{"NPCS0", AT91C_PIN_PA(3), 0, PIO_DEFAULT, PIO_PERIPH_A},
++#endif
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the PIO controller */
++	pio_setup(df_pio);
++}
++#endif /* CFG_DATAFLASH */
++
++
++
++#ifdef CFG_NANDFLASH
++/*------------------------------------------------------------------------------*/
++/* \fn    nand_recovery						*/
++/* \brief This function erases NandFlash Block 0 if USR PB is pressed 		*/
++/*        during boot sequence							*/
++/*------------------------------------------------------------------------------*/
++static void nand_recovery(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc usrpb_pio[] = {
++		{"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the PIO controller */
++	writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
++	pio_setup(usrpb_pio);
++	
++	/* If USR PB is pressed during Boot sequence */
++	/* Erase NandFlash block 0*/
++	if (!pio_get_value(AT91C_PIN_PB(10)) )
++		AT91F_NandEraseBlock0();
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_hw_init							*/
++/* \brief NandFlash HW init							*/
++/*------------------------------------------------------------------------------*/
++void nandflash_hw_init(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc nand_pio[] = {
++		{"RDY_BSY", AT91C_PIN_PC(13), 0, PIO_PULLUP, PIO_INPUT},
++		{"NANDCS",  AT91C_PIN_PC(14), 0, PIO_PULLUP, PIO_OUTPUT},
++		{(char *) 0, 0, 0,  PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Setup Smart Media, first enable the address range of CS3 in HMATRIX user interface */
++	writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) | AT91C_EBI_CS3A_SM, AT91C_BASE_CCFG + CCFG_EBICSA);
++		    
++	/* Configure SMC CS3 */
++ 	writel((AT91C_SM_NWE_SETUP | AT91C_SM_NCS_WR_SETUP | AT91C_SM_NRD_SETUP | AT91C_SM_NCS_RD_SETUP), AT91C_BASE_SMC + SMC_SETUP3);
++  	writel((AT91C_SM_NWE_PULSE | AT91C_SM_NCS_WR_PULSE | AT91C_SM_NRD_PULSE | AT91C_SM_NCS_RD_PULSE), AT91C_BASE_SMC + SMC_PULSE3);
++	writel((AT91C_SM_NWE_CYCLE | AT91C_SM_NRD_CYCLE)						, AT91C_BASE_SMC + SMC_CYCLE3);
++	writel((AT91C_SMC_READMODE | AT91C_SMC_WRITEMODE | AT91C_SMC_NWAITM_NWAIT_DISABLE | 
++  		AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS | AT91C_SM_TDF)						, AT91C_BASE_SMC + SMC_CTRL3);
++
++	/* Configure the PIO controller */
++	writel((1 << AT91C_ID_PIOC), PMC_PCER + AT91C_BASE_PMC);
++	pio_setup(nand_pio);
++	
++	nand_recovery();
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_cfg_16bits_dbw_init						*/
++/* \brief Configure SMC in 16 bits mode						*/
++/*------------------------------------------------------------------------------*/
++void nandflash_cfg_16bits_dbw_init(void)
++{
++	writel(readl(AT91C_BASE_SMC + SMC_CTRL3) | AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS, AT91C_BASE_SMC + SMC_CTRL3);
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_cfg_8bits_dbw_init						*/
++/* \brief Configure SMC in 8 bits mode						*/
++/*------------------------------------------------------------------------------*/
++void nandflash_cfg_8bits_dbw_init(void)
++{
++	writel((readl(AT91C_BASE_SMC + SMC_CTRL3) & ~(AT91C_SMC_DBW)) | AT91C_SMC_DBW_WIDTH_EIGTH_BITS, AT91C_BASE_SMC + SMC_CTRL3);
++}
++
++
++#endif /* #ifdef CFG_NANDFLASH */
+diff --git a/crt0_gnu.S b/crt0_gnu.S
+index 042b617..002feef 100644
+--- a/crt0_gnu.S
++++ b/crt0_gnu.S
+@@ -106,6 +106,13 @@ _relocate_to_sram:
+ #endif /* CFG_NORFLASH */
+ 
+ _setup_clocks:
++/* Test if main osc is bypassed */
++	ldr 	r0,=AT91C_PMC_MOR
++	ldr 	r1, [r0]
++	ldr 	r2,=AT91C_CKGR_OSCBYPASS 
++	ands 	r1, r1, r2
++	bne	_init_data	/* branch if OSCBYPASS=1 */
++
+ /* Test if main oscillator is enabled */
+ 	ldr 	r0,=AT91C_PMC_SR
+ 	ldr 	r1, [r0]
+diff --git a/include/part.h b/include/part.h
+index ba5985a..bbd33fe 100644
+--- a/include/part.h
++++ b/include/part.h
+@@ -35,7 +35,11 @@
+ 
+ #ifdef AT91SAM9260
+ #include "AT91SAM9260_inc.h"
+-#include "at91sam9260ek.h"
++	#ifdef at91sam9260ek
++	#include "at91sam9260ek.h"
++	#elif qil_a9260
++	#include "qil-a9260.h"
++	#endif
+ #endif
+ 
+ #ifdef AT91SAM9XE
+-- 
+1.5.6.3
+

board/calao/qil-a9260/patches/barebox/0001-qil-a9260.patch

@@ -0,0 +1,36 @@
+From d076aa6182dc6df6bb311e60bbddb03573b9483b Mon Sep 17 00:00:00 2001
+From: Gregory Hermant <gregory.hermant@calao-systems.com>
+Date: Fri, 3 Aug 2012 11:25:49 +0200
+Subject: [PATCH] Enable pull-up on Rx serial ports for the CALAO MB-QIL-A9260
+
+
+Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
+---
+ arch/arm/boards/qil-a9260/init.c |    6 ++++++
+ 1 files changed, 6 insertions(+), 0 deletions(-)
+
+diff --git a/arch/arm/boards/qil-a9260/init.c b/arch/arm/boards/qil-a9260/init.c
+index 305d733..b43cace 100644
+--- a/arch/arm/boards/qil-a9260/init.c
++++ b/arch/arm/boards/qil-a9260/init.c
+@@ -196,11 +196,17 @@ device_initcall(qil_a9260_devices_init);
+ static int qil_a9260_console_init(void)
+ {
+ 	at91_register_uart(0, 0);
++	at91_set_A_periph(AT91_PIN_PB14, 1);    /* Enable pull-up on DRXD */
++
+ 	at91_register_uart(1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ 			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ 			   | ATMEL_UART_RI);
++
+ 	at91_register_uart(2, ATMEL_UART_CTS | ATMEL_UART_RTS);
++	at91_set_A_periph(AT91_PIN_PB7, 1);	/* Enable pull-up on RXD1 */
++
+ 	at91_register_uart(3, ATMEL_UART_CTS | ATMEL_UART_RTS);
++	at91_set_A_periph(AT91_PIN_PB9, 1);	/* Enable pull-up on RXD2 */
+ 
+ 	return 0;
+ }
+-- 
+1.5.6.3
+

board/calao/qil-a9260/patches/linux/0001-qil-a9260.patch

@@ -0,0 +1,27 @@
+From fe6432a9728b62bce3db73c5a4efe026018fd495 Mon Sep 17 00:00:00 2001
+From: Gregory Hermant <gregory.hermant@calao-systems.com>
+Date: Fri, 3 Aug 2012 16:45:37 +0200
+Subject: [PATCH] QIL-A9260: rtc modalias m41t48 renamed to rtc-m41t48
+
+
+Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
+---
+ arch/arm/mach-at91/board-qil-a9260.c |    2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
+index bf351e2..c0df05c 100644
+--- a/arch/arm/mach-at91/board-qil-a9260.c
++++ b/arch/arm/mach-at91/board-qil-a9260.c
+@@ -78,7 +78,7 @@ static struct at91_udc_data __initdata ek_udc_data = {
+ static struct spi_board_info ek_spi_devices[] = {
+ #if defined(CONFIG_RTC_DRV_M41T94)
+ 	{	/* M41T94 RTC */
+-		.modalias	= "m41t94",
++		.modalias	= "rtc-m41t94",
+ 		.chip_select	= 0,
+ 		.max_speed_hz	= 1 * 1000 * 1000,
+ 		.bus_num	= 0,
+-- 
+1.5.6.3
+

