* The PID file is not created unless the '-m' option is passed to
start-stop-daemon.
* Remove the mark '-m 0' option as it's not supported by busybox's
syslogd.
* Syslogd and Klogd forks to background by default giving as a result
that the pid stored in the PID file is not correct. Let the
background job be done by 'start-stop-daemon' by passing '-n'
(foreground) to the daemons and '-b' to start-stop-daemon. This
way the pid stored in the PID files is correct.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is the list needed to run the Linaro pre-built toolchain
on a 64-bit Ubuntu 13.10 system.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This bump to allign with the tzdata bump in previous commit.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes for camera features (exposure, capture loop, shutter speed),
h264 encoding headers, EXIF thumbnails.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also tweak the kernel and buildroot config for basic WiFi support.
And fetch the ASoC patches for builtin audio.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
WebKit has some architecture specific support, and therefore is not
necessarily available for all architectures. Make sure the Qt WebKit
option cannot be selected on those architectures that are not
supported.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Enable demo mode for netperf to activates a global "-D" <interval> option.
This option will display interim results at least every time interval.
Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
dhcpcd fails to build on non-MMU platforms, even with the
--disable-fork option:
bind.o: In function `_daemonise':
bind.c:(.text+0x62): undefined reference to `_fork'
collect2: ld returned 1 exit status
Therefore, we make dhcpcd depend on MMU support, and remove the
non-MMU condition in the .mk file. More recent versions of dhcpcd do
support non-MMU properly, but this commit intends to be only a fix.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Samuel Martin <s.martin49@gmail.com>
The libnl configure script has a --{enable,disable}-cli options that
allows to enable or disable the compilation of the libnl tools. Use
this option instead of compiling everything and then removing the
installed programs.
Note that we also get rid of the uninstall command, which is planned
to be globally removed in Buildroot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
libcap currently has one patch, but it is named using the old naming
strategy, which includes the package version, but not a patch
number. This commit switches this to use the new patch naming
strategy.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Samuel Martin <s.martin49@gmail.com>
According to the documentation, chapter
6.2.8.2 How to add a package from github
"
[...]
FOO_VERSION = tag or full commit ID
FOO_SITE = http://github.com/<user>/<package>/tarball/$(FOO_VERSION)
[...]
- The tarball name generated by github matches the default one from
Buildroot (...),
so it is not necessary to specify it in the +.mk+ file.
"
This commit makes the appropriate changes.
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
rsync by default compiles statically its own zlib and popt
libraries, it is better to use system wide libraries instead -
both for disk and memory consumption. Change rsync package
accordingly.
Also previously a debug configure option has been lost, as
overwritten by '--with-included-popt' option - fixed.
For example, on ARMv5 rsync binary size is reduced by about 25%.
Signed-off-by: Denis Mingulov <denis@mingulov.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The output extension and the generation messages refer to 'text', but the make
target was confusingly 'txt'. This patch changes the make target for
consistency.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To generate the manual, you need a few tools. If these are not present,
pretty cryptic error messages are given.
This patch adds a simple check for these dependencies, before attempting to
build the manual.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Comment 7e37d235f "zeromq: needs threads" adds BR2_TOOLCHAIN_HAS_THREADS
dependency but forgot to add corresponding comment for cppzmq and czmq. Fix it.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Adding support for sysvinit to install reboot, poweroff, and pidof
commands available in /sbin.
Fixes bug #6620
Removed uninstall commands since they aren't used.
There is an error with sysvinit that will prevent the system from booting
if "dshm::sysinit:/bin/mkdir -p /dev/shm" is not present in the inittab.
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As noted by "George" in bug #6416, the xenomai-do-not-install-devices
patch is not needed, since Xenomai provides a "install-user" target to
only install the libraries/headers and not the device files. This
patch changes xenomai.mk to use 'install-user' and removes the useless
patch.
Fixes bug #6416.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds missing comments about (e)glibc dependencies and updates the
text of existing comments.
Additionally, it splits dependency expressions for the touched packages from
depends on BR2_BASE_DEP && !BR2_TOOLCHAIN_USES_GLIBC
to
depends on BR2_BASE_DEP
depends on !BR2_TOOLCHAIN_USES_GLIBC
so that (positive) base dependencies are separate from the (negative)
toolchain dependencies. This strategy makes it easier to write such comments
(because one can simply copy the base dependency from the actual package
config option), but also avoids complex and long boolean expressions.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Ncurses not necessary when building host-util-linux, so passing
--without-ncurses avoids from misdetecting an installed host ncurses
on the build machine.
[Thomas: improve commit message]
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
