mirror of
https://github.com/godotengine/buildroot.git
synced 2026-01-04 06:10:16 +03:00
31be2ec220
Since things are no longer installed in $(HOST_DIR)/usr, the callers should also not refer to it. This is a mechanical change with git grep -l 'HOST_DIR}\?/usr/' board | xargs sed -i 's%\(HOST_DIR}\?\)/usr/%\1/%g' Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A13-OLinuXino
Intro
=====
This default configuration will allow you to start experimenting with
the buildroot environment for the A13-OLinuXino. With the current
configuration it will bring-up the board, and allow access through the
serial console.
For more details about the A13-OLinuXino:
https://www.olimex.com/Products/OLinuXino/A13/A13-OLinuXino/open-source-hardware
How to build it
===============
Configure Buildroot:
$ make olimex_a13_olinuxino_defconfig
Compile everything and build the rootfs image:
$ make
Note: you will need access to the internet to download the required
sources.
How to write the SD card
========================
The sdcard.img file is a complete bootable image ready to be written
on the boot medium. To install it, simply copy the image to a micro SD
card:
# dd if=output/images/sdcard.img of=/dev/sdX
Notes:
- replace 'sdX' with the actual device with your micro SDcard,
- you may need to be root to do that (use 'sudo').
Eject the SD card, insert it in the A13-OLinuXino board, and power it
up.