Commit ba92d6ef68 made hard float the
default when Cortex-A8 and Cortex-A9. The problem it was trying to fix
is that the newer Linaro toolchains (2012.05 and 2012.06) are
hard-float, so the default selection of soft-float enabled on ARM
doesn't work for those toolchains.
Unfortunately, not selecting soft-float causes problems with
the Crosstool-NG backend at the moment.
As an intermediate solution, make the soft float option disappear when
using external toolchain: the toolchain will decide by itself whether
to generate hard float or soft float code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds support for the ARM-only appended device tree
mechanism present in the kernel.
This option allows to add at the end of the kernel image the
device tree blob so that we can still boot device tree enabled
kernels with old bootloaders.
This patch also adds the needed logic to genereate such an image
when building zImages or uImages, also adding the necessary parts
to rebuild the uImage.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch introduces the BR2_LINUX_KERNEL_UBOOT_IMAGE boolean to
factorize more code that will be shared in the next patches that
introduces other uImage-like targets.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch introduces some support for device tree-enabled kernels.
It replaces the former BR2_LINUX_KERNEL_DTS_FILE option that was
microblaze-only, that was quite limited. This option was quite
limited, first obviously because it was restricted to microblaze,
but also because it targetted only external device tree source files,
and allowed only to build simpleImages using the custom image name
mechanism.
This patch adds a much more generic one, that can work on basically
every architecture that supports device tree. It allows to build
both device tree source file that comes with the kernel source or to
set the path to the device tree file to use so that one can use a
custom device tree.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that most packages have been converted over to package
infrastructures, keep only one column to show the package
infrastructures.
A new column, showing of the package has license information, has been
added. This will help in increasing the number of packages having
license metadata.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of having two separate list of choices for select the target
architecture variant for i386 and x86_64, with many CPU choices
duplicated (because all modern x86 CPUs can be both used as i386 or
x86_64), merge them into a single list. In the x86_64 case, all the
x86 CPUs that do not support the 64 bits instruction set are hidden.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[thomas.petazzoni@free-electrons.com:
- add dependencies on the supported architectures to avoid build
failures on ARM and other unsupported arches
- add a patch that removes an useless warning about the kernel
version. This patch is present upstream. However since it modifies
configure.ac, we need to autoreconf the package.]
Signed-off-by: Will Newton <will.newton@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since we have now two uncompatible init systems, and we want only one of
them at the same time in use in the rootfs, we need to select a
particular init system. This patch also adds $(PKG)_INSTALL_INIT_SYSTEMD
and $(PKG)_INSTALL_INIT_SYSV hooks that are called when the matching
init systems are selected to install properly the init scripts of the
package.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libusb needs thread support, and so do other packages that depend on it.
[thomas.petazzoni@free-electrons.com: adds threads dependency to
libnfc-llp, which selects libnfc.]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
udev rules are not processed for kernel events that occur before
the udev daemon is started. Call udevadm trigger to replay these
missed events.
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Build less after busybox if it's enabled, since we prefer the full-blown
version over the light one if it's enabled (and busybox would overwrite
the link when built afterwards).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that ncurses has been bumped to 5.9, it installs .pc files for
pkg-config, which allows gpsd to find it properly without the need to
specify a custom location for ncurses5-config.
Since gpsd now uses pkg-config to find the ncurses library, we also
add host-pkg-config in the dependencies.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bumping to 5.9 has two nice side-effects:
* It builds fine on noMMU architectures such as Blackfin, which will
fix build failures like
http://autobuild.buildroot.org/results/cf3e6a95c82b60d63da041293db576a8f21f9136/build-end.log.
* It installs a pkg-config file, which will allow gpsd to find
ncurses properly, without the need to use ncurses5-config, which
means we can get rid of one of our gpsd patches. Thanks to Mike
Frysinger for pointing the new --enable-pc-files option.
After this bump, I build tested a large number of the ncurses reverse
dependencies we have in Buildroot, and they all built fine.
Thanks to Gustavo Zacarias for the investigation on why ncurses 5.9
why segfaulting: it turned out to be caused by the
--enable-broken-linker configure option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There was a typo in the name of the variable to register the hook,
which prevent the hook from actually being called.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The BR2_mmix and BR2_arm_dunno configuration options do not exist, so
there is no chance for these values to be useful in any way.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Qt configuration and installation process is a bit strange, and it
leads the .pc files to contain absolute paths to the staging
directory, while it should only contains paths relative to the staging
directory, because pkg-config already adds the path of the sysroot
automatically to the headers and libraries locations.
This allows the 'pkg-config --cflags' results for Qt libraries to be
correct.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Python support is not cross-compile friendly (uses host compiler,
installs in wrong location, etc.) and nobody needs it at the moment,
so leave that to the first person who will need Python support for
gpsd.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
prefix should always be /usr, and destdir must be passed as DESTDIR,
and in the environment, not as a scons argument. Finally, we pass the
sysroot= argument to scons so that it doesn't add -L/usr/lib
parameters when compiling.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes the following build issue with gcc 4.6:
LINK Xfbdev
.../host/opt/ext-toolchain/bin/../lib/gcc/arm-none-linux-gnueabi/4.6.1/../../../../arm-none-linux-gnueabi/bin/ld: ../../../os/.libs/libos.a(backtrace.o): undefined reference to symbol 'dladdr@@GLIBC_2.4'
.../host/opt/ext-toolchain/bin/../lib/gcc/arm-none-linux-gnueabi/4.6.1/../../../../arm-none-linux-gnueabi/bin/ld: note: 'dladdr@@GLIBC_2.4' is defined in DSO .../host/usr/arm-unknown-linux-gnueabi/sysroot/lib/libdl.so.2 so try adding it to the linker command line
.../host/usr/arm-unknown-linux-gnueabi/sysroot/lib/libdl.so.2: could not read symbols: Invalid operation
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It currently fails to build with:
libgpsd_core.c: In function 'gpsd_poll':
libgpsd_core.c:881: error: 'const struct gps_type_t' has no member named 'min_cycle'
libgpsd_core.c:884: error: 'const struct gps_type_t' has no member named 'min_cycle'
and is probably not a very important feature for normal users of gpsd.
The build problem has been reported to the gpsd-users mailing list.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 9ba9bfb9a0 inverted the logic to
define $(2)_SUBDIR, breaking the build of things using the _SUBDIR
feature, like the tcl package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Just like we have AUTOMAKE, AUTOCONF or QT_QMAKE, let the scons
package provide a SCONS variable that points to the scons host binary.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix for CVE-2012-2688 (potential overflow in _php_stream_scandir),
CVE-2012-3365 (SQLite open_basedir bypass) and other misc bugfixes.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
All the defconfig files used by the autobuilders that use
pre-installed external toolchains are making the assumption that the
default for a custom external toolchain is "pre-installed". We keep
this default for now, since changing it breaks the autobuilders.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
HOST_CONFIGURE_OPTS allows to pass the correct CC, CXX, CFLAGS,
CXXFLAGS, etc. For example, it allows the elftosb build process to
properly use ccache when available.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds a new config option BR2_PRIMARY_SITE_ONLY that, when set,
restricts package downloads to the specified BR2_PRIMARY_SITE. If the package
is not present on the primary site, the download fails.
This is useful for project developers who want to ensure that the project can
be built even if the upstream tarball locations disappear.
[thomas.petazzoni@free-electrons.com:
Extend config option help message with more details coming from the
commit log. Added a dependency on the fact that a primary site has
been defined. Without any primary site (the default configuration),
this new option does not make any sense.]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cortex-A8 and Cortex-A9 ARM cores are guaranteed to provide a hardware
floating point unit, so there's no reason to default to software
floating point for them.
More importantly, the newest Linaro toolchains are hard float
toolchains, so basically an user choosing those toolchains and leaving
the default option of software float would run in compilation issues.
So let's make hard float the default for Cortex-A8 and Cortex-A9.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check_glibc function verifies that the C library of the external
toolchain is glibc. To do so, it verified that a file matching
ld-linux*.so.* or ld.so.* was found in the lib/ directory of the
toolchain's sysroot. However, with the Linaro 2012.05 toolchain, the
lib/ directory contains two links named ld-linux-armhf.so.3 and
ld-linux.so.3, which means that the first ld-linux*.so.* wildcard
expression expands to two files, which generates a syntax error for
the "test" program. We replace that with a more elaborate find+wc
combination to determine whether at least one matching file is
present.
The check_arm_abi function verifies the ABI of an ARM toolchain. For
EABI, it tested that the target name ends with eabi. However, with
Linaro 2012.05, the tuple is now arm-linux-gnueabihf (for hard float),
so we have to adjust the logic to accept this additional "hf"
specification in the tuple.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds the possibility to download a custom external
toolchain, in addition to the existing support of preinstalled custom
external toolchains.
With the modified configuration, the user is presented with the
following options:
- Toolchain type: Buildroot toolchain | External toolchain | Ct-ng toolchain
In case of External toolchain:
- Toolchain: the CodeSourcery toolchains | Custom toolchain
- Toolchain origin: Toolchain to be downloaded and installed | Pre-installed toolchain
In case of Toolchain to be downloaded, the user is presented with:
- Toolchain URL
In case of Pre-installed toolchain, the users sees:
- Toolchain Path
For CodeSourcery toolchains, the toolchain URL field is not used (the
URLs are directly coded in ext-tool.mk).
