buildroot: fix version for 2009.02

.gitignore

@@ -1,15 +0,0 @@
-/output
-/dl
-/.auto.deps
-/.config.cmd
-/.config.old
-/..config.tmp
-/.config
-*.depend
-*.o
-/*.patch
-/*.diff
-*.orig
-*.rej
-*~
-*.pyc

COPYING

@@ -1,339 +0,0 @@
-		    GNU GENERAL PUBLIC LICENSE
-		       Version 2, June 1991
-
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
- 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-			    Preamble
-
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users.  This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it.  (Some other Free Software Foundation software is covered by
-the GNU Lesser General Public License instead.)  You can apply it to
-your programs, too.
-
-  When we speak of free software, we are referring to freedom, not
-price.  Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
-  To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
-  For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have.  You must make sure that they, too, receive or can get the
-source code.  And you must show them these terms so they know their
-rights.
-
-  We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
-  Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software.  If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
-  Finally, any free program is threatened constantly by software
-patents.  We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary.  To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.
-
-		    GNU GENERAL PUBLIC LICENSE
-   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
-  0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License.  The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language.  (Hereinafter, translation is included without limitation in
-the term "modification".)  Each licensee is addressed as "you".
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope.  The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
-  1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
-  2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
-    a) You must cause the modified files to carry prominent notices
-    stating that you changed the files and the date of any change.
-
-    b) You must cause any work that you distribute or publish, that in
-    whole or in part contains or is derived from the Program or any
-    part thereof, to be licensed as a whole at no charge to all third
-    parties under the terms of this License.
-
-    c) If the modified program normally reads commands interactively
-    when run, you must cause it, when started running for such
-    interactive use in the most ordinary way, to print or display an
-    announcement including an appropriate copyright notice and a
-    notice that there is no warranty (or else, saying that you provide
-    a warranty) and that users may redistribute the program under
-    these conditions, and telling the user how to view a copy of this
-    License.  (Exception: if the Program itself is interactive but
-    does not normally print such an announcement, your work based on
-    the Program is not required to print an announcement.)
-
-These requirements apply to the modified work as a whole.  If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works.  But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
-  3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
-    a) Accompany it with the complete corresponding machine-readable
-    source code, which must be distributed under the terms of Sections
-    1 and 2 above on a medium customarily used for software interchange; or,
-
-    b) Accompany it with a written offer, valid for at least three
-    years, to give any third party, for a charge no more than your
-    cost of physically performing source distribution, a complete
-    machine-readable copy of the corresponding source code, to be
-    distributed under the terms of Sections 1 and 2 above on a medium
-    customarily used for software interchange; or,
-
-    c) Accompany it with the information you received as to the offer
-    to distribute corresponding source code.  (This alternative is
-    allowed only for noncommercial distribution and only if you
-    received the program in object code or executable form with such
-    an offer, in accord with Subsection b above.)
-
-The source code for a work means the preferred form of the work for
-making modifications to it.  For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable.  However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
-  4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License.  Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
-  5. You are not required to accept this License, since you have not
-signed it.  However, nothing else grants you permission to modify or
-distribute the Program or its derivative works.  These actions are
-prohibited by law if you do not accept this License.  Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
-  6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions.  You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
-  7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all.  For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices.  Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
-  8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded.  In such case, this License incorporates
-the limitation as if written in the body of this License.
-
-  9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time.  Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number.  If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation.  If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
-  10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission.  For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this.  Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
-			    NO WARRANTY
-
-  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
-  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-
-		     END OF TERMS AND CONDITIONS
-
-	    How to Apply These Terms to Your New Programs
-
-  If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
-  To do so, attach the following notices to the program.  It is safest
-to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the program's name and a brief idea of what it does.>
-    Copyright (C) <year>  <name of author>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License along
-    with this program; if not, write to the Free Software Foundation, Inc.,
-    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-
-Also add information on how to contact you by electronic and paper mail.
-
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
-
-    Gnomovision version 69, Copyright (C) year name of author
-    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
-    This is free software, and you are welcome to redistribute it
-    under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License.  Of course, the commands you use may
-be called something other than `show w' and `show c'; they could even be
-mouse-clicks or menu items--whatever suits your program.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the program, if
-necessary.  Here is a sample; alter the names:
-
-  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
-  `Gnomovision' (which makes passes at compilers) written by James Hacker.
-
-  <signature of Ty Coon>, 1 April 1989
-  Ty Coon, President of Vice
-
-This General Public License does not permit incorporating your program into
-proprietary programs.  If your program is a subroutine library, you may
-consider it more useful to permit linking proprietary applications with the
-library.  If this is what you want to do, use the GNU Lesser General
-Public License instead of this License.

Config.in

@@ -1,6 +1,6 @@
 #
 
-mainmenu "Buildroot $BR2_VERSION Configuration"
+mainmenu "Buildroot2 Configuration"
 
 config BR2_HAVE_DOT_CONFIG
 	bool
@@ -8,55 +8,28 @@ config BR2_HAVE_DOT_CONFIG
 
 config BR2_VERSION
 	string
-	option env="BR2_VERSION_FULL"
+	default "2009.02"
 
-config BR2_HOSTARCH
-	string
-	option env="HOSTARCH"
-
-# Hidden boolean selected by pre-built packages for x86, when they
-# need to run on x86-64 machines (example: pre-built external
-# toolchains, binary tools like SAM-BA, etc.).
-config BR2_HOSTARCH_NEEDS_IA32_LIBS
-	bool
-
-source "arch/Config.in"
+source "target/Config.in.arch"
+source "target/device/Config.in"
 
 menu "Build options"
 
-menu "Commands"
-
 config BR2_WGET
 	string "Wget command"
-	default "wget --passive-ftp -nd -t 3"
+	default "wget --passive-ftp -nd"
 
-config BR2_SVN
-	string "Subversion (svn) command"
-	default "svn"
+config BR2_SVN_CO
+	string "Subversion (svn) command to download source tree"
+	default "svn co"
 
-config BR2_BZR
-	string "Bazaar (bzr) command"
-	default "bzr"
+config BR2_SVN_UP
+	string "Subversion (svn) command to update source tree"
+	default "svn up"
 
 config BR2_GIT
-	string "Git command"
-	default "git"
-
-config BR2_LOCALFILES
-	string "Local files retrieval command"
-	default "cp"
-
-config BR2_SCP
-	string "Secure copy (scp) command"
-	default "scp"
-
-config BR2_SSH
-	string "Secure shell (ssh) command"
-	default "ssh"
-
-config BR2_HG
-	string "Mercurial (hg) command"
-	default "hg"
+	string "Git command to download source tree"
+	default "git clone"
 
 config BR2_ZCAT
 	string "zcat command"
@@ -78,13 +51,6 @@ config BR2_BZCAT
 	  Default is "bzcat"
 	  Other possible values include "bunzip2 -c" or "bzip2 -d -c".
 
-config BR2_XZCAT
-	string "xzcat command"
-	default "xzcat"
-	help
-	  Command to be used to extract a xz'ed file to stdout.
-	  Default is "xzcat"
-
 config BR2_TAR_OPTIONS
 	string "Tar options"
 	default ""
@@ -93,162 +59,135 @@ config BR2_TAR_OPTIONS
 	  E.g. " -v --exclude='*.svn*'" to exclude all .svn internal files
 	  and to be verbose.
 
-endmenu
-
-config BR2_DEFCONFIG_FROM_ENV
-	string
-	option env="BR2_DEFCONFIG"
-
-config BR2_DEFCONFIG
-	string "Location to save buildroot config"
-	default BR2_DEFCONFIG_FROM_ENV if BR2_DEFCONFIG_FROM_ENV != ""
-	default "$(CONFIG_DIR)/defconfig"
-	help
-	  When running 'make savedefconfig', the defconfig file will be saved
-	  in this location.
-
 config BR2_DL_DIR
 	string "Download dir"
-	default "$(TOPDIR)/dl"
+	default "$(BASE_DIR)/dl"
 	help
 	  Directory to store all the source files that we need to fetch.
 	  If the Linux shell environment has defined the BUILDROOT_DL_DIR
 	  environment variable, then this overrides this configuration item.
 
-	  The default is $(TOPDIR)/dl
+	  The default is $(BASE_DIR)/dl
 
-config BR2_HOST_DIR
-	string "Host dir"
-	default "$(BASE_DIR)/host"
-	help
-	  Directory to store all the binary files that are built for the host.
-	  This includes the cross compilation toolchain when building the
-	  internal buildroot toolchain.
-
-	  The default is $(BASE_DIR)/host
-
-menu "Mirrors and Download locations"
-
-config BR2_PRIMARY_SITE
-	string "Primary download site"
+config BR2_COPYTO
+	string "Copy result to..."
 	default ""
 	help
-	  Primary site to download from. If this option is set then buildroot
-	  will try to download package source first from this site and try the
-	  default if the file is not found.
-	  Valid URIs are URIs recognized by $(WGET) and scp URIs of the form
-	  scp://[user@]host:path.
-	  NOTE: This works for all packages using the central package
-	  infrastructure (generic, autotools, cmake, ...)
+	  Setting this variable will (eventually) override 
+	  any other copyto configurations in buildroot.
 
-config BR2_PRIMARY_SITE_ONLY
-	bool "Only allow downloads from primary download site"
-	depends on BR2_PRIMARY_SITE != ""
+source	"target/device/Config.in.mirrors"
+
+config BR2_STAGING_DIR
+	string "Toolchain and header file location?"
+	default "$(BUILD_DIR)/staging_dir"
 	help
-	  If this option is enabled, downloads will only be attempted
-	  from the primary download site. Other locations, like the
-	  package's official download location or the backup download
-	  site, will not be considered. Therefore, if the package is
-	  not present on the primary site, the download fails.
+	  This is the location where the toolchain will be installed.  The
+	  toolchain will not work if it is moved from this location.
+	  Therefore, if you wish to package up a uClibc toolchain, it is
+	  important that is is set to the final location where the toolchain
+	  will be used.
 
-	  This is useful for project developers who want to ensure
-	  that the project can be built even if the upstream tarball
-	  locations disappear.
+	  Most people will leave this set to the default value of
+	  "$(BUILD_DIR)/staging_dir".
 
-if !BR2_PRIMARY_SITE_ONLY
-
-config BR2_BACKUP_SITE
-	string "Backup download site"
-	default "http://sources.buildroot.net/"
+config BR2_FPU_SUFFIX
+	bool "Add '_nofpu' suffix for softfloat toolchains"
 	help
-	  Backup site to download from. If this option is set then buildroot
-	  will fall back to download package sources from here if the
-	  normal location fails.
+	  If the toolchain is configured to use softfloat, then
+	  the "_nofpu" suffix will be added to the toolchain build
+	  directory name and to any rootfs image name
 
-config BR2_KERNEL_MIRROR
-	string "Kernel.org mirror"
-	default "http://www.kernel.org/pub/"
+config BR2_TOPDIR_PREFIX
+	string "Custom build dir prefix"
+	default ""
 	help
-	  kernel.org is mirrored on a number of servers around the world.
-	  The following allows you to select your preferred mirror.
+	  Add a custom string to the beginning of the build directories.
 
-	  Have a look on the kernel.org site for a list of mirrors, then enter
-	  the URL to the base directory.  Examples:
+	  build_ARCH -> [PREFIX]_build_ARCH
+	  toolchain_build_ARCH -> [PREFIX]_toolchain_build_ARCH
 
-	     http://www.XX.kernel.org/pub (XX = country code)
-	     http://mirror.aarnet.edu.au/pub/ftp.kernel.org
-
-config BR2_GNU_MIRROR
-	string "GNU Software mirror"
-	default "http://ftp.gnu.org/pub/gnu"
+config BR2_TOPDIR_SUFFIX
+	string "Custom build dir suffix"
+	default ""
 	help
-	  GNU has multiple software mirrors scattered around the world.
-	  The following allows you to select your preferred mirror.
+	  Add a custom string to the end of the build directories.
 
-	  Have a look on the gnu.org site for a list of mirrors, then enter
-	  the URL to the base directory.  Examples:
+	  build_ARCH -> build_ARCH_[SUFFIX]
+	  toolchain_build_ARCH -> toolchain_build_ARCH_[SUFFIX]
 
-	     http://ftp.gnu.org/pub/gnu
-	     http://mirror.aarnet.edu.au/pub/gnu
-
-config BR2_DEBIAN_MIRROR
-	string "Debian Software mirror"
-	default "http://ftp.debian.org"
+config BR2_GNU_BUILD_SUFFIX
+	string "GNU build hostname suffix"
+	default "pc-linux-gnu"
 	help
-	  Debian has multiple software mirrors scattered around the world.
-	  The following allows you to select your preferred mirror.
+	  The string used to pass to configure scripts via the
+	  --build= option.  Just specify the suffix here, the leading
+	  arch will be filled in automatically.
 
-	  Usually, just add your country code like XX here:
-	  http://ftp.XX.debian.org
+	  Here's some copy and paste build host options for you:
+	      linux:   pc-linux-gnu
+	      cygwin:  pc-cygwin
+	      os x:    apple-darwin7 / apple-darwin8
 
-endif
+config BR2_GNU_TARGET_SUFFIX
+	string "GNU target suffix"
+	default "linux-uclibcgnueabi" if BR2_ARM_EABI
+	default "linux-uclibc"
+	help
+	  The string used to pass to configure scripts via the
+	  --target= option.  Just specify the suffix here, the leading
+	  arch will be filled in automatically.
 
-endmenu
+	  Most users will want to stick with the default setting, though
+	  other users (most notably ARM EABI) like to add on to this in
+	  order to stay in line with gcc conventions.
+
+	  Default options are:
+	      linux-uclibcgnueabi for ARM EABI
+	      linux-uclibc for the rest
+	      gnuhurd-uclibc for the hurd
 
 config BR2_JLEVEL
-	int "Number of jobs to run simultaneously (0 for auto)"
-	default "0"
+	int "Number of jobs to run simultaneously"
+	default "1"
 	help
-	  Number of jobs to run simultaneously.  If 0, determine
-	  automatically according to number of CPUs on the host
-	  system.
+	  Number of jobs to run simultaneously
 
-config BR2_CCACHE
-	bool "Enable compiler cache"
+config BR2_PREFER_IMA
+	bool "prefer IMA compiles"
 	help
-	  This option will enable the use of ccache, a compiler
-	  cache. It will cache the result of previous builds to speed
-	  up future builds. The cache is stored in
-	  $HOME/.buildroot-ccache.
+	  Where possible, compile package with Inter Module Analysis.
+	  This potentially uses alot of system resources on your compile
+	  host with the benefit of creating smaller binaries for the target.
 
-	  Note that Buildroot does not try to invalidate the cache
-	  contents when the compiler changes in an incompatible
-	  way. Therefore, if you make a change to the compiler version
-	  and/or configuration, you are responsible for purging the
-	  ccache cache by removing the $HOME/.buildroot-ccache
-	  directory.
+	  If unsure, say No.
 
-config BR2_CCACHE_DIR
-	string "Compiler cache location"
-	depends on BR2_CCACHE
-	default "$(HOME)/.buildroot-ccache"
-	help
-	  Where ccache should store cached files.
+	  WARNING: This is highly experimental at the moment.
 
 config BR2_DEPRECATED
 	bool "Show packages that are deprecated or obsolete"
 	help
 	  This option hides outdated/obsolete versions of packages.
 
+config BR2_RECENT
+	bool "Show packages that are of the latest major version"
+	default y
+	help
+	  This option show recent versions of packages.
+
+config BR2_CONFIG_CACHE
+	bool "Use a central configure cache file"
+	help
+	  This determines if a central config cache is used by
+	  packages, reducing the configure time for packages as each
+	  one caches its findings.
+
 config BR2_ENABLE_DEBUG
 	bool "build packages with debugging symbols"
+	select BR2_PACKAGE_GDB_SERVER
 	help
-	  Build packages with debugging symbols enabled. All libraries
-	  and binaries in the 'staging' directory will have debugging
-	  symbols, which allows remote debugging even if libraries and
-	  binaries are stripped on the target. Whether libraries and
-	  binaries are stripped on the target is controlled by the
-	  BR2_STRIP_* options below.
+	  Build packages with debugging symbols
+	  enabled
 
 if BR2_ENABLE_DEBUG
 choice
@@ -281,57 +220,34 @@ endchoice
 endif
 
 choice
-	prompt "strip command for binaries on target"
+	prompt "strip"
 	default BR2_STRIP_strip
+	help
+	  Select whether to strip binaries and libraries for the target
+	  or not.
+	  strip   is the normal strip command
+	  sstrip  is a strip that discards more than the normal strip
+	  none    do not strip (only for debugging!)
 
 config BR2_STRIP_strip
 	bool "strip"
-	depends on !BR2_ELF2FLT
+	depends on !BR2_ENABLE_DEBUG && !BR2_ELF2FLT
 	help
-	  Binaries and libraries in the target filesystem will be
-	  stripped using the normal 'strip' command. This allows to
-	  save space, mainly by removing debugging symbols. Debugging
-	  symbols on the target are needed for native debugging, but
-	  not when remote debugging is used.
+	  strip   is the normal strip command
 
 config BR2_STRIP_sstrip
 	bool "sstrip"
 	select BR2_PACKAGE_SSTRIP_HOST
-	depends on !BR2_ELF2FLT
+	depends on !BR2_ENABLE_DEBUG && !BR2_ELF2FLT
 	help
-	  Binaries and libraries in the target filesystem will be
-	  stripped using the 'sstrip' command, which strips a little
-	  bit more than the traditional 'strip' command. This allows to
-	  save space, mainly by removing debugging symbols. Debugging
-	  symbols on the target are needed for native debugging, but
-	  not when remote debugging is used.
+	  sstrip  is a strip that discards more than the normal strip
 
 config BR2_STRIP_none
 	bool "none"
 	help
-	  Do not strip binaries and libraries in the target
-	  filesystem.
+	  none    do not strip (only for debugging!)
 endchoice
 
-config BR2_STRIP_EXCLUDE_FILES
-	string "executables that should not be stripped"
-	depends on !BR2_STRIP_none
-	default ""
-	help
-	  You may specify a space-separated list of binaries and libraries
-	  here that should not be stripped on the target.
-
-config BR2_STRIP_EXCLUDE_DIRS
-	string "directories that should be skipped when stripping"
-	depends on !BR2_STRIP_none
-	default ""
-	help
-	  You may specify a space-separated list of directories that should
-	  be skipped when stripping. Binaries and libraries in these
-	  directories will not be touched.
-	  The directories should be specified relative to the target directory,
-	  without leading slash.
-
 choice
 	prompt "gcc optimization level"
 	default BR2_OPTIMIZE_S
@@ -340,11 +256,13 @@ choice
 
 config BR2_OPTIMIZE_0
 	bool "optimization level 0"
+	depends on !BR2_PACKAGE_LINUX
 	help
 	  Do not optimize. This is the default.
 
 config BR2_OPTIMIZE_1
 	bool "optimization level 1"
+	depends on !BR2_PACKAGE_LINUX
 	help
 	  Optimize. Optimizing compilation takes somewhat more time,
 	  and a lot more memory for a large function. With -O, the
@@ -409,63 +327,39 @@ config BR2_PREFER_STATIC_LIB
 
 	  WARNING: This is highly experimental at the moment.
 
+config BR2_HAVE_MANPAGES
+	bool "manpages on the target"
+	help
+	  Leave the manpages on the target.
+	  If you say n here, your target will not contain any
+	  manpage.
+
+config BR2_HAVE_INFOPAGES
+	bool "infopages on the target"
+	help
+	  Leave the infopages on the target.
+	  If you say n here, your target will not contain any
+	  infopage.
+
 config BR2_HAVE_DOCUMENTATION
 	bool "documentation on the target"
-	# We no longer want to support a toolchain on the target
-	depends on BR2_DEPRECATED
 	help
-	  Install the documentation, including manual pages and info
-	  pages, on the target.
+	  Leave the documentation on the target.
 	  If you say n here, your target will not contain any
 	  documentation.
 
 config BR2_HAVE_DEVFILES
 	bool "development files in target filesystem"
-	# We no longer want to support a toolchain on the target
-	depends on BR2_DEPRECATED
 	help
 	  Install headers and static libraries in the
 	  target filesystem
 
-config BR2_PACKAGE_OVERRIDE_FILE
-	string "location of a package override file"
-	default "$(TOPDIR)/local.mk"
-	help
-	  A package override file is a short makefile that contains
-	  variable definitions of the form <pkg>_OVERRIDE_SRCDIR,
-	  which allows to tell Buildroot to use an existing directory
-	  as the source directory for a particular package. See the
-	  Buildroot documentation for more details on this feature.
-
-config BR2_GLOBAL_PATCH_DIR
-	string "global patch directory"
-	help
-	  You may specify a directory containing global package patches.
-	  For a specific version <packageversion> of a specific package
-	  <packagename>, patches are applied as follows.
-
-	  First, the default Buildroot patch set for the package is applied.
-
-	  If the directory $(BR2_GLOBAL_PATCH_DIR)/<packagename>/<packageversion>
-	  exists, then all *.patch files in the directory will be applied.
-
-	  Otherwise, if the directory $(BR2_GLOBAL_PATCH_DIR)/<packagename> exists,
-	  then all *.patch files in the directory will be applied.
+source package/gnuconfig/Config.in
 
 endmenu
 
 source "toolchain/Config.in"
 
-source "system/Config.in"
-
 source "package/Config.in"
 
-source "package/Config.in.host"
-
-source "fs/Config.in"
-
-source "boot/Config.in"
-
-source "linux/Config.in"
-
-source "Config.in.legacy"
+source "target/Config.in"

Config.in.legacy

@@ -1,185 +0,0 @@
-#
-# Config.in.legacy - support for backward compatibility
-#
-# When an existing Config.in symbol is removed, it should be added again in this
-# file, and take appropriate action to approximate backward compatibility. If
-# there is an equivalent (set of) new symbols, these can just be select'ed by
-# the old symbol. This makes sure that running 'make oldconfig' will make things
-# "just work" when upgrading to a new buildroot version. If the change is too
-# fundamental and cannot be fixed by a simple select, then the old symbol should
-# select BR2_LEGACY.  If that symbol is set, the build will issue an error.
-#
-# When adding legacy symbols to this file, add them to the front. The oldest
-# symbols will be removed again after about two years.
-#
-# The symbol should be copied as-is from the place where it was previously
-# defined, but the help text should be removed or replaced with something that
-# explains how to fix it.
-
-config BR2_LEGACY
-	bool
-	help
-	  This option is selected automatically when your old .config uses an
-	  option that no longer exists in current buildroot. In that case, the
-	  build will fail. Look for config options which are selected in the
-	  menu below: they no longer exist and should be replaced by something
-	  else.
-
-# This comment fits exactly in a 80-column display
-comment "Legacy detected: check the content of the menu below"
-	depends on BR2_LEGACY
-
-menu "Legacy config options"
-
-if BR2_LEGACY
-comment "Your old configuration uses legacy options that no  "
-comment "longer exist in buildroot.                          "
-comment "Please look at the options which have been selected "
-comment "and read their help text.                           "
-comment "As long as these options stay selected, the build   "
-comment "will fail.                                          "
-endif
-
-#
-# Legacy options since 2013.02
-#
-
-config BR2_sa110
-	bool "sa110 ARM target switched to strongarm"
-	select BR2_LEGACY
-	select BR2_strongarm
-	help
-	  The SA110 is the same as a generic StrongARM, it just differs
-	  in speed, peripherals and cache.
-
-config BR2_sa1100
-	bool "sa1100 ARM target switched to strongarm"
-	select BR2_LEGACY
-	select BR2_strongarm
-	help
-	  The SA1100 is the same as a generic StrongARM, it just differs
-	  in speed, peripherals and cache.
-
-config BR2_PACKAGE_GDISK
-	bool "gdisk has been replaced by gptfdisk"
-	select BR2_LEGACY
-	select BR2_PACKAGE_GPTFDISK
-	help
-	  The option has been renamed BR2_PACKAGE_GPTFDISK.
-
-config BR2_PACKAGE_GDISK_GDISK
-	bool "gdisk tool from gdisk has been replaced by gdisk in gptfdisk"
-	select BR2_LEGACY
-	select BR2_PACKAGE_GPTFDISK
-	select BR2_PACKAGE_GPTFDISK_GDISK
-	help
-	  The option has been renamed BR2_PACKAGE_GPTFDISK_GDISK.
-
-config BR2_PACKAGE_GDISK_SGDISK
-	bool "sgdisk tool from gdisk has been replaced by sgdisk in gptfdisk"
-	select BR2_LEGACY
-	select BR2_PACKAGE_GPTFDISK
-	select BR2_PACKAGE_GPTFDISK_SGDISK
-	help
-	  The option has been renamed BR2_PACKAGE_GPTFDISK_SGDISK.
-
-config BR2_PACKAGE_GDB_HOST
-	bool "gdb for the host option has been renamed"
-	select BR2_PACKAGE_HOST_GDB
-	select BR2_LEGACY
-	help
-	  Due to the conversion of gdb to the package infrastructure,
-	  the BR2_PACKAGE_GDB_HOST option has been renamed
-	  BR2_PACKAGE_HOST_GDB.
-
-config BR2_PACKAGE_DIRECTB_DITHER_RGB16
-	bool "DirectFB RGB16 dithering option has been renamed"
-	select BR2_PACKAGE_DIRECTFB_DITHER_RGB16
-	select BR2_LEGACY
-	help
-	  The option has been renamed
-	  BR2_PACKAGE_DIRECTFB_DITHER_RGB16.
-
-config BR2_PACKAGE_DIRECTB_TESTS
-	bool "DirectFB Tests option has been renamed"
-	select BR2_PACKAGE_DIRECTFB_TESTS
-	select BR2_LEGACY
-	help
-	  The option has been renamed
-	  BR2_PACKAGE_DIRECTFB_TESTS.
-
-#
-# Legacy options since 2012.11
-#
-config BR2_PACKAGE_CUSTOMIZE
-	bool "customize package has been removed"
-	select BR2_LEGACY
-	help
-	  The 'customize' special package has been removed. Instead,
-	  we recommend to create either your own packages, or use a
-	  post-build script to customize your root filesystem. See
-	  Buildroot's documentation for more details.
-
-config BR2_PACKAGE_XSERVER_xorg
-	bool "X.org modular server"
-	select BR2_LEGACY
-	select BR2_PACKAGE_XSERVER_XORG_SERVER_MODULAR
-	help
-	  The option has been renamed
-	  BR2_PACKAGE_XSERVER_XORG_SERVER_MODULAR.
-
-config BR2_PACKAGE_XSERVER_tinyx
-	bool "KDrive / TinyX server"
-	select BR2_LEGACY
-	select BR2_PACKAGE_XSERVER_XORG_SERVER_KDRIVE
-	help
-	  The option has been renamed
-	  BR2_PACKAGE_XSERVER_XORG_SERVER_KDRIVE.
-
-config BR2_PACKAGE_PTHREAD_STUBS
-	bool "pthread-stubs option has been renamed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_XLIB_LIBPTHREAD_STUBS
-	depends on BR2_PACKAGE_XORG7
-	help
-	  For consistency reason, the pthread-stubs package has been
-	  renamed to xlib_libpthread-stubs.
-
-
-#
-# Legacy options since 2012.08
-#
-
-config BR2_PACKAGE_GETTEXT_STATIC
-	bool "libgettext.a is now selected by BR2_PREFER_STATIC_LIB"
-	select BR2_LEGACY
-	help
-	  To build a static gettext library, select BR2_PREFER_STATIC_LIB.
-
-
-config BR2_PACKAGE_LIBINTL
-	bool "libintl"
-	select BR2_LEGACY
-	select BR2_PACKAGE_GETTEXT
-	help
-	  libintl is now installed by selecting BR2_PACKAGE_GETTEXT. This now
-	  only installs the library, not the executables.
-
-config BR2_PACKAGE_INPUT_TOOLS_EVTEST
-	bool "input-tools evtest is now a separate package evtest"
-	select BR2_LEGACY
-	select BR2_PACKAGE_EVTEST
-	help
-	  The evtest program from input-tools is now a separate package.
-
-config BR2_BFIN_FDPIC
-	bool "BR2_BFIN_FDPIC is now BR2_BINFMT_FDPIC"
-	select BR2_BINFMT_FDPIC
-	select BR2_LEGACY
-
-config BR2_BFIN_FLAT
-	bool "BR2_BFIN_FLAT is now BR2_BINFMT_FLAT"
-	select BR2_BINFMT_FLAT
-	select BR2_LEGACY
-
-endmenu

Makefile.legacy

@@ -1,30 +0,0 @@
-#
-# Makefile.legacy - support for backward compatibility
-#
-# This file contains placeholders to detect backward-compatibility problems.
-# When a buildroot "API" feature is being deprecated, a rule should be added
-# here that issues an error when the old feature is used.
-#
-# This file is not included if BR2_DEPRECATED is selected, so it is possible
-# to bypass the errors (although that's usually a bad idea).
-
-ifeq ($(BR2_LEGACY),y)
-$(error "You have legacy configuration in your .config! Please check your configuration.")
-endif
-
-#
-# Legacy options from 2012.08
-#
-
-host-pkg-config:
-	@$(call MESSAGE,host-pkg-config is replaced by host-pkgconf)
-	@$(call MESSAGE,please update your .mk files)
-	@false
-.PHONY: host-pkg-config
-
-#
-# Legacy options from 2012.05
-#
-GENTARGETS = $$(error The GENTARGETS macro no longer exists; use $$$$(eval $$$$(generic-package)) or $$$$(eval $$$$(host-generic-package)))
-AUTOTARGETS = $$(error The AUTOTARGETS macro no longer exists; use $$$$(eval $$$$(autotools-package)) or $$$$(eval $$$$(host-autotools-package)))
-CMAKETARGETS = $$(error The CMAKETARGETS macro no longer exists; use $$$$(eval $$$$(cmake-package)) or $$$$(eval $$$$(host-cmake-package)))

TODO

@@ -0,0 +1,14 @@
+Buildroot2 TODOs
+
+- fix packages/Makefile.autotools.in to use a package-imposed patchdir
+  (Ivan Kuten)
+- convert all packages that use autoconf to use the infrastructure of
+  packages/Makefile.autotools.in
+- fix setting of flags for packages
+
+- stabilize for a 0.10.0 release
+
+- think about using a common --config-cache for configure
+  Should take care of expanding TARGET_CONFIGURE_ARGS for cross compiles
+  to working presets.
+

arch/Config.in

@@ -1,305 +0,0 @@
-config BR2_ARCH_IS_64
-       bool
-
-choice
-	prompt "Target Architecture"
-	default BR2_i386
-	help
-	  Select the target architecture family to build for.
-
-config BR2_arcle
-	bool "ARC (little endian)"
-	help
-	  Synopsys' DesignWare ARC Processor Cores are a family of 32-bit CPUs
-	  that can be used from deeply embedded to high performance host
-	  applications. Little endian.
-
-config BR2_arceb
-	bool "ARC (big endian)"
-	help
-	  Synopsys' DesignWare ARC Processor Cores are a family of 32-bit CPUs
-	  that can be used from deeply embedded to high performance host
-	  applications. Big endian.
-
-config BR2_arm
-	bool "ARM (little endian)"
-	help
-	  ARM is a 32-bit reduced instruction set computer (RISC) instruction
-	  set architecture (ISA) developed by ARM Holdings. Little endian.
-	  http://www.arm.com/
-	  http://en.wikipedia.org/wiki/ARM
-
-config BR2_armeb
-	bool "ARM (big endian)"
-	help
-	  ARM is a 32-bit reduced instruction set computer (RISC) instruction
-	  set architecture (ISA) developed by ARM Holdings. Big endian.
-	  http://www.arm.com/
-	  http://en.wikipedia.org/wiki/ARM
-
-config BR2_aarch64
-	bool "AArch64"
-	select BR2_ARCH_IS_64
-	help
-	  Aarch64 is a 64-bit architecture developed by ARM Holdings.
-	  http://www.arm.com/products/processors/instruction-set-architectures/armv8-architecture.php
-	  http://en.wikipedia.org/wiki/ARM
-
-config BR2_avr32
-	bool "AVR32"
-	select BR2_SOFT_FLOAT
-	help
-	  The AVR32 is a 32-bit RISC microprocessor architecture designed by
-	  Atmel.
-	  http://www.atmel.com/
-	  http://en.wikipedia.org/wiki/Avr32
-
-config BR2_bfin
-	bool "Blackfin"
-	help
-	  The Blackfin is a family of 16 or 32-bit microprocessors developed,
-	  manufactured and marketed by Analog Devices.
-	  http://www.analog.com/
-	  http://en.wikipedia.org/wiki/Blackfin
-
-config BR2_i386
-	bool "i386"
-	help
-	  Intel i386 architecture compatible microprocessor
-	  http://en.wikipedia.org/wiki/I386
-
-config BR2_m68k
-	bool "m68k"
-	depends on BROKEN # ice in uclibc / inet_ntoa_r
-	help
-	  Motorola 68000 family microprocessor
-	  http://en.wikipedia.org/wiki/M68k
-
-config BR2_microblazeel
-	bool "Microblaze AXI (little endian)"
-	help
-	  Soft processor core designed for Xilinx FPGAs from Xilinx. AXI bus
-	  based architecture (little endian)
-	  http://www.xilinx.com
-	  http://en.wikipedia.org/wiki/Microblaze
-
-config BR2_microblazebe
-	bool "Microblaze non-AXI (big endian)"
-	help
-	  Soft processor core designed for Xilinx FPGAs from Xilinx. PLB bus
-	  based architecture (non-AXI, big endian)
-	  http://www.xilinx.com
-	  http://en.wikipedia.org/wiki/Microblaze
-
-config BR2_mips
-	bool "MIPS (big endian)"
-	help
-	  MIPS is a RISC microprocessor from MIPS Technologies. Big endian.
-	  http://www.mips.com/
-	  http://en.wikipedia.org/wiki/MIPS_Technologies
-
-config BR2_mipsel
-	bool "MIPS (little endian)"
-	help
-	  MIPS is a RISC microprocessor from MIPS Technologies. Little endian.
-	  http://www.mips.com/
-	  http://en.wikipedia.org/wiki/MIPS_Technologies
-
-config BR2_mips64
-	bool "MIPS64 (big endian)"
-	select BR2_ARCH_IS_64
-	help
-	  MIPS is a RISC microprocessor from MIPS Technologies. Big endian.
-	  http://www.mips.com/
-	  http://en.wikipedia.org/wiki/MIPS_Technologies
-
-config BR2_mips64el
-	bool "MIPS64 (little endian)"
-	select BR2_ARCH_IS_64
-	help
-	  MIPS is a RISC microprocessor from MIPS Technologies. Little endian.
-	  http://www.mips.com/
-	  http://en.wikipedia.org/wiki/MIPS_Technologies
-
-config BR2_powerpc
-	bool "PowerPC"
-	help
-	  PowerPC is a RISC architecture created by Apple-IBM-Motorola alliance.
-	  http://www.power.org/
-	  http://en.wikipedia.org/wiki/Powerpc
-
-config BR2_sh
-	bool "SuperH"
-	help
-	  SuperH (or SH) is a 32-bit reduced instruction set computer (RISC)
-	  instruction set architecture (ISA) developed by Hitachi.
-	  http://www.hitachi.com/
-	  http://en.wikipedia.org/wiki/SuperH
-
-config BR2_sh64
-	bool "SuperH64"
-	help
-	  SuperH64 (or SH) is a 64-bit reduced instruction set computer (RISC)
-	  instruction set architecture (ISA) developed by Hitachi.
-	  http://www.hitachi.com/
-	  http://en.wikipedia.org/wiki/SuperH
-
-config BR2_sparc
-	bool "SPARC"
-	help
-	  SPARC (from Scalable Processor Architecture) is a RISC instruction
-	  set architecture (ISA) developed by Sun Microsystems.
-	  http://www.oracle.com/sun
-	  http://en.wikipedia.org/wiki/Sparc
-
-config BR2_x86_64
-	bool "x86_64"
-	select BR2_ARCH_IS_64
-	help
-	  x86-64 is an extension of the x86 instruction set (Intel i386
-	  architecture compatible microprocessor).
-	  http://en.wikipedia.org/wiki/X86_64
-
-config BR2_xtensa
-	bool "Xtensa"
-	help
-	  Xtensa is a Tensilica processor IP architecture.
-	  http://en.wikipedia.org/wiki/Xtensa
-	  http://www.tensilica.com/
-
-endchoice
-
-# The following string values are defined by the individual
-# Config.in.$ARCH files
-config BR2_ARCH
-	string
-
-config BR2_ENDIAN
-	string
-
-config BR2_GCC_TARGET_TUNE
-	string
-
-config BR2_GCC_TARGET_ARCH
-	string
-
-config BR2_GCC_TARGET_ABI
-	string
-
-config BR2_GCC_TARGET_CPU
-	string
-
-config BR2_GCC_TARGET_CPU_REVISION
-	string
-
-# Set up target binary format
-choice
-	prompt "Target Binary Format"
-	depends on BR2_bfin || BR2_m68k
-	default BR2_BINFMT_FDPIC
-
-config BR2_BINFMT_ELF
-	bool "ELF"
-	depends on !BR2_bfin && !BR2_m68k
-	help
-	  ELF (Executable and Linkable Format) is a format for libraries and
-	  executables used across different architectures and operating
-	  systems.
-
-config BR2_BINFMT_FDPIC
-	bool "FDPIC"
-	depends on BR2_bfin || BR2_m68k
-	help
-	  ELF FDPIC binaries are based on ELF, but allow the individual load
-	  segments of a binary to be located in memory independently of each
-	  other. This makes this format ideal for use in environments where no
-	  MMU is available.
-
-config BR2_BINFMT_FLAT
-	bool "FLAT"
-	depends on BR2_bfin || BR2_m68k
-	select BR2_PREFER_STATIC_LIB
-	help
-	  FLAT binary is a relatively simple and lightweight executable format
-	  based on the original a.out format. It is widely used in environment
-	  where no MMU is available.
-
-endchoice
-
-# Set up flat binary type
-choice
-	prompt "FLAT Binary type"
-	depends on BR2_BINFMT_FLAT
-	default BR2_BINFMT_FLAT_ONE
-
-config BR2_BINFMT_FLAT_ONE
-	bool "One memory region"
-	help
-	  All segments are linked into one memory region.
-
-config BR2_BINFMT_FLAT_SEP_DATA
-	bool "Separate data and code region"
-	depends on BR2_bfin || BR2_m68k
-	help
-	  Allow for the data and text segments to be separated and placed in
-	  different regions of memory.
-
-config BR2_BINFMT_FLAT_SHARED
-	bool "Shared binary"
-	depends on BR2_bfin || BR2_m68k
-	help
-	  Allow to load and link indiviual FLAT binaries at run time.
-
-endchoice
-
-if BR2_arcle || BR2_arceb
-source "arch/Config.in.arc"
-endif
-
-if BR2_arm || BR2_armeb
-source "arch/Config.in.arm"
-endif
-
-if BR2_aarch64
-source "arch/Config.in.aarch64"
-endif
-
-if BR2_avr32
-source "arch/Config.in.avr32"
-endif
-
-if BR2_bfin
-source "arch/Config.in.bfin"
-endif
-
-if BR2_m68k
-source "arch/Config.in.m68k"
-endif
-
-if BR2_microblazeel || BR2_microblazebe
-source "arch/Config.in.microblaze"
-endif
-
-if BR2_mips || BR2_mips64 || BR2_mipsel || BR2_mips64el
-source "arch/Config.in.mips"
-endif
-
-if BR2_powerpc
-source "arch/Config.in.powerpc"
-endif
-
-if BR2_sh || BR2_sh64
-source "arch/Config.in.sh"
-endif
-
-if BR2_sparc
-source "arch/Config.in.sparc"
-endif
-
-if BR2_i386 || BR2_x86_64
-source "arch/Config.in.x86"
-endif
-
-if BR2_xtensa
-source "arch/Config.in.xtensa"
-endif

arch/Config.in.aarch64

@@ -1,5 +0,0 @@
-config BR2_ARCH
-	default "aarch64"	if BR2_aarch64
-
-config BR2_ENDIAN
-	default "LITTLE"

arch/Config.in.arc

@@ -1,18 +0,0 @@
-config BR2_ARCH
-	default "arc"	if BR2_arcle
-	default "arceb"	if BR2_arceb
-
-config BR2_arc
-	bool
-	default y if BR2_arcle || BR2_arceb
-
-config BR2_ENDIAN
-	default "LITTLE" if BR2_arcle
-	default "BIG"	 if BR2_arceb
-
-config BR2_GCC_TARGET_CPU
-	default "arc700"
-
-config BR2_ARC_SITE
-	string
-	default "http://www.synopsys.com/apps/arc-developer/"

arch/Config.in.arm

@@ -1,148 +0,0 @@
-# arm cpu features
-config BR2_ARM_CPU_HAS_NEON
-	bool
-
-# for some cores, NEON support is optional
-config BR2_ARM_CPU_MAYBE_HAS_NEON
-	bool
-
-choice
-	prompt "Target Architecture Variant"
-	depends on BR2_arm || BR2_armeb
-	default BR2_arm926t
-	help
-	  Specific CPU variant to use
-
-config BR2_arm7tdmi
-	bool "arm7tdmi"
-config BR2_arm720t
-	bool "arm720t"
-config BR2_arm920t
-	bool "arm920t"
-config BR2_arm922t
-	bool "arm922t"
-config BR2_arm926t
-	bool "arm926t"
-config BR2_arm10t
-	bool "arm10t"
-config BR2_arm1136jf_s_r0
-	bool "arm1136jf_s rev0"
-config BR2_arm1136jf_s_r1
-	bool "arm1136jf_s rev1"
-config BR2_arm1176jz_s
-	bool "arm1176jz-s"
-config BR2_arm1176jzf_s
-	bool "arm1176jzf-s"
-config BR2_cortex_a5
-	bool "cortex-A5"
-	select BR2_ARM_CPU_MAYBE_HAS_NEON
-config BR2_cortex_a8
-	bool "cortex-A8"
-	select BR2_ARM_CPU_HAS_NEON
-config BR2_cortex_a9
-	bool "cortex-A9"
-	select BR2_ARM_CPU_MAYBE_HAS_NEON
-config BR2_cortex_a15
-	bool "cortex-A15"
-	select BR2_ARM_CPU_HAS_NEON
-config BR2_fa526
-	bool "fa526/626"
-config BR2_pj4
-	bool "pj4"
-config BR2_strongarm
-	bool "strongarm sa110/sa1100"
-config BR2_xscale
-	bool "xscale"
-config BR2_iwmmxt
-	bool "iwmmxt"
-endchoice
-
-config BR2_arm1136jf_s
-	bool
-	default BR2_arm1136jf_s_r0 || BR2_arm1136jf_s_r1
-
-choice
-	prompt "Target ABI"
-	depends on BR2_arm || BR2_armeb
-	depends on BR2_DEPRECATED
-	default BR2_ARM_EABI
-	help
-	  Application Binary Interface to use
-
-	  Note:
-	    Using OABI is discouraged.
-
-config BR2_ARM_EABI_CHOICE
-	bool "EABI"
-config BR2_ARM_OABI
-	bool "OABI"
-	depends on !BR2_GCC_VERSION_4_7_X
-endchoice
-
-config BR2_ARM_EABI
-	def_bool y
-	depends on !BR2_ARM_OABI
-
-config BR2_ARM_ENABLE_NEON
-	bool "Enable NEON SIMD extension support"
-	depends on BR2_ARM_CPU_MAYBE_HAS_NEON
-	select BR2_ARM_CPU_HAS_NEON
-	help
-	  For some CPU cores, the NEON SIMD extension is optional.
-	  Select this option if you are certain your particular
-	  implementation has NEON support and you want to use it.
-
-config BR2_ARCH
-	default "arm"	if BR2_arm
-	default "armeb"	if BR2_armeb
-
-config BR2_ENDIAN
-	default "LITTLE" if BR2_arm
-	default "BIG"	 if BR2_armeb
-
-config BR2_GCC_TARGET_TUNE
-	default "arm7tdmi"	if BR2_arm7tdmi
-	default "arm7tdmi"	if BR2_arm720t
-	default "arm7tdmi"	if BR2_arm740t
-	default "arm920"	if BR2_arm920
-	default "arm920t"	if BR2_arm920t
-	default "arm922t"	if BR2_arm922t
-	default "arm926ej-s"	if BR2_arm926t
-	default "arm1136j-s"	if BR2_arm1136j_s
-	default "arm1136jf-s"	if BR2_arm1136jf_s
-	default "arm1176jz-s"	if BR2_arm1176jz_s
-	default "arm1176jzf-s"	if BR2_arm1176jzf_s
-	default "cortex-a5"	if BR2_cortex_a5
-	default "cortex-a8"	if BR2_cortex_a8
-	default "cortex-a9"	if BR2_cortex_a9
-	default "cortex-a15"	if BR2_cortex_a15
-	default "fa526"		if BR2_fa526
-	default "marvell-pj4"	if BR2_pj4
-	default "strongarm"	if BR2_strongarm
-	default "xscale"	if BR2_xscale
-	default "iwmmxt"	if BR2_iwmmxt
-
-config BR2_GCC_TARGET_ARCH
-	default "armv4t"	if BR2_arm7tdmi
-	default "armv4t"	if BR2_arm720t
-	default "armv4t"	if BR2_arm920t
-	default "armv4t"	if BR2_arm922t
-	default "armv5te"	if BR2_arm926t
-	default "armv5t"	if BR2_arm10t
-	default "armv6j"	if BR2_arm1136jf_s_r0
-	default "armv6k"	if BR2_arm1136jf_s_r1
-	default "armv6zk"	if BR2_arm1176jz_s
-	default "armv6zk"	if BR2_arm1176jzf_s
-	default "armv7-a"	if BR2_cortex_a5
-	default "armv7-a"	if BR2_cortex_a8
-	default "armv7-a"	if BR2_cortex_a9
-	default "armv7-a"	if BR2_cortex_a15
-	default "armv4"		if BR2_fa526
-	default "armv7-a"	if BR2_pj4
-	default "armv4"		if BR2_strongarm
-	default "armv5te"	if BR2_xscale
-	default "iwmmxt"	if BR2_iwmmxt
-
-config BR2_GCC_TARGET_ABI
-	default "apcs-gnu"	if BR2_ARM_OABI
-	default "aapcs-linux"	if BR2_ARM_EABI

arch/Config.in.avr32

@@ -1,5 +0,0 @@
-config BR2_ARCH
-       default "avr32"
-
-config BR2_ENDIAN
-       default "BIG"

arch/Config.in.bfin

@@ -1,107 +0,0 @@
-choice
-	prompt "Target CPU"
-	depends on BR2_bfin
-	default BR2_bf609
-	help
-	  Specify target CPU
-config BR2_bf606
-	bool "bf606"
-config BR2_bf607
-	bool "bf607"
-config BR2_bf608
-	bool "bf608"
-config BR2_bf609
-	bool "bf609"
-config BR2_bf512
-	bool "bf512"
-config BR2_bf514
-	bool "bf514"
-config BR2_bf516
-	bool "bf516"
-config BR2_bf518
-	bool "bf518"
-config BR2_bf522
-	bool "bf522"
-config BR2_bf523
-	bool "bf523"
-config BR2_bf524
-	bool "bf524"
-config BR2_bf525
-	bool "bf525"
-config BR2_bf526
-	bool "bf526"
-config BR2_bf527
-	bool "bf527"
-config BR2_bf531
-	bool "bf531"
-config BR2_bf532
-	bool "bf532"
-config BR2_bf533
-	bool "bf533"
-config BR2_bf534
-	bool "bf534"
-config BR2_bf536
-	bool "bf536"
-config BR2_bf537
-	bool "bf537"
-config BR2_bf538
-	bool "bf538"
-config BR2_bf539
-	bool "bf539"
-config BR2_bf542
-	bool "bf542"
-config BR2_bf544
-	bool "bf544"
-config BR2_bf547
-	bool "bf547"
-config BR2_bf548
-	bool "bf548"
-config BR2_bf549
-	bool "bf549"
-config BR2_bf561
-	bool "bf561"
-endchoice
-
-config BR2_ARCH
-	default "bfin"
-
-config BR2_ENDIAN
-        default "LITTLE"
-
-config BR2_GCC_TARGET_CPU
-	default bf606		if BR2_bf606
-	default bf607		if BR2_bf607
-	default bf608		if BR2_bf608
-	default bf609		if BR2_bf609
-	default bf512		if BR2_bf512
-	default bf514		if BR2_bf514
-	default bf516		if BR2_bf516
-	default bf518		if BR2_bf518
-	default bf522		if BR2_bf522
-	default bf523		if BR2_bf523
-	default bf524		if BR2_bf524
-	default bf525		if BR2_bf525
-	default bf526		if BR2_bf526
-	default bf527		if BR2_bf527
-	default bf531		if BR2_bf531
-	default bf532		if BR2_bf532
-	default bf533		if BR2_bf533
-	default bf534		if BR2_bf534
-	default bf536		if BR2_bf536
-	default bf537		if BR2_bf537
-	default bf538		if BR2_bf538
-	default bf539		if BR2_bf539
-	default bf542		if BR2_bf542
-	default bf544		if BR2_bf544
-	default bf547		if BR2_bf547
-	default bf548		if BR2_bf548
-	default bf549		if BR2_bf549
-	default bf561		if BR2_bf561
-
-config BR2_GCC_TARGET_CPU_REVISION
-	string "Target CPU revision"
-	help
-	  Specify a target CPU revision, which will be appended to the
-	  value of the -mcpu option. For example, if the selected CPU is
-	  bf609, and then selected CPU revision is "0.0", then gcc will
-	  receive the -mcpu=bf609-0.0 option.

