This patch cleans up board/zynqmp shellcheck issues.
Signed-off-by: Neal Frager <neal.frager@amd.com>
[Peter: wrap long lines, use quotes around entire word]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch cleans up board/zynq shellcheck issues.
Signed-off-by: Neal Frager <neal.frager@amd.com>
[Peter: use ${} for variables, quotes around entire word]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Board support package includes the following components:
- mainline Linux kernel 5.15.108
- mainline U-Boot 2023.04
- default packages from buildroot
Note: There is a problem in u-boot display management. It should display
the ST microelectronics logo but "noise" is displayed (like when running
the command dd if=/dev/urandom of=/dev/fb0 in Linux). I also tried to
change version (even the first version in which this feature was
introduced), but without success. Despite this I decided not to disable
the video management configuration to remind us that it needs to be
fixed :).
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Link: https://www.st.com/en/evaluation-tools/32f769idiscovery.html
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Kernel is built without network support. It is useless to compile the
package and then remove it from rootfs.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
After booting Linux the userspace is unusable since every command issued,
that is a symlink to busybox, fails because of no free ram. So let's
disable IIO in linux.config to give some more ram to userspace.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The QEMU board's post-image script will glob through various
`readme.txt` files for an appropriate command line to use. Recent linter
changes [1] prevents this from happening, and results in the following
build error:
>>> Executing post-image script board/qemu/post-image.sh
sed: can't read board/qemu/*/readme.txt: No such file or directory
Reverting part of the shellcheck fixes for the README file arguments and
marking a linter exception.
[1]: b32d7c99c6
Signed-off-by: James Knight <james.d.knight@live.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: also reinstate plural to the variable name]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Virtually all PCs nowadays have a PCI bridge and PCI devices.
All framnebuffer options depend on CONFIG_FB, which default is not 'y',
so also enable that.
The overwhelming majority of PCs nowadays also come with an UEFI
bootloader, that configures a framebuffer usable in early boot, which
the kernel can reuse without needing any hardware-specific driver.
EDID allows retrieving the capabilities of the connected display,
especially the frequencies and so on, to properly drive the display.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
[yann.morin.1998@free.fr:
- drop cosmetic CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER=y
- rewrite commit log to explain all new options
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Last-minute changes to d9b244d8a3 (board/qemu: define start qemu
script outside of post-image script) were not tested before being
pushed, so they introduced a bug.
As Arnout put it:
[...] multiple expressions need a -e to interpret them as
expressions (now they're interpreted as file names).
Fixes: d9b244d8a3
Reported-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: James Knight <james.d.knight@live.com>
Provides the ability to use a host system's QEMU. While a Buildroot
generated QEMU should work for most cases, a developer may wish to use
the system's QEMU for options which may not have been configured in the
Buildroot's QEMU build (e.g. configuring a different display mode).
Signed-off-by: James Knight <james.d.knight@live.com>
[yann.morin.1998@free.fr:
- use false/true instead of 0/1
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Provides the ability to forward command line options directly to QEMU.
When invoking `start-qemu.sh`, users can forward arguments by adding a
double dash (`--`) into the argument set, and any trailing arguments
will be forwarded into QEMU. For example, `start-qemu.sh -- --help`.
The original implementation supported a "serial-only" command line
argument to help run in a non-graphical mode for some use cases. These
changes try to promote a newly added `--serial-only` argument to drive
this mode; that being said, a `serial-only` argument will still be
accepted for backwards compatibility.
Signed-off-by: James Knight <james.d.knight@live.com>
[yann.morin.1998@free.fr:
- drop the warning: unknown options cause 'exit 1' already, and any
leftover is explicitly for qemu.
- use false/true instead of 0/1
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The following moves the definition of the QEMU board's `start-qemu.sh`
helper script from being inlined in the post-image script into its own
file. This should, in theory, make it easier to maintain the script in
the future.