board/calao/tny-a9g20-lpw/at91bootstrap-1.16-tny-a9g20-lpw.patch

@@ -0,0 +1,551 @@
+From 53bd82b122f4530a98cba45795832820bb1d0b45 Mon Sep 17 00:00:00 2001
+From: Gregory Hermant <gregory.hermant@calao-systems.com>
+Date: Mon, 13 Aug 2012 11:26:10 +0200
+Subject: [PATCH] Add support for the Calao-systems TNY-A9G20-LPW
+
+
+Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
+---
+ board/tny_a9g20_lpw/nandflash/Makefile        |  121 ++++++++++++
+ board/tny_a9g20_lpw/nandflash/tny-a9g20-lpw.h |  114 ++++++++++++
+ board/tny_a9g20_lpw/tny_a9g20_lpw.c           |  243 +++++++++++++++++++++++++
+ crt0_gnu.S                                    |    6 +
+ include/part.h                                |    6 +-
+ 5 files changed, 489 insertions(+), 1 deletion(-)
+ create mode 100644 board/tny_a9g20_lpw/nandflash/Makefile
+ create mode 100644 board/tny_a9g20_lpw/nandflash/tny-a9g20-lpw.h
+ create mode 100644 board/tny_a9g20_lpw/tny_a9g20_lpw.c
+
+diff --git a/board/tny_a9g20_lpw/nandflash/Makefile b/board/tny_a9g20_lpw/nandflash/Makefile
+new file mode 100644
+index 0000000..7efbea7
+--- /dev/null
++++ b/board/tny_a9g20_lpw/nandflash/Makefile
+@@ -0,0 +1,121 @@
++# TODO: set this appropriately for your local toolchain
++ifndef ERASE_FCT
++ERASE_FCT=rm -f
++endif
++ifndef CROSS_COMPILE
++CROSS_COMPILE=arm-elf-
++endif
++
++TOOLCHAIN=gcc
++
++BOOTSTRAP_PATH=../../..
++
++# NandFlashBoot Configuration for AT91SAM9260EK
++
++# Target name (case sensitive!!!)
++TARGET=AT91SAM9G20
++# Board name (case sensitive!!!)
++BOARD=tny_a9g20_lpw
++# Link Address and Top_of_Memory
++LINK_ADDR=0x200000
++TOP_OF_MEMORY=0x301000
++# Name of current directory
++PROJECT=nandflash
++
++ifndef BOOT_NAME
++BOOT_NAME=$(PROJECT)_$(BOARD)
++endif
++
++INCL=./$(BOOTSTRAP_PATH)/board/$(BOARD)/$(PROJECT)
++
++ifeq ($(TOOLCHAIN), gcc)
++
++AS=$(CROSS_COMPILE)gcc
++CC=$(CROSS_COMPILE)gcc
++LD=$(CROSS_COMPILE)gcc
++NM= $(CROSS_COMPILE)nm
++SIZE=$(CROSS_COMPILE)size
++OBJCOPY=$(CROSS_COMPILE)objcopy
++OBJDUMP=$(CROSS_COMPILE)objdump
++CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL)
++ASFLAGS=-g -mcpu=arm926ej-s -c -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
++
++# Linker flags.
++#  -Wl,...:     tell GCC to pass this to linker.
++#    -Map:      create map file
++#    --cref:    add cross reference to map file
++LDFLAGS+=-nostartfiles -nostdlib -Wl,-Map=$(BOOT_NAME).map,--cref
++LDFLAGS+=-T $(BOOTSTRAP_PATH)/elf32-littlearm.lds -Ttext $(LINK_ADDR)
++OBJS=crt0_gnu.o
++
++endif
++
++OBJS+=\
++	$(BOARD).o \
++	main.o \
++	gpio.o \
++	pmc.o \
++	debug.o \
++	sdramc.o \
++	nandflash.o \
++	_udivsi3.o \
++	_umodsi3.o \
++	div0.o \
++	udiv.o \
++	string.o
++
++rebuild: clean all
++
++all: 	$(BOOT_NAME)
++
++ifeq ($(TOOLCHAIN), gcc)
++$(BOOT_NAME): $(OBJS)
++	$(LD) $(LDFLAGS) -n -o $(BOOT_NAME).elf $(OBJS)
++	$(OBJCOPY) --strip-debug --strip-unneeded $(BOOT_NAME).elf -O binary $(BOOT_NAME).bin
++endif
++
++
++$(BOARD).o: $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c -o $(BOARD).o
++
++main.o: $(BOOTSTRAP_PATH)/main.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/main.c -o main.o
++
++gpio.o: $(BOOTSTRAP_PATH)/driver/gpio.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/gpio.c -o gpio.o
++
++pmc.o:  $(BOOTSTRAP_PATH)/driver/pmc.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/pmc.c -o pmc.o
++
++debug.o: $(BOOTSTRAP_PATH)/driver/debug.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/debug.c -o debug.o
++
++sdramc.o:  $(BOOTSTRAP_PATH)/driver/sdramc.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/sdramc.c -o sdramc.o
++
++dataflash.o:  $(BOOTSTRAP_PATH)/driver/dataflash.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/dataflash.c -o dataflash.o
++
++nandflash.o:  $(BOOTSTRAP_PATH)/driver/nandflash.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/nandflash.c -o nandflash.o
++
++crt0_gnu.o:  $(BOOTSTRAP_PATH)/crt0_gnu.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/crt0_gnu.S -o crt0_gnu.o
++
++div0.o:  $(BOOTSTRAP_PATH)/lib/div0.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/div0.c -o div0.o
++
++string.o:  $(BOOTSTRAP_PATH)/lib/string.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/string.c -o string.o
++
++udiv.o:  $(BOOTSTRAP_PATH)/lib/udiv.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/udiv.c -o udiv.o
++
++_udivsi3.o:  $(BOOTSTRAP_PATH)/lib/_udivsi3.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_udivsi3.S -o _udivsi3.o
++
++_umodsi3.o:  $(BOOTSTRAP_PATH)/lib/_umodsi3.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_umodsi3.S -o _umodsi3.o
++
++clean:
++	$(ERASE_FCT) *.o *.bin *.elf *.map
+diff --git a/board/tny_a9g20_lpw/nandflash/tny-a9g20-lpw.h b/board/tny_a9g20_lpw/nandflash/tny-a9g20-lpw.h
+new file mode 100644
+index 0000000..b1f8a1d
+--- /dev/null
++++ b/board/tny_a9g20_lpw/nandflash/tny-a9g20-lpw.h
+@@ -0,0 +1,114 @@
++/* ----------------------------------------------------------------------------
++ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
++ * ----------------------------------------------------------------------------
++ * Copyright (c) 2008, Atmel Corporation
++
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ *
++ * - Redistributions of source code must retain the above copyright notice,
++ * this list of conditions and the disclaimer below.
++ *
++ * Atmel's name may not be used to endorse or promote products derived from
++ * this software without specific prior written permission.
++ *
++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ----------------------------------------------------------------------------
++ * File Name           : tny-a9g20-lpw.h
++ * Object              :
++ * Creation            : GH August 13th 2012
++ *-----------------------------------------------------------------------------
++ */
++#ifndef _TNY_A9G20_LPW_H
++#define _TNY_A9G20_LPW_H
++
++/* ******************************************************************* */
++/* PMC Settings                                                        */
++/*                                                                     */
++/* The main oscillator is enabled as soon as possible in the c_startup */
++/* and MCK is switched on the main oscillator.                         */
++/* PLL initialization is done later in the hw_init() function          */
++/* ******************************************************************* */
++#define MASTER_CLOCK		(100000000)
++#define PLL_LOCK_TIMEOUT	1000000
++
++/* set PLLA to 800Mhz from MAINCK= 12Mhz MULA=199 (0xC7+1= 200), DIVA=0x03 (Fplla=12Mhz x [(199+1)/3]=800Mhz) */
++#define PLLA_SETTINGS   0x20C73F03
++#define PLLB_SETTINGS   0x100F3F02
++
++/* Switch MCK on PLLA output PCK = PLLA/2 = 3 * MCK */
++/* LP-SDRAM (fmax=100Mhz) PDIV=0 => PRESCALER CLK=PCLK; */
++/* MDIV = 2 => PRESCALER CLK / 4 = MCLK=100Mhz */
++/* PRESCALER CLK = PLLA (800Mhz) / 2 (PRES=1) = 400Mhz */
++#define MCKR_SETTINGS           0x0204 
++#define MCKR_CSS_SETTINGS       (AT91C_PMC_CSS_PLLA_CLK | MCKR_SETTINGS)
++
++/* ******************************************************************* */
++/* NandFlash Settings                                                  */
++/*                                                                     */
++/* ******************************************************************* */
++#define AT91C_SMARTMEDIA_BASE	0x40000000
++
++#define AT91_SMART_MEDIA_ALE    (1 << 21)	/* our ALE is AD21 */
++#define AT91_SMART_MEDIA_CLE    (1 << 22)	/* our CLE is AD22 */
++
++#define NAND_DISABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_SODR = AT91C_PIO_PC14;} while(0)
++#define NAND_ENABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_CODR = AT91C_PIO_PC14;} while(0)
++
++#define NAND_WAIT_READY() while (!(*(volatile unsigned int *)AT91C_PIOC_PDSR & AT91C_PIO_PC13))
++
++
++/* ******************************************************************** */
++/* SMC Chip Select 3 Timings for NandFlash for MASTER_CLOCK = 100000000.*/
++/* Please refer to SMC section in AT91SAM9 datasheet to learn how 	*/
++/* to generate these values. 						*/
++/* ******************************************************************** */
++#define AT91C_SM_NWE_SETUP	(1 << 0)
++#define AT91C_SM_NCS_WR_SETUP	(0 << 8)
++#define AT91C_SM_NRD_SETUP	(1 << 16)
++#define AT91C_SM_NCS_RD_SETUP	(0 << 24)
++  
++#define AT91C_SM_NWE_PULSE 	(3 << 0)
++#define AT91C_SM_NCS_WR_PULSE	(3 << 8)
++#define AT91C_SM_NRD_PULSE	(3 << 16)
++#define AT91C_SM_NCS_RD_PULSE	(3 << 24)
++  
++#define AT91C_SM_NWE_CYCLE 	(5 << 0)
++#define AT91C_SM_NRD_CYCLE	(5 << 16)
++
++#define AT91C_SM_TDF	        (2 << 16)
++
++/* ******************************************************************* */
++/* BootStrap Settings                                                  */
++/*                                                                     */
++/* ******************************************************************* */
++#define IMG_ADDRESS 		0x20000			/* Image Address in NandFlash */
++#define	IMG_SIZE		0x40000			/* Image Size in NandFlash */
++
++#define MACH_TYPE		0x80B			/* TNY-A9G20 */
++#define JUMP_ADDR		0x23F00000		/* Final Jump Address */
++
++/* ******************************************************************* */
++/* Application Settings                                                */
++/* ******************************************************************* */
++#undef CFG_DEBUG
++#undef CFG_DATAFLASH
++
++#define CFG_NANDFLASH
++#undef	NANDFLASH_SMALL_BLOCKS	/* NANDFLASH_LARGE_BLOCKS used instead */
++
++#define	CFG_SDRAM
++#define	CFG_HW_INIT
++
++#endif	/* _TNY_A9G20_LPW_H */
+diff --git a/board/tny_a9g20_lpw/tny_a9g20_lpw.c b/board/tny_a9g20_lpw/tny_a9g20_lpw.c
+new file mode 100644
+index 0000000..cef9055
+--- /dev/null
++++ b/board/tny_a9g20_lpw/tny_a9g20_lpw.c
+@@ -0,0 +1,243 @@
++/* ----------------------------------------------------------------------------
++ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
++ * ----------------------------------------------------------------------------
++ * Copyright (c) 2008, Atmel Corporation
++
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ *
++ * - Redistributions of source code must retain the above copyright notice,
++ * this list of conditions and the disclaimer below.
++ *
++ * Atmel's name may not be used to endorse or promote products derived from
++ * this software without specific prior written permission.
++ *
++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ----------------------------------------------------------------------------
++ * File Name           : tny_a9g20_lpw.c
++ * Object              :
++ * Creation            : GH August 13th 2012
++ *-----------------------------------------------------------------------------
++ */
++#include "../../include/part.h"
++#include "../../include/gpio.h"
++#include "../../include/pmc.h"
++#include "../../include/debug.h"
++#include "../../include/sdramc.h"
++#include "../../include/main.h"
++#ifdef CFG_NANDFLASH
++#include "../../include/nandflash.h"
++#endif
++
++static inline unsigned int get_cp15(void)
++{
++	unsigned int value;
++	__asm__("mrc p15, 0, %0, c1, c0, 0" : "=r" (value));
++	return value;
++}
++
++static inline void set_cp15(unsigned int value)
++{
++	__asm__("mcr p15, 0, %0, c1, c0, 0" : : "r" (value));
++}
++
++#ifdef CFG_HW_INIT
++/*----------------------------------------------------------------------------*/
++/* \fn    hw_init							      */
++/* \brief This function performs very low level HW initialization	      */
++/* This function is invoked as soon as possible during the c_startup	      */
++/* The bss segment must be initialized					      */
++/*----------------------------------------------------------------------------*/
++void hw_init(void)
++{
++	unsigned int cp15;
++	
++	/* Configure PIOs */
++	const struct pio_desc hw_pio[] = {
++#ifdef CFG_DEBUG
++		{"RXD", AT91C_PIN_PB(14), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"TXD", AT91C_PIN_PB(15), 0, PIO_DEFAULT, PIO_PERIPH_A},
++#endif
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Disable watchdog */
++	writel(AT91C_WDTC_WDDIS, AT91C_BASE_WDTC + WDTC_WDMR);
++
++	/* At this stage the main oscillator is supposed to be enabled
++	 * PCK = MCK = MOSC */
++	writel(0x00, AT91C_BASE_PMC + PMC_PLLICPR);
++
++	/* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */
++	pmc_cfg_plla(PLLA_SETTINGS, PLL_LOCK_TIMEOUT);
++
++	/* PCK = PLLA/2 = 3 * MCK */
++	pmc_cfg_mck(MCKR_SETTINGS, PLL_LOCK_TIMEOUT);
++	/* Switch MCK on PLLA output */
++	pmc_cfg_mck(MCKR_CSS_SETTINGS, PLL_LOCK_TIMEOUT);
++
++	/* Configure PLLB */
++	pmc_cfg_pllb(PLLB_SETTINGS, PLL_LOCK_TIMEOUT);
++
++	/* Configure CP15 */
++	cp15 = get_cp15();
++	cp15 |= I_CACHE;
++	set_cp15(cp15);
++
++	/* Configure the PIO controller */
++	pio_setup(hw_pio);
++
++	/* Configure the EBI Slave Slot Cycle to 64 */
++	writel((readl((AT91C_BASE_MATRIX + MATRIX_SCFG3)) & ~0xFF) | 0x40, (AT91C_BASE_MATRIX + MATRIX_SCFG3));
++
++#ifdef CFG_DEBUG
++	/* Enable Debug messages on the DBGU */
++	dbg_init(BAUDRATE(MASTER_CLOCK, 115200));
++
++	dbg_print("Start AT91Bootstrap...\n\r");
++#endif /* CFG_DEBUG */
++
++#ifdef CFG_SDRAM
++	/* Initialize the matrix (slow slew rate enabled and LPSDRAM memory voltage = 1.8V) */
++	writel(((readl(AT91C_BASE_CCFG + CCFG_EBICSA)) | AT91C_EBI_CS1A_SDRAMC | (1<<17)) & ~0x00010000, AT91C_BASE_CCFG + CCFG_EBICSA);
++
++	/* Configure SDRAM Controller */
++	sdram_init(	AT91C_SDRAMC_NC_9  |
++				AT91C_SDRAMC_NR_13 |
++				AT91C_SDRAMC_CAS_3 |
++				AT91C_SDRAMC_NB_4_BANKS |
++				AT91C_SDRAMC_DBW_32_BITS |
++				AT91C_SDRAMC_TWR_2 |
++				AT91C_SDRAMC_TRC_7 |
++				AT91C_SDRAMC_TRP_2 |
++				AT91C_SDRAMC_TRCD_2 |
++				AT91C_SDRAMC_TRAS_5 |
++				AT91C_SDRAMC_TXSR_8,		/* Control Register */
++				(MASTER_CLOCK * 7)/1000000,	/* Refresh Timer Register */
++                                AT91C_SDRAMC_MD_LOW_POWER_SDRAM); /* SDRAM (low power)   */
++
++#endif /* CFG_SDRAM */
++}
++#endif /* CFG_HW_INIT */
++
++#ifdef CFG_SDRAM
++/*------------------------------------------------------------------------------*/
++/* \fn    sdramc_hw_init							*/
++/* \brief This function performs SDRAMC HW initialization			*/
++/*------------------------------------------------------------------------------*/
++void sdramc_hw_init(void)
++{
++	/* Configure PIOs */
++/*	const struct pio_desc sdramc_pio[] = {
++		{"D16", AT91C_PIN_PC(16), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D17", AT91C_PIN_PC(17), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D18", AT91C_PIN_PC(18), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D19", AT91C_PIN_PC(19), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D20", AT91C_PIN_PC(20), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D21", AT91C_PIN_PC(21), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D22", AT91C_PIN_PC(22), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D23", AT91C_PIN_PC(23), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D24", AT91C_PIN_PC(24), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D25", AT91C_PIN_PC(25), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D26", AT91C_PIN_PC(26), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D27", AT91C_PIN_PC(27), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D28", AT91C_PIN_PC(28), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D29", AT91C_PIN_PC(29), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D30", AT91C_PIN_PC(30), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D31", AT91C_PIN_PC(31), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++*/
++	/* Configure the SDRAMC PIO controller to output PCK0 */
++/*	pio_setup(sdramc_pio); */
++
++	writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_ASR(0));
++	writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_PDR(0));
++
++}
++#endif /* CFG_SDRAM */
++
++#ifdef CFG_NANDFLASH
++/*------------------------------------------------------------------------------*/
++/* \fn    nand_recovery						*/
++/* \brief This function erases NandFlash Block 0 if BP4 is pressed 		*/
++/*        during boot sequence							*/
++/*------------------------------------------------------------------------------*/
++static void nand_recovery(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc bp4_pio[] = {
++		{"BP4", AT91C_PIN_PA(31), 0, PIO_PULLUP, PIO_INPUT},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the PIO controller */
++	writel((1 << AT91C_ID_PIOA), PMC_PCER + AT91C_BASE_PMC);
++	pio_setup(bp4_pio);
++	
++	/* If BP4 is pressed during Boot sequence */
++	/* Erase NandFlash block 0*/
++	if (!pio_get_value(AT91C_PIN_PA(31)) )
++		AT91F_NandEraseBlock0();
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_hw_init							*/
++/* \brief NandFlash HW init							*/
++/*------------------------------------------------------------------------------*/
++void nandflash_hw_init(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc nand_pio[] = {
++		{"RDY_BSY", AT91C_PIN_PC(13), 0, PIO_PULLUP, PIO_INPUT},
++		{"NANDCS",  AT91C_PIN_PC(14), 0, PIO_PULLUP, PIO_OUTPUT},
++		{(char *) 0, 0, 0,  PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Setup Smart Media, first enable the address range of CS3 in HMATRIX user interface */
++	writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) | AT91C_EBI_CS3A_SM, AT91C_BASE_CCFG + CCFG_EBICSA);
++		    
++	/* Configure SMC CS3 */
++ 	writel((AT91C_SM_NWE_SETUP | AT91C_SM_NCS_WR_SETUP | AT91C_SM_NRD_SETUP | AT91C_SM_NCS_RD_SETUP), AT91C_BASE_SMC + SMC_SETUP3);
++  	writel((AT91C_SM_NWE_PULSE | AT91C_SM_NCS_WR_PULSE | AT91C_SM_NRD_PULSE | AT91C_SM_NCS_RD_PULSE), AT91C_BASE_SMC + SMC_PULSE3);
++	writel((AT91C_SM_NWE_CYCLE | AT91C_SM_NRD_CYCLE)						, AT91C_BASE_SMC + SMC_CYCLE3);
++	writel((AT91C_SMC_READMODE | AT91C_SMC_WRITEMODE | AT91C_SMC_NWAITM_NWAIT_DISABLE | 
++  		AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS | AT91C_SM_TDF)						, AT91C_BASE_SMC + SMC_CTRL3);
++
++	/* Configure the PIO controller */
++	writel((1 << AT91C_ID_PIOC), PMC_PCER + AT91C_BASE_PMC);
++	pio_setup(nand_pio);
++	
++	nand_recovery();
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_cfg_16bits_dbw_init						*/
++/* \brief Configure SMC in 16 bits mode						*/
++/*------------------------------------------------------------------------------*/
++void nandflash_cfg_16bits_dbw_init(void)
++{
++	writel(readl(AT91C_BASE_SMC + SMC_CTRL3) | AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS, AT91C_BASE_SMC + SMC_CTRL3);
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_cfg_8bits_dbw_init						*/
++/* \brief Configure SMC in 8 bits mode						*/
++/*------------------------------------------------------------------------------*/
++void nandflash_cfg_8bits_dbw_init(void)
++{
++	writel((readl(AT91C_BASE_SMC + SMC_CTRL3) & ~(AT91C_SMC_DBW)) | AT91C_SMC_DBW_WIDTH_EIGTH_BITS, AT91C_BASE_SMC + SMC_CTRL3);
++}
++
++#endif /* #ifdef CFG_NANDFLASH */
+diff --git a/crt0_gnu.S b/crt0_gnu.S
+index 042b617..c6cd49d 100644
+--- a/crt0_gnu.S
++++ b/crt0_gnu.S
+@@ -106,6 +106,12 @@ _relocate_to_sram:
+ #endif /* CFG_NORFLASH */
+ 
+ _setup_clocks:
++/* Test if main osc is bypassed */
++	ldr 	r0,=AT91C_PMC_MOR
++	ldr 	r1, [r0]
++	ldr 	r2,=AT91C_CKGR_OSCBYPASS 
++	ands 	r1, r1, r2
++	bne	_init_data	/* branch if OSCBYPASS=1 */
+ /* Test if main oscillator is enabled */
+ 	ldr 	r0,=AT91C_PMC_SR
+ 	ldr 	r1, [r0]
+diff --git a/include/part.h b/include/part.h
+index ba5985a..ab79af1 100644
+--- a/include/part.h
++++ b/include/part.h
+@@ -46,7 +46,11 @@
+ 
+ #ifdef AT91SAM9G20
+ #include "AT91SAM9260_inc.h"
+-#include "at91sam9g20ek.h"
++	#ifdef at91sam9g20ek
++	#include "at91sam9g20ek.h"
++	#elif tny_a9g20_lpw
++	#include "tny-a9g20-lpw.h"
++	#endif
+ #endif
+ 
+ #ifdef AT91SAM9261
+-- 
+1.7.9.5
+

board/calao/tny-a9g20-lpw/linux-3.9.config

@@ -0,0 +1,187 @@
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EMBEDDED=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_AT91=y
+CONFIG_SOC_AT91SAM9260=y
+CONFIG_SOC_AT91SAM9263=y
+CONFIG_SOC_AT91SAM9G45=y
+CONFIG_SOC_AT91SAM9X5=y
+CONFIG_SOC_AT91SAM9N12=y
+CONFIG_MACH_AT91SAM_DT=y
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AT91_TIMER_HZ=128
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_UACCESS_WITH_MEMCPY=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
+CONFIG_KEXEC=y
+CONFIG_AUTO_ZRELADDR=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+CONFIG_IPV6=y
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+CONFIG_IPV6_SIT_6RD=y
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_GLUEBI=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_ATMEL_PWM=y
+CONFIG_ATMEL_TCLIB=y
+CONFIG_EEPROM_93CX6=m
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+CONFIG_DAVICOM_PHY=y
+CONFIG_MICREL_PHY=y
+# CONFIG_WLAN is not set
+CONFIG_INPUT_POLLDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=480
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=272
+CONFIG_INPUT_JOYDEV=y
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_SERIO is not set
+CONFIG_LEGACY_PTY_COUNT=4
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_GPIO=y
+CONFIG_SPI=y
+CONFIG_SPI_ATMEL=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_AT91SAM9X_WATCHDOG=y
+CONFIG_SSB=m
+CONFIG_FB=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_ATMEL=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_ATMEL_LCDC=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_ACORN_8x8=y
+CONFIG_FONT_MINI_4x6=y
+CONFIG_LOGO=y
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_ACM=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_FTDI_SIO=y
+CONFIG_USB_SERIAL_PL2303=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_AT91=m
+CONFIG_USB_ETH=m
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_CDC_COMPOSITE=m
+CONFIG_USB_G_ACM_MS=m
+CONFIG_USB_G_MULTI=m
+CONFIG_USB_G_MULTI_CDC=y
+CONFIG_MMC=y
+CONFIG_MMC_ATMELMCI=y
+CONFIG_MMC_SPI=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_AT91RM9200=y
+CONFIG_RTC_DRV_AT91SAM9=y
+CONFIG_DMADEVICES=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_FANOTIFY=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_USER=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_CCITT=m
+CONFIG_AVERAGE=y