arch/Config.in.m68k

@@ -1,21 +0,0 @@
-config BR2_ARCH
-	default "m68k"		if BR2_m68k
-
-config BR2_ENDIAN
-	default "BIG"
-
-config BR2_GCC_TARGET_TUNE
-	default "68000"		if BR2_m68k_68000
-	default "68010"		if BR2_m68k_68010
-	default "68020"		if BR2_m68k_68020
-	default "68030"		if BR2_m68k_68030
-	default "68040"		if BR2_m68k_68040
-	default "68060"		if BR2_m68k_68060
-
-config BR2_GCC_TARGET_ARCH
-	default "68000"		if BR2_m68k_68000
-	default "68010"		if BR2_m68k_68010
-	default "68020"		if BR2_m68k_68020
-	default "68030"		if BR2_m68k_68030
-	default "68040"		if BR2_m68k_68040
-	default "68060"		if BR2_m68k_68060

arch/Config.in.microblaze

@@ -1,10 +0,0 @@
-config BR2_ARCH
-	default "microblaze"
-
-config BR2_ENDIAN
-	default "LITTLE" if BR2_microblazeel
-	default "BIG"	 if BR2_microblazebe
-
-config BR2_microblaze
-	bool
-	default y if BR2_microblazeel || BR2_microblazebe

arch/Config.in.mips

@@ -1,78 +0,0 @@
-choice
-	prompt "Target Architecture Variant"
-	depends on BR2_mips || BR2_mipsel || BR2_mips64 || BR2_mips64el
-	default BR2_mips_3 if BR2_mips
-	default BR2_mips_1 if BR2_mipsel
-	default BR2_mips_64 if BR2_mips64 || BR2_mips64el
-	help
-	  Specific CPU variant to use
-
-	  64bit cabable: 3, 4, 64, 64r2
-	  non-64bit capable: 1, 2, 32, 32r2
-
-config BR2_mips_1
-	bool "mips I (generic)"
-	depends on !BR2_ARCH_IS_64
-config BR2_mips_2
-	bool "mips II"
-	depends on !BR2_ARCH_IS_64
-config BR2_mips_3
-	bool "mips III"
-config BR2_mips_4
-	bool "mips IV"
-config BR2_mips_32
-	bool "mips 32"
-	depends on !BR2_ARCH_IS_64
-config BR2_mips_32r2
-	bool "mips 32r2"
-	depends on !BR2_ARCH_IS_64
-config BR2_mips_64
-	bool "mips 64"
-config BR2_mips_64r2
-	bool "mips 64r2"
-endchoice
-
-
-choice
-	prompt "Target ABI"
-	depends on BR2_mips || BR2_mipsel || BR2_mips64 || BR2_mips64el
-	default BR2_MIPS_OABI32 if !BR2_ARCH_IS_64
-	default BR2_MIPS_NABI32 if BR2_ARCH_IS_64
-
-	help
-	  Application Binary Interface to use
-
-config BR2_MIPS_OABI32
-	bool "o32"
-config BR2_MIPS_NABI32
-	bool "n32"
-	depends on BR2_ARCH_IS_64
-config BR2_MIPS_NABI64
-	bool "n64"
-	depends on BR2_ARCH_IS_64
-endchoice
-
-config BR2_ARCH
-	default "mips"		if BR2_mips
-	default "mipsel"	if BR2_mipsel
-	default "mips64"	if BR2_mips64
-	default "mips64el"	if BR2_mips64el
-
-config BR2_ENDIAN
-	default "LITTLE"	if BR2_mipsel || BR2_mips64el
-	default "BIG" 	    	if BR2_mips || BR2_mips64
-
-config BR2_GCC_TARGET_TUNE
-	default "mips1"		if BR2_mips_1
-	default "mips2"		if BR2_mips_2
-	default "mips3"		if BR2_mips_3
-	default "mips4"		if BR2_mips_4
-	default "mips32"	if BR2_mips_32
-	default "mips32r2"	if BR2_mips_32r2
-	default "mips64"	if BR2_mips_64
-	default "mips64r2"	if BR2_mips_64r2
-
-config BR2_GCC_TARGET_ABI
-	default "32"		if BR2_MIPS_OABI32
-	default "n32"		if BR2_MIPS_NABI32
-	default "64"		if BR2_MIPS_NABI64

arch/Config.in.powerpc

@@ -1,137 +0,0 @@
-choice
-	prompt "Target Architecture Variant"
-	depends on BR2_powerpc
-	default BR2_generic_powerpc
-	help
-	  Specific CPU variant to use
-config BR2_generic_powerpc
-	bool "generic"
-config BR2_powerpc_401
-	bool "401"
-config BR2_powerpc_403
-	bool "403"
-config BR2_powerpc_405
-	bool "405"
-config BR2_powerpc_405fp
-	bool "405 with FPU"
-config BR2_powerpc_440
-	bool "440"
-config BR2_powerpc_440fp
-	bool "440 with FPU"
-config BR2_powerpc_464
-	bool "464"
-config BR2_powerpc_464fp
-	bool "464 with FPU"
-config BR2_powerpc_476
-	bool "476"
-config BR2_powerpc_476fp
-	bool "476 with FPU"
-config BR2_powerpc_505
-	bool "505"
-config BR2_powerpc_601
-	bool "601"
-config BR2_powerpc_602
-	bool "602"
-config BR2_powerpc_603
-	bool "603"
-config BR2_powerpc_603e
-	bool "603e"
-config BR2_powerpc_604
-	bool "604"
-config BR2_powerpc_604e
-	bool "604e"
-config BR2_powerpc_620
-	bool "620"
-config BR2_powerpc_630
-	bool "630"
-config BR2_powerpc_740
-	bool "740"
-config BR2_powerpc_7400
-	bool "7400"
-config BR2_powerpc_7450
-	bool "7450"
-config BR2_powerpc_750
-	bool "750"
-config BR2_powerpc_821
-	bool "821"
-config BR2_powerpc_823
-	bool "823"
-config BR2_powerpc_860
-	bool "860"
-config BR2_powerpc_970
-	bool "970"
-config BR2_powerpc_8540
-	bool "8540 / e500v1"
-config BR2_powerpc_8548
-	bool "8548 / e500v2"
-config BR2_powerpc_e300c2
-	bool "e300c2"
-config BR2_powerpc_e300c3
-	bool "e300c3"
-config BR2_powerpc_e500mc
-	bool "e500mc"
-endchoice
-
-choice
-	prompt "Target ABI"
-	depends on BR2_powerpc
-	default BR2_powerpc_SPE if BR2_powerpc_8540 || BR2_powerpc_8548
-	default BR2_powerpc_CLASSIC
-	help
-	  Application Binary Interface to use
-
-config BR2_powerpc_CLASSIC
-	bool "Classic"
-	depends on !(BR2_powerpc_8540 || BR2_powerpc_8548)
-config BR2_powerpc_SPE
-	bool "SPE"
-	depends on BR2_powerpc_8540 || BR2_powerpc_8548
-endchoice
-
-config BR2_ARCH
-	default "powerpc"	if BR2_powerpc
-
-config BR2_ENDIAN
-	default "BIG"
-
-config BR2_GCC_TARGET_TUNE
-	default "401"		if BR2_powerpc_401
-	default "403"		if BR2_powerpc_403
-	default "405"		if BR2_powerpc_405
-	default "405fp"		if BR2_powerpc_405fp
-	default "440"		if BR2_powerpc_440
-	default "440fp"		if BR2_powerpc_440fp
-	default "464"		if BR2_powerpc_464
-	default "464fp"		if BR2_powerpc_464fp
-	default "476"		if BR2_powerpc_476
-	default "476fp"		if BR2_powerpc_476fp
-	default "505"		if BR2_powerpc_505
-	default "601"		if BR2_powerpc_601
-	default "602"		if BR2_powerpc_602
-	default "603"		if BR2_powerpc_603
-	default "603e"		if BR2_powerpc_603e
-	default "604"		if BR2_powerpc_604
-	default "604e"		if BR2_powerpc_604e
-	default "620"		if BR2_powerpc_620
-	default "630"		if BR2_powerpc_630
-	default "740"		if BR2_powerpc_740
-	default "7400"		if BR2_powerpc_7400
-	default "7450"		if BR2_powerpc_7450
-	default "750"		if BR2_powerpc_750
-	default "821"		if BR2_powerpc_821
-	default "823"		if BR2_powerpc_823
-	default "860"		if BR2_powerpc_860
-	default "970"		if BR2_powerpc_970
-	default "8540"		if BR2_powerpc_8540
-	default	"8548"		if BR2_powerpc_8548
-	default "e300c2"	if BR2_powerpc_e300c2
-	default "e300c3"	if BR2_powerpc_e300c3
-	default "e500mc"	if BR2_powerpc_e500mc
-
-config BR2_GCC_TARGET_ABI
-	default "altivec"		if BR2_PPC_ABI_altivec
-	default "no-altivec"		if BR2_PPC_ABI_no-altivec
-	default "spe"			if BR2_PPC_ABI_spe
-	default "no-spe"		if BR2_PPC_ABI_no-spe
-	default "ibmlongdouble"		if BR2_PPC_ABI_ibmlongdouble
-	default "ieeelongdouble"	if BR2_PPC_ABI_ieeelongdouble

arch/Config.in.sh

@@ -1,41 +0,0 @@
-choice
-	prompt "Target Architecture Variant"
-	depends on BR2_sh
-	default BR2_sh4
-	help
-	  Specific CPU variant to use
-
-config BR2_sh2
-	bool "sh2 (SH2 big endian)"
-config BR2_sh2a
-	bool "sh2a (SH2A big endian)"
-config BR2_sh3
-	bool "sh3 (SH3 little endian)"
-config BR2_sh3eb
-	bool "sh3eb (SH3 big endian)"
-config BR2_sh4
-	bool "sh4 (SH4 little endian)"
-config BR2_sh4eb
-	bool "sh4eb (SH4 big endian)"
-config BR2_sh4a
-	bool "sh4a (SH4A little endian)"
-config BR2_sh4aeb
-	bool "sh4aeb (SH4A big endian)"
-endchoice
-
-config BR2_ARCH
-	default "sh2"		if BR2_sh2
-	default "sh2a"		if BR2_sh2a
-	default "sh3"		if BR2_sh3
-	default "sh3eb"		if BR2_sh3eb
-	default "sh4"		if BR2_sh4
-	default "sh4eb"		if BR2_sh4eb
-	default "sh4a"		if BR2_sh4a
-	default "sh4aeb"	if BR2_sh4aeb
-	default "sh64"		if BR2_sh64
-
-config BR2_ENDIAN
-	default "LITTLE"	if BR2_sh3 || BR2_sh4 || BR2_sh4a || \
-				   BR2_x86_64 || BR2_sh64
-	default "BIG"		if BR2_sh2 || BR2_sh2a || BR2_sh3eb || \
-				   BR2_sh4eb || BR2_sh4aeb

arch/Config.in.sparc

@@ -1,39 +0,0 @@
-choice
-	prompt "Target Architecture Variant"
-	depends on BR2_sparc
-	default BR2_sparc_v8
-	help
-	  Specific CPU variant to use
-
-config BR2_sparc_v8
-	bool "v8"
-config BR2_sparc_sparchfleon
-	bool "hfleon"
-config BR2_sparc_sparchfleonv8
-	bool "hfleonv8"
-config BR2_sparc_sparcsfleon
-	bool "sfleon"
-config BR2_sparc_sparcsfleonv8
-	bool "sfleonv8"
-endchoice
-
-config BR2_ARCH
-	default "sparc"	if BR2_sparc
-
-config BR2_ENDIAN
-	default "BIG"
-
-config BR2_GCC_TARGET_TUNE
-	default "v8"		if BR2_sparc_v8
-	default "v9"		if BR2_sparc_v9
-	default "v9"		if BR2_sparc_v9a
-	default "v9"		if BR2_sparc_v9b
-	default "ultrasparc"	if BR2_sparc_ultrasparc
-	default "ultrasparc3"	if BR2_sparc_ultrasparc3
-	default "niagara"	if BR2_sparc_niagara
-
-config BR2_GCC_TARGET_CPU
-	default "sparchfleon"	if BR2_sparc_sparchfleon
-	default "sparchfleonv8"	if BR2_sparc_sparchfleonv8
-	default "sparcsfleon"	if BR2_sparc_sparcsfleon
-	default "sparcsfleonv8"	if BR2_sparc_sparcsfleonv8

arch/Config.in.x86

@@ -1,236 +0,0 @@
-# i386/x86_64 cpu features
-config BR2_X86_CPU_HAS_MMX
-	bool
-config BR2_X86_CPU_HAS_SSE
-	bool
-config BR2_X86_CPU_HAS_SSE2
-	bool
-config BR2_X86_CPU_HAS_SSE3
-	bool
-config BR2_X86_CPU_HAS_SSSE3
-	bool
-
-choice
-	prompt "Target Architecture Variant"
-	depends on BR2_i386 || BR2_x86_64
-	default BR2_x86_i586 if BR2_i386
-	default BR2_x86_generic if BR2_x86_64
-	help
-	  Specific CPU variant to use
-
-config BR2_x86_generic
-	bool "generic"
-config BR2_x86_i386
-	bool "i386"
-	depends on !BR2_x86_64
-config BR2_x86_i486
-	bool "i486"
-	depends on !BR2_x86_64
-config BR2_x86_i586
-	bool "i586"
-	depends on !BR2_x86_64
-config BR2_x86_i686
-	bool "i686"
-	depends on !BR2_x86_64
-config BR2_x86_pentiumpro
-	bool "pentium pro"
-	depends on !BR2_x86_64
-config BR2_x86_pentium_mmx
-	bool "pentium MMX"
-	select BR2_X86_CPU_HAS_MMX
-	depends on !BR2_x86_64
-config BR2_x86_pentium_m
-	bool "pentium mobile"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	depends on !BR2_x86_64
-config BR2_x86_pentium2
-	bool "pentium2"
-	select BR2_X86_CPU_HAS_MMX
-	depends on !BR2_x86_64
-config BR2_x86_pentium3
-	bool "pentium3"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	depends on !BR2_x86_64
-config BR2_x86_pentium4
-	bool "pentium4"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	depends on !BR2_x86_64
-config BR2_x86_prescott
-	bool "prescott"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-	depends on !BR2_x86_64
-config BR2_x86_nocona
-	bool "nocona"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-config BR2_x86_core2
-	bool "core2"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-	select BR2_X86_CPU_HAS_SSSE3
-config BR2_x86_atom
-	bool "atom"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-	select BR2_X86_CPU_HAS_SSSE3
-config BR2_x86_k6
-	bool "k6"
-	select BR2_X86_CPU_HAS_MMX
-	depends on !BR2_x86_64
-config BR2_x86_k6_2
-	bool "k6-2"
-	select BR2_X86_CPU_HAS_MMX
-	depends on !BR2_x86_64
-config BR2_x86_athlon
-	bool "athlon"
-	select BR2_X86_CPU_HAS_MMX
-	depends on !BR2_x86_64
-config BR2_x86_athlon_4
-	bool "athlon-4"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	depends on !BR2_x86_64
-config BR2_x86_opteron
-	bool "opteron"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-config BR2_x86_opteron_sse3
-	bool "opteron w/ SSE3"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-config BR2_x86_barcelona
-	bool "barcelona"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-config BR2_x86_geode
-	bool "geode"
-	# Don't include MMX support because there several variant of geode
-	# processor, some with MMX support, some without.
-	# See: http://en.wikipedia.org/wiki/Geode_%28processor%29
-	depends on !BR2_x86_64
-config BR2_x86_c3
-	bool "Via/Cyrix C3 (Samuel/Ezra cores)"
-	select BR2_X86_CPU_HAS_MMX
-	depends on !BR2_x86_64
-config BR2_x86_c32
-	bool "Via C3-2 (Nehemiah cores)"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	depends on !BR2_x86_64
-config BR2_x86_winchip_c6
-	bool "IDT Winchip C6"
-	select BR2_X86_CPU_HAS_MMX
-	depends on !BR2_x86_64
-config BR2_x86_winchip2
-	bool "IDT Winchip 2"
-	select BR2_X86_CPU_HAS_MMX
-	depends on !BR2_x86_64
-endchoice
-
-config BR2_ARCH
-	default "i386"		if BR2_x86_i386
-	default "i486"		if BR2_x86_i486
-	default "i586"		if BR2_x86_i586
-	default "i586"		if BR2_x86_pentium_mmx
-	default "i586"		if BR2_x86_geode
-	default "i586"		if BR2_x86_c3
-	default "i686"		if BR2_x86_c32
-	default "i586"		if BR2_x86_winchip_c6
-	default "i586"		if BR2_x86_winchip2
-	default "i686"		if BR2_x86_i686
-	default "i686"		if BR2_x86_pentium2
-	default "i686"		if BR2_x86_pentium3
-	default "i686"		if BR2_x86_pentium4
-	default "i686"		if BR2_x86_pentium_m
-	default "i686"		if BR2_x86_pentiumpro
-	default "i686"		if BR2_x86_prescott
-	default "i686"		if BR2_x86_nocona && BR2_i386
-	default "i686"		if BR2_x86_core2 && BR2_i386
-	default "i686"		if BR2_x86_atom && BR2_i386
-	default "i686"		if BR2_x86_opteron && BR2_i386
-	default "i686"		if BR2_x86_opteron_sse3 && BR2_i386
-	default "i686"		if BR2_x86_barcelona && BR2_i386
-	default "i686"		if BR2_x86_k6
-	default "i686"		if BR2_x86_k6_2
-	default "i686"		if BR2_x86_athlon
-	default "i686"		if BR2_x86_athlon_4
-	default "x86_64"	if BR2_x86_64
-	default "i386"		if BR2_x86_generic
-
-config BR2_ENDIAN
-	default "LITTLE"
-
-config BR2_GCC_TARGET_TUNE
-	default "i386"		if BR2_x86_i386
-	default "i486"		if BR2_x86_i486
-	default "i586"		if BR2_x86_i586
-	default "pentium-mmx"	if BR2_x86_pentium_mmx
-	default "i686"		if BR2_x86_i686
-	default "pentiumpro"	if BR2_x86_pentiumpro
-	default "pentium-m"	if BR2_x86_pentium_m
-	default "pentium2"	if BR2_x86_pentium2
-	default "pentium3"	if BR2_x86_pentium3
-	default "pentium4"	if BR2_x86_pentium4
-	default "prescott"	if BR2_x86_prescott
-	default "nocona"	if BR2_x86_nocona
-	default "core2"		if BR2_x86_core2
-	default "atom"		if BR2_x86_atom
-	default "k8"		if BR2_x86_opteron
-	default "k8-sse3"	if BR2_x86_opteron_sse3
-	default "barcelona"	if BR2_x86_barcelona
-	default "k6"		if BR2_x86_k6
-	default "k6-2"		if BR2_x86_k6_2
-	default "athlon"	if BR2_x86_athlon
-	default "athlon-4"	if BR2_x86_athlon_4
-	default "winchip-c6"	if BR2_x86_winchip_c6
-	default "winchip2"	if BR2_x86_winchip2
-	default "c3"		if BR2_x86_c3
-	default "c3-2"		if BR2_x86_c32
-	default "geode"		if BR2_x86_geode
-	default "generic"	if BR2_x86_generic
-
-config BR2_GCC_TARGET_ARCH
-	default "i386"		if BR2_x86_i386
-	default "i486"		if BR2_x86_i486
-	default "i586"		if BR2_x86_i586
-	default "pentium-mmx"	if BR2_x86_pentium_mmx
-	default "i686"		if BR2_x86_i686
-	default "pentiumpro"	if BR2_x86_pentiumpro
-	default "pentium-m"	if BR2_x86_pentium_m
-	default "pentium2"	if BR2_x86_pentium2
-	default "pentium3"	if BR2_x86_pentium3
-	default "pentium4"	if BR2_x86_pentium4
-	default "prescott"	if BR2_x86_prescott
-	default "nocona"	if BR2_x86_nocona
-	default "core2"		if BR2_x86_core2
-	default "atom"		if BR2_x86_atom
-	default "k8"		if BR2_x86_opteron
-	default "k8-sse3"	if BR2_x86_opteron_sse3
-	default "barcelona"	if BR2_x86_barcelona
-	default "k6"		if BR2_x86_k6
-	default "k6-2"		if BR2_x86_k6_2
-	default "athlon"	if BR2_x86_athlon
-	default "athlon-4"	if BR2_x86_athlon_4
-	default "winchip-c6"	if BR2_x86_winchip_c6
-	default "winchip2"	if BR2_x86_winchip2
-	default "c3"		if BR2_x86_c3
-	default "c3-2"		if BR2_x86_c32
-	default "geode"		if BR2_x86_geode

arch/Config.in.xtensa

@@ -1,37 +0,0 @@
-choice
-	prompt "Target Architecture Variant"
-	depends on BR2_xtensa
-	default BR2_xtensa_fsf
-config BR2_XTENSA_CUSTOM
-	bool "Custom Xtensa processor configuration"
-config BR2_xtensa_fsf
-	bool "fsf - Default configuration"
-endchoice
-
-config BR2_XTENSA_CUSTOM_NAME
-	string "Custom Xtensa processor configuration name"
-	depends on BR2_XTENSA_CUSTOM
-	default ""
-	help
-	  Name given to a custom Xtensa processor configuration.
-
-config BR2_XTENSA_CORE_NAME
-	string
-	default BR2_XTENSA_CUSTOM_NAME	if BR2_XTENSA_CUSTOM
-	default ""			if BR2_xtensa_fsf
-
-config BR2_XTENSA_OVERLAY_DIR
-	string "Overlay directory for custom configuration"
-	depends on BR2_XTENSA_CUSTOM
-	default ""
-	help
-	  Provide the directory path that contains the overlay file
-	  for a custom processor configuration. The path is relative
-	  to the top directory of buildroot.
-	  These overlay files are tar packages with updated configuration
-	  files for various toolchain packages and Xtensa processor
-	  configurations. They are provided by the processor vendor or
-	  directly from Tensilica.
-
-config BR2_ARCH
-	default "xtensa"	if BR2_xtensa

board/arm/foundation-v8/readme.txt

@@ -1,19 +0,0 @@
-This is the support for the ARM Foundation v8 machine emulated by the
-ARM software simulator of the AArch64 architecture.
-
-First, one has to download the AArch64 software simulator from:
-
-  https://silver.arm.com/download/download.tm?pv=1317469
-
-Then, use the arm_foundationv8_defconfig configuration to build your
-Buildroot system.
-
-Finally, boot your system with:
-
- ${LOCATION_OF_FOUNDATIONV8_SIMULATOR}/Foundation_v8 \
-    --image output/images/linux-system.axf \
-    --block-device output/images/rootfs.ext2 \
-    --network=nat
-
-You can get network access from within the simulated environment
-by requesting an IP address using DHCP (run the command 'udhcpc').

board/armadeus/apf27/linux-3.8.config

@@ -1,229 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CGROUPS=y
-CONFIG_EMBEDDED=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_MXC=y
-CONFIG_MXC_IRQ_PRIOR=y
-CONFIG_MACH_IMX27_DT=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_NWFPE=y
-CONFIG_FPE_NWFPE_XP=y
-CONFIG_PM_DEBUG=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-CONFIG_IPV6=y
-CONFIG_CAN=m
-CONFIG_CAN_RAW=m
-CONFIG_CAN_BCM=m
-CONFIG_CAN_VCAN=m
-CONFIG_CAN_MCP251X=m
-CONFIG_BT=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_HIDP=m
-CONFIG_BT_HCIBTUSB=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_CFG80211=m
-CONFIG_MAC80211=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-# CONFIG_MTD_CFI_I2 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_MXC=y
-CONFIG_MTD_UBI=y
-CONFIG_PROC_DEVICETREE=y
-CONFIG_EEPROM_AT24=y
-CONFIG_EEPROM_AT25=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_MII=y
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_CIRRUS is not set
-# CONFIG_NET_VENDOR_FARADAY is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_MICROCHIP is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_NET_VENDOR_SEEQ is not set
-# CONFIG_NET_VENDOR_SMSC is not set
-# CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_WIZNET is not set
-CONFIG_SMSC_PHY=y
-CONFIG_RTL8187=m
-CONFIG_LIBERTAS=m
-CONFIG_LIBERTAS_SDIO=m
-CONFIG_RT2X00=m
-CONFIG_RT2500USB=m
-CONFIG_RT73USB=m
-CONFIG_RT2800USB=m
-CONFIG_RTL8192CU=m
-CONFIG_ZD1211RW=m
-CONFIG_INPUT_JOYDEV=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_IMX=m
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_JOYSTICK=y
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_IMX=y
-CONFIG_SPI=y
-CONFIG_SPI_IMX=y
-CONFIG_SPI_SPIDEV=m
-CONFIG_GPIO_SYSFS=y
-CONFIG_W1=y
-CONFIG_W1_MASTER_MXC=y
-CONFIG_W1_SLAVE_THERM=y
-CONFIG_WATCHDOG=y
-CONFIG_IMX2_WDT=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_MEDIA_SUPPORT=m
-CONFIG_MEDIA_CAMERA_SUPPORT=y
-CONFIG_MEDIA_USB_SUPPORT=y
-CONFIG_USB_VIDEO_CLASS=m
-CONFIG_USB_PWC=m
-CONFIG_V4L_PLATFORM_DRIVERS=y
-CONFIG_SOC_CAMERA=m
-CONFIG_VIDEO_MX2=m
-# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
-# CONFIG_DVB_AU8522_V4L is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
-# CONFIG_DVB_TUNER_DIB0090 is not set
-CONFIG_FB=y
-# CONFIG_FB_MX3 is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_SOUND=m
-CONFIG_SND=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_USB is not set
-CONFIG_SND_SOC=m
-CONFIG_SND_IMX_SOC=m
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_MXC=y
-CONFIG_USB_CHIPIDEA=y
-CONFIG_USB_CHIPIDEA_HOST=y
-CONFIG_USB_CHIPIDEA_DEBUG=y
-CONFIG_USB_ACM=y
-CONFIG_USB_PRINTER=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SERIAL=y
-CONFIG_USB_SERIAL_FTDI_SIO=y
-CONFIG_USB_SERIAL_PL2303=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_MASS_STORAGE=m
-CONFIG_USB_G_HID=m
-CONFIG_USB_ULPI=y
-CONFIG_MMC=y
-CONFIG_MMC_MXC=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_ONESHOT=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_LEDS_TRIGGER_TRANSIENT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_DS1374=y
-CONFIG_RTC_DRV_MXC=m
-CONFIG_DMADEVICES=y
-CONFIG_IMX_SDMA=y
-CONFIG_IMX_DMA=y
-# CONFIG_IOMMU_SUPPORT is not set
-CONFIG_IIO=m
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_DNOTIFY is not set
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_UBIFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=m
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_FS=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_PREEMPT is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_LL=y
-CONFIG_EARLY_PRINTK=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set

board/armadeus/apf28/linux-3.8.config

@@ -1,180 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_BSD_DISKLABEL=y
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_MXS=y
-CONFIG_MACH_MXS_DT=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CPU_IDLE=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-CONFIG_IPV6=y
-CONFIG_CAN=m
-CONFIG_CAN_RAW=m
-CONFIG_CAN_BCM=m
-CONFIG_CAN_VCAN=m
-CONFIG_CAN_FLEXCAN=m
-CONFIG_BT=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_BT_HCIBTUSB=m
-CONFIG_CFG80211=m
-CONFIG_MAC80211=m
-CONFIG_MAC80211_RC_PID=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_FW_LOADER=m
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_GPMI_NAND=y
-CONFIG_MTD_UBI=y
-CONFIG_EEPROM_AT24=y
-CONFIG_EEPROM_AT25=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_CHR_DEV_SCH=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_NETDEVICES=y
-CONFIG_RTL8187=m
-CONFIG_RT2X00=m
-CONFIG_RT73USB=m
-CONFIG_ZD1211RW=m
-CONFIG_INPUT_JOYDEV=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_MXS_AUART=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MXS=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=m
-CONFIG_SPI_MXS=y
-CONFIG_SPI_SPIDEV=m
-CONFIG_GPIO_SYSFS=y
-CONFIG_HWMON=m
-CONFIG_WATCHDOG=y
-CONFIG_MEDIA_SUPPORT=m
-CONFIG_MEDIA_CAMERA_SUPPORT=y
-CONFIG_FB=y
-CONFIG_FB_MXS=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_GENERIC is not set
-CONFIG_BACKLIGHT_PWM=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_CHIPIDEA=y
-CONFIG_USB_CHIPIDEA_HOST=y
-CONFIG_USB_ACM=y
-CONFIG_USB_PRINTER=y
-CONFIG_USB_WDM=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_ETH=m
-CONFIG_USB_ULPI=y
-CONFIG_USB_MXS_PHY=y
-CONFIG_MMC=y
-CONFIG_MMC_MXS=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_ONESHOT=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_STMP=y
-CONFIG_DMADEVICES=y
-CONFIG_MXS_DMA=y
-CONFIG_STAGING=y
-CONFIG_MXS_LRADC=y
-CONFIG_IIO=y
-CONFIG_PWM=y
-CONFIG_PWM_MXS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT2_FS_XIP=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_UBIFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_FS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set

board/armadeus/apf9328/linux-3.1.1-0001-fixes_arm_mach-types_for_apf9328.patch

@@ -1,26 +0,0 @@
-From 053ba505eb0d40287ac5750daf454af0aed2ce75 Mon Sep 17 00:00:00 2001
-From: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com>
-Date: Tue, 4 Oct 2011 14:19:58 +0200
-Subject: [PATCH 1/2] [ARM] mach-types: Re-add apf9328
-
-
-Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com>
----
- arch/arm/tools/mach-types |    1 +
- 1 files changed, 1 insertions(+), 0 deletions(-)
-
-diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
-index fff68d0..07811a7 100644
---- a/arch/arm/tools/mach-types
-+++ b/arch/arm/tools/mach-types
-@@ -188,6 +188,7 @@ omap_2430sdp		MACH_OMAP_2430SDP	OMAP_2430SDP		900
- davinci_evm		MACH_DAVINCI_EVM	DAVINCI_EVM		901
- palmz72			MACH_PALMZ72		PALMZ72			904
- nxdb500			MACH_NXDB500		NXDB500			905
-+apf9328			MACH_APF9328		APF9328			906
- palmt5			MACH_PALMT5		PALMT5			917
- palmtc			MACH_PALMTC		PALMTC			918
- omap_apollon		MACH_OMAP_APOLLON	OMAP_APOLLON		919
--- 
-1.7.3.4
-

board/armadeus/apf9328/linux-3.1.1-0002-add_missing_config_option_for_apf9328.patch

@@ -1,16 +0,0 @@
-APF9328 needs CONFIG_MTD_CFI_INTELEXT to boot on its NOR FLASH.
-
-Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
-
-Index: linux-3.1.1/arch/arm/mach-imx/Kconfig
-===================================================================
---- linux-3.1.1.orig/arch/arm/mach-imx/Kconfig	2011-11-16 14:45:55.000000000 +0100
-+++ linux-3.1.1/arch/arm/mach-imx/Kconfig	2011-11-16 14:47:20.000000000 +0100
-@@ -84,6 +84,7 @@
- 	bool "APF9328"
- 	select SOC_IMX1
- 	select IMX_HAVE_PLATFORM_IMX_UART
-+	select MTD_CFI_INTELEXT
- 	help
- 	  Say Yes here if you are using the Armadeus APF9328 development board
- 

board/atmel/at91sam9260ek/linux-3.9.config

@@ -1,98 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_KERNEL_LZO=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9260=y
-CONFIG_ARCH_AT91SAM9260_SAM9XE=y
-CONFIG_MACH_AT91SAM9260EK=y
-CONFIG_MACH_CAM60=y
-CONFIG_MACH_SAM9_L9260=y
-CONFIG_MACH_AFEB9260=y
-CONFIG_MACH_USB_A9260=y
-CONFIG_MACH_QIL_A9260=y
-CONFIG_MACH_CPU9260=y
-CONFIG_MACH_FLEXIBITY=y
-CONFIG_MACH_SNAPPER_9260=y
-CONFIG_MACH_AT91SAM_DT=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_NETDEVICES=y
-CONFIG_MII=y
-CONFIG_MACB=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91SAM9X_WATCHDOG=y
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_STORAGE_DEBUG=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_MASS_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_EXT2_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_UBIFS_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y

board/avnet/s6lx9_microboard/lx9_mmu.dts

@@ -1,247 +0,0 @@
-/*
- * Device Tree Generator version: 1.3
- *
- * (C) Copyright 2007-2008 Xilinx, Inc.
- * (C) Copyright 2007-2009 Michal Simek
- *
- * Michal SIMEK <monstr@monstr.eu>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * CAUTION: This file is automatically generated by libgen.
- * Version: Xilinx EDK 13.2 EDK_O.61xd
- *
- * XPS project directory: device-tree_bsp_230-orig
- */
-
-/dts-v1/;
-/ {
-    #address-cells = <1>;
-    #size-cells = <1>;
-    compatible = "xlnx,microblaze";
-    model = "testing";
-    MCB3_LPDDR: memory@80000000 {
-        device_type = "memory";
-        reg = < 0x80000000 0x4000000 >;
-    } ;
-    aliases {
-        ethernet0 = &Ethernet_MAC;
-        serial0 = &USB_Uart;
-    } ;
-    chosen {
-        bootargs = "console=ttyUL0";
-        linux,stdout-path = "/axi@0/serial@40600000";
-    } ;
-    cpus {
-        #address-cells = <1>;
-        #cpus = <0x1>;
-        #size-cells = <0>;
-        microblaze_0: cpu@0 {
-            clock-frequency = <66666667>;
-            compatible = "xlnx,microblaze-8.20.a";
-            d-cache-baseaddr = <0x80000000>;
-            d-cache-highaddr = <0x83ffffff>;
-            d-cache-line-size = <0x10>;
-            d-cache-size = <0x2000>;
-            device_type = "cpu";
-            i-cache-baseaddr = <0x80000000>;
-            i-cache-highaddr = <0x83ffffff>;
-            i-cache-line-size = <0x10>;
-            i-cache-size = <0x2000>;
-            model = "microblaze,8.20.a";
-            reg = <0>;
-            timebase-frequency = <66666667>;
-            xlnx,addr-tag-bits = <0xd>;
-            xlnx,allow-dcache-wr = <0x1>;
-            xlnx,allow-icache-wr = <0x1>;
-            xlnx,area-optimized = <0x0>;
-            xlnx,avoid-primitives = <0x0>;
-            xlnx,branch-target-cache-size = <0x0>;
-            xlnx,cache-byte-size = <0x2000>;
-            xlnx,d-axi = <0x1>;
-            xlnx,d-lmb = <0x1>;
-            xlnx,d-plb = <0x0>;
-            xlnx,data-size = <0x20>;
-            xlnx,dcache-addr-tag = <0xd>;
-            xlnx,dcache-always-used = <0x1>;
-            xlnx,dcache-byte-size = <0x2000>;
-            xlnx,dcache-data-width = <0x0>;
-            xlnx,dcache-force-tag-lutram = <0x0>;
-            xlnx,dcache-interface = <0x0>;
-            xlnx,dcache-line-len = <0x4>;
-            xlnx,dcache-use-fsl = <0x0>;
-            xlnx,dcache-use-writeback = <0x0>;
-            xlnx,dcache-victims = <0x0>;
-            xlnx,debug-enabled = <0x1>;
-            xlnx,div-zero-exception = <0x0>;
-            xlnx,dynamic-bus-sizing = <0x1>;
-            xlnx,ecc-use-ce-exception = <0x0>;
-            xlnx,edge-is-positive = <0x1>;
-            xlnx,endianness = <0x1>;
-            xlnx,family = "spartan6";
-            xlnx,fault-tolerant = <0x0>;
-            xlnx,fpu-exception = <0x0>;
-            xlnx,freq = <0x3f940ab>;
-            xlnx,fsl-data-size = <0x20>;
-            xlnx,fsl-exception = <0x0>;
-            xlnx,fsl-links = <0x0>;
-            xlnx,i-axi = <0x0>;
-            xlnx,i-lmb = <0x1>;
-            xlnx,i-plb = <0x0>;
-            xlnx,icache-always-used = <0x1>;
-            xlnx,icache-data-width = <0x0>;
-            xlnx,icache-force-tag-lutram = <0x0>;
-            xlnx,icache-interface = <0x0>;
-            xlnx,icache-line-len = <0x4>;
-            xlnx,icache-streams = <0x0>;
-            xlnx,icache-use-fsl = <0x0>;
-            xlnx,icache-victims = <0x0>;
-            xlnx,ill-opcode-exception = <0x0>;
-            xlnx,instance = "microblaze_0";
-            xlnx,interconnect = <0x2>;
-            xlnx,interconnect-m-axi-dc-aw-register = <0x0>;
-            xlnx,interconnect-m-axi-dc-read-issuing = <0x2>;
-            xlnx,interconnect-m-axi-dc-w-register = <0x0>;
-            xlnx,interconnect-m-axi-dc-write-issuing = <0x20>;
-            xlnx,interconnect-m-axi-dp-read-issuing = <0x1>;
-            xlnx,interconnect-m-axi-dp-write-issuing = <0x1>;
-            xlnx,interconnect-m-axi-ic-read-issuing = <0x2>;
-            xlnx,interconnect-m-axi-ip-read-issuing = <0x1>;
-            xlnx,interrupt-is-edge = <0x0>;
-            xlnx,lockstep-slave = <0x0>;
-            xlnx,mmu-dtlb-size = <0x1>;
-            xlnx,mmu-itlb-size = <0x1>;
-            xlnx,mmu-privileged-instr = <0x0>;
-            xlnx,mmu-tlb-access = <0x3>;
-            xlnx,mmu-zones = <0x2>;
-            xlnx,number-of-pc-brk = <0x1>;
-            xlnx,number-of-rd-addr-brk = <0x0>;
-            xlnx,number-of-wr-addr-brk = <0x0>;
-            xlnx,opcode-0x0-illegal = <0x0>;
-            xlnx,optimization = <0x0>;
-            xlnx,pvr = <0x0>;
-            xlnx,pvr-user1 = <0x0>;
-            xlnx,pvr-user2 = <0x0>;
-            xlnx,reset-msr = <0x0>;
-            xlnx,sco = <0x0>;
-            xlnx,stream-interconnect = <0x0>;
-            xlnx,unaligned-exceptions = <0x0>;
-            xlnx,use-barrel = <0x1>;
-            xlnx,use-branch-target-cache = <0x0>;
-            xlnx,use-dcache = <0x1>;
-            xlnx,use-div = <0x0>;
-            xlnx,use-ext-brk = <0x1>;
-            xlnx,use-ext-nm-brk = <0x1>;
-            xlnx,use-extended-fsl-instr = <0x0>;
-            xlnx,use-fpu = <0x0>;
-            xlnx,use-hw-mul = <0x1>;
-            xlnx,use-icache = <0x1>;
-            xlnx,use-interrupt = <0x1>;
-            xlnx,use-mmu = <0x3>;
-            xlnx,use-msr-instr = <0x1>;
-            xlnx,use-pcmp-instr = <0x0>;
-            xlnx,use-stack-protection = <0x0>;
-        } ;
-    } ;
-    axi4lite_0: axi@0 {
-        #address-cells = <1>;
-        #size-cells = <1>;
-        compatible = "xlnx,axi-interconnect-1.03.a", "simple-bus";
-        ranges ;
-        Ethernet_MAC: ethernet@40e00000 {
-            compatible = "xlnx,axi-ethernetlite-1.00.a", "xlnx,xps-ethernetlite-1.00.a";
-            device_type = "network";
-            interrupt-parent = <&microblaze_0_intc>;
-            interrupts = < 2 0 >;
-            local-mac-address = [ 00 0a 35 aa de 00 ];
-//            phy-handle = <&phy0>;
-            reg = < 0x40e00000 0x10000 >;
-            xlnx,duplex = <0x1>;
-            xlnx,family = "spartan6";
-            xlnx,include-global-buffers = <0x0>;
-            xlnx,include-internal-loopback = <0x0>;
-            xlnx,include-mdio = <0x1>;
-            xlnx,include-phy-constraints = <0x1>;
-            xlnx,interconnect-s-axi-read-acceptance = <0x1>;
-            xlnx,interconnect-s-axi-write-acceptance = <0x1>;
-            xlnx,rx-ping-pong = <0x0>;
-            xlnx,s-axi-aclk-period-ps = <0x3a98>;
-            xlnx,s-axi-id-width = <0x1>;
-            xlnx,s-axi-supports-narrow-burst = <0x0>;
-            xlnx,tx-ping-pong = <0x0>;
-/*
-            mdio {
-                #address-cells = <1>;
-                #size-cells = <0>;
-                phy0: phy@7 {
-                    compatible = "marvell,88e1111";
-                    device_type = "ethernet-phy";
-                    reg = <7>;
-                } ;
-            } ;
-*/
-        } ;
-        SPI_FLASH: spi@40a00000 {
-            compatible = "xlnx,axi-spi-1.01.a", "xlnx,xps-spi-2.00.a";
-            interrupt-parent = <&microblaze_0_intc>;
-            interrupts = < 1 2 >;
-            reg = < 0x40a00000 0x10000 >;
-            xlnx,family = "spartan6";
-            xlnx,fifo-exist = <0x1>;
-            xlnx,num-ss-bits = <0x1>;
-            xlnx,num-transfer-bits = <0x8>;
-            xlnx,sck-ratio = <0x4>;
-        } ;
-        USB_Uart: serial@40600000 {
-            clock-frequency = <66666667>;
-            compatible = "xlnx,axi-uartlite-1.02.a", "xlnx,xps-uartlite-1.00.a";
-            current-speed = <115200>;
-            device_type = "serial";
-            interrupt-parent = <&microblaze_0_intc>;
-            interrupts = < 3 0 >;
-            port-number = <0>;
-            reg = < 0x40600000 0x10000 >;
-            xlnx,baudrate = <0x1c200>;
-            xlnx,data-bits = <0x8>;
-            xlnx,family = "spartan6";
-            xlnx,odd-parity = <0x1>;
-            xlnx,s-axi-aclk-freq-hz = <0x3f940ab>;
-            xlnx,use-parity = <0x0>;
-        } ;
-        microblaze_0_intc: interrupt-controller@41200000 {
-            #interrupt-cells = <0x2>;
-            compatible = "xlnx,axi-intc-1.01.a", "xlnx,xps-intc-1.00.a";
-            interrupt-controller ;
-            reg = < 0x41200000 0x10000 >;
-            xlnx,kind-of-intr = <0xc>;
-            xlnx,num-intr-inputs = <0x4>;
-        } ;
-        system_timer: timer@41c00000 {
-            clock-frequency = <66666667>;
-            compatible = "xlnx,axi-timer-1.02.a", "xlnx,xps-timer-1.00.a";
-            interrupt-parent = <&microblaze_0_intc>;
-            interrupts = < 0 2 >;
-            reg = < 0x41c00000 0x10000 >;
-            xlnx,count-width = <0x20>;
-            xlnx,family = "spartan6";
-            xlnx,gen0-assert = <0x1>;
-            xlnx,gen1-assert = <0x1>;
-            xlnx,one-timer-only = <0x0>;
-            xlnx,trig0-assert = <0x1>;
-            xlnx,trig1-assert = <0x1>;
-        } ;
-    } ;
-} ;

board/avnet/s6lx9_microboard/lx9_mmu_defconfig

@@ -1,68 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="rootfs.cpio"
-CONFIG_INITRAMFS_COMPRESSION_GZIP=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_HOTPLUG is not set
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-# CONFIG_SIGNALFD is not set
-# CONFIG_SHMEM is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_OPT_LIB_ASM is not set
-CONFIG_KERNEL_BASE_ADDR=0x80000000
-CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan6"
-CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
-# CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR is not set
-CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
-CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1
-CONFIG_XILINX_MICROBLAZE0_HW_VER="8.20.a"
-CONFIG_HZ_100=y
-CONFIG_MMU=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE_FORCE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_PROC_DEVICETREE=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_XILINX_EMACLITE=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_UARTLITE=y
-CONFIG_SERIAL_UARTLITE_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_CIFS=y
-CONFIG_CIFS_STATS=y
-CONFIG_CIFS_STATS2=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DEBUG_SLAB=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_INFO=y
-CONFIG_EARLY_PRINTK=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set

board/avnet/s6lx9_microboard/readme.txt

@@ -1,70 +0,0 @@
-This is the buildroot board support for the Avnet Spartan6 LX9 MicroBoard.
-
-The Avnet S6LX9 Microboard is a small USB-Stick sized module containing
-a Spartan6 FPGA capable of running the Microblaze softcore processor
-together with RAM and FLASH memory.
-
-The board can be bought from Avnet (avnet.com) or from Trenz Electronic
-(www.trenz-electronic.de) for a low price.
-
-To run the Linux built with buildroot you have to install the FPGA bitfile
-and u-boot as described in the tutorial AvtS6LX9MicroBoard_SW302_PetaLinux
-available on http://www.em.avnet.com/s6microboard
-
-On this site also is a forum containing information on how to build your own
-Microblaze processor for the Microboard.
-
-The image file (default name is simpleImage.lx9_mmu.ub) has to be copied
-to your tftp folder (often /tftpboot/) or can be programmed into the
-board's SPI flash.
-
-Sample session:
-
-$ make s6lx9_microboard_defconfig
-$ make
-$ cp build/linux-<version>/arch/microblaze/boot/simpleImage.lx9_mmu.ub /tftpboot/br12.2a.ub
-$ minicom
-<hit the reset button on the S6LX9 Microboard>
-
-                Icache:ON
-                Dcache:ON
-        U-Boot Start:0x83f00000
-SF: Got idcode 20 ba 18 10 01
-*** Warning - bad CRC, using default environment
-
-Net:   Xilinx_Emaclite
-MAC:   00:0a:35:00:63:37
-U-BOOT for Avnet-LX9-Microboard-AXI-tiny-13.1
-
-BOOTP broadcast 1
-DHCP client bound to address 192.168.11.122
-Hit any key to stop autoboot:  0
-U-Boot-PetaLinux> tftp br12.2a.ub
-Using Xilinx_Emaclite device
-TFTP from server 192.168.11.10; our IP address is 192.168.11.122
-Filename 'br12.2a.ub'.
-Load address: 0x80002000
-Loading: #################################################################
-         #################################################################
-         #################################################################
-         #################################################################
-         #################################################################
-         ##############################
-done
-Bytes transferred = 5207724 (4f76ac hex)
-U-Boot-PetaLinux> bootm
-## Booting kernel from Legacy Image at 80002000 ...
-   Image Name:   Linux-3.1.0
-   Image Type:   MicroBlaze Linux Kernel Image (uncompressed)
-   Data Size:    5207660 Bytes =  5 MB
-   Load Address: 80000000
-   Entry Point:  80000000
-   Verifying Checksum ... OK
-   Loading Kernel Image ... OK
-OK
-## Transferring control to Linux (at address 80000000), 0x80000000 ramdisk 0x00000000, FDT 0x00000000...
-Early console on uartlite at 0x40600000
-..... boot log skipped
-
-Welcome to Microblaze Buildroot
-Microblaze login:

board/beaglebone/linux-3.2.9.config

@@ -1,252 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_DEFAULT_HOSTNAME="beaglebone"
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_FHANDLE=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_NAMESPACES=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_BLK_DEV_INTEGRITY=y
-CONFIG_ARCH_OMAP=y
-CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MBOX_FWK=y
-# CONFIG_OMAP_32K_TIMER is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP4 is not set
-# CONFIG_SOC_OMAP3430 is not set
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_DEVKIT8000 is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OMAP3530_LV_SOM is not set
-# CONFIG_MACH_OMAP3_TORPEDO is not set
-# CONFIG_MACH_ENCORE is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3EVM is not set
-# CONFIG_MACH_OMAP3517EVM is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
-# CONFIG_MACH_OMAP3_TOUCHBOOK is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_NOKIA_RM680 is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_ZOOM2 is not set
-# CONFIG_MACH_OMAP_ZOOM3 is not set
-# CONFIG_MACH_CM_T35 is not set
-# CONFIG_MACH_CM_T3517 is not set
-# CONFIG_MACH_IGEP0020 is not set
-# CONFIG_MACH_IGEP0030 is not set
-# CONFIG_MACH_SBC3530 is not set
-# CONFIG_MACH_OMAP_3630SDP is not set
-# CONFIG_MACH_TI8168EVM is not set
-# CONFIG_MACH_TI8148EVM is not set
-# CONFIG_MACH_AM335XIAEVM is not set
-CONFIG_OMAP3_EDMA=y
-CONFIG_ARM_THUMBEE=y
-CONFIG_ARM_ERRATA_430973=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_THUMB2_KERNEL=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=" debug "
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_BINFMT_MISC=y
-# CONFIG_SUSPEND is not set
-CONFIG_PM_DEBUG=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_RFKILL_REGULATOR=m
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_CONNECTOR=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=2
-CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_MISC_DEVICES=y
-CONFIG_BMP085=m
-CONFIG_EEPROM_AT24=y
-CONFIG_EEPROM_93CX6=m
-CONFIG_SENSORS_LIS3_I2C=y
-CONFIG_NETDEVICES=y
-CONFIG_MII=y
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_CHELSIO is not set
-# CONFIG_NET_VENDOR_FARADAY is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_MICROCHIP is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_NET_VENDOR_SEEQ is not set
-# CONFIG_NET_VENDOR_SMSC is not set
-# CONFIG_NET_VENDOR_STMICRO is not set
-CONFIG_TI_CPSW=y
-CONFIG_SMSC_PHY=y
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_MOUSE_PS2 is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_AD714X=m
-CONFIG_INPUT_BMA150=m
-CONFIG_INPUT_MMA8450=m
-CONFIG_INPUT_MPU3050=m
-CONFIG_INPUT_ATI_REMOTE2=m
-CONFIG_INPUT_KEYSPAN_REMOTE=m
-CONFIG_INPUT_KXTJ9=m
-CONFIG_INPUT_POWERMATE=m
-CONFIG_INPUT_YEALINK=m
-CONFIG_INPUT_CM109=m
-CONFIG_INPUT_TWL4030_PWRBUTTON=y
-CONFIG_INPUT_TWL4030_VIBRA=m
-CONFIG_INPUT_TWL6040_VIBRA=m
-CONFIG_INPUT_UINPUT=m
-CONFIG_INPUT_PCF8574=m
-CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
-CONFIG_INPUT_ADXL34X=m
-CONFIG_INPUT_CMA3000=m
-CONFIG_INPUT_CMA3000_I2C=m
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-CONFIG_HW_RANDOM=y
-CONFIG_RAW_DRIVER=m
-CONFIG_I2C_CHARDEV=y
-CONFIG_SPI=y
-CONFIG_SPI_GPIO=m
-CONFIG_SPI_OMAP24XX=y
-CONFIG_SPI_SPIDEV=m
-CONFIG_DEBUG_GPIO=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_TWL4030=y
-CONFIG_GENERIC_PWM=y
-CONFIG_DAVINCI_EHRPWM=y
-CONFIG_ECAP_PWM=y
-CONFIG_POWER_SUPPLY=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_OMAP_WATCHDOG=y
-CONFIG_TWL4030_WATCHDOG=y
-CONFIG_MFD_TPS65217=y
-CONFIG_REGULATOR_DUMMY=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
-CONFIG_REGULATOR_USERSPACE_CONSUMER=y
-CONFIG_REGULATOR_GPIO=y
-CONFIG_REGULATOR_TWL4030=y
-CONFIG_REGULATOR_TPS65023=y
-CONFIG_REGULATOR_TPS6507X=y
-CONFIG_REGULATOR_TPS65217=y
-CONFIG_DISPLAY_SUPPORT=y
-CONFIG_HIDRAW=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_TI81XX_GLUE=y
-CONFIG_USB_TI_CPPI41_DMA_HW=y
-CONFIG_USB_ACM=y
-CONFIG_USB_LIBUSUAL=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_ETH=m
-CONFIG_USB_MASS_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_CDC_COMPOSITE=m
-CONFIG_USB_G_MULTI=m
-CONFIG_USB_G_HID=m
-CONFIG_MMC=y
-CONFIG_MMC_UNSAFE_RESUME=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_UIO=m
-CONFIG_UIO_PDRV=m
-CONFIG_UIO_PDRV_GENIRQ=m
-CONFIG_UIO_PRUSS=m
-CONFIG_STAGING=y
-CONFIG_IIO=y
-CONFIG_IIO_BUFFER=y
-CONFIG_IIO_SW_RING=y
-CONFIG_IIO_KFIFO_BUF=y
-# CONFIG_IOMMU_SUPPORT is not set
-CONFIG_PM_DEVFREQ=y
-CONFIG_DEVFREQ_GOV_USERSPACE=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_FANOTIFY=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_NETWORK_FILESYSTEMS is not set
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=y
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_SCHEDSTATS=y
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_LL=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_DEBUG_JTAG_ENABLE=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set

board/boundarydevices/nitrogen6x/post-build.sh

@@ -1,18 +0,0 @@
-#!/bin/sh
-# post-build fixups
-# for furthe details, see
-# http://boundarydevices.com/u-boot-conventions-for-i-mx6-nitrogen6x-and-sabrelite/
-
-TARGET_DIR=$1
-IMAGES_DIR=$1/../images
-BOARD_DIR="$(dirname $0)"
-
-# bd u-boot looks for bootscript here
-cp $BOARD_DIR/6q_bootscript $TARGET_DIR
-
-# u-boot / update script for bd upgradeu command
-if [ -e $IMAGES_DIR/u-boot.bin ];
-then
-    cp $IMAGES_DIR/u-boot.bin $TARGET_DIR
-    cp $BOARD_DIR/6q_upgrade $TARGET_DIR
-fi

board/boundarydevices/nitrogen6x/readme.txt

@@ -1,9 +0,0 @@
-Buildroot for Boundary Devices Nitrogen6X:
-
-http://boundarydevices.com/products/nitrogen6x-board-imx6-arm-cortex-a9-sbc/
-
-To install, simply extract rootfs.ext2 to first partition of a uSD card:
-
-sudo dd if=output/images/rootfs.ext2 of=/dev/sdX1
-
-Where 'sdX1' is the device node of the uSD partition.

