mirror of
https://github.com/godotengine/buildroot.git
synced 2026-01-01 13:49:03 +03:00
bc0eab7d1d
As described by http://linux-sunxi.org/Bootable_SD_card#SD_Card_Layout The space betweem 544KB..1MB is reserved / used for the u-boot environment, so mark it as such to make sure genimage doesn't put other partitions here. Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
pcDuino v1 boards (http://www.linksprite.com/linksprite-pcduino)
Intro
=====
This default configuration will allow you to start experimenting
with the buildroot environment for the LinkSprite pcDuino v1 board
including its flavors pcDuino-Lite and pcDuino-Lite-WiFi. With the
current configuration it will bring-up the board and allow access
through the serial console as well as ethernet and wireless
network interfaces.
How to build it
===============
Configure Buildroot:
$ make linksprite_pcduino_defconfig
Modify configuration if needed, e.g. add more packages to target:
$ make menuconfig
Compile everything and build the SD card image:
$ make
How to write the SD card
========================
Once the build process is finished you will have an image
called "sdcard.img" in the output/images/ directory.
Copy the bootable "sdcard.img" onto an SD card with "dd":
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
How to boot new image
=====================
Insert SD card and reset the board. By default pcDuino board
boots from SD card.