NetworkManager includes some parts of the systemd-networkd code in its
codebase. That can be found at src/systemd/src/libsystemd-networkd.
The DHCP implementation provided by systemd-networkd is used when
NetworkManager is configured to use the internal implementation,
however the default is to use dhclient.
When NetworkManager is configured to use the internal dhcp and an
interface is setup with ipv6.method=auto (which is the default value)
or ipv6.method=dhcp, this flaw can be exploited. When using
ipv6.method=auto, the DHCPv6 client can be automatically started with a
Router Advertisement packet.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 0a51ba655c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit 52282828f0
("package/network-manager: add patches to build with kernel headers
3.2"), network-manager was changed to build with kernel headers as old
as 3.2, instead of 3.7 before. The dependency was changed accordingly,
but the Config.in comment was not.
This commit fixes this inconsistency.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 760dc48e15)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
handle new dependency to Jansson (since 1.10.0).
[Peter: unconditionally disable ovs support as suggested by Thomas]
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit fixes the warnings reported by check-package on the help
text of all package Config.in files, related to the formatting of the
help text: should start with a tab, then 2 spaces, then at most 62
characters.
The vast majority of warnings fixed were caused by too long lines. A
few warnings were related to spaces being used instead of a tab to
indent the help text.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Added --disable-concheck to avoid configure failure when libcurl is not
available:
checking for LIBCURL... no
configure: error: --enable-concheck requires libcurl library.
One would expect the concheck functionality to be automatically disabled
if libcurl is not found. But upstream wants to be explicitly disabled if
not wanted to prevent building NetworkManager without connectivity
check support without any evident warning on systems where libcurl is
not installed. See:
faa1b85dab
Proper support for concheck will be added in a subsequent patch.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for LGPLv2/LGPLv2+ is LGPL-2.0/LGPL-2.0+.
This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/LGPLv2(\+)?/LGPL-2.0\1/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license strings as much as possible.
SPDX short identifier for GPLv2/GPLv2+ is GPL-2.0/GPL-2.0+.
This change is done by using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/\<GPLv2\>/GPL-2.0/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The network-manager.mk passes --mandir=$(STAGING_DIR)/usr/man/, which
causes man pages to be installed in
$(STAGING_DIR)/$(STAGING_DIR)/usr/man and
$(TARGET_DIR)/$(STAGING_DIR)/usr/man.
This is definitely bogus and causes some build failures thanks to the
new check added by Yann E. Morin. This option was in
network-manager.mk since the addition of the package. Maybe it was
fixing a bug in the package logic back at the time, but nowadays, it
causes an installation at the wrong location. Without this commit, the
man pages are properly installed at the right location.
Fixes:
http://autobuild.buildroot.net/results/92683749b0b8e726bc83781ca6d8e103428362ba/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Removed patches:
* 0001-platform-move-link_get_user_ipv6ll_enabled-to-nm-platform-linux.patch:
no longer relevant (tested on 3.9 for raspberrypi)
* 0002-accept-auto-mode-interfaces.patch: accepted upstream
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch is based on a patch sent by Vicente Olivert Riera and commented by
Arnout Vandecappelle [1].
- Bump version to 1.23
- Add a hook to fix cross-compilation
- Fix license and license files
- Remove patch applied upstream
- Add a BR2_PACKAGE_LIBGPG_ERROR_ARCH_SUPPORTS variable
- Propagate the dependencies using that variable:
* package/cppcms
* package/crda
* package/gnupg2
- package/gcr
- package/midori
* package/kodi
* package/libaacs
* package/libassuan
* package/libgcrypt
* package/libgpgme
* package/libksba
* package/libmicrohttpd
- package/janus-gateway
- package/kodi
- package/ola
- package/systemd
* package/libssh
* package/libssh2
- package/php-ssh2
* package/netatalk
* package/network-manager
* package/ntfs-3g
* package/opkg
* package/php-gnupg
* package/rng-tools
* package/strongswan
* package/vpnc
[1] http://patchwork.ozlabs.org/patch/416427/
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
[Thomas:
- rebase on master
- changing systemd no longer needed, as it no longer selects
libgcrypt.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Maxime:
- rebase on master
- bump to new version
- propagate dependencies to missing packages]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- fix hash file.
- change the way to handle the various arch so that it works properly
for uClibc.
- add nios2 arch support.
- Maxime Hadjinlian learned some basic Emacs-fu to do the final fixups
of this commit.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Following the removal of eglibc support, this commit replaces all
occurences of "(e)glibc" by just "glibc". Most of the occurences are in
package Config.in comments.
In addition, when the form "an (e)glibc ..." was used, it is replaced by
"a glibc ...".
[Peter: add new efi* packages, s/uclibc/uClibc as suggested by Romain,
systemd / liquid-dsp tweaks as suggested by Yann]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some wireless drivers report IW_MODE_AUTO instead of IW_MODE_MANAGED.
NetworkManager 1.0.12 introduced a change, which makes it skip such
interfaces.
This patch is a backport of a workaround for this problem from the
NetworkManager upstream.
Signed-off-by: Ilya A. Volynets-Evenbakh <ilya@total-knowledge.com>
[Thomas: add reference to the upstream commit.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Make the case of adding libgudev as a dependency more consistent with all
other dependency packages. The <pkg>_DEPENDENCIES variable sets the build
order which is conceptually independent of the underlying reason for that
dependency.
Also, remove the comments in hidapi.mk and udisks.mk. These comments explain
why BR2_PACKAGE_LIBGUDEV is selected, so the comments in corresponding
Config.in files are enough.
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
'echo -n' is not a POSIX construct (no flag support), we shoud use
'printf', especially in init script.
This patch was generated by the following command line:
git grep -l 'echo -n' -- `git ls-files | grep -v 'patch'` | xargs sed -i 's/echo -n/printf/'
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
NetworkManager uses code (originally from udev) that has since been
split from the main systemd codebase into libgudev.
Tweak the package files for NetworkManager to require libgudev when
building with systemd.
Signed-off-by: Nathaniel Roach <nroach44@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now network-manager depends on glibc, there is no need anymore for the
wchar and threads dependencies (implied by glibc). So remove them.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Thomas: fix hash origin, as noted by Baruch, upstream publishes a
hash file so there's no need to compute it locally.]
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Previously NetworkManager had to be enabled and started on the
first boot manually or by a script.
Add install define with the commands to setup the required
service files for automatic start.
Signed-off-by: Nathaniel Roach <nroach44@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The pidof -o option is only available in the Busybox applet if
CONFIG_FEATURE_PIDOF_OMIT is enabled, and it isn't really needed here as the
init script isn't called 'NetworkManager', so get rid of it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
NM only currently supports isc-dhcpc and dhcpcd as clients because NM
communicates with the client through DBus, and support for clients needs to
be written in. (as per files in src/dhcp-manager)
Buildroot's default, udhcpc is not supported.
Add the dependencies to Config.in, favoring dhcpcd as
default due to size.
[Peter: drop references to dhclient, isc-dhcpc is dhclient]
Signed-off-by: Nathaniel Roach <nroach44@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
dhclient and dhcpcd were moved from /usr/sbin to /sbin for busybox-less
SysV-style init with Debian utilities, so adjust accordingly.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
"<command> &>/dev/null" is supposed to redirect all output to /dev/null.
However, in shells that don't support it (dash, ash without bash extensions),
a command like "echo a &>/dev/null" is interpreted as
(a) "echo a" in background
(b) write nothing to /dev/null (redirect <empty command> to /dev/null)
This commit replaces "&>..." with ">/dev/null 2>&1".
Signed-off-by: André Erdmann <dywi@mailerd.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