board/calao/qil-a9260/at91bootstrap-1.16-qil-a9260.patch

@@ -1,603 +0,0 @@
-From a3e08beea8bf5e96e1237eef4a82f4a2fdd5286b Mon Sep 17 00:00:00 2001
-From: Gregory Hermant <gregory.hermant@calao-systems.com>
-Date: Thu, 19 Jul 2012 14:19:59 +0200
-Subject: [PATCH] Add support for the Calao-systems QIL-A9260
-
-
-Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
----
- board/qil_a9260/nandflash/Makefile    |  122 ++++++++++++++
- board/qil_a9260/nandflash/qil-a9260.h |  109 ++++++++++++
- board/qil_a9260/qil_a9260.c           |  298 +++++++++++++++++++++++++++++++++
- crt0_gnu.S                            |    7 +
- include/part.h                        |    6 +-
- 5 files changed, 541 insertions(+), 1 deletions(-)
- create mode 100644 board/qil_a9260/nandflash/Makefile
- create mode 100644 board/qil_a9260/nandflash/qil-a9260.h
- create mode 100644 board/qil_a9260/qil_a9260.c
-
-diff --git a/board/qil_a9260/nandflash/Makefile b/board/qil_a9260/nandflash/Makefile
-new file mode 100644
-index 0000000..209a25f
---- /dev/null
-+++ b/board/qil_a9260/nandflash/Makefile
-@@ -0,0 +1,122 @@
-+# TODO: set this appropriately for your local toolchain
-+ifndef ERASE_FCT
-+ERASE_FCT=rm -f
-+endif
-+ifndef CROSS_COMPILE
-+CROSS_COMPILE=arm-elf-
-+endif
-+
-+TOOLCHAIN=gcc
-+
-+BOOTSTRAP_PATH=../../..
-+
-+# NandFlashBoot Configuration for QIL-A9260
-+
-+# Target name (case sensitive!!!)
-+TARGET=AT91SAM9260
-+# Board name (case sensitive!!!)
-+BOARD=qil_a9260
-+# Link Address and Top_of_Memory
-+LINK_ADDR=0x200000
-+TOP_OF_MEMORY=0x301000
-+# Name of current directory
-+PROJECT=nandflash
-+
-+ifndef BOOT_NAME
-+BOOT_NAME=$(PROJECT)_$(BOARD)
-+endif
-+
-+INCL=./$(BOOTSTRAP_PATH)/board/$(BOARD)/$(PROJECT)
-+
-+ifeq ($(TOOLCHAIN), gcc)
-+
-+AS=$(CROSS_COMPILE)gcc
-+CC=$(CROSS_COMPILE)gcc
-+LD=$(CROSS_COMPILE)gcc
-+NM= $(CROSS_COMPILE)nm
-+SIZE=$(CROSS_COMPILE)size
-+OBJCOPY=$(CROSS_COMPILE)objcopy
-+OBJDUMP=$(CROSS_COMPILE)objdump
-+CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL)
-+ASFLAGS=-g -mcpu=arm926ej-s -c -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
-+
-+# Linker flags.
-+#  -Wl,...:     tell GCC to pass this to linker.
-+#    -Map:      create map file
-+#    --cref:    add cross reference to map file
-+LDFLAGS+=-nostartfiles -nostdlib -Wl,-Map=$(BOOT_NAME).map,--cref
-+LDFLAGS+=-T $(BOOTSTRAP_PATH)/elf32-littlearm.lds -Ttext $(LINK_ADDR)
-+OBJS=crt0_gnu.o
-+
-+endif
-+
-+OBJS+=\
-+	$(BOARD).o \
-+	main.o \
-+	gpio.o \
-+	pmc.o \
-+	debug.o \
-+	sdramc.o \
-+	nandflash.o \
-+	_udivsi3.o \
-+	_umodsi3.o \
-+	div0.o \
-+	udiv.o \
-+	string.o
-+
-+
-+rebuild: clean all
-+
-+all: 	$(BOOT_NAME)
-+
-+ifeq ($(TOOLCHAIN), gcc)
-+$(BOOT_NAME): $(OBJS)
-+	$(LD) $(LDFLAGS) -n -o $(BOOT_NAME).elf $(OBJS)
-+	$(OBJCOPY) --strip-debug --strip-unneeded $(BOOT_NAME).elf -O binary $(BOOT_NAME).bin
-+endif
-+
-+
-+$(BOARD).o: $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c -o $(BOARD).o
-+
-+main.o: $(BOOTSTRAP_PATH)/main.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/main.c -o main.o
-+
-+gpio.o: $(BOOTSTRAP_PATH)/driver/gpio.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/gpio.c -o gpio.o
-+
-+pmc.o:  $(BOOTSTRAP_PATH)/driver/pmc.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/pmc.c -o pmc.o
-+
-+debug.o: $(BOOTSTRAP_PATH)/driver/debug.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/debug.c -o debug.o
-+
-+sdramc.o:  $(BOOTSTRAP_PATH)/driver/sdramc.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/sdramc.c -o sdramc.o
-+
-+dataflash.o:  $(BOOTSTRAP_PATH)/driver/dataflash.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/dataflash.c -o dataflash.o
-+
-+nandflash.o:  $(BOOTSTRAP_PATH)/driver/nandflash.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/nandflash.c -o nandflash.o
-+
-+crt0_gnu.o:  $(BOOTSTRAP_PATH)/crt0_gnu.S
-+	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/crt0_gnu.S -o crt0_gnu.o
-+
-+div0.o:  $(BOOTSTRAP_PATH)/lib/div0.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/div0.c -o div0.o
-+
-+string.o:  $(BOOTSTRAP_PATH)/lib/string.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/string.c -o string.o
-+
-+udiv.o:  $(BOOTSTRAP_PATH)/lib/udiv.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/udiv.c -o udiv.o
-+
-+_udivsi3.o:  $(BOOTSTRAP_PATH)/lib/_udivsi3.S
-+	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_udivsi3.S -o _udivsi3.o
-+
-+_umodsi3.o:  $(BOOTSTRAP_PATH)/lib/_umodsi3.S
-+	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_umodsi3.S -o _umodsi3.o
-+
-+clean:
-+	$(ERASE_FCT) *.o *.bin *.elf *.map
-diff --git a/board/qil_a9260/nandflash/qil-a9260.h b/board/qil_a9260/nandflash/qil-a9260.h
-new file mode 100644
-index 0000000..c87002e
---- /dev/null
-+++ b/board/qil_a9260/nandflash/qil-a9260.h
-@@ -0,0 +1,109 @@
-+/* ----------------------------------------------------------------------------
-+ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
-+ * ----------------------------------------------------------------------------
-+ * Copyright (c) 2006, Atmel Corporation
-+
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *
-+ * - Redistributions of source code must retain the above copyright notice,
-+ * this list of conditions and the disclaimer below.
-+ *
-+ * Atmel's name may not be used to endorse or promote products derived from
-+ * this software without specific prior written permission.
-+ *
-+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
-+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
-+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
-+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
-+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ * ----------------------------------------------------------------------------
-+ * File Name           : qil-a9260.h
-+ * Object              :
-+ * Creation            : GH July 19th 2012
-+ *-----------------------------------------------------------------------------
-+ */
-+#ifndef _QIL_A9260_H
-+#define _QIL_A9260_H
-+
-+/* ******************************************************************* */
-+/* PMC Settings                                                        */
-+/*                                                                     */
-+/* The main oscillator is enabled as soon as possible in the c_startup */
-+/* and MCK is switched on the main oscillator.                         */
-+/* PLL initialization is done later in the hw_init() function          */
-+/* ******************************************************************* */
-+#define MASTER_CLOCK		(180000000/2)
-+#define PLL_LOCK_TIMEOUT	1000000
-+
-+#define PLLA_SETTINGS	0x20593F06
-+#define PLLB_SETTINGS	0x10483F0E
-+
-+/* Switch MCK on PLLA output PCK = PLLA = 2 * MCK */
-+#define MCKR_SETTINGS		(AT91C_PMC_PRES_CLK | AT91C_PMC_MDIV_2)
-+#define MCKR_CSS_SETTINGS	(AT91C_PMC_CSS_PLLA_CLK | MCKR_SETTINGS)
-+
-+/* ******************************************************************* */
-+/* NandFlash Settings                                                  */
-+/*                                                                     */
-+/* ******************************************************************* */
-+#define AT91C_SMARTMEDIA_BASE	0x40000000
-+
-+#define AT91_SMART_MEDIA_ALE    (1 << 21)	/* our ALE is AD21 */
-+#define AT91_SMART_MEDIA_CLE    (1 << 22)	/* our CLE is AD22 */
-+
-+#define NAND_DISABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_SODR = AT91C_PIO_PC14;} while(0)
-+#define NAND_ENABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_CODR = AT91C_PIO_PC14;} while(0)
-+
-+#define NAND_WAIT_READY() while (!(*(volatile unsigned int *)AT91C_PIOC_PDSR & AT91C_PIO_PC13))
-+
-+
-+/* ******************************************************************** */
-+/* SMC Chip Select 3 Timings for NandFlash for MASTER_CLOCK = 90000000.*/
-+/* Please refer to SMC section in AT91SAM datasheet to learn how 	*/
-+/* to generate these values. 						*/
-+/* ******************************************************************** */
-+#define AT91C_SM_NWE_SETUP	(1 << 0)
-+#define AT91C_SM_NCS_WR_SETUP	(0 << 8)
-+#define AT91C_SM_NRD_SETUP	(1 << 16)
-+#define AT91C_SM_NCS_RD_SETUP	(0 << 24)
-+  
-+#define AT91C_SM_NWE_PULSE 	(3 << 0)
-+#define AT91C_SM_NCS_WR_PULSE	(3 << 8)
-+#define AT91C_SM_NRD_PULSE	(3 << 16)
-+#define AT91C_SM_NCS_RD_PULSE	(3 << 24)
-+  
-+#define AT91C_SM_NWE_CYCLE 	(5 << 0)
-+#define AT91C_SM_NRD_CYCLE	(5 << 16)
-+#define AT91C_SM_TDF	        (2 << 16)
-+
-+/* ******************************************************************* */
-+/* BootStrap Settings                                                  */
-+/*                                                                     */
-+/* ******************************************************************* */
-+#define IMG_ADDRESS 		0x20000		/* Image Address in NandFlash */
-+#define	IMG_SIZE		0x40000		/* Image Size in NandFlash    */
-+
-+#define MACH_TYPE       	0x6AF		/* QIL-A9260 */
-+#define JUMP_ADDR		0x23F00000	/* Final Jump Address 	      */
-+
-+/* ******************************************************************* */
-+/* Application Settings                                                */
-+/* ******************************************************************* */
-+#undef CFG_DEBUG
-+#undef CFG_DATAFLASH
-+
-+#define CFG_NANDFLASH
-+#undef	NANDFLASH_SMALL_BLOCKS	/* NANDFLASH_LARGE_BLOCKS used instead */
-+
-+#define CFG_HW_INIT
-+#define CFG_SDRAM
-+
-+#endif	/* _QIL_A9260_H */
-diff --git a/board/qil_a9260/qil_a9260.c b/board/qil_a9260/qil_a9260.c
-new file mode 100644
-index 0000000..ae122e7
---- /dev/null
-+++ b/board/qil_a9260/qil_a9260.c
-@@ -0,0 +1,298 @@
-+/* ----------------------------------------------------------------------------
-+ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
-+ * ----------------------------------------------------------------------------
-+ * Copyright (c) 2006, Atmel Corporation
-+
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *
-+ * - Redistributions of source code must retain the above copyright notice,
-+ * this list of conditions and the disclaiimer below.
-+ *
-+ * Atmel's name may not be used to endorse or promote products derived from
-+ * this software without specific prior written permission.
-+ *
-+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
-+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
-+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
-+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
-+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ * ----------------------------------------------------------------------------
-+ * File Name           : qil_a9260.c
-+ * Object              :
-+ * Creation            : GH July 19th 2012
-+ *-----------------------------------------------------------------------------
-+ */
-+#include "../../include/part.h"
-+#include "../../include/gpio.h"
-+#include "../../include/pmc.h"
-+#include "../../include/debug.h"
-+#include "../../include/sdramc.h"
-+#include "../../include/main.h"
-+#ifdef CFG_NANDFLASH
-+#include "../../include/nandflash.h"
-+#endif
-+#ifdef CFG_DATAFLASH
-+#include "../../include/dataflash.h"
-+#endif
-+
-+static inline unsigned int get_cp15(void)
-+{
-+	unsigned int value;
-+	__asm__("mrc p15, 0, %0, c1, c0, 0" : "=r" (value));
-+	return value;
-+}
-+
-+static inline void set_cp15(unsigned int value)
-+{
-+	__asm__("mcr p15, 0, %0, c1, c0, 0" : : "r" (value));
-+}
-+
-+#ifdef CFG_HW_INIT
-+/*----------------------------------------------------------------------------*/
-+/* \fn    hw_init							      */
-+/* \brief This function performs very low level HW initialization	      */
-+/* This function is invoked as soon as possible during the c_startup	      */
-+/* The bss segment must be initialized					      */
-+/*----------------------------------------------------------------------------*/
-+void hw_init(void)
-+{
-+	unsigned int cp15;
-+	
-+	/* Configure PIOs */
-+	const struct pio_desc hw_pio[] = {
-+#ifdef CFG_DEBUG
-+		{"RXD", AT91C_PIN_PB(14), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"TXD", AT91C_PIN_PB(15), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+#endif
-+		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
-+	};
-+
-+	/* Disable watchdog */
-+	writel(AT91C_WDTC_WDDIS, AT91C_BASE_WDTC + WDTC_WDMR);
-+
-+	/* At this stage the main oscillator is supposed to be enabled
-+	 * PCK = MCK = MOSC */
-+
-+	/* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */
-+	pmc_cfg_plla(PLLA_SETTINGS, PLL_LOCK_TIMEOUT);
-+
-+	/* PCK = PLLA = 2 * MCK */
-+	pmc_cfg_mck(MCKR_SETTINGS, PLL_LOCK_TIMEOUT);
-+	/* Switch MCK on PLLA output */
-+	pmc_cfg_mck(MCKR_CSS_SETTINGS, PLL_LOCK_TIMEOUT);
-+
-+	/* Configure PLLB */
-+	pmc_cfg_pllb(PLLB_SETTINGS, PLL_LOCK_TIMEOUT);
-+
-+	/* Configure CP15 */
-+	cp15 = get_cp15();
-+	cp15 |= I_CACHE;
-+	set_cp15(cp15);
-+
-+	/* Configure the PIO controller */
-+	pio_setup(hw_pio);
-+
-+	/* Configure the EBI Slave Slot Cycle to 64 */
-+	writel( (readl((AT91C_BASE_MATRIX + MATRIX_SCFG3)) & ~0xFF) | 0x40, (AT91C_BASE_MATRIX + MATRIX_SCFG3));
-+
-+#ifdef CFG_DEBUG
-+	/* Enable Debug messages on the DBGU */
-+	dbg_init(BAUDRATE(MASTER_CLOCK, 115200));
-+
-+	dbg_print("Start AT91Bootstrap...\n\r");
-+#endif /* CFG_DEBUG */
-+
-+#ifdef CFG_SDRAM
-+	/* Initialize the matrix */
-+	writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) | AT91C_EBI_CS1A_SDRAMC, AT91C_BASE_CCFG + CCFG_EBICSA);
-+
-+	/* Configure SDRAM Controller */
-+	sdram_init(	AT91C_SDRAMC_NC_9  |
-+				AT91C_SDRAMC_NR_13 |
-+				AT91C_SDRAMC_CAS_2 |
-+				AT91C_SDRAMC_NB_4_BANKS |
-+				AT91C_SDRAMC_DBW_32_BITS |
-+				AT91C_SDRAMC_TWR_2 |
-+				AT91C_SDRAMC_TRC_7 |
-+				AT91C_SDRAMC_TRP_2 |
-+				AT91C_SDRAMC_TRCD_2 |
-+				AT91C_SDRAMC_TRAS_5 |
-+				AT91C_SDRAMC_TXSR_8,		/* Control Register */
-+				(MASTER_CLOCK * 7)/1000000,	/* Refresh Timer Register */
-+				AT91C_SDRAMC_MD_SDRAM);		/* SDRAM (no low power)   */ 
-+
-+
-+#endif /* CFG_SDRAM */
-+}
-+#endif /* CFG_HW_INIT */
-+
-+#ifdef CFG_SDRAM
-+/*------------------------------------------------------------------------------*/
-+/* \fn    sdramc_hw_init							*/
-+/* \brief This function performs SDRAMC HW initialization			*/
-+/*------------------------------------------------------------------------------*/
-+void sdramc_hw_init(void)
-+{
-+	/* Configure PIOs */
-+/*	const struct pio_desc sdramc_pio[] = {
-+		{"D16", AT91C_PIN_PC(16), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D17", AT91C_PIN_PC(17), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D18", AT91C_PIN_PC(18), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D19", AT91C_PIN_PC(19), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D20", AT91C_PIN_PC(20), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D21", AT91C_PIN_PC(21), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D22", AT91C_PIN_PC(22), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D23", AT91C_PIN_PC(23), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D24", AT91C_PIN_PC(24), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D25", AT91C_PIN_PC(25), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D26", AT91C_PIN_PC(26), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D27", AT91C_PIN_PC(27), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D28", AT91C_PIN_PC(28), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D29", AT91C_PIN_PC(29), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D30", AT91C_PIN_PC(30), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D31", AT91C_PIN_PC(31), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
-+	};
-+*/
-+	/* Configure the SDRAMC PIO controller to output PCK0 */
-+/*	pio_setup(sdramc_pio); */
-+
-+	writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_ASR(0));
-+	writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_PDR(0));
-+
-+}
-+#endif /* CFG_SDRAM */
-+
-+#ifdef CFG_DATAFLASH
-+
-+/*------------------------------------------------------------------------------*/
-+/* \fn    df_recovery								*/
-+/* \brief This function erases DataFlash Page 0 if USR PB is pressed 		*/
-+/*        during boot sequence							*/
-+/*------------------------------------------------------------------------------*/
-+void df_recovery(AT91PS_DF pDf)
-+{
-+#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS0_DATAFLASH)
-+	/* Configure PIOs */
-+	const struct pio_desc usrpb_pio[] = {
-+		{"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
-+		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
-+	};
-+
-+	/* Configure the PIO controller */
-+	writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
-+	pio_setup(usrpb_pio);
-+	
-+	/* If USR PB is pressed during Boot sequence */
-+	/* Erase DataFlash Page 0*/
-+	if ( !pio_get_value(AT91C_PIN_PB(10)) )
-+		df_page_erase(pDf, 0);
-+#endif
-+}
-+
-+/*------------------------------------------------------------------------------*/
-+/* \fn    df_hw_init								*/
-+/* \brief This function performs DataFlash HW initialization			*/
-+/*------------------------------------------------------------------------------*/
-+void df_hw_init(void)
-+{
-+	/* Configure PIOs */
-+	const struct pio_desc df_pio[] = {
-+		{"MISO",  AT91C_PIN_PA(0), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"MOSI",  AT91C_PIN_PA(1), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"SPCK",  AT91C_PIN_PA(2), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS0_DATAFLASH)
-+		{"NPCS0", AT91C_PIN_PA(3), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+#endif
-+		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
-+	};
-+
-+	/* Configure the PIO controller */
-+	pio_setup(df_pio);
-+}
-+#endif /* CFG_DATAFLASH */
-+
-+
-+
-+#ifdef CFG_NANDFLASH
-+/*------------------------------------------------------------------------------*/
-+/* \fn    nand_recovery						*/
-+/* \brief This function erases NandFlash Block 0 if USR PB is pressed 		*/
-+/*        during boot sequence							*/
-+/*------------------------------------------------------------------------------*/
-+static void nand_recovery(void)
-+{
-+	/* Configure PIOs */
-+	const struct pio_desc usrpb_pio[] = {
-+		{"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
-+		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
-+	};
-+
-+	/* Configure the PIO controller */
-+	writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
-+	pio_setup(usrpb_pio);
-+	
-+	/* If USR PB is pressed during Boot sequence */
-+	/* Erase NandFlash block 0*/
-+	if (!pio_get_value(AT91C_PIN_PB(10)) )
-+		AT91F_NandEraseBlock0();
-+}
-+
-+/*------------------------------------------------------------------------------*/
-+/* \fn    nandflash_hw_init							*/
-+/* \brief NandFlash HW init							*/
-+/*------------------------------------------------------------------------------*/
-+void nandflash_hw_init(void)
-+{
-+	/* Configure PIOs */
-+	const struct pio_desc nand_pio[] = {
-+		{"RDY_BSY", AT91C_PIN_PC(13), 0, PIO_PULLUP, PIO_INPUT},
-+		{"NANDCS",  AT91C_PIN_PC(14), 0, PIO_PULLUP, PIO_OUTPUT},
-+		{(char *) 0, 0, 0,  PIO_DEFAULT, PIO_PERIPH_A},
-+	};
-+
-+	/* Setup Smart Media, first enable the address range of CS3 in HMATRIX user interface */
-+	writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) | AT91C_EBI_CS3A_SM, AT91C_BASE_CCFG + CCFG_EBICSA);
-+		    
-+	/* Configure SMC CS3 */
-+ 	writel((AT91C_SM_NWE_SETUP | AT91C_SM_NCS_WR_SETUP | AT91C_SM_NRD_SETUP | AT91C_SM_NCS_RD_SETUP), AT91C_BASE_SMC + SMC_SETUP3);
-+  	writel((AT91C_SM_NWE_PULSE | AT91C_SM_NCS_WR_PULSE | AT91C_SM_NRD_PULSE | AT91C_SM_NCS_RD_PULSE), AT91C_BASE_SMC + SMC_PULSE3);
-+	writel((AT91C_SM_NWE_CYCLE | AT91C_SM_NRD_CYCLE)						, AT91C_BASE_SMC + SMC_CYCLE3);
-+	writel((AT91C_SMC_READMODE | AT91C_SMC_WRITEMODE | AT91C_SMC_NWAITM_NWAIT_DISABLE | 
-+  		AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS | AT91C_SM_TDF)						, AT91C_BASE_SMC + SMC_CTRL3);
-+
-+	/* Configure the PIO controller */
-+	writel((1 << AT91C_ID_PIOC), PMC_PCER + AT91C_BASE_PMC);
-+	pio_setup(nand_pio);
-+	
-+	nand_recovery();
-+}
-+
-+/*------------------------------------------------------------------------------*/
-+/* \fn    nandflash_cfg_16bits_dbw_init						*/
-+/* \brief Configure SMC in 16 bits mode						*/
-+/*------------------------------------------------------------------------------*/
-+void nandflash_cfg_16bits_dbw_init(void)
-+{
-+	writel(readl(AT91C_BASE_SMC + SMC_CTRL3) | AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS, AT91C_BASE_SMC + SMC_CTRL3);
-+}
-+
-+/*------------------------------------------------------------------------------*/
-+/* \fn    nandflash_cfg_8bits_dbw_init						*/
-+/* \brief Configure SMC in 8 bits mode						*/
-+/*------------------------------------------------------------------------------*/
-+void nandflash_cfg_8bits_dbw_init(void)
-+{
-+	writel((readl(AT91C_BASE_SMC + SMC_CTRL3) & ~(AT91C_SMC_DBW)) | AT91C_SMC_DBW_WIDTH_EIGTH_BITS, AT91C_BASE_SMC + SMC_CTRL3);
-+}
-+
-+
-+#endif /* #ifdef CFG_NANDFLASH */
-diff --git a/crt0_gnu.S b/crt0_gnu.S
-index 042b617..002feef 100644
---- a/crt0_gnu.S
-+++ b/crt0_gnu.S
-@@ -106,6 +106,13 @@ _relocate_to_sram:
- #endif /* CFG_NORFLASH */
- 
- _setup_clocks:
-+/* Test if main osc is bypassed */
-+	ldr 	r0,=AT91C_PMC_MOR
-+	ldr 	r1, [r0]
-+	ldr 	r2,=AT91C_CKGR_OSCBYPASS 
-+	ands 	r1, r1, r2
-+	bne	_init_data	/* branch if OSCBYPASS=1 */
-+
- /* Test if main oscillator is enabled */
- 	ldr 	r0,=AT91C_PMC_SR
- 	ldr 	r1, [r0]
-diff --git a/include/part.h b/include/part.h
-index ba5985a..bbd33fe 100644
---- a/include/part.h
-+++ b/include/part.h
-@@ -35,7 +35,11 @@
- 
- #ifdef AT91SAM9260
- #include "AT91SAM9260_inc.h"
--#include "at91sam9260ek.h"
-+	#ifdef at91sam9260ek
-+	#include "at91sam9260ek.h"
-+	#elif qil_a9260
-+	#include "qil-a9260.h"
-+	#endif
- #endif
- 
- #ifdef AT91SAM9XE
--- 
-1.5.6.3
-

board/calao/qil-a9260/barebox-2012.07.0-qil-a9260.patch

@@ -1,36 +0,0 @@
-From d076aa6182dc6df6bb311e60bbddb03573b9483b Mon Sep 17 00:00:00 2001
-From: Gregory Hermant <gregory.hermant@calao-systems.com>
-Date: Fri, 3 Aug 2012 11:25:49 +0200
-Subject: [PATCH] Enable pull-up on Rx serial ports for the CALAO MB-QIL-A9260
-
-
-Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
----
- arch/arm/boards/qil-a9260/init.c |    6 ++++++
- 1 files changed, 6 insertions(+), 0 deletions(-)
-
-diff --git a/arch/arm/boards/qil-a9260/init.c b/arch/arm/boards/qil-a9260/init.c
-index 305d733..b43cace 100644
---- a/arch/arm/boards/qil-a9260/init.c
-+++ b/arch/arm/boards/qil-a9260/init.c
-@@ -196,11 +196,17 @@ device_initcall(qil_a9260_devices_init);
- static int qil_a9260_console_init(void)
- {
- 	at91_register_uart(0, 0);
-+	at91_set_A_periph(AT91_PIN_PB14, 1);    /* Enable pull-up on DRXD */
-+
- 	at91_register_uart(1, ATMEL_UART_CTS | ATMEL_UART_RTS
- 			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- 			   | ATMEL_UART_RI);
-+
- 	at91_register_uart(2, ATMEL_UART_CTS | ATMEL_UART_RTS);
-+	at91_set_A_periph(AT91_PIN_PB7, 1);	/* Enable pull-up on RXD1 */
-+
- 	at91_register_uart(3, ATMEL_UART_CTS | ATMEL_UART_RTS);
-+	at91_set_A_periph(AT91_PIN_PB9, 1);	/* Enable pull-up on RXD2 */
- 
- 	return 0;
- }
--- 
-1.5.6.3
-

board/calao/qil-a9260/linux-3.4.7.config

@@ -1,111 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9260=y
-CONFIG_MACH_QIL_A9260=y
-CONFIG_AT91_SLOW_CLOCK=y
-CONFIG_AT91_EARLY_USART0=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=64M console=ttyS1,115200"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_NETDEVICES=y
-CONFIG_MII=y
-CONFIG_MACB=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_EVBUG=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_MMC=y
-CONFIG_MMC_AT91=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_M41T94=y
-CONFIG_EXT2_FS=y
-CONFIG_FUSE_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_XATTR=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y

board/calao/qil-a9260/linux-3.4.7.patch

@@ -1,27 +0,0 @@
-From fe6432a9728b62bce3db73c5a4efe026018fd495 Mon Sep 17 00:00:00 2001
-From: Gregory Hermant <gregory.hermant@calao-systems.com>
-Date: Fri, 3 Aug 2012 16:45:37 +0200
-Subject: [PATCH] QIL-A9260: rtc modalias m41t48 renamed to rtc-m41t48
-
-
-Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
----
- arch/arm/mach-at91/board-qil-a9260.c |    2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
-diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
-index bf351e2..c0df05c 100644
---- a/arch/arm/mach-at91/board-qil-a9260.c
-+++ b/arch/arm/mach-at91/board-qil-a9260.c
-@@ -78,7 +78,7 @@ static struct at91_udc_data __initdata ek_udc_data = {
- static struct spi_board_info ek_spi_devices[] = {
- #if defined(CONFIG_RTC_DRV_M41T94)
- 	{	/* M41T94 RTC */
--		.modalias	= "m41t94",
-+		.modalias	= "rtc-m41t94",
- 		.chip_select	= 0,
- 		.max_speed_hz	= 1 * 1000 * 1000,
- 		.bus_num	= 0,
--- 
-1.5.6.3
-

board/calao/snowball/linux-3.4.patch

@@ -1,45 +0,0 @@
-From 3d1a9b44b9dcd2c0f5d54c09596c96c0524d8340 Mon Sep 17 00:00:00 2001
-From: Gregory Hermant <gregory.hermant@calao-systems.com>
-Date: Tue, 13 Nov 2012 11:47:41 +0100
-Subject: [PATCH] trace-debug[stm]: Fix for BT/WLAN instability
-
-Pins under mop500_ske_pins array are used for different
-functionalities in snowball. Ex: GPIO161 pin configured
-for keypad here must stay configured as GPIO alternate
-function for operating PMU_EN pin of BT/WLAN chip in snowball.
-So forbid configuring these pins, for snowball
-
-Signed-off-by: Rajanikanth H.V <rajanikanth.hv@stericsson.com>
-Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
----
- arch/arm/mach-ux500/board-mop500-stm.c |    7 +++++--
- 1 file changed, 5 insertions(+), 2 deletions(-)
-
-diff --git a/arch/arm/mach-ux500/board-mop500-stm.c b/arch/arm/mach-ux500/board-mop500-stm.c
-index 1bef2a0..532fb9e 100644
---- a/arch/arm/mach-ux500/board-mop500-stm.c
-+++ b/arch/arm/mach-ux500/board-mop500-stm.c
-@@ -121,7 +121,9 @@ static int stm_ste_disable_ape_on_mipi60(void)
- 	if (retval)
- 		STM_ERR("Failed to disable MIPI60\n");
- 	else {
--		retval = nmk_config_pins(ARRAY_AND_SIZE(mop500_ske_pins));
-+		if (!machine_is_snowball())
-+			retval = nmk_config_pins(
-+				ARRAY_AND_SIZE(mop500_ske_pins));
- 		if (retval)
- 			STM_ERR("Failed to enable SKE gpio\n");
- 	}
-@@ -314,7 +316,8 @@ static int stm_ste_connection(enum stm_connection_type con_type)
- 		/* Enable altC3 on GPIO70-74 (STMMOD) and GPIO75-76 (UARTMOD) */
- 		prcmu_enable_stm_mod_uart();
- 		/* Enable APE on MIPI60 */
--		retval = nmk_config_pins_sleep(ARRAY_AND_SIZE(mop500_ske_pins));
-+		if (!machine_is_snowball())
-+			retval = nmk_config_pins_sleep(ARRAY_AND_SIZE(mop500_ske_pins));
- 		if (retval)
- 			STM_ERR("Failed to disable SKE GPIO\n");
- 		else {
--- 
-1.7.9.5
-

board/calao/usb-a9260/at91bootstrap-1.16-usb-a9260.patch

@@ -1,603 +0,0 @@
-From 43e8c90f13806405bde8eaaf3a956d0ddc806f64 Mon Sep 17 00:00:00 2001
-From: Gregory Hermant <gregory.hermant@calao-systems.com>
-Date: Tue, 2 Oct 2012 09:19:15 +0200
-Subject: [PATCH] Add support for the USB-A9260
-
-
-Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
----
- board/usb_a9260/nandflash/Makefile    |  122 ++++++++++++++
- board/usb_a9260/nandflash/usb-a9260.h |  109 ++++++++++++
- board/usb_a9260/usb_a9260.c           |  298 +++++++++++++++++++++++++++++++++
- crt0_gnu.S                            |    7 +
- include/part.h                        |    6 +-
- 5 files changed, 541 insertions(+), 1 deletion(-)
- create mode 100644 board/usb_a9260/nandflash/Makefile
- create mode 100644 board/usb_a9260/nandflash/usb-a9260.h
- create mode 100644 board/usb_a9260/usb_a9260.c
-
-diff --git a/board/usb_a9260/nandflash/Makefile b/board/usb_a9260/nandflash/Makefile
-new file mode 100644
-index 0000000..02f4b50
---- /dev/null
-+++ b/board/usb_a9260/nandflash/Makefile
-@@ -0,0 +1,122 @@
-+# TODO: set this appropriately for your local toolchain
-+ifndef ERASE_FCT
-+ERASE_FCT=rm -f
-+endif
-+ifndef CROSS_COMPILE
-+CROSS_COMPILE=arm-elf-
-+endif
-+
-+TOOLCHAIN=gcc
-+
-+BOOTSTRAP_PATH=../../..
-+
-+# NandFlashBoot Configuration for USB-A9260
-+
-+# Target name (case sensitive!!!)
-+TARGET=AT91SAM9260
-+# Board name (case sensitive!!!)
-+BOARD=usb_a9260
-+# Link Address and Top_of_Memory
-+LINK_ADDR=0x200000
-+TOP_OF_MEMORY=0x301000
-+# Name of current directory
-+PROJECT=nandflash
-+
-+ifndef BOOT_NAME
-+BOOT_NAME=$(PROJECT)_$(BOARD)
-+endif
-+
-+INCL=./$(BOOTSTRAP_PATH)/board/$(BOARD)/$(PROJECT)
-+
-+ifeq ($(TOOLCHAIN), gcc)
-+
-+AS=$(CROSS_COMPILE)gcc
-+CC=$(CROSS_COMPILE)gcc
-+LD=$(CROSS_COMPILE)gcc
-+NM= $(CROSS_COMPILE)nm
-+SIZE=$(CROSS_COMPILE)size
-+OBJCOPY=$(CROSS_COMPILE)objcopy
-+OBJDUMP=$(CROSS_COMPILE)objdump
-+CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL)
-+ASFLAGS=-g -mcpu=arm926ej-s -c -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
-+
-+# Linker flags.
-+#  -Wl,...:     tell GCC to pass this to linker.
-+#    -Map:      create map file
-+#    --cref:    add cross reference to map file
-+LDFLAGS+=-nostartfiles -nostdlib -Wl,-Map=$(BOOT_NAME).map,--cref
-+LDFLAGS+=-T $(BOOTSTRAP_PATH)/elf32-littlearm.lds -Ttext $(LINK_ADDR)
-+OBJS=crt0_gnu.o
-+
-+endif
-+
-+OBJS+=\
-+	$(BOARD).o \
-+	main.o \
-+	gpio.o \
-+	pmc.o \
-+	debug.o \
-+	sdramc.o \
-+	nandflash.o \
-+	_udivsi3.o \
-+	_umodsi3.o \
-+	div0.o \
-+	udiv.o \
-+	string.o
-+
-+
-+rebuild: clean all
-+
-+all: 	$(BOOT_NAME)
-+
-+ifeq ($(TOOLCHAIN), gcc)
-+$(BOOT_NAME): $(OBJS)
-+	$(LD) $(LDFLAGS) -n -o $(BOOT_NAME).elf $(OBJS)
-+	$(OBJCOPY) --strip-debug --strip-unneeded $(BOOT_NAME).elf -O binary $(BOOT_NAME).bin
-+endif
-+
-+
-+$(BOARD).o: $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c -o $(BOARD).o
-+
-+main.o: $(BOOTSTRAP_PATH)/main.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/main.c -o main.o
-+
-+gpio.o: $(BOOTSTRAP_PATH)/driver/gpio.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/gpio.c -o gpio.o
-+
-+pmc.o:  $(BOOTSTRAP_PATH)/driver/pmc.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/pmc.c -o pmc.o
-+
-+debug.o: $(BOOTSTRAP_PATH)/driver/debug.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/debug.c -o debug.o
-+
-+sdramc.o:  $(BOOTSTRAP_PATH)/driver/sdramc.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/sdramc.c -o sdramc.o
-+
-+dataflash.o:  $(BOOTSTRAP_PATH)/driver/dataflash.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/dataflash.c -o dataflash.o
-+
-+nandflash.o:  $(BOOTSTRAP_PATH)/driver/nandflash.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/nandflash.c -o nandflash.o
-+
-+crt0_gnu.o:  $(BOOTSTRAP_PATH)/crt0_gnu.S
-+	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/crt0_gnu.S -o crt0_gnu.o
-+
-+div0.o:  $(BOOTSTRAP_PATH)/lib/div0.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/div0.c -o div0.o
-+
-+string.o:  $(BOOTSTRAP_PATH)/lib/string.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/string.c -o string.o
-+
-+udiv.o:  $(BOOTSTRAP_PATH)/lib/udiv.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/udiv.c -o udiv.o
-+
-+_udivsi3.o:  $(BOOTSTRAP_PATH)/lib/_udivsi3.S
-+	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_udivsi3.S -o _udivsi3.o
-+
-+_umodsi3.o:  $(BOOTSTRAP_PATH)/lib/_umodsi3.S
-+	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_umodsi3.S -o _umodsi3.o
-+
-+clean:
-+	$(ERASE_FCT) *.o *.bin *.elf *.map
-diff --git a/board/usb_a9260/nandflash/usb-a9260.h b/board/usb_a9260/nandflash/usb-a9260.h
-new file mode 100644
-index 0000000..2aaf759
---- /dev/null
-+++ b/board/usb_a9260/nandflash/usb-a9260.h
-@@ -0,0 +1,109 @@
-+/* ----------------------------------------------------------------------------
-+ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
-+ * ----------------------------------------------------------------------------
-+ * Copyright (c) 2006, Atmel Corporation
-+
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *
-+ * - Redistributions of source code must retain the above copyright notice,
-+ * this list of conditions and the disclaimer below.
-+ *
-+ * Atmel's name may not be used to endorse or promote products derived from
-+ * this software without specific prior written permission.
-+ *
-+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
-+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
-+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
-+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
-+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ * ----------------------------------------------------------------------------
-+ * File Name           : usb-a9260.h
-+ * Object              :
-+ * Creation            : GH Oct 1th 2012
-+ *-----------------------------------------------------------------------------
-+ */
-+#ifndef _USB_A9260_H
-+#define _USB_A9260_H
-+
-+/* ******************************************************************* */
-+/* PMC Settings                                                        */
-+/*                                                                     */
-+/* The main oscillator is enabled as soon as possible in the c_startup */
-+/* and MCK is switched on the main oscillator.                         */
-+/* PLL initialization is done later in the hw_init() function          */
-+/* ******************************************************************* */
-+#define MASTER_CLOCK		(180000000/2)
-+#define PLL_LOCK_TIMEOUT	1000000
-+
-+#define PLLA_SETTINGS	0x20593F06
-+#define PLLB_SETTINGS	0x10483F0E
-+
-+/* Switch MCK on PLLA output PCK = PLLA = 2 * MCK */
-+#define MCKR_SETTINGS		(AT91C_PMC_PRES_CLK | AT91C_PMC_MDIV_2)
-+#define MCKR_CSS_SETTINGS	(AT91C_PMC_CSS_PLLA_CLK | MCKR_SETTINGS)
-+
-+/* ******************************************************************* */
-+/* NandFlash Settings                                                  */
-+/*                                                                     */
-+/* ******************************************************************* */
-+#define AT91C_SMARTMEDIA_BASE	0x40000000
-+
-+#define AT91_SMART_MEDIA_ALE    (1 << 21)	/* our ALE is AD21 */
-+#define AT91_SMART_MEDIA_CLE    (1 << 22)	/* our CLE is AD22 */
-+
-+#define NAND_DISABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_SODR = AT91C_PIO_PC14;} while(0)
-+#define NAND_ENABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_CODR = AT91C_PIO_PC14;} while(0)
-+
-+#define NAND_WAIT_READY() while (!(*(volatile unsigned int *)AT91C_PIOC_PDSR & AT91C_PIO_PC13))
-+
-+
-+/* ******************************************************************** */
-+/* SMC Chip Select 3 Timings for NandFlash for MASTER_CLOCK = 90000000.*/
-+/* Please refer to SMC section in AT91SAM datasheet to learn how 	*/
-+/* to generate these values. 						*/
-+/* ******************************************************************** */
-+#define AT91C_SM_NWE_SETUP	(1 << 0)
-+#define AT91C_SM_NCS_WR_SETUP	(0 << 8)
-+#define AT91C_SM_NRD_SETUP	(1 << 16)
-+#define AT91C_SM_NCS_RD_SETUP	(0 << 24)
-+  
-+#define AT91C_SM_NWE_PULSE 	(3 << 0)
-+#define AT91C_SM_NCS_WR_PULSE	(3 << 8)
-+#define AT91C_SM_NRD_PULSE	(3 << 16)
-+#define AT91C_SM_NCS_RD_PULSE	(3 << 24)
-+  
-+#define AT91C_SM_NWE_CYCLE 	(5 << 0)
-+#define AT91C_SM_NRD_CYCLE	(5 << 16)
-+#define AT91C_SM_TDF	        (2 << 16)
-+
-+/* ******************************************************************* */
-+/* BootStrap Settings                                                  */
-+/*                                                                     */
-+/* ******************************************************************* */
-+#define IMG_ADDRESS 		0x20000		/* Image Address in NandFlash */
-+#define	IMG_SIZE		0x40000		/* Image Size in NandFlash    */
-+
-+#define MACH_TYPE       	0x6AD		/* USB-A9260 */
-+#define JUMP_ADDR		0x23F00000	/* Final Jump Address 	      */
-+
-+/* ******************************************************************* */
-+/* Application Settings                                                */
-+/* ******************************************************************* */
-+#undef CFG_DEBUG
-+#undef CFG_DATAFLASH
-+
-+#define CFG_NANDFLASH
-+#undef	NANDFLASH_SMALL_BLOCKS	/* NANDFLASH_LARGE_BLOCKS used instead */
-+
-+#define CFG_HW_INIT
-+#define CFG_SDRAM
-+
-+#endif	/* _USB_A9260_H */
-diff --git a/board/usb_a9260/usb_a9260.c b/board/usb_a9260/usb_a9260.c
-new file mode 100644
-index 0000000..de30f0b
---- /dev/null
-+++ b/board/usb_a9260/usb_a9260.c
-@@ -0,0 +1,298 @@
-+/* ----------------------------------------------------------------------------
-+ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
-+ * ----------------------------------------------------------------------------
-+ * Copyright (c) 2006, Atmel Corporation
-+
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *
-+ * - Redistributions of source code must retain the above copyright notice,
-+ * this list of conditions and the disclaiimer below.
-+ *
-+ * Atmel's name may not be used to endorse or promote products derived from
-+ * this software without specific prior written permission.
-+ *
-+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
-+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
-+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
-+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
-+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ * ----------------------------------------------------------------------------
-+ * File Name           : usb_a9260.c
-+ * Object              :
-+ * Creation            : GH Oct 1th 2012
-+ *-----------------------------------------------------------------------------
-+ */
-+#include "../../include/part.h"
-+#include "../../include/gpio.h"
-+#include "../../include/pmc.h"
-+#include "../../include/debug.h"
-+#include "../../include/sdramc.h"
-+#include "../../include/main.h"
-+#ifdef CFG_NANDFLASH
-+#include "../../include/nandflash.h"
-+#endif
-+#ifdef CFG_DATAFLASH
-+#include "../../include/dataflash.h"
-+#endif
-+
-+static inline unsigned int get_cp15(void)
-+{
-+	unsigned int value;
-+	__asm__("mrc p15, 0, %0, c1, c0, 0" : "=r" (value));
-+	return value;
-+}
-+
-+static inline void set_cp15(unsigned int value)
-+{
-+	__asm__("mcr p15, 0, %0, c1, c0, 0" : : "r" (value));
-+}
-+
-+#ifdef CFG_HW_INIT
-+/*----------------------------------------------------------------------------*/
-+/* \fn    hw_init							      */
-+/* \brief This function performs very low level HW initialization	      */
-+/* This function is invoked as soon as possible during the c_startup	      */
-+/* The bss segment must be initialized					      */
-+/*----------------------------------------------------------------------------*/
-+void hw_init(void)
-+{
-+	unsigned int cp15;
-+	
-+	/* Configure PIOs */
-+	const struct pio_desc hw_pio[] = {
-+#ifdef CFG_DEBUG
-+		{"RXD", AT91C_PIN_PB(14), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"TXD", AT91C_PIN_PB(15), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+#endif
-+		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
-+	};
-+
-+	/* Disable watchdog */
-+	writel(AT91C_WDTC_WDDIS, AT91C_BASE_WDTC + WDTC_WDMR);
-+
-+	/* At this stage the main oscillator is supposed to be enabled
-+	 * PCK = MCK = MOSC */
-+
-+	/* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */
-+	pmc_cfg_plla(PLLA_SETTINGS, PLL_LOCK_TIMEOUT);
-+
-+	/* PCK = PLLA = 2 * MCK */
-+	pmc_cfg_mck(MCKR_SETTINGS, PLL_LOCK_TIMEOUT);
-+	/* Switch MCK on PLLA output */
-+	pmc_cfg_mck(MCKR_CSS_SETTINGS, PLL_LOCK_TIMEOUT);
-+
-+	/* Configure PLLB */
-+	pmc_cfg_pllb(PLLB_SETTINGS, PLL_LOCK_TIMEOUT);
-+
-+	/* Configure CP15 */
-+	cp15 = get_cp15();
-+	cp15 |= I_CACHE;
-+	set_cp15(cp15);
-+
-+	/* Configure the PIO controller */
-+	pio_setup(hw_pio);
-+
-+	/* Configure the EBI Slave Slot Cycle to 64 */
-+	writel( (readl((AT91C_BASE_MATRIX + MATRIX_SCFG3)) & ~0xFF) | 0x40, (AT91C_BASE_MATRIX + MATRIX_SCFG3));
-+
-+#ifdef CFG_DEBUG
-+	/* Enable Debug messages on the DBGU */
-+	dbg_init(BAUDRATE(MASTER_CLOCK, 115200));
-+
-+	dbg_print("Start AT91Bootstrap...\n\r");
-+#endif /* CFG_DEBUG */
-+
-+#ifdef CFG_SDRAM
-+	/* Initialize the matrix */
-+	writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) | AT91C_EBI_CS1A_SDRAMC, AT91C_BASE_CCFG + CCFG_EBICSA);
-+
-+	/* Configure SDRAM Controller */
-+	sdram_init(	AT91C_SDRAMC_NC_9  |
-+				AT91C_SDRAMC_NR_13 |
-+				AT91C_SDRAMC_CAS_2 |
-+				AT91C_SDRAMC_NB_4_BANKS |
-+				AT91C_SDRAMC_DBW_32_BITS |
-+				AT91C_SDRAMC_TWR_2 |
-+				AT91C_SDRAMC_TRC_7 |
-+				AT91C_SDRAMC_TRP_2 |
-+				AT91C_SDRAMC_TRCD_2 |
-+				AT91C_SDRAMC_TRAS_5 |
-+				AT91C_SDRAMC_TXSR_8,		/* Control Register */
-+				(MASTER_CLOCK * 7)/1000000,	/* Refresh Timer Register */
-+				AT91C_SDRAMC_MD_SDRAM);		/* SDRAM (no low power)   */ 
-+
-+
-+#endif /* CFG_SDRAM */
-+}
-+#endif /* CFG_HW_INIT */
-+
-+#ifdef CFG_SDRAM
-+/*------------------------------------------------------------------------------*/
-+/* \fn    sdramc_hw_init							*/
-+/* \brief This function performs SDRAMC HW initialization			*/
-+/*------------------------------------------------------------------------------*/
-+void sdramc_hw_init(void)
-+{
-+	/* Configure PIOs */
-+/*	const struct pio_desc sdramc_pio[] = {
-+		{"D16", AT91C_PIN_PC(16), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D17", AT91C_PIN_PC(17), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D18", AT91C_PIN_PC(18), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D19", AT91C_PIN_PC(19), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D20", AT91C_PIN_PC(20), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D21", AT91C_PIN_PC(21), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D22", AT91C_PIN_PC(22), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D23", AT91C_PIN_PC(23), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D24", AT91C_PIN_PC(24), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D25", AT91C_PIN_PC(25), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D26", AT91C_PIN_PC(26), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D27", AT91C_PIN_PC(27), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D28", AT91C_PIN_PC(28), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D29", AT91C_PIN_PC(29), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D30", AT91C_PIN_PC(30), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D31", AT91C_PIN_PC(31), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
-+	};
-+*/
-+	/* Configure the SDRAMC PIO controller to output PCK0 */
-+/*	pio_setup(sdramc_pio); */
-+
-+	writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_ASR(0));
-+	writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_PDR(0));
-+
-+}
-+#endif /* CFG_SDRAM */
-+
-+#ifdef CFG_DATAFLASH
-+
-+/*------------------------------------------------------------------------------*/
-+/* \fn    df_recovery								*/
-+/* \brief This function erases DataFlash Page 0 if USR PB is pressed 		*/
-+/*        during boot sequence							*/
-+/*------------------------------------------------------------------------------*/
-+void df_recovery(AT91PS_DF pDf)
-+{
-+#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS0_DATAFLASH)
-+	/* Configure PIOs */
-+	const struct pio_desc usrpb_pio[] = {
-+		{"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
-+		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
-+	};
-+
-+	/* Configure the PIO controller */
-+	writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
-+	pio_setup(usrpb_pio);
-+	
-+	/* If USR PB is pressed during Boot sequence */
-+	/* Erase DataFlash Page 0*/
-+	if ( !pio_get_value(AT91C_PIN_PB(10)) )
-+		df_page_erase(pDf, 0);
-+#endif
-+}
-+
-+/*------------------------------------------------------------------------------*/
-+/* \fn    df_hw_init								*/
-+/* \brief This function performs DataFlash HW initialization			*/
-+/*------------------------------------------------------------------------------*/
-+void df_hw_init(void)
-+{
-+	/* Configure PIOs */
-+	const struct pio_desc df_pio[] = {
-+		{"MISO",  AT91C_PIN_PA(0), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"MOSI",  AT91C_PIN_PA(1), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"SPCK",  AT91C_PIN_PA(2), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS0_DATAFLASH)
-+		{"NPCS0", AT91C_PIN_PA(3), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+#endif
-+		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
-+	};
-+
-+	/* Configure the PIO controller */
-+	pio_setup(df_pio);
-+}
-+#endif /* CFG_DATAFLASH */
-+
-+
-+
-+#ifdef CFG_NANDFLASH
-+/*------------------------------------------------------------------------------*/
-+/* \fn    nand_recovery						*/
-+/* \brief This function erases NandFlash Block 0 if USR PB is pressed 		*/
-+/*        during boot sequence							*/
-+/*------------------------------------------------------------------------------*/
-+static void nand_recovery(void)
-+{
-+	/* Configure PIOs */
-+	const struct pio_desc usrpb_pio[] = {
-+		{"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
-+		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
-+	};
-+
-+	/* Configure the PIO controller */
-+	writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
-+	pio_setup(usrpb_pio);
-+	
-+	/* If USR PB is pressed during Boot sequence */
-+	/* Erase NandFlash block 0*/
-+	if (!pio_get_value(AT91C_PIN_PB(10)) )
-+		AT91F_NandEraseBlock0();
-+}
-+
-+/*------------------------------------------------------------------------------*/
-+/* \fn    nandflash_hw_init							*/
-+/* \brief NandFlash HW init							*/
-+/*------------------------------------------------------------------------------*/
-+void nandflash_hw_init(void)
-+{
-+	/* Configure PIOs */
-+	const struct pio_desc nand_pio[] = {
-+		{"RDY_BSY", AT91C_PIN_PC(13), 0, PIO_PULLUP, PIO_INPUT},
-+		{"NANDCS",  AT91C_PIN_PC(14), 0, PIO_PULLUP, PIO_OUTPUT},
-+		{(char *) 0, 0, 0,  PIO_DEFAULT, PIO_PERIPH_A},
-+	};
-+
-+	/* Setup Smart Media, first enable the address range of CS3 in HMATRIX user interface */
-+	writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) | AT91C_EBI_CS3A_SM, AT91C_BASE_CCFG + CCFG_EBICSA);
-+		    
-+	/* Configure SMC CS3 */
-+ 	writel((AT91C_SM_NWE_SETUP | AT91C_SM_NCS_WR_SETUP | AT91C_SM_NRD_SETUP | AT91C_SM_NCS_RD_SETUP), AT91C_BASE_SMC + SMC_SETUP3);
-+  	writel((AT91C_SM_NWE_PULSE | AT91C_SM_NCS_WR_PULSE | AT91C_SM_NRD_PULSE | AT91C_SM_NCS_RD_PULSE), AT91C_BASE_SMC + SMC_PULSE3);
-+	writel((AT91C_SM_NWE_CYCLE | AT91C_SM_NRD_CYCLE)						, AT91C_BASE_SMC + SMC_CYCLE3);
-+	writel((AT91C_SMC_READMODE | AT91C_SMC_WRITEMODE | AT91C_SMC_NWAITM_NWAIT_DISABLE | 
-+  		AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS | AT91C_SM_TDF)						, AT91C_BASE_SMC + SMC_CTRL3);
-+
-+	/* Configure the PIO controller */
-+	writel((1 << AT91C_ID_PIOC), PMC_PCER + AT91C_BASE_PMC);
-+	pio_setup(nand_pio);
-+	
-+	nand_recovery();
-+}
-+
-+/*------------------------------------------------------------------------------*/
-+/* \fn    nandflash_cfg_16bits_dbw_init						*/
-+/* \brief Configure SMC in 16 bits mode						*/
-+/*------------------------------------------------------------------------------*/
-+void nandflash_cfg_16bits_dbw_init(void)
-+{
-+	writel(readl(AT91C_BASE_SMC + SMC_CTRL3) | AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS, AT91C_BASE_SMC + SMC_CTRL3);
-+}
-+
-+/*------------------------------------------------------------------------------*/
-+/* \fn    nandflash_cfg_8bits_dbw_init						*/
-+/* \brief Configure SMC in 8 bits mode						*/
-+/*------------------------------------------------------------------------------*/
-+void nandflash_cfg_8bits_dbw_init(void)
-+{
-+	writel((readl(AT91C_BASE_SMC + SMC_CTRL3) & ~(AT91C_SMC_DBW)) | AT91C_SMC_DBW_WIDTH_EIGTH_BITS, AT91C_BASE_SMC + SMC_CTRL3);
-+}
-+
-+
-+#endif /* #ifdef CFG_NANDFLASH */
-diff --git a/crt0_gnu.S b/crt0_gnu.S
-index 042b617..002feef 100644
---- a/crt0_gnu.S
-+++ b/crt0_gnu.S
-@@ -106,6 +106,13 @@ _relocate_to_sram:
- #endif /* CFG_NORFLASH */
- 
- _setup_clocks:
-+/* Test if main osc is bypassed */
-+	ldr 	r0,=AT91C_PMC_MOR
-+	ldr 	r1, [r0]
-+	ldr 	r2,=AT91C_CKGR_OSCBYPASS 
-+	ands 	r1, r1, r2
-+	bne	_init_data	/* branch if OSCBYPASS=1 */
-+
- /* Test if main oscillator is enabled */
- 	ldr 	r0,=AT91C_PMC_SR
- 	ldr 	r1, [r0]
-diff --git a/include/part.h b/include/part.h
-index ba5985a..212789f 100644
---- a/include/part.h
-+++ b/include/part.h
-@@ -35,7 +35,11 @@
- 
- #ifdef AT91SAM9260
- #include "AT91SAM9260_inc.h"
--#include "at91sam9260ek.h"
-+	#ifdef at91sam9260ek
-+	#include "at91sam9260ek.h"
-+	#elif usb_a9260
-+	#include "usb-a9260.h"
-+	#endif
- #endif
- 
- #ifdef AT91SAM9XE
--- 
-1.7.9.5
-