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When using one of the package infrastructures, the DOWNLOAD function
uses $(PKG)_SITE_METHOD to determine the appropriate download method,
which is autodetected based on the URI if none was explicitly set.
When the DOWNLOAD function is called directly, for example when
downloading a toolchain, or from a package that does not use one of
the package infrastructures, the SITE_METHOD is not autodetected,
and thus the download defaults to wget.
This patch adds URI scheme detection directly to the DOWNLOAD method,
in case no SITE_METHOD was detected yet.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The localfiles download method uses $($(PKG)_SITE))) and
$($(PKG)_SOURCE) instead of $(1) and $(2). This means that it can only
be used for package downloads (through gentargets, autotargets, ...)
and not for other downloads like external toolchains.
This patch changes localfiles to allow this, just as the wget and scp
download methods already did.
For the version control download methods, nothing changes.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix the indentation of the external toolchain Config file, where tabs
and spaces are mixed as indentation even within the same block.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
MXS platforms (imx23 and imx28) are relying on bootlets as their first
stage bootloaders, that can then either start a regular second stage
bootloader or directly a Linux kernel. However, the Makefile allows
only to build u-boot and linux images at the same time, which is
not very convenient as we will more likely use only one of them,
so we need to duplicate a bit what is already done so that we are able
to choose what we want to generate.
thomas.petazzoni@free-electrons.com:
* Remove incorrect dependency on BR2_PACKAGE_ELFTOSB
* Each board configuration option is for one board, not multiple
boards, so use singular.
* The i.MX28 support is for i.MX28 EVK only, reflect that in the
option prompt and the option name.
* Use 'generic-package' instead of GENTARGETS
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Elftosb is a Freescale toolset to build binary image files (like U-Boot.sb)
to be used with CPUs imx23, imx28, stp37xx
thomas.petazzoni@free-electrons.com:
* Add -m 0755 when installing binaries
* the _CLEAN_CMDS is not supposed to uninstall things from the
HOST_DIR.
* Use 'host-generic-package' instead of 'GENTARGETS,host'
Signed-off-by: Eric Jarrige <eric.jarrige@armadeus.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[thomas.petazzoni@free-electrons.com:
slightly adjust the installation process to just do a loop of calls
to $(INSTALL).]
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[thomas.petazzoni@free-electrons.com:
add patch that creates a standard setup.py file. This allows the
.pyc files to be generated at build time, and installed into the
target. This is important because by default, Buildroot removes all
.py files from the target, to keep only the .pyc files. The
python-nfc.mk file was changed to use this setup.py standard build
process.]
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Installation of host-lua was failing because it was the first package
to be built, and $(HOST_DIR)/usr/lib didn't exist. Therefore, use
install -D everywhere so that intermediate directories are created as
needed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
gcc 4.6 has become more sensitive about option ordering, especially
libraries. It requires the -l flags to be placed after the object
files that need that library. See for example
http://nick.zoic.org/art/etc/gcc-linker-libs.html. We had -llua at the
beginning of the link command line, causing build issues (here on gcc
4.6 with host-lua).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit ad6af5819f removed the
HOST_LUA_DEPENDENCIES assignement to the empty variable, so from that
commit, the dependencies of host-lua are automatically computed from
the dependencies of lua. Since lua can depend on readline and ncurses,
it means that host-lua can depend on host-readline and host-ncurses,
and the host-readline package does not exist in Buildroot. Since there
is no reason to build host-lua with readline/ncurses support, just
re-add the HOST_LUA_DEPENDENCIES variable.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Francois Perrad <fperrad@gmail.com>
This patch adds the libnfc-llcp package.
This package requires a minium libnfc version of 1.6. A separate patch has
been submitted to bump the libnfc version; that patch should be regarded as
a prerequisite for the present patch.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch bumps the libfreefare package from version 0.3.2 to version 0.3.4.
Version 0.3.4 requires a minium libnfc version of 1.6. A separate patch has
been submitted to bump the libnfc version; that patch should be regarded as
a prerequisite for the present patch.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
bwm-ng can monitor not only network bandwidth but also disk-io
bandwidth, so it is more appropriate to put bwm-ng into System tools.
Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As sam-ba is delivered as a binary for x86
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This will allow to install binary package only if they are supported by the
host. As example Atmel SAM-BA (x86 only).
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The libnfc package is currently at version 1.5.1 in Buildroot. This patch
bumps the version to a recent svn revision, for the following reasons.
* Version 1.5.1 is marked as "unstable" on the libnfc download site.
* The nfc-tools project at
http://code.google.com/p/nfc-tools/
includes a library that extends libnfc with LLCP functionality.
Unfortunately, to build this requires a libnfc version no lower than 1.6.
The version 1.6.0-rc1 Release Candidate does not build; svn commits to fix
the build problems have not yet been back-ported into a Release Candidate.
* The libfreefare package is currently at version 0.3.2 in Buildroot. To bump
this to the most recent version (0.3.4) also requires a libnfc version no
lower than 1.6.
I suggest that this patch be regarded as a temporary fix, pending the release
of libnfc 1.6, which will allow other dependent packages to be progressed in
the interim.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also, as the kernel.org archives are back up, use them as official site
again.
[thomas.petazzoni@free-electrons.com: use BR2_KERNEL_MIRROR]
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
On some architectures (found on x86_64, but probably others too),
libnss builds with -m32 unless it is configured for 64-bit build. So
force 64-bit build on 64-bit architectures.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
On some architectures (found on x86_64, but probably others too),
libnspr builds with -m32 unless it is configured for 64-bit build. So
force 64-bit build on 64-bit architectures.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With the introduction of a specific macro for host targets, it was decided
to also make the names of the macros more intuitive: generic-package,
autotools-package and cmake-package.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Create host-generic-package, host-autotools-package and
host-cmake-package macros. Such a macro is more intuitive to use than
the $(call ...,host) construct. Also it speeds things up by having
one less $(call ...) evaluation.
Also includes documentation update, but not for buildroot.html.
This brings the time for 'make -qp' (which is used by bash-completion)
down from 1.85s to 1.35s on my laptop.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The target package was only present because at the time 'nasm' was
packaged, there was a bug in the package infrastructure that prevented
a package from having a host only variant. This has been fixed since
then, so we can get rid of the useless dummy target package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Users keep falling on this documentation, which is no longer kept
up-to-date with the developments. Get rid of it now.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This allows to automatically collect material that may be needed to comply with
the license of packages that Buildroot prepares for the target device.
The core of the implementation is made by the following parts:
- in package/pkg-utils.mk some helper functions are defined for common actions
such as generating a warning, producing info about a package etc;
- in package/pkg-gentargets.mk, within the GENTARGETS framework, a new
<PKG>-legal-info target produces all the info for a given package;
- Makefile implements the top-level targets:
- legal-info-prepare creates the output directory and produces legal info
about Buildroot itself and the toolchain, which mostly means just warning
the user that this is not implemented;
- legal-info, the only target that is supposed to be used directly, depends
on all of the above and finishes things by producing the README files from
the various pieces.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update Config.in and .mk according to the new features.
Remove the patch handling build with uclibc without long double support,
which seems not necessary anymore.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Selecting the target subarchitecture variant automatically selects the
appropriated set of features.
[thomas.petazzoni@free-electrons.com:
removed depends on inside hidden options, not needed.
removed SSE41/SSE42 options, not used.]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When HOST_XXX_DEPENDENCIES are derived automatically from
XXX_DEPENDENCIES, a self-dependency is created if host-xxx is a dependency
of xxx. This was the case for miniperl.
Filter out the self-dependency.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
MIPS EABI is a bare-metal ABI so remove it.
Also fix uClibc to really work with N32 ABI, which used the EABI knob
previously.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The help text of BR2_LINUX_KERNEL_DEFCONFIG is confusing: it seems to
point to the defconfigs in the buildroot tree. So explicitly refer to
the kernel tree in the help text.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[thomas.petazzoni@free-electrons.com: rewrote the patch, which was
corrupted in the original submission. Used quilt to refresh the Lua
patches, so that the version numbers are no longer present in the file
names]
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Configuring libmad with --enable-speed compromises accuracy and can cause audio
clipping in some cases (heard on ARM platform with some loud MP3s), so give
users the choice of MAD optimizations.
The default config corresponds to the default behavior of libmad's configure.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
The -fPIC breaks the purgatory of kexec (= the code that passes command-line
arguments to the kernel): kexec doesn't know how to handle the GOT and PLT
relocation entries.
There is also no reason at all to pass -fPIC. Shared libraries that require
it will add it to their local Makefiles, and normal executables have no
business with -fPIC (plus it adds overhead...).
The -fPIC was added by Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
in commit 8027784c. That commit adds sysroot parameters to CFLAGS.