board/calao/usb-a9260/at91bootstrap-1.16-usb-a9260.patch

@@ -0,0 +1,603 @@
+From 43e8c90f13806405bde8eaaf3a956d0ddc806f64 Mon Sep 17 00:00:00 2001
+From: Gregory Hermant <gregory.hermant@calao-systems.com>
+Date: Tue, 2 Oct 2012 09:19:15 +0200
+Subject: [PATCH] Add support for the USB-A9260
+
+
+Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
+---
+ board/usb_a9260/nandflash/Makefile    |  122 ++++++++++++++
+ board/usb_a9260/nandflash/usb-a9260.h |  109 ++++++++++++
+ board/usb_a9260/usb_a9260.c           |  298 +++++++++++++++++++++++++++++++++
+ crt0_gnu.S                            |    7 +
+ include/part.h                        |    6 +-
+ 5 files changed, 541 insertions(+), 1 deletion(-)
+ create mode 100644 board/usb_a9260/nandflash/Makefile
+ create mode 100644 board/usb_a9260/nandflash/usb-a9260.h
+ create mode 100644 board/usb_a9260/usb_a9260.c
+
+diff --git a/board/usb_a9260/nandflash/Makefile b/board/usb_a9260/nandflash/Makefile
+new file mode 100644
+index 0000000..02f4b50
+--- /dev/null
++++ b/board/usb_a9260/nandflash/Makefile
+@@ -0,0 +1,122 @@
++# TODO: set this appropriately for your local toolchain
++ifndef ERASE_FCT
++ERASE_FCT=rm -f
++endif
++ifndef CROSS_COMPILE
++CROSS_COMPILE=arm-elf-
++endif
++
++TOOLCHAIN=gcc
++
++BOOTSTRAP_PATH=../../..
++
++# NandFlashBoot Configuration for USB-A9260
++
++# Target name (case sensitive!!!)
++TARGET=AT91SAM9260
++# Board name (case sensitive!!!)
++BOARD=usb_a9260
++# Link Address and Top_of_Memory
++LINK_ADDR=0x200000
++TOP_OF_MEMORY=0x301000
++# Name of current directory
++PROJECT=nandflash
++
++ifndef BOOT_NAME
++BOOT_NAME=$(PROJECT)_$(BOARD)
++endif
++
++INCL=./$(BOOTSTRAP_PATH)/board/$(BOARD)/$(PROJECT)
++
++ifeq ($(TOOLCHAIN), gcc)
++
++AS=$(CROSS_COMPILE)gcc
++CC=$(CROSS_COMPILE)gcc
++LD=$(CROSS_COMPILE)gcc
++NM= $(CROSS_COMPILE)nm
++SIZE=$(CROSS_COMPILE)size
++OBJCOPY=$(CROSS_COMPILE)objcopy
++OBJDUMP=$(CROSS_COMPILE)objdump
++CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL)
++ASFLAGS=-g -mcpu=arm926ej-s -c -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
++
++# Linker flags.
++#  -Wl,...:     tell GCC to pass this to linker.
++#    -Map:      create map file
++#    --cref:    add cross reference to map file
++LDFLAGS+=-nostartfiles -nostdlib -Wl,-Map=$(BOOT_NAME).map,--cref
++LDFLAGS+=-T $(BOOTSTRAP_PATH)/elf32-littlearm.lds -Ttext $(LINK_ADDR)
++OBJS=crt0_gnu.o
++
++endif
++
++OBJS+=\
++	$(BOARD).o \
++	main.o \
++	gpio.o \
++	pmc.o \
++	debug.o \
++	sdramc.o \
++	nandflash.o \
++	_udivsi3.o \
++	_umodsi3.o \
++	div0.o \
++	udiv.o \
++	string.o
++
++
++rebuild: clean all
++
++all: 	$(BOOT_NAME)
++
++ifeq ($(TOOLCHAIN), gcc)
++$(BOOT_NAME): $(OBJS)
++	$(LD) $(LDFLAGS) -n -o $(BOOT_NAME).elf $(OBJS)
++	$(OBJCOPY) --strip-debug --strip-unneeded $(BOOT_NAME).elf -O binary $(BOOT_NAME).bin
++endif
++
++
++$(BOARD).o: $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c -o $(BOARD).o
++
++main.o: $(BOOTSTRAP_PATH)/main.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/main.c -o main.o
++
++gpio.o: $(BOOTSTRAP_PATH)/driver/gpio.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/gpio.c -o gpio.o
++
++pmc.o:  $(BOOTSTRAP_PATH)/driver/pmc.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/pmc.c -o pmc.o
++
++debug.o: $(BOOTSTRAP_PATH)/driver/debug.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/debug.c -o debug.o
++
++sdramc.o:  $(BOOTSTRAP_PATH)/driver/sdramc.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/sdramc.c -o sdramc.o
++
++dataflash.o:  $(BOOTSTRAP_PATH)/driver/dataflash.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/dataflash.c -o dataflash.o
++
++nandflash.o:  $(BOOTSTRAP_PATH)/driver/nandflash.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/nandflash.c -o nandflash.o
++
++crt0_gnu.o:  $(BOOTSTRAP_PATH)/crt0_gnu.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/crt0_gnu.S -o crt0_gnu.o
++
++div0.o:  $(BOOTSTRAP_PATH)/lib/div0.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/div0.c -o div0.o
++
++string.o:  $(BOOTSTRAP_PATH)/lib/string.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/string.c -o string.o
++
++udiv.o:  $(BOOTSTRAP_PATH)/lib/udiv.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/udiv.c -o udiv.o
++
++_udivsi3.o:  $(BOOTSTRAP_PATH)/lib/_udivsi3.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_udivsi3.S -o _udivsi3.o
++
++_umodsi3.o:  $(BOOTSTRAP_PATH)/lib/_umodsi3.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_umodsi3.S -o _umodsi3.o
++
++clean:
++	$(ERASE_FCT) *.o *.bin *.elf *.map
+diff --git a/board/usb_a9260/nandflash/usb-a9260.h b/board/usb_a9260/nandflash/usb-a9260.h
+new file mode 100644
+index 0000000..2aaf759
+--- /dev/null
++++ b/board/usb_a9260/nandflash/usb-a9260.h
+@@ -0,0 +1,109 @@
++/* ----------------------------------------------------------------------------
++ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
++ * ----------------------------------------------------------------------------
++ * Copyright (c) 2006, Atmel Corporation
++
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ *
++ * - Redistributions of source code must retain the above copyright notice,
++ * this list of conditions and the disclaimer below.
++ *
++ * Atmel's name may not be used to endorse or promote products derived from
++ * this software without specific prior written permission.
++ *
++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ----------------------------------------------------------------------------
++ * File Name           : usb-a9260.h
++ * Object              :
++ * Creation            : GH Oct 1th 2012
++ *-----------------------------------------------------------------------------
++ */
++#ifndef _USB_A9260_H
++#define _USB_A9260_H
++
++/* ******************************************************************* */
++/* PMC Settings                                                        */
++/*                                                                     */
++/* The main oscillator is enabled as soon as possible in the c_startup */
++/* and MCK is switched on the main oscillator.                         */
++/* PLL initialization is done later in the hw_init() function          */
++/* ******************************************************************* */
++#define MASTER_CLOCK		(180000000/2)
++#define PLL_LOCK_TIMEOUT	1000000
++
++#define PLLA_SETTINGS	0x20593F06
++#define PLLB_SETTINGS	0x10483F0E
++
++/* Switch MCK on PLLA output PCK = PLLA = 2 * MCK */
++#define MCKR_SETTINGS		(AT91C_PMC_PRES_CLK | AT91C_PMC_MDIV_2)
++#define MCKR_CSS_SETTINGS	(AT91C_PMC_CSS_PLLA_CLK | MCKR_SETTINGS)
++
++/* ******************************************************************* */
++/* NandFlash Settings                                                  */
++/*                                                                     */
++/* ******************************************************************* */
++#define AT91C_SMARTMEDIA_BASE	0x40000000
++
++#define AT91_SMART_MEDIA_ALE    (1 << 21)	/* our ALE is AD21 */
++#define AT91_SMART_MEDIA_CLE    (1 << 22)	/* our CLE is AD22 */
++
++#define NAND_DISABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_SODR = AT91C_PIO_PC14;} while(0)
++#define NAND_ENABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_CODR = AT91C_PIO_PC14;} while(0)
++
++#define NAND_WAIT_READY() while (!(*(volatile unsigned int *)AT91C_PIOC_PDSR & AT91C_PIO_PC13))
++
++
++/* ******************************************************************** */
++/* SMC Chip Select 3 Timings for NandFlash for MASTER_CLOCK = 90000000.*/
++/* Please refer to SMC section in AT91SAM datasheet to learn how 	*/
++/* to generate these values. 						*/
++/* ******************************************************************** */
++#define AT91C_SM_NWE_SETUP	(1 << 0)
++#define AT91C_SM_NCS_WR_SETUP	(0 << 8)
++#define AT91C_SM_NRD_SETUP	(1 << 16)
++#define AT91C_SM_NCS_RD_SETUP	(0 << 24)
++  
++#define AT91C_SM_NWE_PULSE 	(3 << 0)
++#define AT91C_SM_NCS_WR_PULSE	(3 << 8)
++#define AT91C_SM_NRD_PULSE	(3 << 16)
++#define AT91C_SM_NCS_RD_PULSE	(3 << 24)
++  
++#define AT91C_SM_NWE_CYCLE 	(5 << 0)
++#define AT91C_SM_NRD_CYCLE	(5 << 16)
++#define AT91C_SM_TDF	        (2 << 16)
++
++/* ******************************************************************* */
++/* BootStrap Settings                                                  */
++/*                                                                     */
++/* ******************************************************************* */
++#define IMG_ADDRESS 		0x20000		/* Image Address in NandFlash */
++#define	IMG_SIZE		0x40000		/* Image Size in NandFlash    */
++
++#define MACH_TYPE       	0x6AD		/* USB-A9260 */
++#define JUMP_ADDR		0x23F00000	/* Final Jump Address 	      */
++
++/* ******************************************************************* */
++/* Application Settings                                                */
++/* ******************************************************************* */
++#undef CFG_DEBUG
++#undef CFG_DATAFLASH
++
++#define CFG_NANDFLASH
++#undef	NANDFLASH_SMALL_BLOCKS	/* NANDFLASH_LARGE_BLOCKS used instead */
++
++#define CFG_HW_INIT
++#define CFG_SDRAM
++
++#endif	/* _USB_A9260_H */
+diff --git a/board/usb_a9260/usb_a9260.c b/board/usb_a9260/usb_a9260.c
+new file mode 100644
+index 0000000..de30f0b
+--- /dev/null
++++ b/board/usb_a9260/usb_a9260.c
+@@ -0,0 +1,298 @@
++/* ----------------------------------------------------------------------------
++ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
++ * ----------------------------------------------------------------------------
++ * Copyright (c) 2006, Atmel Corporation
++
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ *
++ * - Redistributions of source code must retain the above copyright notice,
++ * this list of conditions and the disclaiimer below.
++ *
++ * Atmel's name may not be used to endorse or promote products derived from
++ * this software without specific prior written permission.
++ *
++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ----------------------------------------------------------------------------
++ * File Name           : usb_a9260.c
++ * Object              :
++ * Creation            : GH Oct 1th 2012
++ *-----------------------------------------------------------------------------
++ */
++#include "../../include/part.h"
++#include "../../include/gpio.h"
++#include "../../include/pmc.h"
++#include "../../include/debug.h"
++#include "../../include/sdramc.h"
++#include "../../include/main.h"
++#ifdef CFG_NANDFLASH
++#include "../../include/nandflash.h"
++#endif
++#ifdef CFG_DATAFLASH
++#include "../../include/dataflash.h"
++#endif
++
++static inline unsigned int get_cp15(void)
++{
++	unsigned int value;
++	__asm__("mrc p15, 0, %0, c1, c0, 0" : "=r" (value));
++	return value;
++}
++
++static inline void set_cp15(unsigned int value)
++{
++	__asm__("mcr p15, 0, %0, c1, c0, 0" : : "r" (value));
++}
++
++#ifdef CFG_HW_INIT
++/*----------------------------------------------------------------------------*/
++/* \fn    hw_init							      */
++/* \brief This function performs very low level HW initialization	      */
++/* This function is invoked as soon as possible during the c_startup	      */
++/* The bss segment must be initialized					      */
++/*----------------------------------------------------------------------------*/
++void hw_init(void)
++{
++	unsigned int cp15;
++	
++	/* Configure PIOs */
++	const struct pio_desc hw_pio[] = {
++#ifdef CFG_DEBUG
++		{"RXD", AT91C_PIN_PB(14), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"TXD", AT91C_PIN_PB(15), 0, PIO_DEFAULT, PIO_PERIPH_A},
++#endif
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Disable watchdog */
++	writel(AT91C_WDTC_WDDIS, AT91C_BASE_WDTC + WDTC_WDMR);
++
++	/* At this stage the main oscillator is supposed to be enabled
++	 * PCK = MCK = MOSC */
++
++	/* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */
++	pmc_cfg_plla(PLLA_SETTINGS, PLL_LOCK_TIMEOUT);
++
++	/* PCK = PLLA = 2 * MCK */
++	pmc_cfg_mck(MCKR_SETTINGS, PLL_LOCK_TIMEOUT);
++	/* Switch MCK on PLLA output */
++	pmc_cfg_mck(MCKR_CSS_SETTINGS, PLL_LOCK_TIMEOUT);
++
++	/* Configure PLLB */
++	pmc_cfg_pllb(PLLB_SETTINGS, PLL_LOCK_TIMEOUT);
++
++	/* Configure CP15 */
++	cp15 = get_cp15();
++	cp15 |= I_CACHE;
++	set_cp15(cp15);
++
++	/* Configure the PIO controller */
++	pio_setup(hw_pio);
++
++	/* Configure the EBI Slave Slot Cycle to 64 */
++	writel( (readl((AT91C_BASE_MATRIX + MATRIX_SCFG3)) & ~0xFF) | 0x40, (AT91C_BASE_MATRIX + MATRIX_SCFG3));
++
++#ifdef CFG_DEBUG
++	/* Enable Debug messages on the DBGU */
++	dbg_init(BAUDRATE(MASTER_CLOCK, 115200));
++
++	dbg_print("Start AT91Bootstrap...\n\r");
++#endif /* CFG_DEBUG */
++
++#ifdef CFG_SDRAM
++	/* Initialize the matrix */
++	writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) | AT91C_EBI_CS1A_SDRAMC, AT91C_BASE_CCFG + CCFG_EBICSA);
++
++	/* Configure SDRAM Controller */
++	sdram_init(	AT91C_SDRAMC_NC_9  |
++				AT91C_SDRAMC_NR_13 |
++				AT91C_SDRAMC_CAS_2 |
++				AT91C_SDRAMC_NB_4_BANKS |
++				AT91C_SDRAMC_DBW_32_BITS |
++				AT91C_SDRAMC_TWR_2 |
++				AT91C_SDRAMC_TRC_7 |
++				AT91C_SDRAMC_TRP_2 |
++				AT91C_SDRAMC_TRCD_2 |
++				AT91C_SDRAMC_TRAS_5 |
++				AT91C_SDRAMC_TXSR_8,		/* Control Register */
++				(MASTER_CLOCK * 7)/1000000,	/* Refresh Timer Register */
++				AT91C_SDRAMC_MD_SDRAM);		/* SDRAM (no low power)   */ 
++
++
++#endif /* CFG_SDRAM */
++}
++#endif /* CFG_HW_INIT */
++
++#ifdef CFG_SDRAM
++/*------------------------------------------------------------------------------*/
++/* \fn    sdramc_hw_init							*/
++/* \brief This function performs SDRAMC HW initialization			*/
++/*------------------------------------------------------------------------------*/
++void sdramc_hw_init(void)
++{
++	/* Configure PIOs */
++/*	const struct pio_desc sdramc_pio[] = {
++		{"D16", AT91C_PIN_PC(16), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D17", AT91C_PIN_PC(17), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D18", AT91C_PIN_PC(18), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D19", AT91C_PIN_PC(19), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D20", AT91C_PIN_PC(20), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D21", AT91C_PIN_PC(21), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D22", AT91C_PIN_PC(22), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D23", AT91C_PIN_PC(23), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D24", AT91C_PIN_PC(24), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D25", AT91C_PIN_PC(25), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D26", AT91C_PIN_PC(26), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D27", AT91C_PIN_PC(27), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D28", AT91C_PIN_PC(28), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D29", AT91C_PIN_PC(29), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D30", AT91C_PIN_PC(30), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D31", AT91C_PIN_PC(31), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++*/
++	/* Configure the SDRAMC PIO controller to output PCK0 */
++/*	pio_setup(sdramc_pio); */
++
++	writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_ASR(0));
++	writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_PDR(0));
++
++}
++#endif /* CFG_SDRAM */
++
++#ifdef CFG_DATAFLASH
++
++/*------------------------------------------------------------------------------*/
++/* \fn    df_recovery								*/
++/* \brief This function erases DataFlash Page 0 if USR PB is pressed 		*/
++/*        during boot sequence							*/
++/*------------------------------------------------------------------------------*/
++void df_recovery(AT91PS_DF pDf)
++{
++#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS0_DATAFLASH)
++	/* Configure PIOs */
++	const struct pio_desc usrpb_pio[] = {
++		{"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the PIO controller */
++	writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
++	pio_setup(usrpb_pio);
++	
++	/* If USR PB is pressed during Boot sequence */
++	/* Erase DataFlash Page 0*/
++	if ( !pio_get_value(AT91C_PIN_PB(10)) )
++		df_page_erase(pDf, 0);
++#endif
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    df_hw_init								*/
++/* \brief This function performs DataFlash HW initialization			*/
++/*------------------------------------------------------------------------------*/
++void df_hw_init(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc df_pio[] = {
++		{"MISO",  AT91C_PIN_PA(0), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"MOSI",  AT91C_PIN_PA(1), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"SPCK",  AT91C_PIN_PA(2), 0, PIO_DEFAULT, PIO_PERIPH_A},
++#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS0_DATAFLASH)
++		{"NPCS0", AT91C_PIN_PA(3), 0, PIO_DEFAULT, PIO_PERIPH_A},
++#endif
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the PIO controller */
++	pio_setup(df_pio);
++}
++#endif /* CFG_DATAFLASH */
++
++
++
++#ifdef CFG_NANDFLASH
++/*------------------------------------------------------------------------------*/
++/* \fn    nand_recovery						*/
++/* \brief This function erases NandFlash Block 0 if USR PB is pressed 		*/
++/*        during boot sequence							*/
++/*------------------------------------------------------------------------------*/
++static void nand_recovery(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc usrpb_pio[] = {
++		{"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the PIO controller */
++	writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
++	pio_setup(usrpb_pio);
++	
++	/* If USR PB is pressed during Boot sequence */
++	/* Erase NandFlash block 0*/
++	if (!pio_get_value(AT91C_PIN_PB(10)) )
++		AT91F_NandEraseBlock0();
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_hw_init							*/
++/* \brief NandFlash HW init							*/
++/*------------------------------------------------------------------------------*/
++void nandflash_hw_init(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc nand_pio[] = {
++		{"RDY_BSY", AT91C_PIN_PC(13), 0, PIO_PULLUP, PIO_INPUT},
++		{"NANDCS",  AT91C_PIN_PC(14), 0, PIO_PULLUP, PIO_OUTPUT},
++		{(char *) 0, 0, 0,  PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Setup Smart Media, first enable the address range of CS3 in HMATRIX user interface */
++	writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) | AT91C_EBI_CS3A_SM, AT91C_BASE_CCFG + CCFG_EBICSA);
++		    
++	/* Configure SMC CS3 */
++ 	writel((AT91C_SM_NWE_SETUP | AT91C_SM_NCS_WR_SETUP | AT91C_SM_NRD_SETUP | AT91C_SM_NCS_RD_SETUP), AT91C_BASE_SMC + SMC_SETUP3);
++  	writel((AT91C_SM_NWE_PULSE | AT91C_SM_NCS_WR_PULSE | AT91C_SM_NRD_PULSE | AT91C_SM_NCS_RD_PULSE), AT91C_BASE_SMC + SMC_PULSE3);
++	writel((AT91C_SM_NWE_CYCLE | AT91C_SM_NRD_CYCLE)						, AT91C_BASE_SMC + SMC_CYCLE3);
++	writel((AT91C_SMC_READMODE | AT91C_SMC_WRITEMODE | AT91C_SMC_NWAITM_NWAIT_DISABLE | 
++  		AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS | AT91C_SM_TDF)						, AT91C_BASE_SMC + SMC_CTRL3);
++
++	/* Configure the PIO controller */
++	writel((1 << AT91C_ID_PIOC), PMC_PCER + AT91C_BASE_PMC);
++	pio_setup(nand_pio);
++	
++	nand_recovery();
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_cfg_16bits_dbw_init						*/
++/* \brief Configure SMC in 16 bits mode						*/
++/*------------------------------------------------------------------------------*/
++void nandflash_cfg_16bits_dbw_init(void)
++{
++	writel(readl(AT91C_BASE_SMC + SMC_CTRL3) | AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS, AT91C_BASE_SMC + SMC_CTRL3);
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_cfg_8bits_dbw_init						*/
++/* \brief Configure SMC in 8 bits mode						*/
++/*------------------------------------------------------------------------------*/
++void nandflash_cfg_8bits_dbw_init(void)
++{
++	writel((readl(AT91C_BASE_SMC + SMC_CTRL3) & ~(AT91C_SMC_DBW)) | AT91C_SMC_DBW_WIDTH_EIGTH_BITS, AT91C_BASE_SMC + SMC_CTRL3);
++}
++
++
++#endif /* #ifdef CFG_NANDFLASH */
+diff --git a/crt0_gnu.S b/crt0_gnu.S
+index 042b617..002feef 100644
+--- a/crt0_gnu.S
++++ b/crt0_gnu.S
+@@ -106,6 +106,13 @@ _relocate_to_sram:
+ #endif /* CFG_NORFLASH */
+ 
+ _setup_clocks:
++/* Test if main osc is bypassed */
++	ldr 	r0,=AT91C_PMC_MOR
++	ldr 	r1, [r0]
++	ldr 	r2,=AT91C_CKGR_OSCBYPASS 
++	ands 	r1, r1, r2
++	bne	_init_data	/* branch if OSCBYPASS=1 */
++
+ /* Test if main oscillator is enabled */
+ 	ldr 	r0,=AT91C_PMC_SR
+ 	ldr 	r1, [r0]
+diff --git a/include/part.h b/include/part.h
+index ba5985a..212789f 100644
+--- a/include/part.h
++++ b/include/part.h
+@@ -35,7 +35,11 @@
+ 
+ #ifdef AT91SAM9260
+ #include "AT91SAM9260_inc.h"
+-#include "at91sam9260ek.h"
++	#ifdef at91sam9260ek
++	#include "at91sam9260ek.h"
++	#elif usb_a9260
++	#include "usb-a9260.h"
++	#endif
+ #endif
+ 
+ #ifdef AT91SAM9XE
+-- 
+1.7.9.5
+