board/calao/usb-a9260/linux-3.7.4.config

@@ -1,97 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9260=y
-CONFIG_MACH_USB_A9260=y
-CONFIG_AT91_SLOW_CLOCK=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_NETDEVICES=y
-CONFIG_MII=y
-CONFIG_MACB=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_EVBUG=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-# CONFIG_HWMON is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_EXT2_FS=y
-CONFIG_FUSE_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_UBIFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y

board/calao/usb-a9263/at91bootstrap-1.16-usb-a9263.patch

@@ -1,851 +0,0 @@
-From 74796655212d321f50ab89e8c5570245901f4cba Mon Sep 17 00:00:00 2001
-From: Gregory Hermant <gregory.hermant@calao-systems.com>
-Date: Thu, 5 Jul 2012 18:44:07 +0200
-Subject: [PATCH] Add support for the Calao-systems USB-A9263
-
-
-Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
----
- board/usb_a9263/dataflash/Makefile    |  115 +++++++++++++
- board/usb_a9263/dataflash/usb-a9263.h |   97 +++++++++++
- board/usb_a9263/nandflash/Makefile    |  117 ++++++++++++++
- board/usb_a9263/nandflash/usb-a9263.h |  116 +++++++++++++
- board/usb_a9263/usb_a9263.c           |  285 +++++++++++++++++++++++++++++++++
- crt0_gnu.S                            |    7 +
- driver/dataflash.c                    |    6 +-
- include/part.h                        |    6 +-
- 8 files changed, 745 insertions(+), 4 deletions(-)
- create mode 100644 board/usb_a9263/dataflash/Makefile
- create mode 100644 board/usb_a9263/dataflash/usb-a9263.h
- create mode 100644 board/usb_a9263/nandflash/Makefile
- create mode 100644 board/usb_a9263/nandflash/usb-a9263.h
- create mode 100644 board/usb_a9263/usb_a9263.c
-
-diff --git a/board/usb_a9263/dataflash/Makefile b/board/usb_a9263/dataflash/Makefile
-new file mode 100644
-index 0000000..332685e
---- /dev/null
-+++ b/board/usb_a9263/dataflash/Makefile
-@@ -0,0 +1,115 @@
-+# TODO: set this appropriately for your local toolchain
-+#SHELL=C:\CYGWIN_REP\dwn_071004\bin\BASH.exe
-+CROSS_COMPILE=arm-elf-
-+#CROSS_COMPILE = arm-softfloat-linux-gnu-
-+
-+TOOLCHAIN=gcc
-+
-+BOOTSTRAP_PATH=../../..
-+
-+# DataFlashBoot Configuration for USB-A9263
-+
-+# Target name (case sensitive!!!)
-+TARGET=AT91SAM9263
-+# Board name (case sensitive!!!)
-+BOARD=usb_a9263
-+# Link Address and Top_of_Memory
-+LINK_ADDR=0x300000
-+TOP_OF_MEMORY=0x314000
-+# Name of current directory
-+PROJECT=dataflash
-+
-+ifndef BOOT_NAME
-+BOOT_NAME=$(PROJECT)_$(BOARD)
-+endif
-+
-+INCL=./$(BOOTSTRAP_PATH)/board/$(BOARD)/$(PROJECT)
-+
-+ifeq ($(TOOLCHAIN), gcc)
-+
-+AS=$(CROSS_COMPILE)gcc
-+CC=$(CROSS_COMPILE)gcc
-+LD=$(CROSS_COMPILE)gcc
-+NM= $(CROSS_COMPILE)nm
-+SIZE=$(CROSS_COMPILE)size
-+OBJCOPY=$(CROSS_COMPILE)objcopy
-+OBJDUMP=$(CROSS_COMPILE)objdump
-+CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL)
-+ASFLAGS=-g -mcpu=arm9 -c -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
-+
-+# Linker flags.
-+#  -Wl,...:     tell GCC to pass this to linker.
-+#    -Map:      create map file
-+#    --cref:    add cross reference to map file
-+LDFLAGS+=-nostartfiles -nostdlib  -Wl,-Map=$(BOOT_NAME).map,--cref
-+LDFLAGS+=-T $(BOOTSTRAP_PATH)/elf32-littlearm.lds -Ttext $(LINK_ADDR)
-+OBJS=crt0_gnu.o
-+
-+endif
-+
-+OBJS+=\
-+	$(BOARD).o \
-+	main.o \
-+	gpio.o \
-+	pmc.o \
-+	debug.o \
-+	sdramc.o \
-+	dataflash.o \
-+	_udivsi3.o \
-+	_umodsi3.o \
-+	div0.o \
-+	udiv.o \
-+	string.o
-+
-+rebuild: clean all
-+
-+all: 	$(BOOT_NAME)
-+
-+ifeq ($(TOOLCHAIN), gcc)
-+$(BOOT_NAME): $(OBJS)
-+	$(LD) $(LDFLAGS) -n -o $(BOOT_NAME).elf $(OBJS)
-+	$(OBJCOPY) --strip-debug --strip-unneeded $(BOOT_NAME).elf -O binary $(BOOT_NAME).bin
-+endif
-+	
-+	
-+$(BOARD).o: $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c -o $(BOARD).o
-+
-+main.o: $(BOOTSTRAP_PATH)/main.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/main.c -o main.o
-+
-+gpio.o: $(BOOTSTRAP_PATH)/driver/gpio.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/gpio.c -o gpio.o
-+
-+pmc.o:  $(BOOTSTRAP_PATH)/driver/pmc.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/pmc.c -o pmc.o
-+
-+debug.o: $(BOOTSTRAP_PATH)/driver/debug.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/debug.c -o debug.o
-+
-+sdramc.o:  $(BOOTSTRAP_PATH)/driver/sdramc.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/sdramc.c -o sdramc.o
-+
-+dataflash.o:  $(BOOTSTRAP_PATH)/driver/dataflash.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/dataflash.c -o dataflash.o
-+
-+crt0_gnu.o:  $(BOOTSTRAP_PATH)/crt0_gnu.S
-+	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/crt0_gnu.S -o crt0_gnu.o
-+
-+div0.o:  $(BOOTSTRAP_PATH)/lib/div0.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/div0.c -o div0.o
-+
-+string.o:  $(BOOTSTRAP_PATH)/lib/string.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/string.c -o string.o
-+
-+udiv.o:  $(BOOTSTRAP_PATH)/lib/udiv.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/udiv.c -o udiv.o
-+
-+_udivsi3.o:  $(BOOTSTRAP_PATH)/lib/_udivsi3.S
-+	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_udivsi3.S -o _udivsi3.o
-+
-+_umodsi3.o:  $(BOOTSTRAP_PATH)/lib/_umodsi3.S
-+	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_umodsi3.S -o _umodsi3.o
-+
-+clean:
-+	rm -f *.o *.bin *.elf *.map
-diff --git a/board/usb_a9263/dataflash/usb-a9263.h b/board/usb_a9263/dataflash/usb-a9263.h
-new file mode 100644
-index 0000000..40a3af8
---- /dev/null
-+++ b/board/usb_a9263/dataflash/usb-a9263.h
-@@ -0,0 +1,97 @@
-+/* ----------------------------------------------------------------------------
-+ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
-+ * ----------------------------------------------------------------------------
-+ * Copyright (c) 2006, Atmel Corporation
-+
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *
-+ * - Redistributions of source code must retain the above copyright notice,
-+ * this list of conditions and the disclaimer below.
-+ *
-+ * Atmel's name may not be used to endorse or promote products derived from
-+ * this software without specific prior written permission.
-+ *
-+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
-+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
-+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
-+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
-+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ * ----------------------------------------------------------------------------
-+ * File Name           : usb-a9263.h
-+ * Object              :
-+ * Creation            : GH Jun 28th 2012
-+ *-----------------------------------------------------------------------------
-+ */
-+#ifndef _USB_A9263_H
-+#define _USB_A9263_H
-+
-+/* ******************************************************************* */
-+/* PMC Settings                                                        */
-+/*                                                                     */
-+/* The main oscillator is enabled as soon as possible in the c_startup */
-+/* and MCK is switched on the main oscillator.                         */
-+/* PLL initialization is done later in the hw_init() function          */
-+/* ******************************************************************* */
-+#define MASTER_CLOCK		(180000000/2)
-+#define PLL_LOCK_TIMEOUT	1000000
-+
-+#define PLLA_SETTINGS	0x20593F06
-+#define PLLB_SETTINGS	0x10483F0E
-+
-+/* Switch MCK on PLLA output PCK = PLLA = 2 * MCK */
-+#define MCKR_SETTINGS		(AT91C_PMC_PRES_CLK | AT91C_PMC_MDIV_2)
-+#define MCKR_CSS_SETTINGS	(AT91C_PMC_CSS_PLLA_CLK | MCKR_SETTINGS)
-+
-+/* ******************************************************************* */
-+/* DataFlash Settings                                                  */
-+/*                                                                     */
-+/* ******************************************************************* */
-+#define AT91C_BASE_SPI	AT91C_BASE_SPI0
-+#define AT91C_ID_SPI	AT91C_ID_SPI0
-+
-+/* SPI CLOCK */
-+#define AT91C_SPI_CLK 		 8000000
-+/* AC characteristics */
-+/* DLYBS = tCSS= 250ns min and DLYBCT = tCSH = 250ns */
-+#define DATAFLASH_TCSS		(0x1a << 16)	/* 250ns min (tCSS) <=> 12/48000000 = 250ns */
-+#define DATAFLASH_TCHS		(0x1 << 24)	/* 250ns min (tCSH) <=> (64*1+SCBR)/(2*48000000) */
-+
-+#define DF_CS_SETTINGS 		(AT91C_SPI_NCPHA | (AT91C_SPI_DLYBS & DATAFLASH_TCSS) | (AT91C_SPI_DLYBCT & DATAFLASH_TCHS) | ((MASTER_CLOCK / AT91C_SPI_CLK) << 8))
-+
-+/* ******************************************************************* */
-+/* SDRAMC Settings                                                     */
-+/*                                                                     */
-+/* ******************************************************************* */
-+#define AT91C_BASE_SDRAMC 	AT91C_BASE_SDRAMC0
-+#define AT91C_EBI_SDRAM		AT91C_EBI0_SDRAM
-+
-+/* ******************************************************************* */
-+/* BootStrap Settings                                                  */
-+/*                                                                     */
-+/* ******************************************************************* */
-+#define AT91C_SPI_PCS_DATAFLASH		AT91C_SPI_PCS0_DATAFLASH	/* Boot on SPI NCS0 */
-+
-+#define IMG_ADDRESS 			0x4000			/* Image Address in DataFlash */
-+#define	IMG_SIZE			0x40000			/* Image Size in DataFlash    */
-+
-+#define MACH_TYPE       		0x6AE       		/* USB-A9263 */
-+#define JUMP_ADDR			0x23F00000		/* Final Jump Address 	      */
-+
-+/* ******************************************************************* */
-+/* Application Settings                                                */
-+/* ******************************************************************* */
-+#define CFG_HW_INIT
-+#define CFG_SDRAM
-+#undef	CFG_DEBUG
-+
-+#define CFG_DATAFLASH
-+
-+#endif	/* _USB_A9263_H */
-diff --git a/board/usb_a9263/nandflash/Makefile b/board/usb_a9263/nandflash/Makefile
-new file mode 100644
-index 0000000..c453098
---- /dev/null
-+++ b/board/usb_a9263/nandflash/Makefile
-@@ -0,0 +1,117 @@
-+# TODO: set this appropriately for your local toolchain
-+#SHELL=C:\CYGWIN_REP\dwn_071004\bin\BASH.exe
-+CROSS_COMPILE=arm-elf-
-+
-+TOOLCHAIN=gcc
-+
-+BOOTSTRAP_PATH=../../..
-+
-+# NandFlashBoot Configuration for USB-A9263
-+
-+# Target name (case sensitive!!!)
-+TARGET=AT91SAM9263
-+# Board name (case sensitive!!!)
-+BOARD=usb_a9263
-+# Link Address and Top_of_Memory
-+LINK_ADDR=0x300000
-+TOP_OF_MEMORY=0x314000
-+# Name of current directory
-+PROJECT=nandflash
-+
-+ifndef BOOT_NAME
-+BOOT_NAME=$(PROJECT)_$(BOARD)
-+endif
-+
-+INCL=./$(BOOTSTRAP_PATH)/board/$(BOARD)/$(PROJECT)
-+
-+ifeq ($(TOOLCHAIN), gcc)
-+
-+AS=$(CROSS_COMPILE)gcc
-+CC=$(CROSS_COMPILE)gcc
-+LD=$(CROSS_COMPILE)gcc
-+NM= $(CROSS_COMPILE)nm
-+SIZE=$(CROSS_COMPILE)size
-+OBJCOPY=$(CROSS_COMPILE)objcopy
-+OBJDUMP=$(CROSS_COMPILE)objdump
-+CCFLAGS=-g -mcpu=arm9 -O0 -Wall -D$(TARGET) -D$(BOARD) -I$(INCL)
-+ASFLAGS=-g -mcpu=arm9 -c -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
-+
-+# Linker flags.
-+#  -Wl,...:     tell GCC to pass this to linker.
-+#    -Map:      create map file
-+#    --cref:    add cross reference to map file
-+LDFLAGS+=-nostartfiles -nostdlib  -Wl,-Map=$(BOOT_NAME).map,--cref
-+LDFLAGS+=-T $(BOOTSTRAP_PATH)/elf32-littlearm.lds -Ttext $(LINK_ADDR)
-+OBJS=crt0_gnu.o
-+
-+endif
-+
-+OBJS+=\
-+	$(BOARD).o \
-+	main.o \
-+	gpio.o \
-+	pmc.o \
-+	debug.o \
-+	sdramc.o \
-+	nandflash.o \
-+	_udivsi3.o \
-+	_umodsi3.o \
-+	div0.o \
-+	udiv.o \
-+	string.o
-+
-+rebuild: clean all
-+
-+all: 	$(BOOT_NAME)
-+
-+ifeq ($(TOOLCHAIN), gcc)
-+$(BOOT_NAME): $(OBJS)
-+	$(LD) $(LDFLAGS) -n -o $(BOOT_NAME).elf $(OBJS)
-+	$(OBJCOPY) --strip-debug --strip-unneeded $(BOOT_NAME).elf -O binary $(BOOT_NAME).bin
-+endif
-+	
-+	
-+$(BOARD).o: $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c -o $(BOARD).o
-+
-+main.o: $(BOOTSTRAP_PATH)/main.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/main.c -o main.o
-+
-+gpio.o: $(BOOTSTRAP_PATH)/driver/gpio.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/gpio.c -o gpio.o
-+
-+pmc.o:  $(BOOTSTRAP_PATH)/driver/pmc.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/pmc.c -o pmc.o
-+
-+debug.o: $(BOOTSTRAP_PATH)/driver/debug.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/debug.c -o debug.o
-+
-+sdramc.o:  $(BOOTSTRAP_PATH)/driver/sdramc.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/sdramc.c -o sdramc.o
-+
-+dataflash.o:  $(BOOTSTRAP_PATH)/driver/dataflash.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/dataflash.c -o dataflash.o
-+
-+nandflash.o:  $(BOOTSTRAP_PATH)/driver/nandflash.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/nandflash.c -o nandflash.o
-+
-+crt0_gnu.o:  $(BOOTSTRAP_PATH)/crt0_gnu.S
-+	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/crt0_gnu.S -o crt0_gnu.o
-+
-+div0.o:  $(BOOTSTRAP_PATH)/lib/div0.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/div0.c -o div0.o
-+
-+string.o:  $(BOOTSTRAP_PATH)/lib/string.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/string.c -o string.o
-+
-+udiv.o:  $(BOOTSTRAP_PATH)/lib/udiv.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/udiv.c -o udiv.o
-+
-+_udivsi3.o:  $(BOOTSTRAP_PATH)/lib/_udivsi3.S
-+	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_udivsi3.S -o _udivsi3.o
-+
-+_umodsi3.o:  $(BOOTSTRAP_PATH)/lib/_umodsi3.S
-+	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_umodsi3.S -o _umodsi3.o
-+
-+clean:
-+	rm -f *.o *.bin *.elf *.map
-diff --git a/board/usb_a9263/nandflash/usb-a9263.h b/board/usb_a9263/nandflash/usb-a9263.h
-new file mode 100644
-index 0000000..24e2cf1
---- /dev/null
-+++ b/board/usb_a9263/nandflash/usb-a9263.h
-@@ -0,0 +1,116 @@
-+/* ----------------------------------------------------------------------------
-+ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
-+ * ----------------------------------------------------------------------------
-+ * Copyright (c) 2006, Atmel Corporation
-+
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *
-+ * - Redistributions of source code must retain the above copyright notice,
-+ * this list of conditions and the disclaimer below.
-+ *
-+ * Atmel's name may not be used to endorse or promote products derived from
-+ * this software without specific prior written permission.
-+ *
-+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
-+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
-+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
-+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
-+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ * ----------------------------------------------------------------------------
-+ * File Name           : usb-a9263.h
-+ * Object              :
-+ * Creation            : GH Jun 28th 2012
-+ *-----------------------------------------------------------------------------
-+ */
-+#ifndef _USB_A9263_H
-+#define _USB_A9263_H
-+
-+/* ******************************************************************* */
-+/* PMC Settings                                                        */
-+/*                                                                     */
-+/* The main oscillator is enabled as soon as possible in the c_startup */
-+/* and MCK is switched on the main oscillator.                         */
-+/* PLL initialization is done later in the hw_init() function          */
-+/* ******************************************************************* */
-+#define MASTER_CLOCK		(180000000/2)
-+#define PLL_LOCK_TIMEOUT	1000000
-+
-+#define PLLA_SETTINGS	0x20593F06
-+#define PLLB_SETTINGS	0x10483F0E
-+
-+/* Switch MCK on PLLA output PCK = PLLA = 2 * MCK */
-+#define MCKR_SETTINGS		(AT91C_PMC_PRES_CLK | AT91C_PMC_MDIV_2)
-+#define MCKR_CSS_SETTINGS	(AT91C_PMC_CSS_PLLA_CLK | MCKR_SETTINGS)
-+
-+/* ******************************************************************* */
-+/* NandFlash Settings                                                  */
-+/*                                                                     */
-+/* ******************************************************************* */
-+#define AT91C_SMARTMEDIA_BASE	0x40000000
-+
-+#define AT91_SMART_MEDIA_ALE    (1 << 21)	/* our ALE is AD21 */
-+#define AT91_SMART_MEDIA_CLE    (1 << 22)	/* our CLE is AD22 */
-+
-+#define NAND_DISABLE_CE() do { *(volatile unsigned int *)AT91C_PIOD_SODR = AT91C_PIO_PD15;} while(0)
-+#define NAND_ENABLE_CE()  do { *(volatile unsigned int *)AT91C_PIOD_CODR = AT91C_PIO_PD15;} while(0)
-+#define NAND_WAIT_READY() while (!(*(volatile unsigned int *)AT91C_PIOA_PDSR & AT91C_PIO_PA22))
-+
-+/* ******************************************************************* */
-+/* SDRAMC Settings                                                     */
-+/*                                                                     */
-+/* ******************************************************************* */
-+#define AT91C_BASE_SDRAMC 	AT91C_BASE_SDRAMC0
-+#define AT91C_EBI_SDRAM		AT91C_EBI0_SDRAM
-+
-+/* ******************************************************************** */
-+/* SMC Chip Select 3 Timings for NandFlash for MASTER_CLOCK = 90000000. */
-+/* Please refer to SMC section in AT91SAM9x datasheet to learn how 	*/
-+/* to generate these values. 						*/
-+/* ******************************************************************** */
-+#define AT91C_SM_NWE_SETUP	(1 << 0)
-+#define AT91C_SM_NCS_WR_SETUP	(0 << 8)
-+#define AT91C_SM_NRD_SETUP	(1 << 16)
-+#define AT91C_SM_NCS_RD_SETUP	(0 << 24)
-+  
-+#define AT91C_SM_NWE_PULSE 	(3 << 0)
-+#define AT91C_SM_NCS_WR_PULSE	(3 << 8)
-+#define AT91C_SM_NRD_PULSE	(3 << 16)
-+#define AT91C_SM_NCS_RD_PULSE	(3 << 24)
-+  
-+#define AT91C_SM_NWE_CYCLE 	(5 << 0)
-+#define AT91C_SM_NRD_CYCLE	(5 << 16)
-+
-+#define AT91C_SM_TDF	        (2 << 16)
-+
-+/* ******************************************************************* */
-+/* BootStrap Settings                                                  */
-+/*                                                                     */
-+/* ******************************************************************* */
-+#define IMG_ADDRESS 	0x20000		/* Image Address in NandFlash */
-+#define	IMG_SIZE	0x40000		/* Image Size in NandFlash    */
-+
-+#define MACH_TYPE       0x6AE  		/* USB-A9263 */
-+#define JUMP_ADDR	0x23F00000	/* Final Jump Address 	      */
-+
-+/* ******************************************************************* */
-+/* Application Settings                                                */
-+/* ******************************************************************* */
-+#undef CFG_DEBUG
-+#undef CFG_DATAFLASH
-+
-+#define CFG_NANDFLASH
-+#undef	NANDFLASH_SMALL_BLOCKS	/* NANDFLASH_LARGE_BLOCKS used instead */
-+
-+#define CFG_HW_INIT
-+#define CFG_SDRAM
-+
-+
-+#endif	/* _USB_A9263_H */
-diff --git a/board/usb_a9263/usb_a9263.c b/board/usb_a9263/usb_a9263.c
-new file mode 100644
-index 0000000..5630f99
---- /dev/null
-+++ b/board/usb_a9263/usb_a9263.c
-@@ -0,0 +1,285 @@
-+/* ----------------------------------------------------------------------------
-+ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
-+ * ----------------------------------------------------------------------------
-+ * Copyright (c) 2006, Atmel Corporation
-+
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *
-+ * - Redistributions of source code must retain the above copyright notice,
-+ * this list of conditions and the disclaiimer below.
-+ *
-+ * Atmel's name may not be used to endorse or promote products derived from
-+ * this software without specific prior written permission.
-+ *
-+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
-+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
-+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
-+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
-+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ * ----------------------------------------------------------------------------
-+ * File Name           : usb_a9263.c
-+ * Object              :
-+ * Creation            : GH Jun 28th 2012
-+ *-----------------------------------------------------------------------------
-+ */
-+#include "../../include/part.h"
-+#include "../../include/gpio.h"
-+#include "../../include/pmc.h"
-+#include "../../include/debug.h"
-+#include "../../include/sdramc.h"
-+#include "../../include/main.h"
-+#ifdef CFG_NANDFLASH
-+#include "../../include/nandflash.h"
-+#endif
-+#ifdef CFG_DATAFLASH
-+#include "../../include/dataflash.h"
-+#endif
-+
-+static inline unsigned int get_cp15(void)
-+{
-+	unsigned int value;
-+	__asm__("mrc p15, 0, %0, c1, c0, 0" : "=r" (value));
-+	return value;
-+}
-+
-+static inline void set_cp15(unsigned int value)
-+{
-+	__asm__("mcr p15, 0, %0, c1, c0, 0" : : "r" (value));
-+}
-+
-+
-+#ifdef CFG_HW_INIT
-+/*---------------------------------------------------------------------------- */
-+/* \fn    hw_init							       */
-+/* \brief This function performs very low level HW initialization	       */
-+/* This function is invoked as soon as possible during the c_startup	       */
-+/* The bss segment must be initialized					       */
-+/*---------------------------------------------------------------------------- */
-+void hw_init(void)
-+{
-+	/* Configure PIOs */
-+	const struct pio_desc hw_pio[] = {
-+#ifdef CFG_DEBUG
-+		{"RXD", AT91C_PIN_PC(30), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"TXD", AT91C_PIN_PC(31), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+#endif
-+		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
-+	};
-+
-+	/* Disable watchdog */
-+	writel(AT91C_WDTC_WDDIS, AT91C_BASE_WDTC + WDTC_WDMR);
-+
-+	/* At this stage the main oscillator is supposed to be enabled
-+	 * PCK = MCK = MOSC */
-+
-+	/* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */
-+	pmc_cfg_plla(PLLA_SETTINGS, PLL_LOCK_TIMEOUT);
-+
-+	/* PCK = PLLA = 2 * MCK */
-+	pmc_cfg_mck(MCKR_SETTINGS, PLL_LOCK_TIMEOUT);
-+	/* Switch MCK on PLLA output */
-+	pmc_cfg_mck(MCKR_CSS_SETTINGS, PLL_LOCK_TIMEOUT);
-+
-+
-+	/* Configure PLLB */
-+	pmc_cfg_pllb(PLLB_SETTINGS, PLL_LOCK_TIMEOUT);
-+
-+	/* Configure the PIO controller to output PCK0 */
-+	pio_setup(hw_pio);
-+
-+	/* Configure the EBI0 Slave Slot Cycle to 64 */
-+	writel( (readl((AT91C_BASE_MATRIX + MATRIX_SCFG4)) & ~0xFF) | 0x40, (AT91C_BASE_MATRIX + MATRIX_SCFG4));
-+
-+#ifdef CFG_DEBUG
-+	/* Enable Debug messages on the DBGU */
-+	dbg_init(BAUDRATE(MASTER_CLOCK, 115200));
-+	dbg_print("Start AT91Bootstrap...\n\r");
-+#endif /* CFG_DEBUG */
-+
-+#ifdef CFG_SDRAM
-+	/* Initialize the matrix */
-+	/* VDDIOMSEL = 1 -> Memories are 3.3V powered */
-+	writel(readl(AT91C_BASE_CCFG + CCFG_EBI0CSA) | (1 << 16) | AT91C_EBI_CS1A_SDRAMC, AT91C_BASE_CCFG + CCFG_EBI0CSA);
-+
-+	/* Configure SDRAM Controller */
-+	sdram_init(	AT91C_SDRAMC_NC_9  |
-+				AT91C_SDRAMC_NR_13 |
-+				AT91C_SDRAMC_CAS_2 |
-+				AT91C_SDRAMC_NB_4_BANKS |
-+				AT91C_SDRAMC_DBW_32_BITS |
-+				AT91C_SDRAMC_TWR_2 |
-+				AT91C_SDRAMC_TRC_7 |
-+				AT91C_SDRAMC_TRP_2 |
-+				AT91C_SDRAMC_TRCD_2 |
-+				AT91C_SDRAMC_TRAS_5 |
-+				AT91C_SDRAMC_TXSR_8,		/* Control Register       */
-+				(MASTER_CLOCK * 7)/1000000,	/* Refresh Timer Register */
-+				AT91C_SDRAMC_MD_SDRAM);		/* SDRAM (no low power)   */ 
-+#endif	/* CFG_SDRAM */
-+}
-+#endif /* CFG_HW_INIT */
-+
-+
-+#ifdef CFG_SDRAM
-+//*----------------------------------------------------------------------------
-+//* \fn    sdramc_hw_init
-+//* \brief This function performs SDRAMC HW initialization
-+//*----------------------------------------------------------------------------*/
-+void sdramc_hw_init(void)
-+{
-+	/* Configure PIOs */
-+	const struct pio_desc sdramc_pio[] = {
-+		{"D16", AT91C_PIN_PD(16), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D17", AT91C_PIN_PD(17), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D18", AT91C_PIN_PD(18), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D19", AT91C_PIN_PD(19), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D20", AT91C_PIN_PD(20), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D21", AT91C_PIN_PD(21), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D22", AT91C_PIN_PD(22), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D23", AT91C_PIN_PD(23), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D24", AT91C_PIN_PD(24), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D25", AT91C_PIN_PD(25), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D26", AT91C_PIN_PD(26), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D27", AT91C_PIN_PD(27), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D28", AT91C_PIN_PD(28), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D29", AT91C_PIN_PD(29), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D30", AT91C_PIN_PD(30), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D31", AT91C_PIN_PD(31), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
-+	};
-+
-+	/* Configure the SDRAMC PIO controller */
-+	pio_setup(sdramc_pio);
-+}
-+#endif
-+
-+#ifdef CFG_DATAFLASH
-+/*------------------------------------------------------------------------------*/
-+/* \fn    df_recovery								*/
-+/* \brief This function erases DataFlash Page 0 if USER PB is pressed 		*/
-+/*        during boot sequence							*/
-+/*------------------------------------------------------------------------------*/
-+void df_recovery(AT91PS_DF pDf)
-+{
-+#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS0_DATAFLASH)
-+	/* Configure PIOs */
-+	const struct pio_desc usrpb_pio[] = {
-+		{"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
-+		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
-+	};
-+
-+	/* Configure the PIO controller */
-+	writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
-+	pio_setup(usrpb_pio);
-+	
-+	/* If USER PB is pressed during Boot sequence */
-+	/* Erase NandFlash block 0*/
-+	if ( !pio_get_value(AT91C_PIN_PB(10)) )
-+		df_page_erase(pDf, 0);
-+#endif
-+}
-+/*------------------------------------------------------------------------------*/
-+/* \fn    df_hw_init								*/
-+/* \brief This function performs DataFlash HW initialization			*/
-+/*------------------------------------------------------------------------------*/
-+void df_hw_init(void)
-+{
-+	/* Configure PIOs */
-+	const struct pio_desc df_pio[] = {
-+		{"MISO",  AT91C_PIN_PA(0), 0, PIO_DEFAULT, PIO_PERIPH_B},
-+		{"MOSI",  AT91C_PIN_PA(1), 0, PIO_DEFAULT, PIO_PERIPH_B},
-+		{"SPCK",  AT91C_PIN_PA(2), 0, PIO_DEFAULT, PIO_PERIPH_B},
-+		{"NPCS0", AT91C_PIN_PA(5), 0, PIO_DEFAULT, PIO_PERIPH_B},
-+		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
-+	};
-+
-+	/* Configure the PIO controller */
-+	pio_setup(df_pio);
-+}
-+#endif /* CFG_DATAFLASH */
-+
-+
-+#ifdef CFG_NANDFLASH
-+/*------------------------------------------------------------------------------*/
-+/* \fn    nand_recovery								*/
-+/* \brief This function erases NandFlash Block 0 if USER PB is pressed 		*/
-+/*        during boot sequence							*/
-+/*------------------------------------------------------------------------------*/
-+static void nand_recovery(void)
-+{
-+	/* Configure PIOs */
-+	const struct pio_desc usrpb_pio[] = {
-+		{"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
-+		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
-+	};
-+
-+	/* Configure the PIO controller */
-+	writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
-+	pio_setup(usrpb_pio);
-+	
-+	/* If USER PB is pressed during Boot sequence */
-+	/* Erase NandFlash block 0*/
-+	if (!pio_get_value(AT91C_PIN_PB(10)) )
-+		AT91F_NandEraseBlock0();
-+}
-+/*------------------------------------------------------------------------------*/
-+/* \fn    nandflash_hw_init							*/
-+/* \brief NandFlash HW init							*/
-+/*------------------------------------------------------------------------------*/
-+void nandflash_hw_init(void)
-+{
-+	/* Configure PIOs */
-+	const struct pio_desc nand_pio[] = {
-+		{"RDY_BSY", AT91C_PIN_PA(22), 0, PIO_PULLUP, PIO_INPUT},
-+		{"NANDCS",  AT91C_PIN_PD(15), 0, PIO_PULLUP, PIO_OUTPUT},
-+		{(char *) 0, 0, 0,  PIO_DEFAULT, PIO_PERIPH_A},
-+	};
-+
-+	/* Setup Smart Media, first enable the address range of CS3 in HMATRIX user interface */
-+	writel(readl(AT91C_BASE_CCFG + CCFG_EBI0CSA) | AT91C_EBI_CS3A_SM, AT91C_BASE_CCFG + CCFG_EBI0CSA);
-+		    
-+	/* Configure SMC CS3 */
-+ 	writel((AT91C_SM_NWE_SETUP | AT91C_SM_NCS_WR_SETUP | AT91C_SM_NRD_SETUP | AT91C_SM_NCS_RD_SETUP), AT91C_BASE_SMC0 + SMC_SETUP3);
-+  	writel((AT91C_SM_NWE_PULSE | AT91C_SM_NCS_WR_PULSE | AT91C_SM_NRD_PULSE | AT91C_SM_NCS_RD_PULSE), AT91C_BASE_SMC0 + SMC_PULSE3);
-+	writel((AT91C_SM_NWE_CYCLE | AT91C_SM_NRD_CYCLE)						, AT91C_BASE_SMC0 + SMC_CYCLE3);
-+	writel((AT91C_SMC_READMODE | AT91C_SMC_WRITEMODE | AT91C_SMC_NWAITM_NWAIT_DISABLE | 
-+  		AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS | AT91C_SM_TDF)						, AT91C_BASE_SMC0 + SMC_CTRL3);
-+
-+	/* Configure the PIO controller */
-+	writel((1 << AT91C_ID_PIOA), PMC_PCER + AT91C_BASE_PMC);
-+	writel((1 << AT91C_ID_PIOCDE), PMC_PCER + AT91C_BASE_PMC);
-+
-+	pio_setup(nand_pio);
-+
-+	nand_recovery();
-+}
-+
-+/*------------------------------------------------------------------------------*/
-+/* \fn    nandflash_cfg_16bits_dbw_init						*/
-+/* \brief Configure SMC in 16 bits mode						*/
-+/*------------------------------------------------------------------------------*/
-+void nandflash_cfg_16bits_dbw_init(void)
-+{
-+	writel(readl(AT91C_BASE_SMC0 + SMC_CTRL3) | AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS, AT91C_BASE_SMC0 + SMC_CTRL3);
-+}
-+
-+/*------------------------------------------------------------------------------*/
-+/* \fn    nandflash_cfg_8bits_dbw_init						*/
-+/* \brief Configure SMC in 8 bits mode						*/
-+/*------------------------------------------------------------------------------*/
-+void nandflash_cfg_8bits_dbw_init(void)
-+{
-+	writel((readl(AT91C_BASE_SMC0 + SMC_CTRL3) & ~(AT91C_SMC_DBW)) | AT91C_SMC_DBW_WIDTH_EIGTH_BITS, AT91C_BASE_SMC0 + SMC_CTRL3);
-+}
-+
-+#endif /* #ifdef CFG_NANDFLASH */
-+
-+
-diff --git a/crt0_gnu.S b/crt0_gnu.S
-index 042b617..002feef 100644
---- a/crt0_gnu.S
-+++ b/crt0_gnu.S
-@@ -106,6 +106,13 @@ _relocate_to_sram:
- #endif /* CFG_NORFLASH */
- 
- _setup_clocks:
-+/* Test if main osc is bypassed */
-+	ldr 	r0,=AT91C_PMC_MOR
-+	ldr 	r1, [r0]
-+	ldr 	r2,=AT91C_CKGR_OSCBYPASS 
-+	ands 	r1, r1, r2
-+	bne	_init_data	/* branch if OSCBYPASS=1 */
-+
- /* Test if main oscillator is enabled */
- 	ldr 	r0,=AT91C_PMC_SR
- 	ldr 	r1, [r0]
-diff --git a/driver/dataflash.c b/driver/dataflash.c
-index e28e49e..4de295a 100644
---- a/driver/dataflash.c
-+++ b/driver/dataflash.c
-@@ -293,14 +293,14 @@ static int df_init (AT91PS_DF pDf)
- 			pDf->dfDescription.pages_size = 264;
- 			pDf->dfDescription.page_offset = 9;
- 			break;
--
-+*/
- 		case AT45DB021B:
- 			pDf->dfDescription.pages_number = 1024;
- 			pDf->dfDescription.pages_size = 264;
- 			pDf->dfDescription.page_offset = 9;
- 			break;
- 
--		case AT45DB041B:
-+/*		case AT45DB041B:
- 			pDf->dfDescription.pages_number = 2048;
- 			pDf->dfDescription.pages_size = 264;
- 			pDf->dfDescription.page_offset = 9;
-@@ -373,7 +373,7 @@ int load_df(unsigned int pcs, unsigned int img_addr, unsigned int img_size, unsi
-     if (!df_init(pDf))
-         return -1;
- 
--#if defined(AT91SAM9260) || defined(AT91SAM9XE) || defined(AT91SAM9G20)
-+#if defined(AT91SAM9260) || defined(AT91SAM9263) || defined(AT91SAM9XE) || defined(AT91SAM9G20)
-     /* Test if a button has been pressed or not */
-     /* Erase Page 0 to avoid infinite loop */
-     df_recovery(pDf);
-diff --git a/include/part.h b/include/part.h
-index ba5985a..a1863d0 100644
---- a/include/part.h
-+++ b/include/part.h
-@@ -61,7 +61,11 @@
- 
- #ifdef AT91SAM9263
- #include "AT91SAM9263_inc.h"
--#include "at91sam9263ek.h"
-+	#ifdef at91sam9263ek
-+	#include "at91sam9263ek.h"
-+	#elif usb_a9263
-+	#include "usb-a9263.h"
-+	#endif
- #endif
- 
- #ifdef AT91CAP9
--- 
-1.5.6.3
-

board/calao/usb-a9263/linux-3.4.4.config

@@ -1,102 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9263=y
-CONFIG_MACH_USB_A9263=y
-CONFIG_AT91_SLOW_CLOCK=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_NETDEVICES=y
-CONFIG_MII=y
-CONFIG_MACB=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_EVBUG=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-# CONFIG_HWMON is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_EXT2_FS=y
-CONFIG_FUSE_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_XATTR=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y