There is no explanation why -fPIC is also added for x86_64.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Because beecrypt needs threads rpm does too since it's a mandatory
dependency.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Having DESTDIR defined will confuse the build of certain packages, so
we ensure that it is undefined from the environment when Buildroot
starts.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We should instead simply unset it at runtime, like we do for
PKG_CONFIG_PATH.
This reverts commit 9910eba33a.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The current structure of the LIBFOO_SITE_METHOD paragraph would make
it difficult to add documentation for the "file" and "local" methods.
There are enough possible values for LIBFOO_SITE_METHOD that
describing them in a sub-list seems to work well, which makes it
easier to add documentation for new methods.
Signed-off-by: Nathan Lynch <ntl@pobox.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Buildroot supports the use of local filesystem paths in LIBFOO_SITE
since the 2011.11 release, but this is not documented in the manual.
Fix this and slightly reword the surrounding doucmentation
accordingly.
Signed-off-by: Nathan Lynch <ntl@pobox.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If PKG_CONFIG_PATH is set in the environment, it allows pkg-config to
look for libraries outside of the buildroot tree. This is a problem
both for host and target builds. To avoid it, globally set an empty
PKG_CONFIG_PATH in the environment.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When a wget download is interrupted, the downloaded file is still created.
It will therefore not be re-downloaded in the next build, and the
extraction will fail.
To avoid this, download to a temporary file first and rename when the
download is successful.
The existing mechanism doesn't work for interrupted downloads because the
whole sub-shell is interrupted, so the rm-part never gets executed.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The Mercurial branch may change, which leads to non-reproducible builds.
So download a released version instead.
Also add configure option for e1000e.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
canusb support in libpcap uses pthreads but the configure script doesn't
account for -lpthread usage so it doesn't get added into LIBS which in
turn doesn't add the appropiate entry in pcap-config, causing build
failures for programs that link to libpcap that don't use pthreads
themselves (for example tcpdump).
Also add the conditional dependency on BR2_PACKAGE_LIBUSB for canusb.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As pointed out on IRC, the static tools causes problems on distributions
without glibc-static, and we don't need them - So just disable them like
we do for the target build.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: build using make instead of scons, fixup whitespace, target install]
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When BR2_JLEVEL is 0, set PARALLEL_JOBS to double the number of CPUs
detected. This allows one to more or less fully utilize the host
system without manually tuning the configuration.
Also make 0 the default value for BR2_JLEVEL.
Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
BR2_JLEVEL currently is expanded directly in $(MAKE), and used in
invocations of other build software (e.g. ct-ng). However, we are
going to allow "0" to be a meaningful value for BR2_JLEVEL, which
won't work for these uses. Given that it is not permissible to modify
BR2_-prefixed variables in Makefiles, we need an intermediate
variable.
Define PARALLEL_JOBS to $(BR2_JLEVEL), and use the former in MAKE's
definition. Uses of BR2_JLEVEL throughout the rest of the tree to be
adjusted similarly in follow-up patches.
Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
GStreamer requires xorg support in order for the ximagesink and xvimagesink
plugins to be available.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The original 'source-check' target first selects all packages, and then checks
whether the package tarballs can be found. This is useful for Buildroot
maintainers, but less useful for developers working on a specific project. The
latter only care about the packages used in that project.
This patch removes the allyesconfig dependency to source-check so that only
selected packages are checked. The original behavior is moved to a new target
'source-check-all'.
[Peter: removed source-check-all, people can just make allyesconfig before]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Sometimes it may be desirable to keep debug symbols for some binaries and
libraries on the target. This commit introduces the config option
BR2_STRIP_EXCLUDE_FILES, which is interpreted as a list of such binaries
and libraries, and the option BR2_STRIP_EXCLUDE_DIRS, which indicates
directories excluded from stripping entirely.
These exclusions are passed to the find command in the target-finalize step.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch adds a few utility functions to pkg-utils.mk.
Functions finddirclauses and findfileclauses help in building a find command
that skips a set of directories and performs operations on a set of files.
This pattern can for example be used to keep certain files or directories from
being stripped, or to remove certain files from a package installation.
The notfirstword function is the inverse of the 'firstword' function in make:
it returns all but the first word.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
inadyn is a DynamicDNS client/updater which works with dyndns.com, noip.com
and many other DDNS providers. It is minimal in footprint and requirements,
supports IP caching, multiple providers, multiple domain names, and
a variety of other situations.
[Peter: fixup whitespace / trailing spaces]
Signed-off-by: Dave Purdy <david.c.purdy@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
xinetd's configure does not set up an AR variable, and there
are no libtool files to autoreconfigure. So instead, lets
pass in AR during the build.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Expand the openWRT patch to fix xinetd's "uninstall" target,
so that buildroot's "xinetd-clean" removes the correct files.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of providing two variables, make GNU_TARGET_NAME give the real
target name, and remove REAL_GNU_TARGET_NAME altogether.
Signed-off-by: Richard Braun <rbraun@sceen.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Running sudo on the target fails with the following errors.
sudo: /usr/libexec/sudoers.so: No such file or directory
sudo: fatal error, unable to load plugins
The problem is that the installation of the sudo package is broken. This patch
replaces the hand-crafted install rule with the default AUTOTARGETS install.
Unfortunately, the default install fails because it includes a step that
invokes the cross-compiled visudo binary. A patch is provided here to disable
this visudo invocation, which is for sanity checking only. This local patch is
a backport of upstream commit 8209:0c4e3f68b2f5; the real fix will be in the
1.8.6 release of sudo.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The upstream URL for Buildroot packages is usually visible in the Config.in
file, not in comments in the Makefile.
Moreover, this URL does not point to the correct upstream project.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Note that liburcu-0.6.7-missing-gnu-source.patch has been merged upstream.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
delete mode 100644 package/liburcu/liburcu-0.6.7-missing-gnu-source.patch
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump php to version 5.3.14 to fix CVE-2012-2143 and other assorted bugs.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If openssl is not selected, configuration fails for the libfreefare package
as follows.
configure: error: Cannot find libcrypto.
This patch adds the missing dependency on openssl.
[Peter: use select instead of depends on]
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This removes fbv's compulsory dependency on either libpng and/or libjpeg and/or libungif.
The user can choose which compressed image format's fbv should support.
By default PNG, JPEG and GIF are selected.
Note that BMP format support will still always be included.
[Peter: Drop (unneeded) png specific libs]
Signed-off-by: Arn R <arnerro@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump bind to version 9.6-ESV-R7-P1.
Fixes CVE-2012-667.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fix bug #5276 by disabling IPv6 when the toolchain lacks it.
It builds fine even if it's enabled but it probably doesn't work fine.
Also bump to version 8.4:
* MaxServerLoad option added.
* Bugfix: invalid reverse proxy request when URL parameters are present.
* PolarSSL updated to version 1.1.4.
* Small bugfixes and improvements.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Configuration fails for the monit package, with the following error.
checking for SSL library directory... Not found
Couldn't find your SSL library files.
Use --with-ssl-lib-dir option to fix this problem or disable the
SSL support with --without-ssl
Tweak the monit configuration command line so that openssl is found.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bugfix release:
* Fix: Work around failure of ETHTOOL_GSSET_INFO for unprivileged
users (-k option)
* Fix: Report any unexpected error code from ETHTOOL_GSSET_INFO
(-k and -K options)
* Doc: Fix the date of the man page to match the last update
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Correctly handle empty SSL/TLS packets (Found by James Yonan)
* Fixed potential heap corruption in x509_name allocation
* Fixed single RSA test that failed on Big Endian systems
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In fact, not only qt can install stuff in $(STAGING_DIR)/usr/mkspecs,
but also libraries that wish to integrate with qmake, such as
qwt. However, qmake and al. will look inside $(HOST_DIR)/usr/mkspecs,
so the easiest solution is to have a symbolic link between the two
directories, instead of copying things around.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
While most packages that rely on libcurl use pkg-config, a few
packages (such as libxmlrpc) still use curl-config. So we need to fix
up the prefix locations in the curl-config script installed in
STAGING_DIR.
[Peter: only fixup if prefix=/usr]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fix the plugin search path by passing a --prefix to configure.
DESTDIR is used in the source code for the search path of plugins
(DESTDIR/lib/pppd/VERSION).
Since DESTDIR defaults to /usr/local we get the search path wrong so the
'plugin' directive requires a full pathspec to the plugin rather than
the .so name, which isn't nice or portable.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The bind plugin requires libcurl and libxml2.
These are properly selected but never added to COLLECTD_DEPENDENCIES.
Fix that.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fix WDDX extension build failure.
The documentation and source are conflicting about this, in theory
libexpat support is deprecated and libxml2 can replace it, but it seems
not so for WDDX, so pull in expat for it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The Zebra daemon now requires IPv6 support so disable it for non-IPv6
toolchains and add a comment mentioning it.
The BABEL protocol/daemon also requires IPv6 so just enable it when it's
available.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
PHP requires that net-snmp be built with the ability to load MIB code,
so force it on when the extension is enabled.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The optional webrtc echo canceller is written in C++, causing auto* to want
to link module-echo-cancel.so with CXX even if webrtc ISN'T used.
If we don't have C++ support enabled in BR, CXX will point to /bin/false,
which makes configure think we aren't able to create C++ .so files
(arguable true), breaking the build when it tries to install the .so
workaround it by patching up the libtool invocations to use C mode instead.