Signed-off-by: James Knight <james.d.knight@live.com>
[yann.morin.1998@free.fr:
- don't sub-shell in the script
- merge all 3 sed calls into one
- create dest file with the sed, don't cp first
- also substitute HOST_DIR
- fix shellcheck
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump U-Boot to version 2023.04 and remove the patch that has already
been upstreamed.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The kernel config board/qemu/aarch64-sbsa/linux.config has never been in
use by qemu_aarch64_sbsa_defconfig, neither via
BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE, nor via
BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES.
test_edk2.py is using the kernel config
board/qemu/aarch64-sbsa/linux.config. However, storing a kernel config
that is not used by qemu_aarch64_sbsa_defconfig, in a directory that is
"owned" by qemu_aarch64_sbsa_defconfig, is bound to cause confusion.
Therefore, move the config file to a new subdirectory:
support/testing/tests/boot/test_edk2/
This is similar to how e.g. test_grub.py has a subdirectory:
support/testing/tests/boot/test_grub/
where it keeps the kernel config that is only used by test_grub.py.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
ARM SBBR (Server Base Boot Requirements) defines SPCR (Serial Port
Console Redirection Table) as a mandatory ACPI table that specifies
the configuration of a serial console.
In the linux kernel, ARM developers have decided that consoles defined
by SPCR are always enabled when existing, see e.g.:
https://lore.kernel.org/linux-serial/20200430161438.17640-1-alpernebiyasak@gmail.com/T/
Specifying console=ttyAMA0 (which is a serial console) is thus
redundant for an ARM SBSA board. (It also blindly assumes that
the serial console is on ttyAMA0, which might not be true.)
Drop the explicit console=ttyAMA0 on the kernel command line,
such that the kernel can pick up the default console defined
by SPCR.
This is similar to how it is currently done for
board/aarch64-efi/grub.cfg.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Specifying /dev/sda2 is ambigious, and when booting my arm64 machine
this tries to mount the second partition of my ATA drive, instead of
the second partition of the USB-stick, simply because the ATA driver
is probed earlier than the USB controller driver.
To solve this problem, use PARTLABEL=root to specify the root filesystem.
This is similar to how it is currently done for board/aarch64-efi/grub.cfg
and board/qemu/aarch64-ebbr/grub.cfg.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Bump Linux kernel to v6.1.13 and increase the rootfs size accordingly.
- Bump the FVP in the readme to version 11.20 build 15 and update the
command line.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Bump Linux kernel version to 6.1.12.
- Bump U-Boot version to 2023.01 and rename config fragment to make it
clearer that it is not a complete config file.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a link to RVspace Documentation Center, which did not exist
when readme.txt was first submitted. It provides datasheet, quick
start, schematics, and so on.
Signed-off-by: Francois Dugast <francois.dugast.foss@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
During the last U-boot version bump it's not been noted that the TPL
was not prepended to SPL anymore preventing the board to boot, so
let's copy TPL to the image folder, prepend it to u-boot-spl-dtb.bin
and place it at offset 32KB, where RK3288 bootrom expects to find
it. Let's also place u-boot-dtb separated from SPL at offset 8M, where
the SPL expects it to find it.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Starting from version 2021.10 only distro booting is supported, as
reported by commit ff8f277e9121 ("ti: am335x_evm: Switch to DISTRO_BOOT only").
The patch allows to update U-Boot to versions later than 2021.10.
Tested on beaglebone black.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If using BR2_LINUX_KERNEL_CUSTOM_DTS_PATH to copy .dts files from
buildroot into the linux tree, these .dts files are copied to
arch/arm64/boot. Unfortunately, the post-image.sh script expects to find
them in arch/arm64/boot/xilinx.
This patch does not require the xilinx/ prefix to be present when
symlinking the device-tree to system.dtb where u-boot expects to find
it.
It is effectively applying the below patch for zynqmp to versal as well:
https://patchwork.ozlabs.org/project/buildroot/patch/20230201195956.1758827-1-gsmecher@threespeedlogic.com/
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If using BR2_LINUX_KERNEL_CUSTOM_DTS_PATH to copy .dts files from
buildroot into the linux tree, these .dts files are copied to
arch/arm64/boot. Unfortunately, the post-image.sh script expects to find
them in arch/arm64/boot/xilinx.
This patch does not require the xilinx/ prefix to be present when
symlinking the device-tree to system.dtb where u-boot expects to find
it.