board/calao/usb-a9g20-lpw/at91bootstrap-1.16-usb-a9g20-lpw.patch

@@ -1,610 +0,0 @@
-From 8d84757d5170969e8bdfebc7951f43c5aa2b05fd Mon Sep 17 00:00:00 2001
-From: Gregory Hermant <gregory.hermant@calao-systems.com>
-Date: Fri, 6 Jul 2012 16:32:47 +0200
-Subject: [PATCH] Add support for the Calao-systems USB-A9G20-LPW
-
-
-Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
----
- board/usb_a9g20_lpw/nandflash/Makefile        |  121 ++++++++++
- board/usb_a9g20_lpw/nandflash/usb-a9g20-lpw.h |  112 +++++++++
- board/usb_a9g20_lpw/usb_a9g20_lpw.c           |  303 +++++++++++++++++++++++++
- crt0_gnu.S                                    |    7 +
- include/part.h                                |    6 +-
- 5 files changed, 548 insertions(+), 1 deletions(-)
- create mode 100644 board/usb_a9g20_lpw/nandflash/Makefile
- create mode 100644 board/usb_a9g20_lpw/nandflash/usb-a9g20-lpw.h
- create mode 100644 board/usb_a9g20_lpw/usb_a9g20_lpw.c
-
-diff --git a/board/usb_a9g20_lpw/nandflash/Makefile b/board/usb_a9g20_lpw/nandflash/Makefile
-new file mode 100644
-index 0000000..8c9d99a
---- /dev/null
-+++ b/board/usb_a9g20_lpw/nandflash/Makefile
-@@ -0,0 +1,121 @@
-+# TODO: set this appropriately for your local toolchain
-+ifndef ERASE_FCT
-+ERASE_FCT=rm -f
-+endif
-+ifndef CROSS_COMPILE
-+CROSS_COMPILE=arm-elf-
-+endif
-+
-+TOOLCHAIN=gcc
-+
-+BOOTSTRAP_PATH=../../..
-+
-+# NandFlashBoot Configuration for USB-A9G20-LPW
-+
-+# Target name (case sensitive!!!)
-+TARGET=AT91SAM9G20
-+# Board name (case sensitive!!!)
-+BOARD=usb_a9g20_lpw
-+# Link Address and Top_of_Memory
-+LINK_ADDR=0x200000
-+TOP_OF_MEMORY=0x301000
-+# Name of current directory
-+PROJECT=nandflash
-+
-+ifndef BOOT_NAME
-+BOOT_NAME=$(PROJECT)_$(BOARD)
-+endif
-+
-+INCL=./$(BOOTSTRAP_PATH)/board/$(BOARD)/$(PROJECT)
-+
-+ifeq ($(TOOLCHAIN), gcc)
-+
-+AS=$(CROSS_COMPILE)gcc
-+CC=$(CROSS_COMPILE)gcc
-+LD=$(CROSS_COMPILE)gcc
-+NM= $(CROSS_COMPILE)nm
-+SIZE=$(CROSS_COMPILE)size
-+OBJCOPY=$(CROSS_COMPILE)objcopy
-+OBJDUMP=$(CROSS_COMPILE)objdump
-+CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL)
-+ASFLAGS=-g -mcpu=arm926ej-s -c -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
-+
-+# Linker flags.
-+#  -Wl,...:     tell GCC to pass this to linker.
-+#    -Map:      create map file
-+#    --cref:    add cross reference to map file
-+LDFLAGS+=-nostartfiles -nostdlib -Wl,-Map=$(BOOT_NAME).map,--cref
-+LDFLAGS+=-T $(BOOTSTRAP_PATH)/elf32-littlearm.lds -Ttext $(LINK_ADDR)
-+OBJS=crt0_gnu.o
-+
-+endif
-+
-+OBJS+=\
-+	$(BOARD).o \
-+	main.o \
-+	gpio.o \
-+	pmc.o \
-+	debug.o \
-+	sdramc.o \
-+	nandflash.o \
-+	_udivsi3.o \
-+	_umodsi3.o \
-+	div0.o \
-+	udiv.o \
-+	string.o
-+
-+rebuild: clean all
-+
-+all: 	$(BOOT_NAME)
-+
-+ifeq ($(TOOLCHAIN), gcc)
-+$(BOOT_NAME): $(OBJS)
-+	$(LD) $(LDFLAGS) -n -o $(BOOT_NAME).elf $(OBJS)
-+	$(OBJCOPY) --strip-debug --strip-unneeded $(BOOT_NAME).elf -O binary $(BOOT_NAME).bin
-+endif
-+
-+
-+$(BOARD).o: $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c -o $(BOARD).o
-+
-+main.o: $(BOOTSTRAP_PATH)/main.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/main.c -o main.o
-+
-+gpio.o: $(BOOTSTRAP_PATH)/driver/gpio.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/gpio.c -o gpio.o
-+
-+pmc.o:  $(BOOTSTRAP_PATH)/driver/pmc.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/pmc.c -o pmc.o
-+
-+debug.o: $(BOOTSTRAP_PATH)/driver/debug.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/debug.c -o debug.o
-+
-+sdramc.o:  $(BOOTSTRAP_PATH)/driver/sdramc.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/sdramc.c -o sdramc.o
-+
-+dataflash.o:  $(BOOTSTRAP_PATH)/driver/dataflash.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/dataflash.c -o dataflash.o
-+
-+nandflash.o:  $(BOOTSTRAP_PATH)/driver/nandflash.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/nandflash.c -o nandflash.o
-+
-+crt0_gnu.o:  $(BOOTSTRAP_PATH)/crt0_gnu.S
-+	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/crt0_gnu.S -o crt0_gnu.o
-+
-+div0.o:  $(BOOTSTRAP_PATH)/lib/div0.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/div0.c -o div0.o
-+
-+string.o:  $(BOOTSTRAP_PATH)/lib/string.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/string.c -o string.o
-+
-+udiv.o:  $(BOOTSTRAP_PATH)/lib/udiv.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/udiv.c -o udiv.o
-+
-+_udivsi3.o:  $(BOOTSTRAP_PATH)/lib/_udivsi3.S
-+	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_udivsi3.S -o _udivsi3.o
-+
-+_umodsi3.o:  $(BOOTSTRAP_PATH)/lib/_umodsi3.S
-+	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_umodsi3.S -o _umodsi3.o
-+
-+clean:
-+	$(ERASE_FCT) *.o *.bin *.elf *.map
-diff --git a/board/usb_a9g20_lpw/nandflash/usb-a9g20-lpw.h b/board/usb_a9g20_lpw/nandflash/usb-a9g20-lpw.h
-new file mode 100644
-index 0000000..c0bdc6e
---- /dev/null
-+++ b/board/usb_a9g20_lpw/nandflash/usb-a9g20-lpw.h
-@@ -0,0 +1,112 @@
-+/* ----------------------------------------------------------------------------
-+ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
-+ * ----------------------------------------------------------------------------
-+ * Copyright (c) 2008, Atmel Corporation
-+
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *
-+ * - Redistributions of source code must retain the above copyright notice,
-+ * this list of conditions and the disclaimer below.
-+ *
-+ * Atmel's name may not be used to endorse or promote products derived from
-+ * this software without specific prior written permission.
-+ *
-+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
-+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
-+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
-+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
-+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ * ----------------------------------------------------------------------------
-+ * File Name           : usb-a9g20-lpw.h
-+ * Object              :
-+ * Creation            : GH July 6th 2012
-+ *-----------------------------------------------------------------------------
-+ */
-+#ifndef _USB_A9G20_LPW_H
-+#define _USB_A9G20_LPW_H
-+
-+/* ******************************************************************* */
-+/* PMC Settings                                                        */
-+/*                                                                     */
-+/* The main oscillator is enabled as soon as possible in the c_startup */
-+/* and MCK is switched on the main oscillator.                         */
-+/* PLL initialization is done later in the hw_init() function          */
-+/* ******************************************************************* */
-+#define MASTER_CLOCK		(133000000)
-+#define PLL_LOCK_TIMEOUT	1000000
-+
-+/* Set PLLA to 798Mhz */
-+#define PLLA_SETTINGS	0x20843F02
-+#define PLLB_SETTINGS	0x100F3F02
-+
-+/* Switch MCK on PLLA output PCK = PLLA/2 = 3 * MCK */
-+#define MCKR_SETTINGS		0x1300
-+#define MCKR_CSS_SETTINGS	(AT91C_PMC_CSS_PLLA_CLK | MCKR_SETTINGS)
-+
-+/* ******************************************************************* */
-+/* NandFlash Settings                                                  */
-+/*                                                                     */
-+/* ******************************************************************* */
-+#define AT91C_SMARTMEDIA_BASE	0x40000000
-+
-+#define AT91_SMART_MEDIA_ALE    (1 << 21)	/* our ALE is AD21 */
-+#define AT91_SMART_MEDIA_CLE    (1 << 22)	/* our CLE is AD22 */
-+
-+#define NAND_DISABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_SODR = AT91C_PIO_PC14;} while(0)
-+#define NAND_ENABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_CODR = AT91C_PIO_PC14;} while(0)
-+
-+#define NAND_WAIT_READY() while (!(*(volatile unsigned int *)AT91C_PIOC_PDSR & AT91C_PIO_PC13))
-+
-+
-+/* ******************************************************************** */
-+/* SMC Chip Select 3 Timings for NandFlash for MASTER_CLOCK = 133000000.*/
-+/* Please refer to SMC section in AT91SAM9 datasheet to learn how 	*/
-+/* to generate these values. 						*/
-+/* ******************************************************************** */
-+#define AT91C_SM_NWE_SETUP	(2 << 0)
-+#define AT91C_SM_NCS_WR_SETUP	(0 << 8)
-+#define AT91C_SM_NRD_SETUP	(2 << 16)
-+#define AT91C_SM_NCS_RD_SETUP	(0 << 24)
-+  
-+#define AT91C_SM_NWE_PULSE 	(4 << 0)
-+#define AT91C_SM_NCS_WR_PULSE	(4 << 8)
-+#define AT91C_SM_NRD_PULSE	(4 << 16)
-+#define AT91C_SM_NCS_RD_PULSE	(4 << 24)
-+  
-+#define AT91C_SM_NWE_CYCLE 	(7 << 0)
-+#define AT91C_SM_NRD_CYCLE	(7 << 16)
-+
-+#define AT91C_SM_TDF	        (3 << 16)
-+
-+/* ******************************************************************* */
-+/* BootStrap Settings                                                  */
-+/*                                                                     */
-+/* ******************************************************************* */
-+#define IMG_ADDRESS 		0x20000			/* Image Address in NandFlash */
-+#define	IMG_SIZE		0x40000			/* Image Size in NandFlash */
-+
-+#define MACH_TYPE		0x731			/* USB-A9G20 */
-+#define JUMP_ADDR		0x23F00000		/* Final Jump Address */
-+
-+/* ******************************************************************* */
-+/* Application Settings                                                */
-+/* ******************************************************************* */
-+#undef CFG_DEBUG
-+#undef CFG_DATAFLASH
-+
-+#define CFG_NANDFLASH
-+#undef	NANDFLASH_SMALL_BLOCKS	/* NANDFLASH_LARGE_BLOCKS used instead */
-+#undef  CFG_NANDFLASH_RECOVERY
-+
-+#define	CFG_SDRAM
-+#define	CFG_HW_INIT
-+
-+#endif	/* _USB_A9G20_LPW_H */
-diff --git a/board/usb_a9g20_lpw/usb_a9g20_lpw.c b/board/usb_a9g20_lpw/usb_a9g20_lpw.c
-new file mode 100644
-index 0000000..c372307
---- /dev/null
-+++ b/board/usb_a9g20_lpw/usb_a9g20_lpw.c
-@@ -0,0 +1,303 @@
-+/* ----------------------------------------------------------------------------
-+ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
-+ * ----------------------------------------------------------------------------
-+ * Copyright (c) 2008, Atmel Corporation
-+
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *
-+ * - Redistributions of source code must retain the above copyright notice,
-+ * this list of conditions and the disclaimer below.
-+ *
-+ * Atmel's name may not be used to endorse or promote products derived from
-+ * this software without specific prior written permission.
-+ *
-+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
-+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
-+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
-+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
-+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ * ----------------------------------------------------------------------------
-+ * File Name           : usb_a9g20_lpw.c
-+ * Object              :
-+ * Creation            : GH July 6th 2012
-+ *-----------------------------------------------------------------------------
-+ */
-+#include "../../include/part.h"
-+#include "../../include/gpio.h"
-+#include "../../include/pmc.h"
-+#include "../../include/debug.h"
-+#include "../../include/sdramc.h"
-+#include "../../include/main.h"
-+#ifdef CFG_NANDFLASH
-+#include "../../include/nandflash.h"
-+#endif
-+#ifdef CFG_DATAFLASH
-+#include "../../include/dataflash.h"
-+#endif
-+
-+static inline unsigned int get_cp15(void)
-+{
-+	unsigned int value;
-+	__asm__("mrc p15, 0, %0, c1, c0, 0" : "=r" (value));
-+	return value;
-+}
-+
-+static inline void set_cp15(unsigned int value)
-+{
-+	__asm__("mcr p15, 0, %0, c1, c0, 0" : : "r" (value));
-+}
-+
-+#ifdef CFG_HW_INIT
-+/*----------------------------------------------------------------------------*/
-+/* \fn    hw_init							      */
-+/* \brief This function performs very low level HW initialization	      */
-+/* This function is invoked as soon as possible during the c_startup	      */
-+/* The bss segment must be initialized					      */
-+/*----------------------------------------------------------------------------*/
-+void hw_init(void)
-+{
-+	unsigned int cp15;
-+	
-+	/* Configure PIOs */
-+	const struct pio_desc hw_pio[] = {
-+#ifdef CFG_DEBUG
-+		{"RXD", AT91C_PIN_PB(14), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"TXD", AT91C_PIN_PB(15), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+#endif
-+		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
-+	};
-+
-+	/* Disable watchdog */
-+	writel(AT91C_WDTC_WDDIS, AT91C_BASE_WDTC + WDTC_WDMR);
-+
-+	/* At this stage the main oscillator is supposed to be enabled
-+	 * PCK = MCK = MOSC */
-+	writel(0x00, AT91C_BASE_PMC + PMC_PLLICPR);
-+
-+	/* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */
-+	pmc_cfg_plla(PLLA_SETTINGS, PLL_LOCK_TIMEOUT);
-+
-+	/* PCK = PLLA/2 = 3 * MCK */
-+	pmc_cfg_mck(MCKR_SETTINGS, PLL_LOCK_TIMEOUT);
-+	/* Switch MCK on PLLA output */
-+	pmc_cfg_mck(MCKR_CSS_SETTINGS, PLL_LOCK_TIMEOUT);
-+
-+	/* Configure PLLB */
-+	pmc_cfg_pllb(PLLB_SETTINGS, PLL_LOCK_TIMEOUT);
-+
-+	/* Configure CP15 */
-+	cp15 = get_cp15();
-+	cp15 |= I_CACHE;
-+	set_cp15(cp15);
-+
-+	/* Configure the PIO controller */
-+	pio_setup(hw_pio);
-+
-+	/* Configure the EBI Slave Slot Cycle to 64 */
-+	writel((readl((AT91C_BASE_MATRIX + MATRIX_SCFG3)) & ~0xFF) | 0x40, (AT91C_BASE_MATRIX + MATRIX_SCFG3));
-+
-+#ifdef CFG_DEBUG
-+	/* Enable Debug messages on the DBGU */
-+	dbg_init(BAUDRATE(MASTER_CLOCK, 115200));
-+
-+	dbg_print("Start AT91Bootstrap...\n\r");
-+#endif /* CFG_DEBUG */
-+
-+#ifdef CFG_SDRAM
-+	/* Initialize the matrix (VDDIOSEL=0: memory voltage = 1.8V ) */
-+	writel((readl(AT91C_BASE_CCFG + CCFG_EBICSA) & ~0x00010000) | AT91C_EBI_CS1A_SDRAMC , AT91C_BASE_CCFG + CCFG_EBICSA);
-+
-+	/* Configure SDRAM Controller */
-+	sdram_init(	AT91C_SDRAMC_NC_9  |
-+				AT91C_SDRAMC_NR_13 |
-+				AT91C_SDRAMC_CAS_3 |
-+				AT91C_SDRAMC_NB_4_BANKS |
-+				AT91C_SDRAMC_DBW_32_BITS |
-+				AT91C_SDRAMC_TWR_3 |
-+				AT91C_SDRAMC_TRC_9 |
-+				AT91C_SDRAMC_TRP_3 |
-+				AT91C_SDRAMC_TRCD_3 |
-+				AT91C_SDRAMC_TRAS_6 |
-+				AT91C_SDRAMC_TXSR_10,		/* Control Register */
-+				(MASTER_CLOCK * 7)/1000000,	/* Refresh Timer Register */
-+                                AT91C_SDRAMC_MD_SDRAM);         /* SDRAM (no low power)   */
-+
-+#endif /* CFG_SDRAM */
-+}
-+#endif /* CFG_HW_INIT */
-+
-+#ifdef CFG_SDRAM
-+/*------------------------------------------------------------------------------*/
-+/* \fn    sdramc_hw_init							*/
-+/* \brief This function performs SDRAMC HW initialization			*/
-+/*------------------------------------------------------------------------------*/
-+void sdramc_hw_init(void)
-+{
-+	/* Configure PIOs */
-+/*	const struct pio_desc sdramc_pio[] = {
-+		{"D16", AT91C_PIN_PC(16), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D17", AT91C_PIN_PC(17), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D18", AT91C_PIN_PC(18), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D19", AT91C_PIN_PC(19), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D20", AT91C_PIN_PC(20), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D21", AT91C_PIN_PC(21), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D22", AT91C_PIN_PC(22), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D23", AT91C_PIN_PC(23), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D24", AT91C_PIN_PC(24), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D25", AT91C_PIN_PC(25), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D26", AT91C_PIN_PC(26), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D27", AT91C_PIN_PC(27), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D28", AT91C_PIN_PC(28), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D29", AT91C_PIN_PC(29), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D30", AT91C_PIN_PC(30), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D31", AT91C_PIN_PC(31), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
-+	};
-+*/
-+	/* Configure the SDRAMC PIO controller to output PCK0 */
-+/*	pio_setup(sdramc_pio); */
-+
-+	writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_ASR(0));
-+	writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_PDR(0));
-+
-+}
-+#endif /* CFG_SDRAM */
-+
-+#ifdef CFG_DATAFLASH
-+
-+/*------------------------------------------------------------------------------*/
-+/* \fn    df_recovery								*/
-+/* \brief This function erases DataFlash Page 0 if USR PB is pressed 		*/
-+/*        during boot sequence							*/
-+/*------------------------------------------------------------------------------*/
-+void df_recovery(AT91PS_DF pDf)
-+{
-+#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS1_DATAFLASH)
-+	/* Configure PIOs */
-+	const struct pio_desc usrpb[] = {
-+		{"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
-+		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
-+	};
-+
-+	/* Configure the PIO controller */
-+	writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
-+	pio_setup(usrpb);
-+	
-+	/* If USR PB is pressed during Boot sequence */
-+	/* Erase NandFlash block 0*/
-+	if ( !pio_get_value(AT91C_PIN_PB(10)) )
-+		df_page_erase(pDf, 0);
-+#endif
-+}
-+
-+/*------------------------------------------------------------------------------*/
-+/* \fn    df_hw_init								*/
-+/* \brief This function performs DataFlash HW initialization			*/
-+/*------------------------------------------------------------------------------*/
-+void df_hw_init(void)
-+{
-+	/* Configure PIOs */
-+	const struct pio_desc df_pio[] = {
-+		{"MISO",  AT91C_PIN_PA(0), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"MOSI",  AT91C_PIN_PA(1), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"SPCK",  AT91C_PIN_PA(2), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS0_DATAFLASH)
-+		{"NPCS0", AT91C_PIN_PA(3), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+#endif
-+#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS1_DATAFLASH)
-+		{"NPCS1", AT91C_PIN_PC(11), 0, PIO_DEFAULT, PIO_PERIPH_B},
-+#endif
-+		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
-+	};
-+
-+	/* Configure the PIO controller */
-+	pio_setup(df_pio);
-+}
-+#endif /* CFG_DATAFLASH */
-+
-+
-+
-+#ifdef CFG_NANDFLASH
-+/*------------------------------------------------------------------------------*/
-+/* \fn    nand_recovery						*/
-+/* \brief This function erases NandFlash Block 0 if USER PB is pressed 		*/
-+/*        during boot sequence							*/
-+/*------------------------------------------------------------------------------*/
-+#ifdef CFG_NANDFLASH_RECOVERY
-+static void nand_recovery(void)
-+{
-+	/* Configure PIOs */
-+	const struct pio_desc usrpb[] = {
-+		{"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
-+		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
-+	};
-+
-+	/* Configure the PIO controller */
-+	writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
-+	pio_setup(usrpb);
-+	
-+	/* If USER PB is pressed during Boot sequence */
-+	/* Erase NandFlash block 0*/
-+	if (!pio_get_value(AT91C_PIN_PB(10)) )
-+		AT91F_NandEraseBlock0();
-+}
-+#else
-+static void nand_recovery(void) {}
-+#endif
-+/*------------------------------------------------------------------------------*/
-+/* \fn    nandflash_hw_init							*/
-+/* \brief NandFlash HW init							*/
-+/*------------------------------------------------------------------------------*/
-+void nandflash_hw_init(void)
-+{
-+	/* Configure PIOs */
-+	const struct pio_desc nand_pio[] = {
-+		{"RDY_BSY", AT91C_PIN_PC(13), 0, PIO_PULLUP, PIO_INPUT},
-+		{"NANDCS",  AT91C_PIN_PC(14), 0, PIO_PULLUP, PIO_OUTPUT},
-+		{(char *) 0, 0, 0,  PIO_DEFAULT, PIO_PERIPH_A},
-+	};
-+
-+	/* Setup Smart Media, first enable the address range of CS3 in HMATRIX user interface */
-+	writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) | AT91C_EBI_CS3A_SM, AT91C_BASE_CCFG + CCFG_EBICSA);
-+		    
-+	/* Configure SMC CS3 */
-+ 	writel((AT91C_SM_NWE_SETUP | AT91C_SM_NCS_WR_SETUP | AT91C_SM_NRD_SETUP | AT91C_SM_NCS_RD_SETUP), AT91C_BASE_SMC + SMC_SETUP3);
-+  	writel((AT91C_SM_NWE_PULSE | AT91C_SM_NCS_WR_PULSE | AT91C_SM_NRD_PULSE | AT91C_SM_NCS_RD_PULSE), AT91C_BASE_SMC + SMC_PULSE3);
-+	writel((AT91C_SM_NWE_CYCLE | AT91C_SM_NRD_CYCLE)						, AT91C_BASE_SMC + SMC_CYCLE3);
-+	writel((AT91C_SMC_READMODE | AT91C_SMC_WRITEMODE | AT91C_SMC_NWAITM_NWAIT_DISABLE | 
-+  		AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS | AT91C_SM_TDF)						, AT91C_BASE_SMC + SMC_CTRL3);
-+
-+	/* Configure the PIO controller */
-+	writel((1 << AT91C_ID_PIOC), PMC_PCER + AT91C_BASE_PMC);
-+	pio_setup(nand_pio);
-+	
-+	nand_recovery();
-+}
-+
-+/*------------------------------------------------------------------------------*/
-+/* \fn    nandflash_cfg_16bits_dbw_init						*/
-+/* \brief Configure SMC in 16 bits mode						*/
-+/*------------------------------------------------------------------------------*/
-+void nandflash_cfg_16bits_dbw_init(void)
-+{
-+	writel(readl(AT91C_BASE_SMC + SMC_CTRL3) | AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS, AT91C_BASE_SMC + SMC_CTRL3);
-+}
-+
-+/*------------------------------------------------------------------------------*/
-+/* \fn    nandflash_cfg_8bits_dbw_init						*/
-+/* \brief Configure SMC in 8 bits mode						*/
-+/*------------------------------------------------------------------------------*/
-+void nandflash_cfg_8bits_dbw_init(void)
-+{
-+	writel((readl(AT91C_BASE_SMC + SMC_CTRL3) & ~(AT91C_SMC_DBW)) | AT91C_SMC_DBW_WIDTH_EIGTH_BITS, AT91C_BASE_SMC + SMC_CTRL3);
-+}
-+
-+#endif /* #ifdef CFG_NANDFLASH */
-diff --git a/crt0_gnu.S b/crt0_gnu.S
-index 042b617..002feef 100644
---- a/crt0_gnu.S
-+++ b/crt0_gnu.S
-@@ -106,6 +106,13 @@ _relocate_to_sram:
- #endif /* CFG_NORFLASH */
- 
- _setup_clocks:
-+/* Test if main osc is bypassed */
-+	ldr 	r0,=AT91C_PMC_MOR
-+	ldr 	r1, [r0]
-+	ldr 	r2,=AT91C_CKGR_OSCBYPASS 
-+	ands 	r1, r1, r2
-+	bne	_init_data	/* branch if OSCBYPASS=1 */
-+
- /* Test if main oscillator is enabled */
- 	ldr 	r0,=AT91C_PMC_SR
- 	ldr 	r1, [r0]
-diff --git a/include/part.h b/include/part.h
-index ba5985a..1d7392a 100644
---- a/include/part.h
-+++ b/include/part.h
-@@ -46,7 +46,11 @@
- 
- #ifdef AT91SAM9G20
- #include "AT91SAM9260_inc.h"
--#include "at91sam9g20ek.h"
-+	#ifdef at91sam9g20ek
-+	#include "at91sam9g20ek.h"
-+	#elif usb_a9g20_lpw
-+	#include "usb-a9g20-lpw.h"
-+	#endif
- #endif
- 
- #ifdef AT91SAM9261
--- 
-1.5.6.3
-

board/calao/usb-a9g20-lpw/barebox-2012.07.0-usb-a9g20-lpw.patch

@@ -1,12 +0,0 @@
-diff --git a/arch/arm/configs/usb_a9g20_defconfig b/arch/arm/configs/usb_a9g20_defconfig
-index 30bf380..7716e0e 100644
---- a/arch/arm/configs/usb_a9g20_defconfig
-+++ b/arch/arm/configs/usb_a9g20_defconfig
-@@ -15,6 +15,7 @@ CONFIG_HUSH_FANCY_PROMPT=y
- CONFIG_CMDLINE_EDITING=y
- CONFIG_AUTO_COMPLETE=y
- CONFIG_MENU=y
-+# CONFIG_ERRNO_MESSAGES is not set
- # CONFIG_CONSOLE_ACTIVATE_FIRST is not set
- CONFIG_CONSOLE_ACTIVATE_ALL=y
- CONFIG_PARTITION=y

board/calao/usb-a9g20-lpw/linux-3.4.4.config

@@ -1,105 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9G20=y
-CONFIG_MACH_USB_A9G20=y
-CONFIG_AT91_SLOW_CLOCK=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_NETDEVICES=y
-CONFIG_MII=y
-CONFIG_MACB=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_EVBUG=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_GPIO=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-# CONFIG_HWMON is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_RV3029C2=y
-CONFIG_EXT2_FS=y
-CONFIG_FUSE_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_XATTR=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y

board/freescale/mpc8315erdb/linux-3.8.config

@@ -1,107 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-# CONFIG_KALLSYMS is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_PMAC is not set
-CONFIG_PPC_83xx=y
-CONFIG_MPC831x_RDB=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_FSL_ELBC=y
-CONFIG_PROC_DEVICETREE=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_ATA=y
-CONFIG_SATA_FSL=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_LINEAR=y
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_E100=y
-CONFIG_GIANFAR=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MPC=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_WATCHDOG=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_FSL=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-CONFIG_USB_UHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_NET2280=y
-CONFIG_USB_ETH=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-CONFIG_RTC_DRV_DS1307=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_INOTIFY=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set

board/freescale/mpc8315erdb/readme.txt

@@ -1,62 +0,0 @@
-
-******************** WARNING ********************
-The compiled U-Boot binary is intended for NAND flash only!
-It won't work for NOR and will brick that bootloader!
-
-Also don't go playing around with different U-boot versions or flash targets
-unless you've got the necessary hardware and/or know-how to unbrick your kit.
-
-2013.04 is known good for NAND.
-******************** WARNING ********************
-
-You'll need to program the files created by buildroot into the flash.
-The fast way is to tftp transfer the files via one of the network interfaces.
-
-Alternatively you can transfer the files via serial console with an Ymodem
-file transfer from your terminal program by using a "loady" command
-from the u-boot prompt instead of the "tftp ..." commands stated below.
-Beware that serial console file transfers are quite slow!
-
-Remember to set the MPC8315ERDB switches to NAND boot if you want to use
-your newly built U-Boot.
-
-1. Program the new U-Boot binary to NAND flash (optional)
-    If you don't feel confident upgrading your bootloader then don't do it,
-    it's unnecessary most of the time.
-
-    => tftp $loadaddr u-boot-nand.bin
-    => nand erase 0 0x80000
-    => nand write $loadaddr 0 0x80000 $filesize
-
-2. Program the kernel to NAND flash
-
-    => tftp $loadaddr uImage
-    => nand erase 0x100000 0x1e0000
-    => nand write $loadaddr 0x100000 0x1e0000
-
-3. Program the DTB to NAND flash
-
-    => tftp $loadaddr mpc8315erdb.dtb
-    => nand erase 0x2e0000 0x20000
-    => nand write $loadaddr 0x2e0000 0x20000
-
-4. Program the root filesystem to NAND flash
-
-    => tftp $loadaddr rootfs.jffs2
-    => nand erase 0x400000 0x1c00000
-    => nand write $loadaddr 0x400000 $filesize
-
-5. Booting your new system
-
-    => setenv nandboot 'setenv bootargs root=/dev/mtdblock3 rootfstype=jffs2 console=$consoledev,$baudrate;nand read $fdtaddr 0x2e0000 0x20000;nand read $loadaddr 0x100000 0x1e0000;bootm $loadaddr - $fdtaddr'
-
-    If you want to set this boot option as default:
-
-    => setenv bootcmd 'run nandboot'
-    => saveenv
-
-    ...or for a single boot:
-
-    => run nandboot
-
-    You can login with user "root".

board/freescale/p1010rdb/linux-3.8.config

@@ -1,143 +0,0 @@
-CONFIG_PPC_85xx=y
-CONFIG_PHYS_64BIT=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_AUDIT=y
-CONFIG_IRQ_DOMAIN_DEBUG=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_P1010_RDB=y
-CONFIG_HIGHMEM=y
-CONFIG_SWIOTLB=y
-CONFIG_FORCE_MAX_ZONEORDER=12
-CONFIG_PCI=y
-CONFIG_PCI_MSI=y
-CONFIG_RAPIDIO=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_ARPD=y
-CONFIG_INET_ESP=y
-# CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_LRO=y
-CONFIG_IPV6=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_FTL=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_FSL_ELBC=y
-CONFIG_MTD_NAND_FSL_IFC=y
-CONFIG_PROC_DEVICETREE=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_EEPROM_LEGACY=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_ATA=y
-CONFIG_SATA_FSL=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-CONFIG_GIANFAR=y
-CONFIG_VITESSE_PHY=y
-CONFIG_FIXED_PHY=y
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-CONFIG_SERIAL_QE=m
-CONFIG_NVRAM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_CPM=m
-CONFIG_I2C_MPC=y
-CONFIG_SPI=y
-CONFIG_SPI_FSL_SPI=y
-CONFIG_SPI_FSL_ESPI=y
-CONFIG_GPIO_MPC8XXX=y
-# CONFIG_HWMON is not set
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_FSL=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MMC_SDHCI_OF_ESDHC=y
-CONFIG_EDAC=y
-CONFIG_EDAC_MM_EDAC=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_CMOS=y
-CONFIG_DMADEVICES=y
-CONFIG_FSL_DMA=y
-# CONFIG_NET_DMA is not set
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_USE_FOR_EXT23=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_SQUASHFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_CRC_T10DIF=y
-CONFIG_DEBUG_FS=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DEBUG_INFO=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_DEV_FSL_CAAM=y

board/freescale/p1010rdb/readme.txt

@@ -1,63 +0,0 @@
-
-******************** WARNING ********************
-The compiled U-Boot binary is intended for NOR flash only!
-It won't work for NAND or SPI and will brick those bootloaders!
-
-Also don't go playing around with different U-boot versions or flash targets
-unless you've got the necessary hardware and/or know-how to unbrick your kit.
-
-2013.04 is known good for NOR.
-******************** WARNING ********************
-
-You'll need to program the files created by buildroot into the flash.
-The fast way is to tftp transfer the files via one of the network interfaces.
-
-Alternatively you can transfer the files via serial console with an Ymodem
-file transfer from your terminal program by using a "loady" command
-from the u-boot prompt instead of the "tftp ..." commands stated below.
-Beware that serial console file transfers are quite slow!
-
-Remember to set the P1010RDB switches to NOR boot if you want to use
-your newly built U-Boot.
-
-1. Program the new U-Boot binary to NOR flash (optional)
-    If you don't feel confident upgrading your bootloader then don't do it,
-    it's unnecessary most of the time.
-
-    => tftp $loadaddr u-boot.bin
-    => protect off 0xeff80000 +$filesize
-    => erase 0xeff80000 +$filesize
-    => cp.b $loadaddr 0xeff80000 $filesize
-
-2. Program the DTB to NOR flash
-
-    => tftp $loadaddr p1010rdb.dtb
-    => erase 0xee000000 +$filesize
-    => cp.b $loadaddr 0xee000000 $filesize
-
-3. Program the kernel to NOR flash
-
-    => tftp $loadaddr uImage
-    => erase 0xee080000 +$filesize
-    => cp.b $loadaddr 0xee080000 $filesize
-
-4. Program the root filesystem to NOR flash
-
-    => tftp $loadaddr rootfs.jffs2
-    => erase 0xee800000 0xeff5ffff
-    => cp.b $loadaddr 0xee800000 $filesize
-
-5. Booting your new system
-
-    => setenv norboot 'setenv bootargs root=/dev/mtdblock2 rootfstype=jffs2 console=$consoledev,$baudrate;bootm 0xee080000 - 0xee000000'
-
-    If you want to set this boot option as default:
-
-    => setenv bootcmd 'run norboot'
-    => saveenv
-
-    ...or for a single boot:
-
-    => run norboot
-
-    You can login with user "root".

board/gnublin/README

@@ -1,48 +0,0 @@
-This the Buildroot support for the LPC3131 based Gnublin board (see here:
-http://en.gnublin.org/) and to the Elektor Linux board
-(http://www.elektor.com/news/elektor-presents-embedded-linux-made-easy.2147294.
-lynkx)
-
-Unfortunately currently the AD and the pwm modules are not supported, i'm about
-to add also those drivers as well to the current kernel later.
-
-Base kernel version: 3.7 (available here:
-https://gitorious.org/linux-3-7-gnublin/linux-3-7-gnublin/commits/gnublin-
-support)
-
-U-boot version: 2009.11 (available here:
-https://gitorious.org/u-boot-gnublin-support/u-boot-gnublin-support)
-
-
-Steps to create a bootable SD card (with the given config you need an at least
-500 MB SD card):
-
-1.Config buildroot with the gnublin_defconfig:
-
-$ make gnublin_defconfig
-
-2.Tweak the config for your needs:
-
-$ make menuconfig
-
-3.Build:
-
-$ make
-
-4.Create two partitions on your SD card, one with type of BootIt (fdisk ID: df),
-the size should be around 1M, and another partition with all of the left space
-on the card, and with the type of normal DOS partition.
-
-5.From the output/images directory dump the u-boot image to the BootIt partition
-(probably you have to modify the output /dev files according to your system):
-
-$ dd if=output/images/u-boot.bin of=/dev/sdc1
-
-6.Dump the root fs image as well:
-
-$ dd if=output/images/rootfs.ext2 of=/dev/sdc2
-
-7.Insert the SD card into the board's slot, and your board should boot up with
-your newly created system.
-
-Any feedback/report is welcome on the mr.zoltan.gyarmati[at]gmail.com

board/qemu/arm-nuri/readme.txt

@@ -1,10 +0,0 @@
-Run the emulation with:
-
-  qemu-system-arm -M nuri -kernel output/images/zImage -append "console=ttySAC1,115200" -smp 2 -serial null -serial stdio
-
-The login prompt will appear in the terminal that started Qemu. The
-graphical window is the framebuffer.
-
-Startup time is slow because of the SMP CPU emulation so be patient.
-
-Tested with QEMU 1.4.0

board/qemu/arm-versatile/linux-3.9.config

@@ -1,89 +0,0 @@
-CONFIG_ARCH_VERSATILE=y
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MACH_VERSATILE_AB=y
-CONFIG_PCI=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=1f03 mem=32M"
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_EEPROM_LEGACY=m
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_AMBAKMI=y
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=16
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=m
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_ARMCLCD=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_ACORN_8x8=y
-CONFIG_SOUND=y
-CONFIG_SND=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_ARMAACI=m
-CONFIG_MMC=y
-CONFIG_MMC_ARMMMCI=m
-CONFIG_EXT2_FS=y
-CONFIG_VFAT_FS=m
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_MINIX_FS=y
-CONFIG_ROMFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y

board/qemu/arm-versatile/readme.txt

@@ -1,8 +0,0 @@
-Run the emulation with:
-
-  qemu-system-arm -M versatilepb -kernel output/images/zImage -drive file=output/images/rootfs.ext2,if=scsi -append "root=/dev/sda console=ttyAMA0,115200" -serial stdio -net nic,model=smc91c111 -net user
-
-The login prompt will appear in the terminal that started Qemu. The
-graphical window is the framebuffer.
-
-Tested with QEMU 1.4.0

board/qemu/arm-vexpress/readme.txt

@@ -1,8 +0,0 @@
-Run the emulation with:
-
-  qemu-system-arm -M vexpress-a9 -kernel output/images/zImage -drive file=output/images/rootfs.ext2,if=sd -append "console=ttyAMA0,115200 root=/dev/mmcblk0" -serial stdio -net nic,model=lan9118 -net user
-
-The login prompt will appear in the terminal that started Qemu. The
-graphical window is the framebuffer.
-
-Tested with QEMU 1.4.0

board/qemu/microblazebe-mmu/linux-3.9.config

@@ -1,68 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="rootfs.cpio"
-CONFIG_INITRAMFS_COMPRESSION_GZIP=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_HOTPLUG is not set
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-# CONFIG_SIGNALFD is not set
-# CONFIG_SHMEM is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_OPT_LIB_ASM=y
-CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp"
-CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
-CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1
-CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
-CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1
-CONFIG_HZ_100=y
-CONFIG_MMU=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE_FORCE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_PROC_DEVICETREE=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_XILINX_EMACLITE=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_UARTLITE=y
-CONFIG_SERIAL_UARTLITE_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_CIFS=y
-CONFIG_CIFS_STATS=y
-CONFIG_CIFS_STATS2=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DEBUG_SLAB=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_EARLY_PRINTK=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set

board/qemu/microblazebe-mmu/readme.txt

@@ -1,7 +0,0 @@
-Run the emulation with:
-
- qemu-system-microblaze -M petalogix-s3adsp1800 -kernel output/images/linux.bin -serial stdio
-
-The login prompt will appear in the terminal that started Qemu.
-
-Tested with QEMU 1.4.0

board/qemu/microblazebe-mmu/system.dts

@@ -1,367 +0,0 @@
-/*
- * Device Tree Generator version: 1.1
- *
- * (C) Copyright 2007-2008 Xilinx, Inc.
- * (C) Copyright 2007-2009 Michal Simek
- *
- * Michal SIMEK <monstr@monstr.eu>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * CAUTION: This file is automatically generated by libgen.
- * Version: Xilinx EDK 10.1.03 EDK_K_SP3.6
- *
- * XPS project directory: Xilinx-ML505-ll_temac-sgdma-MMU-FDT-edk101
- */
-
-/dts-v1/;
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "xlnx,microblaze";
-	hard-reset-gpios = <&LEDs_8Bit 2 1>;
-	model = "testing";
-	DDR2_SDRAM: memory@90000000 {
-		device_type = "memory";
-		reg = < 0x90000000 0x10000000 >;
-	} ;
-	aliases {
-		ethernet0 = &Hard_Ethernet_MAC;
-		serial0 = &RS232_Uart_1;
-	} ;
-	chosen {
-		bootargs = "console=ttyUL0,115200 highres=on";
-		linux,stdout-path = "/plb@0/serial@84000000";
-	} ;
-	cpus {
-		#address-cells = <1>;
-		#cpus = <0x1>;
-		#size-cells = <0>;
-		microblaze_0: cpu@0 {
-			clock-frequency = <125000000>;
-			compatible = "xlnx,microblaze-7.10.d";
-			d-cache-baseaddr = <0x90000000>;
-			d-cache-highaddr = <0x9fffffff>;
-			d-cache-line-size = <0x10>;
-			d-cache-size = <0x2000>;
-			device_type = "cpu";
-			i-cache-baseaddr = <0x90000000>;
-			i-cache-highaddr = <0x9fffffff>;
-			i-cache-line-size = <0x10>;
-			i-cache-size = <0x2000>;
-			model = "microblaze,7.10.d";
-			reg = <0>;
-			timebase-frequency = <125000000>;
-			xlnx,addr-tag-bits = <0xf>;
-			xlnx,allow-dcache-wr = <0x1>;
-			xlnx,allow-icache-wr = <0x1>;
-			xlnx,area-optimized = <0x0>;
-			xlnx,cache-byte-size = <0x2000>;
-			xlnx,d-lmb = <0x1>;
-			xlnx,d-opb = <0x0>;
-			xlnx,d-plb = <0x1>;
-			xlnx,data-size = <0x20>;
-			xlnx,dcache-addr-tag = <0xf>;
-			xlnx,dcache-always-used = <0x1>;
-			xlnx,dcache-byte-size = <0x2000>;
-			xlnx,dcache-line-len = <0x4>;
-			xlnx,dcache-use-fsl = <0x1>;
-			xlnx,debug-enabled = <0x1>;
-			xlnx,div-zero-exception = <0x1>;
-			xlnx,dopb-bus-exception = <0x0>;
-			xlnx,dynamic-bus-sizing = <0x1>;
-			xlnx,edge-is-positive = <0x1>;
-			xlnx,family = "virtex5";
-			xlnx,endianness = <0x1>;
-			xlnx,fpu-exception = <0x1>;
-			xlnx,fsl-data-size = <0x20>;
-			xlnx,fsl-exception = <0x0>;
-			xlnx,fsl-links = <0x0>;
-			xlnx,i-lmb = <0x1>;
-			xlnx,i-opb = <0x0>;
-			xlnx,i-plb = <0x1>;
-			xlnx,icache-always-used = <0x1>;
-			xlnx,icache-line-len = <0x4>;
-			xlnx,icache-use-fsl = <0x1>;
-			xlnx,ill-opcode-exception = <0x1>;
-			xlnx,instance = "microblaze_0";
-			xlnx,interconnect = <0x1>;
-			xlnx,interrupt-is-edge = <0x0>;
-			xlnx,iopb-bus-exception = <0x0>;
-			xlnx,mmu-dtlb-size = <0x4>;
-			xlnx,mmu-itlb-size = <0x2>;
-			xlnx,mmu-tlb-access = <0x3>;
-			xlnx,mmu-zones = <0x10>;
-			xlnx,number-of-pc-brk = <0x1>;
-			xlnx,number-of-rd-addr-brk = <0x0>;
-			xlnx,number-of-wr-addr-brk = <0x0>;
-			xlnx,opcode-0x0-illegal = <0x1>;
-			xlnx,pvr = <0x2>;
-			xlnx,pvr-user1 = <0x0>;
-			xlnx,pvr-user2 = <0x0>;
-			xlnx,reset-msr = <0x0>;
-			xlnx,sco = <0x0>;
-			xlnx,unaligned-exceptions = <0x1>;
-			xlnx,use-barrel = <0x1>;
-			xlnx,use-dcache = <0x1>;
-			xlnx,use-div = <0x1>;
-			xlnx,use-ext-brk = <0x1>;
-			xlnx,use-ext-nm-brk = <0x1>;
-			xlnx,use-extended-fsl-instr = <0x0>;
-			xlnx,use-fpu = <0x2>;
-			xlnx,use-hw-mul = <0x2>;
-			xlnx,use-icache = <0x1>;
-			xlnx,use-interrupt = <0x1>;
-			xlnx,use-mmu = <0x3>;
-			xlnx,use-msr-instr = <0x1>;
-			xlnx,use-pcmp-instr = <0x1>;
-		} ;
-	} ;
-	mb_plb: plb@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "xlnx,plb-v46-1.03.a", "xlnx,plb-v46-1.00.a", "simple-bus";
-		ranges ;
-		FLASH: flash@a0000000 {
-			bank-width = <2>;
-			compatible = "xlnx,xps-mch-emc-2.00.a", "cfi-flash";
-			reg = < 0xa0000000 0x2000000 >;
-			xlnx,family = "virtex5";
-			xlnx,include-datawidth-matching-0 = <0x1>;
-			xlnx,include-datawidth-matching-1 = <0x0>;
-			xlnx,include-datawidth-matching-2 = <0x0>;
-			xlnx,include-datawidth-matching-3 = <0x0>;
-			xlnx,include-negedge-ioregs = <0x0>;
-			xlnx,include-plb-ipif = <0x1>;
-			xlnx,include-wrbuf = <0x1>;
-			xlnx,max-mem-width = <0x10>;
-			xlnx,mch-native-dwidth = <0x20>;
-			xlnx,mch-plb-clk-period-ps = <0x1f40>;
-			xlnx,mch-splb-awidth = <0x20>;
-			xlnx,mch0-accessbuf-depth = <0x10>;
-			xlnx,mch0-protocol = <0x0>;
-			xlnx,mch0-rddatabuf-depth = <0x10>;
-			xlnx,mch1-accessbuf-depth = <0x10>;
-			xlnx,mch1-protocol = <0x0>;
-			xlnx,mch1-rddatabuf-depth = <0x10>;
-			xlnx,mch2-accessbuf-depth = <0x10>;
-			xlnx,mch2-protocol = <0x0>;
-			xlnx,mch2-rddatabuf-depth = <0x10>;
-			xlnx,mch3-accessbuf-depth = <0x10>;
-			xlnx,mch3-protocol = <0x0>;
-			xlnx,mch3-rddatabuf-depth = <0x10>;
-			xlnx,mem0-width = <0x10>;
-			xlnx,mem1-width = <0x20>;
-			xlnx,mem2-width = <0x20>;
-			xlnx,mem3-width = <0x20>;
-			xlnx,num-banks-mem = <0x1>;
-			xlnx,num-channels = <0x0>;
-			xlnx,priority-mode = <0x0>;
-			xlnx,synch-mem-0 = <0x0>;
-			xlnx,synch-mem-1 = <0x0>;
-			xlnx,synch-mem-2 = <0x0>;
-			xlnx,synch-mem-3 = <0x0>;
-			xlnx,synch-pipedelay-0 = <0x2>;
-			xlnx,synch-pipedelay-1 = <0x2>;
-			xlnx,synch-pipedelay-2 = <0x2>;
-			xlnx,synch-pipedelay-3 = <0x2>;
-			xlnx,tavdv-ps-mem-0 = <0x1adb0>;
-			xlnx,tavdv-ps-mem-1 = <0x3a98>;
-			xlnx,tavdv-ps-mem-2 = <0x3a98>;
-			xlnx,tavdv-ps-mem-3 = <0x3a98>;
-			xlnx,tcedv-ps-mem-0 = <0x1adb0>;
-			xlnx,tcedv-ps-mem-1 = <0x3a98>;
-			xlnx,tcedv-ps-mem-2 = <0x3a98>;
-			xlnx,tcedv-ps-mem-3 = <0x3a98>;
-			xlnx,thzce-ps-mem-0 = <0x88b8>;
-			xlnx,thzce-ps-mem-1 = <0x1b58>;
-			xlnx,thzce-ps-mem-2 = <0x1b58>;
-			xlnx,thzce-ps-mem-3 = <0x1b58>;
-			xlnx,thzoe-ps-mem-0 = <0x1b58>;
-			xlnx,thzoe-ps-mem-1 = <0x1b58>;
-			xlnx,thzoe-ps-mem-2 = <0x1b58>;
-			xlnx,thzoe-ps-mem-3 = <0x1b58>;
-			xlnx,tlzwe-ps-mem-0 = <0x88b8>;
-			xlnx,tlzwe-ps-mem-1 = <0x0>;
-			xlnx,tlzwe-ps-mem-2 = <0x0>;
-			xlnx,tlzwe-ps-mem-3 = <0x0>;
-			xlnx,twc-ps-mem-0 = <0x2af8>;
-			xlnx,twc-ps-mem-1 = <0x3a98>;
-			xlnx,twc-ps-mem-2 = <0x3a98>;
-			xlnx,twc-ps-mem-3 = <0x3a98>;
-			xlnx,twp-ps-mem-0 = <0x11170>;
-			xlnx,twp-ps-mem-1 = <0x2ee0>;
-			xlnx,twp-ps-mem-2 = <0x2ee0>;
-			xlnx,twp-ps-mem-3 = <0x2ee0>;
-			xlnx,xcl0-linesize = <0x4>;
-			xlnx,xcl0-writexfer = <0x1>;
-			xlnx,xcl1-linesize = <0x4>;
-			xlnx,xcl1-writexfer = <0x1>;
-			xlnx,xcl2-linesize = <0x4>;
-			xlnx,xcl2-writexfer = <0x1>;
-			xlnx,xcl3-linesize = <0x4>;
-			xlnx,xcl3-writexfer = <0x1>;
-		} ;
-		Hard_Ethernet_MAC: xps-ll-temac@81c00000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "xlnx,compound";
-			ranges ;
-			ethernet@81c00000 {
-				compatible = "xlnx,xps-ll-temac-1.01.b", "xlnx,xps-ll-temac-1.00.a";
-				device_type = "network";
-				interrupt-parent = <&xps_intc_0>;
-				interrupts = < 5 2 >;
-				llink-connected = <&PIM3>;
-				local-mac-address = [ 00 0a 35 00 00 00 ];
-				reg = < 0x81c00000 0x40 >;
-				xlnx,bus2core-clk-ratio = <0x1>;
-				xlnx,phy-type = <0x1>;
-				xlnx,phyaddr = <0x1>;
-				xlnx,rxcsum = <0x0>;
-				xlnx,rxfifo = <0x1000>;
-				xlnx,temac-type = <0x0>;
-				xlnx,txcsum = <0x0>;
-				xlnx,txfifo = <0x1000>;
-			} ;
-		} ;
-		IIC_EEPROM: i2c@81600000 {
-			compatible = "xlnx,xps-iic-2.00.a";
-			interrupt-parent = <&xps_intc_0>;
-			interrupts = < 6 2 >;
-			reg = < 0x81600000 0x10000 >;
-			xlnx,clk-freq = <0x7735940>;
-			xlnx,family = "virtex5";
-			xlnx,gpo-width = <0x1>;
-			xlnx,iic-freq = <0x186a0>;
-			xlnx,scl-inertial-delay = <0x0>;
-			xlnx,sda-inertial-delay = <0x0>;
-			xlnx,ten-bit-adr = <0x0>;
-		} ;
-		LEDs_8Bit: gpio@81400000 {
-			compatible = "xlnx,xps-gpio-1.00.a";
-			interrupt-parent = <&xps_intc_0>;
-			interrupts = < 7 2 >;
-			reg = < 0x81400000 0x10000 >;
-			xlnx,all-inputs = <0x0>;
-			xlnx,all-inputs-2 = <0x0>;
-			xlnx,dout-default = <0x0>;
-			xlnx,dout-default-2 = <0x0>;
-			xlnx,family = "virtex5";
-			xlnx,gpio-width = <0x8>;
-			xlnx,interrupt-present = <0x1>;
-			xlnx,is-bidir = <0x1>;
-			xlnx,is-bidir-2 = <0x1>;
-			xlnx,is-dual = <0x0>;
-			xlnx,tri-default = <0xffffffff>;
-			xlnx,tri-default-2 = <0xffffffff>;
-			#gpio-cells = <2>;
-			gpio-controller;
-		} ;
-
-		gpio-leds {
-			compatible = "gpio-leds";
-
-			heartbeat {
-				label = "Heartbeat";
-				gpios = <&LEDs_8Bit 4 1>;
-				linux,default-trigger = "heartbeat";
-			};
-
-			yellow {
-				label = "Yellow";
-				gpios = <&LEDs_8Bit 5 1>;
-			};
-
-			red {
-				label = "Red";
-				gpios = <&LEDs_8Bit 6 1>;
-			};
-
-			green {
-				label = "Green";
-				gpios = <&LEDs_8Bit 7 1>;
-			};
-		} ;
-		RS232_Uart_1: serial@84000000 {
-			clock-frequency = <125000000>;
-			compatible = "xlnx,xps-uartlite-1.00.a";
-			current-speed = <115200>;
-			device_type = "serial";
-			interrupt-parent = <&xps_intc_0>;
-			interrupts = < 8 0 >;
-			port-number = <0>;
-			reg = < 0x84000000 0x10000 >;
-			xlnx,baudrate = <0x1c200>;
-			xlnx,data-bits = <0x8>;
-			xlnx,family = "virtex5";
-			xlnx,odd-parity = <0x0>;
-			xlnx,use-parity = <0x0>;
-		} ;
-		SysACE_CompactFlash: sysace@83600000 {
-			compatible = "xlnx,xps-sysace-1.00.a";
-			interrupt-parent = <&xps_intc_0>;
-			interrupts = < 4 2 >;
-			reg = < 0x83600000 0x10000 >;
-			xlnx,family = "virtex5";
-			xlnx,mem-width = <0x10>;
-		} ;
-		debug_module: debug@84400000 {
-			compatible = "xlnx,mdm-1.00.d";
-			reg = < 0x84400000 0x10000 >;
-			xlnx,family = "virtex5";
-			xlnx,interconnect = <0x1>;
-			xlnx,jtag-chain = <0x2>;
-			xlnx,mb-dbg-ports = <0x1>;
-			xlnx,uart-width = <0x8>;
-			xlnx,use-uart = <0x1>;
-			xlnx,write-fsl-ports = <0x0>;
-		} ;
-		mpmc@90000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "xlnx,mpmc-4.02.a";
-			ranges ;
-			PIM3: sdma@84600180 {
-				compatible = "xlnx,ll-dma-1.00.a";
-				interrupt-parent = <&xps_intc_0>;
-				interrupts = < 2 2 1 2 >;
-				reg = < 0x84600180 0x80 >;
-			} ;
-		} ;
-		xps_intc_0: interrupt-controller@81800000 {
-			#interrupt-cells = <0x2>;
-			compatible = "xlnx,xps-intc-1.00.a";
-			interrupt-controller ;
-			reg = < 0x81800000 0x10000 >;
-			xlnx,kind-of-intr = <0x100>;
-			xlnx,num-intr-inputs = <0x9>;
-		} ;
-		xps_timer_1: timer@83c00000 {
-			compatible = "xlnx,xps-timer-1.00.a";
-			interrupt-parent = <&xps_intc_0>;
-			interrupts = < 3 2 >;
-			reg = < 0x83c00000 0x10000 >;
-			xlnx,count-width = <0x20>;
-			xlnx,family = "virtex5";
-			xlnx,gen0-assert = <0x1>;
-			xlnx,gen1-assert = <0x1>;
-			xlnx,one-timer-only = <0x0>;
-			xlnx,trig0-assert = <0x1>;
-			xlnx,trig1-assert = <0x1>;
-		} ;
-	} ;
-}  ;

board/qemu/microblazeel-mmu/linux-3.9.config

@@ -1,67 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="rootfs.cpio"
-CONFIG_INITRAMFS_COMPRESSION_GZIP=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_HOTPLUG is not set
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-# CONFIG_SIGNALFD is not set
-# CONFIG_SHMEM is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp"
-CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
-CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1
-CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
-CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1
-CONFIG_HZ_100=y
-CONFIG_MMU=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE_FORCE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_PROC_DEVICETREE=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_XILINX_EMACLITE=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_UARTLITE=y
-CONFIG_SERIAL_UARTLITE_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_CIFS=y
-CONFIG_CIFS_STATS=y
-CONFIG_CIFS_STATS2=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DEBUG_SLAB=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_EARLY_PRINTK=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set

board/qemu/microblazeel-mmu/readme.txt

@@ -1,7 +0,0 @@
-Run the emulation with:
-
- qemu-system-microblazeel -M petalogix-s3adsp1800 -kernel output/images/linux.bin -serial stdio
-
-The login prompt will appear in the terminal that started Qemu.
-
-Tested with QEMU 1.4.0