Fixes http://autobuild.buildroot.net/results/114e5bf0086f2394b36f17a70cb54b357a72413c
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The explicit gnutls prefix in combination with the libc.so linker script
and non-default sysroot seems to confuse external toolchains, causing
configure to error out. Workaround it by not using an explicit libgcrypt
prefix as it is installed in the sysroot anyway.
Fixes http://autobuild.buildroot.net/results/3b3901bea904bf32bccbd3e9a4274d604776cb98
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It doesn't really need C++ support on Linux, but the configure script
checks for it (and fails if not available), and the package is not easy
to autoreconf as there's C++ source files for Android/Windows, causing
automake to fail if AC_PROG_CXX isn't set.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Rather than the outdated buildroot.html. The asciidoc documentation is
still not autogenerated from git, instead a static snapshot is made per
release (like we did for /downloads/buildroot.html).
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump nfs-utils to version 1.2.6
Portmap or rpcbind (which we don't have) is required so select it.
Remove nfsiostat if there's no target python.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: add upstream URL, fix dep, drop explicit bluetooth option, no AUTORECONF]
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump hiawatha to version 8.3 - adds reverse proxy functionality.
Also define WORK_DIR to /var/lib/hiawatha instead of the uncommon
/usr/var/lib/hiawatha - missed it in the last path fixes.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This problem was already fixed by Markos Chandras for wget, but not for scp.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Enable IEEE 802.11u (interworking).
Also enable new supported EAP methods.
Switch from echo to sed where possible for a cleaner .config output
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Enable IEEE 802.11u (interworking).
Also enable new supported EAP methods.
Switch from echo to sed where possible for a cleaner .config output
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The patch was added after the multimedia category reorganization so it
became unreachable.
Move it to the final libmpeg2 package directory.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump php to version 5.3.13 to solve multiple CVEs.
The 5.2 series is no longer maintained.
The PCRE and SPL extensions are no longer optional.
Reflection is no longer optional either.
Ncurses was spun out to PECL.
Add a ton of new extensions and give more granular options on others
(like the libxml2-based ones).
The FastCGI option no longer exists, it's always on as long as CGI is.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
remove e2fsprogs-add-missing-dep-of-tst_uuid-o.patch as
the changes are already upstream
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
uClibc 0.9.33+ has resolver support, so we don't need to depend on a
snapshot uClibc version any more. We're also using 0.9.33 for ctng, so
we can just disallow the old internal uClibc versions instead.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If the buildroot infrastructure finds a patch file that contains the
$PKG-$VERSION tuple in the filename, it will only apply this kind of
patches, ignoring the rest of the patches in the package directory.
As a result of which, the gpsd-fix-libgpsmm.patch did not apply
because the gpsd-2.95-navcom.patch satisfies the $PKG-$VERSION convention.
The buildroot policy (as discussed during the Buildroot Developer meeting)
is to remove the package version from the patch filename.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Block unsupported processors according to gcc version.
Also remove the comments since we now hide them according to this.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump default snapshot gcc version to 4.8-20120429 so that it is newer
than our latest supported version (4.7.0 release).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump samba to version 3.6.5 with SMB2 protocol support.
Use shared popt rather than the builtin - it saves some space if you've
already got it on your target.
mount.cifs & umount.cifs have been unbundled so remove the option -
users must use cifs-tools for that.
Add recommended enhancement from bug #807 (make iconv support optional).
Optional smbd was already commited some time ago.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump to version 8.2.
Define CONFIG_DIR=/etc/hiawatha, LOG_DIR=/var/log, PID_DIR=/var/run and
WEBROOT_DIR=/var/www/hiawatha which are the same as the defaults but
without the /usr prefix.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When vala is built inside a Git repository with uncommitted changes, the
valac version number has -dirty appended. This creates problems for
packages (e.g. Midori) which require a valac version number without
the -dirty suffix.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The existing ccache infrastructure sets the cache directory hardcoded in the
ccache binary. As this directory was set to ~/.buildroot-ccache, the cache
is not necessarily local (e.g. in corporate environments the home directories
may be mounted over NFS.)
Previous versions of buildroot did allow to set the cache directory, but this
was also hardcoded (so you had to rebuild ccache to change it), plus that
support was removed.
See http://lists.busybox.net/pipermail/buildroot/2011-July/044511.html for
a discussion on this.
This patch modifies ccache to respect a new shell variable (exported from
the Makefile, based on a configuration option) instead of CCACHE_DIR.
The name CCACHE_DIR itself is already used by autotargets for the ccache
package.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The documentation generation process requires a special yold2man
program, for which we don't have a package in Buildroot. Since we
generally don't care much about documentation of packages, just adjust
the package Makefile.in to not build/install its documentation.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In kernel >= 3.3, the ext2_fs.h can no longer be imported from
userspace. This has been fixed for internal toolchains by adding a
patch to kernel headers, but this doesn't work with toolchains
generated by Crosstool-NG, or potentially upcoming external
toolchains.
socat in fact has a test in its configure.in, but the configure was
generated too long ago, and the generated test relies on the
preprocessor result and not the compiler result (but warns that in the
future, the compiler result will be used instead of the preprocessor
result).
So, by running autoconf on this package, we fix the problem: it
properly checks whether ext2_fs is usable or not, and acts
accordingly. Of course, it means that with recent versions of the
kernel, ext2-specific features of socat are unavailable, and we'll
have to wait for the socat developers to adapt their code so that they
use the e2fsprogs headers.
We also bump the version, since a new minor version fixing a security
problem has been released.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libnl support is enabled by default since version 1.0, so disable it
to avoid build breakage when there's no libnl.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Decimal floats were introduced circa gcc-4.2 or -4.3, and requires
the floating-point environement fenv.h in the C library.
The uClibc .config file used by crosstool-NG to build uClibc is the
same as used by the internal buildroot mechanism, and explcitly
disables fenv support.
The quick workaround is to simply disable decimal floats in all
crosstool-NG config files.
In the long run, it might be better to check this situation, and/or
add code and/or options in crosstool-NG to handle this (but it is
much more involved, and this workaround is sane).
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
SUPPORT_LIB_DIR would get resolved to the main buildroot directory for
external toolchains without C++ support, as:
- gcc -print-file-name=<nonexisting-file> returns <nonexisting-file>
- readlink -f <nonexisting-file> returns $PWD/<nonexisting-file>
So fix it by ensuring output of gcc -print-file-name actually exists
before using it.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump to version 3.2.9 and add an option to install the tools.
Since they're not usually required we default to N to reduce size.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The heirloom-mailx Makefile runs makeconfig if this has not been done
before. In a parallel build, this means makeconfig may be run several
times in parallel because there are two targets that depend on makeconfig.
See for instance
http://autobuild.buildroot.net/results/d24854be69961f71db189f9d804d4bd2cfa078da
To avoid this, run makeconfig in the configure step, which is not parallel.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Update the qemu samples configs that used kernel 3.3.4 to 3.3.5
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Beautify and lock down kernel version to avoid future issues.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Beautify and lock down kernel version to avoid future issues.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Update the version of crosstool-Ng used, bump to 1.15.2.
Also, update the bundled config files to match the new version.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit 0729b544b3 (Improve external toolchain logic to support IA32
Sourcery CodeBench toolchain) and e1f0804cc (external-toolchain: add
support for recent Linaro toolchains) changed the interface of
copy_toolchain_lib_root, but ctng wasn't updated so libraries weren't
copied to the target.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The FLAT (Separate Data) and FLAT Shared ABIs are rarely used, and the
FLAT Shared ABI requires the user to manually assign an unique ID to
each shared library, which we will never support in
Buildroot. Therefore, restrict ourselves to FLAT and FDPIC.
In addition to this, ensure that when FLAT is selected, only static
libraries are produced, because this is what FLAT supports. It will
fix problems such as
http://autobuild.buildroot.org/results/2d756d75162e8737e99df8189bde93ed1a09feef/build-end.log.
Moreover, we make FDPIC the default ABI, since if someone is using
Buildroot, it's most likely to generate a fairly elaborate embedded
Linux system, on which shared libraries are probably useful.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In order to use locale support on a Linux system, you need locale data
to be present:
* on a (e)glibc based system, this data is typically in the
/usr/lib/locale/locale-archive file, which can be created and
extended using the localedef program
* on an uClibc based system, the set of supported locales is defined
at build time by an uClibc configuration option.
This patch implements generating locale data for the following cases:
* Internal toolchain
* External toolchain based on (e)glibc. uClibc external toolchains
are not supported, because with uClibc, the set of supported
locales is defined at build time. CodeSourcery and Linaro
toolchains have been tested, Crosstool-NG toolchains are believed
to work properly as well.
* Toolchains built using the Crosstool-NG backend, but only (e)glibc
toolchains.
This feature was runtime tested with internal uClibc toolchain,
CodeSourcery ARM toolchain and Linaro ARM toolchain, thanks to a
simple C program that shows the data and a gettext translated message.