Signed-off-by: Graeme Smecher <gsmecher@threespeedlogic.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a defconfig to build a 32b ARMv7-A U-Boot based firmware implementing
the subset of UEFI defined by EBBR[1], as well as a Linux OS disk image
booting with UEFI, to run on Qemu.
The generated firmware binary can also be used to install or run another OS
supporting the EBBR specification.
[1]: https://github.com/ARM-software/ebbr
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds support for the BeagleBone Green Wireless to the
existing beaglebone_defconfig, by making sure the relevant Device Tree
is built and installed.
Signed-off-by: Ramon Crichlow <rcrichlow9000@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reduce the configs in the kria/uboot.fragment to only what is necessary.
These 4 configs are already included in the xilinx_zynqmp_virt_defconfig, so
it is redundant to include them in the kria/uboot.fragment file. Applying
this patch has zero impact on the u-boot binaries that are built.
This patch has been build and run tested on a kria kv260 starter kit.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Follow changes to other OrangePi boards, most importantly
orangepi-zero-plus2, which this board support is based on. This includes
switching to extlinux as boot mechanism and dropping custom U-Boot boot
script.
Rootfs image no longer fits into default 60M (mostly due to Linux
modules), so increase it to 120M.
While at it, bump Linux to 6.1.4 and U-Boot to 2023.01.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
http://freescale.com/ urls are all redirected to the NXP homepage
https://www.nxp.com/
Even if the link is not broken in the sense of a 404 http error, the
pointed resource is not found.
This commit updates the old freescale link to the correct nxp.com
location.
Note: the link now requires a free registration to be accessed.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
http://freescale.com/ urls are all redirected to the NXP homepage
https://www.nxp.com/
Even if the links are not broken in the sense of a 404 http error, the
pointed resources are not found.
This commit updates the old freescale links to the correct nxp.com
locations.
Note: the link to the SABRE for Automotive Infotainment Quick Start
Guide now requires a free registration to be accessed.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
http://freescale.com/ urls are all redirected to the NXP homepage
https://www.nxp.com/
Even if the link is not broken in the sense of a 404 http error, the
pointed resource is not found.
This commit updates the old Freescale link to the correct nxp.com
location.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add a defconfig for the Starfive VisionFive2 board, a board built around the
Starfive JH7110 RISC-V 64bit SoC.
This board comes with functional lowlevel and U-Boot bootloaders in SPI
flash. The defconfig reuses these and only builds a (5.15 based) kernel and
rootfs.
The factory shipped U-Boot is hard coded to look at MMC partition 3.
Signed-off-by: Francois Dugast <francois.dugast.foss@gmail.com>
[Peter: add to DEVELOPERS]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is now based on U-Boot 2022.10 and has gained SPL support, so use that
instead of sun20-d1-spl. With this we can also drop the u-boot patch and
patch directory.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch fixes a problem in the vck190 boot.bin generation as it should be
using the u-boot.dtb as the u-boot device tree and not the Linux system.dtb.
While both dtbs are basically the same, it is better not to mix this up.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since commit
5bbc20154e ("configs/zynqmp_kria_kv260_defconfig:
bump to Xilinx 2022.2"), we're using U-Boot version Xilinx 2022.2,
which already carries the psu_init_gpl.c, causing the build to fail as
our patch doesn't apply.
Fix this by dropping the no longer needed patch.
Fixes: 5bbc20154e ("configs/zynqmp_kria_kv260_defconfig: bump to Xilinx 2022.2")
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since commit
3c997c457a ("configs/zynqmp_zcu106_defconfig:
bump to Xilinx 2022.2"), we're using U-Boot version Xilinx 2022.2,
which already carries the psu_init_gpl.c, causing the build to fail as
our patch doesn't apply.
Fix this by dropping the no longer needed patch.
Fixes: 3c997c457a ("configs/zynqmp_zcu106_defconfig: bump to Xilinx 2022.2")
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch moves the board/zynqmp/kria/kv260/uboot.fragment file
to the board/zynqmp/kria directory. The reason is that this file
is the same for any kria starter kit and is not specific to the kv260.
By moving the file, it can be logically re-used with the kr260 when
support for this starter kit is added to buildroot.
KR260 Starter Kit:
https://www.xilinx.com/products/som/kria/kr260-robotics-starter-kit.html
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