board/qemu/microblazeel-mmu/system.dts

@@ -1,367 +0,0 @@
-/*
- * Device Tree Generator version: 1.1
- *
- * (C) Copyright 2007-2008 Xilinx, Inc.
- * (C) Copyright 2007-2009 Michal Simek
- *
- * Michal SIMEK <monstr@monstr.eu>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * CAUTION: This file is automatically generated by libgen.
- * Version: Xilinx EDK 10.1.03 EDK_K_SP3.6
- *
- * XPS project directory: Xilinx-ML505-ll_temac-sgdma-MMU-FDT-edk101
- */
-
-/dts-v1/;
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "xlnx,microblaze";
-	hard-reset-gpios = <&LEDs_8Bit 2 1>;
-	model = "testing";
-	DDR2_SDRAM: memory@90000000 {
-		device_type = "memory";
-		reg = < 0x90000000 0x10000000 >;
-	} ;
-	aliases {
-		ethernet0 = &Hard_Ethernet_MAC;
-		serial0 = &RS232_Uart_1;
-	} ;
-	chosen {
-		bootargs = "console=ttyUL0,115200 highres=on";
-		linux,stdout-path = "/plb@0/serial@84000000";
-	} ;
-	cpus {
-		#address-cells = <1>;
-		#cpus = <0x1>;
-		#size-cells = <0>;
-		microblaze_0: cpu@0 {
-			clock-frequency = <125000000>;
-			compatible = "xlnx,microblaze-7.10.d";
-			d-cache-baseaddr = <0x90000000>;
-			d-cache-highaddr = <0x9fffffff>;
-			d-cache-line-size = <0x10>;
-			d-cache-size = <0x2000>;
-			device_type = "cpu";
-			i-cache-baseaddr = <0x90000000>;
-			i-cache-highaddr = <0x9fffffff>;
-			i-cache-line-size = <0x10>;
-			i-cache-size = <0x2000>;
-			model = "microblaze,7.10.d";
-			reg = <0>;
-			timebase-frequency = <125000000>;
-			xlnx,addr-tag-bits = <0xf>;
-			xlnx,allow-dcache-wr = <0x1>;
-			xlnx,allow-icache-wr = <0x1>;
-			xlnx,area-optimized = <0x0>;
-			xlnx,cache-byte-size = <0x2000>;
-			xlnx,d-lmb = <0x1>;
-			xlnx,d-opb = <0x0>;
-			xlnx,d-plb = <0x1>;
-			xlnx,data-size = <0x20>;
-			xlnx,dcache-addr-tag = <0xf>;
-			xlnx,dcache-always-used = <0x1>;
-			xlnx,dcache-byte-size = <0x2000>;
-			xlnx,dcache-line-len = <0x4>;
-			xlnx,dcache-use-fsl = <0x1>;
-			xlnx,debug-enabled = <0x1>;
-			xlnx,div-zero-exception = <0x1>;
-			xlnx,dopb-bus-exception = <0x0>;
-			xlnx,dynamic-bus-sizing = <0x1>;
-			xlnx,edge-is-positive = <0x1>;
-			xlnx,family = "virtex5";
-			xlnx,endianness = <0x1>;
-			xlnx,fpu-exception = <0x1>;
-			xlnx,fsl-data-size = <0x20>;
-			xlnx,fsl-exception = <0x0>;
-			xlnx,fsl-links = <0x0>;
-			xlnx,i-lmb = <0x1>;
-			xlnx,i-opb = <0x0>;
-			xlnx,i-plb = <0x1>;
-			xlnx,icache-always-used = <0x1>;
-			xlnx,icache-line-len = <0x4>;
-			xlnx,icache-use-fsl = <0x1>;
-			xlnx,ill-opcode-exception = <0x1>;
-			xlnx,instance = "microblaze_0";
-			xlnx,interconnect = <0x1>;
-			xlnx,interrupt-is-edge = <0x0>;
-			xlnx,iopb-bus-exception = <0x0>;
-			xlnx,mmu-dtlb-size = <0x4>;
-			xlnx,mmu-itlb-size = <0x2>;
-			xlnx,mmu-tlb-access = <0x3>;
-			xlnx,mmu-zones = <0x10>;
-			xlnx,number-of-pc-brk = <0x1>;
-			xlnx,number-of-rd-addr-brk = <0x0>;
-			xlnx,number-of-wr-addr-brk = <0x0>;
-			xlnx,opcode-0x0-illegal = <0x1>;
-			xlnx,pvr = <0x2>;
-			xlnx,pvr-user1 = <0x0>;
-			xlnx,pvr-user2 = <0x0>;
-			xlnx,reset-msr = <0x0>;
-			xlnx,sco = <0x0>;
-			xlnx,unaligned-exceptions = <0x1>;
-			xlnx,use-barrel = <0x1>;
-			xlnx,use-dcache = <0x1>;
-			xlnx,use-div = <0x1>;
-			xlnx,use-ext-brk = <0x1>;
-			xlnx,use-ext-nm-brk = <0x1>;
-			xlnx,use-extended-fsl-instr = <0x0>;
-			xlnx,use-fpu = <0x2>;
-			xlnx,use-hw-mul = <0x2>;
-			xlnx,use-icache = <0x1>;
-			xlnx,use-interrupt = <0x1>;
-			xlnx,use-mmu = <0x3>;
-			xlnx,use-msr-instr = <0x1>;
-			xlnx,use-pcmp-instr = <0x1>;
-		} ;
-	} ;
-	mb_plb: plb@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "xlnx,plb-v46-1.03.a", "xlnx,plb-v46-1.00.a", "simple-bus";
-		ranges ;
-		FLASH: flash@a0000000 {
-			bank-width = <2>;
-			compatible = "xlnx,xps-mch-emc-2.00.a", "cfi-flash";
-			reg = < 0xa0000000 0x2000000 >;
-			xlnx,family = "virtex5";
-			xlnx,include-datawidth-matching-0 = <0x1>;
-			xlnx,include-datawidth-matching-1 = <0x0>;
-			xlnx,include-datawidth-matching-2 = <0x0>;
-			xlnx,include-datawidth-matching-3 = <0x0>;
-			xlnx,include-negedge-ioregs = <0x0>;
-			xlnx,include-plb-ipif = <0x1>;
-			xlnx,include-wrbuf = <0x1>;
-			xlnx,max-mem-width = <0x10>;
-			xlnx,mch-native-dwidth = <0x20>;
-			xlnx,mch-plb-clk-period-ps = <0x1f40>;
-			xlnx,mch-splb-awidth = <0x20>;
-			xlnx,mch0-accessbuf-depth = <0x10>;
-			xlnx,mch0-protocol = <0x0>;
-			xlnx,mch0-rddatabuf-depth = <0x10>;
-			xlnx,mch1-accessbuf-depth = <0x10>;
-			xlnx,mch1-protocol = <0x0>;
-			xlnx,mch1-rddatabuf-depth = <0x10>;
-			xlnx,mch2-accessbuf-depth = <0x10>;
-			xlnx,mch2-protocol = <0x0>;
-			xlnx,mch2-rddatabuf-depth = <0x10>;
-			xlnx,mch3-accessbuf-depth = <0x10>;
-			xlnx,mch3-protocol = <0x0>;
-			xlnx,mch3-rddatabuf-depth = <0x10>;
-			xlnx,mem0-width = <0x10>;
-			xlnx,mem1-width = <0x20>;
-			xlnx,mem2-width = <0x20>;
-			xlnx,mem3-width = <0x20>;
-			xlnx,num-banks-mem = <0x1>;
-			xlnx,num-channels = <0x0>;
-			xlnx,priority-mode = <0x0>;
-			xlnx,synch-mem-0 = <0x0>;
-			xlnx,synch-mem-1 = <0x0>;
-			xlnx,synch-mem-2 = <0x0>;
-			xlnx,synch-mem-3 = <0x0>;
-			xlnx,synch-pipedelay-0 = <0x2>;
-			xlnx,synch-pipedelay-1 = <0x2>;
-			xlnx,synch-pipedelay-2 = <0x2>;
-			xlnx,synch-pipedelay-3 = <0x2>;
-			xlnx,tavdv-ps-mem-0 = <0x1adb0>;
-			xlnx,tavdv-ps-mem-1 = <0x3a98>;
-			xlnx,tavdv-ps-mem-2 = <0x3a98>;
-			xlnx,tavdv-ps-mem-3 = <0x3a98>;
-			xlnx,tcedv-ps-mem-0 = <0x1adb0>;
-			xlnx,tcedv-ps-mem-1 = <0x3a98>;
-			xlnx,tcedv-ps-mem-2 = <0x3a98>;
-			xlnx,tcedv-ps-mem-3 = <0x3a98>;
-			xlnx,thzce-ps-mem-0 = <0x88b8>;
-			xlnx,thzce-ps-mem-1 = <0x1b58>;
-			xlnx,thzce-ps-mem-2 = <0x1b58>;
-			xlnx,thzce-ps-mem-3 = <0x1b58>;
-			xlnx,thzoe-ps-mem-0 = <0x1b58>;
-			xlnx,thzoe-ps-mem-1 = <0x1b58>;
-			xlnx,thzoe-ps-mem-2 = <0x1b58>;
-			xlnx,thzoe-ps-mem-3 = <0x1b58>;
-			xlnx,tlzwe-ps-mem-0 = <0x88b8>;
-			xlnx,tlzwe-ps-mem-1 = <0x0>;
-			xlnx,tlzwe-ps-mem-2 = <0x0>;
-			xlnx,tlzwe-ps-mem-3 = <0x0>;
-			xlnx,twc-ps-mem-0 = <0x2af8>;
-			xlnx,twc-ps-mem-1 = <0x3a98>;
-			xlnx,twc-ps-mem-2 = <0x3a98>;
-			xlnx,twc-ps-mem-3 = <0x3a98>;
-			xlnx,twp-ps-mem-0 = <0x11170>;
-			xlnx,twp-ps-mem-1 = <0x2ee0>;
-			xlnx,twp-ps-mem-2 = <0x2ee0>;
-			xlnx,twp-ps-mem-3 = <0x2ee0>;
-			xlnx,xcl0-linesize = <0x4>;
-			xlnx,xcl0-writexfer = <0x1>;
-			xlnx,xcl1-linesize = <0x4>;
-			xlnx,xcl1-writexfer = <0x1>;
-			xlnx,xcl2-linesize = <0x4>;
-			xlnx,xcl2-writexfer = <0x1>;
-			xlnx,xcl3-linesize = <0x4>;
-			xlnx,xcl3-writexfer = <0x1>;
-		} ;
-		Hard_Ethernet_MAC: xps-ll-temac@81c00000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "xlnx,compound";
-			ranges ;
-			ethernet@81c00000 {
-				compatible = "xlnx,xps-ll-temac-1.01.b", "xlnx,xps-ll-temac-1.00.a";
-				device_type = "network";
-				interrupt-parent = <&xps_intc_0>;
-				interrupts = < 5 2 >;
-				llink-connected = <&PIM3>;
-				local-mac-address = [ 00 0a 35 00 00 00 ];
-				reg = < 0x81c00000 0x40 >;
-				xlnx,bus2core-clk-ratio = <0x1>;
-				xlnx,phy-type = <0x1>;
-				xlnx,phyaddr = <0x1>;
-				xlnx,rxcsum = <0x0>;
-				xlnx,rxfifo = <0x1000>;
-				xlnx,temac-type = <0x0>;
-				xlnx,txcsum = <0x0>;
-				xlnx,txfifo = <0x1000>;
-			} ;
-		} ;
-		IIC_EEPROM: i2c@81600000 {
-			compatible = "xlnx,xps-iic-2.00.a";
-			interrupt-parent = <&xps_intc_0>;
-			interrupts = < 6 2 >;
-			reg = < 0x81600000 0x10000 >;
-			xlnx,clk-freq = <0x7735940>;
-			xlnx,family = "virtex5";
-			xlnx,gpo-width = <0x1>;
-			xlnx,iic-freq = <0x186a0>;
-			xlnx,scl-inertial-delay = <0x0>;
-			xlnx,sda-inertial-delay = <0x0>;
-			xlnx,ten-bit-adr = <0x0>;
-		} ;
-		LEDs_8Bit: gpio@81400000 {
-			compatible = "xlnx,xps-gpio-1.00.a";
-			interrupt-parent = <&xps_intc_0>;
-			interrupts = < 7 2 >;
-			reg = < 0x81400000 0x10000 >;
-			xlnx,all-inputs = <0x0>;
-			xlnx,all-inputs-2 = <0x0>;
-			xlnx,dout-default = <0x0>;
-			xlnx,dout-default-2 = <0x0>;
-			xlnx,family = "virtex5";
-			xlnx,gpio-width = <0x8>;
-			xlnx,interrupt-present = <0x1>;
-			xlnx,is-bidir = <0x1>;
-			xlnx,is-bidir-2 = <0x1>;
-			xlnx,is-dual = <0x0>;
-			xlnx,tri-default = <0xffffffff>;
-			xlnx,tri-default-2 = <0xffffffff>;
-			#gpio-cells = <2>;
-			gpio-controller;
-		} ;
-
-		gpio-leds {
-			compatible = "gpio-leds";
-
-			heartbeat {
-				label = "Heartbeat";
-				gpios = <&LEDs_8Bit 4 1>;
-				linux,default-trigger = "heartbeat";
-			};
-
-			yellow {
-				label = "Yellow";
-				gpios = <&LEDs_8Bit 5 1>;
-			};
-
-			red {
-				label = "Red";
-				gpios = <&LEDs_8Bit 6 1>;
-			};
-
-			green {
-				label = "Green";
-				gpios = <&LEDs_8Bit 7 1>;
-			};
-		} ;
-		RS232_Uart_1: serial@84000000 {
-			clock-frequency = <125000000>;
-			compatible = "xlnx,xps-uartlite-1.00.a";
-			current-speed = <115200>;
-			device_type = "serial";
-			interrupt-parent = <&xps_intc_0>;
-			interrupts = < 8 0 >;
-			port-number = <0>;
-			reg = < 0x84000000 0x10000 >;
-			xlnx,baudrate = <0x1c200>;
-			xlnx,data-bits = <0x8>;
-			xlnx,family = "virtex5";
-			xlnx,odd-parity = <0x0>;
-			xlnx,use-parity = <0x0>;
-		} ;
-		SysACE_CompactFlash: sysace@83600000 {
-			compatible = "xlnx,xps-sysace-1.00.a";
-			interrupt-parent = <&xps_intc_0>;
-			interrupts = < 4 2 >;
-			reg = < 0x83600000 0x10000 >;
-			xlnx,family = "virtex5";
-			xlnx,mem-width = <0x10>;
-		} ;
-		debug_module: debug@84400000 {
-			compatible = "xlnx,mdm-1.00.d";
-			reg = < 0x84400000 0x10000 >;
-			xlnx,family = "virtex5";
-			xlnx,interconnect = <0x1>;
-			xlnx,jtag-chain = <0x2>;
-			xlnx,mb-dbg-ports = <0x1>;
-			xlnx,uart-width = <0x8>;
-			xlnx,use-uart = <0x1>;
-			xlnx,write-fsl-ports = <0x0>;
-		} ;
-		mpmc@90000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "xlnx,mpmc-4.02.a";
-			ranges ;
-			PIM3: sdma@84600180 {
-				compatible = "xlnx,ll-dma-1.00.a";
-				interrupt-parent = <&xps_intc_0>;
-				interrupts = < 2 2 1 2 >;
-				reg = < 0x84600180 0x80 >;
-			} ;
-		} ;
-		xps_intc_0: interrupt-controller@81800000 {
-			#interrupt-cells = <0x2>;
-			compatible = "xlnx,xps-intc-1.00.a";
-			interrupt-controller ;
-			reg = < 0x81800000 0x10000 >;
-			xlnx,kind-of-intr = <0x100>;
-			xlnx,num-intr-inputs = <0x9>;
-		} ;
-		xps_timer_1: timer@83c00000 {
-			compatible = "xlnx,xps-timer-1.00.a";
-			interrupt-parent = <&xps_intc_0>;
-			interrupts = < 3 2 >;
-			reg = < 0x83c00000 0x10000 >;
-			xlnx,count-width = <0x20>;
-			xlnx,family = "virtex5";
-			xlnx,gen0-assert = <0x1>;
-			xlnx,gen1-assert = <0x1>;
-			xlnx,one-timer-only = <0x0>;
-			xlnx,trig0-assert = <0x1>;
-			xlnx,trig1-assert = <0x1>;
-		} ;
-	} ;
-}  ;

board/qemu/mips-malta/linux-3.9.config

@@ -1,76 +0,0 @@
-CONFIG_MIPS_MALTA=y
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_MIPS_MT_SMP=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_HZ_100=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=15
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-CONFIG_UTS_NS=y
-CONFIG_IPC_NS=y
-CONFIG_PID_NS=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PCI=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_MISC_DEVICES is not set
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO_I8042 is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_MFD_SUPPORT is not set
-CONFIG_FB=y
-CONFIG_FB_CIRRUS=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_QUOTA=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set

board/qemu/mips-malta/readme.txt

@@ -1,9 +0,0 @@
-Run the emulation with:
-
- qemu-system-mips -M malta -kernel output/images/vmlinux -serial stdio -hda output/images/rootfs.ext2 -append "root=/dev/hda"
-
-The login prompt will appear in the terminal that started Qemu. The
-graphical window is the framebuffer. No keyboard support has been
-enabled.
-
-Tested with QEMU 1.4.0

board/qemu/mips64-malta/linux-3.9.config

@@ -1,78 +0,0 @@
-CONFIG_MIPS_MALTA=y
-CONFIG_CPU_MIPS64_R1=y
-CONFIG_64BIT=y
-CONFIG_64BIT_PHYS_ADDR=y
-CONFIG_MIPS_MT_SMP=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_HZ_100=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=15
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-CONFIG_UTS_NS=y
-CONFIG_IPC_NS=y
-CONFIG_PID_NS=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PCI=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_MISC_DEVICES is not set
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO_I8042 is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_MFD_SUPPORT is not set
-CONFIG_FB=y
-CONFIG_FB_CIRRUS=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_QUOTA=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set

board/qemu/mips64-malta/readme.txt

@@ -1,11 +0,0 @@
-Run the emulation with:
-
- qemu-system-mips64 -M malta -kernel output/images/vmlinux -serial stdio -hda output/images/rootfs.ext2 -append "root=/dev/hda"
-
-The login prompt will appear in the terminal that started Qemu. The
-graphical window is the framebuffer. No keyboard support has been
-enabled.
-
-This configuration is known to be flaky.
-
-Tested with QEMU 1.4.0

board/qemu/mipsel-malta/linux-3.9.config

@@ -1,77 +0,0 @@
-CONFIG_MIPS_MALTA=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_MIPS_MT_SMP=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_HZ_100=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=15
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-CONFIG_UTS_NS=y
-CONFIG_IPC_NS=y
-CONFIG_PID_NS=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PCI=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_MISC_DEVICES is not set
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO_I8042 is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_MFD_SUPPORT is not set
-CONFIG_FB=y
-CONFIG_FB_CIRRUS=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_QUOTA=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set

board/qemu/mipsel-malta/readme.txt

@@ -1,9 +0,0 @@
-Run the emulation with:
-
- qemu-system-mipsel -M malta -kernel output/images/vmlinux -serial stdio -hda output/images/rootfs.ext2 -append "root=/dev/hda"
-
-The login prompt will appear in the terminal that started Qemu. The
-graphical window is the framebuffer. No keyboard support has been
-enabled.
-
-Tested with QEMU 1.4.0

board/qemu/powerpc-g3beige/linux-3.8.config

@@ -1,86 +0,0 @@
-CONFIG_ALTIVEC=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_COMPAT_BRK=y
-CONFIG_SLAB=y
-CONFIG_LBDAF=y
-CONFIG_PPC_PMAC=y
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-CONFIG_PPC601_SYNC_FIX=y
-CONFIG_HIGHMEM=y
-CONFIG_NO_HZ=y
-CONFIG_BINFMT_ELF=y
-CONFIG_PROC_DEVICETREE=y
-CONFIG_PM=y
-CONFIG_SECCOMP=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-CONFIG_YENTA=y
-CONFIG_ADVANCED_OPTIONS=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_INET_LRO=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
-CONFIG_BLK_DEV=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_IDE=y
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_PROC_FS=y
-CONFIG_BLK_DEV_CMD64X=y
-CONFIG_BLK_DEV_IDE_PMAC=y
-CONFIG_IEEE1394=y
-CONFIG_IEEE1394_OHCI1394=y
-CONFIG_IEEE1394_ETH1394=y
-CONFIG_IEEE1394_RAWIO=y
-CONFIG_IEEE1394_VIDEO1394=y
-CONFIG_IEEE1394_DV1394=y
-CONFIG_MACINTOSH_DRIVERS=y
-CONFIG_ADB=y
-CONFIG_ADB_CUDA=y
-CONFIG_ADB_PMU=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MACE=y
-CONFIG_BMAC=y
-CONFIG_HAPPYMEAL=y
-CONFIG_SUNGEM=y
-CONFIG_CASSINI=y
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=y
-CONFIG_NE2K_PCI=y
-CONFIG_8139CP=y
-CONFIG_8139TOO=y
-CONFIG_8139TOO_PIO=y
-CONFIG_SERIO=y
-CONFIG_SERIAL_PMACZILOG=y
-CONFIG_SERIAL_PMACZILOG_TTYS=y
-CONFIG_SERIAL_PMACZILOG_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_SSB=y
-CONFIG_SSB_PCIHOST=y
-CONFIG_SSB_PCMCIAHOST=y
-CONFIG_SSB_DRIVER_PCICORE=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_MISC_FILESYSTEMS=y
-CONFIG_SQUASHFS=y
-CONFIG_LIBCRC32C=y
-CONFIG_BOOTX_TEXT=y
-CONFIG_CRYPTO_HW=y

board/qemu/powerpc-g3beige/readme.txt

@@ -1,8 +0,0 @@
-Run the emulation with:
-
-  qemu-system-ppc -M g3beige -kernel output/images/vmlinux -hda output/images/rootfs.ext2 -append "console=ttyS0 root=/dev/hdc" -serial stdio
-
-The login prompt will appear in the terminal that started Qemu. The
-graphical window is the framebuffer.
-
-Tested with QEMU 1.4.0

board/qemu/powerpc-mpc8544ds/readme.txt

@@ -1,7 +0,0 @@
-Run the emulation with:
-
- qemu-system-ppc -M mpc8544ds -kernel output/images/vmlinux -serial stdio
-
-The login prompt will appear in the terminal that started Qemu.
-
-Tested with QEMU 1.4.0

board/qemu/powerpc-virtex-ml507/readme.txt

@@ -1,8 +0,0 @@
-Run the emulation with:
-
- cp output/images/virtex440-ml507.dtb ppc.dtb
- qemu-system-ppc -M virtex-ml507 -kernel output/images/vmlinux -m 256 -nographic -append "console=ttyS0"
-
-The login prompt will appear in the terminal that started Qemu.
-
-Tested with QEMU 1.4.0

board/qemu/sh4-r2d/linux-3.2.config

@@ -1,105 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7751R=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_RTS7751R2D=y
-CONFIG_RTS7751R2D_PLUS=y
-CONFIG_HEARTBEAT=y
-CONFIG_PCI=y
-CONFIG_HOTPLUG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_FW_LOADER=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_8139CP=y
-CONFIG_8139TOO=y
-# CONFIG_8139TOO_PIO is not set
-# CONFIG_WLAN is not set
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_SPI=y
-CONFIG_SPI_SH_SCI=y
-CONFIG_MFD_SM501=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=m
-CONFIG_FB_SH_MOBILE_HDMI=m
-CONFIG_FB_SM501=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_LOGO_LINUX_CLUT224 is not set
-# CONFIG_LOGO_SUPERH_MONO is not set
-# CONFIG_LOGO_SUPERH_VGA16 is not set
-CONFIG_SOUND=y
-CONFIG_SND=m
-CONFIG_SND_YMFPCI=m
-CONFIG_SOUND_PRIME=m
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_LIBUSUAL=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_R9701=y
-CONFIG_EXT2_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_MINIX_FS=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_DEBUG_FS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_T10DIF=y

board/qemu/sh4-r2d/readme.txt

@@ -1,8 +0,0 @@
-Run the emulation with:
-
-  qemu-system-sh4 -M r2d -kernel output/images/zImage -drive file=output/images/rootfs.ext2,if=ide -append "root=/dev/sda console=ttySC1,115200 noiotrap" -serial null -serial stdio
-
-The login prompt will appear in the terminal that started Qemu.
-The graphical window is the framebuffer.
-
-Tested with QEMU 1.4.0

board/qemu/sparc-ss10/readme.txt

@@ -1,8 +0,0 @@
-Run the emulation with:
-
-  qemu-system-sparc -M SS-10 -kernel output/images/zImage -drive file=output/images/rootfs.ext2 -append "root=/dev/sda console=ttyS0,115200" -serial stdio
-
-The login prompt will appear in the terminal that started Qemu.
-The graphical window is the framebuffer.
-
-Tested with QEMU 1.4.0

board/qemu/x86/linux-3.9.config

@@ -1,67 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-# CONFIG_COMPAT_BRK is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_X86_EXTENDED_PLATFORM is not set
-# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
-# CONFIG_MTRR_SANITIZER is not set
-# CONFIG_SECCOMP is not set
-# CONFIG_RELOCATABLE is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-# CONFIG_BLK_DEV is not set
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_ATA_PIIX=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_NE2K_PCI=y
-CONFIG_8139CP=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_MFD_SUPPORT is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_HDA_INTEL=y
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_X86_PLATFORM_DEVICES is not set
-# CONFIG_DMIID is not set
-CONFIG_EXT2_FS=y
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_FRAME_POINTER is not set
-# CONFIG_X86_VERBOSE_BOOTUP is not set
-# CONFIG_VIRTUALIZATION is not set

board/qemu/x86/readme.txt

@@ -1,7 +0,0 @@
-Run the emulation with:
-
-  qemu-system-i386 -M pc -kernel output/images/bzImage -drive file=output/images/rootfs.ext2,if=ide -append root=/dev/sda
-
-The login prompt will appear in the graphical window.
-
-Tested with QEMU 1.4.0

board/qemu/x86_64/linux-3.9.config

@@ -1,67 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-# CONFIG_COMPAT_BRK is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_X86_EXTENDED_PLATFORM is not set
-# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
-# CONFIG_MTRR_SANITIZER is not set
-# CONFIG_SECCOMP is not set
-# CONFIG_RELOCATABLE is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-# CONFIG_BLK_DEV is not set
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_ATA_PIIX=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_NE2K_PCI=y
-CONFIG_8139CP=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_MFD_SUPPORT is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_HDA_INTEL=y
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_X86_PLATFORM_DEVICES is not set
-# CONFIG_DMIID is not set
-CONFIG_EXT2_FS=y
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_FRAME_POINTER is not set
-# CONFIG_X86_VERBOSE_BOOTUP is not set
-# CONFIG_VIRTUALIZATION is not set

board/qemu/x86_64/readme.txt

@@ -1,7 +0,0 @@
-Run the emulation with:
-
-  qemu-system-x86_64 -M pc -kernel output/images/bzImage -drive file=output/images/rootfs.ext2,if=ide -append root=/dev/sda
-
-The login prompt will appear in the graphical window.
-
-Tested with QEMU 1.4.0

board/raspberrypi/readme.txt

@@ -1,127 +0,0 @@
-RaspberryPi
-
-Intro
-=====
-
-To be able to use your RaspberryPi board with the images generated by
-Buildroot, you have a prior choice to make, will you use:
-    - Volatile rootfs in RAM (The rootfs is an initramfs) or
-    - Persistent rootfs on the SDCard
-
-Also, a good source of information is http://elinux.org/R-Pi_Hub
-
-Volatile rootfs
-===============
-
-How to build it
----------------
-
-You need to use the rpi_defconfig, to do so:
- * make rpi_defconfig
-
-Then, you need to select the kind of images you want:
- * make menuconfig
- * Select "Filesystem images"
- * Select "initial RAM filesystem linked into linux kernel"
-
-What is generated
------------------
-
-After building, you should obtain this tree:
-
-    output/images/
-    +-- rootfs.tar
-    +-- rpi-firmware
-    |   +-- bootcode.bin
-    |   +-- config.txt
-    |   +-- fixup_cd.dat
-    |   +-- fixup.dat
-    |   +-- start_cd.elf
-    |   `-- start.elf
-    `-- zImage
-
-Note : rootfs.tar will only be there if you kept "tar the root filesystem"
-option selected in "Filesystem images".
-
-Where should the binaries be copied on the SDCard
--------------------------------------------------
-
-Your SDCard must have its first partition using fat32 and marked bootable.
-
-At the root of the partition, the RaspberryPi must find the following files:
-
- * bootcode.bin
- * config.txt
- * fixup_cd.dat
- * fixup.dat
- * start_cd.elf
- * start.elf
- * zImage
-
-So you should copy the entire content of output/images/rpi-firmware along with
-zImage.
-
-Note: You can create any number of partitions you desire, the only requirement
-is that the first partition must be using fat32 and bootable.
-
-Persistent rootfs
-=================
-
-How to build it
----------------
-
-You only need to use the rpi_defconfig, to do so:
- * make rpi_defconfig
-
-What is generated
------------------
-
-After building, you should obtain this tree:
-
-    output/images/
-    +-- rootfs.tar
-    +-- rpi-firmware
-    |   +-- bootcode.bin
-    |   +-- config.txt
-    |   +-- fixup_cd.dat
-    |   +-- fixup.dat
-    |   +-- start_cd.elf
-    |   `-- start.elf
-    `-- zImage
-
-Where should the binaries be copied on the SDCard
--------------------------------------------------
-
-Your SDCard must have its first partition using fat32 and marked bootable.
-It should also have another partition which will contain your rootfs, it should
-be partitioned as ext4.
-
-Boot partition
-~~~~~~~~~~~~~~
-
-The first partition will contain everything used to boot the RaspberryPi.
-You must copy theses files at the root of partition:
-
- * bootcode.bin
- * config.txt
- * fixup_cd.dat
- * fixup.dat
- * start_cd.elf
- * start.elf
- * zImage
-
-So you should copy the entire content of output/images/rpi-firmware along with
-zImage.
-
-Rootfs partition
-~~~~~~~~~~~~~~~~
-
-The second partition will contain your rootfs.
-Simply extract (as root!) the contents of the rootfs.tar archive
-into this partition.
-
-For example: (Assuming mountpoint is a directory and exist)
-
- $ sudo mount /dev/sdXY /mnt/mountpoint
- $ sudo tar xf rootfs.tar -C /mnt/mountpoint
-

board/telit/evk-pro3/barebox-2013.04.0-0001-watchdog-add-keep-alive-support.patch

@@ -1,88 +0,0 @@
-From b5e57a9f158a293b1151638336478af8a5aad0f0 Mon Sep 17 00:00:00 2001
-From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-Date: Wed, 14 Nov 2012 19:16:35 +0800
-Subject: [PATCH 1/5] watchdog: add keep alive support
-
-this will allow to ping the watchdog via poller
-
-Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
----
- drivers/watchdog/Kconfig   |  1 +
- drivers/watchdog/wd_core.c | 21 +++++++++++++++++++++
- include/watchdog.h         |  2 ++
- 3 files changed, 24 insertions(+)
-
-diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
-index 2e2900c..0b4dc84 100644
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -4,6 +4,7 @@ config WATCHDOG_IMX_RESET_SOURCE
- 
- menuconfig WATCHDOG
- 	bool "Watchdog support"
-+	select GENERIC_POLLER
- 	help
- 	  Many platforms support a watchdog to keep track of a working machine.
- 	  This framework provides routines to handle these watchdogs.
-diff --git a/drivers/watchdog/wd_core.c b/drivers/watchdog/wd_core.c
-index 3d0cfc6..a1b9e28 100644
---- a/drivers/watchdog/wd_core.c
-+++ b/drivers/watchdog/wd_core.c
-@@ -17,18 +17,39 @@
- #include <errno.h>
- #include <linux/ctype.h>
- #include <watchdog.h>
-+#include <poller.h>
- 
- /*
-  * Note: this simple framework supports one watchdog only.
-  */
- static struct watchdog *watchdog;
- 
-+static void watchdog_poller_func(struct poller_struct *poller)
-+{
-+	watchdog->keep_alive(watchdog);
-+}
-+
-+static struct poller_struct watchdog_poller = {
-+	.func = watchdog_poller_func,
-+};
-+
- int watchdog_register(struct watchdog *wd)
- {
- 	if (watchdog != NULL)
- 		return -EBUSY;
- 
- 	watchdog = wd;
-+
-+	if (watchdog->keep_alive) {
-+		int ret;
-+
-+		ret = poller_register(&watchdog_poller);
-+		if (ret) {
-+			watchdog = NULL;
-+			return ret;
-+		}
-+	}
-+
- 	return 0;
- }
- EXPORT_SYMBOL(watchdog_register);
-diff --git a/include/watchdog.h b/include/watchdog.h
-index 3e2d08e..d5ecf2f 100644
---- a/include/watchdog.h
-+++ b/include/watchdog.h
-@@ -13,8 +13,10 @@
- #ifndef INCLUDE_WATCHDOG_H
- # define INCLUDE_WATCHDOG_H
- 
-+
- struct watchdog {
- 	int (*set_timeout)(struct watchdog *, unsigned);
-+	void (*keep_alive)(struct watchdog *);
- };
- 
- int watchdog_register(struct watchdog *);
--- 
-1.8.1.4
-

board/telit/evk-pro3/barebox-2013.04.0-0002-watchdog-add-at91sam9-watchdog-support.patch

@@ -1,228 +0,0 @@
-From e1d54ffb987c346c45c20968be34c50c62a91c07 Mon Sep 17 00:00:00 2001
-From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-Date: Wed, 14 Nov 2012 19:17:47 +0800
-Subject: [PATCH 2/5] watchdog: add at91sam9 watchdog support
-
-with keep alive support
-
-Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
----
- drivers/watchdog/Kconfig        |   7 +++
- drivers/watchdog/Makefile       |   1 +
- drivers/watchdog/at91sam9_wdt.c | 131 ++++++++++++++++++++++++++++++++++++++++
- drivers/watchdog/at91sam9_wdt.h |  38 ++++++++++++
- 4 files changed, 177 insertions(+)
- create mode 100644 drivers/watchdog/at91sam9_wdt.c
- create mode 100644 drivers/watchdog/at91sam9_wdt.h
-
-diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
-index 0b4dc84..98a21d7 100644
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -11,6 +11,13 @@ menuconfig WATCHDOG
- 
- if WATCHDOG
- 
-+config WATCHDOG_AT91SAM9X
-+	tristate "AT91SAM9X / AT91CAP9 watchdog"
-+	depends on ARCH_AT91
-+	help
-+	  Watchdog timer embedded into AT91SAM9X and AT91CAP9 chips. This will
-+	  reboot your system when the timeout is reached.
-+
- config WATCHDOG_MXS28
- 	bool "i.MX28"
- 	depends on ARCH_IMX28
-diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
-index f522b88..3d15d52 100644
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -1,3 +1,4 @@
- obj-$(CONFIG_WATCHDOG) += wd_core.o
-+obj-$(CONFIG_WATCHDOG_AT91SAM9X) += at91sam9_wdt.o
- obj-$(CONFIG_WATCHDOG_MXS28) += im28wd.o
- obj-$(CONFIG_WATCHDOG_IMX_RESET_SOURCE) += imxwd.o
-diff --git a/drivers/watchdog/at91sam9_wdt.c b/drivers/watchdog/at91sam9_wdt.c
-new file mode 100644
-index 0000000..203d83a
---- /dev/null
-+++ b/drivers/watchdog/at91sam9_wdt.c
-@@ -0,0 +1,131 @@
-+/*
-+ * (c) 2012 Juergen Beisert <kernel@pengutronix.de>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * Note: this driver works for the i.MX28 SoC. It might work for the
-+ * i.MX23 Soc as well, but is not tested yet.
-+ */
-+
-+#include <common.h>
-+#include <init.h>
-+#include <io.h>
-+#include <errno.h>
-+#include <malloc.h>
-+#include <watchdog.h>
-+
-+#include "at91sam9_wdt.h"
-+
-+struct at91sam9_wdt {
-+	struct watchdog wdt;
-+	void __iomem *base;
-+};
-+
-+#define to_at91sam9_wdt(h) container_of(h, struct at91sam9_wdt, wdt)
-+
-+#define wdt_read(at91wdt, field) \
-+	__raw_readl(at91wdt->base + field)
-+#define wdt_write(at91wdt, field, val) \
-+	__raw_writel((val), at91wdt->base + field)
-+
-+static void at91sam9_wdt_keep_alive(struct watchdog *wdt)
-+{
-+	struct at91sam9_wdt *at91wdt = to_at91sam9_wdt(wdt);
-+
-+	wdt_write(at91wdt, AT91_WDT_CR, AT91_WDT_KEY | AT91_WDT_WDRSTT);
-+}
-+
-+static int at91sam9_wdt_settimeout(struct watchdog *wdt, unsigned int timeout)
-+{
-+	struct at91sam9_wdt *at91wdt = to_at91sam9_wdt(wdt);
-+	unsigned int reg;
-+	unsigned int mr;
-+
-+	/* Check if disabled */
-+	mr = wdt_read(at91wdt, AT91_WDT_MR);
-+	if (mr & AT91_WDT_WDDIS) {
-+		pr_err("sorry, watchdog is disabled\n");
-+		return -EIO;
-+	}
-+
-+	if (!timeout) {
-+		wdt_write(at91wdt, AT91_WDT_MR, AT91_WDT_WDDIS);
-+		return 0;
-+	}
-+
-+	/*
-+	 * All counting occurs at SLOW_CLOCK / 128 = 256 Hz
-+	 *
-+	 * Since WDV is a 12-bit counter, the maximum period is
-+	 * 4096 / 256 = 16 seconds.
-+	 */
-+	reg = AT91_WDT_WDRSTEN	/* causes watchdog reset */
-+		/* | AT91_WDT_WDRPROC	causes processor reset only */
-+		| AT91_WDT_WDDBGHLT	/* disabled in debug mode */
-+		| AT91_WDT_WDD		/* restart at any time */
-+		| (timeout & AT91_WDT_WDV);  /* timer value */
-+	wdt_write(at91wdt, AT91_WDT_MR, reg);
-+
-+	return 0;
-+}
-+
-+static int at91sam9_wdt_probe(struct device_d *dev)
-+{
-+	struct at91sam9_wdt *priv;
-+	struct watchdog *wdt;
-+	int ret;
-+	unsigned int mr;
-+
-+	priv = xzalloc(sizeof(struct at91sam9_wdt));
-+	priv->base = dev_request_mem_region(dev, 0);
-+	wdt = &priv->wdt;
-+
-+	wdt->set_timeout = at91sam9_wdt_settimeout;
-+	wdt->keep_alive = at91sam9_wdt_keep_alive;
-+
-+	/* Check if disabled */
-+	mr = wdt_read(priv, AT91_WDT_MR);
-+	if (mr & AT91_WDT_WDDIS) {
-+		dev_err(dev, "sorry, watchdog is disabled\n");
-+		ret = -EIO;
-+		goto err;
-+	}
-+
-+	ret = watchdog_register(wdt);
-+	if (ret != 0)
-+		goto err;
-+
-+	dev->priv = priv;
-+	return 0;
-+
-+err:
-+	free(priv);
-+	return ret;
-+}
-+
-+static void at91sam9_wdt_remove(struct device_d *dev)
-+{
-+	struct at91sam9_wdt *priv= dev->priv;
-+	watchdog_deregister(&priv->wdt);
-+	free(priv);
-+}
-+
-+static struct driver_d at91sam9_wdt_driver = {
-+	.name	= "at91sam9_wdt",
-+	.probe	= at91sam9_wdt_probe,
-+	.remove = at91sam9_wdt_remove,
-+};
-+
-+static int at91sam9_wdt_init(void)
-+{
-+	return platform_driver_register(&at91sam9_wdt_driver);
-+}
-+coredevice_initcall(at91sam9_wdt_init);
-diff --git a/drivers/watchdog/at91sam9_wdt.h b/drivers/watchdog/at91sam9_wdt.h
-new file mode 100644
-index 0000000..2b68c1a
---- /dev/null
-+++ b/drivers/watchdog/at91sam9_wdt.h
-@@ -0,0 +1,38 @@
-+/*
-+ * drivers/watchdog/at91sam9_wdt.h
-+ *
-+ * Copyright (C) 2007 Andrew Victor
-+ * Copyright (C) 2007 Atmel Corporation.
-+ *
-+ * Watchdog Timer (WDT) - System peripherals regsters.
-+ * Based on AT91SAM9261 datasheet revision D.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#ifndef AT91_WDT_H
-+#define AT91_WDT_H
-+
-+#define AT91_WDT_CR		0x00			/* Watchdog Control Register */
-+#define		AT91_WDT_WDRSTT		(1    << 0)		/* Restart */
-+#define		AT91_WDT_KEY		(0xa5 << 24)		/* KEY Password */
-+
-+#define AT91_WDT_MR		0x04			/* Watchdog Mode Register */
-+#define		AT91_WDT_WDV		(0xfff << 0)		/* Counter Value */
-+#define		AT91_WDT_WDFIEN		(1     << 12)		/* Fault Interrupt Enable */
-+#define		AT91_WDT_WDRSTEN	(1     << 13)		/* Reset Processor */
-+#define		AT91_WDT_WDRPROC	(1     << 14)		/* Timer Restart */
-+#define		AT91_WDT_WDDIS		(1     << 15)		/* Watchdog Disable */
-+#define		AT91_WDT_WDD		(0xfff << 16)		/* Delta Value */
-+#define		AT91_WDT_WDDBGHLT	(1     << 28)		/* Debug Halt */
-+#define		AT91_WDT_WDIDLEHLT	(1     << 29)		/* Idle Halt */
-+
-+#define AT91_WDT_SR		0x08			/* Watchdog Status Register */
-+#define		AT91_WDT_WDUNF		(1 << 0)		/* Watchdog Underflow */
-+#define		AT91_WDT_WDERR		(1 << 1)		/* Watchdog Error */
-+
-+
-+#endif
--- 
-1.8.1.4
-

board/telit/evk-pro3/barebox-2013.04.0-0003-at91sam9260-9g20-add-wathdog-support.patch

@@ -1,40 +0,0 @@
-From 3338bcb05479f1149420d4a0ea3904cb9e42eef5 Mon Sep 17 00:00:00 2001
-From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-Date: Wed, 14 Nov 2012 19:18:22 +0800
-Subject: [PATCH 3/5] at91sam9260/9g20: add wathdog support
-
-Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
----
- arch/arm/mach-at91/at91sam9260_devices.c | 12 ++++++++++++
- 1 file changed, 12 insertions(+)
-
-diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
-index 1c375ee..5885f91 100644
---- a/arch/arm/mach-at91/at91sam9260_devices.c
-+++ b/arch/arm/mach-at91/at91sam9260_devices.c
-@@ -10,6 +10,7 @@
-  *
-  */
- #include <common.h>
-+#include <init.h>
- #include <sizes.h>
- #include <asm/armlinux.h>
- #include <asm/hardware.h>
-@@ -397,3 +398,14 @@ void at91_add_device_mci(short mmc_id, struct atmel_mci_platform_data *data)
- #else
- void at91_add_device_mci(short mmc_id, struct atmel_mci_platform_data *data) {}
- #endif
-+
-+#ifdef CONFIG_WATCHDOG_AT91SAM9X
-+static int at91_add_device_watchdog(void)
-+{
-+	add_generic_device("at91sam9_wdt", DEVICE_ID_SINGLE, NULL,
-+		AT91_WDT + AT91_BASE_SYS, 16, IORESOURCE_MEM, NULL);
-+
-+	return 0;
-+}
-+coredevice_initcall(at91_add_device_watchdog);
-+#endif
--- 
-1.8.1.4
-

board/telit/evk-pro3/barebox-2013.04.0-0004-at91sam9260-9g20-fix-wathdog-support.patch

@@ -1,26 +0,0 @@
-From e03bf0e3ad24898019b89eb9a6935d159c60268f Mon Sep 17 00:00:00 2001
-From: Fabio Porcedda <fabio.porcedda@gmail.com>
-Date: Thu, 17 Jan 2013 11:32:35 +0100
-Subject: [PATCH 4/5] at91sam9260/9g20: fix wathdog support
-
-Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
----
- arch/arm/mach-at91/at91sam9260_devices.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
-index 5885f91..df675d2 100644
---- a/arch/arm/mach-at91/at91sam9260_devices.c
-+++ b/arch/arm/mach-at91/at91sam9260_devices.c
-@@ -403,7 +403,7 @@ void at91_add_device_mci(short mmc_id, struct atmel_mci_platform_data *data) {}
- static int at91_add_device_watchdog(void)
- {
- 	add_generic_device("at91sam9_wdt", DEVICE_ID_SINGLE, NULL,
--		AT91_WDT + AT91_BASE_SYS, 16, IORESOURCE_MEM, NULL);
-+		AT91_BASE_WDT, 16, IORESOURCE_MEM, NULL);
- 
- 	return 0;
- }
--- 
-1.8.1.4
-

board/telit/evk-pro3/barebox-2013.04.0-0005-watchdog-enable-for-evk-pro3.patch

@@ -1,26 +0,0 @@
-From 98c96ea36a4b3bb9b92dde849db5e8d6918b5168 Mon Sep 17 00:00:00 2001
-From: Fabio Porcedda <fabio.porcedda@gmail.com>
-Date: Thu, 17 Jan 2013 11:32:59 +0100
-Subject: [PATCH 5/5] watchdog: enable for evk-pro3
-
-Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
----
- arch/arm/configs/telit_evk_pro3_defconfig | 2 ++
- 1 file changed, 2 insertions(+)
-
-diff --git a/arch/arm/configs/telit_evk_pro3_defconfig b/arch/arm/configs/telit_evk_pro3_defconfig
-index 050d176..436cecf 100644
---- a/arch/arm/configs/telit_evk_pro3_defconfig
-+++ b/arch/arm/configs/telit_evk_pro3_defconfig
-@@ -68,6 +68,8 @@ CONFIG_MCI_ATMEL=y
- CONFIG_LED=y
- CONFIG_LED_GPIO=y
- CONFIG_LED_TRIGGERS=y
-+CONFIG_WATCHDOG=y
-+CONFIG_WATCHDOG_AT91SAM9X=y
- CONFIG_FS_TFTP=y
- CONFIG_FS_FAT=y
- CONFIG_FS_FAT_LFN=y
--- 
-1.8.1.4
-

board/telit/evk-pro3/linux-3.9.config

@@ -1,201 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_KERNEL_LZO=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_LBDAF is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_SOC_AT91SAM9260=y
-CONFIG_SOC_AT91SAM9263=y
-CONFIG_SOC_AT91SAM9G45=y
-CONFIG_SOC_AT91SAM9X5=y
-CONFIG_SOC_AT91SAM9N12=y
-CONFIG_MACH_AT91SAM_DT=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_AT91_TIMER_HZ=128
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_UACCESS_WITH_MEMCPY=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
-CONFIG_KEXEC=y
-CONFIG_AUTO_ZRELADDR=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-CONFIG_IPV6=y
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-CONFIG_IPV6_SIT_6RD=y
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_GLUEBI=y
-CONFIG_PROC_DEVICETREE=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_ATMEL_PWM=y
-CONFIG_ATMEL_TCLIB=y
-CONFIG_EEPROM_93CX6=m
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_MII=y
-CONFIG_MACB=y
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_CHELSIO is not set
-# CONFIG_NET_VENDOR_FARADAY is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_NET_VENDOR_SEEQ is not set
-# CONFIG_NET_VENDOR_SMSC is not set
-# CONFIG_NET_VENDOR_STMICRO is not set
-CONFIG_DAVICOM_PHY=y
-CONFIG_MICREL_PHY=y
-# CONFIG_WLAN is not set
-CONFIG_INPUT_POLLDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=480
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=272
-CONFIG_INPUT_JOYDEV=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_SERIO is not set
-CONFIG_LEGACY_PTY_COUNT=4
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_GPIO=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-CONFIG_PINCTRL_AT91=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_AT91SAM9X_WATCHDOG=y
-CONFIG_SSB=m
-CONFIG_FB=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_ATMEL=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_ATMEL_LCDC=y
-# CONFIG_BACKLIGHT_GENERIC is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_ACORN_8x8=y
-CONFIG_FONT_MINI_4x6=y
-CONFIG_LOGO=y
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_ACM=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SERIAL=y
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_FTDI_SIO=y
-CONFIG_USB_SERIAL_PL2303=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_AT91=m
-CONFIG_USB_ATMEL_USBA=m
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_CDC_COMPOSITE=m
-CONFIG_USB_G_ACM_MS=m
-CONFIG_USB_G_MULTI=m
-CONFIG_USB_G_MULTI_CDC=y
-CONFIG_MMC=y
-CONFIG_MMC_ATMELMCI=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_DMADEVICES=y
-# CONFIG_IOMMU_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_FANOTIFY=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_UBIFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_DEBUG_FS=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_USER=y
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_USER_API_HASH=m
-CONFIG_CRYPTO_USER_API_SKCIPHER=m
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_CCITT=m
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC7=m
-CONFIG_AVERAGE=y

board/telit/evk-pro3/readme.txt

@@ -1,28 +0,0 @@
-Buildroot board support for Telit EVK-PRO3 with Telit GE863-PRO3
-
-Official site:
-  http://www.telit.com/en/products.php?p_id=3&p_ac=show&p=10
-
-Build images:
-    make telit_evk_pro3_defconfig
-    make
-
-  images built:
-  - output/images/barebox.bin
-  - output/images/zImage
-  - output/images/rootfs.ubi
-
-
-Flash built images:
-  The first time you need to bootstrap from Telit Official Release 221.07.1007,
-  at the U-Boot prompt type:
-    U-Boot> loadb
-  send buildroot/output/images/barebox.bin
-    U-Boot> go 0x20200000
-
-  flash updated images using barebox through tftp:
-    barebox:/ erase dev/self0; cp /mnt/tftp/barebox.bin /dev/self0
-    barebox:/ erase /dev/nand0.kernel.bb; cp /mnt/tftp/zImage /dev/nand0.kernel.bb
-    barebox:/ erase /dev/nand0.rootfs.bb; cp /mnt/tftp/rootfs.ubi /dev/nand0.rootfs.bb
-    barebox:/ erase dev/env0
-    barebox:/ reset

boot/Config.in

@@ -1,16 +0,0 @@
-menu "Bootloaders"
-
-source "boot/at91bootstrap/Config.in"
-source "boot/at91bootstrap3/Config.in"
-source "boot/at91dataflashboot/Config.in"
-source "boot/barebox/Config.in"
-source "boot/boot-wrapper-aarch64/Config.in"
-source "boot/grub/Config.in"
-source "boot/lpc32xxcdl/Config.in"
-source "boot/mxs-bootlets/Config.in"
-source "boot/syslinux/Config.in"
-source "boot/uboot/Config.in"
-source "boot/xloader/Config.in"
-
-endmenu
-

boot/at91bootstrap/Config.in

@@ -1,50 +0,0 @@
-config BR2_TARGET_AT91BOOTSTRAP
-	depends on BR2_arm926t
-	bool "AT91 Bootstrap"
-	help
-	  AT91Bootstrap is a first level bootloader for the Atmel AT91
-	  devices. It integrates algorithms for:
-	  - Device initialization such as clock configuration, PIO settings...
-	  - Peripheral drivers such as PIO, PMC or SDRAMC...
-	  - Physical media algorithm such as DataFlash, NandFlash, NOR Flash...
-
-if	BR2_TARGET_AT91BOOTSTRAP
-
-config BR2_TARGET_AT91BOOTSTRAP_CUSTOM_PATCH_DIR
-	string "custom patch dir"
-	help
-	  If your board requires custom patches, add the path to the
-	  directory containing the patches here. The patches must be
-	  named at91bootstrap-<version>-<something>.patch.
-
-	  Most users may leave this empty
-
-config BR2_TARGET_AT91BOOTSTRAP_BOARD
-	string "Bootstrap board"
-	default ""
-	help
-	  This is used to do a make <board>_config
-
-choice
-	prompt "Boot Memory"
-	default BR2_TARGET_AT91BOOTSTRAP_DATAFLASH
-	help
-	  Select Chip for which AT91 bootstrap should be built
-
-config BR2_TARGET_AT91BOOTSTRAP_DATAFLASH
-	bool "Data Flash"
-
-config BR2_TARGET_AT91BOOTSTRAP_NANDFLASH
-	bool "NAND Flash"
-
-endchoice
-
-config BR2_TARGET_AT91BOOTSTRAP_MEMORY
-	string
-	default	"dataflash"	if	BR2_TARGET_AT91BOOTSTRAP_DATAFLASH
-	default	"nandflash"	if	BR2_TARGET_AT91BOOTSTRAP_NANDFLASH
-
-endif
-
-
-