Note that this option differs from the "purge locales" option, which
is responsible for removing translation files and other locale stuff
installed by packages. At some point in the future, we may want to
clarify the respective roles of those options.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This host only package allows to build the localedef program, which is
needed to generate locale data for (e)glibc-based systems. The source
code has been extracted from the eglibc sources and put inside a small
and nice tarball by the PTXdist developers, which makes it easy and
convenient to build for the host.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#5198
Enable terminfo support as reported on bug #5198
Also install screenrc if it's not already present in the target.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add new powerpc-mpc8544ds sample qemu config.
Useful for SPE ABI testing.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This configuration provides a basic setup for using Buildroot
to create all of the images needed for a BeagleBone.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When the crosstool-ng backend is used, host-gawk is built as a
dependency of the crosstool-ng package, and therefore an host 'gawk'
binary is installed in $(HOST_DIR).
When the target gdb package is also selected, this unfortunately leads
to a build failure, as reported on
http://buildroot.humanoidz.org/results/f19c0499d08212d8b5100fa9434e1197092957db/build-end.log.
The problem is that the ./configure of gdb detects gawk in the PATH,
but at compile time, it fails to find gawk. This is due to the fact
that the gdb compilation process is started without the correct path.
This patch fixes this by passing $(TARGET_MAKE_ENV) in the environment
of the gdb compilation process.
A better fix would be to switch gdb to the AUTOTARGETS infrastructure
in the future.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Starting from 2012.03, the Linaro toolchains have separated the GCC
support libraries (libstdc++, libgcc_s) from the sysroot itself. So we
no longer have the case where all libraries are inside the sysroot, as
we had for all the previously supported toolchains.
Therefore, we add some logic to detect if such a separate directory is
used for GCC support libraries, and if it's the case, we make sure
that we take into account this directory when creating our own
sysroot, and when copying libraries to the target filesystem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump to dnsmasq version 2.61.
Add new conntrack functionality: makes for more sturdy firewall setups.
Make IDN build without libintl, it's no longer needed and problematic
for other packages when there's no NLS support enabled.
Locale support does require IDN so just build it when IDN=y.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This is a default configuration for Panda and PandaES, tested on both
platforms.
DEVTMPFS is enabled, to use static dev configuration one would need
to update the generic dev table for ttyO driver.
Panda is well supported in mainline kernel with omap2plus_defconfig,
so this should be safe.
U-boot SPL support is enabled by default as x-loader is now
deprecated.
With OMAP platforms u-boot,img format is prefered now, so it's enabled
by default as well. Also, on PandaBoard, the name of SPL target file
is MLO.
Signed-off-by: Nicolas Dechesne <n-dechesne@ti.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
For some platforms like OMAP, a new binary format is now being used
for u-boot: u-boot.img. It is basically u-boot.bin which has been
processed with mkimage.
Signed-off-by: Nicolas Dechesne <n-dechesne@ti.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
SPL is a first stage bootloader. On pandaboard it supercedes x-loader,
and should now be used.
This patch ensures that either SPL or xloader can be selected.
A config variable has been added for the name of the SPL binary generated
during u-boot build. For most platform it is u-boot-spl.bin but not always.
It is MLO on OMAP for example.
Signed-off-by: Nicolas Dechesne <n-dechesne@ti.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Frank Hunleth <fhunleth@troodon-software.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Move audio libraries out of the Audio and Video category into the
Libraries/Audio one.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Move multimedia libraries ouf of the Audio and Video category into the
Libraries/Multimedia one.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
So that this works:
% make defconfig BR2_DEFCONFIG=~/buildroot-defconfig
Right now we have to do:
% cp ~/buildroot-defconfig configs/buildroot_defconfig
% make buildroot_defconfig
That would dirty the buildroot tree and requires it to be writable.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump to use kernel version 3.2.16
Still keep sh4-r2d qemu sample config on 3.2 series since the sh-sci
driver from 3.3 uses unimplemented functionality (as of qemu 1.0.1)
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since the kernel.org security problem and reinstallation, libaio is no
longer available from this site. Use snapshot.debian.net as an
alternative source.
[Peter: Add spaces around '=' while we're at it]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Remove builtin OCF support from the openssl package into a new package.
Even though ocf support is just a header file we'd rather have it in a
separate package because of unrelated version bumps and to fetch it from
source.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add the ocf-linux package and linux kernel extension.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch improves two things:
* It makes sure that the linux-menuconfig and al. commands can be
executed even if the user hasn't executed 'make' before. Until now,
the commands were depending on the .configured stamp, which is not
sufficient since the linux package has been converted to the
GENTARGETS infrastructure. Instead, depend on the linux-configure
phony target.
* It makes sure that those commands are not available when the Linux
package is not selected, just like we do for Barebox.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The bcopy patch just changes bcopy for memmove which is incorrect since
bcopy and memmove use reversed src and dest parameters between them.
Oops!
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
gcc 4.3/4.4/4.5 accept the following arguments for --with-abi=
"" | 32 | o64 | n32 | 64 | eabi)
So, the "n64" argument coming from buildroot should be changed to "64"
so that gcc's ./configure step does not error out.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Enable uClibc 0.9.33.1 for the SH architecture.
Builds and works fine with the qemu sample config.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Enable AI_ADDRCONFIG support in uClibc otherwise we don't get the
ifaddrs.h header installed and thus lack getifaddrs support.
Quite useful for samba for example so we can use interfaces=eth0 statements in
the configuration file rather than klunkier
interfaces=192.168.1.1/255.255.255.0 ones.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Security Fix for RubyGems: SSL server verification failure for remote
repository.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add a configuration menu item to specify a list of lcdproc drivers to
be built. The list defaults to 'all'.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The xf86-input-vmmouse source code fails to compile intentionally on any
architecture but x86/x86_64. The following error is printed when compiling for a
different architecture:
vmmouse_proto.h:62:2: error: #error The vmmouse protocol is only supported on
x86 architectures.
vmmouse_proto.c:117:2: error: #error "VMMouse is only supported on x86 and
x86-64.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump to version 3.3.0
We now need to keep builtin headers since it's using very modern defines
which aren't yet mainstream in glibc or uClibc.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fix uboot-tools build breakage as reported by Peter Korsgaard.
Previously config.h was included in imximage.h but not the fw_env tool.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch add the Netatalk package to Buildroot.
[Peter: fix download URL, force c99 mode, tweak help text]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Target a powerpc 750 rather than the incorrect 440fp to avoid issues and
for correctness.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Busybox 1.20.0 add functionality to execute scripts from if-post-up.d
and if-pre-down.d, so add the missing directories to the device table to
get them created and avoid unnecessary warnings if not.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Option --enable-ipv6 now handled globally in autotargets configure.
Signed-off-by: Vanya Sergeev <vsergeev at gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump from 2012.04 to 2012.04.01
Fixes a nasty bug in the command line processing.
[Peter: keep kconfig name]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump to version 0.9.20.1 to fix CVE-2012-0249, CVE-2012-0250 and
CVE-2012-0255.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since busybox 1.20+ includes a lsof applet make sure lsof gets built
after busybox so that we get the full-blown version if both are enabled.
Also hide the lsof package unless BUSYBOX_SHOW_OTHERS is true.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add version 1.20.0, remove deprecated 1.16.x & 1.17.x versions and mark
1.18.x as deprecated.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The www-data user is defined in fs/skeleton/etc/passwd, with gid 33. But
gid 33 is not present in the group file.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
uClibc got sched_getcpu in 0.9.33, so the compat workaround should only
be used for older uClibc versions.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
IPv6 support needs the TIRPC library, which we don't have in Buildroot, so
forcibly disable IPv6 support.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add an option to install (or not) the berkeleydb binary tools.
The default is no since most of the time/application just need the
library and it helps save some space in the target.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The support for mklibs has been marked broken since more than a year
and nobody cared to bring it up to a working state.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Re-integrate in gcc-uclibc-4.x.mk things from
toolchain/gcc/Makefile.in that were completely gcc-specific. There was
no reason to pull that when building with other backends than the
internal one.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The BR2_CONFIGURE_DEVEL_SYSROOT, BR2_CONFIGURE_STAGING_SYSROOT and
BR2_CONFIGURE_BUILD_TOOLS were used only in a few places, and it is in
fact clearer to just use their value in the various places they are
used.
The ultimate goal is to get rid of the toolchain/Makefile.in file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Added patch to disable buggy_getaddrinfo test during configure when
cross-compiling.
[Peter: Remove --enable-ipv6 which is now handled globally]
Signed-off-by: Vanya Sergeev <vsergeev at gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some packages don't automatically enable IPv6 support if not configured
with --disable-ipv6, or use AC_TRY_RUN which doesn't work when cross
compiling (like curl), so explicitly configure with --enable-ipv6.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Drop kexec-fix-linker-options.patch as this has been fixed upstream.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This also requires moving a few include directives below the "all:"
target in the main Makefile, otherwise the new target to create the
toolchain file in pkg-cmaketargets.mk gets used as the default make
target instead of "all:".
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
There used to be a mechanism using which packages could leave a
.fakeroot.<something> file which could contain commands to be executed
within the fakeroot environment. Since this mechanism is no longer
used by any package, remove it from the common infrastructure.