board/calao/usb-a9260/linux-3.7.4.config

@@ -0,0 +1,97 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_AT91=y
+CONFIG_ARCH_AT91SAM9260=y
+CONFIG_MACH_USB_A9260=y
+CONFIG_AT91_SLOW_CLOCK=y
+# CONFIG_ARM_THUMB is not set
+CONFIG_AEABI=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
+CONFIG_FPE_NWFPE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_SPI=y
+CONFIG_SPI_ATMEL=y
+# CONFIG_HWMON is not set
+# CONFIG_USB_HID is not set
+CONFIG_USB=y
+CONFIG_USB_MON=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_EXT2_FS=y
+CONFIG_FUSE_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_UBIFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_LL=y

board/calao/usb-a9263/at91bootstrap-1.16-usb-a9263.patch

@@ -0,0 +1,851 @@
+From 74796655212d321f50ab89e8c5570245901f4cba Mon Sep 17 00:00:00 2001
+From: Gregory Hermant <gregory.hermant@calao-systems.com>
+Date: Thu, 5 Jul 2012 18:44:07 +0200
+Subject: [PATCH] Add support for the Calao-systems USB-A9263
+
+
+Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
+---
+ board/usb_a9263/dataflash/Makefile    |  115 +++++++++++++
+ board/usb_a9263/dataflash/usb-a9263.h |   97 +++++++++++
+ board/usb_a9263/nandflash/Makefile    |  117 ++++++++++++++
+ board/usb_a9263/nandflash/usb-a9263.h |  116 +++++++++++++
+ board/usb_a9263/usb_a9263.c           |  285 +++++++++++++++++++++++++++++++++
+ crt0_gnu.S                            |    7 +
+ driver/dataflash.c                    |    6 +-
+ include/part.h                        |    6 +-
+ 8 files changed, 745 insertions(+), 4 deletions(-)
+ create mode 100644 board/usb_a9263/dataflash/Makefile
+ create mode 100644 board/usb_a9263/dataflash/usb-a9263.h
+ create mode 100644 board/usb_a9263/nandflash/Makefile
+ create mode 100644 board/usb_a9263/nandflash/usb-a9263.h
+ create mode 100644 board/usb_a9263/usb_a9263.c
+
+diff --git a/board/usb_a9263/dataflash/Makefile b/board/usb_a9263/dataflash/Makefile
+new file mode 100644
+index 0000000..332685e
+--- /dev/null
++++ b/board/usb_a9263/dataflash/Makefile
+@@ -0,0 +1,115 @@
++# TODO: set this appropriately for your local toolchain
++#SHELL=C:\CYGWIN_REP\dwn_071004\bin\BASH.exe
++CROSS_COMPILE=arm-elf-
++#CROSS_COMPILE = arm-softfloat-linux-gnu-
++
++TOOLCHAIN=gcc
++
++BOOTSTRAP_PATH=../../..
++
++# DataFlashBoot Configuration for USB-A9263
++
++# Target name (case sensitive!!!)
++TARGET=AT91SAM9263
++# Board name (case sensitive!!!)
++BOARD=usb_a9263
++# Link Address and Top_of_Memory
++LINK_ADDR=0x300000
++TOP_OF_MEMORY=0x314000
++# Name of current directory
++PROJECT=dataflash
++
++ifndef BOOT_NAME
++BOOT_NAME=$(PROJECT)_$(BOARD)
++endif
++
++INCL=./$(BOOTSTRAP_PATH)/board/$(BOARD)/$(PROJECT)
++
++ifeq ($(TOOLCHAIN), gcc)
++
++AS=$(CROSS_COMPILE)gcc
++CC=$(CROSS_COMPILE)gcc
++LD=$(CROSS_COMPILE)gcc
++NM= $(CROSS_COMPILE)nm
++SIZE=$(CROSS_COMPILE)size
++OBJCOPY=$(CROSS_COMPILE)objcopy
++OBJDUMP=$(CROSS_COMPILE)objdump
++CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL)
++ASFLAGS=-g -mcpu=arm9 -c -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
++
++# Linker flags.
++#  -Wl,...:     tell GCC to pass this to linker.
++#    -Map:      create map file
++#    --cref:    add cross reference to map file
++LDFLAGS+=-nostartfiles -nostdlib  -Wl,-Map=$(BOOT_NAME).map,--cref
++LDFLAGS+=-T $(BOOTSTRAP_PATH)/elf32-littlearm.lds -Ttext $(LINK_ADDR)
++OBJS=crt0_gnu.o
++
++endif
++
++OBJS+=\
++	$(BOARD).o \
++	main.o \
++	gpio.o \
++	pmc.o \
++	debug.o \
++	sdramc.o \
++	dataflash.o \
++	_udivsi3.o \
++	_umodsi3.o \
++	div0.o \
++	udiv.o \
++	string.o
++
++rebuild: clean all
++
++all: 	$(BOOT_NAME)
++
++ifeq ($(TOOLCHAIN), gcc)
++$(BOOT_NAME): $(OBJS)
++	$(LD) $(LDFLAGS) -n -o $(BOOT_NAME).elf $(OBJS)
++	$(OBJCOPY) --strip-debug --strip-unneeded $(BOOT_NAME).elf -O binary $(BOOT_NAME).bin
++endif
++	
++	
++$(BOARD).o: $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c -o $(BOARD).o
++
++main.o: $(BOOTSTRAP_PATH)/main.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/main.c -o main.o
++
++gpio.o: $(BOOTSTRAP_PATH)/driver/gpio.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/gpio.c -o gpio.o
++
++pmc.o:  $(BOOTSTRAP_PATH)/driver/pmc.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/pmc.c -o pmc.o
++
++debug.o: $(BOOTSTRAP_PATH)/driver/debug.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/debug.c -o debug.o
++
++sdramc.o:  $(BOOTSTRAP_PATH)/driver/sdramc.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/sdramc.c -o sdramc.o
++
++dataflash.o:  $(BOOTSTRAP_PATH)/driver/dataflash.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/dataflash.c -o dataflash.o
++
++crt0_gnu.o:  $(BOOTSTRAP_PATH)/crt0_gnu.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/crt0_gnu.S -o crt0_gnu.o
++
++div0.o:  $(BOOTSTRAP_PATH)/lib/div0.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/div0.c -o div0.o
++
++string.o:  $(BOOTSTRAP_PATH)/lib/string.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/string.c -o string.o
++
++udiv.o:  $(BOOTSTRAP_PATH)/lib/udiv.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/udiv.c -o udiv.o
++
++_udivsi3.o:  $(BOOTSTRAP_PATH)/lib/_udivsi3.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_udivsi3.S -o _udivsi3.o
++
++_umodsi3.o:  $(BOOTSTRAP_PATH)/lib/_umodsi3.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_umodsi3.S -o _umodsi3.o
++
++clean:
++	rm -f *.o *.bin *.elf *.map
+diff --git a/board/usb_a9263/dataflash/usb-a9263.h b/board/usb_a9263/dataflash/usb-a9263.h
+new file mode 100644
+index 0000000..40a3af8
+--- /dev/null
++++ b/board/usb_a9263/dataflash/usb-a9263.h
+@@ -0,0 +1,97 @@
++/* ----------------------------------------------------------------------------
++ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
++ * ----------------------------------------------------------------------------
++ * Copyright (c) 2006, Atmel Corporation
++
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ *
++ * - Redistributions of source code must retain the above copyright notice,
++ * this list of conditions and the disclaimer below.
++ *
++ * Atmel's name may not be used to endorse or promote products derived from
++ * this software without specific prior written permission.
++ *
++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ----------------------------------------------------------------------------
++ * File Name           : usb-a9263.h
++ * Object              :
++ * Creation            : GH Jun 28th 2012
++ *-----------------------------------------------------------------------------
++ */
++#ifndef _USB_A9263_H
++#define _USB_A9263_H
++
++/* ******************************************************************* */
++/* PMC Settings                                                        */
++/*                                                                     */
++/* The main oscillator is enabled as soon as possible in the c_startup */
++/* and MCK is switched on the main oscillator.                         */
++/* PLL initialization is done later in the hw_init() function          */
++/* ******************************************************************* */
++#define MASTER_CLOCK		(180000000/2)
++#define PLL_LOCK_TIMEOUT	1000000
++
++#define PLLA_SETTINGS	0x20593F06
++#define PLLB_SETTINGS	0x10483F0E
++
++/* Switch MCK on PLLA output PCK = PLLA = 2 * MCK */
++#define MCKR_SETTINGS		(AT91C_PMC_PRES_CLK | AT91C_PMC_MDIV_2)
++#define MCKR_CSS_SETTINGS	(AT91C_PMC_CSS_PLLA_CLK | MCKR_SETTINGS)
++
++/* ******************************************************************* */
++/* DataFlash Settings                                                  */
++/*                                                                     */
++/* ******************************************************************* */
++#define AT91C_BASE_SPI	AT91C_BASE_SPI0
++#define AT91C_ID_SPI	AT91C_ID_SPI0
++
++/* SPI CLOCK */
++#define AT91C_SPI_CLK 		 8000000
++/* AC characteristics */
++/* DLYBS = tCSS= 250ns min and DLYBCT = tCSH = 250ns */
++#define DATAFLASH_TCSS		(0x1a << 16)	/* 250ns min (tCSS) <=> 12/48000000 = 250ns */
++#define DATAFLASH_TCHS		(0x1 << 24)	/* 250ns min (tCSH) <=> (64*1+SCBR)/(2*48000000) */
++
++#define DF_CS_SETTINGS 		(AT91C_SPI_NCPHA | (AT91C_SPI_DLYBS & DATAFLASH_TCSS) | (AT91C_SPI_DLYBCT & DATAFLASH_TCHS) | ((MASTER_CLOCK / AT91C_SPI_CLK) << 8))
++
++/* ******************************************************************* */
++/* SDRAMC Settings                                                     */
++/*                                                                     */
++/* ******************************************************************* */
++#define AT91C_BASE_SDRAMC 	AT91C_BASE_SDRAMC0
++#define AT91C_EBI_SDRAM		AT91C_EBI0_SDRAM
++
++/* ******************************************************************* */
++/* BootStrap Settings                                                  */
++/*                                                                     */
++/* ******************************************************************* */
++#define AT91C_SPI_PCS_DATAFLASH		AT91C_SPI_PCS0_DATAFLASH	/* Boot on SPI NCS0 */
++
++#define IMG_ADDRESS 			0x4000			/* Image Address in DataFlash */
++#define	IMG_SIZE			0x40000			/* Image Size in DataFlash    */
++
++#define MACH_TYPE       		0x6AE       		/* USB-A9263 */
++#define JUMP_ADDR			0x23F00000		/* Final Jump Address 	      */
++
++/* ******************************************************************* */
++/* Application Settings                                                */
++/* ******************************************************************* */
++#define CFG_HW_INIT
++#define CFG_SDRAM
++#undef	CFG_DEBUG
++
++#define CFG_DATAFLASH
++
++#endif	/* _USB_A9263_H */
+diff --git a/board/usb_a9263/nandflash/Makefile b/board/usb_a9263/nandflash/Makefile
+new file mode 100644
+index 0000000..c453098
+--- /dev/null
++++ b/board/usb_a9263/nandflash/Makefile
+@@ -0,0 +1,117 @@
++# TODO: set this appropriately for your local toolchain
++#SHELL=C:\CYGWIN_REP\dwn_071004\bin\BASH.exe
++CROSS_COMPILE=arm-elf-
++
++TOOLCHAIN=gcc
++
++BOOTSTRAP_PATH=../../..
++
++# NandFlashBoot Configuration for USB-A9263
++
++# Target name (case sensitive!!!)
++TARGET=AT91SAM9263
++# Board name (case sensitive!!!)
++BOARD=usb_a9263
++# Link Address and Top_of_Memory
++LINK_ADDR=0x300000
++TOP_OF_MEMORY=0x314000
++# Name of current directory
++PROJECT=nandflash
++
++ifndef BOOT_NAME
++BOOT_NAME=$(PROJECT)_$(BOARD)
++endif
++
++INCL=./$(BOOTSTRAP_PATH)/board/$(BOARD)/$(PROJECT)
++
++ifeq ($(TOOLCHAIN), gcc)
++
++AS=$(CROSS_COMPILE)gcc
++CC=$(CROSS_COMPILE)gcc
++LD=$(CROSS_COMPILE)gcc
++NM= $(CROSS_COMPILE)nm
++SIZE=$(CROSS_COMPILE)size
++OBJCOPY=$(CROSS_COMPILE)objcopy
++OBJDUMP=$(CROSS_COMPILE)objdump
++CCFLAGS=-g -mcpu=arm9 -O0 -Wall -D$(TARGET) -D$(BOARD) -I$(INCL)
++ASFLAGS=-g -mcpu=arm9 -c -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
++
++# Linker flags.
++#  -Wl,...:     tell GCC to pass this to linker.
++#    -Map:      create map file
++#    --cref:    add cross reference to map file
++LDFLAGS+=-nostartfiles -nostdlib  -Wl,-Map=$(BOOT_NAME).map,--cref
++LDFLAGS+=-T $(BOOTSTRAP_PATH)/elf32-littlearm.lds -Ttext $(LINK_ADDR)
++OBJS=crt0_gnu.o
++
++endif
++
++OBJS+=\
++	$(BOARD).o \
++	main.o \
++	gpio.o \
++	pmc.o \
++	debug.o \
++	sdramc.o \
++	nandflash.o \
++	_udivsi3.o \
++	_umodsi3.o \
++	div0.o \
++	udiv.o \
++	string.o
++
++rebuild: clean all
++
++all: 	$(BOOT_NAME)
++
++ifeq ($(TOOLCHAIN), gcc)
++$(BOOT_NAME): $(OBJS)
++	$(LD) $(LDFLAGS) -n -o $(BOOT_NAME).elf $(OBJS)
++	$(OBJCOPY) --strip-debug --strip-unneeded $(BOOT_NAME).elf -O binary $(BOOT_NAME).bin
++endif
++	
++	
++$(BOARD).o: $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c -o $(BOARD).o
++
++main.o: $(BOOTSTRAP_PATH)/main.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/main.c -o main.o
++
++gpio.o: $(BOOTSTRAP_PATH)/driver/gpio.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/gpio.c -o gpio.o
++
++pmc.o:  $(BOOTSTRAP_PATH)/driver/pmc.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/pmc.c -o pmc.o
++
++debug.o: $(BOOTSTRAP_PATH)/driver/debug.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/debug.c -o debug.o
++
++sdramc.o:  $(BOOTSTRAP_PATH)/driver/sdramc.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/sdramc.c -o sdramc.o
++
++dataflash.o:  $(BOOTSTRAP_PATH)/driver/dataflash.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/dataflash.c -o dataflash.o
++
++nandflash.o:  $(BOOTSTRAP_PATH)/driver/nandflash.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/nandflash.c -o nandflash.o
++
++crt0_gnu.o:  $(BOOTSTRAP_PATH)/crt0_gnu.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/crt0_gnu.S -o crt0_gnu.o
++
++div0.o:  $(BOOTSTRAP_PATH)/lib/div0.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/div0.c -o div0.o
++
++string.o:  $(BOOTSTRAP_PATH)/lib/string.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/string.c -o string.o
++
++udiv.o:  $(BOOTSTRAP_PATH)/lib/udiv.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/udiv.c -o udiv.o
++
++_udivsi3.o:  $(BOOTSTRAP_PATH)/lib/_udivsi3.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_udivsi3.S -o _udivsi3.o
++
++_umodsi3.o:  $(BOOTSTRAP_PATH)/lib/_umodsi3.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_umodsi3.S -o _umodsi3.o
++
++clean:
++	rm -f *.o *.bin *.elf *.map
+diff --git a/board/usb_a9263/nandflash/usb-a9263.h b/board/usb_a9263/nandflash/usb-a9263.h
+new file mode 100644
+index 0000000..24e2cf1
+--- /dev/null
++++ b/board/usb_a9263/nandflash/usb-a9263.h
+@@ -0,0 +1,116 @@
++/* ----------------------------------------------------------------------------
++ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
++ * ----------------------------------------------------------------------------
++ * Copyright (c) 2006, Atmel Corporation
++
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ *
++ * - Redistributions of source code must retain the above copyright notice,
++ * this list of conditions and the disclaimer below.
++ *
++ * Atmel's name may not be used to endorse or promote products derived from
++ * this software without specific prior written permission.
++ *
++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ----------------------------------------------------------------------------
++ * File Name           : usb-a9263.h
++ * Object              :
++ * Creation            : GH Jun 28th 2012
++ *-----------------------------------------------------------------------------
++ */
++#ifndef _USB_A9263_H
++#define _USB_A9263_H
++
++/* ******************************************************************* */
++/* PMC Settings                                                        */
++/*                                                                     */
++/* The main oscillator is enabled as soon as possible in the c_startup */
++/* and MCK is switched on the main oscillator.                         */
++/* PLL initialization is done later in the hw_init() function          */
++/* ******************************************************************* */
++#define MASTER_CLOCK		(180000000/2)
++#define PLL_LOCK_TIMEOUT	1000000
++
++#define PLLA_SETTINGS	0x20593F06
++#define PLLB_SETTINGS	0x10483F0E
++
++/* Switch MCK on PLLA output PCK = PLLA = 2 * MCK */
++#define MCKR_SETTINGS		(AT91C_PMC_PRES_CLK | AT91C_PMC_MDIV_2)
++#define MCKR_CSS_SETTINGS	(AT91C_PMC_CSS_PLLA_CLK | MCKR_SETTINGS)
++
++/* ******************************************************************* */
++/* NandFlash Settings                                                  */
++/*                                                                     */
++/* ******************************************************************* */
++#define AT91C_SMARTMEDIA_BASE	0x40000000
++
++#define AT91_SMART_MEDIA_ALE    (1 << 21)	/* our ALE is AD21 */
++#define AT91_SMART_MEDIA_CLE    (1 << 22)	/* our CLE is AD22 */
++
++#define NAND_DISABLE_CE() do { *(volatile unsigned int *)AT91C_PIOD_SODR = AT91C_PIO_PD15;} while(0)
++#define NAND_ENABLE_CE()  do { *(volatile unsigned int *)AT91C_PIOD_CODR = AT91C_PIO_PD15;} while(0)
++#define NAND_WAIT_READY() while (!(*(volatile unsigned int *)AT91C_PIOA_PDSR & AT91C_PIO_PA22))
++
++/* ******************************************************************* */
++/* SDRAMC Settings                                                     */
++/*                                                                     */
++/* ******************************************************************* */
++#define AT91C_BASE_SDRAMC 	AT91C_BASE_SDRAMC0
++#define AT91C_EBI_SDRAM		AT91C_EBI0_SDRAM
++
++/* ******************************************************************** */
++/* SMC Chip Select 3 Timings for NandFlash for MASTER_CLOCK = 90000000. */
++/* Please refer to SMC section in AT91SAM9x datasheet to learn how 	*/
++/* to generate these values. 						*/
++/* ******************************************************************** */
++#define AT91C_SM_NWE_SETUP	(1 << 0)
++#define AT91C_SM_NCS_WR_SETUP	(0 << 8)
++#define AT91C_SM_NRD_SETUP	(1 << 16)
++#define AT91C_SM_NCS_RD_SETUP	(0 << 24)
++  
++#define AT91C_SM_NWE_PULSE 	(3 << 0)
++#define AT91C_SM_NCS_WR_PULSE	(3 << 8)
++#define AT91C_SM_NRD_PULSE	(3 << 16)
++#define AT91C_SM_NCS_RD_PULSE	(3 << 24)
++  
++#define AT91C_SM_NWE_CYCLE 	(5 << 0)
++#define AT91C_SM_NRD_CYCLE	(5 << 16)
++
++#define AT91C_SM_TDF	        (2 << 16)
++
++/* ******************************************************************* */
++/* BootStrap Settings                                                  */
++/*                                                                     */
++/* ******************************************************************* */
++#define IMG_ADDRESS 	0x20000		/* Image Address in NandFlash */
++#define	IMG_SIZE	0x40000		/* Image Size in NandFlash    */
++
++#define MACH_TYPE       0x6AE  		/* USB-A9263 */
++#define JUMP_ADDR	0x23F00000	/* Final Jump Address 	      */
++
++/* ******************************************************************* */
++/* Application Settings                                                */
++/* ******************************************************************* */
++#undef CFG_DEBUG
++#undef CFG_DATAFLASH
++
++#define CFG_NANDFLASH
++#undef	NANDFLASH_SMALL_BLOCKS	/* NANDFLASH_LARGE_BLOCKS used instead */
++
++#define CFG_HW_INIT
++#define CFG_SDRAM
++
++
++#endif	/* _USB_A9263_H */
+diff --git a/board/usb_a9263/usb_a9263.c b/board/usb_a9263/usb_a9263.c
+new file mode 100644
+index 0000000..5630f99
+--- /dev/null
++++ b/board/usb_a9263/usb_a9263.c
+@@ -0,0 +1,285 @@
++/* ----------------------------------------------------------------------------
++ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
++ * ----------------------------------------------------------------------------
++ * Copyright (c) 2006, Atmel Corporation
++
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ *
++ * - Redistributions of source code must retain the above copyright notice,
++ * this list of conditions and the disclaiimer below.
++ *
++ * Atmel's name may not be used to endorse or promote products derived from
++ * this software without specific prior written permission.
++ *
++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ----------------------------------------------------------------------------
++ * File Name           : usb_a9263.c
++ * Object              :
++ * Creation            : GH Jun 28th 2012
++ *-----------------------------------------------------------------------------
++ */
++#include "../../include/part.h"
++#include "../../include/gpio.h"
++#include "../../include/pmc.h"
++#include "../../include/debug.h"
++#include "../../include/sdramc.h"
++#include "../../include/main.h"
++#ifdef CFG_NANDFLASH
++#include "../../include/nandflash.h"
++#endif
++#ifdef CFG_DATAFLASH
++#include "../../include/dataflash.h"
++#endif
++
++static inline unsigned int get_cp15(void)
++{
++	unsigned int value;
++	__asm__("mrc p15, 0, %0, c1, c0, 0" : "=r" (value));
++	return value;
++}
++
++static inline void set_cp15(unsigned int value)
++{
++	__asm__("mcr p15, 0, %0, c1, c0, 0" : : "r" (value));
++}
++
++
++#ifdef CFG_HW_INIT
++/*---------------------------------------------------------------------------- */
++/* \fn    hw_init							       */
++/* \brief This function performs very low level HW initialization	       */
++/* This function is invoked as soon as possible during the c_startup	       */
++/* The bss segment must be initialized					       */
++/*---------------------------------------------------------------------------- */
++void hw_init(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc hw_pio[] = {
++#ifdef CFG_DEBUG
++		{"RXD", AT91C_PIN_PC(30), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"TXD", AT91C_PIN_PC(31), 0, PIO_DEFAULT, PIO_PERIPH_A},
++#endif
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Disable watchdog */
++	writel(AT91C_WDTC_WDDIS, AT91C_BASE_WDTC + WDTC_WDMR);
++
++	/* At this stage the main oscillator is supposed to be enabled
++	 * PCK = MCK = MOSC */
++
++	/* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */
++	pmc_cfg_plla(PLLA_SETTINGS, PLL_LOCK_TIMEOUT);
++
++	/* PCK = PLLA = 2 * MCK */
++	pmc_cfg_mck(MCKR_SETTINGS, PLL_LOCK_TIMEOUT);
++	/* Switch MCK on PLLA output */
++	pmc_cfg_mck(MCKR_CSS_SETTINGS, PLL_LOCK_TIMEOUT);
++
++
++	/* Configure PLLB */
++	pmc_cfg_pllb(PLLB_SETTINGS, PLL_LOCK_TIMEOUT);
++
++	/* Configure the PIO controller to output PCK0 */
++	pio_setup(hw_pio);
++
++	/* Configure the EBI0 Slave Slot Cycle to 64 */
++	writel( (readl((AT91C_BASE_MATRIX + MATRIX_SCFG4)) & ~0xFF) | 0x40, (AT91C_BASE_MATRIX + MATRIX_SCFG4));
++
++#ifdef CFG_DEBUG
++	/* Enable Debug messages on the DBGU */
++	dbg_init(BAUDRATE(MASTER_CLOCK, 115200));
++	dbg_print("Start AT91Bootstrap...\n\r");
++#endif /* CFG_DEBUG */
++
++#ifdef CFG_SDRAM
++	/* Initialize the matrix */
++	/* VDDIOMSEL = 1 -> Memories are 3.3V powered */
++	writel(readl(AT91C_BASE_CCFG + CCFG_EBI0CSA) | (1 << 16) | AT91C_EBI_CS1A_SDRAMC, AT91C_BASE_CCFG + CCFG_EBI0CSA);
++
++	/* Configure SDRAM Controller */
++	sdram_init(	AT91C_SDRAMC_NC_9  |
++				AT91C_SDRAMC_NR_13 |
++				AT91C_SDRAMC_CAS_2 |
++				AT91C_SDRAMC_NB_4_BANKS |
++				AT91C_SDRAMC_DBW_32_BITS |
++				AT91C_SDRAMC_TWR_2 |
++				AT91C_SDRAMC_TRC_7 |
++				AT91C_SDRAMC_TRP_2 |
++				AT91C_SDRAMC_TRCD_2 |
++				AT91C_SDRAMC_TRAS_5 |
++				AT91C_SDRAMC_TXSR_8,		/* Control Register       */
++				(MASTER_CLOCK * 7)/1000000,	/* Refresh Timer Register */
++				AT91C_SDRAMC_MD_SDRAM);		/* SDRAM (no low power)   */ 
++#endif	/* CFG_SDRAM */
++}
++#endif /* CFG_HW_INIT */
++
++
++#ifdef CFG_SDRAM
++//*----------------------------------------------------------------------------
++//* \fn    sdramc_hw_init
++//* \brief This function performs SDRAMC HW initialization
++//*----------------------------------------------------------------------------*/
++void sdramc_hw_init(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc sdramc_pio[] = {
++		{"D16", AT91C_PIN_PD(16), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D17", AT91C_PIN_PD(17), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D18", AT91C_PIN_PD(18), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D19", AT91C_PIN_PD(19), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D20", AT91C_PIN_PD(20), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D21", AT91C_PIN_PD(21), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D22", AT91C_PIN_PD(22), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D23", AT91C_PIN_PD(23), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D24", AT91C_PIN_PD(24), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D25", AT91C_PIN_PD(25), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D26", AT91C_PIN_PD(26), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D27", AT91C_PIN_PD(27), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D28", AT91C_PIN_PD(28), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D29", AT91C_PIN_PD(29), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D30", AT91C_PIN_PD(30), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D31", AT91C_PIN_PD(31), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the SDRAMC PIO controller */
++	pio_setup(sdramc_pio);
++}
++#endif
++
++#ifdef CFG_DATAFLASH
++/*------------------------------------------------------------------------------*/
++/* \fn    df_recovery								*/
++/* \brief This function erases DataFlash Page 0 if USER PB is pressed 		*/
++/*        during boot sequence							*/
++/*------------------------------------------------------------------------------*/
++void df_recovery(AT91PS_DF pDf)
++{
++#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS0_DATAFLASH)
++	/* Configure PIOs */
++	const struct pio_desc usrpb_pio[] = {
++		{"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the PIO controller */
++	writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
++	pio_setup(usrpb_pio);
++	
++	/* If USER PB is pressed during Boot sequence */
++	/* Erase NandFlash block 0*/
++	if ( !pio_get_value(AT91C_PIN_PB(10)) )
++		df_page_erase(pDf, 0);
++#endif
++}
++/*------------------------------------------------------------------------------*/
++/* \fn    df_hw_init								*/
++/* \brief This function performs DataFlash HW initialization			*/
++/*------------------------------------------------------------------------------*/
++void df_hw_init(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc df_pio[] = {
++		{"MISO",  AT91C_PIN_PA(0), 0, PIO_DEFAULT, PIO_PERIPH_B},
++		{"MOSI",  AT91C_PIN_PA(1), 0, PIO_DEFAULT, PIO_PERIPH_B},
++		{"SPCK",  AT91C_PIN_PA(2), 0, PIO_DEFAULT, PIO_PERIPH_B},
++		{"NPCS0", AT91C_PIN_PA(5), 0, PIO_DEFAULT, PIO_PERIPH_B},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the PIO controller */
++	pio_setup(df_pio);
++}
++#endif /* CFG_DATAFLASH */
++
++
++#ifdef CFG_NANDFLASH
++/*------------------------------------------------------------------------------*/
++/* \fn    nand_recovery								*/
++/* \brief This function erases NandFlash Block 0 if USER PB is pressed 		*/
++/*        during boot sequence							*/
++/*------------------------------------------------------------------------------*/
++static void nand_recovery(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc usrpb_pio[] = {
++		{"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the PIO controller */
++	writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
++	pio_setup(usrpb_pio);
++	
++	/* If USER PB is pressed during Boot sequence */
++	/* Erase NandFlash block 0*/
++	if (!pio_get_value(AT91C_PIN_PB(10)) )
++		AT91F_NandEraseBlock0();
++}
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_hw_init							*/
++/* \brief NandFlash HW init							*/
++/*------------------------------------------------------------------------------*/
++void nandflash_hw_init(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc nand_pio[] = {
++		{"RDY_BSY", AT91C_PIN_PA(22), 0, PIO_PULLUP, PIO_INPUT},
++		{"NANDCS",  AT91C_PIN_PD(15), 0, PIO_PULLUP, PIO_OUTPUT},
++		{(char *) 0, 0, 0,  PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Setup Smart Media, first enable the address range of CS3 in HMATRIX user interface */
++	writel(readl(AT91C_BASE_CCFG + CCFG_EBI0CSA) | AT91C_EBI_CS3A_SM, AT91C_BASE_CCFG + CCFG_EBI0CSA);
++		    
++	/* Configure SMC CS3 */
++ 	writel((AT91C_SM_NWE_SETUP | AT91C_SM_NCS_WR_SETUP | AT91C_SM_NRD_SETUP | AT91C_SM_NCS_RD_SETUP), AT91C_BASE_SMC0 + SMC_SETUP3);
++  	writel((AT91C_SM_NWE_PULSE | AT91C_SM_NCS_WR_PULSE | AT91C_SM_NRD_PULSE | AT91C_SM_NCS_RD_PULSE), AT91C_BASE_SMC0 + SMC_PULSE3);
++	writel((AT91C_SM_NWE_CYCLE | AT91C_SM_NRD_CYCLE)						, AT91C_BASE_SMC0 + SMC_CYCLE3);
++	writel((AT91C_SMC_READMODE | AT91C_SMC_WRITEMODE | AT91C_SMC_NWAITM_NWAIT_DISABLE | 
++  		AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS | AT91C_SM_TDF)						, AT91C_BASE_SMC0 + SMC_CTRL3);
++
++	/* Configure the PIO controller */
++	writel((1 << AT91C_ID_PIOA), PMC_PCER + AT91C_BASE_PMC);
++	writel((1 << AT91C_ID_PIOCDE), PMC_PCER + AT91C_BASE_PMC);
++
++	pio_setup(nand_pio);
++
++	nand_recovery();
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_cfg_16bits_dbw_init						*/
++/* \brief Configure SMC in 16 bits mode						*/
++/*------------------------------------------------------------------------------*/
++void nandflash_cfg_16bits_dbw_init(void)
++{
++	writel(readl(AT91C_BASE_SMC0 + SMC_CTRL3) | AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS, AT91C_BASE_SMC0 + SMC_CTRL3);
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_cfg_8bits_dbw_init						*/
++/* \brief Configure SMC in 8 bits mode						*/
++/*------------------------------------------------------------------------------*/
++void nandflash_cfg_8bits_dbw_init(void)
++{
++	writel((readl(AT91C_BASE_SMC0 + SMC_CTRL3) & ~(AT91C_SMC_DBW)) | AT91C_SMC_DBW_WIDTH_EIGTH_BITS, AT91C_BASE_SMC0 + SMC_CTRL3);
++}
++
++#endif /* #ifdef CFG_NANDFLASH */
++
++
+diff --git a/crt0_gnu.S b/crt0_gnu.S
+index 042b617..002feef 100644
+--- a/crt0_gnu.S
++++ b/crt0_gnu.S
+@@ -106,6 +106,13 @@ _relocate_to_sram:
+ #endif /* CFG_NORFLASH */
+ 
+ _setup_clocks:
++/* Test if main osc is bypassed */
++	ldr 	r0,=AT91C_PMC_MOR
++	ldr 	r1, [r0]
++	ldr 	r2,=AT91C_CKGR_OSCBYPASS 
++	ands 	r1, r1, r2
++	bne	_init_data	/* branch if OSCBYPASS=1 */
++
+ /* Test if main oscillator is enabled */
+ 	ldr 	r0,=AT91C_PMC_SR
+ 	ldr 	r1, [r0]
+diff --git a/driver/dataflash.c b/driver/dataflash.c
+index e28e49e..4de295a 100644
+--- a/driver/dataflash.c
++++ b/driver/dataflash.c
+@@ -293,14 +293,14 @@ static int df_init (AT91PS_DF pDf)
+ 			pDf->dfDescription.pages_size = 264;
+ 			pDf->dfDescription.page_offset = 9;
+ 			break;
+-
++*/
+ 		case AT45DB021B:
+ 			pDf->dfDescription.pages_number = 1024;
+ 			pDf->dfDescription.pages_size = 264;
+ 			pDf->dfDescription.page_offset = 9;
+ 			break;
+ 
+-		case AT45DB041B:
++/*		case AT45DB041B:
+ 			pDf->dfDescription.pages_number = 2048;
+ 			pDf->dfDescription.pages_size = 264;
+ 			pDf->dfDescription.page_offset = 9;
+@@ -373,7 +373,7 @@ int load_df(unsigned int pcs, unsigned int img_addr, unsigned int img_size, unsi
+     if (!df_init(pDf))
+         return -1;
+ 
+-#if defined(AT91SAM9260) || defined(AT91SAM9XE) || defined(AT91SAM9G20)
++#if defined(AT91SAM9260) || defined(AT91SAM9263) || defined(AT91SAM9XE) || defined(AT91SAM9G20)
+     /* Test if a button has been pressed or not */
+     /* Erase Page 0 to avoid infinite loop */
+     df_recovery(pDf);
+diff --git a/include/part.h b/include/part.h
+index ba5985a..a1863d0 100644
+--- a/include/part.h
++++ b/include/part.h
+@@ -61,7 +61,11 @@
+ 
+ #ifdef AT91SAM9263
+ #include "AT91SAM9263_inc.h"
+-#include "at91sam9263ek.h"
++	#ifdef at91sam9263ek
++	#include "at91sam9263ek.h"
++	#elif usb_a9263
++	#include "usb-a9263.h"
++	#endif
+ #endif
+ 
+ #ifdef AT91CAP9
+-- 
+1.5.6.3
+