boot/at91bootstrap/at91bootstrap-1.16-eabi-fix.patch

@@ -1,334 +0,0 @@
-When using an EABI toolchain, the default compilation generates
-references to __aeabi_unwind_cpp_pr0(). This symbol is defined in
-libgcc, but we don't want to use it for a bootloader.
-
-Therefore, this patch passes some additional CFLAGS to disable the
-generation of such references by avoiding unwind tables, exceptions,
-etc.
-
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
----
- board/at91cap9adk/dataflash/Makefile      |    2 +-
- board/at91cap9adk/norflash/Makefile       |    2 +-
- board/at91cap9stk/nandflash/Makefile      |    2 +-
- board/at91sam9260ek/dataflash/Makefile    |    2 +-
- board/at91sam9260ek/nandflash/Makefile    |    2 +-
- board/at91sam9261ek/dataflash/Makefile    |    2 +-
- board/at91sam9261ek/nandflash/Makefile    |    2 +-
- board/at91sam9263ek/dataflash/Makefile    |    2 +-
- board/at91sam9263ek/nandflash/Makefile    |    2 +-
- board/at91sam9g10ek/dataflash/Makefile    |    2 +-
- board/at91sam9g10ek/nandflash/Makefile    |    2 +-
- board/at91sam9g20ek/dataflash/Makefile    |    2 +-
- board/at91sam9g20ek/nandflash/Makefile    |    2 +-
- board/at91sam9g45ekes/nandflash/Makefile  |    2 +-
- board/at91sam9m10ekes/dataflash/Makefile  |    2 +-
- board/at91sam9m10ekes/nandflash/Makefile  |    2 +-
- board/at91sam9m10g45ek/dataflash/Makefile |    2 +-
- board/at91sam9m10g45ek/nandflash/Makefile |    2 +-
- board/at91sam9rlek/dataflash/Makefile     |    2 +-
- board/at91sam9rlek/nandflash/Makefile     |    2 +-
- board/at91sam9xeek/dataflash/Makefile     |    2 +-
- board/at91sam9xeek/nandflash/Makefile     |    2 +-
- lib/Makefile                              |    2 +-
- 23 files changed, 23 insertions(+), 23 deletions(-)
-
-Index: Bootstrap-v1.16/board/at91cap9adk/dataflash/Makefile
-===================================================================
---- Bootstrap-v1.16.orig/board/at91cap9adk/dataflash/Makefile
-+++ Bootstrap-v1.16/board/at91cap9adk/dataflash/Makefile
-@@ -34,7 +34,7 @@
- SIZE=$(CROSS_COMPILE)size
- OBJCOPY=$(CROSS_COMPILE)objcopy
- OBJDUMP=$(CROSS_COMPILE)objdump
--CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL)
-+CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
- ASFLAGS=-g -mcpu=arm9 -c -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
- 
- # Linker flags.
-Index: Bootstrap-v1.16/board/at91cap9adk/norflash/Makefile
-===================================================================
---- Bootstrap-v1.16.orig/board/at91cap9adk/norflash/Makefile
-+++ Bootstrap-v1.16/board/at91cap9adk/norflash/Makefile
-@@ -34,7 +34,7 @@
- SIZE=$(CROSS_COMPILE)size
- OBJCOPY=$(CROSS_COMPILE)objcopy
- OBJDUMP=$(CROSS_COMPILE)objdump
--CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL)
-+CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
- ASFLAGS=-g -mcpu=arm9 -c -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
- 
- # Linker flags.
-Index: Bootstrap-v1.16/board/at91cap9stk/nandflash/Makefile
-===================================================================
---- Bootstrap-v1.16.orig/board/at91cap9stk/nandflash/Makefile
-+++ Bootstrap-v1.16/board/at91cap9stk/nandflash/Makefile
-@@ -37,7 +37,7 @@
- SIZE=$(CROSS_COMPILE)size
- OBJCOPY=$(CROSS_COMPILE)objcopy
- OBJDUMP=$(CROSS_COMPILE)objdump
--CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL)
-+CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
- ASFLAGS=-g -mcpu=arm9 -c -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
- 
- 
-Index: Bootstrap-v1.16/board/at91sam9260ek/dataflash/Makefile
-===================================================================
---- Bootstrap-v1.16.orig/board/at91sam9260ek/dataflash/Makefile
-+++ Bootstrap-v1.16/board/at91sam9260ek/dataflash/Makefile
-@@ -37,7 +37,7 @@
- SIZE=$(CROSS_COMPILE)size
- OBJCOPY=$(CROSS_COMPILE)objcopy
- OBJDUMP=$(CROSS_COMPILE)objdump
--CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -I$(INCL)
-+CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
- ASFLAGS=-g -mcpu=arm926ej-s -c -Os -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
- 
- # Linker flags.
-Index: Bootstrap-v1.16/board/at91sam9260ek/nandflash/Makefile
-===================================================================
---- Bootstrap-v1.16.orig/board/at91sam9260ek/nandflash/Makefile
-+++ Bootstrap-v1.16/board/at91sam9260ek/nandflash/Makefile
-@@ -37,7 +37,7 @@
- SIZE=$(CROSS_COMPILE)size
- OBJCOPY=$(CROSS_COMPILE)objcopy
- OBJDUMP=$(CROSS_COMPILE)objdump
--CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -I$(INCL)
-+CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
- ASFLAGS=-g -mcpu=arm926ej-s -c -Os -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
- 
- # Linker flags.
-Index: Bootstrap-v1.16/board/at91sam9261ek/dataflash/Makefile
-===================================================================
---- Bootstrap-v1.16.orig/board/at91sam9261ek/dataflash/Makefile
-+++ Bootstrap-v1.16/board/at91sam9261ek/dataflash/Makefile
-@@ -37,7 +37,7 @@
- SIZE=$(CROSS_COMPILE)size
- OBJCOPY=$(CROSS_COMPILE)objcopy
- OBJDUMP=$(CROSS_COMPILE)objdump
--CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -I$(INCL)
-+CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
- ASFLAGS=-g -mcpu=arm9 -c -Os -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
- 
- # Linker flags.
-Index: Bootstrap-v1.16/board/at91sam9261ek/nandflash/Makefile
-===================================================================
---- Bootstrap-v1.16.orig/board/at91sam9261ek/nandflash/Makefile
-+++ Bootstrap-v1.16/board/at91sam9261ek/nandflash/Makefile
-@@ -37,7 +37,7 @@
- SIZE=$(CROSS_COMPILE)size
- OBJCOPY=$(CROSS_COMPILE)objcopy
- OBJDUMP=$(CROSS_COMPILE)objdump
--CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -I$(INCL)
-+CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
- ASFLAGS=-g -mcpu=arm9 -c -Os -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
- 
- # Linker flags.
-Index: Bootstrap-v1.16/board/at91sam9263ek/dataflash/Makefile
-===================================================================
---- Bootstrap-v1.16.orig/board/at91sam9263ek/dataflash/Makefile
-+++ Bootstrap-v1.16/board/at91sam9263ek/dataflash/Makefile
-@@ -34,7 +34,7 @@
- SIZE=$(CROSS_COMPILE)size
- OBJCOPY=$(CROSS_COMPILE)objcopy
- OBJDUMP=$(CROSS_COMPILE)objdump
--CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -I$(INCL)
-+CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
- ASFLAGS=-g -mcpu=arm9 -c -Os -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
- 
- # Linker flags.
-Index: Bootstrap-v1.16/board/at91sam9263ek/nandflash/Makefile
-===================================================================
---- Bootstrap-v1.16.orig/board/at91sam9263ek/nandflash/Makefile
-+++ Bootstrap-v1.16/board/at91sam9263ek/nandflash/Makefile
-@@ -33,7 +33,7 @@
- SIZE=$(CROSS_COMPILE)size
- OBJCOPY=$(CROSS_COMPILE)objcopy
- OBJDUMP=$(CROSS_COMPILE)objdump
--CCFLAGS=-g -mcpu=arm9 -O0 -Wall -D$(TARGET) -I$(INCL)
-+CCFLAGS=-g -mcpu=arm9 -O0 -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
- ASFLAGS=-g -mcpu=arm9 -c -Os -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
- 
- # Linker flags.
-Index: Bootstrap-v1.16/board/at91sam9g10ek/dataflash/Makefile
-===================================================================
---- Bootstrap-v1.16.orig/board/at91sam9g10ek/dataflash/Makefile
-+++ Bootstrap-v1.16/board/at91sam9g10ek/dataflash/Makefile
-@@ -37,7 +37,7 @@
- SIZE=$(CROSS_COMPILE)size
- OBJCOPY=$(CROSS_COMPILE)objcopy
- OBJDUMP=$(CROSS_COMPILE)objdump
--CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -I$(INCL)
-+CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
- ASFLAGS=-g -mcpu=arm9 -c -Os -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
- 
- # Linker flags.
-Index: Bootstrap-v1.16/board/at91sam9g10ek/nandflash/Makefile
-===================================================================
---- Bootstrap-v1.16.orig/board/at91sam9g10ek/nandflash/Makefile
-+++ Bootstrap-v1.16/board/at91sam9g10ek/nandflash/Makefile
-@@ -37,7 +37,7 @@
- SIZE=$(CROSS_COMPILE)size
- OBJCOPY=$(CROSS_COMPILE)objcopy
- OBJDUMP=$(CROSS_COMPILE)objdump
--CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -I$(INCL)
-+CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
- ASFLAGS=-g -mcpu=arm9 -c -Os -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
- 
- # Linker flags.
-Index: Bootstrap-v1.16/board/at91sam9g20ek/dataflash/Makefile
-===================================================================
---- Bootstrap-v1.16.orig/board/at91sam9g20ek/dataflash/Makefile
-+++ Bootstrap-v1.16/board/at91sam9g20ek/dataflash/Makefile
-@@ -37,7 +37,7 @@
- SIZE=$(CROSS_COMPILE)size
- OBJCOPY=$(CROSS_COMPILE)objcopy
- OBJDUMP=$(CROSS_COMPILE)objdump
--CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -I$(INCL)
-+CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
- ASFLAGS=-g -mcpu=arm926ej-s -c -Os -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
- 
- # Linker flags.
-Index: Bootstrap-v1.16/board/at91sam9g20ek/nandflash/Makefile
-===================================================================
---- Bootstrap-v1.16.orig/board/at91sam9g20ek/nandflash/Makefile
-+++ Bootstrap-v1.16/board/at91sam9g20ek/nandflash/Makefile
-@@ -37,7 +37,7 @@
- SIZE=$(CROSS_COMPILE)size
- OBJCOPY=$(CROSS_COMPILE)objcopy
- OBJDUMP=$(CROSS_COMPILE)objdump
--CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -I$(INCL)
-+CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
- ASFLAGS=-g -mcpu=arm926ej-s -c -Os -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
- 
- # Linker flags.
-Index: Bootstrap-v1.16/board/at91sam9g45ekes/nandflash/Makefile
-===================================================================
---- Bootstrap-v1.16.orig/board/at91sam9g45ekes/nandflash/Makefile
-+++ Bootstrap-v1.16/board/at91sam9g45ekes/nandflash/Makefile
-@@ -37,7 +37,7 @@
- SIZE=$(CROSS_COMPILE)size
- OBJCOPY=$(CROSS_COMPILE)objcopy
- OBJDUMP=$(CROSS_COMPILE)objdump
--CCFLAGS=-g -mcpu=arm926ej-s -O2 -Wall -D$(TARGET) -I$(INCL)
-+CCFLAGS=-g -mcpu=arm926ej-s -O2 -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
- ASFLAGS=-g -mcpu=arm926ej-s -c -O2 -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
- 
- # Linker flags.
-Index: Bootstrap-v1.16/board/at91sam9m10ekes/dataflash/Makefile
-===================================================================
---- Bootstrap-v1.16.orig/board/at91sam9m10ekes/dataflash/Makefile
-+++ Bootstrap-v1.16/board/at91sam9m10ekes/dataflash/Makefile
-@@ -37,7 +37,7 @@
- SIZE=$(CROSS_COMPILE)size
- OBJCOPY=$(CROSS_COMPILE)objcopy
- OBJDUMP=$(CROSS_COMPILE)objdump
--CCFLAGS=-g -mcpu=arm926ej-s -O2 -Wall -D$(TARGET) -I$(INCL)
-+CCFLAGS=-g -mcpu=arm926ej-s -O2 -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
- ASFLAGS=-g -mcpu=arm926ej-s -c -O2 -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
- 
- # Linker flags.
-Index: Bootstrap-v1.16/board/at91sam9m10ekes/nandflash/Makefile
-===================================================================
---- Bootstrap-v1.16.orig/board/at91sam9m10ekes/nandflash/Makefile
-+++ Bootstrap-v1.16/board/at91sam9m10ekes/nandflash/Makefile
-@@ -37,7 +37,7 @@
- SIZE=$(CROSS_COMPILE)size
- OBJCOPY=$(CROSS_COMPILE)objcopy
- OBJDUMP=$(CROSS_COMPILE)objdump
--CCFLAGS=-g -mcpu=arm926ej-s -O2 -Wall -D$(TARGET) -I$(INCL)
-+CCFLAGS=-g -mcpu=arm926ej-s -O2 -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
- ASFLAGS=-g -mcpu=arm926ej-s -c -O2 -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
- 
- # Linker flags.
-Index: Bootstrap-v1.16/board/at91sam9m10g45ek/dataflash/Makefile
-===================================================================
---- Bootstrap-v1.16.orig/board/at91sam9m10g45ek/dataflash/Makefile
-+++ Bootstrap-v1.16/board/at91sam9m10g45ek/dataflash/Makefile
-@@ -37,7 +37,7 @@
- SIZE=$(CROSS_COMPILE)size
- OBJCOPY=$(CROSS_COMPILE)objcopy
- OBJDUMP=$(CROSS_COMPILE)objdump
--CCFLAGS=-g -mcpu=arm926ej-s -O2 -Wall -D$(TARGET) -I$(INCL)
-+CCFLAGS=-g -mcpu=arm926ej-s -O2 -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
- ASFLAGS=-g -mcpu=arm926ej-s -c -O2 -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
- 
- # Linker flags.
-Index: Bootstrap-v1.16/board/at91sam9m10g45ek/nandflash/Makefile
-===================================================================
---- Bootstrap-v1.16.orig/board/at91sam9m10g45ek/nandflash/Makefile
-+++ Bootstrap-v1.16/board/at91sam9m10g45ek/nandflash/Makefile
-@@ -37,7 +37,7 @@
- SIZE=$(CROSS_COMPILE)size
- OBJCOPY=$(CROSS_COMPILE)objcopy
- OBJDUMP=$(CROSS_COMPILE)objdump
--CCFLAGS=-g -mcpu=arm926ej-s -O2 -Wall -D$(TARGET) -I$(INCL)
-+CCFLAGS=-g -mcpu=arm926ej-s -O2 -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
- ASFLAGS=-g -mcpu=arm926ej-s -c -O2 -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
- 
- # Linker flags.
-Index: Bootstrap-v1.16/board/at91sam9rlek/dataflash/Makefile
-===================================================================
---- Bootstrap-v1.16.orig/board/at91sam9rlek/dataflash/Makefile
-+++ Bootstrap-v1.16/board/at91sam9rlek/dataflash/Makefile
-@@ -37,7 +37,7 @@
- SIZE=$(CROSS_COMPILE)size
- OBJCOPY=$(CROSS_COMPILE)objcopy
- OBJDUMP=$(CROSS_COMPILE)objdump
--CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -I$(INCL)
-+CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
- ASFLAGS=-g -mcpu=arm926ej-s -c -Os -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
- 
- # Linker flags.
-Index: Bootstrap-v1.16/board/at91sam9rlek/nandflash/Makefile
-===================================================================
---- Bootstrap-v1.16.orig/board/at91sam9rlek/nandflash/Makefile
-+++ Bootstrap-v1.16/board/at91sam9rlek/nandflash/Makefile
-@@ -37,7 +37,7 @@
- SIZE=$(CROSS_COMPILE)size
- OBJCOPY=$(CROSS_COMPILE)objcopy
- OBJDUMP=$(CROSS_COMPILE)objdump
--CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -I$(INCL)
-+CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
- ASFLAGS=-g -mcpu=arm926ej-s -c -Os -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
- 
- # Linker flags.
-Index: Bootstrap-v1.16/board/at91sam9xeek/dataflash/Makefile
-===================================================================
---- Bootstrap-v1.16.orig/board/at91sam9xeek/dataflash/Makefile
-+++ Bootstrap-v1.16/board/at91sam9xeek/dataflash/Makefile
-@@ -38,7 +38,7 @@
- SIZE=$(CROSS_COMPILE)size
- OBJCOPY=$(CROSS_COMPILE)objcopy
- OBJDUMP=$(CROSS_COMPILE)objdump
--CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -I$(INCL)
-+CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
- ASFLAGS=-g -mcpu=arm9 -c -Os -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
- 
- # Linker flags.
-Index: Bootstrap-v1.16/board/at91sam9xeek/nandflash/Makefile
-===================================================================
---- Bootstrap-v1.16.orig/board/at91sam9xeek/nandflash/Makefile
-+++ Bootstrap-v1.16/board/at91sam9xeek/nandflash/Makefile
-@@ -38,7 +38,7 @@
- SIZE=$(CROSS_COMPILE)size
- OBJCOPY=$(CROSS_COMPILE)objcopy
- OBJDUMP=$(CROSS_COMPILE)objdump
--CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -I$(INCL)
-+CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
- ASFLAGS=-g -mcpu=arm9 -c -Os -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
- 
- # Linker flags.
-Index: Bootstrap-v1.16/lib/Makefile
-===================================================================
---- Bootstrap-v1.16.orig/lib/Makefile
-+++ Bootstrap-v1.16/lib/Makefile
-@@ -37,7 +37,7 @@
- SIZE=$(CROSS_COMPILE)size
- OBJCOPY=$(CROSS_COMPILE)objcopy
- OBJDUMP=$(CROSS_COMPILE)objdump
--CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -I$(INCL)
-+CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
- ASFLAGS=-g -mcpu=arm926ej-s -c -Os -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
- 
- # Linker flags.

boot/at91bootstrap/at91bootstrap-1.16-gcc-4.6.x-ldscript-fix.patch

@@ -1,29 +0,0 @@
-From b783d1f9bf985c0981e755bd2c13e091e9d6837f Mon Sep 17 00:00:00 2001
-From: Gregory Hermant <gregory.hermant@calao-systems.com>
-Date: Tue, 6 Nov 2012 09:38:50 +0100
-Subject: [PATCH] at91bootstrap: fix overlap linker issue
-
-The linker script of the at91bootstrap package has to be modified when
-built from gcc-4.6.x version. Indeed a section named text.startup is
-created and has to be added into the text section.
-
-Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
----
- elf32-littlearm.lds |    1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/elf32-littlearm.lds b/elf32-littlearm.lds
-index a33952f..4f3ba25 100644
---- a/elf32-littlearm.lds
-+++ b/elf32-littlearm.lds
-@@ -7,6 +7,7 @@ SECTIONS
- 	.text : { 
- 		_stext = .;
- 		*(.text)
-+		*(.text*)
- 		*(.rodata)                 /* read-only data (constants) */
- 		*(.rodata*)
- 		. = ALIGN(4);
--- 
-1.7.9.5
-

boot/at91bootstrap/at91bootstrap-1.16-u-boot-relocation-fix.patch

@@ -1,284 +0,0 @@
-From d4e4a1aad559e35d84b445d1379be94ad036984e Mon Sep 17 00:00:00 2001
-From: Alexandre Belloni <alexandre.belloni@piout.net>
-Date: Thu, 25 Oct 2012 22:57:14 +0200
-Subject: [PATCH] u-boot relocation fix
-
-Every AT91SAM plaforms were broken between 2010.12 and 2011.03 because
-of the relocation changes.
-
-We have to get JUMP_ADDR consistant with what is used by u-boot
-(CONFIG_SYS_TEXT_BASE).
-
-I didn't know what to do with at91sam9m10g45ek as it doesn't seems to be
-converted yet. But anyway, that means that it is either not working or
-doesn't care so changing it here shouldn't harm.
-
-We also have to increase the IMG_SIZE as u-boot as grown larger than the
-default value. As requested on the u-boot ML, we assume that it could
-be up to 495kB big.
-
-It means that now, you have to flash your kernel at 0x00084000 instead
-of 0x00042000. And so you also have to load it from that adress from
-u-boot.
-
-Then, remember that you could decrease IMG_SIZE to boot faster.
-
-Signed-off-by: Alexandre Belloni <alexandre.belloni@piout.net>
----
- board/at91sam9260ek/dataflash/at91sam9260ek.h      |    4 ++--
- board/at91sam9260ek/nandflash/at91sam9260ek.h      |    2 +-
- board/at91sam9261ek/dataflash/at91sam9261ek.h      |    4 ++--
- board/at91sam9261ek/nandflash/at91sam9261ek.h      |    2 +-
- board/at91sam9263ek/dataflash/at91sam9263ek.h      |    4 ++--
- board/at91sam9263ek/nandflash/at91sam9263ek.h      |    2 +-
- board/at91sam9g10ek/dataflash/at91sam9g10ek.h      |    4 ++--
- board/at91sam9g10ek/nandflash/at91sam9g10ek.h      |    2 +-
- board/at91sam9g20ek/dataflash/at91sam9g20ek.h      |    4 ++--
- board/at91sam9g20ek/nandflash/at91sam9g20ek.h      |    2 +-
- board/at91sam9m10ekes/dataflash/at91sam9m10ekes.h  |    2 +-
- .../at91sam9m10g45ek/dataflash/at91sam9m10g45ek.h  |    2 +-
- board/at91sam9rlek/dataflash/at91sam9rlek.h        |    4 ++--
- board/at91sam9rlek/nandflash/at91sam9rlek.h        |    2 +-
- board/at91sam9xeek/dataflash/at91sam9xeek.h        |    4 ++--
- board/at91sam9xeek/nandflash/at91sam9xeek.h        |    2 +-
- 16 files changed, 23 insertions(+), 23 deletions(-)
-
-diff --git a/board/at91sam9260ek/dataflash/at91sam9260ek.h b/board/at91sam9260ek/dataflash/at91sam9260ek.h
-index 1834246..91081a1 100644
---- a/board/at91sam9260ek/dataflash/at91sam9260ek.h
-+++ b/board/at91sam9260ek/dataflash/at91sam9260ek.h
-@@ -74,10 +74,10 @@
- #define AT91C_SPI_PCS_DATAFLASH		AT91C_SPI_PCS1_DATAFLASH	/* Boot on SPI NCS0 */
- 
- #define IMG_ADDRESS 		0x8400			/* Image Address in DataFlash */
--#define	IMG_SIZE		0x33900			/* Image Size in DataFlash    */
-+#define	IMG_SIZE		0x7BC00			/* Image Size in DataFlash    */
- 
- #define MACH_TYPE       0x44B       /* AT91SAM9260-EK */
--#define JUMP_ADDR		0x23F00000		/* Final Jump Address 	      */
-+#define JUMP_ADDR		0x21F00000		/* Final Jump Address 	      */
- 
- /* ******************************************************************* */
- /* Application Settings                                                */
-diff --git a/board/at91sam9260ek/nandflash/at91sam9260ek.h b/board/at91sam9260ek/nandflash/at91sam9260ek.h
-index 2cac601..f8fdff2 100644
---- a/board/at91sam9260ek/nandflash/at91sam9260ek.h
-+++ b/board/at91sam9260ek/nandflash/at91sam9260ek.h
-@@ -92,7 +92,7 @@
- #define	IMG_SIZE		0x40000		/* Image Size in NandFlash    */
- 
- #define MACH_TYPE       	0x44B		/* AT91SAM9260-EK */
--#define JUMP_ADDR		0x23F00000	/* Final Jump Address 	      */
-+#define JUMP_ADDR		0x21F00000	/* Final Jump Address 	      */
- 
- /* ******************************************************************* */
- /* Application Settings                                                */
-diff --git a/board/at91sam9261ek/dataflash/at91sam9261ek.h b/board/at91sam9261ek/dataflash/at91sam9261ek.h
-index 8ce30e9..276ba3d 100644
---- a/board/at91sam9261ek/dataflash/at91sam9261ek.h
-+++ b/board/at91sam9261ek/dataflash/at91sam9261ek.h
-@@ -97,10 +97,10 @@
- #define AT91C_SPI_PCS_DATAFLASH		AT91C_SPI_PCS0_DATAFLASH	/* Boot on SPI NCS0 */
- 
- #define IMG_ADDRESS 		0x8400			/* Image Address in DataFlash */
--#define	IMG_SIZE		0x33900			/* Image Size in DataFlash    */
-+#define	IMG_SIZE		0x7BC00			/* Image Size in DataFlash    */
- 
- #define MACH_TYPE       0x350       /* AT91SAM9261-EK */
--#define JUMP_ADDR		0x23F00000		/* Final Jump Address 	      */
-+#define JUMP_ADDR		0x21F00000		/* Final Jump Address 	      */
- 
- /* ******************************************************************* */
- /* Application Settings                                                */
-diff --git a/board/at91sam9261ek/nandflash/at91sam9261ek.h b/board/at91sam9261ek/nandflash/at91sam9261ek.h
-index badc3ac..e628c97 100644
---- a/board/at91sam9261ek/nandflash/at91sam9261ek.h
-+++ b/board/at91sam9261ek/nandflash/at91sam9261ek.h
-@@ -114,7 +114,7 @@
- #define	IMG_SIZE		0x40000		/* Image Size in NandFlash    */
- 
- #define MACH_TYPE       	0x350		/* AT91SAM9261-EK */
--#define JUMP_ADDR		0x23F00000	/* Final Jump Address 	      */
-+#define JUMP_ADDR		0x21F00000	/* Final Jump Address 	      */
- 
- /* ******************************************************************* */
- /* Application Settings                                                */
-diff --git a/board/at91sam9263ek/dataflash/at91sam9263ek.h b/board/at91sam9263ek/dataflash/at91sam9263ek.h
-index 5c9da4b..870f9e2 100644
---- a/board/at91sam9263ek/dataflash/at91sam9263ek.h
-+++ b/board/at91sam9263ek/dataflash/at91sam9263ek.h
-@@ -96,10 +96,10 @@
- #define AT91C_SPI_PCS_DATAFLASH		AT91C_SPI_PCS0_DATAFLASH	/* Boot on SPI NCS0 */
- 
- #define IMG_ADDRESS 			0x8400			/* Image Address in DataFlash */
--#define	IMG_SIZE			0x33900			/* Image Size in DataFlash    */
-+#define	IMG_SIZE			0x7BC00			/* Image Size in DataFlash    */
- 
- #define MACH_TYPE       		0x4B2       		/* AT91SAM9263-EK */
--#define JUMP_ADDR			0x23F00000		/* Final Jump Address 	      */
-+#define JUMP_ADDR			0x21F00000		/* Final Jump Address 	      */
- 
- /* ******************************************************************* */
- /* Application Settings                                                */
-diff --git a/board/at91sam9263ek/nandflash/at91sam9263ek.h b/board/at91sam9263ek/nandflash/at91sam9263ek.h
-index 505afc7..8ab4f46 100644
---- a/board/at91sam9263ek/nandflash/at91sam9263ek.h
-+++ b/board/at91sam9263ek/nandflash/at91sam9263ek.h
-@@ -108,7 +108,7 @@
- #define	IMG_SIZE	0x40000		/* Image Size in NandFlash    */
- 
- #define MACH_TYPE       1202       	/* AT91SAM9263-EK */
--#define JUMP_ADDR	0x23F00000	/* Final Jump Address 	      */
-+#define JUMP_ADDR	0x21F00000	/* Final Jump Address 	      */
- 
- /* ******************************************************************* */
- /* Application Settings                                                */
-diff --git a/board/at91sam9g10ek/dataflash/at91sam9g10ek.h b/board/at91sam9g10ek/dataflash/at91sam9g10ek.h
-index b2faf44..f4f556b 100644
---- a/board/at91sam9g10ek/dataflash/at91sam9g10ek.h
-+++ b/board/at91sam9g10ek/dataflash/at91sam9g10ek.h
-@@ -98,10 +98,10 @@
- #define AT91C_SPI_PCS_DATAFLASH		AT91C_SPI_PCS0_DATAFLASH	/* Boot on SPI NCS0 */
- 
- #define IMG_ADDRESS 		0x8400			/* Image Address in DataFlash */
--#define	IMG_SIZE		0x33900			/* Image Size in DataFlash    */
-+#define	IMG_SIZE		0x7BC00			/* Image Size in DataFlash    */
- 
- #define MACH_TYPE       0x350       /* AT91SAM9261-EK */
--#define JUMP_ADDR		0x23F00000		/* Final Jump Address 	      */
-+#define JUMP_ADDR		0x21F00000		/* Final Jump Address 	      */
- 
- /* ******************************************************************* */
- /* Application Settings                                                */
-diff --git a/board/at91sam9g10ek/nandflash/at91sam9g10ek.h b/board/at91sam9g10ek/nandflash/at91sam9g10ek.h
-index 66c40a3..6c3ecda 100644
---- a/board/at91sam9g10ek/nandflash/at91sam9g10ek.h
-+++ b/board/at91sam9g10ek/nandflash/at91sam9g10ek.h
-@@ -115,7 +115,7 @@
- #define	IMG_SIZE		0x40000		/* Image Size in NandFlash    */
- 
- #define MACH_TYPE       	0x350		/* AT91SAM9G10-EK */
--#define JUMP_ADDR		0x23F00000	/* Final Jump Address 	      */
-+#define JUMP_ADDR		0x21F00000	/* Final Jump Address 	      */
- 
- /* ******************************************************************* */
- /* Application Settings                                                */
-diff --git a/board/at91sam9g20ek/dataflash/at91sam9g20ek.h b/board/at91sam9g20ek/dataflash/at91sam9g20ek.h
-index eea0439..7fc70d6 100644
---- a/board/at91sam9g20ek/dataflash/at91sam9g20ek.h
-+++ b/board/at91sam9g20ek/dataflash/at91sam9g20ek.h
-@@ -75,10 +75,10 @@
- #define AT91C_SPI_PCS_DATAFLASH		AT91C_SPI_PCS1_DATAFLASH	/* Boot on SPI NCS1 */
- 
- #define IMG_ADDRESS 		0x8400			/* Image Address in DataFlash */
--#define	IMG_SIZE		0x33900			/* Image Size in DataFlash */
-+#define	IMG_SIZE		0x7BC00			/* Image Size in DataFlash */
- 
- #define MACH_TYPE		0x658			/* AT91SAM9G20-EK */
--#define JUMP_ADDR		0x23F00000		/* Final Jump Address */
-+#define JUMP_ADDR		0x21F00000		/* Final Jump Address */
- 
- /* ******************************************************************* */
- /* Application Settings                                                */
-diff --git a/board/at91sam9g20ek/nandflash/at91sam9g20ek.h b/board/at91sam9g20ek/nandflash/at91sam9g20ek.h
-index 31bd499..e797e4d 100644
---- a/board/at91sam9g20ek/nandflash/at91sam9g20ek.h
-+++ b/board/at91sam9g20ek/nandflash/at91sam9g20ek.h
-@@ -93,7 +93,7 @@
- #define	IMG_SIZE		0x40000			/* Image Size in NandFlash */
- 
- #define MACH_TYPE		0x658			/* AT91SAM9G20-EK */
--#define JUMP_ADDR		0x23F00000		/* Final Jump Address */
-+#define JUMP_ADDR		0x21F00000		/* Final Jump Address */
- 
- /* ******************************************************************* */
- /* Application Settings                                                */
-diff --git a/board/at91sam9m10ekes/dataflash/at91sam9m10ekes.h b/board/at91sam9m10ekes/dataflash/at91sam9m10ekes.h
-index a60fd41..5587a00 100644
---- a/board/at91sam9m10ekes/dataflash/at91sam9m10ekes.h
-+++ b/board/at91sam9m10ekes/dataflash/at91sam9m10ekes.h
-@@ -89,7 +89,7 @@
- #define AT91C_SPI_PCS_DATAFLASH		AT91C_SPI_PCS0_DATAFLASH	/* Boot on SPI NCS0 */
- 
- #define IMG_ADDRESS 		0x8400			/* Image Address in DataFlash */
--#define	IMG_SIZE		0x33900			/* Image Size in DataFlash */
-+#define	IMG_SIZE		0x7BC00			/* Image Size in DataFlash */
- 
- #define MACH_TYPE		0x9CD			/* AT91SAM9M10-EKES */
- #define JUMP_ADDR		0x73F00000		/* Final Jump Address */
-diff --git a/board/at91sam9m10g45ek/dataflash/at91sam9m10g45ek.h b/board/at91sam9m10g45ek/dataflash/at91sam9m10g45ek.h
-index 5c726b5..9090097 100644
---- a/board/at91sam9m10g45ek/dataflash/at91sam9m10g45ek.h
-+++ b/board/at91sam9m10g45ek/dataflash/at91sam9m10g45ek.h
-@@ -85,7 +85,7 @@
- #define AT91C_SPI_PCS_DATAFLASH		AT91C_SPI_PCS0_DATAFLASH	/* Boot on SPI NCS0 */
- 
- #define IMG_ADDRESS 		0x8400			/* Image Address in DataFlash */
--#define	IMG_SIZE		0x33900			/* Image Size in DataFlash */
-+#define	IMG_SIZE		0x7BC00			/* Image Size in DataFlash */
- 
- #define MACH_TYPE		0x726			/* AT91SAM9M10G45-EK */
- #define JUMP_ADDR		0x73F00000		/* Final Jump Address */
-diff --git a/board/at91sam9rlek/dataflash/at91sam9rlek.h b/board/at91sam9rlek/dataflash/at91sam9rlek.h
-index 05c42dc..150f17e 100644
---- a/board/at91sam9rlek/dataflash/at91sam9rlek.h
-+++ b/board/at91sam9rlek/dataflash/at91sam9rlek.h
-@@ -89,10 +89,10 @@
- #define AT91C_SPI_PCS_DATAFLASH		AT91C_SPI_PCS0_DATAFLASH	/* Boot on SPI NCS0 */
- 
- #define IMG_ADDRESS 	0x8400		/* Image Address in DataFlash */
--#define	IMG_SIZE	0x33900		/* Image Size in DataFlash    */
-+#define	IMG_SIZE	0x7BC00		/* Image Size in DataFlash    */
- 
- #define MACH_TYPE       1326       	/* AT91SAM9RL-EK */
--#define JUMP_ADDR	0x23F00000	/* Final Jump Address 	      */
-+#define JUMP_ADDR	0x21F00000	/* Final Jump Address 	      */
- 
- /* ******************************************************************* */
- /* Application Settings                                                */
-diff --git a/board/at91sam9rlek/nandflash/at91sam9rlek.h b/board/at91sam9rlek/nandflash/at91sam9rlek.h
-index 656b4ba..594db8f 100644
---- a/board/at91sam9rlek/nandflash/at91sam9rlek.h
-+++ b/board/at91sam9rlek/nandflash/at91sam9rlek.h
-@@ -112,7 +112,7 @@
- #define	IMG_SIZE		0x40000		/* Image Size in NandFlash    */
- 
- #define MACH_TYPE       1326       		/* AT91SAM9RL-EK */
--#define JUMP_ADDR		0x23F00000	/* Final Jump Address 	      */
-+#define JUMP_ADDR		0x21F00000	/* Final Jump Address 	      */
- 
- /* ******************************************************************* */
- /* Application Settings                                                */
-diff --git a/board/at91sam9xeek/dataflash/at91sam9xeek.h b/board/at91sam9xeek/dataflash/at91sam9xeek.h
-index 27d1822..08e515d 100644
---- a/board/at91sam9xeek/dataflash/at91sam9xeek.h
-+++ b/board/at91sam9xeek/dataflash/at91sam9xeek.h
-@@ -74,10 +74,10 @@
- #define AT91C_SPI_PCS_DATAFLASH		AT91C_SPI_PCS1_DATAFLASH	/* Boot on SPI NCS1 */
- 
- #define IMG_ADDRESS 		0x8400			/* Image Address in DataFlash */
--#define	IMG_SIZE		0x33900			/* Image Size in DataFlash    */
-+#define	IMG_SIZE		0x7BC00			/* Image Size in DataFlash    */
- 
- #define MACH_TYPE		0x44B			/* AT91SAM9XE-EK same id as AT91SAM9260-EK*/
--#define JUMP_ADDR		0x23F00000		/* Final Jump Address 	      */
-+#define JUMP_ADDR		0x21F00000		/* Final Jump Address 	      */
- 
- /* ******************************************************************* */
- /* Application Settings                                                */
-diff --git a/board/at91sam9xeek/nandflash/at91sam9xeek.h b/board/at91sam9xeek/nandflash/at91sam9xeek.h
-index 5dbc63e..9fac7cb 100644
---- a/board/at91sam9xeek/nandflash/at91sam9xeek.h
-+++ b/board/at91sam9xeek/nandflash/at91sam9xeek.h
-@@ -94,7 +94,7 @@
- #define	IMG_SIZE		0x40000		/* Image Size in NandFlash    */
- 
- #define MACH_TYPE		0x44B			/* AT91SAM9XE-EK same id as AT91SAM9260-EK*/
--#define JUMP_ADDR		0x23F00000		/* Final Jump Address 	      */
-+#define JUMP_ADDR		0x21F00000		/* Final Jump Address 	      */
- 
- /* ******************************************************************* */
- /* Application Settings                                                */
--- 
-1.7.9.5
-

boot/at91bootstrap/at91bootstrap.mk

@@ -1,50 +0,0 @@
-#############################################################
-#
-# at91bootstrap
-#
-#############################################################
-AT91BOOTSTRAP_VERSION = 1.16
-AT91BOOTSTRAP_SITE = ftp://www.at91.com/pub/at91bootstrap/
-AT91BOOTSTRAP_SOURCE = AT91Bootstrap$(AT91BOOTSTRAP_VERSION).zip
-
-AT91BOOTSTRAP_BOARD = $(call qstrip,$(BR2_TARGET_AT91BOOTSTRAP_BOARD))
-AT91BOOTSTRAP_MEMORY = $(call qstrip,$(BR2_TARGET_AT91BOOTSTRAP_MEMORY))
-AT91BOOTSTRAP_MAKE_SUBDIR = board/$(AT91BOOTSTRAP_BOARD)/$(AT91BOOTSTRAP_MEMORY)
-AT91BOOTSTRAP_BINARY = $(AT91BOOTSTRAP_MAKE_SUBDIR)/$(AT91BOOTSTRAP_MEMORY)_$(AT91BOOTSTRAP_BOARD).bin
-
-AT91BOOTSTRAP_INSTALL_IMAGES = YES
-AT91BOOTSTRAP_INSTALL_TARGET = NO
-
-define AT91BOOTSTRAP_EXTRACT_CMDS
-	unzip -d $(BUILD_DIR) $(DL_DIR)/$(AT91BOOTSTRAP_SOURCE)
-	mv $(BUILD_DIR)/Bootstrap-v$(AT91BOOTSTRAP_VERSION)/* $(@D)
-	rmdir $(BUILD_DIR)/Bootstrap-v$(AT91BOOTSTRAP_VERSION)
-endef
-
-ifneq ($(call qstrip,$(BR2_TARGET_AT91BOOTSTRAP_CUSTOM_PATCH_DIR)),)
-define AT91BOOTSTRAP_APPLY_CUSTOM_PATCHES
-	support/scripts/apply-patches.sh $(@D) $(BR2_TARGET_AT91BOOTSTRAP_CUSTOM_PATCH_DIR) \
-		at91bootstrap-$(AT91BOOTSTRAP_VERSION)-\*.patch
-endef
-
-AT91BOOTSTRAP_POST_PATCH_HOOKS += AT91BOOTSTRAP_APPLY_CUSTOM_PATCHES
-endif
-
-define AT91BOOTSTRAP_BUILD_CMDS
-	$(MAKE1) CROSS_COMPILE=$(TARGET_CROSS) -C $(@D)/$(AT91BOOTSTRAP_MAKE_SUBDIR)
-endef
-
-define AT91BOOTSTRAP_INSTALL_IMAGES_CMDS
-	cp $(@D)/$(AT91BOOTSTRAP_BINARY) $(BINARIES_DIR)
-endef
-
-$(eval $(generic-package))
-
-ifeq ($(BR2_TARGET_AT91BOOTSTRAP),y)
-# we NEED a board name unless we're at make source
-ifeq ($(filter source,$(MAKECMDGOALS)),)
-ifeq ($(AT91BOOTSTRAP_BOARD),)
-$(error No AT91Bootstrap board name set. Check your BR2_TARGET_AT91BOOTSTRAP_BOARD setting)
-endif
-endif
-endif

boot/at91bootstrap3/Config.in

@@ -1,53 +0,0 @@
-config BR2_TARGET_AT91BOOTSTRAP3
-	depends on BR2_arm926t
-	bool "AT91 Bootstrap 3"
-	help
-	  AT91Bootstrap is a first level bootloader for the Atmel AT91
-	  devices. It integrates algorithms for:
-	  - Device initialization such as clock configuration, PIO settings...
-	  - Peripheral drivers such as PIO, PMC or SDRAMC...
-	  - Physical media algorithm such as DataFlash, NandFlash, NOR Flash...
-
-if BR2_TARGET_AT91BOOTSTRAP3
-
-config BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_PATCH_DIR
-	string "custom patch dir"
-	help
-	  If your board requires custom patches, add the path to the
-	  directory containing the patches here. The patches must be
-	  named at91bootstrap3-<something>.patch.
-
-	  Most users may leave this empty
-
-#
-# Configuration selection
-#
-
-choice
-	prompt "AT91 Bootstrap 3 configuration"
-	default BR2_TARGET_AT91BOOTSTRAP3_USE_DEFCONFIG
-
-config BR2_TARGET_AT91BOOTSTRAP3_USE_DEFCONFIG
-	bool "Using a defconfig"
-
-config BR2_TARGET_AT91BOOTSTRAP3_USE_CUSTOM_CONFIG
-	bool "Using a custom config file"
-
-endchoice
-
-config BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG
-	string "Defconfig name"
-	depends on BR2_TARGET_AT91BOOTSTRAP3_USE_DEFCONFIG
-	help
-	  Name of the at91bootstrap3 defconfig file to use, without the
-	  trailing _defconfig.  The defconfig is located at
-	  board/<processor>/<board>_defconfig in the at91bootstrap3
-	  tree.
-
-config BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_CONFIG_FILE
-	string "Configuration file path"
-	depends on BR2_TARGET_AT91BOOTSTRAP3_USE_CUSTOM_CONFIG
-	help
-	  Path to the at91bootstrap3 configuration file
-
-endif # BR2_TARGET_AT91BOOTSTRAP3