The latest user was nfs-utils, which used this mechanism to do the
"make install" as root, since doing otherwise was not supported. But
since 16e7b8255c, nfs-utils has been
upgraded and converted to the package infrastructure, and this hack is
no longer necessary. Another past user was the ltp-testsuite package,
for the same reason, and since
a72a670489, the fakeroot hack is no
longer needed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The only variable that is used is HOST_LOADLIBES, defined for the
cygwin case in the kconfig build. Since we don't support cygwin,
simply get rid of this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit 4fbff28b removed the 'depends on' statements for the XML choice.
Therefore, the expat and libxml2 options are always available. Remove
the cryptic part of help text that tells you to select something if it
is not available.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The patch pattern was expanded before being into the patch directory so the
expansion can add incorrect files.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Short version avoids compiling problems with toolchains
containing long version string like Linaro toolchain.
[Peter: drop head/sed as -dumpversion returns version directly]
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Boost 1.49 added two new modules, locale and timer - So add sub options
to control compilation of those. The locale module by default compiles
the posix backend under Linux, but this needs monetary.h which isn't
provided by uClibc, so work around that.
While we're at it, hide the icu option as that is just an internal
configuration option used by E.G. the locale module.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
A host package that uses AUTORECONF (such as host-libglib2)
may end up running './config.status --recheck'. This will
call the configure script with the environment variables
set in HOST_MAKE_ENV. If PKG_CONFIG_SYSROOT_DIR is missing
this will cause the hardcoded sysroot dir take effect leading
to wrong paths.
See commit 22acade2ec which works around this problem by
fiddling with the generated .pc file. This commit becomes
obsolete with this fix.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Cc: Daniel Mack <zonque@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
screen's configure script thinks it is running on a SVR4 system when it
detects libelf, breaking the build.
At the same time cleanup the package somewhat, and ensure the correct
CFLAGS are used.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add gcc 4.7.0 to the toolchain options.
[Peter: drop 0001-toolchain-gcc-add-4.7.x-series.txt]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Switch from the strict UCLIBC_HAS_CTYPE_ENFORCED=y to the less
restrictive UCLIBC_HAS_CTYPE_CHECKED=y since it breaks dialog under
certain circumstances (bug #5018).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Makedevs path name is currently limited to 40, changed it to
PATH_MAX 4096 from linux/include/linux/limits.h
Signed-off-by: Julian Lunz <git@jlunz.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since these two special make targets are very useful but not yet
mentioned in the documentation I added them to the make help and
the manual.
Signed-off-by: Stephan Hoffmann <sho@reLinux.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The python bindings use swig, which we don't have in buildroot (but might be
installed on the host), so disable it.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes: #4886
[Peter: fix whitespace, C++ dep, optional zlib dep]
Signed-off-by: Simon Dawson <spdawson at gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The full valgrind installation takes more than 20 MB, while one typically does
not use all of its tools. This patch adds extra config options to select which
tools to install.
[Peter: Don't default experimental tools to 'y' as suggested by Arnout]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Correct fix for CVE-2011-4313
9.6-ESV-R5-P1 used a restart workaround.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The big-endian microblaze external toolchain is missing vital
characteristics being set, such as LARGEFILE support, IPV6 and so on.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Stephan Hoffmann <sho@reLinux.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Similar to how we recently changed dbus. At the same time also reorder
options to put 'none' option in front (default).
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The init script was expecting the binary to be called tinyhttpd, but httpd
was used. Fix it to install as tinyhttpd as httpd will conflict with other
web servers (E.G. the busybox one).
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fix two things in the giblib package:
1- fix prefix breakage
- s/STAGING/STAGING_DIR/ (Thomas)
- prefix is .../usr, not .../usr/lib or .../usr/bin
2- fix the configure.ac/Makefile.am breakage
- imlib2 sets IMLIB2_(LIBS|CFLAGS), not IMLIB_(LIBS|CFLAGS)
- autoreconf the package, install missing files
Note that both configure.ac and configure.in are present in the
package, so both are fixed, although only configure.ac is used
(configure.in is the legacy name).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The utmpx defines for when the target systems lacks utmpx is incomplete,
resulting in a build failure, so fix it.
This can be triggered by a uClibc toolchain that lacks UTMPX in the
configuration, or an older (<= 0.9.31) uClibc which lacks the
functionality.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Red Hat versions of perl do not honour the setting of LD_RUN_PATH
without this option. This leads to perl shared objects being installed
without an rpath set which causes problems for target tools when
searching for dependant shared libraries.
Signed-off-by: Will Newton <will.newton@imgtec.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The 3.3 kernel headers define the umode_t type within a __KERNEL__
preprocessor ifdef region. This results in a broken kernel header in the
buildroot toolchain.
[Peter: This is discussed upstream here:
https://bugzilla.kernel.org/show_bug.cgi?id=42986
Long term socat/syslinux should stop using this header, but this hasn't
been fixed upstream yet]
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Microperl will build host-microperl and install it into HOST_DIR/usr/bin,
where other packages will pick it up as _CONFIGURE_OPTS / _MAKE_ENV
prepends that to the path.
libxml-parser-perl didn't though, so it would still be built against
the system perl, causing host-intltool to fail when it would use
host-microperl together with libxml-parser-perl if the system perl
isn't compatible with host-microperl.
Fix it by using HOST_CONFIGURE_OPTS and ensuring it is built after
(host-)microperl if enabled.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The MICROPERL_INSTALL_TARGET_CMDS used the following construct in a
for loop:
[ -d $(@D)/lib/$$j ] && cp -af $(@D)/lib/$$j \
$(TARGET_DIR)/$(MICROPERL_MODS_DIR) ; \
[ -f $(@D)/lib/$$i ] && $(INSTALL) -m 0644 -D $(@D)/lib/$$i \
$(TARGET_DIR)/$(MICROPERL_MODS_DIR)/$$i; \
The problem is that when at the last iteration, the second test (-f)
fails, then the whole loop ends with a non-zero error code, and makes
aborts the build. This happens for example if the last Perl modules in
the list is Time::Local, because such modules are taken care of by the
first condition (that copies a complete directory).
By moving to full if statements, we ensure that the return code is
zero even if the condition was false.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Unfortunately kernel 3.3 doesn't seem to work properly at the moment.
So lock down headers to version 3.2.x and kernel to 3.2.12.
Tested on qemu 1.0.1
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As pointed by Sagaert Johan in the mailing list and further testing version
1.6.15 has some issues.
So move to version 1.6.14 which is far more stable and compliant.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Recursivity is needed with some tarballs containing debian patches:
.
debian
changelog
control
patches
02-COPYRIGHT.patch
[...]
Since we can find some files which are not patches in those directories, only
consider .patch* and .diff* files as valid patches.
Due to recursivity, strip-components option is no more necessary so it has
been removed.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
test should exit with Exit-Code 0 if no .ub-File present and copy the
file if Exit-Code 1, otherwise make fails
Signed-off-by: Markus Kaindl <markus.kaindl@stusta.mhn.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Make sure that liburcu (and the packages that select it) cannot be
enabled on the architectures that are not supported. At the moment,
only x86, x86-64, PowerPC and ARM are supported.
[Peter: add armeb as well]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
parted correctly depends on util-linux, but fails to select the
libuuid suboption of util-linux, causing the following build failure
if libuuid remains unselected:
checking for uuid_generate in -luuid... no
configure: error: GNU Parted requires libuuid - a part of the util-linux-ng package (but
usually distributed separately in libuuid-devel, uuid-dev or similar)
This can probably be found on your distribution's CD or FTP site or at:
http://userweb.kernel.org/~kzak/util-linux-ng/
Note: originally, libuuid was part of the e2fsprogs package. Later, it
moved to util-linux-ng-2.16, and that package is now the preferred source.
make: *** [/home/test/test/output/build/parted-3.1/.stamp_configured] Error 1
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: fixup s/big-endian/big endian/ as pointed out by Thomas]
Signed-off-by: Alvaro G. M <alvaro.gamez@hazent.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The build of libsigc 2.2.8 fails with gcc 4.6 with the following error
message:
In file included from signal_base.cc:20:0:
../sigc++/signal_base.h:48:11: error: 'size_t' does not name a type In file included from ../sigc++/signal.h:8:0,
The 2.2.9 version was released with a fix for this build problem, so
we directly bump to the latest version 2.2.10, which builds fine under
gcc 4.6.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libatomic_ops build fails on architectures such as MIPS or SuperH that
are not supported. So we make it possible to select the libatomic_ops
package only for the architectures that are known to be supported.