board/calao/usb-a9263/linux-3.4.4.config

@@ -0,0 +1,102 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_AT91=y
+CONFIG_ARCH_AT91SAM9263=y
+CONFIG_MACH_USB_A9263=y
+CONFIG_AT91_SLOW_CLOCK=y
+# CONFIG_ARM_THUMB is not set
+CONFIG_AEABI=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
+CONFIG_FPE_NWFPE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_SPI=y
+CONFIG_SPI_ATMEL=y
+# CONFIG_HWMON is not set
+# CONFIG_USB_HID is not set
+CONFIG_USB=y
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_MON=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_EXT2_FS=y
+CONFIG_FUSE_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_XATTR=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_LL=y

board/calao/usb-a9g20-lpw/linux-3.4.4.config

@@ -0,0 +1,105 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_AT91=y
+CONFIG_ARCH_AT91SAM9G20=y
+CONFIG_MACH_USB_A9G20=y
+CONFIG_AT91_SLOW_CLOCK=y
+# CONFIG_ARM_THUMB is not set
+CONFIG_AEABI=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
+CONFIG_FPE_NWFPE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_GPIO=y
+CONFIG_SPI=y
+CONFIG_SPI_ATMEL=y
+# CONFIG_HWMON is not set
+# CONFIG_USB_HID is not set
+CONFIG_USB=y
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_MON=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_RV3029C2=y
+CONFIG_EXT2_FS=y
+CONFIG_FUSE_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_XATTR=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_LL=y

