minidlna will detect and use the libiconv library if
the package is selected. In that case, we need to link
against -liconv.
Fixes the following linking problem:
tagutils/tagutils.o: In function `do_iconv.constprop.6':
tagutils.c:(.text+0x4d5c): undefined reference to `libiconv_open'
tagutils.c:(.text+0x4da0): undefined reference to `libiconv'
tagutils.c:(.text+0x4e08): undefined reference to `libiconv_close'
[Peter: wrap COMMON_LIBS line]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The NEON intrinsics used by Pulseaudio are only available in either
-mfloat-abi=softfp or -mfloat-abi=hard, not in
-mfloat-abi=soft. Therefore having NEON support in the processor is
not sufficient, we also should *not* be using soft-float.
Moreover, looking at BR2_ARM_ENABLE_NEON to know if the processor has
NEON support is incorrect. This option is only here to allow the user
to tell whether the processor has NEON support or not, for the ARM
cores that only have optional NEON support. Instead, the
BR2_ARM_CPU_HAS_NEON option really indicates whether NEON is available
or not (it is either set automatically by the ARM cores that always
have NEON support, or when BR2_ARM_ENABLE_NEON is enabled by the user
to confirm that his ARM processor has NEON support).
This fixes build failures such as
http://autobuild.buildroot.org/results/675/675c96059be348b594cc92980bef391126931c83/build-end.log
[Peter: add comment about reason for soft abi check]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The current code to set ABI on ARM does the following:
ifeq ($(BR2_arm)$(BR2_armeb),y)
... set ABI without 'hf' suffix ...
else ifeq ($(BR2_ARM_EABIHF),y)
... set ABI with 'hf' suffix ...
endif
But since $(BR2_arm)$(BR2_armeb) will always be 'y' in the cases where
BR2_ARM_EABIHF is 'y', it means that the 'else' part of the condition
will never be used.
Fix this by appending 'hf' to the ABI variable when BR2_ARM_EABIHF is
selected.
[Peter: put EABIhf handling under arm/armeb conditional for consistency]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Several of the lines in S50sshd script have a strange mix of spaces
and tabs, that at least do not look consistent with neighboring lines.
This patch makes the spacing consistent, and also strips the trailing
spaces.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The $(TARGET_DIR) variable is required when building
python-setuptools for the target otherwise the build system detects
the host installation which leads to permission error problems
like these:
Setuptools installation detected at /usr/lib64/python2.7/site-packages
Renaming /usr/lib64/python2.7/site-packages/setuptools-0.9.8-py2.7.egg-info to
/usr/lib64/python2.7/site-packages/setuptools-0.9.8-py2.7.egg-info.OLD.1377005697.88
OSError: [Errno 13] Permission denied
Moreover, remove the PYTHONPATH variable for host variant since it's
not needed.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Just like 'attr', 'acl' doesn't use automake to control the
build/installation of its components, and the static-only installation
process was not installing libacl.a. We add a patch that fixes this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
When attr is built static-only, it forgets to install its libattr.a
file, which leads to the build failure of packages such as 'acl' that
rely on attr.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
The Qt5 upstream URL has changed, which leads to build failures in the
autobuilders.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
See Source/WTF/wtf/Platform.h. Webkit is only supported for
arm, armeb, i386, mips, mipsel, powerpc, sh, sparc, x86_64.
[Thomas P: propagate dependency to the midori package.]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
While reviewing the eglibc package, Peter mentionned that it would be
good to add a comment that explains why we explicitly build eglibc
with -O2 instead of using the user selected optimization level. This
commit add such a comment.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The gpu-viv-bin-mx6q package selects BR2_PACKAGE_HAS_OPENGL_EGL and
BR2_PACKAGE_HAS_OPENGL_ES, so when it is enabled, Buildroot believes
that OpenGL and EGL support is available.
However, both libgles.mk and libegl.mk do not add the dependency on
gpu-viv-bin-mx6q, so when pulling the libgles or libegl dependencies,
the build fails due to the absence of an OpenGL implementation. This
commit fixes that.
Fixes the build failure at
http://autobuild.buildroot.org/results/dbd/dbd938914883a9e205f967f7b4b4a8a7dc7be117/build-end.log.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libgpgme has an internal implementation of argp parsing for when the
libc lacks such an implementation (i.e. uClibc).
However if it detects argp.h the internal implementation is disabled and
for a uClibc-based toolchain that breaks the build.
This happens when argp-standalone is installed since libgpgme never
tries to link to libargp.
Make it link against libargp, which also saves some target size. Fixes:
http://autobuild.buildroot.net/results/33c/33c5776d2b3f7fa276a27f7602eb71c4d77c7b62/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