[Peter: add armeb as supported arch]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It adds very little size overhead as the functions are just wrappers
around utmp, and E.G. systemd needs it.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes the following problem:
checking whether NLS is requested... yes
checking for intltool >= 0.35.0... ./configure: line 12323: intltool-update: command not found
found
configure: error: Your intltool is too old. You need intltool 0.35.0 or later.
make: *** [/home/test/test/output/build/glib-networking-2.30.2/.stamp_configured] Error 1
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes the following problem:
atd.o: In function `run_file':
atd.c:(.text+0x35c): undefined reference to `fork'
atd.c:(.text+0x75c): undefined reference to `fork'
daemon.o: In function `daemon_setup':
daemon.c:(.text+0x4bc): undefined reference to `fork'
collect2: ld returned 1 exit status
make[1]: *** [atd] Error 1
make[1]: Leaving directory `/home/test/test/output/build/at-3.1.12'
make: *** [/home/test/test/output/build/at-3.1.12/.stamp_built] Error 2
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes the following build problem:
checking for intltool >= 0.35.0... ./configure: line 17915: intltool-update: command not found
found
configure: error: Your intltool is too old. You need intltool 0.35.0 or later.
make: *** [/home/test/test/output/build/transmission-2.33/.stamp_configured] Error 1
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: drop _INSTALL_TARGET = NO as it installs a shared lib]
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
While there's some microblaze support in mainline gcc from 4.6.x,
there still seems to be something missing with the uClibc support, so
disable these for now.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Software is ancient, upstream is missing and the package hasn't seen any
significant changes since it was added in 2003.
Unless someone steps up to update it (E.G. to gentargets), it will
be removed during the 2012.05 cycle.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The Avnet S6LX9 Microboard is a small USB-Stick sized module
containing a Spartan6 FPGA capable of running the Microblaze
softcore processor together with RAM and FLASH memory.
This board support pachage assumes that the Microblaze Bitfile
available from the Avnet website is programmed into the FPGA.
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch adds the options needed to build the SimpleImage containing
the device tree structure needed for the Microblaze architecture.
Handling Device Tree and SimpleImage will be handled in a general way
in the future.
I provide this patch to be able to build the system in the meantime.
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Alvaro G. M <alvaro.gamez@hazent.com>
Tested-by: Stephan Hoffmann <sho@relinux.de>
Downloading Microblaze LE toolchain works on a clean install
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This modifies the definition of DOWNLOAD to receive two arguments:
the first one is the full URL of the file to download, whereas the second
(and optional) is the name the file will have once downloaded.
Same thing with the SOURCE_CHECK_WGET and SCP functions.
All calls to these functions have been changed to the shortest form of
the new API, except for toolchains acquisition. Since there is quite a
number of different toolchains this call to DOWNLOAD is better set to the
generic one.
Signed-off-by: Alvaro G. M <alvaro.gamez@hazent.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Stephan Hoffmann <sho@relinux.de>
Downloading Microblaze LE toolchain works on a clean install
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: adjusted according to Arnout's suggestions]
Signed-off-by: Samuel MARTIN <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When binutils was converted to the package infrastructure (commit
009407e6b), the variable that elf2flt uses to find the binutils
libraries disappeared. So use HOST_BINUTILS_DIR instead of
BINUTILS_DIR1.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
ar9271.fw is the old convention for the firmware.
Starting with kernel 3.0 the new convention is htc_9271.fw which is a
newer version of the firmware so symlinking won't do it and there are no
guarantees that the newer firmware will work with the older driver
either.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump to version 1.0.0h to fix CMS and S/MIME Bleichenbacher attack (CVE-2012-0884)
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The help text for the choice of different stripping levels is removed,
since it is not displayed by menuconfig. Instead, only the per-option
help text is visible, so this text is improved.
[Peter: slightly reworked text]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When an external toolchain is used, it is very likely that it contains
a pre-built version of a gdbserver that has the same version as the
cross-gdb included in the external toolchain. So, we now provide an
option that allows to copy this pre-built gdbserver to the target.
As the location of the gdbserver in the external toolchain is not
standardized, we only support the CodeSourcery and Crosstool-NG
layouts for the moment. Other locations can be added later.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The BR2_ENABLE_DEBUG option selects the compilation and installation
of gdbserver on the target. This is a bit restrictive, especially for
external toolchains, which may already contain a gdbserver on the
target.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: fix download URL, move to 'Hardware handling' section]
Signed-off-by: Simon Dawson <spdawson at gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The squashfs3 package uses the old get_nprocs() GNU extension which does not
exist in uClibc. This has already been fixed in newer squashfs releases
(>=4.0). The patch is similar to the one committed in
dfa2a513e1
[Peter: add patch header]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Without the -m64, choosing the x86_64 architecture with a Sourcery external
toolchain will result in a 32-bit rootfs.
Also simplified the help text to reflect this change.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some of the patches depends on eachother, so rename them to ensure they
get applied in the correct order.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump to version 2.60 of dnsmasq with the new lua scripting option.
Switch LDFLAGS from MAKE_ENV to MAKE_OPT to make it work properly.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Building without BR2_PACKAGE_LUA_SHARED_LIBRARY failed because of
missing -ldl. dl is used by lua's dynamic module loading.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libethumb will determine during configuration phase whether to build the
optional libexif and libedbus modules. It will enable this modules if
libedbus or libexif are present on the target system. Therefore, we need
to add these packages as optional dependencies to libethumb.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Drop the patch for kernel >= 3.3
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
- bump to 2.5 and change download location
- disable iwmmxt support for CPU's that don't have
this feature
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump usbutils version to 005 and also switch to a debian mirror since
it's still missing upstream.
[Peter: add comment about autoreconf, use snapshot.debian.org]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The original version is gone, so switch to sourceforge wipe and bump to
version 2.3.1
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: only disable fallocate for uClibc toolchains]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes for CVE-2011-1944, CVE-2011-2821, CVE-2011-2834, CVE-2011-3919,
CVE-2012-0841 and others from upstream.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add security patches for CVE-2011-1202 and CVE-2011-3970.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
There are a couple of Renesas SH devices with 8 serial ports used.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: fix whitespace and deps (wchar, ncurses, only iconv if !locale)]
Signed-off-by: Simon Dawson <spdawson at gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This allows ccache to re-use its cache contents even if the compiler
binary mtime has changed. It is the simplest approach to solve this
problem, and it works for the internal, external and crosstool-ng
toolchain backends.
Of course, it leaves the user responsible for invalidating the cache
when necessary, but there doesn't seem to be a real good solution that
allows both to: 1/ keep the cache contents accross builds and re-use
it and 2/ invalidate the cache automatically when the compiler chances
in an incompatible way.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The problem is that without this, ccache would link against the zlib
of the build system, but we might build and install a different
version of zlib in $(O)/host afterwards, which ccache will pick
up. This might break if there is a version mismatch. A solution would
be to add host-zlib has a dependency of ccache, but it would require
tuning the zlib .mk file to use HOSTCC_NOCCACHE as the
compiler. Instead, we take the easy path: tell ccache to use its
internal copy of zlib, so that ccache has zero dependency besides the
C library.
Fixes bug #4808.
Thanks to Raúl Sánchez Siles <rsanchezs@infoglobal.es> for reporting
the bug and testing the proposed solution.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Convert microperl to gentargets infrastructure
* Bump to a more modern version 5.12.4
* Introduce the bundle options to simplify people's lives
host-microperl is a fully-fledged perl.
For the time being we can't build XS modules thus breaking
target automake support for example since it requires IO.
target-automake was broken before anyway since the automake version
bump.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
gpsd uses dbus-glib as the dbus interface, so it should only be built if
libglib2 has been selected. To simplify things, build dbus support only
if dbus-glib is selected.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It misses -lm when compiling miniperl
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In cf2486bf31, we changed from using the
-P option of wget (to set the output *directory*) to using the -O
option (to set the output *file*). Unfortunately, wget -O has a
strange behaviour: it creates an empty 0-byte file even if the
download fails (for example when there is no network connection).
The problem is that then Buildroot thinks the download was successful
and therefore goes on with extracting the tarball.
The following succession of events makes Buildroot think that the
download has been sucessful:
* Buildroot calls the DOWNLOAD_WGET macro with the URL of the
official site
* It tests if the file exists in the download directory, it doesn't
exist.
* It calls wget. wget fails to download the file and returns an
error code, but leaves an empty file with the correct name in the
downloaded directory.
* Since the previously download failed, Buildroot tries another
download from the Buildroot mirror (sources.buildroot.net)
* It tests if the file exists in the download directory... and it
exists! So this second download returns with success, and
Buildroot assumes the file has been downloaded properly.
This scenario brings us with the following result, where the download
fails, but Buildroot continues its execution and tries to extract the
tarball:
$ rm /opt/dl/glib-2.30.2.tar.bz2
rm: cannot remove `/opt/dl/glib-2.30.2.tar.bz2': No such file or directory
$ rm -rf build/host-libglib2-2.30.2/
$ make
make -C /home/thomas/projets/buildroot O=/opt/outputs/udisks/.
>>> host-libglib2 2.30.2 Downloading
--2012-03-03 12:06:25-- http://ftp.gnome.org/pub/gnome/sources/glib/2.30/glib-2.30.2.tar.bz2
Resolving ftp.gnome.org... failed: Name or service not known.
wget: unable to resolve host address `ftp.gnome.org'
>>> host-libglib2 2.30.2 Extracting
bzcat /opt/dl//glib-2.30.2.tar.bz2 | tar --strip-components=1 -C /opt/outputs/udisks/build/host-libglib2-2.30.2 -xf -
bzcat: Compressed file ends unexpectedly;
perhaps it is corrupted? *Possible* reason follows.