board/calao/usb-a9g20-lpw/patches/at91bootstrap/0001-usb-a9g20-lpw.patch

@@ -0,0 +1,610 @@
+From 8d84757d5170969e8bdfebc7951f43c5aa2b05fd Mon Sep 17 00:00:00 2001
+From: Gregory Hermant <gregory.hermant@calao-systems.com>
+Date: Fri, 6 Jul 2012 16:32:47 +0200
+Subject: [PATCH] Add support for the Calao-systems USB-A9G20-LPW
+
+
+Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
+---
+ board/usb_a9g20_lpw/nandflash/Makefile        |  121 ++++++++++
+ board/usb_a9g20_lpw/nandflash/usb-a9g20-lpw.h |  112 +++++++++
+ board/usb_a9g20_lpw/usb_a9g20_lpw.c           |  303 +++++++++++++++++++++++++
+ crt0_gnu.S                                    |    7 +
+ include/part.h                                |    6 +-
+ 5 files changed, 548 insertions(+), 1 deletions(-)
+ create mode 100644 board/usb_a9g20_lpw/nandflash/Makefile
+ create mode 100644 board/usb_a9g20_lpw/nandflash/usb-a9g20-lpw.h
+ create mode 100644 board/usb_a9g20_lpw/usb_a9g20_lpw.c
+
+diff --git a/board/usb_a9g20_lpw/nandflash/Makefile b/board/usb_a9g20_lpw/nandflash/Makefile
+new file mode 100644
+index 0000000..8c9d99a
+--- /dev/null
++++ b/board/usb_a9g20_lpw/nandflash/Makefile
+@@ -0,0 +1,121 @@
++# TODO: set this appropriately for your local toolchain
++ifndef ERASE_FCT
++ERASE_FCT=rm -f
++endif
++ifndef CROSS_COMPILE
++CROSS_COMPILE=arm-elf-
++endif
++
++TOOLCHAIN=gcc
++
++BOOTSTRAP_PATH=../../..
++
++# NandFlashBoot Configuration for USB-A9G20-LPW
++
++# Target name (case sensitive!!!)
++TARGET=AT91SAM9G20
++# Board name (case sensitive!!!)
++BOARD=usb_a9g20_lpw
++# Link Address and Top_of_Memory
++LINK_ADDR=0x200000
++TOP_OF_MEMORY=0x301000
++# Name of current directory
++PROJECT=nandflash
++
++ifndef BOOT_NAME
++BOOT_NAME=$(PROJECT)_$(BOARD)
++endif
++
++INCL=./$(BOOTSTRAP_PATH)/board/$(BOARD)/$(PROJECT)
++
++ifeq ($(TOOLCHAIN), gcc)
++
++AS=$(CROSS_COMPILE)gcc
++CC=$(CROSS_COMPILE)gcc
++LD=$(CROSS_COMPILE)gcc
++NM= $(CROSS_COMPILE)nm
++SIZE=$(CROSS_COMPILE)size
++OBJCOPY=$(CROSS_COMPILE)objcopy
++OBJDUMP=$(CROSS_COMPILE)objdump
++CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL)
++ASFLAGS=-g -mcpu=arm926ej-s -c -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
++
++# Linker flags.
++#  -Wl,...:     tell GCC to pass this to linker.
++#    -Map:      create map file
++#    --cref:    add cross reference to map file
++LDFLAGS+=-nostartfiles -nostdlib -Wl,-Map=$(BOOT_NAME).map,--cref
++LDFLAGS+=-T $(BOOTSTRAP_PATH)/elf32-littlearm.lds -Ttext $(LINK_ADDR)
++OBJS=crt0_gnu.o
++
++endif
++
++OBJS+=\
++	$(BOARD).o \
++	main.o \
++	gpio.o \
++	pmc.o \
++	debug.o \
++	sdramc.o \
++	nandflash.o \
++	_udivsi3.o \
++	_umodsi3.o \
++	div0.o \
++	udiv.o \
++	string.o
++
++rebuild: clean all
++
++all: 	$(BOOT_NAME)
++
++ifeq ($(TOOLCHAIN), gcc)
++$(BOOT_NAME): $(OBJS)
++	$(LD) $(LDFLAGS) -n -o $(BOOT_NAME).elf $(OBJS)
++	$(OBJCOPY) --strip-debug --strip-unneeded $(BOOT_NAME).elf -O binary $(BOOT_NAME).bin
++endif
++
++
++$(BOARD).o: $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c -o $(BOARD).o
++
++main.o: $(BOOTSTRAP_PATH)/main.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/main.c -o main.o
++
++gpio.o: $(BOOTSTRAP_PATH)/driver/gpio.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/gpio.c -o gpio.o
++
++pmc.o:  $(BOOTSTRAP_PATH)/driver/pmc.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/pmc.c -o pmc.o
++
++debug.o: $(BOOTSTRAP_PATH)/driver/debug.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/debug.c -o debug.o
++
++sdramc.o:  $(BOOTSTRAP_PATH)/driver/sdramc.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/sdramc.c -o sdramc.o
++
++dataflash.o:  $(BOOTSTRAP_PATH)/driver/dataflash.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/dataflash.c -o dataflash.o
++
++nandflash.o:  $(BOOTSTRAP_PATH)/driver/nandflash.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/nandflash.c -o nandflash.o
++
++crt0_gnu.o:  $(BOOTSTRAP_PATH)/crt0_gnu.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/crt0_gnu.S -o crt0_gnu.o
++
++div0.o:  $(BOOTSTRAP_PATH)/lib/div0.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/div0.c -o div0.o
++
++string.o:  $(BOOTSTRAP_PATH)/lib/string.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/string.c -o string.o
++
++udiv.o:  $(BOOTSTRAP_PATH)/lib/udiv.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/udiv.c -o udiv.o
++
++_udivsi3.o:  $(BOOTSTRAP_PATH)/lib/_udivsi3.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_udivsi3.S -o _udivsi3.o
++
++_umodsi3.o:  $(BOOTSTRAP_PATH)/lib/_umodsi3.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_umodsi3.S -o _umodsi3.o
++
++clean:
++	$(ERASE_FCT) *.o *.bin *.elf *.map
+diff --git a/board/usb_a9g20_lpw/nandflash/usb-a9g20-lpw.h b/board/usb_a9g20_lpw/nandflash/usb-a9g20-lpw.h
+new file mode 100644
+index 0000000..c0bdc6e
+--- /dev/null
++++ b/board/usb_a9g20_lpw/nandflash/usb-a9g20-lpw.h
+@@ -0,0 +1,112 @@
++/* ----------------------------------------------------------------------------
++ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
++ * ----------------------------------------------------------------------------
++ * Copyright (c) 2008, Atmel Corporation
++
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ *
++ * - Redistributions of source code must retain the above copyright notice,
++ * this list of conditions and the disclaimer below.
++ *
++ * Atmel's name may not be used to endorse or promote products derived from
++ * this software without specific prior written permission.
++ *
++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ----------------------------------------------------------------------------
++ * File Name           : usb-a9g20-lpw.h
++ * Object              :
++ * Creation            : GH July 6th 2012
++ *-----------------------------------------------------------------------------
++ */
++#ifndef _USB_A9G20_LPW_H
++#define _USB_A9G20_LPW_H
++
++/* ******************************************************************* */
++/* PMC Settings                                                        */
++/*                                                                     */
++/* The main oscillator is enabled as soon as possible in the c_startup */
++/* and MCK is switched on the main oscillator.                         */
++/* PLL initialization is done later in the hw_init() function          */
++/* ******************************************************************* */
++#define MASTER_CLOCK		(133000000)
++#define PLL_LOCK_TIMEOUT	1000000
++
++/* Set PLLA to 798Mhz */
++#define PLLA_SETTINGS	0x20843F02
++#define PLLB_SETTINGS	0x100F3F02
++
++/* Switch MCK on PLLA output PCK = PLLA/2 = 3 * MCK */
++#define MCKR_SETTINGS		0x1300
++#define MCKR_CSS_SETTINGS	(AT91C_PMC_CSS_PLLA_CLK | MCKR_SETTINGS)
++
++/* ******************************************************************* */
++/* NandFlash Settings                                                  */
++/*                                                                     */
++/* ******************************************************************* */
++#define AT91C_SMARTMEDIA_BASE	0x40000000
++
++#define AT91_SMART_MEDIA_ALE    (1 << 21)	/* our ALE is AD21 */
++#define AT91_SMART_MEDIA_CLE    (1 << 22)	/* our CLE is AD22 */
++
++#define NAND_DISABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_SODR = AT91C_PIO_PC14;} while(0)
++#define NAND_ENABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_CODR = AT91C_PIO_PC14;} while(0)
++
++#define NAND_WAIT_READY() while (!(*(volatile unsigned int *)AT91C_PIOC_PDSR & AT91C_PIO_PC13))
++
++
++/* ******************************************************************** */
++/* SMC Chip Select 3 Timings for NandFlash for MASTER_CLOCK = 133000000.*/
++/* Please refer to SMC section in AT91SAM9 datasheet to learn how 	*/
++/* to generate these values. 						*/
++/* ******************************************************************** */
++#define AT91C_SM_NWE_SETUP	(2 << 0)
++#define AT91C_SM_NCS_WR_SETUP	(0 << 8)
++#define AT91C_SM_NRD_SETUP	(2 << 16)
++#define AT91C_SM_NCS_RD_SETUP	(0 << 24)
++  
++#define AT91C_SM_NWE_PULSE 	(4 << 0)
++#define AT91C_SM_NCS_WR_PULSE	(4 << 8)
++#define AT91C_SM_NRD_PULSE	(4 << 16)
++#define AT91C_SM_NCS_RD_PULSE	(4 << 24)
++  
++#define AT91C_SM_NWE_CYCLE 	(7 << 0)
++#define AT91C_SM_NRD_CYCLE	(7 << 16)
++
++#define AT91C_SM_TDF	        (3 << 16)
++
++/* ******************************************************************* */
++/* BootStrap Settings                                                  */
++/*                                                                     */
++/* ******************************************************************* */
++#define IMG_ADDRESS 		0x20000			/* Image Address in NandFlash */
++#define	IMG_SIZE		0x40000			/* Image Size in NandFlash */
++
++#define MACH_TYPE		0x731			/* USB-A9G20 */
++#define JUMP_ADDR		0x23F00000		/* Final Jump Address */
++
++/* ******************************************************************* */
++/* Application Settings                                                */
++/* ******************************************************************* */
++#undef CFG_DEBUG
++#undef CFG_DATAFLASH
++
++#define CFG_NANDFLASH
++#undef	NANDFLASH_SMALL_BLOCKS	/* NANDFLASH_LARGE_BLOCKS used instead */
++#undef  CFG_NANDFLASH_RECOVERY
++
++#define	CFG_SDRAM
++#define	CFG_HW_INIT
++
++#endif	/* _USB_A9G20_LPW_H */
+diff --git a/board/usb_a9g20_lpw/usb_a9g20_lpw.c b/board/usb_a9g20_lpw/usb_a9g20_lpw.c
+new file mode 100644
+index 0000000..c372307
+--- /dev/null
++++ b/board/usb_a9g20_lpw/usb_a9g20_lpw.c
+@@ -0,0 +1,303 @@
++/* ----------------------------------------------------------------------------
++ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
++ * ----------------------------------------------------------------------------
++ * Copyright (c) 2008, Atmel Corporation
++
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ *
++ * - Redistributions of source code must retain the above copyright notice,
++ * this list of conditions and the disclaimer below.
++ *
++ * Atmel's name may not be used to endorse or promote products derived from
++ * this software without specific prior written permission.
++ *
++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ----------------------------------------------------------------------------
++ * File Name           : usb_a9g20_lpw.c
++ * Object              :
++ * Creation            : GH July 6th 2012
++ *-----------------------------------------------------------------------------
++ */
++#include "../../include/part.h"
++#include "../../include/gpio.h"
++#include "../../include/pmc.h"
++#include "../../include/debug.h"
++#include "../../include/sdramc.h"
++#include "../../include/main.h"
++#ifdef CFG_NANDFLASH
++#include "../../include/nandflash.h"
++#endif
++#ifdef CFG_DATAFLASH
++#include "../../include/dataflash.h"
++#endif
++
++static inline unsigned int get_cp15(void)
++{
++	unsigned int value;
++	__asm__("mrc p15, 0, %0, c1, c0, 0" : "=r" (value));
++	return value;
++}
++
++static inline void set_cp15(unsigned int value)
++{
++	__asm__("mcr p15, 0, %0, c1, c0, 0" : : "r" (value));
++}
++
++#ifdef CFG_HW_INIT
++/*----------------------------------------------------------------------------*/
++/* \fn    hw_init							      */
++/* \brief This function performs very low level HW initialization	      */
++/* This function is invoked as soon as possible during the c_startup	      */
++/* The bss segment must be initialized					      */
++/*----------------------------------------------------------------------------*/
++void hw_init(void)
++{
++	unsigned int cp15;
++	
++	/* Configure PIOs */
++	const struct pio_desc hw_pio[] = {
++#ifdef CFG_DEBUG
++		{"RXD", AT91C_PIN_PB(14), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"TXD", AT91C_PIN_PB(15), 0, PIO_DEFAULT, PIO_PERIPH_A},
++#endif
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Disable watchdog */
++	writel(AT91C_WDTC_WDDIS, AT91C_BASE_WDTC + WDTC_WDMR);
++
++	/* At this stage the main oscillator is supposed to be enabled
++	 * PCK = MCK = MOSC */
++	writel(0x00, AT91C_BASE_PMC + PMC_PLLICPR);
++
++	/* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */
++	pmc_cfg_plla(PLLA_SETTINGS, PLL_LOCK_TIMEOUT);
++
++	/* PCK = PLLA/2 = 3 * MCK */
++	pmc_cfg_mck(MCKR_SETTINGS, PLL_LOCK_TIMEOUT);
++	/* Switch MCK on PLLA output */
++	pmc_cfg_mck(MCKR_CSS_SETTINGS, PLL_LOCK_TIMEOUT);
++
++	/* Configure PLLB */
++	pmc_cfg_pllb(PLLB_SETTINGS, PLL_LOCK_TIMEOUT);
++
++	/* Configure CP15 */
++	cp15 = get_cp15();
++	cp15 |= I_CACHE;
++	set_cp15(cp15);
++
++	/* Configure the PIO controller */
++	pio_setup(hw_pio);
++
++	/* Configure the EBI Slave Slot Cycle to 64 */
++	writel((readl((AT91C_BASE_MATRIX + MATRIX_SCFG3)) & ~0xFF) | 0x40, (AT91C_BASE_MATRIX + MATRIX_SCFG3));
++
++#ifdef CFG_DEBUG
++	/* Enable Debug messages on the DBGU */
++	dbg_init(BAUDRATE(MASTER_CLOCK, 115200));
++
++	dbg_print("Start AT91Bootstrap...\n\r");
++#endif /* CFG_DEBUG */
++
++#ifdef CFG_SDRAM
++	/* Initialize the matrix (VDDIOSEL=0: memory voltage = 1.8V ) */
++	writel((readl(AT91C_BASE_CCFG + CCFG_EBICSA) & ~0x00010000) | AT91C_EBI_CS1A_SDRAMC , AT91C_BASE_CCFG + CCFG_EBICSA);
++
++	/* Configure SDRAM Controller */
++	sdram_init(	AT91C_SDRAMC_NC_9  |
++				AT91C_SDRAMC_NR_13 |
++				AT91C_SDRAMC_CAS_3 |
++				AT91C_SDRAMC_NB_4_BANKS |
++				AT91C_SDRAMC_DBW_32_BITS |
++				AT91C_SDRAMC_TWR_3 |
++				AT91C_SDRAMC_TRC_9 |
++				AT91C_SDRAMC_TRP_3 |
++				AT91C_SDRAMC_TRCD_3 |
++				AT91C_SDRAMC_TRAS_6 |
++				AT91C_SDRAMC_TXSR_10,		/* Control Register */
++				(MASTER_CLOCK * 7)/1000000,	/* Refresh Timer Register */
++                                AT91C_SDRAMC_MD_SDRAM);         /* SDRAM (no low power)   */
++
++#endif /* CFG_SDRAM */
++}
++#endif /* CFG_HW_INIT */
++
++#ifdef CFG_SDRAM
++/*------------------------------------------------------------------------------*/
++/* \fn    sdramc_hw_init							*/
++/* \brief This function performs SDRAMC HW initialization			*/
++/*------------------------------------------------------------------------------*/
++void sdramc_hw_init(void)
++{
++	/* Configure PIOs */
++/*	const struct pio_desc sdramc_pio[] = {
++		{"D16", AT91C_PIN_PC(16), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D17", AT91C_PIN_PC(17), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D18", AT91C_PIN_PC(18), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D19", AT91C_PIN_PC(19), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D20", AT91C_PIN_PC(20), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D21", AT91C_PIN_PC(21), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D22", AT91C_PIN_PC(22), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D23", AT91C_PIN_PC(23), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D24", AT91C_PIN_PC(24), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D25", AT91C_PIN_PC(25), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D26", AT91C_PIN_PC(26), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D27", AT91C_PIN_PC(27), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D28", AT91C_PIN_PC(28), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D29", AT91C_PIN_PC(29), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D30", AT91C_PIN_PC(30), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D31", AT91C_PIN_PC(31), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++*/
++	/* Configure the SDRAMC PIO controller to output PCK0 */
++/*	pio_setup(sdramc_pio); */
++
++	writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_ASR(0));
++	writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_PDR(0));
++
++}
++#endif /* CFG_SDRAM */
++
++#ifdef CFG_DATAFLASH
++
++/*------------------------------------------------------------------------------*/
++/* \fn    df_recovery								*/
++/* \brief This function erases DataFlash Page 0 if USR PB is pressed 		*/
++/*        during boot sequence							*/
++/*------------------------------------------------------------------------------*/
++void df_recovery(AT91PS_DF pDf)
++{
++#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS1_DATAFLASH)
++	/* Configure PIOs */
++	const struct pio_desc usrpb[] = {
++		{"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the PIO controller */
++	writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
++	pio_setup(usrpb);
++	
++	/* If USR PB is pressed during Boot sequence */
++	/* Erase NandFlash block 0*/
++	if ( !pio_get_value(AT91C_PIN_PB(10)) )
++		df_page_erase(pDf, 0);
++#endif
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    df_hw_init								*/
++/* \brief This function performs DataFlash HW initialization			*/
++/*------------------------------------------------------------------------------*/
++void df_hw_init(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc df_pio[] = {
++		{"MISO",  AT91C_PIN_PA(0), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"MOSI",  AT91C_PIN_PA(1), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"SPCK",  AT91C_PIN_PA(2), 0, PIO_DEFAULT, PIO_PERIPH_A},
++#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS0_DATAFLASH)
++		{"NPCS0", AT91C_PIN_PA(3), 0, PIO_DEFAULT, PIO_PERIPH_A},
++#endif
++#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS1_DATAFLASH)
++		{"NPCS1", AT91C_PIN_PC(11), 0, PIO_DEFAULT, PIO_PERIPH_B},
++#endif
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the PIO controller */
++	pio_setup(df_pio);
++}
++#endif /* CFG_DATAFLASH */
++
++
++
++#ifdef CFG_NANDFLASH
++/*------------------------------------------------------------------------------*/
++/* \fn    nand_recovery						*/
++/* \brief This function erases NandFlash Block 0 if USER PB is pressed 		*/
++/*        during boot sequence							*/
++/*------------------------------------------------------------------------------*/
++#ifdef CFG_NANDFLASH_RECOVERY
++static void nand_recovery(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc usrpb[] = {
++		{"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the PIO controller */
++	writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
++	pio_setup(usrpb);
++	
++	/* If USER PB is pressed during Boot sequence */
++	/* Erase NandFlash block 0*/
++	if (!pio_get_value(AT91C_PIN_PB(10)) )
++		AT91F_NandEraseBlock0();
++}
++#else
++static void nand_recovery(void) {}
++#endif
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_hw_init							*/
++/* \brief NandFlash HW init							*/
++/*------------------------------------------------------------------------------*/
++void nandflash_hw_init(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc nand_pio[] = {
++		{"RDY_BSY", AT91C_PIN_PC(13), 0, PIO_PULLUP, PIO_INPUT},
++		{"NANDCS",  AT91C_PIN_PC(14), 0, PIO_PULLUP, PIO_OUTPUT},
++		{(char *) 0, 0, 0,  PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Setup Smart Media, first enable the address range of CS3 in HMATRIX user interface */
++	writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) | AT91C_EBI_CS3A_SM, AT91C_BASE_CCFG + CCFG_EBICSA);
++		    
++	/* Configure SMC CS3 */
++ 	writel((AT91C_SM_NWE_SETUP | AT91C_SM_NCS_WR_SETUP | AT91C_SM_NRD_SETUP | AT91C_SM_NCS_RD_SETUP), AT91C_BASE_SMC + SMC_SETUP3);
++  	writel((AT91C_SM_NWE_PULSE | AT91C_SM_NCS_WR_PULSE | AT91C_SM_NRD_PULSE | AT91C_SM_NCS_RD_PULSE), AT91C_BASE_SMC + SMC_PULSE3);
++	writel((AT91C_SM_NWE_CYCLE | AT91C_SM_NRD_CYCLE)						, AT91C_BASE_SMC + SMC_CYCLE3);
++	writel((AT91C_SMC_READMODE | AT91C_SMC_WRITEMODE | AT91C_SMC_NWAITM_NWAIT_DISABLE | 
++  		AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS | AT91C_SM_TDF)						, AT91C_BASE_SMC + SMC_CTRL3);
++
++	/* Configure the PIO controller */
++	writel((1 << AT91C_ID_PIOC), PMC_PCER + AT91C_BASE_PMC);
++	pio_setup(nand_pio);
++	
++	nand_recovery();
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_cfg_16bits_dbw_init						*/
++/* \brief Configure SMC in 16 bits mode						*/
++/*------------------------------------------------------------------------------*/
++void nandflash_cfg_16bits_dbw_init(void)
++{
++	writel(readl(AT91C_BASE_SMC + SMC_CTRL3) | AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS, AT91C_BASE_SMC + SMC_CTRL3);
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_cfg_8bits_dbw_init						*/
++/* \brief Configure SMC in 8 bits mode						*/
++/*------------------------------------------------------------------------------*/
++void nandflash_cfg_8bits_dbw_init(void)
++{
++	writel((readl(AT91C_BASE_SMC + SMC_CTRL3) & ~(AT91C_SMC_DBW)) | AT91C_SMC_DBW_WIDTH_EIGTH_BITS, AT91C_BASE_SMC + SMC_CTRL3);
++}
++
++#endif /* #ifdef CFG_NANDFLASH */
+diff --git a/crt0_gnu.S b/crt0_gnu.S
+index 042b617..002feef 100644
+--- a/crt0_gnu.S
++++ b/crt0_gnu.S
+@@ -106,6 +106,13 @@ _relocate_to_sram:
+ #endif /* CFG_NORFLASH */
+ 
+ _setup_clocks:
++/* Test if main osc is bypassed */
++	ldr 	r0,=AT91C_PMC_MOR
++	ldr 	r1, [r0]
++	ldr 	r2,=AT91C_CKGR_OSCBYPASS 
++	ands 	r1, r1, r2
++	bne	_init_data	/* branch if OSCBYPASS=1 */
++
+ /* Test if main oscillator is enabled */
+ 	ldr 	r0,=AT91C_PMC_SR
+ 	ldr 	r1, [r0]
+diff --git a/include/part.h b/include/part.h
+index ba5985a..1d7392a 100644
+--- a/include/part.h
++++ b/include/part.h
+@@ -46,7 +46,11 @@
+ 
+ #ifdef AT91SAM9G20
+ #include "AT91SAM9260_inc.h"
+-#include "at91sam9g20ek.h"
++	#ifdef at91sam9g20ek
++	#include "at91sam9g20ek.h"
++	#elif usb_a9g20_lpw
++	#include "usb-a9g20-lpw.h"
++	#endif
+ #endif
+ 
+ #ifdef AT91SAM9261
+-- 
+1.5.6.3
+

