mirror of
https://github.com/godotengine/buildroot.git
synced 2026-01-04 06:10:16 +03:00
b4245aef53
boot.cmd using dts file instead of dtb which was
added in below commit, so fix the same.
"board: Add Bananapi M1 support"
(sha1: 5f50fb8d1d)
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Intro
=====
This default configuration will allow you to start experimenting with the
buildroot environment for the Bananapi M1. With the current configuration
it will bring-up the board, and allow access through the serial console.
Bananapi M1 link:
http://www.banana-pi.org/m1.html
Wiki link:
https://openedev.amarulasolutions.com/display/ODWIKI/Bananapi+M1
This configuration uses U-Boot mainline and kernel mainline.
How to build
============
$ make bananapi_m1_defconfig
$ make
Note: you will need access to the internet to download the required
sources.
How to write the SD card
========================
Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.
Copy the bootable "sdcard.img" onto an SD card with "dd":
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
$ sudo sync
Insert the micro SDcard in your Bananapi M1 and power it up. The console
is on the serial line, 115200 8N1.