As we discussed on the mailing list, using $(<pkg>_NAME) when defining
CPE ID variables feels a bit odd and needlessly complicated. Just use
the package name directly.
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 7105e65cd6 ("package/openvpn:
adds target install of systemd unit files") added the installation of
systemd unit files. But in fact, they can be installed by openvpn's
build system. It was simply not working due to the custom install step
implemented in openvpn.mk.
So instead, let's have the autotools-package infra call "make
install", which properly installs everything that's needed for
openvpn, including systemd units, but also plugins, etc.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Disable unit-tests which are enabled by default if cmocka is found:
222e691739
- Drop --enable-iproute2 to enable netlink(3) support (and so drop
IFCONFIG, IPROUTE and ROUTE environment variables and keep NETSTAT
even if it is only used by tests/t_client.sh.in).
netlink is much faster than calling ifconfig or route and also enables
OpenVPN to run with less privileges.
- Update indentation in hash file (two spaces)
https://github.com/OpenVPN/openvpn/blob/release/2.5/Changes.rst
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
mbedtls (former polarssl) support was dropped with commit
3380da69c5
Put it back as openvpn supports mbedtls 2.x since version 2.4.0 and
86d8cd6860
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If the pkcs11-helper package is selected, add the package to the
dependency list and explicitly set --enable-pkcs11.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If the linux-pam package is selected, add the package to the
dependency list and explicitly set --enable-plugin-auth-pam.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If the libselinux package is selected, add the package to the
dependency list and explicitly set --enable-selinux.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
If the systemd package is selected, add the package to the
dependency list and explicitly set --enable-systemd.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Note that CVE-2018-9336 fixed in this version does not affect Buildroot
since it is Windows specific.
Drop interoperability with older busybox versions. We removed support
for busybox version selection long ago.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Replace the DAEMON variable, which was used only once, by the full path
of the binary file.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We want to use SPDX identifier for license strings as much as possible.
SPDX short identifier for GPLv2/GPLv2+ is GPL-2.0/GPL-2.0+.
This change is done by using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/\<GPLv2\>/GPL-2.0/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2.4.0 added lz4 support. Make that choice explicit or the bundled compat-lz4
"stub" will be used.
Signed-off-by: Jeroen Roovers <jer@airfi.aero>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
--enable-password-save option has been removed
(9ffd00e754). Since
it now defaults to "enabled" in the upstream package, there is no
point in adding Config.in.legacy support for it: Config.in.legacy
logic only kicks in when the option is enabled, but the upstream
package precisely preserve the compatibility with this situation.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we need to bump openvpn to version 2.3.11 for security fixes
the time has come to remove the polarssl option.
Add legacy handling explaining the situation:
PolarSSL 1.2.x can coexist with mbedTLS 2.x+, but OpenVPN requires
PolarSSL/mbedTLS 1.3.x (the transition branch) >= 1.3.8 but doesn't
build/work with the 2.x series. And PolarSSL/mbedTLS 1.3.x can't coexist
with mbedTLS 2.x on the same target.
So, unfortunately, openssl is now the only option (until libressl
arrives) which means no more backend options in general.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
'echo -n' is not a POSIX construct (no flag support), we shoud use
'printf', especially in init script.
This patch was generated by the following command line:
git grep -l 'echo -n' -- `git ls-files | grep -v 'patch'` | xargs sed -i 's/echo -n/printf/'
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Added configuration option BR2_PACKAGE_OPENVPN_PWSAVE that
adds --enable-password-save to OPENVPN_CONF_OPTS if selected.
[Thomas: rewrap Config.in help text, as suggested by Vicente.]
Signed-off-by: Andreas Wetzel <andreas.wetzel@nanotronic.ch>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since a while, the semantic of BR2_PREFER_STATIC_LIB has been changed
from "prefer static libraries when possible" to "use only static
libraries". The former semantic didn't make much sense, since the user
had absolutely no control/idea of which package would use static
libraries, and which packages would not. Therefore, for quite some
time, we have been starting to enforce that BR2_PREFER_STATIC_LIB
should really build everything with static libraries.
As a consequence, this patch renames BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS, and adjust the Config.in option accordingly.
This also helps preparing the addition of other options to select
shared, shared+static or just static.
Note that we have verified that this commit can be reproduced by
simply doing a global rename of BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS plus adding BR2_PREFER_STATIC_LIB to Config.in.legacy.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
A lot of packages ignored BR2_ENABLE_DEBUG. This patch simplifies the handling of
this option by adding the corresponding configure option to the global Makefile
for target packages.
For host packages --disable-debug is added to the global Makefile.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS,
make the same change for FOO_CONF_OPT.
Sed command used:
find * -type f | xargs sed -i 's#_CONF_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The correct capitalised form appears to be "BusyBox" rather than "Busybox";
fix all references to the latter form. (Most such references occur in the
manual and in commentary in package makefiles.)
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
