Removes BR2_PACKAGE_GPSD_PPS config option, since PPS functionality is
no longer optional and always enabled in gpsd's SCons configuration.
Removed passing ntpshm=y to SCons since that feature is also no longer
optional.
Added a patch adapted from changes merged upstream post-3.20 to fix a
build failure during cross-compilation when checking sizeof(time_t)
and where shared libraries were being linked with ld rather than g++.
Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch is not needed since version 3.19 and
e3ec42e08a
So drop this patch and set CCFLAGS
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: s/GPS_CFLAGS/GPSD_CFLAGS/ ]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
BlueZ 4.x is deprecated since a long time (BlueZ 5.x has been released
in 2012) so drop it.
For cwiid, sconeserver and ussp-push, replace bluez_utils by
bluez5_utils. All other packages already support bluez5_utils so just
drop bluez_utils.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit 57f85e52a7 ("package/gpsd:
unconditionally enable NTP time hinting support"), the option
BR2_PACKAGE_GPSD_NTP_SHM was removed, because NTP time hinting support
is now enabled unconditionally.
However, in one place, a select of this option was kept, which is
obviously no longer needed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix several issues with systemd service file installation for gpsd:
- systemd support in the gpsd build was defaulting to enabled or not
based on whether the host system had systemd directories present. Set
this explicitly based on whether BR2_INIT_SYSTEMD is set.
- The installed systemd service files referenced paths in /usr/local when
the actual binaries are installed in /usr. Replace /usr/local with /usr
in the installed service files.
- When BR2_PACKAGE_HAS_UDEV was enabled, all of the binaries were
re-installed again, along with the udev rules, as part of the
post-install hooks. This overwrites the service files that were just
fixed up. Since udev-install implies install, we can just call
udev-install.
Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The workaround for gcc's ICE works ok, but it's used if
BR2_microblaze=y with a local comment. Let's use
BR2_TOOLCHAIN_HAS_GCC_BUG_68485 instead to avoid repeating ICE bug
comment for every package affected by it.
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now that Qt4 is removed, the support in gpsd can be removed as well.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The upstream patch which disables the build-time systemctl call made it into
this release so removing it here. Also adding hash for the COPYING file.
Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The check-package script when ran gives warnings on text wrapping
on all of these Config files. This patch cleans up all warnings
related to the text wrapping for the Config files starting with
the letter g in the package directory.
The appropriate indentation is: <tab><2 spaces><62 chars>
See http://nightly.buildroot.org/#writing-rules-config-in for more
information.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When building on a systemd-based host for a systemd-based target, gpsd's
buildsystem will try to tell systemd to reload the its configuration and
recreate the entire dependency tree of services.
Of course, this can not work when run as a user:
>>> gpsd 3.16 Installing to target
==== AUTHENTICATING FOR org.freedesktop.systemd1.reload-daemon ===
Authentication is required to reload the systemd state.
Authenticating as: root
Password:
In fact, this does not even mean anything in cross-compilation.
Fortunately, upstream has already fixed their sin, so we backport it
(tweaked to apply onto 3.16).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for BSD-3c is BSD-3-Clause.
This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/BSD-3c/BSD-3-Clause/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since there were multiple sub-menus, their prompts are turned into
comments.
Some option were missing a prompt, so add one; switch integer options to
use the 'int' type instead of 'string'. Add separating lines around
options.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
GPSD has the ability to support KPPS. Its enablement is determined
primarily from the existence of `sys/timepps.h`. This file is provided
from the pps-tools package. Adjusting GPSD's Makefile to depend on the
pps-tools package if a developer has included pps-tools as part of a
build.
Signed-off-by: James Knight <james.knight@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Adjust a generated udev rule file (25-gpsd.rules) to have user write
permissions. This is to prevent rebuild issues when the gpsd package
fails to re-install on a target (since the `cp` of the rule file will
fail due to permissions).
[Thomas: minor tweaks to code comments and commit title.]
Signed-off-by: James Knight <james.knight@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit backports upstream gpsd commit
3e25e2167beb3936de3986fad9b6c9bdec82b81f, which fixes the build of the
NMEA driver.
Fixes Buildroot bug #8401, reported by kevin.alden2@gmail.com.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
'echo -n' is not a POSIX construct (no flag support), we shoud use
'printf', especially in init script.
This patch was generated by the following command line:
git grep -l 'echo -n' -- `git ls-files | grep -v 'patch'` | xargs sed -i 's/echo -n/printf/'
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop upstream patches #1 and #3. Drop the no longer needed patch #2.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
No need to duplicate the host-pkgconf dependency on the Qt case, we
already depend on it in the general case.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