boot/at91bootstrap3/at91bootstrap3-u-boot-relocation-fix.patch

@@ -1,747 +0,0 @@
-Every AT91SAM plaforms were broken between 2010.12 and 2011.03 because
-of the relocation changes.
-
-We have to get JUMP_ADDR consistent with what is used by u-boot
-(CONFIG_SYS_TEXT_BASE).
-
-I also chose to "repartition" the dataflash. u-boot is now living at
-0x4000, letting 16kB for the bootstrap. We also have to increase the
-IMG_SIZE as u-boot as grown larger than the default value.
-As requested on the u-boot ML, we assume that it could be up to 512kB
-big.
-
-It means that now, you have to flash your kernel at 0x0008C000 instead
-of 0x00042000. And so you also have to load it from that address from
-u-boot.
-
-Then, remember that you could decrease IMG_SIZE to boot faster.
-
-Signed-off-by: Alexandre Belloni <alexandre.belloni@piout.net>
-Signed-off-by: Simon Dawson <spdawson@gmail.com>
-
-diff -Nurp a/board/afeb9260/afeb9260_defconfig b/board/afeb9260/afeb9260_defconfig
---- a/board/afeb9260/afeb9260_defconfig	2011-11-18 08:13:09.000000000 +0000
-+++ b/board/afeb9260/afeb9260_defconfig	2012-07-25 20:52:17.967694276 +0100
-@@ -97,9 +97,9 @@ CONFIG_LOAD_UBOOT=y
- # CONFIG_LOAD_64KB is not set
- # CONFIG_LOAD_1MB is not set
- # CONFIG_LOAD_4MB is not set
--CONFIG_IMG_ADDRESS="0x00008400"
--CONFIG_IMG_SIZE="0x00040000"
--CONFIG_JUMP_ADDR="0x23F00000"
-+CONFIG_IMG_ADDRESS="0x00004000"
-+CONFIG_IMG_SIZE="0x00080000"
-+CONFIG_JUMP_ADDR="0x21F00000"
- CONFIG_APP_CHECK=y
- # CONFIG_LONG_TEST is not set
- # CONFIG_DEBUG is not set
-diff -Nurp a/board/at91cap9adk/at91cap9adk_defconfig b/board/at91cap9adk/at91cap9adk_defconfig
---- a/board/at91cap9adk/at91cap9adk_defconfig	2011-11-18 08:13:09.000000000 +0000
-+++ b/board/at91cap9adk/at91cap9adk_defconfig	2012-07-25 20:52:30.603693814 +0100
-@@ -96,8 +96,8 @@ CONFIG_LOAD_UBOOT=y
- # CONFIG_LOAD_64KB is not set
- # CONFIG_LOAD_1MB is not set
- # CONFIG_LOAD_4MB is not set
--CONFIG_IMG_ADDRESS="0x00008400"
--CONFIG_IMG_SIZE="0x00040000"
-+CONFIG_IMG_ADDRESS="0x00004000"
-+CONFIG_IMG_SIZE="0x00080000"
- CONFIG_JUMP_ADDR="0x73F00000"
- CONFIG_APP_CHECK=y
- # CONFIG_LONG_TEST is not set
-diff -Nurp a/board/at91cap9adk/at91cap9df_defconfig b/board/at91cap9adk/at91cap9df_defconfig
---- a/board/at91cap9adk/at91cap9df_defconfig	2011-11-18 08:13:09.000000000 +0000
-+++ b/board/at91cap9adk/at91cap9df_defconfig	2012-07-25 20:52:23.807694041 +0100
-@@ -96,8 +96,8 @@ CONFIG_LOAD_UBOOT=y
- # CONFIG_LOAD_64KB is not set
- # CONFIG_LOAD_1MB is not set
- # CONFIG_LOAD_4MB is not set
--CONFIG_IMG_ADDRESS="0x00008400"
--CONFIG_IMG_SIZE="0x00040000"
-+CONFIG_IMG_ADDRESS="0x00004000"
-+CONFIG_IMG_SIZE="0x00080000"
- CONFIG_JUMP_ADDR="0x73F00000"
- CONFIG_APP_CHECK=y
- # CONFIG_LONG_TEST is not set
-diff -Nurp a/board/at91cap9adk/at91cap9f_defconfig b/board/at91cap9adk/at91cap9f_defconfig
---- a/board/at91cap9adk/at91cap9f_defconfig	2011-11-18 08:13:09.000000000 +0000
-+++ b/board/at91cap9adk/at91cap9f_defconfig	2012-07-25 21:25:20.839605245 +0100
-@@ -72,7 +72,7 @@ CONFIG_LOAD_UBOOT=y
- # CONFIG_LOAD_1MB is not set
- # CONFIG_LOAD_4MB is not set
- CONFIG_IMG_ADDRESS="0x00008000"
--CONFIG_IMG_SIZE="0x00040000"
-+CONFIG_IMG_SIZE="0x00080000"
- CONFIG_JUMP_ADDR="0x73F00000"
- CONFIG_APP_CHECK=y
- # CONFIG_LONG_TEST is not set
-diff -Nurp a/board/at91cap9stk/at91cap9stk_defconfig b/board/at91cap9stk/at91cap9stk_defconfig
---- a/board/at91cap9stk/at91cap9stk_defconfig	2011-11-18 08:13:09.000000000 +0000
-+++ b/board/at91cap9stk/at91cap9stk_defconfig	2012-07-25 20:52:59.663692456 +0100
-@@ -96,8 +96,8 @@ CONFIG_LOAD_UBOOT=y
- # CONFIG_LOAD_64KB is not set
- # CONFIG_LOAD_1MB is not set
- # CONFIG_LOAD_4MB is not set
--CONFIG_IMG_ADDRESS="0x00008400"
--CONFIG_IMG_SIZE="0x00040000"
-+CONFIG_IMG_ADDRESS="0x00004000"
-+CONFIG_IMG_SIZE="0x00080000"
- CONFIG_JUMP_ADDR="0x73F00000"
- CONFIG_APP_CHECK=y
- # CONFIG_LONG_TEST is not set
-diff -Nurp a/board/at91cap9stk/at91cap9stkdf_defconfig b/board/at91cap9stk/at91cap9stkdf_defconfig
---- a/board/at91cap9stk/at91cap9stkdf_defconfig	2011-11-18 08:13:09.000000000 +0000
-+++ b/board/at91cap9stk/at91cap9stkdf_defconfig	2012-07-25 20:52:52.255692671 +0100
-@@ -96,8 +96,8 @@ CONFIG_LOAD_UBOOT=y
- # CONFIG_LOAD_64KB is not set
- # CONFIG_LOAD_1MB is not set
- # CONFIG_LOAD_4MB is not set
--CONFIG_IMG_ADDRESS="0x00008400"
--CONFIG_IMG_SIZE="0x00040000"
-+CONFIG_IMG_ADDRESS="0x00004000"
-+CONFIG_IMG_SIZE="0x00080000"
- CONFIG_JUMP_ADDR="0x73F00000"
- CONFIG_APP_CHECK=y
- # CONFIG_LONG_TEST is not set
-diff -Nurp a/board/at91cap9stk/at91cap9stkf_defconfig b/board/at91cap9stk/at91cap9stkf_defconfig
---- a/board/at91cap9stk/at91cap9stkf_defconfig	2011-11-18 08:13:09.000000000 +0000
-+++ b/board/at91cap9stk/at91cap9stkf_defconfig	2012-07-25 21:25:35.235605140 +0100
-@@ -72,7 +72,7 @@ CONFIG_LOAD_UBOOT=y
- # CONFIG_LOAD_1MB is not set
- # CONFIG_LOAD_4MB is not set
- CONFIG_IMG_ADDRESS="0x00008000"
--CONFIG_IMG_SIZE="0x00040000"
-+CONFIG_IMG_SIZE="0x00080000"
- CONFIG_JUMP_ADDR="0x73F00000"
- CONFIG_APP_CHECK=y
- # CONFIG_LONG_TEST is not set
-diff -Nurp a/board/at91sam9260ek/at91sam9260dfc_defconfig b/board/at91sam9260ek/at91sam9260dfc_defconfig
---- a/board/at91sam9260ek/at91sam9260dfc_defconfig	2011-11-18 08:13:09.000000000 +0000
-+++ b/board/at91sam9260ek/at91sam9260dfc_defconfig	2012-07-25 20:35:23.259739521 +0100
-@@ -97,9 +97,9 @@ CONFIG_LOAD_UBOOT=y
- # CONFIG_LOAD_64KB is not set
- # CONFIG_LOAD_1MB is not set
- # CONFIG_LOAD_4MB is not set
--CONFIG_IMG_ADDRESS="0x00008400"
--CONFIG_IMG_SIZE="0x00040000"
--CONFIG_JUMP_ADDR="0x23F00000"
-+CONFIG_IMG_ADDRESS="0x00004000"
-+CONFIG_IMG_SIZE="0x00080000"
-+CONFIG_JUMP_ADDR="0x21F00000"
- CONFIG_APP_CHECK=y
- # CONFIG_LONG_TEST is not set
- # CONFIG_DEBUG is not set
-diff -Nurp a/board/at91sam9260ek/at91sam9260df_defconfig b/board/at91sam9260ek/at91sam9260df_defconfig
---- a/board/at91sam9260ek/at91sam9260df_defconfig	2011-11-18 08:13:09.000000000 +0000
-+++ b/board/at91sam9260ek/at91sam9260df_defconfig	2012-07-25 20:34:19.231742964 +0100
-@@ -102,11 +102,11 @@ CONFIG_LOAD_UBOOT=y
- # CONFIG_LOAD_64KB is not set
- # CONFIG_LOAD_1MB is not set
- # CONFIG_LOAD_4MB is not set
--CONFIG_IMG_ADDRESS="0x00008400"
-+CONFIG_IMG_ADDRESS="0x00004000"
- CONFIG_SETTING_ADDRESS="0x00408400"
- CONFIG_SETTING_SIZE="0x00001000"
--CONFIG_IMG_SIZE="0x00040000"
--CONFIG_JUMP_ADDR="0x23F00000"
-+CONFIG_IMG_SIZE="0x00080000"
-+CONFIG_JUMP_ADDR="0x21F00000"
- CONFIG_GLBDRV_ADDR="0x20058000"
- # CONFIG_LONG_TEST is not set
- # CONFIG_DEBUG is not set
-diff -Nurp a/board/at91sam9260ek/at91sam9260ek_defconfig b/board/at91sam9260ek/at91sam9260ek_defconfig
---- a/board/at91sam9260ek/at91sam9260ek_defconfig	2011-11-18 08:13:09.000000000 +0000
-+++ b/board/at91sam9260ek/at91sam9260ek_defconfig	2012-07-25 20:32:17.711747794 +0100
-@@ -102,11 +102,11 @@ CONFIG_LOAD_UBOOT=y
- # CONFIG_LOAD_64KB is not set
- # CONFIG_LOAD_1MB is not set
- # CONFIG_LOAD_4MB is not set
--CONFIG_IMG_ADDRESS="0x00008400"
-+CONFIG_IMG_ADDRESS="0x00004000"
- CONFIG_SETTING_ADDRESS="0x00408400"
- CONFIG_SETTING_SIZE="0x00001000"
--CONFIG_IMG_SIZE="0x00040000"
--CONFIG_JUMP_ADDR="0x23F00000"
-+CONFIG_IMG_SIZE="0x00080000"
-+CONFIG_JUMP_ADDR="0x21F00000"
- CONFIG_GLBDRV_ADDR="0x20058000"
- # CONFIG_LONG_TEST is not set
- # CONFIG_DEBUG is not set
-diff -Nurp a/board/at91sam9260ek/at91sam9260nf_defconfig b/board/at91sam9260ek/at91sam9260nf_defconfig
---- a/board/at91sam9260ek/at91sam9260nf_defconfig	2011-11-18 08:13:09.000000000 +0000
-+++ b/board/at91sam9260ek/at91sam9260nf_defconfig	2012-07-25 21:25:57.079604719 +0100
-@@ -87,8 +87,8 @@ CONFIG_LOAD_UBOOT=y
- CONFIG_IMG_ADDRESS="0x00020000"
- CONFIG_SETTING_ADDRESS="0x01FE0000"
- CONFIG_SETTING_SIZE="0x00001000"
--CONFIG_IMG_SIZE="0x00040000"
--CONFIG_JUMP_ADDR="0x23F00000"
-+CONFIG_IMG_SIZE="0x00080000"
-+CONFIG_JUMP_ADDR="0x21F00000"
- CONFIG_GLBDRV_ADDR="0x20058000"
- # CONFIG_LONG_TEST is not set
- # CONFIG_DEBUG is not set
-diff -Nurp a/board/at91sam9261ek/at91sam9261dfc_defconfig b/board/at91sam9261ek/at91sam9261dfc_defconfig
---- a/board/at91sam9261ek/at91sam9261dfc_defconfig	2011-11-18 08:13:09.000000000 +0000
-+++ b/board/at91sam9261ek/at91sam9261dfc_defconfig	2012-07-25 20:37:07.515735228 +0100
-@@ -97,9 +97,9 @@ CONFIG_LOAD_UBOOT=y
- # CONFIG_LOAD_64KB is not set
- # CONFIG_LOAD_1MB is not set
- # CONFIG_LOAD_4MB is not set
--CONFIG_IMG_ADDRESS="0x00008400"
--CONFIG_IMG_SIZE="0x00040000"
--CONFIG_JUMP_ADDR="0x23F00000"
-+CONFIG_IMG_ADDRESS="0x00004000"
-+CONFIG_IMG_SIZE="0x00080000"
-+CONFIG_JUMP_ADDR="0x21F00000"
- CONFIG_APP_CHECK=y
- # CONFIG_LONG_TEST is not set
- CONFIG_DEBUG=y
-diff -Nurp a/board/at91sam9261ek/at91sam9261df_defconfig b/board/at91sam9261ek/at91sam9261df_defconfig
---- a/board/at91sam9261ek/at91sam9261df_defconfig	2011-11-18 08:13:09.000000000 +0000
-+++ b/board/at91sam9261ek/at91sam9261df_defconfig	2012-07-25 20:36:44.351735615 +0100
-@@ -102,11 +102,11 @@ CONFIG_LOAD_UBOOT=y
- # CONFIG_LOAD_64KB is not set
- # CONFIG_LOAD_1MB is not set
- # CONFIG_LOAD_4MB is not set
--CONFIG_IMG_ADDRESS="0x00008400"
-+CONFIG_IMG_ADDRESS="0x00004000"
- CONFIG_SETTING_ADDRESS="0x00408400"
- CONFIG_SETTING_SIZE="0x00001000"
--CONFIG_IMG_SIZE="0x00040000"
--CONFIG_JUMP_ADDR="0x23F00000"
-+CONFIG_IMG_SIZE="0x00080000"
-+CONFIG_JUMP_ADDR="0x21F00000"
- CONFIG_GLBDRV_ADDR="0x20058000"
- # CONFIG_LONG_TEST is not set
- CONFIG_DEBUG=y
-diff -Nurp a/board/at91sam9261ek/at91sam9261ek_defconfig b/board/at91sam9261ek/at91sam9261ek_defconfig
---- a/board/at91sam9261ek/at91sam9261ek_defconfig	2011-11-18 08:13:09.000000000 +0000
-+++ b/board/at91sam9261ek/at91sam9261ek_defconfig	2012-07-25 20:36:09.111737459 +0100
-@@ -102,11 +102,11 @@ CONFIG_LOAD_UBOOT=y
- # CONFIG_LOAD_64KB is not set
- # CONFIG_LOAD_1MB is not set
- # CONFIG_LOAD_4MB is not set
--CONFIG_IMG_ADDRESS="0x00008400"
-+CONFIG_IMG_ADDRESS="0x00004000"
- CONFIG_SETTING_ADDRESS="0x00408400"
- CONFIG_SETTING_SIZE="0x00001000"
--CONFIG_IMG_SIZE="0x00040000"
--CONFIG_JUMP_ADDR="0x23F00000"
-+CONFIG_IMG_SIZE="0x00080000"
-+CONFIG_JUMP_ADDR="0x21F00000"
- CONFIG_GLBDRV_ADDR="0x20058000"
- # CONFIG_LONG_TEST is not set
- CONFIG_DEBUG=y
-diff -Nurp a/board/at91sam9261ek/at91sam9261nf_defconfig b/board/at91sam9261ek/at91sam9261nf_defconfig
---- a/board/at91sam9261ek/at91sam9261nf_defconfig	2011-11-18 08:13:09.000000000 +0000
-+++ b/board/at91sam9261ek/at91sam9261nf_defconfig	2012-07-25 21:24:45.843607437 +0100
-@@ -86,8 +86,8 @@ CONFIG_LOAD_UBOOT=y
- CONFIG_IMG_ADDRESS="0x00020000"
- CONFIG_SETTING_ADDRESS="0x01FE0000"
- CONFIG_SETTING_SIZE="0x00001000"
--CONFIG_IMG_SIZE="0x00040000"
--CONFIG_JUMP_ADDR="0x23F00000"
-+CONFIG_IMG_SIZE="0x00080000"
-+CONFIG_JUMP_ADDR="0x21F00000"
- CONFIG_GLBDRV_ADDR="0x20058000"
- # CONFIG_LONG_TEST is not set
- CONFIG_DEBUG=y
-diff -Nurp a/board/at91sam9263ek/at91sam9263dfc_defconfig b/board/at91sam9263ek/at91sam9263dfc_defconfig
---- a/board/at91sam9263ek/at91sam9263dfc_defconfig	2011-11-18 08:13:09.000000000 +0000
-+++ b/board/at91sam9263ek/at91sam9263dfc_defconfig	2012-07-25 20:38:55.555730059 +0100
-@@ -100,9 +100,9 @@ CONFIG_LOAD_UBOOT=y
- # CONFIG_LOAD_64KB is not set
- # CONFIG_LOAD_1MB is not set
- # CONFIG_LOAD_4MB is not set
--CONFIG_IMG_ADDRESS="0x00008400"
--CONFIG_IMG_SIZE="0x00040000"
--CONFIG_JUMP_ADDR="0x23F00000"
-+CONFIG_IMG_ADDRESS="0x00004000"
-+CONFIG_IMG_SIZE="0x00080000"
-+CONFIG_JUMP_ADDR="0x21F00000"
- CONFIG_APP_CHECK=y
- # CONFIG_LONG_TEST is not set
- CONFIG_DEBUG=y
-diff -Nurp a/board/at91sam9263ek/at91sam9263df_defconfig b/board/at91sam9263ek/at91sam9263df_defconfig
---- a/board/at91sam9263ek/at91sam9263df_defconfig	2011-11-18 08:13:09.000000000 +0000
-+++ b/board/at91sam9263ek/at91sam9263df_defconfig	2012-07-25 20:38:37.395730195 +0100
-@@ -105,11 +105,11 @@ CONFIG_LOAD_UBOOT=y
- # CONFIG_LOAD_64KB is not set
- # CONFIG_LOAD_1MB is not set
- # CONFIG_LOAD_4MB is not set
--CONFIG_IMG_ADDRESS="0x00008400"
-+CONFIG_IMG_ADDRESS="0x00004000"
- CONFIG_SETTING_ADDRESS="0x00408400"
- CONFIG_SETTING_SIZE="0x00001000"
--CONFIG_IMG_SIZE="0x00040000"
--CONFIG_JUMP_ADDR="0x23F00000"
-+CONFIG_IMG_SIZE="0x00080000"
-+CONFIG_JUMP_ADDR="0x21F00000"
- CONFIG_GLBDRV_ADDR="0x2006b000"
- # CONFIG_LONG_TEST is not set
- CONFIG_DEBUG=y
-diff -Nurp a/board/at91sam9263ek/at91sam9263ek_defconfig b/board/at91sam9263ek/at91sam9263ek_defconfig
---- a/board/at91sam9263ek/at91sam9263ek_defconfig	2011-11-18 08:13:09.000000000 +0000
-+++ b/board/at91sam9263ek/at91sam9263ek_defconfig	2012-07-25 20:38:08.379732395 +0100
-@@ -105,11 +105,11 @@ CONFIG_LOAD_UBOOT=y
- # CONFIG_LOAD_64KB is not set
- # CONFIG_LOAD_1MB is not set
- # CONFIG_LOAD_4MB is not set
--CONFIG_IMG_ADDRESS="0x00008400"
-+CONFIG_IMG_ADDRESS="0x00004000"
- CONFIG_SETTING_ADDRESS="0x00408400"
- CONFIG_SETTING_SIZE="0x00001000"
--CONFIG_IMG_SIZE="0x00040000"
--CONFIG_JUMP_ADDR="0x23F00000"
-+CONFIG_IMG_SIZE="0x00080000"
-+CONFIG_JUMP_ADDR="0x21F00000"
- CONFIG_GLBDRV_ADDR="0x2006b000"
- # CONFIG_LONG_TEST is not set
- CONFIG_DEBUG=y
-diff -Nurp a/board/at91sam9263ek/at91sam9263nf_defconfig b/board/at91sam9263ek/at91sam9263nf_defconfig
---- a/board/at91sam9263ek/at91sam9263nf_defconfig	2011-11-18 08:13:09.000000000 +0000
-+++ b/board/at91sam9263ek/at91sam9263nf_defconfig	2012-07-25 21:25:39.195605069 +0100
-@@ -89,8 +89,8 @@ CONFIG_LOAD_UBOOT=y
- CONFIG_IMG_ADDRESS="0x00020000"
- CONFIG_SETTING_ADDRESS="0x01FE0000"
- CONFIG_SETTING_SIZE="0x00001000"
--CONFIG_IMG_SIZE="0x00040000"
--CONFIG_JUMP_ADDR="0x23F00000"
-+CONFIG_IMG_SIZE="0x00080000"
-+CONFIG_JUMP_ADDR="0x21F00000"
- CONFIG_GLBDRV_ADDR="0x2006b000"
- # CONFIG_LONG_TEST is not set
- CONFIG_DEBUG=y
-diff -Nurp a/board/at91sam9g10ek/at91sam9g10df_defconfig b/board/at91sam9g10ek/at91sam9g10df_defconfig
---- a/board/at91sam9g10ek/at91sam9g10df_defconfig	2011-11-18 08:13:09.000000000 +0000
-+++ b/board/at91sam9g10ek/at91sam9g10df_defconfig	2012-07-25 20:40:18.087726292 +0100
-@@ -102,11 +102,11 @@ CONFIG_LOAD_UBOOT=y
- # CONFIG_LOAD_64KB is not set
- # CONFIG_LOAD_1MB is not set
- # CONFIG_LOAD_4MB is not set
--CONFIG_IMG_ADDRESS="0x00008400"
-+CONFIG_IMG_ADDRESS="0x00004000"
- CONFIG_SETTING_ADDRESS="0x00408400"
- CONFIG_SETTING_SIZE="0x00001000"
--CONFIG_IMG_SIZE="0x00040000"
--CONFIG_JUMP_ADDR="0x23F00000"
-+CONFIG_IMG_SIZE="0x00080000"
-+CONFIG_JUMP_ADDR="0x21F00000"
- CONFIG_GLBDRV_ADDR="0x20068000"
- # CONFIG_LONG_TEST is not set
- CONFIG_DEBUG=y
-diff -Nurp a/board/at91sam9g10ek/at91sam9g10ek_defconfig b/board/at91sam9g10ek/at91sam9g10ek_defconfig
---- a/board/at91sam9g10ek/at91sam9g10ek_defconfig	2011-11-18 08:13:09.000000000 +0000
-+++ b/board/at91sam9g10ek/at91sam9g10ek_defconfig	2012-07-25 20:39:53.543727636 +0100
-@@ -102,11 +102,11 @@ CONFIG_LOAD_UBOOT=y
- # CONFIG_LOAD_64KB is not set
- # CONFIG_LOAD_1MB is not set
- # CONFIG_LOAD_4MB is not set
--CONFIG_IMG_ADDRESS="0x00008400"
-+CONFIG_IMG_ADDRESS="0x00004000"
- CONFIG_SETTING_ADDRESS="0x00408400"
- CONFIG_SETTING_SIZE="0x00001000"
--CONFIG_IMG_SIZE="0x00040000"
--CONFIG_JUMP_ADDR="0x23F00000"
-+CONFIG_IMG_SIZE="0x00080000"
-+CONFIG_JUMP_ADDR="0x21F00000"
- CONFIG_GLBDRV_ADDR="0x20068000"
- # CONFIG_LONG_TEST is not set
- CONFIG_DEBUG=y
-diff -Nurp a/board/at91sam9g10ek/at91sam9g10nf_defconfig b/board/at91sam9g10ek/at91sam9g10nf_defconfig
---- a/board/at91sam9g10ek/at91sam9g10nf_defconfig	2011-11-18 08:13:09.000000000 +0000
-+++ b/board/at91sam9g10ek/at91sam9g10nf_defconfig	2012-07-25 21:25:28.975605503 +0100
-@@ -86,8 +86,8 @@ CONFIG_LOAD_UBOOT=y
- CONFIG_IMG_ADDRESS="0x00020000"
- CONFIG_SETTING_ADDRESS="0x01FE0000"
- CONFIG_SETTING_SIZE="0x00001000"
--CONFIG_IMG_SIZE="0x00040000"
--CONFIG_JUMP_ADDR="0x23F00000"
-+CONFIG_IMG_SIZE="0x00080000"
-+CONFIG_JUMP_ADDR="0x21F00000"
- CONFIG_GLBDRV_ADDR="0x20068000"
- # CONFIG_LONG_TEST is not set
- CONFIG_DEBUG=y
-diff -Nurp a/board/at91sam9g20ek/at91sam9g20dfc_defconfig b/board/at91sam9g20ek/at91sam9g20dfc_defconfig
---- a/board/at91sam9g20ek/at91sam9g20dfc_defconfig	2011-11-18 08:13:09.000000000 +0000
-+++ b/board/at91sam9g20ek/at91sam9g20dfc_defconfig	2012-07-25 20:41:48.275722343 +0100
-@@ -97,9 +97,9 @@ CONFIG_LOAD_UBOOT=y
- # CONFIG_LOAD_64KB is not set
- # CONFIG_LOAD_1MB is not set
- # CONFIG_LOAD_4MB is not set
--CONFIG_IMG_ADDRESS="0x00008400"
--CONFIG_IMG_SIZE="0x00040000"
--CONFIG_JUMP_ADDR="0x23F00000"
-+CONFIG_IMG_ADDRESS="0x00004000"
-+CONFIG_IMG_SIZE="0x00080000"
-+CONFIG_JUMP_ADDR="0x21F00000"
- CONFIG_APP_CHECK=y
- # CONFIG_LONG_TEST is not set
- CONFIG_DEBUG=y
-diff -Nurp a/board/at91sam9g20ek/at91sam9g20df_defconfig b/board/at91sam9g20ek/at91sam9g20df_defconfig
---- a/board/at91sam9g20ek/at91sam9g20df_defconfig	2011-11-18 08:13:09.000000000 +0000
-+++ b/board/at91sam9g20ek/at91sam9g20df_defconfig	2012-07-25 20:42:07.091721310 +0100
-@@ -102,11 +102,11 @@ CONFIG_LOAD_UBOOT=y
- # CONFIG_LOAD_64KB is not set
- # CONFIG_LOAD_1MB is not set
- # CONFIG_LOAD_4MB is not set
--CONFIG_IMG_ADDRESS="0x00008400"
-+CONFIG_IMG_ADDRESS="0x00004000"
- CONFIG_SETTING_ADDRESS="0x00408400"
- CONFIG_SETTING_SIZE="0x00001000"
--CONFIG_IMG_SIZE="0x00040000"
--CONFIG_JUMP_ADDR="0x23F00000"
-+CONFIG_IMG_SIZE="0x00080000"
-+CONFIG_JUMP_ADDR="0x21F00000"
- CONFIG_GLBDRV_ADDR="0x20058000"
- # CONFIG_LONG_TEST is not set
- CONFIG_DEBUG=y
-diff -Nurp a/board/at91sam9g20ek/at91sam9g20ek_defconfig b/board/at91sam9g20ek/at91sam9g20ek_defconfig
---- a/board/at91sam9g20ek/at91sam9g20ek_defconfig	2011-11-18 08:13:09.000000000 +0000
-+++ b/board/at91sam9g20ek/at91sam9g20ek_defconfig	2012-07-25 20:41:23.179723541 +0100
-@@ -102,11 +102,11 @@ CONFIG_LOAD_UBOOT=y
- # CONFIG_LOAD_64KB is not set
- # CONFIG_LOAD_1MB is not set
- # CONFIG_LOAD_4MB is not set
--CONFIG_IMG_ADDRESS="0x00008400"
-+CONFIG_IMG_ADDRESS="0x00004000"
- CONFIG_SETTING_ADDRESS="0x00408400"
- CONFIG_SETTING_SIZE="0x00001000"
--CONFIG_IMG_SIZE="0x00040000"
--CONFIG_JUMP_ADDR="0x23F00000"
-+CONFIG_IMG_SIZE="0x00080000"
-+CONFIG_JUMP_ADDR="0x21F00000"
- CONFIG_GLBDRV_ADDR="0x20058000"
- # CONFIG_LONG_TEST is not set
- CONFIG_DEBUG=y
-diff -Nurp a/board/at91sam9g20ek/at91sam9g20nf_defconfig b/board/at91sam9g20ek/at91sam9g20nf_defconfig
---- a/board/at91sam9g20ek/at91sam9g20nf_defconfig	2011-11-18 08:13:09.000000000 +0000
-+++ b/board/at91sam9g20ek/at91sam9g20nf_defconfig	2012-07-25 21:25:49.291603975 +0100
-@@ -87,8 +87,8 @@ CONFIG_LOAD_UBOOT=y
- CONFIG_IMG_ADDRESS="0x00020000"
- CONFIG_SETTING_ADDRESS="0x01FE0000"
- CONFIG_SETTING_SIZE="0x00001000"
--CONFIG_IMG_SIZE="0x00040000"
--CONFIG_JUMP_ADDR="0x23F00000"
-+CONFIG_IMG_SIZE="0x00080000"
-+CONFIG_JUMP_ADDR="0x21F00000"
- CONFIG_GLBDRV_ADDR="0x20058000"
- # CONFIG_LONG_TEST is not set
- CONFIG_DEBUG=y
-diff -Nurp a/board/at91sam9g45ek/at91sam9g45df_defconfig b/board/at91sam9g45ek/at91sam9g45df_defconfig
---- a/board/at91sam9g45ek/at91sam9g45df_defconfig	2011-11-18 08:13:09.000000000 +0000
-+++ b/board/at91sam9g45ek/at91sam9g45df_defconfig	2012-07-25 20:47:46.055707221 +0100
-@@ -102,10 +102,10 @@ CONFIG_LOAD_UBOOT=y
- # CONFIG_LOAD_64KB is not set
- # CONFIG_LOAD_1MB is not set
- # CONFIG_LOAD_4MB is not set
--CONFIG_IMG_ADDRESS="0x00008400"
-+CONFIG_IMG_ADDRESS="0x00004000"
- CONFIG_SETTING_ADDRESS="0x00408400"
- CONFIG_SETTING_SIZE="0x00001000"
--CONFIG_IMG_SIZE="0x00040000"
-+CONFIG_IMG_SIZE="0x00080000"
- CONFIG_JUMP_ADDR="0x73F00000"
- CONFIG_GLBDRV_ADDR="0x7006b000"
- # CONFIG_LONG_TEST is not set
-diff -Nurp a/board/at91sam9g45ek/at91sam9g45ek_defconfig b/board/at91sam9g45ek/at91sam9g45ek_defconfig
---- a/board/at91sam9g45ek/at91sam9g45ek_defconfig	2011-11-18 08:13:09.000000000 +0000
-+++ b/board/at91sam9g45ek/at91sam9g45ek_defconfig	2012-07-25 20:47:02.303708341 +0100
-@@ -102,10 +102,10 @@ CONFIG_LOAD_UBOOT=y
- # CONFIG_LOAD_64KB is not set
- # CONFIG_LOAD_1MB is not set
- # CONFIG_LOAD_4MB is not set
--CONFIG_IMG_ADDRESS="0x00008400"
-+CONFIG_IMG_ADDRESS="0x00004000"
- CONFIG_SETTING_ADDRESS="0x00408400"
- CONFIG_SETTING_SIZE="0x00001000"
--CONFIG_IMG_SIZE="0x00040000"
-+CONFIG_IMG_SIZE="0x00080000"
- CONFIG_JUMP_ADDR="0x73F00000"
- CONFIG_GLBDRV_ADDR="0x7006b000"
- # CONFIG_LONG_TEST is not set
-diff -Nurp a/board/at91sam9g45ek/at91sam9g45nf_defconfig b/board/at91sam9g45ek/at91sam9g45nf_defconfig
---- a/board/at91sam9g45ek/at91sam9g45nf_defconfig	2011-11-18 08:13:09.000000000 +0000
-+++ b/board/at91sam9g45ek/at91sam9g45nf_defconfig	2012-07-25 21:25:24.547605601 +0100
-@@ -86,7 +86,7 @@ CONFIG_LOAD_UBOOT=y
- CONFIG_IMG_ADDRESS="0x00020000"
- CONFIG_SETTING_ADDRESS="0x01FE0000"
- CONFIG_SETTING_SIZE="0x00001000"
--CONFIG_IMG_SIZE="0x00040000"
-+CONFIG_IMG_SIZE="0x00080000"
- CONFIG_JUMP_ADDR="0x73F00000"
- CONFIG_GLBDRV_ADDR="0x7006b000"
- # CONFIG_LONG_TEST is not set
-diff -Nurp a/board/at91sam9g45ekes/at91sam9g45dfes_defconfig b/board/at91sam9g45ekes/at91sam9g45dfes_defconfig
---- a/board/at91sam9g45ekes/at91sam9g45dfes_defconfig	2011-11-18 08:13:09.000000000 +0000
-+++ b/board/at91sam9g45ekes/at91sam9g45dfes_defconfig	2012-07-25 20:47:33.895706968 +0100
-@@ -102,10 +102,10 @@ CONFIG_LOAD_UBOOT=y
- # CONFIG_LOAD_64KB is not set
- # CONFIG_LOAD_1MB is not set
- # CONFIG_LOAD_4MB is not set
--CONFIG_IMG_ADDRESS="0x00008400"
-+CONFIG_IMG_ADDRESS="0x00004000"
- CONFIG_SETTING_ADDRESS="0x00408400"
- CONFIG_SETTING_SIZE="0x00001000"
--CONFIG_IMG_SIZE="0x00040000"
-+CONFIG_IMG_SIZE="0x00080000"
- CONFIG_JUMP_ADDR="0x73F00000"
- CONFIG_GLBDRV_ADDR="0x7006b000"
- # CONFIG_LONG_TEST is not set
-diff -Nurp a/board/at91sam9g45ekes/at91sam9g45ekes_defconfig b/board/at91sam9g45ekes/at91sam9g45ekes_defconfig
---- a/board/at91sam9g45ekes/at91sam9g45ekes_defconfig	2011-11-18 08:13:09.000000000 +0000
-+++ b/board/at91sam9g45ekes/at91sam9g45ekes_defconfig	2012-07-25 20:46:49.043708951 +0100
-@@ -102,10 +102,10 @@ CONFIG_LOAD_UBOOT=y
- # CONFIG_LOAD_64KB is not set
- # CONFIG_LOAD_1MB is not set
- # CONFIG_LOAD_4MB is not set
--CONFIG_IMG_ADDRESS="0x00008400"
-+CONFIG_IMG_ADDRESS="0x00004000"
- CONFIG_SETTING_ADDRESS="0x00408400"
- CONFIG_SETTING_SIZE="0x00001000"
--CONFIG_IMG_SIZE="0x00040000"
-+CONFIG_IMG_SIZE="0x00080000"
- CONFIG_JUMP_ADDR="0x73F00000"
- CONFIG_GLBDRV_ADDR="0x7006b000"
- # CONFIG_LONG_TEST is not set
-diff -Nurp a/board/at91sam9g45ekes/at91sam9g45nfes_defconfig b/board/at91sam9g45ekes/at91sam9g45nfes_defconfig
---- a/board/at91sam9g45ekes/at91sam9g45nfes_defconfig	2011-11-18 08:13:09.000000000 +0000
-+++ b/board/at91sam9g45ekes/at91sam9g45nfes_defconfig	2012-07-25 21:25:44.823604805 +0100
-@@ -86,7 +86,7 @@ CONFIG_LOAD_UBOOT=y
- CONFIG_IMG_ADDRESS="0x00020000"
- CONFIG_SETTING_ADDRESS="0x01FE0000"
- CONFIG_SETTING_SIZE="0x00001000"
--CONFIG_IMG_SIZE="0x00040000"
-+CONFIG_IMG_SIZE="0x00080000"
- CONFIG_JUMP_ADDR="0x73F00000"
- CONFIG_GLBDRV_ADDR="0x7006b000"
- # CONFIG_LONG_TEST is not set
-diff -Nurp a/board/at91sam9m10ek/at91sam9m10df_defconfig b/board/at91sam9m10ek/at91sam9m10df_defconfig
---- a/board/at91sam9m10ek/at91sam9m10df_defconfig	2011-11-18 08:13:09.000000000 +0000
-+++ b/board/at91sam9m10ek/at91sam9m10df_defconfig	2012-07-25 20:44:34.975714928 +0100
-@@ -102,10 +102,10 @@ CONFIG_LOAD_UBOOT=y
- # CONFIG_LOAD_64KB is not set
- # CONFIG_LOAD_1MB is not set
- # CONFIG_LOAD_4MB is not set
--CONFIG_IMG_ADDRESS="0x00008400"
-+CONFIG_IMG_ADDRESS="0x00004000"
- CONFIG_SETTING_ADDRESS="0x00408400"
- CONFIG_SETTING_SIZE="0x00001000"
--CONFIG_IMG_SIZE="0x00040000"
-+CONFIG_IMG_SIZE="0x00080000"
- CONFIG_JUMP_ADDR="0x73F00000"
- CONFIG_GLBDRV_ADDR="0x7006b000"
- # CONFIG_LONG_TEST is not set
-diff -Nurp a/board/at91sam9m10ek/at91sam9m10ek_defconfig b/board/at91sam9m10ek/at91sam9m10ek_defconfig
---- a/board/at91sam9m10ek/at91sam9m10ek_defconfig	2011-11-18 08:13:09.000000000 +0000
-+++ b/board/at91sam9m10ek/at91sam9m10ek_defconfig	2012-07-25 20:43:34.543717453 +0100
-@@ -102,10 +102,10 @@ CONFIG_LOAD_UBOOT=y
- # CONFIG_LOAD_64KB is not set
- # CONFIG_LOAD_1MB is not set
- # CONFIG_LOAD_4MB is not set
--CONFIG_IMG_ADDRESS="0x00008400"
-+CONFIG_IMG_ADDRESS="0x00004000"
- CONFIG_SETTING_ADDRESS="0x00408400"
- CONFIG_SETTING_SIZE="0x00001000"
--CONFIG_IMG_SIZE="0x00040000"
-+CONFIG_IMG_SIZE="0x00080000"
- CONFIG_JUMP_ADDR="0x73F00000"
- CONFIG_GLBDRV_ADDR="0x7006b000"
- # CONFIG_LONG_TEST is not set
-diff -Nurp a/board/at91sam9m10ek/at91sam9m10nf_defconfig b/board/at91sam9m10ek/at91sam9m10nf_defconfig
---- a/board/at91sam9m10ek/at91sam9m10nf_defconfig	2011-11-18 08:13:09.000000000 +0000
-+++ b/board/at91sam9m10ek/at91sam9m10nf_defconfig	2012-07-25 21:21:40.419615800 +0100
-@@ -86,7 +86,7 @@ CONFIG_LOAD_UBOOT=y
- CONFIG_IMG_ADDRESS="0x00020000"
- CONFIG_SETTING_ADDRESS="0x01FE0000"
- CONFIG_SETTING_SIZE="0x00001000"
--CONFIG_IMG_SIZE="0x00040000"
-+CONFIG_IMG_SIZE="0x00080000"
- CONFIG_JUMP_ADDR="0x73F00000"
- CONFIG_GLBDRV_ADDR="0x7006b000"
- # CONFIG_LONG_TEST is not set
-diff -Nurp a/board/at91sam9m10ekes/at91sam9m10dfes_defconfig b/board/at91sam9m10ekes/at91sam9m10dfes_defconfig
---- a/board/at91sam9m10ekes/at91sam9m10dfes_defconfig	2011-11-18 08:13:09.000000000 +0000
-+++ b/board/at91sam9m10ekes/at91sam9m10dfes_defconfig	2012-07-25 20:44:18.687715650 +0100
-@@ -102,10 +102,10 @@ CONFIG_LOAD_UBOOT=y
- # CONFIG_LOAD_64KB is not set
- # CONFIG_LOAD_1MB is not set
- # CONFIG_LOAD_4MB is not set
--CONFIG_IMG_ADDRESS="0x00008400"
-+CONFIG_IMG_ADDRESS="0x00004000"
- CONFIG_SETTING_ADDRESS="0x00408400"
- CONFIG_SETTING_SIZE="0x00001000"
--CONFIG_IMG_SIZE="0x00040000"
-+CONFIG_IMG_SIZE="0x00080000"
- CONFIG_JUMP_ADDR="0x73F00000"
- CONFIG_GLBDRV_ADDR="0x7006b000"
- # CONFIG_LONG_TEST is not set
-diff -Nurp a/board/at91sam9m10ekes/at91sam9m10ekes_defconfig b/board/at91sam9m10ekes/at91sam9m10ekes_defconfig
---- a/board/at91sam9m10ekes/at91sam9m10ekes_defconfig	2011-11-18 08:13:09.000000000 +0000
-+++ b/board/at91sam9m10ekes/at91sam9m10ekes_defconfig	2012-07-25 20:43:57.255716814 +0100
-@@ -102,10 +102,10 @@ CONFIG_LOAD_UBOOT=y
- # CONFIG_LOAD_64KB is not set
- # CONFIG_LOAD_1MB is not set
- # CONFIG_LOAD_4MB is not set
--CONFIG_IMG_ADDRESS="0x00008400"
-+CONFIG_IMG_ADDRESS="0x00004000"
- CONFIG_SETTING_ADDRESS="0x00408400"
- CONFIG_SETTING_SIZE="0x00001000"
--CONFIG_IMG_SIZE="0x00040000"
-+CONFIG_IMG_SIZE="0x00080000"
- CONFIG_JUMP_ADDR="0x73F00000"
- CONFIG_GLBDRV_ADDR="0x7006b000"
- # CONFIG_LONG_TEST is not set
-diff -Nurp a/board/at91sam9m10ekes/at91sam9m10nfes_defconfig b/board/at91sam9m10ekes/at91sam9m10nfes_defconfig
---- a/board/at91sam9m10ekes/at91sam9m10nfes_defconfig	2011-11-18 08:13:09.000000000 +0000
-+++ b/board/at91sam9m10ekes/at91sam9m10nfes_defconfig	2012-07-25 21:26:10.179603831 +0100
-@@ -86,7 +86,7 @@ CONFIG_LOAD_UBOOT=y
- CONFIG_IMG_ADDRESS="0x00020000"
- CONFIG_SETTING_ADDRESS="0x01FE0000"
- CONFIG_SETTING_SIZE="0x00001000"
--CONFIG_IMG_SIZE="0x00040000"
-+CONFIG_IMG_SIZE="0x00080000"
- CONFIG_JUMP_ADDR="0x73F00000"
- CONFIG_GLBDRV_ADDR="0x7006b000"
- # CONFIG_LONG_TEST is not set
-diff -Nurp a/board/at91sam9n12ek/at91sam9n12df_defconfig b/board/at91sam9n12ek/at91sam9n12df_defconfig
---- a/board/at91sam9n12ek/at91sam9n12df_defconfig	2011-11-18 08:13:09.000000000 +0000
-+++ b/board/at91sam9n12ek/at91sam9n12df_defconfig	2012-07-25 20:52:40.675693207 +0100
-@@ -107,7 +107,7 @@ CONFIG_LOAD_UBOOT=y
- # CONFIG_LOAD_64KB is not set
- # CONFIG_LOAD_1MB is not set
- # CONFIG_LOAD_4MB is not set
--CONFIG_IMG_ADDRESS="0x00008400"
-+CONFIG_IMG_ADDRESS="0x00004000"
- CONFIG_SETTING_ADDRESS="0x00408400"
- CONFIG_SETTING_SIZE="0x00001000"
- CONFIG_IMG_SIZE="0x00050000"
-diff -Nurp a/board/at91sam9rlek/at91sam9rldf_defconfig b/board/at91sam9rlek/at91sam9rldf_defconfig
---- a/board/at91sam9rlek/at91sam9rldf_defconfig	2011-11-18 08:13:09.000000000 +0000
-+++ b/board/at91sam9rlek/at91sam9rldf_defconfig	2012-07-25 20:48:53.183703493 +0100
-@@ -102,11 +102,11 @@ CONFIG_LOAD_UBOOT=y
- # CONFIG_LOAD_64KB is not set
- # CONFIG_LOAD_1MB is not set
- # CONFIG_LOAD_4MB is not set
--CONFIG_IMG_ADDRESS="0x00008400"
-+CONFIG_IMG_ADDRESS="0x00004000"
- CONFIG_SETTING_ADDRESS="0x00408400"
- CONFIG_SETTING_SIZE="0x00001000"
--CONFIG_IMG_SIZE="0x00040000"
--CONFIG_JUMP_ADDR="0x23F00000"
-+CONFIG_IMG_SIZE="0x00080000"
-+CONFIG_JUMP_ADDR="0x21F00000"
- CONFIG_GLBDRV_ADDR="0x2006b000"
- # CONFIG_LONG_TEST is not set
- CONFIG_DEBUG=y
-diff -Nurp a/board/at91sam9rlek/at91sam9rlek_defconfig b/board/at91sam9rlek/at91sam9rlek_defconfig
---- a/board/at91sam9rlek/at91sam9rlek_defconfig	2011-11-18 08:13:09.000000000 +0000
-+++ b/board/at91sam9rlek/at91sam9rlek_defconfig	2012-07-25 20:48:29.659704460 +0100
-@@ -102,11 +102,11 @@ CONFIG_LOAD_UBOOT=y
- # CONFIG_LOAD_64KB is not set
- # CONFIG_LOAD_1MB is not set
- # CONFIG_LOAD_4MB is not set
--CONFIG_IMG_ADDRESS="0x00008400"
-+CONFIG_IMG_ADDRESS="0x00004000"
- CONFIG_SETTING_ADDRESS="0x00408400"
- CONFIG_SETTING_SIZE="0x00001000"
--CONFIG_IMG_SIZE="0x00040000"
--CONFIG_JUMP_ADDR="0x23F00000"
-+CONFIG_IMG_SIZE="0x00080000"
-+CONFIG_JUMP_ADDR="0x21F00000"
- CONFIG_GLBDRV_ADDR="0x2006b000"
- # CONFIG_LONG_TEST is not set
- CONFIG_DEBUG=y
-diff -Nurp a/board/at91sam9rlek/at91sam9rlnf_defconfig b/board/at91sam9rlek/at91sam9rlnf_defconfig
---- a/board/at91sam9rlek/at91sam9rlnf_defconfig	2011-11-18 08:13:09.000000000 +0000
-+++ b/board/at91sam9rlek/at91sam9rlnf_defconfig	2012-07-25 21:24:49.335607485 +0100
-@@ -85,8 +85,8 @@ CONFIG_LOAD_UBOOT=y
- CONFIG_IMG_ADDRESS="0x00020000"
- CONFIG_SETTING_ADDRESS="0x01FE0000"
- CONFIG_SETTING_SIZE="0x00001000"
--CONFIG_IMG_SIZE="0x00040000"
--CONFIG_JUMP_ADDR="0x23F00000"
-+CONFIG_IMG_SIZE="0x00080000"
-+CONFIG_JUMP_ADDR="0x21F00000"
- CONFIG_GLBDRV_ADDR="0x2006b000"
- # CONFIG_LONG_TEST is not set
- CONFIG_DEBUG=y
-diff -Nurp a/board/at91sam9x5ek/at91sam9x5df_defconfig b/board/at91sam9x5ek/at91sam9x5df_defconfig
---- a/board/at91sam9x5ek/at91sam9x5df_defconfig	2011-11-18 08:13:09.000000000 +0000
-+++ b/board/at91sam9x5ek/at91sam9x5df_defconfig	2012-07-25 20:52:45.375693059 +0100
-@@ -106,7 +106,7 @@ CONFIG_LOAD_UBOOT=y
- # CONFIG_LOAD_64KB is not set
- # CONFIG_LOAD_1MB is not set
- # CONFIG_LOAD_4MB is not set
--CONFIG_IMG_ADDRESS="0x00008400"
-+CONFIG_IMG_ADDRESS="0x00004000"
- CONFIG_SETTING_ADDRESS="0x00408400"
- CONFIG_SETTING_SIZE="0x00001000"
- CONFIG_IMG_SIZE="0x00050000"
-diff -Nurp a/board/at91sam9xeek/at91sam9xedfc_defconfig b/board/at91sam9xeek/at91sam9xedfc_defconfig
---- a/board/at91sam9xeek/at91sam9xedfc_defconfig	2011-11-18 08:13:09.000000000 +0000
-+++ b/board/at91sam9xeek/at91sam9xedfc_defconfig	2012-07-25 20:50:10.643699991 +0100
-@@ -96,9 +96,9 @@ CONFIG_LOAD_UBOOT=y
- # CONFIG_LOAD_64KB is not set
- # CONFIG_LOAD_1MB is not set
- # CONFIG_LOAD_4MB is not set
--CONFIG_IMG_ADDRESS="0x00008400"
--CONFIG_IMG_SIZE="0x00040000"
--CONFIG_JUMP_ADDR="0x23F00000"
-+CONFIG_IMG_ADDRESS="0x00004000"
-+CONFIG_IMG_SIZE="0x00080000"
-+CONFIG_JUMP_ADDR="0x21F00000"
- CONFIG_APP_CHECK=y
- # CONFIG_LONG_TEST is not set
- CONFIG_DEBUG=y
-diff -Nurp a/board/at91sam9xeek/at91sam9xedf_defconfig b/board/at91sam9xeek/at91sam9xedf_defconfig
---- a/board/at91sam9xeek/at91sam9xedf_defconfig	2011-11-18 08:13:09.000000000 +0000
-+++ b/board/at91sam9xeek/at91sam9xedf_defconfig	2012-07-25 20:50:26.967699568 +0100
-@@ -103,11 +103,11 @@ CONFIG_LOAD_UBOOT=y
- # CONFIG_LOAD_64KB is not set
- # CONFIG_LOAD_1MB is not set
- # CONFIG_LOAD_4MB is not set
--CONFIG_IMG_ADDRESS="0x00008400"
-+CONFIG_IMG_ADDRESS="0x00004000"
- CONFIG_SETTING_ADDRESS="0x00408400"
- CONFIG_SETTING_SIZE="0x00001000"
--CONFIG_IMG_SIZE="0x00040000"
--CONFIG_JUMP_ADDR="0x23F00000"
-+CONFIG_IMG_SIZE="0x00080000"
-+CONFIG_JUMP_ADDR="0x21F00000"
- CONFIG_GLBDRV_ADDR="0x23F00000"
- # CONFIG_LONG_TEST is not set
- CONFIG_DEBUG=y
-diff -Nurp a/board/at91sam9xeek/at91sam9xeek_defconfig b/board/at91sam9xeek/at91sam9xeek_defconfig
---- a/board/at91sam9xeek/at91sam9xeek_defconfig	2011-11-18 08:13:09.000000000 +0000
-+++ b/board/at91sam9xeek/at91sam9xeek_defconfig	2012-07-25 20:49:46.131699600 +0100
-@@ -103,11 +103,11 @@ CONFIG_LOAD_UBOOT=y
- # CONFIG_LOAD_64KB is not set
- # CONFIG_LOAD_1MB is not set
- # CONFIG_LOAD_4MB is not set
--CONFIG_IMG_ADDRESS="0x00008400"
-+CONFIG_IMG_ADDRESS="0x00004000"
- CONFIG_SETTING_ADDRESS="0x00408400"
- CONFIG_SETTING_SIZE="0x00001000"
--CONFIG_IMG_SIZE="0x00040000"
--CONFIG_JUMP_ADDR="0x23F00000"
-+CONFIG_IMG_SIZE="0x00080000"
-+CONFIG_JUMP_ADDR="0x21F00000"
- CONFIG_GLBDRV_ADDR="0x23F00000"
- # CONFIG_LONG_TEST is not set
- CONFIG_DEBUG=y
-diff -Nurp a/board/at91sam9xeek/at91sam9xenf_defconfig b/board/at91sam9xeek/at91sam9xenf_defconfig
---- a/board/at91sam9xeek/at91sam9xenf_defconfig	2011-11-18 08:13:09.000000000 +0000
-+++ b/board/at91sam9xeek/at91sam9xenf_defconfig	2012-07-25 21:26:05.627603826 +0100
-@@ -88,8 +88,8 @@ CONFIG_LOAD_UBOOT=y
- CONFIG_IMG_ADDRESS="0x00020000"
- CONFIG_SETTING_ADDRESS="0x01FE0000"
- CONFIG_SETTING_SIZE="0x00001000"
--CONFIG_IMG_SIZE="0x00040000"
--CONFIG_JUMP_ADDR="0x23F00000"
-+CONFIG_IMG_SIZE="0x00080000"
-+CONFIG_JUMP_ADDR="0x21F00000"
- CONFIG_GLBDRV_ADDR="0x23F00000"
- # CONFIG_LONG_TEST is not set
- CONFIG_DEBUG=y

boot/at91bootstrap3/at91bootstrap3.mk

@@ -1,67 +0,0 @@
-#############################################################
-#
-# at91bootstrap3
-#
-#############################################################
-AT91BOOTSTRAP3_VERSION = 3.2
-AT91BOOTSTRAP3_SITE = \
-	ftp://www.at91.com/pub/at91bootstrap/AT91Bootstrap$(AT91BOOTSTRAP3_VERSION)
-AT91BOOTSTRAP3_SOURCE = at91bootstrap_9n12.tar.gz
-
-AT91BOOTSTRAP3_INSTALL_IMAGES = YES
-AT91BOOTSTRAP3_INSTALL_TARGET = NO
-
-AT91BOOTSTRAP3_DEFCONFIG = \
-	$(call qstrip,$(BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG))
-AT91BOOTSTRAP3_CUSTOM_CONFIG_FILE = \
-	$(call qstrip,$(BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_CONFIG_FILE))
-AT91BOOTSTRAP3_CUSTOM_PATCH_DIR = \
-	$(call qstrip,$(BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_PATCH_DIR))
-
-AT91BOOTSTRAP3_MAKE_OPT = CROSS_COMPILE=$(TARGET_CROSS) DESTDIR=$(BINARIES_DIR)
-
-ifneq ($(AT91BOOTSTRAP3_CUSTOM_PATCH_DIR),)
-define AT91BOOTSTRAP3_APPLY_CUSTOM_PATCHES
-	support/scripts/apply-patches.sh $(@D) $(AT91BOOTSTRAP3_CUSTOM_PATCH_DIR) \
-		at91bootstrap3-\*.patch
-endef
-
-AT91BOOTSTRAP3_POST_PATCH_HOOKS += AT91BOOTSTRAP3_APPLY_CUSTOM_PATCHES
-endif
-
-ifeq ($(BR2_TARGET_AT91BOOTSTRAP3_USE_DEFCONFIG),y)
-AT91BOOTSTRAP3_SOURCE_CONFIG = \
-	$(@D)/board/*/$(AT91BOOTSTRAP3_DEFCONFIG)_defconfig
-else ifeq ($(BR2_TARGET_AT91BOOTSTRAP3_USE_CUSTOM_CONFIG),y)
-AT91BOOTSTRAP3_SOURCE_CONFIG = $(AT91BOOTSTRAP3_CUSTOM_CONFIG_FILE)
-endif
-
-define AT91BOOTSTRAP3_CONFIGURE_CMDS
-	cp $(AT91BOOTSTRAP3_SOURCE_CONFIG) $(@D)/.config
-	$(SED) 's/image.bin/uImage/' $(@D)/.config
-endef
-
-define AT91BOOTSTRAP3_BUILD_CMDS
-	$(MAKE) $(AT91BOOTSTRAP3_MAKE_OPT) -C $(@D) boot
-endef
-
-define AT91BOOTSTRAP3_INSTALL_IMAGES_CMDS
-	$(MAKE) $(AT91BOOTSTRAP3_MAKE_OPT) -C $(@D) bootstrap
-endef
-
-$(eval $(generic-package))
-
-# Checks to give errors that the user can understand
-ifeq ($(filter source,$(MAKECMDGOALS)),)
-ifeq ($(BR2_TARGET_AT91BOOTSTRAP3_USE_DEFCONFIG),y)
-ifeq ($(AT91BOOTSTRAP3_DEFCONFIG),)
-$(error No at91bootstrap3 defconfig name specified, check your BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG setting)
-endif
-endif
-
-ifeq ($(BR2_TARGET_AT91BOOTSTRAP3_USE_CUSTOM_CONFIG),y)
-ifeq ($(AT91BOOTSTRAP3_CUSTOM_CONFIG_FILE),)
-$(error No at91bootstrap3 configuration file specified, check your BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_CONFIG_FILE setting)
-endif
-endif
-endif

boot/at91dataflashboot/Config.in

@@ -1,3 +0,0 @@
-config BR2_TARGET_AT91DATAFLASHBOOT
-       depends on BR2_arm926t
-       bool "AT91 DataFlashBoot"

boot/at91dataflashboot/at91dataflashboot-1.05-do-not-install.patch

@@ -1,22 +0,0 @@
-Disable the automatic installation of at91dataflashboot since it tries
-to install things to /tftpboot, which is not possible when not
-building as root.
-
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
----
- Makefile |    2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-Index: at91dataflashboot-1.05/Makefile
-===================================================================
---- at91dataflashboot-1.05.orig/Makefile
-+++ at91dataflashboot-1.05/Makefile
-@@ -40,7 +40,7 @@
- 
- I=config.h com.h dataflash.h embedded_services.h main.h stdio.h include/AT91RM9200.h include/lib_AT91RM9200.h 
- 
--all: 	clean $(BINNAME) $(LSSNAME) install
-+all: 	clean $(BINNAME) $(LSSNAME)
- 	$(SIZE) $(OUTNAME)
- 
- # C objects here

boot/at91dataflashboot/at91dataflashboot-1.05-eabi-fixes.patch

@@ -1,43 +0,0 @@
-Get at91dataflashboot to build with EABI toolchains, by providing the
-__aeabi_uidiv and __aeabi_uidivmod symbols. The code is based on
-U-Boot's code.
-
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
----
- _udivsi3.S |   14 ++++++++++++++
- 1 file changed, 14 insertions(+)
-
-Index: DataflashBoot-1.05/_udivsi3.S
-===================================================================
---- DataflashBoot-1.05.orig/_udivsi3.S
-+++ DataflashBoot-1.05/_udivsi3.S
-@@ -12,8 +12,11 @@
- 	.text
- 	.globl	 __udivsi3
- 	.type  __udivsi3       ,function
-+        .globl  __aeabi_uidiv
-+        .type   __aeabi_uidiv ,function
- 	.align	0
-  __udivsi3      :
-+ __aeabi_uidiv:
- 	cmp	divisor, #0
- 	beq	Ldiv0
- 	mov	curbit, #1
-@@ -68,6 +71,17 @@
- 	mov	r0, #0			@ about as wrong as it could be
- 	ldmia	sp!, {pc}
- 	.size  __udivsi3       , . -  __udivsi3
-+
-+.globl __aeabi_uidivmod
-+__aeabi_uidivmod:
-+
-+        stmfd   sp!, {r0, r1, ip, lr}
-+        bl      __aeabi_uidiv
-+        ldmfd   sp!, {r1, r2, ip, lr}
-+        mul     r3, r0, r2
-+        sub     r1, r1, r3
-+        mov     pc, lr
-+
- /* # 235 "libgcc1.S" */
- /* # 320 "libgcc1.S" */
- /* # 421 "libgcc1.S" */