mirror of
https://github.com/godotengine/buildroot.git
synced 2026-01-06 18:09:44 +03:00
adc7cccde6
Commit68b5b79b2fhas set the getty port to the default console but left "ttyO0" in bootargs, in the U-Boot environment. Use "ttyS0", instead. Also set loadaddr to 0x82000000 and fdtaddr to 0x88000000, replacing the values that were valid for the ancient U-Boot and Linux pre-installed on old boards but cause boot hangs with the current versions. Signed-off-by: Carlos Santos <unixmania@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> (cherry picked from commit6458b154a2) Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
CircuitCo BeagleBone Texas Instuments AM335x Evaluation Module (TMDXEVM3358) Description =========== This configuration will build a complete image for the beaglebone and the TI AM335x-EVM, the board type is identified by the on-board EEPROM. The configuration is based on the ti-processor-sdk-02.00.00.00. Device tree blobs for beaglebone variants and the evm-sk are built too. For Qt5 support support use the beaglebone_qt5_defconfig. How to build it =============== Select the default configuration for the target: $ make beaglebone_defconfig Optional: modify the configuration: $ make menuconfig Build: $ make Result of the build =================== output/images/ ├── am335x-boneblack.dtb ├── am335x-bone.dtb ├── am335x-evm.dtb ├── am335x-evmsk.dtb ├── boot.vfat ├── MLO ├── rootfs.ext2 ├── rootfs.tar ├── sdcard.img ├── u-boot.img ├── uEnv.txt └── zImage To copy the image file to the sdcard use dd: $ dd if=output/images/sdcard.img of=/dev/XXX Tested hardware =============== am335x-evm (rev. 1.1A) beagleboneblack (rev. A5A) beaglebone (rev. A6) 2016, Lothar Felten <lothar.felten@gmail.com>