mirror of
https://github.com/godotengine/buildroot.git
synced 2026-01-02 21:48:20 +03:00
6458b154a2
Commit 68b5b79b2f has set the getty port to the default console but left
"ttyO0" in bootargs, in the U-Boot environment. Use "ttyS0", instead.
Also set loadaddr to 0x82000000 and fdtaddr to 0x88000000, replacing the
values that were valid for the ancient U-Boot and Linux pre-installed on
old boards but cause boot hangs with the current versions.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
CircuitCo BeagleBone Texas Instuments AM335x Evaluation Module (TMDXEVM3358) Description =========== This configuration will build a complete image for the beaglebone and the TI AM335x-EVM, the board type is identified by the on-board EEPROM. The configuration is based on the ti-processor-sdk-02.00.00.00. Device tree blobs for beaglebone variants and the evm-sk are built too. For Qt5 support support use the beaglebone_qt5_defconfig. How to build it =============== Select the default configuration for the target: $ make beaglebone_defconfig Optional: modify the configuration: $ make menuconfig Build: $ make Result of the build =================== output/images/ +-- am335x-boneblack.dtb +-- am335x-bone.dtb +-- am335x-evm.dtb +-- am335x-evmsk.dtb +-- boot.vfat +-- MLO +-- rootfs.ext2 +-- rootfs.tar +-- sdcard.img +-- u-boot.img +-- uEnv.txt +-- zImage To copy the image file to the sdcard use dd: $ dd if=output/images/sdcard.img of=/dev/XXX Tested hardware =============== am335x-evm (rev. 1.1A) beagleboneblack (rev. A5A) beaglebone (rev. A6) 2016, Lothar Felten <lothar.felten@gmail.com>