board/calao/usb-a9g20-lpw/patches/barebox/0001-usb-a9g20-lpw.patch

@@ -0,0 +1,12 @@
+diff --git a/arch/arm/configs/usb_a9g20_defconfig b/arch/arm/configs/usb_a9g20_defconfig
+index 30bf380..7716e0e 100644
+--- a/arch/arm/configs/usb_a9g20_defconfig
++++ b/arch/arm/configs/usb_a9g20_defconfig
+@@ -15,6 +15,7 @@ CONFIG_HUSH_FANCY_PROMPT=y
+ CONFIG_CMDLINE_EDITING=y
+ CONFIG_AUTO_COMPLETE=y
+ CONFIG_MENU=y
++# CONFIG_ERRNO_MESSAGES is not set
+ # CONFIG_CONSOLE_ACTIVATE_FIRST is not set
+ CONFIG_CONSOLE_ACTIVATE_ALL=y
+ CONFIG_PARTITION=y

board/chromebook/snow/mksd.sh

@@ -14,8 +14,8 @@
 # cgpt does not create protective MBR, and the kernel refuses to read
 # GPT unless there's some kind of MBR in sector 0. So we need parted
 # to write that single sector before doing anything with the GPT.
-cgpt=$HOST_DIR/bin/cgpt
-parted=$HOST_DIR/sbin/parted
+cgpt=$HOST_DIR/usr/bin/cgpt
+parted=$HOST_DIR/usr/sbin/parted
 kernel=$BINARIES_DIR/uImage.kpart
 rootfs=$BINARIES_DIR/rootfs.ext2
 

board/chromebook/snow/readme.txt

@@ -88,7 +88,7 @@ you will probably want the rootfs to occupy the whole remaining space.
 
 cgpt may be used to check current layout:
 
-	output/host/bin/cgpt show $SD
+	output/host/usr/bin/cgpt show $SD
 
 All sizes and all offsets are in 512-byte blocks.
 

board/chromebook/snow/sign.sh

@@ -5,9 +5,9 @@
 # The resulting file is called uImage.kpart.
 
 BOARD_DIR=$(dirname $0)
-mkimage=$HOST_DIR/bin/mkimage
-futility=$HOST_DIR/bin/futility
-devkeys=$HOST_DIR/share/vboot/devkeys
+mkimage=$HOST_DIR/usr/bin/mkimage
+futility=$HOST_DIR/usr/bin/futility
+devkeys=$HOST_DIR/usr/share/vboot/devkeys
 
 run() { echo "$@"; "$@"; }
 die() { echo "$@" >&2; exit 1; }

board/ci40/genimage.cfg

@@ -1,12 +0,0 @@
-# Minimal SD card image
-#
-
-image sdcard.img {
-  hdimage {
-  }
-
-  partition rootfs {
-    partition-type = 0x83
-    image = "rootfs.ext4"
-  }
-}

board/ci40/post-build.sh

@@ -1,4 +0,0 @@
-#!/bin/sh
-
-# Copy to target
-cp ${BINARIES_DIR}/vmlinux.gz.itb ${TARGET_DIR}/fitImage

board/ci40/readme.txt

@@ -1,65 +0,0 @@
-*********************
-* MIPS Creator CI40 *
-*********************
-
-This document details how to build and run a Buildroot system on the
-MIPS Creator CI40 platform. For more details about the CI40, see
-https://creatordev.io/ci40-iot-hub.html.
-
-How to build
-------------
-
-$ make ci40_defconfig
-$ make
-
-Prepare USB/MMC for boot
-------------------------
-
-On successful build, "sdcard.img" file will be created in 'output/images'
-folder.
-
-Use following command to write image to bootable device
-
-$ sudo dd if=./output/images/sdcard.img of=/dev/<your-microsd-or-usb-device>
-
-Booting from USB/MMC
---------------------
-
-The boot loader is already present in NOR flash. To boot your newly generated
-Linux and root filesystem, you need to interrupt U-Boot autoboot. Current
-U-Boot is configured with 2 seconds of boot-delay, after expiry of this
-boot-delay timeout U-Boot starts booting the default image. To interrupt
-autoboot, press any key before the boot-delay time expires, U-Boot will
-stop the autoboot process and give a U-Boot prompt. You can now boot to
-your preferred boot method as describe below:
-
-From USB
-  pistachio # run usbboot
-
-From SD-Card
-  pistachio # run mmcboot
-
-Persistent boot command
------------------------
-
-To boot automatically to your preferred boot method, use following command to
-make it persistent, for example to automatically boot to usb:
-
-  pistachio # setenv bootcmd run usbboot
-  pistachio # saveenv
-
-Flash new bootloader
---------------------
-
-The bootloader image will be available in the 'output/images' folder. To flash
-the new bootloader, copy it to the device and use the following command on the
-device:
-
-# flashcp -v u-boot-pistachio_marduk-<version>.img /dev/mtd0
-
-Online docs
------------
-
-Mostly for OpenWRT but it is applicable to Buildroot
-https://docs.creatordev.io/ci40/guides/openwrt-platform/#overview
-

board/congatec/qmx6/readme.txt

@@ -0,0 +1,36 @@
+This is the minimal buildroot support for the Congatec QMX6 Qseven CoM
+
+conga-QMX6 is based on the freescale iMX6 SoC. For more information please
+have a look at http://www.congatec.com/products/qseven/conga-qmx6.html
+
+The configuration is based on the currently latest kernel release from
+Congatec's git repository which is based on 3.0.35. The bootloader u-boot
+is preconfigured on the CPU module and does not need to be replaced.
+
+To build the default configuration you only have to:
+
+	make qmx6_defconfig && make
+
+You will need a microSD card of sufficient size and the first or only
+partition configured as Linux type.
+
+To transfer the system to the card do:
+
+	$ sudo dd if=output/images/rootfs.ext2 of=/dev/sdX1
+
+You can optionally extend the filesystem size to the whole partition:
+
+	$ sudo resize2fs /dev/sdX1
+
+You can also update the card image without completely rewriting it:
+
+	$ sudo mount /dev/sdX1 /mnt
+	$ sudo tar xf output/images/rootfs.tar -C /mnt
+	$ sudo umount /mnt
+
+Connect a terminal program to the rs232 connector marked "CONSOLE"
+with baudrate set to 115200, insert the microSD card into the socket
+on the CPU module and power the board to watch the system boot.
+
+Booting from the SD card slot on the base board is currently not
+supported.

board/csky/gx6605s/gdbinit

@@ -1,25 +0,0 @@
-tar jtag jtag://127.0.0.1:1025
-reset
-
-# setup CCR (Cache Config Reg)
-# 0-1:MP,2:IE,3:DE,4:WB,5:RS,6:Z,7:BE
-set $cr18 = 0x7d
-
-# vendor custom setup, double cache line & preload
-set $cr30 = 0xc
-
-# pin mux for serial8250
-set *(unsigned int *) 0xa030a14c |= (1 << 22) | (1 << 23)
-
-# pass devicetree blob
-# r2 is magic
-# r3 is address
-set $r2 = 0x20150401
-set $r3 = 0x92000000
-restore gx6605s.dtb binary 0x92000000
-
-# flush cache
-set $cr17 = 0x33
-
-load
-

board/csky/readme.txt

@@ -1,88 +0,0 @@
-C-SKY Development Kit
-
-Intro
-=====
-
-C-SKY is a CPU Architecture from www.c-sky.com and has it own instruction set.
-Just like arm and mips in linux/arch, it named as 'csky'.
-
-gx6605s develop board is made by Hangzhou Nationalchip and C-SKY.
-
-Hardware Spec:
-  * CPU: ck610 up to 594Mhz
-  * Integrate with 64MB ddr2 in SOC.
-  * Integrate with hardware Jtag.
-  * Integrate with usb-to-serial chip.
-  * USB ehci controller in SOC.
-  * Power Supply: DC 5V from two micro-usb.
-
-How to build it
-===============
-
-Configure Buildroot
--------------------
-
-The csky_gx6605s_defconfig configuration is a sample configuration with
-all that is required to bring the gx6605s Development Board:
-
-  $ make csky_gx6605s_defconfig
-
-Build everything
-----------------
-
-Note: you will need to have access to the network, since Buildroot will
-download the packages' sources.
-
-  $ make
-
-Result of the build
--------------------
-
-After building, you should obtain this tree:
-
-    output/images/
-    ├── vmlinux
-    ├── rootfs.ext2
-    └── <board name>.dtb
-
-How to run it
-=============
-
-Prepare Jtag-Server
--------------------
-
-  Download the Jtag-Server here:
-
-  https://github.com/c-sky/tools/raw/master/DebugServerConsole-linux-x86_64-V4.2.00-20161213.tar.gz
-
-  Go to the unpacked directory:
-
-  $./DebugServerConsole -ddc -rstwait 1000 -prereset -port 1025
-
-  Perhaps you need to use "sudo", which need libusb to detect c510:b210
-
-  $ sudo ./DebugServerConsole -ddc -rstwait 1000 -prereset -port 1025
-
-Prepare USB drive
------------------
-
-  You sould determine which device associated to the usb drive
-  carefully. eg:
-
-  $ cat /proc/partitions
-   8       48    1971712 sdd
-   8       49     976720 sdd1
-
-  $ sudo dd if=rootfs.ext2 of=/dev/sdd1
-  $ sudo sync
-
-Run
----
-
-  Plug the usb drive on gx6605s dev board.
-
-  Setup the Console with the rate 115200/8-N-1.
-
-  $ cd output/images
-  $ ../host/bin/csky-linux-gdb -x ../../board/csky/gx6605s/gdbinit vmlinux
-

board/cubietech/cubieboard/boot.cmd

@@ -0,0 +1,4 @@
+setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait panic=10 ${extra}
+fatload mmc 0 0x43000000 script.bin
+fatload mmc 0 0x48000000 uImage
+bootm 0x48000000