[...]
tar: This does not look like a tar archive
tar: Exiting with failure status due to previous errors
make[1]: *** [/opt/outputs/udisks/build/host-libglib2-2.30.2/.stamp_extracted] Error 2
make: *** [all] Error 2
$ ls -l /opt/dl/glib-2.30.2.tar.bz2
-rw-r--r-- 1 thomas thomas 0 Mar 3 12:12 /opt/dl/glib-2.30.2.tar.bz2
Therefore, this commit modifies DOWNLOAD_WGET so that it removes the
downloaded file if wget returns with an error.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
at91sam9260_defconfig contains support for the EVM (since v3.2).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Busybox also provides flash applets nowadays, so ensure the mtd version
takes precedence if both are enabled.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The recent zlib bump broke imagemagick. This has been fixed upstream
in 6.7.5, but the xml2-config fix is still not upstream and 6.7.5
needs autoconf 2.67 to autoreconf (and we have 2.65), so we cannot
easily use that.
Instead move to the most recent version using autoconf 2.64 and
backport the fix from imagemagick svn. At the same time also
ensure zlib+bzip2 support is picked up if enabled.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Linaro has just released a new pre-built toolchain, available as a
tarball, which is a pure toolchain (only the C library is
included). This makes this new Linaro 2012.01 toolchain usable in
Buildroot, so let's integrate the support for it.
In addition to simply adding the new external toolchain at the usual
locations, this patch allows need to adapt a few things to support
Linaro toolchains. Most toolchains store their libraries in the "lib/"
or "usr/lib" directories relative to the toolchain. Buildroot
toolchains on the other hand, store the libraries in the
"usr/<target-name>/lib" directory. And the Linaro toolchain has
choosen to use the "lib/<target-name>" directory. Therefore, this
patch adjust:
* The logic to search a particular library when that library needs to
be copied to the target directory
* The logic to deduce the sysroot directory from the libc.a file
location in the toolchain: removing "(usr/?)lib(64?)" is no longer
sufficient, we need to take into account the "lib/<target-name>/"
case.
Since the Linaro toolchain generates code for Cortex-A processors
only, the selection of this toolchain is limited to Cortex-A8 and
Cortex-A9.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current check for uClibc toolchain was verifying that a
ld-uClibc.so dynamic loader was present. However, with static-only
uClibc toolchains, this does not work. Instead, we check for an
uClibc-specific header file in the sysroot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When the mechanism that allows Buildroot to download external
toolchains automatically was added, all the sanity checks on the
external toolchains were not performed. This commit re-enables those
checks that we already do on external toolchains that are not
downloaded/extracted by Buildroot. This makes the toolchain checks
more consistent accross various configurations.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Each multilib variant need to be selected using a special combination
of flags, requiring specific choices of the Buildroot options. This
commit documents those configuration choices to make it easier to use
the various multilib variants.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We are going to add one more ARM Sourcery toolchain version, so it's
time to remove the oldest version.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The BR2_TARGET_OPTIMIZATION flags were not used by the external
toolchain wrapper, which broke the multilib selection logic of
multilib external toolchains. It also simplifies the compilation of
external programs since all flags are properly passed automatically by
the toolchain wrapper.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When an external toolchain has multiple variants organized in
sub-directories, Buildroot only copies the selected sysroot and not
all sysroots. In order to make this work, Buildroot creates a symbolic
link of the name of the original selected sysroot to the main sysroot
to trick the compiler so that it finds its libraries at the expected
location.
I.e, if the toolchain as the following organization (example take on
the ARM CodeSourcery toolchain) :
. for ARMv5T
armv4 for ARMv4T
thumb2 for ARMv7-A/Thumb
and ARMv4T is selected, then Buildroot will copy the contents of
armv4t/ from the toolchain into its $(STAGING_DIR) and then create a
$(STAGING_DIR)/armv4t symbolic link to $(STAGING_DIR).
However, our logic to do so only works when there was one directory
level for multilib sysroots. But in the MIPS CodeSourcery toolchain
there are multiple levels. For example, the MIPS16 soft-float
little-endian sysroot variant is in mips16/soft-float/el/ compared to
the main sysroot.
This patch improves our logic to support this case. The logic is a bit
more complicated as we don't want to create a symbolic link to an
absolute path, but a symbolic link to a relative path, because we want
the host/ directory to be relocatable.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The IA32 Sourcery CodeBench toolchain has a relatively special
structure, with the following multilib variants:
* Intel Pentium 4, 32 bits, the multilib variant is in ./ relative to
the main sysroot, with the libraries in the lib/ directory.
* Intel Xeon Nocona, 64 bits, the multilib variant is in ./ relative
to the main sysroot, with the libraries in the lib64/ directory.
* Intel Atom 32 bits, the multilib variant is in atom/ relative to
the main sysroot, with the libraries in the lib/ directory.
* Intel Core 2 64 bits, the multilib variant is in core2/ relative to
the main sysroot, with the libraries in lib64/ directory.
So the first two variants are in the same sysroot, only the name of
the directory for the libraries is different.
Therefore, we introduce a new ARCH_LIB_DIR variable, which contains
either 'lib' or 'lib64'. This variable is defined according to the
location of the libc.a file for the selected multilib variant, and is
then used when copying the libraries to the target and to the staging
directory.
In addition to this, we no longer use the -print-multi-directory to
get the ARCH_SUBDIR, since in the case of the 64 bits variants of this
toolchain, it returns just '64' and not a real path. Instead, we
simply compute the difference between the arch-specific sysroot and
the main sysroot.
We also take that opportunity to expand the documentation on the
meaning of the different variables.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This allows to easily select the corresponding Atom multilib variant
in the Sourcery CodeBench toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With the Sourcery CodeBench IA32/AMD64 toolchain, the proper -march=
switch must be passed. So, on x86_64, we make sure that
BR2_GCC_TARGET_ARCH gets defined to the correct value, just as we do
on x86.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The host-libecore build tries to build the X11 backend. This works if
you have X11 headers/libraries installed on your build machine, but
fails if you don't, and Buildroot shouldn't depend on such things
being installed.
Therefore, we force host-libecore to not build any of the graphical
backends (X, XCB or DirectFB).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
qsort_r was only added in uClibc 0.9.33, so only enable it when we're sure
it's available. For external/ctng toolchains we cannot easily know, so
simply disable it there.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The e2fsprogs configure script enables the build of the e4defrag
utility by default. Disable it unless BR2_PACKAGE_E2FSPROGS_E4DEFRAG
is selected.
Also the --disable-blkid option is not recognized by the configure
script. Use --disable-libblkid instead.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Update to latest stable release. SSL support now depends on
glib-networking with gnutls support instead of using gnutls
directly.
Remove libsoup-CVE-2011-2054.patch, this is fixed upstream.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
glib-networking provides network-related GIO modules for glib.
It is used by newer versions of libsoup to implement SSL/TLS
support.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Update to latest stable release and add a dependency on libffi which
is needed by GObject.
[Peter: fixup build on uClibc]
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As described in the buildroot dev day report, using a post-build script
is nowadays the preferred way of adding stuff to the rootfs.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
From the release notes:
Security: Fix use-after-free bug that could be triggered if command="..."
authorized_keys restrictions are used. Could allow arbitrary code
execution or bypass of the command="..." restriction to an authenticated
user.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
- Use git:// URLs for freescale git trees
- Enable hard fpu for A8
- Board uses uSD cards, so enable ext2 filesystem
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Buildroot config and Linux Kernel config.
Freescale binaries (xf86 video driver and multimedia codecs) not supported yet.
Signed-off-by: Mathieu Briand <mbriand@adeneo-embedded.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It seems that make 3.82 gets confused and considers makekeys
out of date when there isn't a makekeys.o, so ensure that we
create both makekeys and makekeys.o before building.
Also move the workaround to the extract step so we can build using
make's default rules rather than explicitly calling gcc.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The DSTROOT option passed for the staging install would install
into the target directory, which is not what was intended.
Signed-off-by: Will Newton <will.newton@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
/etc/os-release is becoming a standard interface for distribution
name/version info, so let's use that instead of the nonstandard
/etc/br-version. Format of the file is something like:
NAME=Buildroot
VERSION=2012.02-rc1-00003-g2d10e81
ID=buildroot
VERSION_ID=2012.02-rc1
PRETTY_NAME="Buildroot 2012.02-rc1"
For more details, see:
http://0pointer.de/public/systemd-man/os-release.html
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some URLs use url-encoded arguments to specify the file to download.
Wget will then use an output file name which includes all the ampersands
and such. However, this is not what we see from buildroot.
E.g.:
FOO_SITE="http://git.foo.com/?p=foo.git;a=blob;f="
FOO_SOURCE="foo.tgz"
wget will download this into $(DL_DIR)/index.html?p=foo.git;a=blob;f=foo.tgz
buildroot thinks it's in $(DL_DIR)/foo.tgz
To make sure the view of wget and buildroot are consistent, specify
the output file explicitly.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
distutils adds -L$LIBDIR (/usr/lib), breaking build of binary extensions.
Seen with netifaces, but other extensions may be affected as well.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
