mirror of
https://github.com/godotengine/buildroot.git
synced 2026-01-04 06:10:16 +03:00
a1a152684e
Add a defconfig for the Olimex A10-OLinuXino-LIME, reusing most of the A20-OLinuXino-Lime and A13-OLinuXino files (sym links). The configurations for Olimex A10-OLinuXino-LIME feature: - U-Boot 2018.03 - Mainline Linux kernel 4.14.26 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> [Arnout: remove commented-out BR2_ARM_EABIHF=y (which is default)] Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
A10-OLinuXino-LIME
Intro
=====
These are open hardware boards, all based on the Allwinner A10 SoC.
for more details about the boards see the following pages:
- https://www.olimex.com/Products/OLinuXino/open-source-hardware
- https://www.olimex.com/Products/OLinuXino/A10/A10-OLinuXino-LIME/
The following defconfigs are available:
- olimex_a10_olinuxino_lime_defconfig
for the A10-OLinuXino-LIME board using mainline kernel
(see http://linux-sunxi.org/Linux_Kernel for more details)
How to build it
===============
Configure Buildroot:
$ make <board>_defconfig
Compile everything and build the rootfs image:
$ make
Result of the build
-------------------
After building, you should get a tree like this:
output/images/
+-- boot.scr
+-- rootfs.ext2
+-- rootfs.ext4 -> rootfs.ext2
+-- sdcard.img
+-- sun4i-a10-olinuxino-lime.dtb (lime, mainline)
+-- u-boot.bin
+-- u-boot-sunxi-with-spl.bin
`-- zImage
How to write the SD card
========================
The sdcard.img file is a complete bootable image ready to be written
on the boot medium. To install it, simply copy the image to a uSD
card:
# dd if=output/images/sdcard.img of=/dev/sdX
Where 'sdX' is the device node of the uSD.
Eject the SD card, insert it in the A10-OLinuXino board, and power it up.