board/cubietech/cubieboard/linux-cubieboard2.config

@@ -0,0 +1,749 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_RCU_FAST_NO_HZ=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=19
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_CGROUP_MEM_RES_CTLR=y
+CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
+CONFIG_CGROUP_MEM_RES_CTLR_KMEM=y
+CONFIG_CGROUP_PERF=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_BLK_CGROUP=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_PERF_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_JUMP_LABEL=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLK_DEV_BSGLIB=y
+CONFIG_BLK_DEV_INTEGRITY=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+CONFIG_MAC_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_SGI_PARTITION=y
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+CONFIG_ARCH_SUN7I=y
+CONFIG_SUNXI_SCALING_MIN=408
+# CONFIG_CACHE_L2X0 is not set
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_SMP=y
+CONFIG_ARM_ARCH_TIMER=y
+CONFIG_NR_CPUS=2
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_HIGHMEM=y
+CONFIG_COMPACTION=y
+CONFIG_KSM=y
+CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/mmc0p1 rw init=/init loglevel=8"
+CONFIG_KEXEC=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_DEFAULT_GOV_FANTASY=y
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=m
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_INTERACTIVE=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+CONFIG_CPU_FREQ_USR_EVNT_NOTIFY=y
+CONFIG_CPU_FREQ_DVFS=y
+CONFIG_CPU_IDLE=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_BINFMT_MISC=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM_DEBUG=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_FIB_TRIE_STATS=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=y
+CONFIG_NET_IPGRE_DEMUX=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_ARPD=y
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=y
+CONFIG_INET_ESP=y
+CONFIG_INET_IPCOMP=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_UDP_DIAG=m
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_WESTWOOD=y
+CONFIG_TCP_CONG_HTCP=y
+CONFIG_TCP_CONG_HSTCP=y
+CONFIG_TCP_CONG_HYBLA=y
+CONFIG_TCP_CONG_SCALABLE=y
+CONFIG_TCP_CONG_LP=y
+CONFIG_TCP_CONG_VENO=y
+CONFIG_TCP_CONG_YEAH=y
+CONFIG_TCP_CONG_ILLINOIS=y
+CONFIG_TCP_MD5SIG=y
+CONFIG_IPV6=y
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_SIT_6RD=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IPV6_PIMSM_V2=y
+# CONFIG_ANDROID_PARANOID_NETWORK is not set
+CONFIG_NETWORK_SECMARK=y
+CONFIG_NETWORK_PHY_TIMESTAMPING=y
+CONFIG_NETFILTER=y
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_ZONES=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CONNTRACK_TIMEOUT=y
+CONFIG_NF_CONNTRACK_TIMESTAMP=y
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NF_CT_NETLINK_TIMEOUT=m
+CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_XT_SET=m
+CONFIG_NETFILTER_XT_TARGET_AUDIT=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
+CONFIG_NETFILTER_XT_TARGET_CT=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CPU=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_IPVS=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA2=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
+CONFIG_IP_VS=m
+CONFIG_IP_VS_IPV6=y
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+CONFIG_IP_VS_PROTO_SCTP=y
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+CONFIG_IP_VS_FTP=m
+CONFIG_IP_VS_PE_SIP=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_REJECT_SKERR=y
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_REJECT_SKERR=y
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_IP6=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_ULOG=m
+CONFIG_BRIDGE_EBT_NFLOG=m
+CONFIG_L2TP=m
+CONFIG_L2TP_V3=y
+CONFIG_L2TP_IP=m
+CONFIG_L2TP_ETH=m
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_BATMAN_ADV=m
+CONFIG_OPENVSWITCH=m
+CONFIG_NETPRIO_CGROUP=m
+CONFIG_NET_PKTGEN=m
+CONFIG_IRDA=m
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+CONFIG_IRDA_ULTRA=y
+CONFIG_IRTTY_SIR=m
+CONFIG_KINGSUN_DONGLE=m
+CONFIG_KSDAZZLE_DONGLE=m
+CONFIG_KS959_DONGLE=m
+CONFIG_USB_IRDA=m
+CONFIG_SIGMATEL_FIR=m
+CONFIG_MCS_FIR=m
+CONFIG_BT=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+CONFIG_BT_ATH3K=m
+CONFIG_AF_RXRPC=m
+CONFIG_RXKAD=m
+CONFIG_CFG80211=y
+CONFIG_CFG80211_DEVELOPER_WARNINGS=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
+CONFIG_CFG80211_ALLOW_RECONNECT=y
+CONFIG_MAC80211=m
+CONFIG_MAC80211_MESH=y
+CONFIG_WIMAX=m
+CONFIG_RFKILL=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_CONNECTOR=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=2
+CONFIG_SUNXI_DBGREG=m
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_ATA=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_SW_SATA_AHCI_PLATFORM=y
+CONFIG_NETDEVICES=y
+CONFIG_BONDING=m
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+CONFIG_SUNXI_EMAC=y
+CONFIG_PHYLIB=y
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOE=m
+CONFIG_PPPOLAC=m
+CONFIG_PPPOPNS=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_USB_IPHETH=m
+CONFIG_ATH_COMMON=m
+CONFIG_ATH9K=m
+CONFIG_RTL8192CU=m
+CONFIG_RTL8192CU_SW=m
+CONFIG_RTL8188EU=m
+CONFIG_RTXX7X_SW=m
+CONFIG_INPUT_POLLDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_JOYDEV=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_KEYRESET=y
+CONFIG_KEYBOARD_HV2605_KEYBOARD=m
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_GT801=m
+CONFIG_TOUCHSCREEN_GT811=m
+CONFIG_TOUCHSCREEN_GT818=m
+CONFIG_TOUCHSCREEN_FT5X_TS=m
+CONFIG_TOUCHSCREEN_ZT8031=m
+CONFIG_GSENSOR=y
+CONFIG_SENSORS_BMA250=m
+CONFIG_MEMSIC_ECOMPASS=m
+CONFIG_SENSORS_MXC622X=m
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=8
+CONFIG_SERIAL_8250_RUNTIME_UARTS=8
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_SPI=y
+CONFIG_SPI_DEBUG=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_SUNXI=m
+CONFIG_POWER_SUPPLY=y
+CONFIG_AW_AXP=y
+# CONFIG_HWMON is not set
+CONFIG_REGULATOR=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_VIDEO_DEV=y
+CONFIG_MEDIA_TUNER_CUSTOMISE=y
+# CONFIG_MEDIA_TUNER_SIMPLE is not set
+# CONFIG_MEDIA_TUNER_TDA8290 is not set
+# CONFIG_MEDIA_TUNER_TDA827X is not set
+# CONFIG_MEDIA_TUNER_TDA18271 is not set
+# CONFIG_MEDIA_TUNER_TDA9887 is not set
+# CONFIG_MEDIA_TUNER_TEA5767 is not set
+# CONFIG_MEDIA_TUNER_MT20XX is not set
+# CONFIG_MEDIA_TUNER_MT2060 is not set
+# CONFIG_MEDIA_TUNER_MT2266 is not set
+# CONFIG_MEDIA_TUNER_MT2131 is not set
+# CONFIG_MEDIA_TUNER_QT1010 is not set
+# CONFIG_MEDIA_TUNER_MXL5005S is not set
+# CONFIG_MEDIA_TUNER_MXL5007T is not set
+# CONFIG_MEDIA_TUNER_MC44S803 is not set
+# CONFIG_MEDIA_TUNER_MAX2165 is not set
+# CONFIG_MEDIA_TUNER_TDA18218 is not set
+# CONFIG_MEDIA_TUNER_TDA18212 is not set
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_M5602=m
+CONFIG_USB_STV06XX=m
+CONFIG_USB_GL860=m
+CONFIG_USB_GSPCA_BENQ=m
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_CPIA1=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+CONFIG_USB_GSPCA_JEILINJ=m
+CONFIG_USB_GSPCA_JL2005BCD=m
+CONFIG_USB_GSPCA_KINECT=m
+CONFIG_USB_GSPCA_KONICA=m
+CONFIG_USB_GSPCA_MARS=m
+CONFIG_USB_GSPCA_MR97310A=m
+CONFIG_USB_GSPCA_NW80X=m
+CONFIG_USB_GSPCA_OV519=m
+CONFIG_USB_GSPCA_OV534=m
+CONFIG_USB_GSPCA_OV534_9=m
+CONFIG_USB_GSPCA_PAC207=m
+CONFIG_USB_GSPCA_PAC7302=m
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SE401=m
+CONFIG_USB_GSPCA_SN9C2028=m
+CONFIG_USB_GSPCA_SN9C20X=m
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_SPCA1528=m
+CONFIG_USB_GSPCA_SQ905=m
+CONFIG_USB_GSPCA_SQ905C=m
+CONFIG_USB_GSPCA_SQ930X=m
+CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_STV0680=m
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TOPRO=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_VICAM=m
+CONFIG_USB_GSPCA_XIRLINK_CIT=m
+CONFIG_USB_GSPCA_ZC3XX=m
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_HDPVR=m
+CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_EM28XX_ALSA=m
+CONFIG_VIDEO_CX231XX=m
+CONFIG_VIDEO_CX231XX_ALSA=m
+CONFIG_VIDEO_TM6000=m
+CONFIG_VIDEO_TM6000_ALSA=m
+CONFIG_VIDEO_USBVISION=m
+CONFIG_USB_ET61X251=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_PWC=m
+CONFIG_VIDEO_CPIA2=m
+CONFIG_USB_ZR364XX=m
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_IMX074=m
+CONFIG_SOC_CAMERA_MT9M001=m
+CONFIG_SOC_CAMERA_MT9M111=m
+CONFIG_SOC_CAMERA_MT9T031=m
+CONFIG_SOC_CAMERA_MT9T112=m
+CONFIG_SOC_CAMERA_MT9V022=m
+CONFIG_SOC_CAMERA_RJ54N1=m
+CONFIG_SOC_CAMERA_TW9910=m
+CONFIG_SOC_CAMERA_PLATFORM=m
+CONFIG_SOC_CAMERA_OV2640=m
+CONFIG_SOC_CAMERA_OV5642=m
+CONFIG_SOC_CAMERA_OV6650=m
+CONFIG_SOC_CAMERA_OV772X=m
+CONFIG_SOC_CAMERA_OV9640=m
+CONFIG_SOC_CAMERA_OV9740=m
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+# CONFIG_VIDEO_CSI_SUN4I is not set
+CONFIG_RADIO_SI470X=y
+CONFIG_USB_SI470X=m
+CONFIG_I2C_SI470X=m
+CONFIG_USB_MR800=m
+CONFIG_USB_DSBR=m
+CONFIG_RADIO_SI4713=m
+CONFIG_USB_KEENE=m
+CONFIG_RADIO_TEA5764=m
+CONFIG_RADIO_SAA7706H=m
+CONFIG_RADIO_TEF6862=m
+CONFIG_RADIO_WL1273=m
+CONFIG_AUDIO_ENGINE=y
+CONFIG_PA_CONTROL=y
+CONFIG_DRM=m
+CONFIG_DRM_MALI=m
+CONFIG_DRM_UDL=m
+CONFIG_MALI=m
+CONFIG_MALI400_DEBUG=y
+CONFIG_MALI400_GPU_UTILIZATION=y
+CONFIG_FB=y
+CONFIG_FB_SUNXI=y
+CONFIG_FB_SUNXI_LCD=y
+CONFIG_FB_SUNXI_HDMI=y
+CONFIG_HDMI_CEC=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=m
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_ALOOP=m
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_SOC=y
+CONFIG_SND_SUNXI_SOC_SPDIF=y
+CONFIG_HIDRAW=y
+CONFIG_UHID=y
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
+CONFIG_HID_KYE=y
+CONFIG_HID_LOGITECH_DJ=y
+CONFIG_LOGITECH_FF=y
+# CONFIG_LOGIWHEELS_FF is not set
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_REALTEK=y
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+CONFIG_USB_STORAGE_ONETOUCH=y
+CONFIG_USB_STORAGE_KARMA=y
+CONFIG_USB_STORAGE_CYPRESS_ATACB=y
+CONFIG_USB_STORAGE_ENE_UB6250=y
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_CONSOLE=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_GADGET=y
+CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_FILE_STORAGE_TEST=y
+CONFIG_MMC=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+CONFIG_MMC_USHC=y
+CONFIG_MMC_SUNXI_POWER_CONTROL=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_SUNXI=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_SUN4I=y
+CONFIG_STAGING=y
+CONFIG_ANDROID=y
+CONFIG_ANDROID_BINDER_IPC=y
+CONFIG_ANDROID_LOGGER=y
+CONFIG_ANDROID_RAM_CONSOLE=y
+CONFIG_ANDROID_LOW_MEMORY_KILLER=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_REISERFS_FS=y
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QFMT_V2=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=y
+CONFIG_CUSE=y
+CONFIG_FSCACHE=y
+CONFIG_FSCACHE_STATS=y
+CONFIG_CACHEFILES=y
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+CONFIG_NTFS_FS=y
+CONFIG_NTFS_RW=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_HFS_FS=y
+CONFIG_HFSPLUS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_V4_1=y
+CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="y"
+CONFIG_ROOT_NFS=y
+CONFIG_NFS_USE_LEGACY_DNS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_FAULT_INJECTION=y
+CONFIG_CIFS=y
+CONFIG_CIFS_DFS_UPCALL=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_CODEPAGE_950=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_CODEPAGE_949=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_PRINTK_TIME=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_FRAME_WARN=2048
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_SECTION_MISMATCH=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_LIST=y
+CONFIG_BOOT_PRINTK_DELAY=y
+CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
+# CONFIG_FTRACE is not set
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_STRICT_DEVMEM=y
+CONFIG_DEBUG_LL=y
+CONFIG_SECURITYFS=y
+# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_SEQIV=y
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ZLIB=y
+CONFIG_CRYPTO_LZO=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_LIBCRC32C=y

board/cubietech/cubieboard/mkcubiecard.sh

@@ -0,0 +1,124 @@
+#! /bin/sh
+# mkCubieCard.sh v0.1:
+# 2013, Carlo Caione <carlo.caione@gmail.com>
+# heavely based on :
+# mkA10card.sh v0.1
+# 2012, Jason Plum <jplum@archlinuxarm.org>
+# loosely based on :
+# mkcard.sh v0.5
+# (c) Copyright 2009 Graeme Gregory <dp@xora.org.uk>
+# Licensed under terms of GPLv2
+#
+# Parts of the procudure base on the work of Denys Dmytriyenko
+# http://wiki.omap.com/index.php/MMC_Boot_Format
+
+IMAGES_DIR=$1
+SPL_IMG=$IMAGES_DIR/sunxi-spl.bin
+SPL_UBOOT=$IMAGES_DIR/u-boot-sunxi-with-spl.bin
+UBOOT_IMG=$IMAGES_DIR/u-boot.bin
+UIMAGE=$IMAGES_DIR/uImage
+BIN_BOARD_FILE=$IMAGES_DIR/script.bin
+ROOTFS=$IMAGES_DIR/rootfs.tar
+BOOT_CMD_H=$IMAGES_DIR/boot.scr
+
+export LC_ALL=C
+
+if [ $# -ne 2 ]; then
+	echo "Usage: $0 <images_dir> <drive>"
+	exit 1;
+fi
+
+if [ `id -u` -ne 0 ]; then
+	echo "This script must be run as root" 1>&2
+	exit 1
+fi
+
+if [ ! -f $SPL_IMG  -a ! -f $SPL_UBOOT ] ||
+   [ ! -f $UBOOT_IMG ] ||
+   [ ! -f $UIMAGE ] ||
+   [ ! -f $BIN_BOARD_FILE ] ||
+   [ ! -f $ROOTFS ] ||
+   [ ! -f $BOOT_CMD_H ]; then
+	echo "File(s) missing."
+	exit 1
+fi
+
+DRIVE=$2
+P1=`mktemp -d`
+P2=`mktemp -d`
+
+dd if=/dev/zero of=$DRIVE bs=1M count=3
+
+SIZE=`fdisk -l $DRIVE | grep Disk | grep bytes | awk '{print $5}'`
+
+echo DISK SIZE - $SIZE bytes
+
+
+# ~2048, 16MB, FAT, bootable
+# ~rest of drive, Ext4
+{
+echo 32,512,0x0C,*
+echo 544,,,-
+} | sfdisk -D $DRIVE
+
+sleep 1
+
+if [ -b ${DRIVE}1 ]; then
+	D1=${DRIVE}1
+	umount ${DRIVE}1
+	mkfs.vfat -n "boot" ${DRIVE}1
+else
+	if [ -b ${DRIVE}p1 ]; then
+		D1=${DRIVE}p1
+		umount ${DRIVE}p1
+		mkfs.vfat -n "boot" ${DRIVE}p1
+	else
+		echo "Cant find boot partition in /dev"
+		exit 1
+	fi
+fi
+
+
+if [ -b ${DRIVE}2 ]; then
+	D2=${DRIVE}2
+	umount ${DRIVE}2
+	mkfs.ext4 -L "Cubie" ${DRIVE}2
+else
+	if [ -b ${DRIVE}p2 ]; then
+		D2=${DRIVE}p2
+		umount ${DRIVE}p2
+		mkfs.ext4 -L "Cubie" ${DRIVE}p2
+	else
+		echo "Cant find rootfs partition in /dev"
+		exit 1
+	fi
+fi
+
+mount $D1 $P1
+mount $D2 $P2
+
+# write uImage
+cp $UIMAGE $P1
+# write board file
+cp $BIN_BOARD_FILE $P1
+# write u-boot script
+cp $BOOT_CMD_H $P1
+# write rootfs
+tar -C $P2 -xvf $ROOTFS
+
+sync
+
+umount $D1
+umount $D2
+
+rm -fr $P1
+rm -fr $P2
+
+if [ -e $SPL_UBOOT ]; then
+	dd if=$SPL_UBOOT of=$DRIVE bs=1024 seek=8
+else
+	# write SPL
+	dd if=$SPL_IMG of=$DRIVE bs=1024 seek=8
+	# write mele u-boot
+	dd if=$UBOOT_IMG of=$DRIVE bs=1024 seek=32
+fi

board/cubietech/cubieboard/post-build.sh

@@ -0,0 +1,14 @@
+#!/bin/sh
+# post-build.sh for CubieBoard
+# 2013, Carlo Caione <carlo.caione@gmail.com>
+
+BOARD_DIR="$(dirname $0)"
+MKIMAGE=$HOST_DIR/usr/bin/mkimage
+BOOT_CMD=$BOARD_DIR/boot.cmd
+BOOT_CMD_H=$BINARIES_DIR/boot.scr
+
+# U-Boot script
+if [ -e $MKIMAGE -a -e $BOOT_CMD ];
+then
+	$MKIMAGE -C none -A arm -T script -d $BOOT_CMD $BOOT_CMD_H
+fi

board/cubietech/cubieboard/readme.txt

@@ -0,0 +1,62 @@
+cubieboard and cubieboard2
+
+-----
+Intro
+-----
+
+To be able to use your cubieboard board with the images generated by
+Buildroot you have to correctly setup the SD card.
+
+For more information, please see http://linux-sunxi.org/FirstSteps
+
+---------------
+How to build it
+---------------
+
+You need to use the cubieboard_defconfig or cubieboard2_defconfig, to do so:
+ * make cubieboard_defconfig
+or
+ * make cubieboard2_defconfig
+
+And to compile:
+ * make
+
+-----------------
+What is generated
+-----------------
+
+After building, you should obtain this tree:
+
+    output/images/
+    +-- rootfs.tar
+    +-- boot.scr
+    +-- script.bin
+    +-- sunxi-spl.bin
+    +-- u-boot.bin
+    +-- u-boot-sunxi-with-spl.bin (optional)
+    `-- uImage
+
+--------------------------
+How setting up the SD card
+--------------------------
+
+Depending on the rootfs size, you might want to use a 2GB or larger SD-card.
+The script mkcubiecard.sh will take care of partitioning and formatting
+the SD-card.
+
+BEWARE! This process will erase your SD card.
+
+Use dmesg to find out where the SD card is attached in the /dev tree
+(<device>) and then:
+
+# sudo ./mkcubiecard.sh <images_dir> <device>
+
+where:
+ - <images_dir> is the directory containing the generated files (usually
+   output/images)
+ - <device> is the device file of the SD card (usually /dev/sdX)
+
+
+
+--
+Carlo Caione <carlo.caione@gmail.com>

board/cubietech/cubieboard2/post-build.sh

@@ -0,0 +1,11 @@
+#!/bin/sh
+# post-build.sh for Cubieboard2
+# 2013, Carlo Caione <carlo.caione@gmail.com>
+
+BOARD_DIR="$(dirname $0)"
+MKIMAGE=$HOST_DIR/usr/bin/mkimage
+BOOT_CMD=$BOARD_DIR/boot.cmd
+BOOT_CMD_H=$BINARIES_DIR/boot.scr
+
+# U-Boot script
+$MKIMAGE -C none -A arm -T script -d $BOOT_CMD $BOOT_CMD_H

board/digilent/zybo/genimage.cfg

@@ -1,29 +0,0 @@
-image boot.vfat {
-  vfat {
-    files = {
-      "BOOT.BIN",
-      "uEnv.txt",
-      "system.bit",
-      "zynq-zybo.dtb",
-      "u-boot-dtb.img",
-      "uImage"
-    }
-  }
-  size = 32M
-}
-
-image sdcard.img {
-  hdimage {
-  }
-
-  partition boot {
-    partition-type = 0xC
-    bootable = "true"
-    image = "boot.vfat"
-  }
-
-  partition rootfs {
-    partition-type = 0x83
-    image = "rootfs.ext4"
-  }
-}

board/digilent/zybo/post-image.sh

@@ -1,18 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname $0)"
-GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
-GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
-OUTPUT_DIR="${O}/images"
-
-rm -rf "${GENIMAGE_TMP}"
-
-cp board/digilent/zybo/uEnv.txt ${BINARIES_DIR}
-cp board/digilent/zybo/system.bit ${BINARIES_DIR}
-
-genimage                               \
-	--rootpath "${TARGET_DIR}"     \
-	--tmppath "${GENIMAGE_TMP}"    \
-	--inputpath "${BINARIES_DIR}"  \
-	--outputpath "${BINARIES_DIR}" \
-	--config "${GENIMAGE_CFG}"